[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3

NPIV support is added to the driver.  It utilizes the interfaces of
the fc transport for the creation and deletion of vports. Within the
driver, a new Scsi_Host is created for each NPIV instance, and is
paired with a new instance of a FC port.  This allows N FC Port
elements to share a single Adapter.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

20 files changed, 5021 insertions, 1763 deletions

diff --git a/drivers/scsi/lpfc/Makefile b/drivers/scsi/lpfc/Makefile
index d1be465d5f5..d94c9e0212a 100644
--- a/drivers/scsi/lpfc/Makefile
+++ b/drivers/scsi/lpfc/Makefile
@@ -1,7 +1,7 @@
 #/*******************************************************************
 # * This file is part of the Emulex Linux Device Driver for         *
 # * Fibre Channel Host Bus Adapters.                                *
-# * Copyright (C) 2004-2005 Emulex.  All rights reserved.           *
+# * Copyright (C) 2004-2006 Emulex.  All rights reserved.           *
 # * EMULEX and SLI are trademarks of Emulex.                        *
 # * www.emulex.com                                                  *
 # *                                                                 *
@@ -27,4 +27,5 @@ endif
 obj-$(CONFIG_SCSI_LPFC) := lpfc.o
 
 lpfc-objs := lpfc_mem.o lpfc_sli.o lpfc_ct.o lpfc_els.o lpfc_hbadisc.o	\
-	lpfc_init.o lpfc_mbox.o lpfc_nportdisc.o lpfc_scsi.o lpfc_attr.o
+	lpfc_init.o lpfc_mbox.o lpfc_nportdisc.o lpfc_scsi.o lpfc_attr.o \
+	lpfc_vport.o
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 74f4d18842c..4b9019d7d50 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -34,6 +34,17 @@ struct lpfc_sli2_slim;
 #define LPFC_IOCB_LIST_CNT	2250	/* list of IOCBs for fast-path usage. */
 #define LPFC_Q_RAMP_UP_INTERVAL 120     /* lun q_depth ramp up interval */
 
+/*
+ * Following time intervals are used of adjusting SCSI device
+ * queue depths when there are driver resource error or Firmware
+ * resource error.
+ */
+#define QUEUE_RAMP_DOWN_INTERVAL	(1 * HZ)   /* 1 Second */
+#define QUEUE_RAMP_UP_INTERVAL		(300 * HZ) /* 5 minutes */
+
+/* Number of exchanges reserved for discovery to complete */
+#define LPFC_DISC_IOCB_BUFF_COUNT 20
+
 /* Define macros for 64 bit support */
 #define putPaddrLow(addr)    ((uint32_t) (0xffffffff & (u64)(addr)))
 #define putPaddrHigh(addr)   ((uint32_t) (0xffffffff & (((u64)(addr))>>32)))
@@ -97,6 +108,29 @@ typedef struct lpfc_vpd {
 		uint32_t sli2FwRev;
 		uint8_t sli2FwName[16];
 	} rev;
+	struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+		uint32_t rsvd2  :24;  /* Reserved                             */
+		uint32_t cmv	: 1;  /* Configure Max VPIs                   */
+		uint32_t ccrp   : 1;  /* Config Command Ring Polling          */
+		uint32_t csah   : 1;  /* Configure Synchronous Abort Handling */
+		uint32_t chbs   : 1;  /* Cofigure Host Backing store          */
+		uint32_t cinb   : 1;  /* Enable Interrupt Notification Block  */
+		uint32_t cerbm	: 1;  /* Configure Enhanced Receive Buf Mgmt  */
+		uint32_t cmx	: 1;  /* Configure Max XRIs                   */
+		uint32_t cmr	: 1;  /* Configure Max RPIs                   */
+#else	/*  __LITTLE_ENDIAN */
+		uint32_t cmr	: 1;  /* Configure Max RPIs                   */
+		uint32_t cmx	: 1;  /* Configure Max XRIs                   */
+		uint32_t cerbm	: 1;  /* Configure Enhanced Receive Buf Mgmt  */
+		uint32_t cinb   : 1;  /* Enable Interrupt Notification Block  */
+		uint32_t chbs   : 1;  /* Cofigure Host Backing store          */
+		uint32_t csah   : 1;  /* Configure Synchronous Abort Handling */
+		uint32_t ccrp   : 1;  /* Config Command Ring Polling          */
+		uint32_t cmv	: 1;  /* Configure Max VPIs                   */
+		uint32_t rsvd2  :24;  /* Reserved                             */
+#endif
+	} sli3Feat;
 } lpfc_vpd_t;
 
 struct lpfc_scsi_buf;
@@ -129,6 +163,7 @@ struct lpfc_stats {
 	uint32_t elsRcvRPS;
 	uint32_t elsRcvRPL;
 	uint32_t elsXmitFLOGI;
+	uint32_t elsXmitFDISC;
 	uint32_t elsXmitPLOGI;
 	uint32_t elsXmitPRLI;
 	uint32_t elsXmitADISC;
@@ -174,18 +209,21 @@ struct lpfc_sysfs_mbox {
 
 struct lpfc_hba;
 
