Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest:
  lguest: documentation update
  lguest: Add to maintainers file.
  lguest: build fix
  lguest: clean up lguest_launcher.h
  lguest: remove unused "wake" element from struct lguest
  lguest: use defines from x86 headers instead of magic numbers
  lguest: example launcher header cleanup.

10 files changed, 275 insertions, 173 deletions

diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 35d19ae58de..cb4c67025d5 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -128,9 +128,12 @@ static void unmap_switcher(void)
 		__free_pages(switcher_page[i], 0);
 }
 
-/*L:305
+/*H:032
  * Dealing With Guest Memory.
  *
+ * Before we go too much further into the Host, we need to grok the routines
+ * we use to deal with Guest memory.
+ *
  * When the Guest gives us (what it thinks is) a physical address, we can use
  * the normal copy_from_user() & copy_to_user() on the corresponding place in
  * the memory region allocated by the Launcher.
diff --git a/drivers/lguest/hypercalls.c b/drivers/lguest/hypercalls.c
index 9d5184c7c14..b478affe8f9 100644
--- a/drivers/lguest/hypercalls.c
+++ b/drivers/lguest/hypercalls.c
@@ -90,6 +90,7 @@ static void do_hcall(struct lguest *lg, struct hcall_args *args)
 		lg->pending_notify = args->arg1;
 		break;
 	default:
+		/* It should be an architecture-specific hypercall. */
 		if (lguest_arch_do_hcall(lg, args))
 			kill_guest(lg, "Bad hypercall %li\n", args->arg0);
 	}
@@ -157,7 +158,6 @@ static void do_async_hcalls(struct lguest *lg)
  * Guest makes a hypercall, we end up here to set things up: */
 static void initialize(struct lguest *lg)
 {
-
 	/* You can't do anything until you're initialized.  The Guest knows the
 	 * rules, so we're unforgiving here. */
 	if (lg->hcall->arg0 != LHCALL_LGUEST_INIT) {
@@ -174,7 +174,8 @@ static void initialize(struct lguest *lg)
 	    || get_user(lg->noirq_end, &lg->lguest_data->noirq_end))
 		kill_guest(lg, "bad guest page %p", lg->lguest_data);
 
-	/* We write the current time into the Guest's data page once now. */
+	/* We write the current time into the Guest's data page once so it can
+	 * set its clock. */
 	write_timestamp(lg);
 
 	/* page_tables.c will also do some setup. */
@@ -182,8 +183,8 @@ static void initialize(struct lguest *lg)
 
 	/* This is the one case where the above accesses might have been the
 	 * first write to a Guest page.  This may have caused a copy-on-write
-	 * fault, but the Guest might be referring to the old (read-only)
-	 * page. */
+	 * fault, but the old page might be (read-only) in the Guest
+	 * pagetable. */
 	guest_pagetable_clear_all(lg);
 }
 
@@ -220,7 +221,7 @@ void do_hypercalls(struct lguest *lg)
 		 * Normally it doesn't matter: the Guest will run again and
 		 * update the trap number before we come back here.
 		 *
-		 * However, if we are signalled or the Guest sends DMA to the
+		 * However, if we are signalled or the Guest sends I/O to the
 		 * Launcher, the run_guest() loop will exit without running the
 		 * Guest.  When it comes back it would try to re-run the
 		 * hypercall. */
diff --git a/drivers/lguest/interrupts_and_traps.c b/drivers/lguest/interrupts_and_traps.c
index 82966982cb3..2b66f79c208 100644
--- a/drivers/lguest/interrupts_and_traps.c
+++ b/drivers/lguest/interrupts_and_traps.c
@@ -92,8 +92,8 @@ static void set_guest_interrupt(struct lguest *lg, u32 lo, u32 hi, int has_err)
 
 	/* Remember that we never let the Guest actually disable interrupts, so
 	 * the "Interrupt Flag" bit is always set.  We copy that bit from the
-	 * Guest's "irq_enabled" field into the eflags word: the Guest copies
-	 * it back in "lguest_iret". */
+	 * Guest's "irq_enabled" field into the eflags word: we saw the Guest
+	 * copy it back in "lguest_iret". */
 	eflags = lg->regs->eflags;
 	if (get_user(irq_enable, &lg->lguest_data->irq_enabled) == 0
 	    && !(irq_enable & X86_EFLAGS_IF))
@@ -124,7 +124,7 @@ static void set_guest_interrupt(struct lguest *lg, u32 lo, u32 hi, int has_err)
 			kill_guest(lg, "Disabling interrupts");
 }
 
