diff options
| author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
| commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
| tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /include/asm-arm/arch-s3c2410 | |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'include/asm-arm/arch-s3c2410')
43 files changed, 4856 insertions, 0 deletions
diff --git a/include/asm-arm/arch-s3c2410/bast-cpld.h b/include/asm-arm/arch-s3c2410/bast-cpld.h new file mode 100644 index 00000000000..e28ca51a497 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/bast-cpld.h @@ -0,0 +1,58 @@ +/* linux/include/asm-arm/arch-s3c2410/bast-cpld.h + * + * (c) 2003,2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * BAST - CPLD control constants + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 25-May-2003 BJD Created file, added CTRL1 registers + * 30-Aug-2004 BJD Updated definitions from 2.4.26 port + * 30-Aug-2004 BJD Added CTRL3 and CTRL4 definitions +*/ + +#ifndef __ASM_ARCH_BASTCPLD_H +#define __ASM_ARCH_BASTCPLD_H + +/* CTRL1 - Audio LR routing */ + +#define BAST_CPLD_CTRL1_LRCOFF (0x00) +#define BAST_CPLD_CTRL1_LRCADC (0x01) +#define BAST_CPLD_CTRL1_LRCDAC (0x02) +#define BAST_CPLD_CTRL1_LRCARM (0x03) +#define BAST_CPLD_CTRL1_LRMASK (0x03) + +/* CTRL2 - NAND WP control, IDE Reset assert/check */ + +#define BAST_CPLD_CTRL2_WNAND (0x04) +#define BAST_CPLD_CTLR2_IDERST (0x08) + +/* CTRL3 - rom write control, CPLD identity */ + +#define BAST_CPLD_CTRL3_IDMASK (0x0e) +#define BAST_CPLD_CTRL3_ROMWEN (0x01) + +/* CTRL4 - 8bit LCD interface control/status */ + +#define BAST_CPLD_CTRL4_LLAT (0x01) +#define BAST_CPLD_CTRL4_LCDRW (0x02) +#define BAST_CPLD_CTRL4_LCDCMD (0x04) +#define BAST_CPLD_CTRL4_LCDE2 (0x01) + +/* CTRL5 - DMA routing */ + +#define BAST_CPLD_DMA0_PRIIDE (0<<0) +#define BAST_CPLD_DMA0_SECIDE (1<<0) +#define BAST_CPLD_DMA0_ISA15 (2<<0) +#define BAST_CPLD_DMA0_ISA36 (3<<0) + +#define BAST_CPLD_DMA1_PRIIDE (0<<2) +#define BAST_CPLD_DMA1_SECIDE (1<<2) +#define BAST_CPLD_DMA1_ISA15 (2<<2) +#define BAST_CPLD_DMA1_ISA36 (3<<2) + +#endif /* __ASM_ARCH_BASTCPLD_H */ diff --git a/include/asm-arm/arch-s3c2410/bast-irq.h b/include/asm-arm/arch-s3c2410/bast-irq.h new file mode 100644 index 00000000000..b79b47f0d12 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/bast-irq.h @@ -0,0 +1,33 @@ +/* linux/include/asm-arm/arch-s3c2410/bast-irq.h + * + * (c) 2003,2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Machine BAST - IRQ Number definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 14-Sep-2004 BJD Fixed IRQ_USBOC definition + * 06-Jan-2003 BJD Linux 2.6.0 version + */ + +#ifndef __ASM_ARCH_BASTIRQ_H +#define __ASM_ARCH_BASTIRQ_H + +/* irq numbers to onboard peripherals */ + +#define IRQ_USBOC IRQ_EINT18 +#define IRQ_IDE0 IRQ_EINT16 +#define IRQ_IDE1 IRQ_EINT17 +#define IRQ_PCSERIAL1 IRQ_EINT15 +#define IRQ_PCSERIAL2 IRQ_EINT14 +#define IRQ_PCPARALLEL IRQ_EINT13 +#define IRQ_ASIX IRQ_EINT11 +#define IRQ_DM9000 IRQ_EINT10 +#define IRQ_ISA IRQ_EINT9 +#define IRQ_SMALERT IRQ_EINT8 + +#endif /* __ASM_ARCH_BASTIRQ_H */ diff --git a/include/asm-arm/arch-s3c2410/bast-map.h b/include/asm-arm/arch-s3c2410/bast-map.h new file mode 100644 index 00000000000..29c07e302b0 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/bast-map.h @@ -0,0 +1,150 @@ +/* linux/include/asm-arm/arch-s3c2410/bast-map.h + * + * (c) 2003,2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Machine BAST - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 06-Jan-2003 BJD Linux 2.6.0 version, moved bast specifics from arch/map.h + * 12-Mar-2004 BJD Fixed header include protection +*/ + +/* needs arch/map.h including with this */ + +/* ok, we've used up to 0x13000000, now we need to find space for the + * peripherals that live in the nGCS[x] areas, which are quite numerous + * in their space. We also have the board's CPLD to find register space + * for. + */ + +#ifndef __ASM_ARCH_BASTMAP_H +#define __ASM_ARCH_BASTMAP_H + +#define BAST_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000)) + +/* we put the CPLD registers next, to get them out of the way */ + +#define BAST_VA_CTRL1 BAST_IOADDR(0x00000000) /* 0x01300000 */ +#define BAST_PA_CTRL1 (S3C2410_CS5 | 0x7800000) + +#define BAST_VA_CTRL2 BAST_IOADDR(0x00100000) /* 0x01400000 */ +#define BAST_PA_CTRL2 (S3C2410_CS1 | 0x6000000) + +#define BAST_VA_CTRL3 BAST_IOADDR(0x00200000) /* 0x01500000 */ +#define BAST_PA_CTRL3 (S3C2410_CS1 | 0x6800000) + +#define BAST_VA_CTRL4 BAST_IOADDR(0x00300000) /* 0x01600000 */ +#define BAST_PA_CTRL4 (S3C2410_CS1 | 0x7000000) + +/* next, we have the PC104 ISA interrupt registers */ + +#define BAST_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */ +#define BAST_VA_PC104_IRQREQ BAST_IOADDR(0x00400000) + +#define BAST_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */ +#define BAST_VA_PC104_IRQRAW BAST_IOADDR(0x00500000) + +#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */ +#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000) + +#define BAST_PA_LCD_RCMD1 (0x8800000) +#define BAST_VA_LCD_RCMD1 BAST_IOADDR(0x00700000) + +#define BAST_PA_LCD_WCMD1 (0x8000000) +#define BAST_VA_LCD_WCMD1 BAST_IOADDR(0x00800000) + +#define BAST_PA_LCD_RDATA1 (0x9800000) +#define BAST_VA_LCD_RDATA1 BAST_IOADDR(0x00900000) + +#define BAST_PA_LCD_WDATA1 (0x9000000) +#define BAST_VA_LCD_WDATA1 BAST_IOADDR(0x00A00000) + +#define BAST_PA_LCD_RCMD2 (0xA800000) +#define BAST_VA_LCD_RCMD2 BAST_IOADDR(0x00B00000) + +#define BAST_PA_LCD_WCMD2 (0xA000000) +#define BAST_VA_LCD_WCMD2 BAST_IOADDR(0x00C00000) + +#define BAST_PA_LCD_RDATA2 (0xB800000) +#define BAST_VA_LCD_RDATA2 BAST_IOADDR(0x00D00000) + +#define BAST_PA_LCD_WDATA2 (0xB000000) +#define BAST_VA_LCD_WDATA2 BAST_IOADDR(0x00E00000) + + +/* 0xE0000000 contains the IO space that is split by speed and + * wether the access is for 8 or 16bit IO... this ensures that + * the correct access is made + * + * 0x10000000 of space, partitioned as so: + * + * 0x00000000 to 0x04000000 8bit, slow + * 0x04000000 to 0x08000000 16bit, slow + * 0x08000000 to 0x0C000000 16bit, net + * 0x0C000000 to 0x10000000 16bit, fast + * + * each of these spaces has the following in: + * + * 0x00000000 to 0x01000000 16MB ISA IO space + * 0x01000000 to 0x02000000 16MB ISA memory space + * 0x02000000 to 0x02100000 1MB IDE primary channel + * 0x02100000 to 0x02200000 1MB IDE primary channel aux + * 0x02200000 to 0x02400000 1MB IDE secondary channel + * 0x02300000 to 0x02400000 1MB IDE secondary channel aux + * 0x02400000 to 0x02500000 1MB ASIX ethernet controller + * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controller + * 0x02600000 to 0x02700000 1MB PC SuperIO controller + * + * the phyiscal layout of the zones are: + * nGCS2 - 8bit, slow + * nGCS3 - 16bit, slow + * nGCS4 - 16bit, net + * nGCS5 - 16bit, fast + */ + +#define BAST_VA_MULTISPACE (0xE0000000) + +#define BAST_VA_ISAIO (BAST_VA_MULTISPACE + 0x00000000) +#define BAST_VA_ISAMEM (BAST_VA_MULTISPACE + 0x01000000) +#define BAST_VA_IDEPRI (BAST_VA_MULTISPACE + 0x02000000) +#define BAST_VA_IDEPRIAUX (BAST_VA_MULTISPACE + 0x02100000) +#define BAST_VA_IDESEC (BAST_VA_MULTISPACE + 0x02200000) +#define BAST_VA_IDESECAUX (BAST_VA_MULTISPACE + 0x02300000) +#define BAST_VA_ASIXNET (BAST_VA_MULTISPACE + 0x02400000) +#define BAST_VA_DM9000 (BAST_VA_MULTISPACE + 0x02500000) +#define BAST_VA_SUPERIO (BAST_VA_MULTISPACE + 0x02600000) + +#define BAST_VA_MULTISPACE (0xE0000000) + +#define BAST_VAM_CS2 (0x00000000) +#define BAST_VAM_CS3 (0x04000000) +#define BAST_VAM_CS4 (0x08000000) +#define BAST_VAM_CS5 (0x0C000000) + +/* physical offset addresses for the peripherals */ + +#define BAST_PA_ISAIO (0x00000000) +#define BAST_PA_ASIXNET (0x01000000) +#define BAST_PA_SUPERIO (0x01800000) +#define BAST_PA_IDEPRI (0x02000000) +#define BAST_PA_IDEPRIAUX (0x02800000) +#define BAST_PA_IDESEC (0x03000000) +#define BAST_PA_IDESECAUX (0x03800000) +#define BAST_PA_ISAMEM (0x04000000) +#define BAST_PA_DM9000 (0x05000000) + +/* some configurations for the peripherals */ + +#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2) +/* */ + +#define BAST_ASIXNET_CS BAST_VAM_CS5 +#define BAST_IDE_CS BAST_VAM_CS5 +#define BAST_DM9000_CS BAST_VAM_CS4 + +#endif /* __ASM_ARCH_BASTMAP_H */ diff --git a/include/asm-arm/arch-s3c2410/bast-pmu.h b/include/asm-arm/arch-s3c2410/bast-pmu.h new file mode 100644 index 00000000000..758c5c59d4b --- /dev/null +++ b/include/asm-arm/arch-s3c2410/bast-pmu.h @@ -0,0 +1,43 @@ +/* linux/include/asm-arm/arch-s3c2410/bast-pmu.h + * + * (c) 2003,2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * Vincent Sanders <vince@simtec.co.uk> + * + * Machine BAST - Power Management chip + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 08-Oct-2003 BJD Initial creation +*/ + +#ifndef __ASM_ARCH_BASTPMU_H +#define __ASM_ARCH_BASTPMU_H "08_OCT_2004" + +#define BASTPMU_REG_IDENT (0x00) +#define BASTPMU_REG_VERSION (0x01) +#define BASTPMU_REG_DDCCTRL (0x02) +#define BASTPMU_REG_POWER (0x03) +#define BASTPMU_REG_RESET (0x04) +#define BASTPMU_REG_GWO (0x05) +#define BASTPMU_REG_WOL (0x06) +#define BASTPMU_REG_WOR (0x07) +#define BASTPMU_REG_UID (0x09) + +#define BASTPMU_EEPROM (0xC0) + +#define BASTPMU_EEP_UID (BASTPMU_EEPROM + 0) +#define BASTPMU_EEP_WOL (BASTPMU_EEPROM + 8) +#define BASTPMU_EEP_WOR (BASTPMU_EEPROM + 9) + +#define BASTPMU_IDENT_0 0x53 +#define BASTPMU_IDENT_1 0x42 +#define BASTPMU_IDENT_2 0x50 +#define BASTPMU_IDENT_3 0x4d + +#define BASTPMU_RESET_GUARD (0x55) + +#endif /* __ASM_ARCH_BASTPMU_H */ diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S new file mode 100644 index 00000000000..abfbe45cd17 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/debug-macro.S @@ -0,0 +1,99 @@ +/* linux/include/asm-arm/arch-s3c2410/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Copyright (C) 2005 Simtec Electronics + * + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Modifications: + * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA +*/ + +#include <asm/arch/map.h> +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> + +#define S3C2410_UART1_OFF (0x4000) +#define SHIFT_2440TXF (14-9) + + .macro addruart, rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 + ldreq \rx, = S3C2410_PA_UART + ldrne \rx, = S3C24XX_VA_UART +#if CONFIG_DEBUG_S3C2410_UART != 0 + add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C2410_UART) +#endif + .endm + + .macro senduart,rd,rx + str \rd, [\rx, # S3C2410_UTXH ] + .endm + + .macro busyuart, rd, rx + ldr \rd, [ \rx, # S3C2410_UFCON ] + tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? + beq 1001f @ + @ FIFO enabled... +1003: + mrc p15, 0, \rd, c1, c0 + tst \rd, #1 + addeq \rd, \rx, #(S3C2410_PA_GPIO - S3C2410_PA_UART) + addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) + bic \rd, \rd, #0xff000 + ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ] + and \rd, \rd, #0x00ff0000 + teq \rd, #0x00440000 @ is it 2440? + + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + moveq \rd, \rd, lsr #SHIFT_2440TXF + tst \rd, #S3C2410_UFSTAT_TXFULL + bne 1003b + b 1002f + +1001: + @ busy waiting for non fifo + ldr \rd, [ \rx, # S3C2410_UTRSTAT ] + tst \rd, #S3C2410_UTRSTAT_TXFE + beq 1001b + +1002: @ exit busyuart + .endm + + .macro waituart,rd,rx + + ldr \rd, [ \rx, # S3C2410_UFCON ] + tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? + beq 1001f @ + @ FIFO enabled... +1003: + mrc p15, 0, \rd, c1, c0 + tst \rd, #1 + addeq \rd, \rx, #(S3C2410_PA_GPIO - S3C2410_PA_UART) + addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) + bic \rd, \rd, #0xff000 + ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ] + and \rd, \rd, #0x00ff0000 + teq \rd, #0x00440000 @ is it 2440? + + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + andne \rd, \rd, #S3C2410_UFSTAT_TXMASK + andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK + teq \rd, #0 + bne 1003b + b 1002f + +1001: + @ idle waiting for non fifo + ldr \rd, [ \rx, # S3C2410_UTRSTAT ] + tst \rd, #S3C2410_UTRSTAT_TXFE + beq 1001b + +1002: @ exit busyuart + .endm diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h new file mode 100644 index 00000000000..e830a40e573 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/dma.h @@ -0,0 +1,376 @@ +/* linux/include/asm-arm/arch-bast/dma.h + * + * Copyright (C) 2003,2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Samsung S3C2410X DMA support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * ??-May-2003 BJD Created file + * ??-Jun-2003 BJD Added more dma functionality to go with arch + * 10-Nov-2004 BJD Added sys_device support +*/ + +#ifndef __ASM_ARCH_DMA_H +#define __ASM_ARCH_DMA_H __FILE__ + +#include <linux/config.h> +#include <linux/sysdev.h> +#include "hardware.h" + + +/* + * This is the maximum DMA address(physical address) that can be DMAd to. + * + */ +#define MAX_DMA_ADDRESS 0x20000000 +#define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */ + + +/* according to the samsung port, we cannot use the regular + * dma channels... we must therefore provide our own interface + * for DMA, and allow our drivers to use that. + */ + +#define MAX_DMA_CHANNELS 0 + + +/* we have 4 dma channels */ +#define S3C2410_DMA_CHANNELS (4) + +/* types */ + +typedef enum { + S3C2410_DMA_IDLE, + S3C2410_DMA_RUNNING, + S3C2410_DMA_PAUSED +} s3c2410_dma_state_t; + + +/* s3c2410_dma_loadst_t + * + * This represents the state of the DMA engine, wrt to the loaded / running + * transfers. Since we don't have any way of knowing exactly the state of + * the DMA transfers, we need to know the state to make decisions on wether + * we can + * + * S3C2410_DMA_NONE + * + * There are no buffers loaded (the channel should be inactive) + * + * S3C2410_DMA_1LOADED + * + * There is one buffer loaded, however it has not been confirmed to be + * loaded by the DMA engine. This may be because the channel is not + * yet running, or the DMA driver decided that it was too costly to + * sit and wait for it to happen. + * + * S3C2410_DMA_1RUNNING + * + * The buffer has been confirmed running, and not finisged + * + * S3C2410_DMA_1LOADED_1RUNNING + * + * There is a buffer waiting to be loaded by the DMA engine, and one + * currently running. +*/ + +typedef enum { + S3C2410_DMALOAD_NONE, + S3C2410_DMALOAD_1LOADED, + S3C2410_DMALOAD_1RUNNING, + S3C2410_DMALOAD_1LOADED_1RUNNING, +} s3c2410_dma_loadst_t; + +typedef enum { + S3C2410_RES_OK, + S3C2410_RES_ERR, + S3C2410_RES_ABORT +} s3c2410_dma_buffresult_t; + + +typedef enum s3c2410_dmasrc_e s3c2410_dmasrc_t; + +enum s3c2410_dmasrc_e { + S3C2410_DMASRC_HW, /* source is memory */ + S3C2410_DMASRC_MEM /* source is hardware */ +}; + +/* enum s3c2410_chan_op_e + * + * operation codes passed to the DMA code by the user, and also used + * to inform the current channel owner of any changes to the system state +*/ + +enum s3c2410_chan_op_e { + S3C2410_DMAOP_START, + S3C2410_DMAOP_STOP, + S3C2410_DMAOP_PAUSE, + S3C2410_DMAOP_RESUME, + S3C2410_DMAOP_FLUSH, + S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */ +}; + +typedef enum s3c2410_chan_op_e s3c2410_chan_op_t; + +/* flags */ + +#define S3C2410_DMAF_SLOW (1<<0) /* slow, so don't worry about + * waiting for reloads */ +#define S3C2410_DMAF_AUTOSTART (1<<1) /* auto-start if buffer queued */ + +/* dma buffer */ + +typedef struct s3c2410_dma_buf_s s3c2410_dma_buf_t; + +struct s3c2410_dma_client { + char *name; +}; + +typedef struct s3c2410_dma_client s3c2410_dma_client_t; + +/* s3c2410_dma_buf_s + * + * internally used buffer structure to describe a queued or running + * buffer. +*/ + +struct s3c2410_dma_buf_s { + s3c2410_dma_buf_t *next; + int magic; /* magic */ + int size; /* buffer size in bytes */ + dma_addr_t data; /* start of DMA data */ + dma_addr_t ptr; /* where the DMA got to [1] */ + void *id; /* client's id */ +}; + +/* [1] is this updated for both recv/send modes? */ + +typedef struct s3c2410_dma_chan_s s3c2410_dma_chan_t; + +/* s3c2410_dma_cbfn_t + * + * buffer callback routine type +*/ + +typedef void (*s3c2410_dma_cbfn_t)(s3c2410_dma_chan_t *, void *buf, int size, + s3c2410_dma_buffresult_t result); + +typedef int (*s3c2410_dma_opfn_t)(s3c2410_dma_chan_t *, + s3c2410_chan_op_t ); + +struct s3c2410_dma_stats_s { + unsigned long loads; + unsigned long timeout_longest; + unsigned long timeout_shortest; + unsigned long timeout_avg; + unsigned long timeout_failed; +}; + +typedef struct s3c2410_dma_stats_s s3c2410_dma_stats_t; + +/* struct s3c2410_dma_chan_s + * + * full state information for each DMA channel +*/ + +struct s3c2410_dma_chan_s { + /* channel state flags and information */ + unsigned char number; /* number of this dma channel */ + unsigned char in_use; /* channel allocated */ + unsigned char irq_claimed; /* irq claimed for channel */ + unsigned char irq_enabled; /* irq enabled for channel */ + unsigned char xfer_unit; /* size of an transfer */ + + /* channel state */ + + s3c2410_dma_state_t state; + s3c2410_dma_loadst_t load_state; + s3c2410_dma_client_t *client; + + /* channel configuration */ + s3c2410_dmasrc_t source; + unsigned long dev_addr; + unsigned long load_timeout; + unsigned int flags; /* channel flags */ + + /* channel's hardware position and configuration */ + void __iomem *regs; /* channels registers */ + void __iomem *addr_reg; /* data address register */ + unsigned int irq; /* channel irq */ + unsigned long dcon; /* default value of DCON */ + + /* driver handles */ + s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */ + s3c2410_dma_opfn_t op_fn; /* channel operation callback */ + + /* stats gathering */ + s3c2410_dma_stats_t *stats; + s3c2410_dma_stats_t stats_store; + + /* buffer list and information */ + s3c2410_dma_buf_t *curr; /* current dma buffer */ + s3c2410_dma_buf_t *next; /* next buffer to load */ + s3c2410_dma_buf_t *end; /* end of queue */ + + /* system device */ + struct sys_device dev; +}; + +/* the currently allocated channel information */ +extern s3c2410_dma_chan_t s3c2410_chans[]; + +/* note, we don't really use dma_device_t at the moment */ +typedef unsigned long dma_device_t; + +/* functions --------------------------------------------------------------- */ + +/* s3c2410_dma_request + * + * request a dma channel exclusivley +*/ + +extern int s3c2410_dma_request(dmach_t channel, + s3c2410_dma_client_t *, void *dev); + + +/* s3c2410_dma_ctrl + * + * change the state of the dma channel +*/ + +extern int s3c2410_dma_ctrl(dmach_t channel, s3c2410_chan_op_t op); + +/* s3c2410_dma_setflags + * + * set the channel's flags to a given state +*/ + +extern int s3c2410_dma_setflags(dmach_t channel, + unsigned int flags); + +/* s3c2410_dma_free + * + * free the dma channel (will also abort any outstanding operations) +*/ + +extern int s3c2410_dma_free(dmach_t channel, s3c2410_dma_client_t *); + +/* s3c2410_dma_enqueue + * + * place the given buffer onto the queue of operations for the channel. + * The buffer must be allocated from dma coherent memory, or the Dcache/WB + * drained before the buffer is given to the DMA system. +*/ + +extern int s3c2410_dma_enqueue(dmach_t channel, void *id, + dma_addr_t data, int size); + +/* s3c2410_dma_config + * + * configure the dma channel +*/ + +extern int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon); + +/* s3c2410_dma_devconfig + * + * configure the device we're talking to +*/ + +extern int