Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: More device tree support updates" from Olof Johansson:
 "This branch contains a number of updates for device tree support on
  several ARM platforms, in particular:

   * AT91 continues the device tree conversion adding support for a
     number of on-chip drivers and other functionality
   * ux500 adds probing of some of the core SoC blocks through device
     tree
   * Initial device tree support for ST SPEAr600 platforms
   * kirkwood continues the conversion to device-tree probing"

Manually merge arch/arm/mach-ux500/Kconfig due to MACH_U8500 rename, and
drivers/usb/gadget/at91_udc.c due to header file include cleanups.

Also do an "evil merge" for the MACH_U8500 config option rename that the
affected RMI4 touchscreen driver in staging.  It's called MACH_MOP500
now, and it was missed during previous merges.

* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  ARM: SPEAr600: Add device-tree support to SPEAr600 boards
  ARM: ux500: Provide local timer support for Device Tree
  ARM: ux500: Enable PL022 SSP Controller in Device Tree
  ARM: ux500: Enable PL310 Level 2 Cache Controller in Device Tree
  ARM: ux500: Enable PL011 AMBA UART Controller for Device Tree
  ARM: ux500: Enable Cortex-A9 GIC (Generic Interrupt Controller) in Device Tree
  ARM: ux500: db8500: list most devices in the snowball device tree
  ARM: ux500: split dts file for snowball into generic part
  ARM: ux500: combine the board init functions for DT boot
  ARM: ux500: Initial Device Tree support for Snowball
  ARM: ux500: CONFIG: Enable Device Tree support for future endeavours
  ARM: kirkwood: use devicetree for rtc-mv
  ARM: kirkwood: rtc-mv devicetree bindings
  ARM: kirkwood: fdt: define uart[01] as disabled, enable uart0
  ARM: kirkwood: fdt: facilitate new boards during fdt migration
  ARM: kirkwood: fdt: absorb kirkwood_init()
  ARM: kirkwood: fdt: use mrvl ticker symbol
  ARM: orion: wdt: use resource vice direct access
  ARM: Kirkwood: Remove tclk from kirkwood_asoc_platform_data.
  ARM: orion: spi: remove enable_clock_fix which is not used
  ...

14 files changed, 452 insertions, 81 deletions

diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index a651779d9ff..c0330a41db0 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -14,8 +14,15 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
-
-#include <asm/gpio.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/of_i2c.h>
+
+struct i2c_gpio_private_data {
+	struct i2c_adapter adap;
+	struct i2c_algo_bit_data bit_data;
+	struct i2c_gpio_platform_data pdata;
+};
 
 /* Toggle SDA by changing the direction of the pin */
 static void i2c_gpio_setsda_dir(void *data, int state)
@@ -78,24 +85,62 @@ static int i2c_gpio_getscl(void *data)
 	return gpio_get_value(pdata->scl_pin);
 }
 
+static int __devinit of_i2c_gpio_probe(struct device_node *np,
+			     struct i2c_gpio_platform_data *pdata)
+{
+	u32 reg;
+
+	if (of_gpio_count(np) < 2)
+		return -ENODEV;
+
+	pdata->sda_pin = of_get_gpio(np, 0);
+	pdata->scl_pin = of_get_gpio(np, 1);
+
+	if (!gpio_is_valid(pdata->sda_pin) || !gpio_is_valid(pdata->scl_pin)) {
+		pr_err("%s: invalid GPIO pins, sda=%d/scl=%d\n",
+		       np->full_name, pdata->sda_pin, pdata->scl_pin);
+		return -ENODEV;
+	}
+
+	of_property_read_u32(np, "i2c-gpio,delay-us", &pdata->udelay);
+
+	if (!of_property_read_u32(np, "i2c-gpio,timeout-ms", &reg))
+		pdata->timeout = msecs_to_jiffies(reg);
+
+	pdata->sda_is_open_drain =
+		of_property_read_bool(np, "i2c-gpio,sda-open-drain");
+	pdata->scl_is_open_drain =
+		of_property_read_bool(np, "i2c-gpio,scl-open-drain");
+	pdata->scl_is_output_only =
+		of_property_read_bool(np, "i2c-gpio,scl-output-only");
+
+	return 0;
+}
+
 static int __devinit i2c_gpio_probe(struct platform_device *pdev)
 {
+	struct i2c_gpio_private_data *priv;
 	struct i2c_gpio_platform_data *pdata;
 	struct i2c_algo_bit_data *bit_data;
 	struct i2c_adapter *adap;
 	int ret;
 
