Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (95 commits)
  ide-tape: remove idetape_config_t typedef
  ide-tape: remove mtio.h related comments
  ide-tape: make function name more accurate
  ide-tape: remove unused sense packet commands.
  ide-tape: use generic byteorder macros
  ide-tape: remove EXPERIMENTAL driver status
  ide-tape: use generic scsi commands
  ide-tape: remove struct idetape_block_size_page_t
  ide-tape: remove structs os_partition_t, os_dat_entry_t, os_dat_t
  ide-tape: remove struct idetape_parameter_block_descriptor_t
  ide-tape: remove struct idetape_medium_partition_page_t
  ide-tape: remove struct idetape_data_compression_page_t
  ide-tape: remove struct idetape_inquiry_result_t
  ide-tape: remove struct idetape_capabilities_page_t
  ide-tape: remove IDETAPE_DEBUG_BUGS
  ide-tape: remove IDETAPE_DEBUG_INFO
  ide-tape: dump gcw fields on error in idetape_identify_device()
  ide-tape: remove struct idetape_mode_parameter_header_t
  ide-tape: remove struct idetape_request_sense_result_t
  ide-tape: remove dead code
  ...

73 files changed, 1550 insertions, 2830 deletions

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index e42a465f571..45b26ed351c 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -216,8 +216,7 @@ config BLK_DEV_IDECD_VERBOSE_ERRORS
 	  memory, though.
 
 config BLK_DEV_IDETAPE
-	tristate "Include IDE/ATAPI TAPE support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	tristate "Include IDE/ATAPI TAPE support"
 	help
 	  If you have an IDE tape drive using the ATAPI protocol, say Y.
 	  ATAPI is a newer protocol used by IDE tape and CD-ROM drives,
diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c
index 037300fa284..0e7574c0ee6 100644
--- a/drivers/ide/arm/bast-ide.c
+++ b/drivers/ide/arm/bast-ide.c
@@ -28,8 +28,10 @@ static int __init
 bastide_register(unsigned int base, unsigned int aux, int irq,
 		 ide_hwif_t **hwif)
 {
+	ide_hwif_t *hwif;
 	hw_regs_t hw;
 	int i;
+	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
 	memset(&hw, 0, sizeof(hw));
 
@@ -44,8 +46,24 @@ bastide_register(unsigned int base, unsigned int aux, int irq,
 	hw.io_ports[IDE_CONTROL_OFFSET] = aux + (6 * 0x20);
 	hw.irq = irq;
 
-	ide_register_hw(&hw, NULL, hwif);
+	hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]);
+	if (hwif == NULL)
+		goto out;
 
+	i = hwif->index;
+
+	if (hwif->present)
+		ide_unregister(i, 0, 0);
+	else if (!hwif->hold)
+		ide_init_port_data(hwif, i);
+
+	ide_init_port_hw(hwif, &hw);
+	hwif->quirkproc = NULL;
+
+	idx[0] = i;
+
+	ide_device_add(idx, NULL);
+out:
 	return 0;
 }
 
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index 8d2cc47a362..fb00f3827ec 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -377,9 +377,6 @@ static void icside_dma_lost_irq(ide_drive_t *drive)
 
 static void icside_dma_init(ide_hwif_t *hwif)
 {
-	hwif->mwdma_mask	= 7; /* MW0..2 */
-	hwif->swdma_mask	= 7; /* SW0..2 */
-
 	hwif->dmatable_cpu	= NULL;
 	hwif->dmatable_dma	= 0;
 	hwif->set_dma_mode	= icside_set_dma_mode;
@@ -459,11 +456,19 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec)
 
 	idx[0] = hwif->index;
 
-	ide_device_add(idx);
+	ide_device_add(idx, NULL);
 
 	return 0;
 }
 
+static const struct ide_port_info icside_v6_port_info __initdata = {
+	.host_flags		= IDE_HFLAG_SERIALIZE |
+				  IDE_HFLAG_NO_DMA | /* no SFF-style DMA */
+				  IDE_HFLAG_NO_AUTOTUNE,
+	.mwdma_mask		= ATA_MWDMA2,
+	.swdma_mask		= ATA_SWDMA2,
+};
+
 static int __init
 icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 {
@@ -472,6 +477,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 	unsigned int sel = 0;
 	int ret;
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
+	struct ide_port_info d = icside_v6_port_info;
 
