diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-01-18 14:05:59 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-01-18 14:05:59 -0800 |
commit | 793388a797ba29cd8baed241301601814f85a308 (patch) | |
tree | 9913b418f52c6121e49167d2fe70b8b43a5c04b6 /drivers | |
parent | abad21a8ba7da8ada4d90d39644acb70dd6f96ff (diff) | |
parent | ebebd49a8eab5e9aa1b1f8f1614ccc3c2120f886 (diff) |
Merge tag 'tty-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg Kroah-Hartman:
"Here are a few tty/serial driver fixes for 3.8-rc4 that resolve a
number of problems that people have been having, including the ptys
ioctl issue that is a regression fix"
* tag 'tty-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
8250/16?50: Add support for Broadcom TruManage redirected serial port
pty: return EINVAL for TIOCGPTN for BSD ptys
serial:ifx6x60:Keep word size accordance with SPI controller
tty: 8250_dw: Fix inverted arguments to serial_out in IRQ handler
serial: samsung: remove redundant setting of line config during port reset
serial:ifx6x60:Delete SPI timer when shut down port
tty/8250: The correct device id for this card is 0x0022
tty/8250: pbn_b0_8_1152000_200 is supposed to be an 8 port definition
tty: serial: vt8500: fix return value check in vt8500_serial_probe()
serial: mxs-auart: Index is unsigned
mxs: uart: fix setting RTS from software
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/tty/pty.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250.c | 11 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250.h | 1 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_dw.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 42 | ||||
-rw-r--r-- | drivers/tty/serial/ifx6x60.c | 4 | ||||
-rw-r--r-- | drivers/tty/serial/mxs-auart.c | 6 | ||||
-rw-r--r-- | drivers/tty/serial/samsung.c | 1 | ||||
-rw-r--r-- | drivers/tty/serial/vt8500_serial.c | 2 |
9 files changed, 63 insertions, 8 deletions
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index be6a373601b..79ff3a5e925 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -441,6 +441,8 @@ static int pty_bsd_ioctl(struct tty_struct *tty, return pty_get_pktmode(tty, (int __user *)arg); case TIOCSIG: /* Send signal to other side of pty */ return pty_signal(tty, (int) arg); + case TIOCGPTN: /* TTY returns ENOTTY, but glibc expects EINVAL here */ + return -EINVAL; } return -ENOIOCTLCMD; } diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index d085e3a8ec0..f9320437a64 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -300,6 +300,12 @@ static const struct serial8250_config uart_config[] = { UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00, .flags = UART_CAP_FIFO, }, + [PORT_BRCM_TRUMANAGE] = { + .name = "TruManage", + .fifo_size = 1, + .tx_loadsz = 1024, + .flags = UART_CAP_HFIFO, + }, [PORT_8250_CIR] = { .name = "CIR port" } @@ -1490,6 +1496,11 @@ void serial8250_tx_chars(struct uart_8250_port *up) port->icount.tx++; if (uart_circ_empty(xmit)) break; + if (up->capabilities & UART_CAP_HFIFO) { + if ((serial_port_in(port, UART_LSR) & BOTH_EMPTY) != + BOTH_EMPTY) + break; + } } while (--count > 0); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index 3b4ea84898c..12caa1292b7 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -40,6 +40,7 @@ struct serial8250_config { #define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */ #define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */ #define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */ +#define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */ #define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ #define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 1d0dba2d562..096d2ef48b3 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -79,7 +79,7 @@ static int dw8250_handle_irq(struct uart_port *p) } else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) { /* Clear the USR and write the LCR again. */ (void)p->serial_in(p, UART_USR); - p->serial_out(p, d->last_lcr, UART_LCR); + p->serial_out(p, UART_LCR, d->last_lcr); return 1; } diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 26b9dc012ed..a27a98e1b06 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1085,6 +1085,18 @@ pci_omegapci_setup(struct serial_private *priv, return setup_port(priv, port, 2, idx * 8, 0); } +static int +pci_brcm_trumanage_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + int ret = pci_default_setup(priv, board, port, idx); + + port->port.type = PORT_BRCM_TRUMANAGE; + port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); + return ret; +} + static int skip_tx_en_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_8250_port *port, int idx) @@ -1301,9 +1313,10 @@ pci_wch_ch353_setup(struct serial_private *priv, #define PCI_VENDOR_ID_AGESTAR 0x5372 #define PCI_DEVICE_ID_AGESTAR_9375 0x6872 #define PCI_VENDOR_ID_ASIX 0x9710 -#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0019 #define PCI_DEVICE_ID_COMMTECH_4224PCIE 0x0020 #define PCI_DEVICE_ID_COMMTECH_4228PCIE 0x0021 +#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022 +#define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ @@ -1954,6 +1967,17 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .setup = pci_xr17v35x_setup, }, /* + * Broadcom TruManage (NetXtreme) + */ + { + .vendor = PCI_VENDOR_ID_BROADCOM, + .device = PCI_DEVICE_ID_BROADCOM_TRUMANAGE, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_brcm_trumanage_setup, + }, + + /* * Default "match everything" terminator entry */ { @@ -2148,6 +2172,7 @@ enum pci_board_num_t { pbn_ce4100_1_115200, pbn_omegapci, pbn_NETMOS9900_2s_115200, + pbn_brcm_trumanage, }; /* @@ -2246,7 +2271,7 @@ static struct pciserial_board pci_boards[] = { [pbn_b0_8_1152000_200] = { .flags = FL_BASE0, - .num_ports = 2, + .num_ports = 8, .base_baud = 1152000, .uart_offset = 0x200, }, @@ -2892,6 +2917,12 @@ static struct pciserial_board pci_boards[] = { .num_ports = 2, .base_baud = 115200, }, + [pbn_brcm_trumanage] = { + .flags = FL_BASE0, + .num_ports = 1, + .reg_shift = 2, + .base_baud = 115200, + }, }; static const struct pci_device_id blacklist[] = { @@ -4471,6 +4502,13 @@ static struct pci_device_id serial_pci_tbl[] = { pbn_omegapci }, /* + * Broadcom TruManage + */ + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BROADCOM_TRUMANAGE, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_brcm_trumanage }, + + /* * AgeStar as-prs2-009 */ { PCI_VENDOR_ID_AGESTAR, PCI_DEVICE_ID_AGESTAR_9375, diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 675d94ab0af..8cb6d8d66a1 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -637,6 +637,7 @@ static void ifx_port_shutdown(struct tty_port *port) clear_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags); mrdy_set_low(ifx_dev); + del_timer(&ifx_dev->spi_timer); clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); tasklet_kill(&ifx_dev->io_work_tasklet); } @@ -810,7 +811,8 @@ static void ifx_spi_io(unsigned long data) ifx_dev->spi_xfer.cs_change = 0; ifx_dev->spi_xfer.speed_hz = ifx_dev->spi_dev->max_speed_hz; /* ifx_dev->spi_xfer.speed_hz = 390625; */ - ifx_dev->spi_xfer.bits_per_word = spi_bpw; + ifx_dev->spi_xfer.bits_per_word = + ifx_dev->spi_dev->bits_per_word; ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer; ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer; diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 6db23b035ef..e55615eb34a 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -253,7 +253,7 @@ static void mxs_auart_tx_chars(struct mxs_auart_port *s) struct circ_buf *xmit = &s->port.state->xmit; if (auart_dma_enabled(s)) { - int i = 0; + u32 i = 0; int size; void *buffer = s->tx_dma_buf; @@ -412,10 +412,12 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl) u32 ctrl = readl(u->membase + AUART_CTRL2); - ctrl &= ~AUART_CTRL2_RTSEN; + ctrl &= ~(AUART_CTRL2_RTSEN | AUART_CTRL2_RTS); if (mctrl & TIOCM_RTS) { if (tty_port_cts_enabled(&u->state->port)) ctrl |= AUART_CTRL2_RTSEN; + else + ctrl |= AUART_CTRL2_RTS; } s->ctrl = mctrl; diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 12e5249d053..e514b3a4dc5 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1006,7 +1006,6 @@ static void s3c24xx_serial_resetport(struct uart_port *port, ucon &= ucon_mask; wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); /* reset both fifos */ wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c index 8fd181436a6..d5ed9f61300 100644 --- a/drivers/tty/serial/vt8500_serial.c +++ b/drivers/tty/serial/vt8500_serial.c @@ -604,7 +604,7 @@ static int vt8500_serial_probe(struct platform_device *pdev) vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0); - if (vt8500_port->clk) { + if (!IS_ERR(vt8500_port->clk)) { vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk); } else { /* use the default of 24Mhz if not specified and warn */ |