Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: (51 commits)
  PM: Improve error code of pm_notifier_call_chain()
  PM: Add "RTC" to PM trace time stamps to avoid confusion
  PM / Suspend: Export suspend_set_ops, suspend_valid_only_mem
  PM / Suspend: Add .suspend_again() callback to suspend_ops
  PM / OPP: Introduce function to free cpufreq table
  ARM / shmobile: Return -EBUSY from A4LC power off if A3RV is active
  PM / Domains: Take .power_off() error code into account
  ARM / shmobile: Use genpd_queue_power_off_work()
  ARM / shmobile: Use pm_genpd_poweroff_unused()
  PM / Domains: Introduce function to power off all unused PM domains
  OMAP: PM: disable idle on suspend for GPIO and UART
  OMAP: PM: omap_device: add API to disable idle on suspend
  OMAP: PM: omap_device: add system PM methods for PM domain handling
  OMAP: PM: omap_device: conditionally use PM domain runtime helpers
  PM / Runtime: Add new helper function: pm_runtime_status_suspended()
  PM / Domains: Queue up power off work only if it is not pending
  PM / Domains: Improve handling of wakeup devices during system suspend
  PM / Domains: Do not restore all devices on power off error
  PM / Domains: Allow callbacks to execute all runtime PM helpers
  PM / Domains: Do not execute device callbacks under locks
  ...

14 files changed, 1637 insertions, 188 deletions

diff --git a/drivers/base/power/Makefile b/drivers/base/power/Makefile
index 3647e114d0e..2639ae79a37 100644
--- a/drivers/base/power/Makefile
+++ b/drivers/base/power/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_PM_SLEEP)	+= main.o wakeup.o
 obj-$(CONFIG_PM_RUNTIME)	+= runtime.o
 obj-$(CONFIG_PM_TRACE_RTC)	+= trace.o
 obj-$(CONFIG_PM_OPP)	+= opp.o
+obj-$(CONFIG_PM_GENERIC_DOMAINS)	+=  domain.o
 obj-$(CONFIG_HAVE_CLK)	+= clock_ops.o
 
 ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
\ No newline at end of file
diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index ad367c4139b..a846b2f95cf 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -15,9 +15,9 @@
 #include <linux/slab.h>
 #include <linux/err.h>
 
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
 
-struct pm_runtime_clk_data {
+struct pm_clk_data {
 	struct list_head clock_list;
 	struct mutex lock;
 };
@@ -36,25 +36,25 @@ struct pm_clock_entry {
 	enum pce_status status;
 };
 
-static struct pm_runtime_clk_data *__to_prd(struct device *dev)
+static struct pm_clk_data *__to_pcd(struct device *dev)
 {
 	return dev ? dev->power.subsys_data : NULL;
 }
 
 /**
- * pm_runtime_clk_add - Start using a device clock for runtime PM.
- * @dev: Device whose clock is going to be used for runtime PM.
+ * pm_clk_add - Start using a device clock for power management.
+ * @dev: Device whose clock is going to be used for power management.
  * @con_id: Connection ID of the clock.
  *
  * Add the clock represented by @con_id to the list of clocks used for
- * the runtime PM of @dev.
+ * the power management of @dev.
  */
-int pm_runtime_clk_add(struct device *dev, const char *con_id)
+int pm_clk_add(struct device *dev, const char *con_id)
 {
-	struct pm_runtime_clk_data *prd = __to_prd(dev);
+	struct pm_clk_data *pcd = __to_pcd(dev);
 	struct pm_clock_entry *ce;
 
-	if (!prd)
+	if (!pcd)
 		return -EINVAL;
 
 	ce = kzalloc(sizeof(*ce), GFP_KERNEL);
@@ -73,20 +73,20 @@ int pm_runtime_clk_add(struct device *dev, const char *con_id)
 		}
 	}
 
-	mutex_lock(&prd->lock);
-	list_add_tail(&ce->node, &prd->clock_list);
-	mutex_unlock(&prd->lock);
+	mutex_lock(&pcd->lock);
+	list_add_tail(&ce->node, &pcd->clock_list);
+	mutex_unlock(&pcd->lock);
 	return 0;
 }
 
