Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (132 commits)
  sh: oprofile: Fix up the module build.
  sh: add UIO support for JPU on SH7722.
  serial: sh-sci: Fix up port pinmux for SH7366.
  sh: mach-rsk: Use uImage generation by default for rsk7201/7203.
  sh: mach-sh03: Fix up pata_platform build breakage.
  sh: enable deferred io LCDC on Migo-R
  video: sh_mobile_lcdcfb deferred io support
  video: deferred io with physically contiguous memory
  video: deferred io cleanup
  video: fix deferred io fsync()
  sh: add LCDC interrupt configuration to AP325 and Migo-R
  sh_mobile_lcdc: use FB_SYS helpers instead of FB_CFB
  sh: split coherent pages
  sh: dma: Kill off ISA DMA wrapper.
  sh: Conditionalize the code dumper on CONFIG_DUMP_CODE.
  sh: Kill off the unused SH_ALPHANUMERIC debug option.
  sh: Enable skipping of bss on debug platforms for sh32 also.
  doc: Update sh cpufreq documentation.
  sh: mrshpc_setup_windows() needs to be inline.
  serial: sh-sci: sci_poll_get_char() is only used by CONFIG_CONSOLE_POLL.
  ...

14 files changed, 583 insertions, 595 deletions

diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 3384a717fec..6c3d60b939b 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -160,9 +160,39 @@ struct sh_mobile_i2c_data {
 
 static void activate_ch(struct sh_mobile_i2c_data *pd)
 {
+	unsigned long i2c_clk;
+	u_int32_t num;
+	u_int32_t denom;
+	u_int32_t tmp;
+
 	/* Make sure the clock is enabled */
 	clk_enable(pd->clk);
 
+	/* Get clock rate after clock is enabled */
+	i2c_clk = clk_get_rate(pd->clk);
+
+	/* Calculate the value for iccl. From the data sheet:
+	 * iccl = (p clock / transfer rate) * (L / (L + H))
+	 * where L and H are the SCL low/high ratio (5/4 in this case).
+	 * We also round off the result.
+	 */
+	num = i2c_clk * 5;
+	denom = NORMAL_SPEED * 9;
+	tmp = num * 10 / denom;
+	if (tmp % 10 >= 5)
+		pd->iccl = (u_int8_t)((num/denom) + 1);
+	else
+		pd->iccl = (u_int8_t)(num/denom);
+
+	/* Calculate the value for icch. From the data sheet:
+	   icch = (p clock / transfer rate) * (H / (L + H)) */
+	num = i2c_clk * 4;
+	tmp = num * 10 / denom;
+	if (tmp % 10 >= 5)
+		pd->icch = (u_int8_t)((num/denom) + 1);
+	else
+		pd->icch = (u_int8_t)(num/denom);
+
 	/* Enable channel and configure rx ack */
 	iowrite8(ioread8(ICCR(pd)) | ICCR_ICE, ICCR(pd));
 
@@ -459,40 +489,6 @@ static struct i2c_algorithm sh_mobile_i2c_algorithm = {
 	.master_xfer	= sh_mobile_i2c_xfer,
 };
 
-static void sh_mobile_i2c_setup_channel(struct platform_device *dev)
-{
-	struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev);
-	unsigned long peripheral_clk = clk_get_rate(pd->clk);
-	u_int32_t num;
-	u_int32_t denom;
-	u_int32_t tmp;
-
-	spin_lock_init(&pd->lock);
-	init_waitqueue_head(&pd->wait);
-
-	/* Calculate the value for iccl. From the data sheet:
-	 * iccl = (p clock / transfer rate) * (L / (L + H))
-	 * where L and H are the SCL low/high ratio (5/4 in this case).
-	 * We also round off the result.
-	 */
-	num = peripheral_clk * 5;
-	denom = NORMAL_SPEED * 9;
-	tmp = num * 10 / denom;
-	if (tmp % 10 >= 5)
-		pd->iccl = (u_int8_t)((num/denom) + 1);
-	else
-		pd->iccl = (u_int8_t)(num/denom);
-
-	/* Calculate the value for icch. From the data sheet:
-	   icch = (p clock / transfer rate) * (H / (L + H)) */
-	num = peripheral_clk * 4;
-	tmp = num * 10 / denom;
-	if (tmp % 10 >= 5)
-		pd->icch = (u_int8_t)((num/denom) + 1);
-	else
-		pd->icch = (u_int8_t)(num/denom);
-}
-
 static int sh_mobile_i2c_hook_irqs(struct platform_device *dev, int hook)
 {
 	struct resource *res;
@@ -533,6 +529,7 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
 	struct sh_mobile_i2c_data *pd;
 	struct i2c_adapter *adap;
 	struct resource *res;
+	char clk_name[8];
 	int size;
 	int ret;
 
