diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2008-10-15 08:07:35 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2008-10-15 08:07:35 -0700 |
commit | 5f2434a66dfa4701b81b79a78eaf9c32da0f8839 (patch) | |
tree | 8c38f1fb0d0fbcd15e496df89be00ad8c4918a43 /drivers | |
parent | 278429cff8809958d25415ba0ed32b59866ab1a8 (diff) | |
parent | 6dc6472581f693b5fc95aebedf67b4960fb85cf0 (diff) |
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (158 commits)
powerpc: Fix CHRP PCI config access for indirect_pci
powerpc/chrp: Fix detection of Python PCI host bridge on IBM CHRPs
powerpc: Fix 32-bit SMP boot on CHRP
powerpc: Fix link errors on 32-bit machines using legacy DMA
powerpc/pci: Improve detection of unassigned bridge resources
hvc_console: Fix free_irq in spinlocked section
powerpc: Get USE_STRICT_MM_TYPECHECKS working again
powerpc: Reflect the used arguments in machine_init() prototype
powerpc: Fix DMA offset for non-coherent DMA
powerpc: fix fsl_upm nand driver modular build
powerpc/83xx: add NAND support for the MPC8360E-RDK boards
powerpc: FPGA support for GE Fanuc SBC610
i2c: MPC8349E-mITX Power Management and GPIO expander driver
powerpc: reserve two DMA channels for audio in MPC8610 HPCD device tree
powerpc: document the "fsl,ssi-dma-channel" compatible property
powerpc: disable CHRP and PMAC support in various defconfigs
OF: add fsl,mcu-mpc8349emitx to the exception list
powerpc/83xx: add DS1374 RTC support for the MPC837xE-MDS boards
powerpc: remove support for bootmem-allocated memory for the DIU driver
powerpc: remove non-dependent load fsl_booke PTE_64BIT
...
Diffstat (limited to 'drivers')
31 files changed, 610 insertions, 346 deletions
diff --git a/drivers/ata/pata_of_platform.c b/drivers/ata/pata_of_platform.c index 408da30594c..1f18ad9e4fe 100644 --- a/drivers/ata/pata_of_platform.c +++ b/drivers/ata/pata_of_platform.c @@ -52,7 +52,7 @@ static int __devinit pata_of_platform_probe(struct of_device *ofdev, ret = of_irq_to_resource(dn, 0, &irq_res); if (ret == NO_IRQ) - irq_res.start = irq_res.end = -1; + irq_res.start = irq_res.end = 0; else irq_res.flags = 0; diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index cf64ddf5d83..2cea27aba9a 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4172,7 +4172,7 @@ static int __init floppy_init(void) int i, unit, drive; int err, dr; -#if defined(CONFIG_PPC_MERGE) +#if defined(CONFIG_PPC) if (check_legacy_ioport(FDC1)) return -ENODEV; #endif diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c index f1c8feb5510..1730d29e604 100644 --- a/drivers/block/viodasd.c +++ b/drivers/block/viodasd.c @@ -249,7 +249,6 @@ static int send_request(struct request *req) struct HvLpEvent *hev; struct scatterlist sg[VIOMAXBLOCKDMA]; int sgindex; - int statindex; struct viodasd_device *d; unsigned long flags; @@ -258,11 +257,9 @@ static int send_request(struct request *req) if (rq_data_dir(req) == READ) { direction = DMA_FROM_DEVICE; viocmd = viomajorsubtype_blockio | vioblockread; - statindex = 0; } else { direction = DMA_TO_DEVICE; viocmd = viomajorsubtype_blockio | vioblockwrite; - statindex = 1; } d = req->rq_disk->private_data; diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c index ec7aded0a2d..bf70450a49c 100644 --- a/drivers/char/hvc_console.c +++ b/drivers/char/hvc_console.c @@ -367,13 +367,13 @@ static void hvc_close(struct