 /**
- * __pm_runtime_clk_remove - Destroy runtime PM clock entry.
- * @ce: Runtime PM clock entry to destroy.
+ * __pm_clk_remove - Destroy PM clock entry.
+ * @ce: PM clock entry to destroy.
  *
- * This routine must be called under the mutex protecting the runtime PM list
- * of clocks corresponding the the @ce's device.
+ * This routine must be called under the mutex protecting the PM list of clocks
+ * corresponding the the @ce's device.
  */
-static void __pm_runtime_clk_remove(struct pm_clock_entry *ce)
+static void __pm_clk_remove(struct pm_clock_entry *ce)
 {
 	if (!ce)
 		return;
@@ -108,95 +108,99 @@ static void __pm_runtime_clk_remove(struct pm_clock_entry *ce)
 }
 
 /**
- * pm_runtime_clk_remove - Stop using a device clock for runtime PM.
- * @dev: Device whose clock should not be used for runtime PM any more.
+ * pm_clk_remove - Stop using a device clock for power management.
+ * @dev: Device whose clock should not be used for PM any more.
  * @con_id: Connection ID of the clock.
  *
  * Remove the clock represented by @con_id from the list of clocks used for
- * the runtime PM of @dev.
+ * the power management of @dev.
  */
-void pm_runtime_clk_remove(struct device *dev, const char *con_id)
+void pm_clk_remove(struct device *dev, const char *con_id)
 {
-	struct pm_runtime_clk_data *prd = __to_prd(dev);
+	struct pm_clk_data *pcd = __to_pcd(dev);
 	struct pm_clock_entry *ce;
 
-	if (!prd)
+	if (!pcd)
 		return;
 
-	mutex_lock(&prd->lock);
+	mutex_lock(&pcd->lock);
 
-	list_for_each_entry(ce, &prd->clock_list, node) {
+	list_for_each_entry(ce, &pcd->clock_list, node) {
 		if (!con_id && !ce->con_id) {
-			__pm_runtime_clk_remove(ce);
+			__pm_clk_remove(ce);
 			break;
 		} else if (!con_id || !ce->con_id) {
 			continue;
 		} else if (!strcmp(con_id, ce->con_id)) {
-			__pm_runtime_clk_remove(ce);
+			__pm_clk_remove(ce);
 			break;
 		}
 	}
 
-	mutex_unlock(&prd->lock);
+	mutex_unlock(&pcd->lock);
 }
 
 /**
- * pm_runtime_clk_init - Initialize a device's list of runtime PM clocks.
- * @dev: Device to initialize the list of runtime PM clocks for.
+ * pm_clk_init - Initialize a device's list of power management clocks.
+ * @dev: Device to initialize the list of PM clocks for.
  *
- * Allocate a struct pm_runtime_clk_data object, initialize its lock member and
+ * Allocate a struct pm_clk_data object, initialize its lock member and
  * make the @dev's power.subsys_data field point to it.
  */
-int pm_runtime_clk_init(struct device *dev)
+int pm_clk_init(struct device *dev)
 {
-	struct pm_runtime_clk_data *prd;
+	struct pm_clk_data *pcd;
 
-	prd = kzalloc(sizeof(*prd), GFP_KERNEL);
-	if (!prd) {
-		dev_err(dev, "Not enough memory fo runtime PM data.\n");
+	pcd = kzalloc(sizeof(*pcd), GFP_KERNEL);
+	if (!pcd) {
+		dev_err(dev, "Not enough memory for PM clock data.\n");
 		return -ENOMEM;
 	}
 
-	INIT_LIST_HEAD(&prd->clock_list);
-	mutex_init(&prd->lock);
-	dev->power.subsys_data = prd;
+	INIT_LIST_HEAD(&pcd->clock_list);
+	mutex_init(&pcd->lock);
+	dev->power.subsys_data = pcd;
 	return 0;
 }
 
 /**
- * pm_runtime_clk_destroy - Destroy a device's list of runtime PM clocks.
- * @dev: Device to destroy the list of runtime PM clocks for.
+ * pm_clk_destroy - Destroy a device's list of power management clocks.
+ * @dev: Device to destroy the list of PM clocks for.
  *
  * Clear the @dev's power.subsys_data field, remove the list of clock entries
- * from the struct pm_runtime_clk_data object pointed to by it before and free
+ * from the struct pm_clk_data object pointed to by it before and free
  * that object.
  */
-void pm_runtime_clk_destroy(struct device *dev)
+void pm_clk_destroy(struct device *dev)
 {
-	struct pm_runtime_clk_data *prd = __to_prd(dev);
+	struct pm_clk_data *pcd = __to_pcd(dev);
 	struct pm_clock_entry *ce, *c;
 
-	if (!prd)
+	if (!pcd)
 		return;
 
 	dev->power.subsys_data = NULL;
 
-	mutex_lock(&prd->lock);
+	mutex_lock(&pcd->lock);
 
