Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (272 commits)
  Fix soc_common PCMCIA configuration
  ARM: 5827/1: SA1100: h3100/h3600: emit messages on failed gpio_request
  ARM: 5826/1: SA1100: h3100/h3600: always build htc-egpio driver
  ARM: 5825/1: SA1100: h3600: update defconfig
  ARM: 5824/1: SA1100: reuse h3600 PCMCIA driver on h3100
  ARM: 5823/1: SA1100: h3100/h3600: add support for gpio-keys
  ARM: 5822/1: SA1100: h3100/h3600: clean up #includes
  ARM: 5821/1: SA1100: h3100/h3600: revise copyright boilerplates
  ARM: 5820/1: SA1100: h3100/h3600: split h3600.c
  ARM: 5819/1: SA1100: h3100/h3600: merge h3600.h and h3600_gpio.h into h3xxx.h
  ARM: 5818/1: SA1100: h3100/h3600: drop old GPIO definitions
  ARM: 5817/1: SA1100: h3100/h3600: configure all unused gpios as inputs
  ARM: 5816/1: SA1100: h3600: remove IRQ_GPIO_* definitions
  ARM: 5815/1: SA1100: h3100/h3600: remove now unused assign_h3600_egpio handlers
  ARM: 5814/1: SA1100: h3100/h3600: convert all users of assign_h3600_egpio to gpiolib
  ARM: 5813/1: SA1100: h3100/h3600: add htc-egpio driver
  ARM: 5812/1: SA1100: h3100/h3600: separate machine-specific LCD helpers
  ARM: 5811/2: pcmcia: convert sa1100_h3600 driver to gpiolib
  ARM: 5799/1: SA1100: h3600: stop setting direction for LCD pins
  ARM: 5798/1: SA1100: h3600: remove unused cruft from h3600.h
  ...

31 files changed, 751 insertions, 389 deletions

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index b401dadad4a..eb140ff38c2 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -54,7 +54,7 @@ config DW_DMAC
 
 config AT_HDMAC
 	tristate "Atmel AHB DMA support"
-	depends on ARCH_AT91SAM9RL
+	depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
 	select DMA_ENGINE
 	help
 	  Support the Atmel AHB DMA controller.  This can be integrated in
diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c
index 5d91362e306..1f7c10f6b7f 100644
--- a/drivers/leds/leds-locomo.c
+++ b/drivers/leds/leds-locomo.c
@@ -44,7 +44,7 @@ static void locomoled_brightness_set1(struct led_classdev *led_cdev,
 
 static struct led_classdev locomo_led0 = {
 	.name			= "locomo:amber:charge",
-	.default_trigger	= "sharpsl-charge",
+	.default_trigger	= "main-battery-charging",
 	.brightness_set		= locomoled_brightness_set0,
 };
 
diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c
index 57271cb3b31..84815f9ef63 100644
--- a/drivers/mfd/mcp-core.c
+++ b/drivers/mfd/mcp-core.c
@@ -17,11 +17,11 @@
 #include <linux/device.h>
 #include <linux/slab.h>
 #include <linux/string.h>
+#include <linux/mfd/mcp.h>
 
 #include <mach/dma.h>
 #include <asm/system.h>
 
-#include "mcp.h"
 
 #define to_mcp(d)		container_of(d, struct mcp, attached_device)
 #define to_mcp_driver(d)	container_of(d, struct mcp_driver, drv)
diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
index 62b32dabf62..25842723272 100644
--- a/drivers/mfd/mcp-sa11x0.c
+++ b/drivers/mfd/mcp-sa11x0.c
@@ -19,6 +19,7 @@
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
+#include <linux/mfd/mcp.h>
 
