Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:
 "Just a small pile of fixes"

 1) Fix race conditions in IP fragmentation LRU list handling, from
    Konstantin Khlebnikov.

 2) vfree() is no longer verboten in interrupts, so deferring is
    pointless, from Al Viro.

 3) Conversion from mutex to semaphore in netpoll left trylock test
    inverted, caught by Dan Carpenter.

 4) 3c59x uses wrong base address when releasing regions, from Sergei
    Shtylyov.

 5) Bounds checking in TIPC from Dan Carpenter.

 6) Fastopen cookies should not be expired as aggressively as other TCP
    metrics.  From Eric Dumazet.

 7) Fix retrieval of MAC address in ibmveth, from Ben Herrenschmidt.

 8) Don't use "u16" in virtio user headers, from Stephen Hemminger

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  tipc: potential divide by zero in tipc_link_recv_fragment()
  tipc: add a bounds check in link_recv_changeover_msg()
  net/usb: new driver for RTL8152
  3c59x: fix freeing nonexistent resource on driver unload
  netpoll: inverted down_trylock() test
  rps_dev_flow_table_release(): no need to delay vfree()
  fib_trie: no need to delay vfree()
  net: frag, fix race conditions in LRU list maintenance
  tcp: do not expire TCP fastopen cookies
  net/eth/ibmveth: Fixup retrieval of MAC address
  virtio: don't expose u16 in userspace api

6 files changed, 1800 insertions, 14 deletions

diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c
index 1928e200158..de570a8f896 100644
--- a/drivers/net/ethernet/3com/3c59x.c
+++ b/drivers/net/ethernet/3com/3c59x.c
@@ -951,7 +951,7 @@ static int vortex_eisa_remove(struct device *device)
 
 	unregister_netdev(dev);
 	iowrite16(TotalReset|0x14, ioaddr + EL3_CMD);
-	release_region(dev->base_addr, VORTEX_TOTAL_SIZE);
+	release_region(edev->base_addr, VORTEX_TOTAL_SIZE);
 
 	free_netdev(dev);
 	return 0;
diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c
index 302d5940106..70fd5596884 100644
--- a/drivers/net/ethernet/ibm/ibmveth.c
+++ b/drivers/net/ethernet/ibm/ibmveth.c
@@ -1322,7 +1322,7 @@ static const struct net_device_ops ibmveth_netdev_ops = {
 
 static int ibmveth_probe(struct vio_dev *dev, const struct vio_device_id *id)
 {
-	int rc, i;
+	int rc, i, mac_len;
 	struct net_device *netdev;
 	struct ibmveth_adapter *adapter;
 	unsigned char *mac_addr_p;
@@ -1332,11 +1332,19 @@ static int ibmveth_probe(struct vio_dev *dev, const struct vio_device_id *id)
 		dev->unit_address);
 
 	mac_addr_p = (unsigned char *)vio_get_attribute(dev, VETH_MAC_ADDR,
-							NULL);
+							&mac_len);
 	if (!mac_addr_p) {
 		dev_err(&dev->dev, "Can't find VETH_MAC_ADDR attribute\n");
 		return -EINVAL;
 	}
+	/* Workaround for old/broken pHyp */
+	if (mac_len == 8)
+		mac_addr_p += 2;
+	else if (mac_len != 6) {
+		dev_err(&dev->dev, "VETH_MAC_ADDR attribute wrong len %d\n",
+			mac_len);
+		return -EINVAL;
+	}
 
 	mcastFilterSize_p = (unsigned int *)vio_get_attribute(dev,
 						VETH_MCAST_FILTER_SIZE, NULL);
@@ -1361,17 +1369,6 @@ static int ibmveth_probe(struct vio_dev *dev, const struct vio_device_id *id)
 
 	netif_napi_add(netdev, &adapter->napi, ibmveth_poll, 16);
 
-	/*
-	 * Some older boxes running PHYP non-natively have an OF that returns
-	 * a 8-byte local-mac-address field (and the first 2 bytes have to be
-	 * ignored) while newer boxes' OF return a 6-byte field. Note that
-	 * IEEE 1275 specifies that local-mac-address must be a 6-byte field.
-	 * The RPA doc specifies that the first byte must be 10b, so we'll
-	 * just look for it to solve this 8 vs. 6 byte field issue
-	 */
-	if ((*mac_addr_p & 0x3) != 0x02)
-		mac_addr_p += 2;
-
 	adapter->mac_addr = 0;
 	memcpy(&adapter->mac_addr, mac_addr_p, 6);
 
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 7c769d8e25a..287cc624b90 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -93,6 +93,17 @@ config USB_RTL8150
 	  To compile this driver as a module, choose M here: the
 	  module will be called rtl8150.
 
+config USB_RTL8152
+	tristate "Realtek RTL8152 Based USB 2.0 Ethernet Adapters"
+	select NET_CORE
+	select MII
+	help
+	  This option adds support for Realtek RTL8152 based USB 2.0
+	  10/100 Ethernet adapters.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called r8152.
+
 config USB_USBNET
 	tristate "Multi-purpose USB Networking Framework"
 	select NET_CORE
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index 119b06c9aa1..9ab5c9d4b45 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_USB_CATC)		+= catc.o
 obj-$(CONFIG_USB_KAWETH)	+= kaweth.o
 obj-$(CONFIG_USB_PEGASUS)	+= pegasus.o
 obj-$(CONFIG_USB_RTL8150)	+= rtl8150.o
+obj-$(CONFIG_USB_RTL8152)	+= r8152.o
 obj-$(CONFIG_USB_HSO)		+= hso.o
 obj-$(CONFIG_USB_NET_AX8817X)	+= asix.o
 asix-y := asix_devices.o asix_common.o ax88172a.o
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 4ff71d619cd..24fbec27a22 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -479,6 +479,7 @@ static const struct driver_info wwan_info = {
 #define NOVATEL_VENDOR_ID	0x1410
 #define ZTE_VENDOR_ID		0x19D2
 #define DELL_VENDOR_ID		0x413C
+#define REALTEK_VENDOR_ID	0x0bda
 
 static const struct usb_device_id	products [] = {
 /*
@@ -619,6 +620,15 @@ static const struct usb_device_id	products [] = {
 	.driver_info = 0,
 },
 