s3c2410_dma_devconfig(int channel, s3c2410_dmasrc_t source, + int hwcfg, unsigned long devaddr); + +/* s3c2410_dma_getposition + * + * get the position that the dma transfer is currently at +*/ + +extern int s3c2410_dma_getposition(dmach_t channel, + dma_addr_t *src, dma_addr_t *dest); + +extern int s3c2410_dma_set_opfn(dmach_t, s3c2410_dma_opfn_t rtn); +extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn); + +/* DMA Register definitions */ + +#define S3C2410_DMA_DISRC (0x00) +#define S3C2410_DMA_DISRCC (0x04) +#define S3C2410_DMA_DIDST (0x08) +#define S3C2410_DMA_DIDSTC (0x0C) +#define S3C2410_DMA_DCON (0x10) +#define S3C2410_DMA_DSTAT (0x14) +#define S3C2410_DMA_DCSRC (0x18) +#define S3C2410_DMA_DCDST (0x1C) +#define S3C2410_DMA_DMASKTRIG (0x20) + +#define S3C2410_DISRCC_INC (1<<0) +#define S3C2410_DISRCC_APB (1<<1) + +#define S3C2410_DMASKTRIG_STOP (1<<2) +#define S3C2410_DMASKTRIG_ON (1<<1) +#define S3C2410_DMASKTRIG_SWTRIG (1<<0) + +#define S3C2410_DCON_DEMAND (0<<31) +#define S3C2410_DCON_HANDSHAKE (1<<31) +#define S3C2410_DCON_SYNC_PCLK (0<<30) +#define S3C2410_DCON_SYNC_HCLK (1<<30) + +#define S3C2410_DCON_INTREQ (1<<29) + +#define S3C2410_DCON_CH0_XDREQ0 (0<<24) +#define S3C2410_DCON_CH0_UART0 (1<<24) +#define S3C2410_DCON_CH0_SDI (2<<24) +#define S3C2410_DCON_CH0_TIMER (3<<24) +#define S3C2410_DCON_CH0_USBEP1 (4<<24) + +#define S3C2410_DCON_CH1_XDREQ1 (0<<24) +#define S3C2410_DCON_CH1_UART1 (1<<24) +#define S3C2410_DCON_CH1_I2SSDI (2<<24) +#define S3C2410_DCON_CH1_SPI (3<<24) +#define S3C2410_DCON_CH1_USBEP2 (4<<24) + +#define S3C2410_DCON_CH2_I2SSDO (0<<24) +#define S3C2410_DCON_CH2_I2SSDI (1<<24) +#define S3C2410_DCON_CH2_SDI (2<<24) +#define S3C2410_DCON_CH2_TIMER (3<<24) +#define S3C2410_DCON_CH2_USBEP3 (4<<24) + +#define S3C2410_DCON_CH3_UART2 (0<<24) +#define S3C2410_DCON_CH3_SDI (1<<24) +#define S3C2410_DCON_CH3_SPI (2<<24) +#define S3C2410_DCON_CH3_TIMER (3<<24) +#define S3C2410_DCON_CH3_USBEP4 (4<<24) + +#define S3C2410_DCON_SRCSHIFT (24) +#define S3C2410_DCON_SRCMASK (7<<24) + +#define S3C2410_DCON_BYTE (0<<20) +#define S3C2410_DCON_HALFWORD (1<<20) +#define S3C2410_DCON_WORD (2<<20) + +#define S3C2410_DCON_AUTORELOAD (0<<22) +#define S3C2410_DCON_NORELOAD (1<<22) +#define S3C2410_DCON_HWTRIG (1<<23) + +#ifdef CONFIG_CPU_S3C2440 +#define S3C2440_DIDSTC_CHKINT (1<<2) + +#define S3C2440_DCON_CH0_I2SSDO (5<<24) +#define S3C2440_DCON_CH0_PCMIN (6<<24) + +#define S3C2440_DCON_CH1_PCMOUT (5<<24) +#define S3C2440_DCON_CH1_SDI (6<<24) + +#define S3C2440_DCON_CH2_PCMIN (5<<24) +#define S3C2440_DCON_CH2_MICIN (6<<24) + +#define S3C2440_DCON_CH3_MICIN (5<<24) +#define S3C2440_DCON_CH3_PCMOUT (6<<24) +#endif + +#endif /* __ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-s3c2410/entry-macro.S b/include/asm-arm/arch-s3c2410/entry-macro.S new file mode 100644 index 00000000000..b7d4d7f4422 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/entry-macro.S @@ -0,0 +1,119 @@ +/* + * include/asm-arm/arch-s3c2410/entry-macro.S + * + * Low-level IRQ helper macros for S3C2410-based platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + + * Modifications: + * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA + */ + + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + mov \tmp, #S3C24XX_VA_IRQ + ldr \irqnr, [ \tmp, #0x14 ] @ get irq no +30000: + teq \irqnr, #4 + teqne \irqnr, #5 + beq 1002f @ external irq reg + + @ debug check to see if interrupt reported is the same + @ as the offset.... + + teq \irqnr, #0 + beq 20002f + ldr \irqstat, [ \tmp, #0x10 ] @ INTPND + mov \irqstat, \irqstat, lsr \irqnr + tst \irqstat, #1 + bne 20002f + + /* debug/warning if we get an invalud response from the + * INTOFFSET register */ +#if 1 + stmfd r13!, { r0 - r4 , r8-r12, r14 } + ldr r1, [ \tmp, #0x14 ] @ INTOFFSET + ldr r2, [ \tmp, #0x10 ] @ INTPND + ldr r3, [ \tmp, #0x00 ] @ SRCPND + adr r0, 20003f + bl printk + b 20004f + +20003: + .ascii "<7>irq: err - bad offset %d, intpnd=%08x, srcpnd=%08x\n" + .byte 0 + .align 4 +20004: + mov r1, #1 + mov \tmp, #S3C24XX_VA_IRQ + ldmfd r13!, { r0 - r4 , r8-r12, r14 } +#endif + + @ try working out interrupt number for ourselves + mov \irqnr, #0 + ldr \irqstat, [ \tmp, #0x10 ] @ INTPND +10021: + movs \irqstat, \irqstat, lsr#1 + bcs 30000b @ try and re-start the proccess + add \irqnr, \irqnr, #1 + cmp \irqnr, #32 + ble 10021b + + @ found no interrupt, set Z flag and leave + movs \irqnr, #0 + b 1001f + +20005: +20002: @ exit + @ we base the s3c2410x interrupts at 16 and above to allow + @ isa peripherals to have their standard interrupts, also + @ ensure that Z flag is un-set on exit + + @ note, we cannot be sure if we get IRQ_EINT0 (0) that + @ there is simply no interrupt pending, so in all other + @ cases we jump to say we have found something, otherwise + @ we check to see if the interrupt really is assrted + adds \irqnr, \irqnr, #IRQ_EINT0 + teq \irqnr, #IRQ_EINT0 + bne 1001f @ exit + ldr \irqstat, [ \tmp, #0x10 ] @ INTPND + teq \irqstat, #0 + moveq \irqnr, #0 + b 1001f + + @ we get here from no main or external interrupts pending +1002: + add \tmp, \tmp, #S3C24XX_VA_GPIO - S3C24XX_VA_IRQ + ldr \irqstat, [ \tmp, # 0xa8 ] @ EXTINTPEND + ldr \irqnr, [ \tmp, # 0xa4 ] @ EXTINTMASK + + bic \irqstat, \irqstat, \irqnr @ clear masked irqs + + mov \irqnr, #IRQ_EINT4 @ start extint nos + mov \irqstat, \irqstat, lsr#4 @ ignore bottom 4 bits +10021: + movs \irqstat, \irqstat, lsr#1 + bcs 1004f + add \irqnr, \irqnr, #1 + cmp \irqnr, #IRQ_EINT23 + ble 10021b + + @ found no interrupt, set Z flag and leave + movs \irqnr, #0 + +1004: @ ensure Z flag clear in case our MOVS shifted out the last bit + teq \irqnr, #0 +1001: + @ exit irq routine + .endm + + + /* currently don't need an disable_fiq macro */ + + .macro disable_fiq + .endm + + diff --git a/include/asm-arm/arch-s3c2410/hardware.h b/include/asm-arm/arch-s3c2410/hardware.h new file mode 100644 index 00000000000..48a39918a76 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/hardware.h @@ -0,0 +1,105 @@ +/* linux/include/asm-arm/arch-s3c2410/hardware.h + * + * (c) 2003 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - hardware + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 21-May-2003 BJD Created file + * 06-Jun-2003 BJD Added CPU frequency settings + * 03-Sep-2003 BJD Linux v2.6 support + * 12-Mar-2004 BJD Fixed include protection, fixed type of clock vars + * 14-Sep-2004 BJD Added misccr and getpin to gpio + * 01-Oct-2004 BJD Added the new gpio functions + * 16-Oct-2004 BJD Removed the clock variables +*/ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#ifndef __ASSEMBLY__ + +/* external functions for GPIO support + * + * These allow various different clients to access the same GPIO + * registers without conflicting. If your driver only owns the entire + * GPIO register, then it is safe to ioremap/__raw_{read|write} to it. +*/ + +/* s3c2410_gpio_cfgpin + * + * set the configuration of the given pin to the value passed. + * + * eg: + * s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0); + * s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1); +*/ + +extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function); + +extern unsigned int s3c2410_gpio_getcfg(unsigned int pin); + +/* s3c2410_gpio_getirq + * + * turn the given pin number into the corresponding IRQ number + * + * returns: + * < 0 = no interrupt for this pin + * >=0 = interrupt number for the pin +*/ + +extern int s3c2410_gpio_getirq(unsigned int pin); + +/* s3c2410_gpio_irqfilter + * + * set the irq filtering on the given pin + * + * on = 0 => disable filtering + * 1 => enable filtering + * + * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with + * width of filter (0 through 63) + * + * +*/ + +extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, + unsigned int config); + +/* s3c2410_gpio_pullup + * + * configure the pull-up control on the given pin + * + * to = 1 => disable the pull-up + * 0 => enable the pull-up + * + * eg; + * + * s3c2410_gpio_pullup(S3C2410_GPB0, 0); + * s3c2410_gpio_pullup(S3C2410_GPE8, 0); +*/ + +extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to); + +extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to); + +extern unsigned int s3c2410_gpio_getpin(unsigned int pin); + +extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg); + +#endif /* __ASSEMBLY__ */ + +#include <asm/sizes.h> +#include <asm/arch/map.h> + +/* machine specific hardware definitions should go after this */ + +/* currently here until moved into config (todo) */ +#define CONFIG_NO_MULTIWORD_IO + +#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-s3c2410/idle.h b/include/asm-arm/arch-s3c2410/idle.h new file mode 100644 index 00000000000..749227c0957 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/idle.h @@ -0,0 +1,28 @@ +/* linux/include/asm-arm/arch-s3c2410/idle.h + * + * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 CPU Idle controls + * + * Changelog: + * 28-Oct-2004 BJD Initial version + * +*/ + +#ifndef __ASM_ARCH_IDLE_H +#define __ASM_ARCH_IDLE_H __FILE__ + +/* This allows the over-ride of the default idle code, in case there + * is any other things to be done over idle (like DVS) +*/ + +extern void (*s3c24xx_idle)(void); + +extern void s3c24xx_default_idle(void); + +#endif /* __ASM_ARCH_IDLE_H */ diff --git a/include/asm-arm/arch-s3c2410/iic.h b/include/asm-arm/arch-s3c2410/iic.h new file mode 100644 index 00000000000..518547f6d7a --- /dev/null +++ b/include/asm-arm/arch-s3c2410/iic.h @@ -0,0 +1,36 @@ +/* linux/include/asm-arm/arch-s3c2410/iic.h + * + * (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - I2C Controller platfrom_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 05-Oct-2004 BJD Created file + * 19-Oct-2004 BJD Updated for s3c2440 +*/ + +#ifndef __ASM_ARCH_IIC_H +#define __ASM_ARCH_IIC_H __FILE__ + +#define S3C_IICFLG_FILTER (1<<0) /* enable s3c2440 filter */ + +/* Notes: + * 1) All frequencies are expressed in Hz + * 2) A value of zero is `do not care` +*/ + +struct s3c2410_platform_i2c { + unsigned int flags; + unsigned int slave_addr; /* slave address for controller */ + unsigned long bus_freq; /* standard bus frequency */ + unsigned long max_freq; /* max frequency for the bus */ + unsigned long min_freq; /* min frequency for the bus */ + unsigned int sda_delay; /* pclks (s3c2440 only) */ +}; + +#endif /* __ASM_ARCH_IIC_H */ diff --git a/include/asm-arm/arch-s3c2410/io.h b/include/asm-arm/arch-s3c2410/io.h new file mode 100644 index 00000000000..418233a7ee6 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/io.h @@ -0,0 +1,196 @@ +/* + * linux/include/asm-arm/arch-s3c2410/io.h + * from linux/include/asm-arm/arch-rpc/io.h + * + * Copyright (C) 1997 Russell King + * (C) 2003 Simtec Electronics + * + * Modifications: + * 06-Dec-1997 RMK Created. + * 02-Sep-2003 BJD Modified for S3C2410 + * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA + * + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * We use two different types of addressing - PC style addresses, and ARM + * addresses. PC style accesses the PC hardware with the normal PC IO + * addresses, eg 0x3f8 for serial#1. ARM addresses are above A28 + * and are translated to the start of IO. Note that all addresses are + * not shifted left! + */ + +#define __PORT_PCIO(x) ((x) < (1<<28)) + +#define PCIO_BASE (S3C24XX_VA_ISA_WORD) +#define PCIO_BASE_b (S3C24XX_VA_ISA_BYTE) +#define PCIO_BASE_w (S3C24XX_VA_ISA_WORD) +#define PCIO_BASE_l (S3C24XX_VA_ISA_WORD) +/* + * Dynamic IO functions - let the compiler + * optimize the expressions + */ + +#define DECLARE_DYN_OUT(sz,fnsuffix,instr) \ +static inline void __out##fnsuffix (unsigned int val, unsigned int port) \ +{ \ + unsigned long temp; \ + __asm__ __volatile__( \ + "cmp %2, #(1<<28)\n\t" \ + "mov %0, %2\n\t" \ + "addcc %0, %0, %3\n\t" \ + "str" instr " %1, [%0, #0 ] @ out" #fnsuffix \ + : "=&r" (temp) \ + : "r" (val), "r" (port), "Ir" (PCIO_BASE_##fnsuffix) \ + : "cc"); \ +} + + +#define DECLARE_DYN_IN(sz,fnsuffix,instr) \ +static inline unsigned sz __in##fnsuffix (unsigned int port) \ +{ \ + unsigned long temp, value; \ + __asm__ __volatile__( \ + "cmp %2, #(1<<28)\n\t" \ + "mov %0, %2\n\t" \ + "addcc %0, %0, %3\n\t" \ + "ldr" instr " %1, [%0, #0 ] @ in" #fnsuffix \ + : "=&r" (temp), "=r" (value) \ + : "r" (port), "Ir" (PCIO_BASE_##fnsuffix) \ + : "cc"); \ + return (unsigned sz)value; \ +} + +static inline void __iomem *__ioaddr (unsigned long port) +{ + return __PORT_PCIO(port) ? (PCIO_BASE + port) : (void __iomem *)port; +} + +#define DECLARE_IO(sz,fnsuffix,instr) \ + DECLARE_DYN_IN(sz,fnsuffix,instr) \ + DECLARE_DYN_OUT(sz,fnsuffix,instr) + +DECLARE_IO(char,b,"b") +DECLARE_IO(short,w,"h") +DECLARE_IO(int,l,"") + +#undef DECLARE_IO +#undef DECLARE_DYN_IN + +/* + * Constant address IO functions + * + * These have to be macros for the 'J' constraint to work - + * +/-4096 immediate operand. + */ +#define __outbc(value,port) \ +({ \ + if (__PORT_PCIO((port))) \ + __asm__ __volatile__( \ + "strb %0, [%1, %2] @ outbc" \ + : : "r" (value), "r" (PCIO_BASE), "Jr" ((port))); \ + else \ + __asm__ __volatile__( \ + "strb %0, [%1, #0] @ outbc" \ + : : "r" (value), "r" ((port))); \ +}) + +#define __inbc(port) \ +({ \ + unsigned char result; \ + if (__PORT_PCIO((port))) \ + __asm__ __volatile__( \ + "ldrb %0, [%1, %2] @ inbc" \ + : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \ + else \ + __asm__ __volatile__( \ + "ldrb %0, [%1, #0] @ inbc" \ + : "=r" (result) : "r" ((port))); \ + result; \ +}) + +#define __outwc(value,port) \ +({ \ + unsigned long v = value; \ + if (__PORT_PCIO((port))) \ + __asm__ __volatile__( \ + "strh %0, [%1, %2] @ outwc" \ + : : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \ + else \ + __asm__ __volatile__( \ + "strh %0, [%1, #0] @ outwc" \ + : : "r" (v), "r" ((port))); \ +}) + +#define __inwc(port) \ +({ \ + unsigned short result; \ + if (__PORT_PCIO((port))) \ + __asm__ __volatile__( \ + "ldrh %0, [%1, %2] @ inwc" \ + : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \ + else \ + __asm__ __volatile__( \ + "ldrh %0, [%1, #0] @ inwc" \ + : "=r" (result) : "r" ((port))); \ + result; \ +}) + +#define __outlc(value,port) \ +({ \ + unsigned long v = value; \ + if (__PORT_PCIO((port))) \ + __asm__ __volatile__( \ + "str %0, [%1, %2] @ outlc" \ + : : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \ + else \ + __asm__ __volatile__( \ + "str %0, [%1, #0] @ outlc" \ + : : "r" (v), "r" ((port))); \ +}) + +#define __inlc(port) \ +({ \ + unsigned long result; \ + if (__PORT_PCIO((port))) \ + __asm__ __volatile__( \ + "ldr %0, [%1, %2] @ inlc" \ + : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \ + else \ + __asm__ __volatile__( \ + "ldr %0, [%1, #0] @ inlc" \ + : "=r" (result) : "r" ((port))); \ + result; \ +}) + +#define __ioaddrc(port) ((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port))) + +#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p)) +#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p)) +#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p)) +#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p)) +#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p)) +#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p)) +#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p)) +/* the following macro is deprecated */ +#define ioaddr(port) __ioaddr((port)) + +#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l) +#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l) +#define insl(p,d,l) __raw_readsl(__ioaddr(p),d,l) + +#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l) +#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l) +#define outsl(p,d,l) __raw_writesl(__ioaddr(p),d,l) + +/* + * 1:1 mapping for ioremapped regions. + */ +#define __mem_pci(x) (x) + +#endif diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/include/asm-arm/arch-s3c2410/irqs.h new file mode 100644 index 00000000000..d9773d69726 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/irqs.h @@ -0,0 +1,126 @@ +/* linux/include/asm-arm/arch-s3c2410/irqs.h + * + * Copyright (c) 2003-2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 12-May-2003 BJD Created file + * 08-Jan-2003 BJD Linux 2.6.0 version, moved BAST bits out + * 12-Mar-2004 BJD Fixed bug in header protection + * 10-Feb-2005 BJD Added camera IRQ from guillaume.gourat@nexvision.tv + * 28-Feb-2005 BJD Updated s3c2440 IRQs + */ + + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H __FILE__ + + +/* we keep the first set of CPU IRQs out of the range of + * the ISA space, so that the PC104 has them to itself + * and we don't end up having to do horrible things to the + * standard ISA drivers.... + */ + +#define S3C2410_CPUIRQ_OFFSET (16) + +#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET) + +/* main cpu interrupts */ +#define IRQ_EINT0 S3C2410_IRQ(0) /* 16 */ +#define IRQ_EINT1 S3C2410_IRQ(1) +#define IRQ_EINT2 S3C2410_IRQ(2) +#define IRQ_EINT3 S3C2410_IRQ(3) +#define IRQ_EINT4t7 S3C2410_IRQ(4) /* 20 */ +#define IRQ_EINT8t23 S3C2410_IRQ(5) +#define IRQ_RESERVED6 S3C2410_IRQ(6) /* for s3c2410 */ +#define IRQ_CAM S3C2410_IRQ(6) /* for s3c2440 */ +#define IRQ_BATT_FLT S3C2410_IRQ(7) +#define IRQ_TICK S3C2410_IRQ(8) /* 24 */ +#define IRQ_WDT S3C2410_IRQ(9) +#define IRQ_TIMER0 S3C2410_IRQ(10) +#define IRQ_TIMER1 S3C2410_IRQ(11) +#define IRQ_TIMER2 S3C2410_IRQ(12) +#define IRQ_TIMER3 S3C2410_IRQ(13) +#define IRQ_TIMER4 S3C2410_IRQ(14) +#define IRQ_UART2 S3C2410_IRQ(15) +#define IRQ_LCD S3C2410_IRQ(16) /* 32 */ +#define IRQ_DMA0 S3C2410_IRQ(17) +#define IRQ_DMA1 S3C2410_IRQ(18) +#define IRQ_DMA2 S3C2410_IRQ(19) +#define IRQ_DMA3 S3C2410_IRQ(20) +#define IRQ_SDI S3C2410_IRQ(21) +#define IRQ_SPI0 S3C2410_IRQ(22) +#define IRQ_UART1 S3C2410_IRQ(23) +#define IRQ_RESERVED24 S3C2410_IRQ(24) /* 40 */ +#define IRQ_NFCON S3C2410_IRQ(24) /* for s3c2440 */ +#define IRQ_USBD S3C2410_IRQ(25) +#define IRQ_USBH S3C2410_IRQ(26) +#define IRQ_IIC S3C2410_IRQ(27) +#define IRQ_UART0 S3C2410_IRQ(28) /* 44 */ +#define IRQ_SPI1 S3C2410_IRQ(29) +#define IRQ_RTC S3C2410_IRQ(30) +#define IRQ_ADCPARENT S3C2410_IRQ(31) + +/* interrupts generated from the external interrupts sources */ +#define IRQ_EINT4 S3C2410_IRQ(32) /* 48 */ +#define IRQ_EINT5 S3C2410_IRQ(33) +#define IRQ_EINT6 S3C2410_IRQ(34) +#define IRQ_EINT7 S3C2410_IRQ(35) +#define IRQ_EINT8 S3C2410_IRQ(36) +#define IRQ_EINT9 S3C2410_IRQ(37) +#define IRQ_EINT10 S3C2410_IRQ(38) +#define IRQ_EINT11 S3C2410_IRQ(39) +#define IRQ_EINT12 S3C2410_IRQ(40) +#define IRQ_EINT13 S3C2410_IRQ(41) +#define IRQ_EINT14 S3C2410_IRQ(42) +#define IRQ_EINT15 S3C2410_IRQ(43) +#define IRQ_EINT16 S3C2410_IRQ(44) +#define IRQ_EINT17 S3C2410_IRQ(45) +#define IRQ_EINT18 S3C2410_IRQ(46) +#define IRQ_EINT19 S3C2410_IRQ(47) +#define IRQ_EINT20 S3C2410_IRQ(48) /* 64 */ +#define IRQ_EINT21 S3C2410_IRQ(49) +#define IRQ_EINT22 S3C2410_IRQ(50) +#define IRQ_EINT23 S3C2410_IRQ(51) + + +#define IRQ_EINT(x) S3C2410_IRQ((x >= 4) ? (IRQ_EINT4 + (x) - 4) : (S3C2410_IRQ(0) + (x))) + +#define IRQ_LCD_FIFO S3C2410_IRQ(52) +#define IRQ_LCD_FRAME S3C2410_IRQ(53) + +/* IRQs for the interal UARTs, and ADC + * these need to be ordered in number of appearance in the + * SUBSRC mask register +*/ +#define IRQ_S3CUART_RX0 S3C2410_IRQ(54) /* 70 */ +#define IRQ_S3CUART_TX0 S3C2410_IRQ(55) /* 71 */ +#define IRQ_S3CUART_ERR0 S3C2410_IRQ(56) + +#define