 #include <mach/dma.h>
 #include <mach/hardware.h>
@@ -28,7 +29,6 @@
 
 #include <mach/assabet.h>
 
-#include "mcp.h"
 
 struct mcp_sa11x0 {
 	u32	mccr0;
@@ -163,6 +163,7 @@ static int mcp_sa11x0_probe(struct platform_device *pdev)
 	mcp->dma_audio_wr	= DMA_Ser4MCP0Wr;
 	mcp->dma_telco_rd	= DMA_Ser4MCP1Rd;
 	mcp->dma_telco_wr	= DMA_Ser4MCP1Wr;
+	mcp->gpio_base		= data->gpio_base;
 
 	platform_set_drvdata(pdev, mcp);
 
diff --git a/drivers/mfd/mcp.h b/drivers/mfd/mcp.h
deleted file mode 100644
index c093a93b880..00000000000
--- a/drivers/mfd/mcp.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- *  linux/drivers/mfd/mcp.h
- *
- *  Copyright (C) 2001 Russell King, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- */
-#ifndef MCP_H
-#define MCP_H
-
-struct mcp_ops;
-
-struct mcp {
-	struct module	*owner;
-	struct mcp_ops	*ops;
-	spinlock_t	lock;
-	int		use_count;
-	unsigned int	sclk_rate;
-	unsigned int	rw_timeout;
-	dma_device_t	dma_audio_rd;
-	dma_device_t	dma_audio_wr;
-	dma_device_t	dma_telco_rd;
-	dma_device_t	dma_telco_wr;
-	struct device	attached_device;
-};
-
-struct mcp_ops {
-	void		(*set_telecom_divisor)(struct mcp *, unsigned int);
-	void		(*set_audio_divisor)(struct mcp *, unsigned int);
-	void		(*reg_write)(struct mcp *, unsigned int, unsigned int);
-	unsigned int	(*reg_read)(struct mcp *, unsigned int);
-	void		(*enable)(struct mcp *);
-	void		(*disable)(struct mcp *);
-};
-
-void mcp_set_telecom_divisor(struct mcp *, unsigned int);
-void mcp_set_audio_divisor(struct mcp *, unsigned int);
-void mcp_reg_write(struct mcp *, unsigned int, unsigned int);
-unsigned int mcp_reg_read(struct mcp *, unsigned int);
-void mcp_enable(struct mcp *);
-void mcp_disable(struct mcp *);
-#define mcp_get_sclk_rate(mcp)	((mcp)->sclk_rate)
-
-struct mcp *mcp_host_alloc(struct device *, size_t);
-int mcp_host_register(struct mcp *);
-void mcp_host_unregister(struct mcp *);
-
-struct mcp_driver {
-	struct device_driver drv;
-	int (*probe)(struct mcp *);
-	void (*remove)(struct mcp *);
-	int (*suspend)(struct mcp *, pm_message_t);
-	int (*resume)(struct mcp *);
-};
-
-int mcp_driver_register(struct mcp_driver *);
-void mcp_driver_unregister(struct mcp_driver *);
-
-#define mcp_get_drvdata(mcp)	dev_get_drvdata(&(mcp)->attached_device)
-#define mcp_set_drvdata(mcp,d)	dev_set_drvdata(&(mcp)->attached_device, d)
-
-#define mcp_priv(mcp)		((void *)((mcp)+1))
-
-#endif
diff --git a/drivers/mfd/ucb1x00-assabet.c b/drivers/mfd/ucb1x00-assabet.c
index 86fed4870f9..cea9da60850 100644
--- a/drivers/mfd/ucb1x00-assabet.c
+++ b/drivers/mfd/ucb1x00-assabet.c
@@ -14,10 +14,10 @@
 #include <linux/fs.h>
 #include <linux/proc_fs.h>
 #include <linux/device.h>
+#include <linux/mfd/ucb1x00.h>
 
 #include <mach/dma.h>
 
-#include "ucb1x00.h"
 
 #define UCB1X00_ATTR(name,input)\
 static ssize_t name##_show(struct device *dev, struct device_attribute *attr, \
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index 60c3988f3cf..252b74188ec 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -25,12 +25,12 @@
 #include <linux/interrupt.h>
 #include <linux/device.h>
 #include <linux/mutex.h>
+#include <linux/mfd/ucb1x00.h>
+#include <linux/gpio.h>
 
