[SCSI] remove the obsolete SCSI qlogicisp driver

The SCSI qlogicisp driver is both marked BROKEN and superseded by the
qla1280 driver.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

5 files changed, 0 insertions, 4000 deletions

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index afeca325b4d..84c42c44e04 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1295,27 +1295,6 @@ config SCSI_QLOGIC_FAS
 	  To compile this driver as a module, choose M here: the
 	  module will be called qlogicfas.
 
-config SCSI_QLOGIC_ISP
-	tristate "Qlogic ISP SCSI support (old driver)"
-	depends on PCI && SCSI && BROKEN
-	---help---
-	  This driver works for all QLogic PCI SCSI host adapters (IQ-PCI,
-	  IQ-PCI-10, IQ_PCI-D) except for the PCI-basic card.  (This latter
-	  card is supported by the "AM53/79C974 PCI SCSI" driver.)
-
-	  If you say Y here, make sure to choose "BIOS" at the question "PCI
-	  access mode".
-
-	  Please read the file <file:Documentation/scsi/qlogicisp.txt>.  You
-	  should also read the SCSI-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called qlogicisp.
-
-	  These days the hardware is also supported by the more modern qla1280
-	  driver.  In doubt use that one instead of qlogicisp.
-
 config SCSI_QLOGIC_FC
 	tristate "Qlogic ISP FC SCSI support"
 	depends on PCI && SCSI
@@ -1342,14 +1321,6 @@ config SCSI_QLOGIC_1280
 	  To compile this driver as a module, choose M here: the
 	  module will be called qla1280.
 
-config SCSI_QLOGIC_1280_1040
-	bool "Qlogic QLA 1020/1040 SCSI support"
-	depends on SCSI_QLOGIC_1280 && SCSI_QLOGIC_ISP!=y
-	help
-	  Say Y here if you have a QLogic ISP1020/1040 SCSI host adapter and
-	  do not want to use the old driver.  This option enables support in
-	  the qla1280 driver for those host adapters.
-
 config SCSI_QLOGICPTI
 	tristate "PTI Qlogic, ISP Driver"
 	depends on SBUS && SCSI
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index b88b8c45559..f062ea0f813 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -78,7 +78,6 @@ obj-$(CONFIG_SCSI_NCR_Q720)	+= NCR_Q720_mod.o
 obj-$(CONFIG_SCSI_SYM53C416)	+= sym53c416.o
 obj-$(CONFIG_SCSI_QLOGIC_FAS)	+= qlogicfas408.o	qlogicfas.o
 obj-$(CONFIG_PCMCIA_QLOGIC)	+= qlogicfas408.o
-obj-$(CONFIG_SCSI_QLOGIC_ISP)	+= qlogicisp.o 
 obj-$(CONFIG_SCSI_QLOGIC_FC)	+= qlogicfc.o 
 obj-$(CONFIG_SCSI_QLOGIC_1280)	+= qla1280.o 
 obj-$(CONFIG_SCSI_QLA2XXX)	+= qla2xxx/
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 637fb6565d2..cc7593b97de 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -639,10 +639,8 @@ struct qla_boards {
 static struct pci_device_id qla1280_pci_tbl[] = {
 	{PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP12160,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-#ifdef CONFIG_SCSI_QLOGIC_1280_1040
 	{PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1020,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
-#endif
 	{PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1080,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
 	{PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1240,
diff --git a/drivers/scsi/qlogicisp.c b/drivers/scsi/qlogicisp.c
deleted file mode 100644
index 6c9266b8ffd..00000000000
--- a/drivers/scsi/qlogicisp.c
+++ /dev/null
@@ -1,1934 +0,0 @@
-/*
- * QLogic ISP1020 Intelligent SCSI Processor Driver (PCI)
- * Written by Erik H. Moe, ehm@cris.com
- * Copyright 1995, Erik H. Moe
- * Copyright 1996, 1997  Michael A. Griffith <grif@acm.org>
- * Copyright 2000, Jayson C. Vantuyl <vantuyl@csc.smsu.edu>
- *             and Bryon W. Roche    <bryon@csc.smsu.edu>
- *
- * 64-bit addressing added by Kanoj Sarcar <kanoj@sgi.com>
- * 			   and Leo Dagum    <dagum@sgi.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-#include <linux/blkdev.h>
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/unistd.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/byteorder.h>
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-
-/*
- * With the qlogic interface, every queue slot can hold a SCSI
- * command with up to 4 scatter/gather entries.  If we need more
- * than 4 entries, continuation entries can be used that hold
- * another 7 entries each.  Unlike for other drivers, this means
- * that the maximum number of scatter/gather entries we can
- * support at any given time is a function of the number of queue
- * slots available.  That is, host->can_queue and host->sg_tablesize
- * are dynamic and _not_ independent.  This all works fine because
- * requests are queued serially and the scatter/gather limit is
- * determined for each queue request anew.
- */
-#define QLOGICISP_REQ_QUEUE_LEN	63	/* must be power of two - 1 */
-#define QLOGICISP_MAX_SG(ql)	(4 + ((ql) > 0) ? 7*((ql) - 1) : 0)
-
-/* Configuration section *****************************************************/
-
-/* Set the following macro to 1 to reload the ISP1020's firmware.  This is
-   the latest firmware provided by QLogic.  This may be an earlier/later
-   revision than supplied by your board. */
-
-#define RELOAD_FIRMWARE		1
-
-/* Set the following macro to 1 to reload the ISP1020's defaults from nvram.