-	list_for_each_entry_safe_reverse(ce, c, &prd->clock_list, node)
-		__pm_runtime_clk_remove(ce);
+	list_for_each_entry_safe_reverse(ce, c, &pcd->clock_list, node)
+		__pm_clk_remove(ce);
 
-	mutex_unlock(&prd->lock);
+	mutex_unlock(&pcd->lock);
 
-	kfree(prd);
+	kfree(pcd);
 }
 
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_PM_RUNTIME
+
 /**
- * pm_runtime_clk_acquire - Acquire a device clock.
+ * pm_clk_acquire - Acquire a device clock.
  * @dev: Device whose clock is to be acquired.
  * @con_id: Connection ID of the clock.
  */
-static void pm_runtime_clk_acquire(struct device *dev,
+static void pm_clk_acquire(struct device *dev,
 				    struct pm_clock_entry *ce)
 {
 	ce->clk = clk_get(dev, ce->con_id);
@@ -209,24 +213,24 @@ static void pm_runtime_clk_acquire(struct device *dev,
 }
 
 /**
- * pm_runtime_clk_suspend - Disable clocks in a device's runtime PM clock list.
+ * pm_clk_suspend - Disable clocks in a device's PM clock list.
  * @dev: Device to disable the clocks for.
  */
-int pm_runtime_clk_suspend(struct device *dev)
+int pm_clk_suspend(struct device *dev)
 {
-	struct pm_runtime_clk_data *prd = __to_prd(dev);
+	struct pm_clk_data *pcd = __to_pcd(dev);
 	struct pm_clock_entry *ce;
 
 	dev_dbg(dev, "%s()\n", __func__);
 
-	if (!prd)
+	if (!pcd)
 		return 0;
 
-	mutex_lock(&prd->lock);
+	mutex_lock(&pcd->lock);
 
-	list_for_each_entry_reverse(ce, &prd->clock_list, node) {
+	list_for_each_entry_reverse(ce, &pcd->clock_list, node) {
 		if (ce->status == PCE_STATUS_NONE)
-			pm_runtime_clk_acquire(dev, ce);
+			pm_clk_acquire(dev, ce);
 
 		if (ce->status < PCE_STATUS_ERROR) {
 			clk_disable(ce->clk);
@@ -234,30 +238,30 @@ int pm_runtime_clk_suspend(struct device *dev)
 		}
 	}
 
-	mutex_unlock(&prd->lock);
+	mutex_unlock(&pcd->lock);
 
 	return 0;
 }
 
 /**
- * pm_runtime_clk_resume - Enable clocks in a device's runtime PM clock list.
+ * pm_clk_resume - Enable clocks in a device's PM clock list.
  * @dev: Device to enable the clocks for.
  */
-int pm_runtime_clk_resume(struct device *dev)
+int pm_clk_resume(struct device *dev)
 {
-	struct pm_runtime_clk_data *prd = __to_prd(dev);
+	struct pm_clk_data *pcd = __to_pcd(dev);
 	struct pm_clock_entry *ce;
 
 	dev_dbg(dev, "%s()\n", __func__);
 
-	if (!prd)
+	if (!pcd)
 		return 0;
 
-	mutex_lock(&prd->lock);
+	mutex_lock(&pcd->lock);
 
-	list_for_each_entry(ce, &prd->clock_list, node) {
+	list_for_each_entry(ce, &pcd->clock_list, node) {
 		if (ce->status == PCE_STATUS_NONE)
-			pm_runtime_clk_acquire(dev, ce);
+			pm_clk_acquire(dev, ce);
 
 		if (ce->status < PCE_STATUS_ERROR) {
 			clk_enable(ce->clk);
@@ -265,28 +269,28 @@ int pm_runtime_clk_resume(struct device *dev)
 		}
 	}
 
-	mutex_unlock(&prd->lock);
+	mutex_unlock(&pcd->lock);
 
 	return 0;
 }
 
 /**
- * pm_runtime_clk_notify - Notify routine for device addition and removal.
+ * pm_clk_notify - Notify routine for device addition and removal.
  * @nb: Notifier block object this function is a member of.
  * @action: Operation being carried out by the caller.
  * @data: Device the routine is being run for.
  *
  * For this function to work, @nb must be a member of an object of type
  * struct pm_clk_notifier_block containing all of the requisite data.
- * Specifically, the pwr_domain member of that object is copied to the device's
- * pwr_domain field and its con_ids member is used to populate the device's list
- * of runtime PM clocks, depending on @action.
+ * Specifically, the pm_domain member of that object is copied to the device's
+ * pm_domain field and its con_ids member is used to populate the device's list
+ * of PM clocks, depending on @action.
  *
- * If the device's pwr_domain field is already populated with a value different
+ * If the device's pm_domain field is already populated with a value different
  * from the one stored in the struct pm_clk_notifier_block object, the function
  * does nothing.
  */
-static int pm_runtime_clk_notify(struct notifier_block *nb,
+static int pm_clk_notify(struct notifier_block *nb,
 				 unsigned long action, void *data)
 {
 	struct pm_clk_notifier_block *clknb;
@@ -300,28 +304,28 @@ static int pm_runtime_clk_notify(struct notifier_block *nb,
 