 #include <mach/dma.h>
 #include <mach/hardware.h>
 
-#include "ucb1x00.h"
-
 static DEFINE_MUTEX(ucb1x00_mutex);
 static LIST_HEAD(ucb1x00_drivers);
 static LIST_HEAD(ucb1x00_devices);
@@ -108,6 +108,60 @@ unsigned int ucb1x00_io_read(struct ucb1x00 *ucb)
 	return ucb1x00_reg_read(ucb, UCB_IO_DATA);
 }
 
+static void ucb1x00_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ucb->io_lock, flags);
+	if (value)
+		ucb->io_out |= 1 << offset;
+	else
+		ucb->io_out &= ~(1 << offset);
+
+	ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+	spin_unlock_irqrestore(&ucb->io_lock, flags);
+}
+
+static int ucb1x00_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+	return ucb1x00_reg_read(ucb, UCB_IO_DATA) & (1 << offset);
+}
+
+static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ucb->io_lock, flags);
+	ucb->io_dir &= ~(1 << offset);
+	ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+	spin_unlock_irqrestore(&ucb->io_lock, flags);
+
+	return 0;
+}
+
+static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
+		, int value)
+{
+	struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ucb->io_lock, flags);
+	ucb->io_dir |= (1 << offset);
+	ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+
+	if (value)
+		ucb->io_out |= 1 << offset;
+	else
+		ucb->io_out &= ~(1 << offset);
+	ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+	spin_unlock_irqrestore(&ucb->io_lock, flags);
+
+	return 0;
+}
+
 /*
  * UCB1300 data sheet says we must:
  *  1. enable ADC	=> 5us (including reference startup time)
@@ -476,6 +530,7 @@ static int ucb1x00_probe(struct mcp *mcp)
 	struct ucb1x00_driver *drv;
 	unsigned int id;
 	int ret = -ENODEV;
+	int temp;
 
 	mcp_enable(mcp);
 	id = mcp_reg_read(mcp, UCB_ID);
@@ -508,12 +563,27 @@ static int ucb1x00_probe(struct mcp *mcp)
 		goto err_free;
 	}
 
+	ucb->gpio.base = -1;
+	if (mcp->gpio_base != 0) {
+		ucb->gpio.label = dev_name(&ucb->dev);
+		ucb->gpio.base = mcp->gpio_base;
+		ucb->gpio.ngpio = 10;
+		ucb->gpio.set = ucb1x00_gpio_set;
+		ucb->gpio.get = ucb1x00_gpio_get;
+		ucb->gpio.direction_input = ucb1x00_gpio_direction_input;
+		ucb->gpio.direction_output = ucb1x00_gpio_direction_output;
+		ret = gpiochip_add(&ucb->gpio);
+		if (ret)
+			goto err_free;
+	} else
+		dev_info(&ucb->dev, "gpio_base not set so no gpiolib support");
+
 	ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING,
 			  "UCB1x00", ucb);
 	if (ret) {
 		printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n",
 			ucb->irq, ret);
-		goto err_free;
+		goto err_gpio;
 	}
 
 	mcp_set_drvdata(mcp, ucb);
@@ -522,6 +592,7 @@ static int ucb1x00_probe(struct mcp *mcp)
 	if (ret)
 		goto err_irq;
 
+
 	INIT_LIST_HEAD(&ucb->devs);
 	mutex_lock(&ucb1x00_mutex);
 	list_add(&ucb->node, &ucb1x00_devices);
@@ -529,10 +600,14 @@ static int ucb1x00_probe(struct mcp *mcp)
 		ucb1x00_add_dev(ucb, drv);
 	}
 	mutex_unlock(&ucb1x00_mutex);
+
 	goto out;
 
  err_irq:
 	free_irq(ucb->irq, ucb);
+ err_gpio:
+	if (ucb->gpio.base != -1)
+		temp = gpiochip_remove(&ucb->gpio);
  err_free:
 	kfree(ucb);
  err_disable:
@@ -545,6 +620,7 @@ static void ucb1x00_remove(struct mcp *mcp)
 {
 	struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
 	struct list_head *l, *n;
+	int ret;
 
 	mutex_lock(&ucb1x00_mutex);
 	list_del(&ucb->node);
@@ -554,6 +630,12 @@ static void ucb1x00_remove(struct mcp *mcp)
 	}
 	mutex_unlock(&ucb1x00_mutex);
 
