Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (82 commits)
  [NET]: Make sure sockets implement splice_read
  netconsole: avoid null pointer dereference at show_local_mac()
  [IPV6]: Fix reversed local_df test in ip6_fragment
  [XFRM]: Avoid bogus BUG() when throwing new policy away.
  [AF_KEY]: Fix bug in spdadd
  [NETFILTER] nf_conntrack_proto_tcp.c: Mistyped state corrected.
  net: xfrm statistics depend on INET
  [NETFILTER]: make secmark_tg_destroy() static
  [INET]: Unexport inet_listen_wlock
  [INET]: Unexport __inet_hash_connect
  [NET]: Improve cache line coherency of ingress qdisc
  [NET]: Fix race in dev_close(). (Bug 9750)
  [IPSEC]: Fix bogus usage of u64 on input sequence number
  [RTNETLINK]: Send a single notification on device state changes.
  [NETLABLE]: Hide netlbl_unlabel_audit_addr6 under ifdef CONFIG_IPV6.
  [NETLABEL]: Don't produce unused variables when IPv6 is off.
  [NETLABEL]: Compilation for CONFIG_AUDIT=n case.
  [GENETLINK]: Relax dances with genl_lock.
  [NETLABEL]: Fix lookup logic of netlbl_domhsh_search_def.
  [IPV6]: remove unused method declaration (net/ndisc.h).
  ...

24 files changed, 5441 insertions, 1794 deletions

diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index e68821d074b..7e31d5f1bc8 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -208,6 +208,7 @@ static int hci_uart_close(struct hci_dev *hdev)
 		return 0;
 
 	hci_uart_flush(hdev);
+	hdev->flush = NULL;
 	return 0;
 }
 
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index eef6fecfff2..be6e918456d 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -168,7 +168,7 @@ static int debug = -1;
  * Warning: 64K ring has hardware issues and may lock up.
  */
 #if defined(CONFIG_SH_DREAMCAST)
-#define RX_BUF_IDX	1	/* 16K ring */
+#define RX_BUF_IDX 0	/* 8K ring */
 #else
 #define RX_BUF_IDX	2	/* 32K ring */
 #endif
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 50c2b60e1fe..f337800076c 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -931,6 +931,14 @@ config ENC28J60_WRITEVERIFY
 	  Enable the verify after the buffer write useful for debugging purpose.
 	  If unsure, say N.
 
+config DM9000_DEBUGLEVEL
+	int "DM9000 maximum debug level"
+	depends on DM9000
+	default 4
+	help
+	  The maximum level of debugging code compiled into the DM9000
+	  driver.
+
 config SMC911X
 	tristate "SMSC LAN911[5678] support"
 	select CRC32
@@ -2352,6 +2360,16 @@ config GELIC_NET
 	  To compile this driver as a module, choose M here: the
 	  module will be called ps3_gelic.
 
+config GELIC_WIRELESS
+       bool "PS3 Wireless support"
+       depends on GELIC_NET
+       help
+        This option adds the support for the wireless feature of PS3.
+        If you have the wireless-less model of PS3 or have no plan to
+        use wireless feature, disabling this option saves memory.  As
+        the driver automatically distinguishes the models, you can
+        safely enable this option even if you have a wireless-less model.
+
 config GIANFAR
 	tristate "Gianfar Ethernet"
 	depends on FSL_SOC
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 9fc7794e88e..3b1ea321dc0 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -70,7 +70,8 @@ obj-$(CONFIG_BNX2X) += bnx2x.o
 spidernet-y += spider_net.o spider_net_ethtool.o
 obj-$(CONFIG_SPIDER_NET) += spidernet.o sungem_phy.o
 obj-$(CONFIG_GELIC_NET) += ps3_gelic.o
-ps3_gelic-objs += ps3_gelic_net.o
+gelic_wireless-$(CONFIG_GELIC_WIRELESS) += ps3_gelic_wireless.o
+ps3_gelic-objs += ps3_gelic_net.o $(gelic_wireless-y)
 obj-$(CONFIG_TC35815) += tc35815.o
 obj-$(CONFIG_SKGE) += skge.o
 obj-$(CONFIG_SKY2) += sky2.o
diff --git a/drivers/net/cxgb3/l2t.c b/drivers/net/cxgb3/l2t.c
index 17ed4c3527b..865faee53e1 100644
--- a/drivers/net/cxgb3/l2t.c
+++ b/drivers/net/cxgb3/l2t.c
@@ -404,7 +404,7 @@ found:
 			if (neigh->nud_state & NUD_FAILED) {
 				arpq = e->arpq_head;
 				e->arpq_head = e->arpq_tail = NULL;
-			} else if (neigh_is_connected(neigh))
+			} else if (neigh->nud_state & (NUD_CONNECTED|NUD_STALE))
 				setup_l2e_send_pending(dev, NULL, e);
 		} else {
 			e->state = neigh_is_connected(neigh) ?
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 9ca8c66abd1..979f3fc5e76 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -1059,6 +1059,14 @@ static void write_tx_pkt_wr(struct adapter *adap, struct sk_buff *skb,
 			 htonl(V_WR_TID(q->token)));
 }
 
