Merge ../scsi-misc-2.6

Conflicts:

	drivers/scsi/nsp32.c
	drivers/scsi/pcmcia/nsp_cs.c

Removal of randomness flag conflicts with SA_ -> IRQF_ global
replacement.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

67 files changed, 4385 insertions, 2833 deletions

diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c
index b2c033edb03..34b0da5cfa0 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.c
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.c
@@ -437,159 +437,50 @@ iscsi_iser_session_create(struct iscsi_transport *iscsit,
 }
 
 static int
-iscsi_iser_conn_set_param(struct iscsi_cls_conn *cls_conn,
-			  enum iscsi_param param, uint32_t value)
+iscsi_iser_set_param(struct iscsi_cls_conn *cls_conn,
+		     enum iscsi_param param, char *buf, int buflen)
 {
-	struct iscsi_conn *conn = cls_conn->dd_data;
-	struct iscsi_session *session = conn->session;
-
-	spin_lock_bh(&session->lock);
-	if (conn->c_stage != ISCSI_CONN_INITIAL_STAGE &&
-	    conn->stop_stage != STOP_CONN_RECOVER) {
-		printk(KERN_ERR "iscsi_iser: can not change parameter [%d]\n",
-		       param);
-		spin_unlock_bh(&session->lock);
-		return 0;
-	}
-	spin_unlock_bh(&session->lock);
+	int value;
 
 	switch (param) {
 	case ISCSI_PARAM_MAX_RECV_DLENGTH:
 		/* TBD */
 		break;
-	case ISCSI_PARAM_MAX_XMIT_DLENGTH:
-		conn->max_xmit_dlength =  value;
-		break;
 	case ISCSI_PARAM_HDRDGST_EN:
+		sscanf(buf, "%d", &value);
 		if (value) {
 			printk(KERN_ERR "DataDigest wasn't negotiated to None");
 			return -EPROTO;
 		}
 		break;
 	case ISCSI_PARAM_DATADGST_EN:
+		sscanf(buf, "%d", &value);
 		if (value) {
 			printk(KERN_ERR "DataDigest wasn't negotiated to None");
 			return -EPROTO;
 		}
 		break;
-	case ISCSI_PARAM_INITIAL_R2T_EN:
-		session->initial_r2t_en = value;
-		break;
-	case ISCSI_PARAM_IMM_DATA_EN:
-		session->imm_data_en = value;
-		break;
-	case ISCSI_PARAM_FIRST_BURST:
-		session->first_burst = value;
-		break;
-	case ISCSI_PARAM_MAX_BURST:
-		session->max_burst = value;
-		break;
-	case ISCSI_PARAM_PDU_INORDER_EN:
-		session->pdu_inorder_en = value;
-		break;
-	case ISCSI_PARAM_DATASEQ_INORDER_EN:
-		session->dataseq_inorder_en = value;
-		break;
-	case ISCSI_PARAM_ERL:
-		session->erl = value;
-		break;
 	case ISCSI_PARAM_IFMARKER_EN:
+		sscanf(buf, "%d", &value);
 		if (value) {
 			printk(KERN_ERR "IFMarker wasn't negotiated to No");
 			return -EPROTO;
 		}
 		break;
 	case ISCSI_PARAM_OFMARKER_EN:
+		sscanf(buf, "%d", &value);
 		if (value) {
 			printk(KERN_ERR "OFMarker wasn't negotiated to No");
 			return -EPROTO;
 		}
 		break;
 	default:
-		break;
-	}
-
-	return 0;
-}
-
-static int
-iscsi_iser_session_get_param(struct iscsi_cls_session *cls_session,
-			     enum iscsi_param param, uint32_t *value)
-{
-	struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
-	struct iscsi_session *session = iscsi_hostdata(shost->hostdata);
-
-	switch (param) {
-	case ISCSI_PARAM_INITIAL_R2T_EN:
-		*value = session->initial_r2t_en;
-		break;
-	case ISCSI_PARAM_MAX_R2T:
-		*value = session->max_r2t;
-		break;
-	case ISCSI_PARAM_IMM_DATA_EN:
-		*value = session->imm_data_en;
-		break;
-	case ISCSI_PARAM_FIRST_BURST:
-		*value = session->first_burst;
-		break;
-	case ISCSI_PARAM_MAX_BURST:
-		*value = session->max_burst;
-		break;
-	case ISCSI_PARAM_PDU_INORDER_EN:
-		*value = session->pdu_inorder_en;
-		break;
-	case ISCSI_PARAM_DATASEQ_INORDER_EN:
-		*value = session->dataseq_inorder_en;
-		break;
-	case ISCSI_PARAM_ERL:
-		*value = session->erl;
-		break;
-	case ISCSI_PARAM_IFMARKER_EN:
-		*value = 0;
-		break;
-	case ISCSI_PARAM_OFMARKER_EN:
-		*value = 0;
-		break;
-	default:
-		return ISCSI_ERR_PARAM_NOT_FOUND;
-	}
-
-	return 0;
-}
-
-static int
-iscsi_iser_conn_get_param(struct iscsi_cls_conn *cls_conn,
-			  enum iscsi_param param, uint32_t *value)
-{
-	struct iscsi_conn *conn = cls_conn->dd_data;
-
-	switch(param) {
-	case ISCSI_PARAM_MAX_RECV_DLENGTH:
-		*value = conn->max_recv_dlength;
-		break;
-	case ISCSI_PARAM_MAX_XMIT_DLENGTH:
-		*value = conn->max_xmit_dlength;
-		break;
-	case ISCSI_PARAM_HDRDGST_EN:
-		*value = 0;
-		break;
-	case ISCSI_PARAM_DATADGST_EN:
-		*value = 0;
-		break;
-	/*case ISCSI_PARAM_TARGET_RECV_DLENGTH:
-		*value = conn->target_recv_dlength;
-		break;
-	case ISCSI_PARAM_INITIATOR_RECV_DLENGTH:
-		*value = conn->initiator_recv_dlength;
-		break;*/
-	default:
-		return ISCSI_ERR_PARAM_NOT_FOUND;
+		return iscsi_set_param(cls_conn, param, buf, buflen);
 	}
 
