[PATCH] input-driver-yealink-P1K-usb-phone

This patch aggregates all modifications in the -mm tree and adds
complete ringtone support.

The following features are supported:
  - keyboard          full support
  - LCD               full support
  - LED               full support
  - dialtone          full support
  - ringtone          full support
  - audio playback    via generic usb audio diver
  - audio record      via generic usb audio diver

For driver documentation see: Documentation/input/yealink.txt
For vendor documentation see: http://yealink.com

Signed-off-by: Henk <Henk.Vergonet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

5 files changed, 1434 insertions, 0 deletions

diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig
index 298e4a25e3d..482c4be521f 100644
--- a/drivers/usb/input/Kconfig
+++ b/drivers/usb/input/Kconfig
@@ -230,6 +230,20 @@ config USB_EGALAX
 	  To compile this driver as a module, choose M here: the
 	  module will be called touchkitusb.
 
+config USB_YEALINK
+	tristate "Yealink usb-p1k voip phone"
+	depends on USB && INPUT && EXPERIMENTAL
+	---help---
+	  Say Y here if you want to enable keyboard and LCD functions of the
+	  Yealink usb-p1k usb phones. The audio part is enabled by the generic
+	  usb sound driver, so you might want to enable that as well.
+
+	  For information about how to use these additional functions, see
+	  <file:Documentation/input/yealink.txt>.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called yealink.
+
 config USB_XPAD
 	tristate "X-Box gamepad support"
 	depends on USB && INPUT
diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile
index f1547be632d..43b2f999edf 100644
--- a/drivers/usb/input/Makefile
+++ b/drivers/usb/input/Makefile
@@ -39,4 +39,5 @@ obj-$(CONFIG_USB_EGALAX)	+= touchkitusb.o
 obj-$(CONFIG_USB_POWERMATE)	+= powermate.o
 obj-$(CONFIG_USB_WACOM)		+= wacom.o
 obj-$(CONFIG_USB_ACECAD)	+= acecad.o
+obj-$(CONFIG_USB_YEALINK)	+= yealink.o
 obj-$(CONFIG_USB_XPAD)		+= xpad.o
diff --git a/drivers/usb/input/map_to_7segment.h b/drivers/usb/input/map_to_7segment.h
new file mode 100644
index 00000000000..52ff27f1512
--- /dev/null
+++ b/drivers/usb/input/map_to_7segment.h
@@ -0,0 +1,189 @@
+/*
+ * drivers/usb/input/map_to_7segment.h
+ *
+ * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef MAP_TO_7SEGMENT_H
+#define MAP_TO_7SEGMENT_H
+
+/* This file provides translation primitives and tables for the conversion
+ * of (ASCII) characters to a 7-segments notation.
+ *
+ * The 7 segment's wikipedia notation below is used as standard.
+ * See: http://en.wikipedia.org/wiki/Seven_segment_display
+ *
+ * Notation:	+-a-+
+ *		f   b
+ *		+-g-+
+ *		e   c
+ *		+-d-+
+ *
+ * Usage:
+ *
+ *   Register a map variable, and fill it with a character set:
+ * 	static SEG7_DEFAULT_MAP(map_seg7);
+ *
+ *
+ *   Then use for conversion:
+ *	seg7 = map_to_seg7(&map_seg7, some_char);
+ *	...
+ *
+ * In device drivers it is recommended, if required, to make the char map
+ * accessible via the sysfs interface using the following scheme:
+ *
+ * static ssize_t show_map(struct device *dev, char *buf) {
+ *	memcpy(buf, &map_seg7, sizeof(map_seg7));
+ *	return sizeof(map_seg7);
+ * }
+ * static ssize_t store_map(struct device *dev, const char *buf, size_t cnt) {
+ *	if(cnt != sizeof(map_seg7))
+ *		return -EINVAL;
+ *	memcpy(&map_seg7, buf, cnt);
+ *	return cnt;
+ * }
+ * static DEVICE_ATTR(map_seg7, PERMS_RW, show_map, store_map);
+ *
+ * History:
+ * 2005-05-31	RFC linux-kernel@vger.kernel.org
+ */
+#include <linux/errno.h>
+
+
+#define BIT_SEG7_A		0
+#define BIT_SEG7_B		1
+#define BIT_SEG7_C		2
+#define BIT_SEG7_D		3
+#define BIT_SEG7_E		4
+#define BIT_SEG7_F		5
+#define BIT_SEG7_G		6
+#define BIT_SEG7_RESERVED	7
+
+struct seg7_conversion_map {
+	unsigned char	table[128];
+};
+
+static inline int map_to_seg7(struct seg7_conversion_map *map, int c)
+{
+	return c & 0x7f ? map->table[c] : -EINVAL;
+}
+
+#define SEG7_CONVERSION_MAP(_name, _map)	\
+	struct seg7_conversion_map _name = { .table = { _map } }
+
+/*
+ * It is recommended to use a facility that allows user space to redefine
+ * custom character sets for LCD devices. Please use a sysfs interface
+ * as described above.
