Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-kgdb

* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-kgdb:
  kgdb: always use icache flush for sw breakpoints
  kgdb: fix SMP NMI kgdb_handle_exception exit race
  kgdb: documentation fixes
  kgdb: allow static kgdbts boot configuration
  kgdb: add documentation
  kgdb: Kconfig fix
  kgdb: add kgdb internal test suite
  kgdb: fix several kgdb regressions
  kgdb: kgdboc pl011 I/O module
  kgdb: fix optional arch functions and probe_kernel_*
  kgdb: add x86 HW breakpoints
  kgdb: print breakpoint removed on exception
  kgdb: clocksource watchdog
  kgdb: fix NMI hangs
  kgdb: fix kgdboc dynamic module configuration
  kgdb: document parameters
  x86: kgdb support
  consoles: polling support, kgdboc
  kgdb: core
  uaccess: add probe_kernel_write()

7 files changed, 402 insertions, 0 deletions

diff --git a/include/asm-x86/kdebug.h b/include/asm-x86/kdebug.h
index 0c4175390da..96651bb59ba 100644
--- a/include/asm-x86/kdebug.h
+++ b/include/asm-x86/kdebug.h
@@ -20,6 +20,7 @@ enum die_val {
 	DIE_CALL,
 	DIE_NMI_IPI,
 	DIE_PAGE_FAULT,
+	DIE_NMIUNKNOWN,
 };
 
