diff options
author | Jeff Garzik <jgarzik@pobox.com> | 2005-10-30 01:58:18 -0500 |
---|---|---|
committer | Jeff Garzik <jgarzik@pobox.com> | 2005-10-30 01:58:18 -0500 |
commit | f0612bbc41f65f5a684f69d714a1a17a6f0f40c5 (patch) | |
tree | 8c070070bb355843cfa4635643e9da7c2c4cd44a /drivers | |
parent | b0c4e148bd591629749d02a8fbc8d81c26d548cf (diff) | |
parent | 81cfb8864c73230eb1c37753aba517db15cf4d8f (diff) |
Merge branch 'upstream'
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/acpi/acpi_memhotplug.c | 5 | ||||
-rw-r--r-- | drivers/base/Makefile | 1 | ||||
-rw-r--r-- | drivers/base/init.c | 2 | ||||
-rw-r--r-- | drivers/base/memory.c | 452 | ||||
-rw-r--r-- | drivers/md/dm-crypt.c | 12 | ||||
-rw-r--r-- | drivers/net/wireless/airo.c | 7 | ||||
-rw-r--r-- | drivers/scsi/ahci.c | 9 | ||||
-rw-r--r-- | drivers/scsi/arm/scsi.h | 6 | ||||
-rw-r--r-- | drivers/scsi/libata-core.c | 46 | ||||
-rw-r--r-- | drivers/scsi/sata_mv.c | 18 | ||||
-rw-r--r-- | drivers/scsi/sata_sil24.c | 8 | ||||
-rw-r--r-- | drivers/scsi/sg.c | 17 | ||||
-rw-r--r-- | drivers/scsi/st.c | 10 | ||||
-rw-r--r-- | drivers/usb/misc/usbtest.c | 7 |
14 files changed, 497 insertions, 103 deletions
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c index 01a1bd23926..2143609d293 100644 --- a/drivers/acpi/acpi_memhotplug.c +++ b/drivers/acpi/acpi_memhotplug.c @@ -200,8 +200,7 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device) * Note: Assume that this function returns zero on success */ result = add_memory(mem_device->start_addr, - (mem_device->end_addr - mem_device->start_addr) + 1, - mem_device->read_write_attribute); + (mem_device->end_addr - mem_device->start_addr) + 1); if (result) { ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "\nadd_memory failed\n")); mem_device->state = MEMORY_INVALID_STATE; @@ -259,7 +258,7 @@ static int acpi_memory_disable_device(struct acpi_memory_device *mem_device) * Ask the VM to offline this memory range. * Note: Assume that this function returns zero on success */ - result = remove_memory(start, len, attr); + result = remove_memory(start, len); if (result) { ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Hot-Remove failed.\n")); return_VALUE(result); diff --git a/drivers/base/Makefile b/drivers/base/Makefile index 66d9c4643fc..f12898d5307 100644 --- a/drivers/base/Makefile +++ b/drivers/base/Makefile @@ -7,6 +7,7 @@ obj-y := core.o sys.o bus.o dd.o \ obj-y += power/ obj-$(CONFIG_FW_LOADER) += firmware_class.o obj-$(CONFIG_NUMA) += node.o +obj-$(CONFIG_MEMORY_HOTPLUG) += memory.o ifeq ($(CONFIG_DEBUG_DRIVER),y) EXTRA_CFLAGS += -DDEBUG diff --git a/drivers/base/init.c b/drivers/base/init.c index 84e604e25c4..c648914b9cd 100644 --- a/drivers/base/init.c +++ b/drivers/base/init.c @@ -9,6 +9,7 @@ #include <linux/device.h> #include <linux/init.h> +#include <linux/memory.h> #include "base.h" @@ -33,5 +34,6 @@ void __init driver_init(void) platform_bus_init(); system_bus_init(); cpu_dev_init(); + memory_dev_init(); attribute_container_init(); } diff --git a/drivers/base/memory.c b/drivers/base/memory.c new file mode 100644 index 00000000000..b7ddd651d66 --- /dev/null +++ b/drivers/base/memory.c @@ -0,0 +1,452 @@ +/* + * drivers/base/memory.c - basic Memory class support + * + * Written by Matt Tolentino <matthew.e.tolentino@intel.com> + * Dave Hansen <haveblue@us.ibm.com> + * + * This file provides the necessary infrastructure to represent + * a SPARSEMEM-memory-model system's physical memory in /sysfs. + * All arch-independent code that assumes MEMORY_HOTPLUG requires + * SPARSEMEM should be contained here, or in mm/memory_hotplug.c. + */ + +#include <linux/sysdev.