Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1750 commits) ixgbe: Allow Priority Flow Control settings to survive a device reset net: core: remove unneeded include in net/core/utils.c. e1000e: update version number e1000e: fix close interrupt race e1000e: fix loss of multicast packets e1000e: commonize tx cleanup routine to match e1000 & igb netfilter: fix nf_logger name in ebt_ulog. netfilter: fix warning in ebt_ulog init function. netfilter: fix warning about invalid const usage e1000: fix close race with interrupt e1000: cleanup clean_tx_irq routine so that it completely cleans ring e1000: fix tx hang detect logic and address dma mapping issues bridge: bad error handling when adding invalid ether address bonding: select current active slave when enslaving device for mode tlb and alb gianfar: reallocate skb when headroom is not enough for fcb Bump release date to 25Mar2009 and version to 0.22 r6040: Fix second PHY address qeth: fix wait_event_timeout handling qeth: check for completion of a running recovery qeth: unregister MAC addresses during recovery. ... Manually fixed up conflicts in: drivers/infiniband/hw/cxgb3/cxio_hal.h drivers/infiniband/hw/nes/nes_nic.c
author: Linus Torvalds <torvalds@linux-foundation.org> 2009-03-26 15:54:36 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2009-03-26 15:54:36 -0700
commit: 13220a94d35708d5378114e96ffcc88d0a74fe99 (patch)
tree: be6530677d5f9536c7211e05ba012923e4c0b307 /include
parent: 8690d8a9f6c2d5728a9c9f68231f1bb4de109e3a (diff)
parent: 08abe18af1f78ee80c3c3a5ac47c3e0ae0beadf6 (diff)
108 files changed, 2881 insertions, 1694 deletions
diff --git a/include/asm-frv/socket.h b/include/asm-frv/socket.h
index e51ca67b935..57c3d4054e8 100644
--- a/include/asm-frv/socket.h
+++ b/include/asm-frv/socket.h
@@ -54,5 +54,8 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif /* _ASM_SOCKET_H */
 
diff --git a/include/asm-m32r/socket.h b/include/asm-m32r/socket.h
index 9a0e2001222..be7ed589af5 100644
--- a/include/asm-m32r/socket.h
+++ b/include/asm-m32r/socket.h
@@ -54,4 +54,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif /* _ASM_M32R_SOCKET_H */
diff --git a/include/asm-mn10300/socket.h b/include/asm-mn10300/socket.h
index 80af9c4ccad..fb5daf438ec 100644
--- a/include/asm-mn10300/socket.h
+++ b/include/asm-mn10300/socket.h
@@ -54,4 +54,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif /* _ASM_SOCKET_H */
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 106c3ba5084..e9581fd9fb6 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -115,6 +115,7 @@ header-y += mqueue.h
 header-y += mtio.h
 header-y += ncp_no.h
 header-y += neighbour.h
+header-y += net_dropmon.h
 header-y += netfilter_arp.h
 header-y += netrom.h
 header-y += nfs2.h
diff --git a/include/linux/arcdevice.h b/include/linux/arcdevice.h
index a1916078fd0..cd4bcb6989c 100644
--- a/include/linux/arcdevice.h
+++ b/include/linux/arcdevice.h
@@ -235,8 +235,6 @@ struct Outgoing {
 
 
 struct arcnet_local {
-	struct net_device_stats stats;
-
 	uint8_t config,		/* current value of CONFIG register */
 		timeout,	/* Extended timeout for COM20020 */
 		backplane,	/* Backplane flag for COM20020 */
@@ -335,7 +333,12 @@ void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc);
 
 void arcnet_unregister_proto(struct ArcProto *proto);
 irqreturn_t arcnet_interrupt(int irq, void *dev_id);
-struct net_device *alloc_arcdev(char *name);
+struct net_device *alloc_arcdev(const char *name);
+
+int arcnet_open(struct net_device *dev);
+int arcnet_close(struct net_device *dev);
+int arcnet_send_packet(struct sk_buff *skb, struct net_device *dev);
+void arcnet_timeout(struct net_device *dev);
 
 #endif				/* __KERNEL__ */
 #endif				/* _LINUX_ARCDEVICE_H */
diff --git a/include/linux/ath9k_platform.h b/include/linux/ath9k_platform.h
new file mode 100644
index 00000000000..b847fc7b93f
--- /dev/null
+++ b/include/linux/ath9k_platform.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _LINUX_ATH9K_PLATFORM_H
+#define _LINUX_ATH9K_PLATFORM_H
+
+#define ATH9K_PLAT_EEP_MAX_WORDS	2048
+
+struct ath9k_platform_data {
+	u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS];
+};
+
+#endif /* _LINUX_ATH9K_PLATFORM_H */
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index f88d32f8ff7..573819ef4cc 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -22,8 +22,109 @@ typedef u64 cycle_t;
 struct clocksource;
 
 /**
+ * struct cyclecounter - hardware abstraction for a free running counter
+ *	Provides completely state-free accessors to the underlying hardware.
+ *	Depending on which hardware it reads, the cycle counter may wrap
+ *	around quickly. Locking rules (if necessary) have to be defined
+ *	by the implementor and user of specific instances of this API.
+ *
+ * @read:		returns the current cycle value
+ * @mask:		bitmask for two's complement
+ *			subtraction of non 64 bit counters,
+ *			see CLOCKSOURCE_MASK() helper macro
+ * @mult:		cycle to nanosecond multiplier
+ * @shift:		cycle to nanosecond divisor (power of two)
+ */
+struct cyclecounter {
+	cycle_t (*read)(const struct cyclecounter *cc);
+	cycle_t mask;
+	u32 mult;
+	u32 shift;
+};
+
+/**
+ * struct timecounter - layer above a %struct cyclecounter which counts nanoseconds
+ *	Contains the state needed by timecounter_read() to detect
+ *	cycle counter wrap around. Initialize with
+ *	timecounter_init(). Also used to convert cycle counts into the
+ *	corresponding nanosecond counts with timecounter_cyc2time(). Users
+ *	of this code are responsible for initializing the underlying
+ *	cycle counter hardware, locking issues and reading the time
+ *	more often than the cycle counter wraps around. The nanosecond
+ *	counter will only wrap around after ~585 years.
+ *
+ * @cc:			the cycle counter used by this instance
+ * @cycle_last:		most recent cycle counter value seen by
+ *			timecounter_read()
+ * @nsec:		continuously increasing count
+ */
+struct timecounter {
+	const struct cyclecounter *cc;
+	cycle_t cycle_last;
+	u64 nsec;
+};
+
+/**
+ * cyclecounter_cyc2ns - converts cycle counter cycles to nanoseconds
+ * @tc:		Pointer to cycle counter.
+ * @cycles:	Cycles
+ *
+ * XXX - This could use some mult_lxl_ll() asm optimization. Same code
+ * as in cyc2ns, but with unsigned result.
+ */
+static inline u64 cyclecounter_cyc2ns(const struct cyclecounter *cc,
+				      cycle_t cycles)
+{
+	u64 ret = (u64)cycles;
+	ret = (ret * cc->mult) >> cc->shift;
+	return ret;
+}
+
+/**
+ * timecounter_init - initialize a time counter
+ * @tc:			Pointer to time counter which is to be initialized/reset
+ * @cc:			A cycle counter, ready to be used.
+ * @start_tstamp:	Arbitrary initial time stamp.
+ *
+ * After this call the current cycle register (roughly) corresponds to
+ * the initial time stamp. Every call to timecounter_read() increments
+ * the time stamp counter by the number of elapsed nanoseconds.
+ */
+extern void timecounter_init(struct timecounter *tc,
+			     const struct cyclecounter *cc,
+			     u64 start_tstamp);
+
+/**
+ * timecounter_read - return nanoseconds elapsed since timecounter_init()
+ *                    plus the initial time stamp
+ * @tc:          Pointer to time counter.
+ *
+ * In other words, keeps track of time since the same epoch as
+ * the function which generated the initial time stamp.
+ */
+extern u64 timecounter_read(struct timecounter *tc);
+
+/**
+ * timecounter_cyc2time - convert a cycle counter to same
+ *                        time base as values returned by
+ *                        timecounter_read()
+ * @tc:		Pointer to time counter.
+ * @cycle:	a value returned by tc->cc->read()
+ *
+ * Cycle counts that are converted correctly as long as they
+ * fall into the interval [-1/2 max cycle count, +1/2 max cycle count],
+ * with "max cycle count" == cs->mask+1.
+ *
+ * This allows conversion of cycle counter values which were generated
+ * in the past.
+ */
+extern u64 timecounter_cyc2time(struct timecounter *tc,
+				cycle_t cycle_tstamp);
+
+/**
  * struct clocksource - hardware abstraction for a free running counter
  *	Provides mostly state-free accessors to the underlying hardware.
+ *	This is the structure used for system time.
  *
  * @name:		ptr to clocksource name
  * @list:		list head for registration
diff --git a/include/linux/com20020.h b/include/linux/com20020.h
index ac6d9a43e08..5dcfb944b6c 100644
--- a/include/linux/com20020.h
+++ b/include/linux/com20020.h
@@ -29,6 +29,7 @@
 
 int com20020_check(struct net_device *dev);
 int com20020_found(struct net_device *dev, int shared);
+extern const struct net_device_ops com20020_netdev_ops;
 
 /* The number of low I/O ports used by the card. */
 #define ARCNET_TOTAL_SIZE 8
diff --git a/include/linux/connector.h b/include/linux/connector.h
index 34f2789d9b9..fc65d219d88 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -109,6 +109,12 @@ struct cn_queue_dev {
 	unsigned char name[CN_CBQ_NAMELEN];
 
 	struct workqueue_struct *cn_queue;
+	/* Sent to kevent to create cn_queue only when needed */
+	struct work_struct wq_creation;
+	/* Tell if the wq_creation job is pending/completed */
+	atomic_t wq_requested;
+	/* Wait for cn_queue to be created */
+	wait_queue_head_t wq_created;
 
 	struct list_head queue_list;
 	spinlock_t queue_lock;
@@ -164,6 +170,8 @@ int cn_netlink_send(struct cn_msg *, u32, gfp_t);
 int cn_queue_add_callback(struct cn_queue_dev *dev, char *name, struct cb_id *id, void (*callback)(void *));
 void cn_queue_del_callback(struct cn_queue_dev *dev, struct cb_id *id);
 
+int queue_cn_work(struct cn_callback_entry *cbq, struct work_struct *work);
+
 struct cn_queue_dev *cn_queue_alloc_dev(char *name, struct sock *);
 void cn_queue_free_dev(struct cn_queue_dev *dev);
 
diff --git a/include/linux/dccp.h b/include/linux/dccp.h
index 61734e27abb..7434a8353e2 100644
--- a/include/linux/dccp.h
+++ b/include/linux/dccp.h
@@ -355,46 +355,6 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb)
 	return __dccp_hdr_len(dccp_hdr(skb));
 }
 
-
-/* initial values for each feature */
-#define DCCPF_INITIAL_SEQUENCE_WINDOW		100
-#define DCCPF_INITIAL_ACK_RATIO			2
-#define DCCPF_INITIAL_CCID			DCCPC_CCID2
-/* FIXME: for now we're default to 1 but it should really be 0 */
-#define DCCPF_INITIAL_SEND_NDP_COUNT		1
-
-/**
-  * struct dccp_minisock - Minimal DCCP connection representation
-  *
-  * Will be used to pass the state from dccp_request_sock to dccp_sock.
-  *
-  * @dccpms_sequence_window - Sequence Window Feature (section 7.5.2)
-  * @dccpms_pending - List of features being negotiated
-  * @dccpms_conf -
-  */
-struct dccp_minisock {
-	__u64			dccpms_sequence_window;
-	struct list_head	dccpms_pending;
-	struct list_head	dccpms_conf;
-};
-
-struct dccp_opt_conf {
-	__u8			*dccpoc_val;
-	__u8			dccpoc_len;
-};
-
-struct dccp_opt_pend {
-	struct list_head	dccpop_node;
-	__u8			dccpop_type;
-	__u8			dccpop_feat;
-	__u8		        *dccpop_val;
-	__u8			dccpop_len;
-	int			dccpop_conf;
-	struct dccp_opt_conf    *dccpop_sc;
-};
-
-extern void dccp_minisock_init(struct dccp_minisock *dmsk);
-
 /**
  * struct dccp_request_sock  -  represent DCCP-specific connection request
  * @dreq_inet_rsk: structure inherited from
@@ -483,13 +443,14 @@ struct dccp_ackvec;
  * @dccps_timestamp_time - time of receiving latest @dccps_timestamp_echo
  * @dccps_l_ack_ratio - feature-local Ack Ratio
  * @dccps_r_ack_ratio - feature-remote Ack Ratio
+ * @dccps_l_seq_win - local Sequence Window (influences ack number validity)
+ * @dccps_r_seq_win - remote Sequence Window (influences seq number validity)
  * @dccps_pcslen - sender   partial checksum coverage (via sockopt)
  * @dccps_pcrlen - receiver partial checksum coverage (via sockopt)
  * @dccps_send_ndp_count - local Send NDP Count feature (7.7.2)
  * @dccps_ndp_count - number of Non Data Packets since last data packet
  * @dccps_mss_cache - current value of MSS (path MTU minus header sizes)
  * @dccps_rate_last - timestamp for rate-limiting DCCP-Sync (RFC 4340, 7.5.4)
- * @dccps_minisock - associated minisock (accessed via dccp_msk)
  * @dccps_featneg - tracks feature-negotiation state (mostly during handshake)
  * @dccps_hc_rx_ackvec - rx half connection ack vector
  * @dccps_hc_rx_ccid - CCID used for the receiver (or receiving half-connection)
@@ -523,12 +484,13 @@ struct dccp_sock {
 	__u32				dccps_timestamp_time;
 	__u16				dccps_l_ack_ratio;
 	__u16				dccps_r_ack_ratio;
+	__u64				dccps_l_seq_win:48;
+	__u64				dccps_r_seq_win:48;
 	__u8				dccps_pcslen:4;
 	__u8				dccps_pcrlen:4;
 	__u8				dccps_send_ndp_count:1;
 	__u64				dccps_ndp_count:48;
 	unsigned long			dccps_rate_last;
-	struct dccp_minisock		dccps_minisock;
 	struct list_head		dccps_featneg;
 	struct dccp_ackvec		*dccps_hc_rx_ackvec;
 	struct ccid			*dccps_hc_rx_ccid;
@@ -546,11 +508,6 @@ static inline struct dccp_sock *dccp_sk(const struct sock *sk)
 	return (struct dccp_sock *)sk;
 }
 
-static inline struct dccp_minisock *dccp_msk(const struct sock *sk)
-{
-	return (struct dccp_minisock *)&dccp_sk(sk)->dccps_minisock;
-}
-
 static inline const char *dccp_role(const struct sock *sk)
 {
 	switch (dccp_sk(sk)->dccps_role) {
diff --git a/include/linux/errqueue.h b/include/linux/errqueue.h
index ceb1454b697..ec12cc74366 100644
--- a/include/linux/errqueue.h
+++ b/include/linux/errqueue.h
@@ -18,6 +18,7 @@ struct sock_extended_err
 #define SO_EE_ORIGIN_LOCAL	1
 #define SO_EE_ORIGIN_ICMP	2
 #define SO_EE_ORIGIN_ICMP6	3
+#define SO_EE_ORIGIN_TIMESTAMPING 4
 
 #define SO_EE_OFFENDER(ee)	((struct sockaddr*)((ee)+1))
 
diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
index 1cb0f0b9092..a1f17abba7d 100644
--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@@ -184,4 +184,25 @@ static inline unsigned compare_ether_addr_64bits(const u8 addr1[6+2],
 }
 #endif	/* __KERNEL__ */
 
+/**
+ * compare_ether_header - Compare two Ethernet headers
+ * @a: Pointer to Ethernet header
+ * @b: Pointer to Ethernet header
+ *
+ * Compare two ethernet headers, returns 0 if equal.
+ * This assumes that the network header (i.e., IP header) is 4-byte
+ * aligned OR the platform can handle unaligned access.  This is the
+ * case for all packets coming into netif_receive_skb or similar
+ * entry points.
+ */
+
+static inline int compare_ether_header(const void *a, const void *b)
+{
+	u32 *a32 = (u32 *)((u8 *)a + 2);
+	u32 *b32 = (u32 *)((u8 *)b + 2);
+
+	return (*(u16 *)a ^ *(u16 *)b) | (a32[0] ^ b32[0]) |
+	       (a32[1] ^ b32[1]) | (a32[2] ^ b32[2]);
+}
+
 #endif	/* _LINUX_ETHERDEVICE_H */
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 27c67a54223..131b127b70f 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -7,6 +7,7 @@
  * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
  *                                christopher.leech@intel.com,
  *                                scott.feldman@intel.com)
+ * Portions Copyright (C) Sun Microsystems 2008
  */
 
 #ifndef _LINUX_ETHTOOL_H
@@ -287,10 +288,75 @@ enum ethtool_flags {
 	ETH_FLAG_LRO		= (1 << 15),	/* LRO is enabled */
 };
 
-struct ethtool_rxnfc {
-	__u32		cmd;
+/* The following structures are for supporting RX network flow
+ * classification configuration. Note, all multibyte fields, e.g.,
+ * ip4src, ip4dst, psrc, pdst, spi, etc. are expected to be in network
+ * byte order.
+ */
+struct ethtool_tcpip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__be16	psrc;
+	__be16	pdst;
+	__u8    tos;
+};
+
+struct ethtool_ah_espip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__be32	spi;
+	__u8    tos;
+};
+
+struct ethtool_rawip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__u8	hdata[64];
+};
+
+struct ethtool_ether_spec {
+	__be16	ether_type;
+	__u8	frame_size;
+	__u8	eframe[16];
+};
+
+#define	ETH_RX_NFC_IP4	1
+#define	ETH_RX_NFC_IP6	2
+
+struct ethtool_usrip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__be32	l4_4_bytes;
+	__u8    tos;
+	__u8    ip_ver;
+	__u8    proto;
+};
+
+struct ethtool_rx_flow_spec {
 	__u32		flow_type;
-	__u64		data;
+	union {
+		struct ethtool_tcpip4_spec		tcp_ip4_spec;
+		struct ethtool_tcpip4_spec		udp_ip4_spec;
+		struct ethtool_tcpip4_spec		sctp_ip4_spec;
+		struct ethtool_ah_espip4_spec		ah_ip4_spec;
+		struct ethtool_ah_espip4_spec		esp_ip4_spec;
+		struct ethtool_rawip4_spec		raw_ip4_spec;
+		struct ethtool_ether_spec		ether_spec;
+		struct ethtool_usrip4_spec		usr_ip4_spec;
+		__u8					hdata[64];
+	} h_u, m_u; /* entry, mask */
+	__u64		ring_cookie;
+	__u32		location;
+};
+
+struct ethtool_rxnfc {
+	__u32				cmd;
+	__u32				flow_type;
+	/* The rx flow hash value or the rule DB size */
+	__u64				data;
+	struct ethtool_rx_flow_spec	fs;
+	__u32				rule_cnt;
+	__u32				rule_locs[0];
 };
 
 #ifdef __KERNEL__
@@ -417,8 +483,8 @@ struct ethtool_ops {
 	/* the following hooks are obsolete */
 	int	(*self_test_count)(struct net_device *);/* use get_sset_count */
 	int	(*get_stats_count)(struct net_device *);/* use get_sset_count */
-	int	(*get_rxhash)(struct net_device *, struct ethtool_rxnfc *);
-	int	(*set_rxhash)(struct net_device *, struct ethtool_rxnfc *);
+	int	(*get_rxnfc)(struct net_device *, struct ethtool_rxnfc *, void *);
+	int	(*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
 };
 #endif /* __KERNEL__ */
 
@@ -469,6 +535,12 @@ struct ethtool_ops {
 #define	ETHTOOL_SRXFH		0x0000002a /* Set RX flow hash configuration */
 #define ETHTOOL_GGRO		0x0000002b /* Get GRO enable (ethtool_value) */
 #define ETHTOOL_SGRO		0x0000002c /* Set GRO enable (ethtool_value) */
+#define	ETHTOOL_GRXRINGS	0x0000002d /* Get RX rings available for LB */
+#define	ETHTOOL_GRXCLSRLCNT	0x0000002e /* Get RX class rule count */
+#define	ETHTOOL_GRXCLSRULE	0x0000002f /* Get RX classification rule */
+#define	ETHTOOL_GRXCLSRLALL	0x00000030 /* Get all RX classification rule */
+#define	ETHTOOL_SRXCLSRLDEL	0x00000031 /* Delete RX classification rule */
+#define	ETHTOOL_SRXCLSRLINS	0x00000032 /* Insert RX classification rule */
 
 /* compatibility with older code */
 #define SPARC_ETH_GSET		ETHTOOL_GSET
@@ -565,9 +637,13 @@ struct ethtool_ops {
 #define	UDP_V6_FLOW	0x06
 #define	SCTP_V6_FLOW	0x07
 #define	AH_ESP_V6_FLOW	0x08
+#define	AH_V4_FLOW	0x09
+#define	ESP_V4_FLOW	0x0a
+#define	AH_V6_FLOW	0x0b
+#define	ESP_V6_FLOW	0x0c
+#define	IP_USER_FLOW	0x0d
 
 /* L3-L4 network traffic flow hash options */
-#define	RXH_DEV_PORT	(1 << 0)
 #define	RXH_L2DA	(1 << 1)
 #define	RXH_VLAN	(1 << 2)
 #define	RXH_L3_PROTO	(1 << 3)
@@ -577,5 +653,6 @@ struct ethtool_ops {
 #define	RXH_L4_B_2_3	(1 << 7) /* dst port in case of TCP/UDP/SCTP */
 #define	RXH_DISCARD	(1 << 31)
 
+#define	RX_CLS_FLOW_DISC	0xffffffffffffffffULL
 
 #endif /* _LINUX_ETHTOOL_H */
diff --git a/include/linux/gen_stats.h b/include/linux/gen_stats.h
index 13f4e74609a..0ffa41df0ee 100644
--- a/include/linux/gen_stats.h
+++ b/include/linux/gen_stats.h
@@ -22,7 +22,7 @@ struct gnet_stats_basic
 {
 	__u64	bytes;
 	__u32	packets;
-};
+} __attribute__ ((packed));
 
 /**
  * struct gnet_stats_rate_est - rate estimator
diff --git a/include/linux/hdlc.h b/include/linux/hdlc.h
index fd47a151665..6a6e701f163 100644
--- a/include/linux/hdlc.h
+++ b/include/linux/hdlc.h
@@ -38,6 +38,7 @@ struct hdlc_proto {
 	int (*ioctl)(struct net_device *dev, struct ifreq *ifr);
 	__be16 (*type_trans)(struct sk_buff *skb, struct net_device *dev);
 	int (*netif_rx)(struct sk_buff *skb);
+	int (*xmit)(struct sk_buff *skb, struct net_device *dev);
 	struct module *module;
 	struct hdlc_proto *next; /* next protocol in the list */
 };
@@ -102,6 +103,10 @@ static __inline__ void debug_frame(const struct sk_buff *skb)
 int hdlc_open(struct net_device *dev);
 /* Must be called by hardware driver when HDLC device is being closed */
 void hdlc_close(struct net_device *dev);
+/* May be used by hardware driver */
+int hdlc_change_mtu(struct net_device *dev, int new_mtu);
+/* Must be pointed to by hw driver's dev->netdev_ops->ndo_start_xmit */
+int hdlc_start_xmit(struct sk_buff *skb, struct net_device *dev);
 
 int attach_hdlc_protocol(struct net_device *dev, struct hdlc_proto *proto,
 			 size_t size);
diff --git a/include/linux/hdlcdrv.h b/include/linux/hdlcdrv.h
index bf6302f6b5f..c010b4a785b 100644
--- a/include/linux/hdlcdrv.h
+++ b/include/linux/hdlcdrv.h
@@ -215,7 +215,7 @@ struct hdlcdrv_state {
 
 	struct hdlcdrv_hdlctx {
 		struct hdlcdrv_hdlcbuffer hbuf;
-		long in_hdlc_tx;
+		unsigned long in_hdlc_tx;
 		/*
 		 * 0 = send flags
 		 * 1 = send txtail (flags)
@@ -241,7 +241,6 @@ struct hdlcdrv_state {
 	struct hdlcdrv_bitbuffer bitbuf_hdlc;
 #endif /* HDLCDRV_DEBUG */
 
-	struct net_device_stats stats;
 	int ptt_keyed;
 
 	/* queued skb for transmission */
diff --git a/include/linux/ibmtr.h b/include/linux/ibmtr.h
index 1c7a0dd5536..06695b74d40 100644
--- a/include/linux/ibmtr.h
+++ b/include/linux/ibmtr.h
@@ -207,7 +207,7 @@ struct tok_info {
 	unsigned short exsap_station_id;
 	unsigned short global_int_enable;
 	struct sk_buff *current_skb;
-	struct net_device_stats tr_stats;
+
 	unsigned char auto_speedsave;
 	open_state			open_status, sap_status;
 	enum {MANUAL, AUTOMATIC}	open_mode;
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index c4e6ca1a630..b1bb817d142 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -527,6 +527,8 @@ struct ieee80211_tim_ie {
 	u8 virtual_map[0];
 } __attribute__ ((packed));
 
+#define WLAN_SA_QUERY_TR_ID_LEN 16
+
 struct ieee80211_mgmt {
 	__le16 frame_control;
 	__le16 duration;
@@ -646,6 +648,10 @@ struct ieee80211_mgmt {
 					u8 action_code;
 					u8 variable[0];
 				} __attribute__((packed)) mesh_action;
+				struct {
+					u8 action;
+					u8 trans_id[WLAN_SA_QUERY_TR_ID_LEN];
+				} __attribute__ ((packed)) sa_query;
 			} u;
 		} __attribute__ ((packed)) action;
 	} u;
@@ -655,6 +661,15 @@ struct ieee80211_mgmt {
 #define IEEE80211_MIN_ACTION_SIZE offsetof(struct ieee80211_mgmt, u.action.u)
 
 
+/* Management MIC information element (IEEE 802.11w) */
+struct ieee80211_mmie {
+	u8 element_id;
+	u8 length;
+	__le16 key_id;
+	u8 sequence_number[6];
+	u8 mic[8];
+} __attribute__ ((packed));
+
 /* Control frames */
 struct ieee80211_rts {
 	__le16 frame_control;
@@ -899,6 +914,9 @@ enum ieee80211_statuscode {
 	/* 802.11g */
 	WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25,
 	WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26,
+	/* 802.11w */
+	WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY = 30,
+	WLAN_STATUS_ROBUST_MGMT_FRAME_POLICY_VIOLATION = 31,
 	/* 802.11i */
 	WLAN_STATUS_INVALID_IE = 40,
 	WLAN_STATUS_INVALID_GROUP_CIPHER = 41,
@@ -1018,6 +1036,8 @@ enum ieee80211_eid {
 	WLAN_EID_HT_INFORMATION = 61,
 	/* 802.11i */
 	WLAN_EID_RSN = 48,
+	WLAN_EID_TIMEOUT_INTERVAL = 56,
+	WLAN_EID_MMIE = 76 /* 802.11w */,
 	WLAN_EID_WPA = 221,
 	WLAN_EID_GENERIC = 221,
 	WLAN_EID_VENDOR_SPECIFIC = 221,
@@ -1030,6 +1050,8 @@ enum ieee80211_category {
 	WLAN_CATEGORY_QOS = 1,
 	WLAN_CATEGORY_DLS = 2,
 	WLAN_CATEGORY_BACK = 3,
+	WLAN_CATEGORY_PUBLIC = 4,
+	WLAN_CATEGORY_SA_QUERY = 8,
 	WLAN_CATEGORY_WMM = 17,
 };
 
@@ -1104,6 +1126,12 @@ struct ieee80211_country_ie_triplet {
 	};
 } __attribute__ ((packed));
 
+enum ieee80211_timeout_interval_type {
+	WLAN_TIMEOUT_REASSOC_DEADLINE = 1 /* 802.11r */,
+	WLAN_TIMEOUT_KEY_LIFETIME = 2 /* 802.11r */,
+	WLAN_TIMEOUT_ASSOC_COMEBACK = 3 /* 802.11w */,
+};
+
 /* BACK action code */
 enum ieee80211_back_actioncode {
 	WLAN_ACTION_ADDBA_REQ = 0,
@@ -1118,6 +1146,13 @@ enum ieee80211_back_parties {
 	WLAN_BACK_TIMER = 2,
 };
 
+/* SA Query action */
+enum ieee80211_sa_query_action {
+	WLAN_ACTION_SA_QUERY_REQUEST = 0,
+	WLAN_ACTION_SA_QUERY_RESPONSE = 1,
+};
+
+
 /* A-MSDU 802.11n */
 #define IEEE80211_QOS_CONTROL_A_MSDU_PRESENT 0x0080
 
@@ -1128,6 +1163,7 @@ enum ieee80211_back_parties {
 /* reserved: 				0x000FAC03 */
 #define WLAN_CIPHER_SUITE_CCMP		0x000FAC04
 #define WLAN_CIPHER_SUITE_WEP104	0x000FAC05
+#define WLAN_CIPHER_SUITE_AES_CMAC	0x000FAC06
 
 #define WLAN_MAX_KEY_LEN		32
 
@@ -1185,4 +1221,149 @@ static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr)
 		return hdr->addr1;
 }
 
+/**
+ * ieee80211_is_robust_mgmt_frame - check if frame is a robust management frame
+ * @hdr: the frame (buffer must include at least the first octet of payload)
+ */
+static inline bool ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr)
+{
+	if (ieee80211_is_disassoc(hdr->frame_control) ||
+	    ieee80211_is_deauth(hdr->frame_control))
+		return true;
+
+	if (ieee80211_is_action(hdr->frame_control)) {
+		u8 *category;
+
+		/*
+		 * Action frames, excluding Public Action frames, are Robust
+		 * Management Frames. However, if we are looking at a Protected
+		 * frame, skip the check since the data may be encrypted and
+		 * the frame has already been found to be a Robust Management
+		 * Frame (by the other end).
+		 */
+		if (ieee80211_has_protected(hdr->frame_control))
+			return true;
+		category = ((u8 *) hdr) + 24;
+		return *category != WLAN_CATEGORY_PUBLIC;
+	}
+
+	return false;
+}
+
+/**
+ * ieee80211_fhss_chan_to_freq - get channel frequency
+ * @channel: the FHSS channel
+ *
+ * Convert IEEE802.11 FHSS channel to frequency (MHz)
+ * Ref IEEE 802.11-2007 section 14.6
+ */
+static inline int ieee80211_fhss_chan_to_freq(int channel)
+{
+	if ((channel > 1) && (channel < 96))
+		return channel + 2400;
+	else
+		return -1;
+}
+
+/**
+ * ieee80211_freq_to_fhss_chan - get channel
+ * @freq: the channels frequency
+ *
+ * Convert frequency (MHz) to IEEE802.11 FHSS channel
+ * Ref IEEE 802.11-2007 section 14.6
+ */
+static inline int ieee80211_freq_to_fhss_chan(int freq)
+{
+	if ((freq > 2401) && (freq < 2496))
+		return freq - 2400;
+	else
+		return -1;
+}
+
+/**
+ * ieee80211_dsss_chan_to_freq - get channel center frequency
+ * @channel: the DSSS channel
+ *
+ * Convert IEEE802.11 DSSS channel to the center frequency (MHz).
+ * Ref IEEE 802.11-2007 section 15.6
+ */
+static inline int ieee80211_dsss_chan_to_freq(int channel)
+{
+	if ((channel > 0) && (channel < 14))
+		return 2407 + (channel * 5);
+	else if (channel == 14)
+		return 2484;
+	else
+		return -1;
+}
+
+/**
+ * ieee80211_freq_to_dsss_chan - get channel
+ * @freq: the frequency
+ *
+ * Convert frequency (MHz) to IEEE802.11 DSSS channel
+ * Ref IEEE 802.11-2007 section 15.6
+ *
+ * This routine selects the channel with the closest center frequency.
+ */
+static inline int ieee80211_freq_to_dsss_chan(int freq)
+{
+	if ((freq >= 2410) && (freq < 2475))
+		return (freq - 2405) / 5;
+	else if ((freq >= 2482) && (freq < 2487))
+		return 14;
+	else
+		return -1;
+}
+
+/* Convert IEEE802.11 HR DSSS channel to frequency (MHz) and back
+ * Ref IEEE 802.11-2007 section 18.4.6.2
+ *
+ * The channels and frequencies are the same as those defined for DSSS
+ */
+#define ieee80211_hr_chan_to_freq(chan) ieee80211_dsss_chan_to_freq(chan)
+#define ieee80211_freq_to_hr_chan(freq) ieee80211_freq_to_dsss_chan(freq)
+
+/* Convert IEEE802.11 ERP channel to frequency (MHz) and back
+ * Ref IEEE 802.11-2007 section 19.4.2
+ */
+#define ieee80211_erp_chan_to_freq(chan) ieee80211_hr_chan_to_freq(chan)
+#define ieee80211_freq_to_erp_chan(freq) ieee80211_freq_to_hr_chan(freq)
+
+/**
+ * ieee80211_ofdm_chan_to_freq - get channel center frequency
+ * @s_freq: starting frequency == (dotChannelStartingFactor/2) MHz
+ * @channel: the OFDM channel
+ *
+ * Convert IEEE802.11 OFDM channel to center frequency (MHz)
+ * Ref IEEE 802.11-2007 section 17.3.8.3.2
+ */
+static inline int ieee80211_ofdm_chan_to_freq(int s_freq, int channel)
+{
+	if ((channel > 0) && (channel <= 200) &&
+	    (s_freq >= 4000))
+		return s_freq + (channel * 5);
+	else
+		return -1;
+}
+
+/**
+ * ieee80211_freq_to_ofdm_channel - get channel
+ * @s_freq: starting frequency == (dotChannelStartingFactor/2) MHz
+ * @freq: the frequency
+ *
+ * Convert frequency (MHz) to IEEE802.11 OFDM channel
+ * Ref IEEE 802.11-2007 section 17.3.8.3.2
+ *
+ * This routine selects the channel with the closest center frequency.
+ */
+static inline int ieee80211_freq_to_ofdm_chan(int s_freq, int freq)
+{
+	if ((freq > (s_freq + 2)) && (freq <= (s_freq + 1202)) &&
+	    (s_freq >= 4000))
+		return (freq + 2 - s_freq) / 5;
+	else
+		return -1;
+}
+
 #endif /* LINUX_IEEE80211_H */
diff --git a/include/linux/if.h b/include/linux/if.h
index 2a6e29620a9..1108f3e099e 100644
--- a/include/linux/if.h
+++ b/include/linux/if.h
@@ -66,6 +66,7 @@
 #define IFF_SLAVE_NEEDARP 0x40		/* need ARPs for validation	*/
 #define IFF_ISATAP	0x80		/* ISATAP interface (RFC4214)	*/
 #define IFF_MASTER_ARPMON 0x100		/* bonding master, ARP mon in use */
+#define IFF_WAN_HDLC	0x200		/* WAN HDLC device		*/
 
 #define IF_GET_IFACE	0x0001		/* for querying only */
 #define IF_GET_PROTO	0x0002
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index 7f3c735f422..0216e1bdbc5 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -17,7 +17,7 @@
  *		as published by the Free Software Foundation; either version
  *		2 of the License, or (at your option) any later version.
  */
- 
+
 #ifndef _LINUX_IF_ETHER_H
 #define _LINUX_IF_ETHER_H
 
@@ -25,7 +25,7 @@
 
 /*
  *	IEEE 802.3 Ethernet magic constants.  The frame sizes omit the preamble
- *	and FCS/CRC (frame check sequence). 
+ *	and FCS/CRC (frame check sequence).
  */
 
 #define ETH_ALEN	6		/* Octets in one ethernet addr	 */
@@ -83,7 +83,7 @@
 /*
  *	Non DIX types. Won't clash for 1500 types.
  */
- 
+
 #define ETH_P_802_3	0x0001		/* Dummy type for 802.3 frames  */
 #define ETH_P_AX25	0x0002		/* Dummy protocol id for AX.25  */
 #define ETH_P_ALL	0x0003		/* Every packet (be careful!!!) */
@@ -109,7 +109,7 @@
 /*
  *	This is an Ethernet frame header.
  */
- 
+
 struct ethhdr {
 	unsigned char	h_dest[ETH_ALEN];	/* destination eth addr	*/
 	unsigned char	h_source[ETH_ALEN];	/* source ether addr	*/
diff --git a/include/linux/if_pppox.h b/include/linux/if_pppox.h
index 30c88b2245f..90b5fae5d71 100644
--- a/include/linux/if_pppox.h
+++ b/include/linux/if_pppox.h
@@ -95,16 +95,16 @@ struct pppoe_tag {
 } __attribute ((packed));
 
 /* Tag identifiers */
-#define PTT_EOL		__constant_htons(0x0000)
-#define PTT_SRV_NAME	__constant_htons(0x0101)
-#define PTT_AC_NAME	__constant_htons(0x0102)
-#define PTT_HOST_UNIQ	__constant_htons(0x0103)
-#define PTT_AC_COOKIE	__constant_htons(0x0104)
-#define PTT_VENDOR 	__constant_htons(0x0105)
-#define PTT_RELAY_SID	__constant_htons(0x0110)
-#define PTT_SRV_ERR     __constant_htons(0x0201)
-#define PTT_SYS_ERR  	__constant_htons(0x0202)
-#define PTT_GEN_ERR  	__constant_htons(0x0203)
+#define PTT_EOL		__cpu_to_be16(0x0000)
+#define PTT_SRV_NAME	__cpu_to_be16(0x0101)
+#define PTT_AC_NAME	__cpu_to_be16(0x0102)
+#define PTT_HOST_UNIQ	__cpu_to_be16(0x0103)
+#define PTT_AC_COOKIE	__cpu_to_be16(0x0104)
+#define PTT_VENDOR 	__cpu_to_be16(0x0105)
+#define PTT_RELAY_SID	__cpu_to_be16(0x0110)
+#define PTT_SRV_ERR     __cpu_to_be16(0x0201)
+#define PTT_SYS_ERR  	__cpu_to_be16(0x0202)
+#define PTT_GEN_ERR  	__cpu_to_be16(0x0203)
 
 struct pppoe_hdr {
 #if defined(__LITTLE_ENDIAN_BITFIELD)
diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h
index 8529f57ba26..049d6c9428d 100644
--- a/include/linux/if_tun.h
+++ b/include/linux/if_tun.h
@@ -46,6 +46,8 @@
 #define TUNSETOFFLOAD  _IOW('T', 208, unsigned int)
 #define TUNSETTXFILTER _IOW('T', 209, unsigned int)
 #define TUNGETIFF      _IOR('T', 210, unsigned int)
+#define TUNGETSNDBUF   _IOR('T', 211, int)
+#define TUNSETSNDBUF   _IOW('T', 212, int)
 
