Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc general cleanups from Olof Johansson:
 "This is a large branch that contains a handful of different cleanups:

   - Fixing up the I/O space remapping on PCI on ARM.  This is a series
     from Rob Herring that restructures how all pci devices allocate I/O
     space, and it's part of the work to allow multiplatform kernels.
   - A number of cleanup series for OMAP, moving and removing some
     headers, sparse irq rework and in general preparation for
     multiplatform.
   - Final removal of all non-DT boards for Tegra, it is now
     device-tree-only!
   - Removal of a stale platform, nxp4008.  It's an old mobile chipset
     that is no longer in use, and was very likely never really used
     with a mainline kernel.  We have not been able to find anyone
     interested in keeping it around in the kernel.
   - Removal of the legacy dmaengine driver on tegra

  + A handful of other things that I haven't described above."

Fix up some conflicts with the staging tree (and because nxp4008 was
removed)

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits)
  ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6
  ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus
  ARM: mmp: using for_each_set_bit to simplify the code
  ARM: tegra: harmony: fix ldo7 regulator-name
  ARM: OMAP2+: Make omap4-keypad.h local
  ARM: OMAP2+: Make l4_3xxx.h local
  ARM: OMAP2+: Make l4_2xxx.h local
  ARM: OMAP2+: Make l3_3xxx.h local
  ARM: OMAP2+: Make l3_2xxx.h local
  ARM: OMAP1: Move irda.h from plat to mach
  ARM: OMAP2+: Make hdq1w.h local
  ARM: OMAP2+: Make gpmc-smsc911x.h local
  ARM: OMAP2+: Make gpmc-smc91x.h local
  ARM: OMAP1: Move flash.h from plat to mach
  ARM: OMAP2+: Make debug-devices.h local
  ARM: OMAP1: Move board-voiceblue.h from plat to mach
  ARM: OMAP1: Move board-sx1.h from plat to mach
  ARM: OMAP2+: Make omap-wakeupgen.h local
  ARM: OMAP2+: Make omap-secure.h local
  ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local
  ...

56 files changed, 547 insertions, 758 deletions

diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
index ae056182613..2e166277766 100644
--- a/drivers/dma/omap-dma.c
+++ b/drivers/dma/omap-dma.c
@@ -18,6 +18,8 @@
 #include <linux/spinlock.h>
 
 #include "virt-dma.h"
+
+#include <plat/cpu.h>
 #include <plat/dma.h>
 
 struct omap_dmadev {
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 0725d181581..94cbc842fbc 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -25,11 +25,9 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/irqdomain.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/irqs.h>
-#include <asm/gpio.h>
 #include <asm/mach/irq.h>
 
 #define OFF_MODE	1
@@ -385,13 +383,16 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio,
 static int gpio_irq_type(struct irq_data *d, unsigned type)
 {
 	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-	unsigned gpio;
+	unsigned gpio = 0;
 	int retval;
 	unsigned long flags;
 
-	if (!cpu_class_is_omap2() && d->irq > IH_MPUIO_BASE)
+#ifdef CONFIG_ARCH_OMAP1
+	if (d->irq > IH_MPUIO_BASE)
 		gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
-	else
+#endif
+
+	if (!gpio)
 		gpio = irq_to_gpio(bank, d->irq);
 
 	if (type & ~IRQ_TYPE_SENSE_MASK)
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index ba126cc0407..1c169324e35 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -3131,46 +3131,6 @@ samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
 }
 EXPORT_SYMBOL(s3c_gpio_getpull);
 
-/* gpiolib wrappers until these are totally eliminated */
-
-void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
-{
-	int ret;
-
-	WARN_ON(to);	/* should be none of these left */
-
-	if (!to) {
-		/* if pull is enabled, try first with up, and if that
-		 * fails, try using down */
-
-		ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP);
-		if (ret)
-			s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN);
-	} else {
-		s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE);
-	}
-}
-EXPORT_SYMBOL(s3c2410_gpio_pullup);
-
-void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
-{
-	/* do this via gpiolib until all users removed */
-
-	gpio_request(pin, "temporary");
-	gpio_set_value(pin, to);
-	gpio_free(pin);
-}
-EXPORT_SYMBOL(s3c2410_gpio_setpin);
-
-unsigned int s3c2410_gpio_getpin(unsigned int pin)
-{
-	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
-	unsigned long offs = pin - chip->chip.base;
-
-	return __raw_readl(chip->base + 0x04) & (1 << offs);
-}
-EXPORT_SYMBOL(s3c2410_gpio_getpin);
-
 #ifdef CONFIG_S5P_GPIO_DRVSTR
 s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
 {
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index dc5184d5789..d982593d756 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -30,9 +30,6 @@
 