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/sched.h> /* capable() */ +#include <linux/topology.h> +#include <linux/device.h> +#include <linux/memory.h> +#include <linux/kobject.h> +#include <linux/memory_hotplug.h> +#include <linux/mm.h> +#include <asm/atomic.h> +#include <asm/uaccess.h> + +#define MEMORY_CLASS_NAME "memory" + +static struct sysdev_class memory_sysdev_class = { + set_kset_name(MEMORY_CLASS_NAME), +}; +EXPORT_SYMBOL(memory_sysdev_class); + +static char *memory_hotplug_name(struct kset *kset, struct kobject *kobj) +{ + return MEMORY_CLASS_NAME; +} + +static int memory_hotplug(struct kset *kset, struct kobject *kobj, char **envp, + int num_envp, char *buffer, int buffer_size) +{ + int retval = 0; + + return retval; +} + +static struct kset_hotplug_ops memory_hotplug_ops = { + .name = memory_hotplug_name, + .hotplug = memory_hotplug, +}; + +static struct notifier_block *memory_chain; + +static int register_memory_notifier(struct notifier_block *nb) +{ + return notifier_chain_register(&memory_chain, nb); +} + +static void unregister_memory_notifier(struct notifier_block *nb) +{ + notifier_chain_unregister(&memory_chain, nb); +} + +/* + * register_memory - Setup a sysfs device for a memory block + */ +static int +register_memory(struct memory_block *memory, struct mem_section *section, + struct node *root) +{ + int error; + + memory->sysdev.cls = &memory_sysdev_class; + memory->sysdev.id = __section_nr(section); + + error = sysdev_register(&memory->sysdev); + + if (root && !error) + error = sysfs_create_link(&root->sysdev.kobj, + &memory->sysdev.kobj, + kobject_name(&memory->sysdev.kobj)); + + return error; +} + +static void +unregister_memory(struct memory_block *memory, struct mem_section *section, + struct node *root) +{ + BUG_ON(memory->sysdev.cls != &memory_sysdev_class); + BUG_ON(memory->sysdev.id != __section_nr(section)); + + sysdev_unregister(&memory->sysdev); + if (root) + sysfs_remove_link(&root->sysdev.kobj, + kobject_name(&memory->sysdev.kobj)); +} + +/* + * use this as the physical section index that this memsection + * uses. + */ + +static ssize_t show_mem_phys_index(struct sys_device *dev, char *buf) +{ + struct memory_block *mem = + container_of(dev, struct memory_block, sysdev); + return sprintf(buf, "%08lx\n", mem->phys_index); +} + +/* + * online, offline, going offline, etc. + */ +static ssize_t show_mem_state(struct sys_device *dev, char *buf) +{ + struct memory_block *mem = + container_of(dev, struct memory_block, sysdev); + ssize_t len = 0; + + /* + * We can probably put these states in a nice little array + * so that they're not open-coded + */ + switch (mem->state) { + case MEM_ONLINE: + len = sprintf(buf, "online\n"); + break; + case MEM_OFFLINE: + len = sprintf(buf, "offline\n"); + break; + case MEM_GOING_OFFLINE: + len = sprintf(buf, "going-offline\n"); + break; + default: + len = sprintf(buf, "ERROR-UNKNOWN-%ld\n", + mem->state); + WARN_ON(1); + break; + } + + return len; +} + +static inline int memory_notify(unsigned long val, void *v) +{ + return notifier_call_chain(&memory_chain, val, v); +} + +/* + * MEMORY_HOTPLUG depends on SPARSEMEM in mm/Kconfig, so it is + * OK to have direct references to sparsemem variables in here. + */ +static int +memory_block_action(struct memory_block *mem, unsigned long action) +{ + int i; + unsigned long psection; + unsigned long start_pfn, start_paddr; + struct page *first_page; + int ret; + int old_state = mem->state; + + psection = mem->phys_index; + first_page = pfn_to_page(psection << PFN_SECTION_SHIFT); + + /* + * The probe routines leave the pages reserved, just + * as the bootmem code does. Make sure they're still + * that way. + */ + if (action == MEM_ONLINE) { + for (i = 0; i < PAGES_PER_SECTION; i++) { + if (PageReserved(first_page+i)) + continue; + + printk(KERN_WARNING "section number %ld page number %d " + "not reserved, was it already online? \n", + psection, i); + return -EBUSY; + } + } + + switch (action) { + case MEM_ONLINE: + start_pfn = page_to_pfn(first_page); + ret = online_pages(start_pfn, PAGES_PER_SECTION); + break; + case MEM_OFFLINE: + mem->state = MEM_GOING_OFFLINE; + memory_notify(MEM_GOING_OFFLINE, NULL); + start_paddr = page_to_pfn(first_page) << PAGE_SHIFT; + ret = remove_memory(start_paddr, + PAGES_PER_SECTION << PAGE_SHIFT); + if (ret) { + mem->state = old_state; + break; + } + memory_notify(MEM_MAPPING_INVALID, NULL); + break; + default: + printk(KERN_WARNING "%s(%p, %ld) unknown action: %ld\n", + __FUNCTION__, mem, action, action); + WARN_ON(1); + ret = -EINVAL; + } + /* + * For now, only notify on successful memory operations + */ + if (!ret) + memory_notify(action, NULL); + + return ret; +} + +static int memory_block_change_state(struct memory_block *mem, + unsigned long to_state, unsigned long from_state_req) +{ + int ret = 0; + down(&mem->state_sem); + + if (mem->state != from_state_req) { + ret = -EINVAL; + goto out; + } + + ret = memory_block_action(mem, to_state); + if (!ret) + mem->state = to_state; + +out: + up(&mem->state_sem); + return ret; +} + +static ssize_t +store_mem_state(struct sys_device *dev, const char *buf, size_t count) +{ + struct memory_block *mem; + unsigned int phys_section_nr; + int ret = -EINVAL; + + mem = container_of(dev, struct memory_block, sysdev); + phys_section_nr = mem->phys_index; + + if (!valid_section_nr(phys_section_nr)) + goto out; + + if (!strncmp(buf, "online", min((int)count, 6))) + ret = memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE); + else if(!strncmp(buf, "offline", min((int)count, 7))) + ret = memory_block_change_state(mem, MEM_OFFLINE, MEM_ONLINE); +out: + if (ret) + return ret; + return count; +} + +/* + * phys_device is a bad name for this. What I really want + * is a way to differentiate between memory ranges that + * are part of physical devices that constitute + * a complete removable unit or fru. + * i.e. do these ranges belong to the same physical device, + * s.t. if I offline all of these sections I can then + * remove the physical device? + */ +static ssize_t show_phys_device(struct sys_device *dev, char *buf) +{ + struct memory_block *mem = + container_of(dev, struct memory_block, sysdev); + return sprintf(buf, "%d\n", mem->phys_device); +} + +static SYSDEV_ATTR(phys_index, 0444, show_mem_phys_index, NULL); +static SYSDEV_ATTR(state, 0644, show_mem_state, store_mem_state); +static SYSDEV_ATTR(phys_device, 0444, show_phys_device, NULL); + +#define mem_create_simple_file(mem, attr_name) \ + sysdev_create_file(&mem->sysdev, &attr_##attr_name) +#define mem_remove_simple_file(mem, attr_name) \ + sysdev_remove_file(&mem->sysdev, &attr_##attr_name) + +/* + * Block size attribute stuff + */ +static ssize_t +print_block_size(struct class *class, char *buf) +{ + return sprintf(buf, "%lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE); +} + +static CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL); + +static int block_size_init(void) +{ + sysfs_create_file(&memory_sysdev_class.kset.kobj, + &class_attr_block_size_bytes.attr); + return 0; +} + +/* + * Some architectures will have custom drivers to do this, and + * will not need to do it from userspace. The fake hot-add code + * as well as ppc64 will do all of their discovery in userspace + * and will require this interface. + */ +#ifdef CONFIG_ARCH_MEMORY_PROBE +static ssize_t +memory_probe_store(struct class *class, const char __user *buf, size_t count) +{ + u64 phys_addr; + int ret; + + phys_addr = simple_strtoull(buf, NULL, 0); + + ret = add_memory(phys_addr, PAGES_PER_SECTION << PAGE_SHIFT); + + if (ret) + count = ret; + + return count; +} +static CLASS_ATTR(probe, 0700, NULL, memory_probe_store); + +static int memory_probe_init(void) +{ + sysfs_create_file(&memory_sysdev_class.kset.kobj, + &class_attr_probe.attr); + return 0; +} +#else +#define memory_probe_init(...) do {} while (0) +#endif + +/* + * Note that phys_device is optional. It