-   If you are not sure of your settings, leave this alone, the driver will
-   use a set of 'safe' defaults */
-
-#define USE_NVRAM_DEFAULTS	0
-
-/*  Macros used for debugging */
-
-#define DEBUG_ISP1020		0
-#define DEBUG_ISP1020_INTR	0
-#define DEBUG_ISP1020_SETUP	0
-#define TRACE_ISP		0
-
-#define DEFAULT_LOOP_COUNT	1000000
-
-/* End Configuration section *************************************************/
-
-#include <linux/module.h>
-
-#if TRACE_ISP
-
-# define TRACE_BUF_LEN	(32*1024)
-
-struct {
-	u_long		next;
-	struct {
-		u_long		time;
-		u_int		index;
-		u_int		addr;
-		u_char *	name;
-	} buf[TRACE_BUF_LEN];
-} trace;
-
-#define TRACE(w, i, a)						\
-{								\
-	unsigned long flags;					\
-								\
-	trace.buf[trace.next].name  = (w);			\
-	trace.buf[trace.next].time  = jiffies;			\
-	trace.buf[trace.next].index = (i);			\
-	trace.buf[trace.next].addr  = (long) (a);		\
-	trace.next = (trace.next + 1) & (TRACE_BUF_LEN - 1);	\
-}
-
-#else
-# define TRACE(w, i, a)
-#endif
-
-#if DEBUG_ISP1020
-#define ENTER(x)	printk("isp1020 : entering %s()\n", x);
-#define LEAVE(x)	printk("isp1020 : leaving %s()\n", x);
-#define DEBUG(x)	x
-#else
-#define ENTER(x)
-#define LEAVE(x)
-#define DEBUG(x)
-#endif /* DEBUG_ISP1020 */
-
-#if DEBUG_ISP1020_INTR
-#define ENTER_INTR(x)	printk("isp1020 : entering %s()\n", x);
-#define LEAVE_INTR(x)	printk("isp1020 : leaving %s()\n", x);
-#define DEBUG_INTR(x)	x
-#else
-#define ENTER_INTR(x)
-#define LEAVE_INTR(x)
-#define DEBUG_INTR(x)
-#endif /* DEBUG ISP1020_INTR */
-
-#define ISP1020_REV_ID	1
-
-#define MAX_TARGETS	16
-#define MAX_LUNS	8
-
-/* host configuration and control registers */
-#define HOST_HCCR	0xc0	/* host command and control */
-
-/* pci bus interface registers */
-#define PCI_ID_LOW	0x00	/* vendor id */
-#define PCI_ID_HIGH	0x02	/* device id */
-#define ISP_CFG0	0x04	/* configuration register #0 */
-#define  ISP_CFG0_HWMSK  0x000f	/* Hardware revision mask */
-#define  ISP_CFG0_1020	 0x0001 /* ISP1020 */
-#define  ISP_CFG0_1020A	 0x0002 /* ISP1020A */
-#define  ISP_CFG0_1040	 0x0003 /* ISP1040 */
-#define  ISP_CFG0_1040A	 0x0004 /* ISP1040A */
-#define  ISP_CFG0_1040B	 0x0005 /* ISP1040B */
-#define  ISP_CFG0_1040C	 0x0006 /* ISP1040C */
-#define ISP_CFG1	0x06	/* configuration register #1 */
-#define  ISP_CFG1_F128	 0x0040	/* 128-byte FIFO threshold */
-#define  ISP_CFG1_F64	 0x0030	/* 128-byte FIFO threshold */
-#define  ISP_CFG1_F32	 0x0020	/* 128-byte FIFO threshold */
-#define  ISP_CFG1_F16	 0x0010	/* 128-byte FIFO threshold */
-#define  ISP_CFG1_BENAB	 0x0004	/* Global Bus burst enable */
-#define  ISP_CFG1_SXP	 0x0001	/* SXP register select */
-#define PCI_INTF_CTL	0x08	/* pci interface control */
-#define PCI_INTF_STS	0x0a	/* pci interface status */
-#define PCI_SEMAPHORE	0x0c	/* pci semaphore */
-#define PCI_NVRAM	0x0e	/* pci nvram interface */
-#define CDMA_CONF	0x20	/* Command DMA Config */
-#define DDMA_CONF	0x40	/* Data DMA Config */
-#define  DMA_CONF_SENAB	 0x0008	/* SXP to DMA Data enable */
-#define  DMA_CONF_RIRQ	 0x0004	/* RISC interrupt enable */
-#define  DMA_CONF_BENAB	 0x0002	/* Bus burst enable */
-#define  DMA_CONF_DIR	 0x0001	/* DMA direction (0=fifo->host 1=host->fifo) */
-
-/* mailbox registers */
-#define MBOX0		0x70	/* mailbox 0 */
-#define MBOX1		0x72	/* mailbox 1 */
-#define MBOX2		0x74	/* mailbox 2 */
-#define MBOX3		0x76	/* mailbox 3 */
-#define MBOX4		0x78	/* mailbox 4 */
-#define MBOX5		0x7a	/* mailbox 5 */
-#define MBOX6           0x7c    /* mailbox 6 */
-#define MBOX7           0x7e    /* mailbox 7 */
-
-/* mailbox command complete status codes */
-#define MBOX_COMMAND_COMPLETE		0x4000
-#define INVALID_COMMAND			0x4001
-#define HOST_INTERFACE_ERROR		0x4002
-#define TEST_FAILED			0x4003
-#define COMMAND_ERROR			0x4005
-#define COMMAND_PARAM_ERROR		0x4006
-
-/* async event status codes */
