Merge commit 'v2.6.34-rc1' into perf/urgent

Conflicts:
	tools/perf/util/probe-event.c

Merge reason: Pick up -rc1 and resolve the conflict as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 629 insertions, 0 deletions

diff --git a/fs/logfs/logfs_abi.h b/fs/logfs/logfs_abi.h
new file mode 100644
index 00000000000..f674725663f
--- /dev/null
+++ b/fs/logfs/logfs_abi.h
@@ -0,0 +1,629 @@
+/*
+ * fs/logfs/logfs_abi.h
+ *
+ * As should be obvious for Linux kernel code, license is GPLv2
+ *
+ * Copyright (c) 2005-2008 Joern Engel <joern@logfs.org>
+ *
+ * Public header for logfs.
+ */
+#ifndef FS_LOGFS_LOGFS_ABI_H
+#define FS_LOGFS_LOGFS_ABI_H
+
+/* For out-of-kernel compiles */
+#ifndef BUILD_BUG_ON
+#define BUILD_BUG_ON(condition) /**/
+#endif
+
+#define SIZE_CHECK(type, size)					\
+static inline void check_##type(void)				\
+{								\
+	BUILD_BUG_ON(sizeof(struct type) != (size));		\
+}
+
+/*
+ * Throughout the logfs code, we're constantly dealing with blocks at
+ * various positions or offsets.  To remove confusion, we stricly
+ * distinguish between a "position" - the logical position within a
+ * file and an "offset" - the physical location within the device.
+ *
+ * Any usage of the term offset for a logical location or position for
+ * a physical one is a bug and should get fixed.
+ */
+
+/*
+ * Block are allocated in one of several segments depending on their
+ * level.  The following levels are used:
+ *  0	- regular data block
+ *  1	- i1 indirect blocks
+ *  2	- i2 indirect blocks
+ *  3	- i3 indirect blocks
+ *  4	- i4 indirect blocks
+ *  5	- i5 indirect blocks
+ *  6	- ifile data blocks
+ *  7	- ifile i1 indirect blocks
+ *  8	- ifile i2 indirect blocks
+ *  9	- ifile i3 indirect blocks
+ * 10	- ifile i4 indirect blocks
+ * 11	- ifile i5 indirect blocks
+ * Potential levels to be used in the future:
+ * 12	- gc recycled blocks, long-lived data
+ * 13	- replacement blocks, short-lived data
+ *
+ * Levels 1-11 are necessary for robust gc operations and help seperate
+ * short-lived metadata from longer-lived file data.  In the future,
+ * file data should get seperated into several segments based on simple
+ * heuristics.  Old data recycled during gc operation is expected to be
+ * long-lived.  New data is of uncertain life expectancy.  New data
+ * used to replace older blocks in existing files is expected to be
+ * short-lived.
+ */
+
+
+/* Magic numbers.  64bit for superblock, 32bit for statfs f_type */
+#define LOGFS_MAGIC		0x7a3a8e5cb9d5bf67ull
+#define LOGFS_MAGIC_U32		0xc97e8168u
+
+/*
+ * Various blocksize related macros.  Blocksize is currently fixed at 4KiB.
+ * Sooner or later that should become configurable and the macros replaced
+ * by something superblock-dependent.  Pointers in indirect blocks are and
+ * will remain 64bit.
+ *
+ * LOGFS_BLOCKSIZE	- self-explaining
+ * LOGFS_BLOCK_FACTOR	- number of pointers per indirect block
+ * LOGFS_BLOCK_BITS	- log2 of LOGFS_BLOCK_FACTOR, used for shifts
+ */
+#define LOGFS_BLOCKSIZE		(4096ull)
+#define LOGFS_BLOCK_FACTOR	(LOGFS_BLOCKSIZE / sizeof(u64))
+#define LOGFS_BLOCK_BITS	(9)
+
+/*
+ * Number of blocks at various levels of indirection.  There are 16 direct
+ * block pointers plus a single indirect pointer.
