[PATCH] powerpc: Move more ppc64 files with no ppc32 equivalent to powerpc

This patch moves a bunch more files from arch/ppc64 and
include/asm-ppc64 which have no equivalents in ppc32 code into
arch/powerpc and include/asm-powerpc.  The file affected are:
	hvcall.h
	proc_ppc64.c
	sysfs.c
	lparcfg.c
	rtas_pci.c

The only changes apart from the move and corresponding Makefile
changes are:
	- #ifndef/#define in includes updated to _ASM_POWERPC_ form
	- trailing whitespace removed
	- comments giving full paths removed

Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64), built
for 32-bit powermac (ARCH=powerpc).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 0 insertions, 173 deletions

diff --git a/include/asm-ppc64/hvcall.h b/include/asm-ppc64/hvcall.h
deleted file mode 100644
index ab7c3cf2488..00000000000
--- a/include/asm-ppc64/hvcall.h
+++ /dev/null
@@ -1,173 +0,0 @@
-#ifndef _PPC64_HVCALL_H
-#define _PPC64_HVCALL_H
-
-#define HVSC			.long 0x44000022
-
-#define H_Success	0
-#define H_Busy		1	/* Hardware busy -- retry later */
-#define H_Constrained	4	/* Resource request constrained to max allowed */
-#define H_LongBusyStartRange   9900  /* Start of long busy range */
-#define H_LongBusyOrder1msec   9900  /* Long busy, hint that 1msec is a good time to retry */
-#define H_LongBusyOrder10msec  9901  /* Long busy, hint that 10msec is a good time to retry */
-#define H_LongBusyOrder100msec 9902  /* Long busy, hint that 100msec is a good time to retry */
-#define H_LongBusyOrder1sec    9903  /* Long busy, hint that 1sec is a good time to retry */
-#define H_LongBusyOrder10sec   9904  /* Long busy, hint that 10sec is a good time to retry */
-#define H_LongBusyOrder100sec  9905  /* Long busy, hint that 100sec is a good time to retry */
-#define H_LongBusyEndRange     9905  /* End of long busy range */
-#define H_Hardware	-1	/* Hardware error */
-#define H_Function	-2	/* Function not supported */
-#define H_Privilege	-3	/* Caller not privileged */
-#define H_Parameter	-4	/* Parameter invalid, out-of-range or conflicting */
-#define H_Bad_Mode	-5	/* Illegal msr value */
-#define H_PTEG_Full	-6	/* PTEG is full */
-#define H_Not_Found	-7	/* PTE was not found" */
-#define H_Reserved_DABR	-8	/* DABR address is reserved by the hypervisor on this processor" */
-#define H_NoMem                 -9
-#define H_Authority            -10
-#define H_Permission           -11
-#define H_Dropped              -12
-#define H_SourceParm           -13
-#define H_DestParm             -14
-#define H_RemoteParm           -15
-#define H_Resource             -16
-
-/* Long Busy is a condition that can be returned by the firmware
- * when a call cannot be completed now, but the identical call
- * should be retried later.  This prevents calls blocking in the
- * firmware for long periods of time. Annoyingly the firmware can return
- * a range of return codes, hinting at how long we should wait before
- * retrying.  If you don't care for the hint, the macro below is a good
- * way to check for the long_busy return codes
- */
-#define H_isLongBusy(x)  ((x >= H_LongBusyStartRange) && (x <= H_LongBusyEndRange))
-
-/* Flags */
-#define H_LARGE_PAGE		(1UL<<(63-16))
-#define H_EXACT			(1UL<<(63-24))	/* Use exact PTE or return H_PTEG_FULL */
-#define H_R_XLATE		(1UL<<(63-25))	/* include a valid logical page num in the pte if the valid bit is set */
-#define H_READ_4		(1UL<<(63-26))	/* Return 4 PTEs */
-#define H_AVPN			(1UL<<(63-32))	/* An avpn is provided as a sanity test */
-#define H_ANDCOND		(1UL<<(63-33))
-#define H_ICACHE_INVALIDATE	(1UL<<(63-40))	/* icbi, etc.  (ignored for IO pages) */