 #include <asm/mach/irq.h>
 
-#include <mach/iomap.h>
-#include <mach/suspend.h>
-
 #define GPIO_BANK(x)		((x) >> 5)
 #define GPIO_PORT(x)		(((x) >> 3) & 0x3)
 #define GPIO_BIT(x)		((x) & 0x7)
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index 94256fe7bf3..f030880bc9b 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -51,6 +51,7 @@
 
 
 static struct gpio_chip twl_gpiochip;
+static int twl4030_gpio_base;
 static int twl4030_gpio_irq_base;
 
 /* genirq interfaces are not available to modules */
@@ -428,8 +429,6 @@ no_irqs:
 	twl_gpiochip.dev = &pdev->dev;
 
 	if (pdata) {
-		twl_gpiochip.base = pdata->gpio_base;
-
 		/*
 		 * NOTE:  boards may waste power if they don't set pullups
 		 * and pulldowns correctly ... default for non-ULPI pins is
@@ -461,15 +460,21 @@ no_irqs:
 		dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret);
 		twl_gpiochip.ngpio = 0;
 		gpio_twl4030_remove(pdev);
-	} else if (pdata && pdata->setup) {
+		goto out;
+	}
+
+	twl4030_gpio_base = twl_gpiochip.base;
+
+	if (pdata && pdata->setup) {
 		int status;
 
 		status = pdata->setup(&pdev->dev,
-				pdata->gpio_base, TWL4030_GPIO_MAX);
+				twl4030_gpio_base, TWL4030_GPIO_MAX);
 		if (status)
 			dev_dbg(&pdev->dev, "setup --> %d\n", status);
 	}
 
+out:
 	return ret;
 }
 
@@ -481,7 +486,7 @@ static int gpio_twl4030_remove(struct platform_device *pdev)
 
 	if (pdata && pdata->teardown) {
 		status = pdata->teardown(&pdev->dev,
-				pdata->gpio_base, TWL4030_GPIO_MAX);
+				twl4030_gpio_base, TWL4030_GPIO_MAX);
 		if (status) {
 			dev_dbg(&pdev->dev, "teardown --> %d\n", status);
 			return status;
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 970a1612e79..42d9fdd63de 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -551,7 +551,7 @@ config I2C_PMCMSP
 
 config I2C_PNX
 	tristate "I2C bus support for Philips PNX and NXP LPC targets"
-	depends on ARCH_PNX4008 || ARCH_LPC32XX
+	depends on ARCH_LPC32XX
 	help
 	  This driver supports the Philips IP3204 I2C IP block master and/or
 	  slave controller
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 93f147a96b6..2f99613fd67 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -4,13 +4,13 @@
 /* Copyright (C) 2003 Peter Milne, D-TACQ Solutions Ltd
  *                    <Peter dot Milne at D hyphen TACQ dot com>
  *
- * With acknowledgements to i2c-algo-ibm_ocp.c by 
+ * With acknowledgements to i2c-algo-ibm_ocp.c by
  * Ian DaSilva, MontaVista Software, Inc. idasilva@mvista.com
  *
  * And i2c-algo-pcf.c, which was created by Simon G. Vogl and Hans Berglund:
  *
  * Copyright (C) 1995-1997 Simon G. Vogl, 1998-2000 Hans Berglund
- *  
+ *
  * And which acknowledged Kyösti Mälkki <kmalkki@cc.hut.fi>,
  * Frodo Looijaard <frodol@dds.nl>, Martin Bailey<mbailey@littlefeet-inc.com>
  *
@@ -39,14 +39,15 @@
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 
 #include "i2c-iop3xx.h"
 