-/*H:200
+/*H:205
  * Virtual Interrupts.
  *
  * maybe_do_interrupt() gets called before every entry to the Guest, to see if
@@ -256,19 +256,21 @@ int deliver_trap(struct lguest *lg, unsigned int num)
 	 * bogus one in): if we fail here, the Guest will be killed. */
 	if (!idt_present(lg->arch.idt[num].a, lg->arch.idt[num].b))
 		return 0;
-	set_guest_interrupt(lg, lg->arch.idt[num].a, lg->arch.idt[num].b, has_err(num));
+	set_guest_interrupt(lg, lg->arch.idt[num].a, lg->arch.idt[num].b,
+			    has_err(num));
 	return 1;
 }
 
 /*H:250 Here's the hard part: returning to the Host every time a trap happens
  * and then calling deliver_trap() and re-entering the Guest is slow.
- * Particularly because Guest userspace system calls are traps (trap 128).
+ * Particularly because Guest userspace system calls are traps (usually trap
+ * 128).
  *
  * So we'd like to set up the IDT to tell the CPU to deliver traps directly
  * into the Guest.  This is possible, but the complexities cause the size of
  * this file to double!  However, 150 lines of code is worth writing for taking
  * system calls down from 1750ns to 270ns.  Plus, if lguest didn't do it, all
- * the other hypervisors would tease it.
+ * the other hypervisors would beat it up at lunchtime.
  *
  * This routine indicates if a particular trap number could be delivered
  * directly. */
@@ -331,7 +333,7 @@ void pin_stack_pages(struct lguest *lg)
  * change stacks on each context switch. */
 void guest_set_stack(struct lguest *lg, u32 seg, u32 esp, unsigned int pages)
 {
-	/* You are not allowd have a stack segment with privilege level 0: bad
+	/* You are not allowed have a stack segment with privilege level 0: bad
 	 * Guest! */
 	if ((seg & 0x3) != GUEST_PL)
 		kill_guest(lg, "bad stack segment %i", seg);
@@ -350,7 +352,7 @@ void guest_set_stack(struct lguest *lg, u32 seg, u32 esp, unsigned int pages)
  * part of the Host: page table handling. */
 
 /*H:235 This is the routine which actually checks the Guest's IDT entry and
- * transfers it into our entry in "struct lguest": */
+ * transfers it into the entry in "struct lguest": */
 static void set_trap(struct lguest *lg, struct desc_struct *trap,
 		     unsigned int num, u32 lo, u32 hi)
 {
@@ -456,6 +458,18 @@ void copy_traps(const struct lguest *lg, struct desc_struct *idt,
 	}
 }
 
+/*H:200
+ * The Guest Clock.
+ *
+ * There are two sources of virtual interrupts.  We saw one in lguest_user.c:
+ * the Launcher sending interrupts for virtual devices.  The other is the Guest
+ * timer interrupt.
+ *
+ * The Guest uses the LHCALL_SET_CLOCKEVENT hypercall to tell us how long to
+ * the next timer interrupt (in nanoseconds).  We use the high-resolution timer
+ * infrastructure to set a callback at that time.
+ *
+ * 0 means "turn off the clock". */
 void guest_set_clockevent(struct lguest *lg, unsigned long delta)
 {
 	ktime_t expires;
@@ -466,20 +480,27 @@ void guest_set_clockevent(struct lguest *lg, unsigned long delta)
 		return;
 	}
 
+	/* We use wallclock time here, so the Guest might not be running for
+	 * all the time between now and the timer interrupt it asked for.  This
+	 * is almost always the right thing to do. */
 	expires = ktime_add_ns(ktime_get_real(), delta);
 	hrtimer_start(&lg->hrt, expires, HRTIMER_MODE_ABS);
 }
 
+/* This is the function called when the Guest's timer expires. */
 static enum hrtimer_restart clockdev_fn(struct hrtimer *timer)
 {
 	struct lguest *lg = container_of(timer, struct lguest, hrt);
 
+	/* Remember the first interrupt is the timer interrupt. */
 	set_bit(0, lg->irqs_pending);
+	/* If the Guest is actually stopped, we need to wake it up. */
 	if (lg->halted)
 		wake_up_process(lg->tsk);
 	return HRTIMER_NORESTART;
 }
 
+/* This sets up the timer for this Guest. */
 void init_clockdev(struct lguest *lg)
 {
 	hrtimer_init(&lg->hrt, CLOCK_REALTIME, HRTIMER_MODE_ABS);
diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h
index d9144beca82..86924891b5e 100644
--- a/drivers/lguest/lg.h
+++ b/drivers/lguest/lg.h
@@ -74,9 +74,6 @@ struct lguest
 	u32 pgdidx;
 	struct pgdir pgdirs[4];
 
-	/* Cached wakeup: we hold a reference to this task. */
-	struct task_struct *wake;
-
 	unsigned long noirq_start, noirq_end;
 	unsigned long pending_notify; /* pfn from LHCALL_NOTIFY */
 
@@ -103,7 +100,7 @@ int lguest_address_ok(const struct lguest *lg,
 void __lgread(struct lguest *, void *, unsigned long, unsigned);
 void __lgwrite(struct lguest *, unsigned long, const void *, unsigned);
 