 /* TUNSETIFF ifr flags */
 #define IFF_TUN		0x0001
diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h
index 82c43624c06..5a9aae4adb4 100644
--- a/include/linux/if_tunnel.h
+++ b/include/linux/if_tunnel.h
@@ -16,14 +16,14 @@
 #define SIOCDELPRL      (SIOCDEVPRIVATE + 6)
 #define SIOCCHGPRL      (SIOCDEVPRIVATE + 7)
 
-#define GRE_CSUM	__constant_htons(0x8000)
-#define GRE_ROUTING	__constant_htons(0x4000)
-#define GRE_KEY		__constant_htons(0x2000)
-#define GRE_SEQ		__constant_htons(0x1000)
-#define GRE_STRICT	__constant_htons(0x0800)
-#define GRE_REC		__constant_htons(0x0700)
-#define GRE_FLAGS	__constant_htons(0x00F8)
-#define GRE_VERSION	__constant_htons(0x0007)
+#define GRE_CSUM	__cpu_to_be16(0x8000)
+#define GRE_ROUTING	__cpu_to_be16(0x4000)
+#define GRE_KEY		__cpu_to_be16(0x2000)
+#define GRE_SEQ		__cpu_to_be16(0x1000)
+#define GRE_STRICT	__cpu_to_be16(0x0800)
+#define GRE_REC		__cpu_to_be16(0x0700)
+#define GRE_FLAGS	__cpu_to_be16(0x00F8)
+#define GRE_VERSION	__cpu_to_be16(0x0007)
 
 struct ip_tunnel_parm
 {
diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h
index 06fcdb45106..acef2a770b6 100644
--- a/include/linux/inetdevice.h
+++ b/include/linux/inetdevice.h
@@ -108,6 +108,7 @@ static inline void ipv4_devconf_setall(struct in_device *in_dev)
 #define IN_DEV_ARPFILTER(in_dev)	IN_DEV_ORCONF((in_dev), ARPFILTER)
 #define IN_DEV_ARP_ANNOUNCE(in_dev)	IN_DEV_MAXCONF((in_dev), ARP_ANNOUNCE)
 #define IN_DEV_ARP_IGNORE(in_dev)	IN_DEV_MAXCONF((in_dev), ARP_IGNORE)
+#define IN_DEV_ARP_NOTIFY(in_dev)	IN_DEV_MAXCONF((in_dev), ARP_NOTIFY)
 
 struct in_ifaddr
 {
diff --git a/include/linux/mroute.h b/include/linux/mroute.h
index 8a455694d68..0d45b4e8d36 100644
--- a/include/linux/mroute.h
+++ b/include/linux/mroute.h
@@ -193,6 +193,9 @@ struct vif_device
 struct mfc_cache 
 {
 	struct mfc_cache *next;			/* Next entry on cache line 	*/
+#ifdef CONFIG_NET_NS
+	struct net *mfc_net;
+#endif
 	__be32 mfc_mcastgrp;			/* Group the entry belongs to 	*/
 	__be32 mfc_origin;			/* Source of packet 		*/
 	vifi_t mfc_parent;			/* Source interface		*/
@@ -215,6 +218,18 @@ struct mfc_cache
 	} mfc_un;
 };
 
+static inline
+struct net *mfc_net(const struct mfc_cache *mfc)
+{
+	return read_pnet(&mfc->mfc_net);
+}
+
+static inline
+void mfc_net_set(struct mfc_cache *mfc, struct net *net)
+{
+	write_pnet(&mfc->mfc_net, hold_net(net));
+}
+
 #define MFC_STATIC		1
 #define MFC_NOTIFY		2
 
@@ -241,7 +256,8 @@ struct mfc_cache
 
 #ifdef __KERNEL__
 struct rtmsg;
-extern int ipmr_get_route(struct sk_buff *skb, struct rtmsg *rtm, int nowait);
+extern int ipmr_get_route(struct net *net, struct sk_buff *skb,
+			  struct rtmsg *rtm, int nowait);
 #endif
 
 #endif
diff --git a/include/linux/ncp_no.h b/include/linux/ncp_no.h
index f56a696a7cc..cddaa48fb18 100644
--- a/include/linux/ncp_no.h
+++ b/include/linux/ncp_no.h
@@ -2,18 +2,18 @@
 #define _NCP_NO
 
 /* these define the attribute byte as seen by NCP */
-#define aRONLY			(__constant_cpu_to_le32(1))
-#define aHIDDEN			(__constant_cpu_to_le32(2))
-#define aSYSTEM			(__constant_cpu_to_le32(4))
-#define aEXECUTE		(__constant_cpu_to_le32(8))
-#define aDIR			(__constant_cpu_to_le32(0x10))
-#define aARCH			(__constant_cpu_to_le32(0x20))
-#define aSHARED			(__constant_cpu_to_le32(0x80))
-#define aDONTSUBALLOCATE	(__constant_cpu_to_le32(1L<<11))
-#define aTRANSACTIONAL		(__constant_cpu_to_le32(1L<<12))
-#define aPURGE			(__constant_cpu_to_le32(1L<<16))
-#define aRENAMEINHIBIT		(__constant_cpu_to_le32(1L<<17))
-#define aDELETEINHIBIT		(__constant_cpu_to_le32(1L<<18))
-#define aDONTCOMPRESS		(__constant_cpu_to_le32(1L<<27))
+#define aRONLY			(__cpu_to_le32(1))
+#define aHIDDEN			(__cpu_to_le32(2))
+#define aSYSTEM			(__cpu_to_le32(4))
+#define aEXECUTE		(__cpu_to_le32(8))
+#define aDIR			(__cpu_to_le32(0x10))
+#define aARCH			(__cpu_to_le32(0x20))
+#define aSHARED			(__cpu_to_le32(0x80))
+#define aDONTSUBALLOCATE	(__cpu_to_le32(1L<<11))
+#define aTRANSACTIONAL		(__cpu_to_le32(1L<<12))
+#define aPURGE			(__cpu_to_le32(1L<<16))
+#define aRENAMEINHIBIT		(__cpu_to_le32(1L<<17))
+#define aDELETEINHIBIT		(__cpu_to_le32(1L<<18))
+#define aDONTCOMPRESS		(__cpu_to_le32(1L<<27))
 
 #endif /* _NCP_NO */
diff --git a/include/linux/neighbour.h b/include/linux/neighbour.h
index 8730d5dae1b..12c9de13845 100644
--- a/include/linux/neighbour.h
+++ b/include/linux/neighbour.h
@@ -31,6 +31,7 @@ enum
  *	Neighbor Cache Entry Flags
  */
 
+#define NTF_USE		0x01
 #define NTF_PROXY	0x08	/* == ATF_PUBL */
 #define NTF_ROUTER	0x80
 
diff --git a/include/linux/net.h b/include/linux/net.h
index 4515efae4c3..4fc2ffd527f 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -129,11 +129,15 @@ struct socket {
 	socket_state		state;
 	short			type;
 	unsigned long		flags;
-	const struct proto_ops	*ops;
+	/*
+	 * Please keep fasync_list & wait fields in the same cache line
+	 */
 	struct fasync_struct	*fasync_list;
+	wait_queue_head_t	wait;
+
 	struct file		*file;
 	struct sock		*sk;
-	wait_queue_head_t	wait;
+	const struct proto_ops	*ops;
 };
 
 struct vm_area_struct;
diff --git a/include/linux/net_dropmon.h b/include/linux/net_dropmon.h
new file mode 100644
index 00000000000..0217fb81a63
--- /dev/null
+++ b/include/linux/net_dropmon.h
@@ -0,0 +1,56 @@
+#ifndef __NET_DROPMON_H
+#define __NET_DROPMON_H
+
+#include <linux/netlink.h>
+
+struct net_dm_drop_point {
+	__u8 pc[8];
+	__u32 count;
+};
+
+#define NET_DM_CFG_VERSION  0
+#define NET_DM_CFG_ALERT_COUNT  1
+#define NET_DM_CFG_ALERT_DELAY 2
+#define NET_DM_CFG_MAX 3
+
+struct net_dm_config_entry {
+	__u32 type;
+	__u64 data __attribute__((aligned(8)));
+};
+
+struct net_dm_config_msg {
+	__u32 entries;
+	struct net_dm_config_entry options[0];
+};
+
+struct net_dm_alert_msg {
+	__u32 entries;
+	struct net_dm_drop_point points[0];
+};
+
+struct net_dm_user_msg {
+	union {
+		struct net_dm_config_msg user;
+		struct net_dm_alert_msg alert;
+	} u;
+};
+
+
+/* These are the netlink message types for this protocol */
+
+enum {
+	NET_DM_CMD_UNSPEC = 0,
+	NET_DM_CMD_ALERT,
+	NET_DM_CMD_CONFIG,
+	NET_DM_CMD_START,
+	NET_DM_CMD_STOP,
+	_NET_DM_CMD_MAX,
+};
+
+#define NET_DM_CMD_MAX (_NET_DM_CMD_MAX - 1)
+
+/*
+ * Our group identifiers
+ */
+#define NET_DM_GRP_ALERT 1
+#endif
diff --git a/include/linux/net_tstamp.h b/include/linux/net_tstamp.h
new file mode 100644
index 00000000000..a3b8546354a
--- /dev/null
+++ b/include/linux/net_tstamp.h
@@ -0,0 +1,104 @@
+/*
+ * Userspace API for hardware time stamping of network packets
+ *
+ * Copyright (C) 2008,2009 Intel Corporation
+ * Author: Patrick Ohly <patrick.ohly@intel.com>
+ *
+ */
+
+#ifndef _NET_TIMESTAMPING_H
+#define _NET_TIMESTAMPING_H
+
+#include <linux/socket.h>   /* for SO_TIMESTAMPING */
+
+/* SO_TIMESTAMPING gets an integer bit field comprised of these values */
+enum {
+	SOF_TIMESTAMPING_TX_HARDWARE = (1<<0),
+	SOF_TIMESTAMPING_TX_SOFTWARE = (1<<1),
+	SOF_TIMESTAMPING_RX_HARDWARE = (1<<2),
+	SOF_TIMESTAMPING_RX_SOFTWARE = (1<<3),
+	SOF_TIMESTAMPING_SOFTWARE = (1<<4),
+	SOF_TIMESTAMPING_SYS_HARDWARE = (1<<5),
+	SOF_TIMESTAMPING_RAW_HARDWARE = (1<<6),
+	SOF_TIMESTAMPING_MASK =
+	(SOF_TIMESTAMPING_RAW_HARDWARE - 1) |
+	SOF_TIMESTAMPING_RAW_HARDWARE
+};
+
+/**
+ * struct hwtstamp_config - %SIOCSHWTSTAMP parameter
+ *
+ * @flags:	no flags defined right now, must be zero
+ * @tx_type:	one of HWTSTAMP_TX_*
+ * @rx_type:	one of one of HWTSTAMP_FILTER_*
+ *
+ * %SIOCSHWTSTAMP expects a &struct ifreq with a ifr_data pointer to
+ * this structure. dev_ifsioc() in the kernel takes care of the
+ * translation between 32 bit userspace and 64 bit kernel. The
+ * structure is intentionally chosen so that it has the same layout on
+ * 32 and 64 bit systems, don't break this!
+ */
+struct hwtstamp_config {
+	int flags;
+	int tx_type;
+	int rx_filter;
+};
+
+/* possible values for hwtstamp_config->tx_type */
+enum {
+	/*
+	 * No outgoing packet will need hardware time stamping;
+	 * should a packet arrive which asks for it, no hardware
+	 * time stamping will be done.
+	 */
+	HWTSTAMP_TX_OFF,
+
+	/*
+	 * Enables hardware time stamping for outgoing packets;
+	 * the sender of the packet decides which are to be
+	 * time stamped by setting %SOF_TIMESTAMPING_TX_SOFTWARE
+	 * before sending the packet.
+	 */
+	HWTSTAMP_TX_ON,
+};
+
+/* possible values for hwtstamp_config->rx_filter */
+enum {
+	/* time stamp no incoming packet at all */
+	HWTSTAMP_FILTER_NONE,
+
+	/* time stamp any incoming packet */
+	HWTSTAMP_FILTER_ALL,
+
+	/* return value: time stamp all packets requested plus some others */
+	HWTSTAMP_FILTER_SOME,
+
+	/* PTP v1, UDP, any kind of event packet */
+	HWTSTAMP_FILTER_PTP_V1_L4_EVENT,
+	/* PTP v1, UDP, Sync packet */
+	HWTSTAMP_FILTER_PTP_V1_L4_SYNC,
+	/* PTP v1, UDP, Delay_req packet */
+	HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ,
+	/* PTP v2, UDP, any kind of event packet */
+	HWTSTAMP_FILTER_PTP_V2_L4_EVENT,
+	/* PTP v2, UDP, Sync packet */
+	HWTSTAMP_FILTER_PTP_V2_L4_SYNC,
+	/* PTP v2, UDP, Delay_req packet */
+	HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ,
+
+	/* 802.AS1, Ethernet, any kind of event packet */
+	HWTSTAMP_FILTER_PTP_V2_L2_EVENT,
+	/* 802.AS1, Ethernet, Sync packet */
+	HWTSTAMP_FILTER_PTP_V2_L2_SYNC,
+	/* 802.AS1, Ethernet, Delay_req packet */
+	HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ,
+
+	/* PTP v2/802.AS1, any layer, any kind of event packet */
+	HWTSTAMP_FILTER_PTP_V2_EVENT,
+	/* PTP v2/802.AS1, any layer, Sync packet */
+	HWTSTAMP_FILTER_PTP_V2_SYNC,
+	/* PTP v2/802.AS1, any layer, Delay_req packet */
+	HWTSTAMP_FILTER_PTP_V2_DELAY_REQ,
+};
+
+#endif /* _NET_TIMESTAMPING_H */
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 659366734f3..be3ebd7e8ce 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -96,7 +96,7 @@ struct wireless_dev;
  *	Compute the worst case header length according to the protocols
  *	used.
  */
- 
+
 #if defined(CONFIG_WLAN_80211) || defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
 # if defined(CONFIG_MAC80211_MESH)
 #  define LL_MAX_HEADER 128
@@ -124,7 +124,7 @@ struct wireless_dev;
  *	Network device statistics. Akin to the 2.0 ether stats but
  *	with byte counters.
  */
- 
+
 struct net_device_stats
 {
 	unsigned long	rx_packets;		/* total packets received	*/
@@ -285,7 +285,7 @@ enum netdev_state_t
 
 /*
  * This structure holds at boot time configured netdevice settings. They
- * are then used in the device probing. 
+ * are then used in the device probing.
  */
 struct netdev_boot_setup {
 	char name[IFNAMSIZ];
@@ -314,6 +314,9 @@ struct napi_struct {
 	spinlock_t		poll_lock;
 	int			poll_owner;
 #endif
+
+	unsigned int		gro_count;
+
 	struct net_device	*dev;
 	struct list_head	dev_list;
 	struct sk_buff		*gro_list;
@@ -327,6 +330,14 @@ enum
 	NAPI_STATE_NPSVC,	/* Netpoll - don't dequeue from poll_list */
 };
 
+enum {
+	GRO_MERGED,
+	GRO_MERGED_FREE,
+	GRO_HELD,
+	GRO_NORMAL,
+	GRO_DROP,
+};
+
 extern void __napi_schedule(struct napi_struct *n);
 
 static inline int napi_disable_pending(struct napi_struct *n)
@@ -740,7 +751,7 @@ struct net_device
 	void			*dsa_ptr;	/* dsa specific data */
 #endif
 	void 			*atalk_ptr;	/* AppleTalk link 	*/
-	void			*ip_ptr;	/* IPv4 specific data	*/  
+	void			*ip_ptr;	/* IPv4 specific data	*/
 	void                    *dn_ptr;        /* DECnet specific data */
 	void                    *ip6_ptr;       /* IPv6 specific data */
 	void			*ec_ptr;	/* Econet specific data	*/
@@ -753,7 +764,7 @@ struct net_device
  */
 	unsigned long		last_rx;	/* Time of last Rx	*/
 	/* Interface address info used in eth_type_trans() */
-	unsigned char		dev_addr[MAX_ADDR_LEN];	/* hw address, (before bcast 
+	unsigned char		dev_addr[MAX_ADDR_LEN];	/* hw address, (before bcast
 							   because most packets are unicast) */
 
 	unsigned char		broadcast[MAX_ADDR_LEN];	/* hw bcast add	*/
@@ -984,6 +995,9 @@ void netif_napi_add(struct net_device *dev, struct napi_struct *napi,
 void netif_napi_del(struct napi_struct *napi);
 
 struct napi_gro_cb {
+	/* This indicates where we are processing relative to skb->data. */
+	int data_offset;
+
 	/* This is non-zero if the packet may be of the same flow. */
 	int same_flow;
 
@@ -1088,6 +1102,36 @@ extern int		dev_restart(struct net_device *dev);
 #ifdef CONFIG_NETPOLL_TRAP
 extern int		netpoll_trap(void);
 #endif
+extern void	      *skb_gro_header(struct sk_buff *skb, unsigned int hlen);
+extern int	       skb_gro_receive(struct sk_buff **head,
+				       struct sk_buff *skb);
+
+static inline unsigned int skb_gro_offset(const struct sk_buff *skb)
+{
+	return NAPI_GRO_CB(skb)->data_offset;
+}
+
+static inline unsigned int skb_gro_len(const struct sk_buff *skb)
+{
+	return skb->len - NAPI_GRO_CB(skb)->data_offset;
+}
+
+static inline void skb_gro_pull(struct sk_buff *skb, unsigned int len)
+{
+	NAPI_GRO_CB(skb)->data_offset += len;
+}
+
+static inline void skb_gro_reset_offset(struct sk_buff *skb)
+{
+	NAPI_GRO_CB(skb)->data_offset = 0;
+}
+
+static inline void *skb_gro_mac_header(struct sk_buff *skb)
+{
+	return skb_mac_header(skb) < skb->data ? skb_mac_header(skb) :
+	       page_address(skb_shinfo(skb)->frags[0].page) +
+	       skb_shinfo(skb)->frags[0].page_offset;
+}
 
 static inline int dev_hard_header(struct sk_buff *skb, struct net_device *dev,
 				  unsigned short type,
@@ -1376,12 +1420,15 @@ extern int		netif_receive_skb(struct sk_buff *skb);
 extern void		napi_gro_flush(struct napi_struct *napi);
 extern int		dev_gro_receive(struct napi_struct *napi,
 					struct sk_buff *skb);
+extern int		napi_skb_finish(int ret, struct sk_buff *skb);
 extern int		napi_gro_receive(struct napi_struct *napi,
 					 struct sk_buff *skb);
 extern void		napi_reuse_skb(struct napi_struct *napi,
 				       struct sk_buff *skb);
 extern struct sk_buff *	napi_fraginfo_skb(struct napi_struct *napi,
 					  struct napi_gro_fraginfo *info);
+extern int		napi_frags_finish(struct napi_struct *napi,
+					  struct sk_buff *skb, int ret);
 extern int		napi_gro_frags(struct napi_struct *napi,
 				       struct napi_gro_fraginfo *info);
 extern void		netif_nit_deliver(struct sk_buff *skb);
@@ -1575,56 +1622,6 @@ static inline u32 netif_msg_init(int debug_value, int default_msg_enable_bits)
 	return (1 << debug_value) - 1;
 }
 
-/* Test if receive needs to be scheduled but only if up */
-static inline int netif_rx_schedule_prep(struct napi_struct *napi)
-{
-	return napi_schedule_prep(napi);
-}
-
-/* Add interface to tail of rx poll list. This assumes that _prep has
- * already been called and returned 1.
- */
-static inline void __netif_rx_schedule(struct napi_struct *napi)
-{
-	__napi_schedule(napi);
-}
-
-/* Try to reschedule poll. Called by irq handler. */
-
-static inline void netif_rx_schedule(struct napi_struct *napi)
-{
-	if (netif_rx_schedule_prep(napi))
-		__netif_rx_schedule(napi);
-}
-
-/* Try to reschedule poll. Called by dev->poll() after netif_rx_complete().  */
-static inline int netif_rx_reschedule(struct napi_struct *napi)
-{
-	if (napi_schedule_prep(napi)) {
-		__netif_rx_schedule(napi);
-		return 1;
-	}
-	return 0;
-}
-
-/* same as netif_rx_complete, except that local_irq_save(flags)
- * has already been issued
- */
-static inline void __netif_rx_complete(struct napi_struct *napi)
-{
-	__napi_complete(napi);
-}
-
-/* Remove interface from poll list: it must be in the poll list
- * on current cpu. This primitive is called by dev->poll(), when
- * it completes the work. The device cannot be out of poll list at this
- * moment, it is BUG().
- */
-static inline void netif_rx_complete(struct napi_struct *napi)
-{
-	napi_complete(napi);
-}
-
 static inline void __netif_tx_lock(struct netdev_queue *txq, int cpu)
 {
 	spin_lock(&txq->_xmit_lock);
@@ -1875,7 +1872,7 @@ static inline int skb_bond_should_drop(struct sk_buff *skb)
 
 		if (dev->priv_flags & IFF_SLAVE_INACTIVE) {
 			if ((dev->priv_flags & IFF_SLAVE_NEEDARP) &&
-			    skb->protocol == __constant_htons(ETH_P_ARP))
+			    skb->protocol == __cpu_to_be16(ETH_P_ARP))
 				return 0;
 
 			if (master->priv_flags & IFF_MASTER_ALB) {
@@ -1884,7 +1881,7 @@ static inline int skb_bond_should_drop(struct sk_buff *skb)
 					return 0;
 			}
 			if (master->priv_flags & IFF_MASTER_8023AD &&
-			    skb->protocol == __constant_htons(ETH_P_SLOW))
+			    skb->protocol == __cpu_to_be16(ETH_P_SLOW))
 				return 0;
 
 			return 1;
diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild
index 5a8af875bce..af9d2fb9721 100644
--- a/include/linux/netfilter/Kbuild
+++ b/include/linux/netfilter/Kbuild
@@ -7,16 +7,21 @@ header-y += xt_CLASSIFY.h
 header-y += xt_CONNMARK.h
 header-y += xt_CONNSECMARK.h
 header-y += xt_DSCP.h
+header-y += xt_LED.h
 header-y += xt_MARK.h
 header-y += xt_NFLOG.h
 header-y += xt_NFQUEUE.h
 header-y += xt_RATEEST.h
 header-y += xt_SECMARK.h
 header-y += xt_TCPMSS.h
+header-y += xt_TCPOPTSTRIP.h
+header-y += xt_TPROXY.h
 header-y += xt_comment.h
 header-y += xt_connbytes.h
+header-y += xt_connlimit.h
 header-y += xt_connmark.h
 header-y += xt_conntrack.h
+header-y += xt_cluster.h
 header-y += xt_dccp.h
 header-y += xt_dscp.h
 header-y += xt_esp.h
@@ -30,6 +35,7 @@ header-y += xt_mark.h
 header-y += xt_multiport.h
 header-y += xt_owner.h
 header-y += xt_pkttype.h
+header-y += xt_quota.h
 header-y += xt_rateest.h
 header-y += xt_realm.h
 header-y += xt_recent.h
@@ -39,6 +45,8 @@ header-y += xt_statistic.h
 header-y += xt_string.h
 header-y += xt_tcpmss.h
 header-y += xt_tcpudp.h
+header-y += xt_time.h
+header-y += xt_u32.h
 
 unifdef-y += nf_conntrack_common.h
 unifdef-y += nf_conntrack_ftp.h
diff --git a/include/linux/netfilter/nfnetlink.h b/include/linux/netfilter/nfnetlink.h
index 7d8e0455cca..135e5cfe68a 100644
--- a/include/linux/netfilter/nfnetlink.h
+++ b/include/linux/netfilter/nfnetlink.h
@@ -76,6 +76,7 @@ extern int nfnetlink_subsys_unregister(const struct nfnetlink_subsystem *n);
 extern int nfnetlink_has_listeners(unsigned int group);
 extern int nfnetlink_send(struct sk_buff *skb, u32 pid, unsigned group, 
 			  int echo);
+extern void nfnetlink_set_err(u32 pid, u32 group, int error);
 extern int nfnetlink_unicast(struct sk_buff *skb, u_int32_t pid, int flags);
 
 extern void nfnl_lock(void);
diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h
index c7ee8744d26..e8e08d03675 100644
--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@@ -349,23 +349,22 @@ struct xt_table
 {
 	struct list_head list;
 
-	/* A unique name... */
-	const char name[XT_TABLE_MAXNAMELEN];
-
 	/* What hooks you will enter on */
 	unsigned int valid_hooks;
 
 	/* Lock for the curtain */
-	rwlock_t lock;
+	struct mutex lock;
 
 	/* Man behind the curtain... */
-	//struct ip6t_table_info *private;
-	void *private;
+	struct xt_table_info *private;
 
 	/* Set this to THIS_MODULE if you are a module, otherwise NULL */
 	struct module *me;
 
 	u_int8_t af;		/* address/protocol family */
+
+	/* A unique name... */
+	const char name[XT_TABLE_MAXNAMELEN];
 };
 
 #include <linux/netfilter_ipv4.h>
@@ -386,7 +385,7 @@ struct xt_table_info
 
 	/* ipt_entry tables: one per CPU */
 	/* Note : this field MUST be the last one, see XT_TABLE_INFO_SZ */
-	char *entries[1];
+	void *entries[1];
 };
 
 #define XT_TABLE_INFO_SZ (offsetof(struct xt_table_info, entries) \
@@ -433,6 +432,8 @@ extern void xt_proto_fini(struct net *net, u_int8_t af);
 
 extern struct xt_table_info *xt_alloc_table_info(unsigned int size);
 extern void xt_free_table_info(struct xt_table_info *info);
+extern void xt_table_entry_swap_rcu(struct xt_table_info *old,
+				    struct xt_table_info *new);
 
 #ifdef CONFIG_COMPAT
 #include <net/compat.h>
diff --git a/include/linux/netfilter/xt_LED.h b/include/linux/netfilter/xt_LED.h
new file mode 100644
index 00000000000..4c91a0d770d
--- /dev/null
+++ b/include/linux/netfilter/xt_LED.h
@@ -0,0 +1,13 @@
+#ifndef _XT_LED_H
+#define _XT_LED_H
+
+struct xt_led_info {
+	char id[27];        /* Unique ID for this trigger in the LED class */
+	__u8 always_blink;  /* Blink even if the LED is already on */
+	__u32 delay;        /* Delay until LED is switched off after trigger */
+
+	/* Kernel data used in the module */
+	void *internal_data __attribute__((aligned(8)));
+};
+
+#endif /* _XT_LED_H */
diff --git a/include/linux/netfilter/xt_cluster.h b/include/linux/netfilter/xt_cluster.h
new file mode 100644
index 00000000000..5e0a0d07b52
--- /dev/null
+++ b/include/linux/netfilter/xt_cluster.h
@@ -0,0 +1,15 @@
+#ifndef _XT_CLUSTER_MATCH_H
+#define _XT_CLUSTER_MATCH_H
+
+enum xt_cluster_flags {
+	XT_CLUSTER_F_INV	= (1 << 0)
+};
+
+struct xt_cluster_match_info {
+	u_int32_t		total_nodes;
+	u_int32_t		node_mask;
+	u_int32_t		hash_seed;
+	u_int32_t		flags;
+};
+
+#endif /* _XT_CLUSTER_MATCH_H */
diff --git a/include/linux/netfilter/xt_limit.h b/include/linux/netfilter/xt_limit.h
index b3ce65375ec..fda222c7953 100644
--- a/include/linux/netfilter/xt_limit.h
+++ b/include/linux/netfilter/xt_limit.h
@@ -4,6 +4,8 @@
 /* timings are in milliseconds. */
 #define XT_LIMIT_SCALE 10000
 
+struct xt_limit_priv;
+
 /* 1/10,000 sec period => max of 10,000/sec.  Min rate is then 429490
    seconds, or one every 59 hours. */
 struct xt_rateinfo {
@@ -11,11 +13,10 @@ struct xt_rateinfo {
 	u_int32_t burst;  /* Period multiplier for upper limit. */
 
 	/* Used internally by the kernel */
-	unsigned long prev;
-	u_int32_t credit;
+	unsigned long prev; /* moved to xt_limit_priv */
+	u_int32_t credit; /* moved to xt_limit_priv */
 	u_int32_t credit_cap, cost;
 
-	/* Ugly, ugly fucker. */
-	struct xt_rateinfo *master;
+	struct xt_limit_priv *master;
 };
 #endif /*_XT_RATE_H*/
diff --git a/include/linux/netfilter/xt_quota.h b/include/linux/netfilter/xt_quota.h
index 4c8368d781e..8dc89dfc136 100644
--- a/include/linux/netfilter/xt_quota.h
+++ b/include/linux/netfilter/xt_quota.h
@@ -6,13 +6,15 @@ enum xt_quota_flags {
 };
 #define XT_QUOTA_MASK		0x1
 
+struct xt_quota_priv;
+
 struct xt_quota_info {
 	u_int32_t		flags;
 	u_int32_t		pad;
 
 	/* Used internally by the kernel */
 	aligned_u64		quota;
-	struct xt_quota_info	*master;
+	struct xt_quota_priv	*master;
 };
 
 #endif /* _XT_QUOTA_H */
diff --git a/include/linux/netfilter/xt_statistic.h b/include/linux/netfilter/xt_statistic.h
index 3d38bc97504..8f521ab49ef 100644
--- a/include/linux/netfilter/xt_statistic.h
+++ b/include/linux/netfilter/xt_statistic.h
@@ -13,6 +13,8 @@ enum xt_statistic_flags {
 };
 #define XT_STATISTIC_MASK		0x1
 
+struct xt_statistic_priv;
+
 struct xt_statistic_info {
 	u_int16_t			mode;
 	u_int16_t			flags;
@@ -23,11 +25,10 @@ struct xt_statistic_info {
 		struct {
 			u_int32_t	every;
 			u_int32_t	packet;
-			/* Used internally by the kernel */
-			u_int32_t	count;
+			u_int32_t	count; /* unused */
 		} nth;
 	} u;
-	struct xt_statistic_info	*master __attribute__((aligned(8)));
+	struct xt_statistic_priv *master __attribute__((aligned(8)));
 };
 
 #endif /* _XT_STATISTIC_H */
diff --git a/include/linux/netfilter_bridge.h b/include/linux/netfilter_bridge.h
index 499aa937590..f8105e54716 100644
--- a/include/linux/netfilter_bridge.h
+++ b/include/linux/netfilter_bridge.h
@@ -59,9 +59,9 @@ static inline int nf_bridge_maybe_copy_header(struct sk_buff *skb)
 static inline unsigned int nf_bridge_encap_header_len(const struct sk_buff *skb)
 {
 	switch (skb->protocol) {
-	case __constant_htons(ETH_P_8021Q):
+	case __cpu_to_be16(ETH_P_8021Q):
 		return VLAN_HLEN;
-	case __constant_htons(ETH_P_PPP_SES):
+	case __cpu_to_be16(ETH_P_PPP_SES):
 		return PPPOE_SES_HLEN;
 	default:
 		return 0;
diff --git a/include/linux/netfilter_ipv6/Kbuild b/include/linux/netfilter_ipv6/Kbuild
index 8887a5fcd1d..aca4bd1f6d7 100644
--- a/include/linux/netfilter_ipv6/Kbuild
+++ b/include/linux/netfilter_ipv6/Kbuild
@@ -11,6 +11,7 @@ header-y += ip6t_length.h
 header-y += ip6t_limit.h
 header-y += ip6t_mac.h
 header-y += ip6t_mark.h
+header-y += ip6t_mh.h
 header-y += ip6t_multiport.h
 header-y += ip6t_opts.h
 header-y += ip6t_owner.h
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index 51b09a1f46c..5ba398e9030 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -103,6 +103,8 @@ struct nlmsgerr
 #define NETLINK_ADD_MEMBERSHIP	1
 #define NETLINK_DROP_MEMBERSHIP	2
 #define NETLINK_PKTINFO		3
+#define NETLINK_BROADCAST_ERROR	4
+#define NETLINK_NO_ENOBUFS	5
 
 struct nl_pktinfo
 {
diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h
index e38d3c9dccd..de99025f2c5 100644
--- a/include/linux/netpoll.h
+++ b/include/linux/netpoll.h
@@ -63,6 +63,13 @@ static inline int netpoll_rx(struct sk_buff *skb)
 	return ret;
 }
 
+static inline int netpoll_rx_on(struct sk_buff *skb)
+{
+	struct netpoll_info *npinfo = skb->dev->npinfo;
+
+	return npinfo && (npinfo->rx_np || npinfo->rx_flags);
+}
+
 static inline int netpoll_receive_skb(struct sk_buff *skb)
 {
 	if (!list_empty(&skb->dev->napi_list))
@@ -99,6 +106,10 @@ static inline int netpoll_rx(struct sk_buff *skb)
 {
 	return 0;
 }
+static inline int netpoll_rx_on(struct sk_buff *skb)
+{
+	return 0;
+}
 static inline int netpoll_receive_skb(struct sk_buff *skb)
 {
 	return 0;
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index e86ed59f9ad..f33aa08dd9b 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -47,7 +47,7 @@
  * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
  *	%NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
  *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, and/or
- *	%NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET.
+ *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE.
  * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
  *	or rename notification. Has attributes %NL80211_ATTR_WIPHY and
  *	%NL80211_ATTR_WIPHY_NAME.
@@ -72,8 +72,8 @@
  *
  * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
  *	by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC.
- * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT or
- *	%NL80211_ATTR_KEY_THRESHOLD.
+ * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT,
+ *	%NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD.
  * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
  *	%NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC and %NL80211_ATTR_KEY_CIPHER
  *	attributes.
@@ -84,7 +84,7 @@
  *	%NL80222_CMD_NEW_BEACON message)
  * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface
  *	using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD,
- *	%NL80211_BEACON_HEAD and %NL80211_BEACON_TAIL attributes.
+ *	%NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes.
  * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface,
  *	parameters are like for %NL80211_CMD_SET_BEACON.
  * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it
@@ -113,6 +113,8 @@
  * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
  *	%NL80211_ATTR_IFINDEX.
  *
+ * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
+ * 	regulatory domain.
  * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
  *	after being queried by the kernel. CRDA replies by sending a regulatory
  *	domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
@@ -133,6 +135,32 @@
  * @NL80211_CMD_SET_MESH_PARAMS: Set mesh networking properties for the
  *      interface identified by %NL80211_ATTR_IFINDEX
  *
+ * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The
+ *	interface is identified with %NL80211_ATTR_IFINDEX and the management
+ *	frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be
+ *	added to the end of the specified management frame is specified with
+ *	%NL80211_ATTR_IE. If the command succeeds, the requested data will be
+ *	added to all specified management frames generated by
+ *	kernel/firmware/driver.
+ *
+ * @NL80211_CMD_GET_SCAN: get scan results
+ * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
+ * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
+ *	NL80211_CMD_GET_SCAN and on the "scan" multicast group)
+ * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
+ *	partial scan results may be available
+ *
+ * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
+ * 	has been changed and provides details of the request information
+ * 	that caused the change such as who initiated the regulatory request
+ * 	(%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
+ * 	(%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
+ * 	the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
+ * 	%NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
+ * 	set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
+ * 	%NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
+ * 	to (%NL80211_ATTR_REG_ALPHA2).
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -178,6 +206,17 @@ enum nl80211_commands {
 	NL80211_CMD_GET_MESH_PARAMS,
 	NL80211_CMD_SET_MESH_PARAMS,
 
+	NL80211_CMD_SET_MGMT_EXTRA_IE,
+
+	NL80211_CMD_GET_REG,
+
+	NL80211_CMD_GET_SCAN,
+	NL80211_CMD_TRIGGER_SCAN,
+	NL80211_CMD_NEW_SCAN_RESULTS,
+	NL80211_CMD_SCAN_ABORTED,
+
+	NL80211_CMD_REG_CHANGE,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -190,6 +229,9 @@ enum nl80211_commands {
  * here
  */
 #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
+#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE
+
+#define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE
 
 /**
  * enum nl80211_attrs - nl80211 netlink attributes
@@ -284,6 +326,29 @@ enum nl80211_commands {
  *	supported interface types, each a flag attribute with the number
  *	of the interface mode.
  *
+ * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for
+ *	%NL80211_CMD_SET_MGMT_EXTRA_IE.
+ *
+ * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with
+ *	%NL80211_CMD_SET_MGMT_EXTRA_IE).
+ *
+ * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
+ *	a single scan request, a wiphy attribute.
+ *
+ * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
+ * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
+ *	scanning and include a zero-length SSID (wildcard) for wildcard scan
+ * @NL80211_ATTR_SCAN_GENERATION: the scan generation increases whenever the
+ *	scan result list changes (BSS expired or added) so that applications
+ *	can verify that they got a single, consistent snapshot (when all dump
+ *	messages carried the same generation number)
+ * @NL80211_ATTR_BSS: scan result BSS
+ *
+ * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
+ * 	currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
+ * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
+ * 	set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -346,6 +411,21 @@ enum nl80211_attrs {
 	NL80211_ATTR_WIPHY_FREQ,
 	NL80211_ATTR_WIPHY_CHANNEL_TYPE,
 
+	NL80211_ATTR_KEY_DEFAULT_MGMT,
+
+	NL80211_ATTR_MGMT_SUBTYPE,
+	NL80211_ATTR_IE,
+
+	NL80211_ATTR_MAX_NUM_SCAN_SSIDS,
+
+	NL80211_ATTR_SCAN_FREQUENCIES,
+	NL80211_ATTR_SCAN_SSIDS,
+	NL80211_ATTR_SCAN_GENERATION,
+	NL80211_ATTR_BSS,
+
+	NL80211_ATTR_REG_INITIATOR,
+	NL80211_ATTR_REG_TYPE,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -360,7 +440,11 @@ enum nl80211_attrs {
 #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
 #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
 #define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ
-#define NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET
+#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE
+#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE
+#define NL80211_ATTR_IE NL80211_ATTR_IE
+#define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR
+#define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE
 
 #define NL80211_MAX_SUPP_RATES			32
 #define NL80211_MAX_SUPP_REG_RULES		32
@@ -412,12 +496,14 @@ enum nl80211_iftype {
  * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
  *	with short barker preamble
  * @NL80211_STA_FLAG_WME: station is WME/QoS capable
+ * @NL80211_STA_FLAG_MFP: station uses management frame protection
  */
 enum nl80211_sta_flags {
 	__NL80211_STA_FLAG_INVALID,
 	NL80211_STA_FLAG_AUTHORIZED,
 	NL80211_STA_FLAG_SHORT_PREAMBLE,
 	NL80211_STA_FLAG_WME,
+	NL80211_STA_FLAG_MFP,
 
