xfs: kill xfs_itruncate_start

xfs_itruncate_start is a rather length wrapper that evaluates to a call
to xfs_ioend_wait and xfs_tosspages, and only has two callers.

Instead of using the complicated checks left over from IRIX where we
can to truncate the pagecache just call xfs_tosspages
(aka truncate_inode_pages) directly as we want to get rid of all data
after i_size, and truncate_inode_pages handles incorrect alignments
and too large offsets just fine.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>

1 files changed, 3 insertions, 160 deletions

diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index a098a20ca63..82a282ab63d 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -1217,165 +1217,8 @@ xfs_isize_check(
 #endif	/* DEBUG */
 
 /*
- * Calculate the last possible buffered byte in a file.  This must
- * include data that was buffered beyond the EOF by the write code.
- * This also needs to deal with overflowing the xfs_fsize_t type
- * which can happen for sizes near the limit.
- *
- * We also need to take into account any blocks beyond the EOF.  It
- * may be the case that they were buffered by a write which failed.
- * In that case the pages will still be in memory, but the inode size
- * will never have been updated.
- */
-STATIC xfs_fsize_t
-xfs_file_last_byte(
-	xfs_inode_t	*ip)
-{
-	xfs_mount_t	*mp;
-	xfs_fsize_t	last_byte;
-	xfs_fileoff_t	last_block;
-	xfs_fileoff_t	size_last_block;
-	int		error;
-
-	ASSERT(xfs_isilocked(ip, XFS_IOLOCK_EXCL|XFS_IOLOCK_SHARED));
-
-	mp = ip->i_mount;
-	/*
-	 * Only check for blocks beyond the EOF if the extents have
-	 * been read in.  This eliminates the need for the inode lock,
-	 * and it also saves us from looking when it really isn't
-	 * necessary.
-	 */
-	if (ip->i_df.if_flags & XFS_IFEXTENTS) {
-		xfs_ilock(ip, XFS_ILOCK_SHARED);
-		error = xfs_bmap_last_offset(NULL, ip, &last_block,
-			XFS_DATA_FORK);
-		xfs_iunlock(ip, XFS_ILOCK_SHARED);
-		if (error) {
-			last_block = 0;
-		}
-	} else {
-		last_block = 0;
-	}
-	size_last_block = XFS_B_TO_FSB(mp, (xfs_ufsize_t)ip->i_size);
-	last_block = XFS_FILEOFF_MAX(last_block, size_last_block);
-
-	last_byte = XFS_FSB_TO_B(mp, last_block);
-	if (last_byte < 0) {
-		return XFS_MAXIOFFSET(mp);
-	}
-	last_byte += (1 << mp->m_writeio_log);
-	if (last_byte < 0) {
-		return XFS_MAXIOFFSET(mp);
-	}
-	return last_byte;
-}
-
-/*
- * Start the truncation of the file to new_size.  The new size
- * must be smaller than the current size.  This routine will
- * clear the buffer and page caches of file data in the removed
- * range, and xfs_itruncate_finish() will remove the underlying
- * disk blocks.
- *
- * The inode must have its I/O lock locked EXCLUSIVELY, and it
- * must NOT have the inode lock held at all.  This is because we're
- * calling into the buffer/page cache code and we can't hold the
- * inode lock when we do so.
- *
- * We need to wait for any direct I/Os in flight to complete before we
- * proceed with the truncate. This is needed to prevent the extents
- * being read or written by the direct I/Os from being removed while the
- * I/O is in flight as there is no other method of synchronising
- * direct I/O with the truncate operation.  Also, because we hold
- * the IOLOCK in exclusive mode, we prevent new direct I/Os from being
- * started until the truncate completes and drops the lock. Essentially,
- * the xfs_ioend_wait() call forms an I/O barrier that provides strict
- * ordering between direct I/Os and the truncate operation.
- *
- * The flags parameter can have either the value XFS_ITRUNC_DEFINITE
