Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 182 insertions, 0 deletions

diff --git a/include/asm-v850/me2.h b/include/asm-v850/me2.h
new file mode 100644
index 00000000000..ac7c9ce0bdc
--- /dev/null
+++ b/include/asm-v850/me2.h
@@ -0,0 +1,182 @@
+/*
+ * include/asm-v850/me2.h -- V850E/ME2 cpu chip
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_ME2_H__
+#define __V850_ME2_H__
+
+#include <asm/v850e.h>
+#include <asm/v850e_cache.h>
+
+
+#define CPU_MODEL	"v850e/me2"
+#define CPU_MODEL_LONG	"NEC V850E/ME2"
+
+
+/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).  */
+#define IRQ_INTP(n)       (n) /* Pnnn (pin) interrupts */
+#define IRQ_INTP_NUM      31
+#define IRQ_INTCMD(n)     (0x31 + (n)) /* interval timer interrupts 0-3 */
+#define IRQ_INTCMD_NUM    4
+#define IRQ_INTDMA(n)     (0x41 + (n)) /* DMA interrupts 0-3 */
+#define IRQ_INTDMA_NUM    4
+#define IRQ_INTUBTIRE(n)  (0x49 + (n)*5)/* UARTB 0-1 reception error */
+#define IRQ_INTUBTIRE_NUM 2
+#define IRQ_INTUBTIR(n)   (0x4a + (n)*5) /* UARTB 0-1 reception complete */
+#define IRQ_INTUBTIR_NUM  2
+#define IRQ_INTUBTIT(n)   (0x4b + (n)*5) /* UARTB 0-1 transmission complete */
+#define IRQ_INTUBTIT_NUM  2
+#define IRQ_INTUBTIF(n)   (0x4c + (n)*5) /* UARTB 0-1 FIFO trans. complete */
+#define IRQ_INTUBTIF_NUM  2
+#define IRQ_INTUBTITO(n)  (0x4d + (n)*5) /* UARTB 0-1 reception timeout */
+#define IRQ_INTUBTITO_NUM 2
+
+/* For <asm/irq.h> */
+#define NUM_CPU_IRQS		0x59 /* V850E/ME2 */
+
+
+/* For <asm/entry.h> */
+/* We use on-chip RAM, for a few miscellaneous variables that must be
+   accessible using a load instruction relative to R0.  */
+#define R0_RAM_ADDR			0xFFFFB000 /* V850E/ME2 */
+
+
+/* V850E/ME2 UARTB details.*/
+#define V850E_UART_NUM_CHANNELS		2
+#define V850E_UARTB_BASE_FREQ		(CPU_CLOCK_FREQ / 4)
+
+/* This is a function that gets called before configuring the UART.  */
+#define V850E_UART_PRE_CONFIGURE	me2_uart_pre_configure
+#ifndef __ASSEMBLY__
+extern void me2_uart_pre_configure (unsigned chan,
+				    unsigned cflags, unsigned baud);
+#endif /* __ASSEMBLY__ */
+
+
+/* V850E/ME2 timer C details.  */
+#define V850E_TIMER_C_BASE_ADDR		0xFFFFF600
+
+
+/* V850E/ME2 timer D details.  */
+#define V850E_TIMER_D_BASE_ADDR		0xFFFFF540
+#define V850E_TIMER_D_TMD_BASE_ADDR	(V850E_TIMER_D_BASE_ADDR + 0x0)
+#define V850E_TIMER_D_CMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x2)
+#define V850E_TIMER_D_TMCD_BASE_ADDR	(V850E_TIMER_D_BASE_ADDR + 0x4)
+
+#define V850E_TIMER_D_BASE_FREQ		(CPU_CLOCK_FREQ / 2)
+
+
+/* Select iRAM mode.  */
+#define ME2_IRAMM_ADDR			0xFFFFF80A
+#define ME2_IRAMM			(*(volatile u8*)ME2_IRAMM_ADDR)
+
+
+/* Interrupt edge-detection configuration.  INTF(n) and INTR(n) are only
+   valid for n == 1, 2, or 5.  */
+#define ME2_INTF_ADDR(n)		(0xFFFFFC00 + (n) * 0x2)
+#define ME2_INTF(n)			(*(volatile u8*)ME2_INTF_ADDR(n))
+#define ME2_INTR_ADDR(n)		(0xFFFFFC20 + (n) * 0x2)
+#define ME2_INTR(n)			(*(volatile u8*)ME2_INTR_ADDR(n))
+#define ME2_INTFAL_ADDR			0xFFFFFC10
+#define ME2_INTFAL			(*(volatile u8*)ME2_INTFAL_ADDR)
+#define ME2_INTRAL_ADDR			0xFFFFFC30
+#define ME2_INTRAL			(*(volatile u8*)ME2_INTRAL_ADDR)
+#define ME2_INTFDH_ADDR			0xFFFFFC16
+#define ME2_INTFDH			(*(volatile u16*)ME2_INTFDH_ADDR)
+#define ME2_INTRDH_ADDR			0xFFFFFC36
+#define ME2_INTRDH			(*(volatile u16*)ME2_INTRDH_ADDR)
+#define ME2_SESC_ADDR(n)		(0xFFFFF609 + (n) * 0x10)
+#define ME2_SESC(n)			(*(volatile u8*)ME2_SESC_ADDR(n))
