pxafb: convert fb driver to use ioremap() and __raw_{readl, writel}

This is part of the effort moving peripheral registers outside of pxa-regs.h,
and using ioremap() make it possible the same IP can be re-used on different
processors with different registers space

As a result, the fixed mapping in pxa_map_io() is removed.

The regs-lcd.h can actually moved to where closer to pxafb.c but some of its
bit definitions are directly used by various platform code, though this is not
a good style.

Signed-off-by: eric miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 0 insertions, 196 deletions

diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index a322012f16a..4b2ea1e95c5 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -1406,202 +1406,6 @@
 #define OSCC_OON	(1 << 1)	/* 32.768kHz OON (write-once only bit) */
 #define OSCC_OOK	(1 << 0)	/* 32.768kHz OOK (read-only bit) */
 
-
-/*
- * LCD
- */
-
-#define LCCR0		__REG(0x44000000)  /* LCD Controller Control Register 0 */
-#define LCCR1		__REG(0x44000004)  /* LCD Controller Control Register 1 */
-#define LCCR2		__REG(0x44000008)  /* LCD Controller Control Register 2 */
-#define LCCR3		__REG(0x4400000C)  /* LCD Controller Control Register 3 */
-#define LCCR4		__REG(0x44000010)  /* LCD Controller Control Register 3 */
-#define DFBR0		__REG(0x44000020)  /* DMA Channel 0 Frame Branch Register */
-#define DFBR1		__REG(0x44000024)  /* DMA Channel 1 Frame Branch Register */
-#define LCSR		__REG(0x44000038)  /* LCD Controller Status Register */
-#define LIIDR		__REG(0x4400003C)  /* LCD Controller Interrupt ID Register */
-#define TMEDRGBR	__REG(0x44000040)  /* TMED RGB Seed Register */
-#define TMEDCR		__REG(0x44000044)  /* TMED Control Register */
-
-#define LCCR3_1BPP (0 << 24)
-#define LCCR3_2BPP (1 << 24)
-#define LCCR3_4BPP (2 << 24)
-#define LCCR3_8BPP (3 << 24)
-#define LCCR3_16BPP (4 << 24)
-
-#define LCCR3_PDFOR_0 (0 << 30)
-#define LCCR3_PDFOR_1 (1 << 30)
-#define LCCR3_PDFOR_2 (2 << 30)
-#define LCCR3_PDFOR_3 (3 << 30)
-
-#define LCCR4_PAL_FOR_0 (0 << 15)
-#define LCCR4_PAL_FOR_1 (1 << 15)
-#define LCCR4_PAL_FOR_2 (2 << 15)
-#define LCCR4_PAL_FOR_MASK (3 << 15)
-
-#define FDADR0		__REG(0x44000200)  /* DMA Channel 0 Frame Descriptor Address Register */
-#define FSADR0		__REG(0x44000204)  /* DMA Channel 0 Frame Source Address Register */
-#define FIDR0		__REG(0x44000208)  /* DMA Channel 0 Frame ID Register */
-#define LDCMD0		__REG(0x4400020C)  /* DMA Channel 0 Command Register */
-#define FDADR1		__REG(0x44000210)  /* DMA Channel 1 Frame Descriptor Address Register */
-#define FSADR1		__REG(0x44000214)  /* DMA Channel 1 Frame Source Address Register */
-#define FIDR1		__REG(0x44000218)  /* DMA Channel 1 Frame ID Register */
-#define LDCMD1		__REG(0x4400021C)  /* DMA Channel 1 Command Register */
-
-#define LCCR0_ENB	(1 << 0)	/* LCD Controller enable */
-#define LCCR0_CMS	(1 << 1)	/* Color/Monochrome Display Select */
-#define LCCR0_Color     (LCCR0_CMS*0)   /*  Color display                  */
-#define LCCR0_Mono      (LCCR0_CMS*1)   /*  Monochrome display             */
-#define LCCR0_SDS	(1 << 2)	/* Single/Dual Panel Display       */
-                                        /* Select                          */
-#define LCCR0_Sngl      (LCCR0_SDS*0)   /*  Single panel display           */
-#define LCCR0_Dual      (LCCR0_SDS*1)   /*  Dual panel display             */
-
-#define LCCR0_LDM	(1 << 3)	/* LCD Disable Done Mask */
-#define LCCR0_SFM	(1 << 4)	/* Start of frame mask */
-#define LCCR0_IUM	(1 << 5)	/* Input FIFO underrun mask */
-#define LCCR0_EFM	(1 << 6)	/* End of Frame mask */
-#define LCCR0_PAS	(1 << 7)	/* Passive/Active display Select   */