+ */
+#define MAP_TO_SEG7_SYSFS_FILE	"map_seg7"
+
+/*******************************************************************************
+ * ASCII conversion table
+ ******************************************************************************/
+
+#define _SEG7(l,a,b,c,d,e,f,g)	\
+      (	a<<BIT_SEG7_A |	b<<BIT_SEG7_B |	c<<BIT_SEG7_C |	d<<BIT_SEG7_D |	\
+	e<<BIT_SEG7_E |	f<<BIT_SEG7_F |	g<<BIT_SEG7_G )
+
+#define _MAP_0_32_ASCII_SEG7_NON_PRINTABLE	\
+	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+
+#define _MAP_33_47_ASCII_SEG7_SYMBOL		\
+ _SEG7('!',0,0,0,0,1,1,0), _SEG7('"',0,1,0,0,0,1,0), _SEG7('#',0,1,1,0,1,1,0),\
+ _SEG7('$',1,0,1,1,0,1,1), _SEG7('%',0,0,1,0,0,1,0), _SEG7('&',1,0,1,1,1,1,1),\
+ _SEG7('\'',0,0,0,0,0,1,0),_SEG7('(',1,0,0,1,1,1,0), _SEG7(')',1,1,1,1,0,0,0),\
+ _SEG7('*',0,1,1,0,1,1,1), _SEG7('+',0,1,1,0,0,0,1), _SEG7(',',0,0,0,0,1,0,0),\
+ _SEG7('-',0,0,0,0,0,0,1), _SEG7('.',0,0,0,0,1,0,0), _SEG7('/',0,1,0,0,1,0,1),
+
+#define _MAP_48_57_ASCII_SEG7_NUMERIC		\
+ _SEG7('0',1,1,1,1,1,1,0), _SEG7('1',0,1,1,0,0,0,0), _SEG7('2',1,1,0,1,1,0,1),\
+ _SEG7('3',1,1,1,1,0,0,1), _SEG7('4',0,1,1,0,0,1,1), _SEG7('5',1,0,1,1,0,1,1),\
+ _SEG7('6',1,0,1,1,1,1,1), _SEG7('7',1,1,1,0,0,0,0), _SEG7('8',1,1,1,1,1,1,1),\
+ _SEG7('9',1,1,1,1,0,1,1),
+
+#define _MAP_58_64_ASCII_SEG7_SYMBOL		\
+ _SEG7(':',0,0,0,1,0,0,1), _SEG7(';',0,0,0,1,0,0,1), _SEG7('<',1,0,0,0,0,1,1),\
+ _SEG7('=',0,0,0,1,0,0,1), _SEG7('>',1,1,0,0,0,0,1), _SEG7('?',1,1,1,0,0,1,0),\
+ _SEG7('@',1,1,0,1,1,1,1),
+
+#define _MAP_65_90_ASCII_SEG7_ALPHA_UPPR	\
+ _SEG7('A',1,1,1,0,1,1,1), _SEG7('B',1,1,1,1,1,1,1), _SEG7('C',1,0,0,1,1,1,0),\
+ _SEG7('D',1,1,1,1,1,1,0), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\
+ _SEG7('G',1,1,1,1,0,1,1), _SEG7('H',0,1,1,0,1,1,1), _SEG7('I',0,1,1,0,0,0,0),\
+ _SEG7('J',0,1,1,1,0,0,0), _SEG7('K',0,1,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\
+ _SEG7('M',1,1,1,0,1,1,0), _SEG7('N',1,1,1,0,1,1,0), _SEG7('O',1,1,1,1,1,1,0),\
+ _SEG7('P',1,1,0,0,1,1,1), _SEG7('Q',1,1,1,1,1,1,0), _SEG7('R',1,1,1,0,1,1,1),\
+ _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('U',0,1,1,1,1,1,0),\
+ _SEG7('V',0,1,1,1,1,1,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\
+ _SEG7('Y',0,1,1,0,0,1,1), _SEG7('Z',1,1,0,1,1,0,1),
+
+#define _MAP_91_96_ASCII_SEG7_SYMBOL		\
+ _SEG7('[',1,0,0,1,1,1,0), _SEG7('\\',0,0,1,0,0,1,1),_SEG7(']',1,1,1,1,0,0,0),\
+ _SEG7('^',1,1,0,0,0,1,0), _SEG7('_',0,0,0,1,0,0,0), _SEG7('`',0,1,0,0,0,0,0),
+
+#define _MAP_97_122_ASCII_SEG7_ALPHA_LOWER	\
+ _SEG7('A',1,1,1,0,1,1,1), _SEG7('b',0,0,1,1,1,1,1), _SEG7('c',0,0,0,1,1,0,1),\
+ _SEG7('d',0,1,1,1,1,0,1), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\
+ _SEG7('G',1,1,1,1,0,1,1), _SEG7('h',0,0,1,0,1,1,1), _SEG7('i',0,0,1,0,0,0,0),\
+ _SEG7('j',0,0,1,1,0,0,0), _SEG7('k',0,0,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\
+ _SEG7('M',1,1,1,0,1,1,0), _SEG7('n',0,0,1,0,1,0,1), _SEG7('o',0,0,1,1,1,0,1),\
+ _SEG7('P',1,1,0,0,1,1,1), _SEG7('q',1,1,1,0,0,1,1), _SEG7('r',0,0,0,0,1,0,1),\
+ _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('u',0,0,1,1,1,0,0),\
+ _SEG7('v',0,0,1,1,1,0,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\
+ _SEG7('y',0,1,1,1,0,1,1), _SEG7('Z',1,1,0,1,1,0,1),
+
+#define _MAP_123_126_ASCII_SEG7_SYMBOL		\
+ _SEG7('{',1,0,0,1,1,1,0), _SEG7('|',0,0,0,0,1,1,0), _SEG7('}',1,1,1,1,0,0,0),\
+ _SEG7('~',1,0,0,0,0,0,0),
+
+/* Maps */
+
+/* This set tries to map as close as possible to the visible characteristics
+ * of the ASCII symbol, lowercase and uppercase letters may differ in
+ * presentation on the display.
+ */
+#define MAP_ASCII7SEG_ALPHANUM			\
+	_MAP_0_32_ASCII_SEG7_NON_PRINTABLE	\
+	_MAP_33_47_ASCII_SEG7_SYMBOL		\
+	_MAP_48_57_ASCII_SEG7_NUMERIC		\
+	_MAP_58_64_ASCII_SEG7_SYMBOL		\
+	_MAP_65_90_ASCII_SEG7_ALPHA_UPPR	\
+	_MAP_91_96_ASCII_SEG7_SYMBOL		\
+	_MAP_97_122_ASCII_SEG7_ALPHA_LOWER	\
+	_MAP_123_126_ASCII_SEG7_SYMBOL
+
+/* This set tries to map as close as possible to the symbolic characteristics
+ * of the ASCII character for maximum discrimination.
+ * For now this means all alpha chars are in lower case representations.
+ * (This for example facilitates the use of hex numbers with uppercase input.)
+ */
+#define MAP_ASCII7SEG_ALPHANUM_LC			\
+	_MAP_0_32_ASCII_SEG7_NON_PRINTABLE	\
+	_MAP_33_47_ASCII_SEG7_SYMBOL		\
+	_MAP_48_57_ASCII_SEG7_NUMERIC		\
+	_MAP_58_64_ASCII_SEG7_SYMBOL		\
+	_MAP_97_122_ASCII_SEG7_ALPHA_LOWER	\
+	_MAP_91_96_ASCII_SEG7_SYMBOL		\
+	_MAP_97_122_ASCII_SEG7_ALPHA_LOWER	\
+	_MAP_123_126_ASCII_SEG7_SYMBOL
+
+#define SEG7_DEFAULT_MAP(_name)		\
+	SEG7_CONVERSION_MAP(_name,MAP_ASCII7SEG_ALPHANUM)
+
+#endif	/* MAP_TO_7SEGMENT_H */
+
diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c
new file mode 100644
index 00000000000..0748281b8f3
--- /dev/null
+++ b/drivers/usb/input/yealink.c
@@ -0,0 +1,1010 @@
+/*
+ * drivers/usb/input/yealink.c
+ *
+ * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+/*
+ * Description:
+ *   Driver for the USB-P1K voip usb phone.
+ *   This device is produced by Yealink Network Technology Co Ltd
+ *   but may be branded under several names:
+ *	- Yealink usb-p1k
+ *	- Tiptel 115
+ *	- ...
+ *
+ * This driver is based on:
+ *   - the usbb2k-api	http://savannah.nongnu.org/projects/usbb2k-api/
+ *   - information from	http://memeteau.free.fr/usbb2k
+ *   - the xpad-driver	drivers/usb/input/xpad.c
+ *
+ * Thanks to:
+ *   - Olivier Vandorpe, for providing the usbb2k-api.
+ *   - Martin Diehl, for spotting my memory allocation bug.
