Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

15 files changed, 1215 insertions, 0 deletions

diff --git a/include/asm-arm/arch-imx/debug-macro.S b/include/asm-arm/arch-imx/debug-macro.S
new file mode 100644
index 00000000000..83f552f7bcc
--- /dev/null
+++ b/include/asm-arm/arch-imx/debug-macro.S
@@ -0,0 +1,34 @@
+/* linux/include/asm-arm/arch-imx/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x00000000	@ physical
+		movne	\rx, #0xe0000000	@ virtual
+		orr	\rx, \rx, #0x00200000
+		orr	\rx, \rx, #0x00006000	@ UART1 offset
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x40]	@ TXDATA
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #0x98]	@ SR2
+		tst	\rd, #1 << 3		@ TXDC
+		beq	1002b			@ wait until transmit done
+		.endm
diff --git a/include/asm-arm/arch-imx/dma.h b/include/asm-arm/arch-imx/dma.h
new file mode 100644
index 00000000000..dbdc0178041
--- /dev/null
+++ b/include/asm-arm/arch-imx/dma.h
@@ -0,0 +1,71 @@
+/*
+ *  linux/include/asm-arm/imxads/dma.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#define MAX_DMA_ADDRESS		0xffffffff
+
+#define MAX_DMA_CHANNELS	0
+
+/*
+ * DMA registration
+ */
+
+typedef enum {
+	DMA_PRIO_HIGH = 0,
+	DMA_PRIO_MEDIUM = 3,
+	DMA_PRIO_LOW = 6
+} imx_dma_prio;
+
+int imx_request_dma(char *name, imx_dma_prio prio,
+		    void (*irq_handler) (int, void *, struct pt_regs *),
+		    void (*err_handler) (int, void *, struct pt_regs *),
+		    void *data);
+
+void imx_free_dma(int dma_ch);
+
+
+#define DMA_REQ_UART3_T        2
+#define DMA_REQ_UART3_R        3
+#define DMA_REQ_SSI2_T         4
+#define DMA_REQ_SSI2_R         5
+#define DMA_REQ_CSI_STAT       6
+#define DMA_REQ_CSI_R          7
+#define DMA_REQ_MSHC           8
+#define DMA_REQ_DSPA_DCT_DOUT  9
+#define DMA_REQ_DSPA_DCT_DIN  10
+#define DMA_REQ_DSPA_MAC      11
+#define DMA_REQ_EXT           12
+#define DMA_REQ_SDHC          13
+#define DMA_REQ_SPI1_R        14
+#define DMA_REQ_SPI1_T        15
+#define DMA_REQ_SSI_T         16
+#define DMA_REQ_SSI_R         17
+#define DMA_REQ_ASP_DAC       18
+#define DMA_REQ_ASP_ADC       19
+#define DMA_REQ_USP_EP(x)    (20+(x))
+#define DMA_REQ_SPI2_R        26
+#define DMA_REQ_SPI2_T        27
+#define DMA_REQ_UART2_T       28
+#define DMA_REQ_UART2_R       29
+#define DMA_REQ_UART1_T       30
+#define DMA_REQ_UART1_R       31
+
+#endif				/* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-imx/entry-macro.S b/include/asm-arm/arch-imx/entry-macro.S
new file mode 100644
index 00000000000..b40ea7cf88e
--- /dev/null
+++ b/include/asm-arm/arch-imx/entry-macro.S
@@ -0,0 +1,29 @@
+/*
+ * include/asm-arm/arch-imx/entry-macro.S
+ *
+ * Low-level IRQ helper macros for iMX-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+		.macro	disable_fiq
+		.endm
+#define AITC_NIVECSR   0x40
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, =IO_ADDRESS(IMX_AITC_BASE)
+		@ Load offset & priority of the highest priority
+		@ interrupt pending.
+		ldr	\irqnr, [\irqstat, #AITC_NIVECSR]
+		@ Shift off the priority leaving the offset or
+		@ "interrupt number"
+		mov	\irqnr, \irqnr, lsr #16
+ 		ldr	\irqstat, =1	@ dummy compare
+		ldr	\base, =0xFFFF		// invalid interrupt
+		cmp	\irqnr, \base
+		bne	1001f
+		ldr	\irqstat, =0
+1001:
+		tst	\irqstat, #1	@ to make the condition code = TRUE
+		.endm
+
diff --git a/include/asm-arm/arch-imx/hardware.h b/include/asm-arm/arch-imx/hardware.h
new file mode 100644
index 00000000000..adffb6acf42
--- /dev/null
+++ b/include/asm-arm/arch-imx/hardware.h
@@ -0,0 +1,99 @@
+/*
+ *  linux/include/asm-arm/arch-imx/hardware.h
+ *
+ *  Copyright (C) 1999 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include "imx-regs.h"
+
+#ifndef __ASSEMBLY__
+# define __REG(x)	(*((volatile u32 *)IO_ADDRESS(x)))
+
+# define __REG2(x,y)        (*(volatile u32 *)((u32)&__REG(x) + (y)))
+#endif
+
+/*
+ * Memory map
+ */
+
+#define IMX_IO_PHYS		0x00200000
+#define IMX_IO_SIZE		0x00100000
+#define IMX_IO_BASE		0xe0000000
+
+#define IMX_CS0_PHYS		0x10000000
+#define IMX_CS0_SIZE		0x02000000
+#define IMX_CS0_VIRT		0xe8000000
+
+#define IMX_CS1_PHYS		0x12000000
+#define IMX_CS1_SIZE		0x01000000
+#define IMX_CS1_VIRT		0xea000000
+
+#define IMX_CS2_PHYS		0x13000000
+#define IMX_CS2_SIZE		0x01000000
+#define IMX_CS2_VIRT		0xeb000000
+
+#define IMX_CS3_PHYS		0x14000000
+#define IMX_CS3_SIZE		0x01000000
+#define IMX_CS3_VIRT		0xec000000
+
+#define IMX_CS4_PHYS		0x15000000
+#define IMX_CS4_SIZE		0x01000000
+#define IMX_CS4_VIRT		0xed000000
+
+#define IMX_CS5_PHYS		0x16000000
+#define IMX_CS5_SIZE		0x01000000
+#define IMX_CS5_VIRT		0xee000000
+
+#define IMX_FB_VIRT		0xF1000000
+#define IMX_FB_SIZE		(256*1024)
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) ((x) | IMX_IO_BASE)
+
+#ifndef __ASSEMBLY__
+/*
+ * Handy routine to set GPIO functions
+ */
+extern void imx_gpio_mode( int gpio_mode );
+
+/* get frequencies in Hz */
+extern unsigned int imx_get_system_clk(void);
+extern unsigned int imx_get_mcu_clk(void);
+extern unsigned int imx_get_perclk1(void); /* UART[12], Timer[12], PWM */
+extern unsigned int imx_get_perclk2(void); /* LCD, SD, SPI[12]         */
+extern unsigned int imx_get_perclk3(void); /* SSI                      */
+extern unsigned int imx_get_hclk(void);    /* SDRAM, CSI, Memory Stick,*/