IRQ_S3CUART_RX1 S3C2410_IRQ(57) +#define IRQ_S3CUART_TX1 S3C2410_IRQ(58) +#define IRQ_S3CUART_ERR1 S3C2410_IRQ(59) + +#define IRQ_S3CUART_RX2 S3C2410_IRQ(60) +#define IRQ_S3CUART_TX2 S3C2410_IRQ(61) +#define IRQ_S3CUART_ERR2 S3C2410_IRQ(62) + +#define IRQ_TC S3C2410_IRQ(63) +#define IRQ_ADC S3C2410_IRQ(64) + +/* extra irqs for s3c2440 */ + +#define IRQ_S3C2440_CAM_C S3C2410_IRQ(65) +#define IRQ_S3C2440_CAM_P S3C2410_IRQ(66) +#define IRQ_S3C2440_WDT S3C2410_IRQ(67) +#define IRQ_S3C2440_AC97 S3C2410_IRQ(68) + +#define NR_IRQS (IRQ_S3C2440_AC97+1) + + +#endif /* __ASM_ARCH_IRQ_H */ diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h new file mode 100644 index 00000000000..1833ea5c422 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/map.h @@ -0,0 +1,192 @@ +/* linux/include/asm-arm/arch-s3c2410/map.h + * + * (c) 2003 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 12-May-2003 BJD Created file + * 06-Jan-2003 BJD Linux 2.6.0 version, moved bast specifics out + * 10-Feb-2005 BJD Added CAMIF definition from guillaume.gourat@nexvision.tv + * 10-Mar-2005 LCVR Added support to S3C2400, changed {VA,SZ} names +*/ + +#ifndef __ASM_ARCH_MAP_H +#define __ASM_ARCH_MAP_H + +/* we have a bit of a tight squeeze to fit all our registers from + * 0xF00000000 upwards, since we use all of the nGCS space in some + * capacity, and also need to fit the S3C2410 registers in as well... + * + * we try to ensure stuff like the IRQ registers are available for + * an single MOVS instruction (ie, only 8 bits of set data) + * + * Note, we are trying to remove some of these from the implementation + * as they are only useful to certain drivers... + */ + +#ifndef __ASSEMBLY__ +#define S3C2410_ADDR(x) ((void __iomem *)0xF0000000 + (x)) +#else +#define S3C2410_ADDR(x) (0xF0000000 + (x)) +#endif + +#define S3C2400_ADDR(x) S3C2410_ADDR(x) + +/* interrupt controller is the first thing we put in, to make + * the assembly code for the irq detection easier + */ +#define S3C24XX_VA_IRQ S3C2410_ADDR(0x00000000) +#define S3C2400_PA_IRQ (0x14400000) +#define S3C2410_PA_IRQ (0x4A000000) +#define S3C24XX_SZ_IRQ SZ_1M + +/* memory controller registers */ +#define S3C24XX_VA_MEMCTRL S3C2410_ADDR(0x00100000) +#define S3C2400_PA_MEMCTRL (0x14000000) +#define S3C2410_PA_MEMCTRL (0x48000000) +#define S3C24XX_SZ_MEMCTRL SZ_1M + +/* USB host controller */ +#define S3C24XX_VA_USBHOST S3C2410_ADDR(0x00200000) +#define S3C2400_PA_USBHOST (0x14200000) +#define S3C2410_PA_USBHOST (0x49000000) +#define S3C24XX_SZ_USBHOST SZ_1M + +/* DMA controller */ +#define S3C24XX_VA_DMA S3C2410_ADDR(0x00300000) +#define S3C2400_PA_DMA (0x14600000) +#define S3C2410_PA_DMA (0x4B000000) +#define S3C24XX_SZ_DMA SZ_1M + +/* Clock and Power management */ +#define S3C24XX_VA_CLKPWR S3C2410_ADDR(0x00400000) +#define S3C2400_PA_CLKPWR (0x14800000) +#define S3C2410_PA_CLKPWR (0x4C000000) +#define S3C24XX_SZ_CLKPWR SZ_1M + +/* LCD controller */ +#define S3C24XX_VA_LCD S3C2410_ADDR(0x00600000) +#define S3C2400_PA_LCD (0x14A00000) +#define S3C2410_PA_LCD (0x4D000000) +#define S3C24XX_SZ_LCD SZ_1M + +/* NAND flash controller */ +#define S3C24XX_VA_NAND S3C2410_ADDR(0x00700000) +#define S3C2410_PA_NAND (0x4E000000) +#define S3C24XX_SZ_NAND SZ_1M + +/* MMC controller - available on the S3C2400 */ +#define S3C2400_VA_MMC S3C2400_ADDR(0x00700000) +#define S3C2400_PA_MMC (0x15A00000) +#define S3C2400_SZ_MMC SZ_1M + +/* UARTs */ +#define S3C24XX_VA_UART S3C2410_ADDR(0x00800000) +#define S3C2400_PA_UART (0x15000000) +#define S3C2410_PA_UART (0x50000000) +#define S3C24XX_SZ_UART SZ_1M + +/* Timers */ +#define S3C24XX_VA_TIMER S3C2410_ADDR(0x00900000) +#define S3C2400_PA_TIMER (0x15100000) +#define S3C2410_PA_TIMER (0x51000000) +#define S3C24XX_SZ_TIMER SZ_1M + +/* USB Device port */ +#define S3C24XX_VA_USBDEV S3C2410_ADDR(0x00A00000) +#define S3C2400_PA_USBDEV (0x15200140) +#define S3C2410_PA_USBDEV (0x52000000) +#define S3C24XX_SZ_USBDEV SZ_1M + +/* Watchdog */ +#define S3C24XX_VA_WATCHDOG S3C2410_ADDR(0x00B00000) +#define S3C2400_PA_WATCHDOG (0x15300000) +#define S3C2410_PA_WATCHDOG (0x53000000) +#define S3C24XX_SZ_WATCHDOG SZ_1M + +/* IIC hardware controller */ +#define S3C24XX_VA_IIC S3C2410_ADDR(0x00C00000) +#define S3C2400_PA_IIC (0x15400000) +#define S3C2410_PA_IIC (0x54000000) +#define S3C24XX_SZ_IIC SZ_1M + +#define VA_IIC_BASE (S3C24XX_VA_IIC) + +/* IIS controller */ +#define S3C24XX_VA_IIS S3C2410_ADDR(0x00D00000) +#define S3C2400_PA_IIS (0x15508000) +#define S3C2410_PA_IIS (0x55000000) +#define S3C24XX_SZ_IIS SZ_1M + +/* GPIO ports */ +#define S3C24XX_VA_GPIO S3C2410_ADDR(0x00E00000) +#define S3C2400_PA_GPIO (0x15600000) +#define S3C2410_PA_GPIO (0x56000000) +#define S3C24XX_SZ_GPIO SZ_1M + +/* RTC */ +#define S3C24XX_VA_RTC S3C2410_ADDR(0x00F00000) +#define S3C2400_PA_RTC (0x15700040) +#define S3C2410_PA_RTC (0x57000000) +#define S3C24XX_SZ_RTC SZ_1M + +/* ADC */ +#define S3C24XX_VA_ADC S3C2410_ADDR(0x01000000) +#define S3C2400_PA_ADC (0x15800000) +#define S3C2410_PA_ADC (0x58000000) +#define S3C24XX_SZ_ADC SZ_1M + +/* SPI */ +#define S3C24XX_VA_SPI S3C2410_ADDR(0x01100000) +#define S3C2400_PA_SPI (0x15900000) +#define S3C2410_PA_SPI (0x59000000) +#define S3C24XX_SZ_SPI SZ_1M + +/* SDI */ +#define S3C24XX_VA_SDI S3C2410_ADDR(0x01200000) +#define S3C2410_PA_SDI (0x5A000000) +#define S3C24XX_SZ_SDI SZ_1M + +/* CAMIF */ +#define S3C2440_PA_CAMIF (0x4F000000) +#define S3C2440_SZ_CAMIF SZ_1M + +/* ISA style IO, for each machine to sort out mappings for, if it + * implements it. We reserve two 16M regions for ISA. + */ + +#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000) +#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000) + +/* physical addresses of all the chip-select areas */ + +#define S3C2410_CS0 (0x00000000) +#define S3C2410_CS1 (0x08000000) +#define S3C2410_CS2 (0x10000000) +#define S3C2410_CS3 (0x18000000) +#define S3C2410_CS4 (0x20000000) +#define S3C2410_CS5 (0x28000000) +#define S3C2410_CS6 (0x30000000) +#define S3C2410_CS7 (0x38000000) + +#define S3C2410_SDRAM_PA (S3C2410_CS6) + +#define S3C2400_CS0 (0x00000000) +#define S3C2400_CS1 (0x02000000) +#define S3C2400_CS2 (0x04000000) +#define S3C2400_CS3 (0x06000000) +#define S3C2400_CS4 (0x08000000) +#define S3C2400_CS5 (0x0A000000) +#define S3C2400_CS6 (0x0C000000) +#define S3C2400_CS7 (0x0E000000) + +#define S3C2400_SDRAM_PA (S3C2400_CS6) + + +#endif /* __ASM_ARCH_MAP_H */ diff --git a/include/asm-arm/arch-s3c2410/memory.h b/include/asm-arm/arch-s3c2410/memory.h new file mode 100644 index 00000000000..3380ab1d074 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/memory.h @@ -0,0 +1,44 @@ +/* + * linux/include/asm-arm/arch-s3c2410/memory.h + * + * from linux/include/asm-arm/arch-rpc/memory.h + * + * Copyright (C) 1996,1997,1998 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 20-Oct-1996 RMK Created + * 31-Dec-1997 RMK Fixed definitions to reduce warnings + * 11-Jan-1998 RMK Uninlined to reduce hits on cache + * 08-Feb-1998 RMK Added __virt_to_bus and __bus_to_virt + * 21-Mar-1999 RMK Renamed to memory.h + * RMK Added TASK_SIZE and PAGE_OFFSET + * 05-Apr-2004 BJD Copied and altered for arch-s3c2410 + * 17-Mar-2005 LCVR Modified for S3C2400 +*/ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* + * DRAM starts at 0x30000000 for S3C2410/S3C2440 + * and at 0x0C000000 for S3C2400 + */ +#ifdef CONFIG_CPU_S3C2400 +#define PHYS_OFFSET (0x0C000000UL) +#else +#define PHYS_OFFSET (0x30000000UL) +#endif + +/* + * These are exactly the same on the S3C2410 as the + * physical memory view. +*/ + +#define __virt_to_bus(x) __virt_to_phys(x) +#define __bus_to_virt(x) __phys_to_virt(x) + +#endif diff --git a/include/asm-arm/arch-s3c2410/nand.h b/include/asm-arm/arch-s3c2410/nand.h new file mode 100644 index 00000000000..9148ac045b0 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/nand.h @@ -0,0 +1,48 @@ +/* linux/include/asm-arm/arch-s3c2410/nand.h + * + * (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - NAND device controller platfrom_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 23-Sep-2004 BJD Created file +*/ + +/* struct s3c2410_nand_set + * + * define an set of one or more nand chips registered with an unique mtd + * + * nr_chips = number of chips in this set + * nr_partitions = number of partitions pointed to be partitoons (or zero) + * name = name of set (optional) + * nr_map = map for low-layer logical to physical chip numbers (option) + * partitions = mtd partition list +*/ + +struct s3c2410_nand_set { + int nr_chips; + int nr_partitions; + char *name; + int *nr_map; + struct mtd_partition *partitions; +}; + +struct s3c2410_platform_nand { + /* timing information for controller, all times in nanoseconds */ + + int tacls; /* time for active CLE/ALE to nWE/nOE */ + int twrph0; /* active time for nWE/nOE */ + int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */ + + int nr_sets; + struct s3c2410_nand_set *sets; + + void (*select_chip)(struct s3c2410_nand_set *, + int chip); +}; + diff --git a/include/asm-arm/arch-s3c2410/otom-map.h b/include/asm-arm/arch-s3c2410/otom-map.h new file mode 100644 index 00000000000..e40c9342985 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/otom-map.h @@ -0,0 +1,30 @@ +/* linux/include/asm-arm/arch-s3c2410/otom-map.h + * + * (c) 2005 Guillaume GOURAT / NexVision + * guillaume.gourat@nexvision.fr + * + * NexVision OTOM board memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* needs arch/map.h including with this */ + +/* ok, we've used up to 0x01300000, now we need to find space for the + * peripherals that live in the nGCS[x] areas, which are quite numerous + * in their space. + */ + +#ifndef __ASM_ARCH_OTOMMAP_H +#define __ASM_ARCH_OTOMMAP_H + +#define OTOM_PA_CS8900A_BASE (S3C2410_CS3 + 0x01000000) /* nGCS3 +0x01000000 */ +#define OTOM_VA_CS8900A_BASE S3C2410_ADDR(0x04000000) /* 0xF4000000 */ + +/* physical offset addresses for the peripherals */ + +#define OTOM_PA_FLASH0_BASE (S3C2410_CS0) /* Bank 0 */ + +#endif /* __ASM_ARCH_OTOMMAP_H */ diff --git a/include/asm-arm/arch-s3c2410/param.h b/include/asm-arm/arch-s3c2410/param.h new file mode 100644 index 00000000000..483d3f14988 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/param.h @@ -0,0 +1,27 @@ +/* linux/include/asm-arm/arch-s3c2410/param.h + * + * (c) 2003 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - Machine parameters + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 02-Sep-2003 BJD Created file + * 12-Mar-2004 BJD Added include protection +*/ + +#ifndef __ASM_ARCH_PARAM_H +#define __ASM_ARCH_PARAM_H + +/* we cannot get our timer down to 100Hz with the setup as is, but we can + * manage 200 clock ticks per second... if this is a problem, we can always + * add a software pre-scaler to the evil timer systems. +*/ + +#define HZ 200 + +#endif /* __ASM_ARCH_PARAM_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-adc.h b/include/asm-arm/arch-s3c2410/regs-adc.h new file mode 100644 index 00000000000..15bfc2f5754 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-adc.h @@ -0,0 +1,63 @@ +/* linux/include/asm/arch-s3c2410/regs-adc.h + * + * Copyright (c) 2004 Shannon Holland <holland@loser.net> + * + * This program is free software; yosu can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 ADC registers + * + * Changelog: + * 27-09-2004 SAH Created file +*/ + +#ifndef __ASM_ARCH_REGS_ADC_H +#define __ASM_ARCH_REGS_ADC_H "regs-adc.h" + +#define S3C2410_ADCREG(x) (x) + +#define S3C2410_ADCCON S3C2410_ADCREG(0x00) +#define S3C2410_ADCTSC S3C2410_ADCREG(0x04) +#define S3C2410_ADCDLY S3C2410_ADCREG(0x08) +#define S3C2410_ADCDAT0 S3C2410_ADCREG(0x0C) +#define S3C2410_ADCDAT1 S3C2410_ADCREG(0x10) + + +/* ADCCON Register Bits */ +#define S3C2410_ADCCON_ECFLG (1<<15) +#define S3C2410_ADCCON_PRSCEN (1<<14) +#define S3C2410_ADCCON_PRSCVL(x) (((x)&0xFF)<<6) +#define S3C2410_ADCCON_PRSCVLMASK (0xFF<<6) +#define S3C2410_ADCCON_SELMUX(x) (((x)&0x7)<<3) +#define S3C2410_ADCCON_MUXMASK (0x7<<3) +#define S3C2410_ADCCON_STDBM (1<<2) +#define S3C2410_ADCCON_READ_START (1<<1) +#define S3C2410_ADCCON_ENABLE_START (1<<0) +#define S3C2410_ADCCON_STARTMASK (0x3<<0) + + +/* ADCTSC Register Bits */ +#define S3C2410_ADCTSC_YM_SEN (1<<7) +#define S3C2410_ADCTSC_YP_SEN (1<<6) +#define S3C2410_ADCTSC_XM_SEN (1<<5) +#define S3C2410_ADCTSC_XP_SEN (1<<4) +#define S3C2410_ADCTSC_PULL_UP_DISABLE (1<<3) +#define S3C2410_ADCTSC_AUTO_PST (1<<2) +#define S3C2410_ADCTSC_XY_PST (0x3<<0) + +/* ADCDAT0 Bits */ +#define S3C2410_ADCDAT0_UPDOWN (1<<15) +#define S3C2410_ADCDAT0_AUTO_PST (1<<14) +#define S3C2410_ADCDAT0_XY_PST (0x3<<12) +#define S3C2410_ADCDAT0_XPDATA_MASK (0x03FF) + +/* ADCDAT1 Bits */ +#define S3C2410_ADCDAT1_UPDOWN (1<<15) +#define S3C2410_ADCDAT1_AUTO_PST (1<<14) +#define S3C2410_ADCDAT1_XY_PST (0x3<<12) +#define S3C2410_ADCDAT1_YPDATA_MASK (0x03FF) + +#endif /* __ASM_ARCH_REGS_ADC_H */ + + diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h new file mode 100644 index 00000000000..e5e938b79ac --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-clock.h @@ -0,0 +1,122 @@ +/* linux/include/asm/arch-s3c2410/regs-clock.h + * + * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 clock register definitions + * + * Changelog: + * 18-Aug-2004 Ben Dooks Added 2440 definitions + * 08-Aug-2004 Herbert Pötzl Added CLKCON definitions + * 19-06-2003 Ben Dooks Created file + * 12-03-2004 Ben Dooks Updated include protection + * 29-Sep-2004 Ben Dooks Fixed usage for assembly inclusion + * 10-Feb-2005 Ben Dooks Fixed CAMDIVN address (Guillaume Gourat) + * 10-Mar-2005 Lucas Villa Real Changed S3C2410_VA to S3C24XX_VA + */ + +#ifndef __ASM_ARM_REGS_CLOCK +#define __ASM_ARM_REGS_CLOCK "$Id: clock.h,v 1.4 2003/04/30 14:50:51 ben Exp $" + +#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR) + +#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s))) + +#define S3C2410_LOCKTIME S3C2410_CLKREG(0x00) +#define S3C2410_MPLLCON S3C2410_CLKREG(0x04) +#define S3C2410_UPLLCON S3C2410_CLKREG(0x08) +#define S3C2410_CLKCON S3C2410_CLKREG(0x0C) +#define S3C2410_CLKSLOW S3C2410_CLKREG(0x10) +#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14) + +#define S3C2410_CLKCON_IDLE (1<<2) +#define S3C2410_CLKCON_POWER (1<<3) +#define S3C2410_CLKCON_NAND (1<<4) +#define S3C2410_CLKCON_LCDC (1<<5) +#define S3C2410_CLKCON_USBH (1<<6) +#define S3C2410_CLKCON_USBD (1<<7) +#define S3C2410_CLKCON_PWMT (1<<8) +#define S3C2410_CLKCON_SDI (1<<9) +#define S3C2410_CLKCON_UART0 (1<<10) +#define S3C2410_CLKCON_UART1 (1<<11) +#define S3C2410_CLKCON_UART2 (1<<12) +#define S3C2410_CLKCON_GPIO (1<<13) +#define S3C2410_CLKCON_RTC (1<<14) +#define S3C2410_CLKCON_ADC (1<<15) +#define S3C2410_CLKCON_IIC (1<<16) +#define S3C2410_CLKCON_IIS (1<<17) +#define S3C2410_CLKCON_SPI (1<<18) + +#define S3C2410_PLLCON_MDIVSHIFT 12 +#define S3C2410_PLLCON_PDIVSHIFT 4 +#define S3C2410_PLLCON_SDIVSHIFT 0 +#define S3C2410_PLLCON_MDIVMASK ((1<<(1+(19-12)))-1) +#define S3C2410_PLLCON_PDIVMASK ((1<<5)-1) +#define S3C2410_PLLCON_SDIVMASK 3 + +/* DCLKCON register addresses in gpio.h */ + +#define S3C2410_DCLKCON_DCLK0EN (1<<0) +#define S3C2410_DCLKCON_DCLK0_PCLK (0<<1) +#define S3C2410_DCLKCON_DCLK0_UCLK (1<<1) +#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4) +#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8) + +#define S3C2410_DCLKCON_DCLK1EN (1<<16) +#define S3C2410_DCLKCON_DCLK1_PCLK (0<<17) +#define S3C2410_DCLKCON_DCLK1_UCLK (1<<17) +#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20) + +#define S3C2410_CLKDIVN_PDIVN (1<<0) +#define S3C2410_CLKDIVN_HDIVN (1<<1) + +#ifndef __ASSEMBLY__ + +static inline unsigned int +s3c2410_get_pll(int pllval, int baseclk) +{ + int mdiv, pdiv, sdiv; + + mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT; + pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT; + sdiv = pllval >> S3C2410_PLLCON_SDIVSHIFT; + + mdiv &= S3C2410_PLLCON_MDIVMASK; + pdiv &= S3C2410_PLLCON_PDIVMASK; + sdiv &= S3C2410_PLLCON_SDIVMASK; + + return (baseclk * (mdiv + 8)) / ((pdiv + 2) << sdiv); +} + +#endif /* __ASSEMBLY__ */ + +#ifdef CONFIG_CPU_S3C2440 + +/* extra registers */ +#define S3C2440_CAMDIVN S3C2410_CLKREG(0x18) + +#define S3C2440_CLKCON_CAMERA (1<<19) +#define S3C2440_CLKCON_AC97 (1<<20) + +#define S3C2440_CLKDIVN_PDIVN (1<<0) +#define S3C2440_CLKDIVN_HDIVN_MASK (3<<1) +#define S3C2440_CLKDIVN_HDIVN_1 (0<<1) +#define S3C2440_CLKDIVN_HDIVN_2 (1<<1) +#define S3C2440_CLKDIVN_HDIVN_4_8 (2<<1) +#define S3C2440_CLKDIVN_HDIVN_3_6 (3<<1) +#define S3C2440_CLKDIVN_UCLK (1<<3) + +#define S3C2440_CAMDIVN_CAMCLK_MASK (0xf<<0) +#define S3C2440_CAMDIVN_CAMCLK_SEL (1<<4) +#define S3C2440_CAMDIVN_HCLK3_HALF (1<<8) +#define S3C2440_CAMDIVN_HCLK4_HALF (1<<9) +#define S3C2440_CAMDIVN_DVSEN (1<<12) + +#endif /* CONFIG_CPU_S3C2440 */ + + +#endif /* __ASM_ARM_REGS_CLOCK */ diff --git a/include/asm-arm/arch-s3c2410/regs-dsc.h b/include/asm-arm/arch-s3c2410/regs-dsc.h new file mode 100644 index 00000000000..a023b0434ef --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-dsc.h @@ -0,0 +1,183 @@ +/* linux/include/asm/hardware/s3c2410/regs-dsc.h + * + * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2440 Signal Drive Strength Control + * + * Changelog: + * 11-Aug-2004 BJD Created file + * 25-Aug-2004 BJD Added the _SELECT_* defs for using with functions +*/ + + +#ifndef __ASM_ARCH_REGS_DSC_H +#define __ASM_ARCH_REGS_DSC_H "2440-dsc" + +#ifdef CONFIG_CPU_S3C2440 + +#define S3C2440_DSC0 S3C2410_GPIOREG(0xc4) +#define S3C2440_DSC1 S3C2410_GPIOREG(0xc8) + +#define S3C2440_SELECT_DSC0 (0) +#define S3C2440_SELECT_DSC1 (1<<31) + +#define S3C2440_DSC_GETSHIFT(x) ((x) & 31) + +#define S3C2440_DSC0_DISABLE (1<<31) + +#define S3C2440_DSC0_ADDR (S3C2440_SELECT_DSC0 | 8) +#define S3C2440_DSC0_ADDR_12mA (0<<8) +#define S3C2440_DSC0_ADDR_10mA (1<<8) +#define S3C2440_DSC0_ADDR_8mA (2<<8) +#define S3C2440_DSC0_ADDR_6mA (3<<8) +#define S3C2440_DSC0_ADDR_MASK (3<<8) + +/* D24..D31 */ +#define S3C2440_DSC0_DATA3 (S3C2440_SELECT_DSC0 | 6) +#define S3C2440_DSC0_DATA3_12mA (0<<6) +#define S3C2440_DSC0_DATA3_10mA (1<<6) +#define S3C2440_DSC0_DATA3_8mA (2<<6) +#define S3C2440_DSC0_DATA3_6mA (3<<6) +#define S3C2440_DSC0_DATA3_MASK (3<<6) + +/* D16..D23 */ +#define S3C2440_DSC0_DATA2 (S3C2440_SELECT_DSC0 | 4) +#define S3C2440_DSC0_DATA2_12mA (0<<4) +#define S3C2440_DSC0_DATA2_10mA (1<<4) +#define S3C2440_DSC0_DATA2_8mA (2<<4) +#define S3C2440_DSC0_DATA2_6mA (3<<4) +#define S3C2440_DSC0_DATA2_MASK (3<<4) + +/* D8..D15 */ +#define S3C2440_DSC0_DATA1 (S3C2440_SELECT_DSC0 | 2) +#define S3C2440_DSC0_DATA1_12mA (0<<2) +#define S3C2440_DSC0_DATA1_10mA (1<<2) +#define S3C2440_DSC0_DATA1_8mA (2<<2) +#define S3C2440_DSC0_DATA1_6mA (3<<2) +#define S3C2440_DSC0_DATA1_MASK (3<<2) + +/* D0..D7 */ +#define S3C2440_DSC0_DATA0 (S3C2440_SELECT_DSC0 | 0) +#define S3C2440_DSC0_DATA0_12mA (0<<0) +#define S3C2440_DSC0_DATA0_10mA (1<<0) +#define S3C2440_DSC0_DATA0_8mA (2<<0) +#define S3C2440_DSC0_DATA0_6mA (3<<0) +#define S3C2440_DSC0_DATA0_MASK (3<<0) + +#define S3C2440_DSC1_SCK1 (S3C2440_SELECT_DSC1 | 28) +#define S3C2440_DSC1_SCK1_12mA (0<<28) +#define S3C2440_DSC1_SCK1_10mA (1<<28) +#define S3C2440_DSC1_SCK1_8mA (2<<28) +#define S3C2440_DSC1_SCK1_6mA (3<<28) +#define S3C2440_DSC1_SCK1_MASK (3<<28) + +#define S3C2440_DSC1_SCK0 (S3C2440_SELECT_DSC1 | 26) +#define S3C2440_DSC1_SCK0_12mA (0<<26) +#define S3C2440_DSC1_SCK0_10mA (1<<26) +#define S3C2440_DSC1_SCK0_8mA (2<<26) +#define S3C2440_DSC1_SCK0_6mA (3<<26) +#define S3C2440_DSC1_SCK0_MASK (3<<26) + +#define S3C2440_DSC1_SCKE (S3C2440_SELECT_DSC1 | 24) +#define S3C2440_DSC1_SCKE_10mA (0<<24) +#define S3C2440_DSC1_SCKE_8mA (1<<24) +#define S3C2440_DSC1_SCKE_6mA (2<<24) +#define S3C2440_DSC1_SCKE_4mA (3<<24) +#define S3C2440_DSC1_SCKE_MASK (3<<24) + +/* SDRAM nRAS/nCAS */ +#define S3C2440_DSC1_SDR (S3C2440_SELECT_DSC1 | 22) +#define S3C2440_DSC1_SDR_10mA (0<<22) +#define S3C2440_DSC1_SDR_8mA (1<<22) +#define S3C2440_DSC1_SDR_6mA (2<<22) +#define S3C2440_DSC1_SDR_4mA (3<<22) +#define S3C2440_DSC1_SDR_MASK (3<<22) + +/* NAND Flash Controller */ +#define S3C2440_DSC1_NFC (S3C2440_SELECT_DSC1 | 20) +#define S3C2440_DSC1_NFC_10mA (0<<20) +#define S3C2440_DSC1_NFC_8mA (1<<20) +#define S3C2440_DSC1_NFC_6mA (2<<20) +#define S3C2440_DSC1_NFC_4mA (3<<20) +#define S3C2440_DSC1_NFC_MASK (3<<20) + +/* nBE[0..3] */ +#define S3C2440_DSC1_nBE (S3C2440_SELECT_DSC1 | 18) +#define S3C2440_DSC1_nBE_10mA (0<<18) +#define S3C2440_DSC1_nBE_8mA (1<<18) +#define S3C2440_DSC1_nBE_6mA (2<<18) +#define S3C2440_DSC1_nBE_4mA (3<<18) +#define S3C2440_DSC1_nBE_MASK (3<<18) + +#define S3C2440_DSC1_WOE (S3C2440_SELECT_DSC1 | 16) +#define S3C2440_DSC1_WOE_10mA (0<<16) +#define S3C2440_DSC1_WOE_8mA (1<<16) +#define S3C2440_DSC1_WOE_6mA (2<<16) +#define S3C2440_DSC1_WOE_4mA (3<<16) +#define S3C2440_DSC1_WOE_MASK (3<<16) + +#define S3C2440_DSC1_CS7 (S3C2440_SELECT_DSC1 | 14) +#define S3C2440_DSC1_CS7_10mA (0<<14) +#define S3C2440_DSC1_CS7_8mA (1<<14) +#define S3C2440_DSC1_CS7_6mA (2<<14) +#define S3C2440_DSC1_CS7_4mA (3<<14) +#define S3C2440_DSC1_CS7_MASK (3<<14) + +#define S3C2440_DSC1_CS6 (S3C2440_SELECT_DSC1 | 12) +#define S3C2440_DSC1_CS6_10mA (0<<12) +#define S3C2440_DSC1_CS6_8mA (1<<12) +#define S3C2440_DSC1_CS6_6mA (2<<12) +#define S3C2440_DSC1_CS6_4mA (3<<12) +#define S3C2440_DSC1_CS6_MASK (3<<12) + +#define S3C2440_DSC1_CS5 (S3C2440_SELECT_DSC1 | 10) +#define S3C2440_DSC1_CS5_10mA (0<<10) +#define S3C2440_DSC1_CS5_8mA (1<<10) +#define S3C2440_DSC1_CS5_6mA (2<<10) +#define S3C2440_DSC1_CS5_4mA (3<<10) +#define S3C2440_DSC1_CS5_MASK (3<<10) + +#define S3C2440_DSC1_CS4 (S3C2440_SELECT_DSC1 | 8) +#define S3C2440_DSC1_CS4_10mA (0<<8) +#define S3C2440_DSC1_CS4_8mA (1<<8) +#define S3C2440_DSC1_CS4_6mA (2<<8) +#define S3C2440_DSC1_CS4_4mA (3<<8) +#define S3C2440_DSC1_CS4_MASK (3<<8) + +#define S3C2440_DSC1_CS3 (S3C2440_SELECT_DSC1 | 6) +#define S3C2440_DSC1_CS3_10mA (0<<6) +#define S3C2440_DSC1_CS3_8mA (1<<6) +#define S3C2440_DSC1_CS3_6mA (2<<6) +#define S3C2440_DSC1_CS3_4mA (3<<6) +#define S3C2440_DSC1_CS3_MASK (3<<6) + +#define S3C2440_DSC1_CS2 (S3C2440_SELECT_DSC1 | 4) +#define S3C2440_DSC1_CS2_10mA (0<<4) +#define S3C2440_DSC1_CS2_8mA (1<<4) +#define S3C2440_DSC1_CS2_6mA (2<<4) +#define S3C2440_DSC1_CS2_4mA (3<<4) +#define S3C2440_DSC1_CS2_MASK (3<<4) + +#define S3C2440_DSC1_CS1 (S3C2440_SELECT_DSC1 | 2) +#define S3C2440_DSC1_CS1_10mA (0<<2) +#define S3C2440_DSC1_CS1_8mA (1<<2) +#define S3C2440_DSC1_CS1_6mA (2<<2) +#define S3C2440_DSC1_CS1_4mA (3<<2) +#define S3C2440_DSC1_CS1_MASK (3<<2) + +#define S3C2440_DSC1_CS0 (S3C2440_SELECT_DSC1 | 0 +#define S3C2440_DSC1_CS0_10mA (0<<0) +#define S3C2440_DSC1_CS0_8mA (1<<0) +#define S3C2440_DSC1_CS0_6mA (2<<0) +#define S3C2440_DSC1_CS0_4mA (3<<0) +#define S3C2440_DSC1_CS0_MASK (3<<0) + +#endif /* CONFIG_CPU_S3C2440 */ + +#endif /* __ASM_ARCH_REGS_DSC_H */ + diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h new file mode 100644 index 00000000000..2053cbacffc --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-gpio.h @@ -0,0 +1,831 @@ +/* linux/include/asm/hardware/s3c2410/regs-gpio.h + * + * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 GPIO register definitions + * + * Changelog: + * 19-06-2003 BJD Created file + * 23-06-2003 BJD Updated GSTATUS registers + * 12-03-2004 BJD Updated include protection + * 20-07-2004 BJD Added GPIO pin numbers, added Port A definitions + * 04-10-2004 BJD Fixed number of bugs, added EXT IRQ filter defs + * 17-10-2004 BJD Added GSTATUS1 register definitions + * 18-11-2004 BJD Fixed definitions of GPE3, GPE4, GPE5 and GPE6 + * 18-11-2004 BJD Added S3C2440 AC97 controls + * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA + * 28-Mar-2005 LCVR Fixed definition of GPB10 +*/ + + +#ifndef __ASM_ARCH_REGS_GPIO_H +#define __ASM_ARCH_REGS_GPIO_H "$Id: gpio.h,v 1.5 2003/05/19 12:51:08 ben Exp $" + +#define S3C2410_GPIONO(bank,offset) ((bank) + (offset)) + +#define S3C2410_GPIO_BANKA (32*0) +#define S3C2410_GPIO_BANKB (32*1) +#define S3C2410_GPIO_BANKC (32*2) +#define S3C2410_GPIO_BANKD (32*3) +#define S3C2410_GPIO_BANKE (32*4) +#define S3C2410_GPIO_BANKF (32*5) +#define S3C2410_GPIO_BANKG (32*6) +#define S3C2410_GPIO_BANKH (32*7) + +#define S3C2410_GPIO_BASE(pin) ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO) +#define S3C2410_GPIO_OFFSET(pin) ((pin) & 31) + +/* general configuration options */ + +#define S3C2410_GPIO_LEAVE (0xFFFFFFFF) + +/* configure GPIO ports A..G */ + +#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO) + +/* port A - 22bits, zero in bit X makes pin X output + * 1 makes port special function, this is default +*/ +#define S3C2410_GPACON S3C2410_GPIOREG(0x00) +#define S3C2410_GPADAT S3C2410_GPIOREG(0x04) + +#define S3C2410_GPA0 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0) +#define S3C2410_GPA0_OUT (0<<0) +#define S3C2410_GPA0_ADDR0 (1<<0) + +#define S3C2410_GPA1 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1) +#define S3C2410_GPA1_OUT (0<<1) +#define S3C2410_GPA1_ADDR16 (1<<1) + +#define S3C2410_GPA2 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2) +#define S3C2410_GPA2_OUT (0<<2) +#define S3C2410_GPA2_ADDR17 (1<<2) + +#define S3C2410_GPA3 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3) +#define S3C2410_GPA3_OUT (0<<3) +#define S3C2410_GPA3_ADDR18 (1<<3) + +#define S3C2410_GPA4 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4) +#define S3C2410_GPA4_OUT (0<<4) +#define S3C2410_GPA4_ADDR19 (1<<4) + +#define S3C2410_GPA5 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5) +#define S3C2410_GPA5_OUT (0<<5) +#define S3C2410_GPA5_ADDR20 (1<<5) + +#define S3C2410_GPA6 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6) +#define S3C2410_GPA6_OUT (0<<6) +#define S3C2410_GPA6_ADDR21 (1<<6) + +#define S3C2410_GPA7 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7) +#define S3C2410_GPA7_OUT (0<<7) +#define S3C2410_GPA7_ADDR22 (1<<7) + +#define S3C2410_GPA8 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8) +#define S3C2410_GPA8_OUT (0<<8) +#define S3C2410_GPA8_ADDR23 (1<<8) + +#define S3C2410_GPA9 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9) +#define S3C2410_GPA9_OUT (0<<9) +#define S3C2410_GPA9_ADDR24 (1<<9) + +#define S3C2410_GPA10 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10) +#define S3C2410_GPA10_OUT (0<<10) +#define S3C2410_GPA10_ADDR25 (1<<10) + +#define S3C2410_GPA11 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11) +#define S3C2410_GPA11_OUT (0<<11) +#define S3C2410_GPA11_ADDR26 (1<<11) + +#define S3C2410_GPA12 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12) +#define S3C2410_GPA12_OUT (0<<12) +#define S3C2410_GPA12_nGCS1 (1<<12) + +#define S3C2410_GPA13 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13) +#define S3C2410_GPA13_OUT (0<<13) +#define S3C2410_GPA13_nGCS2 (1<<13) + +#define S3C2410_GPA14 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14) +#define S3C2410_GPA14_OUT (0<<14) +#define S3C2410_GPA14_nGCS3 (1<<14) + +#define S3C2410_GPA15 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15) +#define S3C2410_GPA15_OUT (0<<15) +#define S3C2410_GPA15_nGCS4 (1<<15) + +#define S3C2410_GPA16 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16) +#define S3C2410_GPA16_OUT (0<<16) +#define S3C2410_GPA16_nGCS5 (1<<16) + +#define S3C2410_GPA17 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17) +#define S3C2410_GPA17_OUT (0<<17) +#define S3C2410_GPA17_CLE (1<<17) + +#define S3C2410_GPA18 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18) +#define S3C2410_GPA18_OUT (0<<18) +#define S3C2410_GPA18_ALE (1<<18) + +#define S3C2410_GPA19 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19) +#define S3C2410_GPA19_OUT (0<<19) +#define S3C2410_GPA19_nFWE (1<<19) + +#define S3C2410_GPA20 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20) +#define S3C2410_GPA20_OUT (0<<20) +#define S3C2410_GPA20_nFRE (1<<20) + +#define S3C2410_GPA21 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21) +#define S3C2410_GPA21_OUT (0<<21) +#define S3C2410_GPA21_nRSTOUT (1<<21) + +#define S3C2410_GPA22 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22) +#define S3C2410_GPA22_OUT (0<<22) +#define S3C2410_GPA22_nFCE (1<<22) + +/* 0x08 and 0x0c are reserved */ + +/* GPB is 10 IO pins, each configured by 2 bits each in GPBCON. + * 00 = input, 01 = output, 10=special function, 11=reserved + * bit 0,1 = pin 0, 2,3= pin 1... + * + * CPBUP = pull up resistor control, 1=disabled, 0=enabled +*/ + +#define S3C2410_GPBCON S3C2410_GPIOREG(0x10) +#define S3C2410_GPBDAT S3C2410_GPIOREG(0x14) +#define S3C2410_GPBUP S3C2410_GPIOREG(0x18) + +/* no i/o pin in port b can have value 3! */ + +#define S3C2410_GPB0 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0) +#define S3C2410_GPB0_INP (0x00 << 0) +#define S3C2410_GPB0_OUTP (0x01 << 0) +#define S3C2410_GPB0_TOUT0 (0x02 << 0) + +#define S3C2410_GPB1 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1) +#define S3C2410_GPB1_INP (0x00 << 2) +#define S3C2410_GPB1_OUTP (0x01 << 2) +#define S3C2410_GPB1_TOUT1 (0x02 << 2) + +#define S3C2410_GPB2 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2) +#define S3C2410_GPB2_INP (0x00 << 4) +#define S3C2410_GPB2_OUTP (0x01 << 4) +#define S3C2410_GPB2_TOUT2 (0x02 << 4) + +#define S3C2410_GPB3 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3) +#define S3C2410_GPB3_INP (0x00 << 6) +#define S3C2410_GPB3_OUTP (0x01 << 6) +#define S3C2410_GPB3_TOUT3 (0x02 << 6) + +#define S3C2410_GPB4 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4) +#define S3C2410_GPB4_INP (0x00 << 8) +#define S3C2410_GPB4_OUTP (0x01 << 8) +#define S3C2410_GPB4_TCLK0 (0x02 << 8) +#define S3C2410_GPB4_MASK (0x03 << 8) + +#define S3C2410_GPB5 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5) +#define S3C2410_GPB5_INP (0x00 << 10) +#define S3C2410_GPB5_OUTP (0x01 << 10) +#define S3C2410_GPB5_nXBACK (0x02 << 10) + +#define S3C2410_GPB6 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6) +#define S3C2410_GPB6_INP (0x00 << 12) +#define S3C2410_GPB6_OUTP (0x01 << 12) +#define S3C2410_GPB6_nXBREQ (0x02 << 12) + +#define S3C2410_GPB7 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7) +#define S3C2410_GPB7_INP (0x00 << 14) +#define S3C2410_GPB7_OUTP (0x01 << 14) +#define S3C2410_GPB7_nXDACK1 (0x02 << 14) + +#define S3C2410_GPB8 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8) +#define S3C2410_GPB8_INP (0x00 << 16) +#define S3C2410_GPB8_OUTP (0x01 << 16) +#define S3C2410_GPB8_nXDREQ1 (0x02 << 16) + +#define S3C2410_GPB9 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9) +#define S3C2410_GPB9_INP (0x00 << 18) +#define S3C2410_GPB9_OUTP (0x01 << 18) +#define S3C2410_GPB9_nXDACK0 (0x02 << 18) + +#define S3C2410_GPB10 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10) +#define S3C2410_GPB10_INP (0x00 << 20) +#define S3C2410_GPB10_OUTP (0x01 << 20) +#define S3C2410_GPB10_nXDRE0 (0x02 << 20) + +/* Port C consits of 16 GPIO/Special function + * + * almost identical setup to port b, but the special functions are mostly + * to do with the video system's sync/etc. +*/ + +#define S3C2410_GPCCON S3C2410_GPIOREG(0x20) +#define S3C2410_GPCDAT S3C2410_GPIOREG(0x24) +#define S3C2410_GPCUP S3C2410_GPIOREG(0x28) + +#define S3C2410_GPC0 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0) +#define S3C2410_GPC0_INP (0x00 << 0) +#define S3C2410_GPC0_OUTP (0x01 << 0) +#define S3C2410_GPC0_LEND (0x02 << 0) + +#define S3C2410_GPC1 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1) +#define S3C2410_GPC1_INP (0x00 << 2) +#define S3C2410_GPC1_OUTP (0x01 << 2) +#define S3C2410_GPC1_VCLK (0x02 << 2) + +#define S3C2410_GPC2 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2) +#define S3C2410_GPC2_INP (0x00 << 4) +#define S3C2410_GPC2_OUTP (0x01 << 4) +#define S3C2410_GPC2_VLINE (0x02 << 4) + +#define S3C2410_GPC3 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3) +#define S3C2410_GPC3_INP (0x00 << 6) +#define S3C2410_GPC3_OUTP (0x01 << 6) +#define S3C2410_GPC3_VFRAME (0x02 << 6) + +#define S3C2410_GPC4 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4) +#define S3C2410_GPC4_INP (0x00 << 8) +#define S3C2410_GPC4_OUTP (0x01 << 8) +#define S3C2410_GPC4_VM (0x02 << 8) + +#define S3C2410_GPC5 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5) +#define S3C2410_GPC5_INP (0x00 << 10) +#define S3C2410_GPC5_OUTP (0x01 << 10) +#define S3C2410_GPC5_LCDVF0 (0x02 << 10) + +#define S3C2410_GPC6 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6) +#define S3C2410_GPC6_INP (0x00 << 12) +#define S3C2410_GPC6_OUTP (0x01 << 12) +#define S3C2410_GPC6_LCDVF1 (0x02 << 12) + +#define S3C2410_GPC7 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7) +#define S3C2410_GPC7_INP (0x00 << 14) +#define S3C2410_GPC7_OUTP (0x01 << 14) +#define S3C2410_GPC7_LCDVF2 (0x02 << 14) + +#define S3C2410_GPC8 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8) +#define S3C2410_GPC8_INP (0x00 << 16) +#define S3C2410_GPC8_OUTP (0x01 << 16) +#define S3C2410_GPC8_VD0 (0x02 << 16) + +#define S3C2410_GPC9 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9) +#define S3C2410_GPC9_INP (0x00 << 18) +#define S3C2410_GPC9_OUTP (0x01 << 18) +#define S3C2410_GPC9_VD1 (0x02 << 18) + +#define S3C2410_GPC10 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10) +#define S3C2410_GPC10_INP (0x00 << 20) +#define S3C2410_GPC10_OUTP (0x01 << 20) +#define S3C2410_GPC10_VD2 (0x02 << 20) + +#define S3C2410_GPC11 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11) +#define S3C2410_GPC11_INP (0x00 << 22) +#define S3C2410_GPC11_OUTP (0x01 << 22) +#define S3C2410_GPC11_VD3 (0x02 << 22) + +#define S3C2410_GPC12 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12) +#define S3C2410_GPC12_INP (0x00 << 24) +#define S3C2410_GPC12_OUTP (0x01 << 24) +#define S3C2410_GPC12_VD4 (0x02 << 24) + +#define S3C2410_GPC13 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13) +#define S3C2410_GPC13_INP (0x00 << 26) +#define S3C2410_GPC13_OUTP (0x01 << 26) +#define S3C2410_GPC13_VD5 (0x02 << 26) + +#define S3C2410_GPC14 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14) +#define S3C2410_GPC14_INP (0x00 << 28) +#define S3C2410_GPC14_OUTP (0x01 << 28) +#define S3C2410_GPC14_VD6 (0x02 << 28) + +#define S3C2410_GPC15 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15) +#define S3C2410_GPC15_INP (0x00 << 30) +#define S3C2410_GPC15_OUTP (0x01 << 30) +#define S3C2410_GPC15_VD7 (0x02 << 30) + +/* Port D consists of 16 GPIO/Special function + * + * almost identical setup to port b, but the special functions are mostly + * to do with the video system's data. +*/ + +#define S3C2410_GPDCON S3C2410_GPIOREG(0x30) +#define S3C2410_GPDDAT S3C2410_GPIOREG(0x34) +#define S3C2410_GPDUP S3C2410_GPIOREG(0x38) + +#define S3C2410_GPD0 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0) +#define S3C2410_GPD0_INP (0x00 << 0) +#define S3C2410_GPD0_OUTP (0x01 << 0) +#define S3C2410_GPD0_VD8 (0x02 << 0) + +#define S3C2410_GPD1 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1) +#define S3C2410_GPD1_INP (0x00 << 2) +#define S3C2410_GPD1_OUTP (0x01 << 2) +#define S3C2410_GPD1_VD9 (0x02 << 2) + +#define S3C2410_GPD2 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2) +#define S3C2410_GPD2_INP (0x00 << 4) +#define S3C2410_GPD2_OUTP (0x01 << 4) +#define S3C2410_GPD2_VD10 (0x02 << 4) + +#define S3C2410_GPD3 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3) +#define S3C2410_GPD3_INP (0x00 << 6) +#define S3C2410_GPD3_OUTP (0x01 << 6) +#define S3C2410_GPD3_VD11 (0x02 << 6) + +#define S3C2410_GPD4 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4) +#define S3C2410_GPD4_INP (0x00 << 8) +#define S3C2410_GPD4_OUTP (0x01 << 8) +#define S3C2410_GPD4_VD12 (0x02 << 8) + +#define S3C2410_GPD5 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5) +#define S3C2410_GPD5_INP (0x00 << 10) +#define S3C2410_GPD5_OUTP (0x01 << 10) +#define S3C2410_GPD5_VD13 (0x02 << 10) + +#define S3C2410_GPD6 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6) +#define S3C2410_GPD6_INP (0x00 << 12) +#define S3C2410_GPD6_OUTP (0x01 << 12) +#define S3C2410_GPD6_VD14 (0x02 << 12) + +#define S3C2410_GPD7 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7) +#define S3C2410_GPD7_INP (0x00 << 14) +#define S3C2410_GPD7_OUTP (0x01 << 14) +#define S3C2410_GPD7_VD15 (0x02 << 14) + +#define S3C2410_GPD8 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8) +#define S3C2410_GPD8_INP (0x00 << 16) +#define S3C2410_GPD8_OUTP (0x01 << 16) +#define S3C2410_GPD8_VD16 (0x02 << 16) + +#define S3C2410_GPD9 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9) +#define S3C2410_GPD9_INP (0x00 << 18) +#define S3C2410_GPD9_OUTP (0x01 << 18) +#define S3C2410_GPD9_VD17 (0x02 << 18) + +#define S3C2410_GPD10 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10) +#define S3C2410_GPD10_INP (0x00 << 20) +#define S3C2410_GPD10_OUTP (0x01 << 20) +#define S3C2410_GPD10_VD18 (0x02 << 20) + +#define S3C2410_GPD11 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11) +#define S3C2410_GPD11_INP (0x00 << 22) +#define S3C2410_GPD11_OUTP (0x01 << 22) +#define S3C2410_GPD11_VD19 (0x02 << 22) + +#define S3C2410_GPD12 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12) +#define S3C2410_GPD12_INP (0x00 << 24) +#define S3C2410_GPD12_OUTP (0x01 << 24) +#define S3C2410_GPD12_VD20 (0x02 << 24) + +#define S3C2410_GPD13 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13) +#define S3C2410_GPD13_INP (0x00 << 26) +#define S3C2410_GPD13_OUTP (0x01 << 26) +#define S3C2410_GPD13_VD21 (0x02 << 26) + +#define S3C2410_GPD14 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14) +#define S3C2410_GPD14_INP (0x00 << 28) +#define S3C2410_GPD14_OUTP (0x01 << 28) +#define S3C2410_GPD14_VD22 (0x02 << 28) + +#define S3C2410_GPD15 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15) +#define S3C2410_GPD15_INP (0x00 << 30) +#define S3C2410_GPD15_OUTP (0x01 << 30) +#define S3C2410_GPD15_VD23 (0x02 << 30) + +/* Port E consists of 16 GPIO/Special function + * + * again, the same as port B, but dealing with I2S, SDI, and + * more miscellaneous functions +*/ + +#define S3C2410_GPECON S3C2410_GPIOREG(0x40) +#define S3C2410_GPEDAT S3C2410_GPIOREG(0x44) +#define S3C2410_GPEUP S3C2410_GPIOREG(0x48) + +#define S3C2410_GPE0 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0) +#define S3C2410_GPE0_INP (0x00 << 0) +#define S3C2410_GPE0_OUTP (0x01 << 0) +#define S3C2410_GPE0_I2SLRCK (0x02 << 0) +#define S3C2410_GPE0_MASK (0x03 << 0) + +#define S3C2410_GPE1 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1) +#define S3C2410_GPE1_INP (0x00 << 2) +#define S3C2410_GPE1_OUTP (0x01 << 2) +#define S3C2410_GPE1_I2SSCLK (0x02 << 2) +#define S3C2410_GPE1_MASK (0x03 << 2) + +#define