[MIPS] Cleanup memory barriers for weakly ordered systems.

Also the R4000 / R4600 LL/SC instructions imply a sync so no explicit sync
needed.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 10 insertions, 146 deletions

diff --git a/include/asm-mips/system.h b/include/asm-mips/system.h
index 3056feed5a3..9428057a50c 100644
--- a/include/asm-mips/system.h
+++ b/include/asm-mips/system.h
@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003, 06 by Ralf Baechle
  * Copyright (C) 1996 by Paul M. Antoine
  * Copyright (C) 1999 Silicon Graphics
  * Kevin D. Kissell, kevink@mips.org and Carsten Langgaard, carstenl@mips.com
@@ -16,132 +16,12 @@
 #include <linux/irqflags.h>
 
 #include <asm/addrspace.h>
+#include <asm/barrier.h>
 #include <asm/cpu-features.h>
 #include <asm/dsp.h>
 #include <asm/ptrace.h>
 #include <asm/war.h>
 
-/*
- * read_barrier_depends - Flush all pending reads that subsequents reads
- * depend on.
- *
- * No data-dependent reads from memory-like regions are ever reordered
- * over this barrier.  All reads preceding this primitive are guaranteed
- * to access memory (but not necessarily other CPUs' caches) before any
- * reads following this primitive that depend on the data return by
- * any of the preceding reads.  This primitive is much lighter weight than
- * rmb() on most CPUs, and is never heavier weight than is
- * rmb().
- *
- * These ordering constraints are respected by both the local CPU
- * and the compiler.
- *
- * Ordering is not guaranteed by anything other than these primitives,
- * not even by data dependencies.  See the documentation for
- * memory_barrier() for examples and URLs to more information.
- *
- * For example, the following code would force ordering (the initial
- * value of "a" is zero, "b" is one, and "p" is "&a"):
- *
- * <programlisting>
- *	CPU 0				CPU 1
- *
- *	b = 2;
- *	memory_barrier();
- *	p = &b;				q = p;
- *					read_barrier_depends();
- *					d = *q;
- * </programlisting>
- *
- * because the read of "*q" depends on the read of "p" and these
- * two reads are separated by a read_barrier_depends().  However,
- * the following code, with the same initial values for "a" and "b":
- *
- * <programlisting>
- *	CPU 0				CPU 1
- *
- *	a = 2;
- *	memory_barrier();
- *	b = 3;				y = b;
- *					read_barrier_depends();
- *					x = a;
- * </programlisting>
- *
- * does not enforce ordering, since there is no data dependency between
- * the read of "a" and the read of "b".  Therefore, on some CPUs, such
- * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
- * in cases like this where there are no data dependencies.
- */
-
-#define read_barrier_depends()	do { } while(0)
-
-#ifdef CONFIG_CPU_HAS_SYNC
-#define __sync()				\
-	__asm__ __volatile__(			\
-		".set	push\n\t"		\
-		".set	noreorder\n\t"		\
-		".set	mips2\n\t"		\
-		"sync\n\t"			\
-		".set	pop"			\
-		: /* no output */		\
-		: /* no input */		\
-		: "memory")
-#else
-#define __sync()	do { } while(0)
-#endif
-
-#define __fast_iob()				\
-	__asm__ __volatile__(			\
-		".set	push\n\t"		\
-		".set	noreorder\n\t"		\
-		"lw	$0,%0\n\t"		\
-		"nop\n\t"			\
-		".set	pop"			\
-		: /* no output */		\
-		: "m" (*(int *)CKSEG1)		\
-		: "memory")
-
-#define fast_wmb()	__sync()
-#define fast_rmb()	__sync()
-#define fast_mb()	__sync()
-#define fast_iob()				\
-	do {					\
-		__sync();			\
-		__fast_iob();			\
-	} while (0)
-
-#ifdef CONFIG_CPU_HAS_WB
-
-#include <asm/wbflush.h>
-
-#define wmb()		fast_wmb()
-#define rmb()		fast_rmb()
-#define mb()		wbflush()
-#define iob()		wbflush()
-
-#else /* !CONFIG_CPU_HAS_WB */
-
-#define wmb()		fast_wmb()
-#define rmb()		fast_rmb()
-#define mb()		fast_mb()
-#define iob()		fast_iob()
-
-#endif /* !CONFIG_CPU_HAS_WB */
-
-#ifdef CONFIG_SMP
-#define smp_mb()	mb()
-#define smp_rmb()	rmb()
-#define smp_wmb()	wmb()
-#define smp_read_barrier_depends()	read_barrier_depends()
-#else
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-#define smp_read_barrier_depends()	do { } while(0)
-#endif
-
-#define set_mb(var, value) \
-do { var = value; mb(); } while (0)
 