-#define ASYNC_SCSI_BUS_RESET		0x8001
-#define SYSTEM_ERROR			0x8002
-#define REQUEST_TRANSFER_ERROR		0x8003
-#define RESPONSE_TRANSFER_ERROR		0x8004
-#define REQUEST_QUEUE_WAKEUP		0x8005
-#define EXECUTION_TIMEOUT_RESET		0x8006
-
-#ifdef CONFIG_QL_ISP_A64
-#define IOCB_SEGS                       2
-#define CONTINUATION_SEGS               5
-#define MAX_CONTINUATION_ENTRIES        254
-#else
-#define IOCB_SEGS                       4
-#define CONTINUATION_SEGS               7
-#endif /* CONFIG_QL_ISP_A64 */
-
-struct Entry_header {
-	u_char	entry_type;
-	u_char	entry_cnt;
-	u_char	sys_def_1;
-	u_char	flags;
-};
-
-/* entry header type commands */
-#ifdef CONFIG_QL_ISP_A64
-#define ENTRY_COMMAND           9
-#define ENTRY_CONTINUATION      0xa
-#else
-#define ENTRY_COMMAND		1
-#define ENTRY_CONTINUATION	2
-#endif /* CONFIG_QL_ISP_A64 */
-
-#define ENTRY_STATUS		3
-#define ENTRY_MARKER		4
-#define ENTRY_EXTENDED_COMMAND	5
-
-/* entry header flag definitions */
-#define EFLAG_CONTINUATION	1
-#define EFLAG_BUSY		2
-#define EFLAG_BAD_HEADER	4
-#define EFLAG_BAD_PAYLOAD	8
-
-struct dataseg {
-	u_int			d_base;
-#ifdef CONFIG_QL_ISP_A64
-	u_int                   d_base_hi;
-#endif
-	u_int			d_count;
-};
-
-struct Command_Entry {
-	struct Entry_header	hdr;
-	u_int			handle;
-	u_char			target_lun;
-	u_char			target_id;
-	u_short			cdb_length;
-	u_short			control_flags;
-	u_short			rsvd;
-	u_short			time_out;
-	u_short			segment_cnt;
-	u_char			cdb[12];
-#ifdef CONFIG_QL_ISP_A64
-	u_int                   rsvd1;
-	u_int                   rsvd2;
-#endif
-	struct dataseg		dataseg[IOCB_SEGS];
-};
-
-/* command entry control flag definitions */
-#define CFLAG_NODISC		0x01
-#define CFLAG_HEAD_TAG		0x02
-#define CFLAG_ORDERED_TAG	0x04
-#define CFLAG_SIMPLE_TAG	0x08
-#define CFLAG_TAR_RTN		0x10
-#define CFLAG_READ		0x20
-#define CFLAG_WRITE		0x40
-
-struct Ext_Command_Entry {
-	struct Entry_header	hdr;
-	u_int			handle;
-	u_char			target_lun;
-	u_char			target_id;
-	u_short			cdb_length;
-	u_short			control_flags;
-	u_short			rsvd;
-	u_short			time_out;
-	u_short			segment_cnt;
-	u_char			cdb[44];
-};
-
-struct Continuation_Entry {
-	struct Entry_header	hdr;
-#ifndef CONFIG_QL_ISP_A64
-	u_int			reserved;
-#endif
-	struct dataseg		dataseg[CONTINUATION_SEGS];
-};
-
-struct Marker_Entry {
-	struct Entry_header	hdr;
-	u_int			reserved;
-	u_char			target_lun;
-	u_char			target_id;
-	u_char			modifier;
-	u_char			rsvd;
-	u_char			rsvds[52];
-};
-
-/* marker entry modifier definitions */
-#define SYNC_DEVICE	0
-#define SYNC_TARGET	1
-#define SYNC_ALL	2
-
-struct Status_Entry {
-	struct Entry_header	hdr;
-	u_int			handle;
-	u_short			scsi_status;
-	u_short			completion_status;
-	u_short			state_flags;
-	u_short			status_flags;
-	u_short			time;
-	u_short			req_sense_len;
-	u_int			residual;
-	u_char			rsvd[8];
-	u_char			req_sense_data[32];
-};
-
-/* status entry completion status definitions */
-#define CS_COMPLETE			0x0000
-#define CS_INCOMPLETE			0x0001
-#define CS_DMA_ERROR			0x0002
-#define CS_TRANSPORT_ERROR		0x0003
-#define CS_RESET_OCCURRED		0x0004
-#define CS_ABORTED			0x0005
-#define CS_TIMEOUT			0x0006
-#define CS_DATA_OVERRUN			0x0007
-#define CS_COMMAND_OVERRUN		0x0008
-#define CS_STATUS_OVERRUN		0x0009
-#define CS_BAD_MESSAGE			0x000a
-#define CS_NO_MESSAGE_OUT		0x000b
-#define CS_EXT_ID_FAILED		0x000c
-#define CS_IDE_MSG_FAILED		0x000d
-#define CS_ABORT_MSG_FAILED		0x000e
-#define CS_REJECT_MSG_FAILED		0x000f
-#define CS_NOP_MSG_FAILED		0x0010
-#define CS_PARITY_ERROR_MSG_FAILED	0x0011
-#define CS_DEVICE_RESET_MSG_FAILED	0x0012
-#define CS_ID_MSG_FAILED		0x0013
-#define CS_UNEXP_BUS_FREE		0x0014
-#define CS_DATA_UNDERRUN		0x0015
-
-/* status entry state flag definitions */
-#define SF_GOT_BUS			0x0100
-#define SF_GOT_TARGET			0x0200
-#define SF_SENT_CDB			0x0400
-#define SF_TRANSFERRED_DATA		0x0800
-#define SF_GOT_STATUS			0x1000
