Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (40 commits)
  regulator: set constraints.apply_uV to 0 in of_get_fixed_voltage_config
  regulator: max8925: fix enabled/disabled judgement mistake
  regulator: add regulator_bulk_force_disable function
  regulator: pass regulator_register of_node in fixed voltage driver
  regulator: add regulator_force_disable() definition for !CONFIG_REGULATOR
  regulator: Enable supply regulator if child rail is enabled.
  regulator: mc13892: Convert to devm_kzalloc()
  regulator: mc13783: Convert to devm_kzalloc()
  regulator: Fix checking return value of create_regulator
  regulator: Fix the error handling if create_regulator fails
  regulator: Export regulator_is_supported_voltage()
  regulator: mc13892: add device tree probe support
  regulator: mc13892: remove the unnecessary prefix from regulator name
  regulator: Convert wm831x regulator drivers to devm_kzalloc()
  regulator: da9052: Staticize non-exported symbols
  regulator: Replace kzalloc with devm_kzalloc and if-else with a switch-case for da9052-regulator
  regulator: Update da9052-regulator for DT changes
  regulator: DA9052/53 Regulator support
  regulator: pass device_node to of_get_regulator_init_data()
  regulator: If a single voltage is set with device tree then set apply_uV
  ...

48 files changed, 1215 insertions, 337 deletions

diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c
index ca0d608f824..df33530cec4 100644
--- a/drivers/regulator/88pm8607.c
+++ b/drivers/regulator/88pm8607.c
@@ -427,7 +427,7 @@ static int __devinit pm8607_regulator_probe(struct platform_device *pdev)
 
 	/* replace driver_data with info */
 	info->regulator = regulator_register(&info->desc, &pdev->dev,
-					     pdata, info);
+					     pdata, info, NULL);
 	if (IS_ERR(info->regulator)) {
 		dev_err(&pdev->dev, "failed to register regulator %s\n",
 			info->desc.name);
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 9713b1b860c..7a61b17ddd0 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -93,6 +93,7 @@ config REGULATOR_MAX1586
 config REGULATOR_MAX8649
 	tristate "Maxim 8649 voltage regulator"
 	depends on I2C
+	select REGMAP_I2C
 	help
 	  This driver controls a Maxim 8649 voltage output regulator via
 	  I2C bus.
@@ -177,6 +178,13 @@ config REGULATOR_DA903X
 	  Say y here to support the BUCKs and LDOs regulators found on
 	  Dialog Semiconductor DA9030/DA9034 PMIC.
 
+config REGULATOR_DA9052
+	tristate "Dialog DA9052/DA9053 regulators"
+	depends on PMIC_DA9052
+	help
+	  This driver supports the voltage regulators of DA9052-BC and
+	  DA9053-AA/Bx PMIC.
+
 config REGULATOR_PCF50633
 	tristate "PCF50633 regulator driver"
         depends on MFD_PCF50633
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 93a6318f532..503bac87715 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -4,6 +4,7 @@
 
 
 obj-$(CONFIG_REGULATOR) += core.o dummy.o
+obj-$(CONFIG_OF) += of_regulator.o
 obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
 obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
 obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
@@ -29,6 +30,7 @@ obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
 obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o
 obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o
 obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
+obj-$(CONFIG_REGULATOR_DA9052)	+= da9052-regulator.o
 obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
 obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
 obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
diff --git a/drivers/regulator/aat2870-regulator.c b/drivers/regulator/aat2870-regulator.c
index 298c6c6a279..685ad43b074 100644
--- a/drivers/regulator/aat2870-regulator.c
+++ b/drivers/regulator/aat2870-regulator.c
@@ -63,7 +63,7 @@ static int aat2870_ldo_set_voltage_sel(struct regulator_dev *rdev,
 	struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
 
 	return aat2870->update(aat2870, ri->voltage_addr, ri->voltage_mask,
-			(selector << ri->voltage_shift) & ri->voltage_mask);
+			       selector << ri->voltage_shift);
 }
 