 	return 0;
 }
 
-
 static void
 iscsi_iser_conn_get_stats(struct iscsi_cls_conn *cls_conn, struct iscsi_stats *stats)
 {
@@ -701,7 +592,12 @@ static struct iscsi_transport iscsi_iser_transport = {
 				  ISCSI_FIRST_BURST |
 				  ISCSI_MAX_BURST |
 				  ISCSI_PDU_INORDER_EN |
-				  ISCSI_DATASEQ_INORDER_EN,
+				  ISCSI_DATASEQ_INORDER_EN |
+				  ISCSI_EXP_STATSN |
+				  ISCSI_PERSISTENT_PORT |
+				  ISCSI_PERSISTENT_ADDRESS |
+				  ISCSI_TARGET_NAME |
+				  ISCSI_TPGT,
 	.host_template          = &iscsi_iser_sht,
 	.conndata_size		= sizeof(struct iscsi_conn),
 	.max_lun                = ISCSI_ISER_MAX_LUN,
@@ -713,9 +609,9 @@ static struct iscsi_transport iscsi_iser_transport = {
 	.create_conn            = iscsi_iser_conn_create,
 	.bind_conn              = iscsi_iser_conn_bind,
 	.destroy_conn           = iscsi_iser_conn_destroy,
-	.set_param              = iscsi_iser_conn_set_param,
-	.get_conn_param		= iscsi_iser_conn_get_param,
-	.get_session_param	= iscsi_iser_session_get_param,
+	.set_param              = iscsi_iser_set_param,
+	.get_conn_param		= iscsi_conn_get_param,
+	.get_session_param	= iscsi_session_get_param,
 	.start_conn             = iscsi_iser_conn_start,
 	.stop_conn              = iscsi_conn_stop,
 	/* these are called as part of conn recovery */
diff --git a/drivers/message/fusion/Makefile b/drivers/message/fusion/Makefile
index 51740b34622..b114236f439 100644
--- a/drivers/message/fusion/Makefile
+++ b/drivers/message/fusion/Makefile
@@ -33,6 +33,11 @@
 #  For mptfc:
 #CFLAGS_mptfc.o += -DMPT_DEBUG_FC
 