+                                           /* I2C, DMA                 */
+#endif
+
+#define MAXIRQNUM                       62
+#define MAXFIQNUM                       62
+#define MAXSWINUM                       62
+
+/*
+ * Use SDRAM for memory
+ */
+#define MEM_SIZE		0x01000000
+
+#ifdef CONFIG_ARCH_MX1ADS
+#include "mx1ads.h"
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-imx/imx-regs.h b/include/asm-arm/arch-imx/imx-regs.h
new file mode 100644
index 00000000000..f32c203952c
--- /dev/null
+++ b/include/asm-arm/arch-imx/imx-regs.h
@@ -0,0 +1,548 @@
+#ifndef _IMX_REGS_H
+#define _IMX_REGS_H
+/* ------------------------------------------------------------------------
+ *  Motorola IMX system registers
+ * ------------------------------------------------------------------------
+ *
+ */
+
+/*
+ *  Register BASEs, based on OFFSETs
+ *
+ */
+#define IMX_AIPI1_BASE             (0x00000 + IMX_IO_BASE)
+#define IMX_WDT_BASE               (0x01000 + IMX_IO_BASE)
+#define IMX_TIM1_BASE              (0x02000 + IMX_IO_BASE)
+#define IMX_TIM2_BASE              (0x03000 + IMX_IO_BASE)
+#define IMX_RTC_BASE               (0x04000 + IMX_IO_BASE)
+#define IMX_LCDC_BASE              (0x05000 + IMX_IO_BASE)
+#define IMX_UART1_BASE             (0x06000 + IMX_IO_BASE)
+#define IMX_UART2_BASE             (0x07000 + IMX_IO_BASE)
+#define IMX_PWM_BASE               (0x08000 + IMX_IO_BASE)
+#define IMX_DMAC_BASE              (0x09000 + IMX_IO_BASE)
+#define IMX_AIPI2_BASE             (0x10000 + IMX_IO_BASE)
+#define IMX_SIM_BASE               (0x11000 + IMX_IO_BASE)
+#define IMX_USBD_BASE              (0x12000 + IMX_IO_BASE)
+#define IMX_SPI1_BASE              (0x13000 + IMX_IO_BASE)
+#define IMX_MMC_BASE               (0x14000 + IMX_IO_BASE)
+#define IMX_ASP_BASE               (0x15000 + IMX_IO_BASE)
+#define IMX_BTA_BASE               (0x16000 + IMX_IO_BASE)
+#define IMX_I2C_BASE               (0x17000 + IMX_IO_BASE)
+#define IMX_SSI_BASE               (0x18000 + IMX_IO_BASE)
+#define IMX_SPI2_BASE              (0x19000 + IMX_IO_BASE)
+#define IMX_MSHC_BASE              (0x1A000 + IMX_IO_BASE)
+#define IMX_PLL_BASE               (0x1B000 + IMX_IO_BASE)
+#define IMX_GPIO_BASE              (0x1C000 + IMX_IO_BASE)
+#define IMX_EIM_BASE               (0x20000 + IMX_IO_BASE)
+#define IMX_SDRAMC_BASE            (0x21000 + IMX_IO_BASE)
+#define IMX_MMA_BASE               (0x22000 + IMX_IO_BASE)
+#define IMX_AITC_BASE              (0x23000 + IMX_IO_BASE)
+#define IMX_CSI_BASE               (0x24000 + IMX_IO_BASE)
+
+/* PLL registers */
+#define CSCR   __REG(IMX_PLL_BASE)        /* Clock Source Control Register */
+#define CSCR_SYSTEM_SEL (1<<16)
+
+#define MPCTL0 __REG(IMX_PLL_BASE + 0x4)  /* MCU PLL Control Register 0 */
+#define MPCTL1 __REG(IMX_PLL_BASE + 0x8)  /* MCU PLL and System Clock Register 1 */
+#define SPCTL0 __REG(IMX_PLL_BASE + 0xc)  /* System PLL Control Register 0 */
+#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */
+#define PCDR   __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */
+
+#define CSCR_MPLL_RESTART (1<<21)
+
+/*
+ *  GPIO Module and I/O Multiplexer
+ *  x = 0..3 for reg_A, reg_B, reg_C, reg_D
+ */
+#define DDIR(x)    __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8)
+#define OCR1(x)    __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8)
+#define OCR2(x)    __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8)
+#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8)
+#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8)
+#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8)
+#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8)
+#define DR(x)      __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8)
+#define GIUS(x)    __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8)
+#define SSR(x)     __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8)
+#define ICR1(x)    __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8)
+#define ICR2(x)    __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8)
+#define IMR(x)     __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8)
+#define ISR(x)     __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8)
+#define GPR(x)     __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8)
+#define SWR(x)     __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8)
+#define PUEN(x)    __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8)
+
+#define GPIO_PIN_MASK 0x1f
+#define GPIO_PORT_MASK (0x3 << 5)
+
+#define GPIO_PORTA (0<<5)
+#define GPIO_PORTB (1<<5)
+#define GPIO_PORTC (2<<5)
+#define GPIO_PORTD (3<<5)
+
+#define GPIO_OUT   (1<<7)
+#define GPIO_IN    (0<<7)
+#define GPIO_PUEN  (1<<8)
+
+#define GPIO_PF    (0<<9)
+#define GPIO_AF    (1<<9)
+
+#define GPIO_OCR_MASK (3<<10)
+#define GPIO_AIN   (0<<10)
+#define GPIO_BIN   (1<<10)
+#define GPIO_CIN   (2<<10)
+#define GPIO_GPIO  (3<<10)
+
+#define GPIO_AOUT  (1<<12)
+#define GPIO_BOUT  (1<<13)
+
+/* assignements for GPIO alternate/primary functions */
+
+/* FIXME: This list is not completed. The correct directions are
+ * missing on some (many) pins
+ */
+#define PA0_PF_A24           ( GPIO_PORTA | GPIO_PF | 0 )