 static int aat2870_ldo_get_voltage_sel(struct regulator_dev *rdev)
@@ -188,7 +188,7 @@ static int aat2870_regulator_probe(struct platform_device *pdev)
 	ri->pdev = pdev;
 
 	rdev = regulator_register(&ri->desc, &pdev->dev,
-				  pdev->dev.platform_data, ri);
+				  pdev->dev.platform_data, ri, NULL);
 	if (IS_ERR(rdev)) {
 		dev_err(&pdev->dev, "Failed to register regulator %s\n",
 			ri->desc.name);
diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c
index 585e4946fe0..042271aace6 100644
--- a/drivers/regulator/ab3100.c
+++ b/drivers/regulator/ab3100.c
@@ -634,7 +634,7 @@ static int __devinit ab3100_regulators_probe(struct platform_device *pdev)
 		rdev = regulator_register(&ab3100_regulator_desc[i],
 					  &pdev->dev,
 					  &plfdata->reg_constraints[i],
-					  reg);
+					  reg, NULL);
 
 		if (IS_ERR(rdev)) {
 			err = PTR_ERR(rdev);
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 6e1ae69646b..e91b8ddc279 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -822,7 +822,7 @@ static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
 
 		/* register regulator with framework */
 		info->regulator = regulator_register(&info->desc, &pdev->dev,
-				&pdata->regulator[i], info);
+				&pdata->regulator[i], info, NULL);
 		if (IS_ERR(info->regulator)) {
 			err = PTR_ERR(info->regulator);
 			dev_err(&pdev->dev, "failed to register regulator %s\n",
diff --git a/drivers/regulator/ad5398.c b/drivers/regulator/ad5398.c
index a4be41614ee..483c8093085 100644
--- a/drivers/regulator/ad5398.c
+++ b/drivers/regulator/ad5398.c
@@ -233,7 +233,7 @@ static int __devinit ad5398_probe(struct i2c_client *client,
 	chip->current_mask = (chip->current_level - 1) << chip->current_offset;
 
 	chip->rdev = regulator_register(&ad5398_reg, &client->dev,
-					init_data, chip);
+					init_data, chip, NULL);
 	if (IS_ERR(chip->rdev)) {
 		ret = PTR_ERR(chip->rdev);
 		dev_err(&client->dev, "failed to register %s %s\n",
diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c
index e24d1b7d97a..9fab6d1bbe8 100644
--- a/drivers/regulator/bq24022.c
+++ b/drivers/regulator/bq24022.c
@@ -107,7 +107,7 @@ static int __init bq24022_probe(struct platform_device *pdev)
 	ret = gpio_direction_output(pdata->gpio_nce, 1);
 
 	bq24022 = regulator_register(&bq24022_desc, &pdev->dev,
-				     pdata->init_data, pdata);
+				     pdata->init_data, pdata, NULL);
 	if (IS_ERR(bq24022)) {
 		dev_dbg(&pdev->dev, "couldn't register regulator\n");
 		ret = PTR_ERR(bq24022);
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 938398f3e86..ca86f39a0fd 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -25,6 +25,8 @@
 #include <linux/mutex.h>
 #include <linux/suspend.h>
 #include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/regulator/of_regulator.h>
 #include <linux/regulator/consumer.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
@@ -132,6 +134,33 @@ static struct regulator *get_device_regulator(struct device *dev)
 	return NULL;
 }
 