+#  For mptsas:
+#CFLAGS_mptsas.o += -DMPT_DEBUG_SAS
+#CFLAGS_mptsas.o += -DMPT_DEBUG_SAS_WIDE
+
+
 #=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-} LSI_LOGIC
 
 obj-$(CONFIG_FUSION_SPI)	+= mptbase.o mptscsih.o mptspi.o
diff --git a/drivers/message/fusion/lsi/fc_log.h b/drivers/message/fusion/lsi/fc_log.h
deleted file mode 100644
index dc98d46f907..00000000000
--- a/drivers/message/fusion/lsi/fc_log.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- *  Copyright (c) 2000-2001 LSI Logic Corporation. All rights reserved.
- *
- *  NAME:           fc_log.h
- *  SUMMARY:        MPI IocLogInfo definitions for the SYMFC9xx chips
- *  DESCRIPTION:    Contains the enumerated list of values that may be returned
- *                  in the IOCLogInfo field of a MPI Default Reply Message.
- *
- *  CREATION DATE:  6/02/2000
- *  ID:             $Id: fc_log.h,v 4.6 2001/07/26 14:41:33 sschremm Exp $
- */
-
-
-/*
- * MpiIocLogInfo_t enum
- *
- * These 32 bit values are used in the IOCLogInfo field of the MPI reply
- * messages.
- * The value is 0xabcccccc where
- *          a = The type of log info as per the MPI spec. Since these codes are
- *              all for Fibre Channel this value will always be 2.
- *          b = Specifies a subclass of the firmware where
- *                  0 = FCP Initiator
- *                  1 = FCP Target
- *                  2 = LAN
- *                  3 = MPI Message Layer
- *                  4 = FC Link
- *                  5 = Context Manager
- *                  6 = Invalid Field Offset
- *                  7 = State Change Info
- *                  all others are reserved for future use
- *          c = A specific value within the subclass.
- *
- * NOTE: Any new values should be added to the end of each subclass so that the
- *       codes remain consistent across firmware releases.
- */
-typedef enum _MpiIocLogInfoFc
-{
-    MPI_IOCLOGINFO_FC_INIT_BASE                     = 0x20000000,
-    MPI_IOCLOGINFO_FC_INIT_ERROR_OUT_OF_ORDER_FRAME = 0x20000001, /* received an out of order frame - unsupported */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primative */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME   = 0x20000003, /* Bad Rx Frame, bad end of frame primative */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_OVER_RUN           = 0x20000004, /* Bad Rx Frame, overrun */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OTHER           = 0x20000005, /* Other errors caught by IOC which require retries */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_SUBPROC_DEAD       = 0x20000006, /* Main processor could not initialize sub-processor */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OVERRUN         = 0x20000007, /* Scatter Gather overrun  */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_RX_BAD_STATUS      = 0x20000008, /* Receiver detected context mismatch via invalid header */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_RX_UNEXPECTED_FRAME= 0x20000009, /* CtxMgr detected unsupported frame type  */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_LINK_FAILURE       = 0x2000000A, /* Link failure occurred  */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_TX_TIMEOUT         = 0x2000000B, /* Transmitter timeout error */
-
-    MPI_IOCLOGINFO_FC_TARGET_BASE                   = 0x21000000,
-    MPI_IOCLOGINFO_FC_TARGET_NO_PDISC               = 0x21000001, /* not sent because we are waiting for a PDISC from the initiator */
-    MPI_IOCLOGINFO_FC_TARGET_NO_LOGIN               = 0x21000002, /* not sent because we are not logged in to the remote node */
-    MPI_IOCLOGINFO_FC_TARGET_DOAR_KILLED_BY_LIP     = 0x21000003, /* Data Out, Auto Response, not sent due to a LIP */