@@ -542,9 +539,10 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
 		return -ENOMEM;
 	}
 
-	pd->clk = clk_get(&dev->dev, "peripheral_clk");
+	snprintf(clk_name, sizeof(clk_name), "i2c%d", dev->id);
+	pd->clk = clk_get(&dev->dev, clk_name);
 	if (IS_ERR(pd->clk)) {
-		dev_err(&dev->dev, "cannot get peripheral clock\n");
+		dev_err(&dev->dev, "cannot get clock \"%s\"\n", clk_name);
 		ret = PTR_ERR(pd->clk);
 		goto err;
 	}
@@ -586,7 +584,8 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
 
 	strlcpy(adap->name, dev->name, sizeof(adap->name));
 
-	sh_mobile_i2c_setup_channel(dev);
+	spin_lock_init(&pd->lock);
+	init_waitqueue_head(&pd->wait);
 
 	ret = i2c_add_numbered_adapter(adap);
 	if (ret < 0) {
diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c
index c600ab7f93e..5c8a1bcf7ca 100644
--- a/drivers/input/keyboard/sh_keysc.c
+++ b/drivers/input/keyboard/sh_keysc.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
+#include <linux/clk.h>
 #include <linux/io.h>
 #include <asm/sh_keysc.h>
 
@@ -39,6 +40,7 @@ static const struct {
 
 struct sh_keysc_priv {
 	void __iomem *iomem_base;
+	struct clk *clk;
 	unsigned long last_keys;
 	struct input_dev *input;
 	struct sh_keysc_info pdata;
@@ -125,6 +127,7 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev)
 	struct sh_keysc_info *pdata;
 	struct resource *res;
 	struct input_dev *input;
+	char clk_name[8];
 	int i, k;
 	int irq, error;
 
@@ -165,11 +168,19 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev)
 		goto err1;
 	}
 
+	snprintf(clk_name, sizeof(clk_name), "keysc%d", pdev->id);
+	priv->clk = clk_get(&pdev->dev, clk_name);
+	if (IS_ERR(priv->clk)) {
+		dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
+		error = PTR_ERR(priv->clk);
+		goto err2;
+	}
+
 	priv->input = input_allocate_device();
 	if (!priv->input) {
 		dev_err(&pdev->dev, "failed to allocate input device\n");
 		error = -ENOMEM;
-		goto err2;
+		goto err3;
 	}
 
 	input = priv->input;
@@ -187,7 +198,7 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev)
 	error = request_irq(irq, sh_keysc_isr, 0, pdev->name, pdev);
 	if (error) {
 		dev_err(&pdev->dev, "failed to request IRQ\n");
-		goto err3;
+		goto err4;
 	}
 
 	for (i = 0; i < SH_KEYSC_MAXKEYS; i++) {
@@ -199,18 +210,22 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev)
 	error = input_register_device(input);
 	if (error) {
 		dev_err(&pdev->dev, "failed to register input device\n");
-		goto err4;
+		goto err5;
 	}
 
+	clk_enable(priv->clk);
+
 	iowrite16((sh_keysc_mode[pdata->mode].kymd << 8) |
 		  pdata->scan_timing, priv->iomem_base + KYCR1_OFFS);
 	iowrite16(0, priv->iomem_base + KYOUTDR_OFFS);
 	iowrite16(KYCR2_IRQ_LEVEL, priv->iomem_base + KYCR2_OFFS);
 	return 0;
- err4:
+ err5:
 	free_irq(irq, pdev);
- err3:
+ err4:
 	input_free_device(input);
+ err3:
+	clk_put(priv->clk);
  err2:
 	iounmap(priv->iomem_base);
  err1:
@@ -230,6 +245,9 @@ static int __devexit sh_keysc_remove(struct platform_device *pdev)
 	free_irq(platform_get_irq(pdev, 0), pdev);
 	iounmap(priv->iomem_base);
 