+static inline void t3_stop_queue(struct net_device *dev, struct sge_qset *qs,
+				 struct sge_txq *q)
+{
+	netif_stop_queue(dev);
+	set_bit(TXQ_ETH, &qs->txq_stopped);
+	q->stops++;
+}
+
 /**
  *	eth_xmit - add a packet to the Ethernet Tx queue
  *	@skb: the packet
@@ -1090,31 +1098,18 @@ int t3_eth_xmit(struct sk_buff *skb, struct net_device *dev)
 	ndesc = calc_tx_descs(skb);
 
 	if (unlikely(credits < ndesc)) {
-		if (!netif_queue_stopped(dev)) {
-			netif_stop_queue(dev);
-			set_bit(TXQ_ETH, &qs->txq_stopped);
-			q->stops++;
-			dev_err(&adap->pdev->dev,
-				"%s: Tx ring %u full while queue awake!\n",
-				dev->name, q->cntxt_id & 7);
-		}
+		t3_stop_queue(dev, qs, q);
+		dev_err(&adap->pdev->dev,
+			"%s: Tx ring %u full while queue awake!\n",
+			dev->name, q->cntxt_id & 7);
 		spin_unlock(&q->lock);
 		return NETDEV_TX_BUSY;
 	}
 
 	q->in_use += ndesc;
-	if (unlikely(credits - ndesc < q->stop_thres)) {
-		q->stops++;
-		netif_stop_queue(dev);
-		set_bit(TXQ_ETH, &qs->txq_stopped);
-#if !USE_GTS
-		if (should_restart_tx(q) &&
-		    test_and_clear_bit(TXQ_ETH, &qs->txq_stopped)) {
-			q->restarts++;
-			netif_wake_queue(dev);
-		}
-#endif
-	}
+	if (unlikely(credits - ndesc < q->stop_thres))
+		if (USE_GTS || !should_restart_tx(q))
+			t3_stop_queue(dev, qs, q);
 
 	gen = q->gen;
 	q->unacked += ndesc;
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index 6a20a5491a9..1fe305ca2cf 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -1,7 +1,5 @@
 /*
- *   dm9000.c: Version 1.2 03/18/2003
- *
- *         A Davicom DM9000 ISA NIC fast Ethernet driver for Linux.
+ *      Davicom DM9000 Fast Ethernet driver for Linux.
  * 	Copyright (C) 1997  Sten Wang
  *
  * 	This program is free software; you can redistribute it and/or
@@ -14,44 +12,11 @@
  * 	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * 	GNU General Public License for more details.
  *
- *   (C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved.
- *
- * V0.11	06/20/2001	REG_0A bit3=1, default enable BP with DA match
- * 	06/22/2001 	Support DM9801 progrmming
- * 	 	 	E3: R25 = ((R24 + NF) & 0x00ff) | 0xf000
- * 		 	E4: R25 = ((R24 + NF) & 0x00ff) | 0xc200
- * 		     		R17 = (R17 & 0xfff0) | NF + 3
- * 		 	E5: R25 = ((R24 + NF - 3) & 0x00ff) | 0xc200
- * 		     		R17 = (R17 & 0xfff0) | NF
- *
- * v1.00               	modify by simon 2001.9.5
- *                         change for kernel 2.4.x
- *
- * v1.1   11/09/2001      	fix force mode bug
- *
- * v1.2   03/18/2003       Weilun Huang <weilun_huang@davicom.com.tw>:
- * 			Fixed phy reset.
- * 			Added tx/rx 32 bit mode.
- * 			Cleaned up for kernel merge.
- *
- *        03/03/2004    Sascha Hauer <s.hauer@pengutronix.de>
- *                      Port to 2.6 kernel
- *
- *	  24-Sep-2004   Ben Dooks <ben@simtec.co.uk>
- *			Cleanup of code to remove ifdefs
- *			Allowed platform device data to influence access width
- *			Reformatting areas of code
- *
- *        17-Mar-2005   Sascha Hauer <s.hauer@pengutronix.de>
- *                      * removed 2.4 style module parameters
- *                      * removed removed unused stat counter and fixed
- *                        net_device_stats
- *                      * introduced tx_timeout function
- *                      * reworked locking
+ * (C) Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved.
  *
- *	  01-Jul-2005   Ben Dooks <ben@simtec.co.uk>
- *			* fixed spinlock call without pointer
- *			* ensure spinlock is initialised
+ * Additional updates, Copyright:
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Sascha Hauer <s.hauer@pengutronix.de>
  */
 