-#define LCCR0_Pas       (LCCR0_PAS*0)   /*  Passive display (STN)          */
-#define LCCR0_Act       (LCCR0_PAS*1)   /*  Active display (TFT)           */
-#define LCCR0_DPD	(1 << 9)	/* Double Pixel Data (monochrome   */
-                                        /* display mode)                   */
-#define LCCR0_4PixMono  (LCCR0_DPD*0)   /*  4-Pixel/clock Monochrome       */
-                                        /*  display                        */
-#define LCCR0_8PixMono  (LCCR0_DPD*1)   /*  8-Pixel/clock Monochrome       */
-                                        /*  display                        */
-#define LCCR0_DIS	(1 << 10)	/* LCD Disable */
-#define LCCR0_QDM	(1 << 11)	/* LCD Quick Disable mask */
-#define LCCR0_PDD	(0xff << 12)	/* Palette DMA request delay */
-#define LCCR0_PDD_S	12
-#define LCCR0_BM	(1 << 20) 	/* Branch mask */
-#define LCCR0_OUM	(1 << 21)	/* Output FIFO underrun mask */
-#define LCCR0_LCDT      (1 << 22)       /* LCD panel type */
-#define LCCR0_RDSTM     (1 << 23)       /* Read status interrupt mask */
-#define LCCR0_CMDIM     (1 << 24)       /* Command interrupt mask */
-#define LCCR0_OUC       (1 << 25)       /* Overlay Underlay control bit */
-#define LCCR0_LDDALT    (1 << 26)       /* LDD alternate mapping control */
-
-#define LCCR1_PPL       Fld (10, 0)      /* Pixels Per Line - 1 */
-#define LCCR1_DisWdth(Pixel)            /* Display Width [1..800 pix.]  */ \
-                        (((Pixel) - 1) << FShft (LCCR1_PPL))
-
-#define LCCR1_HSW       Fld (6, 10)     /* Horizontal Synchronization     */
-#define LCCR1_HorSnchWdth(Tpix)         /* Horizontal Synchronization     */ \
-                                        /* pulse Width [1..64 Tpix]       */ \
-                        (((Tpix) - 1) << FShft (LCCR1_HSW))
-
-#define LCCR1_ELW       Fld (8, 16)     /* End-of-Line pixel clock Wait    */
-                                        /* count - 1 [Tpix]                */
-#define LCCR1_EndLnDel(Tpix)            /*  End-of-Line Delay              */ \
-                                        /*  [1..256 Tpix]                  */ \
-                        (((Tpix) - 1) << FShft (LCCR1_ELW))
-
-#define LCCR1_BLW       Fld (8, 24)     /* Beginning-of-Line pixel clock   */
-                                        /* Wait count - 1 [Tpix]           */
-#define LCCR1_BegLnDel(Tpix)            /*  Beginning-of-Line Delay        */ \
-                                        /*  [1..256 Tpix]                  */ \
-                        (((Tpix) - 1) << FShft (LCCR1_BLW))
-
-
-#define LCCR2_LPP       Fld (10, 0)     /* Line Per Panel - 1              */
-#define LCCR2_DisHght(Line)             /*  Display Height [1..1024 lines] */ \
-                        (((Line) - 1) << FShft (LCCR2_LPP))
-
-#define LCCR2_VSW       Fld (6, 10)     /* Vertical Synchronization pulse  */
-                                        /* Width - 1 [Tln] (L_FCLK)        */
-#define LCCR2_VrtSnchWdth(Tln)          /*  Vertical Synchronization pulse */ \
-                                        /*  Width [1..64 Tln]              */ \
-                        (((Tln) - 1) << FShft (LCCR2_VSW))
-
-#define LCCR2_EFW       Fld (8, 16)     /* End-of-Frame line clock Wait    */
-                                        /* count [Tln]                     */
-#define LCCR2_EndFrmDel(Tln)            /*  End-of-Frame Delay             */ \
-                                        /*  [0..255 Tln]                   */ \
-                        ((Tln) << FShft (LCCR2_EFW))
-
-#define LCCR2_BFW       Fld (8, 24)     /* Beginning-of-Frame line clock   */
-                                        /* Wait count [Tln]                */