+#define PA0_AIN_SPI2_CLK     ( GPIO_PORTA | GPIO_OUT | GPIO_AIN | 0 )
+#define PA0_AF_ETMTRACESYNC  ( GPIO_PORTA | GPIO_AF | 0 )
+#define PA1_AOUT_SPI2_RXD    ( GPIO_PORTA | GPIO_IN | GPIO_AOUT | 1 )
+#define PA1_PF_TIN           ( GPIO_PORTA | GPIO_PF | 1 )
+#define PA2_PF_PWM0          ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 )
+#define PA3_PF_CSI_MCLK      ( GPIO_PORTA | GPIO_PF | 3 )
+#define PA4_PF_CSI_D0        ( GPIO_PORTA | GPIO_PF | 4 )
+#define PA5_PF_CSI_D1        ( GPIO_PORTA | GPIO_PF | 5 )
+#define PA6_PF_CSI_D2        ( GPIO_PORTA | GPIO_PF | 6 )
+#define PA7_PF_CSI_D3        ( GPIO_PORTA | GPIO_PF | 7 )
+#define PA8_PF_CSI_D4        ( GPIO_PORTA | GPIO_PF | 8 )
+#define PA9_PF_CSI_D5        ( GPIO_PORTA | GPIO_PF | 9 )
+#define PA10_PF_CSI_D6       ( GPIO_PORTA | GPIO_PF | 10 )
+#define PA11_PF_CSI_D7       ( GPIO_PORTA | GPIO_PF | 11 )
+#define PA12_PF_CSI_VSYNC    ( GPIO_PORTA | GPIO_PF | 12 )
+#define PA13_PF_CSI_HSYNC    ( GPIO_PORTA | GPIO_PF | 13 )
+#define PA14_PF_CSI_PIXCLK   ( GPIO_PORTA | GPIO_PF | 14 )
+#define PA15_PF_I2C_SDA      ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 )
+#define PA16_PF_I2C_SCL      ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 )
+#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 )
+#define PA17_AIN_SPI2_SS     ( GPIO_PORTA | GPIO_AIN | 17 )
+#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 )
+#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 )
+#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 )
+#define PA21_PF_A0           ( GPIO_PORTA | GPIO_PF | 21 )
+#define PA22_PF_CS4          ( GPIO_PORTA | GPIO_PF | 22 )
+#define PA23_PF_CS5          ( GPIO_PORTA | GPIO_PF | 23 )
+#define PA24_PF_A16          ( GPIO_PORTA | GPIO_PF | 24 )
+#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 )
+#define PA25_PF_A17          ( GPIO_PORTA | GPIO_PF | 25 )
+#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 )
+#define PA26_PF_A18          ( GPIO_PORTA | GPIO_PF | 26 )
+#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 )
+#define PA27_PF_A19          ( GPIO_PORTA | GPIO_PF | 27 )
+#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 )
+#define PA28_PF_A20          ( GPIO_PORTA | GPIO_PF | 28 )
+#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 )
+#define PA29_PF_A21          ( GPIO_PORTA | GPIO_PF | 29 )
+#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 )
+#define PA30_PF_A22          ( GPIO_PORTA | GPIO_PF | 30 )
+#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 )
+#define PA31_PF_A23          ( GPIO_PORTA | GPIO_PF | 31 )
+#define PA31_AF_ETMTRACECLK  ( GPIO_PORTA | GPIO_AF | 31 )
+#define PB8_PF_SD_DAT0       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 )
+#define PB8_AF_MS_PIO        ( GPIO_PORTB | GPIO_AF | 8 )
+#define PB9_PF_SD_DAT1       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 9 )
+#define PB9_AF_MS_PI1        ( GPIO_PORTB | GPIO_AF | 9 )
+#define PB10_PF_SD_DAT2      ( GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 10 )
+#define PB10_AF_MS_SCLKI     ( GPIO_PORTB | GPIO_AF | 10 )
+#define PB11_PF_SD_DAT3      ( GPIO_PORTB | GPIO_PF | 11 )
+#define PB11_AF_MS_SDIO      ( GPIO_PORTB | GPIO_AF | 11 )
+#define PB12_PF_SD_CLK       ( GPIO_PORTB | GPIO_PF | 12 )
+#define PB12_AF_MS_SCLK0     ( GPIO_PORTB | GPIO_AF | 12 )
+#define PB13_PF_SD_CMD       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 )
+#define PB13_AF_MS_BS        ( GPIO_PORTB | GPIO_AF | 13 )
+#define PB14_AF_SSI_RXFS     ( GPIO_PORTB | GPIO_AF | 14 )
+#define PB15_AF_SSI_RXCLK    ( GPIO_PORTB | GPIO_AF | 15 )
+#define PB16_AF_SSI_RXDAT    ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 )
+#define PB17_AF_SSI_TXDAT    ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 )
+#define PB18_AF_SSI_TXFS     ( GPIO_PORTB | GPIO_AF | 18 )
+#define PB19_AF_SSI_TXCLK    ( GPIO_PORTB | GPIO_AF | 19 )
+#define PB20_PF_USBD_AFE     ( GPIO_PORTB | GPIO_PF | 20 )
+#define PB21_PF_USBD_OE      ( GPIO_PORTB | GPIO_PF | 21 )
+#define PB22_PFUSBD_RCV      ( GPIO_PORTB | GPIO_PF | 22 )
+#define PB23_PF_USBD_SUSPND  ( GPIO_PORTB | GPIO_PF | 23 )
+#define PB24_PF_USBD_VP      ( GPIO_PORTB | GPIO_PF | 24 )
+#define PB25_PF_USBD_VM      ( GPIO_PORTB | GPIO_PF | 25 )
+#define PB26_PF_USBD_VPO     ( GPIO_PORTB | GPIO_PF | 26 )
+#define PB27_PF_USBD_VMO     ( GPIO_PORTB | GPIO_PF | 27 )
+#define PB28_PF_UART2_CTS    ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 )
+#define PB29_PF_UART2_RTS    ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 )
+#define PB30_PF_UART2_TXD    ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 )
+#define PB31_PF_UART2_RXD    ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 )
+#define PC3_PF_SSI_RXFS      ( GPIO_PORTC | GPIO_PF | 3 )
+#define PC4_PF_SSI_RXCLK     ( GPIO_PORTC | GPIO_PF | 4 )
+#define PC5_PF_SSI_RXDAT     ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 )
+#define PC6_PF_SSI_TXDAT     ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 )
+#define PC7_PF_SSI_TXFS      ( GPIO_PORTC | GPIO_PF | 7 )
+#define PC8_PF_SSI_TXCLK     ( GPIO_PORTC | GPIO_PF | 8 )
+#define PC9_PF_UART1_CTS     ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 )
+#define PC10_PF_UART1_RTS    ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 )