-#define SF_GOT_SENSE			0x2000
-
-/* status entry status flag definitions */
-#define STF_DISCONNECT			0x0001
-#define STF_SYNCHRONOUS			0x0002
-#define STF_PARITY_ERROR		0x0004
-#define STF_BUS_RESET			0x0008
-#define STF_DEVICE_RESET		0x0010
-#define STF_ABORTED			0x0020
-#define STF_TIMEOUT			0x0040
-#define STF_NEGOTIATION			0x0080
-
-/* interface control commands */
-#define ISP_RESET			0x0001
-#define ISP_EN_INT			0x0002
-#define ISP_EN_RISC			0x0004
-
-/* host control commands */
-#define HCCR_NOP			0x0000
-#define HCCR_RESET			0x1000
-#define HCCR_PAUSE			0x2000
-#define HCCR_RELEASE			0x3000
-#define HCCR_SINGLE_STEP		0x4000
-#define HCCR_SET_HOST_INTR		0x5000
-#define HCCR_CLEAR_HOST_INTR		0x6000
-#define HCCR_CLEAR_RISC_INTR		0x7000
-#define HCCR_BP_ENABLE			0x8000
-#define HCCR_BIOS_DISABLE		0x9000
-#define HCCR_TEST_MODE			0xf000
-
-#define RISC_BUSY			0x0004
-
-/* mailbox commands */
-#define MBOX_NO_OP			0x0000
-#define MBOX_LOAD_RAM			0x0001
-#define MBOX_EXEC_FIRMWARE		0x0002
-#define MBOX_DUMP_RAM			0x0003
-#define MBOX_WRITE_RAM_WORD		0x0004
-#define MBOX_READ_RAM_WORD		0x0005
-#define MBOX_MAILBOX_REG_TEST		0x0006
-#define MBOX_VERIFY_CHECKSUM		0x0007
-#define MBOX_ABOUT_FIRMWARE		0x0008
-#define MBOX_CHECK_FIRMWARE		0x000e
-#define MBOX_INIT_REQ_QUEUE		0x0010
-#define MBOX_INIT_RES_QUEUE		0x0011
-#define MBOX_EXECUTE_IOCB		0x0012
-#define MBOX_WAKE_UP			0x0013
-#define MBOX_STOP_FIRMWARE		0x0014
-#define MBOX_ABORT			0x0015
-#define MBOX_ABORT_DEVICE		0x0016
-#define MBOX_ABORT_TARGET		0x0017
-#define MBOX_BUS_RESET			0x0018
-#define MBOX_STOP_QUEUE			0x0019
-#define MBOX_START_QUEUE		0x001a
-#define MBOX_SINGLE_STEP_QUEUE		0x001b
-#define MBOX_ABORT_QUEUE		0x001c
-#define MBOX_GET_DEV_QUEUE_STATUS	0x001d
-#define MBOX_GET_FIRMWARE_STATUS	0x001f
-#define MBOX_GET_INIT_SCSI_ID		0x0020
-#define MBOX_GET_SELECT_TIMEOUT		0x0021
-#define MBOX_GET_RETRY_COUNT		0x0022
-#define MBOX_GET_TAG_AGE_LIMIT		0x0023
-#define MBOX_GET_CLOCK_RATE		0x0024
-#define MBOX_GET_ACT_NEG_STATE		0x0025
-#define MBOX_GET_ASYNC_DATA_SETUP_TIME	0x0026
-#define MBOX_GET_PCI_PARAMS		0x0027
-#define MBOX_GET_TARGET_PARAMS		0x0028
-#define MBOX_GET_DEV_QUEUE_PARAMS	0x0029
-#define MBOX_SET_INIT_SCSI_ID		0x0030
-#define MBOX_SET_SELECT_TIMEOUT		0x0031
-#define MBOX_SET_RETRY_COUNT		0x0032
-#define MBOX_SET_TAG_AGE_LIMIT		0x0033
-#define MBOX_SET_CLOCK_RATE		0x0034
-#define MBOX_SET_ACTIVE_NEG_STATE	0x0035
-#define MBOX_SET_ASYNC_DATA_SETUP_TIME	0x0036
-#define MBOX_SET_PCI_CONTROL_PARAMS	0x0037
-#define MBOX_SET_TARGET_PARAMS		0x0038
-#define MBOX_SET_DEV_QUEUE_PARAMS	0x0039
-#define MBOX_RETURN_BIOS_BLOCK_ADDR	0x0040
-#define MBOX_WRITE_FOUR_RAM_WORDS	0x0041
-#define MBOX_EXEC_BIOS_IOCB		0x0042
-
-#ifdef CONFIG_QL_ISP_A64
-#define MBOX_CMD_INIT_REQUEST_QUEUE_64      0x0052
-#define MBOX_CMD_INIT_RESPONSE_QUEUE_64     0x0053
-#endif /* CONFIG_QL_ISP_A64 */
-
-#include "qlogicisp_asm.c"
-
-#define PACKB(a, b)			(((a)<<4)|(b))
-
-static const u_char mbox_param[] = {
-	PACKB(1, 1),	/* MBOX_NO_OP */
-	PACKB(5, 5),	/* MBOX_LOAD_RAM */
-	PACKB(2, 0),	/* MBOX_EXEC_FIRMWARE */
-	PACKB(5, 5),	/* MBOX_DUMP_RAM */
-	PACKB(3, 3),	/* MBOX_WRITE_RAM_WORD */
-	PACKB(2, 3),	/* MBOX_READ_RAM_WORD */
-	PACKB(6, 6),	/* MBOX_MAILBOX_REG_TEST */
-	PACKB(2, 3),	/* MBOX_VERIFY_CHECKSUM	*/
-	PACKB(1, 3),	/* MBOX_ABOUT_FIRMWARE */
-	PACKB(0, 0),	/* 0x0009 */
-	PACKB(0, 0),	/* 0x000a */
-	PACKB(0, 0),	/* 0x000b */
-	PACKB(0, 0),	/* 0x000c */
-	PACKB(0, 0),	/* 0x000d */
-	PACKB(1, 2),	/* MBOX_CHECK_FIRMWARE */
-	PACKB(0, 0),	/* 0x000f */
-	PACKB(5, 5),	/* MBOX_INIT_REQ_QUEUE */
-	PACKB(6, 6),	/* MBOX_INIT_RES_QUEUE */
-	PACKB(4, 4),	/* MBOX_EXECUTE_IOCB */
-	PACKB(2, 2),	/* MBOX_WAKE_UP	*/
-	PACKB(1, 6),	/* MBOX_STOP_FIRMWARE */
-	PACKB(4, 4),	/* MBOX_ABORT */
-	PACKB(2, 2),	/* MBOX_ABORT_DEVICE */
-	PACKB(3, 3),	/* MBOX_ABORT_TARGET */