+	clk_disable(priv->clk);
+	clk_put(priv->clk);
+
 	platform_set_drvdata(pdev, NULL);
 	kfree(priv);
 	return 0;
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 47102c2c825..057fd7e160c 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -759,7 +759,7 @@ config VIDEO_PXA27x
 
 config VIDEO_SH_MOBILE_CEU
 	tristate "SuperH Mobile CEU Interface driver"
-	depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA
+	depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK
 	select VIDEOBUF_DMA_CONTIG
 	---help---
 	  This is a v4l2 driver for the SuperH Mobile CEU Interface
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 2407607f2ef..536b1a9b310 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -31,6 +31,7 @@
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
 #include <linux/videodev2.h>
+#include <linux/clk.h>
 
 #include <media/v4l2-common.h>
 #include <media/v4l2-dev.h>
@@ -89,6 +90,7 @@ struct sh_mobile_ceu_dev {
 
 	unsigned int irq;
 	void __iomem *base;
+	struct clk *clk;
 	unsigned long video_limit;
 
 	/* lock used to protect videobuf */
@@ -309,6 +311,8 @@ static int sh_mobile_ceu_add_device(struct soc_camera_device *icd)
 	if (ret)
 		goto err;
 
+	clk_enable(pcdev->clk);
+
 	ceu_write(pcdev, CAPSR, 1 << 16); /* reset */
 	while (ceu_read(pcdev, CSTSR) & 1)
 		msleep(1);
@@ -342,6 +346,8 @@ static void sh_mobile_ceu_remove_device(struct soc_camera_device *icd)
 	}
 	spin_unlock_irqrestore(&pcdev->lock, flags);
 
+	clk_disable(pcdev->clk);
+
 	icd->ops->release(icd);
 
 	dev_info(&icd->dev,
@@ -550,6 +556,7 @@ static int sh_mobile_ceu_probe(struct platform_device *pdev)
 	struct sh_mobile_ceu_dev *pcdev;
 	struct resource *res;
 	void __iomem *base;
+	char clk_name[8];
 	unsigned int irq;
 	int err = 0;
 
@@ -615,6 +622,14 @@ static int sh_mobile_ceu_probe(struct platform_device *pdev)
 		goto exit_release_mem;
 	}
 
+	snprintf(clk_name, sizeof(clk_name), "ceu%d", pdev->id);
+	pcdev->clk = clk_get(&pdev->dev, clk_name);
+	if (IS_ERR(pcdev->clk)) {
+		dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
+		err = PTR_ERR(pcdev->clk);
+		goto exit_free_irq;
+	}
+
 	pcdev->ici.priv = pcdev;
 	pcdev->ici.dev.parent = &pdev->dev;
 	pcdev->ici.nr = pdev->id;
@@ -623,10 +638,12 @@ static int sh_mobile_ceu_probe(struct platform_device *pdev)
 
 	err = soc_camera_host_register(&pcdev->ici);
 	if (err)
-		goto exit_free_irq;
+		goto exit_free_clk;
 
 	return 0;
 
+exit_free_clk:
+	clk_put(pcdev->clk);
 exit_free_irq:
 	free_irq(pcdev->irq, pcdev);
 exit_release_mem:
@@ -645,6 +662,7 @@ static int sh_mobile_ceu_remove(struct platform_device *pdev)
 	struct sh_mobile_ceu_dev *pcdev = platform_get_drvdata(pdev);
 
 	soc_camera_host_unregister(&pcdev->ici);
+	clk_put(pcdev->clk);
 	free_irq(pcdev->irq, pcdev);
 	if (platform_get_resource(pdev, IORESOURCE_MEM, 1))
 		dma_release_declared_memory(&pdev->dev);
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 165fc010978..557b54ab2f2 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -51,7 +51,6 @@
 #ifdef CONFIG_SUPERH
 #include <asm/clock.h>
 #include <asm/sh_bios.h>
-#include <asm/kgdb.h>
 #endif
 
 #include "sh-sci.h"
@@ -65,10 +64,6 @@ struct sci_port {
 	/* Port IRQs: ERI, RXI, TXI, BRI (optional) */
 	unsigned int		irqs[SCIx_NR_IRQS];
 
-	/* Port pin configuration */
-	void			(*init_pins)(struct uart_port *port,
-					     unsigned int cflag);
-
 	/* Port enable callback */
 	void			(*enable)(struct uart_port *port);
 
@@ -85,10 +80,6 @@ struct sci_port {
 #endif
 };
 