tty_struct *tty, struct file * filp) spin_lock_irqsave(&hp->lock, flags); if (--hp->count == 0) { - if (hp->ops->notifier_del) - hp->ops->notifier_del(hp, hp->data); - /* We are done with the tty pointer now. */ hp->tty = NULL; spin_unlock_irqrestore(&hp->lock, flags); + if (hp->ops->notifier_del) + hp->ops->notifier_del(hp, hp->data); + /* * Chain calls chars_in_buffer() and returns immediately if * there is no buffered data otherwise sleeps on a wait queue @@ -416,11 +416,11 @@ static void hvc_hangup(struct tty_struct *tty) hp->n_outbuf = 0; hp->tty = NULL; + spin_unlock_irqrestore(&hp->lock, flags); + if (hp->ops->notifier_del) hp->ops->notifier_del(hp, hp->data); - spin_unlock_irqrestore(&hp->lock, flags); - while(temp_open_count) { --temp_open_count; kref_put(&hp->kref, destroy_hvc_struct); diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 8e8afb6141f..3123bf57ad9 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -2695,7 +2695,7 @@ static __devinit void default_find_bmc(void) for (i = 0; ; i++) { if (!ipmi_defaults[i].port) break; -#ifdef CONFIG_PPC_MERGE +#ifdef CONFIG_PPC if (check_legacy_ioport(ipmi_defaults[i].port)) continue; #endif diff --git a/drivers/hwmon/ams/ams.h b/drivers/hwmon/ams/ams.h index a6221e5dd98..221ef6915a5 100644 --- a/drivers/hwmon/ams/ams.h +++ b/drivers/hwmon/ams/ams.h @@ -4,7 +4,7 @@ #include <linux/mutex.h> #include <linux/spinlock.h> #include <linux/types.h> -#include <asm/of_device.h> +#include <linux/of_device.h> enum ams_irq { AMS_IRQ_FREEFALL = 0x01, diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index 27443f073bc..a9a45fcc854 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -312,7 +312,6 @@ static struct i2c_adapter mpc_ops = { .name = "MPC adapter", .id = I2C_HW_MPC107, .algo = &mpc_algo, - .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .timeout = 1, }; diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c index f80df9ae505..9eb76268ec7 100644 --- a/drivers/i2c/busses/i2c-pca-isa.c +++ b/drivers/i2c/busses/i2c-pca-isa.c @@ -126,7 +126,7 @@ static int __devinit pca_isa_probe(struct device *dev, unsigned int id) dev_info(dev, "i/o base %#08lx. irq %d\n", base, irq); -#ifdef CONFIG_PPC_MERGE +#ifdef CONFIG_PPC if (check_legacy_ioport(base)) { dev_err(dev, "I/O address %#08lx is not available\n", base); goto out; diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index a95cb9465d6..17356827b93 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -172,4 +172,15 @@ config MENELAUS and other features that are often used in portable devices like cell phones and PDAs. +config MCU_MPC8349EMITX + tristate "MPC8349E-mITX MCU driver" + depends on I2C && PPC_83xx + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Say Y here to enable soft power-off functionality on the Freescale + boards with the MPC8349E-mITX-compatible MCU chips. This driver will + also register MCU GPIOs with the generic GPIO API, so you'll able + to use MCU pins as GPIOs. + endmenu diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index 39e3e69ed12..ca520fa143d 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_MENELAUS) += menelaus.o obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o +obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) EXTRA_CFLAGS += -DDEBUG diff --git a/drivers/i2c/chips/mcu_mpc8349emitx.c b/drivers/i2c/chips/mcu_mpc8349emitx.c new file mode 100644 index 00000000000..82a9bcb858b --- /dev/null +++ b/drivers/i2c/chips/mcu_mpc8349emitx.c @@ -0,0 +1,209 @@ +/* + * Power Management and GPIO expander driver for MPC8349E-mITX-compatible MCU + * + * Copyright (c) 2008 MontaVista Software, Inc. + * + * Author: Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/mutex.