-	pdata = pdev->dev.platform_data;
-	if (!pdata)
-		return -ENXIO;
-
-	ret = -ENOMEM;
-	adap = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
-	if (!adap)
-		goto err_alloc_adap;
-	bit_data = kzalloc(sizeof(struct i2c_algo_bit_data), GFP_KERNEL);
-	if (!bit_data)
-		goto err_alloc_bit_data;
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	adap = &priv->adap;
+	bit_data = &priv->bit_data;
+	pdata = &priv->pdata;
+
+	if (pdev->dev.of_node) {
+		ret = of_i2c_gpio_probe(pdev->dev.of_node, pdata);
+		if (ret)
+			return ret;
+	} else {
+		if (!pdev->dev.platform_data)
+			return -ENXIO;
+		memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
+	}
 
 	ret = gpio_request(pdata->sda_pin, "sda");
 	if (ret)
@@ -143,6 +188,7 @@ static int __devinit i2c_gpio_probe(struct platform_device *pdev)
 	adap->algo_data = bit_data;
 	adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
 
 	/*
 	 * If "dev->id" is negative we consider it as zero.
@@ -154,7 +200,9 @@ static int __devinit i2c_gpio_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_add_bus;
 
-	platform_set_drvdata(pdev, adap);
+	of_i2c_register_devices(adap);
+
+	platform_set_drvdata(pdev, priv);
 
 	dev_info(&pdev->dev, "using pins %u (SDA) and %u (SCL%s)\n",
 		 pdata->sda_pin, pdata->scl_pin,
@@ -168,34 +216,40 @@ err_add_bus:
 err_request_scl:
 	gpio_free(pdata->sda_pin);
 err_request_sda:
-	kfree(bit_data);
-err_alloc_bit_data:
-	kfree(adap);
-err_alloc_adap:
 	return ret;
 }
 
 static int __devexit i2c_gpio_remove(struct platform_device *pdev)
 {
+	struct i2c_gpio_private_data *priv;
 	struct i2c_gpio_platform_data *pdata;
 	struct i2c_adapter *adap;
 
-	adap = platform_get_drvdata(pdev);
-	pdata = pdev->dev.platform_data;
+	priv = platform_get_drvdata(pdev);
+	adap = &priv->adap;
+	pdata = &priv->pdata;
 
 	i2c_del_adapter(adap);
 	gpio_free(pdata->scl_pin);
 	gpio_free(pdata->sda_pin);
-	kfree(adap->algo_data);
-	kfree(adap);
 
 	return 0;
 }
 
+#if defined(CONFIG_OF)
+static const struct of_device_id i2c_gpio_dt_ids[] = {
+	{ .compatible = "i2c-gpio", },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, i2c_gpio_dt_ids);
+#endif
+
 static struct platform_driver i2c_gpio_driver = {
 	.driver		= {
 		.name	= "i2c-gpio",
 		.owner	= THIS_MODULE,
+		.of_match_table	= of_match_ptr(i2c_gpio_dt_ids),
 	},
 	.probe		= i2c_gpio_probe,
 	.remove		= __devexit_p(i2c_gpio_remove),
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 35b4fb55dbd..ae7e37d9ac1 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -27,6 +27,10 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/of_mtd.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
@@ -34,22 +38,10 @@
 #include <linux/dmaengine.h>
 #include <linux/gpio.h>
 #include <linux/io.h>
+#include <linux/platform_data/atmel.h>
 
-#include <mach/board.h>
 #include <mach/cpu.h>
 
-#ifdef CONFIG_MTD_NAND_ATMEL_ECC_HW
-#define hard_ecc	1
-#else
-#define hard_ecc	0
-#endif
-
-#ifdef CONFIG_MTD_NAND_ATMEL_ECC_NONE
-#define no_ecc		1
-#else
-#define no_ecc		0
-#endif
-
 static int use_dma = 1;
 module_param(use_dma, int, 0);
 
@@ -95,7 +87,7 @@ struct atmel_nand_host {
 	struct mtd_info		mtd;
 	void __iomem		*io_base;
 	dma_addr_t		io_phys;
-	struct atmel_nand_data	*board;
+	struct atmel_nand_data	board;
 	struct device		*dev;
 	void __iomem		*ecc;
 
@@ -113,8 +105,8 @@ static int cpu_has_dma(void)
  */
 static void atmel_nand_enable(struct atmel_nand_host *host)
 {
-	if (gpio_is_valid(host->board->enable_pin))
-		gpio_set_value(host->board->enable_pin, 0);
+	if (gpio_is_valid(host->board.enable_pin))
+		gpio_set_value(host->board.enable_pin, 0);
 }
 