S3C2410_GPE2 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2) +#define S3C2410_GPE2_INP (0x00 << 4) +#define S3C2410_GPE2_OUTP (0x01 << 4) +#define S3C2410_GPE2_CDCLK (0x02 << 4) + +#define S3C2410_GPE3 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3) +#define S3C2410_GPE3_INP (0x00 << 6) +#define S3C2410_GPE3_OUTP (0x01 << 6) +#define S3C2410_GPE3_I2SSDI (0x02 << 6) +#define S3C2410_GPE3_nSS0 (0x03 << 6) +#define S3C2410_GPE3_MASK (0x03 << 6) + +#define S3C2410_GPE4 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4) +#define S3C2410_GPE4_INP (0x00 << 8) +#define S3C2410_GPE4_OUTP (0x01 << 8) +#define S3C2410_GPE4_I2SSDO (0x02 << 8) +#define S3C2410_GPE4_I2SSDI (0x03 << 8) +#define S3C2410_GPE4_MASK (0x03 << 8) + +#define S3C2410_GPE5 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5) +#define S3C2410_GPE5_INP (0x00 << 10) +#define S3C2410_GPE5_OUTP (0x01 << 10) +#define S3C2410_GPE5_SDCLK (0x02 << 10) + +#define S3C2410_GPE6 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6) +#define S3C2410_GPE6_INP (0x00 << 12) +#define S3C2410_GPE6_OUTP (0x01 << 12) +#define S3C2410_GPE6_SDCMD (0x02 << 12) + +#define S3C2410_GPE7 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7) +#define S3C2410_GPE7_INP (0x00 << 14) +#define S3C2410_GPE7_OUTP (0x01 << 14) +#define S3C2410_GPE7_SDDAT0 (0x02 << 14) + +#define S3C2410_GPE8 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8) +#define S3C2410_GPE8_INP (0x00 << 16) +#define S3C2410_GPE8_OUTP (0x01 << 16) +#define S3C2410_GPE8_SDDAT1 (0x02 << 16) + +#define S3C2410_GPE9 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9) +#define S3C2410_GPE9_INP (0x00 << 18) +#define S3C2410_GPE9_OUTP (0x01 << 18) +#define S3C2410_GPE9_SDDAT2 (0x02 << 18) + +#define S3C2410_GPE10 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10) +#define S3C2410_GPE10_INP (0x00 << 20) +#define S3C2410_GPE10_OUTP (0x01 << 20) +#define S3C2410_GPE10_SDDAT3 (0x02 << 20) + +#define S3C2410_GPE11 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11) +#define S3C2410_GPE11_INP (0x00 << 22) +#define S3C2410_GPE11_OUTP (0x01 << 22) +#define S3C2410_GPE11_SPIMISO0 (0x02 << 22) + +#define S3C2410_GPE12 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12) +#define S3C2410_GPE12_INP (0x00 << 24) +#define S3C2410_GPE12_OUTP (0x01 << 24) +#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24) + +#define S3C2410_GPE13 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13) +#define S3C2410_GPE13_INP (0x00 << 26) +#define S3C2410_GPE13_OUTP (0x01 << 26) +#define S3C2410_GPE13_SPICLK0 (0x02 << 26) + +#define S3C2410_GPE14 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14) +#define S3C2410_GPE14_INP (0x00 << 28) +#define S3C2410_GPE14_OUTP (0x01 << 28) +#define S3C2410_GPE14_IICSCL (0x02 << 28) +#define S3C2410_GPE14_MASK (0x03 << 28) + +#define S3C2410_GPE15 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15) +#define S3C2410_GPE15_INP (0x00 << 30) +#define S3C2410_GPE15_OUTP (0x01 << 30) +#define S3C2410_GPE15_IICSDA (0x02 << 30) +#define S3C2410_GPE15_MASK (0x03 << 30) + +#define S3C2440_GPE0_ACSYNC (0x03 << 0) +#define S3C2440_GPE1_ACBITCLK (0x03 << 2) +#define S3C2440_GPE2_ACRESET (0x03 << 4) +#define S3C2440_GPE3_ACIN (0x03 << 6) +#define S3C2440_GPE4_ACOUT (0x03 << 8) + +#define S3C2410_GPE_PUPDIS(x) (1<<(x)) + +/* Port F consists of 8 GPIO/Special function + * + * GPIO / interrupt inputs + * + * GPFCON has 2 bits for each of the input pins on port F + * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined + * + * pull up works like all other ports. +*/ + +#define S3C2410_GPFCON S3C2410_GPIOREG(0x50) +#define S3C2410_GPFDAT S3C2410_GPIOREG(0x54) +#define S3C2410_GPFUP S3C2410_GPIOREG(0x58) + +#define S3C2410_GPF0 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0) +#define S3C2410_GPF0_INP (0x00 << 0) +#define S3C2410_GPF0_OUTP (0x01 << 0) +#define S3C2410_GPF0_EINT0 (0x02 << 0) + +#define S3C2410_GPF1 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1) +#define S3C2410_GPF1_INP (0x00 << 2) +#define S3C2410_GPF1_OUTP (0x01 << 2) +#define S3C2410_GPF1_EINT1 (0x02 << 2) + +#define S3C2410_GPF2 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2) +#define S3C2410_GPF2_INP (0x00 << 4) +#define S3C2410_GPF2_OUTP (0x01 << 4) +#define S3C2410_GPF2_EINT2 (0x02 << 4) + +#define S3C2410_GPF3 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3) +#define S3C2410_GPF3_INP (0x00 << 6) +#define S3C2410_GPF3_OUTP (0x01 << 6) +#define S3C2410_GPF3_EINT3 (0x02 << 6) + +#define S3C2410_GPF4 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4) +#define S3C2410_GPF4_INP (0x00 << 8) +#define S3C2410_GPF4_OUTP (0x01 << 8) +#define S3C2410_GPF4_EINT4 (0x02 << 8) + +#define S3C2410_GPF5 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5) +#define S3C2410_GPF5_INP (0x00 << 10) +#define S3C2410_GPF5_OUTP (0x01 << 10) +#define S3C2410_GPF5_EINT5 (0x02 << 10) + +#define S3C2410_GPF6 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6) +#define S3C2410_GPF6_INP (0x00 << 12) +#define S3C2410_GPF6_OUTP (0x01 << 12) +#define S3C2410_GPF6_EINT6 (0x02 << 12) + +#define S3C2410_GPF7 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7) +#define S3C2410_GPF7_INP (0x00 << 14) +#define S3C2410_GPF7_OUTP (0x01 << 14) +#define S3C2410_GPF7_EINT7 (0x02 << 14) + +/* Port G consists of 8 GPIO/IRQ/Special function + * + * GPGCON has 2 bits for each of the input pins on port F + * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func + * + * pull up works like all other ports. +*/ + +#define S3C2410_GPGCON S3C2410_GPIOREG(0x60) +#define S3C2410_GPGDAT S3C2410_GPIOREG(0x64) +#define S3C2410_GPGUP S3C2410_GPIOREG(0x68) + +#define S3C2410_GPG0 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0) +#define S3C2410_GPG0_INP (0x00 << 0) +#define S3C2410_GPG0_OUTP (0x01 << 0) +#define S3C2410_GPG0_EINT8 (0x02 << 0) + +#define S3C2410_GPG1 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1) +#define S3C2410_GPG1_INP (0x00 << 2) +#define S3C2410_GPG1_OUTP (0x01 << 2) +#define S3C2410_GPG1_EINT9 (0x02 << 2) + +#define S3C2410_GPG2 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2) +#define S3C2410_GPG2_INP (0x00 << 4) +#define S3C2410_GPG2_OUTP (0x01 << 4) +#define S3C2410_GPG2_EINT10 (0x02 << 4) + +#define S3C2410_GPG3 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3) +#define S3C2410_GPG3_INP (0x00 << 6) +#define S3C2410_GPG3_OUTP (0x01 << 6) +#define S3C2410_GPG3_EINT11 (0x02 << 6) + +#define S3C2410_GPG4 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4) +#define S3C2410_GPG4_INP (0x00 << 8) +#define S3C2410_GPG4_OUTP (0x01 << 8) +#define S3C2410_GPG4_EINT12 (0x02 << 8) +#define S3C2410_GPG4_LCDPWREN (0x03 << 8) + +#define S3C2410_GPG5 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5) +#define S3C2410_GPG5_INP (0x00 << 10) +#define S3C2410_GPG5_OUTP (0x01 << 10) +#define S3C2410_GPG5_EINT13 (0x02 << 10) +#define S3C2410_GPG5_SPIMISO1 (0x03 << 10) + +#define S3C2410_GPG6 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6) +#define S3C2410_GPG6_INP (0x00 << 12) +#define S3C2410_GPG6_OUTP (0x01 << 12) +#define S3C2410_GPG6_EINT14 (0x02 << 12) +#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12) + +#define S3C2410_GPG7 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7) +#define S3C2410_GPG7_INP (0x00 << 14) +#define S3C2410_GPG7_OUTP (0x01 << 14) +#define S3C2410_GPG7_EINT15 (0x02 << 14) +#define S3C2410_GPG7_SPICLK1 (0x03 << 14) + +#define S3C2410_GPG8 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8) +#define S3C2410_GPG8_INP (0x00 << 16) +#define S3C2410_GPG8_OUTP (0x01 << 16) +#define S3C2410_GPG8_EINT16 (0x02 << 16) + +#define S3C2410_GPG9 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9) +#define S3C2410_GPG9_INP (0x00 << 18) +#define S3C2410_GPG9_OUTP (0x01 << 18) +#define S3C2410_GPG9_EINT17 (0x02 << 18) + +#define S3C2410_GPG10 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10) +#define S3C2410_GPG10_INP (0x00 << 20) +#define S3C2410_GPG10_OUTP (0x01 << 20) +#define S3C2410_GPG10_EINT18 (0x02 << 20) + +#define S3C2410_GPG11 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11) +#define S3C2410_GPG11_INP (0x00 << 22) +#define S3C2410_GPG11_OUTP (0x01 << 22) +#define S3C2410_GPG11_EINT19 (0x02 << 22) +#define S3C2410_GPG11_TCLK1 (0x03 << 22) + +#define S3C2410_GPG12 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12) +#define S3C2410_GPG12_INP (0x00 << 24) +#define S3C2410_GPG12_OUTP (0x01 << 24) +#define S3C2410_GPG12_EINT20 (0x02 << 24) +#define S3C2410_GPG12_XMON (0x03 << 24) + +#define S3C2410_GPG13 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13) +#define S3C2410_GPG13_INP (0x00 << 26) +#define S3C2410_GPG13_OUTP (0x01 << 26) +#define S3C2410_GPG13_EINT21 (0x02 << 26) +#define S3C2410_GPG13_nXPON (0x03 << 26) + +#define S3C2410_GPG14 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14) +#define S3C2410_GPG14_INP (0x00 << 28) +#define S3C2410_GPG14_OUTP (0x01 << 28) +#define S3C2410_GPG14_EINT22 (0x02 << 28) +#define S3C2410_GPG14_YMON (0x03 << 28) + +#define S3C2410_GPG15 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15) +#define S3C2410_GPG15_INP (0x00 << 30) +#define S3C2410_GPG15_OUTP (0x01 << 30) +#define S3C2410_GPG15_EINT23 (0x02 << 30) +#define S3C2410_GPG15_nYPON (0x03 << 30) + + +#define S3C2410_GPG_PUPDIS(x) (1<<(x)) + +/* Port H consists of11 GPIO/serial/Misc pins + * + * GPGCON has 2 bits for each of the input pins on port F + * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func + * + * pull up works like all other ports. +*/ + +#define S3C2410_GPHCON S3C2410_GPIOREG(0x70) +#define S3C2410_GPHDAT S3C2410_GPIOREG(0x74) +#define S3C2410_GPHUP S3C2410_GPIOREG(0x78) + +#define S3C2410_GPH0 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0) +#define S3C2410_GPH0_INP (0x00 << 0) +#define S3C2410_GPH0_OUTP (0x01 << 0) +#define S3C2410_GPH0_nCTS0 (0x02 << 0) + +#define S3C2410_GPH1 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1) +#define S3C2410_GPH1_INP (0x00 << 2) +#define S3C2410_GPH1_OUTP (0x01 << 2) +#define S3C2410_GPH1_nRTS0 (0x02 << 2) + +#define S3C2410_GPH2 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2) +#define S3C2410_GPH2_INP (0x00 << 4) +#define S3C2410_GPH2_OUTP (0x01 << 4) +#define S3C2410_GPH2_TXD0 (0x02 << 4) + +#define S3C2410_GPH3 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3) +#define S3C2410_GPH3_INP (0x00 << 6) +#define S3C2410_GPH3_OUTP (0x01 << 6) +#define S3C2410_GPH3_RXD0 (0x02 << 6) + +#define S3C2410_GPH4 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4) +#define S3C2410_GPH4_INP (0x00 << 8) +#define S3C2410_GPH4_OUTP (0x01 << 8) +#define S3C2410_GPH4_TXD1 (0x02 << 8) + +#define S3C2410_GPH5 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5) +#define S3C2410_GPH5_INP (0x00 << 10) +#define S3C2410_GPH5_OUTP (0x01 << 10) +#define S3C2410_GPH5_RXD1 (0x02 << 10) + +#define S3C2410_GPH6 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6) +#define S3C2410_GPH6_INP (0x00 << 12) +#define S3C2410_GPH6_OUTP (0x01 << 12) +#define S3C2410_GPH6_TXD2 (0x02 << 12) +#define S3C2410_GPH6_nRTS1 (0x03 << 12) + +#define S3C2410_GPH7 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7) +#define S3C2410_GPH7_INP (0x00 << 14) +#define S3C2410_GPH7_OUTP (0x01 << 14) +#define S3C2410_GPH7_RXD2 (0x02 << 14) +#define S3C2410_GPH7_nCTS1 (0x03 << 14) + +#define S3C2410_GPH8 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8) +#define S3C2410_GPH8_INP (0x00 << 16) +#define S3C2410_GPH8_OUTP (0x01 << 16) +#define S3C2410_GPH8_UCLK (0x02 << 16) + +#define S3C2410_GPH9 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9) +#define S3C2410_GPH9_INP (0x00 << 18) +#define S3C2410_GPH9_OUTP (0x01 << 18) +#define S3C2410_GPH9_CLKOUT0 (0x02 << 18) + +#define S3C2410_GPH10 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10) +#define S3C2410_GPH10_INP (0x00 << 20) +#define S3C2410_GPH10_OUTP (0x01 << 20) +#define S3C2410_GPH10_CLKOUT1 (0x02 << 20) + +/* miscellaneous control */ + +#define S3C2410_MISCCR S3C2410_GPIOREG(0x80) +#define S3C2410_DCLKCON S3C2410_GPIOREG(0x84) + +/* see clock.h for dclk definitions */ + +/* pullup control on databus */ +#define S3C2410_MISCCR_SPUCR_HEN (0) +#define S3C2410_MISCCR_SPUCR_HDIS (1<<0) +#define S3C2410_MISCCR_SPUCR_LEN (0) +#define S3C2410_MISCCR_SPUCR_LDIS (1<<1) + +#define S3C2410_MISCCR_USBDEV (0) +#define S3C2410_MISCCR_USBHOST (1<<3) + +#define S3C2410_MISCCR_CLK0_MPLL (0<<4) +#define S3C2410_MISCCR_CLK0_UPLL (1<<4) +#define S3C2410_MISCCR_CLK0_FCLK (2<<4) +#define S3C2410_MISCCR_CLK0_HCLK (3<<4) +#define S3C2410_MISCCR_CLK0_PCLK (4<<4) +#define S3C2410_MISCCR_CLK0_DCLK0 (5<<4) + +#define S3C2410_MISCCR_CLK1_MPLL (0<<8) +#define S3C2410_MISCCR_CLK1_UPLL (1<<8) +#define S3C2410_MISCCR_CLK1_FCLK (2<<8) +#define S3C2410_MISCCR_CLK1_HCLK (3<<8) +#define S3C2410_MISCCR_CLK1_PCLK (4<<8) +#define S3C2410_MISCCR_CLK1_DCLK1 (5<<8) + +#define S3C2410_MISCCR_USBSUSPND0 (1<<12) +#define S3C2410_MISCCR_USBSUSPND1 (1<<13) + +#define S3C2410_MISCCR_nRSTCON (1<<16) + +#define S3C2410_MISCCR_nEN_SCLK0 (1<<17) +#define S3C2410_MISCCR_nEN_SCLK1 (1<<18) +#define S3C2410_MISCCR_nEN_SCLKE (1<<19) +#define S3C2410_MISCCR_SDSLEEP (7<<17) + +/* external interrupt control... */ +/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7 + * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15 + * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23 + * + * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23 + * + * Samsung datasheet p9-25 +*/ + +#define S3C2410_EXTINT0 S3C2410_GPIOREG(0x88) +#define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C) +#define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90) + +/* values for S3C2410_EXTINT0/1/2 */ +#define S3C2410_EXTINT_LOWLEV (0x00) +#define S3C2410_EXTINT_HILEV (0x01) +#define S3C2410_EXTINT_FALLEDGE (0x02) +#define S3C2410_EXTINT_RISEEDGE (0x04) +#define S3C2410_EXTINT_BOTHEDGE (0x06) + +/* interrupt filtering conrrol for EINT16..EINT23 */ +#define S3C2410_EINFLT0 S3C2410_GPIOREG(0x94) +#define S3C2410_EINFLT1 S3C2410_GPIOREG(0x98) +#define S3C2410_EINFLT2 S3C2410_GPIOREG(0x9C) +#define S3C2410_EINFLT3 S3C2410_GPIOREG(0xA0) + +/* values for interrupt filtering */ +#define S3C2410_EINTFLT_PCLK (0x00) +#define S3C2410_EINTFLT_EXTCLK (1<<7) +#define S3C2410_EINTFLT_WIDTHMSK(x) ((x) & 0x3f) + +/* removed EINTxxxx defs from here, not meant for this */ + +/* GSTATUS have miscellaneous information in them + * + */ + +#define S3C2410_GSTATUS0 S3C2410_GPIOREG(0x0AC) +#define S3C2410_GSTATUS1 S3C2410_GPIOREG(0x0B0) +#define S3C2410_GSTATUS2 S3C2410_GPIOREG(0x0B4) +#define S3C2410_GSTATUS3 S3C2410_GPIOREG(0x0B8) +#define S3C2410_GSTATUS4 S3C2410_GPIOREG(0x0BC) + +#define S3C2410_GSTATUS0_nWAIT (1<<3) +#define S3C2410_GSTATUS0_NCON (1<<2) +#define S3C2410_GSTATUS0_RnB (1<<1) +#define S3C2410_GSTATUS0_nBATTFLT (1<<0) + +#define S3C2410_GSTATUS1_IDMASK (0xffff0000) +#define S3C2410_GSTATUS1_2410 (0x32410000) +#define S3C2410_GSTATUS1_2440 (0x32440000) + +#define S3C2410_GSTATUS2_WTRESET (1<<2) +#define S3C2410_GSTATUS2_OFFRESET (1<<1) +#define S3C2410_GSTATUS2_PONRESET (1<<0) + +#endif /* __ASM_ARCH_REGS_GPIO_H */ + diff --git a/include/asm-arm/arch-s3c2410/regs-gpioj.h b/include/asm-arm/arch-s3c2410/regs-gpioj.h new file mode 100644 index 00000000000..3ad2324acc3 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-gpioj.h @@ -0,0 +1,101 @@ +/* linux/include/asm/hardware/s3c2410/regs-gpioj.h + * + * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2440 GPIO J register definitions + * + * Changelog: + * 11-Aug-2004 BJD Created file + * 10-Feb-2005 BJD Fix GPJ12 definition (Guillaume Gourat) +*/ + + +#ifndef __ASM_ARCH_REGS_GPIOJ_H +#define __ASM_ARCH_REGS_GPIOJ_H "gpioj" + +/* Port J consists of 13 GPIO/Camera pins + * + * GPJCON has 2 bits for each of the input pins on port F + * 00 = 0 input, 1 output, 2 Camera + * + * pull up works like all other ports. +*/ + +#define S3C2440_GPIO_BANKJ (416) + +#define S3C2440_GPJCON S3C2410_GPIOREG(0xd0) +#define S3C2440_GPJDAT S3C2410_GPIOREG(0xd4) +#define S3C2440_GPJUP S3C2410_GPIOREG(0xd8) + +#define S3C2440_GPJ0 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 0) +#define S3C2440_GPJ0_INP (0x00 << 0) +#define S3C2440_GPJ0_OUTP (0x01 << 0) +#define S3C2440_GPJ0_CAMDATA0 (0x02 << 0) + +#define S3C2440_GPJ1 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 1) +#define S3C2440_GPJ1_INP (0x00 << 2) +#define S3C2440_GPJ1_OUTP (0x01 << 2) +#define S3C2440_GPJ1_CAMDATA1 (0x02 << 2) + +#define S3C2440_GPJ2 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 2) +#define S3C2440_GPJ2_INP (0x00 << 4) +#define S3C2440_GPJ2_OUTP (0x01 << 4) +#define S3C2440_GPJ2_CAMDATA2 (0x02 << 4) + +#define S3C2440_GPJ3 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 3) +#define S3C2440_GPJ3_INP (0x00 << 6) +#define S3C2440_GPJ3_OUTP (0x01 << 6) +#define S3C2440_GPJ3_CAMDATA3 (0x02 << 6) + +#define S3C2440_GPJ4 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 4) +#define S3C2440_GPJ4_INP (0x00 << 8) +#define S3C2440_GPJ4_OUTP (0x01 << 8) +#define S3C2440_GPJ4_CAMDATA4 (0x02 << 8) + +#define S3C2440_GPJ5 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 5) +#define S3C2440_GPJ5_INP (0x00 << 10) +#define S3C2440_GPJ5_OUTP (0x01 << 10) +#define S3C2440_GPJ5_CAMDATA5 (0x02 << 10) + +#define S3C2440_GPJ6 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 6) +#define S3C2440_GPJ6_INP (0x00 << 12) +#define S3C2440_GPJ6_OUTP (0x01 << 12) +#define S3C2440_GPJ6_CAMDATA6 (0x02 << 12) + +#define S3C2440_GPJ7 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 7) +#define S3C2440_GPJ7_INP (0x00 << 14) +#define S3C2440_GPJ7_OUTP (0x01 << 14) +#define S3C2440_GPJ7_CAMDATA7 (0x02 << 14) + +#define S3C2440_GPJ8 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 8) +#define S3C2440_GPJ8_INP (0x00 << 16) +#define S3C2440_GPJ8_OUTP (0x01 << 16) +#define S3C2440_GPJ8_CAMPCLK (0x02 << 16) + +#define S3C2440_GPJ9 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 9) +#define S3C2440_GPJ9_INP (0x00 << 18) +#define S3C2440_GPJ9_OUTP (0x01 << 18) +#define S3C2440_GPJ9_CAMVSYNC (0x02 << 18) + +#define S3C2440_GPJ10 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 10) +#define S3C2440_GPJ10_INP (0x00 << 20) +#define S3C2440_GPJ10_OUTP (0x01 << 20) +#define S3C2440_GPJ10_CAMHREF (0x02 << 20) + +#define S3C2440_GPJ11 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 11) +#define S3C2440_GPJ11_INP (0x00 << 22) +#define S3C2440_GPJ11_OUTP (0x01 << 22) +#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22) + +#define S3C2440_GPJ12 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 12) +#define S3C2440_GPJ12_INP (0x00 << 24) +#define S3C2440_GPJ12_OUTP (0x01 << 24) +#define S3C2440_GPJ12_CAMRESET (0x02 << 24) + +#endif /* __ASM_ARCH_REGS_GPIOJ_H */ + diff --git a/include/asm-arm/arch-s3c2410/regs-iic.h b/include/asm-arm/arch-s3c2410/regs-iic.h new file mode 100644 index 00000000000..fed3288e204 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-iic.h @@ -0,0 +1,60 @@ +/* linux/include/asm-arm/arch-s3c2410/regs-iic.h + * + * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 I2C Controller + * + * Changelog: + * 03-Oct-2004 BJD Initial include for Linux + * 08-Nov-2004 BJD Added S3C2440 filter register +*/ + +#ifndef __ASM_ARCH_REGS_IIC_H +#define __ASM_ARCH_REGS_IIC_H __FILE__ + +/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */ + +#define S3C2410_IICREG(x) (x) + +#define S3C2410_IICCON S3C2410_IICREG(0x00) +#define S3C2410_IICSTAT S3C2410_IICREG(0x04) +#define S3C2410_IICADD S3C2410_IICREG(0x08) +#define S3C2410_IICDS S3C2410_IICREG(0x0C) +#define S3C2440_IICLC S3C2410_IICREG(0x10) + +#define S3C2410_IICCON_ACKEN (1<<7) +#define S3C2410_IICCON_TXDIV_16 (0<<6) +#define S3C2410_IICCON_TXDIV_512 (1<<6) +#define S3C2410_IICCON_IRQEN (1<<5) +#define S3C2410_IICCON_IRQPEND (1<<4) +#define S3C2410_IICCON_SCALE(x) ((x)&15) +#define S3C2410_IICCON_SCALEMASK (0xf) + +#define S3C2410_IICSTAT_MASTER_RX (2<<6) +#define S3C2410_IICSTAT_MASTER_TX (3<<6) +#define S3C2410_IICSTAT_SLAVE_RX (0<<6) +#define S3C2410_IICSTAT_SLAVE_TX (1<<6) +#define S3C2410_IICSTAT_MODEMASK (3<<6) + +#define S3C2410_IICSTAT_START (1<<5) +#define S3C2410_IICSTAT_BUSBUSY (1<<5) +#define S3C2410_IICSTAT_TXRXEN (1<<4) +#define S3C2410_IICSTAT_ARBITR (1<<3) +#define S3C2410_IICSTAT_ASSLAVE (1<<2) +#define S3C2410_IICSTAT_ADDR0 (1<<1) +#define S3C2410_IICSTAT_LASTBIT (1<<0) + +#define S3C2410_IICLC_SDA_DELAY0 (0 << 0) +#define S3C2410_IICLC_SDA_DELAY5 (1 << 0) +#define S3C2410_IICLC_SDA_DELAY10 (2 << 0) +#define S3C2410_IICLC_SDA_DELAY15 (3 << 0) +#define S3C2410_IICLC_SDA_DELAY_MASK (3 << 0) + +#define S3C2410_IICLC_FILTER_ON (1<<2) + +#endif /* __ASM_ARCH_REGS_IIC_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-iis.h b/include/asm-arm/arch-s3c2410/regs-iis.h new file mode 100644 index 00000000000..7ae8e1f45bc --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-iis.h @@ -0,0 +1,72 @@ +/* linux/include/asm/arch-s3c2410/regs-iis.h + * + * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 IIS register definition + * + * Changelog: + * 19-06-2003 BJD Created file + * 26-06-2003 BJD Finished off definitions for register addresses + * 12-03-2004 BJD Updated include protection + * 07-03-2005 BJD Added FIFO size flags and S3C2440 MPLL + */ + +#ifndef __ASM_ARCH_REGS_IIS_H +#define __ASM_ARCH_REGS_IIS_H + +#define S3C2410_IISCON (0x00) + +#define S3C2440_IISCON_MPLL (1<<9) +#define S3C2410_IISCON_LRINDEX (1<<8) +#define S3C2410_IISCON_TXFIFORDY (1<<7) +#define S3C2410_IISCON_RXFIFORDY (1<<6) +#define S3C2410_IISCON_TXDMAEN (1<<5) +#define S3C2410_IISCON_RXDMAEN (1<<4) +#define S3C2410_IISCON_TXIDLE (1<<3) +#define S3C2410_IISCON_RXIDLE (1<<2) +#define S3C2410_IISCON_IISEN (1<<0) + +#define S3C2410_IISMOD (0x04) + +#define S3C2410_IISMOD_SLAVE (1<<8) +#define S3C2410_IISMOD_NOXFER (0<<6) +#define S3C2410_IISMOD_RXMODE (1<<6) +#define S3C2410_IISMOD_TXMODE (2<<6) +#define S3C2410_IISMOD_TXRXMODE (3<<6) +#define S3C2410_IISMOD_LR_LLOW (0<<5) +#define S3C2410_IISMOD_LR_RLOW (1<<5) +#define S3C2410_IISMOD_IIS (0<<4) +#define S3C2410_IISMOD_MSB (1<<4) +#define S3C2410_IISMOD_8BIT (0<<3) +#define S3C2410_IISMOD_16BIT (1<<3) +#define S3C2410_IISMOD_BITMASK (1<<3) +#define S3C2410_IISMOD_256FS (0<<1) +#define S3C2410_IISMOD_384FS (1<<1) +#define S3C2410_IISMOD_16FS (0<<0) +#define S3C2410_IISMOD_32FS (1<<0) +#define S3C2410_IISMOD_48FS (2<<0) + +#define S3C2410_IISPSR (0x08) +#define S3C2410_IISPSR_INTMASK (31<<5) +#define S3C2410_IISPSR_INTSHIFT (5) +#define S3C2410_IISPSR_EXTMASK (31<<0) +#define S3C2410_IISPSR_EXTSHFIT (0) + +#define S3C2410_IISFCON (0x0c) + +#define S3C2410_IISFCON_TXDMA (1<<15) +#define S3C2410_IISFCON_RXDMA (1<<14) +#define S3C2410_IISFCON_TXENABLE (1<<13) +#define S3C2410_IISFCON_RXENABLE (1<<12) +#define S3C2410_IISFCON_TXMASK (0x3f << 6) +#define S3C2410_IISFCON_TXSHIFT (6) +#define S3C2410_IISFCON_RXMASK (0x3f) +#define S3C2410_IISFCON_RXSHIFT (0) + +#define S3C2410_IISFIFO (0x10) +#endif /* __ASM_ARCH_REGS_IIS_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-irq.h b/include/asm-arm/arch-s3c2410/regs-irq.h new file mode 100644 index 00000000000..24b7292df79 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-irq.h @@ -0,0 +1,44 @@ +/* linux/include/asm/arch-s3c2410/regs-irq.h + * + * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * + * + * Changelog: + * 19-06-2003 BJD Created file + * 12-03-2004 BJD Updated include protection + * 10-03-2005 LCVR Changed S3C2410_VA to S3C24XX_VA + */ + + +#ifndef ___ASM_ARCH_REGS_IRQ_H +#define ___ASM_ARCH_REGS_IRQ_H "$Id: irq.h,v 1.3 2003/03/25 21:29:06 ben Exp $" + +/* interrupt controller */ + +#define S3C2410_IRQREG(x) ((x) + S3C24XX_VA_IRQ) +#define S3C2410_EINTREG(x) ((x) + S3C24XX_VA_GPIO) + +#define S3C2410_SRCPND S3C2410_IRQREG(0x000) +#define S3C2410_INTMOD S3C2410_IRQREG(0x004) +#define S3C2410_INTMSK S3C2410_IRQREG(0x008) +#define S3C2410_PRIORITY S3C2410_IRQREG(0x00C) +#define S3C2410_INTPND S3C2410_IRQREG(0x010) +#define S3C2410_INTOFFSET S3C2410_IRQREG(0x014) +#define S3C2410_SUBSRCPND S3C2410_IRQREG(0x018) +#define S3C2410_INTSUBMSK S3C2410_IRQREG(0x01C) + +/* mask: 0=enable, 1=disable + * 1 bit EINT, 4=EINT4, 23=EINT23 + * EINT0,1,2,3 are not handled here. +*/ + +#define S3C2410_EINTMASK S3C2410_EINTREG(0x0A4) +#define S3C2410_EINTPEND S3C2410_EINTREG(0X0A8) + +#endif /* ___ASM_ARCH_REGS_IRQ_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-lcd.h b/include/asm-arm/arch-s3c2410/regs-lcd.h new file mode 100644 index 00000000000..7f882ea92b2 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-lcd.h @@ -0,0 +1,114 @@ +/* linux/include/asm/arch-s3c2410/regs-lcd.h + * + * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * + * + * Changelog: + * 12-06-2003 BJD Created file + * 26-06-2003 BJD Updated LCDCON register definitions + * 12-03-2004 BJD Updated include protection + * 10-03-2005 LCVR Changed S3C2410_VA to S3C24XX_VA +*/ + + +#ifndef ___ASM_ARCH_REGS_LCD_H +#define ___ASM_ARCH_REGS_LCD_H "$Id: lcd.h,v 1.3 2003/06/26 13:25:06 ben Exp $" + +#define S3C2410_LCDREG(x) ((x) + S3C24XX_VA_LCD) + +/* LCD control registers */ +#define S3C2410_LCDCON1 S3C2410_LCDREG(0x00) +#define S3C2410_LCDCON2 S3C2410_LCDREG(0x04) +#define S3C2410_LCDCON3 S3C2410_LCDREG(0x08) +#define S3C2410_LCDCON4 S3C2410_LCDREG(0x0C) +#define S3C2410_LCDCON5 S3C2410_LCDREG(0x10) + +#define S3C2410_LCDCON1_CLKVAL(x) ((x) << 8) +#define S3C2410_LCDCON1_MMODE (1<<7) +#define S3C2410_LCDCON1_DSCAN4 (0<<5) +#define S3C2410_LCDCON1_STN4 (1<<5) +#define S3C2410_LCDCON1_STN8 (2<<5) +#define S3C2410_LCDCON1_TFT (3<<5) + +#define S3C2410_LCDCON1_STN1BPP (0<<1) +#define S3C2410_LCDCON1_STN2GREY (1<<1) +#define S3C2410_LCDCON1_STN4GREY (2<<1) +#define S3C2410_LCDCON1_STN8BPP (3<<1) +#define S3C2410_LCDCON1_STN12BPP (4<<1) + +#define S3C2410_LCDCON1_TFT1BPP (8<<1) +#define S3C2410_LCDCON1_TFT2BPP (9<<1) +#define S3C2410_LCDCON1_TFT4BPP (10<<1) +#define S3C2410_LCDCON1_TFT8BPP (11<<1) +#define S3C2410_LCDCON1_TFT16BPP (12<<1) +#define S3C2410_LCDCON1_TFT24BPP (13<<1) + +#define S3C2410_LCDCON1_ENVID (1) + +#define S3C2410_LCDCON2_VBPD(x) ((x) << 24) +#define S3C2410_LCDCON2_LINEVAL(x) ((x) << 14) +#define S3C2410_LCDCON2_VFPD(x) ((x) << 6) +#define S3C2410_LCDCON2_VSPW(x) ((x) << 0) + +#define S3C2410_LCDCON3_HBPD(x) ((x) << 19) +#define S3C2410_LCDCON3_WDLY(x) ((x) << 19) +#define S3C2410_LCDCON3_HOZVAL(x) ((x) << 8) +#define S3C2410_LCDCON3_HFPD(x) ((x) << 0) +#define S3C2410_LCDCON3_LINEBLANK(x)((x) << 0) + +#define S3C2410_LCDCON4_MVAL(x) ((x) << 8) +#define S3C2410_LCDCON4_HSPW(x) ((x) << 0) +#define S3C2410_LCDCON4_WLH(x) ((x) << 0) + +#define S3C2410_LCDCON5_BPP24BL (1<<12) +#define S3C2410_LCDCON5_FRM565 (1<<11) +#define S3C2410_LCDCON5_INVVCLK (1<<10) +#define S3C2410_LCDCON5_INVVLINE (1<<9) +#define S3C2410_LCDCON5_INVVFRAME (1<<8) +#define S3C2410_LCDCON5_INVVD (1<<7) +#define S3C2410_LCDCON5_INVVDEN (1<<6) +#define S3C2410_LCDCON5_INVPWREN (1<<5) +#define S3C2410_LCDCON5_INVLEND (1<<4) +#define S3C2410_LCDCON5_PWREN (1<<3) +#define S3C2410_LCDCON5_ENLEND (1<<2) +#define S3C2410_LCDCON5_BSWP (1<<1) +#define S3C2410_LCDCON5_HWSWP (1<<0) + +/* framebuffer start addressed */ +#define S3C2410_LCDSADDR1 S3C2410_LCDREG(0x14) +#define S3C2410_LCDSADDR2 S3C2410_LCDREG(0x18) +#define S3C2410_LCDSADDR3 S3C2410_LCDREG(0x1C) + +#define S3C2410_LCDBANK(x) ((x) << 21) +#define S3C2410_LCDBASEU(x) (x) + +#define S3C2410_OFFSIZE(x) ((x) << 11) +#define S3C2410_PAGEWIDTH(x) (x) + +/* colour lookup and miscellaneous controls */ + +#define S3C2410_REDLUT S3C2410_LCDREG(0x20) +#define S3C2410_GREENLUT S3C2410_LCDREG(0x24) +#define S3C2410_BLUELUT S3C2410_LCDREG(0x28) + +#define S3C2410_DITHMODE S3C2410_LCDREG(0x4C) +#define S3C2410_TPAL S3C2410_LCDREG(0x50) + +/* interrupt info */ +#define S3C2410_LCDINTPND S3C2410_LCDREG(0x54) +#define S3C2410_LCDSRCPND S3C2410_LCDREG(0x58) +#define S3C2410_LCDINTMSK S3C2410_LCDREG(0x5C) +#define S3C2410_LPCSEL S3C2410_LCDREG(0x60) + +#define S3C2410_TFTPAL(x) S3C2410_LCDREG((0x400 + (x)*4)) + +#endif /* ___ASM_ARCH_REGS_LCD_H */ + + + diff --git a/include/asm-arm/arch-s3c2410/regs-mem.h b/include/asm-arm/arch-s3c2410/regs-mem.h new file mode 100644 index 00000000000..1a1328ac0d7 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-mem.h @@ -0,0 +1,212 @@ +/* linux/include/asm-arm/arch-s3c2410/regs-mem.h + * + * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 Memory Control register definitions + * + * Changelog: + * 29-Sep-2004 BJD Initial include for Linux + * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA + * +*/ + +#ifndef __ASM_ARM_MEMREGS_H +#define __ASM_ARM_MEMREGS_H "$Id: regs.h,v 1.8 2003/05/01 15:55:41 ben Exp $" + +#ifndef S3C2410_MEMREG +#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) +#endif + +/* bus width, and wait state control */ +#define S3C2410_BWSCON S3C2410_MEMREG(0x0000) + +/* bank zero config - note, pinstrapped from OM pins! */ +#define S3C2410_BWSCON_DW0_16 (1<<1) +#define S3C2410_BWSCON_DW0_32 (2<<1) + +/* bank one configs */ +#define S3C2410_BWSCON_DW1_8 (0<<4) +#define S3C2410_BWSCON_DW1_16 (1<<4) +#define S3C2410_BWSCON_DW1_32 (2<<4) +#define S3C2410_BWSCON_WS1 (1<<6) +#define S3C2410_BWSCON_ST1 (1<<7) + +/* bank 2 configurations */ +#define S3C2410_BWSCON_DW2_8 (0<<8) +#define S3C2410_BWSCON_DW2_16 (1<<8) +#define S3C2410_BWSCON_DW2_32 (2<<8) +#define S3C2410_BWSCON_WS2 (1<<10) +#define S3C2410_BWSCON_ST2 (1<<11) + +/* bank 3 configurations */ +#define S3C2410_BWSCON_DW3_8 (0<<12) +#define S3C2410_BWSCON_DW3_16 (1<<12) +#define S3C2410_BWSCON_DW3_32 (2<<12) +#define S3C2410_BWSCON_WS3 (1<<14) +#define S3C2410_BWSCON_ST3 (1<<15) + +/* bank 4 configurations */ +#define S3C2410_BWSCON_DW4_8 (0<<16) +#define S3C2410_BWSCON_DW4_16 (1<<16) +#define S3C2410_BWSCON_DW4_32 (2<<16) +#define S3C2410_BWSCON_WS4 (1<<18) +#define S3C2410_BWSCON_ST4 (1<<19) + +/* bank 5 configurations */ +#define S3C2410_BWSCON_DW5_8 (0<<20) +#define S3C2410_BWSCON_DW5_16 (1<<20) +#define S3C2410_BWSCON_DW5_32 (2<<20) +#define S3C2410_BWSCON_WS5 (1<<22) +#define S3C2410_BWSCON_ST5 (1<<23) + +/* bank 6 configurations */ +#define S3C2410_BWSCON_DW6_8 (0<<24) +#define S3C2410_BWSCON_DW6_16 (1<<24) +#define S3C2410_BWSCON_DW6_32 (2<<24) +#define S3C2410_BWSCON_WS6 (1<<26) +#define S3C2410_BWSCON_ST6 (1<<27) + +/* bank 7 configurations */ +#define S3C2410_BWSCON_DW7_8 (0<<28) +#define S3C2410_BWSCON_DW7_16 (1<<28) +#define S3C2410_BWSCON_DW7_32 (2<<28) +#define S3C2410_BWSCON_WS7 (1<<30) +#define S3C2410_BWSCON_ST7 (1<<31) + +/* memory set (rom, ram) */ +#define S3C2410_BANKCON0 S3C2410_MEMREG(0x0004) +#define S3C2410_BANKCON1 S3C2410_MEMREG(0x0008) +#define S3C2410_BANKCON2 S3C2410_MEMREG(0x000C) +#define S3C2410_BANKCON3 S3C2410_MEMREG(0x0010) +#define S3C2410_BANKCON4 S3C2410_MEMREG(0x0014) +#define S3C2410_BANKCON5 S3C2410_MEMREG(0x0018) +#define S3C2410_BANKCON6 S3C2410_MEMREG(0x001C) +#define S3C2410_BANKCON7 S3C2410_MEMREG(0x0020) + +/* bank configuration registers */ + +#define S3C2410_BANKCON_PMCnorm (0x00) +#define S3C2410_BANKCON_PMC4 (0x01) +#define S3C2410_BANKCON_PMC8 (0x02) +#define S3C2410_BANKCON_PMC16 (0x03) + +/* bank configurations for banks 0..7, note banks + * 6 and 7 have differnt configurations depending on + * the memory type bits */ + +#define S3C2410_BANKCON_Tacp2 (0x0 << 2) +#define S3C2410_BANKCON_Tacp3 (0x1 << 2) +#define S3C2410_BANKCON_Tacp4 (0x2 << 2) +#define S3C2410_BANKCON_Tacp6 (0x3 << 2) + +#define S3C2410_BANKCON_Tcah0 (0x0 << 4) +#define S3C2410_BANKCON_Tcah1 (0x1 << 4) +#define S3C2410_BANKCON_Tcah2 (0x2 << 4) +#define S3C2410_BANKCON_Tcah4 (0x3 << 4) + +#define S3C2410_BANKCON_Tcoh0 (0x0 << 6) +#define S3C2410_BANKCON_Tcoh1 (0x1 << 6) +#define S3C2410_BANKCON_Tcoh2 (0x2 << 6) +#define S3C2410_BANKCON_Tcoh4 (0x3 << 6) + +#define S3C2410_BANKCON_Tacc1 (0x0 << 8) +#define S3C2410_BANKCON_Tacc2 (0x1 << 8) +#define S3C2410_BANKCON_Tacc3 (0x2 << 8) +#define S3C2410_BANKCON_Tacc4 (0x3 << 8) +#define S3C2410_BANKCON_Tacc6 (0x4 << 8) +#define S3C2410_BANKCON_Tacc8 (0x5 << 8) +#define S3C2410_BANKCON_Tacc10 (0x6 << 8) +#define S3C2410_BANKCON_Tacc14 (0x7 << 8) + +#define S3C2410_BANKCON_Tcos0 (0x0 << 11) +#define S3C2410_BANKCON_Tcos1 (0x1 << 11) +#define S3C2410_BANKCON_Tcos2 (0x2 << 11) +#define S3C2410_BANKCON_Tcos4 (0x3 << 11) + +#define S3C2410_BANKCON_Tacs0 (0x0 << 13) +#define S3C2410_BANKCON_Tacs1 (0x1 << 13) +#define S3C2410_BANKCON_Tacs2 (0x2 << 13) +#define S3C2410_BANKCON_Tacs4 (0x3 << 13) + +#define S3C2410_BANKCON_SRAM (0x0 << 15) +#define S3C2400_BANKCON_EDODRAM (0x2 << 15) +#define S3C2410_BANKCON_SDRAM (0x3 << 15) + +/* next bits only for EDO DRAM in 6,7 */ +#define S3C2400_BANKCON_EDO_Trdc1 (0x00 << 4) +#define S3C2400_BANKCON_EDO_Trdc2 (0x01 << 4) +#define S3C2400_BANKCON_EDO_Trdc3 (0x02 << 4) +#define S3C2400_BANKCON_EDO_Trdc4 (0x03 << 4) + +/* CAS pulse width */ +#define S3C2400_BANKCON_EDO_PULSE1 (0x00 << 3) +#define S3C2400_BANKCON_EDO_PULSE2 (0x01 << 3) + +/* CAS pre-charge */ +#define S3C2400_BANKCON_EDO_TCP1 (0x00 << 2) +#define S3C2400_BANKCON_EDO_TCP2 (0x01 << 2) + +/* control column address select */ +#define S3C2400_BANKCON_EDO_SCANb8 (0x00 << 0) +#define S3C2400_BANKCON_EDO_SCANb9 (0x01 << 0) +#define S3C2400_BANKCON_EDO_SCANb10 (0x02 << 0) +#define S3C2400_BANKCON_EDO_SCANb11 (0x03 << 0) + +/* next bits only for SDRAM in 6,7 */ +#define S3C2410_BANKCON_Trdc2 (0x00 << 2) +#define S3C2410_BANKCON_Trdc3 (0x01 << 2) +#define S3C2410_BANKCON_Trdc4 (0x02 << 2) + +/* control column address select */ +#define S3C2410_BANKCON_SCANb8 (0x00 << 0) +#define S3C2410_BANKCON_SCANb9 (0x01 << 0) +#define S3C2410_BANKCON_SCANb10 (0x02 << 0) + +#define S3C2410_REFRESH S3C2410_MEMREG(0x0024) +#define S3C2410_BANKSIZE S3C2410_MEMREG(0x0028) +#define S3C2410_MRSRB6 S3C2410_MEMREG(0x002C) +#define S3C2410_MRSRB7 S3C2410_MEMREG(0x0030) + +/* refresh control */ + +#define S3C2410_REFRESH_REFEN (1<<23) +#define S3C2410_REFRESH_SELF (1<<22) +#define S3C2410_REFRESH_REFCOUNTER ((1<<11)-1) + +#define S3C2410_REFRESH_TRP_MASK (3<<20) +#define S3C2410_REFRESH_TRP_2clk (0<<20) +#define S3C2410_REFRESH_TRP_3clk (1<<20) +#define S3C2410_REFRESH_TRP_4clk (2<<20) + +#define S3C2410_REFRESH_TSRC_MASK (3<<18) +#define S3C2410_REFRESH_TSRC_4clk (0<<18) +#define S3C2410_REFRESH_TSRC_5clk (1<<18) +#define S3C2410_REFRESH_TSRC_6clk (2<<18) +#define S3C2410_REFRESH_TSRC_7clk (3<<18) + + +/* mode select register(s) */ + +#define S3C2410_MRSRB_CL1 (0x00 << 4) +#define S3C2410_MRSRB_CL2 (0x02 << 4) +#define S3C2410_MRSRB_CL3 (0x03 << 4) + +/* bank size register */ +#define S3C2410_BANKSIZE_128M (0x2 << 0) +#define S3C2410_BANKSIZE_64M (0x1 << 0) +#define S3C2410_BANKSIZE_32M (0x0 << 0) +#define S3C2410_BANKSIZE_16M (0x7 << 0) +#define S3C2410_BANKSIZE_8M (0x6 << 0) +#define S3C2410_BANKSIZE_4M (0x5 << 0) +#define S3C2410_BANKSIZE_2M (0x4 << 0) +#define S3C2410_BANKSIZE_MASK (0x7 << 0) +#define S3C2410_BANKSIZE_SCLK_EN (1<<4) +#define S3C2410_BANKSIZE_SCKE_EN (1<<5) +#define S3C2410_BANKSIZE_BURST (1<<7) + +#endif /* __ASM_ARM_MEMREGS_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-nand.h b/include/asm-arm/arch-s3c2410/regs-nand.h new file mode 100644 index 00000000000..c443ac83469 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-nand.h @@ -0,0 +1,43 @@ +/* linux/include/asm-arm/arch-s3c2410/regs-nand.h + * + * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 clock register definitions + * + * Changelog: + * 18-Aug-2004 BJD Copied file from 2.4 and updated +*/ + +#ifndef __ASM_ARM_REGS_NAND +#define __ASM_ARM_REGS_NAND "$Id: nand.h,v 1.3 2003/12/09 11:36:29 ben Exp $" + + +#define S3C2410_NFREG(x) (x) + +#define S3C2410_NFCONF S3C2410_NFREG(0x00) +#define S3C2410_NFCMD S3C2410_NFREG(0x04) +#define S3C2410_NFADDR S3C2410_NFREG(0x08) +#define S3C2410_NFDATA S3C2410_NFREG(0x0C) +#define S3C2410_NFSTAT S3C2410_NFREG(0x10) +#define S3C2410_NFECC S3C2410_NFREG(0x14) + +#define S3C2410_NFCONF_EN (1<<15) +#define S3C2410_NFCONF_512BYTE (1<<14) +#define S3C2410_NFCONF_4STEP (1<<13) +#define S3C2410_NFCONF_INITECC (1<<12) +#define S3C2410_NFCONF_nFCE (1<<11) +#define S3C2410_NFCONF_TACLS(x) ((x)<<8) +#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4) +#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0) + +#define S3C2410_NFSTAT_BUSY (1<<0) + +/* think ECC can only be 8bit read? */ + +#endif /* __ASM_ARM_REGS_NAND */ + diff --git a/include/asm-arm/arch-s3c2410/regs-rtc.h b/include/asm-arm/arch-s3c2410/regs-rtc.h new file mode 100644 index 00000000000..228983f89bc --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-rtc.h @@ -0,0 +1,66 @@ +/* linux/include/asm/arch-s3c2410/regs-rtc.h + * + * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 Internal RTC register definition + * + * Changelog: + * 19-06-2003 BJD Created file + * 12-03-2004 BJD Updated include protection + * 15-01-2005 LCVR Changed S3C2410_VA to S3C24XX_VA (s3c2400 support) +*/ + +#ifndef __ASM_ARCH_REGS_RTC_H +#define __ASM_ARCH_REGS_RTC_H __FILE__ + +#define S3C2410_RTCREG(x) ((x) + S3C24XX_VA_RTC) + +#define S3C2410_RTCCON S3C2410_RTCREG(0x40) +#define S3C2410_RTCCON_RTCEN (1<<0) +#define S3C2410_RTCCON_CLKSEL (1<<1) +#define S3C2410_RTCCON_CNTSEL (1<<2) +#define S3C2410_RTCCON_CLKRST (1<<3) + +#define S3C2410_TICNT S3C2410_RTCREG(0x44) +#define S3C2410_TICNT_ENABLE (1<<7) + +#define S3C2410_RTCALM S3C2410_RTCREG(0x50) +#define S3C2410_RTCALM_ALMEN (1<<6) +#define S3C2410_RTCALM_YEAREN (1<<5) +#define S3C2410_RTCALM_MONEN (1<<4) +#define S3C2410_RTCALM_DAYEN (1<<3) +#define S3C2410_RTCALM_HOUREN (1<<2) +#define S3C2410_RTCALM_MINEN (1<<1) +#define S3C2410_RTCALM_SECEN (1<<0) + +#define S3C2410_RTCALM_ALL \ + S3C2410_RTCALM_ALMEN | S3C2410_RTCALM_YEAREN | S3C2410_RTCALM_MONEN |\ + S3C2410_RTCALM_DAYEN | S3C2410_RTCALM_HOUREN | S3C2410_RTCALM_MINEN |\ + S3C2410_RTCALM_SECEN + + +#define S3C2410_ALMSEC S3C2410_RTCREG(0x54) +#define S3C2410_ALMMIN S3C2410_RTCREG(0x58) +#define S3C2410_ALMHOUR S3C2410_RTCREG(0x5c) + +#define S3C2410_ALMDATE S3C2410_RTCREG(0x60) +#define S3C2410_ALMMON S3C2410_RTCREG(0x64) +#define S3C2410_ALMYEAR S3C2410_RTCREG(0x68) + +#define S3C2410_RTCRST S3C2410_RTCREG(0x6c) + +#define S3C2410_RTCSEC S3C2410_RTCREG(0x70) +#define S3C2410_RTCMIN S3C2410_RTCREG(0x74) +#define S3C2410_RTCHOUR S3C2410_RTCREG(0x78) +#define S3C2410_RTCDATE S3C2410_RTCREG(0x7c) +#define S3C2410_RTCDAY S3C2410_RTCREG(0x80) +#define S3C2410_RTCMON S3C2410_RTCREG(0x84) +#define S3C2410_RTCYEAR S3C2410_RTCREG(0x88) + + +#endif /* __ASM_ARCH_REGS_RTC_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-sdi.h b/include/asm-arm/arch-s3c2410/regs-sdi.h