+#define PC11_PF_UART1_TXD    ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 )
+#define PC12_PF_UART1_RXD    ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 )
+#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 )
+#define PC14_PF_SPI1_SCLK    ( GPIO_PORTC | GPIO_PF | 14 )
+#define PC15_PF_SPI1_SS      ( GPIO_PORTC | GPIO_PF | 15 )
+#define PC16_PF_SPI1_MISO    ( GPIO_PORTC | GPIO_PF | 16 )
+#define PC17_PF_SPI1_MOSI    ( GPIO_PORTC | GPIO_PF | 17 )
+#define PD6_PF_LSCLK         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 )
+#define PD7_PF_REV           ( GPIO_PORTD | GPIO_PF | 7 )
+#define PD7_AF_UART2_DTR     ( GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
+#define PD7_AIN_SPI2_SCLK    ( GPIO_PORTD | GPIO_AIN | 7 )
+#define PD8_PF_CLS           ( GPIO_PORTD | GPIO_PF | 8 )
+#define PD8_AF_UART2_DCD     ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 )
+#define PD8_AIN_SPI2_SS      ( GPIO_PORTD | GPIO_AIN | 8 )
+#define PD9_PF_PS            ( GPIO_PORTD | GPIO_PF | 9 )
+#define PD9_AF_UART2_RI      ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 )
+#define PD9_AOUT_SPI2_RXD    ( GPIO_PORTD | GPIO_IN | GPIO_AOUT | 9 )
+#define PD10_PF_SPL_SPR      ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 )
+#define PD10_AF_UART2_DSR    ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 )
+#define PD10_AIN_SPI2_TXD    ( GPIO_PORTD | GPIO_OUT | GPIO_AIN | 10 )
+#define PD11_PF_CONTRAST     ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 )
+#define PD12_PF_ACD_OE       ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 )
+#define PD13_PF_LP_HSYNC     ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 )
+#define PD14_PF_FLM_VSYNC    ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 )
+#define PD15_PF_LD0          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 )
+#define PD16_PF_LD1          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 )
+#define PD17_PF_LD2          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 )
+#define PD18_PF_LD3          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 )
+#define PD19_PF_LD4          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 )
+#define PD20_PF_LD5          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 )
+#define PD21_PF_LD6          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 )
+#define PD22_PF_LD7          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 )
+#define PD23_PF_LD8          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 )
+#define PD24_PF_LD9          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 )
+#define PD25_PF_LD10         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 )
+#define PD26_PF_LD11         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 )
+#define PD27_PF_LD12         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 )
+#define PD28_PF_LD13         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 )
+#define PD29_PF_LD14         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 )
+#define PD30_PF_LD15         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 )
+#define PD31_PF_TMR2OUT      ( GPIO_PORTD | GPIO_PF | 31 )
+#define PD31_BIN_SPI2_TXD    ( GPIO_PORTD | GPIO_BIN | 31 )
+
+/*
+ *  DMA Controller
+ */
+#define DCR     __REG(IMX_DMAC_BASE +0x00)	/* DMA Control Register */
+#define DISR    __REG(IMX_DMAC_BASE +0x04)	/* DMA Interrupt status Register */
+#define DIMR    __REG(IMX_DMAC_BASE +0x08)	/* DMA Interrupt mask Register */
+#define DBTOSR  __REG(IMX_DMAC_BASE +0x0c)	/* DMA Burst timeout status Register */
+#define DRTOSR  __REG(IMX_DMAC_BASE +0x10)	/* DMA Request timeout Register */
+#define DSESR   __REG(IMX_DMAC_BASE +0x14)	/* DMA Transfer Error Status Register */
+#define DBOSR   __REG(IMX_DMAC_BASE +0x18)	/* DMA Buffer overflow status Register */
+#define DBTOCR  __REG(IMX_DMAC_BASE +0x1c)	/* DMA Burst timeout control Register */
+#define WSRA    __REG(IMX_DMAC_BASE +0x40)	/* W-Size Register A */
+#define XSRA    __REG(IMX_DMAC_BASE +0x44)	/* X-Size Register A */
+#define YSRA    __REG(IMX_DMAC_BASE +0x48)	/* Y-Size Register A */
+#define WSRB    __REG(IMX_DMAC_BASE +0x4c)	/* W-Size Register B */
+#define XSRB    __REG(IMX_DMAC_BASE +0x50)	/* X-Size Register B */
+#define YSRB    __REG(IMX_DMAC_BASE +0x54)	/* Y-Size Register B */
+#define SAR(x)  __REG2( IMX_DMAC_BASE + 0x80, (x) << 6)	/* Source Address Registers */
+#define DAR(x)  __REG2( IMX_DMAC_BASE + 0x84, (x) << 6)	/* Destination Address Registers */
+#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6)	/* Count Registers */
+#define CCR(x)  __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6)	/* Control Registers */
+#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6)	/* Request source select Registers */
+#define BLR(x)  __REG2( IMX_DMAC_BASE + 0x94, (x) << 6)	/* Burst length Registers */
+#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6)	/* Request timeout Registers */
+#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6)	/* Bus Utilization Registers */
+
+#define DCR_DRST           (1<<1)
+#define DCR_DEN            (1<<0)
+#define DBTOCR_EN          (1<<15)
