staging: delete gma500 driver

It's now "properly" merged into the DRM tree in the kernel, so delete
the staging version of the driver as it is far obsolete and broken.

Requested-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

78 files changed, 0 insertions, 30778 deletions

diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 21e2f4b87f1..b31194c8272 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -120,8 +120,6 @@ source "drivers/staging/cptm1217/Kconfig"
 
 source "drivers/staging/ste_rmi4/Kconfig"
 
-source "drivers/staging/gma500/Kconfig"
-
 source "drivers/staging/mei/Kconfig"
 
 source "drivers/staging/nvec/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 7c5808d7212..b5813c46378 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -52,7 +52,6 @@ obj-$(CONFIG_FT1000)		+= ft1000/
 obj-$(CONFIG_SPEAKUP)		+= speakup/
 obj-$(CONFIG_TOUCHSCREEN_CLEARPAD_TM1217)	+= cptm1217/
 obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4)	+= ste_rmi4/
-obj-$(CONFIG_DRM_PSB)		+= gma500/
 obj-$(CONFIG_INTEL_MEI)		+= mei/
 obj-$(CONFIG_MFD_NVEC)		+= nvec/
 obj-$(CONFIG_DRM_OMAP)		+= omapdrm/
diff --git a/drivers/staging/gma500/Kconfig b/drivers/staging/gma500/Kconfig
deleted file mode 100644
index c7a2b3bc0a1..00000000000
--- a/drivers/staging/gma500/Kconfig
+++ /dev/null
@@ -1,33 +0,0 @@
-config DRM_PSB
-	tristate "Intel GMA5/600 KMS Framebuffer"
-	depends on DRM && PCI && X86 && BROKEN
-	select FB_CFB_COPYAREA
-        select FB_CFB_FILLRECT
-        select FB_CFB_IMAGEBLIT
-        select DRM_KMS_HELPER
-        select DRM_TTM
-	help
-	  Say yes for an experimental 2D KMS framebuffer driver for the
-	  Intel GMA500 ('Poulsbo') and other Intel IMG based graphics
-	  devices.
-
-config DRM_PSB_MRST
-	bool "Intel GMA600 support (Experimental)"
-	depends on DRM_PSB
-	help
-	  Say yes to include support for GMA600 (Intel Moorestown/Oaktrail)
-	  platforms with LVDS ports. HDMI and MIPI are not currently
-	  supported.
-
-config DRM_PSB_MFLD
-	bool "Intel Medfield support (Experimental)"
-	depends on DRM_PSB
-	help
-	  Say yes to include support for Intel Medfield platforms with MIPI
-	  interfaces.
-	
-config DRM_PSB_CDV
-	bool "Intel Cedarview support (Experimental)"
-	depends on DRM_PSB
-	help
-	  Say yes to include support for Intel Cedarview platforms
diff --git a/drivers/staging/gma500/Makefile b/drivers/staging/gma500/Makefile
deleted file mode 100644
index c729868b1b1..00000000000
--- a/drivers/staging/gma500/Makefile
+++ /dev/null
@@ -1,52 +0,0 @@
-#
-#	KMS driver for the GMA500
-#
-ccflags-y += -Iinclude/drm
-
-psb_gfx-y += gem_glue.o \
-	  accel_2d.o \
-	  backlight.o \
-	  framebuffer.o \
-	  gem.o \
-	  gtt.o \
-	  intel_bios.o \
-	  intel_i2c.o \
-	  intel_opregion.o \
-	  mmu.o \
-	  power.o \
-	  psb_drv.o \
-	  psb_intel_display.o \