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <asm/prom.h> +#include <asm/machdep.h> + +/* + * I don't have specifications for the MCU firmware, I found this register + * and bits positions by the trial&error method. + */ +#define MCU_REG_CTRL 0x20 +#define MCU_CTRL_POFF 0x40 + +#define MCU_NUM_GPIO 2 + +struct mcu { + struct mutex lock; + struct device_node *np; + struct i2c_client *client; + struct of_gpio_chip of_gc; + u8 reg_ctrl; +}; + +static struct mcu *glob_mcu; + +static void mcu_power_off(void) +{ + struct mcu *mcu = glob_mcu; + + pr_info("Sending power-off request to the MCU...\n"); + mutex_lock(&mcu->lock); + i2c_smbus_write_byte_data(glob_mcu->client, MCU_REG_CTRL, + mcu->reg_ctrl | MCU_CTRL_POFF); + mutex_unlock(&mcu->lock); +} + +static void mcu_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_gpio_chip *of_gc = to_of_gpio_chip(gc); + struct mcu *mcu = container_of(of_gc, struct mcu, of_gc); + u8 bit = 1 << (4 + gpio); + + mutex_lock(&mcu->lock); + if (val) + mcu->reg_ctrl &= ~bit; + else + mcu->reg_ctrl |= bit; + + i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL, mcu->reg_ctrl); + mutex_unlock(&mcu->lock); +} + +static int mcu_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + mcu_gpio_set(gc, gpio, val); + return 0; +} + +static int mcu_gpiochip_add(struct mcu *mcu) +{ + struct device_node *np; + struct of_gpio_chip *of_gc = &mcu->of_gc; + struct gpio_chip *gc = &of_gc->gc; + int ret; + + np = of_find_compatible_node(NULL, NULL, "fsl,mcu-mpc8349emitx"); + if (!np) + return -ENODEV; + + gc->owner = THIS_MODULE; + gc->label = np->full_name; + gc->can_sleep = 1; + gc->ngpio = MCU_NUM_GPIO; + gc->base = -1; + gc->set = mcu_gpio_set; + gc->direction_output = mcu_gpio_dir_out; + of_gc->gpio_cells = 2; + of_gc->xlate = of_gpio_simple_xlate; + + np->data = of_gc; + mcu->np = np; + + /* + * We don't want to lose the node, its ->data and ->full_name... + * So, if succeeded, we don't put the node here. + */ + ret = gpiochip_add(gc); + if (ret) + of_node_put(np); + return ret; +} + +static int mcu_gpiochip_remove(struct mcu *mcu) +{ + int ret; + + ret = gpiochip_remove(&mcu->of_gc.gc); + if (ret) + return ret; + of_node_put(mcu->np); + + return 0; +} + +static int __devinit mcu_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct mcu *mcu; + int ret; + + mcu = kzalloc(sizeof(*mcu), GFP_KERNEL); + if (!mcu) + return -ENOMEM; + + mutex_init(&mcu->lock); + mcu->client = client; + i2c_set_clientdata(client, mcu); + + ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL); + if (ret < 0) + goto err; + mcu->reg_ctrl = ret; + + ret = mcu_gpiochip_add(mcu); + if (ret) + goto err; + + /* XXX: this is potentially racy, but there is no lock for ppc_md */ + if (!ppc_md.power_off) { + glob_mcu = mcu; + ppc_md.power_off = mcu_power_off; + dev_info(&client->dev, "will provide power-off service\n"); + } + + return 0; +err: + kfree(mcu); + return ret; +} + +static int __devexit mcu_remove(struct i2c_client *client) +{ + struct mcu *mcu = i2c_get_clientdata(client); + int ret; + + if (glob_mcu == mcu) { + ppc_md.power_off = NULL; + glob_mcu = NULL; + } + + ret = mcu_gpiochip_remove(mcu); + if (ret) + return ret; + i2c_set_clientdata(client, NULL); + kfree(mcu); + return 0; +} + +static const struct i2c_device_id mcu_ids[] = { + { "mcu-mpc8349emitx", }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, mcu_ids); + +static struct i2c_driver mcu_driver = { + .driver = { + .name = "mcu-mpc8349emitx", + .owner = THIS_MODULE, + }, + .probe = mcu_probe, + .remove = __devexit_p(mcu_remove), + .id_table = mcu_ids, +}; + +static int __init mcu_init(void) +{ + return i2c_add_driver(&mcu_driver); +} +module_init(mcu_init); + +static void __exit mcu_exit(void) +{ + i2c_del_driver(&mcu_driver); +} +module_exit(mcu_exit); + +MODULE_DESCRIPTION("Power Management and GPIO expander driver for " + "MPC8349E-mITX-compatible MCU"); +MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h index f451c7351a9..847f4aad7ed 100644 --- a/drivers/input/serio/i8042-io.h +++ b/drivers/input/serio/i8042-io.h @@ -67,7 +67,7 @@ static inline int i8042_platform_init(void) * On some platforms touching the i8042 data register region can do really * bad things. Because of this the region is always reserved on such boxes. */ -#if defined(CONFIG_PPC_MERGE) +#if defined(CONFIG_PPC) if (check_legacy_ioport(I8042_DATA_REG)) return -ENODEV; #endif diff --git a/drivers/net/ibm_newemac/Kconfig b/drivers/net/ibm_newemac/Kconfig index bcec7320895..78a1628c989 100644 --- a/drivers/net/ibm_newemac/Kconfig +++ b/drivers/net/ibm_newemac/Kconfig @@ -62,3 +62,15 @@ config IBM_NEW_EMAC_TAH config IBM_NEW_EMAC_EMAC4 bool default n + +config IBM_NEW_EMAC_NO_FLOW_CTRL + bool + default n + +config IBM_NEW_EMAC_MAL_CLR_ICINTSTAT + bool + default n + +config IBM_NEW_EMAC_MAL_COMMON_ERR + bool + default n diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index 58dfd32ccca..efcf21c9f5c 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -202,13 +202,15 @@ static inline int emac_phy_supports_gige(int phy_mode) { return phy_mode == PHY_MODE_GMII || phy_mode == PHY_MODE_RGMII || + phy_mode == PHY_MODE_SGMII || phy_mode == PHY_MODE_TBI || phy_mode == PHY_MODE_RTBI; } static inline int emac_phy_gpcs(int phy_mode) { - return phy_mode == PHY_MODE_TBI || + return phy_mode == PHY_MODE_SGMII || + phy_mode == PHY_MODE_TBI || phy_mode == PHY_MODE_RTBI; } @@ -562,8 +564,9 @@ static int emac_configure(struct emac_instance *dev) switch (dev->phy.speed) { case SPEED_1000: if (emac_phy_gpcs(dev->phy.mode)) { - mr1 |= EMAC_MR1_MF_1000GPCS | - EMAC_MR1_MF_IPPA(dev->phy.address); + mr1 |= EMAC_MR1_MF_1000GPCS | EMAC_MR1_MF_IPPA( + (dev->phy.gpcs_address != 0xffffffff) ? + dev->phy.gpcs_address : dev->phy.address); /* Put some arbitrary OUI, Manuf & Rev IDs so we can * identify this GPCS PHY later. @@ -675,8 +678,12 @@ static int emac_configure(struct emac_instance *dev) out_be32(&p->iser, r); /* We need to take GPCS PHY out of isolate mode after EMAC reset */ - if (emac_phy_gpcs(dev->phy.mode)) - emac_mii_reset_phy(&dev->phy); + if (emac_phy_gpcs(dev->phy.mode)) { + if (dev->phy.gpcs_address != 0xffffffff) + emac_mii_reset_gpcs(&dev->phy); + else + emac_mii_reset_phy(&dev->phy); + } return 0; } @@ -881,7 +888,9 @@ static int emac_mdio_read(struct net_device *ndev, int id, int reg) struct emac_instance *dev = netdev_priv(ndev); int res; - res = __emac_mdio_read(dev->mdio_instance ? dev->mdio_instance : dev, + res = __emac_mdio_read((dev->mdio_instance && + dev->phy.gpcs_address != id) ? + dev->mdio_instance : dev, (u8) id, (u8) reg); return res; } @@ -890,7 +899,9 @@ static void emac_mdio_write(struct net_device *ndev, int id, int reg, int val) { struct emac_instance *dev = netdev_priv(ndev); - __emac_mdio_write(dev->mdio_instance ? dev->mdio_instance : dev, + __emac_mdio_write((dev->mdio_instance && + dev->phy.gpcs_address != id) ? + dev->mdio_instance : dev, (u8) id, (u8) reg, (u16) val); } @@ -2382,7 +2393,11 @@ static int __devinit emac_init_phy(struct emac_instance *dev) * XXX I probably should move these settings to the dev tree */ dev->phy.address = -1; - dev->phy.features = SUPPORTED_100baseT_Full | SUPPORTED_MII; + dev->phy.features = SUPPORTED_MII; + if (emac_phy_supports_gige(dev->phy_mode)) + dev->phy.features |= SUPPORTED_1000baseT_Full; + else + dev->phy.features |= SUPPORTED_100baseT_Full; dev->phy.pause = 1; return 0; @@ -2421,7 +2436,9 @@ static int __devinit emac_init_phy(struct emac_instance *dev) * Note that the busy_phy_map is currently global * while it should probably be per-ASIC... */ - dev->phy.address = dev->cell_index; + dev->phy.gpcs_address = dev->gpcs_address; + if (dev->phy.gpcs_address == 0xffffffff) + dev->phy.address = dev->cell_index; } emac_configure(dev); @@ -2531,6 +2548,8 @@ static int __devinit emac_init_config(struct emac_instance *dev) dev->phy_address = 0xffffffff; if (emac_read_uint_prop(np, "phy-map", &dev->phy_map, 0)) dev->phy_map = 0xffffffff; + if (emac_read_uint_prop(np, "gpcs-address", &dev->gpcs_address, 0)) + dev->gpcs_address = 0xffffffff; if (emac_read_uint_prop(np->parent, "clock-frequency", &dev->opb_bus_freq, 1)) return -ENXIO; if (emac_read_uint_prop(np, "tah-device", &dev->tah_ph, 0)) @@ -2585,6 +2604,8 @@ static int __devinit emac_init_config(struct emac_instance *dev) if (of_device_is_compatible(np, "ibm,emac-440ep") || of_device_is_compatible(np, "ibm,emac-440gr")) dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX; + if (of_device_is_compatible(np, "ibm,emac-405ez")) + dev->features |= EMAC_FTR_NO_FLOW_CONTROL_40x; } /* Fixup some feature bits based on the device tree */ @@ -2842,6 +2863,9 @@ static int __devinit emac_probe(struct of_device *ofdev, ndev->dev_addr[0], ndev->dev_addr[1], ndev->dev_addr[2], ndev->dev_addr[3], ndev->dev_addr[4], ndev->dev_addr[5]); + if (dev->phy_mode == PHY_MODE_SGMII) + printk(KERN_NOTICE "%s: in SGMII mode\n", ndev->name); + if (dev->phy.address >= 0) printk("%s: found %s PHY (0x%02x)\n", ndev->name, dev->phy.def->name, dev->phy.address); diff --git a/drivers/net/ibm_newemac/core.h b/drivers/net/ibm_newemac/core.h index 5ca70e55b6c..18d56c6c423 100644 --- a/drivers/net/ibm_newemac/core.h +++ b/drivers/net/ibm_newemac/core.h @@ -190,6 +190,9 @@ struct emac_instance { struct delayed_work link_work; int link_polling; + /* GPCS PHY infos */ + u32 gpcs_address; + /* Shared MDIO if any */ u32 mdio_ph; struct of_device *mdio_dev; @@ -345,6 +348,9 @@ enum { #ifdef CONFIG_IBM_NEW_EMAC_RGMII EMAC_FTR_HAS_RGMII | #endif +#ifdef CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL + EMAC_FTR_NO_FLOW_CONTROL_40x | +#endif EMAC_FTR_460EX_PHY_CLK_FIX | EMAC_FTR_440EP_PHY_CLK_FIX, }; diff --git