 #include <linux/module.h>
@@ -63,6 +28,7 @@
 #include <linux/spinlock.h>
 #include <linux/crc32.h>
 #include <linux/mii.h>
+#include <linux/ethtool.h>
 #include <linux/dm9000.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
@@ -80,30 +46,7 @@
 
 #define CARDNAME "dm9000"
 #define PFX CARDNAME ": "
-
-#define DM9000_TIMER_WUT  jiffies+(HZ*2)	/* timer wakeup time : 2 second */
-
-#define DM9000_DEBUG 0
-
-#if DM9000_DEBUG > 2
-#define PRINTK3(args...)  printk(CARDNAME ": " args)
-#else
-#define PRINTK3(args...)  do { } while(0)
-#endif
-
-#if DM9000_DEBUG > 1
-#define PRINTK2(args...)  printk(CARDNAME ": " args)
-#else
-#define PRINTK2(args...)  do { } while(0)
-#endif
-
-#if DM9000_DEBUG > 0
-#define PRINTK1(args...)  printk(CARDNAME ": " args)
-#define PRINTK(args...)   printk(CARDNAME ": " args)
-#else
-#define PRINTK1(args...)  do { } while(0)
-#define PRINTK(args...)   printk(KERN_DEBUG args)
-#endif
+#define DRV_VERSION	"1.30"
 
 #ifdef CONFIG_BLACKFIN
 #define readsb	insb
@@ -112,9 +55,9 @@
 #define writesb	outsb
 #define writesw	outsw
 #define writesl	outsl
-#define DM9000_IRQ_FLAGS	(IRQF_SHARED | IRQF_TRIGGER_HIGH)
+#define DEFAULT_TRIGGER IRQF_TRIGGER_HIGH
 #else
-#define DM9000_IRQ_FLAGS	(IRQF_SHARED | IRQT_RISING)
+#define DEFAULT_TRIGGER (0)
 #endif
 
 /*
@@ -124,6 +67,24 @@ static int watchdog = 5000;
 module_param(watchdog, int, 0400);
 MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds");
 
+/* DM9000 register address locking.
+ *
+ * The DM9000 uses an address register to control where data written
+ * to the data register goes. This means that the address register
+ * must be preserved over interrupts or similar calls.
+ *
+ * During interrupt and other critical calls, a spinlock is used to
+ * protect the system, but the calls themselves save the address
+ * in the address register in case they are interrupting another
+ * access to the device.
+ *
+ * For general accesses a lock is provided so that calls which are
+ * allowed to sleep are serialised so that the address register does
+ * not need to be saved. This lock also serves to serialise access
+ * to the EEPROM and PHY access registers which are shared between
+ * these two devices.
+ */
+
 /* Structure/enum declaration ------------------------------- */
 typedef struct board_info {
 
@@ -137,33 +98,52 @@ typedef struct board_info {
 	u16 dbug_cnt;
 	u8 io_mode;		/* 0:word, 2:byte */
 	u8 phy_addr;
+	unsigned int flags;
+	unsigned int in_suspend :1;
+
+	int debug_level;
 
 	void (*inblk)(void __iomem *port, void *data, int length);
 	void (*outblk)(void __iomem *port, void *data, int length);
 	void (*dumpblk)(void __iomem *port, int length);
 
+	struct device	*dev;	     /* parent device */
+
 	struct resource	*addr_res;   /* resources found */
 	struct resource *data_res;
 	struct resource	*addr_req;   /* resources requested */
 	struct resource *data_req;
 	struct resource *irq_res;
 
-	struct timer_list timer;
-	unsigned char srom[128];
+	struct mutex	 addr_lock;	/* phy and eeprom access lock */
+
 	spinlock_t lock;
 
 	struct mii_if_info mii;
 	u32 msg_enable;
 } board_info_t;
 