 	switch (action) {
 	case BUS_NOTIFY_ADD_DEVICE:
-		if (dev->pwr_domain)
+		if (dev->pm_domain)
 			break;
 
-		error = pm_runtime_clk_init(dev);
+		error = pm_clk_init(dev);
 		if (error)
 			break;
 
-		dev->pwr_domain = clknb->pwr_domain;
+		dev->pm_domain = clknb->pm_domain;
 		if (clknb->con_ids[0]) {
 			for (con_id = clknb->con_ids; *con_id; con_id++)
-				pm_runtime_clk_add(dev, *con_id);
+				pm_clk_add(dev, *con_id);
 		} else {
-			pm_runtime_clk_add(dev, NULL);
+			pm_clk_add(dev, NULL);
 		}
 
 		break;
 	case BUS_NOTIFY_DEL_DEVICE:
-		if (dev->pwr_domain != clknb->pwr_domain)
+		if (dev->pm_domain != clknb->pm_domain)
 			break;
 
-		dev->pwr_domain = NULL;
-		pm_runtime_clk_destroy(dev);
+		dev->pm_domain = NULL;
+		pm_clk_destroy(dev);
 		break;
 	}
 
@@ -330,6 +334,60 @@ static int pm_runtime_clk_notify(struct notifier_block *nb,
 
 #else /* !CONFIG_PM_RUNTIME */
 
+#ifdef CONFIG_PM
+
+/**
+ * pm_clk_suspend - Disable clocks in a device's PM clock list.
+ * @dev: Device to disable the clocks for.
+ */
+int pm_clk_suspend(struct device *dev)
+{
+	struct pm_clk_data *pcd = __to_pcd(dev);
+	struct pm_clock_entry *ce;
+
+	dev_dbg(dev, "%s()\n", __func__);
+
+	/* If there is no driver, the clocks are already disabled. */
+	if (!pcd || !dev->driver)
+		return 0;
+
+	mutex_lock(&pcd->lock);
+
+	list_for_each_entry_reverse(ce, &pcd->clock_list, node)
+		clk_disable(ce->clk);
+
+	mutex_unlock(&pcd->lock);
+
+	return 0;
+}
+
+/**
+ * pm_clk_resume - Enable clocks in a device's PM clock list.
+ * @dev: Device to enable the clocks for.
+ */
+int pm_clk_resume(struct device *dev)
+{
+	struct pm_clk_data *pcd = __to_pcd(dev);
+	struct pm_clock_entry *ce;
+
+	dev_dbg(dev, "%s()\n", __func__);
+
+	/* If there is no driver, the clocks should remain disabled. */
+	if (!pcd || !dev->driver)
+		return 0;
+
+	mutex_lock(&pcd->lock);
+
+	list_for_each_entry(ce, &pcd->clock_list, node)
+		clk_enable(ce->clk);
+
+	mutex_unlock(&pcd->lock);
+
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
 /**
  * enable_clock - Enable a device clock.
  * @dev: Device whose clock is to be enabled.
@@ -365,7 +423,7 @@ static void disable_clock(struct device *dev, const char *con_id)
 }
 
 /**
- * pm_runtime_clk_notify - Notify routine for device addition and removal.
+ * pm_clk_notify - Notify routine for device addition and removal.
  * @nb: Notifier block object this function is a member of.
  * @action: Operation being carried out by the caller.
  * @data: Device the routine is being run for.
@@ -375,7 +433,7 @@ static void disable_clock(struct device *dev, const char *con_id)
  * Specifically, the con_ids member of that object is used to enable or disable
  * the device's clocks, depending on @action.
  */
-static int pm_runtime_clk_notify(struct notifier_block *nb,
+static int pm_clk_notify(struct notifier_block *nb,
 				 unsigned long action, void *data)
 {
 	struct pm_clk_notifier_block *clknb;
@@ -411,21 +469,21 @@ static int pm_runtime_clk_notify(struct notifier_block *nb,
 #endif /* !CONFIG_PM_RUNTIME */
 