-/*L:306 Using memory-copy operations like that is usually inconvient, so we
+/*H:035 Using memory-copy operations like that is usually inconvient, so we
  * have the following helper macros which read and write a specific type (often
  * an unsigned long).
  *
@@ -191,7 +188,7 @@ void write_timestamp(struct lguest *lg);
  * Let's step aside for the moment, to study one important routine that's used
  * widely in the Host code.
  *
- * There are many cases where the Guest does something invalid, like pass crap
+ * There are many cases where the Guest can do something invalid, like pass crap
  * to a hypercall.  Since only the Guest kernel can make hypercalls, it's quite
  * acceptable to simply terminate the Guest and give the Launcher a nicely
  * formatted reason.  It's also simpler for the Guest itself, which doesn't
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index 71c64837b43..8904f72f97c 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -53,7 +53,8 @@ struct lguest_device {
  * Device configurations
  *
  * The configuration information for a device consists of a series of fields.
- * The device will look for these fields during setup.
+ * We don't really care what they are: the Launcher set them up, and the driver
+ * will look at them during setup.
  *
  * For us these fields come immediately after that device's descriptor in the
  * lguest_devices page.
@@ -122,8 +123,8 @@ static void lg_set_status(struct virtio_device *vdev, u8 status)
  * The other piece of infrastructure virtio needs is a "virtqueue": a way of
  * the Guest device registering buffers for the other side to read from or
  * write into (ie. send and receive buffers).  Each device can have multiple
- * virtqueues: for example the console has one queue for sending and one for
- * receiving.
+ * virtqueues: for example the console driver uses one queue for sending and
+ * another for receiving.
  *
  * Fortunately for us, a very fast shared-memory-plus-descriptors virtqueue
  * already exists in virtio_ring.c.  We just need to connect it up.
@@ -158,7 +159,7 @@ static void lg_notify(struct virtqueue *vq)
  *
  * This is kind of an ugly duckling.  It'd be nicer to have a standard
  * representation of a virtqueue in the configuration space, but it seems that
- * everyone wants to do it differently.  The KVM guys want the Guest to
+ * everyone wants to do it differently.  The KVM coders want the Guest to
  * allocate its own pages and tell the Host where they are, but for lguest it's
  * simpler for the Host to simply tell us where the pages are.
  *
@@ -284,6 +285,8 @@ static void add_lguest_device(struct lguest_device_desc *d)
 {
 	struct lguest_device *ldev;
 
+	/* Start with zeroed memory; Linux's device layer seems to count on
+	 * it. */
 	ldev = kzalloc(sizeof(*ldev), GFP_KERNEL);
 	if (!ldev) {
 		printk(KERN_EMERG "Cannot allocate lguest dev %u\n",
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index ee405b38383..9d716fa42ca 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -8,20 +8,22 @@
 #include <linux/fs.h>
 #include "lg.h"
 
-/*L:315 To force the Guest to stop running and return to the Launcher, the
- * Waker sets writes LHREQ_BREAK and the value "1" to /dev/lguest.  The
- * Launcher then writes LHREQ_BREAK and "0" to release the Waker. */
+/*L:055 When something happens, the Waker process needs a way to stop the
+ * kernel running the Guest and return to the Launcher.  So the Waker writes
+ * LHREQ_BREAK and the value "1" to /dev/lguest to do this.  Once the Launcher
+ * has done whatever needs attention, it writes LHREQ_BREAK and "0" to release
+ * the Waker. */
 static int break_guest_out(struct lguest *lg, const unsigned long __user *input)
 {
 	unsigned long on;
 
-	/* Fetch whether they're turning break on or off.. */
+	/* Fetch whether they're turning break on or off. */
 	if (get_user(on, input) != 0)
 		return -EFAULT;
 
 	if (on) {
 		lg->break_out = 1;
-		/* Pop it out (may be running on different CPU) */
+		/* Pop it out of the Guest (may be running on different CPU) */
 		wake_up_process(lg->tsk);
 		/* Wait for them to reset it */
 		return wait_event_interruptible(lg->break_wq, !lg->break_out);
@@ -58,7 +60,7 @@ static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o)
 	if (!lg)
 		return -EINVAL;
 
-	/* If you're not the task which owns the guest, go away. */
+	/* If you're not the task which owns the Guest, go away. */
 	if (current != lg->tsk)
 		return -EPERM;
 
@@ -92,8 +94,8 @@ static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o)
  * base: The start of the Guest-physical memory inside the Launcher memory.
  *
  * pfnlimit: The highest (Guest-physical) page number the Guest should be
- * allowed to access.  The Launcher has to live in Guest memory, so it sets
- * this to ensure the Guest can't reach it.
+ * allowed to access.  The Guest memory lives inside the Launcher, so it sets
+ * this to ensure the Guest can only reach its own memory.
  *
  * pgdir: The (Guest-physical) address of the top of the initial Guest
  * pagetables (which are set up by the Launcher).
@@ -189,7 +191,7 @@ unlock:
 }
 