-	PACKB(2, 2),	/* MBOX_BUS_RESET */
-	PACKB(2, 3),	/* MBOX_STOP_QUEUE */
-	PACKB(2, 3),	/* MBOX_START_QUEUE */
-	PACKB(2, 3),	/* MBOX_SINGLE_STEP_QUEUE */
-	PACKB(2, 3),	/* MBOX_ABORT_QUEUE */
-	PACKB(2, 4),	/* MBOX_GET_DEV_QUEUE_STATUS */
-	PACKB(0, 0),	/* 0x001e */
-	PACKB(1, 3),	/* MBOX_GET_FIRMWARE_STATUS */
-	PACKB(1, 2),	/* MBOX_GET_INIT_SCSI_ID */
-	PACKB(1, 2),	/* MBOX_GET_SELECT_TIMEOUT */
-	PACKB(1, 3),	/* MBOX_GET_RETRY_COUNT	*/
-	PACKB(1, 2),	/* MBOX_GET_TAG_AGE_LIMIT */
-	PACKB(1, 2),	/* MBOX_GET_CLOCK_RATE */
-	PACKB(1, 2),	/* MBOX_GET_ACT_NEG_STATE */
-	PACKB(1, 2),	/* MBOX_GET_ASYNC_DATA_SETUP_TIME */
-	PACKB(1, 3),	/* MBOX_GET_PCI_PARAMS */
-	PACKB(2, 4),	/* MBOX_GET_TARGET_PARAMS */
-	PACKB(2, 4),	/* MBOX_GET_DEV_QUEUE_PARAMS */
-	PACKB(0, 0),	/* 0x002a */
-	PACKB(0, 0),	/* 0x002b */
-	PACKB(0, 0),	/* 0x002c */
-	PACKB(0, 0),	/* 0x002d */
-	PACKB(0, 0),	/* 0x002e */
-	PACKB(0, 0),	/* 0x002f */
-	PACKB(2, 2),	/* MBOX_SET_INIT_SCSI_ID */
-	PACKB(2, 2),	/* MBOX_SET_SELECT_TIMEOUT */
-	PACKB(3, 3),	/* MBOX_SET_RETRY_COUNT	*/
-	PACKB(2, 2),	/* MBOX_SET_TAG_AGE_LIMIT */
-	PACKB(2, 2),	/* MBOX_SET_CLOCK_RATE */
-	PACKB(2, 2),	/* MBOX_SET_ACTIVE_NEG_STATE */
-	PACKB(2, 2),	/* MBOX_SET_ASYNC_DATA_SETUP_TIME */
-	PACKB(3, 3),	/* MBOX_SET_PCI_CONTROL_PARAMS */
-	PACKB(4, 4),	/* MBOX_SET_TARGET_PARAMS */
-	PACKB(4, 4),	/* MBOX_SET_DEV_QUEUE_PARAMS */
-	PACKB(0, 0),	/* 0x003a */
-	PACKB(0, 0),	/* 0x003b */
-	PACKB(0, 0),	/* 0x003c */
-	PACKB(0, 0),	/* 0x003d */
-	PACKB(0, 0),	/* 0x003e */
-	PACKB(0, 0),	/* 0x003f */
-	PACKB(1, 2),	/* MBOX_RETURN_BIOS_BLOCK_ADDR */
-	PACKB(6, 1),	/* MBOX_WRITE_FOUR_RAM_WORDS */
-	PACKB(2, 3)	/* MBOX_EXEC_BIOS_IOCB */
-#ifdef CONFIG_QL_ISP_A64
-	,PACKB(0, 0),	/* 0x0043 */
-	PACKB(0, 0),	/* 0x0044 */
-	PACKB(0, 0),	/* 0x0045 */
-	PACKB(0, 0),	/* 0x0046 */
-	PACKB(0, 0),	/* 0x0047 */
-	PACKB(0, 0),	/* 0x0048 */
-	PACKB(0, 0),	/* 0x0049 */
-	PACKB(0, 0),	/* 0x004a */
-	PACKB(0, 0),	/* 0x004b */
-	PACKB(0, 0),	/* 0x004c */
-	PACKB(0, 0),	/* 0x004d */
-	PACKB(0, 0),	/* 0x004e */
-	PACKB(0, 0),	/* 0x004f */
-	PACKB(0, 0),	/* 0x0050 */
-	PACKB(0, 0),	/* 0x0051 */
-	PACKB(8, 8),	/* MBOX_CMD_INIT_REQUEST_QUEUE_64 (0x0052) */
-	PACKB(8, 8)	/* MBOX_CMD_INIT_RESPONSE_QUEUE_64 (0x0053) */
-#endif /* CONFIG_QL_ISP_A64 */
-};
-
-#define MAX_MBOX_COMMAND	(sizeof(mbox_param)/sizeof(u_short))
-
-struct host_param {
-	u_short		fifo_threshold;
-	u_short		host_adapter_enable;
-	u_short		initiator_scsi_id;
-	u_short		bus_reset_delay;
-	u_short		retry_count;
-	u_short		retry_delay;
-	u_short		async_data_setup_time;
-	u_short		req_ack_active_negation;
-	u_short		data_line_active_negation;
-	u_short		data_dma_burst_enable;
-	u_short		command_dma_burst_enable;
-	u_short		tag_aging;
-	u_short		selection_timeout;
-	u_short		max_queue_depth;
-};
-
-/*
- * Device Flags:
- *
- * Bit  Name
- * ---------
- *  7   Disconnect Privilege
- *  6   Parity Checking
- *  5   Wide Data Transfers
- *  4   Synchronous Data Transfers
- *  3   Tagged Queuing
- *  2   Automatic Request Sense
- *  1   Stop Queue on Check Condition
- *  0   Renegotiate on Error
- */
-
-struct dev_param {
-	u_short		device_flags;
-	u_short		execution_throttle;
-	u_short		synchronous_period;
-	u_short		synchronous_offset;
-	u_short		device_enable;
-	u_short		reserved; /* pad */
-};
-
-/*
- * The result queue can be quite a bit smaller since continuation entries
- * do not show up there:
- */
-#define RES_QUEUE_LEN		((QLOGICISP_REQ_QUEUE_LEN + 1) / 8 - 1)
-#define QUEUE_ENTRY_LEN		64
-#define QSIZE(entries)  (((entries) + 1) * QUEUE_ENTRY_LEN)
-
-struct isp_queue_entry {
-	char __opaque[QUEUE_ENTRY_LEN];
-};
-
-struct isp1020_hostdata {
-	void __iomem *memaddr;
-	u_char	revision;
-	struct	host_param host_param;
-	struct	dev_param dev_param[MAX_TARGETS];
-	struct	pci_dev *pci_dev;
-	