+ */
+#define I0_BLOCKS		(16)
+#define I1_BLOCKS		LOGFS_BLOCK_FACTOR
+#define I2_BLOCKS		(LOGFS_BLOCK_FACTOR * I1_BLOCKS)
+#define I3_BLOCKS		(LOGFS_BLOCK_FACTOR * I2_BLOCKS)
+#define I4_BLOCKS		(LOGFS_BLOCK_FACTOR * I3_BLOCKS)
+#define I5_BLOCKS		(LOGFS_BLOCK_FACTOR * I4_BLOCKS)
+
+#define INDIRECT_INDEX		I0_BLOCKS
+#define LOGFS_EMBEDDED_FIELDS	(I0_BLOCKS + 1)
+
+/*
+ * Sizes at which files require another level of indirection.  Files smaller
+ * than LOGFS_EMBEDDED_SIZE can be completely stored in the inode itself,
+ * similar like ext2 fast symlinks.
+ *
+ * Data at a position smaller than LOGFS_I0_SIZE is accessed through the
+ * direct pointers, else through the 1x indirect pointer and so forth.
+ */
+#define LOGFS_EMBEDDED_SIZE	(LOGFS_EMBEDDED_FIELDS * sizeof(u64))
+#define LOGFS_I0_SIZE		(I0_BLOCKS * LOGFS_BLOCKSIZE)
+#define LOGFS_I1_SIZE		(I1_BLOCKS * LOGFS_BLOCKSIZE)
+#define LOGFS_I2_SIZE		(I2_BLOCKS * LOGFS_BLOCKSIZE)
+#define LOGFS_I3_SIZE		(I3_BLOCKS * LOGFS_BLOCKSIZE)
+#define LOGFS_I4_SIZE		(I4_BLOCKS * LOGFS_BLOCKSIZE)
+#define LOGFS_I5_SIZE		(I5_BLOCKS * LOGFS_BLOCKSIZE)
+
+/*
+ * Each indirect block pointer must have this flag set, if all block pointers
+ * behind it are set, i.e. there is no hole hidden in the shadow of this
+ * indirect block pointer.
+ */
+#define LOGFS_FULLY_POPULATED (1ULL << 63)
+#define pure_ofs(ofs) (ofs & ~LOGFS_FULLY_POPULATED)
+
+/*
+ * LogFS needs to seperate data into levels.  Each level is defined as the
+ * maximal possible distance from the master inode (inode of the inode file).
+ * Data blocks reside on level 0, 1x indirect block on level 1, etc.
+ * Inodes reside on level 6, indirect blocks for the inode file on levels 7-11.
+ * This effort is necessary to guarantee garbage collection to always make
+ * progress.
+ *
+ * LOGFS_MAX_INDIRECT is the maximal indirection through indirect blocks,
+ * LOGFS_MAX_LEVELS is one more for the actual data level of a file.  It is
+ * the maximal number of levels for one file.
+ * LOGFS_NO_AREAS is twice that, as the inode file and regular files are
+ * effectively stacked on top of each other.
+ */
+#define LOGFS_MAX_INDIRECT	(5)
+#define LOGFS_MAX_LEVELS	(LOGFS_MAX_INDIRECT + 1)
+#define LOGFS_NO_AREAS		(2 * LOGFS_MAX_LEVELS)
+
+/* Maximum size of filenames */
+#define LOGFS_MAX_NAMELEN	(255)
+
+/* Number of segments in the primary journal. */
+#define LOGFS_JOURNAL_SEGS	(16)
+
+/* Maximum number of free/erased/etc. segments in journal entries */
+#define MAX_CACHED_SEGS		(64)
+
+
+/*
+ * LOGFS_OBJECT_HEADERSIZE is the size of a single header in the object store,
+ * LOGFS_MAX_OBJECTSIZE the size of the largest possible object, including
+ * its header,
+ * LOGFS_SEGMENT_RESERVE is the amount of space reserved for each segment for
+ * its segment header and the padded space at the end when no further objects
+ * fit.