+ *
+ * History:
+ *   20050527 henk	First version, functional keyboard. Keyboard events
+ *			will pop-up on the ../input/eventX bus.
+ *   20050531 henk	Added led, LCD, dialtone and sysfs interface.
+ *   20050610 henk	Cleanups, make it ready for public consumption.
+ *   20050630 henk	Cleanups, fixes in response to comments.
+ *   20050701 henk	sysfs write serialisation, fix potential unload races
+ *   20050801 henk	Added ringtone, restructure USB
+ *   20050816 henk	Merge 2.6.13-rc6
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/rwsem.h>
+#include <linux/usb.h>
+
+#include "map_to_7segment.h"
+#include "yealink.h"
+
+#define DRIVER_VERSION "yld-20050816"
+#define DRIVER_AUTHOR "Henk Vergonet"
+#define DRIVER_DESC "Yealink phone driver"
+
+#define YEALINK_POLLING_FREQUENCY	10	/* in [Hz] */
+
+struct yld_status {
+	u8	lcd[24];
+	u8	led;
+	u8	dialtone;
+	u8	ringtone;
+	u8	keynum;
+} __attribute__ ((packed));
+
+/*
+ * Register the LCD segment and icon map
+ */
+#define _LOC(k,l)	{ .a = (k), .m = (l) }
+#define _SEG(t, a, am, b, bm, c, cm, d, dm, e, em, f, fm, g, gm)	\
+	{ .type	= (t),							\
+	  .u = { .s = {	_LOC(a, am), _LOC(b, bm), _LOC(c, cm),		\
+		        _LOC(d, dm), _LOC(e, em), _LOC(g, gm),		\
+			_LOC(f, fm) } } }
+#define _PIC(t, h, hm, n)						\
+	{ .type	= (t),							\
+ 	  .u = { .p = { .name = (n), .a = (h), .m = (hm) } } }
+
+static const struct lcd_segment_map {
+	char	type;
+	union {
+		struct pictogram_map {
+			u8	a,m;
+			char	name[10];
+		}	p;
+		struct segment_map {
+			u8	a,m;
+		} s[7];
+	} u;
+} lcdMap[] = {
+#include "yealink.h"
+};
+
+struct yealink_dev {
+	struct input_dev idev;		/* input device */
+	struct usb_device *udev;	/* usb device */
+
+	/* irq input channel */
+	struct yld_ctl_packet	*irq_data;
+	dma_addr_t 		irq_dma;
+	struct urb		*urb_irq;
+
+	/* control output channel */
+	struct yld_ctl_packet	*ctl_data;
+	dma_addr_t		ctl_dma;
+	struct usb_ctrlrequest	*ctl_req;
+	dma_addr_t		ctl_req_dma;
+	struct urb		*urb_ctl;
+
+	char phys[64];			/* physical device path */
+
+	u8 lcdMap[ARRAY_SIZE(lcdMap)];	/* state of LCD, LED ... */
+	int key_code;			/* last reported key	 */
+
+	int	stat_ix;
+	union {
+		struct yld_status s;
+		u8		  b[sizeof(struct yld_status)];
+	} master, copy;
+};
+
+
+/*******************************************************************************
+ * Yealink lcd interface
+ ******************************************************************************/
+
+/*
+ * Register a default 7 segment character set
+ */
+static SEG7_DEFAULT_MAP(map_seg7);
+
+ /* Display a char,
+  * char '\9' and '\n' are placeholders and do not overwrite the original text.
+  * A space will always hide an icon.
+  */
+static int setChar(struct yealink_dev *yld, int el, int chr)
+{
+	int i, a, m, val;
+
+	if (el >= ARRAY_SIZE(lcdMap))
+		return -EINVAL;
+
+	if (chr == '\t' || chr == '\n')
+	    return 0;
+
+	yld->lcdMap[el] = chr;
+
+	if (lcdMap[el].type == '.') {
+		a = lcdMap[el].u.p.a;
+		m = lcdMap[el].u.p.m;
+		if (chr != ' ')
+			yld->master.b[a] |= m;
+		else
+			yld->master.b[a] &= ~m;
+		return 0;
+	}
+
+	val = map_to_seg7(&map_seg7, chr);
+	for (i = 0; i < ARRAY_SIZE(lcdMap[0].u.s); i++) {
+		m = lcdMap[el].u.s[i].m;
+
+		if (m == 0)
+			continue;
+
+		a = lcdMap[el].u.s[i].a;
+		if (val & 1)
+			yld->master.b[a] |= m;
+		else
+			yld->master.b[a] &= ~m;
+		val = val >> 1;
+	}
+	return 0;
+};
+
+/*******************************************************************************
+ * Yealink key interface
+ ******************************************************************************/
+
+/* Map device buttons to internal key events.
+ *
+ * USB-P1K button layout:
+ *
+ *             up
+ *       IN           OUT
+ *            down
+ *
+ *     pickup   C    hangup
+ *       1      2      3
+ *       4      5      6
+ *       7      8      9
+ *       *      0      #
+ *
+ * The "up" and "down" keys, are symbolised by arrows on the button.
+ * The "pickup" and "hangup" keys are symbolised by a green and red phone
+ * on the button.
+ */
+static int map_p1k_to_key(int scancode)
+{
+	switch(scancode) {		/* phone key:	*/
+	case 0x23: return KEY_LEFT;	/*   IN		*/
+	case 0x33: return KEY_UP;	/*   up		*/
+	case 0x04: return KEY_RIGHT;	/*   OUT	*/
+	case 0x24: return KEY_DOWN;	/*   down	*/
+	case 0x03: return KEY_ENTER;	/*   pickup	*/
+	case 0x14: return KEY_BACKSPACE; /*  C		*/
+	case 0x13: return KEY_ESC;	/*   hangup	*/
+	case 0x00: return KEY_1;	/*   1		*/
+	case 0x01: return KEY_2;	/*   2 		*/
+	case 0x02: return KEY_3;	/*   3		*/
+	case 0x10: return KEY_4;	/*   4		*/
+	case 0x11: return KEY_5;	/*   5		*/
+	case 0x12: return KEY_6;	/*   6		*/
+	case 0x20: return KEY_7;	/*   7		*/
+	case 0x21: return KEY_8;	/*   8		*/
+	case 0x22: return KEY_9;	/*   9		*/
+	case 0x30: return KEY_KPASTERISK; /* *		*/
+	case 0x31: return KEY_0;	/*   0		*/
+	case 0x32: return KEY_LEFTSHIFT |
+			  KEY_3 << 8;	/*   #		*/
+	}
+	return -EINVAL;
+}
+
+/* Completes a request by converting the data into events for the
+ * input subsystem.