-#define H_ICACHE_SYNCHRONIZE	(1UL<<(63-41))	/* dcbst, icbi, etc (ignored for IO pages */
-#define H_ZERO_PAGE		(1UL<<(63-48))	/* zero the page before mapping (ignored for IO pages) */
-#define H_COPY_PAGE		(1UL<<(63-49))
-#define H_N			(1UL<<(63-61))
-#define H_PP1			(1UL<<(63-62))
-#define H_PP2			(1UL<<(63-63))
-
-/* DABRX flags */
-#define H_DABRX_HYPERVISOR	(1UL<<(63-61))
-#define H_DABRX_KERNEL		(1UL<<(63-62))
-#define H_DABRX_USER		(1UL<<(63-63))
-
-/* pSeries hypervisor opcodes */
-#define H_REMOVE		0x04
-#define H_ENTER			0x08
-#define H_READ			0x0c
-#define H_CLEAR_MOD		0x10
-#define H_CLEAR_REF		0x14
-#define H_PROTECT		0x18
-#define H_GET_TCE		0x1c
-#define H_PUT_TCE		0x20
-#define H_SET_SPRG0		0x24
-#define H_SET_DABR		0x28
-#define H_PAGE_INIT		0x2c
-#define H_SET_ASR		0x30
-#define H_ASR_ON		0x34
-#define H_ASR_OFF		0x38
-#define H_LOGICAL_CI_LOAD	0x3c
-#define H_LOGICAL_CI_STORE	0x40
-#define H_LOGICAL_CACHE_LOAD	0x44
-#define H_LOGICAL_CACHE_STORE	0x48
-#define H_LOGICAL_ICBI		0x4c
-#define H_LOGICAL_DCBF		0x50
-#define H_GET_TERM_CHAR		0x54
-#define H_PUT_TERM_CHAR		0x58
-#define H_REAL_TO_LOGICAL	0x5c
-#define H_HYPERVISOR_DATA	0x60
-#define H_EOI			0x64
-#define H_CPPR			0x68
-#define H_IPI			0x6c
-#define H_IPOLL			0x70
-#define H_XIRR			0x74
-#define H_PERFMON		0x7c
-#define H_MIGRATE_DMA		0x78
-#define H_REGISTER_VPA		0xDC
-#define H_CEDE		        0xE0
-#define H_CONFER		0xE4
-#define H_PROD		        0xE8
-#define H_GET_PPP		0xEC
-#define H_SET_PPP		0xF0
-#define H_PURR			0xF4
-#define H_PIC		        0xF8
-#define H_REG_CRQ		0xFC
-#define H_FREE_CRQ		0x100
-#define H_VIO_SIGNAL		0x104
-#define H_SEND_CRQ		0x108
-#define H_COPY_RDMA             0x110
-#define H_SET_XDABR		0x134
-#define H_STUFF_TCE		0x138
-#define H_PUT_TCE_INDIRECT	0x13C
-#define H_VTERM_PARTNER_INFO	0x150
-#define H_REGISTER_VTERM	0x154
-#define H_FREE_VTERM		0x158
-#define H_POLL_PENDING	        0x1D8
-
-#ifndef __ASSEMBLY__
-
-/* plpar_hcall() -- Generic call interface using above opcodes
- *
- * The actual call interface is a hypervisor call instruction with
- * the opcode in R3 and input args in R4-R7.
- * Status is returned in R3 with variable output values in R4-R11.
- * Only H_PTE_READ with H_READ_4 uses R6-R11 so we ignore it for now
- * and return only two out args which MUST ALWAYS BE PROVIDED.
- */
-long plpar_hcall(unsigned long opcode,
-		 unsigned long arg1,
-		 unsigned long arg2,
-		 unsigned long arg3,
-		 unsigned long arg4,
-		 unsigned long *out1,
-		 unsigned long *out2,
-		 unsigned long *out3);
-
-/* Same as plpar_hcall but for those opcodes that return no values
- * other than status.  Slightly more efficient.
- */
-long plpar_hcall_norets(unsigned long opcode, ...);
-
-/* 
- * Special hcall interface for ibmveth support.
- * Takes 8 input parms. Returns a rc and stores the
- * R4 return value in *out1.
- */
-long plpar_hcall_8arg_2ret(unsigned long opcode,
-			   unsigned long arg1,
-		  	   unsigned long arg2,
-			   unsigned long arg3,
-			   unsigned long arg4,
-			   unsigned long arg5,
-			   unsigned long arg6,
-			   unsigned long arg7,
-			   unsigned long arg8,
-			   unsigned long *out1);
- 
-/* plpar_hcall_4out()
- *
- * same as plpar_hcall except with 4 output arguments.  
- * 
- */
-long plpar_hcall_4out(unsigned long opcode,
-		      unsigned long arg1,
-		      unsigned long arg2,
-		      unsigned long arg3,
-		      unsigned long arg4,
-		      unsigned long *out1,
-		      unsigned long *out2,
-		      unsigned long *out3,
-		      unsigned long *out4);
-
-#endif /* __ASSEMBLY__ */
-#endif /* _PPC64_HVCALL_H */