is here to allow for + * differentiation between which *physical* devices each + * section belongs to... + */ + +static int add_memory_block(unsigned long node_id, struct mem_section *section, + unsigned long state, int phys_device) +{ + struct memory_block *mem = kzalloc(sizeof(*mem), GFP_KERNEL); + int ret = 0; + + if (!mem) + return -ENOMEM; + + mem->phys_index = __section_nr(section); + mem->state = state; + init_MUTEX(&mem->state_sem); + mem->phys_device = phys_device; + + ret = register_memory(mem, section, NULL); + if (!ret) + ret = mem_create_simple_file(mem, phys_index); + if (!ret) + ret = mem_create_simple_file(mem, state); + if (!ret) + ret = mem_create_simple_file(mem, phys_device); + + return ret; +} + +/* + * For now, we have a linear search to go find the appropriate + * memory_block corresponding to a particular phys_index. If + * this gets to be a real problem, we can always use a radix + * tree or something here. + * + * This could be made generic for all sysdev classes. + */ +static struct memory_block *find_memory_block(struct mem_section *section) +{ + struct kobject *kobj; + struct sys_device *sysdev; + struct memory_block *mem; + char name[sizeof(MEMORY_CLASS_NAME) + 9 + 1]; + + /* + * This only works because we know that section == sysdev->id + * slightly redundant with sysdev_register() + */ + sprintf(&name[0], "%s%d", MEMORY_CLASS_NAME, __section_nr(section)); + + kobj = kset_find_obj(&memory_sysdev_class.kset, name); + if (!kobj) + return NULL; + + sysdev = container_of(kobj, struct sys_device, kobj); + mem = container_of(sysdev, struct memory_block, sysdev); + + return mem; +} + +int remove_memory_block(unsigned long node_id, struct mem_section *section, + int phys_device) +{ + struct memory_block *mem; + + mem = find_memory_block(section); + mem_remove_simple_file(mem, phys_index); + mem_remove_simple_file(mem, state); + mem_remove_simple_file(mem, phys_device); + unregister_memory(mem, section, NULL); + + return 0; +} + +/* + * need an interface for the VM to add new memory regions, + * but without onlining it. + */ +int register_new_memory(struct mem_section *section) +{ + return add_memory_block(0, section, MEM_OFFLINE, 0); +} + +int unregister_memory_section(struct mem_section *section) +{ + if (!valid_section(section)) + return -EINVAL; + + return remove_memory_block(0, section, 0); +} + +/* + * Initialize the sysfs support for memory devices... + */ +int __init memory_dev_init(void) +{ + unsigned int i; + int ret; + + memory_sysdev_class.kset.hotplug_ops = &memory_hotplug_ops; + ret = sysdev_class_register(&memory_sysdev_class); + + /* + * Create entries for memory sections that were found + * during boot and have been initialized + */ + for (i = 0; i < NR_MEM_SECTIONS; i++) { + if (!valid_section_nr(i)) + continue; + add_memory_block(0, __nr_to_section(i), MEM_ONLINE, 0); + } + + memory_probe_init(); + block_size_init(); + + return ret; +} diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 28c1a628621..cf663105668 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -15,7 +15,7 @@ #include <linux/crypto.h> #include <linux/workqueue.h> #include <asm/atomic.h> -#include <asm/scatterlist.h> +#include <linux/scatterlist.h> #include <asm/page.h> #include "dm.h" @@ -164,9 +164,7 @@ static int crypt_iv_essiv_ctr(struct crypt_config *cc, struct dm_target *ti, return -ENOMEM; } - sg.page = virt_to_page(cc->key); - sg.offset = offset_in_page(cc->key); - sg.length = cc->key_size; + sg_set_buf(&sg, cc->key, cc->key_size); crypto_digest_digest(hash_tfm, &sg, 1, salt); crypto_free_tfm(hash_tfm); @@ -207,14 +205,12 @@ static void crypt_iv_essiv_dtr(struct crypt_config *cc) static int crypt_iv_essiv_gen(struct crypt_config *cc, u8 *iv, sector_t sector) { - struct scatterlist sg = { NULL, }; + struct scatterlist sg; memset(iv, 0, cc->iv_size); *(u64 *)iv = cpu_to_le64(sector); - sg.page = virt_to_page(iv); - sg.offset = offset_in_page(iv); - sg.length = cc->iv_size; + sg_set_buf(&sg, iv, cc->iv_size); crypto_cipher_encrypt((struct crypto_tfm *)cc->iv_gen_private, &sg, &sg, cc->iv_size); diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 4c11699bad9..750c0167539 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -35,6 +35,7 @@ #include <linux/interrupt.h> #include <linux/in.h> #include <linux/bitops.h> +#include <linux/scatterlist.h> #include <asm/io.h> #include <asm/system.h> @@ -1590,11 +1591,9 @@ static void emmh32_setseed(emmh32_context *context, u8 *pkey, int keylen, struct aes_counter[12] = (u8)(counter >> 24); counter++; memcpy (plain, aes_counter, 16); - sg[0].page = virt_to_page(plain); - sg[0].offset = ((long) plain & ~PAGE_MASK); - sg[0].length = 16; + sg_set_buf(sg, plain, 16); crypto_cipher_encrypt(tfm, sg, sg, 16); - cipher = kmap(sg[0].page) + sg[0].offset; + cipher = kmap(sg->page) + sg->offset; for (j=0; (j<16) && (i< (sizeof(context->coeff)/sizeof(context->coeff[0]))); ) { context->coeff[i++] = ntohl(*(u32 *)&cipher[j]); j += 4; diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index cbab5868ffd..3df74a08fe2 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -192,7 +192,6 @@ static void ahci_port_stop(struct ata_port *ap); static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf); static void ahci_qc_prep(struct ata_queued_cmd *qc); static u8 ahci_check_status(struct ata_port *ap); -static u8 ahci_check_err(struct ata_port *ap); static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc); static void ahci_remove_one (struct pci_dev *pdev); @@ -221,7 +220,6 @@ static const struct ata_port_operations ahci_ops = { .check_status = ahci_check_status, .check_altstatus = ahci_check_status, - .check_err = ahci_check_err, .dev_select = ata_noop_dev_select, .tf_read = ahci_tf_read, @@ -466,13 +464,6 @@ static u8 ahci_check_status(struct ata_port *ap) return readl(mmio + PORT_TFDATA) & 0xFF; } -static u8 ahci_check_err(struct ata_port *ap) -{ - void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr; - - return (readl(mmio + PORT_TFDATA) >> 8) & 0xFF; -} - static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf) { struct ahci_port_priv *pp = ap->private_data; diff --git a/drivers/scsi/arm/scsi.h b/drivers/scsi/arm/scsi.h index 48e1c4d9738..19937640e2e 100644 --- a/drivers/scsi/arm/scsi.h +++ b/drivers/scsi/arm/scsi.h @@ -10,6 +10,8 @@ * Commonly used scsi driver functions. */ +#include <linux/scatterlist.h> + #define BELT_AND_BRACES /* @@ -22,9 +24,7 @@ static inline int copy_SCp_to_sg(struct scatterlist *sg, Scsi_Pointer *SCp, int BUG_ON(bufs + 1 > max); - sg->page = virt_to_page(SCp->ptr); - sg->offset = offset_in_page(SCp->ptr); - sg->length = SCp->this_residual; + sg_set_buf(sg, SCp->ptr, SCp->this_residual); if (bufs) memcpy(sg + 1, SCp->buffer + 1, diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 3171e386f70..0d58f4d3e5c 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -49,6 +49,7 @@ #include <linux/suspend.h> #include <linux/workqueue.h> #include <linux/jiffies.h> +#include <linux/scatterlist.h> #include <scsi/scsi.h> #include "scsi.h" #include "scsi_priv.h" @@ -371,7 +372,7 @@ static void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf) struct ata_ioports *ioaddr = &ap->ioaddr; tf->command = ata_check_status(ap); - tf->feature = ata_chk_err(ap); + tf->feature = inb(ioaddr->error_addr); tf->nsect = inb(ioaddr->nsect_addr); tf->lbal = inb(ioaddr->lbal_addr); tf->lbam = inb(ioaddr->lbam_addr); @@ -405,7 +406,7 @@ static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf) struct ata_ioports *ioaddr = &ap->ioaddr; tf->command = ata_check_status(ap); - tf->feature = ata_chk_err(ap); + tf->feature = readb((void __iomem *)ioaddr->error_addr); tf->nsect = readb((void __iomem *)ioaddr->nsect_addr); tf->lbal = readb((void __iomem *)ioaddr->lbal_addr); tf->lbam = readb((void __iomem *)ioaddr->lbam_addr); @@ -526,30 +527,6 @@ u8 ata_altstatus(struct ata_port *ap) /** - * ata_chk_err - Read device error reg - * @ap: port where the device is - * - * Reads ATA taskfile error register for - * currently-selected device and return its value. - * - * Note: may NOT be used as the check_err() entry in - * ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -u8 ata_chk_err(struct ata_port *ap) -{ - if (ap->ops->check_err) - return ap->ops->check_err(ap); - - if (ap->flags & ATA_FLAG_MMIO) { - return readb((void __iomem *) ap->ioaddr.error_addr); - } - return inb(ap->ioaddr.error_addr); -} - -/** * ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure * @tf: Taskfile to convert * @fis: Buffer into which data will output @@ -901,8 +878,8 @@ static u8 ata_dev_try_classify(struct ata_port *ap, unsigned int device) memset(&tf, 0, sizeof(tf)); - err = ata_chk_err(ap); ap->ops->tf_read(ap, &tf); + err = tf.feature; dev->class = ATA_DEV_NONE; @@ -1139,7 +1116,6 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device) unsigned int major_version; u16 tmp; unsigned long xfer_modes; - u8 status; unsigned int using_edd; DECLARE_COMPLETION(wait); struct ata_queued_cmd *qc; @@ -1193,8 +1169,11 @@ retry: else wait_for_completion(&wait); - status = ata_chk_status(ap); - if (status & ATA_ERR) { + spin_lock_irqsave(&ap->host_set->lock, flags); + ap->ops->tf_read(ap, &qc->tf); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + if (qc->tf.command & ATA_ERR) { /* * arg! EDD works for all test cases, but seems to return * the ATA signature for some ATAPI devices. Until the @@ -1207,7 +1186,7 @@ retry: * to have this problem. */ if ((using_edd) && (qc->tf.command == ATA_CMD_ID_ATA)) { - u8 err = ata_chk_err(ap); + u8 err = qc->tf.feature; if (err & ATA_ABORTED) { dev->class = ATA_DEV_ATAPI; qc->cursg = 0; @@ -2609,9 +2588,7 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) qc->buf_virt = buf; sg = qc->__sg; - sg->page = virt_to_page(buf); - sg->offset = (unsigned long) buf & ~PAGE_MASK; - sg->length = buflen; + sg_init_one(sg, buf, buflen); } /** @@ -4962,7 +4939,6 @@ EXPORT_SYMBOL_GPL(ata_tf_to_fis); EXPORT_SYMBOL_GPL(ata_tf_from_fis); EXPORT_SYMBOL_GPL(ata_check_status); EXPORT_SYMBOL_GPL(ata_altstatus); -EXPORT_SYMBOL_GPL(ata_chk_err); EXPORT_SYMBOL_GPL(ata_exec_command); EXPORT_SYMBOL_GPL(ata_port_start); EXPORT_SYMBOL_GPL(ata_port_stop); diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 1d6d0c9e76f..ad4808ef71d 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -258,7 +258,6 @@ struct mv_host_priv { static void mv_irq_clear(struct ata_port *ap); static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in); static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val); -static u8 mv_check_err(struct ata_port *ap); static void mv_phy_reset(struct ata_port *ap); static void mv_host_stop(struct ata_host_set *host_set); static int mv_port_start(struct ata_port *ap); @@ -296,7 +295,6 @@ static const struct ata_port_operations mv_ops = { .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, - .check_err = mv_check_err, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, @@ -1186,22 +1184,6 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, } /** - * mv_check_err - Return the error shadow register to caller. - * @ap: ATA channel to manipulate - * - * Marvell requires DMA to be stopped before accessing shadow - * registers. So we do that, then return the needed register. - * - * LOCKING: - * Inherited from caller. FIXME: protect mv_stop_dma with lock? - */ -static u8 mv_check_err(struct ata_port *ap) -{ - mv_stop_dma(ap); /* can't read shadow regs if DMA on */ - return readb((void __iomem *) ap->ioaddr.error_addr); -} - -/** * mv_phy_reset - Perform eDMA reset followed by COMRESET * @ap: ATA