-	  psb_intel_lvds.o \
-	  psb_intel_modes.o \
-	  psb_intel_sdvo.o \
-	  psb_lid.o \
-	  psb_irq.o \
-	  psb_device.o \
-	  mid_bios.o
-
-psb_gfx-$(CONFIG_DRM_PSB_CDV) +=  cdv_device.o \
-	  cdv_intel_crt.o \
-	  cdv_intel_display.o \
-	  cdv_intel_hdmi.o \
-	  cdv_intel_lvds.o
-
-psb_gfx-$(CONFIG_DRM_PSB_MRST) += mrst_device.o \
-	  mrst_crtc.o \
-	  mrst_lvds.o \
-	  mrst_hdmi.o \
-	  mrst_hdmi_i2c.o
-
-psb_gfx-$(CONFIG_DRM_PSB_MFLD) += mdfld_device.o \
-	  mdfld_output.o \
-	  mdfld_pyr_cmd.o \
-	  mdfld_tmd_vid.o \
-	  mdfld_tpo_cmd.o \
-	  mdfld_tpo_vid.o \
-	  mdfld_dsi_pkg_sender.o \
-	  mdfld_dsi_dpi.o \
-	  mdfld_dsi_output.o \
-	  mdfld_dsi_dbi.o \
-	  mdfld_dsi_dbi_dpu.o \
-	  mdfld_intel_display.o
-
-obj-$(CONFIG_DRM_PSB) += psb_gfx.o
diff --git a/drivers/staging/gma500/TODO b/drivers/staging/gma500/TODO
deleted file mode 100644
index fc836158e74..00000000000
--- a/drivers/staging/gma500/TODO
+++ /dev/null
@@ -1,15 +0,0 @@
--	Sort out the power management side. Not important for Poulsbo but
-	matters for Moorestown/Medfield
--	Debug Oaktrail/Moorestown support (single pipe, no BIOS on mrst,
-					some other differences)
--	Add 2D acceleration via console and DRM
--	Add scrolling acceleration using the GTT to do remapping on the main
-	framebuffer.
--	HDMI testing
--	Oaktrail HDMI and other features
--	Oaktrail MIPI
--	Medfield needs a lot of further love
-
-As per kernel policy and the in the interest of the safety of various
-kittens there is no support or plans to add hooks for the closed user space
-stuff.
diff --git a/drivers/staging/gma500/accel_2d.c b/drivers/staging/gma500/accel_2d.c
deleted file mode 100644
index b8f78ebbb14..00000000000
--- a/drivers/staging/gma500/accel_2d.c
+++ /dev/null
@@ -1,414 +0,0 @@
-/**************************************************************************
- * Copyright (c) 2007-2011, Intel Corporation.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
- * develop this driver.
- *
- **************************************************************************/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/tty.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/console.h>
-
-#include <drm/drmP.h>
-#include <drm/drm.h>
-#include <drm/drm_crtc.h>
-
-#include "psb_drv.h"
-#include "psb_reg.h"
-#include "framebuffer.h"
-
-/**
- *	psb_spank		-	reset the 2D engine
- *	@dev_priv: our PSB DRM device
- *
- *	Soft reset the graphics engine and then reload the necessary registers.
- *	We use this at initialisation time but it will become relevant for
- *	accelerated X later
- */
-void psb_spank(struct drm_psb_private *dev_priv)
-{
-	PSB_WSGX32(_PSB_CS_RESET_BIF_RESET | _PSB_CS_RESET_DPM_RESET |
-		_PSB_CS_RESET_TA_RESET | _PSB_CS_RESET_USE_RESET |
-		_PSB_CS_RESET_ISP_RESET | _PSB_CS_RESET_TSP_RESET |
-		_PSB_CS_RESET_TWOD_RESET, PSB_CR_SOFT_RESET);