 /*
@@ -122,8 +114,8 @@ static void atmel_nand_enable(struct atmel_nand_host *host)
  */
 static void atmel_nand_disable(struct atmel_nand_host *host)
 {
-	if (gpio_is_valid(host->board->enable_pin))
-		gpio_set_value(host->board->enable_pin, 1);
+	if (gpio_is_valid(host->board.enable_pin))
+		gpio_set_value(host->board.enable_pin, 1);
 }
 
 /*
@@ -144,9 +136,9 @@ static void atmel_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl
 		return;
 
 	if (ctrl & NAND_CLE)
-		writeb(cmd, host->io_base + (1 << host->board->cle));
+		writeb(cmd, host->io_base + (1 << host->board.cle));
 	else
-		writeb(cmd, host->io_base + (1 << host->board->ale));
+		writeb(cmd, host->io_base + (1 << host->board.ale));
 }
 
 /*
@@ -157,8 +149,8 @@ static int atmel_nand_device_ready(struct mtd_info *mtd)
 	struct nand_chip *nand_chip = mtd->priv;
 	struct atmel_nand_host *host = nand_chip->priv;
 
-	return gpio_get_value(host->board->rdy_pin) ^
-                !!host->board->rdy_pin_active_low;
+	return gpio_get_value(host->board.rdy_pin) ^
+                !!host->board.rdy_pin_active_low;
 }
 
 /*
@@ -273,7 +265,7 @@ static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
 		if (atmel_nand_dma_op(mtd, buf, len, 1) == 0)
 			return;
 
-	if (host->board->bus_width_16)
+	if (host->board.bus_width_16)
 		atmel_read_buf16(mtd, buf, len);
 	else
 		atmel_read_buf8(mtd, buf, len);
@@ -289,7 +281,7 @@ static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
 		if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) == 0)
 			return;
 
-	if (host->board->bus_width_16)
+	if (host->board.bus_width_16)
 		atmel_write_buf16(mtd, buf, len);
 	else
 		atmel_write_buf8(mtd, buf, len);
@@ -481,6 +473,56 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
 	}
 }
 
+#if defined(CONFIG_OF)
+static int __devinit atmel_of_init_port(struct atmel_nand_host *host,
+					 struct device_node *np)
+{
+	u32 val;
+	int ecc_mode;
+	struct atmel_nand_data *board = &host->board;
+	enum of_gpio_flags flags;
+
+	if (of_property_read_u32(np, "atmel,nand-addr-offset", &val) == 0) {
+		if (val >= 32) {
+			dev_err(host->dev, "invalid addr-offset %u\n", val);
+			return -EINVAL;
+		}
+		board->ale = val;
+	}
+
+	if (of_property_read_u32(np, "atmel,nand-cmd-offset", &val) == 0) {
+		if (val >= 32) {
+			dev_err(host->dev, "invalid cmd-offset %u\n", val);
+			return -EINVAL;
+		}
+		board->cle = val;
+	}
+
+	ecc_mode = of_get_nand_ecc_mode(np);
+
+	board->ecc_mode = ecc_mode < 0 ? NAND_ECC_SOFT : ecc_mode;
+
+	board->on_flash_bbt = of_get_nand_on_flash_bbt(np);
+
+	if (of_get_nand_bus_width(np) == 16)
+		board->bus_width_16 = 1;
+
+	board->rdy_pin = of_get_gpio_flags(np, 0, &flags);
+	board->rdy_pin_active_low = (flags == OF_GPIO_ACTIVE_LOW);
+
+	board->enable_pin = of_get_gpio(np, 1);
+	board->det_pin = of_get_gpio(np, 2);
+
+	return 0;
+}
+#else
+static int __devinit atmel_of_init_port(struct atmel_nand_host *host,
+					 struct device_node *np)
+{
+	return -EINVAL;
+}
+#endif
+
 /*
  * Probe for the NAND device.
  */
@@ -491,6 +533,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 	struct nand_chip *nand_chip;
 	struct resource *regs;
 	struct resource *mem;
+	struct mtd_part_parser_data ppdata = {};
 	int res;
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -517,8 +560,15 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 
 	mtd = &host->mtd;
 	nand_chip = &host->nand_chip;
-	host->board = pdev->dev.platform_data;
 	host->dev = &pdev->dev;
+	if (pdev->dev.of_node) {
+		res = atmel_of_init_port(host, pdev->dev.of_node);
+		if (res)
+			goto err_nand_ioremap;
+	} else {
+		memcpy(&host->board, pdev->dev.platform_data,
+		       sizeof(struct atmel_nand_data));
+	}
 
 	nand_chip->priv = host;		/* link the private data structures */
 	mtd->priv = nand_chip;
@@ -529,26 +579,25 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 	nand_chip->IO_ADDR_W = host->io_base;
 	nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl;
 
