sparc: join the remaining header files

With this commit all sparc64 header files are moved to asm-sparc.
The remaining files (71 files) were too different to be trivially
merged so divide them up in a _32.h and a _64.h file which
are both included from the file with no bit size.

The following script were used:
cd include
FILES=`wc -l asm-sparc64/*h | grep -v '^     1' | cut -b 20-`

for FILE in ${FILES}; do
  echo $FILE:
  BASE=`echo $FILE | cut -d '.' -f 1`
  FN32=${BASE}_32.h
  FN64=${BASE}_64.h
  GUARD=___ASM_SPARC_`echo $BASE | tr '-' '_' | tr [:lower:] [:upper:]`_H
  git mv asm-sparc/$FILE asm-sparc/$FN32
  git mv asm-sparc64/$FILE asm-sparc/$FN64
  echo git mv done
  printf "#ifndef %s\n" $GUARD                             >   asm-sparc/$FILE
  printf "#define %s\n" $GUARD                             >>  asm-sparc/$FILE
  printf "#if defined(__sparc__) && defined(__arch64__)\n" >>  asm-sparc/$FILE
  printf "#include <asm-sparc/%s>\n" $FN64                 >>  asm-sparc/$FILE
  printf "#else\n"                                         >>  asm-sparc/$FILE
  printf "#include <asm-sparc/%s>\n" $FN32                 >>  asm-sparc/$FILE
  printf "#endif\n"                                        >>  asm-sparc/$FILE
  printf "#endif\n"                                        >>  asm-sparc/$FILE
  git add asm-sparc/$FILE
  echo new file done
  printf "#include <asm-sparc/%s>\n" $FILE                 >  asm-sparc64/$FILE
  git add asm-sparc64/$FILE
  echo sparc64 file done
done

The guard contains three '_' to avoid conflict with existing guards.
In additing the two Kbuild files are emptied to avoid breaking
headers_* targets.
We will reintroduce the exported header files when the necessary
kbuild changes are merged.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 1 insertions, 355 deletions

diff --git a/include/asm-sparc64/system.h b/include/asm-sparc64/system.h
index 6897ac31be4..be2603c2e52 100644
--- a/include/asm-sparc64/system.h
+++ b/include/asm-sparc64/system.h
@@ -1,355 +1 @@
-#ifndef __SPARC64_SYSTEM_H
-#define __SPARC64_SYSTEM_H
-
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/visasm.h>
-
-#ifndef __ASSEMBLY__
-
-#include <linux/irqflags.h>
-#include <asm-generic/cmpxchg-local.h>
-
-/*
- * Sparc (general) CPU types
- */
-enum sparc_cpu {
-  sun4        = 0x00,
-  sun4c       = 0x01,
-  sun4m       = 0x02,
-  sun4d       = 0x03,
-  sun4e       = 0x04,
-  sun4u       = 0x05, /* V8 ploos ploos */
-  sun_unknown = 0x06,
-  ap1000      = 0x07, /* almost a sun4m */
-};
-                  
-#define sparc_cpu_model sun4u
-
-/* This cannot ever be a sun4c nor sun4 :) That's just history. */
-#define ARCH_SUN4C_SUN4 0
-#define ARCH_SUN4 0
-
-extern char reboot_command[];
-
-/* These are here in an effort to more fully work around Spitfire Errata
- * #51.  Essentially, if a memory barrier occurs soon after a mispredicted
- * branch, the chip can stop executing instructions until a trap occurs.
- * Therefore, if interrupts are disabled, the chip can hang forever.
- *
- * It used to be believed that the memory barrier had to be right in the
- * delay slot, but a case has been traced recently wherein the memory barrier
- * was one instruction after the branch delay slot and the chip still hung.
- * The offending sequence was the following in sym_wakeup_done() of the
- * sym53c8xx_2 driver:
- *
- *	call	sym_ccb_from_dsa, 0
- *	 movge	%icc, 0, %l0
- *	brz,pn	%o0, .LL1303
- *	 mov	%o0, %l2
- *	membar	#LoadLoad
- *
- * The branch has to be mispredicted for the bug to occur.  Therefore, we put
- * the memory barrier explicitly into a "branch always, predicted taken"
- * delay slot to avoid the problem case.