+
 enum discovery_state {
-	LPFC_STATE_UNKNOWN   =  0,    /* HBA state is unknown */
-	LPFC_LOCAL_CFG_LINK  =  6,    /* local NPORT Id configured */
-	LPFC_FLOGI           =  7,    /* FLOGI sent to Fabric */
-	LPFC_FABRIC_CFG_LINK =  8,    /* Fabric assigned NPORT Id
-				       * configured */
-	LPFC_NS_REG          =  9,    /* Register with NameServer */
-	LPFC_NS_QRY          =  10,   /* Query NameServer for NPort ID list */
-	LPFC_BUILD_DISC_LIST =  11,   /* Build ADISC and PLOGI lists for
-				       * device authentication / discovery */
-	LPFC_DISC_AUTH       =  12,   /* Processing ADISC list */
-	LPFC_VPORT_READY     =  32,
+	LPFC_VPORT_UNKNOWN     =  0,    /* vport state is unknown */
+	LPFC_VPORT_FAILED      =  1,    /* vport has failed */
+	LPFC_LOCAL_CFG_LINK    =  6,    /* local NPORT Id configured */
+	LPFC_FLOGI             =  7,    /* FLOGI sent to Fabric */
+	LPFC_FDISC             =  8,    /* FDISC sent for vport */
+	LPFC_FABRIC_CFG_LINK   =  9,    /* Fabric assigned NPORT Id
+				         * configured */
+	LPFC_NS_REG            =  10,   /* Register with NameServer */
+	LPFC_NS_QRY            =  11,   /* Query NameServer for NPort ID list */
+	LPFC_BUILD_DISC_LIST   =  12,   /* Build ADISC and PLOGI lists for
+				         * device authentication / discovery */
+	LPFC_DISC_AUTH         =  13,   /* Processing ADISC list */
+	LPFC_VPORT_READY       =  32,
 };
 
 enum hba_state {
@@ -195,8 +233,9 @@ enum hba_state {
 	LPFC_INIT_MBX_CMDS   =   3,   /* Initialize HBA with mbox commands */
 	LPFC_LINK_DOWN       =   4,   /* HBA initialized, link is down */
 	LPFC_LINK_UP         =   5,   /* Link is up  - issue READ_LA */
-	LPFC_CLEAR_LA        =  13,   /* authentication cmplt - issue
+	LPFC_CLEAR_LA        =   6,   /* authentication cmplt - issue
 				       * CLEAR_LA */
+	LPFC_HBA_READY       =  32,
 	LPFC_HBA_ERROR       =  -1
 };
 
@@ -209,26 +248,30 @@ struct lpfc_vport {
 #define LPFC_FABRIC_PORT 3
 	enum discovery_state port_state;
 
+	uint16_t vpi;
 
 	uint32_t fc_flag;	/* FC flags */
 /* Several of these flags are HBA centric and should be moved to
  * phba->link_flag (e.g. FC_PTP, FC_PUBLIC_LOOP)
  */
-#define FC_PT2PT                0x1	/* pt2pt with no fabric */
-#define FC_PT2PT_PLOGI          0x2	/* pt2pt initiate PLOGI */
-#define FC_DISC_TMO             0x4	/* Discovery timer running */
-#define FC_PUBLIC_LOOP          0x8	/* Public loop */
-#define FC_LBIT                 0x10	/* LOGIN bit in loopinit set */
-#define FC_RSCN_MODE            0x20	/* RSCN cmd rcv'ed */
-#define FC_NLP_MORE             0x40	/* More node to process in node tbl */
-#define FC_OFFLINE_MODE         0x80	/* Interface is offline for diag */
-#define FC_FABRIC               0x100	/* We are fabric attached */
-#define FC_ESTABLISH_LINK       0x200	/* Reestablish Link */
-#define FC_RSCN_DISCOVERY       0x400	/* Authenticate all devices after RSCN*/
-#define FC_SCSI_SCAN_TMO        0x4000	/* scsi scan timer running */
-#define FC_ABORT_DISCOVERY      0x8000	/* we want to abort discovery */
-#define FC_NDISC_ACTIVE         0x10000	/* NPort discovery active */
-#define FC_BYPASSED_MODE        0x20000	/* NPort is in bypassed mode */
+#define FC_PT2PT                0x1	 /* pt2pt with no fabric */
+#define FC_PT2PT_PLOGI          0x2	 /* pt2pt initiate PLOGI */
+#define FC_DISC_TMO             0x4	 /* Discovery timer running */
+#define FC_PUBLIC_LOOP          0x8	 /* Public loop */
+#define FC_LBIT                 0x10	 /* LOGIN bit in loopinit set */
+#define FC_RSCN_MODE            0x20	 /* RSCN cmd rcv'ed */
+#define FC_NLP_MORE             0x40	 /* More node to process in node tbl */
+#define FC_OFFLINE_MODE         0x80	 /* Interface is offline for diag */
+#define FC_FABRIC               0x100	 /* We are fabric attached */
+#define FC_ESTABLISH_LINK       0x200	 /* Reestablish Link */
+#define FC_RSCN_DISCOVERY       0x400	 /* Auth all devices after RSCN */
+#define FC_SCSI_SCAN_TMO        0x4000	 /* scsi scan timer running */
+#define FC_ABORT_DISCOVERY      0x8000	 /* we want to abort discovery */
+#define FC_NDISC_ACTIVE         0x10000	 /* NPort discovery active */
+#define FC_BYPASSED_MODE        0x20000	 /* NPort is in bypassed mode */
+#define FC_RFF_NOT_SUPPORTED    0x40000	 /* RFF_ID was rejected by switch */
+#define FC_VPORT_NEEDS_REG_VPI	0x80000  /* Needs to have its vpi registered */
+#define FC_RSCN_DEFERRED	0x100000 /* A deferred RSCN being processed */
 
 	struct list_head fc_nodes;
 