-	if (gpio_is_valid(host->board->rdy_pin))
+	if (gpio_is_valid(host->board.rdy_pin))
 		nand_chip->dev_ready = atmel_nand_device_ready;
 
+	nand_chip->ecc.mode = host->board.ecc_mode;
+
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!regs && hard_ecc) {
+	if (!regs && nand_chip->ecc.mode == NAND_ECC_HW) {
 		printk(KERN_ERR "atmel_nand: can't get I/O resource "
 				"regs\nFalling back on software ECC\n");
+		nand_chip->ecc.mode = NAND_ECC_SOFT;
 	}
 
-	nand_chip->ecc.mode = NAND_ECC_SOFT;	/* enable ECC */
-	if (no_ecc)
-		nand_chip->ecc.mode = NAND_ECC_NONE;
-	if (hard_ecc && regs) {
+	if (nand_chip->ecc.mode == NAND_ECC_HW) {
 		host->ecc = ioremap(regs->start, resource_size(regs));
 		if (host->ecc == NULL) {
 			printk(KERN_ERR "atmel_nand: ioremap failed\n");
 			res = -EIO;
 			goto err_ecc_ioremap;
 		}
-		nand_chip->ecc.mode = NAND_ECC_HW;
 		nand_chip->ecc.calculate = atmel_nand_calculate;
 		nand_chip->ecc.correct = atmel_nand_correct;
 		nand_chip->ecc.hwctl = atmel_nand_hwctl;
@@ -558,7 +607,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 
 	nand_chip->chip_delay = 20;		/* 20us command delay time */
 
-	if (host->board->bus_width_16)	/* 16-bit bus width */
+	if (host->board.bus_width_16)	/* 16-bit bus width */
 		nand_chip->options |= NAND_BUSWIDTH_16;
 
 	nand_chip->read_buf = atmel_read_buf;
@@ -567,15 +616,15 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, host);
 	atmel_nand_enable(host);
 
-	if (gpio_is_valid(host->board->det_pin)) {
-		if (gpio_get_value(host->board->det_pin)) {
+	if (gpio_is_valid(host->board.det_pin)) {
+		if (gpio_get_value(host->board.det_pin)) {
 			printk(KERN_INFO "No SmartMedia card inserted.\n");
 			res = -ENXIO;
 			goto err_no_card;
 		}
 	}
 
-	if (on_flash_bbt) {
+	if (host->board.on_flash_bbt || on_flash_bbt) {
 		printk(KERN_INFO "atmel_nand: Use On Flash BBT\n");
 		nand_chip->bbt_options |= NAND_BBT_USE_FLASH;
 	}
@@ -650,8 +699,9 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 	}
 
 	mtd->name = "atmel_nand";
-	res = mtd_device_parse_register(mtd, NULL, 0,
-			host->board->parts, host->board->num_parts);
+	ppdata.of_node = pdev->dev.of_node;
+	res = mtd_device_parse_register(mtd, NULL, &ppdata,
+			host->board.parts, host->board.num_parts);
 	if (!res)
 		return res;
 
@@ -695,11 +745,21 @@ static int __exit atmel_nand_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#if defined(CONFIG_OF)
+static const struct of_device_id atmel_nand_dt_ids[] = {
+	{ .compatible = "atmel,at91rm9200-nand" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmel_nand_dt_ids);
+#endif
+
 static struct platform_driver atmel_nand_driver = {
 	.remove		= __exit_p(atmel_nand_remove),
 	.driver		= {
 		.name	= "atmel_nand",
 		.owner	= THIS_MODULE,
+		.of_match_table	= of_match_ptr(atmel_nand_dt_ids),
 	},
 };
 
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index 6ea51dcbc72..8e84ce9765a 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -91,4 +91,8 @@ config OF_PCI_IRQ
 	help
 	  OpenFirmware PCI IRQ routing helpers
 