-#ifdef CONFIG_SH_KGDB
-static struct sci_port *kgdb_sci_port;
-#endif
-
 #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
 static struct sci_port *serial_console_port;
 #endif
@@ -101,21 +92,26 @@ static void sci_stop_tx(struct uart_port *port);
 static struct sci_port sci_ports[SCI_NPORTS];
 static struct uart_driver sci_uart_driver;
 
-#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && \
-    defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
+static inline struct sci_port *
+to_sci_port(struct uart_port *uart)
+{
+	return container_of(uart, struct sci_port, port);
+}
+
+#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
+
+#ifdef CONFIG_CONSOLE_POLL
 static inline void handle_error(struct uart_port *port)
 {
 	/* Clear error flags */
 	sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
 }
 
-static int get_char(struct uart_port *port)
+static int sci_poll_get_char(struct uart_port *port)
 {
-	unsigned long flags;
 	unsigned short status;
 	int c;
 
-	spin_lock_irqsave(&port->lock, flags);
 	do {
 		status = sci_in(port, SCxSR);
 		if (status & SCxSR_ERRORS(port)) {
@@ -123,23 +119,21 @@ static int get_char(struct uart_port *port)
 			continue;
 		}
 	} while (!(status & SCxSR_RDxF(port)));
+
 	c = sci_in(port, SCxRDR);
-	sci_in(port, SCxSR);            /* Dummy read */
+
+	/* Dummy read */
+	sci_in(port, SCxSR);
 	sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
-	spin_unlock_irqrestore(&port->lock, flags);
 
 	return c;
 }
-#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
+#endif
 
-#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) || defined(CONFIG_SH_KGDB)
-static void put_char(struct uart_port *port, char c)
+static void sci_poll_put_char(struct uart_port *port, unsigned char c)
 {
-	unsigned long flags;
 	unsigned short status;
 
-	spin_lock_irqsave(&port->lock, flags);
-
 	do {
 		status = sci_in(port, SCxSR);
 	} while (!(status & SCxSR_TDxE(port)));
@@ -147,96 +141,22 @@ static void put_char(struct uart_port *port, char c)
 	sci_in(port, SCxSR);            /* Dummy read */
 	sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
 	sci_out(port, SCxTDR, c);
-
-	spin_unlock_irqrestore(&port->lock, flags);
 }
-#endif
-
-#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
-static void put_string(struct sci_port *sci_port, const char *buffer, int count)
-{
-	struct uart_port *port = &sci_port->port;
-	const unsigned char *p = buffer;
-	int i;
-
-#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
-	int checksum;
-	int usegdb=0;
-
-#ifdef CONFIG_SH_STANDARD_BIOS
-	/* This call only does a trap the first time it is
-	 * called, and so is safe to do here unconditionally
-	 */
-	usegdb |= sh_bios_in_gdb_mode();
-#endif
-#ifdef CONFIG_SH_KGDB
-	usegdb |= (kgdb_in_gdb_mode && (sci_port == kgdb_sci_port));
-#endif
-
-	if (usegdb) {
-	    /*  $<packet info>#<checksum>. */
-	    do {
-		unsigned char c;
-		put_char(port, '$');
-		put_char(port, 'O'); /* 'O'utput to console */
-		checksum = 'O';
-
-		for (i=0; i<count; i++) { /* Don't use run length encoding */
-			int h, l;
-
-			c = *p++;
-			h = hex_asc_hi(c);
-			l = hex_asc_lo(c);
-			put_char(port, h);
-			put_char(port, l);
-			checksum += h + l;
-		}
-		put_char(port, '#');
-		put_char(port, hex_asc_hi(checksum));
-		put_char(port, hex_asc_lo(checksum));
-	    } while  (get_char(port) != '+');
-	} else
-#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
-	for (i=0; i<count; i++) {
-		if (*p == 10)
-			put_char(port, '\r');
-		put_char(port, *p++);
-	}
-}
-#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
-
-#ifdef CONFIG_SH_KGDB
-static int kgdb_sci_getchar(void)
-{
-        int c;
-
-        /* Keep trying to read a character, this could be neater */
-        while ((c = get_char(&kgdb_sci_port->port)) < 0)
-		cpu_relax();
-
-        return c;
-}
-
-static inline void kgdb_sci_putchar(int c)
-{
-        put_char(&kgdb_sci_port->port, c);
-}
-#endif /* CONFIG_SH_KGDB */
+#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
 
 #if defined(__H8300S__)
 enum { sci_disable, sci_enable };
 