+ *
+ * The key parameter can be cascaded: key2 << 8 | key1
+ */
+static void report_key(struct yealink_dev *yld, int key, struct pt_regs *regs)
+{
+	struct input_dev *idev = &yld->idev;
+
+	input_regs(idev, regs);
+	if (yld->key_code >= 0) {
+		/* old key up */
+		input_report_key(idev, yld->key_code & 0xff, 0);
+		if (yld->key_code >> 8)
+			input_report_key(idev, yld->key_code >> 8, 0);
+	}
+
+	yld->key_code = key;
+	if (key >= 0) {
+		/* new valid key */
+		input_report_key(idev, key & 0xff, 1);
+		if (key >> 8)
+			input_report_key(idev, key >> 8, 1);
+	}
+	input_sync(idev);
+}
+
+/*******************************************************************************
+ * Yealink usb communication interface
+ ******************************************************************************/
+
+static int yealink_cmd(struct yealink_dev *yld, struct yld_ctl_packet *p)
+{
+	u8	*buf = (u8 *)p;
+	int	i;
+	u8	sum = 0;
+
+	for(i=0; i<USB_PKT_LEN-1; i++)
+		sum -= buf[i];
+	p->sum = sum;
+	return usb_control_msg(yld->udev,
+			usb_sndctrlpipe(yld->udev, 0),
+			USB_REQ_SET_CONFIGURATION,
+			USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			0x200, 3,
+			p, sizeof(*p),
+			USB_CTRL_SET_TIMEOUT);
+}
+
+static u8 default_ringtone[] = {
+	0xEF,			/* volume [0-255] */
+	0xFB, 0x1E, 0x00, 0x0C,	/* 1250 [hz], 12/100 [s] */
+	0xFC, 0x18, 0x00, 0x0C,	/* 1000 [hz], 12/100 [s] */
+	0xFB, 0x1E, 0x00, 0x0C,
+	0xFC, 0x18, 0x00, 0x0C,
+	0xFB, 0x1E, 0x00, 0x0C,
+	0xFC, 0x18, 0x00, 0x0C,
+	0xFB, 0x1E, 0x00, 0x0C,
+	0xFC, 0x18, 0x00, 0x0C,
+	0xFF, 0xFF, 0x01, 0x90,	/* silent, 400/100 [s] */
+	0x00, 0x00		/* end of sequence */
+};
+
+static int yealink_set_ringtone(struct yealink_dev *yld, u8 *buf, size_t size)
+{
+	struct yld_ctl_packet *p = yld->ctl_data;
+	int	ix, len;
+
+	if (size <= 0)
+		return -EINVAL;
+
+	/* Set the ringtone volume */
+	memset(yld->ctl_data, 0, sizeof(*(yld->ctl_data)));
+	yld->ctl_data->cmd	= CMD_RING_VOLUME;
+	yld->ctl_data->size	= 1;
+	yld->ctl_data->data[0]	= buf[0];
+	yealink_cmd(yld, p);
+
+	buf++;
+	size--;
+
+	p->cmd = CMD_RING_NOTE;
+	ix = 0;
+	while (size != ix) {
+		len = size - ix;
+		if (len > sizeof(p->data))
+			len = sizeof(p->data);
+		p->size	  = len;
+		p->offset = htons(ix);
+		memcpy(p->data, &buf[ix], len);
+		yealink_cmd(yld, p);
+		ix += len;
+	}
+	return 0;
+}
+
+/* keep stat_master & stat_copy in sync.
+ */
+static int yealink_do_idle_tasks(struct yealink_dev *yld)
+{
+	u8 val;
+	int i, ix, len;
+
+	ix = yld->stat_ix;
+
+	memset(yld->ctl_data, 0, sizeof(*(yld->ctl_data)));
+	yld->ctl_data->cmd  = CMD_KEYPRESS;
+	yld->ctl_data->size = 1;
+	yld->ctl_data->sum  = 0xff - CMD_KEYPRESS;
+
+	/* If state update pointer wraps do a KEYPRESS first. */
+	if (ix >= sizeof(yld->master)) {
+		yld->stat_ix = 0;
+		return 0;
+	}
+
+	/* find update candidates: copy != master */
+	do {
+		val = yld->master.b[ix];
+		if (val != yld->copy.b[ix])
+			goto send_update;
+	} while (++ix < sizeof(yld->master));
+
+	/* nothing todo, wait a bit and poll for a KEYPRESS */
+	yld->stat_ix = 0;
+	/* TODO how can we wait abit. ??
+	 * msleep_interruptible(1000 / YEALINK_POLLING_FREQUENCY);
+	 */
+	return 0;
+
+send_update:
+
+	/* Setup an appropriate update request */
+	yld->copy.b[ix] = val;
+	yld->ctl_data->data[0] = val;
+
+	switch(ix) {
+	case offsetof(struct yld_status, led):
+		yld->ctl_data->cmd	= CMD_LED;
+		yld->ctl_data->sum	= -1 - CMD_LED - val;
+		break;
+	case offsetof(struct yld_status, dialtone):
+		yld->ctl_data->cmd	= CMD_DIALTONE;
+		yld->ctl_data->sum	= -1 - CMD_DIALTONE - val;
+		break;
+	case offsetof(struct yld_status, ringtone):
+		yld->ctl_data->cmd	= CMD_RINGTONE;
+		yld->ctl_data->sum	= -1 - CMD_RINGTONE - val;
+		break;
+	case offsetof(struct yld_status, keynum):
+		val--;
+		val &= 0x1f;
+		yld->ctl_data->cmd	= CMD_SCANCODE;
+		yld->ctl_data->offset	= htons(val);
+		yld->ctl_data->data[0]	= 0;
+		yld->ctl_data->sum	= -1 - CMD_SCANCODE - val;
+		break;
+	default:
+		len = sizeof(yld->master.s.lcd) - ix;
+		if (len > sizeof(yld->ctl_data->data))
+			len = sizeof(yld->ctl_data->data);
+
+		/* Combine up to <len> consecutive LCD bytes in a singe request
+		 */
+		yld->ctl_data->cmd	= CMD_LCD;
+		yld->ctl_data->offset	= htons(ix);
+		yld->ctl_data->size	= len;
+		yld->ctl_data->sum	= -CMD_LCD - ix - val - len;
+		for(i=1; i<len; i++) {
+			ix++;
+			val = yld->master.b[ix];
+			yld->copy.b[ix]		= val;
+			yld->ctl_data->data[i]	= val;
+			yld->ctl_data->sum     -= val;
+		}
+	}
+	yld->stat_ix = ix + 1;
+	return 1;
+}
+
+/* Decide on how to handle responses
+ *
+ * The state transition diagram is somethhing like:
+ *
+ *          syncState<--+
+ *               |      |
+ *               |    idle
+ *              \|/     |
+ * init --ok--> waitForKey --ok--> getKey
+ *  ^               ^                |
+ *  |               +-------ok-------+
+ * error,start
+ *
+ */
+static void urb_irq_callback(struct urb *urb, struct pt_regs *regs)
+{
+	struct yealink_dev *yld = urb->context;
+	int ret;
+
+	if (urb->status)
+		err("%s - urb status %d", __FUNCTION__, urb->status);
+
+	switch (yld->irq_data->cmd) {
+	case CMD_KEYPRESS:
+
+		yld->master.s.keynum = yld->irq_data->data[0];
+		break;
+
+	case CMD_SCANCODE:
+		dbg("get scancode %x", yld->irq_data->data[0]);
+
+		report_key(yld, map_p1k_to_key(yld->irq_data->data[0]), regs);
+		break;
+
+	default:
+		err("unexpected response %x", yld->irq_data->cmd);
+	}
+
+	yealink_do_idle_tasks(yld);
+
+	ret = usb_submit_urb(yld->urb_ctl, GFP_ATOMIC);
+	if (ret)
+		err("%s - usb_submit_urb failed %d", __FUNCTION__, ret);
+}
+
+static void urb_ctl_callback(struct urb *urb, struct pt_regs *regs)
+{
+	struct yealink_dev *yld = urb->context;
+	int ret;
+
+	if (urb->status)
+		err("%s - urb status %d", __FUNCTION__, urb->status);
+
+	switch (yld->ctl_data->cmd) {
+	case CMD_KEYPRESS:
+	case CMD_SCANCODE:
+		/* ask for a response */
+		ret = usb_submit_urb(yld->urb_irq, GFP_ATOMIC);
+		break;
+	default:
+		/* send new command */
+		yealink_do_idle_tasks(yld);
+		ret = usb_submit_urb(yld->urb_ctl, GFP_ATOMIC);
+	}
+
+	if (ret)
+		err("%s - usb_submit_urb failed %d", __FUNCTION__, ret);
+}
+
+/*******************************************************************************
+ * input event interface
+ ******************************************************************************/
+
+/* TODO should we issue a ringtone on a SND_BELL event?