+/* Realtek RTL8152 Based USB 2.0 Ethernet Adapters */
+#if defined(CONFIG_USB_RTL8152) || defined(CONFIG_USB_RTL8152_MODULE)
+{
+	USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8152, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+#endif
+
 /*
  * WHITELIST!!!
  *
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
new file mode 100644
index 00000000000..14e51988863
--- /dev/null
+++ b/drivers/net/usb/r8152.c
@@ -0,0 +1,1767 @@
+/*
+ *  Copyright (c) 2013 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/if_vlan.h>
+#include <linux/uaccess.h>
+
+/* Version Information */
+#define DRIVER_VERSION "v1.0.0 (2013/05/03)"
+#define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"
+#define DRIVER_DESC "Realtek RTL8152 Based USB 2.0 Ethernet Adapters"
+#define MODULENAME "r8152"
+
+#define R8152_PHY_ID		32
+
+#define PLA_IDR			0xc000
+#define PLA_RCR			0xc010
+#define PLA_RMS			0xc016
+#define PLA_RXFIFO_CTRL0	0xc0a0
+#define PLA_RXFIFO_CTRL1	0xc0a4
+#define PLA_RXFIFO_CTRL2	0xc0a8
+#define PLA_FMC			0xc0b4
+#define PLA_CFG_WOL		0xc0b6
+#define PLA_MAR			0xcd00
+#define PAL_BDC_CR		0xd1a0
+#define PLA_LEDSEL		0xdd90
+#define PLA_LED_FEATURE		0xdd92
+#define PLA_PHYAR		0xde00
+#define PLA_GPHY_INTR_IMR	0xe022
+#define PLA_EEE_CR		0xe040
+#define PLA_EEEP_CR		0xe080
+#define PLA_MAC_PWR_CTRL	0xe0c0
+#define PLA_TCR0		0xe610
+#define PLA_TCR1		0xe612
+#define PLA_TXFIFO_CTRL		0xe618
+#define PLA_RSTTELLY		0xe800
+#define PLA_CR			0xe813
+#define PLA_CRWECR		0xe81c
+#define PLA_CONFIG5		0xe822
+#define PLA_PHY_PWR		0xe84c
+#define PLA_OOB_CTRL		0xe84f
+#define PLA_CPCR		0xe854
+#define PLA_MISC_0		0xe858
+#define PLA_MISC_1		0xe85a
+#define PLA_OCP_GPHY_BASE	0xe86c
+#define PLA_TELLYCNT		0xe890
+#define PLA_SFF_STS_7		0xe8de
+#define PLA_PHYSTATUS		0xe908
+#define PLA_BP_BA		0xfc26
+#define PLA_BP_0		0xfc28
+#define PLA_BP_1		0xfc2a
+#define PLA_BP_2		0xfc2c
+#define PLA_BP_3		0xfc2e
+#define PLA_BP_4		0xfc30
+#define PLA_BP_5		0xfc32
+#define PLA_BP_6		0xfc34
+#define PLA_BP_7		0xfc36
+
+#define USB_DEV_STAT		0xb808
+#define USB_USB_CTRL		0xd406
+#define USB_PHY_CTRL		0xd408
+#define USB_TX_AGG		0xd40a
+#define USB_RX_BUF_TH		0xd40c
+#define USB_USB_TIMER		0xd428
+#define USB_PM_CTRL_STATUS	0xd432
+#define USB_TX_DMA		0xd434
+#define USB_UPS_CTRL		0xd800
+#define USB_BP_BA		0xfc26
+#define USB_BP_0		0xfc28
+#define USB_BP_1		0xfc2a
+#define USB_BP_2		0xfc2c
+#define USB_BP_3		0xfc2e
+#define USB_BP_4		0xfc30
+#define USB_BP_5		0xfc32
+#define USB_BP_6		0xfc34
+#define USB_BP_7		0xfc36
+
+/* OCP Registers */
+#define OCP_ALDPS_CONFIG	0x2010
+#define OCP_EEE_CONFIG1		0x2080
+#define OCP_EEE_CONFIG2		0x2092
+#define OCP_EEE_CONFIG3		0x2094
+#define OCP_EEE_AR		0xa41a
+#define OCP_EEE_DATA		0xa41c
+
+/* PLA_RCR */
+#define RCR_AAP			0x00000001
+#define RCR_APM			0x00000002
+#define RCR_AM			0x00000004
+#define RCR_AB			0x00000008
+#define RCR_ACPT_ALL		(RCR_AAP | RCR_APM | RCR_AM | RCR_AB)
+
+/* PLA_RXFIFO_CTRL0 */
+#define RXFIFO_THR1_NORMAL	0x00080002
+#define RXFIFO_THR1_OOB		0x01800003
+
+/* PLA_RXFIFO_CTRL1 */
+#define RXFIFO_THR2_FULL	0x00000060
+#define RXFIFO_THR2_HIGH	0x00000038
+#define RXFIFO_THR2_OOB		0x0000004a
+
+/* PLA_RXFIFO_CTRL2 */
+#define RXFIFO_THR3_FULL	0x00000078
+#define RXFIFO_THR3_HIGH	0x00000048
+#define RXFIFO_THR3_OOB		0x0000005a
+
+/* PLA_TXFIFO_CTRL */
+#define TXFIFO_THR_NORMAL	0x00400008
+
+/* PLA_FMC */
+#define FMC_FCR_MCU_EN		0x0001
+
+/* PLA_EEEP_CR */
+#define EEEP_CR_EEEP_TX		0x0002
+
+/* PLA_TCR0 */
+#define TCR0_TX_EMPTY		0x0800
+#define TCR0_AUTO_FIFO		0x0080
+
+/* PLA_TCR1 */
+#define VERSION_MASK		0x7cf0
+
+/* PLA_CR */
+#define CR_RST			0x10
+#define CR_RE			0x08
+#define CR_TE			0x04
+
+/* PLA_CRWECR */
+#define CRWECR_NORAML		0x00
+#define CRWECR_CONFIG		0xc0
+
+/* PLA_OOB_CTRL */
+#define NOW_IS_OOB		0x80
+#define TXFIFO_EMPTY		0x20
+#define RXFIFO_EMPTY		0x10
+#define LINK_LIST_READY		0x02
+#define DIS_MCU_CLROOB		0x01
+#define FIFO_EMPTY		(TXFIFO_EMPTY | RXFIFO_EMPTY)
+
+/* PLA_MISC_1 */
+#define RXDY_GATED_EN		0x0008
+
+/* PLA_SFF_STS_7 */
+#define RE_INIT_LL		0x8000
+#define MCU_BORW_EN		0x4000
+
+/* PLA_CPCR */
+#define CPCR_RX_VLAN		0x0040
+
+/* PLA_CFG_WOL */
+#define MAGIC_EN		0x0001
+
+/* PAL_BDC_CR */
+#define ALDPS_PROXY_MODE	0x0001
+
+/* PLA_CONFIG5 */
+#define LAN_WAKE_EN		0x0002
+
+/* PLA_LED_FEATURE */
+#define LED_MODE_MASK		0x0700
+
+/* PLA_PHY_PWR */
+#define TX_10M_IDLE_EN		0x0080
+#define PFM_PWM_SWITCH		0x0040
+
+/* PLA_MAC_PWR_CTRL */
+#define D3_CLK_GATED_EN		0x00004000
+#define MCU_CLK_RATIO		0x07010f07
+#define MCU_CLK_RATIO_MASK	0x0f0f0f0f
+
+/* PLA_GPHY_INTR_IMR */
+#define GPHY_STS_MSK		0x0001
+#define SPEED_DOWN_MSK		0x0002
+#define SPDWN_RXDV_MSK		0x0004
+#define SPDWN_LINKCHG_MSK	0x0008
+
+/* PLA_PHYAR */
+#define PHYAR_FLAG		0x80000000
+
+/* PLA_EEE_CR */
+#define EEE_RX_EN		0x0001
+#define EEE_TX_EN		0x0002
+
+/* USB_DEV_STAT */
+#define STAT_SPEED_MASK		0x0006
+#define STAT_SPEED_HIGH		0x0000
+#define STAT_SPEED_FULL		0x0001
+
+/* USB_TX_AGG */
+#define TX_AGG_MAX_THRESHOLD	0x03
+
+/* USB_RX_BUF_TH */
+#define RX_BUF_THR		0x7a120180
+
+/* USB_TX_DMA */
+#define TEST_MODE_DISABLE	0x00000001
+#define TX_SIZE_ADJUST1		0x00000100
+
+/* USB_UPS_CTRL */
+#define POWER_CUT		0x0100
+
+/* USB_PM_CTRL_STATUS */
+#define RWSUME_INDICATE		0x0001
+
+/* USB_USB_CTRL */
+#define RX_AGG_DISABLE		0x0010
+
+/* OCP_ALDPS_CONFIG */
+#define ENPWRSAVE		0x8000
+#define ENPDNPS			0x0200
+#define LINKENA			0x0100
+#define DIS_SDSAVE		0x0010
+
+/* OCP_EEE_CONFIG1 */
+#define RG_TXLPI_MSK_HFDUP	0x8000
+#define RG_MATCLR_EN		0x4000
+#define EEE_10_CAP		0x2000
+#define EEE_NWAY_EN		0x1000
+#define TX_QUIET_EN		0x0200
+#define RX_QUIET_EN		0x0100
+#define SDRISETIME		0x0010	/* bit 4 ~ 6 */
+#define RG_RXLPI_MSK_HFDUP	0x0008
+#define SDFALLTIME		0x0007	/* bit 0 ~ 2 */
+
+/* OCP_EEE_CONFIG2 */
+#define RG_LPIHYS_NUM		0x7000	/* bit 12 ~ 15 */
+#define RG_DACQUIET_EN		0x0400
+#define RG_LDVQUIET_EN		0x0200
+#define RG_CKRSEL		0x0020
+#define RG_EEEPRG_EN		0x0010