+/* debug code */
+
+#define dm9000_dbg(db, lev, msg...) do {		\
+	if ((lev) < CONFIG_DM9000_DEBUGLEVEL &&		\
+	    (lev) < db->debug_level) {			\
+		dev_dbg(db->dev, msg);			\
+	}						\
+} while (0)
+
+static inline board_info_t *to_dm9000_board(struct net_device *dev)
+{
+	return dev->priv;
+}
+
 /* function declaration ------------------------------------- */
 static int dm9000_probe(struct platform_device *);
 static int dm9000_open(struct net_device *);
 static int dm9000_start_xmit(struct sk_buff *, struct net_device *);
 static int dm9000_stop(struct net_device *);
+static int dm9000_ioctl(struct net_device *dev, struct ifreq *req, int cmd);
 
-
-static void dm9000_timer(unsigned long);
 static void dm9000_init_dm9000(struct net_device *);
 
 static irqreturn_t dm9000_interrupt(int, void *);
@@ -171,20 +151,19 @@ static irqreturn_t dm9000_interrupt(int, void *);
 static int dm9000_phy_read(struct net_device *dev, int phyaddr_unsused, int reg);
 static void dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg,
 			   int value);
-static u16 read_srom_word(board_info_t *, int);
+
+static void dm9000_read_eeprom(board_info_t *, int addr, u8 *to);
+static void dm9000_write_eeprom(board_info_t *, int addr, u8 *dp);
 static void dm9000_rx(struct net_device *);
 static void dm9000_hash_table(struct net_device *);
 
-//#define DM9000_PROGRAM_EEPROM
-#ifdef DM9000_PROGRAM_EEPROM
-static void program_eeprom(board_info_t * db);
-#endif
 /* DM9000 network board routine ---------------------------- */
 
 static void
 dm9000_reset(board_info_t * db)
 {
-	PRINTK1("dm9000x: resetting\n");
+	dev_dbg(db->dev, "resetting device\n");
+
 	/* RESET device */
 	writeb(DM9000_NCR, db->io_addr);
 	udelay(200);
@@ -300,14 +279,10 @@ static void dm9000_set_io(struct board_info *db, int byte_width)
 		db->inblk   = dm9000_inblk_8bit;
 		break;
 
-	case 2:
-		db->dumpblk = dm9000_dumpblk_16bit;
-		db->outblk  = dm9000_outblk_16bit;
-		db->inblk   = dm9000_inblk_16bit;
-		break;
 
 	case 3:
-		printk(KERN_ERR PFX ": 3 byte IO, falling back to 16bit\n");
+		dev_dbg(db->dev, ": 3 byte IO, falling back to 16bit\n");
+	case 2:
 		db->dumpblk = dm9000_dumpblk_16bit;
 		db->outblk  = dm9000_outblk_16bit;
 		db->inblk   = dm9000_inblk_16bit;
@@ -358,6 +333,139 @@ static void dm9000_poll_controller(struct net_device *dev)
 }
 #endif
 