+static int input_ev(struct input_dev *dev, unsigned int type,
+		unsigned int code, int value)
+{
+
+	if (type != EV_SND)
+		return -EINVAL;
+
+	switch (code) {
+	case SND_BELL:
+	case SND_TONE:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+*/
+
+static int input_open(struct input_dev *dev)
+{
+	struct yealink_dev *yld = dev->private;
+	int i, ret;
+
+	dbg("%s", __FUNCTION__);
+
+	/* force updates to device */
+	for (i = 0; i<sizeof(yld->master); i++)
+		yld->copy.b[i] = ~yld->master.b[i];
+	yld->key_code = -1;	/* no keys pressed */
+
+        yealink_set_ringtone(yld, default_ringtone, sizeof(default_ringtone));
+
+	/* issue INIT */
+	memset(yld->ctl_data, 0, sizeof(*(yld->ctl_data)));
+	yld->ctl_data->cmd	= CMD_INIT;
+	yld->ctl_data->size	= 10;
+	yld->ctl_data->sum	= 0x100-CMD_INIT-10;
+	if ((ret = usb_submit_urb(yld->urb_ctl, GFP_KERNEL)) != 0) {
+		dbg("%s - usb_submit_urb failed with result %d",
+		     __FUNCTION__, ret);
+		return ret;
+	}
+	return 0;
+}
+
+static void input_close(struct input_dev *dev)
+{
+	struct yealink_dev *yld = dev->private;
+
+	usb_kill_urb(yld->urb_ctl);
+	usb_kill_urb(yld->urb_irq);
+}
+
+/*******************************************************************************
+ * sysfs interface
+ ******************************************************************************/
+
+static DECLARE_RWSEM(sysfs_rwsema);
+
+/* Interface to the 7-segments translation table aka. char set.
+ */
+static ssize_t show_map(struct device *dev, struct device_attribute *attr,
+				char *buf)
+{
+	memcpy(buf, &map_seg7, sizeof(map_seg7));
+	return sizeof(map_seg7);
+}
+
+static ssize_t store_map(struct device *dev, struct device_attribute *attr,
+				const char *buf, size_t cnt)
+{
+	if (cnt != sizeof(map_seg7))
+		return -EINVAL;
+	memcpy(&map_seg7, buf, sizeof(map_seg7));
+	return sizeof(map_seg7);
+}
+
+/* Interface to the LCD.
+ */
+
+/* Reading /sys/../lineX will return the format string with its settings:
+ *
+ * Example:
+ * cat ./line3
+ * 888888888888
+ * Linux Rocks!
+ */
+static ssize_t show_line(struct device *dev, char *buf, int a, int b)
+{
+	struct yealink_dev *yld;
+	int i;
+
+	down_read(&sysfs_rwsema);
+	yld = dev_get_drvdata(dev);
+	if (yld == NULL) {
+		up_read(&sysfs_rwsema);
+		return -ENODEV;
+	}
+
+	for (i = a; i < b; i++)
+		*buf++ = lcdMap[i].type;
+	*buf++ = '\n';
+	for (i = a; i < b; i++)
+		*buf++ = yld->lcdMap[i];
+	*buf++ = '\n';
+	*buf = 0;
+
+	up_read(&sysfs_rwsema);
+	return 3 + ((b - a) << 1);
+}
+
+static ssize_t show_line1(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	return show_line(dev, buf, LCD_LINE1_OFFSET, LCD_LINE2_OFFSET);
+}
+
+static ssize_t show_line2(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	return show_line(dev, buf, LCD_LINE2_OFFSET, LCD_LINE3_OFFSET);
+}
+
+static ssize_t show_line3(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	return show_line(dev, buf, LCD_LINE3_OFFSET, LCD_LINE4_OFFSET);
+}
+
+/* Writing to /sys/../lineX will set the coresponding LCD line.
+ * - Excess characters are ignored.
+ * - If less characters are written than allowed, the remaining digits are
+ *   unchanged.
+ * - The '\n' or '\t' char is a placeholder, it does not overwrite the
+ *   original content.
+ */
+static ssize_t store_line(struct device *dev, const char *buf, size_t count,
+		int el, size_t len)
+{
+	struct yealink_dev *yld;
+	int i;
+
+	down_write(&sysfs_rwsema);
+	yld = dev_get_drvdata(dev);
+	if (yld == NULL) {
+		up_write(&sysfs_rwsema);
+		return -ENODEV;
+	}
+
+	if (len > count)
+		len = count;
+	for (i = 0; i < len; i++)
+		setChar(yld, el++, buf[i]);
+
+	up_write(&sysfs_rwsema);
+	return count;
+}
+
+static ssize_t store_line1(struct device *dev, struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	return store_line(dev, buf, count, LCD_LINE1_OFFSET, LCD_LINE1_SIZE);
+}
+
+static ssize_t store_line2(struct device *dev, struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	return store_line(dev, buf, count, LCD_LINE2_OFFSET, LCD_LINE2_SIZE);
+}
+
+static ssize_t store_line3(struct device *dev, struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	return store_line(dev, buf, count, LCD_LINE3_OFFSET, LCD_LINE3_SIZE);
+}
+
+/* Interface to visible and audible "icons", these include:
+ * pictures on the LCD, the LED, and the dialtone signal.
+ */
+
+/* Get a list of "switchable elements" with their current state. */
+static ssize_t get_icons(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct yealink_dev *yld;
+	int i, ret = 1;
+
+	down_read(&sysfs_rwsema);
+	yld = dev_get_drvdata(dev);
+	if (yld == NULL) {
+		up_read(&sysfs_rwsema);
+		return -ENODEV;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(lcdMap); i++) {
+		if (lcdMap[i].type != '.')