 	/* keep last */
 	__NL80211_STA_FLAG_AFTER_LAST,
@@ -465,6 +551,9 @@ enum nl80211_rate_info {
  * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
  * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
  * 	containing info as possible, see &enum nl80211_sta_info_txrate.
+ * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
+ * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
+ *	station)
  */
 enum nl80211_sta_info {
 	__NL80211_STA_INFO_INVALID,
@@ -476,6 +565,8 @@ enum nl80211_sta_info {
 	NL80211_STA_INFO_PLINK_STATE,
 	NL80211_STA_INFO_SIGNAL,
 	NL80211_STA_INFO_TX_BITRATE,
+	NL80211_STA_INFO_RX_PACKETS,
+	NL80211_STA_INFO_TX_PACKETS,
 
 	/* keep last */
 	__NL80211_STA_INFO_AFTER_LAST,
@@ -607,6 +698,48 @@ enum nl80211_bitrate_attr {
 };
 
 /**
+ * enum nl80211_initiator - Indicates the initiator of a reg domain request
+ * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
+ * 	regulatory domain.
+ * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
+ * 	regulatory domain.
+ * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
+ * 	wireless core it thinks its knows the regulatory domain we should be in.
+ * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
+ * 	802.11 country information element with regulatory information it
+ * 	thinks we should consider.
+ */
+enum nl80211_reg_initiator {
+	NL80211_REGDOM_SET_BY_CORE,
+	NL80211_REGDOM_SET_BY_USER,
+	NL80211_REGDOM_SET_BY_DRIVER,
+	NL80211_REGDOM_SET_BY_COUNTRY_IE,
+};
+
+/**
+ * enum nl80211_reg_type - specifies the type of regulatory domain
+ * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains
+ *	to a specific country. When this is set you can count on the
+ *	ISO / IEC 3166 alpha2 country code being valid.
+ * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
+ * 	domain.
+ * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
+ * 	driver specific world regulatory domain. These do not apply system-wide
+ * 	and are only applicable to the individual devices which have requested
+ * 	them to be applied.
+ * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
+ *	of an intersection between two regulatory domains -- the previously
+ *	set regulatory domain on the system and the last accepted regulatory
+ *	domain request to be processed.
+ */
+enum nl80211_reg_type {
+	NL80211_REGDOM_TYPE_COUNTRY,
+	NL80211_REGDOM_TYPE_WORLD,
+	NL80211_REGDOM_TYPE_CUSTOM_WORLD,
+	NL80211_REGDOM_TYPE_INTERSECTION,
+};
+
+/**
  * enum nl80211_reg_rule_attr - regulatory rule attributes
  * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
  * 	considerations for a given frequency range. These are the
@@ -811,4 +944,38 @@ enum nl80211_channel_type {
 	NL80211_CHAN_HT40MINUS,
 	NL80211_CHAN_HT40PLUS
 };
+
+/**
+ * enum nl80211_bss - netlink attributes for a BSS
+ *
+ * @__NL80211_BSS_INVALID: invalid
+ * @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
+ * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
+ * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
+ * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
+ * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
+ *	raw information elements from the probe response/beacon (bin)
+ * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
+ *	in mBm (100 * dBm) (s32)
+ * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
+ *	in unspecified units, scaled to 0..100 (u8)
+ * @__NL80211_BSS_AFTER_LAST: internal
+ * @NL80211_BSS_MAX: highest BSS attribute
+ */
+enum nl80211_bss {
+	__NL80211_BSS_INVALID,
+	NL80211_BSS_BSSID,
+	NL80211_BSS_FREQUENCY,
+	NL80211_BSS_TSF,
+	NL80211_BSS_BEACON_INTERVAL,
+	NL80211_BSS_CAPABILITY,
+	NL80211_BSS_INFORMATION_ELEMENTS,
+	NL80211_BSS_SIGNAL_MBM,
+	NL80211_BSS_SIGNAL_UNSPEC,
+
+	/* keep last */
+	__NL80211_BSS_AFTER_LAST,
+	NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1
+};
+
 #endif /* __LINUX_NL80211_H */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 02c18b90398..097f410edef 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -834,6 +834,8 @@
 #define PCI_DEVICE_ID_PROMISE_20276	0x5275
 #define PCI_DEVICE_ID_PROMISE_20277	0x7275
 
+#define PCI_VENDOR_ID_FOXCONN		0x105b
+
 #define PCI_VENDOR_ID_UMC		0x1060
 #define PCI_DEVICE_ID_UMC_UM8673F	0x0101
 #define PCI_DEVICE_ID_UMC_UM8886BF	0x673a
@@ -1971,6 +1973,8 @@
 
 #define PCI_VENDOR_ID_SAMSUNG		0x144d
 
+#define PCI_VENDOR_ID_AMBIT		0x1468
+
 #define PCI_VENDOR_ID_MYRICOM		0x14c1
 
 #define PCI_VENDOR_ID_TITAN		0x14D2
@@ -2217,6 +2221,8 @@
 
 #define PCI_VENDOR_ID_TOPSPIN		0x1867
 
+#define PCI_VENDOR_ID_SILAN		0x1904
+
 #define PCI_VENDOR_ID_TDI               0x192E
 #define PCI_DEVICE_ID_TDI_EHCI          0x0101
 
diff --git a/include/linux/phy.h b/include/linux/phy.h
index d7e54d98869..32cf14a4b03 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -315,8 +315,7 @@ struct phy_device {
 
 	/* Interrupt and Polling infrastructure */
 	struct work_struct phy_queue;
-	struct work_struct state_queue;
-	struct timer_list phy_timer;
+	struct delayed_work state_queue;
 	atomic_t irq_disable;
 
 	struct mutex lock;
diff --git a/include/linux/pim.h b/include/linux/pim.h
index 1ba0661561a..252bf6644c5 100644
--- a/include/linux/pim.h
+++ b/include/linux/pim.h
@@ -4,14 +4,14 @@
 #include <asm/byteorder.h>
 
 /* Message types - V1 */
-#define PIM_V1_VERSION		__constant_htonl(0x10000000)
+#define PIM_V1_VERSION		cpu_to_be32(0x10000000)
 #define PIM_V1_REGISTER		1
 
 /* Message types - V2 */
 #define PIM_VERSION		2
 #define PIM_REGISTER		1
 
-#define PIM_NULL_REGISTER	__constant_htonl(0x40000000)
+#define PIM_NULL_REGISTER	cpu_to_be32(0x40000000)
 
 /* PIMv2 register message header layout (ietf-draft-idmr-pimvsm-v2-00.ps */
 struct pimreghdr
diff --git a/include/linux/ppp_channel.h b/include/linux/ppp_channel.h
index a942892d6df..0d3fa63e90e 100644
--- a/include/linux/ppp_channel.h
+++ b/include/linux/ppp_channel.h
@@ -22,6 +22,7 @@
 #include <linux/list.h>
 #include <linux/skbuff.h>
 #include <linux/poll.h>
+#include <net/net_namespace.h>
 
 struct ppp_channel;
 
@@ -39,8 +40,8 @@ struct ppp_channel {
 	int		mtu;		/* max transmit packet size */
 	int		hdrlen;		/* amount of headroom channel needs */
 	void		*ppp;		/* opaque to channel */
-	/* the following are not used at present */
 	int		speed;		/* transfer rate (bytes/second) */
+	/* the following is not used at present */
 	int		latency;	/* overhead time in milliseconds */
 };
 
@@ -56,6 +57,9 @@ extern void ppp_input(struct ppp_channel *, struct sk_buff *);
    that we may have missed a packet. */
 extern void ppp_input_error(struct ppp_channel *, int code);
 
+/* Attach a channel to a given PPP unit in specified net. */
+extern int ppp_register_net_channel(struct net *, struct ppp_channel *);
+
 /* Attach a channel to a given PPP unit. */
 extern int ppp_register_channel(struct ppp_channel *);
 
diff --git a/include/linux/rds.h b/include/linux/rds.h
new file mode 100644
index 00000000000..d91dc91f544
--- /dev/null
+++ b/include/linux/rds.h
@@ -0,0 +1,250 @@
+/*
+ * Copyright (c) 2008 Oracle.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#ifndef _LINUX_RDS_H
+#define _LINUX_RDS_H
+
+#include <linux/types.h>
+
+/* These sparse annotated types shouldn't be in any user
+ * visible header file. We should clean this up rather
+ * than kludging around them. */
+#ifndef __KERNEL__
+#define __be16	u_int16_t
+#define __be32	u_int32_t
+#define __be64	u_int64_t
+#endif
+
+#define RDS_IB_ABI_VERSION		0x301
+
+/*
+ * setsockopt/getsockopt for SOL_RDS
+ */
+#define RDS_CANCEL_SENT_TO      	1
+#define RDS_GET_MR			2
+#define RDS_FREE_MR			3
+/* deprecated: RDS_BARRIER 4 */
+#define RDS_RECVERR			5
+#define RDS_CONG_MONITOR		6
+
+/*
+ * Control message types for SOL_RDS.
+ *
+ * CMSG_RDMA_ARGS (sendmsg)
+ *	Request a RDMA transfer to/from the specified
+ *	memory ranges.
+ *	The cmsg_data is a struct rds_rdma_args.
+ * RDS_CMSG_RDMA_DEST (recvmsg, sendmsg)
+ *	Kernel informs application about intended
+ *	source/destination of a RDMA transfer
+ * RDS_CMSG_RDMA_MAP (sendmsg)
+ *	Application asks kernel to map the given
+ *	memory range into a IB MR, and send the
+ *	R_Key along in an RDS extension header.
+ *	The cmsg_data is a struct rds_get_mr_args,
+ *	the same as for the GET_MR setsockopt.
+ * RDS_CMSG_RDMA_STATUS (recvmsg)
+ *	Returns the status of a completed RDMA operation.
+ */
+#define RDS_CMSG_RDMA_ARGS		1
+#define RDS_CMSG_RDMA_DEST		2
+#define RDS_CMSG_RDMA_MAP		3
+#define RDS_CMSG_RDMA_STATUS		4
+#define RDS_CMSG_CONG_UPDATE		5
+
+#define RDS_INFO_FIRST			10000
+#define RDS_INFO_COUNTERS		10000
+#define RDS_INFO_CONNECTIONS		10001
+/* 10002 aka RDS_INFO_FLOWS is deprecated */
+#define RDS_INFO_SEND_MESSAGES		10003
+#define RDS_INFO_RETRANS_MESSAGES       10004
+#define RDS_INFO_RECV_MESSAGES          10005
+#define RDS_INFO_SOCKETS                10006
+#define RDS_INFO_TCP_SOCKETS            10007
+#define RDS_INFO_IB_CONNECTIONS		10008
+#define RDS_INFO_CONNECTION_STATS	10009
+#define RDS_INFO_IWARP_CONNECTIONS	10010
+#define RDS_INFO_LAST			10010
+
+struct rds_info_counter {
+	u_int8_t	name[32];
+	u_int64_t	value;
+} __attribute__((packed));
+
+#define RDS_INFO_CONNECTION_FLAG_SENDING	0x01
+#define RDS_INFO_CONNECTION_FLAG_CONNECTING	0x02
+#define RDS_INFO_CONNECTION_FLAG_CONNECTED	0x04
+
+#define TRANSNAMSIZ	16
+
+struct rds_info_connection {
+	u_int64_t	next_tx_seq;
+	u_int64_t	next_rx_seq;
+	__be32		laddr;
+	__be32		faddr;
+	u_int8_t	transport[TRANSNAMSIZ];		/* null term ascii */
+	u_int8_t	flags;
+} __attribute__((packed));
+
+struct rds_info_flow {
+	__be32		laddr;
+	__be32		faddr;
+	u_int32_t	bytes;
+	__be16		lport;
+	__be16		fport;
+} __attribute__((packed));
+
+#define RDS_INFO_MESSAGE_FLAG_ACK               0x01
+#define RDS_INFO_MESSAGE_FLAG_FAST_ACK          0x02
+
+struct rds_info_message {
+	u_int64_t	seq;
+	u_int32_t	len;
+	__be32		laddr;
+	__be32		faddr;
+	__be16		lport;
+	__be16		fport;
+	u_int8_t	flags;
+} __attribute__((packed));
+
+struct rds_info_socket {
+	u_int32_t	sndbuf;
+	__be32		bound_addr;
+	__be32		connected_addr;
+	__be16		bound_port;
+	__be16		connected_port;
+	u_int32_t	rcvbuf;
+	u_int64_t	inum;
+} __attribute__((packed));
+
+#define RDS_IB_GID_LEN	16
+struct rds_info_rdma_connection {
+	__be32		src_addr;
+	__be32		dst_addr;
+	uint8_t		src_gid[RDS_IB_GID_LEN];
+	uint8_t		dst_gid[RDS_IB_GID_LEN];
+
+	uint32_t	max_send_wr;
+	uint32_t	max_recv_wr;
+	uint32_t	max_send_sge;
+	uint32_t	rdma_mr_max;
+	uint32_t	rdma_mr_size;
+};
+
+/*
+ * Congestion monitoring.
+ * Congestion control in RDS happens at the host connection
+ * level by exchanging a bitmap marking congested ports.
+ * By default, a process sleeping in poll() is always woken
+ * up when the congestion map is updated.
+ * With explicit monitoring, an application can have more
+ * fine-grained control.
+ * The application installs a 64bit mask value in the socket,
+ * where each bit corresponds to a group of ports.
+ * When a congestion update arrives, RDS checks the set of
+ * ports that are now uncongested against the list bit mask
+ * installed in the socket, and if they overlap, we queue a
+ * cong_notification on the socket.
+ *
+ * To install the congestion monitor bitmask, use RDS_CONG_MONITOR
+ * with the 64bit mask.
+ * Congestion updates are received via RDS_CMSG_CONG_UPDATE
+ * control messages.
+ *
+ * The correspondence between bits and ports is
+ *	1 << (portnum % 64)
+ */
+#define RDS_CONG_MONITOR_SIZE	64
+#define RDS_CONG_MONITOR_BIT(port)  (((unsigned int) port) % RDS_CONG_MONITOR_SIZE)
+#define RDS_CONG_MONITOR_MASK(port) (1ULL << RDS_CONG_MONITOR_BIT(port))
+
+/*
+ * RDMA related types
+ */
+
+/*
+ * This encapsulates a remote memory location.
+ * In the current implementation, it contains the R_Key
+ * of the remote memory region, and the offset into it
+ * (so that the application does not have to worry about
+ * alignment).
+ */
+typedef u_int64_t	rds_rdma_cookie_t;
+
+struct rds_iovec {
+	u_int64_t	addr;
+	u_int64_t	bytes;
+};
+
+struct rds_get_mr_args {
+	struct rds_iovec vec;
+	u_int64_t	cookie_addr;
+	uint64_t	flags;
+};
+
+struct rds_free_mr_args {
+	rds_rdma_cookie_t cookie;
+	u_int64_t	flags;
+};
+
+struct rds_rdma_args {
+	rds_rdma_cookie_t cookie;
+	struct rds_iovec remote_vec;
+	u_int64_t	local_vec_addr;
+	u_int64_t	nr_local;
+	u_int64_t	flags;
+	u_int64_t	user_token;
+};
+
+struct rds_rdma_notify {
+	u_int64_t	user_token;
+	int32_t		status;
+};
+
+#define RDS_RDMA_SUCCESS	0
+#define RDS_RDMA_REMOTE_ERROR	1
+#define RDS_RDMA_CANCELED	2
+#define RDS_RDMA_DROPPED	3
+#define RDS_RDMA_OTHER_ERROR	4
+
+/*
+ * Common set of flags for all RDMA related structs
+ */
+#define RDS_RDMA_READWRITE	0x0001
+#define RDS_RDMA_FENCE		0x0002	/* use FENCE for immediate send */
+#define RDS_RDMA_INVALIDATE	0x0004	/* invalidate R_Key after freeing MR */
+#define RDS_RDMA_USE_ONCE	0x0008	/* free MR after use */
+#define RDS_RDMA_DONTWAIT	0x0010	/* Don't wait in SET_BARRIER */
+#define RDS_RDMA_NOTIFY_ME	0x0020	/* Notify when operation completes */
+
+#endif /* IB_RDS_H */
diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h
index 1e5f6730ff3..ba3254ecf7f 100644
--- a/include/linux/rtnetlink.h
+++ b/include/linux/rtnetlink.h
@@ -217,6 +217,7 @@ enum
 #define RTPROT_DNROUTED	13	/* DECnet routing daemon */
 #define RTPROT_XORP	14	/* XORP */
 #define RTPROT_NTK	15	/* Netsukuku */
+#define RTPROT_DHCP	16      /* DHCP client */
 
 /* rtm_scope
 
@@ -622,8 +623,8 @@ static __inline__ int rtattr_strcmp(const struct rtattr *rta, const char *str)
 
 extern int rtnetlink_send(struct sk_buff *skb, struct net *net, u32 pid, u32 group, int echo);
 extern int rtnl_unicast(struct sk_buff *skb, struct net *net, u32 pid);
-extern int rtnl_notify(struct sk_buff *skb, struct net *net, u32 pid, u32 group,
-		       struct nlmsghdr *nlh, gfp_t flags);
+extern void rtnl_notify(struct sk_buff *skb, struct net *net, u32 pid,
+			u32 group, struct nlmsghdr *nlh, gfp_t flags);
 extern void rtnl_set_sk_err(struct net *net, u32 group, int error);
 extern int rtnetlink_put_metrics(struct sk_buff *skb, u32 *metrics);
 extern int rtnl_put_cacheinfo(struct sk_buff *skb, struct dst_entry *dst,
diff --git a/include/linux/sctp.h b/include/linux/sctp.h
index 8ba1c320f97..c2731bfe04d 100644
--- a/include/linux/sctp.h
+++ b/include/linux/sctp.h
@@ -60,7 +60,7 @@ typedef struct sctphdr {
 	__be16 source;
 	__be16 dest;
 	__be32 vtag;
-	__be32 checksum;
+	__le32 checksum;
 } __attribute__((packed)) sctp_sctphdr_t;
 
 #ifdef __KERNEL__
@@ -172,35 +172,35 @@ typedef struct sctp_paramhdr {
 typedef enum {
 
 	/* RFC 2960 Section 3.3.5 */
-	SCTP_PARAM_HEARTBEAT_INFO		= __constant_htons(1),
+	SCTP_PARAM_HEARTBEAT_INFO		= cpu_to_be16(1),
 	/* RFC 2960 Section 3.3.2.1 */
-	SCTP_PARAM_IPV4_ADDRESS			= __constant_htons(5),
-	SCTP_PARAM_IPV6_ADDRESS			= __constant_htons(6),
-	SCTP_PARAM_STATE_COOKIE			= __constant_htons(7),
-	SCTP_PARAM_UNRECOGNIZED_PARAMETERS	= __constant_htons(8),
-	SCTP_PARAM_COOKIE_PRESERVATIVE		= __constant_htons(9),
-	SCTP_PARAM_HOST_NAME_ADDRESS		= __constant_htons(11),
-	SCTP_PARAM_SUPPORTED_ADDRESS_TYPES	= __constant_htons(12),
-	SCTP_PARAM_ECN_CAPABLE			= __constant_htons(0x8000),
+	SCTP_PARAM_IPV4_ADDRESS			= cpu_to_be16(5),
+	SCTP_PARAM_IPV6_ADDRESS			= cpu_to_be16(6),
+	SCTP_PARAM_STATE_COOKIE			= cpu_to_be16(7),
+	SCTP_PARAM_UNRECOGNIZED_PARAMETERS	= cpu_to_be16(8),
+	SCTP_PARAM_COOKIE_PRESERVATIVE		= cpu_to_be16(9),
+	SCTP_PARAM_HOST_NAME_ADDRESS		= cpu_to_be16(11),
+	SCTP_PARAM_SUPPORTED_ADDRESS_TYPES	= cpu_to_be16(12),
+	SCTP_PARAM_ECN_CAPABLE			= cpu_to_be16(0x8000),
 
 	/* AUTH Extension Section 3 */
-	SCTP_PARAM_RANDOM			= __constant_htons(0x8002),
-	SCTP_PARAM_CHUNKS			= __constant_htons(0x8003),
-	SCTP_PARAM_HMAC_ALGO			= __constant_htons(0x8004),
+	SCTP_PARAM_RANDOM			= cpu_to_be16(0x8002),
+	SCTP_PARAM_CHUNKS			= cpu_to_be16(0x8003),
+	SCTP_PARAM_HMAC_ALGO			= cpu_to_be16(0x8004),
 
 	/* Add-IP: Supported Extensions, Section 4.2 */
-	SCTP_PARAM_SUPPORTED_EXT	= __constant_htons(0x8008),
+	SCTP_PARAM_SUPPORTED_EXT	= cpu_to_be16(0x8008),
 
 	/* PR-SCTP Sec 3.1 */
-	SCTP_PARAM_FWD_TSN_SUPPORT	= __constant_htons(0xc000),
+	SCTP_PARAM_FWD_TSN_SUPPORT	= cpu_to_be16(0xc000),
 
 	/* Add-IP Extension. Section 3.2 */
-	SCTP_PARAM_ADD_IP		= __constant_htons(0xc001),
-	SCTP_PARAM_DEL_IP		= __constant_htons(0xc002),
-	SCTP_PARAM_ERR_CAUSE		= __constant_htons(0xc003),
-	SCTP_PARAM_SET_PRIMARY		= __constant_htons(0xc004),
-	SCTP_PARAM_SUCCESS_REPORT	= __constant_htons(0xc005),
-	SCTP_PARAM_ADAPTATION_LAYER_IND = __constant_htons(0xc006),
+	SCTP_PARAM_ADD_IP		= cpu_to_be16(0xc001),
+	SCTP_PARAM_DEL_IP		= cpu_to_be16(0xc002),
+	SCTP_PARAM_ERR_CAUSE		= cpu_to_be16(0xc003),
+	SCTP_PARAM_SET_PRIMARY		= cpu_to_be16(0xc004),
+	SCTP_PARAM_SUCCESS_REPORT	= cpu_to_be16(0xc005),
+	SCTP_PARAM_ADAPTATION_LAYER_IND = cpu_to_be16(0xc006),
 
 } sctp_param_t; /* enum */
 
@@ -212,13 +212,13 @@ typedef enum {
  *
  */
 typedef enum {
-	SCTP_PARAM_ACTION_DISCARD     = __constant_htons(0x0000),
-	SCTP_PARAM_ACTION_DISCARD_ERR = __constant_htons(0x4000),
-	SCTP_PARAM_ACTION_SKIP        = __constant_htons(0x8000),
-	SCTP_PARAM_ACTION_SKIP_ERR    = __constant_htons(0xc000),
+	SCTP_PARAM_ACTION_DISCARD     = cpu_to_be16(0x0000),
+	SCTP_PARAM_ACTION_DISCARD_ERR = cpu_to_be16(0x4000),
+	SCTP_PARAM_ACTION_SKIP        = cpu_to_be16(0x8000),
+	SCTP_PARAM_ACTION_SKIP_ERR    = cpu_to_be16(0xc000),
 } sctp_param_action_t;
 
-enum { SCTP_PARAM_ACTION_MASK = __constant_htons(0xc000), };
+enum { SCTP_PARAM_ACTION_MASK = cpu_to_be16(0xc000), };
 
 /* RFC 2960 Section 3.3.1 Payload Data (DATA) (0) */
 
@@ -457,17 +457,17 @@ typedef struct sctp_operr_chunk {
  */
 typedef enum {
 
-	SCTP_ERROR_NO_ERROR	   = __constant_htons(0x00),
-	SCTP_ERROR_INV_STRM	   = __constant_htons(0x01),
-	SCTP_ERROR_MISS_PARAM 	   = __constant_htons(0x02),
-	SCTP_ERROR_STALE_COOKIE	   = __constant_htons(0x03),
-	SCTP_ERROR_NO_RESOURCE 	   = __constant_htons(0x04),
-	SCTP_ERROR_DNS_FAILED      = __constant_htons(0x05),
-	SCTP_ERROR_UNKNOWN_CHUNK   = __constant_htons(0x06),
-	SCTP_ERROR_INV_PARAM       = __constant_htons(0x07),
-	SCTP_ERROR_UNKNOWN_PARAM   = __constant_htons(0x08),
-	SCTP_ERROR_NO_DATA         = __constant_htons(0x09),
-	SCTP_ERROR_COOKIE_IN_SHUTDOWN = __constant_htons(0x0a),
+	SCTP_ERROR_NO_ERROR	   = cpu_to_be16(0x00),
+	SCTP_ERROR_INV_STRM	   = cpu_to_be16(0x01),
+	SCTP_ERROR_MISS_PARAM 	   = cpu_to_be16(0x02),
+	SCTP_ERROR_STALE_COOKIE	   = cpu_to_be16(0x03),
+	SCTP_ERROR_NO_RESOURCE 	   = cpu_to_be16(0x04),
+	SCTP_ERROR_DNS_FAILED      = cpu_to_be16(0x05),
+	SCTP_ERROR_UNKNOWN_CHUNK   = cpu_to_be16(0x06),
+	SCTP_ERROR_INV_PARAM       = cpu_to_be16(0x07),
+	SCTP_ERROR_UNKNOWN_PARAM   = cpu_to_be16(0x08),
+	SCTP_ERROR_NO_DATA         = cpu_to_be16(0x09),
+	SCTP_ERROR_COOKIE_IN_SHUTDOWN = cpu_to_be16(0x0a),
 
 
 	/* SCTP Implementation Guide:
@@ -476,9 +476,9 @@ typedef enum {
 	 *  13  Protocol Violation
 	 */
 
-	SCTP_ERROR_RESTART         = __constant_htons(0x0b),
-	SCTP_ERROR_USER_ABORT      = __constant_htons(0x0c),
-	SCTP_ERROR_PROTO_VIOLATION = __constant_htons(0x0d),
+	SCTP_ERROR_RESTART         = cpu_to_be16(0x0b),
+	SCTP_ERROR_USER_ABORT      = cpu_to_be16(0x0c),
+	SCTP_ERROR_PROTO_VIOLATION = cpu_to_be16(0x0d),
 
 	/* ADDIP Section 3.3  New Error Causes
 	 *
@@ -493,11 +493,11 @@ typedef enum {
 	 * 0x0103          Association Aborted due to illegal ASCONF-ACK
 	 * 0x0104          Request refused - no authorization.
 	 */
-	SCTP_ERROR_DEL_LAST_IP	= __constant_htons(0x0100),
-	SCTP_ERROR_RSRC_LOW	= __constant_htons(0x0101),
-	SCTP_ERROR_DEL_SRC_IP	= __constant_htons(0x0102),
-	SCTP_ERROR_ASCONF_ACK   = __constant_htons(0x0103),
-	SCTP_ERROR_REQ_REFUSED	= __constant_htons(0x0104),
+	SCTP_ERROR_DEL_LAST_IP	= cpu_to_be16(0x0100),
+	SCTP_ERROR_RSRC_LOW	= cpu_to_be16(0x0101),
+	SCTP_ERROR_DEL_SRC_IP	= cpu_to_be16(0x0102),
+	SCTP_ERROR_ASCONF_ACK   = cpu_to_be16(0x0103),
+	SCTP_ERROR_REQ_REFUSED	= cpu_to_be16(0x0104),
 
 	/* AUTH Section 4.  New Error Cause
 	 *
@@ -509,7 +509,7 @@ typedef enum {
 	 * --------------------------------------------------------------
 	 * 0x0105          Unsupported HMAC Identifier
 	 */
-	 SCTP_ERROR_UNSUP_HMAC	= __constant_htons(0x0105)
+	 SCTP_ERROR_UNSUP_HMAC	= cpu_to_be16(0x0105)
 } sctp_error_t;
 
 
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 9dcf956ad18..bb1981fd60f 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -29,9 +29,6 @@
 #include <linux/dmaengine.h>
 #include <linux/hrtimer.h>
 
-#define HAVE_ALLOC_SKB		/* For the drivers to know */
-#define HAVE_ALIGNABLE_SKB	/* Ditto 8)		   */
-
 /* Don't change this without changing skb_csum_unnecessary! */
 #define CHECKSUM_NONE 0
 #define CHECKSUM_UNNECESSARY 1
@@ -135,6 +132,55 @@ struct skb_frag_struct {
 	__u32 size;
 };
 
+#define HAVE_HW_TIME_STAMP
+
+/**
+ * struct skb_shared_hwtstamps - hardware time stamps
+ * @hwtstamp:	hardware time stamp transformed into duration
+ *		since arbitrary point in time
+ * @syststamp:	hwtstamp transformed to system time base
+ *
+ * Software time stamps generated by ktime_get_real() are stored in
+ * skb->tstamp. The relation between the different kinds of time
+ * stamps is as follows:
+ *
+ * syststamp and tstamp can be compared against each other in
+ * arbitrary combinations.  The accuracy of a
+ * syststamp/tstamp/"syststamp from other device" comparison is
+ * limited by the accuracy of the transformation into system time
+ * base. This depends on the device driver and its underlying
+ * hardware.
+ *
+ * hwtstamps can only be compared against other hwtstamps from
+ * the same device.
+ *
+ * This structure is attached to packets as part of the
+ * &skb_shared_info. Use skb_hwtstamps() to get a pointer.
+ */
+struct skb_shared_hwtstamps {
+	ktime_t	hwtstamp;
+	ktime_t	syststamp;
+};
+
+/**
+ * struct skb_shared_tx - instructions for time stamping of outgoing packets
+ * @hardware:		generate hardware time stamp
+ * @software:		generate software time stamp
+ * @in_progress:	device driver is going to provide
+ *			hardware time stamp
+ *
+ * These flags are attached to packets as part of the
+ * &skb_shared_info. Use skb_tx() to get a pointer.
+ */
+union skb_shared_tx {
+	struct {
+		__u8	hardware:1,
+			software:1,
+			in_progress:1;
+	};
+	__u8 flags;
+};
+
 /* This data is invariant across clones and lives at
  * the end of the header data, ie. at skb->end.
  */
@@ -146,10 +192,12 @@ struct skb_shared_info {
 	unsigned short	gso_segs;
 	unsigned short  gso_type;
 	__be32          ip6_frag_id;
+	union skb_shared_tx tx_flags;
 #ifdef CONFIG_HAS_DMA
 	unsigned int	num_dma_maps;
 #endif
 	struct sk_buff	*frag_list;
+	struct skb_shared_hwtstamps hwtstamps;
 	skb_frag_t	frags[MAX_SKB_FRAGS];
 #ifdef CONFIG_HAS_DMA
 	dma_addr_t	dma_maps[MAX_SKB_FRAGS + 1];
@@ -373,6 +421,7 @@ extern void skb_dma_unmap(struct device *dev, struct sk_buff *skb,
 #endif
 
 extern void kfree_skb(struct sk_buff *skb);
+extern void consume_skb(struct sk_buff *skb);
 extern void	       __kfree_skb(struct sk_buff *skb);
 extern struct sk_buff *__alloc_skb(unsigned int size,
 				   gfp_t priority, int fclone, int node);
@@ -411,7 +460,8 @@ extern int	       skb_to_sgvec(struct sk_buff *skb,
 extern int	       skb_cow_data(struct sk_buff *skb, int tailbits,
 				    struct sk_buff **trailer);
 extern int	       skb_pad(struct sk_buff *skb, int pad);
-#define dev_kfree_skb(a)	kfree_skb(a)
+#define dev_kfree_skb(a)	consume_skb(a)
+#define dev_consume_skb(a)	kfree_skb_clean(a)
 extern void	      skb_over_panic(struct sk_buff *skb, int len,
 				     void *here);
 extern void	      skb_under_panic(struct sk_buff *skb, int len,
@@ -459,6 +509,16 @@ static inline unsigned char *skb_end_pointer(const struct sk_buff *skb)
 /* Internal */
 #define skb_shinfo(SKB)	((struct skb_shared_info *)(skb_end_pointer(SKB)))
 
+static inline struct skb_shared_hwtstamps *skb_hwtstamps(struct sk_buff *skb)
+{
+	return &skb_shinfo(skb)->hwtstamps;
+}
+
+static inline union skb_shared_tx *skb_tx(struct sk_buff *skb)
+{
+	return &skb_shinfo(skb)->tx_flags;
+}
+
 /**
  *	skb_queue_empty - check if a queue is empty
  *	@list: queue head
@@ -1278,7 +1338,7 @@ static inline int skb_network_offset(const struct sk_buff *skb)
  * The networking layer reserves some headroom in skb data (via
  * dev_alloc_skb). This is used to avoid having to reallocate skb data when
  * the header has to grow. In the default case, if the header has to grow
- * 16 bytes or less we avoid the reallocation.
+ * 32 bytes or less we avoid the reallocation.
  *
  * Unfortunately this headroom changes the DMA alignment of the resulting
  * network packet. As for NET_IP_ALIGN, this unaligned DMA is expensive
@@ -1286,11 +1346,11 @@ static inline int skb_network_offset(const struct sk_buff *skb)
  * perhaps setting it to a cacheline in size (since that will maintain
  * cacheline alignment of the DMA). It must be a power of 2.
  *
- * Various parts of the networking layer expect at least 16 bytes of
+ * Various parts of the networking layer expect at least 32 bytes of
  * headroom, you should not reduce this.
  */
 #ifndef NET_SKB_PAD
-#define NET_SKB_PAD	16
+#define NET_SKB_PAD	32
 #endif
 
 extern int ___pskb_trim(struct sk_buff *skb, unsigned int len);
@@ -1678,8 +1738,6 @@ extern int	       skb_shift(struct sk_buff *tgt, struct sk_buff *skb,
 				 int shiftlen);
 
 extern struct sk_buff *skb_segment(struct sk_buff *skb, int features);
-extern int	       skb_gro_receive(struct sk_buff **head,
-				       struct sk_buff *skb);
 
 static inline void *skb_header_pointer(const struct sk_buff *skb, int offset,
 				       int len, void *buffer)
@@ -1726,6 +1784,11 @@ static inline void skb_copy_to_linear_data_offset(struct sk_buff *skb,
 
 extern void skb_init(void);
 
+static inline ktime_t skb_get_ktime(const struct sk_buff *skb)
+{
+	return skb->tstamp;
+}
+
 /**
  *	skb_get_timestamp - get timestamp from a skb
  *	@skb: skb to get stamp from
@@ -1735,11 +1798,18 @@ extern void skb_init(void);
  *	This function converts the offset back to a struct timeval and stores
  *	it in stamp.
  */
-static inline void skb_get_timestamp(const struct sk_buff *skb, struct timeval *stamp)
+static inline void skb_get_timestamp(const struct sk_buff *skb,
+				     struct timeval *stamp)
 {
 	*stamp = ktime_to_timeval(skb->tstamp);
 }
 
+static inline void skb_get_timestampns(const struct sk_buff *skb,
+				       struct timespec *stamp)
+{
+	*stamp = ktime_to_timespec(skb->tstamp);
+}
+
 static inline void __net_timestamp(struct sk_buff *skb)
 {
 	skb->tstamp = ktime_get_real();
@@ -1755,6 +1825,20 @@ static inline ktime_t net_invalid_timestamp(void)
 	return ktime_set(0, 0);
 }
 
+/**
+ * skb_tstamp_tx - queue clone of skb with send time stamps
+ * @orig_skb:	the original outgoing packet
+ * @hwtstamps:	hardware time stamps, may be NULL if not available
+ *
+ * If the skb has a socket associated, then this function clones the
+ * skb (thus sharing the actual data and optional structures), stores
+ * the optional hardware time stamping information (if non NULL) or
+ * generates a software time stamp (otherwise), then queues the clone
+ * to the error queue of the socket.  Errors are silently ignored.
+ */
+extern void skb_tstamp_tx(struct sk_buff *orig_skb,
+			struct skb_shared_hwtstamps *hwtstamps);
+
 extern __sum16 __skb_checksum_complete_head(struct sk_buff *skb, int len);
 extern __sum16 __skb_checksum_complete(struct sk_buff *skb);
 
@@ -1885,7 +1969,7 @@ static inline void skb_set_queue_mapping(struct sk_buff *skb, u16 queue_mapping)
 	skb->queue_mapping = queue_mapping;
 }
 
-static inline u16 skb_get_queue_mapping(struct sk_buff *skb)
+static inline u16 skb_get_queue_mapping(const struct sk_buff *skb)
 {
 	return skb->queue_mapping;
 }
@@ -1895,6 +1979,24 @@ static inline void skb_copy_queue_mapping(struct sk_buff *to, const struct sk_bu
 	to->queue_mapping = from->queue_mapping;
 }
 
+static inline void skb_record_rx_queue(struct sk_buff *skb, u16 rx_queue)
+{
+	skb->queue_mapping = rx_queue + 1;
+}
+
+static inline u16 skb_get_rx_queue(const struct sk_buff *skb)
+{
+	return skb->queue_mapping - 1;
+}
+
+static inline bool skb_rx_queue_recorded(const struct sk_buff *skb)
+{
+	return (skb->queue_mapping != 0);
+}
+
+extern u16 skb_tx_hash(const struct net_device *dev,
+		       const struct sk_buff *skb);
+
 #ifdef CONFIG_XFRM
 static inline struct sec_path *skb_sec_path(struct sk_buff *skb)
 {
diff --git a/include/linux/smsc911x.h b/include/linux/smsc911x.h
index 1cbf0313add..b32725075d7 100644
--- a/include/linux/smsc911x.h
+++ b/include/linux/smsc911x.h
@@ -43,5 +43,8 @@ struct smsc911x_platform_config {
 /* Constants for flags */
 #define SMSC911X_USE_16BIT 			(BIT(0))
 #define SMSC911X_USE_32BIT 			(BIT(1))
+#define SMSC911X_FORCE_INTERNAL_PHY		(BIT(2))
+#define SMSC911X_FORCE_EXTERNAL_PHY 		(BIT(3))
+#define SMSC911X_SAVE_MAC_ADDRESS		(BIT(4))
 
 #endif /* __LINUX_SMSC911X_H__ */
diff --git a/include/linux/socket.h b/include/linux/socket.h
index 20fc4bbfca4..9c90dc403ef 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -179,6 +179,7 @@ struct ucred {
 #define AF_ASH		18	/* Ash				*/
 #define AF_ECONET	19	/* Acorn Econet			*/
 #define AF_ATMSVC	20	/* ATM SVCs			*/
+#define AF_RDS		21	/* RDS sockets 			*/
 #define AF_SNA		22	/* Linux SNA Project (nutters!) */
 #define AF_IRDA		23	/* IRDA sockets			*/
 #define AF_PPPOX	24	/* PPPoX sockets		*/
@@ -217,6 +218,7 @@ struct ucred {
 #define PF_ASH		AF_ASH
 #define PF_ECONET	AF_ECONET
 #define PF_ATMSVC	AF_ATMSVC
+#define PF_RDS		AF_RDS
 #define PF_SNA		AF_SNA
 #define PF_IRDA		AF_IRDA
 #define PF_PPPOX	AF_PPPOX
@@ -298,6 +300,7 @@ struct ucred {
 #define SOL_PPPOL2TP	273
 #define SOL_BLUETOOTH	274
 #define SOL_PNPIPE	275
+#define SOL_RDS		276
 