-static void h8300_sci_config(struct uart_port* port, unsigned int ctrl)
+static void h8300_sci_config(struct uart_port *port, unsigned int ctrl)
 {
-	volatile unsigned char *mstpcrl=(volatile unsigned char *)MSTPCRL;
+	volatile unsigned char *mstpcrl = (volatile unsigned char *)MSTPCRL;
 	int ch = (port->mapbase  - SMR0) >> 3;
 	unsigned char mask = 1 << (ch+1);
 
-	if (ctrl == sci_disable) {
+	if (ctrl == sci_disable)
 		*mstpcrl |= mask;
-	} else {
+	else
 		*mstpcrl &= ~mask;
-	}
 }
 
 static inline void h8300_sci_enable(struct uart_port *port)
@@ -251,7 +171,7 @@ static inline void h8300_sci_disable(struct uart_port *port)
 #endif
 
 #if defined(__H8300H__) || defined(__H8300S__)
-static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag)
+static void sci_init_pins(struct uart_port *port, unsigned int cflag)
 {
 	int ch = (port->mapbase - SMR0) >> 3;
 
@@ -266,141 +186,99 @@ static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag)
 	/* tx mark output*/
 	H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx;
 }
-#else
-#define sci_init_pins_sci NULL
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
-static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
 {
-	unsigned int fcr_val = 0;
-
-	if (cflag & CRTSCTS)
-		fcr_val |= SCFCR_MCE;
-
-	sci_out(port, SCFCR, fcr_val);
-}
-#else
-#define sci_init_pins_irda NULL
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
-static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag)
-{
-	unsigned int fcr_val = 0;
-
-	set_sh771x_scif_pfc(port);
-	if (cflag & CRTSCTS) {
-		fcr_val |= SCFCR_MCE;
-	}
-	sci_out(port, SCFCR, fcr_val);
+	if (port->mapbase == 0xA4400000) {
+		__raw_writew(__raw_readw(PACR) & 0xffc0, PACR);
+		__raw_writew(__raw_readw(PBCR) & 0x0fff, PBCR);
+	} else if (port->mapbase == 0xA4410000)
+		__raw_writew(__raw_readw(PBCR) & 0xf003, PBCR);
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7721)
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
 {
-	unsigned int fcr_val = 0;
 	unsigned short data;
 
 	if (cflag & CRTSCTS) {
 		/* enable RTS/CTS */
 		if (port->mapbase == 0xa4430000) { /* SCIF0 */
 			/* Clear PTCR bit 9-2; enable all scif pins but sck */
-			data = ctrl_inw(PORT_PTCR);
-			ctrl_outw((data & 0xfc03), PORT_PTCR);
+			data = __raw_readw(PORT_PTCR);
+			__raw_writew((data & 0xfc03), PORT_PTCR);
 		} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
 			/* Clear PVCR bit 9-2 */
-			data = ctrl_inw(PORT_PVCR);
-			ctrl_outw((data & 0xfc03), PORT_PVCR);
+			data = __raw_readw(PORT_PVCR);
+			__raw_writew((data & 0xfc03), PORT_PVCR);
 		}
-		fcr_val |= SCFCR_MCE;
 	} else {
 		if (port->mapbase == 0xa4430000) { /* SCIF0 */
 			/* Clear PTCR bit 5-2; enable only tx and rx  */
-			data = ctrl_inw(PORT_PTCR);
-			ctrl_outw((data & 0xffc3), PORT_PTCR);
+			data = __raw_readw(PORT_PTCR);
+			__raw_writew((data & 0xffc3), PORT_PTCR);
 		} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
 			/* Clear PVCR bit 5-2 */
-			data = ctrl_inw(PORT_PVCR);
-			ctrl_outw((data & 0xffc3), PORT_PVCR);
+			data = __raw_readw(PORT_PVCR);
+			__raw_writew((data & 0xffc3), PORT_PVCR);
 		}
 	}
-	sci_out(port, SCFCR, fcr_val);
 }
 #elif defined(CONFIG_CPU_SH3)
 /* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
 {
-	unsigned int fcr_val = 0;
 	unsigned short data;
 
 	/* We need to set SCPCR to enable RTS/CTS */
-	data = ctrl_inw(SCPCR);
+	data = __raw_readw(SCPCR);
 	/* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
-	ctrl_outw(data & 0x0fcf, SCPCR);
+	__raw_writew(data & 0x0fcf, SCPCR);
 