 extern void printk_address(unsigned long address, int reliable);
diff --git a/include/asm-x86/kgdb.h b/include/asm-x86/kgdb.h
new file mode 100644
index 00000000000..484c47554f3
--- /dev/null
+++ b/include/asm-x86/kgdb.h
@@ -0,0 +1,81 @@
+#ifndef _ASM_KGDB_H_
+#define _ASM_KGDB_H_
+
+/*
+ * Copyright (C) 2001-2004 Amit S. Kale
+ * Copyright (C) 2008 Wind River Systems, Inc.
+ */
+
+/*
+ * BUFMAX defines the maximum number of characters in inbound/outbound
+ * buffers at least NUMREGBYTES*2 are needed for register packets
+ * Longer buffer is needed to list all threads
+ */
+#define BUFMAX			1024
+
+/*
+ *  Note that this register image is in a different order than
+ *  the register image that Linux produces at interrupt time.
+ *
+ *  Linux's register image is defined by struct pt_regs in ptrace.h.
+ *  Just why GDB uses a different order is a historical mystery.
+ */
+#ifdef CONFIG_X86_32
+enum regnames {
+	GDB_AX,			/* 0 */
+	GDB_CX,			/* 1 */
+	GDB_DX,			/* 2 */
+	GDB_BX,			/* 3 */
+	GDB_SP,			/* 4 */
+	GDB_BP,			/* 5 */
+	GDB_SI,			/* 6 */
+	GDB_DI,			/* 7 */
+	GDB_PC,			/* 8 also known as eip */
+	GDB_PS,			/* 9 also known as eflags */
+	GDB_CS,			/* 10 */
+	GDB_SS,			/* 11 */
+	GDB_DS,			/* 12 */
+	GDB_ES,			/* 13 */
+	GDB_FS,			/* 14 */
+	GDB_GS,			/* 15 */
+};
+#else /* ! CONFIG_X86_32 */
+enum regnames {
+	GDB_AX,			/* 0 */
+	GDB_DX,			/* 1 */
+	GDB_CX,			/* 2 */
+	GDB_BX,			/* 3 */
+	GDB_SI,			/* 4 */
+	GDB_DI,			/* 5 */
+	GDB_BP,			/* 6 */
+	GDB_SP,			/* 7 */
+	GDB_R8,			/* 8 */
+	GDB_R9,			/* 9 */
+	GDB_R10,		/* 10 */
+	GDB_R11,		/* 11 */
+	GDB_R12,		/* 12 */
+	GDB_R13,		/* 13 */
+	GDB_R14,		/* 14 */
+	GDB_R15,		/* 15 */
+	GDB_PC,			/* 16 */
+	GDB_PS,			/* 17 */
+};
+#endif /* CONFIG_X86_32 */
+
+/*
+ * Number of bytes of registers:
+ */
+#ifdef CONFIG_X86_32
+# define NUMREGBYTES		64
+#else
+# define NUMREGBYTES		((GDB_PS+1)*8)
+#endif
+
+static inline void arch_kgdb_breakpoint(void)
+{
+	asm("   int $3");
+}
+#define BREAK_INSTR_SIZE	1
+#define CACHE_FLUSH_IS_SAFE	1
+
+#endif				/* _ASM_KGDB_H_ */
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 85778a4b120..35094479ca5 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -216,6 +216,7 @@ static inline void clocksource_calculate_interval(struct clocksource *c,
 /* used to install a new clocksource */
 extern int clocksource_register(struct clocksource*);
 extern void clocksource_unregister(struct clocksource*);
+extern void clocksource_touch_watchdog(void);
 extern struct clocksource* clocksource_get_next(void);
 extern void clocksource_change_rating(struct clocksource *cs, int rating);
 extern void clocksource_resume(void);
diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h
new file mode 100644
index 00000000000..9757b1a6d9d
--- /dev/null
+++ b/include/linux/kgdb.h
@@ -0,0 +1,281 @@
+/*
+ * This provides the callbacks and functions that KGDB needs to share between
+ * the core, I/O and arch-specific portions.
+ *
+ * Author: Amit Kale <amitkale@linsyssoft.com> and
+ *         Tom Rini <trini@kernel.crashing.org>
+ *
+ * 2001-2004 (c) Amit S. Kale and 2003-2005 (c) MontaVista Software, Inc.
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef _KGDB_H_
+#define _KGDB_H_
+
+#include <linux/serial_8250.h>
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+#include <asm/atomic.h>
+#include <asm/kgdb.h>
+
+struct pt_regs;
+
+/**
+ *	kgdb_skipexception - (optional) exit kgdb_handle_exception early
+ *	@exception: Exception vector number
+ *	@regs: Current &struct pt_regs.
+ *
+ *	On some architectures it is required to skip a breakpoint
+ *	exception when it occurs after a breakpoint has been removed.
+ *	This can be implemented in the architecture specific portion of
+ *	for kgdb.
+ */
+extern int kgdb_skipexception(int exception, struct pt_regs *regs);
+
+/**
+ *	kgdb_post_primary_code - (optional) Save error vector/code numbers.
+ *	@regs: Original pt_regs.
+ *	@e_vector: Original error vector.
+ *	@err_code: Original error code.
+ *
+ *	This is usually needed on architectures which support SMP and
+ *	KGDB.  This function is called after all the secondary cpus have
+ *	been put to a know spin state and the primary CPU has control over
+ *	KGDB.
+ */
+extern void kgdb_post_primary_code(struct pt_regs *regs, int e_vector,