+	if (ucb->gpio.base != -1) {
+		ret = gpiochip_remove(&ucb->gpio);
+		if (ret)
+			dev_err(&ucb->dev, "Can't remove gpio chip: %d\n", ret);
+	}
+
 	free_irq(ucb->irq, ucb);
 	device_unregister(&ucb->dev);
 }
@@ -604,6 +686,7 @@ static int ucb1x00_resume(struct mcp *mcp)
 	struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
 	struct ucb1x00_dev *dev;
 
+	ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
 	mutex_lock(&ucb1x00_mutex);
 	list_for_each_entry(dev, &ucb->devs, dev_node) {
 		if (dev->drv->resume)
diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
index 61b7d3eb9a2..000cb414a78 100644
--- a/drivers/mfd/ucb1x00-ts.c
+++ b/drivers/mfd/ucb1x00-ts.c
@@ -30,12 +30,12 @@
 #include <linux/freezer.h>
 #include <linux/slab.h>
 #include <linux/kthread.h>
+#include <linux/mfd/ucb1x00.h>
 
 #include <mach/dma.h>
 #include <mach/collie.h>
 #include <asm/mach-types.h>
 
-#include "ucb1x00.h"
 
 
 struct ucb1x00_ts {
diff --git a/drivers/mfd/ucb1x00.h b/drivers/mfd/ucb1x00.h
deleted file mode 100644
index a8ad8a0ed5d..00000000000
--- a/drivers/mfd/ucb1x00.h
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- *  linux/drivers/mfd/ucb1x00.h
- *
- *  Copyright (C) 2001 Russell King, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- */
-#ifndef UCB1200_H
-#define UCB1200_H
-
-#define UCB_IO_DATA	0x00
-#define UCB_IO_DIR	0x01
-
-#define UCB_IO_0		(1 << 0)
-#define UCB_IO_1		(1 << 1)
-#define UCB_IO_2		(1 << 2)
-#define UCB_IO_3		(1 << 3)
-#define UCB_IO_4		(1 << 4)
-#define UCB_IO_5		(1 << 5)
-#define UCB_IO_6		(1 << 6)
-#define UCB_IO_7		(1 << 7)
-#define UCB_IO_8		(1 << 8)
-#define UCB_IO_9		(1 << 9)
-
-#define UCB_IE_RIS	0x02
-#define UCB_IE_FAL	0x03
-#define UCB_IE_STATUS	0x04
-#define UCB_IE_CLEAR	0x04
-#define UCB_IE_ADC		(1 << 11)
-#define UCB_IE_TSPX		(1 << 12)
-#define UCB_IE_TSMX		(1 << 13)
-#define UCB_IE_TCLIP		(1 << 14)
-#define UCB_IE_ACLIP		(1 << 15)
-
-#define UCB_IRQ_TSPX		12
-
-#define UCB_TC_A	0x05
-#define UCB_TC_A_LOOP		(1 << 7)	/* UCB1200 */
-#define UCB_TC_A_AMPL		(1 << 7)	/* UCB1300 */
-
-#define UCB_TC_B	0x06
-#define UCB_TC_B_VOICE_ENA	(1 << 3)
-#define UCB_TC_B_CLIP		(1 << 4)
-#define UCB_TC_B_ATT		(1 << 6)
-#define UCB_TC_B_SIDE_ENA	(1 << 11)
-#define UCB_TC_B_MUTE		(1 << 13)
-#define UCB_TC_B_IN_ENA		(1 << 14)
-#define UCB_TC_B_OUT_ENA	(1 << 15)
-
-#define UCB_AC_A	0x07
-#define UCB_AC_B	0x08
-#define UCB_AC_B_LOOP		(1 << 8)
-#define UCB_AC_B_MUTE		(1 << 13)
-#define UCB_AC_B_IN_ENA		(1 << 14)
-#define UCB_AC_B_OUT_ENA	(1 << 15)
-
-#define UCB_TS_CR	0x09
-#define UCB_TS_CR_TSMX_POW	(1 << 0)
-#define UCB_TS_CR_TSPX_POW	(1 << 1)
-#define UCB_TS_CR_TSMY_POW	(1 << 2)
-#define UCB_TS_CR_TSPY_POW	(1 << 3)
-#define UCB_TS_CR_TSMX_GND	(1 << 4)
-#define UCB_TS_CR_TSPX_GND	(1 << 5)
-#define UCB_TS_CR_TSMY_GND	(1 << 6)
-#define UCB_TS_CR_TSPY_GND	(1 << 7)
-#define UCB_TS_CR_MODE_INT	(0 << 8)
