aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorNed Forrester <nforrester@whoi.edu>2008-02-24 02:10:06 +0000
committerChris Wright <chrisw@sous-sol.org>2008-03-24 11:47:22 -0700
commitd8d644bcd0e46dc2a354ffce219a788630a0cdcc (patch)
tree2631b510bfa6022c2682a5165b436ef0c9803e2c /drivers
parent55004de819a04430d92aaa5f6c39464862b57028 (diff)
spi: pxa2xx_spi clock polarity fix
commit: b97c74bddce4e2c6fef6b3b58910b4fd9eb7f3b8 Fixes a sequencing bug in spi driver pxa2xx_spi.c in which the chip select for a transfer may be asserted before the clock polarity is set on the interface. As a result of this bug, the clock signal may have the wrong polarity at transfer start, so it may need to make an extra half transition before the intended clock/data signals begin. (This probably means all transfers are one bit out of sequence.) This only occurs on the first transfer following a change in clock polarity in systems using more than one more than one such polarity. The fix assures that the clock mode is properly set before asserting chip select. This bug was introduced in a patch merged on 2006/12/10, kernel 2.6.20. The patch defines an additional bit in: include/asm-arm/arch-pxa/regs-ssp.h for 2.6.25 and newer kernels but this addition must be made in: include/asm-arm/arch-pxa/pxa-regs.h for kernels between 2.6.20 and 2.6.24, inclusive Signed-off-by: Ned Forrester <nforrester@whoi.edu> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [chrisw@sous-sol.org: backport to 2.6.24.3] Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/spi/pxa2xx_spi.c41
1 files changed, 27 insertions, 14 deletions
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 1c2ab541d37..840e6825503 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -48,13 +48,19 @@ MODULE_LICENSE("GPL");
#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0)
-/* for testing SSCR1 changes that require SSP restart, basically
- * everything except the service and interrupt enables */
-#define SSCR1_CHANGE_MASK (SSCR1_TTELP | SSCR1_TTE | SSCR1_EBCEI | SSCR1_SCFR \
+/*
+ * for testing SSCR1 changes that require SSP restart, basically
+ * everything except the service and interrupt enables, the pxa270 developer
+ * manual says only SSCR1_SCFR, SSCR1_SPH, SSCR1_SPO need to be in this
+ * list, but the PXA255 dev man says all bits without really meaning the
+ * service and interrupt enables
+ */
+#define SSCR1_CHANGE_MASK (SSCR1_TTELP | SSCR1_TTE | SSCR1_SCFR \
| SSCR1_ECRA | SSCR1_ECRB | SSCR1_SCLKDIR \
- | SSCR1_RWOT | SSCR1_TRAIL | SSCR1_PINTE \
- | SSCR1_STRF | SSCR1_EFWR |SSCR1_RFT \
- | SSCR1_TFT | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM)
+ | SSCR1_SFRMDIR | SSCR1_RWOT | SSCR1_TRAIL \
+ | SSCR1_IFS | SSCR1_STRF | SSCR1_EFWR \
+ | SSCR1_RFT | SSCR1_TFT | SSCR1_MWDS \
+ | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM)
#define DEFINE_SSP_REG(reg, off) \
static inline u32 read_##reg(void *p) { return __raw_readl(p + (off)); } \
@@ -961,9 +967,6 @@ static void pump_transfers(unsigned long data)
if (drv_data->ssp_type == PXA25x_SSP)
DCMD(drv_data->tx_channel) |= DCMD_ENDIRQEN;
- /* Fix me, need to handle cs polarity */
- drv_data->cs_control(PXA2XX_CS_ASSERT);
-
/* Clear status and start DMA engine */
cr1 = chip->cr1 | dma_thresh | drv_data->dma_cr1;
write_SSSR(drv_data->clear_sr, reg);
@@ -973,9 +976,6 @@ static void pump_transfers(unsigned long data)
/* Ensure we have the correct interrupt handler */
drv_data->transfer_handler = interrupt_transfer;
- /* Fix me, need to handle cs polarity */
- drv_data->cs_control(PXA2XX_CS_ASSERT);
-
/* Clear status */
cr1 = chip->cr1 | chip->threshold | drv_data->int_cr1;
write_SSSR(drv_data->clear_sr, reg);
@@ -986,16 +986,29 @@ static void pump_transfers(unsigned long data)
|| (read_SSCR1(reg) & SSCR1_CHANGE_MASK) !=
(cr1 & SSCR1_CHANGE_MASK)) {
+ /* stop the SSP, and update the other bits */
write_SSCR0(cr0 & ~SSCR0_SSE, reg);
if (drv_data->ssp_type != PXA25x_SSP)
write_SSTO(chip->timeout, reg);
- write_SSCR1(cr1, reg);
+ /* first set CR1 without interrupt and service enables */
+ write_SSCR1(cr1 & SSCR1_CHANGE_MASK, reg);
+ /* restart the SSP */
write_SSCR0(cr0, reg);
+
} else {
if (drv_data->ssp_type != PXA25x_SSP)
write_SSTO(chip->timeout, reg);
- write_SSCR1(cr1, reg);
}
+
+ /* FIXME, need to handle cs polarity,
+ * this driver uses struct pxa2xx_spi_chip.cs_control to
+ * specify a CS handling function, and it ignores most
+ * struct spi_device.mode[s], including SPI_CS_HIGH */
+ drv_data->cs_control(PXA2XX_CS_ASSERT);
+
+ /* after chip select, release the data by enabling service
+ * requests and interrupts, without changing any mode bits */
+ write_SSCR1(cr1, reg);
}
static void pump_messages(struct work_struct *work)