+config OF_MTD
+	depends on MTD
+	def_bool y
+
 endmenu # OF
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index a73f5a51ff4..aa90e602c8a 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_OF_SELFTEST) += selftest.o
 obj-$(CONFIG_OF_MDIO)	+= of_mdio.o
 obj-$(CONFIG_OF_PCI)	+= of_pci.o
 obj-$(CONFIG_OF_PCI_IRQ)  += of_pci_irq.o
+obj-$(CONFIG_OF_MTD)	+= of_mtd.o
diff --git a/drivers/of/of_mtd.c b/drivers/of/of_mtd.c
new file mode 100644
index 00000000000..e7cad627a5d
--- /dev/null
+++ b/drivers/of/of_mtd.c
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * OF helpers for mtd.
+ *
+ * This file is released under the GPLv2
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/of_mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/export.h>
+
+/**
+ * It maps 'enum nand_ecc_modes_t' found in include/linux/mtd/nand.h
+ * into the device tree binding of 'nand-ecc', so that MTD
+ * device driver can get nand ecc from device tree.
+ */
+static const char *nand_ecc_modes[] = {
+	[NAND_ECC_NONE]		= "none",
+	[NAND_ECC_SOFT]		= "soft",
+	[NAND_ECC_HW]		= "hw",
+	[NAND_ECC_HW_SYNDROME]	= "hw_syndrome",
+	[NAND_ECC_HW_OOB_FIRST]	= "hw_oob_first",
+	[NAND_ECC_SOFT_BCH]	= "soft_bch",
+};
+
+/**
+ * of_get_nand_ecc_mode - Get nand ecc mode for given device_node
+ * @np:	Pointer to the given device_node
+ *
+ * The function gets ecc mode string from property 'nand-ecc-mode',
+ * and return its index in nand_ecc_modes table, or errno in error case.
+ */
+const int of_get_nand_ecc_mode(struct device_node *np)
+{
+	const char *pm;
+	int err, i;
+
+	err = of_property_read_string(np, "nand-ecc-mode", &pm);
+	if (err < 0)
+		return err;
+
+	for (i = 0; i < ARRAY_SIZE(nand_ecc_modes); i++)
+		if (!strcasecmp(pm, nand_ecc_modes[i]))
+			return i;
+
+	return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(of_get_nand_ecc_mode);
+
+/**
+ * of_get_nand_bus_width - Get nand bus witdh for given device_node
+ * @np:	Pointer to the given device_node
+ *
+ * return bus width option, or errno in error case.
+ */
+int of_get_nand_bus_width(struct device_node *np)
+{
+	u32 val;
+
+	if (of_property_read_u32(np, "nand-bus-width", &val))
+		return 8;
+
+	switch(val) {
+	case 8:
+	case 16:
+		return val;
+	default:
+		return -EIO;
+	}
+}
+EXPORT_SYMBOL_GPL(of_get_nand_bus_width);
+
+/**
+ * of_get_nand_on_flash_bbt - Get nand on flash bbt for given device_node
+ * @np:	Pointer to the given device_node
+ *
+ * return true if present false other wise
+ */
+bool of_get_nand_on_flash_bbt(struct device_node *np)
+{
+	return of_property_read_bool(np, "nand-on-flash-bbt");
+}
+EXPORT_SYMBOL_GPL(of_get_nand_on_flash_bbt);
diff --git a/drivers/rtc/rtc-mv.c b/drivers/rtc/rtc-mv.c
index 1300962486d..b2185f4255a 100644
--- a/drivers/rtc/rtc-mv.c
+++ b/drivers/rtc/rtc-mv.c
@@ -12,6 +12,7 @@
 #include <linux/bcd.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 #include <linux/delay.h>
 #include <linux/gfp.h>
 #include <linux/module.h>
@@ -294,11 +295,19 @@ static int __exit mv_rtc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static struct of_device_id rtc_mv_of_match_table[] = {
+	{ .compatible = "mrvl,orion-rtc", },
+	{}
+};
+#endif
+
 static struct platform_driver mv_rtc_driver = {
 	.remove		= __exit_p(mv_rtc_remove),
 	.driver		= {
 		.name	= "rtc-mv",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(rtc_mv_of_match_table),
 	},
 };
 
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index 13448c832c4..e496f799b7a 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -359,11 +359,6 @@ static int orion_spi_setup(struct spi_device *spi)
 
 	orion_spi = spi_master_get_devdata(spi->master);
 