+
+/* OCP_EEE_CONFIG3 */
+#define FST_SNR_EYE_R		0x1500	/* bit 7 ~ 15 */
+#define RG_LFS_SEL		0x0060	/* bit 6 ~ 5 */
+#define MSK_PH			0x0006	/* bit 0 ~ 3 */
+
+/* OCP_EEE_AR */
+/* bit[15:14] function */
+#define FUN_ADDR		0x0000
+#define FUN_DATA		0x4000
+/* bit[4:0] device addr */
+#define DEVICE_ADDR		0x0007
+
+/* OCP_EEE_DATA */
+#define EEE_ADDR		0x003C
+#define EEE_DATA		0x0002
+
+enum rtl_register_content {
+	_100bps		= 0x08,
+	_10bps		= 0x04,
+	LINK_STATUS	= 0x02,
+	FULL_DUP	= 0x01,
+};
+
+#define RTL8152_REQT_READ	0xc0
+#define RTL8152_REQT_WRITE	0x40
+#define RTL8152_REQ_GET_REGS	0x05
+#define RTL8152_REQ_SET_REGS	0x05
+
+#define BYTE_EN_DWORD		0xff
+#define BYTE_EN_WORD		0x33
+#define BYTE_EN_BYTE		0x11
+#define BYTE_EN_SIX_BYTES	0x3f
+#define BYTE_EN_START_MASK	0x0f
+#define BYTE_EN_END_MASK	0xf0
+
+#define RTL8152_RMS		(VLAN_ETH_FRAME_LEN + VLAN_HLEN)
+#define RTL8152_TX_TIMEOUT	(HZ)
+
+/* rtl8152 flags */
+enum rtl8152_flags {
+	RTL8152_UNPLUG = 0,
+	RX_URB_FAIL,
+	RTL8152_SET_RX_MODE,
+	WORK_ENABLE
+};
+
+/* Define these values to match your device */
+#define VENDOR_ID_REALTEK		0x0bda
+#define PRODUCT_ID_RTL8152		0x8152
+
+#define MCU_TYPE_PLA			0x0100
+#define MCU_TYPE_USB			0x0000
+
+struct rx_desc {
+	u32 opts1;
+#define RX_LEN_MASK			0x7fff
+	u32 opts2;
+	u32 opts3;
+	u32 opts4;
+	u32 opts5;
+	u32 opts6;
+};
+
+struct tx_desc {
+	u32 opts1;
+#define TX_FS			(1 << 31) /* First segment of a packet */
+#define TX_LS			(1 << 30) /* Final segment of a packet */
+#define TX_LEN_MASK		0xffff
+	u32 opts2;
+};
+
+struct r8152 {
+	unsigned long flags;
+	struct usb_device *udev;
+	struct tasklet_struct tl;
+	struct net_device *netdev;
+	struct urb *rx_urb, *tx_urb;
+	struct sk_buff *tx_skb, *rx_skb;
+	struct delayed_work schedule;
+	struct mii_if_info mii;
+	u32 msg_enable;
+	u16 ocp_base;
+	u8 version;
+	u8 speed;
+};
+
+enum rtl_version {
+	RTL_VER_UNKNOWN = 0,
+	RTL_VER_01,
+	RTL_VER_02
+};
+
+/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
+ * The RTL chips use a 64 element hash table based on the Ethernet CRC.
+ */
+static const int multicast_filter_limit = 32;
+
+static
+int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
+{
+	return usb_control_msg(tp->udev, usb_rcvctrlpipe(tp->udev, 0),
+			       RTL8152_REQ_GET_REGS, RTL8152_REQT_READ,
+			       value, index, data, size, 500);
+}
+
+static
+int set_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
+{
+	return usb_control_msg(tp->udev, usb_sndctrlpipe(tp->udev, 0),
+			       RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE,
+			       value, index, data, size, 500);
+}
+
+static int generic_ocp_read(struct r8152 *tp, u16 index, u16 size,
+				void *data, u16 type)
+{
+	u16	limit = 64;
+	int	ret = 0;
+
+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+		return -ENODEV;
+
+	/* both size and indix must be 4 bytes align */
+	if ((size & 3) || !size || (index & 3) || !data)
+		return -EPERM;
+
+	if ((u32)index + (u32)size > 0xffff)
+		return -EPERM;
+
+	while (size) {
+		if (size > limit) {
+			ret = get_registers(tp, index, type, limit, data);
+			if (ret < 0)
+				break;
+
+			index += limit;
+			data += limit;
+			size -= limit;
+		} else {
+			ret = get_registers(tp, index, type, size, data);
+			if (ret < 0)
+				break;
+
+			index += size;
+			data += size;
+			size = 0;
+			break;
+		}
+	}
+
+	return ret;
+}
+
+static int generic_ocp_write(struct r8152 *tp, u16 index, u16 byteen,
+				u16 size, void *data, u16 type)
+{
+	int	ret;
+	u16	byteen_start, byteen_end, byen;
+	u16	limit = 512;
+
+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+		return -ENODEV;
+
+	/* both size and indix must be 4 bytes align */
+	if ((size & 3) || !size || (index & 3) || !data)
+		return -EPERM;
+
+	if ((u32)index + (u32)size > 0xffff)
+		return -EPERM;
+
+	byteen_start = byteen & BYTE_EN_START_MASK;
+	byteen_end = byteen & BYTE_EN_END_MASK;
+
+	byen = byteen_start | (byteen_start << 4);
+	ret = set_registers(tp, index, type | byen, 4, data);
+	if (ret < 0)
+		goto error1;
+
+	index += 4;
+	data += 4;
+	size -= 4;
+
+	if (size) {
+		size -= 4;
+
+		while (size) {
+			if (size > limit) {
+				ret = set_registers(tp, index,
+					type | BYTE_EN_DWORD,
+					limit, data);
+				if (ret < 0)
+					goto error1;
+
+				index += limit;
+				data += limit;
+				size -= limit;
+			} else {
+				ret = set_registers(tp, index,
+					type | BYTE_EN_DWORD,
+					size, data);
+				if (ret < 0)
+					goto error1;
+
+				index += size;
+				data += size;
+				size = 0;
+				break;
+			}
+		}
+
+		byen = byteen_end | (byteen_end >> 4);
+		ret = set_registers(tp, index, type | byen, 4, data);
+		if (ret < 0)
+			goto error1;
+	}
+
+error1:
+	return ret;
+}
+
+static inline
+int pla_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data)
+{
+	return generic_ocp_read(tp, index, size, data, MCU_TYPE_PLA);
+}
+
+static inline
+int pla_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data)
+{
+	return generic_ocp_write(tp, index, byteen, size, data, MCU_TYPE_PLA);
+}
+
+static inline
+int usb_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data)
+{
+	return generic_ocp_read(tp, index, size, data, MCU_TYPE_USB);
+}
+
+static inline
+int usb_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data)
+{
+	return generic_ocp_write(tp, index, byteen, size, data, MCU_TYPE_USB);
+}
+
+static u32 ocp_read_dword(struct r8152 *tp, u16 type, u16 index)
+{
+	u32 data;
+
+	if (type == MCU_TYPE_PLA)
+		pla_ocp_read(tp, index, sizeof(data), &data);
+	else
+		usb_ocp_read(tp, index, sizeof(data), &data);
+
+	return __le32_to_cpu(data);
+}
+
+static void ocp_write_dword(struct r8152 *tp, u16 type, u16 index, u32 data)
+{
+	if (type == MCU_TYPE_PLA)
+		pla_ocp_write(tp, index, BYTE_EN_DWORD, sizeof(data), &data);
+	else
+		usb_ocp_write(tp, index, BYTE_EN_DWORD, sizeof(data), &data);
+}
+
+static u16 ocp_read_word(struct r8152 *tp, u16 type, u16 index)
+{
+	u32 data;
+	u8 shift = index & 2;
+
+	index &= ~3;
+
+	if (type == MCU_TYPE_PLA)