+ */
+#define LOGFS_OBJECT_HEADERSIZE	(0x1c)
+#define LOGFS_SEGMENT_HEADERSIZE (0x18)
+#define LOGFS_MAX_OBJECTSIZE	(LOGFS_OBJECT_HEADERSIZE + LOGFS_BLOCKSIZE)
+#define LOGFS_SEGMENT_RESERVE	\
+	(LOGFS_SEGMENT_HEADERSIZE + LOGFS_MAX_OBJECTSIZE - 1)
+
+/*
+ * Segment types:
+ * SEG_SUPER	- Data or indirect block
+ * SEG_JOURNAL	- Inode
+ * SEG_OSTORE	- Dentry
+ */
+enum {
+	SEG_SUPER	= 0x01,
+	SEG_JOURNAL	= 0x02,
+	SEG_OSTORE	= 0x03,
+};
+
+/**
+ * struct logfs_segment_header - per-segment header in the ostore
+ *
+ * @crc:			crc32 of header (there is no data)
+ * @pad:			unused, must be 0
+ * @type:			segment type, see above
+ * @level:			GC level for all objects in this segment
+ * @segno:			segment number
+ * @ec:				erase count for this segment
+ * @gec:			global erase count at time of writing
+ */
+struct logfs_segment_header {
+	__be32	crc;
+	__be16	pad;
+	__u8	type;
+	__u8	level;
+	__be32	segno;
+	__be32	ec;
+	__be64	gec;
+};
+
+SIZE_CHECK(logfs_segment_header, LOGFS_SEGMENT_HEADERSIZE);
+
+#define LOGFS_FEATURES_INCOMPAT		(0ull)
+#define LOGFS_FEATURES_RO_COMPAT	(0ull)
+#define LOGFS_FEATURES_COMPAT		(0ull)
+
+/**
+ * struct logfs_disk_super - on-medium superblock
+ *
+ * @ds_magic:			magic number, must equal LOGFS_MAGIC
+ * @ds_crc:			crc32 of structure starting with the next field
+ * @ds_ifile_levels:		maximum number of levels for ifile
+ * @ds_iblock_levels:		maximum number of levels for regular files
+ * @ds_data_levels:		number of seperate levels for data
+ * @pad0:			reserved, must be 0
+ * @ds_feature_incompat:	incompatible filesystem features
+ * @ds_feature_ro_compat:	read-only compatible filesystem features
+ * @ds_feature_compat:		compatible filesystem features
+ * @ds_flags:			flags
+ * @ds_segment_shift:		log2 of segment size
+ * @ds_block_shift:		log2 of block size
+ * @ds_write_shift:		log2 of write size
+ * @pad1:			reserved, must be 0
+ * @ds_journal_seg:		segments used by primary journal
+ * @ds_root_reserve:		bytes reserved for the superuser
+ * @ds_speed_reserve:		bytes reserved to speed up GC
+ * @ds_bad_seg_reserve:		number of segments reserved to handle bad blocks
+ * @pad2:			reserved, must be 0
+ * @pad3:			reserved, must be 0
+ *
+ * Contains only read-only fields.  Read-write fields like the amount of used
+ * space is tracked in the dynamic superblock, which is stored in the journal.
+ */
+struct logfs_disk_super {
+	struct logfs_segment_header ds_sh;
+	__be64	ds_magic;
+
+	__be32	ds_crc;
+	__u8	ds_ifile_levels;
+	__u8	ds_iblock_levels;
+	__u8	ds_data_levels;
+	__u8	ds_segment_shift;
+	__u8	ds_block_shift;
+	__u8	ds_write_shift;
+	__u8	pad0[6];
+
+	__be64	ds_filesystem_size;
+	__be32	ds_segment_size;
+	__be32  ds_bad_seg_reserve;
+
+	__be64	ds_feature_incompat;
+	__be64	ds_feature_ro_compat;
+
+	__be64	ds_feature_compat;