-	struct isp_queue_entry *res_cpu; /* CPU-side address of response queue. */
-	struct isp_queue_entry *req_cpu; /* CPU-size address of request queue. */
-
-	/* result and request queues (shared with isp1020): */
-	u_int	req_in_ptr;		/* index of next request slot */
-	u_int	res_out_ptr;		/* index of next result slot */
-
-	/* this is here so the queues are nicely aligned */
-	long	send_marker;		/* do we need to send a marker? */
-
-	/* The cmd->handle has a fixed size, and is only 32-bits.  We
-	 * need to take care to handle 64-bit systems correctly thus what
-	 * we actually place in cmd->handle is an index to the following
-	 * table.  Kudos to Matt Jacob for the technique.  -DaveM
-	 */
-	Scsi_Cmnd *cmd_slots[QLOGICISP_REQ_QUEUE_LEN + 1];
-
-	dma_addr_t res_dma;	/* PCI side view of response queue */
-	dma_addr_t req_dma;	/* PCI side view of request queue */
-};
-
-/* queue length's _must_ be power of two: */
-#define QUEUE_DEPTH(in, out, ql)	((in - out) & (ql))
-#define REQ_QUEUE_DEPTH(in, out)	QUEUE_DEPTH(in, out, 		     \
-						    QLOGICISP_REQ_QUEUE_LEN)
-#define RES_QUEUE_DEPTH(in, out)	QUEUE_DEPTH(in, out, RES_QUEUE_LEN)
-
-static void	isp1020_enable_irqs(struct Scsi_Host *);
-static void	isp1020_disable_irqs(struct Scsi_Host *);
-static int	isp1020_init(struct Scsi_Host *);
-static int	isp1020_reset_hardware(struct Scsi_Host *);
-static int	isp1020_set_defaults(struct Scsi_Host *);
-static int	isp1020_load_parameters(struct Scsi_Host *);
-static int	isp1020_mbox_command(struct Scsi_Host *, u_short []); 
-static int	isp1020_return_status(struct Status_Entry *);
-static void	isp1020_intr_handler(int, void *, struct pt_regs *);
-static irqreturn_t do_isp1020_intr_handler(int, void *, struct pt_regs *);
-
-#if USE_NVRAM_DEFAULTS
-static int	isp1020_get_defaults(struct Scsi_Host *);
-static int	isp1020_verify_nvram(struct Scsi_Host *);
-static u_short	isp1020_read_nvram_word(struct Scsi_Host *, u_short);
-#endif
-
-#if DEBUG_ISP1020
-static void	isp1020_print_scsi_cmd(Scsi_Cmnd *);
-#endif
-#if DEBUG_ISP1020_INTR
-static void	isp1020_print_status_entry(struct Status_Entry *);
-#endif
-
-/* memaddr should be used to determine if memmapped port i/o is being used
- * non-null memaddr == mmap'd
- * JV 7-Jan-2000
- */
-static inline u_short isp_inw(struct Scsi_Host *host, long offset)
-{
-	struct isp1020_hostdata *h = (struct isp1020_hostdata *)host->hostdata;
-	if (h->memaddr)
-		return readw(h->memaddr + offset);
-	else
-		return inw(host->io_port + offset);
-}
-
-static inline void isp_outw(u_short val, struct Scsi_Host *host, long offset)
-{
-	struct isp1020_hostdata *h = (struct isp1020_hostdata *)host->hostdata;
-	if (h->memaddr)
-		writew(val, h->memaddr + offset);
-	else
-		outw(val, host->io_port + offset);
-}
-
-static inline void isp1020_enable_irqs(struct Scsi_Host *host)
-{
-	isp_outw(ISP_EN_INT|ISP_EN_RISC, host, PCI_INTF_CTL);
-}
-
-
-static inline void isp1020_disable_irqs(struct Scsi_Host *host)
-{
-	isp_outw(0x0, host, PCI_INTF_CTL);
-}
-
-
-static int isp1020_detect(Scsi_Host_Template *tmpt)
-{
-	int hosts = 0;
-	struct Scsi_Host *host;
-	struct isp1020_hostdata *hostdata;
-	struct pci_dev *pdev = NULL;
-
-	ENTER("isp1020_detect");
-
-	tmpt->proc_name = "isp1020";
-
-	while ((pdev = pci_find_device(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1020, pdev)))
-	{
-		if (pci_enable_device(pdev))
-			continue;
-
-		host = scsi_register(tmpt, sizeof(struct isp1020_hostdata));
-		if (!host)
-			continue;
-
-		hostdata = (struct isp1020_hostdata *) host->hostdata;
-
-		memset(hostdata, 0, sizeof(struct isp1020_hostdata));
-
-		hostdata->pci_dev = pdev;
-
-		if (isp1020_init(host))
-			goto fail_and_unregister;
-
-		if (isp1020_reset_hardware(host)
-#if USE_NVRAM_DEFAULTS
-		    || isp1020_get_defaults(host)
-#else
-		    || isp1020_set_defaults(host)
-#endif /* USE_NVRAM_DEFAULTS */