+/**
+ * of_get_regulator - get a regulator device node based on supply name
+ * @dev: Device pointer for the consumer (of regulator) device
+ * @supply: regulator supply name
+ *
+ * Extract the regulator device node corresponding to the supply name.
+ * retruns the device node corresponding to the regulator if found, else
+ * returns NULL.
+ */
+static struct device_node *of_get_regulator(struct device *dev, const char *supply)
+{
+	struct device_node *regnode = NULL;
+	char prop_name[32]; /* 32 is max size of property name */
+
+	dev_dbg(dev, "Looking up %s-supply from device tree\n", supply);
+
+	snprintf(prop_name, 32, "%s-supply", supply);
+	regnode = of_parse_phandle(dev->of_node, prop_name, 0);
+
+	if (!regnode) {
+		dev_warn(dev, "%s property in node %s references invalid phandle",
+				prop_name, dev->of_node->full_name);
+		return NULL;
+	}
+	return regnode;
+}
+
 /* Platform voltage constraint check */
 static int regulator_check_voltage(struct regulator_dev *rdev,
 				   int *min_uV, int *max_uV)
@@ -883,8 +912,12 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 	int ret = 0;
 	struct regulator_ops *ops = rdev->desc->ops;
 
-	rdev->constraints = kmemdup(constraints, sizeof(*constraints),
-				    GFP_KERNEL);
+	if (constraints)
+		rdev->constraints = kmemdup(constraints, sizeof(*constraints),
+					    GFP_KERNEL);
+	else
+		rdev->constraints = kzalloc(sizeof(*constraints),
+					    GFP_KERNEL);
 	if (!rdev->constraints)
 		return -ENOMEM;
 
@@ -893,7 +926,7 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		goto out;
 
 	/* do we need to setup our suspend state */
-	if (constraints->initial_state) {
+	if (rdev->constraints->initial_state) {
 		ret = suspend_prepare(rdev, rdev->constraints->initial_state);
 		if (ret < 0) {
 			rdev_err(rdev, "failed to set suspend state\n");
@@ -901,7 +934,7 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		}
 	}
 
-	if (constraints->initial_mode) {
+	if (rdev->constraints->initial_mode) {
 		if (!ops->set_mode) {
 			rdev_err(rdev, "no set_mode operation\n");
 			ret = -EINVAL;
@@ -952,9 +985,8 @@ static int set_supply(struct regulator_dev *rdev,
 	rdev_info(rdev, "supplied by %s\n", rdev_get_name(supply_rdev));
 
 	rdev->supply = create_regulator(supply_rdev, &rdev->dev, "SUPPLY");
-	if (IS_ERR(rdev->supply)) {
-		err = PTR_ERR(rdev->supply);
-		rdev->supply = NULL;
+	if (rdev->supply == NULL) {
+		err = -ENOMEM;
 		return err;
 	}
 
@@ -1148,6 +1180,30 @@ static int _regulator_get_enable_time(struct regulator_dev *rdev)
 	return rdev->desc->ops->enable_time(rdev);
 }
 
+static struct regulator_dev *regulator_dev_lookup(struct device *dev,
+							 const char *supply)
+{
+	struct regulator_dev *r;
+	struct device_node *node;
+
+	/* first do a dt based lookup */
+	if (dev && dev->of_node) {
+		node = of_get_regulator(dev, supply);
+		if (node)
+			list_for_each_entry(r, &regulator_list, list)
+				if (r->dev.parent &&
+					node == r->dev.of_node)
+					return r;
+	}
+
+	/* if not found, try doing it non-dt way */
+	list_for_each_entry(r, &regulator_list, list)
+		if (strcmp(rdev_get_name(r), supply) == 0)
+			return r;
+
+	return NULL;
+}
+
 /* Internal regulator request function */
 static struct regulator *_regulator_get(struct device *dev, const char *id,
 					int exclusive)
@@ -1168,6 +1224,10 @@ static struct regulator *_regulator_get(struct device *dev, const char *id,
 
 	mutex_lock(&regulator_list_mutex);
 
+	rdev = regulator_dev_lookup(dev, id);
+	if (rdev)
+		goto found;
+
 	list_for_each_entry(map, &regulator_map_list, list) {
 		/* If the mapping has a device set up it must match */
 		if (map->dev_name &&
@@ -1221,6 +1281,7 @@ found:
 	if (regulator == NULL) {
 		regulator = ERR_PTR(-ENOMEM);
 		module_put(rdev->owner);
+		goto out;
 	}
 
 	rdev->open_count++;
@@ -1726,6 +1787,7 @@ int regulator_is_supported_voltage(struct regulator *regulator,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(regulator_is_supported_voltage);
 
 static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 				     int min_uV, int max_uV)
@@ -2429,6 +2491,43 @@ err:
 EXPORT_SYMBOL_GPL(regulator_bulk_disable);
 