+			continue;
+		ret += sprintf(&buf[ret], "%s %s\n",
+				yld->lcdMap[i] == ' ' ? "  " : "on",
+				lcdMap[i].u.p.name);
+	}
+	up_read(&sysfs_rwsema);
+	return ret;
+}
+
+/* Change the visibility of a particular element. */
+static ssize_t set_icon(struct device *dev, const char *buf, size_t count,
+			int chr)
+{
+	struct yealink_dev *yld;
+	int i;
+
+	down_write(&sysfs_rwsema);
+	yld = dev_get_drvdata(dev);
+	if (yld == NULL) {
+		up_write(&sysfs_rwsema);
+		return -ENODEV;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(lcdMap); i++) {
+		if (lcdMap[i].type != '.')
+			continue;
+		if (strncmp(buf, lcdMap[i].u.p.name, count) == 0) {
+			setChar(yld, i, chr);
+			break;
+		}
+	}
+
+	up_write(&sysfs_rwsema);
+	return count;
+}
+
+static ssize_t show_icon(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	return set_icon(dev, buf, count, buf[0]);
+}
+
+static ssize_t hide_icon(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	return set_icon(dev, buf, count, ' ');
+}
+
+/* Upload a ringtone to the device.
+ */
+
+/* Stores raw ringtone data in the phone */
+static ssize_t store_ringtone(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct yealink_dev *yld;
+
+	down_write(&sysfs_rwsema);
+	yld = dev_get_drvdata(dev);
+	if (yld == NULL) {
+		up_write(&sysfs_rwsema);
+		return -ENODEV;
+	}
+
+	/* TODO locking with async usb control interface??? */
+	yealink_set_ringtone(yld, (char *)buf, count);
+	up_write(&sysfs_rwsema);
+	return count;
+}
+
+#define _M444	S_IRUGO
+#define _M664	S_IRUGO|S_IWUSR|S_IWGRP
+#define _M220	S_IWUSR|S_IWGRP
+
+static DEVICE_ATTR(map_seg7	, _M664, show_map	, store_map	);
+static DEVICE_ATTR(line1	, _M664, show_line1	, store_line1	);
+static DEVICE_ATTR(line2	, _M664, show_line2	, store_line2	);
+static DEVICE_ATTR(line3	, _M664, show_line3	, store_line3	);
+static DEVICE_ATTR(get_icons	, _M444, get_icons	, NULL		);
+static DEVICE_ATTR(show_icon	, _M220, NULL		, show_icon	);
+static DEVICE_ATTR(hide_icon	, _M220, NULL		, hide_icon	);
+static DEVICE_ATTR(ringtone	, _M220, NULL		, store_ringtone);
+
+static struct attribute *yld_attributes[] = {
+	&dev_attr_line1.attr,
+	&dev_attr_line2.attr,
+	&dev_attr_line3.attr,
+	&dev_attr_get_icons.attr,
+	&dev_attr_show_icon.attr,
+	&dev_attr_hide_icon.attr,
+	&dev_attr_map_seg7.attr,
+	&dev_attr_ringtone.attr,
+	NULL
+};
+
+static struct attribute_group yld_attr_group = {
+	.attrs = yld_attributes
+};
+
+/*******************************************************************************
+ * Linux interface and usb initialisation
+ ******************************************************************************/
+
+static const struct yld_device {
+	u16 idVendor;
+	u16 idProduct;
+	char *name;
+} yld_device[] = {
+	{ 0x6993, 0xb001, "Yealink usb-p1k" },
+};
+
+static struct usb_device_id usb_table [] = {
+	{ USB_INTERFACE_INFO(USB_CLASS_HID, 0, 0) },
+	{ }
+};
+
+static int usb_cleanup(struct yealink_dev *yld, int err)
+{
+	if (yld == NULL)
+		return err;
+
+        if (yld->urb_irq) {
+		usb_kill_urb(yld->urb_irq);
+		usb_free_urb(yld->urb_irq);
+	}
+        if (yld->urb_ctl)
+		usb_free_urb(yld->urb_ctl);
+        if (yld->idev.dev)
+		input_unregister_device(&yld->idev);
+	if (yld->ctl_req)
+		usb_buffer_free(yld->udev, sizeof(*(yld->ctl_req)),
+				yld->ctl_req, yld->ctl_req_dma);
+	if (yld->ctl_data)
+		usb_buffer_free(yld->udev, USB_PKT_LEN,
+				yld->ctl_data, yld->ctl_dma);
+	if (yld->irq_data)
+		usb_buffer_free(yld->udev, USB_PKT_LEN,
+				yld->irq_data, yld->irq_dma);
+	kfree(yld);
+	return err;
+}
+
+static void usb_disconnect(struct usb_interface *intf)
+{
+	struct yealink_dev *yld;
+
+	down_write(&sysfs_rwsema);
+	yld = usb_get_intfdata(intf);
+	sysfs_remove_group(&intf->dev.kobj, &yld_attr_group);
+	usb_set_intfdata(intf, NULL);
+	up_write(&sysfs_rwsema);
+
+	usb_cleanup(yld, 0);
+}
+
+static int usb_match(struct usb_device *udev)
+{
+	int i;
+	for (i = 0; i < ARRAY_SIZE(yld_device); i++) {
+		if ((udev->descriptor.idVendor == yld_device[i].idVendor) &&
+		    (udev->descriptor.idProduct == yld_device[i].idProduct))
+			return i;
+	}
+	return -ENODEV;
+}
+
+static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev (intf);
+	struct usb_host_interface *interface;
+	struct usb_endpoint_descriptor *endpoint;
+	struct yealink_dev *yld;
+	char path[64];
+	int ret, pipe, i;
+
+	i = usb_match(udev);
+	if (i < 0)
+		return -ENODEV;
+
+	interface = intf->cur_altsetting;
+	endpoint = &interface->endpoint[0].desc;
+	if (!(endpoint->bEndpointAddress & 0x80))
+		return -EIO;
+	if ((endpoint->bmAttributes & 3) != 3)
+		return -EIO;
+
+	if ((yld = kmalloc(sizeof(struct yealink_dev), GFP_KERNEL)) == NULL)
+		return -ENOMEM;
+
+	memset(yld, 0, sizeof(*yld));
+	yld->udev = udev;
+
+	/* allocate usb buffers */
+	yld->irq_data = usb_buffer_alloc(udev, USB_PKT_LEN,
+					SLAB_ATOMIC, &yld->irq_dma);
+	if (yld->irq_data == NULL)
+		return usb_cleanup(yld, -ENOMEM);
+
+	yld->ctl_data = usb_buffer_alloc(udev, USB_PKT_LEN,
+					SLAB_ATOMIC, &yld->ctl_dma);
+	if (!yld->ctl_data)
+		return usb_cleanup(yld, -ENOMEM);
+
+	yld->ctl_req = usb_buffer_alloc(udev, sizeof(*(yld->ctl_req)),
+					SLAB_ATOMIC, &yld->ctl_req_dma);
+	if (yld->ctl_req == NULL)
+		return usb_cleanup(yld, -ENOMEM);
+
+	/* allocate urb structures */