-		    || isp1020_load_parameters(host)) {
-			goto fail_uninit;
-		}
-
-		host->this_id = hostdata->host_param.initiator_scsi_id;
-		host->max_sectors = 64;
-
-		if (request_irq(host->irq, do_isp1020_intr_handler, SA_INTERRUPT | SA_SHIRQ,
-				"qlogicisp", host))
-		{
-			printk("qlogicisp : interrupt %d already in use\n",
-			       host->irq);
-			goto fail_uninit;
-		}
-
-		isp_outw(0x0, host, PCI_SEMAPHORE);
-		isp_outw(HCCR_CLEAR_RISC_INTR, host, HOST_HCCR);
-		isp1020_enable_irqs(host);
-
-		hosts++;
-		continue;
-
-	fail_uninit:
-		iounmap(hostdata->memaddr);
-		release_region(host->io_port, 0xff);
-	fail_and_unregister:
-		if (hostdata->res_cpu)
-			pci_free_consistent(hostdata->pci_dev,
-					    QSIZE(RES_QUEUE_LEN),
-					    hostdata->res_cpu,
-					    hostdata->res_dma);
-		if (hostdata->req_cpu)
-			pci_free_consistent(hostdata->pci_dev,
-					    QSIZE(QLOGICISP_REQ_QUEUE_LEN),
-					    hostdata->req_cpu,
-					    hostdata->req_dma);
-		scsi_unregister(host);
-	}
-
-	LEAVE("isp1020_detect");
-
-	return hosts;
-}
-
-
-static int isp1020_release(struct Scsi_Host *host)
-{
-	struct isp1020_hostdata *hostdata;
-
-	ENTER("isp1020_release");
-
-	hostdata = (struct isp1020_hostdata *) host->hostdata;
-
-	isp_outw(0x0, host, PCI_INTF_CTL);
-	free_irq(host->irq, host);
-
-	iounmap(hostdata->memaddr);
-
-	release_region(host->io_port, 0xff);
-
-	LEAVE("isp1020_release");
-
-	return 0;
-}
-
-
-static const char *isp1020_info(struct Scsi_Host *host)
-{
-	static char buf[80];
-	struct isp1020_hostdata *hostdata;
-
-	ENTER("isp1020_info");
-
-	hostdata = (struct isp1020_hostdata *) host->hostdata;
-	sprintf(buf,
-		"QLogic ISP1020 SCSI on PCI bus %02x device %02x irq %d %s base 0x%lx",
-		hostdata->pci_dev->bus->number, hostdata->pci_dev->devfn, host->irq,
-		(hostdata->memaddr ? "MEM" : "I/O"),
-		(hostdata->memaddr ? (unsigned long)hostdata->memaddr : host->io_port));
-
-	LEAVE("isp1020_info");
-
-	return buf;
-}
-
-
-/*
- * The middle SCSI layer ensures that queuecommand never gets invoked
- * concurrently with itself or the interrupt handler (though the
- * interrupt handler may call this routine as part of
- * request-completion handling).
- */
-static int isp1020_queuecommand(Scsi_Cmnd *Cmnd, void (*done)(Scsi_Cmnd *))
-{
-	int i, n, num_free;
-	u_int in_ptr, out_ptr;
-	struct dataseg * ds;
-	struct scatterlist *sg;
-	struct Command_Entry *cmd;
-	struct Continuation_Entry *cont;
-	struct Scsi_Host *host;
-	struct isp1020_hostdata *hostdata;
-	dma_addr_t	dma_addr;
-
-	ENTER("isp1020_queuecommand");
-
-	host = Cmnd->device->host;
-	hostdata = (struct isp1020_hostdata *) host->hostdata;
-	Cmnd->scsi_done = done;
-
-	DEBUG(isp1020_print_scsi_cmd(Cmnd));
-
-	out_ptr = isp_inw(host, + MBOX4);
-	in_ptr  = hostdata->req_in_ptr;
-
-	DEBUG(printk("qlogicisp : request queue depth %d\n",
-		     REQ_QUEUE_DEPTH(in_ptr, out_ptr)));
-
-	cmd = (struct Command_Entry *) &hostdata->req_cpu[in_ptr];
-	in_ptr = (in_ptr + 1) & QLOGICISP_REQ_QUEUE_LEN;
-	if (in_ptr == out_ptr) {
-		printk("qlogicisp : request queue overflow\n");
-		return 1;
-	}
-
-	if (hostdata->send_marker) {
-		struct Marker_Entry *marker;
-
-		TRACE("queue marker", in_ptr, 0);
-
-		DEBUG(printk("qlogicisp : adding marker entry\n"));
-		marker = (struct Marker_Entry *) cmd;
-		memset(marker, 0, sizeof(struct Marker_Entry));
-
-		marker->hdr.entry_type = ENTRY_MARKER;
-		marker->hdr.entry_cnt = 1;
-		marker->modifier = SYNC_ALL;
-
-		hostdata->send_marker = 0;
-
-		if (((in_ptr + 1) & QLOGICISP_REQ_QUEUE_LEN) == out_ptr) {
-			isp_outw(in_ptr, host, MBOX4);
-			hostdata->req_in_ptr = in_ptr;
-			printk("qlogicisp : request queue overflow\n");
-			return 1;
-		}
-		cmd = (struct Command_Entry *) &hostdata->req_cpu[in_ptr];
-		in_ptr = (in_ptr + 1) & QLOGICISP_REQ_QUEUE_LEN;
-	}
-
-	TRACE("queue command", in_ptr, Cmnd);
-