+static int dm9000_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
+{
+	board_info_t *dm = to_dm9000_board(dev);
+
+	if (!netif_running(dev))
+		return -EINVAL;
+
+	return generic_mii_ioctl(&dm->mii, if_mii(req), cmd, NULL);
+}
+
+/* ethtool ops */
+
+static void dm9000_get_drvinfo(struct net_device *dev,
+			       struct ethtool_drvinfo *info)
+{
+	board_info_t *dm = to_dm9000_board(dev);
+
+	strcpy(info->driver, CARDNAME);
+	strcpy(info->version, DRV_VERSION);
+	strcpy(info->bus_info, to_platform_device(dm->dev)->name);
+}
+
+static u32 dm9000_get_msglevel(struct net_device *dev)
+{
+	board_info_t *dm = to_dm9000_board(dev);
+
+	return dm->msg_enable;
+}
+
+static void dm9000_set_msglevel(struct net_device *dev, u32 value)
+{
+	board_info_t *dm = to_dm9000_board(dev);
+
+	dm->msg_enable = value;
+}
+
+static int dm9000_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	board_info_t *dm = to_dm9000_board(dev);
+
+	mii_ethtool_gset(&dm->mii, cmd);
+	return 0;
+}
+
+static int dm9000_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	board_info_t *dm = to_dm9000_board(dev);
+
+	return mii_ethtool_sset(&dm->mii, cmd);
+}
+
+static int dm9000_nway_reset(struct net_device *dev)
+{
+	board_info_t *dm = to_dm9000_board(dev);
+	return mii_nway_restart(&dm->mii);
+}
+
+static u32 dm9000_get_link(struct net_device *dev)
+{
+	board_info_t *dm = to_dm9000_board(dev);
+	return mii_link_ok(&dm->mii);
+}
+
+#define DM_EEPROM_MAGIC		(0x444D394B)
+
+static int dm9000_get_eeprom_len(struct net_device *dev)
+{
+	return 128;
+}
+
+static int dm9000_get_eeprom(struct net_device *dev,
+			     struct ethtool_eeprom *ee, u8 *data)
+{
+	board_info_t *dm = to_dm9000_board(dev);
+	int offset = ee->offset;
+	int len = ee->len;
+	int i;
+
+	/* EEPROM access is aligned to two bytes */
+
+	if ((len & 1) != 0 || (offset & 1) != 0)
+		return -EINVAL;
+
+	if (dm->flags & DM9000_PLATF_NO_EEPROM)
+		return -ENOENT;
+
+	ee->magic = DM_EEPROM_MAGIC;
+
+	for (i = 0; i < len; i += 2)
+		dm9000_read_eeprom(dm, (offset + i) / 2, data + i);
+
+	return 0;
+}
+
+static int dm9000_set_eeprom(struct net_device *dev,
+			     struct ethtool_eeprom *ee, u8 *data)
+{
+	board_info_t *dm = to_dm9000_board(dev);
+	int offset = ee->offset;
+	int len = ee->len;
+	int i;
+
+	/* EEPROM access is aligned to two bytes */
+
+	if ((len & 1) != 0 || (offset & 1) != 0)
+		return -EINVAL;
+
+	if (dm->flags & DM9000_PLATF_NO_EEPROM)
+		return -ENOENT;
+
+	if (ee->magic != DM_EEPROM_MAGIC)
+		return -EINVAL;
+
+	for (i = 0; i < len; i += 2)
+		dm9000_write_eeprom(dm, (offset + i) / 2, data + i);
+
+	return 0;
+}
+
+static const struct ethtool_ops dm9000_ethtool_ops = {
+	.get_drvinfo		= dm9000_get_drvinfo,
+	.get_settings		= dm9000_get_settings,
+	.set_settings		= dm9000_set_settings,
+	.get_msglevel		= dm9000_get_msglevel,
+	.set_msglevel		= dm9000_set_msglevel,
+	.nway_reset		= dm9000_nway_reset,
+	.get_link		= dm9000_get_link,
+ 	.get_eeprom_len		= dm9000_get_eeprom_len,
+ 	.get_eeprom		= dm9000_get_eeprom,
+ 	.set_eeprom		= dm9000_set_eeprom,
+};
+
+
 /* dm9000_release_board
  *
  * release a board, and any mapped resources
@@ -401,6 +509,7 @@ dm9000_probe(struct platform_device *pdev)
 	struct dm9000_plat_data *pdata = pdev->dev.platform_data;
 	struct board_info *db;	/* Point a board information structure */
 	struct net_device *ndev;
+	const unsigned char *mac_src;
 	unsigned long base;
 	int ret = 0;
 	int iosize;
@@ -410,19 +519,22 @@ dm9000_probe(struct platform_device *pdev)
 	/* Init network device */
 	ndev = alloc_etherdev(sizeof (struct board_info));
 	if (!ndev) {
-		printk("%s: could not allocate device.\n", CARDNAME);
+		dev_err(&pdev->dev, "could not allocate device.\n");
 		return -ENOMEM;
 	}
 
 	SET_NETDEV_DEV(ndev, &pdev->dev);
 
-	PRINTK2("dm9000_probe()");
+	dev_dbg(&pdev->dev, "dm9000_probe()");
 
 	/* setup board info structure */
 	db = (struct board_info *) ndev->priv;
 	memset(db, 0, sizeof (*db));
 
+	db->dev = &pdev->dev;
+
 	spin_lock_init(&db->lock);
+	mutex_init(&db->addr_lock);
 
 	if (pdev->num_resources < 2) {
 		ret = -ENODEV;
@@ -450,7 +562,7 @@ dm9000_probe(struct platform_device *pdev)
 
 		if (db->addr_res == NULL || db->data_res == NULL ||
 		    db->irq_res == NULL) {
-			printk(KERN_ERR PFX "insufficient resources\n");
+			dev_err(db->dev, "insufficient resources\n");
 			ret = -ENOENT;
 			goto out;
 		}
@@ -460,7 +572,7 @@ dm9000_probe(struct platform_device *pdev)
 						  pdev->name);
 
