sh: Board updates for I/O routine rework.

This updates the various boards for some of the recent I/O routine
updates.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 0 insertions, 92 deletions

diff --git a/include/asm-sh/snapgear/io.h b/include/asm-sh/snapgear/io.h
deleted file mode 100644
index bfa97ac0628..00000000000
--- a/include/asm-sh/snapgear/io.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * include/asm-sh/snapgear/io.h
- *
- * Modified version of io_se.h for the snapgear-specific functions.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * IO functions for a SnapGear
- */
-
-#ifndef _ASM_SH_IO_SNAPGEAR_H
-#define _ASM_SH_IO_SNAPGEAR_H
-
-#if defined(CONFIG_CPU_SH4)
-/*
- * The external interrupt lines, these take up ints 0 - 15 inclusive
- * depending on the priority for the interrupt.  In fact the priority
- * is the interrupt :-)
- */
-
-#define IRL0_IRQ		2
-#define IRL0_IPR_ADDR	INTC_IPRD
-#define IRL0_IPR_POS	3
-#define IRL0_PRIORITY	13
-
-#define IRL1_IRQ		5
-#define IRL1_IPR_ADDR	INTC_IPRD
-#define IRL1_IPR_POS	2
-#define IRL1_PRIORITY	10
-
-#define IRL2_IRQ		8
-#define IRL2_IPR_ADDR	INTC_IPRD
-#define IRL2_IPR_POS	1
-#define IRL2_PRIORITY	7
-
-#define IRL3_IRQ		11
-#define IRL3_IPR_ADDR	INTC_IPRD
-#define IRL3_IPR_POS	0
-#define IRL3_PRIORITY	4
-#endif
-
-extern unsigned char snapgear_inb(unsigned long port);
-extern unsigned short snapgear_inw(unsigned long port);
-extern unsigned int snapgear_inl(unsigned long port);
-
-extern void snapgear_outb(unsigned char value, unsigned long port);
-extern void snapgear_outw(unsigned short value, unsigned long port);
-extern void snapgear_outl(unsigned int value, unsigned long port);
-
-extern unsigned char snapgear_inb_p(unsigned long port);
-extern void snapgear_outb_p(unsigned char value, unsigned long port);
-
-extern void snapgear_insl(unsigned long port, void *addr, unsigned long count);
-extern void snapgear_outsl(unsigned long port, const void *addr, unsigned long count);
-
-extern unsigned long snapgear_isa_port2addr(unsigned long offset);
-
-#ifdef CONFIG_SH_SECUREEDGE5410
-/*
- * We need to remember what was written to the ioport as some bits
- * are shared with other functions and you cannot read back what was
- * written :-|
- *
- * Bit        Read                   Write
- * -----------------------------------------------
- * D0         DCD on ttySC1          power
- * D1         Reset Switch           heatbeat
- * D2         ttySC0 CTS (7100)      LAN
- * D3         -                      WAN
- * D4         ttySC0 DCD (7100)      CONSOLE
- * D5         -                      ONLINE
- * D6         -                      VPN
- * D7         -                      DTR on ttySC1
- * D8         -                      ttySC0 RTS (7100)
- * D9         -                      ttySC0 DTR (7100)
- * D10        -                      RTC SCLK
- * D11        RTC DATA               RTC DATA
- * D12        -                      RTS RESET
- */
-
- #define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000)
- extern unsigned short secureedge5410_ioport;
-
- #define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \
-		 (secureedge5410_ioport = \
-		 		((secureedge5410_ioport & ~(mask)) | ((val) & (mask)))))
- #define SECUREEDGE_READ_IOPORT() \
- 		 ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817))
-#endif
-
-#endif /* _ASM_SH_IO_SNAPGEAR_H */