-    MPI_IOCLOGINFO_FC_TARGET_DIAR_KILLED_BY_LIP     = 0x21000004, /* Data In, Auto Response, not sent due to a LIP */
-    MPI_IOCLOGINFO_FC_TARGET_DIAR_MISSING_DATA      = 0x21000005, /* Data In, Auto Response, missing data frames */
-    MPI_IOCLOGINFO_FC_TARGET_DONR_KILLED_BY_LIP     = 0x21000006, /* Data Out, No Response, not sent due to a LIP */
-    MPI_IOCLOGINFO_FC_TARGET_WRSP_KILLED_BY_LIP     = 0x21000007, /* Auto-response after a write not sent due to a LIP */
-    MPI_IOCLOGINFO_FC_TARGET_DINR_KILLED_BY_LIP     = 0x21000008, /* Data In, No Response, not completed due to a LIP */
-    MPI_IOCLOGINFO_FC_TARGET_DINR_MISSING_DATA      = 0x21000009, /* Data In, No Response, missing data frames */
-    MPI_IOCLOGINFO_FC_TARGET_MRSP_KILLED_BY_LIP     = 0x2100000a, /* Manual Response not sent due to a LIP */
-    MPI_IOCLOGINFO_FC_TARGET_NO_CLASS_3             = 0x2100000b, /* not sent because remote node does not support Class 3 */
-    MPI_IOCLOGINFO_FC_TARGET_LOGIN_NOT_VALID        = 0x2100000c, /* not sent because login to remote node not validated */
-    MPI_IOCLOGINFO_FC_TARGET_FROM_OUTBOUND          = 0x2100000e, /* cleared from the outbound queue after a logout */
-    MPI_IOCLOGINFO_FC_TARGET_WAITING_FOR_DATA_IN    = 0x2100000f, /* cleared waiting for data after a logout */
-
-    MPI_IOCLOGINFO_FC_LAN_BASE                      = 0x22000000,
-    MPI_IOCLOGINFO_FC_LAN_TRANS_SGL_MISSING         = 0x22000001, /* Transaction Context Sgl Missing */
-    MPI_IOCLOGINFO_FC_LAN_TRANS_WRONG_PLACE         = 0x22000002, /* Transaction Context found before an EOB */
-    MPI_IOCLOGINFO_FC_LAN_TRANS_RES_BITS_SET        = 0x22000003, /* Transaction Context value has reserved bits set */
-    MPI_IOCLOGINFO_FC_LAN_WRONG_SGL_FLAG            = 0x22000004, /* Invalid SGL Flags */
-
-    MPI_IOCLOGINFO_FC_MSG_BASE                      = 0x23000000,
-
-    MPI_IOCLOGINFO_FC_LINK_BASE                     = 0x24000000,
-    MPI_IOCLOGINFO_FC_LINK_LOOP_INIT_TIMEOUT        = 0x24000001, /* Loop initialization timed out */
-    MPI_IOCLOGINFO_FC_LINK_ALREADY_INITIALIZED      = 0x24000002, /* Another system controller already initialized the loop */
-    MPI_IOCLOGINFO_FC_LINK_LINK_NOT_ESTABLISHED     = 0x24000003, /* Not synchronized to signal or still negotiating (possible cable problem) */
-    MPI_IOCLOGINFO_FC_LINK_CRC_ERROR                = 0x24000004, /* CRC check detected error on received frame */
-
-    MPI_IOCLOGINFO_FC_CTX_BASE                      = 0x25000000,
-
-    MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET     = 0x26000000, /* The lower 24 bits give the byte offset of the field in the request message that is invalid */
-    MPI_IOCLOGINFO_FC_INVALID_FIELD_MAX_OFFSET      = 0x26ffffff,
-
-    MPI_IOCLOGINFO_FC_STATE_CHANGE                  = 0x27000000  /* The lower 24 bits give additional information concerning state change */
-
-} MpiIocLogInfoFc_t;
diff --git a/drivers/message/fusion/lsi/mpi.h b/drivers/message/fusion/lsi/mpi.h
index 02cdc840a06..81ad77622da 100644
--- a/drivers/message/fusion/lsi/mpi.h
+++ b/drivers/message/fusion/lsi/mpi.h
@@ -6,7 +6,7 @@
  *          Title:  MPI Message independent structures and definitions
  *  Creation Date:  July 27, 2000
  *
- *    mpi.h Version:  01.05.10
+ *    mpi.h Version:  01.05.11
  *
  *  Version History
  *  ---------------
@@ -76,6 +76,7 @@
  *                      Added EEDP IOCStatus codes.
  *  08-03-05  01.05.09  Bumped MPI_HEADER_VERSION_UNIT.
  *  08-30-05  01.05.10  Added 2 new IOCStatus codes for Target.
+ *  03-27-06  01.05.11  Bumped MPI_HEADER_VERSION_UNIT.
  *  --------------------------------------------------------------------------
  */
 