- */
-#define membar_safe(type) \
-do {	__asm__ __volatile__("ba,pt	%%xcc, 1f\n\t" \
-			     " membar	" type "\n" \
-			     "1:\n" \
-			     : : : "memory"); \
-} while (0)
-
-#define mb()	\
-	membar_safe("#LoadLoad | #LoadStore | #StoreStore | #StoreLoad")
-#define rmb()	\
-	membar_safe("#LoadLoad")
-#define wmb()	\
-	membar_safe("#StoreStore")
-#define membar_storeload() \
-	membar_safe("#StoreLoad")
-#define membar_storeload_storestore() \
-	membar_safe("#StoreLoad | #StoreStore")
-#define membar_storeload_loadload() \
-	membar_safe("#StoreLoad | #LoadLoad")
-#define membar_storestore_loadstore() \
-	membar_safe("#StoreStore | #LoadStore")
-
-#endif
-
-#define nop() 		__asm__ __volatile__ ("nop")
-
-#define read_barrier_depends()		do { } while(0)
-#define set_mb(__var, __value) \
-	do { __var = __value; membar_storeload_storestore(); } while(0)
-
-#ifdef CONFIG_SMP
-#define smp_mb()	mb()
-#define smp_rmb()	rmb()
-#define smp_wmb()	wmb()
-#define smp_read_barrier_depends()	read_barrier_depends()
-#else
-#define smp_mb()	__asm__ __volatile__("":::"memory")
-#define smp_rmb()	__asm__ __volatile__("":::"memory")
-#define smp_wmb()	__asm__ __volatile__("":::"memory")
-#define smp_read_barrier_depends()	do { } while(0)
-#endif
-
-#define flushi(addr)	__asm__ __volatile__ ("flush %0" : : "r" (addr) : "memory")
-
-#define flushw_all()	__asm__ __volatile__("flushw")
-
-/* Performance counter register access. */
-#define read_pcr(__p)  __asm__ __volatile__("rd	%%pcr, %0" : "=r" (__p))
-#define write_pcr(__p) __asm__ __volatile__("wr	%0, 0x0, %%pcr" : : "r" (__p))
-#define read_pic(__p)  __asm__ __volatile__("rd %%pic, %0" : "=r" (__p))
-
-/* Blackbird errata workaround.  See commentary in
- * arch/sparc64/kernel/smp.c:smp_percpu_timer_interrupt()
- * for more information.
- */
-#define reset_pic()    						\
-	__asm__ __volatile__("ba,pt	%xcc, 99f\n\t"		\
-			     ".align	64\n"			\
-			  "99:wr	%g0, 0x0, %pic\n\t"	\
-			     "rd	%pic, %g0")
-
-#ifndef __ASSEMBLY__
-
-extern void sun_do_break(void);
-extern int stop_a_enabled;
-
-extern void fault_in_user_windows(void);
-extern void synchronize_user_stack(void);
-
-extern void __flushw_user(void);
-#define flushw_user() __flushw_user()
-
-#define flush_user_windows flushw_user
-#define flush_register_windows flushw_all
-
-/* Don't hold the runqueue lock over context switch */
-#define __ARCH_WANT_UNLOCKED_CTXSW
-#define prepare_arch_switch(next)		\
-do {						\
-	flushw_all();				\
-} while (0)
-
-	/* See what happens when you design the chip correctly?