-	PSB_RSGX32(PSB_CR_SOFT_RESET);
-
-	msleep(1);
-
-	PSB_WSGX32(0, PSB_CR_SOFT_RESET);
-	wmb();
-	PSB_WSGX32(PSB_RSGX32(PSB_CR_BIF_CTRL) | _PSB_CB_CTRL_CLEAR_FAULT,
-		   PSB_CR_BIF_CTRL);
-	wmb();
-	(void) PSB_RSGX32(PSB_CR_BIF_CTRL);
-
-	msleep(1);
-	PSB_WSGX32(PSB_RSGX32(PSB_CR_BIF_CTRL) & ~_PSB_CB_CTRL_CLEAR_FAULT,
-		   PSB_CR_BIF_CTRL);
-	(void) PSB_RSGX32(PSB_CR_BIF_CTRL);
-	PSB_WSGX32(dev_priv->gtt.gatt_start, PSB_CR_BIF_TWOD_REQ_BASE);
-}
-
-/**
- *	psb2_2d_wait_available	-	wait for FIFO room
- *	@dev_priv: our DRM device
- *	@size: size (in dwords) of the command we want to issue
- *
- *	Wait until there is room to load the FIFO with our data. If the
- *	device is not responding then reset it
- */
-static int psb_2d_wait_available(struct drm_psb_private *dev_priv,
-			  unsigned size)
-{
-	uint32_t avail = PSB_RSGX32(PSB_CR_2D_SOCIF);
-	unsigned long t = jiffies + HZ;
-
-	while (avail < size) {
-		avail = PSB_RSGX32(PSB_CR_2D_SOCIF);
-		if (time_after(jiffies, t)) {
-			psb_spank(dev_priv);
-			return -EIO;
-		}
-	}
-	return 0;
-}
-
-/**
- *	psb_2d_submit		-	submit a 2D command
- *	@dev_priv: our DRM device
- *	@cmdbuf: command to issue
- *	@size: length (in dwords)
- *
- *	Issue one or more 2D commands to the accelerator. This needs to be
- *	serialized later when we add the GEM interfaces for acceleration
- */
-static int psbfb_2d_submit(struct drm_psb_private *dev_priv, uint32_t *cmdbuf,
-								unsigned size)
-{
-	int ret = 0;
-	int i;
-	unsigned submit_size;
-	unsigned long flags;
-
-	spin_lock_irqsave(&dev_priv->lock_2d, flags);
-	while (size > 0) {
-		submit_size = (size < 0x60) ? size : 0x60;
-		size -= submit_size;
-		ret = psb_2d_wait_available(dev_priv, submit_size);
-		if (ret)
-			break;
-
-		submit_size <<= 2;
-
-		for (i = 0; i < submit_size; i += 4)
-			PSB_WSGX32(*cmdbuf++, PSB_SGX_2D_SLAVE_PORT + i);
-
-		(void)PSB_RSGX32(PSB_SGX_2D_SLAVE_PORT + i - 4);
-	}
-	spin_unlock_irqrestore(&dev_priv->lock_2d, flags);
-	return ret;
-}
-
-
-/**
- *	psb_accel_2d_copy_direction	-	compute blit order
- *	@xdir: X direction of move
- *	@ydir: Y direction of move
- *
- *	Compute the correct order setings to ensure that an overlapping blit
- *	correctly copies all the pixels.
- */
-static u32 psb_accel_2d_copy_direction(int xdir, int ydir)
-{
-	if (xdir < 0)
-		return (ydir < 0) ? PSB_2D_COPYORDER_BR2TL :
-						PSB_2D_COPYORDER_TR2BL;
-	else
-		return (ydir < 0) ? PSB_2D_COPYORDER_BL2TR :
-						PSB_2D_COPYORDER_TL2BR;
-}
-
-/**
- *	psb_accel_2d_copy		-	accelerated 2D copy
- *	@dev_priv: our DRM device
- *	@src_offset in bytes
- *	@src_stride in bytes
- *	@src_format psb 2D format defines
- *	@dst_offset in bytes
- *	@dst_stride in bytes
- *	@dst_format psb 2D format defines
- *	@src_x offset in pixels
- *	@src_y offset in pixels
