Merge branch 'next/fixes' of git://git.linaro.org/people/arnd/arm-soc

* 'next/fixes' of git://git.linaro.org/people/arnd/arm-soc: (28 commits)
  ARM: pxa/cm-x300: properly set bt_reset pin
  ARM: mmp: rename SHEEVAD to GPLUGD
  ARM: imx: Fix typo 'MACH_MX31_3DS_MXC_NAND_USE_BBT'
  ARM: i.MX28: shift frac value in _CLK_SET_RATE
  plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired
  ARM: mx5: fix clock usage for suspend
  ARM: pxa: use correct __iomem annotations
  ARM: pxa: sharpsl pm needs SPI
  ARM: pxa: centro and treo680 need palm27x
  ARM: pxa: make pxafb_smart_*() empty when not enabled
  ARM: pxa: select POWER_SUPPLY on raumfeld
  ARM: pxa: pxa95x is incompatible with earlier pxa
  ARM: pxa: CPU_FREQ_TABLE is needed for CPU_FREQ
  ARM: pxa: pxa95x/saarb depends on pxa3xx code
  ARM: pxa: allow selecting just one of TREO680/CENTRO
  ARM: pxa: export symbols from pxa3xx-ulpi
  ARM: pxa: make zylonite_pxa*_init declaration match code
  ARM: pxa/z2: fix building error of pxa27x_cpu_suspend() no longer available
  ARM: at91: add defconfig for at91sam9g45 family
  ARM: at91: remove dependency for Atmel PWM driver selector in Kconfig
  ...

5 files changed, 6 insertions, 16 deletions

diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index 9052925c6fa..ee137712f9d 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -122,7 +122,7 @@ static int __init pxa_init_gpio_chip(int gpio_end)
 		struct gpio_chip *c = &chips[i].chip;
 
 		sprintf(chips[i].label, "gpio-%d", i);
-		chips[i].regbase = (void __iomem *)GPIO_BANK(i);
+		chips[i].regbase = GPIO_BANK(i);
 
 		c->base  = gpio;
 		c->label = chips[i].label;
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 50d5f27f09d..d593878d66d 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -63,7 +63,7 @@ config AD525X_DPOT_SPI
 
 config ATMEL_PWM
 	tristate "Atmel AT32/AT91 PWM support"
-	depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9
+	depends on HAVE_CLK
 	help
 	  This option enables device driver support for the PWM channels
 	  on certain Atmel processors.  Pulse Width Modulation is used for
diff --git a/drivers/pcmcia/pxa2xx_balloon3.c b/drivers/pcmcia/pxa2xx_balloon3.c
index f56d7de7c75..22a75e610f1 100644
--- a/drivers/pcmcia/pxa2xx_balloon3.c
+++ b/drivers/pcmcia/pxa2xx_balloon3.c
@@ -97,7 +97,7 @@ static void balloon3_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 static int balloon3_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 				       const socket_state_t *state)
 {
-	__raw_writew(BALLOON3_CF_RESET, BALLOON3_CF_CONTROL_REG |
+	__raw_writew(BALLOON3_CF_RESET, BALLOON3_CF_CONTROL_REG +
 			((state->flags & SS_RESET) ?
 			BALLOON3_FPGA_SETnCLR : 0));
 	return 0;
diff --git a/drivers/video/mbx/mbxfb.c b/drivers/video/mbx/mbxfb.c
index afea9abbd67..6ce34160da7 100644
--- a/drivers/video/mbx/mbxfb.c
+++ b/drivers/video/mbx/mbxfb.c
@@ -34,7 +34,7 @@
 #include "regs.h"
 #include "reg_bits.h"
 
-static unsigned long virt_base_2700;
+static void __iomem *virt_base_2700;
 
 #define write_reg(val, reg) do { writel((val), (reg)); } while(0)
 
@@ -850,7 +850,7 @@ static int mbxfb_suspend(struct platform_device *dev, pm_message_t state)
 {
 	/* make frame buffer memory enter self-refresh mode */
 	write_reg_dly(LMPWR_MC_PWR_SRM, LMPWR);
-	while (LMPWRSTAT != LMPWRSTAT_MC_PWR_SRM)
+	while (readl(LMPWRSTAT) != LMPWRSTAT_MC_PWR_SRM)
 		; /* empty statement */
 
 	/* reset the device, since it's initial state is 'mostly sleeping' */
@@ -946,7 +946,7 @@ static int __devinit mbxfb_probe(struct platform_device *dev)
 		ret = -EINVAL;
 		goto err3;
 	}
-	virt_base_2700 = (unsigned long)mfbi->reg_virt_addr;
+	virt_base_2700 = mfbi->reg_virt_addr;
 
 	mfbi->fb_virt_addr = ioremap_nocache(mfbi->fb_phys_addr,
 					     res_size(mfbi->fb_req));
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index e89778f4081..1d1e4f175e7 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1309,16 +1309,6 @@ static int pxafb_smart_init(struct pxafb_info *fbi)
 	return 0;
 }
 #else
-int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int n_cmds)
-{
-	return 0;
-}
-
-int pxafb_smart_flush(struct fb_info *info)
-{
-	return 0;
-}
-
 static inline int pxafb_smart_init(struct pxafb_info *fbi) { return 0; }
 #endif /* CONFIG_FB_PXA_SMARTPANEL */