+	yld->urb_irq = usb_alloc_urb(0, GFP_KERNEL);
+        if (yld->urb_irq == NULL)
+		return usb_cleanup(yld, -ENOMEM);
+
+	yld->urb_ctl = usb_alloc_urb(0, GFP_KERNEL);
+        if (yld->urb_ctl == NULL)
+		return usb_cleanup(yld, -ENOMEM);
+
+	/* get a handle to the interrupt data pipe */
+	pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
+	ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+	if (ret != USB_PKT_LEN)
+		err("invalid payload size %d, expected %d", ret, USB_PKT_LEN);
+
+	/* initialise irq urb */
+	usb_fill_int_urb(yld->urb_irq, udev, pipe, yld->irq_data,
+			USB_PKT_LEN,
+			urb_irq_callback,
+			yld, endpoint->bInterval);
+	yld->urb_irq->transfer_dma = yld->irq_dma;
+	yld->urb_irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+	yld->urb_irq->dev = udev;
+
+	/* initialise ctl urb */
+	yld->ctl_req->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE |
+				      USB_DIR_OUT;
+	yld->ctl_req->bRequest	= USB_REQ_SET_CONFIGURATION;
+	yld->ctl_req->wValue	= cpu_to_le16(0x200);
+	yld->ctl_req->wIndex	= cpu_to_le16(interface->desc.bInterfaceNumber);
+	yld->ctl_req->wLength	= cpu_to_le16(USB_PKT_LEN);
+
+	usb_fill_control_urb(yld->urb_ctl, udev, usb_sndctrlpipe(udev, 0),
+			(void *)yld->ctl_req, yld->ctl_data, USB_PKT_LEN,
+			urb_ctl_callback, yld);
+	yld->urb_ctl->setup_dma	= yld->ctl_req_dma;
+	yld->urb_ctl->transfer_dma	= yld->ctl_dma;
+	yld->urb_ctl->transfer_flags	|= URB_NO_SETUP_DMA_MAP |
+					URB_NO_TRANSFER_DMA_MAP;
+	yld->urb_ctl->dev = udev;
+
+	/* find out the physical bus location */
+	if (usb_make_path(udev, path, sizeof(path)) > 0)
+		snprintf(yld->phys, sizeof(yld->phys)-1,  "%s/input0", path);
+
+	/* register settings for the input device */
+	init_input_dev(&yld->idev);
+	yld->idev.private	= yld;
+	yld->idev.id.bustype	= BUS_USB;
+	yld->idev.id.vendor	= le16_to_cpu(udev->descriptor.idVendor);
+	yld->idev.id.product	= le16_to_cpu(udev->descriptor.idProduct);
+	yld->idev.id.version	= le16_to_cpu(udev->descriptor.bcdDevice);
+	yld->idev.dev		= &intf->dev;
+	yld->idev.name		= yld_device[i].name;
+	yld->idev.phys		= yld->phys;
+	/* yld->idev.event		= input_ev;	TODO */
+	yld->idev.open		= input_open;
+	yld->idev.close		= input_close;
+
+	/* register available key events */
+	yld->idev.evbit[0] = BIT(EV_KEY);
+	for (i = 0; i < 256; i++) {
+		int k = map_p1k_to_key(i);
+		if (k >= 0) {
+			set_bit(k & 0xff, yld->idev.keybit);
+			if (k >> 8)
+				set_bit(k >> 8, yld->idev.keybit);
+		}
+	}
+
+	printk(KERN_INFO "input: %s on %s\n", yld->idev.name, path);
+
+	input_register_device(&yld->idev);
+
+	usb_set_intfdata(intf, yld);
+
+	/* clear visible elements */
+	for (i=0; i<ARRAY_SIZE(lcdMap); i++)
+		setChar(yld, i, ' ');
+
+	/* display driver version on LCD line 3 */
+	store_line3(&intf->dev, NULL,
+			DRIVER_VERSION, sizeof(DRIVER_VERSION));
+
+	/* Register sysfs hooks (don't care about failure) */
+	sysfs_create_group(&intf->dev.kobj, &yld_attr_group);
+	return 0;
+}
+
+static struct usb_driver yealink_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "yealink",
+	.probe		= usb_probe,
+	.disconnect	= usb_disconnect,
+	.id_table	= usb_table,
+};
+
+static int __init yealink_dev_init(void)
+{
+	int ret = usb_register(&yealink_driver);
+	if (ret == 0)
+		info(DRIVER_DESC ":" DRIVER_VERSION);
+	return ret;
+}
+
+static void __exit yealink_dev_exit(void)
+{
+	usb_deregister(&yealink_driver);
+}
+
+module_init(yealink_dev_init);
+module_exit(yealink_dev_exit);
+
+MODULE_DEVICE_TABLE (usb, usb_table);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/input/yealink.h b/drivers/usb/input/yealink.h
new file mode 100644
index 00000000000..48af0be9cbd
--- /dev/null
+++ b/drivers/usb/input/yealink.h
@@ -0,0 +1,220 @@
+/*
+ * drivers/usb/input/yealink.h
+ *
+ * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef INPUT_YEALINK_H
+#define INPUT_YEALINK_H
+
+/* Using the control channel on interface 3 various aspects of the phone
+ * can be controlled like LCD, LED, dialtone and the ringtone.
+ */
+
+struct yld_ctl_packet {
+	u8	cmd;		/* command code, see below */
+	u8	size;		/* 1-11, size of used data bytes. */
+	u16	offset;		/* internal packet offset */
+	u8	data[11];
+	s8	sum;		/* negative sum of 15 preceding bytes */
+} __attribute__ ((packed));
+
+#define USB_PKT_LEN	sizeof(struct yld_ctl_packet)
+
+/* The following yld_ctl_packet's are available: */
+
+/* Init registers
+ *
+ * cmd		0x8e
+ * size		10
+ * offset	0
+ * data		0,0,0,0....
+ */
+#define CMD_INIT		0x8e
+
+/* Request key scan
+ *
+ * cmd		0x80
+ * size		1
+ * offset	0
+ * data[0]	on return returns the key number, if it changes there's a new
+ * 		key pressed.
+ */
+#define CMD_KEYPRESS		0x80
+
+/* Request scancode
+ *
+ * cmd		0x81
+ * size		1
+ * offset	key number [0-1f]
+ * data[0]	on return returns the scancode
+ */
+#define CMD_SCANCODE		0x81
+
+/* Set LCD
+ *
+ * cmd		0x04
+ * size		1-11
+ * offset	0-23
+ * data		segment bits
+ */
+#define CMD_LCD			0x04
+
+/* Set led
+ *
+ * cmd		0x05
+ * size		1
+ * offset	0
+ * data[0]	0 OFF / 1 ON
+ */
+#define CMD_LED			0x05
+
+/* Set ringtone volume
+ *
+ * cmd		0x11
+ * size		1
+ * offset	0
+ * data[0]	0-0xff  volume
+ */
+#define CMD_RING_VOLUME		0x11
+
+/* Set ringtone notes
+ *
+ * cmd		0x02
+ * size		1-11
+ * offset	0->
+ * data		binary representation LE16(-freq), LE16(duration) ....