-	if (cflag & CRTSCTS)
-		fcr_val |= SCFCR_MCE;
-	else {
+	if (!(cflag & CRTSCTS)) {
 		/* We need to set SCPCR to enable RTS/CTS */
-		data = ctrl_inw(SCPCR);
+		data = __raw_readw(SCPCR);
 		/* Clear out SCP7MD1,0, SCP4MD1,0,
 		   Set SCP6MD1,0 = {01} (output)  */
-		ctrl_outw((data & 0x0fcf) | 0x1000, SCPCR);
+		__raw_writew((data & 0x0fcf) | 0x1000, SCPCR);
 
 		data = ctrl_inb(SCPDR);
 		/* Set /RTS2 (bit6) = 0 */
 		ctrl_outb(data & 0xbf, SCPDR);
 	}
-
-	sci_out(port, SCFCR, fcr_val);
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7722)
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
 {
-	unsigned int fcr_val = 0;
 	unsigned short data;
 
 	if (port->mapbase == 0xffe00000) {
-		data = ctrl_inw(PSCR);
+		data = __raw_readw(PSCR);
 		data &= ~0x03cf;
-		if (cflag & CRTSCTS)
-			fcr_val |= SCFCR_MCE;
-		else
+		if (!(cflag & CRTSCTS))
 			data |= 0x0340;
 
-		ctrl_outw(data, PSCR);
+		__raw_writew(data, PSCR);
 	}
-	/* SCIF1 and SCIF2 should be setup by board code */
-
-	sci_out(port, SCFCR, fcr_val);
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
-{
-	/* Nothing to do here.. */
-	sci_out(port, SCFCR, 0);
 }
-#else
-/* For SH7750 */
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
-{
-	unsigned int fcr_val = 0;
-
-	if (cflag & CRTSCTS) {
-		fcr_val |= SCFCR_MCE;
-	} else {
-#if defined(CONFIG_CPU_SUBTYPE_SH7343) || defined(CONFIG_CPU_SUBTYPE_SH7366)
-		/* Nothing */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
       defined(CONFIG_CPU_SUBTYPE_SH7780) || \
       defined(CONFIG_CPU_SUBTYPE_SH7785) || \
       defined(CONFIG_CPU_SUBTYPE_SHX3)
-		ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+	if (!(cflag & CRTSCTS))
+		__raw_writew(0x0080, SCSPTR0); /* Set RTS = 1 */
+}
+#elif defined(CONFIG_CPU_SH4) && !defined(CONFIG_CPU_SH4A)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+	if (!(cflag & CRTSCTS))
+		__raw_writew(0x0080, SCSPTR2); /* Set RTS = 1 */
+}
 #else
-		ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */
-#endif
-	}
-	sci_out(port, SCFCR, fcr_val);
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+	/* Nothing to do */
 }
 #endif
 
@@ -419,18 +297,26 @@ static inline int scif_rxroom(struct uart_port *port)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763)
 static inline int scif_txroom(struct uart_port *port)
 {
-	if((port->mapbase == 0xffe00000) || (port->mapbase == 0xffe08000)) /* SCIF0/1*/
+	if ((port->mapbase == 0xffe00000) ||
+	    (port->mapbase == 0xffe08000)) {
+		/* SCIF0/1*/
 		return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0xff);
-	else /* SCIF2 */
+	} else {
+		/* SCIF2 */
 		return SCIF2_TXROOM_MAX - (sci_in(port, SCFDR) >> 8);
+	}
 }
 
 static inline int scif_rxroom(struct uart_port *port)
 {
-	if((port->mapbase == 0xffe00000) || (port->mapbase == 0xffe08000)) /* SCIF0/1*/
+	if ((port->mapbase == 0xffe00000) ||
+	    (port->mapbase == 0xffe08000)) {
+		/* SCIF0/1*/
 		return sci_in(port, SCRFDR) & 0xff;
-	else /* SCIF2 */
+	} else {
+		/* SCIF2 */
 		return sci_in(port, SCFDR) & SCIF2_RFDC_MASK;
+	}
 }
 #else
 static inline int scif_txroom(struct uart_port *port)
@@ -446,12 +332,12 @@ static inline int scif_rxroom(struct uart_port *port)
 
 static inline int sci_txroom(struct uart_port *port)
 {
-	return ((sci_in(port, SCxSR) & SCI_TDRE) != 0);
+	return (sci_in(port, SCxSR) & SCI_TDRE) != 0;
 }
 
 static inline int sci_rxroom(struct uart_port *port)
 {
-	return ((sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0);
+	return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0;
 }
 