 /*L:010 The first operation the Launcher does must be a write.  All writes
- * start with a 32 bit number: for the first write this must be
+ * start with an unsigned long number: for the first write this must be
  * LHREQ_INITIALIZE to set up the Guest.  After that the Launcher can use
  * writes of other values to send interrupts. */
 static ssize_t write(struct file *file, const char __user *in,
@@ -275,8 +277,7 @@ static int close(struct inode *inode, struct file *file)
  * The Launcher is the Host userspace program which sets up, runs and services
  * the Guest.  In fact, many comments in the Drivers which refer to "the Host"
  * doing things are inaccurate: the Launcher does all the device handling for
- * the Guest.  The Guest can't tell what's done by the the Launcher and what by
- * the Host.
+ * the Guest, but the Guest can't know that.
  *
  * Just to confuse you: to the Host kernel, the Launcher *is* the Guest and we
  * shall see more of that later.
diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c
index 2a45f0691c9..fffabb32715 100644
--- a/drivers/lguest/page_tables.c
+++ b/drivers/lguest/page_tables.c
@@ -26,7 +26,8 @@
  *
  * We use two-level page tables for the Guest.  If you're not entirely
  * comfortable with virtual addresses, physical addresses and page tables then
- * I recommend you review lguest.c's "Page Table Handling" (with diagrams!).
+ * I recommend you review arch/x86/lguest/boot.c's "Page Table Handling" (with
+ * diagrams!).
  *
  * The Guest keeps page tables, but we maintain the actual ones here: these are
  * called "shadow" page tables.  Which is a very Guest-centric name: these are
@@ -36,11 +37,11 @@
  *
  * Anyway, this is the most complicated part of the Host code.  There are seven
  * parts to this:
- *  (i) Setting up a page table entry for the Guest when it faults,
- *  (ii) Setting up the page table entry for the Guest stack,
- *  (iii) Setting up a page table entry when the Guest tells us it has changed,
+ *  (i) Looking up a page table entry when the Guest faults,
+ *  (ii) Making sure the Guest stack is mapped,
+ *  (iii) Setting up a page table entry when the Guest tells us one has changed,
  *  (iv) Switching page tables,
- *  (v) Flushing (thowing away) page tables,
+ *  (v) Flushing (throwing away) page tables,
  *  (vi) Mapping the Switcher when the Guest is about to run,
  *  (vii) Setting up the page tables initially.
  :*/
@@ -57,16 +58,15 @@
 static DEFINE_PER_CPU(pte_t *, switcher_pte_pages);
 #define switcher_pte_page(cpu) per_cpu(switcher_pte_pages, cpu)
 
-/*H:320 With our shadow and Guest types established, we need to deal with
- * them: the page table code is curly enough to need helper functions to keep
- * it clear and clean.
+/*H:320 The page table code is curly enough to need helper functions to keep it
+ * clear and clean.
  *
  * There are two functions which return pointers to the shadow (aka "real")
  * page tables.
  *
  * spgd_addr() takes the virtual address and returns a pointer to the top-level
- * page directory entry for that address.  Since we keep track of several page
- * tables, the "i" argument tells us which one we're interested in (it's
+ * page directory entry (PGD) for that address.  Since we keep track of several
+ * page tables, the "i" argument tells us which one we're interested in (it's
  * usually the current one). */
 static pgd_t *spgd_addr(struct lguest *lg, u32 i, unsigned long vaddr)
 {
@@ -81,9 +81,9 @@ static pgd_t *spgd_addr(struct lguest *lg, u32 i, unsigned long vaddr)
 	return &lg->pgdirs[i].pgdir[index];
 }
 
-/* This routine then takes the PGD entry given above, which contains the
- * address of the PTE page.  It then returns a pointer to the PTE entry for the
- * given address. */
+/* This routine then takes the page directory entry returned above, which
+ * contains the address of the page table entry (PTE) page.  It then returns a
+ * pointer to the PTE entry for the given address. */
 static pte_t *spte_addr(struct lguest *lg, pgd_t spgd, unsigned long vaddr)
 {
 	pte_t *page = __va(pgd_pfn(spgd) << PAGE_SHIFT);
@@ -191,7 +191,7 @@ static void check_gpgd(struct lguest *lg, pgd_t gpgd)
 }
 