@@ -269,6 +312,9 @@ struct lpfc_vport {
 #define WORKER_ELS_TMO                 0x2	/* ELS timeout */
 #define WORKER_MBOX_TMO                0x4	/* MBOX timeout */
 #define WORKER_FDMI_TMO                0x8	/* FDMI timeout */
+#define WORKER_FABRIC_BLOCK_TMO        0x10	/* fabric block timout */
+#define WORKER_RAMP_DOWN_QUEUE    0x20	/* Decrease Q depth */
+#define WORKER_RAMP_UP_QUEUE      0x40	/* Increase Q depth */
 
 	struct timer_list fc_fdmitmo;
 	struct timer_list els_tmofunc;
@@ -278,10 +324,10 @@ struct lpfc_vport {
 	uint8_t load_flag;
 #define FC_LOADING		0x1	/* HBA in process of loading drvr */
 #define FC_UNLOADING		0x2	/* HBA in process of unloading drvr */
-
+	char  *vname;		        /* Application assigned name */
+	struct fc_vport *fc_vport;
 };
 
-
 struct hbq_s {
 	uint16_t entry_count;	  /* Current number of HBQ slots */
 	uint32_t next_hbqPutIdx;  /* Index to next HBQ slot to use */
@@ -289,33 +335,38 @@ struct hbq_s {
 	uint32_t local_hbqGetIdx; /* Local copy of Get index from Port */
 };
 
-#define MAX_HBQS  16
+#define LPFC_MAX_HBQS  16
+/* this matches the possition in the lpfc_hbq_defs array */
+#define LPFC_ELS_HBQ	0
 
 struct lpfc_hba {
 	struct lpfc_sli sli;
 	uint32_t sli_rev;		/* SLI2 or SLI3 */
 	uint32_t sli3_options;		/* Mask of enabled SLI3 options */
-#define LPFC_SLI3_ENABLED	0x01
-#define LPFC_SLI3_HBQ_ENABLED	0x02
-#define LPFC_SLI3_INB_ENABLED	0x04
+#define LPFC_SLI3_ENABLED 	 0x01
+#define LPFC_SLI3_HBQ_ENABLED	 0x02
+#define LPFC_SLI3_NPIV_ENABLED	 0x04
+#define LPFC_SLI3_VPORT_TEARDOWN 0x08
 	uint32_t iocb_cmd_size;
 	uint32_t iocb_rsp_size;
 
 	enum hba_state link_state;
 	uint32_t link_flag;	/* link state flags */
-#define LS_LOOPBACK_MODE        0x40000	/* NPort is in Loopback mode */
+#define LS_LOOPBACK_MODE      0x1 	/* NPort is in Loopback mode */
 					/* This flag is set while issuing */
 					/* INIT_LINK mailbox command */
-#define LS_IGNORE_ERATT         0x80000	/* intr handler should ignore ERATT */
+#define LS_NPIV_FAB_SUPPORTED 0x2	/* Fabric supports NPIV */
+#define LS_IGNORE_ERATT       0x3	/* intr handler should ignore ERATT */
 
 	struct lpfc_sli2_slim *slim2p;
 	struct lpfc_dmabuf hbqslimp;
 
 	dma_addr_t slim2p_mapping;
 
-
 	uint16_t pci_cfg_value;
 
+	uint8_t work_found;
+#define LPFC_MAX_WORKER_ITERATION  4
 
 	uint8_t fc_linkspeed;	/* Link speed after last READ_LA */
 
@@ -325,7 +376,7 @@ struct lpfc_hba {
 	struct timer_list fc_estabtmo;	/* link establishment timer */
 	/* These fields used to be binfo */
 	uint32_t fc_pref_DID;	/* preferred D_ID */
-	uint8_t fc_pref_ALPA;	/* preferred AL_PA */
+	uint8_t  fc_pref_ALPA;	/* preferred AL_PA */
 	uint32_t fc_edtov;	/* E_D_TOV timer value */
 	uint32_t fc_arbtov;	/* ARB_TOV timer value */
 	uint32_t fc_ratov;	/* R_A_TOV timer value */
@@ -355,6 +406,8 @@ struct lpfc_hba {
 	uint32_t cfg_nodev_tmo;
 	uint32_t cfg_devloss_tmo;
 	uint32_t cfg_hba_queue_depth;
+	uint32_t cfg_peer_port_login;
+	uint32_t cfg_vport_restrict_login;
 	uint32_t cfg_fcp_class;
 	uint32_t cfg_use_adisc;
 	uint32_t cfg_ack0;
@@ -391,11 +444,9 @@ struct lpfc_hba {
 	wait_queue_head_t    *work_wait;
 	struct task_struct   *worker_thread;
 