a/drivers/net/ibm_newemac/mal.c b/drivers/net/ibm_newemac/mal.c index 10c267b2b96..1839d3f154a 100644 --- a/drivers/net/ibm_newemac/mal.c +++ b/drivers/net/ibm_newemac/mal.c @@ -28,6 +28,7 @@ #include <linux/delay.h> #include "core.h" +#include <asm/dcr-regs.h> static int mal_count; @@ -279,6 +280,10 @@ static irqreturn_t mal_txeob(int irq, void *dev_instance) mal_schedule_poll(mal); set_mal_dcrn(mal, MAL_TXEOBISR, r); + if (mal_has_feature(mal, MAL_FTR_CLEAR_ICINTSTAT)) + mtdcri(SDR0, DCRN_SDR_ICINTSTAT, + (mfdcri(SDR0, DCRN_SDR_ICINTSTAT) | ICINTSTAT_ICTX)); + return IRQ_HANDLED; } @@ -293,6 +298,10 @@ static irqreturn_t mal_rxeob(int irq, void *dev_instance) mal_schedule_poll(mal); set_mal_dcrn(mal, MAL_RXEOBISR, r); + if (mal_has_feature(mal, MAL_FTR_CLEAR_ICINTSTAT)) + mtdcri(SDR0, DCRN_SDR_ICINTSTAT, + (mfdcri(SDR0, DCRN_SDR_ICINTSTAT) | ICINTSTAT_ICRX)); + return IRQ_HANDLED; } @@ -336,6 +345,25 @@ static irqreturn_t mal_rxde(int irq, void *dev_instance) return IRQ_HANDLED; } +static irqreturn_t mal_int(int irq, void *dev_instance) +{ + struct mal_instance *mal = dev_instance; + u32 esr = get_mal_dcrn(mal, MAL_ESR); + + if (esr & MAL_ESR_EVB) { + /* descriptor error */ + if (esr & MAL_ESR_DE) { + if (esr & MAL_ESR_CIDT) + return mal_rxde(irq, dev_instance); + else + return mal_txde(irq, dev_instance); + } else { /* SERR */ + return mal_serr(irq, dev_instance); + } + } + return IRQ_HANDLED; +} + void mal_poll_disable(struct mal_instance *mal, struct mal_commac *commac) { /* Spinlock-type semantics: only one caller disable poll at a time */ @@ -493,6 +521,8 @@ static int __devinit mal_probe(struct of_device *ofdev, unsigned int dcr_base; const u32 *prop; u32 cfg; + unsigned long irqflags; + irq_handler_t hdlr_serr, hdlr_txde, hdlr_rxde; mal = kzalloc(sizeof(struct mal_instance), GFP_KERNEL); if (!mal) { @@ -542,11 +572,21 @@ static int __devinit mal_probe(struct of_device *ofdev, goto fail; } + if (of_device_is_compatible(ofdev->node, "ibm,mcmal-405ez")) + mal->features |= (MAL_FTR_CLEAR_ICINTSTAT | + MAL_FTR_COMMON_ERR_INT); + mal->txeob_irq = irq_of_parse_and_map(ofdev->node, 0); mal->rxeob_irq = irq_of_parse_and_map(ofdev->node, 1); mal->serr_irq = irq_of_parse_and_map(ofdev->node, 2); - mal->txde_irq = irq_of_parse_and_map(ofdev->node, 3); - mal->rxde_irq = irq_of_parse_and_map(ofdev->node, 4); + + if (mal_has_feature(mal, MAL_FTR_COMMON_ERR_INT)) { + mal->txde_irq = mal->rxde_irq = mal->serr_irq; + } else { + mal->txde_irq = irq_of_parse_and_map(ofdev->node, 3); + mal->rxde_irq = irq_of_parse_and_map(ofdev->node, 4); + } + if (mal->txeob_irq == NO_IRQ || mal->rxeob_irq == NO_IRQ || mal->serr_irq == NO_IRQ || mal->txde_irq == NO_IRQ || mal->rxde_irq == NO_IRQ) { @@ -608,16 +648,26 @@ static int __devinit mal_probe(struct of_device *ofdev, sizeof(struct mal_descriptor) * mal_rx_bd_offset(mal, i)); - err = request_irq(mal->serr_irq, mal_serr, 0, "MAL SERR", mal); + if (mal_has_feature(mal, MAL_FTR_COMMON_ERR_INT)) { + irqflags = IRQF_SHARED; + hdlr_serr = hdlr_txde = hdlr_rxde = mal_int; + } else { + irqflags = 0; + hdlr_serr = mal_serr; + hdlr_txde = mal_txde; + hdlr_rxde = mal_rxde; + } + + err = request_irq(mal->serr_irq, hdlr_serr, irqflags, "MAL SERR", mal); if (err) goto fail2; - err = request_irq(mal->txde_irq, mal_txde, 0, "MAL TX DE", mal); + err = request_irq(mal->txde_irq, hdlr_txde, irqflags, "MAL