 	ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
 	if (!ioc_base) {
@@ -521,30 +527,25 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 	state->hwif[1]    = mate;
 
 	hwif->maskproc    = icside_maskproc;
-	hwif->channel     = 0;
 	hwif->hwif_data   = state;
-	hwif->mate        = mate;
-	hwif->serialized  = 1;
 	hwif->config_data = (unsigned long)ioc_base;
 	hwif->select_data = sel;
 
 	mate->maskproc    = icside_maskproc;
-	mate->channel     = 1;
 	mate->hwif_data   = state;
-	mate->mate        = hwif;
-	mate->serialized  = 1;
 	mate->config_data = (unsigned long)ioc_base;
 	mate->select_data = sel | 1;
 
 	if (ec->dma != NO_DMA && !request_dma(ec->dma, hwif->name)) {
 		icside_dma_init(hwif);
 		icside_dma_init(mate);
-	}
+	} else
+		d.mwdma_mask = d.swdma_mask = 0;
 
 	idx[0] = hwif->index;
 	idx[1] = mate->index;
 
-	ide_device_add(idx);
+	ide_device_add(idx, &d);
 
 	return 0;
 
diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c
index 60f2497542c..43a70e91363 100644
--- a/drivers/ide/arm/ide_arm.c
+++ b/drivers/ide/arm/ide_arm.c
@@ -39,7 +39,7 @@ static int __init ide_arm_init(void)
 		ide_init_port_hw(hwif, &hw);
 		idx[0] = hwif->index;
 
-		ide_device_add(idx);
+		ide_device_add(idx, NULL);
 	}
 
 	return 0;
diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c
index c8b6581e624..efba00d2fc3 100644
--- a/drivers/ide/arm/rapide.c
+++ b/drivers/ide/arm/rapide.c
@@ -58,7 +58,7 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
 
 		idx[0] = hwif->index;
 
-		ide_device_add(idx);
+		ide_device_add(idx, NULL);
 
 		ecard_set_drvdata(ec, hwif);
 		goto out;
@@ -76,7 +76,7 @@ static void __devexit rapide_remove(struct expansion_card *ec)
 
 	ecard_set_drvdata(ec, NULL);
 
-	ide_unregister(hwif->index);
+	ide_unregister(hwif->index, 0, 0);
 
 	ecard_release_resources(ec);
 }
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index 0640a38ff12..00587a8c2ba 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -753,6 +753,15 @@ static void cris_set_dma_mode(ide_drive_t *drive, const u8 speed)
 		cris_ide_set_speed(TYPE_DMA, 0, strobe, hold);
 }
 
+static const struct ide_port_info cris_port_info __initdata = {
+	.chipset		= ide_etrax100,
+	.host_flags		= IDE_HFLAG_NO_ATAPI_DMA |
+				  IDE_HFLAG_NO_DMA, /* no SFF-style DMA */
+	.pio_mask		= ATA_PIO4,
+	.udma_mask		= cris_ultra_mask,
+	.mwdma_mask		= ATA_MWDMA2,
+};
+
 static int __init init_e100_ide(void)
 {
 	hw_regs_t hw;
@@ -780,7 +789,6 @@ static int __init init_e100_ide(void)
 		ide_init_port_data(hwif, hwif->index);
 		ide_init_port_hw(hwif, &hw);
 		hwif->mmio = 1;
-		hwif->chipset = ide_etrax100;
 		hwif->set_pio_mode = &cris_set_pio_mode;
 		hwif->set_dma_mode = &cris_set_dma_mode;
 		hwif->ata_input_data = &cris_ide_input_data;
@@ -799,12 +807,6 @@ static int __init init_e100_ide(void)
 		hwif->INB = &cris_ide_inb;
 		hwif->INW = &cris_ide_inw;
 		hwif->cbl = ATA_CBL_PATA40;
-		hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
-		hwif->pio_mask = ATA_PIO4,
-		hwif->drives[0].autotune = 1;
-		hwif->drives[1].autotune = 1;
-		hwif->ultra_mask = cris_ultra_mask;
-		hwif->mwdma_mask = 0x07; /* Multiword DMA 0-2 */
 
 		idx[h] = hwif->index;
 	}
@@ -820,7 +822,7 @@ static int __init init_e100_ide(void)
 	cris_ide_set_speed(TYPE_DMA, 0, ATA_DMA2_STROBE, ATA_DMA2_HOLD);
 	cris_ide_set_speed(TYPE_UDMA, ATA_UDMA2_CYC, ATA_UDMA2_DVS, 0);
 
-	ide_device_add(idx);
+	ide_device_add(idx, &cris_port_info);
 
 	return 0;
 }
@@ -1032,11 +1034,7 @@ static int cris_dma_setup(ide_drive_t *drive)
 
 static void cris_dma_exec_cmd(ide_drive_t *drive, u8 command)
 {
-	/* set the irq handler which will finish the request when DMA is done */
-	ide_set_handler(drive, &cris_dma_intr, WAIT_CMD, NULL);
-
-	/* issue cmd to drive */
-	cris_ide_outb(command, IDE_COMMAND_REG);
+	ide_execute_command(drive, command, &cris_dma_intr, WAIT_CMD, NULL);
 }
 
 static void cris_dma_start(ide_drive_t *drive)
diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c
index 02432958dfe..520aec07570 100644
--- a/drivers/ide/h8300/ide-h8300.c
+++ b/drivers/ide/h8300/ide-h8300.c
@@ -114,7 +114,7 @@ static int __init h8300_ide_init(void)
 
 	idx[0] = index;
 