 /* ********************************************************************** *
@@ -469,11 +355,10 @@ static void sci_transmit_chars(struct uart_port *port)
 	status = sci_in(port, SCxSR);
 	if (!(status & SCxSR_TDxE(port))) {
 		ctrl = sci_in(port, SCSCR);
-		if (uart_circ_empty(xmit)) {
+		if (uart_circ_empty(xmit))
 			ctrl &= ~SCI_CTRL_FLAGS_TIE;
-		} else {
+		else
 			ctrl |= SCI_CTRL_FLAGS_TIE;
-		}
 		sci_out(port, SCSCR, ctrl);
 		return;
 	}
@@ -521,11 +406,11 @@ static void sci_transmit_chars(struct uart_port *port)
 }
 
 /* On SH3, SCIF may read end-of-break as a space->mark char */
-#define STEPFN(c)  ({int __c=(c); (((__c-1)|(__c)) == -1); })
+#define STEPFN(c)  ({int __c = (c); (((__c-1)|(__c)) == -1); })
 
 static inline void sci_receive_chars(struct uart_port *port)
 {
-	struct sci_port *sci_port = (struct sci_port *)port;
+	struct sci_port *sci_port = to_sci_port(port);
 	struct tty_struct *tty = port->info->port.tty;
 	int i, count, copied = 0;
 	unsigned short status;
@@ -550,13 +435,13 @@ static inline void sci_receive_chars(struct uart_port *port)
 
 		if (port->type == PORT_SCI) {
 			char c = sci_in(port, SCxRDR);
-			if (uart_handle_sysrq_char(port, c) || sci_port->break_flag)
+			if (uart_handle_sysrq_char(port, c) ||
+			    sci_port->break_flag)
 				count = 0;
-			else {
+			else
 				tty_insert_flip_char(tty, c, TTY_NORMAL);
-			}
 		} else {
-			for (i=0; i<count; i++) {
+			for (i = 0; i < count; i++) {
 				char c = sci_in(port, SCxRDR);
 				status = sci_in(port, SCxSR);
 #if defined(CONFIG_CPU_SH3)
@@ -569,7 +454,7 @@ static inline void sci_receive_chars(struct uart_port *port)
 					}
 
 					/* Nonzero => end-of-break */
-					pr_debug("scif: debounce<%02x>\n", c);
+					dev_dbg(port->dev, "debounce<%02x>\n", c);
 					sci_port->break_flag = 0;
 
 					if (STEPFN(c)) {
@@ -586,12 +471,13 @@ static inline void sci_receive_chars(struct uart_port *port)
 				/* Store data and status */
 				if (status&SCxSR_FER(port)) {
 					flag = TTY_FRAME;
-					pr_debug("sci: frame error\n");
+					dev_notice(port->dev, "frame error\n");
 				} else if (status&SCxSR_PER(port)) {
 					flag = TTY_PARITY;
-					pr_debug("sci: parity error\n");
+					dev_notice(port->dev, "parity error\n");
 				} else
 					flag = TTY_NORMAL;
+
 				tty_insert_flip_char(tty, c, flag);
 			}
 		}
@@ -651,13 +537,14 @@ static inline int sci_handle_errors(struct uart_port *port)
 		/* overrun error */
 		if (tty_insert_flip_char(tty, 0, TTY_OVERRUN))
 			copied++;
-		pr_debug("sci: overrun error\n");
+
+		dev_notice(port->dev, "overrun error");
 	}
 
 	if (status & SCxSR_FER(port)) {
 		if (sci_rxd_in(port) == 0) {
 			/* Notify of BREAK */
-			struct sci_port *sci_port = (struct sci_port *)port;
+			struct sci_port *sci_port = to_sci_port(port);
 
 			if (!sci_port->break_flag) {
 				sci_port->break_flag = 1;
@@ -666,15 +553,19 @@ static inline int sci_handle_errors(struct uart_port *port)
 				/* Do sysrq handling. */
 				if (uart_handle_break(port))
 					return 0;
-			        pr_debug("sci: BREAK detected\n");
+
+				dev_dbg(port->dev, "BREAK detected\n");
+
 				if (tty_insert_flip_char(tty, 0, TTY_BREAK))
-				        copied++;
-                       }
+					copied++;
+			}
+
 		} else {
 			/* frame error */
 			if (tty_insert_flip_char(tty, 0, TTY_FRAME))
 				copied++;
-			pr_debug("sci: frame error\n");
+
+			dev_notice(port->dev, "frame error\n");
 		}
 	}
 