+#define DBTOCR_CNT(x)      ((x) & 0x7fff )
+#define CNTR_CNT(x)        ((x) & 0xffffff )
+#define CCR_DMOD_LINEAR    ( 0x0 << 12 )
+#define CCR_DMOD_2D        ( 0x1 << 12 )
+#define CCR_DMOD_FIFO      ( 0x2 << 12 )
+#define CCR_DMOD_EOBFIFO   ( 0x3 << 12 )
+#define CCR_SMOD_LINEAR    ( 0x0 << 10 )
+#define CCR_SMOD_2D        ( 0x1 << 10 )
+#define CCR_SMOD_FIFO      ( 0x2 << 10 )
+#define CCR_SMOD_EOBFIFO   ( 0x3 << 10 )
+#define CCR_MDIR_DEC       (1<<9)
+#define CCR_MSEL_B         (1<<8)
+#define CCR_DSIZ_32        ( 0x0 << 6 )
+#define CCR_DSIZ_8         ( 0x1 << 6 )
+#define CCR_DSIZ_16        ( 0x2 << 6 )
+#define CCR_SSIZ_32        ( 0x0 << 4 )
+#define CCR_SSIZ_8         ( 0x1 << 4 )
+#define CCR_SSIZ_16        ( 0x2 << 4 )
+#define CCR_REN            (1<<3)
+#define CCR_RPT            (1<<2)
+#define CCR_FRC            (1<<1)
+#define CCR_CEN            (1<<0)
+#define RTOR_EN            (1<<15)
+#define RTOR_CLK           (1<<14)
+#define RTOR_PSC           (1<<13)
+
+/*
+ *  Interrupt controller
+ */
+
+#define IMX_INTCNTL        __REG(IMX_AITC_BASE+0x00)
+#define INTCNTL_FIAD       (1<<19)
+#define INTCNTL_NIAD       (1<<20)
+
+#define IMX_NIMASK         __REG(IMX_AITC_BASE+0x04)
+#define IMX_INTENNUM       __REG(IMX_AITC_BASE+0x08)
+#define IMX_INTDISNUM      __REG(IMX_AITC_BASE+0x0c)
+#define IMX_INTENABLEH     __REG(IMX_AITC_BASE+0x10)
+#define IMX_INTENABLEL     __REG(IMX_AITC_BASE+0x14)
+
+/*
+ *  General purpose timers
+ */
+#define IMX_TCTL(x)        __REG( 0x00 + (x))
+#define TCTL_SWR           (1<<15)
+#define TCTL_FRR           (1<<8)
+#define TCTL_CAP_RIS       (1<<6)
+#define TCTL_CAP_FAL       (2<<6)
+#define TCTL_CAP_RIS_FAL   (3<<6)
+#define TCTL_OM            (1<<5)
+#define TCTL_IRQEN         (1<<4)
+#define TCTL_CLK_PCLK1     (1<<1)
+#define TCTL_CLK_PCLK1_16  (2<<1)
+#define TCTL_CLK_TIN       (3<<1)
+#define TCTL_CLK_32        (4<<1)
+#define TCTL_TEN           (1<<0)
+
+#define IMX_TPRER(x)       __REG( 0x04 + (x))
+#define IMX_TCMP(x)        __REG( 0x08 + (x))
+#define IMX_TCR(x)         __REG( 0x0C + (x))
+#define IMX_TCN(x)         __REG( 0x10 + (x))
+#define IMX_TSTAT(x)       __REG( 0x14 + (x))
+#define TSTAT_CAPT         (1<<1)
+#define TSTAT_COMP         (1<<0)
+
+/*
+ * LCD Controller
+ */
+
+#define LCDC_SSA	__REG(IMX_LCDC_BASE+0x00)
+
+#define LCDC_SIZE	__REG(IMX_LCDC_BASE+0x04)
+#define SIZE_XMAX(x)	((((x) >> 4) & 0x3f) << 20)
+#define SIZE_YMAX(y)    ( (y) & 0x1ff )
+
+#define LCDC_VPW	__REG(IMX_LCDC_BASE+0x08)
+#define VPW_VPW(x)	( (x) & 0x3ff )
+
+#define LCDC_CPOS	__REG(IMX_LCDC_BASE+0x0C)
+#define CPOS_CC1        (1<<31)
+#define CPOS_CC0        (1<<30)
+#define CPOS_OP         (1<<28)
+#define CPOS_CXP(x)     (((x) & 3ff) << 16)
+#define CPOS_CYP(y)     ((y) & 0x1ff)
+
+#define LCDC_LCWHB	__REG(IMX_LCDC_BASE+0x10)
+#define LCWHB_BK_EN     (1<<31)
+#define LCWHB_CW(w)     (((w) & 0x1f) << 24)
+#define LCWHB_CH(h)     (((h) & 0x1f) << 16)
+#define LCWHB_BD(x)     ((x) & 0xff)
+
+#define LCDC_LCHCC	__REG(IMX_LCDC_BASE+0x14)
+#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11)
+#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5)
+#define LCHCC_CUR_COL_B(b) ((b) & 0x1f)
+
+#define LCDC_PCR	__REG(IMX_LCDC_BASE+0x18)
+#define PCR_TFT         (1<<31)
+#define PCR_COLOR       (1<<30)
+#define PCR_PBSIZ_1     (0<<28)
+#define PCR_PBSIZ_2     (1<<28)
+#define PCR_PBSIZ_4     (2<<28)
+#define PCR_PBSIZ_8     (3<<28)
+#define PCR_BPIX_1      (0<<25)
+#define PCR_BPIX_2      (1<<25)
+#define PCR_BPIX_4      (2<<25)
+#define PCR_BPIX_8      (3<<25)
+#define PCR_BPIX_12     (4<<25)
+#define PCR_BPIX_16     (4<<25)
+#define PCR_PIXPOL      (1<<24)
+#define PCR_FLMPOL      (1<<23)
+#define PCR_LPPOL       (1<<22)
+#define PCR_CLKPOL      (1<<21)
+#define PCR_OEPOL       (1<<20)
+#define PCR_SCLKIDLE    (1<<19)
+#define PCR_END_SEL     (1<<18)
+#define PCR_END_BYTE_SWAP (1<<17)
+#define PCR_REV_VS      (1<<16)
+#define PCR_ACD_SEL     (1<<15)
+#define PCR_ACD(x)      (((x) & 0x7f) << 8)
+#define PCR_SCLK_SEL    (1<<7)
+#define PCR_SHARP       (1<<6)
+#define PCR_PCD(x)      ((x) & 0x3f)
+
+#define LCDC_HCR	__REG(IMX_LCDC_BASE+0x1C)
+#define HCR_H_WIDTH(x)  (((x) & 0x3f) << 26)
+#define HCR_H_WAIT_1(x) (((x) & 0xff) << 8)
+#define HCR_H_WAIT_2(x) ((x) & 0xff)
+
+#define LCDC_VCR	__REG(IMX_LCDC_BASE+0x20)
+#define VCR_V_WIDTH(x)  (((x) & 0x3f) << 26)
+#define VCR_V_WAIT_1(x) (((x) & 0xff) << 8)
+#define VCR_V_WAIT_2(x) ((x) & 0xff)
+
+#define LCDC_POS	__REG(IMX_LCDC_BASE+0x24)
+#define POS_POS(x)      ((x) & 1f)
+
+#define LCDC_LSCR1	__REG(IMX_LCDC_BASE+0x28)
+#define LSCR1_PS_RISE_DELAY(x)    (((x) & 0x7f) << 26)
+#define LSCR1_CLS_RISE_DELAY(x)   (((x) & 0x3f) << 16)
+#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8)
+#define LSCR1_GRAY2(x)            (((x) & 0xf) << 4)
+#define LSCR1_GRAY1(x)            (((x) & 0xf))
+
+#define LCDC_PWMR	__REG(IMX_LCDC_BASE+0x2C)
+#define PWMR_CLS(x)     (((x) & 0x1ff) << 16)
+#define PWMR_LDMSK      (1<<15)
+#define PWMR_SCR1       (1<<10)
+#define PWMR_SCR0       (1<<9)
+#define PWMR_CC_EN      (1<<8)
+#define PWMR_PW(x)      ((x) & 0xff)
+
+#define LCDC_DMACR	__REG(IMX_LCDC_BASE+0x30)
+#define DMACR_BURST     (1<<31)
+#define DMACR_HM(x)     (((x) & 0xf) << 16)
