Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (27 commits)
  [ARM] 3433/1: ARM: OMAP: 8/8 Update board files
  [ARM] 3455/1: ARM: OMAP: 7/8 Misc updates, take 2
  [ARM] 3454/1: ARM: OMAP: 6/8 Update framebuffer low-level init code, take 2
  [ARM] 3430/1: ARM: OMAP: 5/8 Update PM
  [ARM] 3429/1: ARM: OMAP: 4/8 Update GPIO
  [ARM] 3428/1: ARM: OMAP: 3/8 Update pin multiplexing
  [ARM] 3427/1: ARM: OMAP: 2/8 Update timers
  [ARM] 3426/1: ARM: OMAP: 1/8 Update clock framework
  [ARM] 3396/2: AT91RM9200 Platform devices update
  [ARM] 3395/2: AT91RM9200 Dataflash Card vs MMC selection
  [ARM] 3393/2: AT91RM9200 LED support
  [ARM] 3453/1: Poodle: Correctly set the memory size
  [ARM] 3446/1: i.MX: MMC/SD SDHC controller registration for i.MX/MX1 MX1ADS board
  [ARM] 3444/1: i.MX: Scatter-gather DMA emulation for i.MX/MX1
  [ARM] 3451/1: ep93xx: use the m48t86 rtc driver on the ts72xx platform
  [ARM] 3450/1: ep93xx: use the ep93xx rtc driver
  [ARM] 3452/1: [S3C2410] RX3715 - add nand information
  [ARM] 3449/1: [S3C2410] Anubis - fix NAND timings
  [ARM] 3448/1: [S3C2410] Settle delay when _enabling_ USB PLL
  [ARM] 3442/1: [S3C2410] SMDK: NAND device setup
  ...

1 files changed, 27 insertions, 3 deletions

diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h
index a0040cd8663..6d6240a4681 100644
--- a/include/asm-arm/arch-omap/board.h
+++ b/include/asm-arm/arch-omap/board.h
@@ -21,9 +21,12 @@
 #define OMAP_TAG_LCD		0x4f05
 #define OMAP_TAG_GPIO_SWITCH	0x4f06
 #define OMAP_TAG_UART		0x4f07
+#define OMAP_TAG_FBMEM		0x4f08
+#define OMAP_TAG_STI_CONSOLE	0x4f09
 
 #define OMAP_TAG_BOOT_REASON    0x4f80
 #define OMAP_TAG_FLASH_PART	0x4f81
+#define OMAP_TAG_VERSION_STR	0x4f82
 
 struct omap_clock_config {
 	/* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
@@ -54,6 +57,11 @@ struct omap_serial_console_config {
 	u32 console_speed;
 };
 
+struct omap_sti_console_config {
+	unsigned enable:1;
+	u8 channel;
+};
+
 struct omap_usb_config {
 	/* Configure drivers according to the connectors on your board:
 	 *  - "A" connector (rectagular)
@@ -87,6 +95,13 @@ struct omap_lcd_config {
 	char ctrl_name[16];
 };
 
+struct omap_fbmem_config {
+	u32 fb_sram_start;
+	u32 fb_sram_size;
+	u32 fb_sdram_start;
+	u32 fb_sdram_size;
+};
+
 /* Cover:
  *      high -> closed
  *      low  -> open
@@ -106,6 +121,12 @@ struct omap_gpio_switch_config {
 	int key_code:24; /* Linux key code */
 };
 
+struct omap_uart_config {
+	/* Bit field of UARTs present; bit 0 --> UART1 */
+	unsigned int enabled_uarts;
+};
+
+
 struct omap_flash_part_config {
 	char part_table[0];
 };
@@ -114,11 +135,14 @@ struct omap_boot_reason_config {
 	char reason_str[12];
 };
 
-struct omap_uart_config {
-	/* Bit field of UARTs present; bit 0 --> UART1 */
-	unsigned int enabled_uarts;
+struct omap_version_config {
+	char component[12];
+	char version[12];
 };
 
+
+#include <asm-arm/arch-omap/board-nokia.h>
+
 struct omap_board_config_entry {
 	u16 tag;
 	u16 len;