@@ -106,7 +107,7 @@
 /* Note: The major versions of 0xe0 through 0xff are reserved */
 
 /* versioning for this MPI header set */
-#define MPI_HEADER_VERSION_UNIT             (0x0C)
+#define MPI_HEADER_VERSION_UNIT             (0x0D)
 #define MPI_HEADER_VERSION_DEV              (0x00)
 #define MPI_HEADER_VERSION_UNIT_MASK        (0xFF00)
 #define MPI_HEADER_VERSION_UNIT_SHIFT       (8)
diff --git a/drivers/message/fusion/lsi/mpi_cnfg.h b/drivers/message/fusion/lsi/mpi_cnfg.h
index b1becec27e1..47e13e360c1 100644
--- a/drivers/message/fusion/lsi/mpi_cnfg.h
+++ b/drivers/message/fusion/lsi/mpi_cnfg.h
@@ -6,7 +6,7 @@
  *          Title:  MPI Config message, structures, and Pages
  *  Creation Date:  July 27, 2000
  *
- *    mpi_cnfg.h Version:  01.05.11
+ *    mpi_cnfg.h Version:  01.05.12
  *
  *  Version History
  *  ---------------
@@ -266,6 +266,16 @@
  *                      Added postpone SATA Init bit to SAS IO Unit Page 1
  *                      ControlFlags.
  *                      Changed LogEntry format for Log Page 0.
+ *  03-27-06  01.05.12  Added two new Flags defines for Manufacturing Page 4.
+ *                      Added Manufacturing Page 7.
+ *                      Added MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING.
+ *                      Added IOC Page 6.
+ *                      Added PrevBootDeviceForm field to CONFIG_PAGE_BIOS_2.
+ *                      Added MaxLBAHigh field to RAID Volume Page 0.
+ *                      Added Nvdata version fields to SAS IO Unit Page 0.
+ *                      Added AdditionalControlFlags, MaxTargetPortConnectTime,
+ *                      ReportDeviceMissingDelay, and IODeviceMissingDelay
+ *                      fields to SAS IO Unit Page 1.
  *  --------------------------------------------------------------------------
  */
 
@@ -631,9 +641,11 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_4
 } CONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4,
   ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t;
 
-#define MPI_MANUFACTURING4_PAGEVERSION                  (0x03)
+#define MPI_MANUFACTURING4_PAGEVERSION                  (0x04)
 
 /* defines for the Flags field */
+#define MPI_MANPAGE4_FORCE_BAD_BLOCK_TABLE              (0x80)
+#define MPI_MANPAGE4_FORCE_OFFLINE_FAILOVER             (0x40)
 #define MPI_MANPAGE4_IME_DISABLE                        (0x20)
 #define MPI_MANPAGE4_IM_DISABLE                         (0x10)
 #define MPI_MANPAGE4_IS_DISABLE                         (0x08)
@@ -668,6 +680,66 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_6
 #define MPI_MANUFACTURING6_PAGEVERSION                  (0x00)
 