+		pla_ocp_read(tp, index, sizeof(data), &data);
+	else
+		usb_ocp_read(tp, index, sizeof(data), &data);
+
+	data = __le32_to_cpu(data);
+	data >>= (shift * 8);
+	data &= 0xffff;
+
+	return (u16)data;
+}
+
+static void ocp_write_word(struct r8152 *tp, u16 type, u16 index, u32 data)
+{
+	u32 tmp, mask = 0xffff;
+	u16 byen = BYTE_EN_WORD;
+	u8 shift = index & 2;
+
+	data &= mask;
+
+	if (index & 2) {
+		byen <<= shift;
+		mask <<= (shift * 8);
+		data <<= (shift * 8);
+		index &= ~3;
+	}
+
+	if (type == MCU_TYPE_PLA)
+		pla_ocp_read(tp, index, sizeof(tmp), &tmp);
+	else
+		usb_ocp_read(tp, index, sizeof(tmp), &tmp);
+
+	tmp = __le32_to_cpu(tmp) & ~mask;
+	tmp |= data;
+	tmp = __cpu_to_le32(tmp);
+
+	if (type == MCU_TYPE_PLA)
+		pla_ocp_write(tp, index, byen, sizeof(tmp), &tmp);
+	else
+		usb_ocp_write(tp, index, byen, sizeof(tmp), &tmp);
+}
+
+static u8 ocp_read_byte(struct r8152 *tp, u16 type, u16 index)
+{
+	u32 data;
+	u8 shift = index & 3;
+
+	index &= ~3;
+
+	if (type == MCU_TYPE_PLA)
+		pla_ocp_read(tp, index, sizeof(data), &data);
+	else
+		usb_ocp_read(tp, index, sizeof(data), &data);
+
+	data = __le32_to_cpu(data);
+	data >>= (shift * 8);
+	data &= 0xff;
+
+	return (u8)data;
+}
+
+static void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data)
+{
+	u32 tmp, mask = 0xff;
+	u16 byen = BYTE_EN_BYTE;
+	u8 shift = index & 3;
+
+	data &= mask;
+
+	if (index & 3) {
+		byen <<= shift;
+		mask <<= (shift * 8);
+		data <<= (shift * 8);
+		index &= ~3;
+	}
+
+	if (type == MCU_TYPE_PLA)
+		pla_ocp_read(tp, index, sizeof(tmp), &tmp);
+	else
+		usb_ocp_read(tp, index, sizeof(tmp), &tmp);
+
+	tmp = __le32_to_cpu(tmp) & ~mask;
+	tmp |= data;
+	tmp = __cpu_to_le32(tmp);
+
+	if (type == MCU_TYPE_PLA)
+		pla_ocp_write(tp, index, byen, sizeof(tmp), &tmp);
+	else
+		usb_ocp_write(tp, index, byen, sizeof(tmp), &tmp);
+}
+
+static void r8152_mdio_write(struct r8152 *tp, u32 reg_addr, u32 value)
+{
+	u32	ocp_data;
+	int	i;
+
+	ocp_data = PHYAR_FLAG | ((reg_addr & 0x1f) << 16) |
+		   (value & 0xffff);
+
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_PHYAR, ocp_data);
+
+	for (i = 20; i > 0; i--) {
+		udelay(25);
+		ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_PHYAR);
+		if (!(ocp_data & PHYAR_FLAG))
+			break;
+	}
+	udelay(20);
+}
+
+static int r8152_mdio_read(struct r8152 *tp, u32 reg_addr)
+{
+	u32	ocp_data;
+	int	i;
+
+	ocp_data = (reg_addr & 0x1f) << 16;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_PHYAR, ocp_data);
+
+	for (i = 20; i > 0; i--) {
+		udelay(25);
+		ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_PHYAR);
+		if (ocp_data & PHYAR_FLAG)
+			break;
+	}
+	udelay(20);
+
+	if (!(ocp_data & PHYAR_FLAG))
+		return -EAGAIN;
+
+	return (u16)(ocp_data & 0xffff);
+}
+
+static int read_mii_word(struct net_device *netdev, int phy_id, int reg)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	if (phy_id != R8152_PHY_ID)
+		return -EINVAL;
+
+	return r8152_mdio_read(tp, reg);
+}
+
+static
+void write_mii_word(struct net_device *netdev, int phy_id, int reg, int val)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	if (phy_id != R8152_PHY_ID)
+		return;
+
+	r8152_mdio_write(tp, reg, val);
+}
+
+static void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data)
+{
+	u16 ocp_base, ocp_index;
+
+	ocp_base = addr & 0xf000;
+	if (ocp_base != tp->ocp_base) {
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base);
+		tp->ocp_base = ocp_base;
+	}
+
+	ocp_index = (addr & 0x0fff) | 0xb000;
+	ocp_write_word(tp, MCU_TYPE_PLA, ocp_index, data);
+}
+
+static inline void set_ethernet_addr(struct r8152 *tp)
+{
+	struct net_device *dev = tp->netdev;
+	u8 *node_id;
+
+	node_id = kmalloc(sizeof(u8) * 8, GFP_KERNEL);
+	if (!node_id) {
+		netif_err(tp, probe, dev, "out of memory");
+		return;
+	}
+
+	if (pla_ocp_read(tp, PLA_IDR, sizeof(u8) * 8, node_id) < 0)
+		netif_notice(tp, probe, dev, "inet addr fail\n");
+	else {
+		memcpy(dev->dev_addr, node_id, dev->addr_len);
+		memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+	}
+	kfree(node_id);
+}
+
+static int rtl8152_set_mac_address(struct net_device *netdev, void *p)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
+	pla_ocp_write(tp, PLA_IDR, BYTE_EN_SIX_BYTES, 8, addr->sa_data);
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
+
+	return 0;
+}
+
+static int alloc_all_urbs(struct r8152 *tp)
+{
+	tp->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!tp->rx_urb)
+		return 0;
+	tp->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!tp->tx_urb) {
+		usb_free_urb(tp->rx_urb);
+		return 0;
+	}
+
+	return 1;
+}
+
+static void free_all_urbs(struct r8152 *tp)
+{
+	usb_free_urb(tp->rx_urb);
+	usb_free_urb(tp->tx_urb);
+}
+
+static struct net_device_stats *rtl8152_get_stats(struct net_device *dev)
+{
+	return &dev->stats;
+}
+
+static void read_bulk_callback(struct urb *urb)
+{
+	struct r8152 *tp;
+	unsigned pkt_len;
+	struct sk_buff *skb;
+	struct net_device *netdev;
+	struct net_device_stats *stats;
+	int status = urb->status;
+	int result;
+	struct rx_desc *rx_desc;
+
+	tp = urb->context;
+	if (!tp)
+		return;
+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+		return;
+	netdev = tp->netdev;
+	if (!netif_device_present(netdev))
+		return;
+
+	stats = rtl8152_get_stats(netdev);
+	switch (status) {
+	case 0:
+		break;
+	case -ESHUTDOWN:
+		set_bit(RTL8152_UNPLUG, &tp->flags);
+		netif_device_detach(tp->netdev);
+	case -ENOENT:
+		return;	/* the urb is in unlink state */
+	case -ETIME:
+		pr_warn_ratelimited("may be reset is needed?..\n");
+		goto goon;
+	default:
+		pr_warn_ratelimited("Rx status %d\n", status);
+		goto goon;
+	}
+
+	/* protect against short packets (tell me why we got some?!?) */
+	if (urb->actual_length < sizeof(*rx_desc))
+		goto goon;
+
+
+	rx_desc = (struct rx_desc *)urb->transfer_buffer;
+	pkt_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK;
+	if (urb->actual_length < sizeof(struct rx_desc) + pkt_len)
+		goto goon;
+
+	skb = netdev_alloc_skb_ip_align(netdev, pkt_len);
+	if (!skb)
+		goto goon;
+