 /*
  * switch_to(n) should switch tasks to task nr n, first
@@ -217,9 +97,6 @@ static inline unsigned long __xchg_u32(volatile int * m, unsigned int val)
 		"	.set	mips3					\n"
 		"	sc	%2, %1					\n"
 		"	beqzl	%2, 1b					\n"
-#ifdef CONFIG_SMP
-		"	sync						\n"
-#endif
 		"	.set	mips0					\n"
 		: "=&r" (retval), "=m" (*m), "=&r" (dummy)
 		: "R" (*m), "Jr" (val)
@@ -235,9 +112,6 @@ static inline unsigned long __xchg_u32(volatile int * m, unsigned int val)
 		"	.set	mips3					\n"
 		"	sc	%2, %1					\n"
 		"	beqz	%2, 1b					\n"
-#ifdef CONFIG_SMP
-		"	sync						\n"
-#endif
 		"	.set	mips0					\n"
 		: "=&r" (retval), "=m" (*m), "=&r" (dummy)
 		: "R" (*m), "Jr" (val)
@@ -251,6 +125,8 @@ static inline unsigned long __xchg_u32(volatile int * m, unsigned int val)
 		local_irq_restore(flags);	/* implies memory barrier  */
 	}
 
+	smp_mb();
+
 	return retval;
 }
 
@@ -268,9 +144,6 @@ static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val)
 		"	move	%2, %z4					\n"
 		"	scd	%2, %1					\n"
 		"	beqzl	%2, 1b					\n"
-#ifdef CONFIG_SMP
-		"	sync						\n"
-#endif
 		"	.set	mips0					\n"
 		: "=&r" (retval), "=m" (*m), "=&r" (dummy)
 		: "R" (*m), "Jr" (val)
@@ -284,9 +157,6 @@ static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val)
 		"	move	%2, %z4					\n"
 		"	scd	%2, %1					\n"
 		"	beqz	%2, 1b					\n"
-#ifdef CONFIG_SMP
-		"	sync						\n"
-#endif
 		"	.set	mips0					\n"
 		: "=&r" (retval), "=m" (*m), "=&r" (dummy)
 		: "R" (*m), "Jr" (val)
@@ -300,6 +170,8 @@ static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val)
 		local_irq_restore(flags);	/* implies memory barrier  */
 	}
 
+	smp_mb();
+
 	return retval;
 }
 #else
@@ -345,9 +217,6 @@ static inline unsigned long __cmpxchg_u32(volatile int * m, unsigned long old,
 		"	.set	mips3					\n"
 		"	sc	$1, %1					\n"
 		"	beqzl	$1, 1b					\n"
-#ifdef CONFIG_SMP
-		"	sync						\n"
-#endif
 		"2:							\n"
 		"	.set	pop					\n"
 		: "=&r" (retval), "=R" (*m)
@@ -365,9 +234,6 @@ static inline unsigned long __cmpxchg_u32(volatile int * m, unsigned long old,
 		"	.set	mips3					\n"
 		"	sc	$1, %1					\n"
 		"	beqz	$1, 1b					\n"
-#ifdef CONFIG_SMP
-		"	sync						\n"
-#endif
 		"2:							\n"
 		"	.set	pop					\n"
 		: "=&r" (retval), "=R" (*m)
@@ -383,6 +249,8 @@ static inline unsigned long __cmpxchg_u32(volatile int * m, unsigned long old,
 		local_irq_restore(flags);	/* implies memory barrier  */
 	}
 
+	smp_mb();
+
 	return retval;
 }
 
@@ -402,9 +270,6 @@ static inline unsigned long __cmpxchg_u64(volatile int * m, unsigned long old,
 		"	move	$1, %z4					\n"
 		"	scd	$1, %1					\n"
 		"	beqzl	$1, 1b					\n"
-#ifdef CONFIG_SMP
-		"	sync						\n"
-#endif
 		"2:							\n"
 		"	.set	pop					\n"
 		: "=&r" (retval), "=R" (*m)
@@ -420,9 +285,6 @@ static inline unsigned long __cmpxchg_u64(volatile int * m, unsigned long old,
 		"	move	$1, %z4					\n"
 		"	scd	$1, %1					\n"
 		"	beqz	$1, 1b					\n"
-#ifdef CONFIG_SMP
-		"	sync						\n"
-#endif
 		"2:							\n"
 		"	.set	pop					\n"
 		: "=&r" (retval), "=R" (*m)
@@ -438,6 +300,8 @@ static inline unsigned long __cmpxchg_u64(volatile int * m, unsigned long old,
 		local_irq_restore(flags);	/* implies memory barrier  */
 	}
 
+	smp_mb();
+
 	return retval;
 }
 #else