+	__be64	ds_feature_flags;
+
+	__be64	ds_root_reserve;
+	__be64  ds_speed_reserve;
+
+	__be32	ds_journal_seg[LOGFS_JOURNAL_SEGS];
+
+	__be64	ds_super_ofs[2];
+	__be64	pad3[8];
+};
+
+SIZE_CHECK(logfs_disk_super, 256);
+
+/*
+ * Object types:
+ * OBJ_BLOCK	- Data or indirect block
+ * OBJ_INODE	- Inode
+ * OBJ_DENTRY	- Dentry
+ */
+enum {
+	OBJ_BLOCK	= 0x04,
+	OBJ_INODE	= 0x05,
+	OBJ_DENTRY	= 0x06,
+};
+
+/**
+ * struct logfs_object_header - per-object header in the ostore
+ *
+ * @crc:			crc32 of header, excluding data_crc
+ * @len:			length of data
+ * @type:			object type, see above
+ * @compr:			compression type
+ * @ino:			inode number
+ * @bix:			block index
+ * @data_crc:			crc32 of payload
+ */
+struct logfs_object_header {
+	__be32	crc;
+	__be16	len;
+	__u8	type;
+	__u8	compr;
+	__be64	ino;
+	__be64	bix;
+	__be32	data_crc;
+} __attribute__((packed));
+
+SIZE_CHECK(logfs_object_header, LOGFS_OBJECT_HEADERSIZE);
+
+/*
+ * Reserved inode numbers:
+ * LOGFS_INO_MASTER	- master inode (for inode file)
+ * LOGFS_INO_ROOT	- root directory
+ * LOGFS_INO_SEGFILE	- per-segment used bytes and erase count
+ */
+enum {
+	LOGFS_INO_MAPPING	= 0x00,
+	LOGFS_INO_MASTER	= 0x01,
+	LOGFS_INO_ROOT		= 0x02,
+	LOGFS_INO_SEGFILE	= 0x03,
+	LOGFS_RESERVED_INOS	= 0x10,
+};
+
+/*
+ * Inode flags.  High bits should never be written to the medium.  They are
+ * reserved for in-memory usage.
+ * Low bits should either remain in sync with the corresponding FS_*_FL or
+ * reuse slots that obviously don't make sense for logfs.
+ *
+ * LOGFS_IF_DIRTY	Inode must be written back
+ * LOGFS_IF_ZOMBIE	Inode has been deleted
+ * LOGFS_IF_STILLBORN	-ENOSPC happened when creating inode
+ */
+#define LOGFS_IF_COMPRESSED	0x00000004 /* == FS_COMPR_FL */
+#define LOGFS_IF_DIRTY		0x20000000
+#define LOGFS_IF_ZOMBIE		0x40000000
+#define LOGFS_IF_STILLBORN	0x80000000
+
+/* Flags available to chattr */
+#define LOGFS_FL_USER_VISIBLE	(LOGFS_IF_COMPRESSED)
+#define LOGFS_FL_USER_MODIFIABLE (LOGFS_IF_COMPRESSED)
+/* Flags inherited from parent directory on file/directory creation */
+#define LOGFS_FL_INHERITED	(LOGFS_IF_COMPRESSED)
+
+/**
+ * struct logfs_disk_inode - on-medium inode
+ *
+ * @di_mode:			file mode
+ * @di_pad:			reserved, must be 0
+ * @di_flags:			inode flags, see above
+ * @di_uid:			user id
+ * @di_gid:			group id
+ * @di_ctime:			change time
+ * @di_mtime:			modify time
+ * @di_refcount:		reference count (aka nlink or link count)
+ * @di_generation:		inode generation, for nfs
+ * @di_used_bytes:		number of bytes used
+ * @di_size:			file size
+ * @di_data:			data pointers
+ */
+struct logfs_disk_inode {
+	__be16	di_mode;
+	__u8	di_height;
+	__u8	di_pad;
+	__be32	di_flags;
+	__be32	di_uid;
+	__be32	di_gid;
+
+	__be64	di_ctime;
+	__be64	di_mtime;
+
+	__be64	di_atime;
+	__be32	di_refcount;
+	__be32	di_generation;