 /*H:330
- * (i) Setting up a page table entry for the Guest when it faults
+ * (i) Looking up a page table entry when the Guest faults.
  *
  * We saw this call in run_guest(): when we see a page fault in the Guest, we
  * come here.  That's because we only set up the shadow page tables lazily as
@@ -199,7 +199,7 @@ static void check_gpgd(struct lguest *lg, pgd_t gpgd)
  * and return to the Guest without it knowing.
  *
  * If we fixed up the fault (ie. we mapped the address), this routine returns
- * true. */
+ * true.  Otherwise, it was a real fault and we need to tell the Guest. */
 int demand_page(struct lguest *lg, unsigned long vaddr, int errcode)
 {
 	pgd_t gpgd;
@@ -246,16 +246,16 @@ int demand_page(struct lguest *lg, unsigned long vaddr, int errcode)
 	if ((errcode & 2) && !(pte_flags(gpte) & _PAGE_RW))
 		return 0;
 
-	/* User access to a kernel page? (bit 3 == user access) */
+	/* User access to a kernel-only page? (bit 3 == user access) */
 	if ((errcode & 4) && !(pte_flags(gpte) & _PAGE_USER))
 		return 0;
 
 	/* Check that the Guest PTE flags are OK, and the page number is below
 	 * the pfn_limit (ie. not mapping the Launcher binary). */
 	check_gpte(lg, gpte);
+
 	/* Add the _PAGE_ACCESSED and (for a write) _PAGE_DIRTY flag */
 	gpte = pte_mkyoung(gpte);
-
 	if (errcode & 2)
 		gpte = pte_mkdirty(gpte);
 
@@ -272,23 +272,28 @@ int demand_page(struct lguest *lg, unsigned long vaddr, int errcode)
 	else
 		/* If this is a read, don't set the "writable" bit in the page
 		 * table entry, even if the Guest says it's writable.  That way
-		 * we come back here when a write does actually ocur, so we can
-		 * update the Guest's _PAGE_DIRTY flag. */
+		 * we will come back here when a write does actually occur, so
+		 * we can update the Guest's _PAGE_DIRTY flag. */
 		*spte = gpte_to_spte(lg, pte_wrprotect(gpte), 0);
 
 	/* Finally, we write the Guest PTE entry back: we've set the
 	 * _PAGE_ACCESSED and maybe the _PAGE_DIRTY flags. */
 	lgwrite(lg, gpte_ptr, pte_t, gpte);
 
-	/* We succeeded in mapping the page! */
+	/* The fault is fixed, the page table is populated, the mapping
+	 * manipulated, the result returned and the code complete.  A small
+	 * delay and a trace of alliteration are the only indications the Guest
+	 * has that a page fault occurred at all. */
 	return 1;
 }
 
-/*H:360 (ii) Setting up the page table entry for the Guest stack.
+/*H:360
+ * (ii) Making sure the Guest stack is mapped.
  *
- * Remember pin_stack_pages() which makes sure the stack is mapped?  It could
- * simply call demand_page(), but as we've seen that logic is quite long, and
- * usually the stack pages are already mapped anyway, so it's not required.
+ * Remember that direct traps into the Guest need a mapped Guest kernel stack.
+ * pin_stack_pages() calls us here: we could simply call demand_page(), but as
+ * we've seen that logic is quite long, and usually the stack pages are already
+ * mapped, so it's overkill.
  *
  * This is a quick version which answers the question: is this virtual address
  * mapped by the shadow page tables, and is it writable? */
@@ -297,7 +302,7 @@ static int page_writable(struct lguest *lg, unsigned long vaddr)
 	pgd_t *spgd;
 	unsigned long flags;
 
-	/* Look at the top level entry: is it present? */
+	/* Look at the current top level entry: is it present? */
 	spgd = spgd_addr(lg, lg->pgdidx, vaddr);
 	if (!(pgd_flags(*spgd) & _PAGE_PRESENT))
 		return 0;
@@ -333,15 +338,14 @@ static void release_pgd(struct lguest *lg, pgd_t *spgd)
 			release_pte(ptepage[i]);
 		/* Now we can free the page of PTEs */
 		free_page((long)ptepage);
-		/* And zero out the PGD entry we we never release it twice. */
+		/* And zero out the PGD entry so we never release it twice. */
 		*spgd = __pgd(0);
 	}
 }
 
-/*H:440 (v) Flushing (thowing away) page tables,
- *
- * We saw flush_user_mappings() called when we re-used a top-level pgdir page.
- * It simply releases every PTE page from 0 up to the kernel address. */
+/*H:445 We saw flush_user_mappings() twice: once from the flush_user_mappings()
+ * hypercall and once in new_pgdir() when we re-used a top-level pgdir page.
+ * It simply releases every PTE page from 0 up to the Guest's kernel address. */
 static void flush_user_mappings(struct lguest *lg, int idx)
 {
 	unsigned int i;
@@ -350,8 +354,10 @@ static void flush_user_mappings(struct lguest *lg, int idx)
 		release_pgd(lg, lg->pgdirs[idx].pgdir + i);
 }
 