+#define DMACR_TM(x)     ((x) &0xf)
+
+#define LCDC_RMCR	__REG(IMX_LCDC_BASE+0x34)
+#define RMCR_LCDC_EN		(1<<1)
+#define RMCR_SELF_REF		(1<<0)
+
+#define LCDC_LCDICR	__REG(IMX_LCDC_BASE+0x38)
+#define LCDICR_INT_SYN  (1<<2)
+#define LCDICR_INT_CON  (1)
+
+#define LCDC_LCDISR	__REG(IMX_LCDC_BASE+0x40)
+#define LCDISR_UDR_ERR (1<<3)
+#define LCDISR_ERR_RES (1<<2)
+#define LCDISR_EOF     (1<<1)
+#define LCDISR_BOF     (1<<0)
+
+/*
+ *  UART Module. Takes the UART base address as argument
+ */
+#define URXD0(x) __REG( 0x0 + (x)) /* Receiver Register */
+#define URTX0(x) __REG( 0x40 + (x)) /* Transmitter Register */
+#define UCR1(x)  __REG( 0x80 + (x)) /* Control Register 1 */
+#define UCR2(x)  __REG( 0x84 + (x)) /* Control Register 2 */
+#define UCR3(x)  __REG( 0x88 + (x)) /* Control Register 3 */
+#define UCR4(x)  __REG( 0x8c + (x)) /* Control Register 4 */
+#define UFCR(x)  __REG( 0x90 + (x)) /* FIFO Control Register */
+#define USR1(x)  __REG( 0x94 + (x)) /* Status Register 1 */
+#define USR2(x)  __REG( 0x98 + (x)) /* Status Register 2 */
+#define UESC(x)  __REG( 0x9c + (x)) /* Escape Character Register */
+#define UTIM(x)  __REG( 0xa0 + (x)) /* Escape Timer Register */
+#define UBIR(x)  __REG( 0xa4 + (x)) /* BRM Incremental Register */
+#define UBMR(x)  __REG( 0xa8 + (x)) /* BRM Modulator Register */
+#define UBRC(x)  __REG( 0xac + (x)) /* Baud Rate Count Register */
+#define BIPR1(x) __REG( 0xb0 + (x)) /* Incremental Preset Register 1 */
+#define BIPR2(x) __REG( 0xb4 + (x)) /* Incremental Preset Register 2 */
+#define BIPR3(x) __REG( 0xb8 + (x)) /* Incremental Preset Register 3 */
+#define BIPR4(x) __REG( 0xbc + (x)) /* Incremental Preset Register 4 */
+#define BMPR1(x) __REG( 0xc0 + (x)) /* BRM Modulator Register 1 */
+#define BMPR2(x) __REG( 0xc4 + (x)) /* BRM Modulator Register 2 */
+#define BMPR3(x) __REG( 0xc8 + (x)) /* BRM Modulator Register 3 */
+#define BMPR4(x) __REG( 0xcc + (x)) /* BRM Modulator Register 4 */
+#define UTS(x)   __REG( 0xd0 + (x)) /* UART Test Register */
+
+/* UART Control Register Bit Fields.*/
+#define  URXD_CHARRDY    (1<<15)
+#define  URXD_ERR        (1<<14)
+#define  URXD_OVRRUN     (1<<13)
+#define  URXD_FRMERR     (1<<12)
+#define  URXD_BRK        (1<<11)
+#define  URXD_PRERR      (1<<10)
+#define  UCR1_ADEN       (1<<15) /* Auto dectect interrupt */
+#define  UCR1_ADBR       (1<<14) /* Auto detect baud rate */
+#define  UCR1_TRDYEN     (1<<13) /* Transmitter ready interrupt enable */
+#define  UCR1_IDEN       (1<<12) /* Idle condition interrupt */
+#define  UCR1_RRDYEN     (1<<9)	 /* Recv ready interrupt enable */
+#define  UCR1_RDMAEN     (1<<8)	 /* Recv ready DMA enable */
+#define  UCR1_IREN       (1<<7)	 /* Infrared interface enable */
+#define  UCR1_TXMPTYEN   (1<<6)	 /* Transimitter empty interrupt enable */
+#define  UCR1_RTSDEN     (1<<5)	 /* RTS delta interrupt enable */
+#define  UCR1_SNDBRK     (1<<4)	 /* Send break */
+#define  UCR1_TDMAEN     (1<<3)	 /* Transmitter ready DMA enable */
+#define  UCR1_UARTCLKEN  (1<<2)	 /* UART clock enabled */
+#define  UCR1_DOZE       (1<<1)	 /* Doze */
+#define  UCR1_UARTEN     (1<<0)	 /* UART enabled */
+#define  UCR2_ESCI     	 (1<<15) /* Escape seq interrupt enable */
+#define  UCR2_IRTS  	 (1<<14) /* Ignore RTS pin */
+#define  UCR2_CTSC  	 (1<<13) /* CTS pin control */
+#define  UCR2_CTS        (1<<12) /* Clear to send */
+#define  UCR2_ESCEN      (1<<11) /* Escape enable */
+#define  UCR2_PREN       (1<<8)  /* Parity enable */
+#define  UCR2_PROE       (1<<7)  /* Parity odd/even */
+#define  UCR2_STPB       (1<<6)	 /* Stop */
+#define  UCR2_WS         (1<<5)	 /* Word size */
+#define  UCR2_RTSEN      (1<<4)	 /* Request to send interrupt enable */
+#define  UCR2_TXEN       (1<<2)	 /* Transmitter enabled */
+#define  UCR2_RXEN       (1<<1)	 /* Receiver enabled */
+#define  UCR2_SRST 	 (1<<0)	 /* SW reset */
+#define  UCR3_DTREN 	 (1<<13) /* DTR interrupt enable */
+#define  UCR3_PARERREN   (1<<12) /* Parity enable */
+#define  UCR3_FRAERREN   (1<<11) /* Frame error interrupt enable */
+#define  UCR3_DSR        (1<<10) /* Data set ready */
+#define  UCR3_DCD        (1<<9)  /* Data carrier detect */
+#define  UCR3_RI         (1<<8)  /* Ring indicator */
+#define  UCR3_TIMEOUTEN  (1<<7)  /* Timeout interrupt enable */
+#define  UCR3_RXDSEN	 (1<<6)  /* Receive status interrupt enable */
+#define  UCR3_AIRINTEN   (1<<5)  /* Async IR wake interrupt enable */
+#define  UCR3_AWAKEN	 (1<<4)  /* Async wake interrupt enable */
+#define  UCR3_REF25 	 (1<<3)  /* Ref freq 25 MHz */
+#define  UCR3_REF30 	 (1<<2)  /* Ref Freq 30 MHz */
+#define  UCR3_INVT  	 (1<<1)  /* Inverted Infrared transmission */
+#define  UCR3_BPEN  	 (1<<0)  /* Preset registers enable */
+#define  UCR4_CTSTL_32   (32<<10) /* CTS trigger level (32 chars) */
+#define  UCR4_INVR  	 (1<<9)  /* Inverted infrared reception */
+#define  UCR4_ENIRI 	 (1<<8)  /* Serial infrared interrupt enable */
+#define  UCR4_WKEN  	 (1<<7)  /* Wake interrupt enable */
+#define  UCR4_REF16 	 (1<<6)  /* Ref freq 16 MHz */
+#define  UCR4_IRSC  	 (1<<5)  /* IR special case */
+#define  UCR4_TCEN  	 (1<<3)  /* Transmit complete interrupt enable */
+#define  UCR4_BKEN  	 (1<<2)  /* Break condition interrupt enable */