-	/* Fix ac timing if required.   */
-	if (orion_spi->spi_info->enable_clock_fix)
-		orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG,
-				  (1 << 14));
-
 	if ((spi->max_speed_hz == 0)
 			|| (spi->max_speed_hz > orion_spi->max_speed))
 		spi->max_speed_hz = orion_spi->max_speed;
diff --git a/drivers/staging/ste_rmi4/Makefile b/drivers/staging/ste_rmi4/Makefile
index 176f4690057..e4c03351420 100644
--- a/drivers/staging/ste_rmi4/Makefile
+++ b/drivers/staging/ste_rmi4/Makefile
@@ -2,4 +2,4 @@
 # Makefile for the RMI4 touchscreen driver.
 #
 obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4) += synaptics_i2c_rmi4.o
-obj-$(CONFIG_MACH_U8500) += board-mop500-u8500uib-rmi4.o
+obj-$(CONFIG_MACH_MOP500) += board-mop500-u8500uib-rmi4.o
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 48ac6e781ba..cbd8f5f8059 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -44,7 +44,7 @@ config USB_ARCH_HAS_EHCI
 	default y if PPC_MPC512x
 	default y if ARCH_IXP4XX
 	default y if ARCH_W90X900
-	default y if ARCH_AT91SAM9G45
+	default y if ARCH_AT91
 	default y if ARCH_MXC
 	default y if ARCH_OMAP3
 	default y if ARCH_CNS3XXX
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 26c0b75f152..2633f759511 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -137,7 +137,7 @@ choice
 
 config USB_AT91
 	tristate "Atmel AT91 USB Device Port"
-	depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91SAM9G45
+	depends on ARCH_AT91
 	help
 	   Many Atmel AT91 processors (such as the AT91RM2000) have a
 	   full speed USB Device Port with support for five configurable
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 2db5f68f796..36fd2b4b49a 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -29,6 +29,8 @@
 #include <linux/clk.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
 
 #include <asm/byteorder.h>
 #include <mach/hardware.h>
@@ -1707,7 +1709,27 @@ static void at91udc_shutdown(struct platform_device *dev)
 	spin_unlock_irqrestore(&udc->lock, flags);
 }
 
-static int __init at91udc_probe(struct platform_device *pdev)
+static void __devinit at91udc_of_init(struct at91_udc *udc,
+				     struct device_node *np)
+{
+	struct at91_udc_data *board = &udc->board;
+	u32 val;
+	enum of_gpio_flags flags;
+
+	if (of_property_read_u32(np, "atmel,vbus-polled", &val) == 0)
+		board->vbus_polled = 1;
+
+	board->vbus_pin = of_get_named_gpio_flags(np, "atmel,vbus-gpio", 0,
+						  &flags);
+	board->vbus_active_low = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0;
+
+	board->pullup_pin = of_get_named_gpio_flags(np, "atmel,pullup-gpio", 0,
+						  &flags);
+
+	board->pullup_active_low = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0;
+}
+
+static int __devinit at91udc_probe(struct platform_device *pdev)
 {
 	struct device	*dev = &pdev->dev;
 	struct at91_udc	*udc;
@@ -1742,7 +1764,11 @@ static int __init at91udc_probe(struct platform_device *pdev)
 	/* init software state */
 	udc = &controller;
 	udc->gadget.dev.parent = dev;
-	udc->board = *(struct at91_udc_data *) dev->platform_data;
+	if (pdev->dev.of_node)
+		at91udc_of_init(udc, pdev->dev.of_node);
+	else
+		memcpy(&udc->board, dev->platform_data,
+		       sizeof(struct at91_udc_data));
 	udc->pdev = pdev;
 	udc->enabled = 0;
 	spin_lock_init(&udc->lock);
@@ -1971,6 +1997,15 @@ static int at91udc_resume(struct platform_device *pdev)
 #define	at91udc_resume	NULL
 #endif
 
+#if defined(CONFIG_OF)
+static const struct of_device_id at91_udc_dt_ids[] = {
+	{ .compatible = "atmel,at91rm9200-udc" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, at91_udc_dt_ids);
+#endif
+
 static struct platform_driver at91_udc_driver = {
 	.remove		= __exit_p(at91udc_remove),
 	.shutdown	= at91udc_shutdown,
@@ -1979,6 +2014,7 @@ static struct platform_driver at91_udc_driver = {
 	.driver		= {
 		.name	= (char *) driver_name,
 		.owner	= THIS_MODULE,
+		.of_match_table	= of_match_ptr(at91_udc_dt_ids),
 	},
 };
 
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index a5a3ef1f009..19f318ababa 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -13,6 +13,7 @@
 