-	struct   hbq_dmabuf *hbq_buffer_pool;
-	uint32_t hbq_buffer_count;
-	uint32_t hbq_buff_count; 	/* Current hbq buffers */
+	struct list_head hbq_buffer_list;
 	uint32_t hbq_count;	        /* Count of configured HBQs */
-	struct hbq_s hbqs[MAX_HBQS];    /* local copy of hbq indicies  */
+	struct hbq_s hbqs[LPFC_MAX_HBQS]; /* local copy of hbq indicies  */
 
 	unsigned long pci_bar0_map;     /* Physical address for PCI BAR0 */
 	unsigned long pci_bar2_map;     /* Physical address for PCI BAR2 */
@@ -413,7 +464,7 @@ struct lpfc_hba {
 
 	struct lpfc_hgp __iomem *host_gp; /* Host side get/put pointers */
 	uint32_t __iomem  *hbq_put;     /* Address in SLIM to HBQ put ptrs */
-	uint32_t __iomem  *hbq_get;     /* Address in SLIM to HBQ get ptrs */
+	uint32_t          *hbq_get;     /* Host mem address of HBQ get ptrs */
 
 	int brd_no;			/* FC board number */
 
@@ -464,6 +515,22 @@ struct lpfc_hba {
 	struct fc_host_statistics link_stats;
 	struct list_head port_list;
 	struct lpfc_vport *pport; /* physical lpfc_vport pointer */
+	uint16_t max_vpi;	/* Maximum virtual nports */
+	uint16_t vpi_cnt;	/* Nport count */
+#define LPFC_MAX_VPI 100  /* Max number of VPorts supported */
+	unsigned long *vpi_bmask; /* vpi allocation table */
+
+	/* Data structure used by fabric iocb scheduler */
+	struct list_head fabric_iocb_list;
+	atomic_t fabric_iocb_count;
+	struct timer_list fabric_block_timer;
+	unsigned long bit_flags;
+#define	FABRIC_COMANDS_BLOCKED	0
+	atomic_t num_rsrc_err;
+	atomic_t num_cmd_success;
+	unsigned long last_rsrc_error_time;
+	unsigned long last_ramp_down_time;
+	unsigned long last_ramp_up_time;
 };
 
 static inline struct Scsi_Host *
@@ -485,10 +552,9 @@ static inline int
 lpfc_is_link_up(struct lpfc_hba *phba)
 {
 	return  phba->link_state == LPFC_LINK_UP ||
-		phba->link_state == LPFC_CLEAR_LA;
+		phba->link_state == LPFC_CLEAR_LA ||
+		phba->link_state == LPFC_HBA_READY;
 }
 
-
-
 #define FC_REG_DUMP_EVENT	0x10	/* Register for Dump events */
 
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index b8adff8cea6..5cb7924fe3d 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -39,6 +39,7 @@
 #include "lpfc_version.h"
 #include "lpfc_compat.h"
 #include "lpfc_crtn.h"
+#include "lpfc_vport.h"
 
 #define LPFC_DEF_DEVLOSS_TMO 30
 #define LPFC_MIN_DEVLOSS_TMO 1
@@ -139,7 +140,7 @@ lpfc_fwrev_show(struct class_device *cdev, char *buf)
 	char fwrev[32];
 
 	lpfc_decode_firmware_rev(phba, fwrev, 1);
-	return snprintf(buf, PAGE_SIZE, "%s\n",fwrev);
+	return snprintf(buf, PAGE_SIZE, "%s, sli-%d\n", fwrev, phba->sli_rev);
 }
 
 static ssize_t
@@ -178,10 +179,11 @@ lpfc_state_show(struct class_device *cdev, char *buf)
 	case LPFC_INIT_MBX_CMDS:
 	case LPFC_LINK_DOWN:
 	case LPFC_HBA_ERROR:
-		len += snprintf(buf + len, PAGE_SIZE-len, "Link Down");
+		len += snprintf(buf + len, PAGE_SIZE-len, "Link Down\n");
 		break;
 	case LPFC_LINK_UP:
 	case LPFC_CLEAR_LA:
+	case LPFC_HBA_READY:
 		len += snprintf(buf + len, PAGE_SIZE-len, "Link Up - \n");
 
 		switch (vport->port_state) {
@@ -190,8 +192,9 @@ lpfc_state_show(struct class_device *cdev, char *buf)
 			break;
 		case LPFC_LOCAL_CFG_LINK:
 			len += snprintf(buf + len, PAGE_SIZE-len,
-					"configuring\n");
+					"Configuring Link\n");
 			break;
+		case LPFC_FDISC:
 		case LPFC_FLOGI:
 		case LPFC_FABRIC_CFG_LINK:
 		case LPFC_NS_REG:
@@ -205,7 +208,11 @@ lpfc_state_show(struct class_device *cdev, char *buf)
 			len += snprintf(buf + len, PAGE_SIZE - len, "Ready\n");
 			break;
 