+#define ME2_SESA10_ADDR			0xFFFFF5AD
+#define ME2_SESA10			(*(volatile u8*)ME2_SESA10_ADDR)
+#define ME2_SESA11_ADDR			0xFFFFF5DD
+#define ME2_SESA11			(*(volatile u8*)ME2_SESA11_ADDR)
+
+
+/* Port 1 */
+/* Direct I/O.  Bits 0-3 are pins P10-P13.  */
+#define ME2_PORT1_IO_ADDR		0xFFFFF402
+#define ME2_PORT1_IO			(*(volatile u8 *)ME2_PORT1_IO_ADDR)
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define ME2_PORT1_PM_ADDR		0xFFFFF422
+#define ME2_PORT1_PM			(*(volatile u8 *)ME2_PORT1_PM_ADDR)
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
+#define ME2_PORT1_PMC_ADDR		0xFFFFF442
+#define ME2_PORT1_PMC			(*(volatile u8 *)ME2_PORT1_PMC_ADDR)
+/* Port function control (for serial interfaces, 0 = CSI30, 1 = UARTB0 ).  */
+#define ME2_PORT1_PFC_ADDR		0xFFFFF462
+#define ME2_PORT1_PFC			(*(volatile u8 *)ME2_PORT1_PFC_ADDR)
+
+/* Port 2 */
+/* Direct I/O.  Bits 0-3 are pins P20-P25.  */
+#define ME2_PORT2_IO_ADDR		0xFFFFF404
+#define ME2_PORT2_IO			(*(volatile u8 *)ME2_PORT2_IO_ADDR)
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define ME2_PORT2_PM_ADDR		0xFFFFF424
+#define ME2_PORT2_PM			(*(volatile u8 *)ME2_PORT2_PM_ADDR)
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
+#define ME2_PORT2_PMC_ADDR		0xFFFFF444
+#define ME2_PORT2_PMC			(*(volatile u8 *)ME2_PORT2_PMC_ADDR)
+/* Port function control (for serial interfaces, 0 = INTP2x, 1 = UARTB1 ).  */
+#define ME2_PORT2_PFC_ADDR		0xFFFFF464
+#define ME2_PORT2_PFC			(*(volatile u8 *)ME2_PORT2_PFC_ADDR)
+
+/* Port 5 */
+/* Direct I/O.  Bits 0-5 are pins P50-P55.  */
+#define ME2_PORT5_IO_ADDR		0xFFFFF40A
+#define ME2_PORT5_IO			(*(volatile u8 *)ME2_PORT5_IO_ADDR)
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define ME2_PORT5_PM_ADDR		0xFFFFF42A
+#define ME2_PORT5_PM			(*(volatile u8 *)ME2_PORT5_PM_ADDR)
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
+#define ME2_PORT5_PMC_ADDR		0xFFFFF44A
+#define ME2_PORT5_PMC			(*(volatile u8 *)ME2_PORT5_PMC_ADDR)
+/* Port function control ().  */
+#define ME2_PORT5_PFC_ADDR		0xFFFFF46A
+#define ME2_PORT5_PFC			(*(volatile u8 *)ME2_PORT5_PFC_ADDR)
+
+/* Port 6 */
+/* Direct I/O.  Bits 5-7 are pins P65-P67.  */
+#define ME2_PORT6_IO_ADDR		0xFFFFF40C
+#define ME2_PORT6_IO			(*(volatile u8 *)ME2_PORT6_IO_ADDR)
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define ME2_PORT6_PM_ADDR		0xFFFFF42C
+#define ME2_PORT6_PM			(*(volatile u8 *)ME2_PORT6_PM_ADDR)
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
+#define ME2_PORT6_PMC_ADDR		0xFFFFF44C
+#define ME2_PORT6_PMC			(*(volatile u8 *)ME2_PORT6_PMC_ADDR)
+/* Port function control ().  */
+#define ME2_PORT6_PFC_ADDR		0xFFFFF46C
+#define ME2_PORT6_PFC			(*(volatile u8 *)ME2_PORT6_PFC_ADDR)
+
+/* Port 7 */
+/* Direct I/O.  Bits 2-7 are pins P72-P77.  */
+#define ME2_PORT7_IO_ADDR		0xFFFFF40E
+#define ME2_PORT7_IO			(*(volatile u8 *)ME2_PORT7_IO_ADDR)
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define ME2_PORT7_PM_ADDR		0xFFFFF42E
+#define ME2_PORT7_PM			(*(volatile u8 *)ME2_PORT7_PM_ADDR)
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
+#define ME2_PORT7_PMC_ADDR		0xFFFFF44E
+#define ME2_PORT7_PMC			(*(volatile u8 *)ME2_PORT7_PMC_ADDR)
+/* Port function control ().  */
+#define ME2_PORT7_PFC_ADDR		0xFFFFF46E
+#define ME2_PORT7_PFC			(*(volatile u8 *)ME2_PORT7_PFC_ADDR)
+
+
+#ifndef __ASSEMBLY__
+/* Initialize V850E/ME2 chip interrupts.  */
+extern void me2_init_irqs (void);
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __V850_ME2_H__ */