-#define UCB_TS_CR_MODE_PRES	(1 << 8)
-#define UCB_TS_CR_MODE_POS	(2 << 8)
-#define UCB_TS_CR_BIAS_ENA	(1 << 11)
-#define UCB_TS_CR_TSPX_LOW	(1 << 12)
-#define UCB_TS_CR_TSMX_LOW	(1 << 13)
-
-#define UCB_ADC_CR	0x0a
-#define UCB_ADC_SYNC_ENA	(1 << 0)
-#define UCB_ADC_VREFBYP_CON	(1 << 1)
-#define UCB_ADC_INP_TSPX	(0 << 2)
-#define UCB_ADC_INP_TSMX	(1 << 2)
-#define UCB_ADC_INP_TSPY	(2 << 2)
-#define UCB_ADC_INP_TSMY	(3 << 2)
-#define UCB_ADC_INP_AD0		(4 << 2)
-#define UCB_ADC_INP_AD1		(5 << 2)
-#define UCB_ADC_INP_AD2		(6 << 2)
-#define UCB_ADC_INP_AD3		(7 << 2)
-#define UCB_ADC_EXT_REF		(1 << 5)
-#define UCB_ADC_START		(1 << 7)
-#define UCB_ADC_ENA		(1 << 15)
-
-#define UCB_ADC_DATA	0x0b
-#define UCB_ADC_DAT_VAL		(1 << 15)
-#define UCB_ADC_DAT(x)		(((x) & 0x7fe0) >> 5)
-
-#define UCB_ID		0x0c
-#define UCB_ID_1200		0x1004
-#define UCB_ID_1300		0x1005
-#define UCB_ID_TC35143          0x9712
-
-#define UCB_MODE	0x0d
-#define UCB_MODE_DYN_VFLAG_ENA	(1 << 12)
-#define UCB_MODE_AUD_OFF_CAN	(1 << 13)
-
-#include "mcp.h"
-
-struct ucb1x00_irq {
-	void *devid;
-	void (*fn)(int, void *);
-};
-
-struct ucb1x00 {
-	spinlock_t		lock;
-	struct mcp		*mcp;
-	unsigned int		irq;
-	struct semaphore	adc_sem;
-	spinlock_t		io_lock;
-	u16			id;
-	u16			io_dir;
-	u16			io_out;
-	u16			adc_cr;
-	u16			irq_fal_enbl;
-	u16			irq_ris_enbl;
-	struct ucb1x00_irq	irq_handler[16];
-	struct device		dev;
-	struct list_head	node;
-	struct list_head	devs;
-};
-
-struct ucb1x00_driver;
-
-struct ucb1x00_dev {
-	struct list_head	dev_node;
-	struct list_head	drv_node;
-	struct ucb1x00		*ucb;
-	struct ucb1x00_driver	*drv;
-	void			*priv;
-};
-
-struct ucb1x00_driver {
-	struct list_head	node;
-	struct list_head	devs;
-	int	(*add)(struct ucb1x00_dev *dev);
-	void	(*remove)(struct ucb1x00_dev *dev);
-	int	(*suspend)(struct ucb1x00_dev *dev, pm_message_t state);
-	int	(*resume)(struct ucb1x00_dev *dev);
-};
-
-#define classdev_to_ucb1x00(cd)	container_of(cd, struct ucb1x00, dev)
-
-int ucb1x00_register_driver(struct ucb1x00_driver *);
-void ucb1x00_unregister_driver(struct ucb1x00_driver *);
-
-/**
- *	ucb1x00_clkrate - return the UCB1x00 SIB clock rate
- *	@ucb: UCB1x00 structure describing chip
- *
- *	Return the SIB clock rate in Hz.
- */
-static inline unsigned int ucb1x00_clkrate(struct ucb1x00 *ucb)
-{
-	return mcp_get_sclk_rate(ucb->mcp);
-}
-
-/**
- *	ucb1x00_enable - enable the UCB1x00 SIB clock
- *	@ucb: UCB1x00 structure describing chip
- *
- *	Enable the SIB clock.  This can be called multiple times.
- */
-static inline void ucb1x00_enable(struct ucb1x00 *ucb)
-{
-	mcp_enable(ucb->mcp);
-}
-
-/**
- *	ucb1x00_disable - disable the UCB1x00 SIB clock
- *	@ucb: UCB1x00 structure describing chip
- *
- *	Disable the SIB clock.  The SIB clock will only be disabled
- *	when the number of ucb1x00_enable calls match the number of
- *	ucb1x00_disable calls.
- */