 /**
- * pm_runtime_clk_add_notifier - Add bus type notifier for runtime PM clocks.
+ * pm_clk_add_notifier - Add bus type notifier for power management clocks.
  * @bus: Bus type to add the notifier to.
  * @clknb: Notifier to be added to the given bus type.
  *
  * The nb member of @clknb is not expected to be initialized and its
- * notifier_call member will be replaced with pm_runtime_clk_notify().  However,
+ * notifier_call member will be replaced with pm_clk_notify().  However,
  * the remaining members of @clknb should be populated prior to calling this
  * routine.
  */
-void pm_runtime_clk_add_notifier(struct bus_type *bus,
+void pm_clk_add_notifier(struct bus_type *bus,
 				 struct pm_clk_notifier_block *clknb)
 {
 	if (!bus || !clknb)
 		return;
 
-	clknb->nb.notifier_call = pm_runtime_clk_notify;
+	clknb->nb.notifier_call = pm_clk_notify;
 	bus_register_notifier(bus, &clknb->nb);
 }
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
new file mode 100644
index 00000000000..be8714aa9dd
--- /dev/null
+++ b/drivers/base/power/domain.c
@@ -0,0 +1,1273 @@
+/*
+ * drivers/base/power/domain.c - Common code related to device power domains.
+ *
+ * Copyright (C) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm_domain.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <linux/suspend.h>
+
+static LIST_HEAD(gpd_list);
+static DEFINE_MUTEX(gpd_list_lock);
+
+#ifdef CONFIG_PM
+
+static struct generic_pm_domain *dev_to_genpd(struct device *dev)
+{
+	if (IS_ERR_OR_NULL(dev->pm_domain))
+		return ERR_PTR(-EINVAL);
+
+	return pd_to_genpd(dev->pm_domain);
+}
+
+static void genpd_sd_counter_dec(struct generic_pm_domain *genpd)
+{
+	if (!WARN_ON(genpd->sd_count == 0))
+			genpd->sd_count--;
+}
+
+static void genpd_acquire_lock(struct generic_pm_domain *genpd)
+{
+	DEFINE_WAIT(wait);
+
+	mutex_lock(&genpd->lock);
+	/*
+	 * Wait for the domain to transition into either the active,
+	 * or the power off state.
+	 */
+	for (;;) {
+		prepare_to_wait(&genpd->status_wait_queue, &wait,
+				TASK_UNINTERRUPTIBLE);
+		if (genpd->status == GPD_STATE_ACTIVE
+		    || genpd->status == GPD_STATE_POWER_OFF)
+			break;
+		mutex_unlock(&genpd->lock);
+
+		schedule();
+
+		mutex_lock(&genpd->lock);
+	}
+	finish_wait(&genpd->status_wait_queue, &wait);
+}
+
+static void genpd_release_lock(struct generic_pm_domain *genpd)
+{
+	mutex_unlock(&genpd->lock);
+}
+
+static void genpd_set_active(struct generic_pm_domain *genpd)
+{
+	if (genpd->resume_count == 0)
+		genpd->status = GPD_STATE_ACTIVE;
+}
+
+/**
+ * pm_genpd_poweron - Restore power to a given PM domain and its parents.
+ * @genpd: PM domain to power up.
+ *
+ * Restore power to @genpd and all of its parents so that it is possible to
+ * resume a device belonging to it.
+ */
+int pm_genpd_poweron(struct generic_pm_domain *genpd)
+{
+	struct generic_pm_domain *parent = genpd->parent;
+	DEFINE_WAIT(wait);
+	int ret = 0;
+
+ start:
+	if (parent) {
+		genpd_acquire_lock(parent);
+		mutex_lock_nested(&genpd->lock, SINGLE_DEPTH_NESTING);
+	} else {
+		mutex_lock(&genpd->lock);
+	}
+
+	if (genpd->status == GPD_STATE_ACTIVE
+	    || (genpd->prepared_count > 0 && genpd->suspend_power_off))
+		goto out;
+
+	if (genpd->status != GPD_STATE_POWER_OFF) {
+		genpd_set_active(genpd);
+		goto out;
+	}
+
+	if (parent && parent->status != GPD_STATE_ACTIVE) {
+		mutex_unlock(&genpd->lock);
+		genpd_release_lock(parent);
+
+		ret = pm_genpd_poweron(parent);
+		if (ret)
+			return ret;
+
+		goto start;
+	}
+
+	if (genpd->power_on) {
+		int ret = genpd->power_on(genpd);
+		if (ret)
+			goto out;
+	}
+
+	genpd_set_active(genpd);
+	if (parent)
+		parent->sd_count++;
+
+ out:
+	mutex_unlock(&genpd->lock);
+	if (parent)
+		genpd_release_lock(parent);
+
+	return ret;
+}
+
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_PM_RUNTIME
+
+/**
+ * __pm_genpd_save_device - Save the pre-suspend state of a device.
+ * @dle: Device list entry of the device to save the state of.
+ * @genpd: PM domain the device belongs to.
+ */
+static int __pm_genpd_save_device(struct dev_list_entry *dle,
+				  struct generic_pm_domain *genpd)
+	__releases(&genpd->lock) __acquires(&genpd->lock)
+{
+	struct device *dev = dle->dev;
+	struct device_driver *drv = dev->driver;
+	int ret = 0;
+
+	if (dle->need_restore)
+		return 0;
+
+	mutex_unlock(&genpd->lock);
+
+	if (drv && drv->pm && drv->pm->runtime_suspend) {
+		if (genpd->start_device)
+			genpd->start_device(dev);
+
+		ret = drv->pm->runtime_suspend(dev);
+
+		if (genpd->stop_device)
+			genpd->stop_device(dev);
+	}
+
+	mutex_lock(&genpd->lock);
+
+	if (!ret)
+		dle->need_restore = true;
+
+	return ret;
+}
+
+/**
+ * __pm_genpd_restore_device - Restore the pre-suspend state of a device.
+ * @dle: Device list entry of the device to restore the state of.
+ * @genpd: PM domain the device belongs to.
+ */
+static void __pm_genpd_restore_device(struct dev_list_entry *dle,
+				      struct generic_pm_domain *genpd)
+	__releases(&genpd->lock) __acquires(&genpd->lock)
+{
+	struct device *dev = dle->dev;
+	struct device_driver *drv = dev->driver;
+
+	if (!dle->need_restore)
+		return;
+
+	mutex_unlock(&genpd->lock);
+
+	if (drv && drv->pm && drv->pm->runtime_resume) {
+		if (genpd->start_device)
+			genpd->start_device(dev);
+
+		drv->pm->runtime_resume(dev);
+
+		if (genpd->stop_device)
+			genpd->stop_device(dev);
+	}
+
+	mutex_lock(&genpd->lock);
+
+	dle->need_restore = false;
+}
+
+/**
+ * genpd_abort_poweroff - Check if a PM domain power off should be aborted.
+ * @genpd: PM domain to check.
+ *
+ * Return true if a PM domain's status changed to GPD_STATE_ACTIVE during
+ * a "power off" operation, which means that a "power on" has occured in the
+ * meantime, or if its resume_count field is different from zero, which means
+ * that one of its devices has been resumed in the meantime.
+ */
+static bool genpd_abort_poweroff(struct generic_pm_domain *genpd)
+{
+	return genpd->status == GPD_STATE_ACTIVE || genpd->resume_count > 0;
+}
+
+/**
+ * genpd_queue_power_off_work - Queue up the execution of pm_genpd_poweroff().
+ * @genpd: PM domait to power off.
+ *
+ * Queue up the execution of pm_genpd_poweroff() unless it's already been done
+ * before.
+ */
+void genpd_queue_power_off_work(struct generic_pm_domain *genpd)
+{
+	if (!work_pending(&genpd->power_off_work))
+		queue_work(pm_wq, &genpd->power_off_work);
+}
+
+/**
+ * pm_genpd_poweroff - Remove power from a given PM domain.
+ * @genpd: PM domain to power down.
+ *
+ * If all of the @genpd's devices have been suspended and all of its subdomains
+ * have been powered down, run the runtime suspend callbacks provided by all of
+ * the @genpd's devices' drivers and remove power from @genpd.
+ */
+static int pm_genpd_poweroff(struct generic_pm_domain *genpd)
+	__releases(&genpd->lock) __acquires(&genpd->lock)
+{
+	struct generic_pm_domain *parent;
+	struct dev_list_entry *dle;
+	unsigned int not_suspended;
+	int ret = 0;
+
+ start:
+	/*
+	 * Do not try to power off the domain in the following situations:
+	 * (1) The domain is already in the "power off" state.
+	 * (2) System suspend is in progress.
+	 * (3) One of the domain's devices is being resumed right now.
+	 */
+	if (genpd->status == GPD_STATE_POWER_OFF || genpd->prepared_count > 0
+	    || genpd->resume_count > 0)
+		return 0;