-		case LPFC_STATE_UNKNOWN:
+		case LPFC_VPORT_FAILED:
+			len += snprintf(buf + len, PAGE_SIZE - len, "Failed\n");
+			break;
+
+		case LPFC_VPORT_UNKNOWN:
 			len += snprintf(buf + len, PAGE_SIZE - len,
 					"Unknown\n");
 			break;
@@ -433,6 +440,151 @@ lpfc_board_mode_store(struct class_device *cdev, const char *buf, size_t count)
 }
 
 static ssize_t
+lpfc_max_vpi_show(struct class_device *cdev, char *buf)
+{
+	struct Scsi_Host  *shost = class_to_shost(cdev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_hba   *phba = vport->phba;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", phba->max_vpi);
+}
+
+static ssize_t
+lpfc_used_vpi_show(struct class_device *cdev, char *buf)
+{
+	struct Scsi_Host  *shost = class_to_shost(cdev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_hba   *phba = vport->phba;
+
+	/* Don't count the physical port */
+	return snprintf(buf, PAGE_SIZE, "%d\n", phba->vpi_cnt-1);
+}
+
+int
+lpfc_get_hba_info(struct lpfc_hba *phba, uint32_t *mxri,
+	uint32_t *axri, uint32_t *mrpi, uint32_t *arpi)
+{
+	struct lpfc_sli   *psli = &phba->sli;
+	LPFC_MBOXQ_t *pmboxq;
+	MAILBOX_t *pmb;
+	int rc = 0;
+
+	/*
+	 * prevent udev from issuing mailbox commands until the port is
+	 * configured.
+	 */
+	if (phba->link_state < LPFC_LINK_DOWN ||
+	    !phba->mbox_mem_pool ||
+	    (phba->sli.sli_flag & LPFC_SLI2_ACTIVE) == 0)
+		return 0;
+
+	if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)
+		return 0;
+
+	pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!pmboxq)
+		return 0;
+	memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t));
+
+	pmb = &pmboxq->mb;
+	pmb->mbxCommand = MBX_READ_CONFIG;
+	pmb->mbxOwner = OWN_HOST;
+	pmboxq->context1 = NULL;
+
+	if ((phba->pport->fc_flag & FC_OFFLINE_MODE) ||
+		(!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+		rc = MBX_NOT_FINISHED;
+	else
+		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
+
+	if (rc != MBX_SUCCESS) {
+		if (rc == MBX_TIMEOUT)
+			pmboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+		else
+			mempool_free(pmboxq, phba->mbox_mem_pool);
+		return 0;
+	}
+
+	if (mrpi)
+		*mrpi = pmb->un.varRdConfig.max_rpi;
+	if (arpi)
+		*arpi = pmb->un.varRdConfig.avail_rpi;
+	if (mxri)
+		*mxri = pmb->un.varRdConfig.max_xri;
+	if (axri)
+		*axri = pmb->un.varRdConfig.avail_xri;
+
+	mempool_free(pmboxq, phba->mbox_mem_pool);
+	return 1;
+}
+
+static ssize_t
+lpfc_max_rpi_show(struct class_device *cdev, char *buf)
+{
+	struct Scsi_Host  *shost = class_to_shost(cdev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_hba   *phba = vport->phba;
+	uint32_t cnt;
+
+	if (lpfc_get_hba_info(phba, NULL, NULL, &cnt, NULL))
+		return snprintf(buf, PAGE_SIZE, "%d\n", cnt);
+	return snprintf(buf, PAGE_SIZE, "Unknown\n");
+}
+
+static ssize_t
+lpfc_used_rpi_show(struct class_device *cdev, char *buf)
+{
+	struct Scsi_Host  *shost = class_to_shost(cdev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_hba   *phba = vport->phba;
+	uint32_t cnt, acnt;
+
+	if (lpfc_get_hba_info(phba, NULL, NULL, &cnt, &acnt))
+		return snprintf(buf, PAGE_SIZE, "%d\n", (cnt - acnt));
+	return snprintf(buf, PAGE_SIZE, "Unknown\n");
+}
+
+static ssize_t
+lpfc_max_xri_show(struct class_device *cdev, char *buf)
+{
+	struct Scsi_Host  *shost = class_to_shost(cdev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_hba   *phba = vport->phba;
+	uint32_t cnt;
+
+	if (lpfc_get_hba_info(phba, &cnt, NULL, NULL, NULL))
+		return snprintf(buf, PAGE_SIZE, "%d\n", cnt);
+	return snprintf(buf, PAGE_SIZE, "Unknown\n");
+}
+
+static ssize_t
+lpfc_used_xri_show(struct class_device *cdev, char *buf)
+{
+	struct Scsi_Host  *shost = class_to_shost(cdev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_hba   *phba = vport->phba;
+	uint32_t cnt, acnt;
+
+	if (lpfc_get_hba_info(phba, &cnt, &acnt, NULL, NULL))
+		return snprintf(buf, PAGE_SIZE, "%d\n", (cnt - acnt));
+	return snprintf(buf, PAGE_SIZE, "Unknown\n");
+}
+
+static ssize_t
+lpfc_npiv_info_show(struct class_device *cdev, char *buf)
+{
+	struct Scsi_Host  *shost = class_to_shost(cdev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_hba   *phba = vport->phba;
+
+	if (!(phba->max_vpi))
+		return snprintf(buf, PAGE_SIZE, "NPIV Not Supported\n");
+	if (vport->port_type == LPFC_PHYSICAL_PORT)
+		return snprintf(buf, PAGE_SIZE, "NPIV Physical\n");
+	return snprintf(buf, PAGE_SIZE, "NPIV Virtual (VPI %d)\n", vport->vpi);
+}
+
+static ssize_t
 lpfc_poll_show(struct class_device *cdev, char *buf)
 {
 	struct Scsi_Host  *shost = class_to_shost(cdev);
@@ -640,6 +792,13 @@ static CLASS_DEVICE_ATTR(management_version, S_IRUGO, management_version_show,
 static CLASS_DEVICE_ATTR(board_mode, S_IRUGO | S_IWUSR,
 			 lpfc_board_mode_show, lpfc_board_mode_store);
 static CLASS_DEVICE_ATTR(issue_reset, S_IWUSR, NULL, lpfc_issue_reset);
+static CLASS_DEVICE_ATTR(max_vpi, S_IRUGO, lpfc_max_vpi_show, NULL);
+static CLASS_DEVICE_ATTR(used_vpi, S_IRUGO, lpfc_used_vpi_show, NULL);
+static CLASS_DEVICE_ATTR(max_rpi, S_IRUGO, lpfc_max_rpi_show, NULL);
+static CLASS_DEVICE_ATTR(used_rpi, S_IRUGO, lpfc_used_rpi_show, NULL);
+static CLASS_DEVICE_ATTR(max_xri, S_IRUGO, lpfc_max_xri_show, NULL);
+static CLASS_DEVICE_ATTR(used_xri, S_IRUGO, lpfc_used_xri_show, NULL);
+static CLASS_DEVICE_ATTR(npiv_info, S_IRUGO, lpfc_npiv_info_show, NULL);
 