-/* The Guest also has a hypercall to do this manually: it's used when a large
- * number of mappings have been changed. */
+/*H:440 (v) Flushing (throwing away) page tables,
+ *
+ * The Guest has a hypercall to throw away the page tables: it's used when a
+ * large number of mappings have been changed. */
 void guest_pagetable_flush_user(struct lguest *lg)
 {
 	/* Drop the userspace part of the current page table. */
@@ -423,8 +429,9 @@ static unsigned int new_pgdir(struct lguest *lg,
 
 /*H:430 (iv) Switching page tables
  *
- * This is what happens when the Guest changes page tables (ie. changes the
- * top-level pgdir).  This happens on almost every context switch. */
+ * Now we've seen all the page table setting and manipulation, let's see what
+ * what happens when the Guest changes page tables (ie. changes the top-level
+ * pgdir).  This occurs on almost every context switch. */
 void guest_new_pagetable(struct lguest *lg, unsigned long pgtable)
 {
 	int newpgdir, repin = 0;
@@ -443,7 +450,8 @@ void guest_new_pagetable(struct lguest *lg, unsigned long pgtable)
 }
 
 /*H:470 Finally, a routine which throws away everything: all PGD entries in all
- * the shadow page tables.  This is used when we destroy the Guest. */
+ * the shadow page tables, including the Guest's kernel mappings.  This is used
+ * when we destroy the Guest. */
 static void release_all_pagetables(struct lguest *lg)
 {
 	unsigned int i, j;
@@ -458,13 +466,22 @@ static void release_all_pagetables(struct lguest *lg)
 
 /* We also throw away everything when a Guest tells us it's changed a kernel
  * mapping.  Since kernel mappings are in every page table, it's easiest to
- * throw them all away.  This is amazingly slow, but thankfully rare. */
+ * throw them all away.  This traps the Guest in amber for a while as
+ * everything faults back in, but it's rare. */
 void guest_pagetable_clear_all(struct lguest *lg)
 {
 	release_all_pagetables(lg);
 	/* We need the Guest kernel stack mapped again. */
 	pin_stack_pages(lg);
 }
+/*:*/
+/*M:009 Since we throw away all mappings when a kernel mapping changes, our
+ * performance sucks for guests using highmem.  In fact, a guest with
+ * PAGE_OFFSET 0xc0000000 (the default) and more than about 700MB of RAM is
+ * usually slower than a Guest with less memory.
+ *
+ * This, of course, cannot be fixed.  It would take some kind of... well, I
+ * don't know, but the term "puissant code-fu" comes to mind. :*/
 
 /*H:420 This is the routine which actually sets the page table entry for then
  * "idx"'th shadow page table.
@@ -483,7 +500,7 @@ void guest_pagetable_clear_all(struct lguest *lg)
 static void do_set_pte(struct lguest *lg, int idx,
 		       unsigned long vaddr, pte_t gpte)
 {
-	/* Look up the matching shadow page directot entry. */
+	/* Look up the matching shadow page directory entry. */
 	pgd_t *spgd = spgd_addr(lg, idx, vaddr);
 
 	/* If the top level isn't present, there's no entry to update. */
@@ -500,7 +517,8 @@ static void do_set_pte(struct lguest *lg, int idx,
 			*spte = gpte_to_spte(lg, gpte,
 					     pte_flags(gpte) & _PAGE_DIRTY);
 		} else
-			/* Otherwise we can demand_page() it in later. */
+			/* Otherwise kill it and we can demand_page() it in
+			 * later. */
 			*spte = __pte(0);
 	}
 }
@@ -535,7 +553,7 @@ void guest_set_pte(struct lguest *lg,
 }
 
 /*H:400
- * (iii) Setting up a page table entry when the Guest tells us it has changed.
+ * (iii) Setting up a page table entry when the Guest tells us one has changed.
  *
  * Just like we did in interrupts_and_traps.c, it makes sense for us to deal
  * with the other side of page tables while we're here: what happens when the
@@ -612,9 +630,10 @@ void free_guest_pagetable(struct lguest *lg)
 
 /*H:480 (vi) Mapping the Switcher when the Guest is about to run.
  *
- * The Switcher and the two pages for this CPU need to be available to the
+ * The Switcher and the two pages for this CPU need to be visible in the
  * Guest (and not the pages for other CPUs).  We have the appropriate PTE pages
- * for each CPU already set up, we just need to hook them in. */
+ * for each CPU already set up, we just need to hook them in now we know which
+ * Guest is about to run on this CPU. */
 void map_switcher_in_guest(struct lguest *lg, struct lguest_pages *pages)
 {
 	pte_t *switcher_pte_page = __get_cpu_var(switcher_pte_pages);
@@ -677,6 +696,18 @@ static __init void populate_switcher_pte_page(unsigned int cpu,
 			   __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED));
 }
 