 /**
+ * regulator_bulk_force_disable - force disable multiple regulator consumers
+ *
+ * @num_consumers: Number of consumers
+ * @consumers:     Consumer data; clients are stored here.
+ * @return         0 on success, an errno on failure
+ *
+ * This convenience API allows consumers to forcibly disable multiple regulator
+ * clients in a single API call.
+ * NOTE: This should be used for situations when device damage will
+ * likely occur if the regulators are not disabled (e.g. over temp).
+ * Although regulator_force_disable function call for some consumers can
+ * return error numbers, the function is called for all consumers.
+ */
+int regulator_bulk_force_disable(int num_consumers,
+			   struct regulator_bulk_data *consumers)
+{
+	int i;
+	int ret;
+
+	for (i = 0; i < num_consumers; i++)
+		consumers[i].ret =
+			    regulator_force_disable(consumers[i].consumer);
+
+	for (i = 0; i < num_consumers; i++) {
+		if (consumers[i].ret != 0) {
+			ret = consumers[i].ret;
+			goto out;
+		}
+	}
+
+	return 0;
+out:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_bulk_force_disable);
+
+/**
  * regulator_bulk_free - free multiple regulator consumers
  *
  * @num_consumers: Number of consumers
@@ -2503,7 +2602,8 @@ static int add_regulator_attributes(struct regulator_dev *rdev)
 	int			status = 0;
 
 	/* some attributes need specific methods to be displayed */
-	if (ops->get_voltage || ops->get_voltage_sel) {
+	if ((ops->get_voltage && ops->get_voltage(rdev) >= 0) ||
+	    (ops->get_voltage_sel && ops->get_voltage_sel(rdev) >= 0)) {
 		status = device_create_file(dev, &dev_attr_microvolts);
 		if (status < 0)
 			return status;
@@ -2637,11 +2737,13 @@ static void rdev_init_debugfs(struct regulator_dev *rdev)
  */
 struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
 	struct device *dev, const struct regulator_init_data *init_data,
-	void *driver_data)
+	void *driver_data, struct device_node *of_node)
 {
+	const struct regulation_constraints *constraints = NULL;
 	static atomic_t regulator_no = ATOMIC_INIT(0);
 	struct regulator_dev *rdev;
 	int ret, i;
+	const char *supply = NULL;
 
 	if (regulator_desc == NULL)
 		return ERR_PTR(-EINVAL);
@@ -2653,9 +2755,6 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
 	    regulator_desc->type != REGULATOR_CURRENT)
 		return ERR_PTR(-EINVAL);
 
-	if (!init_data)
-		return ERR_PTR(-EINVAL);
-
 	/* Only one of each should be implemented */
 	WARN_ON(regulator_desc->ops->get_voltage &&
 		regulator_desc->ops->get_voltage_sel);
@@ -2688,7 +2787,7 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
 	INIT_DELAYED_WORK(&rdev->disable_work, regulator_disable_work);
 
 	/* preform any regulator specific init */
-	if (init_data->regulator_init) {
+	if (init_data && init_data->regulator_init) {
 		ret = init_data->regulator_init(rdev->reg_data);
 		if (ret < 0)
 			goto clean;
@@ -2696,6 +2795,7 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
 
 	/* register with sysfs */
 	rdev->dev.class = &regulator_class;
+	rdev->dev.of_node = of_node;
 	rdev->dev.parent = dev;
 	dev_set_name(&rdev->dev, "regulator.%d",
 		     atomic_inc_return(&regulator_no) - 1);
@@ -2708,7 +2808,10 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
 	dev_set_drvdata(&rdev->dev, rdev);
 
