sparc: join the remaining header files

With this commit all sparc64 header files are moved to asm-sparc.
The remaining files (71 files) were too different to be trivially
merged so divide them up in a _32.h and a _64.h file which
are both included from the file with no bit size.

The following script were used:
cd include
FILES=`wc -l asm-sparc64/*h | grep -v '^     1' | cut -b 20-`

for FILE in ${FILES}; do
  echo $FILE:
  BASE=`echo $FILE | cut -d '.' -f 1`
  FN32=${BASE}_32.h
  FN64=${BASE}_64.h
  GUARD=___ASM_SPARC_`echo $BASE | tr '-' '_' | tr [:lower:] [:upper:]`_H
  git mv asm-sparc/$FILE asm-sparc/$FN32
  git mv asm-sparc64/$FILE asm-sparc/$FN64
  echo git mv done
  printf "#ifndef %s\n" $GUARD                             >   asm-sparc/$FILE
  printf "#define %s\n" $GUARD                             >>  asm-sparc/$FILE
  printf "#if defined(__sparc__) && defined(__arch64__)\n" >>  asm-sparc/$FILE
  printf "#include <asm-sparc/%s>\n" $FN64                 >>  asm-sparc/$FILE
  printf "#else\n"                                         >>  asm-sparc/$FILE
  printf "#include <asm-sparc/%s>\n" $FN32                 >>  asm-sparc/$FILE
  printf "#endif\n"                                        >>  asm-sparc/$FILE
  printf "#endif\n"                                        >>  asm-sparc/$FILE
  git add asm-sparc/$FILE
  echo new file done
  printf "#include <asm-sparc/%s>\n" $FILE                 >  asm-sparc64/$FILE
  git add asm-sparc64/$FILE
  echo sparc64 file done
done

The guard contains three '_' to avoid conflict with existing guards.
In additing the two Kbuild files are emptied to avoid breaking
headers_* targets.
We will reintroduce the exported header files when the necessary
kbuild changes are merged.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 6 insertions, 100 deletions

diff --git a/include/asm-sparc/head.h b/include/asm-sparc/head.h
index 7c35491a8b5..14652abdea3 100644
--- a/include/asm-sparc/head.h
+++ b/include/asm-sparc/head.h
@@ -1,102 +1,8 @@
-#ifndef __SPARC_HEAD_H
-#define __SPARC_HEAD_H
-
-#define KERNBASE        0xf0000000  /* First address the kernel will eventually be */
-#define LOAD_ADDR       0x4000      /* prom jumps to us here unless this is elf /boot */
-#define SUN4C_SEGSZ     (1 << 18)
-#define SRMMU_L1_KBASE_OFFSET ((KERNBASE>>24)<<2)  /* Used in boot remapping. */
-#define INTS_ENAB        0x01           /* entry.S uses this. */
-
-#define SUN4_PROM_VECTOR 0xFFE81000     /* SUN4 PROM needs to be hardwired */
-
-#define WRITE_PAUSE      nop; nop; nop; /* Have to do this after %wim/%psr chg */
-#define NOP_INSN         0x01000000     /* Used to patch sparc_save_state */
-
-/* Here are some trap goodies */
-
-/* Generic trap entry. */
-#define TRAP_ENTRY(type, label) \
-	rd %psr, %l0; b label; rd %wim, %l3; nop;
-
-/* Data/text faults. Defaults to sun4c version at boot time. */
-#define SPARC_TFAULT rd %psr, %l0; rd %wim, %l3; b sun4c_fault; mov 1, %l7;
-#define SPARC_DFAULT rd %psr, %l0; rd %wim, %l3; b sun4c_fault; mov 0, %l7;
-#define SRMMU_TFAULT rd %psr, %l0; rd %wim, %l3; b srmmu_fault; mov 1, %l7;
-#define SRMMU_DFAULT rd %psr, %l0; rd %wim, %l3; b srmmu_fault; mov 0, %l7;
-
-/* This is for traps we should NEVER get. */
-#define BAD_TRAP(num) \
-        rd %psr, %l0; mov num, %l7; b bad_trap_handler; rd %wim, %l3;
-
-/* This is for traps when we want just skip the instruction which caused it */
-#define SKIP_TRAP(type, name) \
-	jmpl %l2, %g0; rett %l2 + 4; nop; nop;
-
-/* Notice that for the system calls we pull a trick.  We load up a
- * different pointer to the system call vector table in %l7, but call
- * the same generic system call low-level entry point.  The trap table
- * entry sequences are also HyperSparc pipeline friendly ;-)
- */
-
-/* Software trap for Linux system calls. */
-#define LINUX_SYSCALL_TRAP \
-        sethi %hi(sys_call_table), %l7; \
-        or %l7, %lo(sys_call_table), %l7; \
-        b linux_sparc_syscall; \
-        rd %psr, %l0;
-
-#define BREAKPOINT_TRAP \
-	b breakpoint_trap; \
-	rd %psr,%l0; \
-	nop; \
-	nop;
-
-#ifdef CONFIG_KGDB
-#define KGDB_TRAP(num) \
-	b kgdb_trap_low; \
-	rd %psr,%l0; \
-	nop; \
-	nop;
+#ifndef ___ASM_SPARC_HEAD_H
+#define ___ASM_SPARC_HEAD_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm-sparc/head_64.h>
 #else
-#define KGDB_TRAP(num) \
-	BAD_TRAP(num)
+#include <asm-sparc/head_32.h>
+#endif
 #endif
-
-/* The Get Condition Codes software trap for userland. */
-#define GETCC_TRAP \
-        b getcc_trap_handler; mov %psr, %l0; nop; nop;
-
-/* The Set Condition Codes software trap for userland. */
-#define SETCC_TRAP \
-        b setcc_trap_handler; mov %psr, %l0; nop; nop;
-
-/* The Get PSR software trap for userland. */
-#define GETPSR_TRAP \
-	mov %psr, %i0; jmp %l2; rett %l2 + 4; nop;
-
-/* This is for hard interrupts from level 1-14, 15 is non-maskable (nmi) and
- * gets handled with another macro.
- */
-#define TRAP_ENTRY_INTERRUPT(int_level) \
-        mov int_level, %l7; rd %psr, %l0; b real_irq_entry; rd %wim, %l3;
-
-/* NMI's (Non Maskable Interrupts) are special, you can't keep them
- * from coming in, and basically if you get one, the shows over. ;(
- * On the sun4c they are usually asynchronous memory errors, on the
- * the sun4m they could be either due to mem errors or a software
- * initiated interrupt from the prom/kern on an SMP box saying "I
- * command you to do CPU tricks, read your mailbox for more info."
- */
-#define NMI_TRAP \
-        rd %wim, %l3; b linux_trap_nmi_sun4c; mov %psr, %l0; nop;
-
-/* Window overflows/underflows are special and we need to try to be as
- * efficient as possible here....
- */
-#define WINDOW_SPILL \
-        rd %psr, %l0; rd %wim, %l3; b spill_window_entry; andcc %l0, PSR_PS, %g0;
-
-#define WINDOW_FILL \
-        rd %psr, %l0; rd %wim, %l3; b fill_window_entry; andcc %l0, PSR_PS, %g0;
-
-#endif /* __SPARC_HEAD_H */