+/* We've made it through the page table code.  Perhaps our tired brains are
+ * still processing the details, or perhaps we're simply glad it's over.
+ *
+ * If nothing else, note that all this complexity in juggling shadow page
+ * tables in sync with the Guest's page tables is for one reason: for most
+ * Guests this page table dance determines how bad performance will be.  This
+ * is why Xen uses exotic direct Guest pagetable manipulation, and why both
+ * Intel and AMD have implemented shadow page table support directly into
+ * hardware.
+ *
+ * There is just one file remaining in the Host. */
+
 /*H:510 At boot or module load time, init_pagetables() allocates and populates
  * the Switcher PTE page for each CPU. */
 __init int init_pagetables(struct page **switcher_page, unsigned int pages)
diff --git a/drivers/lguest/segments.c b/drivers/lguest/segments.c
index c2434ec99f7..9e189cbec7d 100644
--- a/drivers/lguest/segments.c
+++ b/drivers/lguest/segments.c
@@ -12,8 +12,6 @@
 #include "lg.h"
 
 /*H:600
- * We've almost completed the Host; there's just one file to go!
- *
  * Segments & The Global Descriptor Table
  *
  * (That title sounds like a bad Nerdcore group.  Not to suggest that there are
@@ -55,7 +53,7 @@ static int ignored_gdt(unsigned int num)
 		|| num == GDT_ENTRY_DOUBLEFAULT_TSS);
 }
 
-/*H:610 Once the GDT has been changed, we fix the new entries up a little.  We
+/*H:630 Once the Guest gave us new GDT entries, we fix them up a little.  We
  * don't care if they're invalid: the worst that can happen is a General
  * Protection Fault in the Switcher when it restores a Guest segment register
  * which tries to use that entry.  Then we kill the Guest for causing such a
@@ -84,25 +82,33 @@ static void fixup_gdt_table(struct lguest *lg, unsigned start, unsigned end)
 	}
 }
 
-/* This routine is called at boot or modprobe time for each CPU to set up the
- * "constant" GDT entries for Guests running on that CPU. */
+/*H:610 Like the IDT, we never simply use the GDT the Guest gives us.  We keep
+ * a GDT for each CPU, and copy across the Guest's entries each time we want to
+ * run the Guest on that CPU.
+ *
+ * This routine is called at boot or modprobe time for each CPU to set up the
+ * constant GDT entries: the ones which are the same no matter what Guest we're
+ * running. */
 void setup_default_gdt_entries(struct lguest_ro_state *state)
 {
 	struct desc_struct *gdt = state->guest_gdt;
 	unsigned long tss = (unsigned long)&state->guest_tss;
 
-	/* The hypervisor segments are full 0-4G segments, privilege level 0 */
+	/* The Switcher segments are full 0-4G segments, privilege level 0 */
 	gdt[GDT_ENTRY_LGUEST_CS] = FULL_EXEC_SEGMENT;
 	gdt[GDT_ENTRY_LGUEST_DS] = FULL_SEGMENT;
 
-	/* The TSS segment refers to the TSS entry for this CPU, so we cannot
-	 * copy it from the Guest.  Forgive the magic flags */
+	/* The TSS segment refers to the TSS entry for this particular CPU.
+	 * Forgive the magic flags: the 0x8900 means the entry is Present, it's
+	 * privilege level 0 Available 386 TSS system segment, and the 0x67
+	 * means Saturn is eclipsed by Mercury in the twelfth house. */
 	gdt[GDT_ENTRY_TSS].a = 0x00000067 | (tss << 16);
 	gdt[GDT_ENTRY_TSS].b = 0x00008900 | (tss & 0xFF000000)
 		| ((tss >> 16) & 0x000000FF);
 }
 
-/* This routine is called before the Guest is run for the first time. */
+/* This routine sets up the initial Guest GDT for booting.  All entries start
+ * as 0 (unusable). */
 void setup_guest_gdt(struct lguest *lg)
 {
 	/* Start with full 0-4G segments... */
@@ -114,13 +120,8 @@ void setup_guest_gdt(struct lguest *lg)
 	lg->arch.gdt[GDT_ENTRY_KERNEL_DS].b |= (GUEST_PL << 13);
 }
 
-/* Like the IDT, we never simply use the GDT the Guest gives us.  We set up the
- * GDTs for each CPU, then we copy across the entries each time we want to run
- * a different Guest on that CPU. */
-
-/* A partial GDT load, for the three "thead-local storage" entries.  Otherwise
- * it's just like load_guest_gdt().  So much, in fact, it would probably be
- * neater to have a single hypercall to cover both. */
+/*H:650 An optimization of copy_gdt(), for just the three "thead-local storage"
+ * entries. */
 void copy_gdt_tls(const struct lguest *lg, struct desc_struct *gdt)
 {
 	unsigned int i;
@@ -129,7 +130,9 @@ void copy_gdt_tls(const struct lguest *lg, struct desc_struct *gdt)
 		gdt[i] = lg->arch.gdt[i];
 }
 