-static inline void ucb1x00_disable(struct ucb1x00 *ucb)
-{
-	mcp_disable(ucb->mcp);
-}
-
-/**
- *	ucb1x00_reg_write - write a UCB1x00 register
- *	@ucb: UCB1x00 structure describing chip
- *	@reg: UCB1x00 4-bit register index to write
- *	@val: UCB1x00 16-bit value to write
- *
- *	Write the UCB1x00 register @reg with value @val.  The SIB
- *	clock must be running for this function to return.
- */
-static inline void ucb1x00_reg_write(struct ucb1x00 *ucb, unsigned int reg, unsigned int val)
-{
-	mcp_reg_write(ucb->mcp, reg, val);
-}
-
-/**
- *	ucb1x00_reg_read - read a UCB1x00 register
- *	@ucb: UCB1x00 structure describing chip
- *	@reg: UCB1x00 4-bit register index to write
- *
- *	Read the UCB1x00 register @reg and return its value.  The SIB
- *	clock must be running for this function to return.
- */
-static inline unsigned int ucb1x00_reg_read(struct ucb1x00 *ucb, unsigned int reg)
-{
-	return mcp_reg_read(ucb->mcp, reg);
-}
-/**
- *	ucb1x00_set_audio_divisor - 
- *	@ucb: UCB1x00 structure describing chip
- *	@div: SIB clock divisor
- */
-static inline void ucb1x00_set_audio_divisor(struct ucb1x00 *ucb, unsigned int div)
-{
-	mcp_set_audio_divisor(ucb->mcp, div);
-}
-
-/**
- *	ucb1x00_set_telecom_divisor -
- *	@ucb: UCB1x00 structure describing chip
- *	@div: SIB clock divisor
- */
-static inline void ucb1x00_set_telecom_divisor(struct ucb1x00 *ucb, unsigned int div)
-{
-	mcp_set_telecom_divisor(ucb->mcp, div);
-}
-
-void ucb1x00_io_set_dir(struct ucb1x00 *ucb, unsigned int, unsigned int);
-void ucb1x00_io_write(struct ucb1x00 *ucb, unsigned int, unsigned int);
-unsigned int ucb1x00_io_read(struct ucb1x00 *ucb);
-
-#define UCB_NOSYNC	(0)
-#define UCB_SYNC	(1)
-
-unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync);
-void ucb1x00_adc_enable(struct ucb1x00 *ucb);
-void ucb1x00_adc_disable(struct ucb1x00 *ucb);
-
-/*
- * Which edges of the IRQ do you want to control today?
- */
-#define UCB_RISING	(1 << 0)
-#define UCB_FALLING	(1 << 1)
-
-int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid);
-void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges);
-void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges);
-int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid);
-
-#endif
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 705a5894a6b..90d168ad03b 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -56,7 +56,7 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
 				clk = 255;
 			host->cclk = host->mclk / (2 * (clk + 1));
 		}
-		if (host->hw_designer == 0x80)
+		if (host->hw_designer == AMBA_VENDOR_ST)
 			clk |= MCI_FCEN; /* Bug fix in ST IP block */
 		clk |= MCI_CLK_ENABLE;
 		/* This hasn't proven to be worthwhile */
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 9fb480bb0e0..bb47ff465c0 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -43,6 +43,9 @@
 #define NR_SG	1
 #define CLKRT_OFF	(~0)
 