@@ -682,7 +573,8 @@ static inline int sci_handle_errors(struct uart_port *port)
 		/* parity error */
 		if (tty_insert_flip_char(tty, 0, TTY_PARITY))
 			copied++;
-		pr_debug("sci: parity error\n");
+
+		dev_notice(port->dev, "parity error");
 	}
 
 	if (copied)
@@ -691,6 +583,27 @@ static inline int sci_handle_errors(struct uart_port *port)
 	return copied;
 }
 
+static inline int sci_handle_fifo_overrun(struct uart_port *port)
+{
+	struct tty_struct *tty = port->info->port.tty;
+	int copied = 0;
+
+	if (port->type != PORT_SCIF)
+		return 0;
+
+	if ((sci_in(port, SCLSR) & SCIF_ORER) != 0) {
+		sci_out(port, SCLSR, 0);
+
+		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+		tty_flip_buffer_push(tty);
+
+		dev_notice(port->dev, "overrun error\n");
+		copied++;
+	}
+
+	return copied;
+}
+
 static inline int sci_handle_breaks(struct uart_port *port)
 {
 	int copied = 0;
@@ -709,23 +622,15 @@ static inline int sci_handle_breaks(struct uart_port *port)
 		/* Notify of BREAK */
 		if (tty_insert_flip_char(tty, 0, TTY_BREAK))
 			copied++;
-		pr_debug("sci: BREAK detected\n");
-	}
 
-#if defined(SCIF_ORER)
-	/* XXX: Handle SCIF overrun error */
-	if (port->type != PORT_SCI && (sci_in(port, SCLSR) & SCIF_ORER) != 0) {
-		sci_out(port, SCLSR, 0);
-		if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) {
-			copied++;
-			pr_debug("sci: overrun error\n");
-		}
+		dev_dbg(port->dev, "BREAK detected\n");
 	}
-#endif
 
 	if (copied)
 		tty_flip_buffer_push(tty);
 
+	copied += sci_handle_fifo_overrun(port);
+
 	return copied;
 }
 
@@ -763,16 +668,7 @@ static irqreturn_t sci_er_interrupt(int irq, void *ptr)
 			sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
 		}
 	} else {
-#if defined(SCIF_ORER)
-		if((sci_in(port, SCLSR) & SCIF_ORER) != 0) {
-			struct tty_struct *tty = port->info->port.tty;
-
-			sci_out(port, SCLSR, 0);
-			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-			tty_flip_buffer_push(tty);
-			pr_debug("scif: overrun error\n");
-		}
-#endif
+		sci_handle_fifo_overrun(port);
 		sci_rx_interrupt(irq, ptr);
 	}
 
@@ -801,8 +697,8 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 	struct uart_port *port = ptr;
 	irqreturn_t ret = IRQ_NONE;
 
-        ssr_status = sci_in(port,SCxSR);
-        scr_status = sci_in(port,SCSCR);
+	ssr_status = sci_in(port, SCxSR);
+	scr_status = sci_in(port, SCSCR);
 
 	/* Tx Interrupt */
 	if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE))
@@ -820,7 +716,7 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 	return ret;
 }
 
-#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
 /*
  * Here we define a transistion notifier so that we can update all of our
  * ports' baud rate when the peripheral clock changes.
@@ -828,41 +724,20 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 static int sci_notifier(struct notifier_block *self,
 			unsigned long phase, void *p)
 {
-	struct cpufreq_freqs *freqs = p;
 	int i;
 
 	if ((phase == CPUFREQ_POSTCHANGE) ||
-	    (phase == CPUFREQ_RESUMECHANGE)){
+	    (phase == CPUFREQ_RESUMECHANGE))
 		for (i = 0; i < SCI_NPORTS; i++) {
-			struct uart_port *port = &sci_ports[i].port;
-			struct clk *clk;
-
-			/*
-			 * Update the uartclk per-port if frequency has
-			 * changed, since it will no longer necessarily be
-			 * consistent with the old frequency.
-			 *
-			 * Really we want to be able to do something like
-			 * uart_change_speed() or something along those lines
-			 * here to implicitly reset the per-port baud rate..
-			 *
-			 * Clean this up later..
-			 */
-			clk = clk_get(NULL, "module_clk");
-			port->uartclk = clk_get_rate(clk);
-			clk_put(clk);
+			struct sci_port *s = &sci_ports[i];
+			s->port.uartclk = clk_get_rate(s->clk);
 		}