 		if (db->addr_req == NULL) {
-			printk(KERN_ERR PFX "cannot claim address reg area\n");
+			dev_err(db->dev, "cannot claim address reg area\n");
 			ret = -EIO;
 			goto out;
 		}
@@ -468,7 +580,7 @@ dm9000_probe(struct platform_device *pdev)
 		db->io_addr = ioremap(db->addr_res->start, i);
 
 		if (db->io_addr == NULL) {
-			printk(KERN_ERR "failed to ioremap address reg\n");
+			dev_err(db->dev, "failed to ioremap address reg\n");
 			ret = -EINVAL;
 			goto out;
 		}
@@ -478,7 +590,7 @@ dm9000_probe(struct platform_device *pdev)
 						  pdev->name);
 
 		if (db->data_req == NULL) {
-			printk(KERN_ERR PFX "cannot claim data reg area\n");
+			dev_err(db->dev, "cannot claim data reg area\n");
 			ret = -EIO;
 			goto out;
 		}
@@ -486,7 +598,7 @@ dm9000_probe(struct platform_device *pdev)
 		db->io_data = ioremap(db->data_res->start, iosize);
 
 		if (db->io_data == NULL) {
-			printk(KERN_ERR "failed to ioremap data reg\n");
+			dev_err(db->dev,"failed to ioremap data reg\n");
 			ret = -EINVAL;
 			goto out;
 		}
@@ -525,12 +637,14 @@ dm9000_probe(struct platform_device *pdev)
 
 		if (pdata->dumpblk != NULL)
 			db->dumpblk = pdata->dumpblk;
+
+		db->flags = pdata->flags;
 	}
 
 	dm9000_reset(db);
 
 	/* try two times, DM9000 sometimes gets the first read wrong */
-	for (i = 0; i < 2; i++) {
+	for (i = 0; i < 8; i++) {
 		id_val  = ior(db, DM9000_VIDL);
 		id_val |= (u32)ior(db, DM9000_VIDH) << 8;
 		id_val |= (u32)ior(db, DM9000_PIDL) << 16;
@@ -538,11 +652,11 @@ dm9000_probe(struct platform_device *pdev)
 
 		if (id_val == DM9000_ID)
 			break;
-		printk("%s: read wrong id 0x%08x\n", CARDNAME, id_val);
+		dev_err(db->dev, "read wrong id 0x%08x\n", id_val);
 	}
 
 	if (id_val != DM9000_ID) {
-		printk("%s: wrong id: 0x%08x\n", CARDNAME, id_val);
+		dev_err(db->dev, "wrong id: 0x%08x\n", id_val);
 		ret = -ENODEV;
 		goto out;
 	}
@@ -558,13 +672,13 @@ dm9000_probe(struct platform_device *pdev)
 	ndev->watchdog_timeo = msecs_to_jiffies(watchdog);
 	ndev->stop		 = &dm9000_stop;
 	ndev->set_multicast_list = &dm9000_hash_table;
+	ndev->ethtool_ops	 = &dm9000_ethtool_ops;
+	ndev->do_ioctl		 = &dm9000_ioctl;
+
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	ndev->poll_controller	 = &dm9000_poll_controller;
 #endif
 
-#ifdef DM9000_PROGRAM_EEPROM
-	program_eeprom(db);
-#endif
 	db->msg_enable       = NETIF_MSG_LINK;
 	db->mii.phy_id_mask  = 0x1f;
 	db->mii.reg_num_mask = 0x1f;
@@ -574,38 +688,37 @@ dm9000_probe(struct platform_device *pdev)
 	db->mii.mdio_read    = dm9000_phy_read;
 	db->mii.mdio_write   = dm9000_phy_write;
 
-	/* Read SROM content */
-	for (i = 0; i < 64; i++)
-		((u16 *) db->srom)[i] = read_srom_word(db, i);
+	mac_src = "eeprom";
 
-	/* Set Node Address */
-	for (i = 0; i < 6; i++)
-		ndev->dev_addr[i] = db->srom[i];
+	/* try reading the node address from the attached EEPROM */
+	for (i = 0; i < 6; i += 2)
+		dm9000_read_eeprom(db, i / 2, ndev->dev_addr+i);
 
 	if (!is_valid_ether_addr(ndev->dev_addr)) {
 		/* try reading from mac */
-
+		
+		mac_src = "chip";
 		for (i = 0; i < 6; i++)
 			ndev->dev_addr[i] = ior(db, i+DM9000_PAR);
 	}
 
 	if (!is_valid_ether_addr(ndev->dev_addr))
-		printk("%s: Invalid ethernet MAC address.  Please "
-		       "set using ifconfig\n", ndev->name);
+		dev_warn(db->dev, "%s: Invalid ethernet MAC address. Please "
+			 "set using ifconfig\n", ndev->name);
 