 #include <linux/clk.h>
 #include <linux/platform_device.h>
+#include <linux/of_platform.h>
 
 /* interface and function clocks */
 static struct clk *iclk, *fclk;
@@ -115,6 +116,8 @@ static const struct hc_driver ehci_atmel_hc_driver = {
 	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
 };
 
+static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32);
+
 static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd;
@@ -137,6 +140,13 @@ static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev)
 		goto fail_create_hcd;
 	}
 
+	/* Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we have dma capability bindings this can go away.
+	 */
+	if (!pdev->dev.dma_mask)
+		pdev->dev.dma_mask = &at91_ehci_dma_mask;
+
 	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
 	if (!hcd) {
 		retval = -ENOMEM;
@@ -225,9 +235,21 @@ static int __devexit ehci_atmel_drv_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id atmel_ehci_dt_ids[] = {
+	{ .compatible = "atmel,at91sam9g45-ehci" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmel_ehci_dt_ids);
+#endif
+
 static struct platform_driver ehci_atmel_driver = {
 	.probe		= ehci_atmel_drv_probe,
 	.remove		= __devexit_p(ehci_atmel_drv_remove),
 	.shutdown	= usb_hcd_platform_shutdown,
-	.driver.name	= "atmel-ehci",
+	.driver		= {
+		.name	= "atmel-ehci",
+		.of_match_table	= of_match_ptr(atmel_ehci_dt_ids),
+	},
 };
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 8e855eb0bf8..db8963f5fbc 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -14,6 +14,8 @@
 
 #include <linux/clk.h>
 #include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/gpio.h>
@@ -477,13 +479,109 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id at91_ohci_dt_ids[] = {
+	{ .compatible = "atmel,at91rm9200-ohci" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids);
+
+static u64 at91_ohci_dma_mask = DMA_BIT_MASK(32);
+
+static int __devinit ohci_at91_of_init(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	int i, ret, gpio;
+	enum of_gpio_flags flags;
+	struct at91_usbh_data	*pdata;
+	u32 ports;
+
+	if (!np)
+		return 0;
+
+	/* Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we have dma capability bindings this can go away.
+	 */
+	if (!pdev->dev.dma_mask)
+		pdev->dev.dma_mask = &at91_ohci_dma_mask;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	if (!of_property_read_u32(np, "num-ports", &ports))
+		pdata->ports = ports;
+
+	for (i = 0; i < 2; i++) {
+		gpio = of_get_named_gpio_flags(np, "atmel,vbus-gpio", i, &flags);
+		pdata->vbus_pin[i] = gpio;
+		if (!gpio_is_valid(gpio))
+			continue;
+		pdata->vbus_pin_active_low[i] = flags & OF_GPIO_ACTIVE_LOW;
+		ret = gpio_request(gpio, "ohci_vbus");
+		if (ret) {
+			dev_warn(&pdev->dev, "can't request vbus gpio %d", gpio);
+			continue;
+		}
+		ret = gpio_direction_output(gpio, !(flags & OF_GPIO_ACTIVE_LOW) ^ 1);
+		if (ret)
+			dev_warn(&pdev->dev, "can't put vbus gpio %d as output %d",
+				 !(flags & OF_GPIO_ACTIVE_LOW) ^ 1, gpio);
+	}
+
+	for (i = 0; i < 2; i++) {
+		gpio = of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags);
+		pdata->overcurrent_pin[i] = gpio;
+		if (!gpio_is_valid(gpio))
+			continue;
+		ret = gpio_request(gpio, "ohci_overcurrent");
+		if (ret) {
+			dev_err(&pdev->dev, "can't request overcurrent gpio %d", gpio);
+			continue;
+		}
+
+		ret = gpio_direction_input(gpio);
+		if (ret) {
+			dev_err(&pdev->dev, "can't configure overcurrent gpio %d as input", gpio);
+			continue;
+		}
+
+		ret = request_irq(gpio_to_irq(gpio),
+				  ohci_hcd_at91_overcurrent_irq,
+				  IRQF_SHARED, "ohci_overcurrent", pdev);
+		if (ret) {
+			gpio_free(gpio);
+			dev_warn(& pdev->dev, "cannot get GPIO IRQ for overcurrent\n");
+		}
+	}
+
+	pdev->dev.platform_data = pdata;
+
+	return 0;
+}
+#else
+static int __devinit ohci_at91_of_init(struct platform_device *pdev)
+{
+	return 0;
+}
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
 {
-	struct at91_usbh_data	*pdata = pdev->dev.platform_data;
+	struct at91_usbh_data	*pdata;
 	int			i;
 