+
+	__be64	di_used_bytes;
+	__be64	di_size;
+
+	__be64	di_data[LOGFS_EMBEDDED_FIELDS];
+};
+
+SIZE_CHECK(logfs_disk_inode, 200);
+
+#define INODE_POINTER_OFS \
+	(offsetof(struct logfs_disk_inode, di_data) / sizeof(__be64))
+#define INODE_USED_OFS \
+	(offsetof(struct logfs_disk_inode, di_used_bytes) / sizeof(__be64))
+#define INODE_SIZE_OFS \
+	(offsetof(struct logfs_disk_inode, di_size) / sizeof(__be64))
+#define INODE_HEIGHT_OFS	(0)
+
+/**
+ * struct logfs_disk_dentry - on-medium dentry structure
+ *
+ * @ino:			inode number
+ * @namelen:			length of file name
+ * @type:			file type, identical to bits 12..15 of mode
+ * @name:			file name
+ */
+/* FIXME: add 6 bytes of padding to remove the __packed */
+struct logfs_disk_dentry {
+	__be64	ino;
+	__be16	namelen;
+	__u8	type;
+	__u8	name[LOGFS_MAX_NAMELEN];
+} __attribute__((packed));
+
+SIZE_CHECK(logfs_disk_dentry, 266);
+
+#define RESERVED		0xffffffff
+#define BADSEG			0xffffffff
+/**
+ * struct logfs_segment_entry - segment file entry
+ *
+ * @ec_level:			erase count and level
+ * @valid:			number of valid bytes
+ *
+ * Segment file contains one entry for every segment.  ec_level contains the
+ * erasecount in the upper 28 bits and the level in the lower 4 bits.  An
+ * ec_level of BADSEG (-1) identifies bad segments.  valid contains the number
+ * of valid bytes or RESERVED (-1 again) if the segment is used for either the
+ * superblock or the journal, or when the segment is bad.
+ */
+struct logfs_segment_entry {
+	__be32	ec_level;
+	__be32	valid;
+};
+
+SIZE_CHECK(logfs_segment_entry, 8);
+
+/**
+ * struct logfs_journal_header - header for journal entries (JEs)
+ *
+ * @h_crc:			crc32 of journal entry
+ * @h_len:			length of compressed journal entry,
+ *				not including header
+ * @h_datalen:			length of uncompressed data
+ * @h_type:			JE type
+ * @h_compr:			compression type
+ * @h_pad:			reserved
+ */
+struct logfs_journal_header {
+	__be32	h_crc;
+	__be16	h_len;
+	__be16	h_datalen;
+	__be16	h_type;
+	__u8	h_compr;
+	__u8	h_pad[5];
+};
+
+SIZE_CHECK(logfs_journal_header, 16);
+
+/*
+ * Life expectency of data.
+ * VIM_DEFAULT		- default vim
+ * VIM_SEGFILE		- for segment file only - very short-living
+ * VIM_GC		- GC'd data - likely long-living
+ */
+enum logfs_vim {
+	VIM_DEFAULT	= 0,
+	VIM_SEGFILE	= 1,
+};
+
+/**
+ * struct logfs_je_area - wbuf header
+ *
+ * @segno:			segment number of area
+ * @used_bytes:			number of bytes already used
+ * @gc_level:			GC level
+ * @vim:			life expectancy of data
+ *
+ * "Areas" are segments currently being used for writing.  There is at least
+ * one area per GC level.  Several may be used to seperate long-living from
+ * short-living data.  If an area with unknown vim is encountered, it can
+ * simply be closed.
+ * The write buffer immediately follow this header.