-#define LCCR2_BegFrmDel(Tln)            /*  Beginning-of-Frame Delay       */ \
-                                        /*  [0..255 Tln]                   */ \
-                        ((Tln) << FShft (LCCR2_BFW))
-
-#if 0
-#define LCCR3_PCD	(0xff)		/* Pixel clock divisor */
-#define LCCR3_ACB	(0xff << 8)	/* AC Bias pin frequency */
-#define LCCR3_ACB_S	8
-#endif
-
-#define LCCR3_API	(0xf << 16)	/* AC Bias pin trasitions per interrupt */
-#define LCCR3_API_S	16
-#define LCCR3_VSP	(1 << 20)	/* vertical sync polarity */
-#define LCCR3_HSP	(1 << 21)	/* horizontal sync polarity */
-#define LCCR3_PCP	(1 << 22)	/* Pixel Clock Polarity (L_PCLK)   */
-#define LCCR3_PixRsEdg  (LCCR3_PCP*0)   /*  Pixel clock Rising-Edge        */
-#define LCCR3_PixFlEdg  (LCCR3_PCP*1)   /*  Pixel clock Falling-Edge       */
-
-#define LCCR3_OEP       (1 << 23)       /* Output Enable Polarity (L_BIAS, */
-                                        /* active display mode)            */
-#define LCCR3_OutEnH    (LCCR3_OEP*0)   /*  Output Enable active High      */
-#define LCCR3_OutEnL    (LCCR3_OEP*1)   /*  Output Enable active Low       */
-
-#if 0
-#define LCCR3_BPP	(7 << 24)	/* bits per pixel */
-#define LCCR3_BPP_S	24
-#endif
-#define LCCR3_DPC	(1 << 27)	/* double pixel clock mode */
-
-
-#define LCCR3_PCD       Fld (8, 0)      /* Pixel Clock Divisor */
-#define LCCR3_PixClkDiv(Div)            /* Pixel Clock Divisor */ \
-                        (((Div) << FShft (LCCR3_PCD)))
-
-
-#define LCCR3_BPP       Fld (3, 24)     /* Bit Per Pixel */
-#define LCCR3_Bpp(Bpp)                  /* Bit Per Pixel */ \
-                        (((Bpp) << FShft (LCCR3_BPP)))
-
-#define LCCR3_ACB       Fld (8, 8)      /* AC Bias */
-#define LCCR3_Acb(Acb)                  /* BAC Bias */ \
-                        (((Acb) << FShft (LCCR3_ACB)))
-
-#define LCCR3_HorSnchH  (LCCR3_HSP*0)   /*  Horizontal Synchronization     */
-                                        /*  pulse active High              */
-#define LCCR3_HorSnchL  (LCCR3_HSP*1)   /*  Horizontal Synchronization     */
-
-#define LCCR3_VrtSnchH  (LCCR3_VSP*0)   /*  Vertical Synchronization pulse */
-                                        /*  active High                    */
-#define LCCR3_VrtSnchL  (LCCR3_VSP*1)   /*  Vertical Synchronization pulse */
-                                        /*  active Low                     */
-
-#define LCSR_LDD	(1 << 0)	/* LCD Disable Done */
-#define LCSR_SOF	(1 << 1)	/* Start of frame */
-#define LCSR_BER	(1 << 2)	/* Bus error */
-#define LCSR_ABC	(1 << 3)	/* AC Bias count */
-#define LCSR_IUL	(1 << 4)	/* input FIFO underrun Lower panel */
-#define LCSR_IUU	(1 << 5)	/* input FIFO underrun Upper panel */
-#define LCSR_OU		(1 << 6)	/* output FIFO underrun */
-#define LCSR_QD		(1 << 7)	/* quick disable */
-#define LCSR_EOF	(1 << 8)	/* end of frame */
-#define LCSR_BS		(1 << 9)	/* branch status */
-#define LCSR_SINT	(1 << 10)	/* subsequent interrupt */
-
-#define LDCMD_PAL	(1 << 26)	/* instructs DMA to load palette buffer */
-
-#define LCSR_LDD	(1 << 0)	/* LCD Disable Done */
-#define LCSR_SOF	(1 << 1)	/* Start of frame */
-#define LCSR_BER	(1 << 2)	/* Bus error */
-#define LCSR_ABC	(1 << 3)	/* AC Bias count */
-#define LCSR_IUL	(1 << 4)	/* input FIFO underrun Lower panel */
-#define LCSR_IUU	(1 << 5)	/* input FIFO underrun Upper panel */
-#define LCSR_OU		(1 << 6)	/* output FIFO underrun */
-#define LCSR_QD		(1 << 7)	/* quick disable */
-#define LCSR_EOF	(1 << 8)	/* end of frame */
-#define LCSR_BS		(1 << 9)	/* branch status */
-#define LCSR_SINT	(1 << 10)	/* subsequent interrupt */
-
-#define LDCMD_PAL	(1 << 26)	/* instructs DMA to load palette buffer */
-
 #ifdef CONFIG_PXA27x
 
 /* Camera Interface */