 
+typedef struct _MPI_MANPAGE7_CONNECTOR_INFO
+{
+    U32                         Pinout;                 /* 00h */
+    U8                          Connector[16];          /* 04h */
+    U8                          Location;               /* 14h */
+    U8                          Reserved1;              /* 15h */
+    U16                         Slot;                   /* 16h */
+    U32                         Reserved2;              /* 18h */
+} MPI_MANPAGE7_CONNECTOR_INFO, MPI_POINTER PTR_MPI_MANPAGE7_CONNECTOR_INFO,
+  MpiManPage7ConnectorInfo_t, MPI_POINTER pMpiManPage7ConnectorInfo_t;
+
+/* defines for the Pinout field */
+#define MPI_MANPAGE7_PINOUT_SFF_8484_L4                 (0x00080000)
+#define MPI_MANPAGE7_PINOUT_SFF_8484_L3                 (0x00040000)
+#define MPI_MANPAGE7_PINOUT_SFF_8484_L2                 (0x00020000)
+#define MPI_MANPAGE7_PINOUT_SFF_8484_L1                 (0x00010000)
+#define MPI_MANPAGE7_PINOUT_SFF_8470_L4                 (0x00000800)
+#define MPI_MANPAGE7_PINOUT_SFF_8470_L3                 (0x00000400)
+#define MPI_MANPAGE7_PINOUT_SFF_8470_L2                 (0x00000200)
+#define MPI_MANPAGE7_PINOUT_SFF_8470_L1                 (0x00000100)
+#define MPI_MANPAGE7_PINOUT_SFF_8482                    (0x00000002)
+#define MPI_MANPAGE7_PINOUT_CONNECTION_UNKNOWN          (0x00000001)
+
+/* defines for the Location field */
+#define MPI_MANPAGE7_LOCATION_UNKNOWN                   (0x01)
+#define MPI_MANPAGE7_LOCATION_INTERNAL                  (0x02)
+#define MPI_MANPAGE7_LOCATION_EXTERNAL                  (0x04)
+#define MPI_MANPAGE7_LOCATION_SWITCHABLE                (0x08)
+#define MPI_MANPAGE7_LOCATION_AUTO                      (0x10)
+#define MPI_MANPAGE7_LOCATION_NOT_PRESENT               (0x20)
+#define MPI_MANPAGE7_LOCATION_NOT_CONNECTED             (0x80)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check NumPhys at runtime.
+ */
+#ifndef MPI_MANPAGE7_CONNECTOR_INFO_MAX
+#define MPI_MANPAGE7_CONNECTOR_INFO_MAX   (1)
+#endif
+
+typedef struct _CONFIG_PAGE_MANUFACTURING_7
+{
+    CONFIG_PAGE_HEADER          Header;                 /* 00h */
+    U32                         Reserved1;              /* 04h */
+    U32                         Reserved2;              /* 08h */
+    U32                         Flags;                  /* 0Ch */
+    U8                          EnclosureName[16];      /* 10h */
+    U8                          NumPhys;                /* 20h */
+    U8                          Reserved3;              /* 21h */
+    U16                         Reserved4;              /* 22h */
+    MPI_MANPAGE7_CONNECTOR_INFO ConnectorInfo[MPI_MANPAGE7_CONNECTOR_INFO_MAX]; /* 24h */
+} CONFIG_PAGE_MANUFACTURING_7, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_7,
+  ManufacturingPage7_t, MPI_POINTER pManufacturingPage7_t;
+
+#define MPI_MANUFACTURING7_PAGEVERSION                  (0x00)
+
+/* defines for the Flags field */
+#define MPI_MANPAGE7_FLAG_USE_SLOT_INFO                 (0x00000001)
+
+
 /****************************************************************************
 *   IO Unit Config Pages
 ****************************************************************************/
@@ -867,7 +939,7 @@ typedef struct _CONFIG_PAGE_IOC_2
 } CONFIG_PAGE_IOC_2, MPI_POINTER PTR_CONFIG_PAGE_IOC_2,
   IOCPage2_t, MPI_POINTER pIOCPage2_t;
 
-#define MPI_IOCPAGE2_PAGEVERSION                        (0x03)