-	 *
-	 * We tell gcc we clobber all non-fixed-usage registers except
-	 * for l0/l1.  It will use one for 'next' and the other to hold
-	 * the output value of 'last'.  'next' is not referenced again
-	 * past the invocation of switch_to in the scheduler, so we need
-	 * not preserve it's value.  Hairy, but it lets us remove 2 loads
-	 * and 2 stores in this critical code path.  -DaveM
-	 */
-#define switch_to(prev, next, last)					\
-do {	if (test_thread_flag(TIF_PERFCTR)) {				\
-		unsigned long __tmp;					\
-		read_pcr(__tmp);					\
-		current_thread_info()->pcr_reg = __tmp;			\
-		read_pic(__tmp);					\
-		current_thread_info()->kernel_cntd0 += (unsigned int)(__tmp);\
-		current_thread_info()->kernel_cntd1 += ((__tmp) >> 32);	\
-	}								\
-	flush_tlb_pending();						\
-	save_and_clear_fpu();						\
-	/* If you are tempted to conditionalize the following */	\
-	/* so that ASI is only written if it changes, think again. */	\
-	__asm__ __volatile__("wr %%g0, %0, %%asi"			\
-	: : "r" (__thread_flag_byte_ptr(task_thread_info(next))[TI_FLAG_BYTE_CURRENT_DS]));\
-	trap_block[current_thread_info()->cpu].thread =			\
-		task_thread_info(next);					\
-	__asm__ __volatile__(						\
-	"mov	%%g4, %%g7\n\t"						\
-	"stx	%%i6, [%%sp + 2047 + 0x70]\n\t"				\
-	"stx	%%i7, [%%sp + 2047 + 0x78]\n\t"				\
-	"rdpr	%%wstate, %%o5\n\t"					\
-	"stx	%%o6, [%%g6 + %6]\n\t"					\
-	"stb	%%o5, [%%g6 + %5]\n\t"					\
-	"rdpr	%%cwp, %%o5\n\t"					\
-	"stb	%%o5, [%%g6 + %8]\n\t"					\
-	"mov	%4, %%g6\n\t"						\
-	"ldub	[%4 + %8], %%g1\n\t"					\
-	"wrpr	%%g1, %%cwp\n\t"					\
-	"ldx	[%%g6 + %6], %%o6\n\t"					\
-	"ldub	[%%g6 + %5], %%o5\n\t"					\
-	"ldub	[%%g6 + %7], %%o7\n\t"					\
-	"wrpr	%%o5, 0x0, %%wstate\n\t"				\
-	"ldx	[%%sp + 2047 + 0x70], %%i6\n\t"				\
-	"ldx	[%%sp + 2047 + 0x78], %%i7\n\t"				\
-	"ldx	[%%g6 + %9], %%g4\n\t"					\
-	"brz,pt %%o7, switch_to_pc\n\t"					\
-	" mov	%%g7, %0\n\t"						\
-	"sethi	%%hi(ret_from_syscall), %%g1\n\t"			\
-	"jmpl	%%g1 + %%lo(ret_from_syscall), %%g0\n\t"		\
-	" nop\n\t"							\
-	".globl switch_to_pc\n\t"					\
-	"switch_to_pc:\n\t"						\
-	: "=&r" (last), "=r" (current), "=r" (current_thread_info_reg),	\
-	  "=r" (__local_per_cpu_offset)					\
-	: "0" (task_thread_info(next)),					\
-	  "i" (TI_WSTATE), "i" (TI_KSP), "i" (TI_NEW_CHILD),            \
-	  "i" (TI_CWP), "i" (TI_TASK)					\
-	: "cc",								\
-	        "g1", "g2", "g3",                   "g7",		\
-	        "l1", "l2", "l3", "l4", "l5", "l6", "l7",		\
-	  "i0", "i1", "i2", "i3", "i4", "i5",				\
-	  "o0", "o1", "o2", "o3", "o4", "o5",       "o7");		\
-	/* If you fuck with this, update ret_from_syscall code too. */	\
-	if (test_thread_flag(TIF_PERFCTR)) {				\
-		write_pcr(current_thread_info()->pcr_reg);		\
-		reset_pic();						\
-	}								\
-} while(0)
-
-static inline unsigned long xchg32(__volatile__ unsigned int *m, unsigned int val)
-{
-	unsigned long tmp1, tmp2;
-
-	__asm__ __volatile__(
-"	membar		#StoreLoad | #LoadLoad\n"
-"	mov		%0, %1\n"
-"1:	lduw		[%4], %2\n"
-"	cas		[%4], %2, %0\n"
-"	cmp		%2, %0\n"
-"	bne,a,pn	%%icc, 1b\n"
-"	 mov		%1, %0\n"
-"	membar		#StoreLoad | #StoreStore\n"
-	: "=&r" (val), "=&r" (tmp1), "=&r" (tmp2)
-	: "0" (val), "r" (m)
-	: "cc", "memory");
-	return val;
-}
-