+				  int err_code);
+
+/**
+ *	kgdb_disable_hw_debug - (optional) Disable hardware debugging hook
+ *	@regs: Current &struct pt_regs.
+ *
+ *	This function will be called if the particular architecture must
+ *	disable hardware debugging while it is processing gdb packets or
+ *	handling exception.
+ */
+extern void kgdb_disable_hw_debug(struct pt_regs *regs);
+
+struct tasklet_struct;
+struct task_struct;
+struct uart_port;
+
+/**
+ *	kgdb_breakpoint - compiled in breakpoint
+ *
+ *	This will be impelmented a static inline per architecture.  This
+ *	function is called by the kgdb core to execute an architecture
+ *	specific trap to cause kgdb to enter the exception processing.
+ *
+ */
+void kgdb_breakpoint(void);
+
+extern int kgdb_connected;
+
+extern atomic_t			kgdb_setting_breakpoint;
+extern atomic_t			kgdb_cpu_doing_single_step;
+
+extern struct task_struct	*kgdb_usethread;
+extern struct task_struct	*kgdb_contthread;
+
+enum kgdb_bptype {
+	BP_BREAKPOINT = 0,
+	BP_HARDWARE_BREAKPOINT,
+	BP_WRITE_WATCHPOINT,
+	BP_READ_WATCHPOINT,
+	BP_ACCESS_WATCHPOINT
+};
+
+enum kgdb_bpstate {
+	BP_UNDEFINED = 0,
+	BP_REMOVED,
+	BP_SET,
+	BP_ACTIVE
+};
+
+struct kgdb_bkpt {
+	unsigned long		bpt_addr;
+	unsigned char		saved_instr[BREAK_INSTR_SIZE];
+	enum kgdb_bptype	type;
+	enum kgdb_bpstate	state;
+};
+
+#ifndef KGDB_MAX_BREAKPOINTS
+# define KGDB_MAX_BREAKPOINTS	1000
+#endif
+
+#define KGDB_HW_BREAKPOINT	1
+
+/*
+ * Functions each KGDB-supporting architecture must provide:
+ */
+
+/**
+ *	kgdb_arch_init - Perform any architecture specific initalization.
+ *
+ *	This function will handle the initalization of any architecture
+ *	specific callbacks.
+ */
+extern int kgdb_arch_init(void);
+
+/**
+ *	kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ *	This function will handle the uninitalization of any architecture
+ *	specific callbacks, for dynamic registration and unregistration.
+ */
+extern void kgdb_arch_exit(void);
+
+/**
+ *	pt_regs_to_gdb_regs - Convert ptrace regs to GDB regs
+ *	@gdb_regs: A pointer to hold the registers in the order GDB wants.
+ *	@regs: The &struct pt_regs of the current process.
+ *
+ *	Convert the pt_regs in @regs into the format for registers that
+ *	GDB expects, stored in @gdb_regs.
+ */
+extern void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs);
+
+/**
+ *	sleeping_thread_to_gdb_regs - Convert ptrace regs to GDB regs
+ *	@gdb_regs: A pointer to hold the registers in the order GDB wants.
+ *	@p: The &struct task_struct of the desired process.
+ *
+ *	Convert the register values of the sleeping process in @p to
+ *	the format that GDB expects.
+ *	This function is called when kgdb does not have access to the
+ *	&struct pt_regs and therefore it should fill the gdb registers
+ *	@gdb_regs with what has	been saved in &struct thread_struct
+ *	thread field during switch_to.
+ */
+extern void
+sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p);
+
+/**
+ *	gdb_regs_to_pt_regs - Convert GDB regs to ptrace regs.
+ *	@gdb_regs: A pointer to hold the registers we've received from GDB.
+ *	@regs: A pointer to a &struct pt_regs to hold these values in.
+ *
+ *	Convert the GDB regs in @gdb_regs into the pt_regs, and store them
+ *	in @regs.
+ */
+extern void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs);
+
+/**
+ *	kgdb_arch_handle_exception - Handle architecture specific GDB packets.
+ *	@vector: The error vector of the exception that happened.
+ *	@signo: The signal number of the exception that happened.
+ *	@err_code: The error code of the exception that happened.
+ *	@remcom_in_buffer: The buffer of the packet we have read.
+ *	@remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into.
+ *	@regs: The &struct pt_regs of the current process.
+ *
+ *	This function MUST handle the 'c' and 's' command packets,
+ *	as well packets to set / remove a hardware breakpoint, if used.
+ *	If there are additional packets which the hardware needs to handle,
+ *	they are handled here.  The code should return -1 if it wants to
+ *	process more packets, and a %0 or %1 if it wants to exit from the
+ *	kgdb callback.
+ */
+extern int
+kgdb_arch_handle_exception(int vector, int signo, int err_code,
+			   char *remcom_in_buffer,
+			   char *remcom_out_buffer,