+ */
+struct logfs_je_area {
+	__be32	segno;
+	__be32	used_bytes;
+	__u8	gc_level;
+	__u8	vim;
+} __attribute__((packed));
+
+SIZE_CHECK(logfs_je_area, 10);
+
+#define MAX_JOURNAL_HEADER \
+	(sizeof(struct logfs_journal_header) + sizeof(struct logfs_je_area))
+
+/**
+ * struct logfs_je_dynsb - dynamic superblock
+ *
+ * @ds_gec:			global erase count
+ * @ds_sweeper:			current position of GC "sweeper"
+ * @ds_rename_dir:		source directory ino (see dir.c documentation)
+ * @ds_rename_pos:		position of source dd (see dir.c documentation)
+ * @ds_victim_ino:		victims of incomplete dir operation (see dir.c)
+ * @ds_victim_ino:		parent inode of victim (see dir.c)
+ * @ds_used_bytes:		number of used bytes
+ */
+struct logfs_je_dynsb {
+	__be64	ds_gec;
+	__be64	ds_sweeper;
+
+	__be64	ds_rename_dir;
+	__be64	ds_rename_pos;
+
+	__be64	ds_victim_ino;
+	__be64	ds_victim_parent; /* XXX */
+
+	__be64	ds_used_bytes;
+	__be32	ds_generation;
+	__be32	pad;
+};
+
+SIZE_CHECK(logfs_je_dynsb, 64);
+
+/**
+ * struct logfs_je_anchor - anchor of filesystem tree, aka master inode
+ *
+ * @da_size:			size of inode file
+ * @da_last_ino:		last created inode
+ * @da_used_bytes:		number of bytes used
+ * @da_data:			data pointers
+ */
+struct logfs_je_anchor {
+	__be64	da_size;
+	__be64	da_last_ino;
+
+	__be64	da_used_bytes;
+	u8	da_height;
+	u8	pad[7];
+
+	__be64	da_data[LOGFS_EMBEDDED_FIELDS];
+};
+
+SIZE_CHECK(logfs_je_anchor, 168);
+
+/**
+ * struct logfs_je_spillout - spillout entry (from 1st to 2nd journal)
+ *
+ * @so_segment:			segments used for 2nd journal
+ *
+ * Length of the array is given by h_len field in the header.
+ */
+struct logfs_je_spillout {
+	__be64	so_segment[0];
+};
+
+SIZE_CHECK(logfs_je_spillout, 0);
+
+/**
+ * struct logfs_je_journal_ec - erase counts for all journal segments
+ *
+ * @ec:				erase count
+ *
+ * Length of the array is given by h_len field in the header.
+ */
+struct logfs_je_journal_ec {
+	__be32	ec[0];
+};
+
+SIZE_CHECK(logfs_je_journal_ec, 0);
+
+/**
+ * struct logfs_je_free_segments - list of free segmetns with erase count
+ */
+struct logfs_je_free_segments {
+	__be32	segno;
+	__be32	ec;
+};
+
+SIZE_CHECK(logfs_je_free_segments, 8);
+
+/**
+ * struct logfs_seg_alias - list of segment aliases
+ */
+struct logfs_seg_alias {
+	__be32	old_segno;
+	__be32	new_segno;
+};
+
+SIZE_CHECK(logfs_seg_alias, 8);
+
+/**
+ * struct logfs_obj_alias - list of object aliases
+ */
+struct logfs_obj_alias {
+	__be64	ino;
+	__be64	bix;
+	__be64	val;
+	u8	level;
+	u8	pad[5];
+	__be16	child_no;
+};
+
+SIZE_CHECK(logfs_obj_alias, 32);
+
+/**
+ * Compression types.
+ *
+ * COMPR_NONE	- uncompressed
+ * COMPR_ZLIB	- compressed with zlib
+ */
+enum {
+	COMPR_NONE	= 0,
+	COMPR_ZLIB	= 1,
+};
+
+/*
+ * Journal entries come in groups of 16.  First group contains unique
+ * entries, next groups contain one entry per level
+ *
+ * JE_FIRST	- smallest possible journal entry number
+ *
+ * JEG_BASE	- base group, containing unique entries
+ * JE_COMMIT	- commit entry, validates all previous entries
+ * JE_DYNSB	- dynamic superblock, anything that ought to be in the
+ *		  superblock but cannot because it is read-write data
+ * JE_ANCHOR	- anchor aka master inode aka inode file's inode
+ * JE_ERASECOUNT  erasecounts for all journal segments
+ * JE_SPILLOUT	- unused
+ * JE_SEG_ALIAS	- aliases segments
+ * JE_AREA	- area description
+ *
+ * JE_LAST	- largest possible journal entry number
+ */
+enum {
+	JE_FIRST	= 0x01,
+
+	JEG_BASE	= 0x00,
+	JE_COMMIT	= 0x02,
+	JE_DYNSB	= 0x03,
+	JE_ANCHOR	= 0x04,
+	JE_ERASECOUNT	= 0x05,
+	JE_SPILLOUT	= 0x06,
+	JE_OBJ_ALIAS	= 0x0d,
+	JE_AREA		= 0x0e,
+
+	JE_LAST		= 0x0e,
+};
+
+#endif