-	ide_device_add(idx);
+	ide_device_add(idx, NULL);
 
 	return 0;
 
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index 68bc6184478..25aaeae1e83 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -39,7 +39,6 @@ struct GTM_buffer {
 };
 
 struct ide_acpi_drive_link {
-	ide_drive_t	*drive;
 	acpi_handle	 obj_handle;
 	u8		 idbuff[512];
 };
@@ -280,16 +279,6 @@ static int do_drive_get_GTF(ide_drive_t *drive,
 
 	port = hwif->channel ? drive->dn - 2: drive->dn;
 
-	if (!drive->acpidata) {
-		if (port == 0) {
-			drive->acpidata = &hwif->acpidata->master;
-			hwif->acpidata->master.drive = drive;
-		} else {
-			drive->acpidata = &hwif->acpidata->slave;
-			hwif->acpidata->slave.drive = drive;
-		}
-	}
-
 	DEBPRINT("ENTER: %s at %s, port#: %d, hard_port#: %d\n",
 		 hwif->name, dev->bus_id, port, hwif->channel);
 
@@ -494,7 +483,6 @@ int ide_acpi_exec_tfs(ide_drive_t *drive)
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(ide_acpi_exec_tfs);
 
 /**
  * ide_acpi_get_timing - get the channel (controller) timings
@@ -580,7 +568,6 @@ void ide_acpi_get_timing(ide_hwif_t *hwif)
 
 	kfree(output.pointer);
 }
-EXPORT_SYMBOL_GPL(ide_acpi_get_timing);
 
 /**
  * ide_acpi_push_timing - set the channel (controller) timings
@@ -634,7 +621,6 @@ void ide_acpi_push_timing(ide_hwif_t *hwif)
 	}
 	DEBPRINT("_STM status: %d\n", status);
 }
-EXPORT_SYMBOL_GPL(ide_acpi_push_timing);
 
 /**
  * ide_acpi_set_state - set the channel power state
@@ -688,11 +674,6 @@ void ide_acpi_set_state(ide_hwif_t *hwif, int on)
  */
 void ide_acpi_init(ide_hwif_t *hwif)
 {
-	int unit;
-	int			err;
-	struct ide_acpi_drive_link	*master;
-	struct ide_acpi_drive_link	*slave;
-
 	ide_acpi_blacklist();
 
 	hwif->acpidata = kzalloc(sizeof(struct ide_acpi_hwif_link), GFP_KERNEL);
@@ -704,40 +685,38 @@ void ide_acpi_init(ide_hwif_t *hwif)
 		DEBPRINT("no ACPI object for %s found\n", hwif->name);
 		kfree(hwif->acpidata);
 		hwif->acpidata = NULL;
-		return;
 	}
+}
+
+void ide_acpi_port_init_devices(ide_hwif_t *hwif)
+{
+	ide_drive_t *drive;
+	int i, err;
+
+	if (hwif->acpidata == NULL)
+		return;
 
 	/*
 	 * The ACPI spec mandates that we send information
 	 * for both drives, regardless whether they are connected
 	 * or not.
 	 */
-	hwif->acpidata->master.drive = &hwif->drives[0];
 	hwif->drives[0].acpidata = &hwif->acpidata->master;
-	master = &hwif->acpidata->master;
-
-	hwif->acpidata->slave.drive = &hwif->drives[1];
 	hwif->drives[1].acpidata = &hwif->acpidata->slave;
-	slave = &hwif->acpidata->slave;
-
 
 	/*
 	 * Send IDENTIFY for each drive
 	 */
-	if (master->drive->present) {
-		err = taskfile_lib_get_identify(master->drive, master->idbuff);
-		if (err) {
-			DEBPRINT("identify device %s failed (%d)\n",
-				 master->drive->name, err);
-		}
-	}
+	for (i = 0; i < MAX_DRIVES; i++) {
+		drive = &hwif->drives[i];
+
+		if (!drive->present)
+			continue;
 
-	if (slave->drive->present) {
-		err = taskfile_lib_get_identify(slave->drive, slave->idbuff);
-		if (err) {
+		err = taskfile_lib_get_identify(drive, drive->acpidata->idbuff);
+		if (err)
 			DEBPRINT("identify device %s failed (%d)\n",
-				 slave->drive->name, err);
-		}
+				 drive->name, err);
 	}
 
 	if (ide_noacpionboot) {
@@ -753,13 +732,11 @@ void ide_acpi_init(ide_hwif_t *hwif)
 	ide_acpi_get_timing(hwif);
 	ide_acpi_push_timing(hwif);
 