+	i = ohci_at91_of_init(pdev);
+
+	if (i)
+		return i;
+
+	pdata = pdev->dev.platform_data;
+
 	if (pdata) {
 		for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
 			if (!gpio_is_valid(pdata->vbus_pin[i]))
@@ -596,5 +694,6 @@ static struct platform_driver ohci_hcd_at91_driver = {
 	.driver		= {
 		.name	= "at91_ohci",
 		.owner	= THIS_MODULE,
+		.of_match_table	= of_match_ptr(at91_ohci_dt_ids),
 	},
 };
diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index 4ad78f86851..1368e4ca310 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -28,9 +28,9 @@
 /*
  * Watchdog timer block registers.
  */
-#define TIMER_CTRL		(TIMER_VIRT_BASE + 0x0000)
+#define TIMER_CTRL		0x0000
 #define  WDT_EN			0x0010
-#define WDT_VAL			(TIMER_VIRT_BASE + 0x0024)
+#define WDT_VAL			0x0024
 
 #define WDT_MAX_CYCLE_COUNT	0xffffffff
 #define WDT_IN_USE		0
@@ -40,6 +40,7 @@ static int nowayout = WATCHDOG_NOWAYOUT;
 static int heartbeat = -1;		/* module parameter (seconds) */
 static unsigned int wdt_max_duration;	/* (seconds) */
 static unsigned int wdt_tclk;
+static void __iomem *wdt_reg;
 static unsigned long wdt_status;
 static DEFINE_SPINLOCK(wdt_lock);
 
@@ -48,7 +49,7 @@ static void orion_wdt_ping(void)
 	spin_lock(&wdt_lock);
 
 	/* Reload watchdog duration */
-	writel(wdt_tclk * heartbeat, WDT_VAL);
+	writel(wdt_tclk * heartbeat, wdt_reg + WDT_VAL);
 
 	spin_unlock(&wdt_lock);
 }
@@ -60,7 +61,7 @@ static void orion_wdt_enable(void)
 	spin_lock(&wdt_lock);
 
 	/* Set watchdog duration */
-	writel(wdt_tclk * heartbeat, WDT_VAL);
+	writel(wdt_tclk * heartbeat, wdt_reg + WDT_VAL);
 
 	/* Clear watchdog timer interrupt */
 	reg = readl(BRIDGE_CAUSE);
@@ -68,9 +69,9 @@ static void orion_wdt_enable(void)
 	writel(reg, BRIDGE_CAUSE);
 
 	/* Enable watchdog timer */
-	reg = readl(TIMER_CTRL);
+	reg = readl(wdt_reg + TIMER_CTRL);
 	reg |= WDT_EN;
-	writel(reg, TIMER_CTRL);
+	writel(reg, wdt_reg + TIMER_CTRL);
 
 	/* Enable reset on watchdog */
 	reg = readl(RSTOUTn_MASK);
@@ -92,9 +93,9 @@ static void orion_wdt_disable(void)
 	writel(reg, RSTOUTn_MASK);
 
 	/* Disable watchdog timer */
-	reg = readl(TIMER_CTRL);
+	reg = readl(wdt_reg + TIMER_CTRL);
 	reg &= ~WDT_EN;
-	writel(reg, TIMER_CTRL);
+	writel(reg, wdt_reg + TIMER_CTRL);
 
 	spin_unlock(&wdt_lock);
 }
@@ -102,7 +103,7 @@ static void orion_wdt_disable(void)
 static int orion_wdt_get_timeleft(int *time_left)
 {
 	spin_lock(&wdt_lock);
-	*time_left = readl(WDT_VAL) / wdt_tclk;
+	*time_left = readl(wdt_reg + WDT_VAL) / wdt_tclk;
 	spin_unlock(&wdt_lock);
 	return 0;
 }
@@ -236,6 +237,7 @@ static struct miscdevice orion_wdt_miscdev = {
 static int __devinit orion_wdt_probe(struct platform_device *pdev)
 {
 	struct orion_wdt_platform_data *pdata = pdev->dev.platform_data;
+	struct resource *res;
 	int ret;
 
 	if (pdata) {
@@ -245,6 +247,10 @@ static int __devinit orion_wdt_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	wdt_reg = ioremap(res->start, resource_size(res));
+
 	if (orion_wdt_miscdev.parent)
 		return -EBUSY;
 	orion_wdt_miscdev.parent = &pdev->dev;