-/* This is the full version */
+/*H:640 When the Guest is run on a different CPU, or the GDT entries have
+ * changed, copy_gdt() is called to copy the Guest's GDT entries across to this
+ * CPU's GDT. */
 void copy_gdt(const struct lguest *lg, struct desc_struct *gdt)
 {
 	unsigned int i;
@@ -141,7 +144,8 @@ void copy_gdt(const struct lguest *lg, struct desc_struct *gdt)
 			gdt[i] = lg->arch.gdt[i];
 }
 
-/* This is where the Guest asks us to load a new GDT (LHCALL_LOAD_GDT). */
+/*H:620 This is where the Guest asks us to load a new GDT (LHCALL_LOAD_GDT).
+ * We copy it from the Guest and tweak the entries. */
 void load_guest_gdt(struct lguest *lg, unsigned long table, u32 num)
 {
 	/* We assume the Guest has the same number of GDT entries as the
@@ -157,16 +161,22 @@ void load_guest_gdt(struct lguest *lg, unsigned long table, u32 num)
 	lg->changed |= CHANGED_GDT;
 }
 
+/* This is the fast-track version for just changing the three TLS entries.
+ * Remember that this happens on every context switch, so it's worth
+ * optimizing.  But wouldn't it be neater to have a single hypercall to cover
+ * both cases? */
 void guest_load_tls(struct lguest *lg, unsigned long gtls)
 {
 	struct desc_struct *tls = &lg->arch.gdt[GDT_ENTRY_TLS_MIN];
 
 	__lgread(lg, tls, gtls, sizeof(*tls)*GDT_ENTRY_TLS_ENTRIES);
 	fixup_gdt_table(lg, GDT_ENTRY_TLS_MIN, GDT_ENTRY_TLS_MAX+1);
+	/* Note that just the TLS entries have changed. */
 	lg->changed |= CHANGED_GDT_TLS;
 }
+/*:*/
 
-/*
+/*H:660
  * With this, we have finished the Host.
  *
  * Five of the seven parts of our task are complete.  You have made it through
diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c
index 9eed12d5a39..482aec2a963 100644
--- a/drivers/lguest/x86/core.c
+++ b/drivers/lguest/x86/core.c
@@ -63,7 +63,7 @@ static struct lguest_pages *lguest_pages(unsigned int cpu)
 static DEFINE_PER_CPU(struct lguest *, last_guest);
 
 /*S:010
- * We are getting close to the Switcher.
+ * We approach the Switcher.
  *
  * Remember that each CPU has two pages which are visible to the Guest when it
  * runs on that CPU.  This has to contain the state for that Guest: we copy the
@@ -134,7 +134,7 @@ static void run_guest_once(struct lguest *lg, struct lguest_pages *pages)
 	 *
 	 * The lcall also pushes the old code segment (KERNEL_CS) onto the
 	 * stack, then the address of this call.  This stack layout happens to
-	 * exactly match the stack of an interrupt... */
+	 * exactly match the stack layout created by an interrupt... */
 	asm volatile("pushf; lcall *lguest_entry"
 		     /* This is how we tell GCC that %eax ("a") and %ebx ("b")
 		      * are changed by this routine.  The "=" means output. */
@@ -151,40 +151,46 @@ static void run_guest_once(struct lguest *lg, struct lguest_pages *pages)
 }
 /*:*/
 
+/*M:002 There are hooks in the scheduler which we can register to tell when we
+ * get kicked off the CPU (preempt_notifier_register()).  This would allow us
+ * to lazily disable SYSENTER which would regain some performance, and should
+ * also simplify copy_in_guest_info().  Note that we'd still need to restore
+ * things when we exit to Launcher userspace, but that's fairly easy.
+ *
+ * The hooks were designed for KVM, but we can also put them to good use. :*/
+
 /*H:040 This is the i386-specific code to setup and run the Guest.  Interrupts
  * are disabled: we own the CPU. */
 void lguest_arch_run_guest(struct lguest *lg)
 {
-	/* Remember the awfully-named TS bit?  If the Guest has asked
-	 * to set it we set it now, so we can trap and pass that trap
-	 * to the Guest if it uses the FPU. */
+	/* Remember the awfully-named TS bit?  If the Guest has asked to set it
+	 * we set it now, so we can trap and pass that trap to the Guest if it
+	 * uses the FPU. */
 	if (lg->ts)
 		lguest_set_ts();
 
-	/* SYSENTER is an optimized way of doing system calls.  We
-	 * can't allow it because it always jumps to privilege level 0.
-	 * A normal Guest won't try it because we don't advertise it in
-	 * CPUID, but a malicious Guest (or malicious Guest userspace
-	 * program) could, so we tell the CPU to disable it before
-	 * running the Guest. */
+	/* SYSENTER is an optimized way of doing system calls.  We can't allow
+	 * it because it always jumps to privilege level 0.  A normal Guest
+	 * won't try it because we don't advertise it in CPUID, but a malicious
+	 * Guest (or malicious Guest userspace program) could, so we tell the