 /* IPX options */
 #define IPX_TYPE	1
diff --git a/include/linux/sockios.h b/include/linux/sockios.h
index abef7596655..241f179347d 100644
--- a/include/linux/sockios.h
+++ b/include/linux/sockios.h
@@ -122,6 +122,9 @@
 #define SIOCBRADDIF	0x89a2		/* add interface to bridge      */
 #define SIOCBRDELIF	0x89a3		/* remove interface from bridge */
 
+/* hardware time stamping: parameters in linux/net_tstamp.h */
+#define SIOCSHWTSTAMP   0x89b0
+
 /* Device private ioctl calls */
 
 /*
diff --git a/include/linux/spi/libertas_spi.h b/include/linux/spi/libertas_spi.h
new file mode 100644
index 00000000000..79506f5f9e6
--- /dev/null
+++ b/include/linux/spi/libertas_spi.h
@@ -0,0 +1,32 @@
+/*
+ * board-specific data for the libertas_spi driver.
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#ifndef _LIBERTAS_SPI_H_
+#define _LIBERTAS_SPI_H_
+
+struct spi_device;
+
+struct libertas_spi_platform_data {
+	/* There are two ways to read data from the WLAN module's SPI
+	 * interface. Setting 0 or 1 here controls which one is used.
+	 *
+	 * Usually you want to set use_dummy_writes = 1.
+	 * However, if that doesn't work or if you are using a slow SPI clock
+	 * speed, you may want to use 0 here. */
+	u16 use_dummy_writes;
+
+	/* GPIO number to use as chip select */
+	u16 gpio_cs;
+
+	/* Board specific setup/teardown */
+	int (*setup)(struct spi_device *spi);
+	int (*teardown)(struct spi_device *spi);
+};
+#endif
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 17d9b58f637..5ae8fa22d33 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -339,6 +339,10 @@ extern int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
 
 extern void ssb_bus_unregister(struct ssb_bus *bus);
 
+/* Set a fallback SPROM.
+ * See kdoc at the function definition for complete documentation. */
+extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
+
 /* Suspend a SSB bus.
  * Call this from the parent bus suspend routine. */
 extern int ssb_bus_suspend(struct ssb_bus *bus);
diff --git a/include/linux/ssb/ssb_driver_chipcommon.h b/include/linux/ssb/ssb_driver_chipcommon.h
index 7d7e03dcf77..d3b1d18922f 100644
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -181,6 +181,16 @@
 #define SSB_CHIPCO_PROG_WAITCNT		0x0124
 #define SSB_CHIPCO_FLASH_CFG		0x0128
 #define SSB_CHIPCO_FLASH_WAITCNT	0x012C
+#define SSB_CHIPCO_CLKCTLST		0x01E0 /* Clock control and status (rev >= 20) */
+#define  SSB_CHIPCO_CLKCTLST_FORCEALP	0x00000001 /* Force ALP request */
+#define  SSB_CHIPCO_CLKCTLST_FORCEHT	0x00000002 /* Force HT request */
+#define  SSB_CHIPCO_CLKCTLST_FORCEILP	0x00000004 /* Force ILP request */
+#define  SSB_CHIPCO_CLKCTLST_HAVEALPREQ	0x00000008 /* ALP available request */
+#define  SSB_CHIPCO_CLKCTLST_HAVEHTREQ	0x00000010 /* HT available request */
+#define  SSB_CHIPCO_CLKCTLST_HWCROFF	0x00000020 /* Force HW clock request off */
+#define  SSB_CHIPCO_CLKCTLST_HAVEHT	0x00010000 /* HT available */
+#define  SSB_CHIPCO_CLKCTLST_HAVEALP	0x00020000 /* APL available */
+#define SSB_CHIPCO_HW_WORKAROUND	0x01E4 /* Hardware workaround (rev >= 20) */
 #define SSB_CHIPCO_UART0_DATA		0x0300
 #define SSB_CHIPCO_UART0_IMR		0x0304
 #define SSB_CHIPCO_UART0_FCR		0x0308
@@ -197,6 +207,196 @@
 #define SSB_CHIPCO_UART1_LSR		0x0414
 #define SSB_CHIPCO_UART1_MSR		0x0418
 #define SSB_CHIPCO_UART1_SCRATCH	0x041C
+/* PMU registers (rev >= 20) */
+#define SSB_CHIPCO_PMU_CTL			0x0600 /* PMU control */
+#define  SSB_CHIPCO_PMU_CTL_ILP_DIV		0xFFFF0000 /* ILP div mask */
+#define  SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT	16
+#define  SSB_CHIPCO_PMU_CTL_NOILPONW		0x00000200 /* No ILP on wait */
+#define  SSB_CHIPCO_PMU_CTL_HTREQEN		0x00000100 /* HT req enable */
+#define  SSB_CHIPCO_PMU_CTL_ALPREQEN		0x00000080 /* ALP req enable */
+#define  SSB_CHIPCO_PMU_CTL_XTALFREQ		0x0000007C /* Crystal freq */
+#define  SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT	2
+#define  SSB_CHIPCO_PMU_CTL_ILPDIVEN		0x00000002 /* ILP div enable */
+#define  SSB_CHIPCO_PMU_CTL_LPOSEL		0x00000001 /* LPO sel */
+#define SSB_CHIPCO_PMU_CAP			0x0604 /* PMU capabilities */
+#define  SSB_CHIPCO_PMU_CAP_REVISION		0x000000FF /* Revision mask */
+#define SSB_CHIPCO_PMU_STAT			0x0608 /* PMU status */
+#define  SSB_CHIPCO_PMU_STAT_INTPEND		0x00000040 /* Interrupt pending */
+#define  SSB_CHIPCO_PMU_STAT_SBCLKST		0x00000030 /* Backplane clock status? */
+#define  SSB_CHIPCO_PMU_STAT_HAVEALP		0x00000008 /* ALP available */
+#define  SSB_CHIPCO_PMU_STAT_HAVEHT		0x00000004 /* HT available */
+#define  SSB_CHIPCO_PMU_STAT_RESINIT		0x00000003 /* Res init */
+#define SSB_CHIPCO_PMU_RES_STAT			0x060C /* PMU res status */
+#define SSB_CHIPCO_PMU_RES_PEND			0x0610 /* PMU res pending */
+#define SSB_CHIPCO_PMU_TIMER			0x0614 /* PMU timer */
+#define SSB_CHIPCO_PMU_MINRES_MSK		0x0618 /* PMU min res mask */
+#define SSB_CHIPCO_PMU_MAXRES_MSK		0x061C /* PMU max res mask */
+#define SSB_CHIPCO_PMU_RES_TABSEL		0x0620 /* PMU res table sel */
+#define SSB_CHIPCO_PMU_RES_DEPMSK		0x0624 /* PMU res dep mask */
+#define SSB_CHIPCO_PMU_RES_UPDNTM		0x0628 /* PMU res updown timer */
+#define SSB_CHIPCO_PMU_RES_TIMER		0x062C /* PMU res timer */
+#define SSB_CHIPCO_PMU_CLKSTRETCH		0x0630 /* PMU clockstretch */
+#define SSB_CHIPCO_PMU_WATCHDOG			0x0634 /* PMU watchdog */
+#define SSB_CHIPCO_PMU_RES_REQTS		0x0640 /* PMU res req timer sel */
+#define SSB_CHIPCO_PMU_RES_REQT			0x0644 /* PMU res req timer */
+#define SSB_CHIPCO_PMU_RES_REQM			0x0648 /* PMU res req mask */
+#define SSB_CHIPCO_CHIPCTL_ADDR			0x0650
+#define SSB_CHIPCO_CHIPCTL_DATA			0x0654
+#define SSB_CHIPCO_REGCTL_ADDR			0x0658
+#define SSB_CHIPCO_REGCTL_DATA			0x065C
+#define SSB_CHIPCO_PLLCTL_ADDR			0x0660
+#define SSB_CHIPCO_PLLCTL_DATA			0x0664
+
+
+
+/** PMU PLL registers */
+
+/* PMU rev 0 PLL registers */
+#define SSB_PMU0_PLLCTL0			0
+#define  SSB_PMU0_PLLCTL0_PDIV_MSK		0x00000001
+#define  SSB_PMU0_PLLCTL0_PDIV_FREQ		25000 /* kHz */
+#define SSB_PMU0_PLLCTL1			1
+#define  SSB_PMU0_PLLCTL1_WILD_IMSK		0xF0000000 /* Wild int mask (low nibble) */
+#define  SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT	28
+#define  SSB_PMU0_PLLCTL1_WILD_FMSK		0x0FFFFF00 /* Wild frac mask */
+#define  SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT	8
+#define  SSB_PMU0_PLLCTL1_STOPMOD		0x00000040 /* Stop mod */
+#define SSB_PMU0_PLLCTL2			2
+#define  SSB_PMU0_PLLCTL2_WILD_IMSKHI		0x0000000F /* Wild int mask (high nibble) */
+#define  SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT	0
+
+/* PMU rev 1 PLL registers */
+#define SSB_PMU1_PLLCTL0			0
+#define  SSB_PMU1_PLLCTL0_P1DIV			0x00F00000 /* P1 div */
+#define  SSB_PMU1_PLLCTL0_P1DIV_SHIFT		20
+#define  SSB_PMU1_PLLCTL0_P2DIV			0x0F000000 /* P2 div */
+#define  SSB_PMU1_PLLCTL0_P2DIV_SHIFT		24
+#define SSB_PMU1_PLLCTL1			1
+#define  SSB_PMU1_PLLCTL1_M1DIV			0x000000FF /* M1 div */
+#define  SSB_PMU1_PLLCTL1_M1DIV_SHIFT		0
+#define  SSB_PMU1_PLLCTL1_M2DIV			0x0000FF00 /* M2 div */
+#define  SSB_PMU1_PLLCTL1_M2DIV_SHIFT		8
+#define  SSB_PMU1_PLLCTL1_M3DIV			0x00FF0000 /* M3 div */
+#define  SSB_PMU1_PLLCTL1_M3DIV_SHIFT		16
+#define  SSB_PMU1_PLLCTL1_M4DIV			0xFF000000 /* M4 div */
+#define  SSB_PMU1_PLLCTL1_M4DIV_SHIFT		24
+#define SSB_PMU1_PLLCTL2			2
+#define  SSB_PMU1_PLLCTL2_M5DIV			0x000000FF /* M5 div */
+#define  SSB_PMU1_PLLCTL2_M5DIV_SHIFT		0
+#define  SSB_PMU1_PLLCTL2_M6DIV			0x0000FF00 /* M6 div */
+#define  SSB_PMU1_PLLCTL2_M6DIV_SHIFT		8
+#define  SSB_PMU1_PLLCTL2_NDIVMODE		0x000E0000 /* NDIV mode */
+#define  SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT	17
+#define  SSB_PMU1_PLLCTL2_NDIVINT		0x1FF00000 /* NDIV int */
+#define  SSB_PMU1_PLLCTL2_NDIVINT_SHIFT		20
+#define SSB_PMU1_PLLCTL3			3
+#define  SSB_PMU1_PLLCTL3_NDIVFRAC		0x00FFFFFF /* NDIV frac */
+#define  SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT	0
+#define SSB_PMU1_PLLCTL4			4
+#define SSB_PMU1_PLLCTL5			5
+#define  SSB_PMU1_PLLCTL5_CLKDRV		0xFFFFFF00 /* clk drv */
+#define  SSB_PMU1_PLLCTL5_CLKDRV_SHIFT		8
+
+/* BCM4312 PLL resource numbers. */
+#define SSB_PMURES_4312_SWITCHER_BURST		0
+#define SSB_PMURES_4312_SWITCHER_PWM    	1
+#define SSB_PMURES_4312_PA_REF_LDO		2
+#define SSB_PMURES_4312_CORE_LDO_BURST		3
+#define SSB_PMURES_4312_CORE_LDO_PWM		4
+#define SSB_PMURES_4312_RADIO_LDO		5
+#define SSB_PMURES_4312_ILP_REQUEST		6
+#define SSB_PMURES_4312_BG_FILTBYP		7
+#define SSB_PMURES_4312_TX_FILTBYP		8
+#define SSB_PMURES_4312_RX_FILTBYP		9
+#define SSB_PMURES_4312_XTAL_PU			10
+#define SSB_PMURES_4312_ALP_AVAIL		11
+#define SSB_PMURES_4312_BB_PLL_FILTBYP		12
+#define SSB_PMURES_4312_RF_PLL_FILTBYP		13
+#define SSB_PMURES_4312_HT_AVAIL		14
+
+/* BCM4325 PLL resource numbers. */
+#define SSB_PMURES_4325_BUCK_BOOST_BURST	0
+#define SSB_PMURES_4325_CBUCK_BURST		1
+#define SSB_PMURES_4325_CBUCK_PWM		2
+#define SSB_PMURES_4325_CLDO_CBUCK_BURST	3
+#define SSB_PMURES_4325_CLDO_CBUCK_PWM		4
+#define SSB_PMURES_4325_BUCK_BOOST_PWM		5
+#define SSB_PMURES_4325_ILP_REQUEST		6
+#define SSB_PMURES_4325_ABUCK_BURST		7
+#define SSB_PMURES_4325_ABUCK_PWM		8
+#define SSB_PMURES_4325_LNLDO1_PU		9
+#define SSB_PMURES_4325_LNLDO2_PU		10
+#define SSB_PMURES_4325_LNLDO3_PU		11
+#define SSB_PMURES_4325_LNLDO4_PU		12
+#define SSB_PMURES_4325_XTAL_PU			13
+#define SSB_PMURES_4325_ALP_AVAIL		14
+#define SSB_PMURES_4325_RX_PWRSW_PU		15
+#define SSB_PMURES_4325_TX_PWRSW_PU		16
+#define SSB_PMURES_4325_RFPLL_PWRSW_PU		17
+#define SSB_PMURES_4325_LOGEN_PWRSW_PU		18
+#define SSB_PMURES_4325_AFE_PWRSW_PU		19
+#define SSB_PMURES_4325_BBPLL_PWRSW_PU		20
+#define SSB_PMURES_4325_HT_AVAIL		21
+
+/* BCM4328 PLL resource numbers. */
+#define SSB_PMURES_4328_EXT_SWITCHER_PWM	0
+#define SSB_PMURES_4328_BB_SWITCHER_PWM		1
+#define SSB_PMURES_4328_BB_SWITCHER_BURST	2
+#define SSB_PMURES_4328_BB_EXT_SWITCHER_BURST	3
+#define SSB_PMURES_4328_ILP_REQUEST		4
+#define SSB_PMURES_4328_RADIO_SWITCHER_PWM	5
+#define SSB_PMURES_4328_RADIO_SWITCHER_BURST	6
+#define SSB_PMURES_4328_ROM_SWITCH		7
+#define SSB_PMURES_4328_PA_REF_LDO		8
+#define SSB_PMURES_4328_RADIO_LDO		9
+#define SSB_PMURES_4328_AFE_LDO			10
+#define SSB_PMURES_4328_PLL_LDO			11
+#define SSB_PMURES_4328_BG_FILTBYP		12
+#define SSB_PMURES_4328_TX_FILTBYP		13
+#define SSB_PMURES_4328_RX_FILTBYP		14
+#define SSB_PMURES_4328_XTAL_PU			15
+#define SSB_PMURES_4328_XTAL_EN			16
+#define SSB_PMURES_4328_BB_PLL_FILTBYP		17
+#define SSB_PMURES_4328_RF_PLL_FILTBYP		18
+#define SSB_PMURES_4328_BB_PLL_PU		19
+
+/* BCM5354 PLL resource numbers. */
+#define SSB_PMURES_5354_EXT_SWITCHER_PWM	0
+#define SSB_PMURES_5354_BB_SWITCHER_PWM		1
+#define SSB_PMURES_5354_BB_SWITCHER_BURST	2
+#define SSB_PMURES_5354_BB_EXT_SWITCHER_BURST	3
+#define SSB_PMURES_5354_ILP_REQUEST		4
+#define SSB_PMURES_5354_RADIO_SWITCHER_PWM	5
+#define SSB_PMURES_5354_RADIO_SWITCHER_BURST	6
+#define SSB_PMURES_5354_ROM_SWITCH		7
+#define SSB_PMURES_5354_PA_REF_LDO		8
+#define SSB_PMURES_5354_RADIO_LDO		9
+#define SSB_PMURES_5354_AFE_LDO			10
+#define SSB_PMURES_5354_PLL_LDO			11
+#define SSB_PMURES_5354_BG_FILTBYP		12
+#define SSB_PMURES_5354_TX_FILTBYP		13
+#define SSB_PMURES_5354_RX_FILTBYP		14
+#define SSB_PMURES_5354_XTAL_PU			15
+#define SSB_PMURES_5354_XTAL_EN			16
+#define SSB_PMURES_5354_BB_PLL_FILTBYP		17
+#define SSB_PMURES_5354_RF_PLL_FILTBYP		18
+#define SSB_PMURES_5354_BB_PLL_PU		19
+
+
+
+/** Chip specific Chip-Status register contents. */
+#define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL	0x00000003
+#define SSB_CHIPCO_CHST_4325_DEFCIS_SEL		0 /* OTP is powered up, use def. CIS, no SPROM */
+#define SSB_CHIPCO_CHST_4325_SPROM_SEL		1 /* OTP is powered up, SPROM is present */
+#define SSB_CHIPCO_CHST_4325_OTP_SEL		2 /* OTP is powered up, no SPROM */
+#define SSB_CHIPCO_CHST_4325_OTP_PWRDN		3 /* OTP is powered down, SPROM is present */
+#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE	0x00000004
+#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE_SHIFT  2
+#define SSB_CHIPCO_CHST_4325_RCAL_VALID		0x00000008
+#define SSB_CHIPCO_CHST_4325_RCAL_VALID_SHIFT	3
+#define SSB_CHIPCO_CHST_4325_RCAL_VALUE		0x000001F0
+#define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT	4
+#define SSB_CHIPCO_CHST_4325_PMUTOP_2B 		0x00000200 /* 1 for 2b, 0 for to 2a */
 
 
 
@@ -353,11 +553,20 @@
 struct ssb_device;
 struct ssb_serial_port;
 
+/* Data for the PMU, if available.
+ * Check availability with ((struct ssb_chipcommon)->capabilities & SSB_CHIPCO_CAP_PMU)
+ */
+struct ssb_chipcommon_pmu {
+	u8 rev;			/* PMU revision */
+	u32 crystalfreq;	/* The active crystal frequency (in kHz) */
+};
+
 struct ssb_chipcommon {
 	struct ssb_device *dev;
 	u32 capabilities;
 	/* Fast Powerup Delay constant */
 	u16 fast_pwrup_delay;
+	struct ssb_chipcommon_pmu pmu;
 };
 
 static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
@@ -365,6 +574,17 @@ static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
 	return (cc->dev != NULL);
 }
 
+/* Register access */
+#define chipco_read32(cc, offset)	ssb_read32((cc)->dev, offset)
+#define chipco_write32(cc, offset, val)	ssb_write32((cc)->dev, offset, val)
+
+#define chipco_mask32(cc, offset, mask) \
+		chipco_write32(cc, offset, chipco_read32(cc, offset) & (mask))
+#define chipco_set32(cc, offset, set) \
+		chipco_write32(cc, offset, chipco_read32(cc, offset) | (set))
+#define chipco_maskset32(cc, offset, mask, set) \
+		chipco_write32(cc, offset, (chipco_read32(cc, offset) & (mask)) | (set))
+
 extern void ssb_chipcommon_init(struct ssb_chipcommon *cc);
 
 extern void ssb_chipco_suspend(struct ssb_chipcommon *cc);
@@ -406,4 +626,8 @@ extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
 				  struct ssb_serial_port *ports);
 #endif /* CONFIG_SSB_SERIAL */
 
+/* PMU support */
+extern void ssb_pmu_init(struct ssb_chipcommon *cc);
+
+
 #endif /* LINUX_SSB_CHIPCO_H_ */
diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h
index 99a0f991e85..a01b982b578 100644
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -326,6 +326,42 @@
 #define  SSB_SPROM5_GPIOB_P3		0xFF00	/* Pin 3 */
 #define  SSB_SPROM5_GPIOB_P3_SHIFT	8
 
+/* SPROM Revision 8 */
+#define SSB_SPROM8_BFLLO		0x1084	/* Boardflags (low 16 bits) */
+#define SSB_SPROM8_BFLHI		0x1086	/* Boardflags Hi */
+#define SSB_SPROM8_IL0MAC		0x108C	/* 6 byte MAC address */
+#define SSB_SPROM8_CCODE		0x1092	/* 2 byte country code */
+#define SSB_SPROM8_ANTAVAIL		0x109C  /* Antenna available bitfields*/
+#define SSB_SPROM8_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
+#define SSB_SPROM8_ANTAVAIL_A_SHIFT	8
+#define SSB_SPROM8_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
+#define SSB_SPROM8_ANTAVAIL_BG_SHIFT	0
+#define SSB_SPROM8_AGAIN01		0x109E	/* Antenna Gain (in dBm Q5.2) */
+#define  SSB_SPROM8_AGAIN0		0x00FF	/* Antenna 0 */
+#define  SSB_SPROM8_AGAIN0_SHIFT	0
+#define  SSB_SPROM8_AGAIN1		0xFF00	/* Antenna 1 */
+#define  SSB_SPROM8_AGAIN1_SHIFT	8
+#define SSB_SPROM8_AGAIN23		0x10A0
+#define  SSB_SPROM8_AGAIN2		0x00FF	/* Antenna 2 */
+#define  SSB_SPROM8_AGAIN2_SHIFT	0
+#define  SSB_SPROM8_AGAIN3		0xFF00	/* Antenna 3 */
+#define  SSB_SPROM8_AGAIN3_SHIFT	8
+#define SSB_SPROM8_GPIOA		0x1096	/*Gen. Purpose IO # 0 and 1 */
+#define  SSB_SPROM8_GPIOA_P0		0x00FF	/* Pin 0 */
+#define  SSB_SPROM8_GPIOA_P1		0xFF00	/* Pin 1 */
+#define  SSB_SPROM8_GPIOA_P1_SHIFT	8
+#define SSB_SPROM8_GPIOB		0x1098	/* Gen. Purpose IO # 2 and 3 */
+#define  SSB_SPROM8_GPIOB_P2		0x00FF	/* Pin 2 */
+#define  SSB_SPROM8_GPIOB_P3		0xFF00	/* Pin 3 */
+#define  SSB_SPROM8_GPIOB_P3_SHIFT	8
+#define SSB_SPROM8_MAXP_BG		0x10C0  /* Max Power BG in path 1 */
+#define  SSB_SPROM8_MAXP_BG_MASK	0x00FF  /* Mask for Max Power BG */
+#define  SSB_SPROM8_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
+#define  SSB_SPROM8_ITSSI_BG_SHIFT	8
+#define SSB_SPROM8_MAXP_A		0x10C8  /* Max Power A in path 1 */
+#define  SSB_SPROM8_MAXP_A_MASK		0x00FF  /* Mask for Max Power A */
+#define  SSB_SPROM8_ITSSI_A		0xFF00	/* Mask for path 1 itssi_a */
+#define  SSB_SPROM8_ITSSI_A_SHIFT	8
 
 /* Values for SSB_SPROM1_BINF_CCODE */
 enum {
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 39d471d1163..e76d3b22a46 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -490,6 +490,7 @@ enum
 	NET_IPV4_CONF_ARP_IGNORE=19,
 	NET_IPV4_CONF_PROMOTE_SECONDARIES=20,
 	NET_IPV4_CONF_ARP_ACCEPT=21,
+	NET_IPV4_CONF_ARP_NOTIFY=22,
 	__NET_IPV4_CONF_MAX
 };
 
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index fe77e1499ab..9d5078bd23a 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -69,16 +69,16 @@ union tcp_word_hdr {
 #define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) 
 
 enum { 
-	TCP_FLAG_CWR = __constant_htonl(0x00800000), 
-	TCP_FLAG_ECE = __constant_htonl(0x00400000), 
-	TCP_FLAG_URG = __constant_htonl(0x00200000), 
-	TCP_FLAG_ACK = __constant_htonl(0x00100000), 
-	TCP_FLAG_PSH = __constant_htonl(0x00080000), 
-	TCP_FLAG_RST = __constant_htonl(0x00040000), 
-	TCP_FLAG_SYN = __constant_htonl(0x00020000), 
-	TCP_FLAG_FIN = __constant_htonl(0x00010000),
-	TCP_RESERVED_BITS = __constant_htonl(0x0F000000),
-	TCP_DATA_OFFSET = __constant_htonl(0xF0000000)
+	TCP_FLAG_CWR = __cpu_to_be32(0x00800000),
+	TCP_FLAG_ECE = __cpu_to_be32(0x00400000),
+	TCP_FLAG_URG = __cpu_to_be32(0x00200000),
+	TCP_FLAG_ACK = __cpu_to_be32(0x00100000),
+	TCP_FLAG_PSH = __cpu_to_be32(0x00080000),
+	TCP_FLAG_RST = __cpu_to_be32(0x00040000),
+	TCP_FLAG_SYN = __cpu_to_be32(0x00020000),
+	TCP_FLAG_FIN = __cpu_to_be32(0x00010000),
+	TCP_RESERVED_BITS = __cpu_to_be32(0x0F000000),
+	TCP_DATA_OFFSET = __cpu_to_be32(0xF0000000)
 }; 
 
 /* TCP socket options */
@@ -218,7 +218,6 @@ struct tcp_options_received {
 		snd_wscale : 4,	/* Window scaling received from sender	*/
 		rcv_wscale : 4;	/* Window scaling to send to receiver	*/
 /*	SACKs data	*/
-	u8	eff_sacks;	/* Size of SACK array to send with next packet */
 	u8	num_sacks;	/* Number of SACK blocks		*/
 	u16	user_mss;  	/* mss requested by user in ioctl */
 	u16	mss_clamp;	/* Maximal mss, negotiated at connection setup */
@@ -249,7 +248,7 @@ struct tcp_sock {
 	/* inet_connection_sock has to be the first member of tcp_sock */
 	struct inet_connection_sock	inet_conn;
 	u16	tcp_header_len;	/* Bytes of tcp header to send		*/
-	u16	xmit_size_goal;	/* Goal for segmenting output packets	*/
+	u16	xmit_size_goal_segs; /* Goal for segmenting output packets */
 
 /*
  *	Header prediction flags
diff --git a/include/linux/timecompare.h b/include/linux/timecompare.h
new file mode 100644
index 00000000000..546e2234e4b
--- /dev/null
+++ b/include/linux/timecompare.h
@@ -0,0 +1,125 @@
+/*
+ * Utility code which helps transforming between two different time
+ * bases, called "source" and "target" time in this code.
+ *
+ * Source time has to be provided via the timecounter API while target
+ * time is accessed via a function callback whose prototype
+ * intentionally matches ktime_get() and ktime_get_real(). These
+ * interfaces where chosen like this so that the code serves its
+ * initial purpose without additional glue code.
+ *
+ * This purpose is synchronizing a hardware clock in a NIC with system
+ * time, in order to implement the Precision Time Protocol (PTP,
+ * IEEE1588) with more accurate hardware assisted time stamping.  In
+ * that context only synchronization against system time (=
+ * ktime_get_real()) is currently needed. But this utility code might
+ * become useful in other situations, which is why it was written as
+ * general purpose utility code.
+ *
+ * The source timecounter is assumed to return monotonically
+ * increasing time (but this code does its best to compensate if that
+ * is not the case) whereas target time may jump.
+ *
+ * The target time corresponding to a source time is determined by
+ * reading target time, reading source time, reading target time
+ * again, then assuming that average target time corresponds to source
+ * time. In other words, the assumption is that reading the source
+ * time is slow and involves equal time for sending the request and
+ * receiving the reply, whereas reading target time is assumed to be
+ * fast.
+ *
+ * Copyright (C) 2009 Intel Corporation.
+ * Author: Patrick Ohly <patrick.ohly@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef _LINUX_TIMECOMPARE_H
+#define _LINUX_TIMECOMPARE_H
+
+#include <linux/clocksource.h>
+#include <linux/ktime.h>
+
+/**
+ * struct timecompare - stores state and configuration for the two clocks
+ *
+ * Initialize to zero, then set source/target/num_samples.
+ *
+ * Transformation between source time and target time is done with:
+ * target_time = source_time + offset +
+ *               (source_time - last_update) * skew /
+ *               TIMECOMPARE_SKEW_RESOLUTION
+ *
+ * @source:          used to get source time stamps via timecounter_read()
+ * @target:          function returning target time (for example, ktime_get
+ *                   for monotonic time, or ktime_get_real for wall clock)
+ * @num_samples:     number of times that source time and target time are to
+ *                   be compared when determining their offset
+ * @offset:          (target time - source time) at the time of the last update
+ * @skew:            average (target time - source time) / delta source time *
+ *                   TIMECOMPARE_SKEW_RESOLUTION
+ * @last_update:     last source time stamp when time offset was measured
+ */
+struct timecompare {
+	struct timecounter *source;
+	ktime_t (*target)(void);
+	int num_samples;
+
+	s64 offset;
+	s64 skew;
+	u64 last_update;
+};
+
+/**
+ * timecompare_transform - transform source time stamp into target time base
+ * @sync:            context for time sync
+ * @source_tstamp:   the result of timecounter_read() or
+ *                   timecounter_cyc2time()
+ */
+extern ktime_t timecompare_transform(struct timecompare *sync,
+				     u64 source_tstamp);
+
+/**
+ * timecompare_offset - measure current (target time - source time) offset
+ * @sync:            context for time sync
+ * @offset:          average offset during sample period returned here
+ * @source_tstamp:   average source time during sample period returned here
+ *
+ * Returns number of samples used. Might be zero (= no result) in the
+ * unlikely case that target time was monotonically decreasing for all
+ * samples (= broken).
+ */
+extern int timecompare_offset(struct timecompare *sync,
+			      s64 *offset,
+			      u64 *source_tstamp);
+
+extern void __timecompare_update(struct timecompare *sync,
+				 u64 source_tstamp);
+
+/**
+ * timecompare_update - update offset and skew by measuring current offset
+ * @sync:            context for time sync
+ * @source_tstamp:   the result of timecounter_read() or
+ *                   timecounter_cyc2time(), pass zero to force update
+ *
+ * Updates are only done at most once per second.
+ */
+static inline void timecompare_update(struct timecompare *sync,
+				      u64 source_tstamp)
+{
+	if (!source_tstamp ||
+	    (s64)(source_tstamp - sync->last_update) >= NSEC_PER_SEC)
+		__timecompare_update(sync, source_tstamp);
+}
+
+#endif /* _LINUX_TIMECOMPARE_H */
diff --git a/include/linux/usb/rndis_host.h b/include/linux/usb/rndis_host.h
index 0a6e6d4b929..37836b937d9 100644
--- a/include/linux/usb/rndis_host.h
+++ b/include/linux/usb/rndis_host.h
@@ -49,48 +49,45 @@ struct rndis_msg_hdr {
  */
 #define	RNDIS_CONTROL_TIMEOUT_MS	(5 * 1000)
 
-
-#define ccpu2 __constant_cpu_to_le32
-
-#define RNDIS_MSG_COMPLETION	ccpu2(0x80000000)
+#define RNDIS_MSG_COMPLETION	cpu_to_le32(0x80000000)
 
 /* codes for "msg_type" field of rndis messages;
  * only the data channel uses packet messages (maybe batched);
  * everything else goes on the control channel.
  */
-#define RNDIS_MSG_PACKET	ccpu2(0x00000001)	/* 1-N packets */
-#define RNDIS_MSG_INIT		ccpu2(0x00000002)
+#define RNDIS_MSG_PACKET	cpu_to_le32(0x00000001)	/* 1-N packets */
+#define RNDIS_MSG_INIT		cpu_to_le32(0x00000002)
 #define RNDIS_MSG_INIT_C	(RNDIS_MSG_INIT|RNDIS_MSG_COMPLETION)
-#define RNDIS_MSG_HALT		ccpu2(0x00000003)
-#define RNDIS_MSG_QUERY		ccpu2(0x00000004)
+#define RNDIS_MSG_HALT		cpu_to_le32(0x00000003)
+#define RNDIS_MSG_QUERY		cpu_to_le32(0x00000004)
 #define RNDIS_MSG_QUERY_C	(RNDIS_MSG_QUERY|RNDIS_MSG_COMPLETION)
-#define RNDIS_MSG_SET		ccpu2(0x00000005)
+#define RNDIS_MSG_SET		cpu_to_le32(0x00000005)
 #define RNDIS_MSG_SET_C		(RNDIS_MSG_SET|RNDIS_MSG_COMPLETION)
-#define RNDIS_MSG_RESET		ccpu2(0x00000006)
+#define RNDIS_MSG_RESET		cpu_to_le32(0x00000006)
 #define RNDIS_MSG_RESET_C	(RNDIS_MSG_RESET|RNDIS_MSG_COMPLETION)
-#define RNDIS_MSG_INDICATE	ccpu2(0x00000007)
-#define RNDIS_MSG_KEEPALIVE	ccpu2(0x00000008)
+#define RNDIS_MSG_INDICATE	cpu_to_le32(0x00000007)
+#define RNDIS_MSG_KEEPALIVE	cpu_to_le32(0x00000008)
 #define RNDIS_MSG_KEEPALIVE_C	(RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION)
 
 /* codes for "status" field of completion messages */
-#define	RNDIS_STATUS_SUCCESS		ccpu2(0x00000000)
-#define	RNDIS_STATUS_FAILURE		ccpu2(0xc0000001)
-#define	RNDIS_STATUS_INVALID_DATA	ccpu2(0xc0010015)
-#define	RNDIS_STATUS_NOT_SUPPORTED	ccpu2(0xc00000bb)
-#define	RNDIS_STATUS_MEDIA_CONNECT	ccpu2(0x4001000b)
-#define	RNDIS_STATUS_MEDIA_DISCONNECT	ccpu2(0x4001000c)
+#define	RNDIS_STATUS_SUCCESS		cpu_to_le32(0x00000000)
+#define	RNDIS_STATUS_FAILURE		cpu_to_le32(0xc0000001)
+#define	RNDIS_STATUS_INVALID_DATA	cpu_to_le32(0xc0010015)
+#define	RNDIS_STATUS_NOT_SUPPORTED	cpu_to_le32(0xc00000bb)
+#define	RNDIS_STATUS_MEDIA_CONNECT	cpu_to_le32(0x4001000b)
+#define	RNDIS_STATUS_MEDIA_DISCONNECT	cpu_to_le32(0x4001000c)
 
 /* codes for OID_GEN_PHYSICAL_MEDIUM */
-#define	RNDIS_PHYSICAL_MEDIUM_UNSPECIFIED	ccpu2(0x00000000)
-#define	RNDIS_PHYSICAL_MEDIUM_WIRELESS_LAN	ccpu2(0x00000001)
-#define	RNDIS_PHYSICAL_MEDIUM_CABLE_MODEM	ccpu2(0x00000002)
-#define	RNDIS_PHYSICAL_MEDIUM_PHONE_LINE	ccpu2(0x00000003)
-#define	RNDIS_PHYSICAL_MEDIUM_POWER_LINE	ccpu2(0x00000004)
-#define	RNDIS_PHYSICAL_MEDIUM_DSL		ccpu2(0x00000005)
-#define	RNDIS_PHYSICAL_MEDIUM_FIBRE_CHANNEL	ccpu2(0x00000006)
-#define	RNDIS_PHYSICAL_MEDIUM_1394		ccpu2(0x00000007)
-#define	RNDIS_PHYSICAL_MEDIUM_WIRELESS_WAN	ccpu2(0x00000008)
-#define	RNDIS_PHYSICAL_MEDIUM_MAX		ccpu2(0x00000009)
+#define	RNDIS_PHYSICAL_MEDIUM_UNSPECIFIED	cpu_to_le32(0x00000000)
+#define	RNDIS_PHYSICAL_MEDIUM_WIRELESS_LAN	cpu_to_le32(0x00000001)
+#define	RNDIS_PHYSICAL_MEDIUM_CABLE_MODEM	cpu_to_le32(0x00000002)
+#define	RNDIS_PHYSICAL_MEDIUM_PHONE_LINE	cpu_to_le32(0x00000003)
+#define	RNDIS_PHYSICAL_MEDIUM_POWER_LINE	cpu_to_le32(0x00000004)
+#define	RNDIS_PHYSICAL_MEDIUM_DSL		cpu_to_le32(0x00000005)
+#define	RNDIS_PHYSICAL_MEDIUM_FIBRE_CHANNEL	cpu_to_le32(0x00000006)
+#define	RNDIS_PHYSICAL_MEDIUM_1394		cpu_to_le32(0x00000007)
+#define	RNDIS_PHYSICAL_MEDIUM_WIRELESS_WAN	cpu_to_le32(0x00000008)
+#define	RNDIS_PHYSICAL_MEDIUM_MAX		cpu_to_le32(0x00000009)
 
 struct rndis_data_hdr {
 	__le32	msg_type;		/* RNDIS_MSG_PACKET */
@@ -228,24 +225,24 @@ struct rndis_keepalive_c {	/* IN (optionally OUT) */
  * there are gobs more that may optionally be supported.  We'll avoid as much
  * of that mess as possible.
  */
-#define OID_802_3_PERMANENT_ADDRESS	ccpu2(0x01010101)
-#define OID_GEN_MAXIMUM_FRAME_SIZE	ccpu2(0x00010106)
-#define OID_GEN_CURRENT_PACKET_FILTER	ccpu2(0x0001010e)
-#define OID_GEN_PHYSICAL_MEDIUM		ccpu2(0x00010202)
+#define OID_802_3_PERMANENT_ADDRESS	cpu_to_le32(0x01010101)
+#define OID_GEN_MAXIMUM_FRAME_SIZE	cpu_to_le32(0x00010106)
+#define OID_GEN_CURRENT_PACKET_FILTER	cpu_to_le32(0x0001010e)
+#define OID_GEN_PHYSICAL_MEDIUM		cpu_to_le32(0x00010202)
 