+ */
+#define CMD_RING_NOTE		0x02
+
+/* Sound ringtone via the speaker on the back
+ *
+ * cmd		0x03
+ * size		1
+ * offset	0
+ * data[0]	0 OFF / 0x24 ON
+ */
+#define CMD_RINGTONE		0x03
+
+/* Sound dial tone via the ear speaker
+ *
+ * cmd		0x09
+ * size		1
+ * offset	0
+ * data[0]	0 OFF / 1 ON
+ */
+#define CMD_DIALTONE		0x09
+
+#endif /* INPUT_YEALINK_H */
+
+
+#if defined(_SEG) && defined(_PIC)
+/* This table maps the LCD segments onto individual bit positions in the
+ * yld_status struct.
+ */
+
+/* LCD, each segment must be driven seperately.
+ *
+ * Layout:
+ *
+ *   |[]   [][]   [][]   [][]   in   |[][]
+ *   |[] M [][] D [][] : [][]   out  |[][]
+ *                             store
+ *
+ *    NEW REP         SU MO TU WE TH FR SA
+ *
+ *    [] [] [] [] [] [] [] [] [] [] [] []
+ *    [] [] [] [] [] [] [] [] [] [] [] []
+ */
+
+/* Line 1
+ *	Format		: 18.e8.M8.88...188
+ *	Icon names	: M D : IN OUT STORE
+ */
+#define LCD_LINE1_OFFSET	0
+#define LCD_LINE1_SIZE		17
+
+/* Note: first g then f =>			       !      !      */
+/* _SEG(    type    a      b      c      d      e      g      f   )  */
+	_SEG('1',  0,0 , 22,2 , 22,2 ,  0,0 ,  0,0 ,  0,0 ,  0,0	),
+	_SEG('8', 20,1 , 20,2 , 20,4 , 20,8 , 21,4 , 21,2 , 21,1	),
+	_PIC('.', 22,1 , "M"						),
+	_SEG('e', 18,1 , 18,2 , 18,4 , 18,1 , 19,2 , 18,1 , 19,1	),
+	_SEG('8', 16,1 , 16,2 , 16,4 , 16,8 , 17,4 , 17,2 , 17,1	),
+	_PIC('.', 15,8 , "D"						),
+	_SEG('M', 14,1 , 14,2 , 14,4 , 14,1 , 15,4 , 15,2 , 15,1	),
+	_SEG('8', 12,1 , 12,2 , 12,4 , 12,8 , 13,4 , 13,2 , 13,1	),
+	_PIC('.', 11,8 , ":"						),
+	_SEG('8', 10,1 , 10,2 , 10,4 , 10,8 , 11,4 , 11,2 , 11,1	),
+	_SEG('8',  8,1 ,  8,2 ,  8,4 ,  8,8 ,  9,4 ,  9,2 ,  9,1	),
+	_PIC('.',  7,1 , "IN"						),
+	_PIC('.',  7,2 , "OUT"						),
+	_PIC('.',  7,4 , "STORE"					),
+	_SEG('1',  0,0 ,  5,1 ,  5,1 ,  0,0 ,  0,0 ,  0,0 ,  0,0	),
+	_SEG('8',  4,1 ,  4,2 ,  4,4 ,  4,8 ,  5,8 ,  5,4 ,  5,2	),
+	_SEG('8',  2,1 ,  2,2 ,  2,4 ,  2,8 ,  3,4 ,  3,2 ,  3,1	),
+
+/* Line 2
+ *	Format		: .........
+ *	Pict. name	: NEW REP SU MO TU WE TH FR SA
+ */
+#define LCD_LINE2_OFFSET	LCD_LINE1_OFFSET + LCD_LINE1_SIZE
+#define LCD_LINE2_SIZE		9
+
+	_PIC('.', 23,2 , "NEW"	),
+	_PIC('.', 23,4 , "REP"	),
+	_PIC('.',  1,8 , "SU"	),
+	_PIC('.',  1,4 , "MO"	),
+	_PIC('.',  1,2 , "TU"	),
+	_PIC('.',  1,1 , "WE"	),
+	_PIC('.',  0,1 , "TH"	),
+	_PIC('.',  0,2 , "FR"	),
+	_PIC('.',  0,4 , "SA"	),
+
+/* Line 3
+ *	Format		: 888888888888
+ */
+#define LCD_LINE3_OFFSET	LCD_LINE2_OFFSET + LCD_LINE2_SIZE
+#define LCD_LINE3_SIZE		12
+
+	_SEG('8', 22,16, 22,32, 22,64, 22,128, 23,128, 23,64, 23,32  ),
+	_SEG('8', 20,16, 20,32, 20,64, 20,128, 21,128, 21,64, 21,32  ),
+	_SEG('8', 18,16, 18,32, 18,64, 18,128, 19,128, 19,64, 19,32  ),
+	_SEG('8', 16,16, 16,32, 16,64, 16,128, 17,128, 17,64, 17,32  ),
+	_SEG('8', 14,16, 14,32, 14,64, 14,128, 15,128, 15,64, 15,32  ),
+	_SEG('8', 12,16, 12,32, 12,64, 12,128, 13,128, 13,64, 13,32  ),
+	_SEG('8', 10,16, 10,32, 10,64, 10,128, 11,128, 11,64, 11,32  ),
+	_SEG('8',  8,16,  8,32,  8,64,  8,128,  9,128,  9,64,  9,32  ),
+	_SEG('8',  6,16,  6,32,  6,64,  6,128,  7,128,  7,64,  7,32  ),
+	_SEG('8',  4,16,  4,32,  4,64,  4,128,  5,128,  5,64,  5,32  ),
+	_SEG('8',  2,16,  2,32,  2,64,  2,128,  3,128,  3,64,  3,32  ),
+	_SEG('8',  0,16,  0,32,  0,64,  0,128,  1,128,  1,64,  1,32  ),
+
+/* Line 4
+ *
+ * The LED, DIALTONE and RINGTONE are implemented as icons and use the same
+ * sysfs interface.
+ */
+#define LCD_LINE4_OFFSET	LCD_LINE3_OFFSET + LCD_LINE3_SIZE
+
+	_PIC('.', offsetof(struct yld_status, led)	, 0x01, "LED" ),
+	_PIC('.', offsetof(struct yld_status, dialtone) , 0x01, "DIALTONE" ),
+	_PIC('.', offsetof(struct yld_status, ringtone) , 0x24, "RINGTONE" ),
+
+#undef _SEG
+#undef _PIC
+#endif /* _SEG && _PIC */