 	platform_set_drvdata(pdev, ndev);
 	ret = register_netdev(ndev);
 
 	if (ret == 0) {
 		DECLARE_MAC_BUF(mac);
-		printk("%s: dm9000 at %p,%p IRQ %d MAC: %s\n",
+		printk("%s: dm9000 at %p,%p IRQ %d MAC: %s (%s)\n",
 		       ndev->name,  db->io_addr, db->io_data, ndev->irq,
-		       print_mac(mac, ndev->dev_addr));
+		       print_mac(mac, ndev->dev_addr), mac_src);
 	}
 	return 0;
 
 out:
-	printk("%s: not found (%d).\n", CARDNAME, ret);
+	dev_err(db->dev, "not found (%d).\n", ret);
 
 	dm9000_release_board(pdev, db);
 	free_netdev(ndev);
@@ -621,10 +734,22 @@ static int
 dm9000_open(struct net_device *dev)
 {
 	board_info_t *db = (board_info_t *) dev->priv;
+	unsigned long irqflags = db->irq_res->flags & IRQF_TRIGGER_MASK;
 
-	PRINTK2("entering dm9000_open\n");
+	if (netif_msg_ifup(db))
+		dev_dbg(db->dev, "enabling %s\n", dev->name);
 
-	if (request_irq(dev->irq, &dm9000_interrupt, DM9000_IRQ_FLAGS, dev->name, dev))
+	/* If there is no IRQ type specified, default to something that
+	 * may work, and tell the user that this is a problem */
+
+	if (irqflags == IRQF_TRIGGER_NONE) {
+		dev_warn(db->dev, "WARNING: no IRQ resource flags set.\n");
+		irqflags = DEFAULT_TRIGGER;
+	}
+	
+	irqflags |= IRQF_SHARED;
+
+	if (request_irq(dev->irq, &dm9000_interrupt, irqflags, dev->name, dev))
 		return -EAGAIN;
 
 	/* Initialize DM9000 board */
@@ -634,13 +759,6 @@ dm9000_open(struct net_device *dev)
 	/* Init driver variable */
 	db->dbug_cnt = 0;
 
-	/* set and active a timer process */
-	init_timer(&db->timer);
-	db->timer.expires  = DM9000_TIMER_WUT;
-	db->timer.data     = (unsigned long) dev;
-	db->timer.function = &dm9000_timer;
-	add_timer(&db->timer);
-
 	mii_check_media(&db->mii, netif_msg_link(db), 1);
 	netif_start_queue(dev);
 
@@ -655,7 +773,7 @@ dm9000_init_dm9000(struct net_device *dev)
 {
 	board_info_t *db = (board_info_t *) dev->priv;
 
-	PRINTK1("entering %s\n",__FUNCTION__);
+	dm9000_dbg(db, 1, "entering %s\n", __func__);
 
 	/* I/O mode */
 	db->io_mode = ior(db, DM9000_ISR) >> 6;	/* ISR bit7:6 keeps I/O mode */
@@ -665,6 +783,9 @@ dm9000_init_dm9000(struct net_device *dev)
 	iow(db, DM9000_GPCR, GPCR_GEP_CNTL);	/* Let GPIO0 output */
 	iow(db, DM9000_GPR, 0);	/* Enable PHY */
 
+	if (db->flags & DM9000_PLATF_EXT_PHY)
+		iow(db, DM9000_NCR, NCR_EXT_PHY);
+
 	/* Program operating register */
 	iow(db, DM9000_TCR, 0);	        /* TX Polling clear */
 	iow(db, DM9000_BPTR, 0x3f);	/* Less 3Kb, 200us */
@@ -698,7 +819,7 @@ dm9000_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	unsigned long flags;
 	board_info_t *db = (board_info_t *) dev->priv;
 
-	PRINTK3("dm9000_start_xmit\n");
+	dm9000_dbg(db, 3, "%s:\n", __func__);
 
 	if (db->tx_pkt_cnt > 1)
 		return 1;
@@ -715,8 +836,8 @@ dm9000_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* TX control: First packet immediately send, second packet queue */
 	if (db->tx_pkt_cnt == 1) {
 		/* Set TX length to DM9000 */
-		iow(db, DM9000_TXPLL, skb->len & 0xff);
-		iow(db, DM9000_TXPLH, (skb->len >> 8) & 0xff);
+		iow(db, DM9000_TXPLL, skb->len);
+		iow(db, DM9000_TXPLH, skb->len >> 8);
 