 
 static char *lpfc_soft_wwn_key = "C99G71SL8032A";
@@ -829,6 +988,17 @@ MODULE_PARM_DESC(lpfc_poll, "FCP ring polling mode control:"
 static CLASS_DEVICE_ATTR(lpfc_poll, S_IRUGO | S_IWUSR,
 			 lpfc_poll_show, lpfc_poll_store);
 
+int  lpfc_sli_mode = 0;
+module_param(lpfc_sli_mode, int, 0);
+MODULE_PARM_DESC(lpfc_sli_mode, "SLI mode selector:"
+		 " 0 - auto (SLI-3 if supported),"
+		 " 2 - select SLI-2 even on SLI-3 capable HBAs,"
+		 " 3 - select SLI-3");
+
+int  lpfc_npiv_enable = 0;
+module_param(lpfc_npiv_enable, int, 0);
+MODULE_PARM_DESC(lpfc_npiv_enable, "Enable NPIV functionality");
+
 /*
 # lpfc_nodev_tmo: If set, it will hold all I/O errors on devices that disappear
 # until the timer expires. Value range is [0,255]. Default value is 30.
@@ -985,6 +1155,33 @@ LPFC_ATTR_R(hba_queue_depth, 8192, 32, 8192,
 	    "Max number of FCP commands we can queue to a lpfc HBA");
 
 /*
+# peer_port_login:  This parameter allows/prevents logins
+# between peer ports hosted on the same physical port.
+# When this parameter is set 0 peer ports of same physical port
+# are not allowed to login to each other.
+# When this parameter is set 1 peer ports of same physical port
+# are allowed to login to each other.
+# Default value of this parameter is 0.
+*/
+LPFC_ATTR_R(peer_port_login, 0, 0, 1,
+	    "Allow peer ports on the same physical port to login to each "
+	    "other.");
+
+/*
+# vport_restrict_login:  This parameter allows/prevents logins
+# between Virtual Ports and remote initiators.
+# When this parameter is not set (0) Virtual Ports will accept PLOGIs from
+# other initiators and will attempt to PLOGI all remote ports.
+# When this parameter is set (1) Virtual Ports will reject PLOGIs from
+# remote ports and will not attempt to PLOGI to other initiators.
+# This parameter does not restrict to the physical port.
+# This parameter does not restrict logins to Fabric resident remote ports.
+# Default value of this parameter is 1.
+*/
+LPFC_ATTR_RW(vport_restrict_login, 1, 0, 1,
+	    "Restrict virtual ports login to remote initiators.");
+
+/*
 # Some disk devices have a "select ID" or "select Target" capability.
 # From a protocol standpoint "select ID" usually means select the
 # Fibre channel "ALPA".  In the FC-AL Profile there is an "informative
@@ -1127,6 +1324,7 @@ LPFC_ATTR_RW(poll_tmo, 10, 1, 255,
 LPFC_ATTR_R(use_msi, 0, 0, 1, "Use Message Signaled Interrupts, if possible");
 