+			   struct pt_regs *regs);
+
+/**
+ *	kgdb_roundup_cpus - Get other CPUs into a holding pattern
+ *	@flags: Current IRQ state
+ *
+ *	On SMP systems, we need to get the attention of the other CPUs
+ *	and get them be in a known state.  This should do what is needed
+ *	to get the other CPUs to call kgdb_wait(). Note that on some arches,
+ *	the NMI approach is not used for rounding up all the CPUs. For example,
+ *	in case of MIPS, smp_call_function() is used to roundup CPUs. In
+ *	this case, we have to make sure that interrupts are enabled before
+ *	calling smp_call_function(). The argument to this function is
+ *	the flags that will be used when restoring the interrupts. There is
+ *	local_irq_save() call before kgdb_roundup_cpus().
+ *
+ *	On non-SMP systems, this is not called.
+ */
+extern void kgdb_roundup_cpus(unsigned long flags);
+
+/* Optional functions. */
+extern int kgdb_validate_break_address(unsigned long addr);
+extern int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr);
+extern int kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle);
+
+/**
+ * struct kgdb_arch - Describe architecture specific values.
+ * @gdb_bpt_instr: The instruction to trigger a breakpoint.
+ * @flags: Flags for the breakpoint, currently just %KGDB_HW_BREAKPOINT.
+ * @set_breakpoint: Allow an architecture to specify how to set a software
+ * breakpoint.
+ * @remove_breakpoint: Allow an architecture to specify how to remove a
+ * software breakpoint.
+ * @set_hw_breakpoint: Allow an architecture to specify how to set a hardware
+ * breakpoint.
+ * @remove_hw_breakpoint: Allow an architecture to specify how to remove a
+ * hardware breakpoint.
+ * @remove_all_hw_break: Allow an architecture to specify how to remove all
+ * hardware breakpoints.
+ * @correct_hw_break: Allow an architecture to specify how to correct the
+ * hardware debug registers.
+ */
+struct kgdb_arch {
+	unsigned char		gdb_bpt_instr[BREAK_INSTR_SIZE];
+	unsigned long		flags;
+
+	int	(*set_breakpoint)(unsigned long, char *);
+	int	(*remove_breakpoint)(unsigned long, char *);
+	int	(*set_hw_breakpoint)(unsigned long, int, enum kgdb_bptype);
+	int	(*remove_hw_breakpoint)(unsigned long, int, enum kgdb_bptype);
+	void	(*remove_all_hw_break)(void);
+	void	(*correct_hw_break)(void);
+};
+
+/**
+ * struct kgdb_io - Describe the interface for an I/O driver to talk with KGDB.
+ * @name: Name of the I/O driver.
+ * @read_char: Pointer to a function that will return one char.
+ * @write_char: Pointer to a function that will write one char.
+ * @flush: Pointer to a function that will flush any pending writes.
+ * @init: Pointer to a function that will initialize the device.
+ * @pre_exception: Pointer to a function that will do any prep work for
+ * the I/O driver.
+ * @post_exception: Pointer to a function that will do any cleanup work
+ * for the I/O driver.
+ */
+struct kgdb_io {
+	const char		*name;
+	int			(*read_char) (void);
+	void			(*write_char) (u8);
+	void			(*flush) (void);
+	int			(*init) (void);
+	void			(*pre_exception) (void);
+	void			(*post_exception) (void);
+};
+
+extern struct kgdb_arch		arch_kgdb_ops;
+
+extern int kgdb_register_io_module(struct kgdb_io *local_kgdb_io_ops);
+extern void kgdb_unregister_io_module(struct kgdb_io *local_kgdb_io_ops);
+
+extern int kgdb_hex2long(char **ptr, long *long_val);
+extern int kgdb_mem2hex(char *mem, char *buf, int count);
+extern int kgdb_hex2mem(char *buf, char *mem, int count);
+
+extern int kgdb_isremovedbreak(unsigned long addr);
+
+extern int
+kgdb_handle_exception(int ex_vector, int signo, int err_code,
+		      struct pt_regs *regs);
+extern int kgdb_nmicallback(int cpu, void *regs);
+
+extern int			kgdb_single_step;
+extern atomic_t			kgdb_active;
+
+#endif /* _KGDB_H_ */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 289942fc665..7cb094a8245 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -213,6 +213,10 @@ struct uart_ops {
 	void		(*config_port)(struct uart_port *, int);
 	int		(*verify_port)(struct uart_port *, struct serial_struct *);
 	int		(*ioctl)(struct uart_port *, unsigned int, unsigned long);
+#ifdef CONFIG_CONSOLE_POLL
+	void	(*poll_put_char)(struct uart_port *, unsigned char);
+	int		(*poll_get_char)(struct uart_port *);
+#endif
 };
 
