fb: add support of LCD display controller on pxa168/910 (base layer)

This driver is originally written by Lennert, modified by Green to be
feature complete,  and ported by Jun Nie and Kevin Liu for pxa168/910
processors.

The patch adds support for the on-chip LCD display controller, it
currently supports the base (graphics) layer only.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Green Wan <gwan@marvell.com>
Cc: Peter Liao <pliao@marvell.com>
Signed-off-by: Jun Nie <njun@marvell.com>
Signed-off-by: Kevin Liu <kliu5@marvell.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

1 files changed, 127 insertions, 0 deletions

diff --git a/include/video/pxa168fb.h b/include/video/pxa168fb.h
new file mode 100644
index 00000000000..b5cc72fe046
--- /dev/null
+++ b/include/video/pxa168fb.h
@@ -0,0 +1,127 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/pxa168fb.h
+ *
+ *  Copyright (C) 2009 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_PXA168FB_H
+#define __ASM_MACH_PXA168FB_H
+
+#include <linux/fb.h>
+#include <linux/interrupt.h>
+
+/* Dumb interface */
+#define PIN_MODE_DUMB_24		0
+#define PIN_MODE_DUMB_18_SPI		1
+#define PIN_MODE_DUMB_18_GPIO		2
+#define PIN_MODE_DUMB_16_SPI		3
+#define PIN_MODE_DUMB_16_GPIO		4
+#define PIN_MODE_DUMB_12_SPI_GPIO	5
+#define PIN_MODE_SMART_18_SPI		6
+#define PIN_MODE_SMART_16_SPI		7
+#define PIN_MODE_SMART_8_SPI_GPIO	8
+
+/* Dumb interface pin allocation */
+#define DUMB_MODE_RGB565		0
+#define DUMB_MODE_RGB565_UPPER		1
+#define DUMB_MODE_RGB666		2
+#define DUMB_MODE_RGB666_UPPER		3
+#define DUMB_MODE_RGB444		4
+#define DUMB_MODE_RGB444_UPPER		5
+#define DUMB_MODE_RGB888		6
+
+/* default fb buffer size WVGA-32bits */
+#define DEFAULT_FB_SIZE	(800 * 480 * 4)
+
+/*
+ * Buffer pixel format
+ * bit0 is for rb swap.
+ * bit12 is for Y UorV swap
+ */
+#define PIX_FMT_RGB565		0
+#define PIX_FMT_BGR565		1
+#define PIX_FMT_RGB1555		2
+#define PIX_FMT_BGR1555		3
+#define PIX_FMT_RGB888PACK	4
+#define PIX_FMT_BGR888PACK	5
+#define PIX_FMT_RGB888UNPACK	6
+#define PIX_FMT_BGR888UNPACK	7
+#define PIX_FMT_RGBA888		8
+#define PIX_FMT_BGRA888		9
+#define PIX_FMT_YUV422PACK	10
+#define PIX_FMT_YVU422PACK	11
+#define PIX_FMT_YUV422PLANAR	12
+#define PIX_FMT_YVU422PLANAR	13
+#define PIX_FMT_YUV420PLANAR	14
+#define PIX_FMT_YVU420PLANAR	15
+#define PIX_FMT_PSEUDOCOLOR	20
+#define PIX_FMT_UYVY422PACK	(0x1000|PIX_FMT_YUV422PACK)
+
+/*
+ * PXA LCD controller private state.
+ */
+struct pxa168fb_info {
+	struct device		*dev;
+	struct clk		*clk;
+	struct fb_info		*info;
+
+	void __iomem		*reg_base;
+	dma_addr_t		fb_start_dma;
+	u32			pseudo_palette[16];
+
+	int			pix_fmt;
+	unsigned		is_blanked:1;
+	unsigned		panel_rbswap:1;
+	unsigned		active:1;
+};
+
+/*
+ * PXA fb machine information
+ */
+struct pxa168fb_mach_info {
+	char	id[16];
+
+	int		num_modes;
+	struct fb_videomode *modes;
+
+	/*
+	 * Pix_fmt
+	 */
+	unsigned	pix_fmt;
+
+	/*
+	 * I/O pin allocation.
+	 */
+	unsigned	io_pin_allocation_mode:4;
+
+	/*
+	 * Dumb panel -- assignment of R/G/B component info to the 24
+	 * available external data lanes.
+	 */
+	unsigned	dumb_mode:4;
+	unsigned	panel_rgb_reverse_lanes:1;
+
+	/*
+	 * Dumb panel -- GPIO output data.
+	 */
+	unsigned	gpio_output_mask:8;
+	unsigned	gpio_output_data:8;
+
+	/*
+	 * Dumb panel -- configurable output signal polarity.
+	 */
+	unsigned	invert_composite_blank:1;
+	unsigned	invert_pix_val_ena:1;
+	unsigned	invert_pixclock:1;
+	unsigned	invert_vsync:1;
+	unsigned	invert_hsync:1;
+	unsigned	panel_rbswap:1;
+	unsigned	active:1;
+	unsigned	enable_lcd:1;
+};
+
+#endif /* __ASM_MACH_PXA168FB_H */