 
+
 struct class_device_attribute *lpfc_hba_attrs[] = {
 	&class_device_attr_info,
 	&class_device_attr_serialnum,
@@ -1143,6 +1341,8 @@ struct class_device_attribute *lpfc_hba_attrs[] = {
 	&class_device_attr_lpfc_log_verbose,
 	&class_device_attr_lpfc_lun_queue_depth,
 	&class_device_attr_lpfc_hba_queue_depth,
+	&class_device_attr_lpfc_peer_port_login,
+	&class_device_attr_lpfc_vport_restrict_login,
 	&class_device_attr_lpfc_nodev_tmo,
 	&class_device_attr_lpfc_devloss_tmo,
 	&class_device_attr_lpfc_fcp_class,
@@ -1161,6 +1361,13 @@ struct class_device_attribute *lpfc_hba_attrs[] = {
 	&class_device_attr_nport_evt_cnt,
 	&class_device_attr_management_version,
 	&class_device_attr_board_mode,
+	&class_device_attr_max_vpi,
+	&class_device_attr_used_vpi,
+	&class_device_attr_max_rpi,
+	&class_device_attr_used_rpi,
+	&class_device_attr_max_xri,
+	&class_device_attr_used_xri,
+	&class_device_attr_npiv_info,
 	&class_device_attr_issue_reset,
 	&class_device_attr_lpfc_poll,
 	&class_device_attr_lpfc_poll_tmo,
@@ -1299,7 +1506,7 @@ sysfs_mbox_write(struct kobject *kobj, char *buf, loff_t off, size_t count)
 	} else {
 		if (phba->sysfs_mbox.state  != SMBOX_WRITING ||
 		    phba->sysfs_mbox.offset != off           ||
-		    phba->sysfs_mbox.mbox   == NULL ) {
+		    phba->sysfs_mbox.mbox   == NULL) {
 			sysfs_mbox_idle(phba);
 			spin_unlock_irq(&phba->hbalock);
 			return -EAGAIN;
@@ -1406,6 +1613,8 @@ sysfs_mbox_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
 			return -EPERM;
 		}
 
+		phba->sysfs_mbox.mbox->vport = vport;
+
 		if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) {
 			sysfs_mbox_idle(phba);
 			spin_unlock_irq(&phba->hbalock);
@@ -1480,12 +1689,12 @@ lpfc_alloc_sysfs_attr(struct lpfc_vport *vport)
 	int error;
 
 	error = sysfs_create_bin_file(&shost->shost_classdev.kobj,
-							&sysfs_ctlreg_attr);
+				      &sysfs_ctlreg_attr);
 	if (error)
 		goto out;
 
 	error = sysfs_create_bin_file(&shost->shost_classdev.kobj,
-							&sysfs_mbox_attr);
+				      &sysfs_mbox_attr);
 	if (error)
 		goto out_remove_ctlreg_attr;
 
@@ -1527,7 +1736,9 @@ lpfc_get_host_port_type(struct Scsi_Host *shost)
 
 	spin_lock_irq(shost->host_lock);
 
-	if (lpfc_is_link_up(phba)) {
+	if (vport->port_type == LPFC_NPIV_PORT) {
+		fc_host_port_type(shost) = FC_PORTTYPE_NPIV;
+	} else if (lpfc_is_link_up(phba)) {
 		if (phba->fc_topology == TOPOLOGY_LOOP) {
 			if (vport->fc_flag & FC_PUBLIC_LOOP)
 				fc_host_port_type(shost) = FC_PORTTYPE_NLPORT;
@@ -1563,6 +1774,7 @@ lpfc_get_host_port_state(struct Scsi_Host *shost)
 			break;
 		case LPFC_LINK_UP:
 		case LPFC_CLEAR_LA:
+		case LPFC_HBA_READY:
 			/* Links up, beyond this port_type reports state */
 			fc_host_port_state(shost) = FC_PORTSTATE_ONLINE;
 			break;
@@ -1644,13 +1856,14 @@ lpfc_get_stats(struct Scsi_Host *shost)
 	unsigned long seconds;
 	int rc = 0;
 
-				/* prevent udev from issuing mailbox commands
-				 * until the port is configured.
-				 */
+	/*
+	 * prevent udev from issuing mailbox commands until the port is
+	 * configured.
+	 */
 	if (phba->link_state < LPFC_LINK_DOWN ||
 	    !phba->mbox_mem_pool ||
 	    (phba->sli.sli_flag & LPFC_SLI2_ACTIVE) == 0)
-			return NULL;
+		return NULL;
 
 	if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)
 		return NULL;
@@ -1664,6 +1877,7 @@ lpfc_get_stats(struct Scsi_Host *shost)
 	pmb->mbxCommand = MBX_READ_STATUS;
 	pmb->mbxOwner = OWN_HOST;
 	pmboxq->context1 = NULL;
+	pmboxq->vport = vport;
 
 	if ((vport->fc_flag & FC_OFFLINE_MODE) ||
 		(!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
@@ -1690,6 +1904,7 @@ lpfc_get_stats(struct Scsi_Host *shost)
 	pmb->mbxCommand = MBX_READ_LNK_STAT;
 	pmb->mbxOwner = OWN_HOST;
 	pmboxq->context1 = NULL;
+	pmboxq->vport = vport;
 
 	if ((vport->fc_flag & FC_OFFLINE_MODE) ||
 	    (!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
@@ -1701,7 +1916,7 @@ lpfc_get_stats(struct Scsi_Host *shost)
 		if (rc == MBX_TIMEOUT)
 			pmboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
 		else
-			mempool_free( pmboxq, phba->mbox_mem_pool);
+			mempool_free(pmboxq, phba->mbox_mem_pool);
 		return NULL;
 	}
 