 /* global unit counter */
 static int i2c_id;
 
-static inline unsigned char 
-iic_cook_addr(struct i2c_msg *msg) 
+static inline unsigned char
+iic_cook_addr(struct i2c_msg *msg)
 {
 	unsigned char addr;
 
@@ -55,38 +56,38 @@ iic_cook_addr(struct i2c_msg *msg)
 	if (msg->flags & I2C_M_RD)
 		addr |= 1;
 
-	return addr;   
+	return addr;
 }
 
-static void 
+static void
 iop3xx_i2c_reset(struct i2c_algo_iop3xx_data *iop3xx_adap)
 {
 	/* Follows devman 9.3 */
 	__raw_writel(IOP3XX_ICR_UNIT_RESET, iop3xx_adap->ioaddr + CR_OFFSET);
 	__raw_writel(IOP3XX_ISR_CLEARBITS, iop3xx_adap->ioaddr + SR_OFFSET);
 	__raw_writel(0, iop3xx_adap->ioaddr + CR_OFFSET);
-} 
+}
 
-static void 
+static void
 iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap)
 {
 	u32 cr = IOP3XX_ICR_GCD | IOP3XX_ICR_SCLEN | IOP3XX_ICR_UE;
 
-	/* 
+	/*
 	 * Every time unit enable is asserted, GPOD needs to be cleared
 	 * on IOP3XX to avoid data corruption on the bus.
 	 */
 #if defined(CONFIG_ARCH_IOP32X) || defined(CONFIG_ARCH_IOP33X)
 	if (iop3xx_adap->id == 0) {
-		gpio_line_set(IOP3XX_GPIO_LINE(7), GPIO_LOW);
-		gpio_line_set(IOP3XX_GPIO_LINE(6), GPIO_LOW);
+		gpio_set_value(7, 0);
+		gpio_set_value(6, 0);
 	} else {
-		gpio_line_set(IOP3XX_GPIO_LINE(5), GPIO_LOW);
-		gpio_line_set(IOP3XX_GPIO_LINE(4), GPIO_LOW);
+		gpio_set_value(5, 0);
+		gpio_set_value(4, 0);
 	}
 #endif
 	/* NB SR bits not same position as CR IE bits :-( */
-	iop3xx_adap->SR_enabled = 
+	iop3xx_adap->SR_enabled =
 		IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD |
 		IOP3XX_ISR_RXFULL | IOP3XX_ISR_TXEMPTY;
 
@@ -96,23 +97,23 @@ iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap)
 	__raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
 }
 
-static void 
+static void
 iop3xx_i2c_transaction_cleanup(struct i2c_algo_iop3xx_data *iop3xx_adap)
 {
 	unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
-	
-	cr &= ~(IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE | 
+
+	cr &= ~(IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE |
 		IOP3XX_ICR_MSTOP | IOP3XX_ICR_SCLEN);
 
 	__raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
 }
 
-/* 
- * NB: the handler has to clear the source of the interrupt! 
+/*
+ * NB: the handler has to clear the source of the interrupt!
  * Then it passes the SR flags of interest to BH via adap data
  */
-static irqreturn_t 
-iop3xx_i2c_irq_handler(int this_irq, void *dev_id) 
+static irqreturn_t
+iop3xx_i2c_irq_handler(int this_irq, void *dev_id)
 {
 	struct i2c_algo_iop3xx_data *iop3xx_adap = dev_id;
 	u32 sr = __raw_readl(iop3xx_adap->ioaddr + SR_OFFSET);
@@ -126,7 +127,7 @@ iop3xx_i2c_irq_handler(int this_irq, void *dev_id)
 }
 
 /* check all error conditions, clear them , report most important */
-static int 
+static int
 iop3xx_i2c_error(u32 sr)
 {
 	int rc = 0;
@@ -135,12 +136,12 @@ iop3xx_i2c_error(u32 sr)
 		if ( !rc ) rc = -I2C_ERR_BERR;
 	}
 	if ((sr & IOP3XX_ISR_ALD)) {
-		if ( !rc ) rc = -I2C_ERR_ALD;		
+		if ( !rc ) rc = -I2C_ERR_ALD;
 	}
-	return rc;	
+	return rc;
 }
 