+	memcpy(skb->data, tp->rx_skb->data + sizeof(struct rx_desc), pkt_len);
+	skb_put(skb, pkt_len);
+	skb->protocol = eth_type_trans(skb, netdev);
+	netif_rx(skb);
+	stats->rx_packets++;
+	stats->rx_bytes += pkt_len;
+goon:
+	usb_fill_bulk_urb(tp->rx_urb, tp->udev, usb_rcvbulkpipe(tp->udev, 1),
+		      tp->rx_skb->data, RTL8152_RMS + sizeof(struct rx_desc),
+		      (usb_complete_t)read_bulk_callback, tp);
+	result = usb_submit_urb(tp->rx_urb, GFP_ATOMIC);
+	if (result == -ENODEV) {
+		netif_device_detach(tp->netdev);
+	} else if (result) {
+		set_bit(RX_URB_FAIL, &tp->flags);
+		goto resched;
+	} else {
+		clear_bit(RX_URB_FAIL, &tp->flags);
+	}
+
+	return;
+resched:
+	tasklet_schedule(&tp->tl);
+}
+
+static void rx_fixup(unsigned long data)
+{
+	struct r8152 *tp;
+	int status;
+
+	tp = (struct r8152 *)data;
+	if (!test_bit(WORK_ENABLE, &tp->flags))
+		return;
+
+	status = usb_submit_urb(tp->rx_urb, GFP_ATOMIC);
+	if (status == -ENODEV) {
+		netif_device_detach(tp->netdev);
+	} else if (status) {
+		set_bit(RX_URB_FAIL, &tp->flags);
+		goto tlsched;
+	} else {
+		clear_bit(RX_URB_FAIL, &tp->flags);
+	}
+
+	return;
+tlsched:
+	tasklet_schedule(&tp->tl);
+}
+
+static void write_bulk_callback(struct urb *urb)
+{
+	struct r8152 *tp;
+	int status = urb->status;
+
+	tp = urb->context;
+	if (!tp)
+		return;
+	dev_kfree_skb_irq(tp->tx_skb);
+	if (!netif_device_present(tp->netdev))
+		return;
+	if (status)
+		dev_info(&urb->dev->dev, "%s: Tx status %d\n",
+			 tp->netdev->name, status);
+	tp->netdev->trans_start = jiffies;
+	netif_wake_queue(tp->netdev);
+}
+
+static void rtl8152_tx_timeout(struct net_device *netdev)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	struct net_device_stats *stats = rtl8152_get_stats(netdev);
+	netif_warn(tp, tx_err, netdev, "Tx timeout.\n");
+	usb_unlink_urb(tp->tx_urb);
+	stats->tx_errors++;
+}
+
+static void rtl8152_set_rx_mode(struct net_device *netdev)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	if (tp->speed & LINK_STATUS)
+		set_bit(RTL8152_SET_RX_MODE, &tp->flags);
+}
+
+static void _rtl8152_set_rx_mode(struct net_device *netdev)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	u32 tmp, *mc_filter;	/* Multicast hash filter */
+	u32 ocp_data;
+
+	mc_filter = kmalloc(sizeof(u32) * 2, GFP_KERNEL);
+	if (!mc_filter) {
+		netif_err(tp, link, netdev, "out of memory");
+		return;
+	}
+
+	clear_bit(RTL8152_SET_RX_MODE, &tp->flags);
+	netif_stop_queue(netdev);
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data &= ~RCR_ACPT_ALL;
+	ocp_data |= RCR_AB | RCR_APM;
+
+	if (netdev->flags & IFF_PROMISC) {
+		/* Unconditionally log net taps. */
+		netif_notice(tp, link, netdev, "Promiscuous mode enabled\n");
+		ocp_data |= RCR_AM | RCR_AAP;
+		mc_filter[1] = mc_filter[0] = 0xffffffff;
+	} else if ((netdev_mc_count(netdev) > multicast_filter_limit) ||
+		   (netdev->flags & IFF_ALLMULTI)) {
+		/* Too many to filter perfectly -- accept all multicasts. */
+		ocp_data |= RCR_AM;
+		mc_filter[1] = mc_filter[0] = 0xffffffff;
+	} else {
+		struct netdev_hw_addr *ha;
+
+		mc_filter[1] = mc_filter[0] = 0;
+		netdev_for_each_mc_addr(ha, netdev) {
+			int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26;
+			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+			ocp_data |= RCR_AM;
+		}
+	}
+
+	tmp = mc_filter[0];
+	mc_filter[0] = __cpu_to_le32(swab32(mc_filter[1]));
+	mc_filter[1] = __cpu_to_le32(swab32(tmp));
+
+	pla_ocp_write(tp, PLA_MAR, BYTE_EN_DWORD, sizeof(u32) * 2, mc_filter);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+	netif_wake_queue(netdev);
+	kfree(mc_filter);
+}
+
+static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb,
+					    struct net_device *netdev)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	struct net_device_stats *stats = rtl8152_get_stats(netdev);
+	struct tx_desc *tx_desc;
+	int len, res;
+
+	netif_stop_queue(netdev);
+	len = skb->len;
+	if (skb_header_cloned(skb) || skb_headroom(skb) < sizeof(*tx_desc)) {
+		struct sk_buff *tx_skb;
+
+		tx_skb = skb_copy_expand(skb, sizeof(*tx_desc), 0, GFP_ATOMIC);
+		dev_kfree_skb_any(skb);
+		if (!tx_skb) {
+			stats->tx_dropped++;
+			netif_wake_queue(netdev);
+			return NETDEV_TX_OK;
+		}
+		skb = tx_skb;
+	}
+	tx_desc = (struct tx_desc *)skb_push(skb, sizeof(*tx_desc));
+	memset(tx_desc, 0, sizeof(*tx_desc));
+	tx_desc->opts1 = cpu_to_le32((len & TX_LEN_MASK) | TX_FS | TX_LS);
+	tp->tx_skb = skb;
+	skb_tx_timestamp(skb);
+	usb_fill_bulk_urb(tp->tx_urb, tp->udev, usb_sndbulkpipe(tp->udev, 2),
+			  skb->data, skb->len,
+			  (usb_complete_t)write_bulk_callback, tp);
+	res = usb_submit_urb(tp->tx_urb, GFP_ATOMIC);
+	if (res) {
+		/* Can we get/handle EPIPE here? */
+		if (res == -ENODEV) {
+			netif_device_detach(tp->netdev);
+		} else {
+			netif_warn(tp, tx_err, netdev,
+				   "failed tx_urb %d\n", res);
+			stats->tx_errors++;
+			netif_start_queue(netdev);
+		}
+	} else {
+		stats->tx_packets++;
+		stats->tx_bytes += skb->len;
+	}
+
+	return NETDEV_TX_OK;
+}
+
+static void r8152b_reset_packet_filter(struct r8152 *tp)
+{
+	u32	ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_FMC);
+	ocp_data &= ~FMC_FCR_MCU_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data);
+	ocp_data |= FMC_FCR_MCU_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data);
+}
+
+static void rtl8152_nic_reset(struct r8152 *tp)
+{
+	int	i;
+
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, CR_RST);
+
+	for (i = 0; i < 1000; i++) {
+		if (!(ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR) & CR_RST))
+			break;
+		udelay(100);
+	}
+}
+
+static inline u8 rtl8152_get_speed(struct r8152 *tp)
+{
+	return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS);
+}
+
+static int rtl8152_enable(struct r8152 *tp)
+{
+	u32	ocp_data;
+	u8 speed;
+
+	speed = rtl8152_get_speed(tp);
+	if (speed & _100bps) {
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
+		ocp_data &= ~EEEP_CR_EEEP_TX;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
+	} else {
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