+#define  UCR4_OREN  	 (1<<1)  /* Receiver overrun interrupt enable */
+#define  UCR4_DREN  	 (1<<0)  /* Recv data ready interrupt enable */
+#define  UFCR_RXTL_SHF   0       /* Receiver trigger level shift */
+#define  UFCR_RFDIV      (7<<7)  /* Reference freq divider mask */
+#define  UFCR_TXTL_SHF   10      /* Transmitter trigger level shift */
+#define  USR1_PARITYERR  (1<<15) /* Parity error interrupt flag */
+#define  USR1_RTSS  	 (1<<14) /* RTS pin status */
+#define  USR1_TRDY  	 (1<<13) /* Transmitter ready interrupt/dma flag */
+#define  USR1_RTSD  	 (1<<12) /* RTS delta */
+#define  USR1_ESCF  	 (1<<11) /* Escape seq interrupt flag */
+#define  USR1_FRAMERR    (1<<10) /* Frame error interrupt flag */
+#define  USR1_RRDY       (1<<9)	 /* Receiver ready interrupt/dma flag */
+#define  USR1_TIMEOUT    (1<<7)	 /* Receive timeout interrupt status */
+#define  USR1_RXDS  	 (1<<6)	 /* Receiver idle interrupt flag */
+#define  USR1_AIRINT	 (1<<5)	 /* Async IR wake interrupt flag */
+#define  USR1_AWAKE 	 (1<<4)	 /* Aysnc wake interrupt flag */
+#define  USR2_ADET  	 (1<<15) /* Auto baud rate detect complete */
+#define  USR2_TXFE  	 (1<<14) /* Transmit buffer FIFO empty */
+#define  USR2_DTRF  	 (1<<13) /* DTR edge interrupt flag */
+#define  USR2_IDLE  	 (1<<12) /* Idle condition */
+#define  USR2_IRINT 	 (1<<8)	 /* Serial infrared interrupt flag */
+#define  USR2_WAKE  	 (1<<7)	 /* Wake */
+#define  USR2_RTSF  	 (1<<4)	 /* RTS edge interrupt flag */
+#define  USR2_TXDC  	 (1<<3)	 /* Transmitter complete */
+#define  USR2_BRCD  	 (1<<2)	 /* Break condition */
+#define  USR2_ORE        (1<<1)	 /* Overrun error */
+#define  USR2_RDR        (1<<0)	 /* Recv data ready */
+#define  UTS_FRCPERR	 (1<<13) /* Force parity error */
+#define  UTS_LOOP        (1<<12) /* Loop tx and rx */
+#define  UTS_TXEMPTY	 (1<<6)	 /* TxFIFO empty */
+#define  UTS_RXEMPTY	 (1<<5)	 /* RxFIFO empty */
+#define  UTS_TXFULL 	 (1<<4)	 /* TxFIFO full */
+#define  UTS_RXFULL 	 (1<<3)	 /* RxFIFO full */
+#define  UTS_SOFTRST	 (1<<0)	 /* Software reset */
+
+#endif				// _IMX_REGS_H
diff --git a/include/asm-arm/arch-imx/io.h b/include/asm-arm/arch-imx/io.h
new file mode 100644
index 00000000000..28a4cca6a4c
--- /dev/null
+++ b/include/asm-arm/arch-imx/io.h
@@ -0,0 +1,28 @@
+/*
+ *  linux/include/asm-arm/arch-imxads/io.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)		((void __iomem *)(a))
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/include/asm-arm/arch-imx/irq.h b/include/asm-arm/arch-imx/irq.h
new file mode 100644
index 00000000000..545e065d232
--- /dev/null
+++ b/include/asm-arm/arch-imx/irq.h
@@ -0,0 +1,20 @@
+/*
+ *  linux/include/asm-arm/arch-imxads/irq.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define fixup_irq(i)	(i)
diff --git a/include/asm-arm/arch-imx/irqs.h b/include/asm-arm/arch-imx/irqs.h
new file mode 100644
index 00000000000..238197cfb9d
--- /dev/null
+++ b/include/asm-arm/arch-imx/irqs.h
@@ -0,0 +1,116 @@
+/*
+ *  linux/include/asm-arm/arch-imxads/irqs.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ARM_IRQS_H__
+#define __ARM_IRQS_H__
+
+/* Use the imx definitions */
+#include <asm/arch/hardware.h>
+
+/*
+ *  IMX Interrupt numbers
+ *
+ */
+#define INT_SOFTINT                 0
+#define CSI_INT                     6
+#define DSPA_MAC_INT                7
+#define DSPA_INT                    8
+#define COMP_INT                    9
+#define MSHC_XINT                   10
+#define GPIO_INT_PORTA              11
+#define GPIO_INT_PORTB              12
+#define GPIO_INT_PORTC              13
+#define LCDC_INT                    14
+#define SIM_INT                     15
+#define SIM_DATA_INT                16
+#define RTC_INT                     17
+#define RTC_SAMINT                  18
+#define UART2_MINT_PFERR            19
+#define UART2_MINT_RTS              20
+#define UART2_MINT_DTR              21
+#define UART2_MINT_UARTC            22
+#define UART2_MINT_TX               23
+#define UART2_MINT_RX               24
+#define UART1_MINT_PFERR            25
+#define UART1_MINT_RTS              26
+#define UART1_MINT_DTR              27
+#define UART1_MINT_UARTC            28
+#define UART1_MINT_TX               29
+#define UART1_MINT_RX               30
+#define VOICE_DAC_INT               31
+#define VOICE_ADC_INT               32
+#define PEN_DATA_INT                33
+#define PWM_INT                     34
+#define SDHC_INT                    35
+#define I2C_INT                     39
+#define CSPI_INT                    41
+#define SSI_TX_INT                  42
+#define SSI_TX_ERR_INT              43
+#define SSI_RX_INT                  44
+#define SSI_RX_ERR_INT              45
+#define TOUCH_INT                   46
+#define USBD_INT0                   47
+#define USBD_INT1                   48
+#define USBD_INT2                   49
+#define USBD_INT3                   50
+#define USBD_INT4                   51
+#define USBD_INT5                   52
+#define USBD_INT6                   53
+#define BTSYS_INT                   55
+#define BTTIM_INT                   56
+#define BTWUI_INT                   57
+#define TIM2_INT                    58
+#define TIM1_INT                    59