 	/* set regulator constraints */
-	ret = set_machine_constraints(rdev, &init_data->constraints);
+	if (init_data)
+		constraints = &init_data->constraints;
+
+	ret = set_machine_constraints(rdev, constraints);
 	if (ret < 0)
 		goto scrub;
 
@@ -2717,21 +2820,18 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
 	if (ret < 0)
 		goto scrub;
 
-	if (init_data->supply_regulator) {
+	if (init_data && init_data->supply_regulator)
+		supply = init_data->supply_regulator;
+	else if (regulator_desc->supply_name)
+		supply = regulator_desc->supply_name;
+
+	if (supply) {
 		struct regulator_dev *r;
-		int found = 0;
 
-		list_for_each_entry(r, &regulator_list, list) {
-			if (strcmp(rdev_get_name(r),
-				   init_data->supply_regulator) == 0) {
-				found = 1;
-				break;
-			}
-		}
+		r = regulator_dev_lookup(dev, supply);
 
-		if (!found) {
-			dev_err(dev, "Failed to find supply %s\n",
-				init_data->supply_regulator);
+		if (!r) {
+			dev_err(dev, "Failed to find supply %s\n", supply);
 			ret = -ENODEV;
 			goto scrub;
 		}
@@ -2739,18 +2839,28 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
 		ret = set_supply(rdev, r);
 		if (ret < 0)
 			goto scrub;
+
+		/* Enable supply if rail is enabled */
+		if (rdev->desc->ops->is_enabled &&
+				rdev->desc->ops->is_enabled(rdev)) {
+			ret = regulator_enable(rdev->supply);
+			if (ret < 0)
+				goto scrub;
+		}
 	}
 
 	/* add consumers devices */
-	for (i = 0; i < init_data->num_consumer_supplies; i++) {
-		ret = set_consumer_device_supply(rdev,
-			init_data->consumer_supplies[i].dev,
-			init_data->consumer_supplies[i].dev_name,
-			init_data->consumer_supplies[i].supply);
-		if (ret < 0) {
-			dev_err(dev, "Failed to set supply %s\n",
+	if (init_data) {
+		for (i = 0; i < init_data->num_consumer_supplies; i++) {
+			ret = set_consumer_device_supply(rdev,
+				init_data->consumer_supplies[i].dev,
+				init_data->consumer_supplies[i].dev_name,
 				init_data->consumer_supplies[i].supply);
-			goto unset_supplies;
+			if (ret < 0) {
+				dev_err(dev, "Failed to set supply %s\n",
+					init_data->consumer_supplies[i].supply);
+				goto unset_supplies;
+			}
 		}
 	}
 
diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c
index e23ddfa8b2c..8dbc54da7d7 100644
--- a/drivers/regulator/da903x.c
+++ b/drivers/regulator/da903x.c
@@ -537,7 +537,7 @@ static int __devinit da903x_regulator_probe(struct platform_device *pdev)
 		ri->desc.ops = &da9030_regulator_ldo1_15_ops;
 