+
+	if (genpd->sd_count > 0)
+		return -EBUSY;
+
+	not_suspended = 0;
+	list_for_each_entry(dle, &genpd->dev_list, node)
+		if (dle->dev->driver && !pm_runtime_suspended(dle->dev))
+			not_suspended++;
+
+	if (not_suspended > genpd->in_progress)
+		return -EBUSY;
+
+	if (genpd->poweroff_task) {
+		/*
+		 * Another instance of pm_genpd_poweroff() is executing
+		 * callbacks, so tell it to start over and return.
+		 */
+		genpd->status = GPD_STATE_REPEAT;
+		return 0;
+	}
+
+	if (genpd->gov && genpd->gov->power_down_ok) {
+		if (!genpd->gov->power_down_ok(&genpd->domain))
+			return -EAGAIN;
+	}
+
+	genpd->status = GPD_STATE_BUSY;
+	genpd->poweroff_task = current;
+
+	list_for_each_entry_reverse(dle, &genpd->dev_list, node) {
+		ret = __pm_genpd_save_device(dle, genpd);
+		if (ret) {
+			genpd_set_active(genpd);
+			goto out;
+		}
+
+		if (genpd_abort_poweroff(genpd))
+			goto out;
+
+		if (genpd->status == GPD_STATE_REPEAT) {
+			genpd->poweroff_task = NULL;
+			goto start;
+		}
+	}
+
+	parent = genpd->parent;
+	if (parent) {
+		mutex_unlock(&genpd->lock);
+
+		genpd_acquire_lock(parent);
+		mutex_lock_nested(&genpd->lock, SINGLE_DEPTH_NESTING);
+
+		if (genpd_abort_poweroff(genpd)) {
+			genpd_release_lock(parent);
+			goto out;
+		}
+	}
+
+	if (genpd->power_off) {
+		ret = genpd->power_off(genpd);
+		if (ret == -EBUSY) {
+			genpd_set_active(genpd);
+			if (parent)
+				genpd_release_lock(parent);
+
+			goto out;
+		}
+	}
+
+	genpd->status = GPD_STATE_POWER_OFF;
+
+	if (parent) {
+		genpd_sd_counter_dec(parent);
+		if (parent->sd_count == 0)
+			genpd_queue_power_off_work(parent);
+
+		genpd_release_lock(parent);
+	}
+
+ out:
+	genpd->poweroff_task = NULL;
+	wake_up_all(&genpd->status_wait_queue);
+	return ret;
+}
+
+/**
+ * genpd_power_off_work_fn - Power off PM domain whose subdomain count is 0.
+ * @work: Work structure used for scheduling the execution of this function.
+ */
+static void genpd_power_off_work_fn(struct work_struct *work)
+{
+	struct generic_pm_domain *genpd;
+
+	genpd = container_of(work, struct generic_pm_domain, power_off_work);
+
+	genpd_acquire_lock(genpd);
+	pm_genpd_poweroff(genpd);
+	genpd_release_lock(genpd);
+}
+
+/**
+ * pm_genpd_runtime_suspend - Suspend a device belonging to I/O PM domain.
+ * @dev: Device to suspend.
+ *
+ * Carry out a runtime suspend of a device under the assumption that its
+ * pm_domain field points to the domain member of an object of type
+ * struct generic_pm_domain representing a PM domain consisting of I/O devices.
+ */
+static int pm_genpd_runtime_suspend(struct device *dev)
+{
+	struct generic_pm_domain *genpd;
+
+	dev_dbg(dev, "%s()\n", __func__);
+
+	genpd = dev_to_genpd(dev);
+	if (IS_ERR(genpd))
+		return -EINVAL;
+
+	if (genpd->stop_device) {
+		int ret = genpd->stop_device(dev);
+		if (ret)
+			return ret;
+	}
+
+	mutex_lock(&genpd->lock);
+	genpd->in_progress++;
+	pm_genpd_poweroff(genpd);
+	genpd->in_progress--;
+	mutex_unlock(&genpd->lock);
+
+	return 0;
+}
+
+/**
+ * __pm_genpd_runtime_resume - Resume a device belonging to I/O PM domain.
+ * @dev: Device to resume.
+ * @genpd: PM domain the device belongs to.
+ */
+static void __pm_genpd_runtime_resume(struct device *dev,
+				      struct generic_pm_domain *genpd)
+{
+	struct dev_list_entry *dle;
+
+	list_for_each_entry(dle, &genpd->dev_list, node) {
+		if (dle->dev == dev) {
+			__pm_genpd_restore_device(dle, genpd);
+			break;
+		}
+	}
+}
+
+/**
+ * pm_genpd_runtime_resume - Resume a device belonging to I/O PM domain.
+ * @dev: Device to resume.
+ *
+ * Carry out a runtime resume of a device under the assumption that its
+ * pm_domain field points to the domain member of an object of type