channel to manipulate * diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 423096f7fe9..7e6e5c049b7 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -225,7 +225,6 @@ struct sil24_host_priv { }; static u8 sil24_check_status(struct ata_port *ap); -static u8 sil24_check_err(struct ata_port *ap); static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg); static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val); static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf); @@ -280,7 +279,6 @@ static const struct ata_port_operations sil24_ops = { .check_status = sil24_check_status, .check_altstatus = sil24_check_status, - .check_err = sil24_check_err, .dev_select = ata_noop_dev_select, .tf_read = sil24_tf_read, @@ -363,12 +361,6 @@ static u8 sil24_check_status(struct ata_port *ap) return pp->tf.command; } -static u8 sil24_check_err(struct ata_port *ap) -{ - struct sil24_port_priv *pp = ap->private_data; - return pp->tf.feature; -} - static int sil24_scr_map[] = { [SCR_CONTROL] = 0, [SCR_STATUS] = 1, diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 861e51375d7..d86d5c26061 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -49,6 +49,7 @@ static int sg_version_num = 30533; /* 2 digits for each component */ #include <linux/seq_file.h> #include <linux/blkdev.h> #include <linux/delay.h> +#include <linux/scatterlist.h> #include "scsi.h" #include <scsi/scsi_dbg.h> @@ -1886,13 +1887,17 @@ st_unmap_user_pages(struct scatterlist *sgl, const unsigned int nr_pages, int i; for (i=0; i < nr_pages; i++) { - if (dirtied && !PageReserved(sgl[i].page)) - SetPageDirty(sgl[i].page); - /* unlock_page(sgl[i].page); */ + struct page *page = sgl[i].page; + + /* XXX: just for debug. Remove when PageReserved is removed */ + BUG_ON(PageReserved(page)); + if (dirtied) + SetPageDirty(page); + /* unlock_page(page); */ /* FIXME: cache flush missing for rw==READ * FIXME: call the correct reference counting function */ - page_cache_release(sgl[i].page); + page_cache_release(page); } return 0; @@ -1992,9 +1997,7 @@ sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size) if (!p) break; } - sclp->page = virt_to_page(p); - sclp->offset = offset_in_page(p); - sclp->length = ret_sz; + sg_set_buf(sclp, p, ret_sz); SCSI_LOG_TIMEOUT(5, printk("sg_build_build: k=%d, a=0x%p, len=%d\n", k, sg_scatg2virt(sclp), ret_sz)); diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 5eb54d8019b..da9766283bd 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -4526,12 +4526,16 @@ static int sgl_unmap_user_pages(struct scatterlist *sgl, const unsigned int nr_p int i; for (i=0; i < nr_pages; i++) { - if (dirtied && !PageReserved(sgl[i].page)) - SetPageDirty(sgl[i].page); + struct page *page = sgl[i].page; + + /* XXX: just for debug. Remove when PageReserved is removed */ + BUG_ON(PageReserved(page)); + if (dirtied) + SetPageDirty(page); /* FIXME: cache flush missing for rw==READ * FIXME: call the correct reference counting function */ - page_cache_release(sgl[i].page); + page_cache_release(page); } return 0; diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 90a96257d6c..2997f558159 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -9,7 +9,7 @@ #include <linux/mm.h> #include <linux/module.h> #include <linux/moduleparam.h> -#include <asm/scatterlist.h> +#include <linux/scatterlist.h> #include <linux/usb.h> @@ -381,7 +381,6 @@ alloc_sglist (int nents, int max, int vary) sg = kmalloc (nents * sizeof *sg, SLAB_KERNEL); if (!sg) return NULL; - memset (sg, 0, nents * sizeof *sg); for (i = 0; i < nents; i++) { char *buf; @@ -394,9 +393,7 @@ alloc_sglist (int nents, int max, int vary) memset (buf, 0, size); /* kmalloc pages are always physically contiguous! */ - sg [i].page = virt_to_page (buf); - sg [i].offset = offset_in_page (buf); - sg [i].length = size; + sg_init_one(&sg[i], buf, size); if (vary) { size += vary; |