-static inline u32 
+static inline u32
 iop3xx_i2c_get_srstat(struct i2c_algo_iop3xx_data *iop3xx_adap)
 {
 	unsigned long flags;
@@ -161,8 +162,8 @@ iop3xx_i2c_get_srstat(struct i2c_algo_iop3xx_data *iop3xx_adap)
 typedef int (* compare_func)(unsigned test, unsigned mask);
 /* returns 1 on correct comparison */
 
-static int 
-iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap, 
+static int
+iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap,
 			  unsigned flags, unsigned* status,
 			  compare_func compare)
 {
@@ -192,47 +193,47 @@ iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap,
 }
 
 /*
- * Concrete compare_funcs 
+ * Concrete compare_funcs
  */
-static int 
+static int
 all_bits_clear(unsigned test, unsigned mask)
 {
 	return (test & mask) == 0;
 }
 
-static int 
+static int
 any_bits_set(unsigned test, unsigned mask)
 {
 	return (test & mask) != 0;
 }
 
-static int 
+static int
 iop3xx_i2c_wait_tx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
 {
-	return iop3xx_i2c_wait_event( 
-		iop3xx_adap, 
+	return iop3xx_i2c_wait_event(
+		iop3xx_adap,
 	        IOP3XX_ISR_TXEMPTY | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD,
 		status, any_bits_set);
 }
 
-static int 
+static int
 iop3xx_i2c_wait_rx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
 {
-	return iop3xx_i2c_wait_event( 
-		iop3xx_adap, 
+	return iop3xx_i2c_wait_event(
+		iop3xx_adap,
 		IOP3XX_ISR_RXFULL | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD,
 		status,	any_bits_set);
 }
 
-static int 
+static int
 iop3xx_i2c_wait_idle(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
 {
-	return iop3xx_i2c_wait_event( 
+	return iop3xx_i2c_wait_event(
 		iop3xx_adap, IOP3XX_ISR_UNITBUSY, status, all_bits_clear);
 }
 
-static int 
-iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap, 
+static int
+iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap,
 				struct i2c_msg* msg)
 {
 	unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
@@ -247,7 +248,7 @@ iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap,
 	}
 
 	__raw_writel(iic_cook_addr(msg), iop3xx_adap->ioaddr + DBR_OFFSET);
-	
+
 	cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK);
 	cr |= IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE;
 
@@ -257,8 +258,8 @@ iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap,
 	return rc;
 }
 
-static int 
-iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char byte, 
+static int
+iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char byte,
 				int stop)
 {
 	unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
@@ -277,10 +278,10 @@ iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char byte,
 	rc = iop3xx_i2c_wait_tx_done(iop3xx_adap, &status);
 
 	return rc;
-} 
+}
 
-static int 
-iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char* byte, 
+static int
+iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char* byte,
 				int stop)
 {
 	unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
@@ -304,19 +305,19 @@ iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char* byte,
 	return rc;
 }
 
-static int 
+static int
 iop3xx_i2c_writebytes(struct i2c_adapter *i2c_adap, const char *buf, int count)
 {
 	struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
 	int ii;
 	int rc = 0;
 
-	for (ii = 0; rc == 0 && ii != count; ++ii) 
+	for (ii = 0; rc == 0 && ii != count; ++ii)
 		rc = iop3xx_i2c_write_byte(iop3xx_adap, buf[ii], ii==count-1);
 	return rc;
 }
 
-static int 
+static int
 iop3xx_i2c_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count)
 {
 	struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
@@ -325,7 +326,7 @@ iop3xx_i2c_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count)
 
 	for (ii = 0; rc == 0 && ii != count; ++ii)
 		rc = iop3xx_i2c_read_byte(iop3xx_adap, &buf[ii], ii==count-1);
-	
+
 	return rc;
 }
 