-static inline unsigned long xchg64(__volatile__ unsigned long *m, unsigned long val)
-{
-	unsigned long tmp1, tmp2;
-
-	__asm__ __volatile__(
-"	membar		#StoreLoad | #LoadLoad\n"
-"	mov		%0, %1\n"
-"1:	ldx		[%4], %2\n"
-"	casx		[%4], %2, %0\n"
-"	cmp		%2, %0\n"
-"	bne,a,pn	%%xcc, 1b\n"
-"	 mov		%1, %0\n"
-"	membar		#StoreLoad | #StoreStore\n"
-	: "=&r" (val), "=&r" (tmp1), "=&r" (tmp2)
-	: "0" (val), "r" (m)
-	: "cc", "memory");
-	return val;
-}
-
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-
-extern void __xchg_called_with_bad_pointer(void);
-
-static inline unsigned long __xchg(unsigned long x, __volatile__ void * ptr,
-				       int size)
-{
-	switch (size) {
-	case 4:
-		return xchg32(ptr, x);
-	case 8:
-		return xchg64(ptr, x);
-	};
-	__xchg_called_with_bad_pointer();
-	return x;
-}
-
-extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noreturn));
-
-/* 
- * Atomic compare and exchange.  Compare OLD with MEM, if identical,
- * store NEW in MEM.  Return the initial value in MEM.  Success is
- * indicated by comparing RETURN with OLD.
- */
-
-#define __HAVE_ARCH_CMPXCHG 1
-
-static inline unsigned long
-__cmpxchg_u32(volatile int *m, int old, int new)
-{
-	__asm__ __volatile__("membar #StoreLoad | #LoadLoad\n"
-			     "cas [%2], %3, %0\n\t"
-			     "membar #StoreLoad | #StoreStore"
-			     : "=&r" (new)
-			     : "0" (new), "r" (m), "r" (old)
-			     : "memory");
-
-	return new;
-}
-
-static inline unsigned long
-__cmpxchg_u64(volatile long *m, unsigned long old, unsigned long new)
-{
-	__asm__ __volatile__("membar #StoreLoad | #LoadLoad\n"
-			     "casx [%2], %3, %0\n\t"
-			     "membar #StoreLoad | #StoreStore"
-			     : "=&r" (new)
-			     : "0" (new), "r" (m), "r" (old)
-			     : "memory");
-
-	return new;
-}
-
-/* This function doesn't exist, so you'll get a linker error
-   if something tries to do an invalid cmpxchg().  */
-extern void __cmpxchg_called_with_bad_pointer(void);
-
-static inline unsigned long
-__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
-{
-	switch (size) {
-		case 4:
-			return __cmpxchg_u32(ptr, old, new);
-		case 8:
-			return __cmpxchg_u64(ptr, old, new);
-	}
-	__cmpxchg_called_with_bad_pointer();
-	return old;
-}
-
-#define cmpxchg(ptr,o,n)						 \
-  ({									 \
-     __typeof__(*(ptr)) _o_ = (o);					 \
-     __typeof__(*(ptr)) _n_ = (n);					 \
-     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
-				    (unsigned long)_n_, sizeof(*(ptr))); \
-  })
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-
-static inline unsigned long __cmpxchg_local(volatile void *ptr,
-				      unsigned long old,
-				      unsigned long new, int size)
-{
-	switch (size) {
-	case 4:
-	case 8:	return __cmpxchg(ptr, old, new, size);
-	default:
-		return __cmpxchg_local_generic(ptr, old, new, size);
-	}
-
-	return old;
-}
-
-#define cmpxchg_local(ptr, o, n)				  	\
-	((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o),	\
-			(unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n)					\
-  ({									\
-	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
-	cmpxchg_local((ptr), (o), (n));					\
-  })
-
-#endif /* !(__ASSEMBLY__) */
-
-#define arch_align_stack(x) (x)
-
-#endif /* !(__SPARC64_SYSTEM_H) */
+#include <asm-sparc/system.h>