new file mode 100644 index 00000000000..ca9a26fbece --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-sdi.h @@ -0,0 +1,118 @@ +/* linux/include/asm/arch-s3c2410/regs-sdi.h + * + * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 MMC/SDIO register definitions + * + * Changelog: + * 18-Aug-2004 Ben Dooks Created initial file + * 29-Nov-2004 Koen Martens Added some missing defines, fixed duplicates + * 29-Nov-2004 Ben Dooks Updated Koen's patch +*/ + +#ifndef __ASM_ARM_REGS_SDI +#define __ASM_ARM_REGS_SDI "regs-sdi.h" + +#define S3C2410_SDICON (0x00) +#define S3C2410_SDIPRE (0x04) +#define S3C2410_SDICMDARG (0x08) +#define S3C2410_SDICMDCON (0x0C) +#define S3C2410_SDICMDSTAT (0x10) +#define S3C2410_SDIRSP0 (0x14) +#define S3C2410_SDIRSP1 (0x18) +#define S3C2410_SDIRSP2 (0x1C) +#define S3C2410_SDIRSP3 (0x20) +#define S3C2410_SDITIMER (0x24) +#define S3C2410_SDIBSIZE (0x28) +#define S3C2410_SDIDCON (0x2C) +#define S3C2410_SDIDCNT (0x30) +#define S3C2410_SDIDSTA (0x34) +#define S3C2410_SDIFSTA (0x38) +#define S3C2410_SDIDATA (0x3C) +#define S3C2410_SDIIMSK (0x40) + +#define S3C2410_SDICON_BYTEORDER (1<<4) +#define S3C2410_SDICON_SDIOIRQ (1<<3) +#define S3C2410_SDICON_RWAITEN (1<<2) +#define S3C2410_SDICON_FIFORESET (1<<1) +#define S3C2410_SDICON_CLOCKTYPE (1<<0) + +#define S3C2410_SDICMDCON_ABORT (1<<12) +#define S3C2410_SDICMDCON_WITHDATA (1<<11) +#define S3C2410_SDICMDCON_LONGRSP (1<<10) +#define S3C2410_SDICMDCON_WAITRSP (1<<9) +#define S3C2410_SDICMDCON_CMDSTART (1<<8) +#define S3C2410_SDICMDCON_INDEX (0xff) + +#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12) +#define S3C2410_SDICMDSTAT_CMDSENT (1<<11) +#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10) +#define S3C2410_SDICMDSTAT_RSPFIN (1<<9) +#define S3C2410_SDICMDSTAT_XFERING (1<<8) +#define S3C2410_SDICMDSTAT_INDEX (0xff) + +#define S3C2410_SDIDCON_IRQPERIOD (1<<21) +#define S3C2410_SDIDCON_TXAFTERRESP (1<<20) +#define S3C2410_SDIDCON_RXAFTERCMD (1<<19) +#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18) +#define S3C2410_SDIDCON_BLOCKMODE (1<<17) +#define S3C2410_SDIDCON_WIDEBUS (1<<16) +#define S3C2410_SDIDCON_DMAEN (1<<15) +#define S3C2410_SDIDCON_STOP (1<<14) +#define S3C2410_SDIDCON_DATMODE (3<<12) +#define S3C2410_SDIDCON_BLKNUM (0x7ff) + +/* constants for S3C2410_SDIDCON_DATMODE */ +#define S3C2410_SDIDCON_XFER_READY (0<<12) +#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12) +#define S3C2410_SDIDCON_XFER_RXSTART (2<<12) +#define S3C2410_SDIDCON_XFER_TXSTART (3<<12) + +#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12) + +#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10) +#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9) +#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */ +#define S3C2410_SDIDSTA_CRCFAIL (1<<7) +#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6) +#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5) +#define S3C2410_SDIDSTA_XFERFINISH (1<<4) +#define S3C2410_SDIDSTA_BUSYFINISH (1<<3) +#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */ +#define S3C2410_SDIDSTA_TXDATAON (1<<1) +#define S3C2410_SDIDSTA_RXDATAON (1<<0) + +#define S3C2410_SDIFSTA_TFDET (1<<13) +#define S3C2410_SDIFSTA_RFDET (1<<12) +#define S3C2410_SDIFSTA_TXHALF (1<<11) +#define S3C2410_SDIFSTA_TXEMPTY (1<<10) +#define S3C2410_SDIFSTA_RFLAST (1<<9) +#define S3C2410_SDIFSTA_RFFULL (1<<8) +#define S3C2410_SDIFSTA_RFHALF (1<<7) +#define S3C2410_SDIFSTA_COUNTMASK (0x7f) + +#define S3C2410_SDIIMSK_RESPONSECRC (1<<17) +#define S3C2410_SDIIMSK_CMDSENT (1<<16) +#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15) +#define S3C2410_SDIIMSK_RESPONSEND (1<<14) +#define S3C2410_SDIIMSK_READWAIT (1<<13) +#define S3C2410_SDIIMSK_SDIOIRQ (1<<12) +#define S3C2410_SDIIMSK_FIFOFAIL (1<<11) +#define S3C2410_SDIIMSK_CRCSTATUS (1<<10) +#define S3C2410_SDIIMSK_DATACRC (1<<9) +#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8) +#define S3C2410_SDIIMSK_DATAFINISH (1<<7) +#define S3C2410_SDIIMSK_BUSYFINISH (1<<6) +#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */ +#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4) +#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3) +#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2) +#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1) +#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0) + +#endif /* __ASM_ARM_REGS_SDI */ diff --git a/include/asm-arm/arch-s3c2410/regs-serial.h b/include/asm-arm/arch-s3c2410/regs-serial.h new file mode 100644 index 00000000000..ce1bbbaad6d --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-serial.h @@ -0,0 +1,209 @@ +/* linux/include/asm-arm/arch-s3c2410/regs-serial.h + * + * From linux/include/asm-arm/hardware/serial_s3c2410.h + * + * Internal header file for Samsung S3C2410 serial ports (UART0-2) + * + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * + * Additional defines, (c) 2003 Simtec Electronics (linux@simtec.co.uk) + * + * Adapted from: + * + * Internal header file for MX1ADS serial ports (UART1 & 2) + * + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Modifications: + * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA (s3c2400 support) + */ + +#ifndef __ASM_ARM_REGS_SERIAL_H +#define __ASM_ARM_REGS_SERIAL_H + +#define S3C24XX_VA_UART0 (S3C24XX_VA_UART) +#define S3C24XX_VA_UART1 (S3C24XX_VA_UART + 0x4000 ) +#define S3C24XX_VA_UART2 (S3C24XX_VA_UART + 0x8000 ) + +#define S3C2410_PA_UART0 (S3C2410_PA_UART) +#define S3C2410_PA_UART1 (S3C2410_PA_UART + 0x4000 ) +#define S3C2410_PA_UART2 (S3C2410_PA_UART + 0x8000 ) + +#define S3C2410_URXH (0x24) +#define S3C2410_UTXH (0x20) +#define S3C2410_ULCON (0x00) +#define S3C2410_UCON (0x04) +#define S3C2410_UFCON (0x08) +#define S3C2410_UMCON (0x0C) +#define S3C2410_UBRDIV (0x28) +#define S3C2410_UTRSTAT (0x10) +#define S3C2410_UERSTAT (0x14) +#define S3C2410_UFSTAT (0x18) +#define S3C2410_UMSTAT (0x1C) + +#define S3C2410_LCON_CFGMASK ((0xF<<3)|(0x3)) + +#define S3C2410_LCON_CS5 (0x0) +#define S3C2410_LCON_CS6 (0x1) +#define S3C2410_LCON_CS7 (0x2) +#define S3C2410_LCON_CS8 (0x3) +#define S3C2410_LCON_CSMASK (0x3) + +#define S3C2410_LCON_PNONE (0x0) +#define S3C2410_LCON_PEVEN (0x5 << 3) +#define S3C2410_LCON_PODD (0x4 << 3) +#define S3C2410_LCON_PMASK (0x7 << 3) + +#define S3C2410_LCON_STOPB (1<<2) +#define S3C2410_LCON_IRM (1<<6) + +#define S3C2440_UCON_CLKMASK (3<<10) +#define S3C2440_UCON_PCLK (0<<10) +#define S3C2440_UCON_UCLK (1<<10) +#define S3C2440_UCON_PCLK2 (2<<10) +#define S3C2440_UCON_FCLK (3<<10) +#define S3C2440_UCON2_FCLK_EN (1<<15) +#define S3C2440_UCON0_DIVMASK (15 << 12) +#define S3C2440_UCON1_DIVMASK (15 << 12) +#define S3C2440_UCON2_DIVMASK (7 << 12) +#define S3C2440_UCON_DIVSHIFT (12) + +#define S3C2410_UCON_UCLK (1<<10) +#define S3C2410_UCON_SBREAK (1<<4) + +#define S3C2410_UCON_TXILEVEL (1<<9) +#define S3C2410_UCON_RXILEVEL (1<<8) +#define S3C2410_UCON_TXIRQMODE (1<<2) +#define S3C2410_UCON_RXIRQMODE (1<<0) +#define S3C2410_UCON_RXFIFO_TOI (1<<7) + +#define S3C2410_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI) + +#define S3C2410_UFCON_FIFOMODE (1<<0) +#define S3C2410_UFCON_TXTRIG0 (0<<6) +#define S3C2410_UFCON_RXTRIG8 (1<<4) +#define S3C2410_UFCON_RXTRIG12 (2<<4) + +/* S3C2440 FIFO trigger levels */ +#define S3C2440_UFCON_RXTRIG1 (0<<4) +#define S3C2440_UFCON_RXTRIG8 (1<<4) +#define S3C2440_UFCON_RXTRIG16 (2<<4) +#define S3C2440_UFCON_RXTRIG32 (3<<4) + +#define S3C2440_UFCON_TXTRIG0 (0<<6) +#define S3C2440_UFCON_TXTRIG16 (1<<6) +#define S3C2440_UFCON_TXTRIG32 (2<<6) +#define S3C2440_UFCON_TXTRIG48 (3<<6) + +#define S3C2410_UFCON_RESETBOTH (3<<1) +#define S3C2410_UFCON_RESETTX (1<<2) +#define S3C2410_UFCON_RESETRX (1<<1) + +#define S3C2410_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S3C2410_UFCON_TXTRIG0 | \ + S3C2410_UFCON_RXTRIG8 ) + +#define S3C2410_UMCOM_AFC (1<<4) +#define S3C2410_UMCOM_RTS_LOW (1<<0) + +#define S3C2410_UFSTAT_TXFULL (1<<9) +#define S3C2410_UFSTAT_RXFULL (1<<8) +#define S3C2410_UFSTAT_TXMASK (15<<4) +#define S3C2410_UFSTAT_TXSHIFT (4) +#define S3C2410_UFSTAT_RXMASK (15<<0) +#define S3C2410_UFSTAT_RXSHIFT (0) + +#define S3C2440_UFSTAT_TXFULL (1<<14) +#define S3C2440_UFSTAT_RXFULL (1<<6) +#define S3C2440_UFSTAT_TXSHIFT (8) +#define S3C2440_UFSTAT_RXSHIFT (0) +#define S3C2440_UFSTAT_TXMASK (63<<8) +#define S3C2440_UFSTAT_RXMASK (63) + +#define S3C2410_UTRSTAT_TXE (1<<2) +#define S3C2410_UTRSTAT_TXFE (1<<1) +#define S3C2410_UTRSTAT_RXDR (1<<0) + +#define S3C2410_UERSTAT_OVERRUN (1<<0) +#define S3C2410_UERSTAT_FRAME (1<<2) +#define S3C2410_UERSTAT_BREAK (1<<3) +#define S3C2410_UERSTAT_ANY (S3C2410_UERSTAT_OVERRUN | \ + S3C2410_UERSTAT_FRAME | \ + S3C2410_UERSTAT_BREAK) + +#define S3C2410_UMSTAT_CTS (1<<0) +#define S3C2410_UMSTAT_DeltaCTS (1<<2) + +#ifndef __ASSEMBLY__ + +/* struct s3c24xx_uart_clksrc + * + * this structure defines a named clock source that can be used for the + * uart, so that the best clock can be selected for the requested baud + * rate. + * + * min_baud and max_baud define the range of baud-rates this clock is + * acceptable for, if they are both zero, it is assumed any baud rate that + * can be generated from this clock will be used. + * + * divisor gives the divisor from the clock to the one seen by the uart +*/ + +struct s3c24xx_uart_clksrc { + const char *name; + unsigned int divisor; + unsigned int min_baud; + unsigned int max_baud; +}; + +/* configuration structure for per-machine configurations for the + * serial port + * + * the pointer is setup by the machine specific initialisation from the + * arch/arm/mach-s3c2410/ directory. +*/ + +struct s3c2410_uartcfg { + unsigned char hwport; /* hardware port number */ + unsigned char unused; + unsigned short flags; + unsigned long uart_flags; /* default uart flags */ + + unsigned long ucon; /* value of ucon for port */ + unsigned long ulcon; /* value of ulcon for port */ + unsigned long ufcon; /* value of ufcon for port */ + + struct s3c24xx_uart_clksrc *clocks; + unsigned int clocks_size; +}; + +/* s3c24xx_uart_devs + * + * this is exported from the core as we cannot use driver_register(), + * or platform_add_device() before the console_initcall() +*/ + +extern struct platform_device *s3c24xx_uart_devs[3]; + +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_ARM_REGS_SERIAL_H */ + diff --git a/include/asm-arm/arch-s3c2410/regs-spi.h b/include/asm-arm/arch-s3c2410/regs-spi.h new file mode 100644 index 00000000000..cb502a88158 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-spi.h @@ -0,0 +1,56 @@ +/* linux/include/asm-arm/arch-s3c2410/regs-spi.h + * + * Copyright (c) 2004 Fetron GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 SPI register definition + * + * Changelog: + * 20-04-2004 KF Created file + * 04-10-2004 BJD Removed VA address (no longer mapped) + * tidied file for submission + */ + +#ifndef __ASM_ARCH_REGS_SPI_H +#define __ASM_ARCH_REGS_SPI_H + + +#define S3C2410_SPCON (0x00) + +#define S3C2410_SPCON_SMOD_DMA (2<<5) /* DMA mode */ +#define S3C2410_SPCON_SMOD_INT (1<<5) /* interrupt mode */ +#define S3C2410_SPCON_SMOD_POLL (0<<5) /* polling mode */ +#define S3C2410_SPCON_ENSCK (1<<4) /* Enable SCK */ +#define S3C2410_SPCON_MSTR (1<<3) /* Master/Slave select + 0: slave, 1: master */ +#define S3C2410_SPCON_CPOL_HIGH (1<<2) /* Clock polarity select */ +#define S3C2410_SPCON_CPOL_LOW (0<<2) /* Clock polarity select */ + +#define S3C2410_SPCON_CPHA_FMTB (1<<1) /* Clock Phase Select */ +#define S3C2410_SPCON_CPHA_FMTA (0<<1) /* Clock Phase Select */ + +#define S3C2410_SPCON_TAGD (1<<0) /* Tx auto garbage data mode */ + + +#define S3C2410_SPSTA (0x04) + +#define S3C2410_SPSTA_DCOL (1<<2) /* Data Collision Error */ +#define S3C2410_SPSTA_MULD (1<<1) /* Multi Master Error */ +#define S3C2410_SPSTA_READY (1<<0) /* Data Tx/Rx ready */ + + +#define S3C2410_SPPIN (0x08) + +#define S3C2410_SPPIN_ENMUL (1<<2) /* Multi Master Error detect */ +#define S3C2410_SPPIN_RESERVED (1<<1) +#define S3C2410_SPPIN_KEEP (1<<0) /* Master Out keep */ + + +#define S3C2410_SPPRE (0x0C) +#define S3C2410_SPTDAT (0x10) +#define S3C2410_SPRDAT (0x14) + +#endif /* __ASM_ARCH_REGS_SPI_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-timer.h b/include/asm-arm/arch-s3c2410/regs-timer.h new file mode 100644 index 00000000000..169064e2752 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-timer.h @@ -0,0 +1,113 @@ +/* linux/include/asm/arch-s3c2410/regs-timer.h + * + * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 Timer configuration + * + * Changelog: + * 05-06-2003 BJD Created file + * 26-06-2003 BJD Added more timer definitions to mux / control + * 12-03-2004 BJD Updated include protection + * 10-02-2005 BJD Added S3C2410_TCFG1_MUX4_SHIFT (Guillaume Gourat) + * 10-03-2005 LCVR Changed S3C2410_VA to S3C24XX_VA +*/ + + +#ifndef __ASM_ARCH_REGS_TIMER_H +#define __ASM_ARCH_REGS_TIMER_H "$Id: timer.h,v 1.4 2003/05/06 19:30:50 ben Exp $" + +#define S3C2410_TIMERREG(x) (S3C24XX_VA_TIMER + (x)) +#define S3C2410_TIMERREG2(tmr,reg) S3C2410_TIMERREG((reg)+0x0c+((tmr)*0x0c)) + +#define S3C2410_TCFG0 S3C2410_TIMERREG(0x00) +#define S3C2410_TCFG1 S3C2410_TIMERREG(0x04) +#define S3C2410_TCON S3C2410_TIMERREG(0x08) + +#define S3C2410_TCFG_PRESCALER0_MASK (255<<0) +#define S3C2410_TCFG_PRESCALER1_MASK (255<<8) +#define S3C2410_TCFG_PRESCALER1_SHIFT (8) +#define S3C2410_TCFG_DEADZONE_MASK (255<<16) +#define S3C2410_TCFG_DEADZONE_SHIFT (16) + +#define S3C2410_TCFG1_MUX4_DIV2 (0<<16) +#define S3C2410_TCFG1_MUX4_DIV4 (1<<16) +#define S3C2410_TCFG1_MUX4_DIV8 (2<<16) +#define S3C2410_TCFG1_MUX4_DIV16 (3<<16) +#define S3C2410_TCFG1_MUX4_TCLK1 (4<<16) +#define S3C2410_TCFG1_MUX4_MASK (15<<16) +#define S3C2410_TCFG1_MUX4_SHIFT (16) + +#define S3C2410_TCFG1_MUX3_DIV2 (0<<12) +#define S3C2410_TCFG1_MUX3_DIV4 (1<<12) +#define S3C2410_TCFG1_MUX3_DIV8 (2<<12) +#define S3C2410_TCFG1_MUX3_DIV16 (3<<12) +#define S3C2410_TCFG1_MUX3_TCLK1 (4<<12) +#define S3C2410_TCFG1_MUX3_MASK (15<<12) + + +#define S3C2410_TCFG1_MUX2_DIV2 (0<<8) +#define S3C2410_TCFG1_MUX2_DIV4 (1<<8) +#define S3C2410_TCFG1_MUX2_DIV8 (2<<8) +#define S3C2410_TCFG1_MUX2_DIV16 (3<<8) +#define S3C2410_TCFG1_MUX2_TCLK1 (4<<8) +#define S3C2410_TCFG1_MUX2_MASK (15<<8) + + +#define S3C2410_TCFG1_MUX1_DIV2 (0<<4) +#define S3C2410_TCFG1_MUX1_DIV4 (1<<4) +#define S3C2410_TCFG1_MUX1_DIV8 (2<<4) +#define S3C2410_TCFG1_MUX1_DIV16 (3<<4) +#define S3C2410_TCFG1_MUX1_TCLK0 (4<<4) +#define S3C2410_TCFG1_MUX1_MASK (15<<4) + +#define S3C2410_TCFG1_MUX0_DIV2 (0<<0) +#define S3C2410_TCFG1_MUX0_DIV4 (1<<0) +#define S3C2410_TCFG1_MUX0_DIV8 (2<<0) +#define S3C2410_TCFG1_MUX0_DIV16 (3<<0) +#define S3C2410_TCFG1_MUX0_TCLK0 (4<<0) +#define S3C2410_TCFG1_MUX0_MASK (15<<0) + +/* for each timer, we have an count buffer, an compare buffer and + * an observation buffer +*/ + +/* WARNING - timer 4 has no buffer reg, and it's observation is at +4 */ + +#define S3C2410_TCNTB(tmr) S3C2410_TIMERREG2(tmr, 0x00) +#define S3C2410_TCMPB(tmr) S3C2410_TIMERREG2(tmr, 0x04) +#define S3C2410_TCNTO(tmr) S3C2410_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08)) + +#define S3C2410_TCON_T4RELOAD (1<<22) +#define S3C2410_TCON_T4MANUALUPD (1<<21) +#define S3C2410_TCON_T4START (1<<20) + +#define S3C2410_TCON_T3RELOAD (1<<19) +#define S3C2410_TCON_T3INVERT (1<<18) +#define S3C2410_TCON_T3MANUALUPD (1<<17) +#define S3C2410_TCON_T3START (1<<16) + +#define S3C2410_TCON_T2RELOAD (1<<15) +#define S3C2410_TCON_T2INVERT (1<<14) +#define S3C2410_TCON_T2MANUALUPD (1<<13) +#define S3C2410_TCON_T2START (1<<12) + +#define S3C2410_TCON_T1RELOAD (1<<11) +#define S3C2410_TCON_T1INVERT (1<<10) +#define S3C2410_TCON_T1MANUALUPD (1<<9) +#define S3C2410_TCON_T1START (1<<8) + +#define S3C2410_TCON_T0DEADZONE (1<<4) +#define S3C2410_TCON_T0RELOAD (1<<3) +#define S3C2410_TCON_T0INVERT (1<<2) +#define S3C2410_TCON_T0MANUALUPD (1<<1) +#define S3C2410_TCON_T0START (1<<0) + +#endif /* __ASM_ARCH_REGS_TIMER_H */ + + + diff --git a/include/asm-arm/arch-s3c2410/regs-udc.h b/include/asm-arm/arch-s3c2410/regs-udc.h new file mode 100644 index 00000000000..bf315b76325 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-udc.h @@ -0,0 +1,164 @@ +/* linux/include/asm/arch-s3c2410/regs-udc.h + * + * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at> + * + * This include file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Changelog: + * 01-08-2004 Initial creation + * 12-09-2004 Cleanup for submission + * 24-10-2004 Fixed S3C2410_UDC_MAXP_REG definition + * 10-03-2005 Changed S3C2410_VA to S3C24XX_VA + */ + +#ifndef __ASM_ARCH_REGS_UDC_H +#define __ASM_ARCH_REGS_UDC_H + + +#define S3C2410_USBDREG(x) ((x) + S3C24XX_VA_USBDEV) + +#define S3C2410_UDC_FUNC_ADDR_REG S3C2410_USBDREG(0x0140) +#define S3C2410_UDC_PWR_REG S3C2410_USBDREG(0x0144) +#define S3C2410_UDC_EP_INT_REG S3C2410_USBDREG(0x0148) + +#define S3C2410_UDC_USB_INT_REG S3C2410_USBDREG(0x0158) +#define S3C2410_UDC_EP_INT_EN_REG S3C2410_USBDREG(0x015c) + +#define S3C2410_UDC_USB_INT_EN_REG S3C2410_USBDREG(0x016c) + +#define S3C2410_UDC_FRAME_NUM1_REG S3C2410_USBDREG(0x0170) +#define S3C2410_UDC_FRAME_NUM2_REG S3C2410_USBDREG(0x0174) + +#define S3C2410_UDC_EP0_FIFO_REG S3C2410_USBDREG(0x01c0) +#define S3C2410_UDC_EP1_FIFO_REG S3C2410_USBDREG(0x01c4) +#define S3C2410_UDC_EP2_FIFO_REG S3C2410_USBDREG(0x01c8) +#define S3C2410_UDC_EP3_FIFO_REG S3C2410_USBDREG(0x01cc) +#define S3C2410_UDC_EP4_FIFO_REG S3C2410_USBDREG(0x01d0) + +#define S3C2410_UDC_EP1_DMA_CON S3C2410_USBDREG(0x0200) +#define S3C2410_UDC_EP1_DMA_UNIT S3C2410_USBDREG(0x0204) +#define S3C2410_UDC_EP1_DMA_FIFO S3C2410_USBDREG(0x0208) +#define S3C2410_UDC_EP1_DMA_TTC_L S3C2410_USBDREG(0x020c) +#define S3C2410_UDC_EP1_DMA_TTC_M S3C2410_USBDREG(0x0210) +#define S3C2410_UDC_EP1_DMA_TTC_H S3C2410_USBDREG(0x0214) + +#define S3C2410_UDC_EP2_DMA_CON S3C2410_USBDREG(0x0218) +#define S3C2410_UDC_EP2_DMA_UNIT S3C2410_USBDREG(0x021c) +#define S3C2410_UDC_EP2_DMA_FIFO S3C2410_USBDREG(0x0220) +#define S3C2410_UDC_EP2_DMA_TTC_L S3C2410_USBDREG(0x0224) +#define S3C2410_UDC_EP2_DMA_TTC_M S3C2410_USBDREG(0x0228) +#define S3C2410_UDC_EP2_DMA_TTC_H S3C2410_USBDREG(0x022c) + +#define S3C2410_UDC_EP3_DMA_CON S3C2410_USBDREG(0x0240) +#define S3C2410_UDC_EP3_DMA_UNIT S3C2410_USBDREG(0x0244) +#define S3C2410_UDC_EP3_DMA_FIFO S3C2410_USBDREG(0x0248) +#define S3C2410_UDC_EP3_DMA_TTC_L S3C2410_USBDREG(0x024c) +#define S3C2410_UDC_EP3_DMA_TTC_M S3C2410_USBDREG(0x0250) +#define S3C2410_UDC_EP3_DMA_TTC_H S3C2410_USBDREG(0x0254) + +#define S3C2410_UDC_EP4_DMA_CON S3C2410_USBDREG(0x0258) +#define S3C2410_UDC_EP4_DMA_UNIT S3C2410_USBDREG(0x025c) +#define S3C2410_UDC_EP4_DMA_FIFO S3C2410_USBDREG(0x0260) +#define S3C2410_UDC_EP4_DMA_TTC_L S3C2410_USBDREG(0x0264) +#define S3C2410_UDC_EP4_DMA_TTC_M S3C2410_USBDREG(0x0268) +#define S3C2410_UDC_EP4_DMA_TTC_H S3C2410_USBDREG(0x026c) + +#define S3C2410_UDC_INDEX_REG S3C2410_USBDREG(0x0178) + +/* indexed registers */ + +#define S3C2410_UDC_MAXP_REG S3C2410_USBDREG(0x0180) + +#define S3C2410_UDC_EP0_CSR_REG S3C2410_USBDREG(0x0184) + +#define S3C2410_UDC_IN_CSR1_REG S3C2410_USBDREG(0x0184) +#define S3C2410_UDC_IN_CSR2_REG S3C2410_USBDREG(0x0188) + +#define S3C2410_UDC_OUT_CSR1_REG S3C2410_USBDREG(0x0190) +#define S3C2410_UDC_OUT_CSR2_REG S3C2410_USBDREG(0x0194) +#define S3C2410_UDC_OUT_FIFO_CNT1_REG S3C2410_USBDREG(0x0198) +#define S3C2410_UDC_OUT_FIFO_CNT2_REG