@@ -336,8 +337,8 @@ iop3xx_i2c_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count)
  * Each transfer (i.e. a read or a write) is separated by a repeated start
  * condition.
  */
-static int 
-iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg) 
+static int
+iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg)
 {
 	struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
 	int rc;
@@ -357,8 +358,8 @@ iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg)
 /*
  * master_xfer() - main read/write entry
  */
-static int 
-iop3xx_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, 
+static int
+iop3xx_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
 				int num)
 {
 	struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
@@ -375,14 +376,14 @@ iop3xx_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
 	}
 
 	iop3xx_i2c_transaction_cleanup(iop3xx_adap);
-	
+
 	if(ret)
 		return ret;
 
-	return im;   
+	return im;
 }
 
-static u32 
+static u32
 iop3xx_i2c_func(struct i2c_adapter *adap)
 {
 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
@@ -393,11 +394,11 @@ static const struct i2c_algorithm iop3xx_i2c_algo = {
 	.functionality	= iop3xx_i2c_func,
 };
 
-static int 
+static int
 iop3xx_i2c_remove(struct platform_device *pdev)
 {
 	struct i2c_adapter *padapter = platform_get_drvdata(pdev);
-	struct i2c_algo_iop3xx_data *adapter_data = 
+	struct i2c_algo_iop3xx_data *adapter_data =
 		(struct i2c_algo_iop3xx_data *)padapter->algo_data;
 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	unsigned long cr = __raw_readl(adapter_data->ioaddr + CR_OFFSET);
@@ -419,7 +420,7 @@ iop3xx_i2c_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static int 
+static int
 iop3xx_i2c_probe(struct platform_device *pdev)
 {
 	struct resource *res;
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index c50fa75416f..b4b65af8612 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -533,7 +533,7 @@ config KEYBOARD_DAVINCI
 
 config KEYBOARD_OMAP
 	tristate "TI OMAP keypad support"
-	depends on (ARCH_OMAP1 || ARCH_OMAP2)
+	depends on ARCH_OMAP1
 	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use the OMAP keypad.
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index a0222db4dc8..6d6b1427ae1 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -35,13 +35,9 @@
 #include <linux/mutex.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
-#include <asm/gpio.h>
-#include <plat/keypad.h>
-#include <plat/menelaus.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/io.h>
-#include <plat/mux.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/keypad-omap.h>
 
 #undef NEW_BOARD_LEARNING_MODE
 
@@ -96,28 +92,8 @@ static u8 get_row_gpio_val(struct omap_kp *omap_kp)
 
 static irqreturn_t omap_kp_interrupt(int irq, void *dev_id)
 {
-	struct omap_kp *omap_kp = dev_id;
-
 	/* disable keyboard interrupt and schedule for handling */
-	if (cpu_is_omap24xx()) {
-		int i;
-
-		for (i = 0; i < omap_kp->rows; i++) {
-			int gpio_irq = gpio_to_irq(row_gpios[i]);
-			/*
-			 * The interrupt which we're currently handling should
-			 * be disabled _nosync() to avoid deadlocks waiting
-			 * for this handler to complete.  All others should
-			 * be disabled the regular way for SMP safety.
-			 */
-			if (gpio_irq == irq)
-				disable_irq_nosync(gpio_irq);
-			else
-				disable_irq(gpio_irq);
-		}
-	} else
-		/* disable keyboard interrupt and schedule for handling */
-		omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+	omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 
 	tasklet_schedule(&kp_tasklet);
 
@@ -133,33 +109,22 @@ static void omap_kp_scan_keypad(struct omap_kp *omap_kp, unsigned char *state)
 {
 	int col = 0;
 
-	/* read the keypad status */
-	if (cpu_is_omap24xx()) {
-		/* read the keypad status */
-		for (col = 0; col < omap_kp->cols; col++) {
-			set_col_gpio_val(omap_kp, ~(1 << col));
-			state[col] = ~(get_row_gpio_val(omap_kp)) & 0xff;
-		}
-		set_col_gpio_val(omap_kp, 0);
-
-	} else {
-		/* disable keyboard interrupt and schedule for handling */
-		omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+	/* disable keyboard interrupt and schedule for handling */
+	omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 
-		/* read the keypad status */
-		omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
-		for