@@ -1769,6 +1984,7 @@ lpfc_reset_stats(struct Scsi_Host *shost)
 	pmb->mbxOwner = OWN_HOST;
 	pmb->un.varWords[0] = 0x1; /* reset request */
 	pmboxq->context1 = NULL;
+	pmboxq->vport = vport;
 
 	if ((vport->fc_flag & FC_OFFLINE_MODE) ||
 		(!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
@@ -1788,6 +2004,7 @@ lpfc_reset_stats(struct Scsi_Host *shost)
 	pmb->mbxCommand = MBX_READ_LNK_STAT;
 	pmb->mbxOwner = OWN_HOST;
 	pmboxq->context1 = NULL;
+	pmboxq->vport = vport;
 
 	if ((vport->fc_flag & FC_OFFLINE_MODE) ||
 	    (!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
@@ -1950,6 +2167,69 @@ struct fc_function_template lpfc_transport_functions = {
 	.issue_fc_host_lip = lpfc_issue_lip,
 	.dev_loss_tmo_callbk = lpfc_dev_loss_tmo_callbk,
 	.terminate_rport_io = lpfc_terminate_rport_io,
+
+	.vport_create = lpfc_vport_create,
+	.vport_delete = lpfc_vport_delete,
+	.dd_fcvport_size = sizeof(struct lpfc_vport *),
+};
+
+struct fc_function_template lpfc_vport_transport_functions = {
+	/* fixed attributes the driver supports */
+	.show_host_node_name = 1,
+	.show_host_port_name = 1,
+	.show_host_supported_classes = 1,
+	.show_host_supported_fc4s = 1,
+	.show_host_supported_speeds = 1,
+	.show_host_maxframe_size = 1,
+
+	/* dynamic attributes the driver supports */
+	.get_host_port_id = lpfc_get_host_port_id,
+	.show_host_port_id = 1,
+
+	.get_host_port_type = lpfc_get_host_port_type,
+	.show_host_port_type = 1,
+
+	.get_host_port_state = lpfc_get_host_port_state,
+	.show_host_port_state = 1,
+
+	/* active_fc4s is shown but doesn't change (thus no get function) */
+	.show_host_active_fc4s = 1,
+
+	.get_host_speed = lpfc_get_host_speed,
+	.show_host_speed = 1,
+
+	.get_host_fabric_name = lpfc_get_host_fabric_name,
+	.show_host_fabric_name = 1,
+
+	/*
+	 * The LPFC driver treats linkdown handling as target loss events
+	 * so there are no sysfs handlers for link_down_tmo.
+	 */
+
+	.get_fc_host_stats = lpfc_get_stats,
+	.reset_fc_host_stats = lpfc_reset_stats,
+
+	.dd_fcrport_size = sizeof(struct lpfc_rport_data),
+	.show_rport_maxframe_size = 1,
+	.show_rport_supported_classes = 1,
+
+	.set_rport_dev_loss_tmo = lpfc_set_rport_loss_tmo,
+	.show_rport_dev_loss_tmo = 1,
+
+	.get_starget_port_id  = lpfc_get_starget_port_id,
+	.show_starget_port_id = 1,
+
+	.get_starget_node_name = lpfc_get_starget_node_name,
+	.show_starget_node_name = 1,
+
+	.get_starget_port_name = lpfc_get_starget_port_name,
+	.show_starget_port_name = 1,
+
+	.issue_fc_host_lip = lpfc_issue_lip,
+	.dev_loss_tmo_callbk = lpfc_dev_loss_tmo_callbk,
+	.terminate_rport_io = lpfc_terminate_rport_io,
+
+	.vport_disable = lpfc_vport_disable,
 };
 
 void
@@ -1972,6 +2252,8 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
 	lpfc_discovery_threads_init(phba, lpfc_discovery_threads);
 	lpfc_max_luns_init(phba, lpfc_max_luns);
 	lpfc_poll_tmo_init(phba, lpfc_poll_tmo);
+	lpfc_peer_port_login_init(phba, lpfc_peer_port_login);
+	lpfc_vport_restrict_login_init(phba, lpfc_vport_restrict_login);
 	lpfc_use_msi_init(phba, lpfc_use_msi);
 	lpfc_devloss_tmo_init(phba, lpfc_devloss_tmo);
 	lpfc_nodev_tmo_init(phba, lpfc_nodev_tmo);
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 77693072705..94e78819956 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -28,15 +28,18 @@ int lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb,
 void lpfc_clear_la(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_issue_clear_la(struct lpfc_hba *phba, struct lpfc_vport *vport);
 void lpfc_config_link(struct lpfc_hba *, LPFC_MBOXQ_t *);
-int lpfc_read_sparam(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_read_sparam(struct lpfc_hba *, LPFC_MBOXQ_t *, int);
 void lpfc_read_config(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_read_lnk_stat(struct lpfc_hba *, LPFC_MBOXQ_t *);
-int lpfc_reg_login(struct lpfc_hba *, uint32_t, uint8_t *, LPFC_MBOXQ_t *,
-		   uint32_t);
-void lpfc_unreg_login(struct lpfc_hba *, uint32_t, LPFC_MBOXQ_t *);
-void lpfc_unreg_did(struct lpfc_hba *, uint32_t, LPFC_MBOXQ_t *);
+int lpfc_reg_login(struct lpfc_hba *, uint16_t, uint32_t, uint8_t *,
+		   LPFC_MBOXQ_t *, uint32_t);
+void lpfc_unreg_login(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
+void lpfc_unreg_did(struct lpfc_hba *, uint16_t,