 #define UART_CONFIG_TYPE	(1 << 0)
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 85c95cd39bc..21f69aca450 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -125,6 +125,7 @@
 #include <linux/cdev.h>
 
 struct tty_struct;
+struct tty_driver;
 
 struct tty_operations {
 	int  (*open)(struct tty_struct * tty, struct file * filp);
@@ -157,6 +158,11 @@ struct tty_operations {
 	int (*tiocmget)(struct tty_struct *tty, struct file *file);
 	int (*tiocmset)(struct tty_struct *tty, struct file *file,
 			unsigned int set, unsigned int clear);
+#ifdef CONFIG_CONSOLE_POLL
+	int (*poll_init)(struct tty_driver *driver, int line, char *options);
+	int (*poll_get_char)(struct tty_driver *driver, int line);
+	void (*poll_put_char)(struct tty_driver *driver, int line, char ch);
+#endif
 };
 
 struct tty_driver {
@@ -220,6 +226,11 @@ struct tty_driver {
 	int (*tiocmget)(struct tty_struct *tty, struct file *file);
 	int (*tiocmset)(struct tty_struct *tty, struct file *file,
 			unsigned int set, unsigned int clear);
+#ifdef CONFIG_CONSOLE_POLL
+	int (*poll_init)(struct tty_driver *driver, int line, char *options);
+	int (*poll_get_char)(struct tty_driver *driver, int line);
+	void (*poll_put_char)(struct tty_driver *driver, int line, char ch);
+#endif
 
 	struct list_head tty_drivers;
 };
@@ -230,6 +241,7 @@ struct tty_driver *alloc_tty_driver(int lines);
 void put_tty_driver(struct tty_driver *driver);
 void tty_set_operations(struct tty_driver *driver,
 			const struct tty_operations *op);
+extern struct tty_driver *tty_find_polling_driver(char *name, int *line);
 
 /* tty driver magic number */
 #define TTY_DRIVER_MAGIC		0x5402
diff --git a/include/linux/uaccess.h b/include/linux/uaccess.h
index 975c963e578..fec6decfb98 100644
--- a/include/linux/uaccess.h
+++ b/include/linux/uaccess.h
@@ -84,4 +84,26 @@ static inline unsigned long __copy_from_user_nocache(void *to,
 		ret;					\
 	})
 
+/*
+ * probe_kernel_read(): safely attempt to read from a location
+ * @dst: pointer to the buffer that shall take the data
+ * @src: address to read from
+ * @size: size of the data chunk
+ *
+ * Safely read from address @src to the buffer at @dst.  If a kernel fault
+ * happens, handle that and return -EFAULT.
+ */
+extern long probe_kernel_read(void *dst, void *src, size_t size);
+
+/*
+ * probe_kernel_write(): safely attempt to write to a location
+ * @dst: address to write to
+ * @src: pointer to the data that shall be written
+ * @size: size of the data chunk
+ *
+ * Safely write to address @dst from the buffer at @src.  If a kernel fault
+ * happens, handle that and return -EFAULT.
+ */
+extern long probe_kernel_write(void *dst, void *src, size_t size);
+
 #endif		/* __LINUX_UACCESS_H__ */