 /* packet filter bits used by OID_GEN_CURRENT_PACKET_FILTER */
-#define RNDIS_PACKET_TYPE_DIRECTED		ccpu2(0x00000001)
-#define RNDIS_PACKET_TYPE_MULTICAST		ccpu2(0x00000002)
-#define RNDIS_PACKET_TYPE_ALL_MULTICAST		ccpu2(0x00000004)
-#define RNDIS_PACKET_TYPE_BROADCAST		ccpu2(0x00000008)
-#define RNDIS_PACKET_TYPE_SOURCE_ROUTING	ccpu2(0x00000010)
-#define RNDIS_PACKET_TYPE_PROMISCUOUS		ccpu2(0x00000020)
-#define RNDIS_PACKET_TYPE_SMT			ccpu2(0x00000040)
-#define RNDIS_PACKET_TYPE_ALL_LOCAL		ccpu2(0x00000080)
-#define RNDIS_PACKET_TYPE_GROUP			ccpu2(0x00001000)
-#define RNDIS_PACKET_TYPE_ALL_FUNCTIONAL	ccpu2(0x00002000)
-#define RNDIS_PACKET_TYPE_FUNCTIONAL		ccpu2(0x00004000)
-#define RNDIS_PACKET_TYPE_MAC_FRAME		ccpu2(0x00008000)
+#define RNDIS_PACKET_TYPE_DIRECTED		cpu_to_le32(0x00000001)
+#define RNDIS_PACKET_TYPE_MULTICAST		cpu_to_le32(0x00000002)
+#define RNDIS_PACKET_TYPE_ALL_MULTICAST		cpu_to_le32(0x00000004)
+#define RNDIS_PACKET_TYPE_BROADCAST		cpu_to_le32(0x00000008)
+#define RNDIS_PACKET_TYPE_SOURCE_ROUTING	cpu_to_le32(0x00000010)
+#define RNDIS_PACKET_TYPE_PROMISCUOUS		cpu_to_le32(0x00000020)
+#define RNDIS_PACKET_TYPE_SMT			cpu_to_le32(0x00000040)
+#define RNDIS_PACKET_TYPE_ALL_LOCAL		cpu_to_le32(0x00000080)
+#define RNDIS_PACKET_TYPE_GROUP			cpu_to_le32(0x00001000)
+#define RNDIS_PACKET_TYPE_ALL_FUNCTIONAL	cpu_to_le32(0x00002000)
+#define RNDIS_PACKET_TYPE_FUNCTIONAL		cpu_to_le32(0x00004000)
+#define RNDIS_PACKET_TYPE_MAC_FRAME		cpu_to_le32(0x00008000)
 
 /* default filter used with RNDIS devices */
 #define RNDIS_DEFAULT_FILTER ( \
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index 7d382224307..36fabb95c7d 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -176,6 +176,11 @@ struct skb_data {	/* skb->cb is one of these */
 	size_t			length;
 };
 
+extern int usbnet_open (struct net_device *net);
+extern int usbnet_stop (struct net_device *net);
+extern int usbnet_start_xmit (struct sk_buff *skb, struct net_device *net);
+extern void usbnet_tx_timeout (struct net_device *net);
+extern int usbnet_change_mtu (struct net_device *net, int new_mtu);
 
 extern int usbnet_get_endpoints(struct usbnet *, struct usb_interface *);
 extern void usbnet_defer_kevent (struct usbnet *, int);
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index 3efa86c3ecb..242348bb376 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -22,11 +22,19 @@
 #define VIRTIO_NET_F_HOST_ECN	13	/* Host can handle TSO[6] w/ ECN in. */
 #define VIRTIO_NET_F_HOST_UFO	14	/* Host can handle UFO in. */
 #define VIRTIO_NET_F_MRG_RXBUF	15	/* Host can merge receive buffers. */
+#define VIRTIO_NET_F_STATUS	16	/* virtio_net_config.status available */
+#define VIRTIO_NET_F_CTRL_VQ	17	/* Control channel available */
+#define VIRTIO_NET_F_CTRL_RX	18	/* Control channel RX mode support */
+#define VIRTIO_NET_F_CTRL_VLAN	19	/* Control channel VLAN filtering */
+
+#define VIRTIO_NET_S_LINK_UP	1	/* Link is up */
 
 struct virtio_net_config
 {
 	/* The config defining mac address (if VIRTIO_NET_F_MAC) */
 	__u8 mac[6];
+	/* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
+	__u16 status;
 } __attribute__((packed));
 
 /* This is the first element of the scatter-gather list.  If you don't
@@ -54,4 +62,67 @@ struct virtio_net_hdr_mrg_rxbuf {
 	__u16 num_buffers;	/* Number of merged rx buffers */
 };
 
+/*
+ * Control virtqueue data structures
+ *
+ * The control virtqueue expects a header in the first sg entry
+ * and an ack/status response in the last entry.  Data for the
+ * command goes in between.
+ */
+struct virtio_net_ctrl_hdr {
+	__u8 class;
+	__u8 cmd;
+} __attribute__((packed));
+
+typedef __u8 virtio_net_ctrl_ack;
+
+#define VIRTIO_NET_OK     0
+#define VIRTIO_NET_ERR    1
+
+/*
+ * Control the RX mode, ie. promisucous and allmulti.  PROMISC and
+ * ALLMULTI commands require an "out" sg entry containing a 1 byte
+ * state value, zero = disable, non-zero = enable.  These commands
+ * are supported with the VIRTIO_NET_F_CTRL_RX feature.
+ */
+#define VIRTIO_NET_CTRL_RX    0
+ #define VIRTIO_NET_CTRL_RX_PROMISC      0
+ #define VIRTIO_NET_CTRL_RX_ALLMULTI     1
+
+/*
+ * Control the MAC filter table.
+ *
+ * The MAC filter table is managed by the hypervisor, the guest should
+ * assume the size is infinite.  Filtering should be considered
+ * non-perfect, ie. based on hypervisor resources, the guest may
+ * received packets from sources not specified in the filter list.
+ *
+ * In addition to the class/cmd header, the TABLE_SET command requires
+ * two out scatterlists.  Each contains a 4 byte count of entries followed
+ * by a concatenated byte stream of the ETH_ALEN MAC addresses.  The
+ * first sg list contains unicast addresses, the second is for multicast.
+ * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
+ * is available.
+ */
+struct virtio_net_ctrl_mac {
+	__u32 entries;
+	__u8 macs[][ETH_ALEN];
+} __attribute__((packed));
+
+#define VIRTIO_NET_CTRL_MAC    1
+ #define VIRTIO_NET_CTRL_MAC_TABLE_SET        0
+
+/*
+ * Control VLAN filtering
+ *
+ * The VLAN filter table is controlled via a simple ADD/DEL interface.
+ * VLAN IDs not added may be filterd by the hypervisor.  Del is the
+ * opposite of add.  Both commands expect an out entry containing a 2
+ * byte VLAN ID.  VLAN filterting is available with the
+ * VIRTIO_NET_F_CTRL_VLAN feature bit.
+ */
+#define VIRTIO_NET_CTRL_VLAN       2
+ #define VIRTIO_NET_CTRL_VLAN_ADD             0
+ #define VIRTIO_NET_CTRL_VLAN_DEL             1
+
 #endif /* _LINUX_VIRTIO_NET_H */
diff --git a/include/linux/wimax/i2400m.h b/include/linux/wimax/i2400m.h
index 74198f5bb4d..d5148a7889a 100644
--- a/include/linux/wimax/i2400m.h
+++ b/include/linux/wimax/i2400m.h
@@ -207,6 +207,7 @@ enum i2400m_pt {
 	I2400M_PT_TRACE,	/* For device debug */
 	I2400M_PT_RESET_WARM,	/* device reset */
 	I2400M_PT_RESET_COLD,	/* USB[transport] reset, like reconnect */
+	I2400M_PT_EDATA,	/* Extended RX data */
 	I2400M_PT_ILLEGAL
 };
 
@@ -221,6 +222,48 @@ struct i2400m_pl_data_hdr {
 } __attribute__((packed));
 
 
+/*
+ * Payload for an extended data packet
+ *
+ * New in fw v1.4
+ *
+ * @reorder: if this payload has to be reorder or not (and how)
+ * @cs: the type of data in the packet, as defined per (802.16e
+ *     T11.13.19.1). Currently only 2 (IPv4 packet) supported.
+ *
+ * This is prefixed to each and every INCOMING DATA packet.
+ */
+struct i2400m_pl_edata_hdr {
+	__le32 reorder;		/* bits defined in i2400m_ro */
+	__u8 cs;
+	__u8 reserved[11];
+} __attribute__((packed));
+
+enum i2400m_cs {
+	I2400M_CS_IPV4_0 = 0,
+	I2400M_CS_IPV4 = 2,
+};
+
+enum i2400m_ro {
+	I2400M_RO_NEEDED     = 0x01,
+	I2400M_RO_TYPE       = 0x03,
+	I2400M_RO_TYPE_SHIFT = 1,
+	I2400M_RO_CIN        = 0x0f,
+	I2400M_RO_CIN_SHIFT  = 4,
+	I2400M_RO_FBN        = 0x07ff,
+	I2400M_RO_FBN_SHIFT  = 8,
+	I2400M_RO_SN         = 0x07ff,
+	I2400M_RO_SN_SHIFT   = 21,
+};
+
+enum i2400m_ro_type {
+	I2400M_RO_TYPE_RESET = 0,
+	I2400M_RO_TYPE_PACKET,
+	I2400M_RO_TYPE_WS,
+	I2400M_RO_TYPE_PACKET_WS,
+};
+
+
 /* Misc constants */
 enum {
 	I2400M_PL_PAD = 16,	/* Payload data size alignment */
@@ -381,6 +424,9 @@ enum i2400m_tlv {
 	I2400M_TLV_RF_STATUS = 163,
 	I2400M_TLV_DEVICE_RESET_TYPE = 132,
 	I2400M_TLV_CONFIG_IDLE_PARAMETERS = 601,
+	I2400M_TLV_CONFIG_IDLE_TIMEOUT = 611,
+	I2400M_TLV_CONFIG_D2H_DATA_FORMAT = 614,
+	I2400M_TLV_CONFIG_DL_HOST_REORDER = 615,
 };
 
 
@@ -509,4 +555,27 @@ struct i2400m_tlv_media_status {
 	__le32 media_status;
 } __attribute__((packed));
 
+
+/* New in v1.4 */
+struct i2400m_tlv_config_idle_timeout {
+	struct i2400m_tlv_hdr hdr;
+	__le32 timeout;	/* 100 to 300000 ms [5min], 100 increments
+			 * 0 disabled */
+} __attribute__((packed));
+
+/* New in v1.4 -- for backward compat, will be removed */
+struct i2400m_tlv_config_d2h_data_format {
+	struct i2400m_tlv_hdr hdr;
+	__u8 format; 		/* 0 old format, 1 enhanced */
+	__u8 reserved[3];
+} __attribute__((packed));
+
+/* New in v1.4 */
+struct i2400m_tlv_config_dl_host_reorder {
+	struct i2400m_tlv_hdr hdr;
+	__u8 reorder; 		/* 0 disabled, 1 enabled */
+	__u8 reserved[3];
+} __attribute__((packed));
+
+
 #endif /* #ifndef __LINUX__WIMAX__I2400M_H__ */
diff --git a/include/linux/wireless.h b/include/linux/wireless.h
index d7958f9b52c..cb24204851f 100644
--- a/include/linux/wireless.h
+++ b/include/linux/wireless.h
@@ -577,18 +577,22 @@
 #define IW_AUTH_RX_UNENCRYPTED_EAPOL	8
 #define IW_AUTH_ROAMING_CONTROL		9
 #define IW_AUTH_PRIVACY_INVOKED		10
+#define IW_AUTH_CIPHER_GROUP_MGMT	11
+#define IW_AUTH_MFP			12
 
 /* IW_AUTH_WPA_VERSION values (bit field) */
 #define IW_AUTH_WPA_VERSION_DISABLED	0x00000001
 #define IW_AUTH_WPA_VERSION_WPA		0x00000002
 #define IW_AUTH_WPA_VERSION_WPA2	0x00000004
 
-/* IW_AUTH_PAIRWISE_CIPHER and IW_AUTH_GROUP_CIPHER values (bit field) */
+/* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT
+ * values (bit field) */
 #define IW_AUTH_CIPHER_NONE	0x00000001
 #define IW_AUTH_CIPHER_WEP40	0x00000002
 #define IW_AUTH_CIPHER_TKIP	0x00000004
 #define IW_AUTH_CIPHER_CCMP	0x00000008
 #define IW_AUTH_CIPHER_WEP104	0x00000010
+#define IW_AUTH_CIPHER_AES_CMAC	0x00000020
 
 /* IW_AUTH_KEY_MGMT values (bit field) */
 #define IW_AUTH_KEY_MGMT_802_1X	1
@@ -604,6 +608,11 @@
 #define IW_AUTH_ROAMING_DISABLE	1	/* user space program used for roaming
 					 * control */
 
+/* IW_AUTH_MFP (management frame protection) values */
+#define IW_AUTH_MFP_DISABLED	0	/* MFP disabled */
+#define IW_AUTH_MFP_OPTIONAL	1	/* MFP optional */
+#define IW_AUTH_MFP_REQUIRED	2	/* MFP required */
+
 /* SIOCSIWENCODEEXT definitions */
 #define IW_ENCODE_SEQ_MAX_SIZE	8
 /* struct iw_encode_ext ->alg */
@@ -612,6 +621,7 @@
 #define IW_ENCODE_ALG_TKIP	2
 #define IW_ENCODE_ALG_CCMP	3
 #define IW_ENCODE_ALG_PMK	4
+#define IW_ENCODE_ALG_AES_CMAC	5
 /* struct iw_encode_ext ->ext_flags */
 #define IW_ENCODE_EXT_TX_SEQ_VALID	0x00000001
 #define IW_ENCODE_EXT_RX_SEQ_VALID	0x00000002
diff --git a/include/net/addrconf.h b/include/net/addrconf.h
index c216de528b0..7b55ab215a6 100644
--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -88,8 +88,8 @@ extern int			ipv6_dev_get_saddr(struct net *net,
 extern int			ipv6_get_lladdr(struct net_device *dev,
 						struct in6_addr *addr,
 						unsigned char banned_flags);
-extern int			ipv6_rcv_saddr_equal(const struct sock *sk, 
-						      const struct sock *sk2);
+extern int 			ipv6_rcv_saddr_equal(const struct sock *sk,
+						    const struct sock *sk2);
 extern void			addrconf_join_solict(struct net_device *dev,
 					struct in6_addr *addr);
 extern void			addrconf_leave_solict(struct inet6_dev *idev,
diff --git a/include/net/atmclip.h b/include/net/atmclip.h
index b5a51a7bb36..467c531b8a7 100644
--- a/include/net/atmclip.h
+++ b/include/net/atmclip.h
@@ -50,7 +50,6 @@ struct atmarp_entry {
 struct clip_priv {
 	int number;			/* for convenience ... */
 	spinlock_t xoff_lock;		/* ensures that pop is atomic (SMP) */
-	struct net_device_stats stats;
 	struct net_device *next;	/* next CLIP interface */
 };
 
diff --git a/include/net/ax88796.h b/include/net/ax88796.h
index 51329dae44e..b9a3beca0ce 100644
--- a/include/net/ax88796.h
+++ b/include/net/ax88796.h
@@ -15,14 +15,17 @@
 #define AXFLG_HAS_EEPROM		(1<<0)
 #define AXFLG_MAC_FROMDEV		(1<<1)	/* device already has MAC */
 #define AXFLG_HAS_93CX6			(1<<2)	/* use eeprom_93cx6 driver */
+#define AXFLG_MAC_FROMPLATFORM		(1<<3)	/* MAC given by platform data */
 
 struct ax_plat_data {
 	unsigned int	 flags;
-	unsigned char	 wordlength;		/* 1 or 2 */
-	unsigned char	 dcr_val;		/* default value for DCR */
-	unsigned char	 rcr_val;		/* default value for RCR */
-	unsigned char	 gpoc_val;		/* default value for GPOC */
-	u32		*reg_offsets;		/* register offsets */
+	unsigned char	 wordlength;	/* 1 or 2 */
+	unsigned char	 dcr_val;	/* default value for DCR */
+	unsigned char	 rcr_val;	/* default value for RCR */
+	unsigned char	 gpoc_val;	/* default value for GPOC */
+	u32		*reg_offsets;	/* register offsets */
+	u8		*mac_addr;	/* MAC addr (only used when
+					   AXFLG_MAC_FROMPLATFORM is used */
 };
 
 #endif /* __NET_AX88796_PLAT_H */
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index a04f8463ac7..3ad5390a4dd 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -53,6 +53,17 @@
 #define SOL_SCO		17
 #define SOL_RFCOMM	18
 
+#define BT_SECURITY	4
+struct bt_security {
+	__u8 level;
+};
+#define BT_SECURITY_SDP		0
+#define BT_SECURITY_LOW		1
+#define BT_SECURITY_MEDIUM	2
+#define BT_SECURITY_HIGH	3
+
+#define BT_DEFER_SETUP	7
+
 #define BT_INFO(fmt, arg...) printk(KERN_INFO "Bluetooth: " fmt "\n" , ## arg)
 #define BT_ERR(fmt, arg...)  printk(KERN_ERR "%s: " fmt "\n" , __func__ , ## arg)
 #define BT_DBG(fmt, arg...)  pr_debug("%s: " fmt "\n" , __func__ , ## arg)
@@ -108,6 +119,7 @@ struct bt_sock {
 	bdaddr_t    dst;
 	struct list_head accept_q;
 	struct sock *parent;
+	u32 defer_setup;
 };
 
 struct bt_sock_list {
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 3645139e68c..f69f015bbcc 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -133,8 +133,13 @@ enum {
 #define ESCO_EV3	0x0008
 #define ESCO_EV4	0x0010
 #define ESCO_EV5	0x0020
+#define ESCO_2EV3	0x0040
+#define ESCO_3EV3	0x0080
+#define ESCO_2EV5	0x0100
+#define ESCO_3EV5	0x0200
 
 #define SCO_ESCO_MASK  (ESCO_HV1 | ESCO_HV2 | ESCO_HV3)
+#define EDR_ESCO_MASK  (ESCO_2EV3 | ESCO_3EV3 | ESCO_2EV5 | ESCO_3EV5)
 
 /* ACL flags */
 #define ACL_CONT		0x01
@@ -176,6 +181,9 @@ enum {
 #define LMP_EV5		0x02
 
 #define LMP_SNIFF_SUBR	0x02
+#define LMP_EDR_ESCO_2M	0x20
+#define LMP_EDR_ESCO_3M	0x40
+#define LMP_EDR_3S_ESCO	0x80
 
 #define LMP_SIMPLE_PAIR	0x08
 
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 46a43b721dd..01f9316b4c2 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -169,6 +169,7 @@ struct hci_conn {
 	__u16            link_policy;
 	__u32		 link_mode;
 	__u8             auth_type;
+	__u8             sec_level;
 	__u8             power_save;
 	unsigned long	 pend;
 
@@ -325,12 +326,11 @@ int hci_conn_del(struct hci_conn *conn);
 void hci_conn_hash_flush(struct hci_dev *hdev);
 void hci_conn_check_pending(struct hci_dev *hdev);
 
-struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 auth_type);
+struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 sec_level, __u8 auth_type);
 int hci_conn_check_link_mode(struct hci_conn *conn);
-int hci_conn_auth(struct hci_conn *conn);
-int hci_conn_encrypt(struct hci_conn *conn);
+int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type);
 int hci_conn_change_link_key(struct hci_conn *conn);
-int hci_conn_switch_role(struct hci_conn *conn, uint8_t role);
+int hci_conn_switch_role(struct hci_conn *conn, __u8 role);
 
 void hci_conn_enter_active_mode(struct hci_conn *conn);
 void hci_conn_enter_sniff_mode(struct hci_conn *conn);
@@ -470,26 +470,26 @@ void hci_conn_del_sysfs(struct hci_conn *conn);
 
 /* ----- HCI protocols ----- */
 struct hci_proto {
-	char 		*name;
+	char		*name;
 	unsigned int	id;
 	unsigned long	flags;
 
 	void		*priv;
 
-	int (*connect_ind) 	(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 type);
+	int (*connect_ind)	(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 type);
 	int (*connect_cfm)	(struct hci_conn *conn, __u8 status);
-	int (*disconn_ind)	(struct hci_conn *conn, __u8 reason);
+	int (*disconn_ind)	(struct hci_conn *conn);
+	int (*disconn_cfm)	(struct hci_conn *conn, __u8 reason);
 	int (*recv_acldata)	(struct hci_conn *conn, struct sk_buff *skb, __u16 flags);
 	int (*recv_scodata)	(struct hci_conn *conn, struct sk_buff *skb);
-	int (*auth_cfm)		(struct hci_conn *conn, __u8 status);
-	int (*encrypt_cfm)	(struct hci_conn *conn, __u8 status, __u8 encrypt);
+	int (*security_cfm)	(struct hci_conn *conn, __u8 status, __u8 encrypt);
 };
 
 static inline int hci_proto_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 type)
 {
 	register struct hci_proto *hp;
 	int mask = 0;
-	
+
 	hp = hci_proto[HCI_PROTO_L2CAP];
 	if (hp && hp->connect_ind)
 		mask |= hp->connect_ind(hdev, bdaddr, type);
@@ -514,30 +514,52 @@ static inline void hci_proto_connect_cfm(struct hci_conn *conn, __u8 status)
 		hp->connect_cfm(conn, status);
 }
 
-static inline void hci_proto_disconn_ind(struct hci_conn *conn, __u8 reason)
+static inline int hci_proto_disconn_ind(struct hci_conn *conn)
 {
 	register struct hci_proto *hp;
+	int reason = 0x13;
 
 	hp = hci_proto[HCI_PROTO_L2CAP];
 	if (hp && hp->disconn_ind)
-		hp->disconn_ind(conn, reason);
+		reason = hp->disconn_ind(conn);
 
 	hp = hci_proto[HCI_PROTO_SCO];
 	if (hp && hp->disconn_ind)
-		hp->disconn_ind(conn, reason);
+		reason = hp->disconn_ind(conn);
+
+	return reason;
+}
+
+static inline void hci_proto_disconn_cfm(struct hci_conn *conn, __u8 reason)
+{
+	register struct hci_proto *hp;
+
+	hp = hci_proto[HCI_PROTO_L2CAP];
+	if (hp && hp->disconn_cfm)
+		hp->disconn_cfm(conn, reason);
+
+	hp = hci_proto[HCI_PROTO_SCO];
+	if (hp && hp->disconn_cfm)
+		hp->disconn_cfm(conn, reason);
 }
 
 static inline void hci_proto_auth_cfm(struct hci_conn *conn, __u8 status)
 {
 	register struct hci_proto *hp;
+	__u8 encrypt;
+
+	if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
+		return;
+
+	encrypt = (conn->link_mode & HCI_LM_ENCRYPT) ? 0x01 : 0x00;
 
 	hp = hci_proto[HCI_PROTO_L2CAP];
-	if (hp && hp->auth_cfm)
-		hp->auth_cfm(conn, status);
+	if (hp && hp->security_cfm)
+		hp->security_cfm(conn, status, encrypt);
 
 	hp = hci_proto[HCI_PROTO_SCO];
-	if (hp && hp->auth_cfm)
-		hp->auth_cfm(conn, status);
+	if (hp && hp->security_cfm)
+		hp->security_cfm(conn, status, encrypt);
 }
 
 static inline void hci_proto_encrypt_cfm(struct hci_conn *conn, __u8 status, __u8 encrypt)
@@ -545,12 +567,12 @@ static inline void hci_proto_encrypt_cfm(struct hci_conn *conn, __u8 status, __u
 	register struct hci_proto *hp;
 
 	hp = hci_proto[HCI_PROTO_L2CAP];
-	if (hp && hp->encrypt_cfm)
-		hp->encrypt_cfm(conn, status, encrypt);
+	if (hp && hp->security_cfm)
+		hp->security_cfm(conn, status, encrypt);
 
 	hp = hci_proto[HCI_PROTO_SCO];
-	if (hp && hp->encrypt_cfm)
-		hp->encrypt_cfm(conn, status, encrypt);
+	if (hp && hp->security_cfm)
+		hp->security_cfm(conn, status, encrypt);
 }
 
 int hci_register_proto(struct hci_proto *hproto);
@@ -562,8 +584,7 @@ struct hci_cb {
 
 	char *name;
 
-	void (*auth_cfm)	(struct hci_conn *conn, __u8 status);
-	void (*encrypt_cfm)	(struct hci_conn *conn, __u8 status, __u8 encrypt);
+	void (*security_cfm)	(struct hci_conn *conn, __u8 status, __u8 encrypt);
 	void (*key_change_cfm)	(struct hci_conn *conn, __u8 status);
 	void (*role_switch_cfm)	(struct hci_conn *conn, __u8 status, __u8 role);
 };
@@ -571,14 +592,20 @@ struct hci_cb {
 static inline void hci_auth_cfm(struct hci_conn *conn, __u8 status)
 {
 	struct list_head *p;
+	__u8 encrypt;
 
 	hci_proto_auth_cfm(conn, status);
 
+	if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
+		return;
+
+	encrypt = (conn->link_mode & HCI_LM_ENCRYPT) ? 0x01 : 0x00;
+
 	read_lock_bh(&hci_cb_list_lock);
 	list_for_each(p, &hci_cb_list) {
 		struct hci_cb *cb = list_entry(p, struct hci_cb, list);
-		if (cb->auth_cfm)
-			cb->auth_cfm(conn, status);
+		if (cb->security_cfm)
+			cb->security_cfm(conn, status, encrypt);
 	}
 	read_unlock_bh(&hci_cb_list_lock);
 }
@@ -587,13 +614,16 @@ static inline void hci_encrypt_cfm(struct hci_conn *conn, __u8 status, __u8 encr
 {
 	struct list_head *p;
 
+	if (conn->sec_level == BT_SECURITY_SDP)
+		conn->sec_level = BT_SECURITY_LOW;
+
 	hci_proto_encrypt_cfm(conn, status, encrypt);
 
 	read_lock_bh(&hci_cb_list_lock);
 	list_for_each(p, &hci_cb_list) {
 		struct hci_cb *cb = list_entry(p, struct hci_cb, list);
-		if (cb->encrypt_cfm)
-			cb->encrypt_cfm(conn, status, encrypt);
+		if (cb->security_cfm)
+			cb->security_cfm(conn, status, encrypt);
 	}
 	read_unlock_bh(&hci_cb_list_lock);
 }
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index 73e115bc12d..f566aa1f0a4 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -37,6 +37,7 @@ struct sockaddr_l2 {
 	sa_family_t	l2_family;
 	__le16		l2_psm;
 	bdaddr_t	l2_bdaddr;
+	__le16		l2_cid;
 };
 
 /* L2CAP socket options */
@@ -185,6 +186,7 @@ struct l2cap_info_rsp {
 /* info type */
 #define L2CAP_IT_CL_MTU     0x0001
 #define L2CAP_IT_FEAT_MASK  0x0002
+#define L2CAP_IT_FIXED_CHAN 0x0003
 
 /* info result */
 #define L2CAP_IR_SUCCESS    0x0000
@@ -219,11 +221,14 @@ struct l2cap_conn {
 	__u8		rx_ident;
 	__u8		tx_ident;
 
+	__u8		disc_reason;
+
 	struct l2cap_chan_list chan_list;
 };
 
 #define L2CAP_INFO_CL_MTU_REQ_SENT	0x01
-#define L2CAP_INFO_FEAT_MASK_REQ_SENT	0x02
+#define L2CAP_INFO_FEAT_MASK_REQ_SENT	0x04
+#define L2CAP_INFO_FEAT_MASK_REQ_DONE	0x08
 
 /* ----- L2CAP channel and socket info ----- */
 #define l2cap_pi(sk) ((struct l2cap_pinfo *) sk)
@@ -237,8 +242,9 @@ struct l2cap_pinfo {
 	__u16		imtu;
 	__u16		omtu;
 	__u16		flush_to;
-
-	__u32		link_mode;
+	__u8            sec_level;
+	__u8		role_switch;
+	__u8            force_reliable;
 
 	__u8		conf_req[64];
 	__u8		conf_len;
@@ -257,6 +263,7 @@ struct l2cap_pinfo {
 #define L2CAP_CONF_REQ_SENT	0x01
 #define L2CAP_CONF_INPUT_DONE	0x02
 #define L2CAP_CONF_OUTPUT_DONE	0x04
+#define L2CAP_CONF_CONNECT_PEND	0x80
 
 #define L2CAP_CONF_MAX_RETRIES	2
 
diff --git a/include/net/bluetooth/rfcomm.h b/include/net/bluetooth/rfcomm.h
index 4dc8d92a463..80072611d26 100644
--- a/include/net/bluetooth/rfcomm.h
+++ b/include/net/bluetooth/rfcomm.h
@@ -183,8 +183,9 @@ struct rfcomm_dlc {
 	u8            remote_v24_sig;
 	u8            mscex;
 	u8            out;
-
-	u32           link_mode;
+	u8            sec_level;
+	u8            role_switch;
+	u32           defer_setup;
 
 	uint          mtu;
 	uint          cfc;
@@ -202,10 +203,12 @@ struct rfcomm_dlc {
 #define RFCOMM_RX_THROTTLED 0
 #define RFCOMM_TX_THROTTLED 1
 #define RFCOMM_TIMED_OUT    2
-#define RFCOMM_MSC_PENDING  3 
-#define RFCOMM_AUTH_PENDING 4
-#define RFCOMM_AUTH_ACCEPT  5
-#define RFCOMM_AUTH_REJECT  6
+#define RFCOMM_MSC_PENDING  3
+#define RFCOMM_SEC_PENDING  4
+#define RFCOMM_AUTH_PENDING 5
+#define RFCOMM_AUTH_ACCEPT  6
+#define RFCOMM_AUTH_REJECT  7
+#define RFCOMM_DEFER_SETUP  8
 
 /* Scheduling flags and events */
 #define RFCOMM_SCHED_STATE  0
@@ -239,6 +242,7 @@ int  rfcomm_dlc_close(struct rfcomm_dlc *d, int reason);
 int  rfcomm_dlc_send(struct rfcomm_dlc *d, struct sk_buff *skb);
 int  rfcomm_dlc_set_modem_status(struct rfcomm_dlc *d, u8 v24_sig);
 int  rfcomm_dlc_get_modem_status(struct rfcomm_dlc *d, u8 *v24_sig);
+void rfcomm_dlc_accept(struct rfcomm_dlc *d);
 
 #define rfcomm_dlc_lock(d)     spin_lock(&d->lock)
 #define rfcomm_dlc_unlock(d)   spin_unlock(&d->lock)
@@ -304,7 +308,8 @@ struct rfcomm_pinfo {
 	struct bt_sock bt;
 	struct rfcomm_dlc   *dlc;
 	u8     channel;
-	u32    link_mode;
+	u8     sec_level;
+	u8     role_switch;
 };
 
 int  rfcomm_init_sockets(void);
@@ -333,7 +338,6 @@ struct rfcomm_dev_req {
 	bdaddr_t src;
 	bdaddr_t dst;
 	u8       channel;
-	
 };
 
 struct rfcomm_dev_info {
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 23c0ab74ded..50f3fd9ff52 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -4,6 +4,10 @@
 #include <linux/netlink.h>
 #include <linux/skbuff.h>
 #include <linux/nl80211.h>
+#include <linux/if_ether.h>
+#include <linux/ieee80211.h>
+#include <linux/wireless.h>
+#include <net/iw_handler.h>
 #include <net/genetlink.h>
 /* remove once we remove the wext stuff */
 #include <net/iw_handler.h>
@@ -112,12 +116,14 @@ struct beacon_parameters {
  * @STATION_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
  *	with short preambles
  * @STATION_FLAG_WME: station is WME/QoS capable
+ * @STATION_FLAG_MFP: station uses management frame protection
  */
 enum station_flags {
 	STATION_FLAG_CHANGED		= 1<<0,
 	STATION_FLAG_AUTHORIZED		= 1<<NL80211_STA_FLAG_AUTHORIZED,
 	STATION_FLAG_SHORT_PREAMBLE	= 1<<NL80211_STA_FLAG_SHORT_PREAMBLE,
 	STATION_FLAG_WME		= 1<<NL80211_STA_FLAG_WME,
+	STATION_FLAG_MFP		= 1<<NL80211_STA_FLAG_MFP,
 };
 
 /**
@@ -172,6 +178,8 @@ struct station_parameters {
  * @STATION_INFO_SIGNAL: @signal filled
  * @STATION_INFO_TX_BITRATE: @tx_bitrate fields are filled
  *  (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs)
+ * @STATION_INFO_RX_PACKETS: @rx_packets filled
+ * @STATION_INFO_TX_PACKETS: @tx_packets filled
  */
 enum station_info_flags {
 	STATION_INFO_INACTIVE_TIME	= 1<<0,
@@ -182,6 +190,8 @@ enum station_info_flags {
 	STATION_INFO_PLINK_STATE	= 1<<5,
 	STATION_INFO_SIGNAL		= 1<<6,
 	STATION_INFO_TX_BITRATE		= 1<<7,
+	STATION_INFO_RX_PACKETS		= 1<<8,
+	STATION_INFO_TX_PACKETS		= 1<<9,
 };
 
 /**
@@ -229,6 +239,8 @@ struct rate_info {
  * @plink_state: mesh peer link state
  * @signal: signal strength of last received packet in dBm
  * @txrate: current unicast bitrate to this station
+ * @rx_packets: packets received from this station
+ * @tx_packets: packets transmitted to this station
  */
 struct station_info {
 	u32 filled;
@@ -240,6 +252,8 @@ struct station_info {
 	u8 plink_state;
 	s8 signal;
 	struct rate_info txrate;
+	u32 rx_packets;
+	u32 tx_packets;
 };
 
 /**
@@ -335,24 +349,50 @@ struct bss_parameters {
 };
 
 /**
- * enum reg_set_by - Indicates who is trying to set the regulatory domain
- * @REGDOM_SET_BY_INIT: regulatory domain was set by initialization. We will be
- * 	using a static world regulatory domain by default.
- * @REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world regulatory domain.
- * @REGDOM_SET_BY_USER: User asked the wireless core to set the
- * 	regulatory domain.
- * @REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the wireless core
- *	it thinks its knows the regulatory domain we should be in.
- * @REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an 802.11 country
- *	information element with regulatory information it thinks we
- *	should consider.
+ * enum environment_cap - Environment parsed from country IE
+ * @ENVIRON_ANY: indicates country IE applies to both indoor and
+ *	outdoor operation.
+ * @ENVIRON_INDOOR: indicates country IE applies only to indoor operation
+ * @ENVIRON_OUTDOOR: indicates country IE applies only to outdoor operation
  */
-enum reg_set_by {
-	REGDOM_SET_BY_INIT,
-	REGDOM_SET_BY_CORE,
-	REGDOM_SET_BY_USER,
-	REGDOM_SET_BY_DRIVER,
-	REGDOM_SET_BY_COUNTRY_IE,
+enum environment_cap {
+	ENVIRON_ANY,
+	ENVIRON_INDOOR,
+	ENVIRON_OUTDOOR,
+};
+
+/**
+ * struct regulatory_request - used to keep track of regulatory requests
+ *
+ * @wiphy_idx: this is set if this request's initiator is
+ * 	%REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This
+ * 	can be used by the wireless core to deal with conflicts
+ * 	and potentially inform users of which devices specifically
+ * 	cased the conflicts.
+ * @initiator: indicates who sent this request, could be any of
+ * 	of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*)
+ * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested
+ * 	regulatory domain. We have a few special codes:
+ * 	00 - World regulatory domain
+ * 	99 - built by driver but a specific alpha2 cannot be determined
+ * 	98 - result of an intersection between two regulatory domains
+ * @intersect: indicates whether the wireless core should intersect
+ * 	the requested regulatory domain with the presently set regulatory
+ * 	domain.
+ * @country_ie_checksum: checksum of the last processed and accepted
+ * 	country IE
+ * @country_ie_env: lets us know if the AP is telling us we are outdoor,
+ * 	indoor, or if it doesn't matter
+ * @list: used to insert into the reg_requests_list linked list
+ */
+struct regulatory_request {
+	int wiphy_idx;
+	enum nl80211_reg_initiator initiator;
+	char alpha2[2];
+	bool intersect;
+	u32 country_ie_checksum;
+	enum environment_cap country_ie_env;
+	struct list_head list;
 };
 
 struct ieee80211_freq_range {
@@ -431,6 +471,26 @@ struct ieee80211_txq_params {
 	u8 aifs;
 };
 
+/**
+ * struct mgmt_extra_ie_params - Extra management frame IE parameters
+ *
+ * Used to add extra IE(s) into management frames. If the driver cannot add the
+ * requested data into all management frames of the specified subtype that are
+ * generated in kernel or firmware/hardware, it must reject the configuration
+ * call. The IE data buffer is added to the end of the specified management
+ * frame body after all other IEs. This addition is not applied to frames that
+ * are injected through a monitor interface.
+ *
+ * @subtype: Management frame subtype
+ * @ies: IE data buffer or %NULL to remove previous data
+ * @ies_len: Length of @ies in octets
+ */
+struct mgmt_extra_ie_params {
+	u8 subtype;
+	u8 *ies;
+	int ies_len;
+};
+
 /* from net/wireless.h */
 struct wiphy;
 
@@ -438,6 +498,87 @@ struct wiphy;
 struct ieee80211_channel;
 