+#define mmc_has_26MHz()		(cpu_is_pxa300() || cpu_is_pxa310() \
+				|| cpu_is_pxa935())
+
 struct pxamci_host {
 	struct mmc_host		*mmc;
 	spinlock_t		lock;
@@ -457,7 +460,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 			clk_enable(host->clk);
 
 		if (ios->clock == 26000000) {
-			/* to support 26MHz on pxa300/pxa310 */
+			/* to support 26MHz */
 			host->clkrt = 7;
 		} else {
 			/* to handle (19.5MHz, 26MHz) */
@@ -608,8 +611,7 @@ static int pxamci_probe(struct platform_device *pdev)
 	 * Calculate minimum clock rate, rounding up.
 	 */
 	mmc->f_min = (host->clkrate + 63) / 64;
-	mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000
-							  : host->clkrate;
+	mmc->f_max = (mmc_has_26MHz()) ? 26000000 : host->clkrate;
 
 	pxamci_init_ocr(host);
 
@@ -618,7 +620,7 @@ static int pxamci_probe(struct platform_device *pdev)
 	if (!cpu_is_pxa25x()) {
 		mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
 		host->cmdat |= CMDAT_SDIO_INT_EN;
-		if (cpu_is_pxa300() || cpu_is_pxa310())
+		if (mmc_has_26MHz())
 			mmc->caps |= MMC_CAP_MMC_HIGHSPEED |
 				     MMC_CAP_SD_HIGHSPEED;
 	}
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 2fda0b61524..8f8e87b7ed6 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -358,7 +358,7 @@ endchoice
 
 config MTD_NAND_PXA3xx
 	tristate "Support for NAND flash devices on PXA3xx"
-	depends on MTD_NAND && PXA3xx
+	depends on MTD_NAND && (PXA3xx || ARCH_MMP)
 	help
 	  This enables the driver for the NAND flash device found on
 	  PXA3xx processors
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 6ea520ae241..1a5a0365c98 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -9,6 +9,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
@@ -22,7 +23,7 @@
 #include <linux/irq.h>
 
 #include <mach/dma.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/pxa3xx_nand.h>
 
 #define	CHIP_DELAY_TIMEOUT	(2 * HZ/10)
 
@@ -84,10 +85,6 @@
 #define NDCB0_CMD1_MASK		(0xff)
 #define NDCB0_ADDR_CYC_SHIFT	(16)
 
-/* dma-able I/O address for the NAND data and commands */
-#define NDCB0_DMA_ADDR		(0x43100048)
-#define NDDB_DMA_ADDR		(0x43100040)
-
 /* macros for registers read/write */
 #define nand_writel(info, off, val)	\
 	__raw_writel((val), (info)->mmio_base + (off))
@@ -123,6 +120,7 @@ struct pxa3xx_nand_info {
 
 	struct clk		*clk;
 	void __iomem		*mmio_base;
+	unsigned long		mmio_phys;
 
 	unsigned int 		buf_start;
 	unsigned int		buf_count;
@@ -228,13 +226,35 @@ static struct pxa3xx_nand_flash samsung512MbX16 = {
 	.chip_id	= 0x46ec,
 };
 