+		ocp_data |= EEEP_CR_EEEP_TX;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
+	}
+
+	r8152b_reset_packet_filter(tp);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR);
+	ocp_data |= CR_RE | CR_TE;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
+	ocp_data &= ~RXDY_GATED_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+
+	usb_fill_bulk_urb(tp->rx_urb, tp->udev, usb_rcvbulkpipe(tp->udev, 1),
+		      tp->rx_skb->data, RTL8152_RMS + sizeof(struct rx_desc),
+		      (usb_complete_t)read_bulk_callback, tp);
+
+	return usb_submit_urb(tp->rx_urb, GFP_KERNEL);
+}
+
+static void rtl8152_disable(struct r8152 *tp)
+{
+	u32	ocp_data;
+	int	i;
+
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data &= ~RCR_ACPT_ALL;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+
+	usb_kill_urb(tp->tx_urb);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
+	ocp_data |= RXDY_GATED_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+
+	for (i = 0; i < 1000; i++) {
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+		if ((ocp_data & FIFO_EMPTY) == FIFO_EMPTY)
+			break;
+		mdelay(1);
+	}
+
+	for (i = 0; i < 1000; i++) {
+		if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0) & TCR0_TX_EMPTY)
+			break;
+		mdelay(1);
+	}
+
+	usb_kill_urb(tp->rx_urb);
+
+	rtl8152_nic_reset(tp);
+}
+
+static void r8152b_exit_oob(struct r8152 *tp)
+{
+	u32	ocp_data;
+	int	i;
+
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data &= ~RCR_ACPT_ALL;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
+	ocp_data |= RXDY_GATED_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, 0x00);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data &= ~NOW_IS_OOB;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data &= ~MCU_BORW_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+	for (i = 0; i < 1000; i++) {
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+		if (ocp_data & LINK_LIST_READY)
+			break;
+		mdelay(1);
+	}
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data |= RE_INIT_LL;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+	for (i = 0; i < 1000; i++) {
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+		if (ocp_data & LINK_LIST_READY)
+			break;
+		mdelay(1);
+	}
+
+	rtl8152_nic_reset(tp);
+
+	/* rx share fifo credit full threshold */
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_DEV_STAT);
+	ocp_data &= STAT_SPEED_MASK;
+	if (ocp_data == STAT_SPEED_FULL) {
+		/* rx share fifo credit near full threshold */
+		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1,
+				RXFIFO_THR2_FULL);
+		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2,
+				RXFIFO_THR3_FULL);
+	} else {
+		/* rx share fifo credit near full threshold */
+		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1,
+				RXFIFO_THR2_HIGH);
+		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2,
+				RXFIFO_THR3_HIGH);
+	}
+
+	/* TX share fifo free credit full threshold */
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL);
+
+	ocp_write_byte(tp, MCU_TYPE_USB, USB_TX_AGG, TX_AGG_MAX_THRESHOLD);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_BUF_THR);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_TX_DMA,
+			TEST_MODE_DISABLE | TX_SIZE_ADJUST1);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
+	ocp_data &= ~CPCR_RX_VLAN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0);
+	ocp_data |= TCR0_AUTO_FIFO;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR0, ocp_data);
+}
+
+static void r8152b_enter_oob(struct r8152 *tp)
+{
+	u32	ocp_data;
+	int	i;
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data &= ~NOW_IS_OOB;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_OOB);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_OOB);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_OOB);
+
+	rtl8152_disable(tp);
+
+	for (i = 0; i < 1000; i++) {
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+		if (ocp_data & LINK_LIST_READY)
+			break;
+		mdelay(1);
+	}
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data |= RE_INIT_LL;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+	for (i = 0; i < 1000; i++) {
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+		if (ocp_data & LINK_LIST_READY)
+			break;
+		mdelay(1);
+	}
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL);
+	ocp_data |= MAGIC_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
+	ocp_data |= CPCR_RX_VLAN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PAL_BDC_CR);
+	ocp_data |= ALDPS_PROXY_MODE;
+	ocp_write_word(tp, MCU_TYPE_PLA, PAL_BDC_CR, ocp_data);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5, LAN_WAKE_EN);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
+	ocp_data &= ~RXDY_GATED_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data |= RCR_APM | RCR_AM | RCR_AB;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+}
+
+static void r8152b_disable_aldps(struct r8152 *tp)
+{
+	ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPDNPS | LINKENA | DIS_SDSAVE);
+	msleep(20);
+}
+
+static inline void r8152b_enable_aldps(struct r8152 *tp)
+{
+	ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPWRSAVE | ENPDNPS |
+					    LINKENA | DIS_SDSAVE);
+}
+
+static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex)
+{
+	u16 bmcr, anar;
+	int ret = 0;
+
+	cancel_delayed_work_sync(&tp->schedule);
+	anar = r8152_mdio_read(tp, MII_ADVERTISE);
+	anar &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL |
+		  ADVERTISE_100HALF | ADVERTISE_100FULL);
+
+	if (autoneg == AUTONEG_DISABLE) {
+		if (speed == SPEED_10) {
+			bmcr = 0;
+			anar |= ADVERTISE_10HALF | ADVERTISE_10FULL;
+		} else if (speed == SPEED_100) {
+			bmcr = BMCR_SPEED100;
+			anar |= ADVERTISE_100HALF | ADVERTISE_100FULL;
+		} else {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if (duplex == DUPLEX_FULL)
+			bmcr |= BMCR_FULLDPLX;
+	} else {
+		if (speed == SPEED_10) {
+			if (duplex == DUPLEX_FULL)
+				anar |= ADVERTISE_10HALF | ADVERTISE_10FULL;
+			else
+				anar |= ADVERTISE_10HALF;
+		} else if (speed == SPEED_100) {