 /**
+ * struct cfg80211_ssid - SSID description
+ * @ssid: the SSID
+ * @ssid_len: length of the ssid
+ */
+struct cfg80211_ssid {
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	u8 ssid_len;
+};
+
+/**
+ * struct cfg80211_scan_request - scan request description
+ *
+ * @ssids: SSIDs to scan for (active scan only)
+ * @n_ssids: number of SSIDs
+ * @channels: channels to scan on.
+ * @n_channels: number of channels for each band
+ * @ie: optional information element(s) to add into Probe Request or %NULL
+ * @ie_len: length of ie in octets
+ * @wiphy: the wiphy this was for
+ * @ifidx: the interface index
+ */
+struct cfg80211_scan_request {
+	struct cfg80211_ssid *ssids;
+	int n_ssids;
+	struct ieee80211_channel **channels;
+	u32 n_channels;
+	u8 *ie;
+	size_t ie_len;
+
+	/* internal */
+	struct wiphy *wiphy;
+	int ifidx;
+};
+
+/**
+ * enum cfg80211_signal_type - signal type
+ *
+ * @CFG80211_SIGNAL_TYPE_NONE: no signal strength information available
+ * @CFG80211_SIGNAL_TYPE_MBM: signal strength in mBm (100*dBm)
+ * @CFG80211_SIGNAL_TYPE_UNSPEC: signal strength, increasing from 0 through 100
+ */
+enum cfg80211_signal_type {
+	CFG80211_SIGNAL_TYPE_NONE,
+	CFG80211_SIGNAL_TYPE_MBM,
+	CFG80211_SIGNAL_TYPE_UNSPEC,
+};
+
+/**
+ * struct cfg80211_bss - BSS description
+ *
+ * This structure describes a BSS (which may also be a mesh network)
+ * for use in scan results and similar.
+ *
+ * @bssid: BSSID of the BSS
+ * @tsf: timestamp of last received update
+ * @beacon_interval: the beacon interval as from the frame
+ * @capability: the capability field in host byte order
+ * @information_elements: the information elements (Note that there
+ *	is no guarantee that these are well-formed!)
+ * @len_information_elements: total length of the information elements
+ * @signal: signal strength value (type depends on the wiphy's signal_type)
+ * @free_priv: function pointer to free private data
+ * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes
+ */
+struct cfg80211_bss {
+	struct ieee80211_channel *channel;
+
+	u8 bssid[ETH_ALEN];
+	u64 tsf;
+	u16 beacon_interval;
+	u16 capability;
+	u8 *information_elements;
+	size_t len_information_elements;
+
+	s32 signal;
+
+	void (*free_priv)(struct cfg80211_bss *bss);
+	u8 priv[0] __attribute__((__aligned__(sizeof(void *))));
+};
+
+/**
  * struct cfg80211_ops - backend description for wireless configuration
  *
  * This struct is registered by fullmac card drivers and/or wireless stacks
@@ -450,6 +591,9 @@ struct ieee80211_channel;
  * wireless extensions but this is subject to reevaluation as soon as this
  * code is used more widely and we have a first user without wext.
  *
+ * @suspend: wiphy device needs to be suspended
+ * @resume: wiphy device needs to be resumed
+ *
  * @add_virtual_intf: create a new virtual interface with the given name,
  *	must set the struct wireless_dev's iftype.
  *
@@ -471,6 +615,8 @@ struct ieee80211_channel;
  *
  * @set_default_key: set the default key on an interface
  *
+ * @set_default_mgmt_key: set the default management frame key on an interface
+ *
  * @add_beacon: Add a beacon with given parameters, @head, @interval
  *	and @dtim_period will be valid, @tail is optional.
  * @set_beacon: Change the beacon parameters for an access point mode
@@ -497,8 +643,18 @@ struct ieee80211_channel;
  * @set_txq_params: Set TX queue parameters
  *
  * @set_channel: Set channel
+ *
+ * @set_mgmt_extra_ie: Set extra IE data for management frames
+ *
+ * @scan: Request to do a scan. If returning zero, the scan request is given
+ *	the driver, and will be valid until passed to cfg80211_scan_done().
+ *	For scan results, call cfg80211_inform_bss(); you can call this outside
+ *	the scan/scan_done bracket too.
  */
 struct cfg80211_ops {
+	int	(*suspend)(struct wiphy *wiphy);
+	int	(*resume)(struct wiphy *wiphy);
+
 	int	(*add_virtual_intf)(struct wiphy *wiphy, char *name,
 				    enum nl80211_iftype type, u32 *flags,
 				    struct vif_params *params);
@@ -518,6 +674,9 @@ struct cfg80211_ops {
 	int	(*set_default_key)(struct wiphy *wiphy,
 				   struct net_device *netdev,
 				   u8 key_index);
+	int	(*set_default_mgmt_key)(struct wiphy *wiphy,
+					struct net_device *netdev,
+					u8 key_index);
 
 	int	(*add_beacon)(struct wiphy *wiphy, struct net_device *dev,
 			      struct beacon_parameters *info);
@@ -564,6 +723,13 @@ struct cfg80211_ops {
 	int	(*set_channel)(struct wiphy *wiphy,
 			       struct ieee80211_channel *chan,
 			       enum nl80211_channel_type channel_type);
+
+	int	(*set_mgmt_extra_ie)(struct wiphy *wiphy,
+				     struct net_device *dev,
+				     struct mgmt_extra_ie_params *params);
+
+	int	(*scan)(struct wiphy *wiphy, struct net_device *dev,
+			struct cfg80211_scan_request *request);
 };
 
 /* temporary wext handlers */
@@ -574,5 +740,71 @@ int cfg80211_wext_siwmode(struct net_device *dev, struct iw_request_info *info,
 			  u32 *mode, char *extra);
 int cfg80211_wext_giwmode(struct net_device *dev, struct iw_request_info *info,
 			  u32 *mode, char *extra);
+int cfg80211_wext_siwscan(struct net_device *dev,
+			  struct iw_request_info *info,
+			  union iwreq_data *wrqu, char *extra);
+int cfg80211_wext_giwscan(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_point *data, char *extra);
+int cfg80211_wext_giwrange(struct net_device *dev,
+			   struct iw_request_info *info,
+			   struct iw_point *data, char *extra);
+
+/**
+ * cfg80211_scan_done - notify that scan finished
+ *
+ * @request: the corresponding scan request
+ * @aborted: set to true if the scan was aborted for any reason,
+ *	userspace will be notified of that
+ */
+void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted);
+
+/**
+ * cfg80211_inform_bss - inform cfg80211 of a new BSS
+ *
+ * @wiphy: the wiphy reporting the BSS
+ * @bss: the found BSS
+ * @signal: the signal strength, type depends on the wiphy's signal_type
+ * @gfp: context flags
+ *
+ * This informs cfg80211 that BSS information was found and
+ * the BSS should be updated/added.
+ */
+struct cfg80211_bss*
+cfg80211_inform_bss_frame(struct wiphy *wiphy,
+			  struct ieee80211_channel *channel,
+			  struct ieee80211_mgmt *mgmt, size_t len,
+			  s32 signal, gfp_t gfp);
+
+struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy,
+				      struct ieee80211_channel *channel,
+				      const u8 *bssid,
+				      const u8 *ssid, size_t ssid_len,
+				      u16 capa_mask, u16 capa_val);
+static inline struct cfg80211_bss *
+cfg80211_get_ibss(struct wiphy *wiphy,
+		  struct ieee80211_channel *channel,
+		  const u8 *ssid, size_t ssid_len)
+{
+	return cfg80211_get_bss(wiphy, channel, NULL, ssid, ssid_len,
+				WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS);
+}
+
+struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy,
+				       struct ieee80211_channel *channel,
+				       const u8 *meshid, size_t meshidlen,
+				       const u8 *meshcfg);
+void cfg80211_put_bss(struct cfg80211_bss *bss);
+/**
+ * cfg80211_unlink_bss - unlink BSS from internal data structures
+ * @wiphy: the wiphy
+ * @bss: the bss to remove
+ *
+ * This function removes the given BSS from the internal data structures
+ * thereby making it no longer show up in scan results etc. Use this
+ * function when you detect a BSS is gone. Normally BSSes will also time
+ * out, so it is not necessary to use this function at all.
+ */
+void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss);
 
 #endif /* __NET_CFG80211_H */
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 52e97bfca5a..839f768f9e3 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -1,6 +1,6 @@
 /*
  * include/net/dsa.h - Driver for Distributed Switch Architecture switch chips
- * Copyright (c) 2008 Marvell Semiconductor
+ * Copyright (c) 2008-2009 Marvell Semiconductor
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -11,23 +11,47 @@
 #ifndef __LINUX_NET_DSA_H
 #define __LINUX_NET_DSA_H
 
-#define DSA_MAX_PORTS	12
+#define DSA_MAX_SWITCHES	4
+#define DSA_MAX_PORTS		12
+
+struct dsa_chip_data {
+	/*
+	 * How to access the switch configuration registers.
+	 */
+	struct device	*mii_bus;
+	int		sw_addr;
+
+	/*
+	 * The names of the switch's ports.  Use "cpu" to
+	 * designate the switch port that the cpu is connected to,
+	 * "dsa" to indicate that this port is a DSA link to
+	 * another switch, NULL to indicate the port is unused,
+	 * or any other string to indicate this is a physical port.
+	 */
+	char		*port_names[DSA_MAX_PORTS];
+
+	/*
+	 * An array (with nr_chips elements) of which element [a]
+	 * indicates which port on this switch should be used to
+	 * send packets to that are destined for switch a.  Can be
+	 * NULL if there is only one switch chip.
+	 */
+	s8		*rtable;
+};
 
 struct dsa_platform_data {
 	/*
 	 * Reference to a Linux network interface that connects
-	 * to the switch chip.
+	 * to the root switch chip of the tree.
 	 */
 	struct device	*netdev;
 
 	/*
-	 * How to access the switch configuration registers, and
-	 * the names of the switch ports (use "cpu" to designate
-	 * the switch port that the cpu is connected to).
+	 * Info structs describing each of the switch chips
+	 * connected via this network interface.
 	 */
-	struct device	*mii_bus;
-	int		sw_addr;
-	char		*port_names[DSA_MAX_PORTS];
+	int		nr_chips;
+	struct dsa_chip_data	*chip;
 };
 
 extern bool dsa_uses_dsa_tags(void *dsa_ptr);
diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h
deleted file mode 100644
index adb7cf31f78..00000000000
--- a/include/net/ieee80211.h
+++ /dev/null
@@ -1,1185 +0,0 @@
-/*
- * Merged with mainline ieee80211.h in Aug 2004.  Original ieee802_11
- * remains copyright by the original authors
- *
- * Portions of the merged code are based on Host AP (software wireless
- * LAN access point) driver for Intersil Prism2/2.5/3.
- *
- * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- * <j@w1.fi>
- * Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
- *
- * Adaption to a generic IEEE 802.11 stack by James Ketrenos
- * <jketreno@linux.intel.com>
- * Copyright (c) 2004-2005, Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation. See README and COPYING for
- * more details.
- *
- * API Version History
- * 1.0.x -- Initial version
- * 1.1.x -- Added radiotap, QoS, TIM, ieee80211_geo APIs,
- *          various structure changes, and crypto API init method
- */
-#ifndef IEEE80211_H
-#define IEEE80211_H
-#include <linux/if_ether.h>	/* ETH_ALEN */
-#include <linux/kernel.h>	/* ARRAY_SIZE */
-#include <linux/wireless.h>
-#include <linux/ieee80211.h>
-
-#include <net/lib80211.h>
-
-#define IEEE80211_VERSION "git-1.1.13"
-
-#define IEEE80211_DATA_LEN		2304
-/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
-   6.2.1.1.2.
-
-   The figure in section 7.1.2 suggests a body size of up to 2312
-   bytes is allowed, which is a bit confusing, I suspect this
-   represents the 2304 bytes of real data, plus a possible 8 bytes of
-   WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
-
-#define IEEE80211_1ADDR_LEN 10
-#define IEEE80211_2ADDR_LEN 16
-#define IEEE80211_3ADDR_LEN 24
-#define IEEE80211_4ADDR_LEN 30
-#define IEEE80211_FCS_LEN    4
-#define IEEE80211_HLEN			(IEEE80211_4ADDR_LEN)
-#define IEEE80211_FRAME_LEN		(IEEE80211_DATA_LEN + IEEE80211_HLEN)
-
-#define MIN_FRAG_THRESHOLD     256U
-#define	MAX_FRAG_THRESHOLD     2346U
-
-/* Frame control field constants */
-#define IEEE80211_FCTL_VERS		0x0003
-#define IEEE80211_FCTL_FTYPE		0x000c
-#define IEEE80211_FCTL_STYPE		0x00f0
-#define IEEE80211_FCTL_TODS		0x0100
-#define IEEE80211_FCTL_FROMDS		0x0200
-#define IEEE80211_FCTL_MOREFRAGS	0x0400
-#define IEEE80211_FCTL_RETRY		0x0800
-#define IEEE80211_FCTL_PM		0x1000
-#define IEEE80211_FCTL_MOREDATA		0x2000
-#define IEEE80211_FCTL_PROTECTED	0x4000
-#define IEEE80211_FCTL_ORDER		0x8000
-
-#define IEEE80211_FTYPE_MGMT		0x0000
-#define IEEE80211_FTYPE_CTL		0x0004
-#define IEEE80211_FTYPE_DATA		0x0008
-
-/* management */
-#define IEEE80211_STYPE_ASSOC_REQ	0x0000
-#define IEEE80211_STYPE_ASSOC_RESP 	0x0010
-#define IEEE80211_STYPE_REASSOC_REQ	0x0020
-#define IEEE80211_STYPE_REASSOC_RESP	0x0030
-#define IEEE80211_STYPE_PROBE_REQ	0x0040
-#define IEEE80211_STYPE_PROBE_RESP	0x0050
-#define IEEE80211_STYPE_BEACON		0x0080
-#define IEEE80211_STYPE_ATIM		0x0090
-#define IEEE80211_STYPE_DISASSOC	0x00A0
-#define IEEE80211_STYPE_AUTH		0x00B0
-#define IEEE80211_STYPE_DEAUTH		0x00C0
-#define IEEE80211_STYPE_ACTION		0x00D0
-
-/* control */
-#define IEEE80211_STYPE_PSPOLL		0x00A0
-#define IEEE80211_STYPE_RTS		0x00B0
-#define IEEE80211_STYPE_CTS		0x00C0
-#define IEEE80211_STYPE_ACK		0x00D0
-#define IEEE80211_STYPE_CFEND		0x00E0
-#define IEEE80211_STYPE_CFENDACK	0x00F0
-
-/* data */
-#define IEEE80211_STYPE_DATA		0x0000
-#define IEEE80211_STYPE_DATA_CFACK	0x0010
-#define IEEE80211_STYPE_DATA_CFPOLL	0x0020
-#define IEEE80211_STYPE_DATA_CFACKPOLL	0x0030
-#define IEEE80211_STYPE_NULLFUNC	0x0040
-#define IEEE80211_STYPE_CFACK		0x0050
-#define IEEE80211_STYPE_CFPOLL		0x0060
-#define IEEE80211_STYPE_CFACKPOLL	0x0070
-#define IEEE80211_STYPE_QOS_DATA        0x0080
-
-#define IEEE80211_SCTL_FRAG		0x000F
-#define IEEE80211_SCTL_SEQ		0xFFF0
-
-/* QOS control */
-#define IEEE80211_QCTL_TID		0x000F
-
-/* debug macros */
-
-#ifdef CONFIG_IEEE80211_DEBUG
-extern u32 ieee80211_debug_level;
-#define IEEE80211_DEBUG(level, fmt, args...) \
-do { if (ieee80211_debug_level & (level)) \
-  printk(KERN_DEBUG "ieee80211: %c %s " fmt, \
-         in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0)
-static inline bool ieee80211_ratelimit_debug(u32 level)
-{
-	return (ieee80211_debug_level & level) && net_ratelimit();
-}
-#else
-#define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
-static inline bool ieee80211_ratelimit_debug(u32 level)
-{
-	return false;
-}
-#endif				/* CONFIG_IEEE80211_DEBUG */
-
-/*
- * To use the debug system:
- *
- * If you are defining a new debug classification, simply add it to the #define
- * list here in the form of:
- *
- * #define IEEE80211_DL_xxxx VALUE
- *
- * shifting value to the left one bit from the previous entry.  xxxx should be
- * the name of the classification (for example, WEP)
- *
- * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your
- * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want
- * to send output to that classification.
- *
- * To add your debug level to the list of levels seen when you perform
- *
- * % cat /proc/net/ieee80211/debug_level
- *
- * you simply need to add your entry to the ieee80211_debug_level array.
- *
- * If you do not see debug_level in /proc/net/ieee80211 then you do not have
- * CONFIG_IEEE80211_DEBUG defined in your kernel configuration
- *
- */
-
-#define IEEE80211_DL_INFO          (1<<0)
-#define IEEE80211_DL_WX            (1<<1)
-#define IEEE80211_DL_SCAN          (1<<2)
-#define IEEE80211_DL_STATE         (1<<3)
-#define IEEE80211_DL_MGMT          (1<<4)
-#define IEEE80211_DL_FRAG          (1<<5)
-#define IEEE80211_DL_DROP          (1<<7)
-
-#define IEEE80211_DL_TX            (1<<8)
-#define IEEE80211_DL_RX            (1<<9)
-#define IEEE80211_DL_QOS           (1<<31)
-
-#define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
-#define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
-#define IEEE80211_DEBUG_INFO(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
-
-#define IEEE80211_DEBUG_WX(f, a...)     IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
-#define IEEE80211_DEBUG_SCAN(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
-#define IEEE80211_DEBUG_STATE(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
-#define IEEE80211_DEBUG_MGMT(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
-#define IEEE80211_DEBUG_FRAG(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
-#define IEEE80211_DEBUG_DROP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
-#define IEEE80211_DEBUG_TX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
-#define IEEE80211_DEBUG_RX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
-#define IEEE80211_DEBUG_QOS(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_QOS, f, ## a)
-#include <linux/netdevice.h>
-#include <linux/if_arp.h>	/* ARPHRD_ETHER */
-
-#ifndef WIRELESS_SPY
-#define WIRELESS_SPY		/* enable iwspy support */
-#endif
-#include <net/iw_handler.h>	/* new driver API */
-
-#define ETH_P_PREAUTH 0x88C7	/* IEEE 802.11i pre-authentication */
-
-#ifndef ETH_P_80211_RAW
-#define ETH_P_80211_RAW (ETH_P_ECONET + 1)
-#endif
-
-/* IEEE 802.11 defines */
-
-#define P80211_OUI_LEN 3
-
-struct ieee80211_snap_hdr {
-
-	u8 dsap;		/* always 0xAA */
-	u8 ssap;		/* always 0xAA */
-	u8 ctrl;		/* always 0x03 */
-	u8 oui[P80211_OUI_LEN];	/* organizational universal id */
-
-} __attribute__ ((packed));
-
-#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
-
-#define WLAN_FC_GET_VERS(fc) ((fc) & IEEE80211_FCTL_VERS)
-#define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
-#define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
-
-#define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
-#define WLAN_GET_SEQ_SEQ(seq)  (((seq) & IEEE80211_SCTL_SEQ) >> 4)
-
-/* Action categories - 802.11h */
-enum ieee80211_actioncategories {
-	WLAN_ACTION_SPECTRUM_MGMT = 0,
-	/* Reserved 1-127  */
-	/* Error    128-255 */
-};
-
-/* Action details - 802.11h */
-enum ieee80211_actiondetails {
-	WLAN_ACTION_CATEGORY_MEASURE_REQUEST = 0,
-	WLAN_ACTION_CATEGORY_MEASURE_REPORT = 1,
-	WLAN_ACTION_CATEGORY_TPC_REQUEST = 2,
-	WLAN_ACTION_CATEGORY_TPC_REPORT = 3,
-	WLAN_ACTION_CATEGORY_CHANNEL_SWITCH = 4,
-	/* 5 - 255 Reserved */
-};
-
-#define IEEE80211_STATMASK_SIGNAL (1<<0)
-#define IEEE80211_STATMASK_RSSI (1<<1)
-#define IEEE80211_STATMASK_NOISE (1<<2)
-#define IEEE80211_STATMASK_RATE (1<<3)
-#define IEEE80211_STATMASK_WEMASK 0x7
-
-#define IEEE80211_CCK_MODULATION    (1<<0)
-#define IEEE80211_OFDM_MODULATION   (1<<1)
-
-#define IEEE80211_24GHZ_BAND     (1<<0)
-#define IEEE80211_52GHZ_BAND     (1<<1)
-
-#define IEEE80211_CCK_RATE_1MB		        0x02
-#define IEEE80211_CCK_RATE_2MB		        0x04
-#define IEEE80211_CCK_RATE_5MB		        0x0B
-#define IEEE80211_CCK_RATE_11MB		        0x16
-#define IEEE80211_OFDM_RATE_6MB		        0x0C
-#define IEEE80211_OFDM_RATE_9MB		        0x12
-#define IEEE80211_OFDM_RATE_12MB		0x18
-#define IEEE80211_OFDM_RATE_18MB		0x24
-#define IEEE80211_OFDM_RATE_24MB		0x30
-#define IEEE80211_OFDM_RATE_36MB		0x48
-#define IEEE80211_OFDM_RATE_48MB		0x60
-#define IEEE80211_OFDM_RATE_54MB		0x6C
-#define IEEE80211_BASIC_RATE_MASK		0x80
-
-#define IEEE80211_CCK_RATE_1MB_MASK		(1<<0)
-#define IEEE80211_CCK_RATE_2MB_MASK		(1<<1)
-#define IEEE80211_CCK_RATE_5MB_MASK		(1<<2)
-#define IEEE80211_CCK_RATE_11MB_MASK		(1<<3)
-#define IEEE80211_OFDM_RATE_6MB_MASK		(1<<4)
-#define IEEE80211_OFDM_RATE_9MB_MASK		(1<<5)
-#define IEEE80211_OFDM_RATE_12MB_MASK		(1<<6)
-#define IEEE80211_OFDM_RATE_18MB_MASK		(1<<7)
-#define IEEE80211_OFDM_RATE_24MB_MASK		(1<<8)
-#define IEEE80211_OFDM_RATE_36MB_MASK		(1<<9)
-#define IEEE80211_OFDM_RATE_48MB_MASK		(1<<10)
-#define IEEE80211_OFDM_RATE_54MB_MASK		(1<<11)
-
-#define IEEE80211_CCK_RATES_MASK	        0x0000000F
-#define IEEE80211_CCK_BASIC_RATES_MASK	(IEEE80211_CCK_RATE_1MB_MASK | \
-	IEEE80211_CCK_RATE_2MB_MASK)
-#define IEEE80211_CCK_DEFAULT_RATES_MASK	(IEEE80211_CCK_BASIC_RATES_MASK | \
-        IEEE80211_CCK_RATE_5MB_MASK | \
-        IEEE80211_CCK_RATE_11MB_MASK)
-
-#define IEEE80211_OFDM_RATES_MASK		0x00000FF0
-#define IEEE80211_OFDM_BASIC_RATES_MASK	(IEEE80211_OFDM_RATE_6MB_MASK | \
-	IEEE80211_OFDM_RATE_12MB_MASK | \
-	IEEE80211_OFDM_RATE_24MB_MASK)
-#define IEEE80211_OFDM_DEFAULT_RATES_MASK	(IEEE80211_OFDM_BASIC_RATES_MASK | \
-	IEEE80211_OFDM_RATE_9MB_MASK  | \
-	IEEE80211_OFDM_RATE_18MB_MASK | \
-	IEEE80211_OFDM_RATE_36MB_MASK | \
-	IEEE80211_OFDM_RATE_48MB_MASK | \
-	IEEE80211_OFDM_RATE_54MB_MASK)
-#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
-                                IEEE80211_CCK_DEFAULT_RATES_MASK)
-
-#define IEEE80211_NUM_OFDM_RATES	    8
-#define IEEE80211_NUM_CCK_RATES	            4
-#define IEEE80211_OFDM_SHIFT_MASK_A         4
-
-/* NOTE: This data is for statistical purposes; not all hardware provides this
- *       information for frames received.
- *       For ieee80211_rx_mgt, you need to set at least the 'len' parameter.
- */
-struct ieee80211_rx_stats {
-	u32 mac_time;
-	s8 rssi;
-	u8 signal;
-	u8 noise;
-	u16 rate;		/* in 100 kbps */
-	u8 received_channel;
-	u8 control;
-	u8 mask;
-	u8 freq;
-	u16 len;
-	u64 tsf;
-	u32 beacon_time;
-};
-
-/* IEEE 802.11 requires that STA supports concurrent reception of at least
- * three fragmented frames. This define can be increased to support more
- * concurrent frames, but it should be noted that each entry can consume about
- * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
-#define IEEE80211_FRAG_CACHE_LEN 4
-
-struct ieee80211_frag_entry {
-	unsigned long first_frag_time;
-	unsigned int seq;
-	unsigned int last_frag;
-	struct sk_buff *skb;
-	u8 src_addr[ETH_ALEN];
-	u8 dst_addr[ETH_ALEN];
-};
-
-struct ieee80211_stats {
-	unsigned int tx_unicast_frames;
-	unsigned int tx_multicast_frames;
-	unsigned int tx_fragments;
-	unsigned int tx_unicast_octets;
-	unsigned int tx_multicast_octets;
-	unsigned int tx_deferred_transmissions;
-	unsigned int tx_single_retry_frames;
-	unsigned int tx_multiple_retry_frames;
-	unsigned int tx_retry_limit_exceeded;
-	unsigned int tx_discards;
-	unsigned int rx_unicast_frames;
-	unsigned int rx_multicast_frames;
-	unsigned int rx_fragments;
-	unsigned int rx_unicast_octets;
-	unsigned int rx_multicast_octets;
-	unsigned int rx_fcs_errors;
-	unsigned int rx_discards_no_buffer;
-	unsigned int tx_discards_wrong_sa;
-	unsigned int rx_discards_undecryptable;
-	unsigned int rx_message_in_msg_fragments;
-	unsigned int rx_message_in_bad_msg_fragments;
-};
-
-struct ieee80211_device;
-
-#define SEC_KEY_1		(1<<0)
-#define SEC_KEY_2		(1<<1)
-#define SEC_KEY_3		(1<<2)
-#define SEC_KEY_4		(1<<3)
-#define SEC_ACTIVE_KEY		(1<<4)
-#define SEC_AUTH_MODE		(1<<5)
-#define SEC_UNICAST_GROUP	(1<<6)
-#define SEC_LEVEL		(1<<7)
-#define SEC_ENABLED		(1<<8)
-#define SEC_ENCRYPT		(1<<9)
-
-#define SEC_LEVEL_0		0	/* None */
-#define SEC_LEVEL_1		1	/* WEP 40 and 104 bit */
-#define SEC_LEVEL_2		2	/* Level 1 + TKIP */
-#define SEC_LEVEL_2_CKIP	3	/* Level 1 + CKIP */
-#define SEC_LEVEL_3		4	/* Level 2 + CCMP */
-
-#define SEC_ALG_NONE		0
-#define SEC_ALG_WEP		1
-#define SEC_ALG_TKIP		2
-#define SEC_ALG_CCMP		3
-
-#define WEP_KEYS		4
-#define WEP_KEY_LEN		13
-#define SCM_KEY_LEN		32
-#define SCM_TEMPORAL_KEY_LENGTH	16
-
-struct ieee80211_security {
-	u16 active_key:2, enabled:1, unicast_uses_group:1, encrypt:1;
-	u8 auth_mode;
-	u8 encode_alg[WEP_KEYS];
-	u8 key_sizes[WEP_KEYS];
-	u8 keys[WEP_KEYS][SCM_KEY_LEN];
-	u8 level;
-	u16 flags;
-} __attribute__ ((packed));
-
-/*
-
- 802.11 data frame from AP
-
-      ,-------------------------------------------------------------------.
-Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
-      |------|------|---------|---------|---------|------|---------|------|
-Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  frame  |  fcs |
-      |      | tion | (BSSID) |         |         | ence |  data   |      |
-      `-------------------------------------------------------------------'
-
-Total: 28-2340 bytes
-
-*/
-
-#define BEACON_PROBE_SSID_ID_POSITION 12
-
-/* Management Frame Information Element Types */
-enum ieee80211_mfie {
-	MFIE_TYPE_SSID = 0,
-	MFIE_TYPE_RATES = 1,
-	MFIE_TYPE_FH_SET = 2,
-	MFIE_TYPE_DS_SET = 3,
-	MFIE_TYPE_CF_SET = 4,
-	MFIE_TYPE_TIM = 5,
-	MFIE_TYPE_IBSS_SET = 6,
-	MFIE_TYPE_COUNTRY = 7,
-	MFIE_TYPE_HOP_PARAMS = 8,
-	MFIE_TYPE_HOP_TABLE = 9,
-	MFIE_TYPE_REQUEST = 10,
-	MFIE_TYPE_CHALLENGE = 16,
-	MFIE_TYPE_POWER_CONSTRAINT = 32,
-	MFIE_TYPE_POWER_CAPABILITY = 33,
-	MFIE_TYPE_TPC_REQUEST = 34,
-	MFIE_TYPE_TPC_REPORT = 35,
-	MFIE_TYPE_SUPP_CHANNELS = 36,
-	MFIE_TYPE_CSA = 37,
-	MFIE_TYPE_MEASURE_REQUEST = 38,
-	MFIE_TYPE_MEASURE_REPORT = 39,
-	MFIE_TYPE_QUIET = 40,
-	MFIE_TYPE_IBSS_DFS = 41,
-	MFIE_TYPE_ERP_INFO = 42,
-	MFIE_TYPE_RSN = 48,
-	MFIE_TYPE_RATES_EX = 50,
-	MFIE_TYPE_GENERIC = 221,
-	MFIE_TYPE_QOS_PARAMETER = 222,
-};
-
-struct ieee80211_hdr_1addr {
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 payload[0];
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_2addr {
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 payload[0];
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_3addr {
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 addr3[ETH_ALEN];
-	__le16 seq_ctl;
-	u8 payload[0];
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_4addr {
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 addr3[ETH_ALEN];
-	__le16 seq_ctl;
-	u8 addr4[ETH_ALEN];
-	u8 payload[0];
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_3addrqos {
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 addr3[ETH_ALEN];
-	__le16 seq_ctl;
-	u8 payload[0];
-	__le16 qos_ctl;
-} __attribute__ ((packed));
-
-struct ieee80211_info_element {
-	u8 id;
-	u8 len;
-	u8 data[0];
-} __attribute__ ((packed));
-
-/*
- * These are the data types that can make up management packets
- *
-	u16 auth_algorithm;
-	u16 auth_sequence;
-	u16 beacon_interval;
-	u16 capability;
-	u8 current_ap[ETH_ALEN];
-	u16 listen_interval;
-	struct {
-		u16 association_id:14, reserved:2;
-	} __attribute__ ((packed));
-	u32 time_stamp[2];
-	u16 reason;
-	u16 status;
-*/
-
-struct ieee80211_auth {
-	struct ieee80211_hdr_3addr header;
-	__le16 algorithm;
-	__le16 transaction;
-	__le16 status;
-	/* challenge */
-	struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-struct ieee80211_channel_switch {
-	u8 id;
-	u8 len;
-	u8 mode;
-	u8 channel;
-	u8 count;
-} __attribute__ ((packed));
-
-struct ieee80211_action {
-	struct ieee80211_hdr_3addr header;
-	u8 category;
-	u8 action;
-	union {
-		struct ieee80211_action_exchange {
-			u8 token;
-			struct ieee80211_info_element info_element[0];
-		} exchange;
-		struct ieee80211_channel_switch channel_switch;
-
-	} format;
-} __attribute__ ((packed));
-
-struct ieee80211_disassoc {
-	struct ieee80211_hdr_3addr header;
-	__le16 reason;
-} __attribute__ ((packed));
-
-/* Alias deauth for disassoc */
-#define ieee80211_deauth ieee80211_disassoc
-
-struct ieee80211_probe_request {
-	struct ieee80211_hdr_3addr header;
-	/* SSID, supported rates */
-	struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-struct ieee80211_probe_response {
-	struct ieee80211_hdr_3addr header;
-	__le32 time_stamp[2];
-	__le16 beacon_interval;
-	__le16 capability;
-	/* SSID, supported rates, FH params, DS params,
-	 * CF params, IBSS params, TIM (if beacon), RSN */
-	struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-/* Alias beacon for probe_response */
-#define ieee80211_beacon ieee80211_probe_response
-
-struct ieee80211_assoc_request {
-	struct ieee80211_hdr_3addr header;
-	__le16 capability;
-	__le16 listen_interval;
-	/* SSID, supported rates, RSN */
-	struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-struct ieee80211_reassoc_request {
-	struct ieee80211_hdr_3addr header;
-	__le16 capability;
-	__le16 listen_interval;
-	u8 current_ap[ETH_ALEN];
-	struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-struct ieee80211_assoc_response {
-	struct ieee80211_hdr_3addr header;
-	__le16 capability;
-	__le16 status;
-	__le16 aid;
-	/* supported rates */
-	struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-struct ieee80211_txb {
-	u8 nr_frags;
-	u8 encrypted;
-	u8 rts_included;
-	u8 reserved;
-	u16 frag_size;
-	u16 payload_size;
-	struct sk_buff *fragments[0];
-};
-
-/* SWEEP TABLE ENTRIES NUMBER */
-#define MAX_SWEEP_TAB_ENTRIES		  42
-#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET  7
-/* MAX_RATES_LENGTH needs to be 12.  The spec says 8, and many APs
- * only use 8, and then use extended rates for the remaining supported
- * rates.  Other APs, however, stick all of their supported rates on the
- * main rates information element... */
-#define MAX_RATES_LENGTH                  ((u8)12)
-#define MAX_RATES_EX_LENGTH               ((u8)16)
-#define MAX_NETWORK_COUNT                  128
-
-#define CRC_LENGTH                 4U
-
-#define MAX_WPA_IE_LEN 64
-
-#define NETWORK_HAS_OFDM       (1<<1)
-#define NETWORK_HAS_CCK        (1<<2)
-
-/* QoS structure */
-#define NETWORK_HAS_QOS_PARAMETERS      (1<<3)
-#define NETWORK_HAS_QOS_INFORMATION     (1<<4)
-#define NETWORK_HAS_QOS_MASK            (NETWORK_HAS_QOS_PARAMETERS | \
-					 NETWORK_HAS_QOS_INFORMATION)
-
-/* 802.11h */
-#define NETWORK_HAS_POWER_CONSTRAINT    (1<<5)
-#define NETWORK_HAS_CSA                 (1<<6)
-#define NETWORK_HAS_QUIET               (1<<7)
-#define NETWORK_HAS_IBSS_DFS            (1<<8)
-#define NETWORK_HAS_TPC_REPORT          (1<<9)
-
-#define NETWORK_HAS_ERP_VALUE           (1<<10)
-
-#define QOS_QUEUE_NUM                   4
-#define QOS_OUI_LEN                     3
-#define QOS_OUI_TYPE                    2
-#define QOS_ELEMENT_ID                  221
-#define QOS_OUI_INFO_SUB_TYPE           0
-#define QOS_OUI_PARAM_SUB_TYPE          1
-#define QOS_VERSION_1                   1
-#define QOS_AIFSN_MIN_VALUE             2
-
-struct ieee80211_qos_information_element {
-	u8 elementID;
-	u8 length;
-	u8 qui[QOS_OUI_LEN];
-	u8 qui_type;
-	u8 qui_subtype;
-	u8 version;
-	u8 ac_info;
-} __attribute__ ((packed));
-
-struct ieee80211_qos_ac_parameter {
-	u8 aci_aifsn;
-	u8 ecw_min_max;
-	__le16 tx_op_limit;
-} __attribute__ ((packed));
-
-struct ieee80211_qos_parameter_info {
-	struct ieee80211_qos_information_element info_element;
-	u8 reserved;
-	struct ieee80211_qos_ac_parameter ac_params_record[QOS_QUEUE_NUM];
-} __attribute__ ((packed));
-
-struct ieee80211_qos_parameters {
-	__le16 cw_min[QOS_QUEUE_NUM];
-	__le16 cw_max[QOS_QUEUE_NUM];
-	u8 aifs[QOS_QUEUE_NUM];
-	u8 flag[QOS_QUEUE_NUM];
-	__le16 tx_op_limit[QOS_QUEUE_NUM];
-} __attribute__ ((packed));
-
-struct ieee80211_qos_data {
-	struct ieee80211_qos_parameters parameters;
-	int active;
-	int supported;
-	u8 param_count;
-	u8 old_param_count;
-};
-
-struct ieee80211_tim_parameters {
-	u8 tim_count;
-	u8 tim_period;
-} __attribute__ ((packed));
-
-/*******************************************************/
-
-enum {				/* ieee80211_basic_report.map */
-	IEEE80211_BASIC_MAP_BSS = (1 << 0),
-	IEEE80211_BASIC_MAP_OFDM = (1 << 1),
-	IEEE80211_BASIC_MAP_UNIDENTIFIED = (1 << 2),
-	IEEE80211_BASIC_MAP_RADAR = (1 << 3),
-	IEEE80211_BASIC_MAP_UNMEASURED = (1 << 4),
-	/* Bits 5-7 are reserved */
-
-};
-struct ieee80211_basic_report {
-	u8 channel;
-	__le64 start_time;
-	__le16 duration;
-	u8 map;
-} __attribute__ ((packed));
-
-enum {				/* ieee80211_measurement_request.mode */
-	/* Bit 0 is reserved */
-	IEEE80211_MEASUREMENT_ENABLE = (1 << 1),
-	IEEE80211_MEASUREMENT_REQUEST = (1 << 2),
-	IEEE80211_MEASUREMENT_REPORT = (1 << 3),
-	/* Bits 4-7 are reserved */
-};
-
-enum {
-	IEEE80211_REPORT_BASIC = 0,	/* required */
-	IEEE80211_REPORT_CCA = 1,	/* optional */
-	IEEE80211_REPORT_RPI = 2,	/* optional */
-	/* 3-255 reserved */
-};
-
-struct ieee80211_measurement_params {
-	u8 channel;
-	__le64 start_time;
-	__le16 duration;
-} __attribute__ ((packed));
-
-struct ieee80211_measurement_request {
-	struct ieee80211_info_element ie;
-	u8 token;
-	u8 mode;
-	u8 type;
-	struct ieee80211_measurement_params params[0];
-} __attribute__ ((packed));
-
-struct ieee80211_measurement_report {
-	struct ieee80211_info_element ie;
-	u8 token;
-	u8 mode;
-	u8 type;
-	union {
-		struct ieee80211_basic_report basic[0];
-	} u;
-} __attribute__ ((packed));
-
-struct ieee80211_tpc_report {
-	u8 transmit_power;
-	u8 link_margin;
-} __attribute__ ((packed));
-
-struct ieee80211_channel_map {
-	u8 channel;
-	u8 map;
-} __attribute__ ((packed));
-
-struct ieee80211_ibss_dfs {
-	struct ieee80211_info_element ie;
-	u8 owner[ETH_ALEN];
-	u8 recovery_interval;
-	struct ieee80211_channel_map channel_map[0];
-};
-
-struct ieee80211_csa {
-	u8 mode;
-	u8 channel;
-	u8 count;
-} __attribute__ ((packed));
-
-struct ieee80211_quiet {
-	u8 count;
-	u8 period;
-	u8 duration;
-	u8 offset;
-} __attribute__ ((packed));
-
-struct ieee80211_network {
-	/* These entries are used to identify a unique network */
-	u8 bssid[ETH_ALEN];
-	u8 channel;
-	/* Ensure null-terminated for any debug msgs */
-	u8 ssid[IW_ESSID_MAX_SIZE + 1];
-	u8 ssid_len;
-
-	struct ieee80211_qos_data qos_data;
-
-	/* These are network statistics */
-	struct ieee80211_rx_stats stats;
-	u16 capability;
-	u8 rates[MAX_RATES_LENGTH];
-	u8 rates_len;
-	u8 rates_ex[MAX_RATES_EX_LENGTH];
-	u8 rates_ex_len;
-	unsigned long last_scanned;
-	u8 mode;
-	u32 flags;
-	u32 last_associate;
-	u32 time_stamp[2];
-	u16 beacon_interval;
-	u16 listen_interval;
-	u16 atim_window;
-	u8 erp_value;
-	u8 wpa_ie[MAX_WPA_IE_LEN];
-	size_t wpa_ie_len;
-	u8 rsn_ie[MAX_WPA_IE_LEN];
-	size_t rsn_ie_len;
-	struct ieee80211_tim_parameters tim;
-
-	/* 802.11h info */
-
-	/* Power Constraint - mandatory if spctrm mgmt required */
-	u8 power_constraint;
-
-	/* TPC Report - mandatory if spctrm mgmt required */
-	struct ieee80211_tpc_report tpc_report;
-
-	/* IBSS DFS - mandatory if spctrm mgmt required and IBSS
-	 * NOTE: This is variable length and so must be allocated dynamically */
-	struct ieee80211_ibss_dfs *ibss_dfs;
-
-	/* Channel Switch Announcement - optional if spctrm mgmt required */
-	struct ieee80211_csa csa;
-
-	/* Quiet - optional if spctrm mgmt required */
-	struct ieee80211_quiet quiet;
-
-	struct list_head list;
-};
-
-enum ieee80211_state {
-	IEEE80211_UNINITIALIZED = 0,
-	IEEE80211_INITIALIZED,
-	IEEE80211_ASSOCIATING,
-	IEEE80211_ASSOCIATED,
-	IEEE80211_AUTHENTICATING,
-	IEEE80211_AUTHENTICATED,
-	IEEE80211_SHUTDOWN
-};
-
-#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
-#define DEFAULT_FTS 2346
-
-#define CFG_IEEE80211_RESERVE_FCS (1<<0)
-#define CFG_IEEE80211_COMPUTE_FCS (1<<1)
-#define CFG_IEEE80211_RTS (1<<2)
-
-#define IEEE80211_24GHZ_MIN_CHANNEL 1
-#define IEEE80211_24GHZ_MAX_CHANNEL 14
-#define IEEE80211_24GHZ_CHANNELS (IEEE80211_24GHZ_MAX_CHANNEL - \
-				  IEEE80211_24GHZ_MIN_CHANNEL + 1)
-
-#define IEEE80211_52GHZ_MIN_CHANNEL 34
-#define IEEE80211_52GHZ_MAX_CHANNEL 165
-#define IEEE80211_52GHZ_CHANNELS (IEEE80211_52GHZ_MAX_CHANNEL - \
-				  IEEE80211_52GHZ_MIN_CHANNEL + 1)
-
-enum {
-	IEEE80211_CH_PASSIVE_ONLY = (1 << 0),
-	IEEE80211_CH_80211H_RULES = (1 << 1),
-	IEEE80211_CH_B_ONLY = (1 << 2),
-	IEEE80211_CH_NO_IBSS = (1 << 3),
-	IEEE80211_CH_UNIFORM_SPREADING = (1 << 4),
-	IEEE80211_CH_RADAR_DETECT = (1 << 5),
-	IEEE80211_CH_INVALID = (1 << 6),
-};
-
-struct ieee80211_channel {
-	u32 freq;	/* in MHz */
-	u8 channel;
-	u8 flags;
-	u8 max_power;	/* in dBm */
-};
-
-struct ieee80211_geo {
-	u8 name[4];
-	u8 bg_channels;
-	u8 a_channels;
-	struct ieee80211_channel bg[IEEE80211_24GHZ_CHANNELS];
-	struct ieee80211_channel a[IEEE80211_52GHZ_CHANNELS];
-};
-
-struct ieee80211_device {
-	struct net_device *dev;
-	struct ieee80211_security sec;
-
-	/* Bookkeeping structures */
-	struct net_device_stats stats;
-	struct ieee80211_stats ieee_stats;
-
-	struct ieee80211_geo geo;
-
-	/* Probe / Beacon management */
-	struct list_head network_free_list;
-	struct list_head network_list;
-	struct ieee80211_network *networks;
-	int scans;
-	int scan_age;
-
-	int iw_mode;		/* operating mode (IW_MODE_*) */
-	struct iw_spy_data spy_data;	/* iwspy support */
-
-	spinlock_t lock;
-
-	int tx_headroom;	/* Set to size of any additional room needed at front
-				 * of allocated Tx SKBs */
-	u32 config;
-
-	/* WEP and other encryption related settings at the device level */
-	int open_wep;		/* Set to 1 to allow unencrypted frames */
-
-	int reset_on_keychange;	/* Set to 1 if the HW needs to be reset on
-				 * WEP key changes */
-
-	/* If the host performs {en,de}cryption, then set to 1 */
-	int host_encrypt;
-	int host_encrypt_msdu;
-	int host_decrypt;
-	/* host performs multicast decryption */
-	int host_mc_decrypt;
-
-	/* host should strip IV and ICV from protected frames */
-	/* meaningful only when hardware decryption is being used */
-	int host_strip_iv_icv;
-
-	int host_open_frag;
-	int host_build_iv;
-	int ieee802_1x;		/* is IEEE 802.1X used */
-
-	/* WPA data */
-	int wpa_enabled;
-	int drop_unencrypted;
-	int privacy_invoked;
-	size_t wpa_ie_len;
-	u8 *wpa_ie;
-
-	struct lib80211_crypt_info crypt_info;
-
-	int bcrx_sta_key;	/* use individual keys to override default keys even
-				 * with RX of broad/multicast frames */
-
-	/* Fragmentation structures */
-	struct ieee80211_frag_entry frag_cache[IEEE80211_FRAG_CACHE_LEN];
-	unsigned int frag_next_idx;
-	u16 fts;		/* Fragmentation Threshold */
-	u16 rts;		/* RTS threshold */
-
-	/* Association info */
-	u8 bssid[ETH_ALEN];
-
-	enum ieee80211_state state;
-
-	int mode;		/* A, B, G */
-	int modulation;		/* CCK, OFDM */
-	int freq_band;		/* 2.4Ghz, 5.2Ghz, Mixed */
-	int abg_true;		/* ABG flag              */
-
-	int perfect_rssi;
-	int worst_rssi;
-
-	u16 prev_seq_ctl;	/* used to drop duplicate frames */
-
-	/* Callback functions */
-	void (*set_security) (struct net_device * dev,
-			      struct ieee80211_security * sec);
-	int (*hard_start_xmit) (struct ieee80211_txb * txb,
-				struct net_device * dev, int pri);
-	int (*reset_port) (struct net_device * dev);
-	int (*is_queue_full) (struct net_device * dev, int pri);
-
-	int (*handle_management) (struct net_device * dev,
-				  struct ieee80211_network * network, u16 type);
-	int (*is_qos_active) (struct net_device *dev, struct sk_buff *skb);
-
-	/* Typical STA methods */
-	int (*handle_auth) (struct net_device * dev,
-			    struct ieee80211_auth * auth);
-	int (*handle_deauth) (struct net_device * dev,
-			      struct ieee80211_deauth * auth);
-	int (*handle_action) (struct net_device * dev,
-			      struct ieee80211_action * action,
-			      struct ieee80211_rx_stats * stats);
-	int (*handle_disassoc) (struct net_device * dev,
-				struct ieee80211_disassoc * assoc);
-	int (*handle_beacon) (struct net_device * dev,
-			      struct ieee80211_beacon * beacon,
-			      struct ieee80211_network * network);
-	int (*handle_probe_response) (struct net_device * dev,
-				      struct ieee80211_probe_response * resp,
-				      struct ieee80211_network * network);
-	int (*handle_probe_request) (struct net_device * dev,
-				     struct ieee80211_probe_request * req,
-				     struct ieee80211_rx_stats * stats);
-	int (*handle_assoc_response) (struct net_device * dev,
-				      struct ieee80211_assoc_response * resp,
-				      struct ieee80211_network * network);
-
-	/* Typical AP methods */
-	int (*handle_assoc_request) (struct net_device * dev);
-	int (*handle_reassoc_request) (struct net_device * dev,
-				       struct ieee80211_reassoc_request * req);
-
-	/* This must be the last item so that it points to the data
-	 * allocated beyond this structure by alloc_ieee80211 */
-	u8 priv[0];
-};
-
-#define IEEE_A            (1<<0)
-#define IEEE_B            (1<<1)
-#define IEEE_G            (1<<2)
-#define IEEE_MODE_MASK    (IEEE_A|IEEE_B|IEEE_G)
-
-static inline void *ieee80211_priv(struct net_device *dev)
-{
-	return ((struct ieee80211_device *)netdev_priv(dev))->priv;
-}
-
-static inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee,
-					  int mode)
-{
-	/*
-	 * It is possible for both access points and our device to support
-	 * combinations of modes, so as long as there is one valid combination
-	 * of ap/device supported modes, then return success
-	 *
-	 */
-	if ((mode & IEEE_A) &&
-	    (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
-	    (ieee->freq_band & IEEE80211_52GHZ_BAND))
-		return 1;
-
-	if ((mode & IEEE_G) &&
-	    (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
-	    (ieee->freq_band & IEEE80211_24GHZ_BAND))
-		return 1;
-
-	if ((mode & IEEE_B) &&
-	    (ieee->modulation & IEEE80211_CCK_MODULATION) &&
-	    (ieee->freq_band & IEEE80211_24GHZ_BAND))
-		return 1;
-
-	return 0;
-}
-
-static inline int ieee80211_get_hdrlen(u16 fc)
-{
-	int hdrlen = IEEE80211_3ADDR_LEN;
-	u16 stype = WLAN_FC_GET_STYPE(fc);
-
-	switch (WLAN_FC_GET_TYPE(fc)) {
-	case IEEE80211_FTYPE_DATA:
-		if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
-			hdrlen = IEEE80211_4ADDR_LEN;
-		if (stype & IEEE80211_STYPE_QOS_DATA)
-			hdrlen += 2;
-		break;
-	case IEEE80211_FTYPE_CTL:
-		switch (WLAN_FC_GET_STYPE(fc)) {
-		case IEEE80211_STYPE_CTS:
-		case IEEE80211_STYPE_ACK:
-			hdrlen = IEEE80211_1ADDR_LEN;
-			break;
-		default:
-			hdrlen = IEEE80211_2ADDR_LEN;
-			break;
-		}
-		break;
-	}
-
-	return hdrlen;
-}
-
-static inline u8 *ieee80211_get_payload(struct ieee80211_hdr *hdr)
-{
-	switch (ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control))) {
-	case IEEE80211_1ADDR_LEN:
-		return ((struct ieee80211_hdr_1addr *)hdr)->payload;
-	case IEEE80211_2ADDR_LEN:
-		return ((struct ieee80211_hdr_2addr *)hdr)->payload;
-	case IEEE80211_3ADDR_LEN:
-		return ((struct ieee80211_hdr_3addr *)hdr)->payload;
-	case IEEE80211_4ADDR_LEN:
-		return ((struct ieee80211_hdr_4addr *)hdr)->payload;
-	}
-	return NULL;
-}
-
-static inline int ieee80211_is_ofdm_rate(u8 rate)
-{
-	switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
-	case IEEE80211_OFDM_RATE_6MB:
-	case IEEE80211_OFDM_RATE_9MB:
-	case IEEE80211_OFDM_RATE_12MB:
-	case IEEE80211_OFDM_RATE_18MB:
-	case IEEE80211_OFDM_RATE_24MB:
-	case IEEE80211_OFDM_RATE_36MB:
-	case IEEE80211_OFDM_RATE_48MB:
-	case IEEE80211_OFDM_RATE_54MB:
-		return 1;
-	}
-	return 0;
-}
-
-static inline int ieee80211_is_cck_rate(u8 rate)
-{
-	switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
-	case IEEE80211_CCK_RATE_1MB:
-	case IEEE80211_CCK_RATE_2MB:
-	case IEEE80211_CCK_RATE_5MB:
-	case IEEE80211_CCK_RATE_11MB:
-		return 1;
-	}
-	return 0;
-}
-
-/* ieee80211.c */
-extern void free_ieee80211(struct net_device *dev);
-extern struct net_device *alloc_ieee80211(int sizeof_priv);
-
-extern int ieee80211_set_encryption(struct ieee80211_device *ieee);
-
-/* ieee80211_tx.c */
-extern int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev);
-extern void ieee80211_txb_free(struct ieee80211_txb *);
-
-/* ieee80211_rx.c */
-extern void ieee80211_rx_any(struct ieee80211_device *ieee,
-		     struct sk_buff *skb, struct ieee80211_rx_stats *stats);
-extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
-			struct ieee80211_rx_stats *rx_stats);
-/* make sure to set stats->len */
-extern void ieee80211_rx_mgt(struct ieee80211_device *ieee,
-			     struct ieee80211_hdr_4addr *header,
-			     struct ieee80211_rx_stats *stats);
-extern void ieee80211_network_reset(struct ieee80211_network *network);
-
-/* ieee80211_geo.c */
-extern const struct ieee80211_geo *ieee80211_get_geo(struct ieee80211_device
-						     *ieee);
-extern int ieee80211_set_geo(struct ieee80211_device *ieee,
-			     const struct ieee80211_geo *geo);
-
-extern int ieee80211_is_valid_channel(struct ieee80211_device *ieee,
-				      u8 channel);
-extern int ieee80211_channel_to_index(struct ieee80211_device *ieee,
-				      u8 channel);
-extern u8 ieee80211_freq_to_channel(struct ieee80211_device *ieee, u32 freq);
-extern u8 ieee80211_get_channel_flags(struct ieee80211_device *ieee,
-				      u8 channel);
-extern const struct ieee80211_channel *ieee80211_get_channel(struct
-							     ieee80211_device
-							     *ieee, u8 channel);
-extern u32 ieee80211_channel_to_freq(struct ieee80211_device * ieee,
-				      u8 channel);
-
-/* ieee80211_wx.c */
-extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *key);
-extern int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
-				   struct iw_request_info *info,
-				   union iwreq_data *wrqu, char *key);
-extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
-				   struct iw_request_info *info,
-				   union iwreq_data *wrqu, char *key);
-extern int ieee80211_wx_set_encodeext(struct ieee80211_device *ieee,
-				      struct iw_request_info *info,
-				      union iwreq_data *wrqu, char *extra);
-extern int ieee80211_wx_get_encodeext(struct ieee80211_device *ieee,
-				      struct iw_request_info *info,
-				      union iwreq_data *wrqu, char *extra);
-
-static inline void ieee80211_increment_scans(struct ieee80211_device *ieee)
-{
-	ieee->scans++;
-}
-
-static inline int ieee80211_get_scans(struct ieee80211_device *ieee)
-{
-	return ieee->scans;
-}
-
-#endif				/* IEEE80211_H */
diff --git a/include/net/if_inet6.h b/include/net/if_inet6.h
index c8effa4b1fe..38b78132019 100644
--- a/include/net/if_inet6.h
+++ b/include/net/if_inet6.h
@@ -39,8 +39,6 @@ struct inet6_ifaddr
 	