S3C2410_USBDREG(0x019c) + + + +#define S3C2410_UDC_PWR_ISOUP (1<<7) // R/W +#define S3C2410_UDC_PWR_RESET (1<<3) // R +#define S3C2410_UDC_PWR_RESUME (1<<2) // R/W +#define S3C2410_UDC_PWR_SUSPEND (1<<1) // R +#define S3C2410_UDC_PWR_ENSUSPEND (1<<0) // R/W + +#define S3C2410_UDC_PWR_DEFAULT 0x00 + +#define S3C2410_UDC_INT_EP4 (1<<4) // R/W (clear only) +#define S3C2410_UDC_INT_EP3 (1<<3) // R/W (clear only) +#define S3C2410_UDC_INT_EP2 (1<<2) // R/W (clear only) +#define S3C2410_UDC_INT_EP1 (1<<1) // R/W (clear only) +#define S3C2410_UDC_INT_EP0 (1<<0) // R/W (clear only) + +#define S3C2410_UDC_USBINT_RESET (1<<2) // R/W (clear only) +#define S3C2410_UDC_USBINT_RESUME (1<<1) // R/W (clear only) +#define S3C2410_UDC_USBINT_SUSPEND (1<<0) // R/W (clear only) + +#define S3C2410_UDC_INTE_EP4 (1<<4) // R/W +#define S3C2410_UDC_INTE_EP3 (1<<3) // R/W +#define S3C2410_UDC_INTE_EP2 (1<<2) // R/W +#define S3C2410_UDC_INTE_EP1 (1<<1) // R/W +#define S3C2410_UDC_INTE_EP0 (1<<0) // R/W + +#define S3C2410_UDC_USBINTE_RESET (1<<2) // R/W +#define S3C2410_UDC_USBINTE_SUSPEND (1<<0) // R/W + + +#define S3C2410_UDC_INDEX_EP0 (0x00) +#define S3C2410_UDC_INDEX_EP1 (0x01) // ?? +#define S3C2410_UDC_INDEX_EP2 (0x02) // ?? +#define S3C2410_UDC_INDEX_EP3 (0x03) // ?? +#define S3C2410_UDC_INDEX_EP4 (0x04) // ?? + +#define S3C2410_UDC_ICSR1_CLRDT (1<<6) // R/W +#define S3C2410_UDC_ICSR1_SENTSTL (1<<5) // R/W (clear only) +#define S3C2410_UDC_ICSR1_SENDSTL (1<<4) // R/W +#define S3C2410_UDC_ICSR1_FFLUSH (1<<3) // W (set only) +#define S3C2410_UDC_ICSR1_UNDRUN (1<<2) // R/W (clear only) +#define S3C2410_UDC_ICSR1_PKTRDY (1<<0) // R/W (set only) + +#define S3C2410_UDC_ICSR2_AUTOSET (1<<7) // R/W +#define S3C2410_UDC_ICSR2_ISO (1<<6) // R/W +#define S3C2410_UDC_ICSR2_MODEIN (1<<5) // R/W +#define S3C2410_UDC_ICSR2_DMAIEN (1<<4) // R/W + +#define S3C2410_UDC_OCSR1_CLRDT (1<<7) // R/W +#define S3C2410_UDC_OCSR1_SENTSTL (1<<6) // R/W (clear only) +#define S3C2410_UDC_OCSR1_SENDSTL (1<<5) // R/W +#define S3C2410_UDC_OCSR1_FFLUSH (1<<4) // R/W +#define S3C2410_UDC_OCSR1_DERROR (1<<3) // R +#define S3C2410_UDC_OCSR1_OVRRUN (1<<2) // R/W (clear only) +#define S3C2410_UDC_OCSR1_PKTRDY (1<<0) // R/W (clear only) + +#define S3C2410_UDC_OCSR2_AUTOCLR (1<<7) // R/W +#define S3C2410_UDC_OCSR2_ISO (1<<6) // R/W +#define S3C2410_UDC_OCSR2_DMAIEN (1<<5) // R/W + +#define S3C2410_UDC_SETIX(x) \ + __raw_writel(S3C2410_UDC_INDEX_ ## x, S3C2410_UDC_INDEX_REG); + + +#define S3C2410_UDC_EP0_CSR_OPKRDY (1<<0) +#define S3C2410_UDC_EP0_CSR_IPKRDY (1<<1) +#define S3C2410_UDC_EP0_CSR_SENTSTL (1<<2) +#define S3C2410_UDC_EP0_CSR_DE (1<<3) +#define S3C2410_UDC_EP0_CSR_SE (1<<4) +#define S3C2410_UDC_EP0_CSR_SENDSTL (1<<5) +#define S3C2410_UDC_EP0_CSR_SOPKTRDY (1<<6) +#define S3C2410_UDC_EP0_CSR_SSE (1<<7) + +#define S3C2410_UDC_MAXP_8 (1<<0) +#define S3C2410_UDC_MAXP_16 (1<<1) +#define S3C2410_UDC_MAXP_32 (1<<2) +#define S3C2410_UDC_MAXP_64 (1<<3) + + +#endif diff --git a/include/asm-arm/arch-s3c2410/regs-watchdog.h b/include/asm-arm/arch-s3c2410/regs-watchdog.h new file mode 100644 index 00000000000..d199ca6aff2 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-watchdog.h @@ -0,0 +1,46 @@ +/* linux/include/asm/arch-s3c2410/regs0watchdog.h + * + * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 Watchdog timer control + * + * Changelog: + * 21-06-2003 BJD Created file + * 12-03-2004 BJD Updated include protection + * 10-03-2005 LCVR Changed S3C2410_VA to S3C24XX_VA +*/ + + +#ifndef __ASM_ARCH_REGS_WATCHDOG_H +#define __ASM_ARCH_REGS_WATCHDOG_H "$Id: watchdog.h,v 1.2 2003/04/29 13:31:09 ben Exp $" + +#define S3C2410_WDOGREG(x) ((x) + S3C24XX_VA_WATCHDOG) + +#define S3C2410_WTCON S3C2410_WDOGREG(0x00) +#define S3C2410_WTDAT S3C2410_WDOGREG(0x04) +#define S3C2410_WTCNT S3C2410_WDOGREG(0x08) + +/* the watchdog can either generate a reset pulse, or an + * interrupt. + */ + +#define S3C2410_WTCON_RSTEN (0x01) +#define S3C2410_WTCON_INTEN (1<<2) +#define S3C2410_WTCON_ENABLE (1<<5) + +#define S3C2410_WTCON_DIV16 (0<<3) +#define S3C2410_WTCON_DIV32 (1<<3) +#define S3C2410_WTCON_DIV64 (2<<3) +#define S3C2410_WTCON_DIV128 (3<<3) + +#define S3C2410_WTCON_PRESCALE(x) ((x) << 8) +#define S3C2410_WTCON_PRESCALE_MASK (0xff00) + +#endif /* __ASM_ARCH_REGS_WATCHDOG_H */ + + diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h new file mode 100644 index 00000000000..9b0d85024cb --- /dev/null +++ b/include/asm-arm/arch-s3c2410/system.h @@ -0,0 +1,90 @@ +/* linux/include/asm-arm/arch-s3c2410/system.h + * + * (c) 2003 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - System function defines and includes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 12-May-2003 BJD Created file + * 14-May-2003 BJD Removed idle to aid debugging + * 12-Jun-2003 BJD Added reset via watchdog + * 04-Sep-2003 BJD Moved to v2.6 + * 28-Oct-2004 BJD Added over-ride for idle, and fixed reset panic() + */ + +#include <asm/hardware.h> +#include <asm/io.h> + +#include <asm/arch/map.h> +#include <asm/arch/idle.h> + +#include <asm/arch/regs-watchdog.h> +#include <asm/arch/regs-clock.h> + +void (*s3c24xx_idle)(void); + +void s3c24xx_default_idle(void) +{ + void __iomem *reg = S3C2410_CLKCON; + unsigned long tmp; + int i; + + /* idle the system by using the idle mode which will wait for an + * interrupt to happen before restarting the system. + */ + + /* Warning: going into idle state upsets jtag scanning */ + + __raw_writel(__raw_readl(reg) | (1<<2), reg); + + /* the samsung port seems to do a loop and then unset idle.. */ + for (i = 0; i < 50; i++) { + tmp += __raw_readl(reg); /* ensure loop not optimised out */ + } + + /* this bit is not cleared on re-start... */ + + __raw_writel(__raw_readl(reg) & ~(1<<2), reg); +} + +static void arch_idle(void) +{ + if (s3c24xx_idle != NULL) + (s3c24xx_idle)(); + else + s3c24xx_default_idle(); +} + + +static void +arch_reset(char mode) +{ + if (mode == 's') { + cpu_reset(0); + } + + printk("arch_reset: attempting watchdog reset\n"); + + __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ + + /* put initial values into count and data */ + __raw_writel(0x100, S3C2410_WTCNT); + __raw_writel(0x100, S3C2410_WTDAT); + + /* set the watchdog to go and reset... */ + __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN | + S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON); + + /* wait for reset to assert... */ + mdelay(5000); + + printk(KERN_ERR "Watchdog reset failed to assert reset\n"); + + /* we'll take a jump through zero as a poor second */ + cpu_reset(0); +} diff --git a/include/asm-arm/arch-s3c2410/timex.h b/include/asm-arm/arch-s3c2410/timex.h new file mode 100644 index 00000000000..3558a3a750b --- /dev/null +++ b/include/asm-arm/arch-s3c2410/timex.h @@ -0,0 +1,32 @@ +/* linux/include/asm-arm/arch-s3c2410/timex.h + * + * (c) 2003-2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - time parameters + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 02-Sep-2003 BJD Created file + * 05-Jan-2004 BJD Updated for Linux 2.6.0 + * 22-Nov-2004 BJD Fixed CLOCK_TICK_RATE + * 10-Jan-2004 BJD Removed s3c2410_clock_tick_rate +*/ + +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H + +/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it + * a variable is useless. It seems as long as we make our timers an + * exact multiple of HZ, any value that makes a 1->1 correspondence + * for the time conversion functions to/from jiffies is acceptable. +*/ + + +#define CLOCK_TICK_RATE 12000000 + + +#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h new file mode 100644 index 00000000000..ad4252e2779 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/uncompress.h @@ -0,0 +1,158 @@ +/* linux/include/asm-arm/arch-s3c2410/uncompress.h + * + * (c) 2003 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - uncompress code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 22-May-2003 BJD Created + * 08-Sep-2003 BJD Moved to linux v2.6 + * 12-Mar-2004 BJD Updated header protection + * 12-Oct-2004 BJD Take account of debug uart configuration + * 15-Nov-2004 BJD Fixed uart configuration + * 22-Feb-2005 BJD Added watchdog to uncompress +*/ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include <linux/config.h> + +/* defines for UART registers */ +#include "asm/arch/regs-serial.h" +#include "asm/arch/regs-gpio.h" +#include "asm/arch/regs-watchdog.h" + +#include <asm/arch/map.h> + +/* working in physical space... */ +#undef S3C2410_GPIOREG +#undef S3C2410_WDOGREG + +#define S3C2410_GPIOREG(x) ((S3C2410_PA_GPIO + (x))) +#define S3C2410_WDOGREG(x) ((S3C2410_PA_WATCHDOG + (x))) + +/* how many bytes we allow into the FIFO at a time in FIFO mode */ +#define FIFO_MAX (14) + +#define uart_base S3C2410_PA_UART + (0x4000*CONFIG_S3C2410_LOWLEVEL_UART_PORT) + +static __inline__ void +uart_wr(unsigned int reg, unsigned int val) +{ + volatile unsigned int *ptr; + + ptr = (volatile unsigned int *)(reg + uart_base); + *ptr = val; +} + +static __inline__ unsigned int +uart_rd(unsigned int reg) +{ + volatile unsigned int *ptr; + + ptr = (volatile unsigned int *)(reg + uart_base); + return *ptr; +} + + +/* we can deal with the case the UARTs are being run + * in FIFO mode, so that we don't hold up our execution + * waiting for tx to happen... +*/ + +static void +putc(char ch) +{ + int cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1); + + cpuid &= S3C2410_GSTATUS1_IDMASK; + + if (ch == '\n') + putc('\r'); /* expand newline to \r\n */ + + if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) { + int level; + + while (1) { + level = uart_rd(S3C2410_UFSTAT); + + if (cpuid == S3C2410_GSTATUS1_2440) { + level &= S3C2440_UFSTAT_TXMASK; + level >>= S3C2440_UFSTAT_TXSHIFT; + } else { + level &= S3C2410_UFSTAT_TXMASK; + level >>= S3C2410_UFSTAT_TXSHIFT; + } + + if (level < FIFO_MAX) + break; + } + + } else { + /* not using fifos */ + + while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE); + } + + /* write byte to transmission register */ + uart_wr(S3C2410_UTXH, ch); +} + +static void +putstr(const char *ptr) +{ + for (; *ptr != '\0'; ptr++) { + putc(*ptr); + } +} + +/* CONFIG_S3C2410_BOOT_WATCHDOG + * + * Simple boot-time watchdog setup, to reboot the system if there is + * any problem with the boot process +*/ + +#ifdef CONFIG_S3C2410_BOOT_WATCHDOG + +#define WDOG_COUNT (0xff00) + +#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0) + +static inline void arch_decomp_wdog(void) +{ + __raw_writel(WDOG_COUNT, S3C2410_WTCNT); +} + +static void arch_decomp_wdog_start(void) +{ + __raw_writel(WDOG_COUNT, S3C2410_WTDAT); + __raw_writel(WDOG_COUNT, S3C2410_WTCNT); + __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON); +} + +#else +#define arch_decomp_wdog_start() +#define arch_decomp_wdog() +#endif + +static void error(char *err); + +static void +arch_decomp_setup(void) +{ + /* we may need to setup the uart(s) here if we are not running + * on an BAST... the BAST will have left the uarts configured + * after calling linux. + */ + + arch_decomp_wdog_start(); +} + + +#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/include/asm-arm/arch-s3c2410/usb-control.h b/include/asm-arm/arch-s3c2410/usb-control.h new file mode 100644 index 00000000000..1cc85a096b2 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/usb-control.h @@ -0,0 +1,45 @@ +/* linux/include/asm-arm/arch-s3c2410/usb-control.h + * + * (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - usb port information + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 11-Sep-2004 BJD Created file + * 21-Sep-2004 BJD Updated port info +*/ + +#ifndef __ASM_ARCH_USBCONTROL_H +#define __ASM_ARCH_USBCONTROL_H "include/asm-arm/arch-s3c2410/usb-control.h" + +#define S3C_HCDFLG_USED (1) + +struct s3c2410_hcd_port { + unsigned char flags; + unsigned char power; + unsigned char oc_status; + unsigned char oc_changed; +}; + +struct s3c2410_hcd_info { + struct usb_hcd *hcd; + struct s3c2410_hcd_port port[2]; + + void (*power_control)(int port, int to); + void (*enable_oc)(struct s3c2410_hcd_info *, int on); + void (*report_oc)(struct s3c2410_hcd_info *, int ports); +}; + +static void inline s3c2410_report_oc(struct s3c2410_hcd_info *info, int ports) +{ + if (info->report_oc != NULL) { + (info->report_oc)(info, ports); + } +} + +#endif /*__ASM_ARCH_USBCONTROL_H */ diff --git a/include/asm-arm/arch-s3c2410/vmalloc.h b/include/asm-arm/arch-s3c2410/vmalloc.h new file mode 100644 index 00000000000..5fe72ad7090 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/vmalloc.h @@ -0,0 +1,36 @@ +/* linux/include/asm-arm/arch-s3c2410/vmalloc.h + * + * from linux/include/asm-arm/arch-iop3xx/vmalloc.h + * + * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 vmalloc definition + * + * Changelog: + * 12-Mar-2004 BJD Fixed header, added include protection + * 12=Mar-2004 BJD Fixed VMALLOC_END definitions + */ + +#ifndef __ASM_ARCH_VMALLOC_H +#define __ASM_ARCH_VMALLOC_H + +/* + * Just any arbitrary offset to the start of the vmalloc VM area: the + * current 8MB value just means that there will be a 8MB "hole" after the + * physical memory until the kernel virtual memory starts. That means that + * any out-of-bounds memory accesses will hopefully be caught. + * The vmalloc() routines leaves a hole of 4kB between each vmalloced + * area for the same reason. ;) + */ + +#define VMALLOC_OFFSET (8*1024*1024) +#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) +#define VMALLOC_VMADDR(x) ((unsigned long)(x)) +#define VMALLOC_END (0xE0000000) + +#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/include/asm-arm/arch-s3c2410/vr1000-cpld.h b/include/asm-arm/arch-s3c2410/vr1000-cpld.h new file mode 100644 index 00000000000..0ee373ac60d --- /dev/null +++ b/include/asm-arm/arch-s3c2410/vr1000-cpld.h @@ -0,0 +1,22 @@ +/* linux/include/asm-arm/arch-s3c2410/vr1000-cpld.h + * + * (c) 2003 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * VR1000 - CPLD control constants + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 25-May-2003 BJD Created file, added CTRL1 registers + * 19-Mar-2004 BJD Added VR1000 CPLD definitions +*/ + +#ifndef __ASM_ARCH_VR1000CPLD_H +#define __ASM_ARCH_VR1000CPLD_H + +#define VR1000_CPLD_CTRL2_RAMWEN (0x04) /* SRAM Write Enable */ + +#endif /* __ASM_ARCH_VR1000CPLD_H */ diff --git a/include/asm-arm/arch-s3c2410/vr1000-irq.h b/include/asm-arm/arch-s3c2410/vr1000-irq.h new file mode 100644 index 00000000000..694f7715d2d --- /dev/null +++ b/include/asm-arm/arch-s3c2410/vr1000-irq.h @@ -0,0 +1,30 @@ +/* linux/include/asm-arm/arch-s3c2410/vr1000-irq.h + * + * (c) 2003,2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Machine VR1000 - IRQ Number definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 06-Jan-2003 BJD Linux 2.6.0 version + * 19-Mar-2004 BJD Updates for VR1000 + */ + +#ifndef __ASM_ARCH_VR1000IRQ_H +#define __ASM_ARCH_VR1000IRQ_H + +/* irq numbers to onboard peripherals */ + +#define IRQ_USBOC IRQ_EINT19 +#define IRQ_IDE0 IRQ_EINT16 +#define IRQ_IDE1 IRQ_EINT17 +#define IRQ_VR1000_SERIAL IRQ_EINT12 +#define IRQ_VR1000_DM9000A IRQ_EINT10 +#define IRQ_VR1000_DM9000N IRQ_EINT9 +#define IRQ_SMALERT IRQ_EINT8 + +#endif /* __ASM_ARCH_VR1000IRQ_H */ diff --git a/include/asm-arm/arch-s3c2410/vr1000-map.h b/include/asm-arm/arch-s3c2410/vr1000-map.h new file mode 100644 index 00000000000..867c9355fd3 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/vr1000-map.h @@ -0,0 +1,116 @@ +/* linux/include/asm-arm/arch-s3c2410/vr1000-map.h + * + * (c) 2003-2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Machine VR1000 - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 06-Jan-2003 BJD Linux 2.6.0 version, split specifics from arch/map.h + * 12-Mar-2004 BJD Fixed header include protection + * 19-Mar-2004 BJD Copied to VR1000 machine headers. + * 19-Jan-2005 BJD Updated map definitions +*/ + +/* needs arch/map.h including with this */ + +/* ok, we've used up to 0x13000000, now we need to find space for the + * peripherals that live in the nGCS[x] areas, which are quite numerous + * in their space. We also have the board's CPLD to find register space + * for. + */ + +#ifndef __ASM_ARCH_VR1000MAP_H +#define __ASM_ARCH_VR1000MAP_H + +#include <asm/arch/bast-map.h> + +#define VR1000_IOADDR(x) BAST_IOADDR(x) + +/* we put the CPLD registers next, to get them out of the way */ + +#define VR1000_VA_CTRL1 VR1000_IOADDR(0x00000000) /* 0x01300000 */ +#define VR1000_PA_CTRL1 (S3C2410_CS5 | 0x7800000) + +#define VR1000_VA_CTRL2 VR1000_IOADDR(0x00100000) /* 0x01400000 */ +#define VR1000_PA_CTRL2 (S3C2410_CS1 | 0x6000000) + +#define VR1000_VA_CTRL3 VR1000_IOADDR(0x00200000) /* 0x01500000 */ +#define VR1000_PA_CTRL3 (S3C2410_CS1 | 0x6800000) + +#define VR1000_VA_CTRL4 VR1000_IOADDR(0x00300000) /* 0x01600000 */ +#define VR1000_PA_CTRL4 (S3C2410_CS1 | 0x7000000) + +/* next, we have the PC104 ISA interrupt registers */ + +#define VR1000_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */ +#define VR1000_VA_PC104_IRQREQ VR1000_IOADDR(0x00400000) + +#define VR1000_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */ +#define VR1000_VA_PC104_IRQRAW VR1000_IOADDR(0x00500000) + +#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */ +#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000) + +/* 0xE0000000 contains the IO space that is split by speed and + * wether the access is for 8 or 16bit IO... this ensures that + * the correct access is made + * + * 0x10000000 of space, partitioned as so: + * + * 0x00000000 to 0x04000000 8bit, slow + * 0x04000000 to 0x08000000 16bit, slow + * 0x08000000 to 0x0C000000 16bit, net + * 0x0C000000 to 0x10000000 16bit, fast + * + * each of these spaces has the following in: + * + * 0x02000000 to 0x02100000 1MB IDE primary channel + * 0x02100000 to 0x02200000 1MB IDE primary channel aux + * 0x02200000 to 0x02400000 1MB IDE secondary channel + * 0x02300000 to 0x02400000 1MB IDE secondary channel aux + * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controllers + * 0x02600000 to 0x02700000 1MB + * + * the phyiscal layout of the zones are: + * nGCS2 - 8bit, slow + * nGCS3 - 16bit, slow + * nGCS4 - 16bit, net + * nGCS5 - 16bit, fast + */ + +#define VR1000_VA_MULTISPACE (0xE0000000) + +#define VR1000_VA_ISAIO (VR1000_VA_MULTISPACE + 0x00000000) +#define VR1000_VA_ISAMEM (VR1000_VA_MULTISPACE + 0x01000000) +#define VR1000_VA_IDEPRI (VR1000_VA_MULTISPACE + 0x02000000) +#define VR1000_VA_IDEPRIAUX (VR1000_VA_MULTISPACE + 0x02100000) +#define VR1000_VA_IDESEC (VR1000_VA_MULTISPACE + 0x02200000) +#define VR1000_VA_IDESECAUX (VR1000_VA_MULTISPACE + 0x02300000) +#define VR1000_VA_ASIXNET (VR1000_VA_MULTISPACE + 0x02400000) +#define VR1000_VA_DM9000 (VR1000_VA_MULTISPACE + 0x02500000) +#define VR1000_VA_SUPERIO (VR1000_VA_MULTISPACE + 0x02600000) + +/* physical offset addresses for the peripherals */ + +#define VR1000_PA_IDEPRI (0x02000000) +#define VR1000_PA_IDEPRIAUX (0x02800000) +#define VR1000_PA_IDESEC (0x03000000) +#define VR1000_PA_IDESECAUX (0x03800000) +#define VR1000_PA_DM9000 (0x05000000) + +#define VR1000_PA_SERIAL (0x11800000) +#define VR1000_VA_SERIAL (VR1000_IOADDR(0x00700000)) + +/* VR1000 ram is in CS1, with A26..A24 = 2_101 */ +#define VR1000_PA_SRAM (S3C2410_CS1 | 0x05000000) + +/* some configurations for the peripherals */ + +#define VR1000_DM9000_CS VR1000_VAM_CS4 + +#endif /* __ASM_ARCH_VR1000MAP_H */ |