- * or XFS_ITRUNC_MAYBE.  The XFS_ITRUNC_MAYBE value should be used
- * in the case that the caller is locking things out of order and
- * may not be able to call xfs_itruncate_finish() with the inode lock
- * held without dropping the I/O lock.  If the caller must drop the
- * I/O lock before calling xfs_itruncate_finish(), then xfs_itruncate_start()
- * must be called again with all the same restrictions as the initial
- * call.
- */
-int
-xfs_itruncate_start(
-	xfs_inode_t	*ip,
-	uint		flags,
-	xfs_fsize_t	new_size)
-{
-	xfs_fsize_t	last_byte;
-	xfs_off_t	toss_start;
-	xfs_mount_t	*mp;
-	int		error = 0;
-
-	ASSERT(xfs_isilocked(ip, XFS_IOLOCK_EXCL));
-	ASSERT((new_size == 0) || (new_size <= ip->i_size));
-	ASSERT((flags == XFS_ITRUNC_DEFINITE) ||
-	       (flags == XFS_ITRUNC_MAYBE));
-
-	mp = ip->i_mount;
-
-	/* wait for the completion of any pending DIOs */
-	if (new_size == 0 || new_size < ip->i_size)
-		xfs_ioend_wait(ip);
-
-	/*
-	 * Call toss_pages or flushinval_pages to get rid of pages
-	 * overlapping the region being removed.  We have to use
-	 * the less efficient flushinval_pages in the case that the
-	 * caller may not be able to finish the truncate without
-	 * dropping the inode's I/O lock.  Make sure
-	 * to catch any pages brought in by buffers overlapping
-	 * the EOF by searching out beyond the isize by our
-	 * block size. We round new_size up to a block boundary
-	 * so that we don't toss things on the same block as
-	 * new_size but before it.
-	 *
-	 * Before calling toss_page or flushinval_pages, make sure to
-	 * call remapf() over the same region if the file is mapped.
-	 * This frees up mapped file references to the pages in the
-	 * given range and for the flushinval_pages case it ensures
-	 * that we get the latest mapped changes flushed out.
-	 */
-	toss_start = XFS_B_TO_FSB(mp, (xfs_ufsize_t)new_size);
-	toss_start = XFS_FSB_TO_B(mp, toss_start);
-	if (toss_start < 0) {
-		/*
-		 * The place to start tossing is beyond our maximum
-		 * file size, so there is no way that the data extended
-		 * out there.
-		 */
-		return 0;
-	}
-	last_byte = xfs_file_last_byte(ip);
-	trace_xfs_itruncate_start(ip, new_size, flags, toss_start, last_byte);
-	if (last_byte > toss_start) {
-		if (flags & XFS_ITRUNC_DEFINITE) {
-			xfs_tosspages(ip, toss_start,
-					-1, FI_REMAPF_LOCKED);
-		} else {
-			error = xfs_flushinval_pages(ip, toss_start,
-					-1, FI_REMAPF_LOCKED);
-		}
-	}
-
-#ifdef DEBUG
-	if (new_size == 0) {
-		ASSERT(VN_CACHED(VFS_I(ip)) == 0);
-	}
-#endif
-	return error;
-}
-
-/*
- * Shrink the file to the given new_size.  The new size must be smaller than
- * the current size.  This will free up the underlying blocks in the removed
- * range after a call to xfs_itruncate_start() or xfs_atruncate_start().
+ * Free up the underlying blocks past new_size.  The new size must be
+ * smaller than the current size.
  *
  * The transaction passed to this routine must have made a permanent log
  * reservation of at least XFS_ITRUNCATE_LOG_RES.  This routine may commit the
@@ -1387,7 +1230,7 @@ xfs_itruncate_start(
  * will be "held" within the returned transaction.  This routine does NOT
  * require any disk space to be reserved for it within the transaction.
  *
- * The fork parameter must be either xfs_attr_fork or xfs_data_fork, and it
+ * The fork parameter must be either XFS_ATTR_FORK or XFS_DATA_FORK, and it
  * indicates the fork which is to be truncated.  For the attribute fork we only
  * support truncation to size 0.
  *