 	__u32			valid_lft;
 	__u32			prefered_lft;
-	unsigned long		cstamp;	/* created timestamp */
-	unsigned long		tstamp; /* updated timestamp */
 	atomic_t		refcnt;
 	spinlock_t		lock;
 
@@ -49,6 +47,9 @@ struct inet6_ifaddr
 
 	__u16			scope;
 
+	unsigned long		cstamp;	/* created timestamp */
+	unsigned long		tstamp; /* updated timestamp */
+
 	struct timer_list	timer;
 
 	struct inet6_dev	*idev;
diff --git a/include/net/inet_ecn.h b/include/net/inet_ecn.h
index 7040a782c65..9b5d08f4f6e 100644
--- a/include/net/inet_ecn.h
+++ b/include/net/inet_ecn.h
@@ -113,12 +113,12 @@ static inline void ipv6_copy_dscp(unsigned int dscp, struct ipv6hdr *inner)
 static inline int INET_ECN_set_ce(struct sk_buff *skb)
 {
 	switch (skb->protocol) {
-	case __constant_htons(ETH_P_IP):
+	case cpu_to_be16(ETH_P_IP):
 		if (skb->network_header + sizeof(struct iphdr) <= skb->tail)
 			return IP_ECN_set_ce(ip_hdr(skb));
 		break;
 
-	case __constant_htons(ETH_P_IPV6):
+	case cpu_to_be16(ETH_P_IPV6):
 		if (skb->network_header + sizeof(struct ipv6hdr) <= skb->tail)
 			return IP6_ECN_set_ce(ipv6_hdr(skb));
 		break;
diff --git a/include/net/inet_frag.h b/include/net/inet_frag.h
index e081eefd6f4..39f2dc94390 100644
--- a/include/net/inet_frag.h
+++ b/include/net/inet_frag.h
@@ -61,7 +61,8 @@ void inet_frag_destroy(struct inet_frag_queue *q,
 				struct inet_frags *f, int *work);
 int inet_frag_evictor(struct netns_frags *nf, struct inet_frags *f);
 struct inet_frag_queue *inet_frag_find(struct netns_frags *nf,
-		struct inet_frags *f, void *key, unsigned int hash);
+		struct inet_frags *f, void *key, unsigned int hash)
+	__releases(&f->lock);
 
 static inline void inet_frag_put(struct inet_frag_queue *q, struct inet_frags *f)
 {
diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h
index d0a043153cc..a44e2248b2e 100644
--- a/include/net/inet_hashtables.h
+++ b/include/net/inet_hashtables.h
@@ -82,6 +82,7 @@ struct inet_bind_bucket {
 #endif
 	unsigned short		port;
 	signed short		fastreuse;
+	int			num_owners;
 	struct hlist_node	node;
 	struct hlist_head	owners;
 };
@@ -133,7 +134,7 @@ struct inet_hashinfo {
 	struct inet_bind_hashbucket	*bhash;
 
 	unsigned int			bhash_size;
-	/* Note : 4 bytes padding on 64 bit arches */
+	/* 4 bytes hole on 64 bit */
 
 	struct kmem_cache		*bind_bucket_cachep;
 
@@ -150,6 +151,7 @@ struct inet_hashinfo {
 	struct inet_listen_hashbucket	listening_hash[INET_LHTABLE_SIZE]
 					____cacheline_aligned_in_smp;
 
+	atomic_t			bsockets;
 };
 
 static inline struct inet_ehash_bucket *inet_ehash_bucket(
diff --git a/include/net/ip.h b/include/net/ip.h
index 10868139e65..4ac7577f98d 100644
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -55,6 +55,7 @@ struct ipcm_cookie
 	__be32			addr;
 	int			oif;
 	struct ip_options	*opt;
+	union skb_shared_tx	shtx;
 };
 
 #define IPCB(skb) ((struct inet_skb_parm*)((skb)->cb))
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index ab9b003ab67..bbae1e87efc 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -184,8 +184,8 @@ static inline const char *ip_vs_dbg_addr(int af, char *buf, size_t buf_len,
 /*
  *      The port number of FTP service (in network order).
  */
-#define FTPPORT  __constant_htons(21)
-#define FTPDATA  __constant_htons(20)
+#define FTPPORT  cpu_to_be16(21)
+#define FTPDATA  cpu_to_be16(20)
 
 /*
  *      TCP State Values
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index 6d5b58a1c74..c1f16fc49ad 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -196,8 +196,8 @@ struct ip6_flowlabel
 	struct net		*fl_net;
 };
 
-#define IPV6_FLOWINFO_MASK	__constant_htonl(0x0FFFFFFF)
-#define IPV6_FLOWLABEL_MASK	__constant_htonl(0x000FFFFF)
+#define IPV6_FLOWINFO_MASK	cpu_to_be32(0x0FFFFFFF)
+#define IPV6_FLOWLABEL_MASK	cpu_to_be32(0x000FFFFF)
 
 struct ipv6_fl_socklist
 {
diff --git a/include/net/ipx.h b/include/net/ipx.h
index 4cc0b4eca94..a14121dd193 100644
--- a/include/net/ipx.h
+++ b/include/net/ipx.h
@@ -27,7 +27,7 @@ struct ipx_address {
 
 struct ipxhdr {
 	__be16			ipx_checksum __attribute__ ((packed));
-#define IPX_NO_CHECKSUM	__constant_htons(0xFFFF)
+#define IPX_NO_CHECKSUM	cpu_to_be16(0xFFFF)
 	__be16			ipx_pktsize __attribute__ ((packed));
 	__u8			ipx_tctrl;
 	__u8			ipx_type;
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 559422fc094..12a52efcd0d 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -207,7 +207,7 @@ struct ieee80211_bss_conf {
 	u16 beacon_int;
 	u16 assoc_capability;
 	u64 timestamp;
-	u64 basic_rates;
+	u32 basic_rates;
 	struct ieee80211_bss_ht_conf ht;
 };
 
@@ -262,6 +262,26 @@ enum mac80211_tx_control_flags {
 	IEEE80211_TX_CTL_RATE_CTRL_PROBE	= BIT(12),
 };
 
+/**
+ * enum mac80211_rate_control_flags - per-rate flags set by the
+ *	Rate Control algorithm.
+ *
+ * These flags are set by the Rate control algorithm for each rate during tx,
+ * in the @flags member of struct ieee80211_tx_rate.
+ *
+ * @IEEE80211_TX_RC_USE_RTS_CTS: Use RTS/CTS exchange for this rate.
+ * @IEEE80211_TX_RC_USE_CTS_PROTECT: CTS-to-self protection is required.
+ *	This is set if the current BSS requires ERP protection.
+ * @IEEE80211_TX_RC_USE_SHORT_PREAMBLE: Use short preamble.
+ * @IEEE80211_TX_RC_MCS: HT rate.
+ * @IEEE80211_TX_RC_GREEN_FIELD: Indicates whether this rate should be used in
+ *	Greenfield mode.
+ * @IEEE80211_TX_RC_40_MHZ_WIDTH: Indicates if the Channel Width should be 40 MHz.
+ * @IEEE80211_TX_RC_DUP_DATA: The frame should be transmitted on both of the
+ *	adjacent 20 MHz channels, if the current channel type is
+ *	NL80211_CHAN_HT40MINUS or NL80211_CHAN_HT40PLUS.
+ * @IEEE80211_TX_RC_SHORT_GI: Short Guard interval should be used for this rate.
+ */
 enum mac80211_rate_control_flags {
 	IEEE80211_TX_RC_USE_RTS_CTS		= BIT(0),
 	IEEE80211_TX_RC_USE_CTS_PROTECT		= BIT(1),
@@ -507,11 +527,6 @@ static inline int __deprecated __IEEE80211_CONF_SHORT_SLOT_TIME(void)
 }
 #define IEEE80211_CONF_SHORT_SLOT_TIME (__IEEE80211_CONF_SHORT_SLOT_TIME())
 
-struct ieee80211_ht_conf {
-	bool enabled;
-	enum nl80211_channel_type channel_type;
-};
-
 /**
  * enum ieee80211_conf_changed - denotes which configuration changed
  *
@@ -520,10 +535,10 @@ struct ieee80211_ht_conf {
  * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed
  * @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed
  * @IEEE80211_CONF_CHANGE_PS: the PS flag changed
+ * @IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT: the dynamic PS timeout changed
  * @IEEE80211_CONF_CHANGE_POWER: the TX power changed
- * @IEEE80211_CONF_CHANGE_CHANNEL: the channel changed
+ * @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed
  * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed
- * @IEEE80211_CONF_CHANGE_HT: HT configuration changed
  */
 enum ieee80211_conf_changed {
 	IEEE80211_CONF_CHANGE_RADIO_ENABLED	= BIT(0),
@@ -531,10 +546,10 @@ enum ieee80211_conf_changed {
 	IEEE80211_CONF_CHANGE_LISTEN_INTERVAL	= BIT(2),
 	IEEE80211_CONF_CHANGE_RADIOTAP		= BIT(3),
 	IEEE80211_CONF_CHANGE_PS		= BIT(4),
-	IEEE80211_CONF_CHANGE_POWER		= BIT(5),
-	IEEE80211_CONF_CHANGE_CHANNEL		= BIT(6),
-	IEEE80211_CONF_CHANGE_RETRY_LIMITS	= BIT(7),
-	IEEE80211_CONF_CHANGE_HT		= BIT(8),
+	IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT	= BIT(5),
+	IEEE80211_CONF_CHANGE_POWER		= BIT(6),
+	IEEE80211_CONF_CHANGE_CHANNEL		= BIT(7),
+	IEEE80211_CONF_CHANGE_RETRY_LIMITS	= BIT(8),
 };
 
 /**
@@ -547,8 +562,9 @@ enum ieee80211_conf_changed {
  * @listen_interval: listen interval in units of beacon interval
  * @flags: configuration flags defined above
  * @power_level: requested transmit power (in dBm)
+ * @dynamic_ps_timeout: dynamic powersave timeout (in ms)
  * @channel: the channel to tune to
- * @ht: the HT configuration for the device
+ * @channel_type: the channel (HT) type
  * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame
  *    (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11,
  *    but actually means the number of transmissions not the number of retries
@@ -559,7 +575,7 @@ enum ieee80211_conf_changed {
 struct ieee80211_conf {
 	int beacon_int;
 	u32 flags;
-	int power_level;
+	int power_level, dynamic_ps_timeout;
 
 	u16 listen_interval;
 	bool radio_enabled;
@@ -567,7 +583,7 @@ struct ieee80211_conf {
 	u8 long_frame_max_tx_count, short_frame_max_tx_count;
 
 	struct ieee80211_channel *channel;
-	struct ieee80211_ht_conf ht;
+	enum nl80211_channel_type channel_type;
 };
 
 /**
@@ -630,10 +646,12 @@ struct ieee80211_if_init_conf {
  * @IEEE80211_IFCC_BSSID: The BSSID changed.
  * @IEEE80211_IFCC_BEACON: The beacon for this interface changed
  *	(currently AP and MESH only), use ieee80211_beacon_get().
+ * @IEEE80211_IFCC_BEACON_ENABLED: The enable_beacon value changed.
  */
 enum ieee80211_if_conf_change {
-	IEEE80211_IFCC_BSSID	= BIT(0),
-	IEEE80211_IFCC_BEACON	= BIT(1),
+	IEEE80211_IFCC_BSSID		= BIT(0),
+	IEEE80211_IFCC_BEACON		= BIT(1),
+	IEEE80211_IFCC_BEACON_ENABLED	= BIT(2),
 };
 
 /**
@@ -641,13 +659,16 @@ enum ieee80211_if_conf_change {
  *
  * @changed: parameters that have changed, see &enum ieee80211_if_conf_change.
  * @bssid: BSSID of the network we are associated to/creating.
+ * @enable_beacon: Indicates whether beacons can be sent.
+ *	This is valid only for AP/IBSS/MESH modes.
  *
  * This structure is passed to the config_interface() callback of
  * &struct ieee80211_hw.
  */
 struct ieee80211_if_conf {
 	u32 changed;
-	u8 *bssid;
+	const u8 *bssid;
+	bool enable_beacon;
 };
 
 /**
@@ -655,11 +676,13 @@ struct ieee80211_if_conf {
  * @ALG_WEP: WEP40 or WEP104
  * @ALG_TKIP: TKIP
  * @ALG_CCMP: CCMP (AES)
+ * @ALG_AES_CMAC: AES-128-CMAC
  */
 enum ieee80211_key_alg {
 	ALG_WEP,
 	ALG_TKIP,
 	ALG_CCMP,
+	ALG_AES_CMAC,
 };
 
 /**
@@ -688,12 +711,16 @@ enum ieee80211_key_len {
  *	generation in software.
  * @IEEE80211_KEY_FLAG_PAIRWISE: Set by mac80211, this flag indicates
  *	that the key is pairwise rather then a shared key.
+ * @IEEE80211_KEY_FLAG_SW_MGMT: This flag should be set by the driver for a
+ *	CCMP key if it requires CCMP encryption of management frames (MFP) to
+ *	be done in software.
  */
 enum ieee80211_key_flags {
 	IEEE80211_KEY_FLAG_WMM_STA	= 1<<0,
 	IEEE80211_KEY_FLAG_GENERATE_IV	= 1<<1,
 	IEEE80211_KEY_FLAG_GENERATE_MMIC= 1<<2,
 	IEEE80211_KEY_FLAG_PAIRWISE	= 1<<3,
+	IEEE80211_KEY_FLAG_SW_MGMT	= 1<<4,
 };
 
 /**
@@ -714,8 +741,8 @@ enum ieee80211_key_flags {
  * 	- Temporal Encryption Key (128 bits)
  * 	- Temporal Authenticator Tx MIC Key (64 bits)
  * 	- Temporal Authenticator Rx MIC Key (64 bits)
- * @icv_len: FIXME
- * @iv_len: FIXME
+ * @icv_len: The ICV length for this key type
+ * @iv_len: The IV length for this key type
  */
 struct ieee80211_key_conf {
 	enum ieee80211_key_alg alg;
@@ -759,7 +786,7 @@ enum set_key_cmd {
  *	sizeof(void *), size is determined in hw information.
  */
 struct ieee80211_sta {
-	u64 supp_rates[IEEE80211_NUM_BANDS];
+	u32 supp_rates[IEEE80211_NUM_BANDS];
 	u8 addr[ETH_ALEN];
 	u16 aid;
 	struct ieee80211_sta_ht_cap ht_cap;
@@ -833,11 +860,6 @@ enum ieee80211_tkip_key_type {
  *	expect values between 0 and @max_signal.
  *	If possible please provide dB or dBm instead.
  *
- * @IEEE80211_HW_SIGNAL_DB:
- *	Hardware gives signal values in dB, decibel difference from an
- *	arbitrary, fixed reference. We expect values between 0 and @max_signal.
- *	If possible please provide dBm instead.
- *
  * @IEEE80211_HW_SIGNAL_DBM:
  *	Hardware gives signal values in dBm, decibel difference from
  *	one milliwatt. This is the preferred method since it is standardized
@@ -854,10 +876,18 @@ enum ieee80211_tkip_key_type {
  * @IEEE80211_HW_AMPDU_AGGREGATION:
  *	Hardware supports 11n A-MPDU aggregation.
  *
- * @IEEE80211_HW_NO_STACK_DYNAMIC_PS:
- *	Hardware which has dynamic power save support, meaning
- *	that power save is enabled in idle periods, and don't need support
- *	from stack.
+ * @IEEE80211_HW_SUPPORTS_PS:
+ *	Hardware has power save support (i.e. can go to sleep).
+ *
+ * @IEEE80211_HW_PS_NULLFUNC_STACK:
+ *	Hardware requires nullfunc frame handling in stack, implies
+ *	stack support for dynamic PS.
+ *
+ * @IEEE80211_HW_SUPPORTS_DYNAMIC_PS:
+ *	Hardware has support for dynamic PS.
+ *
+ * @IEEE80211_HW_MFP_CAPABLE:
+ *	Hardware supports management frame protection (MFP, IEEE 802.11w).
  */
 enum ieee80211_hw_flags {
 	IEEE80211_HW_RX_INCLUDES_FCS			= 1<<1,
@@ -865,12 +895,14 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE		= 1<<3,
 	IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE	= 1<<4,
 	IEEE80211_HW_SIGNAL_UNSPEC			= 1<<5,
-	IEEE80211_HW_SIGNAL_DB				= 1<<6,
-	IEEE80211_HW_SIGNAL_DBM				= 1<<7,
-	IEEE80211_HW_NOISE_DBM				= 1<<8,
-	IEEE80211_HW_SPECTRUM_MGMT			= 1<<9,
-	IEEE80211_HW_AMPDU_AGGREGATION			= 1<<10,
-	IEEE80211_HW_NO_STACK_DYNAMIC_PS		= 1<<11,
+	IEEE80211_HW_SIGNAL_DBM				= 1<<6,
+	IEEE80211_HW_NOISE_DBM				= 1<<7,
+	IEEE80211_HW_SPECTRUM_MGMT			= 1<<8,
+	IEEE80211_HW_AMPDU_AGGREGATION			= 1<<9,
+	IEEE80211_HW_SUPPORTS_PS			= 1<<10,
+	IEEE80211_HW_PS_NULLFUNC_STACK			= 1<<11,
+	IEEE80211_HW_SUPPORTS_DYNAMIC_PS		= 1<<12,
+	IEEE80211_HW_MFP_CAPABLE			= 1<<13,
 };
 
 /**
@@ -890,9 +922,8 @@ enum ieee80211_hw_flags {
  * @workqueue: single threaded workqueue available for driver use,
  *	allocated by mac80211 on registration and flushed when an
  *	interface is removed.
- *	NOTICE: All work performed on this workqueue should NEVER
- *	acquire the RTNL lock (i.e. Don't use the function
- *	ieee80211_iterate_active_interfaces())
+ *	NOTICE: All work performed on this workqueue must not
+ *	acquire the RTNL lock.
  *
  * @priv: pointer to private area that was allocated for driver use
  *	along with this structure.
@@ -952,6 +983,19 @@ struct ieee80211_hw {
 };
 
 /**
+ * wiphy_to_ieee80211_hw - return a mac80211 driver hw struct from a wiphy
+ *
+ * @wiphy: the &struct wiphy which we want to query
+ *
+ * mac80211 drivers can use this to get to their respective
+ * &struct ieee80211_hw. Drivers wishing to get to their own private
+ * structure can then access it via hw->priv. Note that mac802111 drivers should
+ * not use wiphy_priv() to try to get their private driver structure as this
+ * is already used internally by mac80211.
+ */
+struct ieee80211_hw *wiphy_to_ieee80211_hw(struct wiphy *wiphy);
+
+/**
  * SET_IEEE80211_DEV - set device for 802.11 hardware
  *
  * @hw: the &struct ieee80211_hw to set the device for
@@ -978,11 +1022,6 @@ static inline int ieee80211_num_regular_queues(struct ieee80211_hw *hw)
 	return hw->queues;
 }
 
-static inline int ieee80211_num_queues(struct ieee80211_hw *hw)
-{
-	return hw->queues + hw->ampdu_queues;
-}
-
 static inline struct ieee80211_rate *
 ieee80211_get_tx_rate(const struct ieee80211_hw *hw,
 		      const struct ieee80211_tx_info *c)
@@ -1018,16 +1057,12 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
  *
  * The set_key() callback in the &struct ieee80211_ops for a given
  * device is called to enable hardware acceleration of encryption and
- * decryption. The callback takes an @address parameter that will be
- * the broadcast address for default keys, the other station's hardware
- * address for individual keys or the zero address for keys that will
- * be used only for transmission.
+ * decryption. The callback takes a @sta parameter that will be NULL
+ * for default keys or keys used for transmission only, or point to
+ * the station information for the peer for individual keys.
  * Multiple transmission keys with the same key index may be used when
  * VLANs are configured for an access point.
  *
- * The @local_address parameter will always be set to our own address,
- * this is only relevant if you support multiple local addresses.
- *
  * When transmitting, the TX control data will use the @hw_key_idx
  * selected by the driver by modifying the &struct ieee80211_key_conf
  * pointed to by the @key parameter to the set_key() function.
@@ -1061,6 +1096,42 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
  */
 
 /**
+ * DOC: Powersave support
+ *
+ * mac80211 has support for various powersave implementations.
+ *
+ * First, it can support hardware that handles all powersaving by
+ * itself, such hardware should simply set the %IEEE80211_HW_SUPPORTS_PS
+ * hardware flag. In that case, it will be told about the desired
+ * powersave mode depending on the association status, and the driver
+ * must take care of sending nullfunc frames when necessary, i.e. when
+ * entering and leaving powersave mode. The driver is required to look at
+ * the AID in beacons and signal to the AP that it woke up when it finds
+ * traffic directed to it. This mode supports dynamic PS by simply
+ * enabling/disabling PS.
+ *
+ * Additionally, such hardware may set the %IEEE80211_HW_SUPPORTS_DYNAMIC_PS
+ * flag to indicate that it can support dynamic PS mode itself (see below).
+ *
+ * Other hardware designs cannot send nullfunc frames by themselves and also
+ * need software support for parsing the TIM bitmap. This is also supported
+ * by mac80211 by combining the %IEEE80211_HW_SUPPORTS_PS and
+ * %IEEE80211_HW_PS_NULLFUNC_STACK flags. The hardware is of course still
+ * required to pass up beacons. Additionally, in this case, mac80211 will
+ * wake up the hardware when multicast traffic is announced in the beacon.
+ *
+ * FIXME: I don't think we can be fast enough in software when we want to
+ *	  receive multicast traffic?
+ *
+ * Dynamic powersave mode is an extension to normal powersave mode in which
+ * the hardware stays awake for a user-specified period of time after sending
+ * a frame so that reply frames need not be buffered and therefore delayed
+ * to the next wakeup. This can either be supported by hardware, in which case
+ * the driver needs to look at the @dynamic_ps_timeout hardware configuration
+ * value, or by the stack if all nullfunc handling is in the stack.
+ */
+
+/**
  * DOC: Frame filtering
  *
  * mac80211 requires to see many management frames for proper
@@ -1172,6 +1243,8 @@ enum ieee80211_ampdu_mlme_action {
  *	configuration in the TX control data. This handler should,
  *	preferably, never fail and stop queues appropriately, more
  *	importantly, however, it must never fail for A-MPDU-queues.
+ *	This function should return NETDEV_TX_OK except in very
+ *	limited cases.
  *	Must be implemented and atomic.
  *
  * @start: Called before the first netdevice attached to the hardware
@@ -1212,9 +1285,12 @@ enum ieee80211_ampdu_mlme_action {
  *
  * @config: Handler for configuration requests. IEEE 802.11 code calls this
  *	function to change hardware configuration, e.g., channel.
+ *	This function should never fail but returns a negative error code
+ *	if it does.
  *
  * @config_interface: Handler for configuration requests related to interfaces
  *	(e.g. BSSID changes.)
+ *	Returns a negative error code which will be seen in userspace.
  *
  * @bss_info_changed: Handler for configuration requests related to BSS
  *	parameters that may vary during BSS's lifespan, and may affect low
@@ -1232,8 +1308,9 @@ enum ieee80211_ampdu_mlme_action {
  *
  * @set_key: See the section "Hardware crypto acceleration"
  *	This callback can sleep, and is only called between add_interface
- *	and remove_interface calls, i.e. while the interface with the
- *	given local_address is enabled.
+ *	and remove_interface calls, i.e. while the given virtual interface
+ *	is enabled.
+ *	Returns a negative error code if the key can't be added.
  *
  * @update_tkip_key: See the section "Hardware crypto acceleration"
  * 	This callback will be called in the context of Rx. Called for drivers
@@ -1245,8 +1322,16 @@ enum ieee80211_ampdu_mlme_action {
  *	bands. When the scan finishes, ieee80211_scan_completed() must be
  *	called; note that it also must be called when the scan cannot finish
  *	because the hardware is turned off! Anything else is a bug!
+ *	Returns a negative error code which will be seen in userspace.
+ *
+ * @sw_scan_start: Notifier function that is called just before a software scan
+ *	is started. Can be NULL, if the driver doesn't need this notification.
  *
- * @get_stats: return low-level statistics
+ * @sw_scan_complete: Notifier function that is called just after a software scan
+ *	finished. Can be NULL, if the driver doesn't need this notification.
+ *
+ * @get_stats: Return low-level statistics.
+ * 	Returns zero if statistics are available.
  *
  * @get_tkip_seq: If your device implements TKIP encryption in hardware this
  *	callback should be provided to read the TKIP transmit IVs (both IV32
@@ -1260,6 +1345,7 @@ enum ieee80211_ampdu_mlme_action {
  *
  * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max),
  *	bursting) for a hardware TX queue.
+ *	Returns a negative error code on failure.
  *
  * @get_tx_stats: Get statistics of the current TX queue status. This is used
  *	to get number of currently queued packets (queue length), maximum queue
@@ -1268,8 +1354,12 @@ enum ieee80211_ampdu_mlme_action {
  *	hw->ampdu_queues items.
  *
  * @get_tsf: Get the current TSF timer value from firmware/hardware. Currently,
- *	this is only used for IBSS mode debugging and, as such, is not a
- *	required function. Must be atomic.
+ *	this is only used for IBSS mode BSSID merging and debugging. Is not a
+ *	required function.
+ *
+ * @set_tsf: Set the TSF timer to the specified value in the firmware/hardware.
+ *      Currently, this is only used for IBSS mode debugging. Is not a
+ *	required function.
  *
  * @reset_tsf: Reset the TSF timer and allow firmware/hardware to synchronize
  *	with other STAs in the IBSS. This is only used in IBSS mode. This
@@ -1279,13 +1369,15 @@ enum ieee80211_ampdu_mlme_action {
  * @tx_last_beacon: Determine whether the last IBSS beacon was sent by us.
  *	This is needed only for IBSS mode and the result of this function is
  *	used to determine whether to reply to Probe Requests.
+ *	Returns non-zero if this device sent the last beacon.
  *
  * @ampdu_action: Perform a certain A-MPDU action
  * 	The RA/TID combination determines the destination and TID we want
  * 	the ampdu action to be performed for. The action is defined through
  * 	ieee80211_ampdu_mlme_action. Starting sequence number (@ssn)
- * 	is the first frame we expect to perform the action on. notice
+ * 	is the first frame we expect to perform the action on. Notice
  * 	that TX/RX_STOP can pass NULL for this parameter.
+ *	Returns a negative error code on failure.
  */
 struct ieee80211_ops {
 	int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
@@ -1310,12 +1402,15 @@ struct ieee80211_ops {
 	int (*set_tim)(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
 		       bool set);
 	int (*set_key)(struct ieee80211_hw *hw, enum set_key_cmd cmd,
-		       const u8 *local_address, const u8 *address,
+		       struct ieee80211_vif *vif, struct ieee80211_sta *sta,
 		       struct ieee80211_key_conf *key);
 	void (*update_tkip_key)(struct ieee80211_hw *hw,
 			struct ieee80211_key_conf *conf, const u8 *address,
 			u32 iv32, u16 *phase1key);
-	int (*hw_scan)(struct ieee80211_hw *hw, u8 *ssid, size_t len);
+	int (*hw_scan)(struct ieee80211_hw *hw,
+		       struct cfg80211_scan_request *req);
+	void (*sw_scan_start)(struct ieee80211_hw *hw);
+	void (*sw_scan_complete)(struct ieee80211_hw *hw);
 	int (*get_stats)(struct ieee80211_hw *hw,
 			 struct ieee80211_low_level_stats *stats);
 	void (*get_tkip_seq)(struct ieee80211_hw *hw, u8 hw_key_idx,
@@ -1328,6 +1423,7 @@ struct ieee80211_ops {
 	int (*get_tx_stats)(struct ieee80211_hw *hw,
 			    struct ieee80211_tx_queue_stats *stats);
 	u64 (*get_tsf)(struct ieee80211_hw *hw);
+	void (*set_tsf)(struct ieee80211_hw *hw, u64 tsf);
 	void (*reset_tsf)(struct ieee80211_hw *hw);
 	int (*tx_last_beacon)(struct ieee80211_hw *hw);
 	int (*ampdu_action)(struct ieee80211_hw *hw,
@@ -1752,8 +1848,9 @@ void ieee80211_wake_queues(struct ieee80211_hw *hw);
  * mac80211 that the scan finished.
  *
  * @hw: the hardware that finished the scan
+ * @aborted: set to true if scan was aborted
  */
-void ieee80211_scan_completed(struct ieee80211_hw *hw);
+void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted);
 