+static struct pxa3xx_nand_flash samsung2GbX8 = {
+	.timing		= &samsung512MbX16_timing,
+	.cmdset		= &smallpage_cmdset,
+	.page_per_block	= 64,
+	.page_size	= 2048,
+	.flash_width	= 8,
+	.dfc_width	= 8,
+	.num_blocks	= 2048,
+	.chip_id	= 0xdaec,
+};
+
+static struct pxa3xx_nand_flash samsung32GbX8 = {
+	.timing		= &samsung512MbX16_timing,
+	.cmdset		= &smallpage_cmdset,
+	.page_per_block	= 128,
+	.page_size	= 4096,
+	.flash_width	= 8,
+	.dfc_width	= 8,
+	.num_blocks	= 8192,
+	.chip_id	= 0xd7ec,
+};
+
 static struct pxa3xx_nand_timing micron_timing = {
 	.tCH	= 10,
 	.tCS	= 25,
 	.tWH	= 15,
 	.tWP	= 25,
 	.tRH	= 15,
-	.tRP	= 25,
+	.tRP	= 30,
 	.tR	= 25000,
 	.tWHR	= 60,
 	.tAR	= 10,
@@ -262,6 +282,28 @@ static struct pxa3xx_nand_flash micron1GbX16 = {
 	.chip_id	= 0xb12c,
 };
 
+static struct pxa3xx_nand_flash micron4GbX8 = {
+	.timing		= &micron_timing,
+	.cmdset		= &largepage_cmdset,
+	.page_per_block	= 64,
+	.page_size	= 2048,
+	.flash_width	= 8,
+	.dfc_width	= 8,
+	.num_blocks	= 4096,
+	.chip_id	= 0xdc2c,
+};
+
+static struct pxa3xx_nand_flash micron4GbX16 = {
+	.timing		= &micron_timing,
+	.cmdset		= &largepage_cmdset,
+	.page_per_block	= 64,
+	.page_size	= 2048,
+	.flash_width	= 16,
+	.dfc_width	= 16,
+	.num_blocks	= 4096,
+	.chip_id	= 0xcc2c,
+};
+
 static struct pxa3xx_nand_timing stm2GbX16_timing = {
 	.tCH = 10,
 	.tCS = 35,
@@ -287,8 +329,12 @@ static struct pxa3xx_nand_flash stm2GbX16 = {
 
 static struct pxa3xx_nand_flash *builtin_flash_types[] = {
 	&samsung512MbX16,
+	&samsung2GbX8,
+	&samsung32GbX8,
 	&micron1GbX8,
 	&micron1GbX16,
+	&micron4GbX8,
+	&micron4GbX16,
 	&stm2GbX16,
 };
 #endif /* CONFIG_MTD_NAND_PXA3xx_BUILTIN */
@@ -489,7 +535,7 @@ static int handle_data_pio(struct pxa3xx_nand_info *info)
 	switch (info->state) {
 	case STATE_PIO_WRITING:
 		__raw_writesl(info->mmio_base + NDDB, info->data_buff,
-				info->data_size << 2);
+				DIV_ROUND_UP(info->data_size, 4));
 
 		enable_int(info, NDSR_CS0_BBD | NDSR_CS0_CMDD);
 
@@ -501,7 +547,7 @@ static int handle_data_pio(struct pxa3xx_nand_info *info)
 		break;
 	case STATE_PIO_READING:
 		__raw_readsl(info->mmio_base + NDDB, info->data_buff,
-				info->data_size << 2);
+				DIV_ROUND_UP(info->data_size, 4));
 		break;
 	default:
 		printk(KERN_ERR "%s: invalid state %d\n", __func__,
@@ -523,11 +569,11 @@ static void start_data_dma(struct pxa3xx_nand_info *info, int dir_out)
 
 	if (dir_out) {
 		desc->dsadr = info->data_buff_phys;
-		desc->dtadr = NDDB_DMA_ADDR;
+		desc->dtadr = info->mmio_phys + NDDB;
 		desc->dcmd |= DCMD_INCSRCADDR | DCMD_FLOWTRG;
 	} else {
 		desc->dtadr = info->data_buff_phys;
-		desc->dsadr = NDDB_DMA_ADDR;
+		desc->dsadr = info->mmio_phys + NDDB;
 		desc->dcmd |= DCMD_INCTRGADDR | DCMD_FLOWSRC;
 	}
 
@@ -669,6 +715,7 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
 		/* disable HW ECC to get all the OOB data */
 		info->buf_count = mtd->writesize + mtd->oobsize;
 		info->buf_start = mtd->writesize + column;
+		memset(info->data_buff, 0xF