Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:

 o Add basic support for the Mediatek/Ralink Wireless SoC family.

 o The Qualcomm Atheros platform is extended by support for the new
   QCA955X SoC series as well as a bunch of patches that get the code
   ready for OF support.

 o Lantiq and BCM47XX platform have a few improvements and bug fixes.

 o MIPS has sent a few patches that get the kernel ready for the
   upcoming microMIPS support.

 o The rest of the series is made up of small bug fixes and cleanups
   that relate to various parts of the MIPS code.  The biggy in there is
   a whitespace cleanup.  After I was sent another set of whitespace
   cleanup patches I decided it was the time to clean the whitespace
   "issues" for once and and that touches many files below arch/mips/.

Fix up silly conflicts, mostly due to whitespace cleanups.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (105 commits)
  MIPS: Quit exporting kernel internel break codes to uapi/asm/break.h
  MIPS: remove broken conditional inside vpe loader code
  MIPS: SMTC: fix implicit declaration of set_vi_handler
  MIPS: early_printk: drop __init annotations
  MIPS: Probe for and report hardware virtualization support.
  MIPS: ath79: add support for the Qualcomm Atheros AP136-010 board
  MIPS: ath79: add USB controller registration code for the QCA955X SoCs
  MIPS: ath79: add PCI controller registration code for the QCA955X SoCs
  MIPS: ath79: add WMAC registration code for the QCA955X SoCs
  MIPS: ath79: register UART for the QCA955X SoCs
  MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set, clear}
  MIPS: ath79: add GPIO setup code for the QCA955X SoCs
  MIPS: ath79: add IRQ handling code for the QCA955X SoCs
  MIPS: ath79: add clock setup code for the QCA955X SoCs
  MIPS: ath79: add SoC detection code for the QCA955X SoCs
  MIPS: ath79: add early printk support for the QCA955X SoCs
  MIPS: ath79: fix WMAC IRQ resource assignment
  mips: reserve elfcorehdr
  mips: Make sure kernel memory is in iomem
  MIPS: ath79: use dynamically allocated USB platform devices
  ...

5 files changed, 13 insertions, 13 deletions

diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c
index e06d782489a..6a1180502cc 100644
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -14,7 +14,7 @@
 #include <linux/slab.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <asm/mach-bcm47xx/nvram.h>
+#include <bcm47xx_nvram.h>
 
 /* 10 parts were found on sflash on Netgear WNDR4500 */
 #define BCM47XXPART_MAX_PARTS		12
diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c
index a7efec29303..9b017d9c58e 100644
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -381,7 +381,7 @@ static void b44_set_flow_ctrl(struct b44 *bp, u32 local, u32 remote)
 }
 
 #ifdef CONFIG_BCM47XX
-#include <asm/mach-bcm47xx/nvram.h>
+#include <bcm47xx_nvram.h>
 static void b44_wap54g10_workaround(struct b44 *bp)
 {
 	char buf[20];
@@ -393,7 +393,7 @@ static void b44_wap54g10_workaround(struct b44 *bp)
 	 * see https://dev.openwrt.org/ticket/146
 	 * check and reset bit "isolate"
 	 */
-	if (nvram_getenv("boardnum", buf, sizeof(buf)) < 0)
+	if (bcm47xx_nvram_getenv("boardnum", buf, sizeof(buf)) < 0)
 		return;
 	if (simple_strtoul(buf, NULL, 0) == 2) {
 		err = __b44_readphy(bp, 0, MII_BMCR, &val);
diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c
index bf985c04524..639049d7e92 100644
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -15,7 +15,7 @@
 #include <linux/mii.h>
 #include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
-#include <asm/mach-bcm47xx/nvram.h>
+#include <bcm47xx_nvram.h>
 
 static const struct bcma_device_id bgmac_bcma_tbl[] = {
 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS),
@@ -908,7 +908,7 @@ static void bgmac_chip_reset(struct bgmac *bgmac)
 			     BGMAC_CHIPCTL_1_IF_TYPE_RMII;
 		char buf[2];
 
-		if (nvram_getenv("et_swtype", buf, 1) > 0) {
+		if (bcm47xx_nvram_getenv("et_swtype", buf, 1) > 0) {
 			if (kstrtou8(buf, 0, &et_swtype))
 				bgmac_err(bgmac, "Failed to parse et_swtype (%s)\n",
 					  buf);
@@ -1386,7 +1386,7 @@ static int bgmac_probe(struct bcma_device *core)
 	}
 
 	bgmac->int_mask = BGMAC_IS_ERRMASK | BGMAC_IS_RX | BGMAC_IS_TX_MASK;
-	if (nvram_getenv("et0_no_txint", NULL, 0) == 0)
+	if (bcm47xx_nvram_getenv("et0_no_txint", NULL, 0) == 0)
 		bgmac->int_mask &= ~BGMAC_IS_TX_MASK;
 
 	/* TODO: reset the external phy. Specs are needed */
diff --git a/drivers/ssb/driver_chipcommon_pmu.c b/drivers/ssb/driver_chipcommon_pmu.c
index a43415a7fbe..4c0f6d883dd 100644
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -14,7 +14,7 @@
 #include <linux/delay.h>
 #include <linux/export.h>
 #ifdef CONFIG_BCM47XX
-#include <asm/mach-bcm47xx/nvram.h>
+#include <bcm47xx_nvram.h>
 #endif
 
 #include "ssb_private.h"
@@ -322,7 +322,7 @@ static void ssb_pmu_pll_init(struct ssb_chipcommon *cc)
 	if (bus->bustype == SSB_BUSTYPE_SSB) {
 #ifdef CONFIG_BCM47XX
 		char buf[20];
-		if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0)
+		if (bcm47xx_nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0)
 			crystalfreq = simple_strtoul(buf, NULL, 0);
 #endif
 	}
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index a0162cbf055..cf9210db9fa 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -729,19 +729,19 @@ config SERIAL_SH_SCI_DMA
 
 config SERIAL_PNX8XXX
 	bool "Enable PNX8XXX SoCs' UART Support"
-	depends on SOC_PNX8550 || SOC_PNX833X
+	depends on SOC_PNX833X
 	select SERIAL_CORE
 	help
-	  If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
-	  and you want to use serial ports, say Y.  Otherwise, say N.
+	  If you have a MIPS-based Philips SoC such as PNX8330 and you want
+	  to use serial ports, say Y.  Otherwise, say N.
 
 config SERIAL_PNX8XXX_CONSOLE
 	bool "Enable PNX8XX0 serial console"
 	depends on SERIAL_PNX8XXX
 	select SERIAL_CORE_CONSOLE
 	help
-	  If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
-	  and you want to use serial console, say Y. Otherwise, say N.
+	  If you have a MIPS-based Philips SoC such as PNX8330 and you want
+	  to use serial console, say Y. Otherwise, say N.
 
 config SERIAL_HS_LPC32XX
 	tristate "LPC32XX high speed serial port support"