+ * struct generic_pm_domain representing a PM domain consisting of I/O devices.
+ */
+static int pm_genpd_runtime_resume(struct device *dev)
+{
+	struct generic_pm_domain *genpd;
+	DEFINE_WAIT(wait);
+	int ret;
+
+	dev_dbg(dev, "%s()\n", __func__);
+
+	genpd = dev_to_genpd(dev);
+	if (IS_ERR(genpd))
+		return -EINVAL;
+
+	ret = pm_genpd_poweron(genpd);
+	if (ret)
+		return ret;
+
+	mutex_lock(&genpd->lock);
+	genpd->status = GPD_STATE_BUSY;
+	genpd->resume_count++;
+	for (;;) {
+		prepare_to_wait(&genpd->status_wait_queue, &wait,
+				TASK_UNINTERRUPTIBLE);
+		/*
+		 * If current is the powering off task, we have been called
+		 * reentrantly from one of the device callbacks, so we should
+		 * not wait.
+		 */
+		if (!genpd->poweroff_task || genpd->poweroff_task == current)
+			break;
+		mutex_unlock(&genpd->lock);
+
+		schedule();
+
+		mutex_lock(&genpd->lock);
+	}
+	finish_wait(&genpd->status_wait_queue, &wait);
+	__pm_genpd_runtime_resume(dev, genpd);
+	genpd->resume_count--;
+	genpd_set_active(genpd);
+	wake_up_all(&genpd->status_wait_queue);
+	mutex_unlock(&genpd->lock);
+
+	if (genpd->start_device)
+		genpd->start_device(dev);
+
+	return 0;
+}
+
+#else
+
+static inline void genpd_power_off_work_fn(struct work_struct *work) {}
+static inline void __pm_genpd_runtime_resume(struct device *dev,
+					     struct generic_pm_domain *genpd) {}
+
+#define pm_genpd_runtime_suspend	NULL
+#define pm_genpd_runtime_resume		NULL
+
+#endif /* CONFIG_PM_RUNTIME */
+
+#ifdef CONFIG_PM_SLEEP
+
+/**
+ * pm_genpd_sync_poweroff - Synchronously power off a PM domain and its parents.
+ * @genpd: PM domain to power off, if possible.
+ *
+ * Check if the given PM domain can be powered off (during system suspend or
+ * hibernation) and do that if so.  Also, in that case propagate to its parent.
+ *
+ * This function is only called in "noirq" stages of system power transitions,
+ * so it need not acquire locks (all of the "noirq" callbacks are executed
+ * sequentially, so it is guaranteed that it will never run twice in parallel).
+ */
+static void pm_genpd_sync_poweroff(struct generic_pm_domain *genpd)
+{
+	struct generic_pm_domain *parent = genpd->parent;
+
+	if (genpd->status == GPD_STATE_POWER_OFF)
+		return;
+
+	if (genpd->suspended_count != genpd->device_count || genpd->sd_count > 0)
+		return;
+
+	if (genpd->power_off)
+		genpd->power_off(genpd);
+
+	genpd->status = GPD_STATE_POWER_OFF;
+	if (parent) {
+		genpd_sd_counter_dec(parent);
+		pm_genpd_sync_poweroff(parent);
+	}
+}
+
+/**
+ * resume_needed - Check whether to resume a device before system suspend.
+ * @dev: Device to check.
+ * @genpd: PM domain the device belongs to.
+ *
+ * There are two cases in which a device that can wake up the system from sleep
+ * states should be resumed by pm_genpd_prepare(): (1) if the device is enabled
+ * to wake up the system and it has to remain active for this purpose while the
+ * system is in the sleep state and (2) if the device is not enabled to wake up
+ * the system from sleep states and it generally doesn't generate wakeup signals
+ * by itself (those signals are generated on its behalf by other parts of the
+ * system).  In the latter case it may be necessary to reconfigure the device's
+ * wakeup settings during system suspend, because it may have been set up to
+ * signal remote wakeup from the system's working state as needed by runtime PM.
+ * Return 'true' in either of the above cases.
+ */
+static bool resume_needed(struct device *dev, struct generic_pm_domain *genpd)
+{
+	bool active_wakeup;
+
+	if (!device_can_wakeup(dev))
+		return false;
+
+	active_wakeup = genpd-