TX DE", mal); if (err) goto fail3; err = request_irq(mal->txeob_irq, mal_txeob, 0, "MAL TX EOB", mal); if (err) goto fail4; - err = request_irq(mal->rxde_irq, mal_rxde, 0, "MAL RX DE", mal); + err = request_irq(mal->rxde_irq, hdlr_rxde, irqflags, "MAL RX DE", mal); if (err) goto fail5; err = request_irq(mal->rxeob_irq, mal_rxeob, 0, "MAL RX EOB", mal); diff --git a/drivers/net/ibm_newemac/mal.h b/drivers/net/ibm_newemac/mal.h index 717dc38b685..2f0a8736084 100644 --- a/drivers/net/ibm_newemac/mal.h +++ b/drivers/net/ibm_newemac/mal.h @@ -213,6 +213,8 @@ struct mal_instance { struct of_device *ofdev; int index; spinlock_t lock; + + unsigned int features; }; static inline u32 get_mal_dcrn(struct mal_instance *mal, int reg) @@ -225,6 +227,38 @@ static inline void set_mal_dcrn(struct mal_instance *mal, int reg, u32 val) dcr_write(mal->dcr_host, reg, val); } +/* Features of various MAL implementations */ + +/* Set if you have interrupt coalescing and you have to clear the SDR + * register for TXEOB and RXEOB interrupts to work + */ +#define MAL_FTR_CLEAR_ICINTSTAT 0x00000001 + +/* Set if your MAL has SERR, TXDE, and RXDE OR'd into a single UIC + * interrupt + */ +#define MAL_FTR_COMMON_ERR_INT 0x00000002 + +enum { + MAL_FTRS_ALWAYS = 0, + + MAL_FTRS_POSSIBLE = +#ifdef CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT + MAL_FTR_CLEAR_ICINTSTAT | +#endif +#ifdef CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR + MAL_FTR_COMMON_ERR_INT | +#endif + 0, +}; + +static inline int mal_has_feature(struct mal_instance *dev, + unsigned long feature) +{ + return (MAL_FTRS_ALWAYS & feature) || + (MAL_FTRS_POSSIBLE & dev->features & feature); +} + /* Register MAL devices */ int mal_init(void); void mal_exit(void); diff --git a/drivers/net/ibm_newemac/phy.c b/drivers/net/ibm_newemac/phy.c index 9164abb72d9..c40cd8df221 100644 --- a/drivers/net/ibm_newemac/phy.c +++ b/drivers/net/ibm_newemac/phy.c @@ -38,6 +38,16 @@ static inline void phy_write(struct mii_phy *phy, int reg, int val) phy->mdio_write(phy->dev, phy->address, reg, val); } +static inline int gpcs_phy_read(struct mii_phy *phy, int reg) +{ + return phy->mdio_read(phy->dev, phy->gpcs_address, reg); +} + +static inline void gpcs_phy_write(struct mii_phy *phy, int reg, int val) +{ + phy->mdio_write(phy->dev, phy->gpcs_address, reg, val); +} + int emac_mii_reset_phy(struct mii_phy *phy) { int val; @@ -62,6 +72,37 @@ int emac_mii_reset_phy(struct mii_phy *phy) return limit <= 0; } +int emac_mii_reset_gpcs(struct mii_phy *phy) +{ + int val; + int limit = 10000; + + val = gpcs_phy_read(phy, MII_BMCR); + val &= ~(BMCR_ISOLATE | BMCR_ANENABLE); + val |= BMCR_RESET; + gpcs_phy_write(phy, MII_BMCR, val); + + udelay(300); + + while (limit--) { + val = gpcs_phy_read(phy, MII_BMCR); + if (val >= 0 && (val & BMCR_RESET) == 0) + break; + udelay(10); + } + if ((val & BMCR_ISOLATE) && limit > 0) + gpcs_phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE); + + if (limit > 0 && phy->mode == PHY_MODE_SGMII) { + /* Configure GPCS interface to recommended setting for SGMII */ + gpcs_phy_write(phy, 0x04, 0x8120); /* AsymPause, FDX */ + gpcs_phy_write(phy, 0x07, 0x2801); /* msg_pg, toggle */ + gpcs_phy_write(phy, 0x00, 0x0140); /* 1Gbps, FDX */ + } + + return limit <= 0; +} + static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise) |