+#define DMA_ERR                     60
+#define DMA_INT                     61
+#define GPIO_INT_PORTD              62
+
+#define IMX_IRQS                         (64)
+
+/* note: the IMX has four gpio ports (A-D), but only
+ *       the following pins are connected to the outside
+ *       world:
+ *
+ * PORT A: bits 0-31
+ * PORT B: bits 8-31
+ * PORT C: bits 3-17
+ * PORT D: bits 6-31
+ *
+ * We map these interrupts straight on. As a result we have
+ * several holes in the interrupt mapping. We do this for two
+ * reasons:
+ *   - mapping the interrupts without holes would get
+ *     far more complicated
+ *   - Motorola could well decide to bring some processor
+ *     with more pins connected
+ */
+
+#define IRQ_GPIOA(x)  (IMX_IRQS + x)
+#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
+#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
+#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
+
+/* decode irq number to use with IMR(x), ISR(x) and friends */
+#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
+
+#define NR_IRQS (IRQ_GPIOD(32) + 1)
+#define IRQ_GPIO(x)
+#endif
diff --git a/include/asm-arm/arch-imx/memory.h b/include/asm-arm/arch-imx/memory.h
new file mode 100644
index 00000000000..116a91fa14f
--- /dev/null
+++ b/include/asm-arm/arch-imx/memory.h
@@ -0,0 +1,38 @@
+/*
+ *  linux/include/asm-arm/arch-imx/memory.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MMU_H
+#define __ASM_ARCH_MMU_H
+
+#define PHYS_OFFSET	(0x08000000UL)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus__is_a_macro
+#define __virt_to_bus(x)	(x - PAGE_OFFSET +  PHYS_OFFSET)
+#define __bus_to_virt__is_a_macro
+#define __bus_to_virt(x)	(x -  PHYS_OFFSET + PAGE_OFFSET)
+
+#endif
diff --git a/include/asm-arm/arch-imx/mx1ads.h b/include/asm-arm/arch-imx/mx1ads.h
new file mode 100644
index 00000000000..d90fa4b49ce
--- /dev/null
+++ b/include/asm-arm/arch-imx/mx1ads.h
@@ -0,0 +1,36 @@
+/*
+ * linux/include/asm-arm/arch-imx/mx1ads.h
+ *
+ * Copyright (C) 2004 Robert Schwebel, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef __ASM_ARCH_MX1ADS_H
+#define __ASM_ARCH_MX1ADS_H
+
+/* ------------------------------------------------------------------------ */
+/* Memory Map for the M9328MX1ADS (MX1ADS) Board                            */
+/* ------------------------------------------------------------------------ */
+
+#define MX1ADS_FLASH_PHYS		0x10000000
+#define MX1ADS_FLASH_SIZE		(16*1024*1024)
+
+#define IMX_FB_PHYS			(0x0C000000 - 0x40000)
+
+#define CLK32 32000
+
+#endif /* __ASM_ARCH_MX1ADS_H */
diff --git a/include/asm-arm/arch-imx/param.h b/include/asm-arm/arch-imx/param.h
new file mode 100644
index 00000000000..7c724f03333
--- /dev/null
+++ b/include/asm-arm/arch-imx/param.h
@@ -0,0 +1,19 @@
+/*
+ *  linux/include/asm-arm/arch-imx/param.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/include/asm-arm/arch-imx/system.h b/include/asm-arm/arch-imx/system.h
new file mode 100644
index 00000000000..c645fe9afb9
--- /dev/null
+++ b/include/asm-arm/arch-imx/system.h
@@ -0,0 +1,40 @@
+/*
+ *  linux/include/asm-arm/arch-imxads/system.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static void
+arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void
+arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+
+#endif
diff --git a/include/asm-arm/arch-imx/timex.h b/include/asm-arm/arch-imx/timex.h
new file mode 100644
index 00000000000..d65ab3cd5d5
--- /dev/null
+++ b/include/asm-arm/arch-imx/timex.h
@@ -0,0 +1,27 @@
+/*
+ *  linux/include/asm-arm/imx/timex.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#include <asm/arch/hardware.h>
+#define CLOCK_TICK_RATE		(CLK32)
+
+#endif
diff --git a/include/asm-arm/arch-imx/uncompress.h b/include/asm-arm/arch-imx/uncompress.h
new file mode 100644
index 00000000000..096077f2750
--- /dev/null
+++ b/include/asm-arm/arch-imx/uncompress.h
@@ -0,0 +1,78 @@
+/*
+ *  linux/include/asm-arm/arch-imxads/uncompress.h
+ *
+ *
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+
+#define UART1_BASE 0x206000
+#define UART2_BASE 0x207000
+#define USR2 0x98
+#define USR2_TXFE (1<<14)
+#define TXR  0x40
+#define UCR1 0x80
+#define UCR1_UARTEN 1
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  We search for the first enabled
+ * port in the most probable order.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+static void
+putstr(const char *s)
+{
+	unsigned long serial_port;
+
+	do {
+		serial_port = UART1_BASE;
+		if ( UART(UCR1) & UCR1_UARTEN )
+			break;
+		serial_port = UART2_BASE;
+		if ( UART(UCR1) & UCR1_UARTEN )
+			break;
+		return;
+	} while(0);
+
+	while (*s) {
+		while ( !(UART(USR2) & USR2_TXFE) )
+			barrier();
+
+		UART(TXR) = *s;
+
+		if (*s == '\n') {
+			while ( !(UART(USR2) & USR2_TXFE) )
+				barrier();
+
+			UART(TXR) = '\r';
+		}
+		s++;
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-imx/vmalloc.h b/include/asm-arm/arch-imx/vmalloc.h
new file mode 100644
index 00000000000..252038f4816
--- /dev/null
+++ b/include/asm-arm/arch-imx/vmalloc.h
@@ -0,0 +1,32 @@
+/*
+ *  linux/include/asm-arm/arch-imx/vmalloc.h
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET	  (8*1024*1024)
+#define VMALLOC_START	  (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)