-	for (unit = 0; unit < MAX_DRIVES; ++unit) {
-		ide_drive_t *drive = &hwif->drives[unit];
+	for (i = 0; i < MAX_DRIVES; i++) {
+		drive = &hwif->drives[i];
 
-		if (drive->present) {
+		if (drive->present)
 			/* Execute ACPI startup code */
 			ide_acpi_exec_tfs(drive);
-		}
 	}
 }
-EXPORT_SYMBOL_GPL(ide_acpi_init);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 23074e84472..ee4d458e2bb 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -604,8 +604,6 @@ static ide_startstop_t cdrom_transfer_packet_command (ide_drive_t *drive,
  * Block read functions.
  */
 
-typedef void (xfer_func_t)(ide_drive_t *, void *, u32);
-
 static void ide_cd_pad_transfer(ide_drive_t *drive, xfer_func_t *xf, int len)
 {
 	while (len > 0) {
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 7beaf1e9be1..3cf59f2c392 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -819,6 +819,26 @@ int ide_set_dma(ide_drive_t *drive)
 	return 0;
 }
 
+void ide_check_dma_crc(ide_drive_t *drive)
+{
+	u8 mode;
+
+	ide_dma_off_quietly(drive);
+	drive->crc_count = 0;
+	mode = drive->current_speed;
+	/*
+	 * Don't try non Ultra-DMA modes without iCRC's.  Force the
+	 * device to PIO and make the user enable SWDMA/MWDMA modes.
+	 */
+	if (mode > XFER_UDMA_0 && mode <= XFER_UDMA_7)
+		mode--;
+	else
+		mode = XFER_PIO_4;
+	ide_set_xfer_rate(drive, mode);
+	if (drive->current_speed >= XFER_SW_DMA_0)
+		ide_dma_on(drive);
+}
+
 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
 void ide_dma_lost_irq (ide_drive_t *drive)
 {
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 3512637ae8d..f8fe6ee128f 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -4,11 +4,6 @@
  * Copyright (C) 1996-1999  Gadi Oxman <gadio@netvision.net.il>
  * Copyright (C) 2000-2002  Paul Bristow <paul@paulbristow.net>
  * Copyright (C) 2005       Bartlomiej Zolnierkiewicz
- */
-
-/*
- * The driver currently doesn't have any fancy features, just the bare
- * minimum read/write support.
  *
  * This driver supports the following IDE floppy drives:
  *
@@ -20,7 +15,7 @@
  * Documentation/ide/ChangeLog.ide-floppy.1996-2002
  */
 
-#define IDEFLOPPY_VERSION "0.99.newide"
+#define IDEFLOPPY_VERSION "1.00"
 
 #include <linux/module.h>
 #include <linux/types.h>
@@ -42,179 +37,91 @@
 #include <scsi/scsi_ioctl.h>
 
 #include <asm/byteorder.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/irq.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 #include <asm/unaligned.h>
 
-/*
- *	The following are used to debug the driver.
- */
+/* define to see debug info */
 #define IDEFLOPPY_DEBUG_LOG		0
-#define IDEFLOPPY_DEBUG_INFO		0
-#define IDEFLOPPY_DEBUG_BUGS		1
 
 /* #define IDEFLOPPY_DEBUG(fmt, args...) printk(KERN_INFO fmt, ## args) */
-#define IDEFLOPPY_DEBUG( fmt, args... )
+#define IDEFLOPPY_DEBUG(fmt, args...)
 
 #if IDEFLOPPY_DEBUG_LOG
-#define debug_log printk
+#define debug_log(fmt, args...) \
+	printk(KERN_INFO "ide-floppy: " fmt, ## args)
 #else
-#define debug_log(fmt, args... ) do {} while(0)
+#define debug_log(fmt, args...) do {} while (0)
 #endif
 
 
-/*
- *	Some drives require a longer irq timeout.
- */
+/* Some drives require a longer irq timeout. */
 #define IDEFLOPPY_WAIT_CMD		(5 * WAIT_CMD)
 
 /*
- *	After each failed packet command we issue a request sense command
- *	and retry the packet command IDEFLOPPY_MAX_PC_RETRIES times.
+ * After each failed packet command we issue a request sense command and retry
+ * the packet command IDEFLOPPY_MAX_PC_RETRIES times.
  */
 #define IDEFLOPPY_MAX_PC_RETRIES	3
 
 /*
- *	With each packet command, we allocate a buffer of
- *	IDEFLOPPY_PC_BUFFER_SIZE bytes.
+ * With each packet command, we allocate a buffer of IDEFLOPPY_PC_BUFFER_S