+			if (duplex == DUPLEX_FULL) {
+				anar |= ADVERTISE_10HALF | ADVERTISE_10FULL;
+				anar |= ADVERTISE_100HALF | ADVERTISE_100FULL;
+			} else {
+				anar |= ADVERTISE_10HALF;
+				anar |= ADVERTISE_100HALF;
+			}
+		} else {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
+	}
+
+	r8152_mdio_write(tp, MII_ADVERTISE, anar);
+	r8152_mdio_write(tp, MII_BMCR, bmcr);
+
+out:
+	schedule_delayed_work(&tp->schedule, 5 * HZ);
+
+	return ret;
+}
+
+static void rtl8152_down(struct r8152 *tp)
+{
+	u32	ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
+	ocp_data &= ~POWER_CUT;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
+
+	r8152b_disable_aldps(tp);
+	r8152b_enter_oob(tp);
+	r8152b_enable_aldps(tp);
+}
+
+static void set_carrier(struct r8152 *tp)
+{
+	struct net_device *netdev = tp->netdev;
+	u8 speed;
+
+	speed = rtl8152_get_speed(tp);
+
+	if (speed & LINK_STATUS) {
+		if (!(tp->speed & LINK_STATUS)) {
+			rtl8152_enable(tp);
+			set_bit(RTL8152_SET_RX_MODE, &tp->flags);
+			netif_carrier_on(netdev);
+		}
+	} else {
+		if (tp->speed & LINK_STATUS) {
+			netif_carrier_off(netdev);
+			rtl8152_disable(tp);
+		}
+	}
+	tp->speed = speed;
+}
+
+static void rtl_work_func_t(struct work_struct *work)
+{
+	struct r8152 *tp = container_of(work, struct r8152, schedule.work);
+
+	if (!test_bit(WORK_ENABLE, &tp->flags))
+		goto out1;
+
+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+		goto out1;
+
+	set_carrier(tp);
+
+	if (test_bit(RTL8152_SET_RX_MODE, &tp->flags))
+		_rtl8152_set_rx_mode(tp->netdev);
+
+	schedule_delayed_work(&tp->schedule, HZ);
+
+out1:
+	return;
+}
+
+static int rtl8152_open(struct net_device *netdev)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	int res = 0;
+
+	tp->speed = rtl8152_get_speed(tp);
+	if (tp->speed & LINK_STATUS) {
+		res = rtl8152_enable(tp);
+		if (res) {
+			if (res == -ENODEV)
+				netif_device_detach(tp->netdev);
+
+			netif_err(tp, ifup, netdev,
+				  "rtl8152_open failed: %d\n", res);
+			return res;
+		}
+
+		netif_carrier_on(netdev);
+	} else {
+		netif_stop_queue(netdev);
+		netif_carrier_off(netdev);
+	}
+
+	rtl8152_set_speed(tp, AUTONEG_ENABLE, SPEED_100, DUPLEX_FULL);
+	netif_start_queue(netdev);
+	set_bit(WORK_ENABLE, &tp->flags);
+	schedule_delayed_work(&tp->schedule, 0);
+
+	return res;
+}
+
+static int rtl8152_close(struct net_device *netdev)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	int res = 0;
+
+	clear_bit(WORK_ENABLE, &tp->flags);
+	cancel_delayed_work_sync(&tp->schedule);
+	netif_stop_queue(netdev);
+	rtl8152_disable(tp);
+
+	return res;
+}
+
+static void rtl_clear_bp(struct r8152 *tp)
+{
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_0, 0);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_2, 0);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_4, 0);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_6, 0);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_0, 0);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_2, 0);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_4, 0);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_6, 0);
+	mdelay(3);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_BA, 0);
+	ocp_write_word(tp, MCU_TYPE_USB, USB_BP_BA, 0);
+}
+
+static void r8152b_enable_eee(struct r8152 *tp)
+{
+	u32	ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
+	ocp_data |= EEE_RX_EN | EEE_TX_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data);
+	ocp_reg_write(tp, OCP_EEE_CONFIG1, RG_TXLPI_MSK_HFDUP | RG_MATCLR_EN |
+					   EEE_10_CAP | EEE_NWAY_EN |
+					   TX_QUIET_EN | RX_QUIET_EN |
+					   SDRISETIME | RG_RXLPI_MSK_HFDUP |
+					   SDFALLTIME);
+	ocp_reg_write(tp, OCP_EEE_CONFIG2, RG_LPIHYS_NUM | RG_DACQUIET_EN |
+					   RG_LDVQUIET_EN | RG_CKRSEL |
+					   RG_EEEPRG_EN);
+	ocp_reg_write(tp, OCP_EEE_CONFIG3, FST_SNR_EYE_R | RG_LFS_SEL | MSK_PH);
+	ocp_reg_write(tp, OCP_EEE_AR, FUN_ADDR | DEVICE_ADDR);
+	ocp_reg_write(tp, OCP_EEE_DATA, EEE_ADDR);
+	ocp_reg_write(tp, OCP_EEE_AR, FUN_DATA | DEVICE_ADDR);
+	ocp_reg_write(tp, OCP_EEE_DATA, EEE_DATA);
+	ocp_reg_write(tp, OCP_EEE_AR, 0x0000);
+}
+
+static void r8152b_enable_fc(struct r8152 *tp)
+{
+	u16 anar;
+
+	anar = r8152_mdio_read(tp, MII_ADVERTISE);
+	anar |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+	r8152_mdio_write(tp, MII_ADVERTISE, anar);
+}
+
+static void r8152b_hw_phy_cfg(struct r8152 *tp)
+{
+	r8152_mdio_write(tp, MII_BMCR, BMCR_ANENABLE);
+	r8152b_disable_aldps(tp);
+}
+
+static void r8152b_init(struct r8152 *tp)
+{
+	u32	ocp_data;
+	int	i;
+
+	rtl_clear_bp(tp);
+
+	if (tp->version == RTL_VER_01) {
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
+		ocp_data &= ~LED_MODE_MASK;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data);
+	}
+
+	r8152b_hw_phy_cfg(tp);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
+	ocp_data &= ~POWER_CUT;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS);
+	ocp_data &= ~RWSUME_INDICATE;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data);
+
+	r8152b_exit_oob(tp);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
+	ocp_data |= TX_10M_IDLE_EN | PFM_PWM_SWITCH;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL);
+	ocp_data &= ~MCU_CLK_RATIO_MASK;
+	ocp_data |= MCU_CLK_RATIO | D3_CLK_GATED_EN;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ocp_data);
+	ocp_data = GPHY_STS_MSK | SPEED_DOWN_MSK |
+		   SPDWN_RXDV_MSK | SPDWN_LINKCHG_MSK;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_GPHY_INTR_IMR, ocp_data);
+
+	r8152b_enable_eee(tp);
+	r8152b_enable_aldps(tp);
+	r8152b_enable_fc(tp);
+
+	r8152_mdio_write(tp, MII_BMCR, BMCR_RESET | BMCR_ANENABLE |
+				       BMCR_ANRESTART);
+	for (i = 0; i < 100; i++) {
+		udelay(100);
+		if (!(r8152_mdio_read(tp, MII_BMCR) & BMCR_RESET))
+			break;
+	}
+
+	/* disable rx aggregation */
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
+	ocp_data |= RX_AGG_DISABLE;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+}
+
+static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct r8152 *tp = usb_get_intfdata(intf);