 		/* Issue TX polling command */
 		iow(db, DM9000_TCR, TCR_TXREQ);	/* Cleared after TX complete */
@@ -757,10 +878,8 @@ dm9000_stop(struct net_device *ndev)
 {
 	board_info_t *db = (board_info_t *) ndev->priv;
 
-	PRINTK1("entering %s\n",__FUNCTION__);
-
-	/* deleted timer */
-	del_timer(&db->timer);
+	if (netif_msg_ifdown(db))
+		dev_dbg(db->dev, "shutting down %s\n", ndev->name);
 
 	netif_stop_queue(ndev);
 	netif_carrier_off(ndev);
@@ -788,10 +907,13 @@ dm9000_tx_done(struct net_device *dev, board_info_t * db)
 		db->tx_pkt_cnt--;
 		dev->stats.tx_packets++;
 
+		if (netif_msg_tx_done(db))
+			dev_dbg(db->dev, "tx done, NSR %02x\n", tx_status);
+
 		/* Queue packet check & send */
 		if (db->tx_pkt_cnt > 0) {
-			iow(db, DM9000_TXPLL, db->queue_pkt_len & 0xff);
-			iow(db, DM9000_TXPLH, (db->queue_pkt_len >> 8) & 0xff);
+			iow(db, DM9000_TXPLL, db->queue_pkt_len);
+			iow(db, DM9000_TXPLH, db->queue_pkt_len >> 8);
 			iow(db, DM9000_TCR, TCR_TXREQ);
 			dev->trans_start = jiffies;
 		}
@@ -803,19 +925,14 @@ static irqreturn_t
 dm9000_interrupt(int irq, void *dev_id)
 {
 	struct net_device *dev = dev_id;
-	board_info_t *db;
+	board_info_t *db = (board_info_t *) dev->priv;
 	int int_status;
 	u8 reg_save;
 
-	PRINTK3("entering %s\n",__FUNCTION__);
-
-	if (!dev) {
-		PRINTK1("dm9000_interrupt() without DEVICE arg\n");
-		return IRQ_HANDLED;
-	}
+	dm9000_dbg(db, 3, "entering %s\n", __func__);
 
 	/* A real interrupt coming */
-	db = (board_info_t *) dev->priv;
+
 	spin_lock(&db->lock);
 
 	/* Save previous register address */
@@ -828,6 +945,9 @@ dm9000_interrupt(int irq, void *dev_id)
 	int_status = ior(db, DM9000_ISR);	/* Got ISR */
 	iow(db, DM9000_ISR, int_status);	/* Clear ISR status */
 
+	if (netif_msg_intr(db))
+		dev_dbg(db->dev, "interrupt status %02x\n", int_status);
+
 	/* Received the coming packet */
 	if (int_status & ISR_PRS)
 		dm9000_rx(dev);
@@ -847,27 +967,9 @@ dm9000_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-/*
- *  A periodic timer routine
- *  Dynamic media sense, allocated Rx buffer...
- */
-static void
-dm9000_timer(unsigned long data)
-{
-	struct net_device *dev = (struct net_device *) data;
-	board_info_t *db = (board_info_t *) dev->priv;
-
-	PRINTK3("dm9000_timer()\n");
-
-	mii_check_media(&db->mii, netif_msg_link(db), 0);
-
-	/* Set timer again */
-	db->timer.expires = DM9000_TIMER_WUT;
-	add_timer(&db->timer);
-}
-
 struct dm9000_rxhdr {
-	u16	RxStatus;
+	u8	RxPktReady;
+	u8	RxStatus;
 	u16	RxLen;
 } __attribute__((__packed__));
 
@@ -893,7 +995,7 @@ dm9000_rx(struct net_device *dev)
 
 		/* Status check: this byte must be 0 or 1 */
 		if (rxbyte > DM9000_PKT_RDY) {
-			printk("status check failed: %d\n", rxbyte);
+			dev_warn(db->dev, "status check fail: %d\n", rxbyte);
 			iow(db, DM9000_RCR, 0x00);	/* Stop Device */
 			iow(db, DM9000_ISR, IMR_PAR);	/* Stop INT request */
 			return;
@@ -908,30 +1010,38 @@ dm9000_rx(struct net_device *dev)
 
 		(db->inblk)(db->io_data, &rxhdr, sizeof(rxhdr));
 
-		RxLen = rxhdr.RxLen;
+		RxLen = le16_to_cpu(rxhdr.RxLen);
+