 /**
  * ieee80211_iterate_active_interfaces - iterate active interfaces
@@ -1886,6 +1983,16 @@ struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_hw *hw,
 /* Rate control API */
 
 /**
+ * enum rate_control_changed - flags to indicate which parameter changed
+ *
+ * @IEEE80211_RC_HT_CHANGED: The HT parameters of the operating channel have
+ *	changed, rate control algorithm can update its internal state if needed.
+ */
+enum rate_control_changed {
+	IEEE80211_RC_HT_CHANGED = BIT(0)
+};
+
+/**
  * struct ieee80211_tx_rate_control - rate control information for/from RC algo
  *
  * @hw: The hardware the algorithm is invoked for.
@@ -1921,6 +2028,9 @@ struct rate_control_ops {
 	void *(*alloc_sta)(void *priv, struct ieee80211_sta *sta, gfp_t gfp);
 	void (*rate_init)(void *priv, struct ieee80211_supported_band *sband,
 			  struct ieee80211_sta *sta, void *priv_sta);
+	void (*rate_update)(void *priv, struct ieee80211_supported_band *sband,
+			    struct ieee80211_sta *sta,
+			    void *priv_sta, u32 changed);
 	void (*free_sta)(void *priv, struct ieee80211_sta *sta,
 			 void *priv_sta);
 
@@ -1962,4 +2072,34 @@ rate_lowest_index(struct ieee80211_supported_band *sband,
 int ieee80211_rate_control_register(struct rate_control_ops *ops);
 void ieee80211_rate_control_unregister(struct rate_control_ops *ops);
 
+static inline bool
+conf_is_ht20(struct ieee80211_conf *conf)
+{
+	return conf->channel_type == NL80211_CHAN_HT20;
+}
+
+static inline bool
+conf_is_ht40_minus(struct ieee80211_conf *conf)
+{
+	return conf->channel_type == NL80211_CHAN_HT40MINUS;
+}
+
+static inline bool
+conf_is_ht40_plus(struct ieee80211_conf *conf)
+{
+	return conf->channel_type == NL80211_CHAN_HT40PLUS;
+}
+
+static inline bool
+conf_is_ht40(struct ieee80211_conf *conf)
+{
+	return conf_is_ht40_minus(conf) || conf_is_ht40_plus(conf);
+}
+
+static inline bool
+conf_is_ht(struct ieee80211_conf *conf)
+{
+	return conf->channel_type != NL80211_CHAN_NO_HT;
+}
+
 #endif /* MAC80211_H */
diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h
index 2e0c53641cb..4dfb793c3f1 100644
--- a/include/net/netfilter/nf_conntrack.h
+++ b/include/net/netfilter/nf_conntrack.h
@@ -287,7 +287,7 @@ static inline int nf_ct_is_untracked(const struct sk_buff *skb)
 
 extern int nf_conntrack_set_hashsize(const char *val, struct kernel_param *kp);
 extern unsigned int nf_conntrack_htable_size;
-extern int nf_conntrack_max;
+extern unsigned int nf_conntrack_max;
 
 #define NF_CT_STAT_INC(net, count)	\
 	(per_cpu_ptr((net)->ct.stat, raw_smp_processor_id())->count++)
diff --git a/include/net/netfilter/nf_conntrack_l4proto.h b/include/net/netfilter/nf_conntrack_l4proto.h
index debdaf75cec..b01070bf2f8 100644
--- a/include/net/netfilter/nf_conntrack_l4proto.h
+++ b/include/net/netfilter/nf_conntrack_l4proto.h
@@ -90,10 +90,7 @@ struct nf_conntrack_l4proto
 	struct module *me;
 };
 
-/* Existing built-in protocols */
-extern struct nf_conntrack_l4proto nf_conntrack_l4proto_tcp6;
-extern struct nf_conntrack_l4proto nf_conntrack_l4proto_udp4;
-extern struct nf_conntrack_l4proto nf_conntrack_l4proto_udp6;
+/* Existing built-in generic protocol */
 extern struct nf_conntrack_l4proto nf_conntrack_l4proto_generic;
 
 #define MAX_NF_CT_PROTO 256
@@ -101,11 +98,6 @@ extern struct nf_conntrack_l4proto nf_conntrack_l4proto_generic;
 extern struct nf_conntrack_l4proto *
 __nf_ct_l4proto_find(u_int16_t l3proto, u_int8_t l4proto);
 
-extern struct nf_conntrack_l4proto *
-nf_ct_l4proto_find_get(u_int16_t l3proto, u_int8_t protocol);
-
-extern void nf_ct_l4proto_put(struct nf_conntrack_l4proto *p);
-
 /* Protocol registration. */
 extern int nf_conntrack_l4proto_register(struct nf_conntrack_l4proto *proto);
 extern void nf_conntrack_l4proto_unregister(struct nf_conntrack_l4proto *proto);
diff --git a/include/net/netfilter/nf_log.h b/include/net/netfilter/nf_log.h
index 7182c06974f..920997f1aff 100644
--- a/include/net/netfilter/nf_log.h
+++ b/include/net/netfilter/nf_log.h
@@ -1,6 +1,8 @@
 #ifndef _NF_LOG_H
 #define _NF_LOG_H
 
+#include <linux/netfilter.h>
+
 /* those NF_LOG_* defines and struct nf_loginfo are legacy definitios that will
  * disappear once iptables is replaced with pkttables.  Please DO NOT use them
  * for any new code! */
@@ -40,12 +42,15 @@ struct nf_logger {
 	struct module	*me;
 	nf_logfn 	*logfn;
 	char		*name;
+	struct list_head	list[NFPROTO_NUMPROTO];
 };
 
 /* Function to register/unregister log function. */
-int nf_log_register(u_int8_t pf, const struct nf_logger *logger);
-void nf_log_unregister(const struct nf_logger *logger);
-void nf_log_unregister_pf(u_int8_t pf);
+int nf_log_register(u_int8_t pf, struct nf_logger *logger);
+void nf_log_unregister(struct nf_logger *logger);
+
+int nf_log_bind_pf(u_int8_t pf, const struct nf_logger *logger);
+void nf_log_unbind_pf(u_int8_t pf);
 
 /* Calls the registered backend logging function */
 void nf_log_packet(u_int8_t pf,
diff --git a/include/net/netns/ipv4.h b/include/net/netns/ipv4.h
index 977f482d97a..2eb3814d625 100644
--- a/include/net/netns/ipv4.h
+++ b/include/net/netns/ipv4.h
@@ -54,5 +54,18 @@ struct netns_ipv4 {
 
 	struct timer_list rt_secret_timer;
 	atomic_t rt_genid;
+
+#ifdef CONFIG_IP_MROUTE
+	struct sock		*mroute_sk;
+	struct mfc_cache	**mfc_cache_array;
+	struct vif_device	*vif_table;
+	int			maxvif;
+	atomic_t		cache_resolve_queue_len;
+	int			mroute_do_assert;
+	int			mroute_do_pim;
+#if defined(CONFIG_IP_PIMSM_V1) || defined(CONFIG_IP_PIMSM_V2)
+	int			mroute_reg_vif_num;
+#endif
+#endif
 };
 #endif
diff --git a/include/net/netrom.h b/include/net/netrom.h
index f06852bba62..15696b1fd30 100644
--- a/include/net/netrom.h
+++ b/include/net/netrom.h
@@ -59,10 +59,6 @@ enum {
 #define NR_MAX_WINDOW_SIZE		127			/* Maximum Window Allowable - 127 */
 #define	NR_MAX_PACKET_SIZE		236			/* Maximum Packet Length - 236 */
 
-struct nr_private {
-	struct net_device_stats	stats;
-};
-
 struct nr_sock {
 	struct sock		sock;
 	ax25_address		user_addr, source_addr, dest_addr;
diff --git a/include/net/phonet/phonet.h b/include/net/phonet/phonet.h
index 057b0a8a288..d43f71b5ec0 100644
--- a/include/net/phonet/phonet.h
+++ b/include/net/phonet/phonet.h
@@ -105,7 +105,6 @@ void phonet_proto_unregister(int protocol, struct phonet_protocol *pp);
 
 int phonet_sysctl_init(void);
 void phonet_sysctl_exit(void);
-void phonet_netlink_register(void);
 int isi_register(void);
 void isi_unregister(void);
 
diff --git a/include/net/phonet/pn_dev.h b/include/net/phonet/pn_dev.h
index aa1c59a1d33..5054dc5ea2c 100644
--- a/include/net/phonet/pn_dev.h
+++ b/include/net/phonet/pn_dev.h
@@ -28,7 +28,7 @@ struct phonet_device_list {
 	spinlock_t lock;
 };
 
-extern struct phonet_device_list pndevs;
+struct phonet_device_list *phonet_device_list(struct net *net);
 
 struct phonet_device {
 	struct list_head list;
@@ -36,8 +36,9 @@ struct phonet_device {
 	DECLARE_BITMAP(addrs, 64);
 };
 
-void phonet_device_init(void);
+int phonet_device_init(void);
 void phonet_device_exit(void);
+int phonet_netlink_register(void);
 struct net_device *phonet_device_get(struct net *net);
 
 int phonet_address_add(struct net_device *dev, u8 addr);
diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h
index 4082f39f507..e37fe3129c1 100644
--- a/include/net/pkt_sched.h
+++ b/include/net/pkt_sched.h
@@ -85,6 +85,7 @@ extern struct qdisc_rate_table *qdisc_get_rtab(struct tc_ratespec *r,
 		struct nlattr *tab);
 extern void qdisc_put_rtab(struct qdisc_rate_table *tab);
 extern void qdisc_put_stab(struct qdisc_size_table *tab);
+extern void qdisc_warn_nonwc(char *txt, struct Qdisc *qdisc);
 
 extern void __qdisc_run(struct Qdisc *q);
 
diff --git a/include/net/psnap.h b/include/net/psnap.h
index b2e01cc3fc8..fe456c295b0 100644
--- a/include/net/psnap.h
+++ b/include/net/psnap.h
@@ -1,7 +1,11 @@
 #ifndef _NET_PSNAP_H
 #define _NET_PSNAP_H
 
-extern struct datalink_proto *register_snap_client(unsigned char *desc, int (*rcvfunc)(struct sk_buff *, struct net_device *, struct packet_type *, struct net_device *orig_dev));
+extern struct datalink_proto *
+register_snap_client(const unsigned char *desc,
+		     int (*rcvfunc)(struct sk_buff *, struct net_device *,
+				    struct packet_type *,
+				    struct net_device *orig_dev));
 extern void unregister_snap_client(struct datalink_proto *proto);
 
 #endif
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index f8c47429044..964ffa0d881 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -42,24 +42,17 @@ struct Qdisc
 	int 			(*enqueue)(struct sk_buff *skb, struct Qdisc *dev);
 	struct sk_buff *	(*dequeue)(struct Qdisc *dev);
 	unsigned		flags;
-#define TCQ_F_BUILTIN	1
-#define TCQ_F_THROTTLED	2
-#define TCQ_F_INGRESS	4
+#define TCQ_F_BUILTIN		1
+#define TCQ_F_THROTTLED		2
+#define TCQ_F_INGRESS		4
+#define TCQ_F_WARN_NONWC	(1 << 16)
 	int			padded;
 	struct Qdisc_ops	*ops;
 	struct qdisc_size_table	*stab;
+	struct list_head	list;
 	u32			handle;
 	u32			parent;
 	atomic_t		refcnt;
-	unsigned long		state;
-	struct sk_buff		*gso_skb;
-	struct sk_buff_head	q;
-	struct netdev_queue	*dev_queue;
-	struct Qdisc		*next_sched;
-	struct list_head	list;
-
-	struct gnet_stats_basic	bstats;
-	struct gnet_stats_queue	qstats;
 	struct gnet_stats_rate_est	rate_est;
 	int			(*reshape_fail)(struct sk_buff *skb,
 					struct Qdisc *q);
@@ -70,6 +63,17 @@ struct Qdisc
 	 * and it will live until better solution will be invented.
 	 */
 	struct Qdisc		*__parent;
+	struct netdev_queue	*dev_queue;
+	struct Qdisc		*next_sched;
+
+	struct sk_buff		*gso_skb;
+	/*
+	 * For performance sake on SMP, we put highly modified fields at the end
+	 */
+	unsigned long		state;
+	struct sk_buff_head	q;
+	struct gnet_stats_basic bstats;
+	struct gnet_stats_queue	qstats;
 };
 
 struct Qdisc_class_ops
diff --git a/include/net/sctp/checksum.h b/include/net/sctp/checksum.h
index 2fec3c366e8..befc8d2a1b9 100644
--- a/include/net/sctp/checksum.h
+++ b/include/net/sctp/checksum.h
@@ -46,14 +46,14 @@
 #include <net/sctp/sctp.h>
 #include <linux/crc32c.h>
 
-static inline __be32 sctp_crc32c(__be32 crc, u8 *buffer, u16 length)
+static inline __u32 sctp_crc32c(__u32 crc, u8 *buffer, u16 length)
 {
-	return (__force __be32)crc32c((__force u32)crc, buffer, length);
+	return crc32c(crc, buffer, length);
 }
 
-static inline __be32 sctp_start_cksum(__u8 *buffer, __u16 length)
+static inline __u32 sctp_start_cksum(__u8 *buffer, __u16 length)
 {
-	__be32 crc = ~cpu_to_be32(0);
+	__u32 crc = ~(__u32)0;
 	__u8  zero[sizeof(__u32)] = {0};
 
 	/* Optimize this routine to be SCTP specific, knowing how
@@ -72,12 +72,12 @@ static inline __be32 sctp_start_cksum(__u8 *buffer, __u16 length)
 	return crc;
 }
 
-static inline __be32 sctp_update_cksum(__u8 *buffer, __u16 length, __be32 crc32)
+static inline __u32 sctp_update_cksum(__u8 *buffer, __u16 length, __u32 crc32)
 {
 	return sctp_crc32c(crc32, buffer, length);
 }
 
-static inline __be32 sctp_end_cksum(__be32 crc32)
+static inline __le32 sctp_end_cksum(__be32 crc32)
 {
-	return (__force __be32)~cpu_to_le32((__force u32)crc32);
+	return cpu_to_le32(~crc32);
 }
diff --git a/include/net/sctp/command.h b/include/net/sctp/command.h
index 88988ab03d7..3b966802e05 100644
--- a/include/net/sctp/command.h
+++ b/include/net/sctp/command.h
@@ -77,7 +77,8 @@ typedef enum {
 	SCTP_CMD_HB_TIMERS_START,    /* Start the heartbeat timers. */
 	SCTP_CMD_HB_TIMER_UPDATE,    /* Update a heartbeat timers.  */
 	SCTP_CMD_HB_TIMERS_STOP,     /* Stop the heartbeat timers.  */
-	SCTP_CMD_TRANSPORT_RESET,    /* Reset the status of a transport. */
+	SCTP_CMD_TRANSPORT_HB_SENT,  /* Reset the status of a transport. */
+	SCTP_CMD_TRANSPORT_IDLE,     /* Do manipulations on idle transport */
 	SCTP_CMD_TRANSPORT_ON,       /* Mark the transport as active. */
 	SCTP_CMD_REPORT_ERROR,   /* Pass this error back out of the sm. */
 	SCTP_CMD_REPORT_BAD_TAG, /* Verification tags didn't match. */
diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h
index bbb7742195b..9f80a766828 100644
--- a/include/net/sctp/sctp.h
+++ b/include/net/sctp/sctp.h
@@ -62,13 +62,6 @@
  *   and will continue to evolve.
  */
 
-
-
-#ifdef TEST_FRAME
-#undef CONFIG_SCTP_DBG_OBJCNT
-#undef CONFIG_SYSCTL
-#endif /* TEST_FRAME */
-
 #include <linux/types.h>
 #include <linux/slab.h>
 #include <linux/in.h>
@@ -138,6 +131,8 @@ void sctp_write_space(struct sock *sk);
 unsigned int sctp_poll(struct file *file, struct socket *sock,
 		poll_table *wait);
 void sctp_sock_rfree(struct sk_buff *skb);
+void sctp_copy_sock(struct sock *newsk, struct sock *sk,
+		    struct sctp_association *asoc);
 extern struct percpu_counter sctp_sockets_allocated;
 
 /*
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index 9661d7b765f..23f08fe1d50 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -218,6 +218,10 @@ extern struct sctp_globals {
 
 	/* Flag to idicate if SCTP-AUTH is enabled */
 	int auth_enable;
+
+	/* Flag to indicate whether computing and verifying checksum
+	 * is disabled. */
+        int checksum_disable;
 } sctp_globals;
 
 #define sctp_rto_initial		(sctp_globals.rto_initial)
@@ -252,6 +256,7 @@ extern struct sctp_globals {
 #define sctp_addip_noauth		(sctp_globals.addip_noauth_enable)
 #define sctp_prsctp_enable		(sctp_globals.prsctp_enable)
 #define sctp_auth_enable		(sctp_globals.auth_enable)
+#define sctp_checksum_disable		(sctp_globals.checksum_disable)
 
 /* SCTP Socket type: UDP or TCP style. */
 typedef enum {
@@ -905,8 +910,10 @@ struct sctp_transport {
 	 *		should be set. Every time the RTT
 	 *		calculation completes (i.e. the DATA chunk
 	 *		is SACK'd) clear this flag.
+	 * hb_sent : a flag that signals that we have a pending heartbeat.
 	 */
 	__u8 rto_pending;
+	__u8 hb_sent;
 
 	/* Flag to track the current fast recovery state */
 	__u8 fast_recovery;
diff --git a/include/net/sock.h b/include/net/sock.h
index eefeeaf7fc4..4bb1ff9fd15 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -158,7 +158,7 @@ struct sock_common {
   *	@sk_allocation: allocation mode
   *	@sk_sndbuf: size of send buffer in bytes
   *	@sk_flags: %SO_LINGER (l_onoff), %SO_BROADCAST, %SO_KEEPALIVE,
-  *		   %SO_OOBINLINE settings
+  *		   %SO_OOBINLINE settings, %SO_TIMESTAMPING settings
   *	@sk_no_check: %SO_NO_CHECK setting, wether or not checkup packets
   *	@sk_route_caps: route capabilities (e.g. %NETIF_F_TSO)
   *	@sk_gso_type: GSO type (e.g. %SKB_GSO_TCPV4)
@@ -488,6 +488,13 @@ enum sock_flags {
 	SOCK_RCVTSTAMPNS, /* %SO_TIMESTAMPNS setting */
 	SOCK_LOCALROUTE, /* route locally only, %SO_DONTROUTE setting */
 	SOCK_QUEUE_SHRUNK, /* write queue has been shrunk recently */
+	SOCK_TIMESTAMPING_TX_HARDWARE,  /* %SOF_TIMESTAMPING_TX_HARDWARE */
+	SOCK_TIMESTAMPING_TX_SOFTWARE,  /* %SOF_TIMESTAMPING_TX_SOFTWARE */
+	SOCK_TIMESTAMPING_RX_HARDWARE,  /* %SOF_TIMESTAMPING_RX_HARDWARE */
+	SOCK_TIMESTAMPING_RX_SOFTWARE,  /* %SOF_TIMESTAMPING_RX_SOFTWARE */
+	SOCK_TIMESTAMPING_SOFTWARE,     /* %SOF_TIMESTAMPING_SOFTWARE */
+	SOCK_TIMESTAMPING_RAW_HARDWARE, /* %SOF_TIMESTAMPING_RAW_HARDWARE */
+	SOCK_TIMESTAMPING_SYS_HARDWARE, /* %SOF_TIMESTAMPING_SYS_HARDWARE */
 };
 
 static inline void sock_copy_flags(struct sock *nsk, struct sock *osk)
@@ -944,6 +951,11 @@ extern struct sk_buff 		*sock_alloc_send_skb(struct sock *sk,
 						     unsigned long size,
 						     int noblock,
 						     int *errcode);
+extern struct sk_buff 		*sock_alloc_send_pskb(struct sock *sk,
+						      unsigned long header_len,
+						      unsigned long data_len,
+						      int noblock,
+						      int *errcode);
 extern void *sock_kmalloc(struct sock *sk, int size,
 			  gfp_t priority);
 extern void sock_kfree_s(struct sock *sk, void *mem, int size);
@@ -1340,14 +1352,45 @@ static __inline__ void
 sock_recv_timestamp(struct msghdr *msg, struct sock *sk, struct sk_buff *skb)
 {
 	ktime_t kt = skb->tstamp;
+	struct skb_shared_hwtstamps *hwtstamps = skb_hwtstamps(skb);
 
-	if (sock_flag(sk, SOCK_RCVTSTAMP))
+	/*
+	 * generate control messages if
+	 * - receive time stamping in software requested (SOCK_RCVTSTAMP
+	 *   or SOCK_TIMESTAMPING_RX_SOFTWARE)
+	 * - software time stamp available and wanted
+	 *   (SOCK_TIMESTAMPING_SOFTWARE)
+	 * - hardware time stamps available and wanted
+	 *   (SOCK_TIMESTAMPING_SYS_HARDWARE or
+	 *   SOCK_TIMESTAMPING_RAW_HARDWARE)
+	 */
+	if (sock_flag(sk, SOCK_RCVTSTAMP) ||
+	    sock_flag(sk, SOCK_TIMESTAMPING_RX_SOFTWARE) ||
+	    (kt.tv64 && sock_flag(sk, SOCK_TIMESTAMPING_SOFTWARE)) ||
+	    (hwtstamps->hwtstamp.tv64 &&
+	     sock_flag(sk, SOCK_TIMESTAMPING_RAW_HARDWARE)) ||
+	    (hwtstamps->syststamp.tv64 &&
+	     sock_flag(sk, SOCK_TIMESTAMPING_SYS_HARDWARE)))
 		__sock_recv_timestamp(msg, sk, skb);
 	else
 		sk->sk_stamp = kt;
 }
 
 /**
+ * sock_tx_timestamp - checks whether the outgoing packet is to be time stamped
+ * @msg:	outgoing packet
+ * @sk:		socket sending this packet
+ * @shtx:	filled with instructions for time stamping
+ *
+ * Currently only depends on SOCK_TIMESTAMPING* flags. Returns error code if
+ * parameters are invalid.
+ */
+extern int sock_tx_timestamp(struct msghdr *msg,
+			     struct sock *sk,
+			     union skb_shared_tx *shtx);
+
+
+/**
  * sk_eat_skb - Release a skb if it is no longer needed
  * @sk: socket to eat this skb from
  * @skb: socket buffer to eat
@@ -1415,7 +1458,7 @@ static inline struct sock *skb_steal_sock(struct sk_buff *skb)
 	return NULL;
 }
 
-extern void sock_enable_timestamp(struct sock *sk);
+extern void sock_enable_timestamp(struct sock *sk, int flag);
 extern int sock_get_timestamp(struct sock *, struct timeval __user *);
 extern int sock_get_timestampns(struct sock *, struct timespec __user *);
 
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 218235de896..e54c76d7549 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -481,7 +481,16 @@ static inline void tcp_clear_xmit_timers(struct sock *sk)
 }
 
 extern unsigned int tcp_sync_mss(struct sock *sk, u32 pmtu);
-extern unsigned int tcp_current_mss(struct sock *sk, int large);
+extern unsigned int tcp_current_mss(struct sock *sk);
+
+/* Bound MSS / TSO packet size with the half of the window */
+static inline int tcp_bound_to_half_wnd(struct tcp_sock *tp, int pktsize)
+{
+	if (tp->max_window && pktsize > (tp->max_window >> 1))
+		return max(tp->max_window >> 1, 68U - tp->tcp_header_len);
+	else
+		return pktsize;
+}
 
 /* tcp.c */
 extern void tcp_get_info(struct sock *, struct tcp_info *);
@@ -685,6 +694,7 @@ extern void tcp_get_allowed_congestion_control(char *buf, size_t len);
 extern int tcp_set_allowed_congestion_control(char *allowed);
 extern int tcp_set_congestion_control(struct sock *sk, const char *name);
 extern void tcp_slow_start(struct tcp_sock *tp);
+extern void tcp_cong_avoid_ai(struct tcp_sock *tp, u32 w);
 
 extern struct tcp_congestion_ops tcp_init_congestion_ops;
 extern u32 tcp_reno_ssthresh(struct sock *sk);
@@ -821,15 +831,15 @@ static inline void tcp_push_pending_frames(struct sock *sk)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
 
-	__tcp_push_pending_frames(sk, tcp_current_mss(sk, 1), tp->nonagle);
+	__tcp_push_pending_frames(sk, tcp_current_mss(sk), tp->nonagle);
 }
 
-static inline void tcp_init_wl(struct tcp_sock *tp, u32 ack, u32 seq)
+static inline void tcp_init_wl(struct tcp_sock *tp, u32 seq)
 {
 	tp->snd_wl1 = seq;
 }
 
-static inline void tcp_update_wl(struct tcp_sock *tp, u32 ack, u32 seq)
+static inline void tcp_update_wl(struct tcp_sock *tp, u32 seq)
 {
 	tp->snd_wl1 = seq;
 }
@@ -925,7 +935,6 @@ extern void tcp_done(struct sock *sk);
 static inline void tcp_sack_reset(struct tcp_options_received *rx_opt)
 {
 	rx_opt->dsack = 0;
-	rx_opt->eff_sacks = 0;
 	rx_opt->num_sacks = 0;
 }
 
@@ -997,11 +1006,21 @@ static inline int tcp_fin_time(const struct sock *sk)
 	return fin_timeout;
 }
 
-static inline int tcp_paws_check(const struct tcp_options_received *rx_opt, int rst)
+static inline int tcp_paws_check(const struct tcp_options_received *rx_opt,
+				 int paws_win)
 {
-	if ((s32)(rx_opt->rcv_tsval - rx_opt->ts_recent) >= 0)
-		return 0;
-	if (get_seconds() >= rx_opt->ts_recent_stamp + TCP_PAWS_24DAYS)
+	if ((s32)(rx_opt->ts_recent - rx_opt->rcv_tsval) <= paws_win)
+		return 1;
+	if (unlikely(get_seconds() >= rx_opt->ts_recent_stamp + TCP_PAWS_24DAYS))
+		return 1;
+
+	return 0;
+}
+
+static inline int tcp_paws_reject(const struct tcp_options_received *rx_opt,
+				  int rst)
+{
+	if (tcp_paws_check(rx_opt, 0))
 		return 0;
 
 	/* RST segments are not recommended to carry timestamp,
diff --git a/include/net/transp_v6.h b/include/net/transp_v6.h
index 876b6f2bb4f..bfb240c6cf7 100644
--- a/include/net/transp_v6.h
+++ b/include/net/transp_v6.h
@@ -46,7 +46,7 @@ extern int			datagram_send_ctl(struct net *net,
 						  struct ipv6_txoptions *opt,
 						  int *hlimit, int *tclass);
 
-#define		LOOPBACK4_IPV6		__constant_htonl(0x7f000006)
+#define		LOOPBACK4_IPV6		cpu_to_be32(0x7f000006)
 
 /*
  *	address family specific functions
diff --git a/include/net/udp.h b/include/net/udp.h
index 90e6ce56be6..93dbe294d45 100644
--- a/include/net/udp.h
+++ b/include/net/udp.h
@@ -124,6 +124,8 @@ static inline void udp_lib_close(struct sock *sk, long timeout)
 	sk_common_release(sk);
 }
 
+extern int	ipv4_rcv_saddr_equal(const struct sock *sk1,
+				    const struct sock *sk2);
 extern int	udp_lib_get_port(struct sock *sk, unsigned short snum,
 		int (*)(const struct sock*,const struct sock*));
 
diff --git a/include/net/wireless.h b/include/net/wireless.h
index 21c5d966142..64a76208580 100644
--- a/include/net/wireless.h
+++ b/include/net/wireless.h
@@ -69,6 +69,9 @@ enum ieee80211_channel_flags {
  * @band: band this channel belongs to.
  * @max_antenna_gain: maximum antenna gain in dBi
  * @max_power: maximum transmission power (in dBm)
+ * @beacon_found: helper to regulatory code to indicate when a beacon
+ *	has been found on this channel. Use regulatory_hint_found_beacon()
+ *	to enable this, this is is useful only on 5 GHz band.
  * @orig_mag: internal use
  * @orig_mpwr: internal use
  */
@@ -80,6 +83,7 @@ struct ieee80211_channel {
 	u32 flags;
 	int max_antenna_gain;
 	int max_power;
+	bool beacon_found;
 	u32 orig_flags;
 	int orig_mag, orig_mpwr;
 };
@@ -181,12 +185,26 @@ struct ieee80211_supported_band {
  * struct wiphy - wireless hardware description
  * @idx: the wiphy index assigned to this item
  * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name>
- * @fw_handles_regulatory: tells us the firmware for this device
- * 	has its own regulatory solution and cannot identify the
+ * @custom_regulatory: tells us the driver for this device
+ * 	has its own custom regulatory domain and cannot identify the
  * 	ISO / IEC 3166 alpha2 it belongs to. When this is enabled
  * 	we will disregard the first regulatory hint (when the
  * 	initiator is %REGDOM_SET_BY_CORE).
+ * @strict_regulatory: tells us the driver for this device will ignore
+ * 	regulatory domain settings until it gets its own regulatory domain
+ * 	via its regulatory_hint(). After its gets its own regulatory domain
+ * 	it will only allow further regulatory domain settings to further
+ * 	enhance compliance. For example if channel 13 and 14 are disabled
+ * 	by this regulatory domain no user regulatory domain can enable these
+ * 	channels at a later time. This can be used for devices which do not
+ * 	have calibration information gauranteed for frequencies or settings
+ * 	outside of its regulatory domain.
  * @reg_notifier: the driver's regulatory notification callback
+ * @regd: the driver's regulatory domain, if one was requested via
+ * 	the regulatory_hint() API. This can be used by the driver
+ *	on the reg_notifier() if it chooses to ignore future
+ *	regulatory domain changes caused by other drivers.
+ * @signal_type: signal type reported in &struct cfg80211_bss.
  */
 struct wiphy {
 	/* assign these fields before you register the wiphy */
@@ -197,7 +215,13 @@ struct wiphy {
 	/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
 	u16 interface_modes;
 
-	bool fw_handles_regulatory;
+	bool custom_regulatory;
+	bool strict_regulatory;
+
+	enum cfg80211_signal_type signal_type;
+
+	int bss_priv_size;
+	u8 max_scan_ssids;
 
 	/* If multiple wiphys are registered and you're handed e.g.
 	 * a regular netdev with assigned ieee80211_ptr, you won't
@@ -209,10 +233,13 @@ struct wiphy {
 	struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS];
 
 	/* Lets us get back the wiphy on the callback */
-	int (*reg_notifier)(struct wiphy *wiphy, enum reg_set_by setby);
+	int (*reg_notifier)(struct wiphy *wiphy,
+			    struct regulatory_request *request);
 
 	/* fields below are read-only, assigned by cfg80211 */
 
+	const struct ieee80211_regdomain *regd;
+
 	/* the item in /sys/class/ieee80211/ points to this,
 	 * you need use set_wiphy_dev() (see below) */
 	struct device dev;
@@ -361,7 +388,7 @@ ieee80211_get_channel(struct wiphy *wiphy, int freq)
  */
 struct ieee80211_rate *
 ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
-			    u64 basic_rates, int bitrate);
+			    u32 basic_rates, int bitrate);
 
 /**
  * regulatory_hint - driver hint to the wireless core a regulatory domain
@@ -378,8 +405,15 @@ ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
  * domain should be in or by providing a completely build regulatory domain.
  * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried
  * for a regulatory domain structure for the respective country.
+ *
+ * The wiphy must have been registered to cfg80211 prior to this call.
+ * For cfg80211 drivers this means you must first use wiphy_register(),
+ * for mac80211 drivers you must first use ieee80211_register_hw().
+ *
+ * Drivers should check the return value, its possible you can get
+ * an -ENOMEM.
  */
-extern void regulatory_hint(struct wiphy *wiphy, const char *alpha2);
+extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2);
 
 /**
  * regulatory_hint_11d - hints a country IE as a regulatory domain
@@ -395,4 +429,44 @@ extern void regulatory_hint(struct wiphy *wiphy, const char *alpha2);
 extern void regulatory_hint_11d(struct wiphy *wiphy,
 				u8 *country_ie,
 				u8 country_ie_len);
+/**
+ * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain
+ * @wiphy: the wireless device we want to process the regulatory domain on
+ * @regd: the custom regulatory domain to use for this wiphy
+ *
+ * Drivers can sometimes have custom regulatory domains which do not apply
+ * to a specific country. Drivers can use this to apply such custom regulatory
+ * domains. This routine must be called prior to wiphy registration. The
+ * custom regulatory domain will be trusted completely and as such previous
+ * default channel settings will be disregarded. If no rule is found for a
+ * channel on the regulatory domain the channel will be disabled.
+ */
+extern void wiphy_apply_custom_regulatory(
+	struct wiphy *wiphy,
+	const struct ieee80211_regdomain *regd);
+
+/**
+ * freq_reg_info - get regulatory information for the given frequency
+ * @wiphy: the wiphy for which we want to process this rule for
+ * @center_freq: Frequency in KHz for which we want regulatory information for
+ * @bandwidth: the bandwidth requirement you have in KHz, if you do not have one
+ * 	you can set this to 0. If this frequency is allowed we then set
+ * 	this value to the maximum allowed bandwidth.
+ * @reg_rule: the regulatory rule which we have for this frequency
+ *
+ * Use this function to get the regulatory rule for a specific frequency on
+ * a given wireless device. If the device has a specific regulatory domain
+ * it wants to follow we respect that unless a country IE has been received
+ * and processed already.
+ *
+ * Returns 0 if it was able to find a valid regulatory rule which does
+ * apply to the given center_freq otherwise it returns non-zero. It will
+ * also return -ERANGE if we determine the given center_freq does not even have
+ * a regulatory rule for a frequency range in the center_freq's band. See
+ * freq_in_rule_band() for our current definition of a band -- this is purely
+ * subjective and right now its 802.11 specific.
+ */
+extern int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth,
+			 const struct ieee80211_reg_rule **reg_rule);
+
 #endif /* __NET_WIRELESS_H */
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index 936e333e7ce..c179318edd9 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -388,7 +388,7 @@ enum {
 	IB_MULTICAST_QPN = 0xffffff
 };
 
-#define IB_LID_PERMISSIVE	__constant_htons(0xFFFF)
+#define IB_LID_PERMISSIVE	cpu_to_be16(0xFFFF)
 
 enum ib_ah_flags {
 	IB_AH_GRH	= 1
diff --git a/include/trace/skb.h b/include/trace/skb.h
new file mode 100644
index 00000000000..a96610f92f6
--- /dev/null
+++ b/include/trace/skb.h
@@ -0,0 +1,11 @@
+#ifndef _TRACE_SKB_H_
+#define _TRACE_SKB_H_
+
+#include <linux/skbuff.h>
+#include <linux/tracepoint.h>
+
+DECLARE_TRACE(kfree_skb,
+	TPPROTO(struct sk_buff *skb, void *location),
+	TPARGS(skb, location));
+
+#endif
author	Linus Torvalds <torvalds@linux-foundation.org>	2009-03-26 15:54:36 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2009-03-26 15:54:36 -0700
commit	13220a94d35708d5378114e96ffcc88d0a74fe99 (patch)
tree	be6530677d5f9536c7211e05ba012923e4c0b307 /include
parent	8690d8a9f6c2d5728a9c9f68231f1bb4de109e3a (diff)
parent	08abe18af1f78ee80c3c3a5ac47c3e0ae0beadf6 (diff)