aboutsummaryrefslogtreecommitdiff
path: root/include/net/inet_sock.h
diff options
context:
space:
mode:
authorTom Herbert <therbert@google.com>2010-04-16 16:01:27 -0700
committerDavid S. Miller <davem@davemloft.net>2010-04-16 16:01:27 -0700
commitfec5e652e58fa6017b2c9e06466cb2a6538de5b4 (patch)
treee034f2a1e7930a0a225bd30896f834ec5e09c084 /include/net/inet_sock.h
parentb5d43998234331b9c01bd2165fdbb25115f4387f (diff)
rfs: Receive Flow Steering
This patch implements receive flow steering (RFS). RFS steers received packets for layer 3 and 4 processing to the CPU where the application for the corresponding flow is running. RFS is an extension of Receive Packet Steering (RPS). The basic idea of RFS is that when an application calls recvmsg (or sendmsg) the application's running CPU is stored in a hash table that is indexed by the connection's rxhash which is stored in the socket structure. The rxhash is passed in skb's received on the connection from netif_receive_skb. For each received packet, the associated rxhash is used to look up the CPU in the hash table, if a valid CPU is set then the packet is steered to that CPU using the RPS mechanisms. The convolution of the simple approach is that it would potentially allow OOO packets. If threads are thrashing around CPUs or multiple threads are trying to read from the same sockets, a quickly changing CPU value in the hash table could cause rampant OOO packets-- we consider this a non-starter. To avoid OOO packets, this solution implements two types of hash tables: rps_sock_flow_table and rps_dev_flow_table. rps_sock_table is a global hash table. Each entry is just a CPU number and it is populated in recvmsg and sendmsg as described above. This table contains the "desired" CPUs for flows. rps_dev_flow_table is specific to each device queue. Each entry contains a CPU and a tail queue counter. The CPU is the "current" CPU for a matching flow. The tail queue counter holds the value of a tail queue counter for the associated CPU's backlog queue at the time of last enqueue for a flow matching the entry. Each backlog queue has a queue head counter which is incremented on dequeue, and so a queue tail counter is computed as queue head count + queue length. When a packet is enqueued on a backlog queue, the current value of the queue tail counter is saved in the hash entry of the rps_dev_flow_table. And now the trick: when selecting the CPU for RPS (get_rps_cpu) the rps_sock_flow table and the rps_dev_flow table for the RX queue are consulted. When the desired CPU for the flow (found in the rps_sock_flow table) does not match the current CPU (found in the rps_dev_flow table), the current CPU is changed to the desired CPU if one of the following is true: - The current CPU is unset (equal to RPS_NO_CPU) - Current CPU is offline - The current CPU's queue head counter >= queue tail counter in the rps_dev_flow table. This checks if the queue tail has advanced beyond the last packet that was enqueued using this table entry. This guarantees that all packets queued using this entry have been dequeued, thus preserving in order delivery. Making each queue have its own rps_dev_flow table has two advantages: 1) the tail queue counters will be written on each receive, so keeping the table local to interrupting CPU s good for locality. 2) this allows lockless access to the table-- the CPU number and queue tail counter need to be accessed together under mutual exclusion from netif_receive_skb, we assume that this is only called from device napi_poll which is non-reentrant. This patch implements RFS for TCP and connected UDP sockets. It should be usable for other flow oriented protocols. There are two configuration parameters for RFS. The "rps_flow_entries" kernel init parameter sets the number of entries in the rps_sock_flow_table, the per rxqueue sysfs entry "rps_flow_cnt" contains the number of entries in the rps_dev_flow table for the rxqueue. Both are rounded to power of two. The obvious benefit of RFS (over just RPS) is that it achieves CPU locality between the receive processing for a flow and the applications processing; this can result in increased performance (higher pps, lower latency). The benefits of RFS are dependent on cache hierarchy, application load, and other factors. On simple benchmarks, we don't necessarily see improvement and sometimes see degradation. However, for more complex benchmarks and for applications where cache pressure is much higher this technique seems to perform very well. Below are some benchmark results which show the potential benfit of this patch. The netperf test has 500 instances of netperf TCP_RR test with 1 byte req. and resp. The RPC test is an request/response test similar in structure to netperf RR test ith 100 threads on each host, but does more work in userspace that netperf. e1000e on 8 core Intel No RFS or RPS 104K tps at 30% CPU No RFS (best RPS config): 290K tps at 63% CPU RFS 303K tps at 61% CPU RPC test tps CPU% 50/90/99% usec latency Latency StdDev No RFS/RPS 103K 48% 757/900/3185 4472.35 RPS only: 174K 73% 415/993/2468 491.66 RFS 223K 73% 379/651/1382 315.61 Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'include/net/inet_sock.h')
-rw-r--r--include/net/inet_sock.h38
1 files changed, 38 insertions, 0 deletions
diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h
index 83fd34437cf..b487bc1b99a 100644
--- a/include/net/inet_sock.h
+++ b/include/net/inet_sock.h
@@ -21,6 +21,7 @@
#include <linux/string.h>
#include <linux/types.h>
#include <linux/jhash.h>
+#include <linux/netdevice.h>
#include <net/flow.h>
#include <net/sock.h>
@@ -101,6 +102,7 @@ struct rtable;
* @uc_ttl - Unicast TTL
* @inet_sport - Source port
* @inet_id - ID counter for DF pkts
+ * @rxhash - flow hash received from netif layer
* @tos - TOS
* @mc_ttl - Multicasting TTL
* @is_icsk - is this an inet_connection_sock?
@@ -124,6 +126,9 @@ struct inet_sock {
__u16 cmsg_flags;
__be16 inet_sport;
__u16 inet_id;
+#ifdef CONFIG_RPS
+ __u32 rxhash;
+#endif
struct ip_options *opt;
__u8 tos;
@@ -219,4 +224,37 @@ static inline __u8 inet_sk_flowi_flags(const struct sock *sk)
return inet_sk(sk)->transparent ? FLOWI_FLAG_ANYSRC : 0;
}
+static inline void inet_rps_record_flow(const struct sock *sk)
+{
+#ifdef CONFIG_RPS
+ struct rps_sock_flow_table *sock_flow_table;
+
+ rcu_read_lock();
+ sock_flow_table = rcu_dereference(rps_sock_flow_table);
+ rps_record_sock_flow(sock_flow_table, inet_sk(sk)->rxhash);
+ rcu_read_unlock();
+#endif
+}
+
+static inline void inet_rps_reset_flow(const struct sock *sk)
+{
+#ifdef CONFIG_RPS
+ struct rps_sock_flow_table *sock_flow_table;
+
+ rcu_read_lock();
+ sock_flow_table = rcu_dereference(rps_sock_flow_table);
+ rps_reset_sock_flow(sock_flow_table, inet_sk(sk)->rxhash);
+ rcu_read_unlock();
+#endif
+}
+
+static inline void inet_rps_save_rxhash(const struct sock *sk, u32 rxhash)
+{
+#ifdef CONFIG_RPS
+ if (unlikely(inet_sk(sk)->rxhash != rxhash)) {
+ inet_rps_reset_flow(sk);
+ inet_sk(sk)->rxhash = rxhash;
+ }
+#endif
+}
#endif /* _INET_SOCK_H */