-	memset(cmd, 0, sizeof(struct Command_Entry));
-
-	cmd->hdr.entry_type = ENTRY_COMMAND;
-	cmd->hdr.entry_cnt = 1;
-
-	cmd->target_lun = Cmnd->device->lun;
-	cmd->target_id = Cmnd->device->id;
-	cmd->cdb_length = cpu_to_le16(Cmnd->cmd_len);
-	cmd->control_flags = cpu_to_le16(CFLAG_READ | CFLAG_WRITE);
-	cmd->time_out = cpu_to_le16(30);
-
-	memcpy(cmd->cdb, Cmnd->cmnd, Cmnd->cmd_len);
-
-	if (Cmnd->use_sg) {
-		int sg_count;
-
-		sg = (struct scatterlist *) Cmnd->request_buffer;
-		ds = cmd->dataseg;
-
-		sg_count = pci_map_sg(hostdata->pci_dev, sg, Cmnd->use_sg,
-				      Cmnd->sc_data_direction);
-
-		cmd->segment_cnt = cpu_to_le16(sg_count);
-
-		/* fill in first four sg entries: */
-		n = sg_count;
-		if (n > IOCB_SEGS)
-			n = IOCB_SEGS;
-		for (i = 0; i < n; i++) {
-			dma_addr = sg_dma_address(sg);
-			ds[i].d_base  = cpu_to_le32((u32) dma_addr);
-#ifdef CONFIG_QL_ISP_A64
-			ds[i].d_base_hi = cpu_to_le32((u32) (dma_addr>>32));
-#endif /* CONFIG_QL_ISP_A64 */
-			ds[i].d_count = cpu_to_le32(sg_dma_len(sg));
-			++sg;
-		}
-		sg_count -= IOCB_SEGS;
-
-		while (sg_count > 0) {
-			++cmd->hdr.entry_cnt;
-			cont = (struct Continuation_Entry *)
-				&hostdata->req_cpu[in_ptr];
-			in_ptr = (in_ptr + 1) & QLOGICISP_REQ_QUEUE_LEN;
-			if (in_ptr == out_ptr) {
-				printk("isp1020: unexpected request queue "
-				       "overflow\n");
-				return 1;
-			}
-			TRACE("queue continuation", in_ptr, 0);
-			cont->hdr.entry_type = ENTRY_CONTINUATION;
-			cont->hdr.entry_cnt  = 0;
-			cont->hdr.sys_def_1  = 0;
-			cont->hdr.flags      = 0;
-#ifndef CONFIG_QL_ISP_A64
-			cont->reserved = 0;
-#endif
-			ds = cont->dataseg;
-			n = sg_count;
-			if (n > CONTINUATION_SEGS)
-				n = CONTINUATION_SEGS;
-			for (i = 0; i < n; ++i) {
-				dma_addr = sg_dma_address(sg);
-				ds[i].d_base = cpu_to_le32((u32) dma_addr);
-#ifdef CONFIG_QL_ISP_A64
-				ds[i].d_base_hi = cpu_to_le32((u32)(dma_addr>>32));
-#endif /* CONFIG_QL_ISP_A64 */
-				ds[i].d_count = cpu_to_le32(sg_dma_len(sg));
-				++sg;
-			}
-			sg_count -= n;
-		}
-	} else if (Cmnd->request_bufflen) {
-		/*Cmnd->SCp.ptr = (char *)(unsigned long)*/
-		dma_addr = pci_map_single(hostdata->pci_dev,
-				       Cmnd->request_buffer,
-				       Cmnd->request_bufflen,
-				       Cmnd->sc_data_direction);
-		Cmnd->SCp.ptr = (char *)(unsigned long) dma_addr;
-
-		cmd->dataseg[0].d_base =
-			cpu_to_le32((u32) dma_addr);
-#ifdef CONFIG_QL_ISP_A64
-		cmd->dataseg[0].d_base_hi =
-			cpu_to_le32((u32) (dma_addr>>32));
-#endif /* CONFIG_QL_ISP_A64 */
-		cmd->dataseg[0].d_count =
-			cpu_to_le32((u32)Cmnd->request_bufflen);
-		cmd->segment_cnt = cpu_to_le16(1);
-	} else {
-		cmd->dataseg[0].d_base = 0;
-#ifdef CONFIG_QL_ISP_A64
-		cmd->dataseg[0].d_base_hi = 0;
-#endif /* CONFIG_QL_ISP_A64 */
-		cmd->dataseg[0].d_count = 0;
-		cmd->segment_cnt = cpu_to_le16(1); /* Shouldn't this be 0? */
-	}
-
-	/* Committed, record Scsi_Cmd so we can find it later. */
-	cmd->handle = in_ptr;
-	hostdata->cmd_slots[in_ptr] = Cmnd;
-
-	isp_outw(in_ptr, host, MBOX4);
-	hostdata->req_in_ptr = in_ptr;
-
-	num_free = QLOGICISP_REQ_QUEUE_LEN - REQ_QUEUE_DEPTH(in_ptr, out_ptr);
-	host->can_queue = host->host_busy + num_free;
-	host->sg_tablesize = QLOGICISP_MAX_SG(num_free);
-
-	LEAVE("isp1020_queuecommand");
-
-	return 0;
-}
-
-
-#define ASYNC_EVENT_INTERRUPT	0x01
-
-irqreturn_t do_isp1020_intr_handler(int irq, void *dev_id, struct pt_regs *regs)
-{
-	struct Scsi_Host *host = dev_id;
-	unsigned long flags;
-
-	spin_lock_irqsave(host->host_lock, flags);
-	isp1020_intr_handler(irq, dev_id, regs);
-	spin_unlock_irqrestore(host->host_lock, flags);
-
-	return IRQ_HANDLED;
-}
-
-void isp1020_intr_handler(int irq, void *dev_id, struct pt_regs *regs)
-{
-	Scsi_Cmnd *Cmnd;
-	struct Status_Entry *sts;
-	struct Scsi_Host *host = dev_id;
-	struct isp1020_hostdata *hostdata;
-	u_int in_ptr, out_ptr;
-	u_short status;
-