+
+	netif_device_detach(tp->netdev);
+
+	if (netif_running(tp->netdev)) {
+		clear_bit(WORK_ENABLE, &tp->flags);
+		cancel_delayed_work_sync(&tp->schedule);
+	}
+
+	rtl8152_down(tp);
+
+	return 0;
+}
+
+static int rtl8152_resume(struct usb_interface *intf)
+{
+	struct r8152 *tp = usb_get_intfdata(intf);
+
+	r8152b_init(tp);
+	netif_device_attach(tp->netdev);
+	if (netif_running(tp->netdev)) {
+		rtl8152_enable(tp);
+		set_bit(WORK_ENABLE, &tp->flags);
+		set_bit(RTL8152_SET_RX_MODE, &tp->flags);
+		schedule_delayed_work(&tp->schedule, 0);
+	}
+
+	return 0;
+}
+
+static void rtl8152_get_drvinfo(struct net_device *netdev,
+				struct ethtool_drvinfo *info)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	strncpy(info->driver, MODULENAME, ETHTOOL_BUSINFO_LEN);
+	strncpy(info->version, DRIVER_VERSION, ETHTOOL_BUSINFO_LEN);
+	usb_make_path(tp->udev, info->bus_info, sizeof(info->bus_info));
+}
+
+static
+int rtl8152_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	if (!tp->mii.mdio_read)
+		return -EOPNOTSUPP;
+
+	return mii_ethtool_gset(&tp->mii, cmd);
+}
+
+static int rtl8152_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct r8152 *tp = netdev_priv(dev);
+
+	return rtl8152_set_speed(tp, cmd->autoneg, cmd->speed, cmd->duplex);
+}
+
+static struct ethtool_ops ops = {
+	.get_drvinfo = rtl8152_get_drvinfo,
+	.get_settings = rtl8152_get_settings,
+	.set_settings = rtl8152_set_settings,
+	.get_link = ethtool_op_get_link,
+};
+
+static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	struct mii_ioctl_data *data = if_mii(rq);
+	int res = 0;
+
+	switch (cmd) {
+	case SIOCGMIIPHY:
+		data->phy_id = R8152_PHY_ID; /* Internal PHY */
+		break;
+
+	case SIOCGMIIREG:
+		data->val_out = r8152_mdio_read(tp, data->reg_num);
+		break;
+
+	case SIOCSMIIREG:
+		if (!capable(CAP_NET_ADMIN)) {
+			res = -EPERM;
+			break;
+		}
+		r8152_mdio_write(tp, data->reg_num, data->val_in);
+		break;
+
+	default:
+		res = -EOPNOTSUPP;
+	}
+
+	return res;
+}
+
+static const struct net_device_ops rtl8152_netdev_ops = {
+	.ndo_open		= rtl8152_open,
+	.ndo_stop		= rtl8152_close,
+	.ndo_do_ioctl		= rtl8152_ioctl,
+	.ndo_start_xmit		= rtl8152_start_xmit,
+	.ndo_tx_timeout		= rtl8152_tx_timeout,
+	.ndo_set_rx_mode	= rtl8152_set_rx_mode,
+	.ndo_set_mac_address	= rtl8152_set_mac_address,
+
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+static void r8152b_get_version(struct r8152 *tp)
+{
+	u32	ocp_data;
+	u16	version;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR1);
+	version = (u16)(ocp_data & VERSION_MASK);
+
+	switch (version) {
+	case 0x4c00:
+		tp->version = RTL_VER_01;
+		break;
+	case 0x4c10:
+		tp->version = RTL_VER_02;
+		break;
+	default:
+		netif_info(tp, probe, tp->netdev,
+			   "Unknown version 0x%04x\n", version);
+		break;
+	}
+}
+
+static int rtl8152_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct r8152 *tp;
+	struct net_device *netdev;
+
+	if (udev->actconfig->desc.bConfigurationValue != 1) {
+		usb_driver_set_configuration(udev, 1);
+		return -ENODEV;
+	}
+
+	netdev = alloc_etherdev(sizeof(struct r8152));
+	if (!netdev) {
+		dev_err(&intf->dev, "Out of memory");
+		return -ENOMEM;
+	}
+
+	tp = netdev_priv(netdev);
+	tp->msg_enable = 0x7FFF;
+
+	tasklet_init(&tp->tl, rx_fixup, (unsigned long)tp);
+	INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t);
+
+	tp->udev = udev;
+	tp->netdev = netdev;
+	netdev->netdev_ops = &rtl8152_netdev_ops;
+	netdev->watchdog_timeo = RTL8152_TX_TIMEOUT;
+	netdev->features &= ~NETIF_F_IP_CSUM;
+	SET_ETHTOOL_OPS(netdev, &ops);
+	tp->speed = 0;
+
+	tp->mii.dev = netdev;
+	tp->mii.mdio_read = read_mii_word;
+	tp->mii.mdio_write = write_mii_word;
+	tp->mii.phy_id_mask = 0x3f;
+	tp->mii.reg_num_mask = 0x1f;
+	tp->mii.phy_id = R8152_PHY_ID;
+	tp->mii.supports_gmii = 0;
+
+	r8152b_get_version(tp);
+	r8152b_init(tp);
+	set_ethernet_addr(tp);
+
+	if (!alloc_all_urbs(tp)) {
+		netif_err(tp, probe, netdev, "out of memory");
+		goto out;
+	}
+
+	tp->rx_skb = netdev_alloc_skb(netdev,
+			RTL8152_RMS + sizeof(struct rx_desc));
+	if (!tp->rx_skb)
+		goto out1;
+
+	usb_set_intfdata(intf, tp);
+	SET_NETDEV_DEV(netdev, &intf->dev);
+
+
+	if (register_netdev(netdev) != 0) {
+		netif_err(tp, probe, netdev, "couldn't register the device");
+		goto out2;
+	}
+
+	netif_info(tp, probe, netdev, "%s", DRIVER_VERSION);
+
+	return 0;
+
+out2:
+	usb_set_intfdata(intf, NULL);
+	dev_kfree_skb(tp->rx_skb);
+out1:
+	free_all_urbs(tp);
+out:
+	free_netdev(netdev);
+	return -EIO;
+}
+
+static void rtl8152_unload(struct r8152 *tp)
+{
+	u32	ocp_data;
+
+	if (tp->version != RTL_VER_01) {
+		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
+		ocp_data |= POWER_CUT;
+		ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
+	}
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS);
+	ocp_data &= ~RWSUME_INDICATE;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data);
+}
+
+static void rtl8152_disconnect(struct usb_interface *intf)
+{
+	struct r8152 *tp = usb_get_intfdata(intf);
+
+	usb_set_intfdata(intf, NULL);
+	if (tp) {
+		set_bit(RTL8152_UNPLUG, &tp->flags);
+		tasklet_kill(&tp->tl);
+		unregister_netdev(tp->netdev);
+		rtl8152_unload(tp);
+		free_all_urbs(tp);
+		if (tp->rx_skb)
+			dev_kfree_skb(tp->rx_skb);
+		free_netdev(tp->netdev);
+	}
+}
+
+/* table of devices that work with this driver */
+static struct usb_device_id rtl8152_table[] = {
+	{USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8152)},
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, rtl8152_table);
+
+static struct usb_driver rtl8152_driver = {
+	.name =		MODULENAME,
+	.probe =	rtl8152_probe,
+	.disconnect =	rtl8152_disconnect,
+	.id_table =	rtl8152_table,
+	.suspend =	rtl8152_suspend,
+	.resume =	rtl8152_resume
+};
+
+static int __init usb_rtl8152_init(void)
+{
+	return usb_register(&rtl8152_driver);
+}
+
+static void __exit usb_rtl8152_exit(void)
+{
+	usb_deregister(&rtl8152_driver);
+}
+
+module_init(usb_rtl8152_init);
+module_exit(usb_rtl8152_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");