 	rdev = regulator_register(&ri->desc, &pdev->dev,
-				  pdev->dev.platform_data, ri);
+				  pdev->dev.platform_data, ri, NULL);
 	if (IS_ERR(rdev)) {
 		dev_err(&pdev->dev, "failed to register regulator %s\n",
 				ri->desc.name);
diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c
new file mode 100644
index 00000000000..3767364452f
--- /dev/null
+++ b/drivers/regulator/da9052-regulator.c
@@ -0,0 +1,606 @@
+/*
+* da9052-regulator.c: Regulator driver for DA9052
+*
+* Copyright(c) 2011 Dialog Semiconductor Ltd.
+*
+* Author: David Dajun Chen <dchen@diasemi.com>
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License, or
+* (at your option) any later version.
+*
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+#include <linux/mfd/da9052/da9052.h>
+#include <linux/mfd/da9052/reg.h>
+#include <linux/mfd/da9052/pdata.h>
+
+/* Buck step size */
+#define DA9052_BUCK_PERI_3uV_STEP		100000
+#define DA9052_BUCK_PERI_REG_MAP_UPTO_3uV	24
+#define DA9052_CONST_3uV			3000000
+
+#define DA9052_MIN_UA		0
+#define DA9052_MAX_UA		3
+#define DA9052_CURRENT_RANGE	4
+
+/* Bit masks */
+#define DA9052_BUCK_ILIM_MASK_EVEN	0x0c
+#define DA9052_BUCK_ILIM_MASK_ODD	0xc0
+
+static const u32 da9052_current_limits[3][4] = {
+	{700000, 800000, 1000000, 1200000},	/* DA9052-BC BUCKs */
+	{1600000, 2000000, 2400000, 3000000},	/* DA9053-AA/Bx BUCK-CORE */
+	{800000, 1000000, 1200000, 1500000},	/* DA9053-AA/Bx BUCK-PRO,
+						 * BUCK-MEM and BUCK-PERI
+						*/
+};
+
+struct da9052_regulator_info {
+	struct regulator_desc reg_desc;
+	int step_uV;
+	int min_uV;
+	int max_uV;
+	unsigned char volt_shift;
+	unsigned char en_bit;
+	unsigned char activate_bit;
+};
+
+struct da9052_regulator {
+	struct da9052 *da9052;
+	struct da9052_regulator_info *info;
+	struct regulator_dev *rdev;
+};
+
+static int verify_range(struct da9052_regulator_info *info,
+			 int min_uV, int max_uV)
+{
+	if (min_uV > info->max_uV || max_uV < info->min_uV)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int da9052_regulator_enable(struct regulator_dev *rdev)
+{
+	struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9052_regulator_info *info = regulator->info;
+	int offset = rdev_get_id(rdev);
+
+	return da9052_reg_update(regulator->da9052,
+				 DA9052_BUCKCORE_REG + offset,
+				 1 << info->en_bit, 1 << info->en_bit);
+}
+
+static int da9052_regulator_disable(struct regulator_dev *rdev)
+{
+	struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9052_regulator_info *info = regulator->info;
+	int offset = rdev_get_id(rdev);
+
+	return da9052_reg_update(regulator->da9052,
+				 DA9052_BUCKCORE_REG + offset,
+				 1 << info->en_bit, 0);
+}
+
+static int da9052_regulator_is_enabled(struct regulator_dev *rdev)
+{
+	struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9052_regulator_info *info = regulator->info;
+	int offset = rdev_get_id(rdev);
+	int ret;
+
+	ret = da9052_reg_read(regulator->da9052, DA9052_BUCKCORE_REG + offset);
+	if (ret < 0)
+		return ret;
+
+	return ret & (1 << info->en_bit);
+}
+
+static int da9052_dcdc_get_current_limit(struct regulator_dev *rdev)
+{
+	struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
+	int offset = rdev_get_id(rdev);
+	int ret, row = 2;
+
+	ret = da9052_reg_read(regulator->da9052, DA9052_BUCKA_REG + offset/2);
+	if (ret < 0)
+		return ret;
+
+	/* Determine the even or odd position of the buck current limit
+	 * register field
+	*/
+	if (offset % 2 == 0)
+		ret = (ret & DA9052_BUCK_ILIM_MASK_EVEN) >> 2;
+	else
+		ret = (ret & DA9052_BUCK_ILIM_MASK_ODD) >> 6;
+
+	/* Select the appropriate current limit range */
+	if (regulator->da9052->chip_id == DA9052)
+		row = 0;
+	else if (offset == 0)
+		row = 1;
+
+	return da9052_current_limits[row][ret];
+}
+
+static int da9052_dcdc_set_current_limit(struct regulator_dev *rdev, int min_uA,
+					  int max_uA)
+{
+	struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
+	int offset = rdev_get_id(rdev);
+	int reg_val = 0;
+	int i, row = 2;
+
+	/* Select the appropriate current limit range */
+	if (regulator->da9052->chip_id == DA9052)<