- *	@dst_x offset in pixels
- *	@dst_y offset in pixels
- *	@size_x of the copied area
- *	@size_y of the copied area
- *
- *	Format and issue a 2D accelerated copy command.
- */
-static int psb_accel_2d_copy(struct drm_psb_private *dev_priv,
-			     uint32_t src_offset, uint32_t src_stride,
-			     uint32_t src_format, uint32_t dst_offset,
-			     uint32_t dst_stride, uint32_t dst_format,
-			     uint16_t src_x, uint16_t src_y,
-			     uint16_t dst_x, uint16_t dst_y,
-			     uint16_t size_x, uint16_t size_y)
-{
-	uint32_t blit_cmd;
-	uint32_t buffer[10];
-	uint32_t *buf;
-	uint32_t direction;
-
-	buf = buffer;
-
-	direction =
-	    psb_accel_2d_copy_direction(src_x - dst_x, src_y - dst_y);
-
-	if (direction == PSB_2D_COPYORDER_BR2TL ||
-	    direction == PSB_2D_COPYORDER_TR2BL) {
-		src_x += size_x - 1;
-		dst_x += size_x - 1;
-	}
-	if (direction == PSB_2D_COPYORDER_BR2TL ||
-	    direction == PSB_2D_COPYORDER_BL2TR) {
-		src_y += size_y - 1;
-		dst_y += size_y - 1;
-	}
-
-	blit_cmd =
-	    PSB_2D_BLIT_BH |
-	    PSB_2D_ROT_NONE |
-	    PSB_2D_DSTCK_DISABLE |
-	    PSB_2D_SRCCK_DISABLE |
-	    PSB_2D_USE_PAT | PSB_2D_ROP3_SRCCOPY | direction;
-
-	*buf++ = PSB_2D_FENCE_BH;
-	*buf++ =
-	    PSB_2D_DST_SURF_BH | dst_format | (dst_stride <<
-					       PSB_2D_DST_STRIDE_SHIFT);
-	*buf++ = dst_offset;
-	*buf++ =
-	    PSB_2D_SRC_SURF_BH | src_format | (src_stride <<
-					       PSB_2D_SRC_STRIDE_SHIFT);
-	*buf++ = src_offset;
-	*buf++ =
-	    PSB_2D_SRC_OFF_BH | (src_x << PSB_2D_SRCOFF_XSTART_SHIFT) |
-	    (src_y << PSB_2D_SRCOFF_YSTART_SHIFT);
-	*buf++ = blit_cmd;
-	*buf++ =
-	    (dst_x << PSB_2D_DST_XSTART_SHIFT) | (dst_y <<
-						  PSB_2D_DST_YSTART_SHIFT);
-	*buf++ =
-	    (size_x << PSB_2D_DST_XSIZE_SHIFT) | (size_y <<
-						  PSB_2D_DST_YSIZE_SHIFT);
-	*buf++ = PSB_2D_FLUSH_BH;
-
-	return psbfb_2d_submit(dev_priv, buffer, buf - buffer);
-}
-
-/**
- *	psbfb_copyarea_accel	-	copyarea acceleration for /dev/fb
- *	@info: our framebuffer
- *	@a: copyarea parameters from the framebuffer core
- *
- *	Perform a 2D copy via the accelerator
- */
-static void psbfb_copyarea_accel(struct fb_info *info,
-				 const struct fb_copyarea *a)
-{
-	struct psb_fbdev *fbdev = info->par;
-	struct psb_framebuffer *psbfb = &fbdev->pfb;
-	struct drm_device *dev = psbfb->base.dev;
-	struct drm_framebuffer *fb = fbdev->psb_fb_helper.fb;
-	struct drm_psb_private *dev_priv = dev->dev_private;
-	uint32_t offset;
-	uint32_t stride;
-	uint32_t src_format;
-	uint32_t dst_format;
-
-	if (!fb)
-		return;
-
-	offset = psbfb->gtt->offset;
-	stride = fb->pitches[0];
-
-	switch (fb->depth) {
-	case 8:
-		src_format = PSB_2D_SRC_332RGB;
-		dst_format = PSB_2D_DST_332RGB;
-		break;
-	case 15:
-		src_format = PSB_2D_SRC_555RGB;
-		dst_format = PSB_2D_DST_555RGB;
-		break;
-	case 16:
-		src_format = PSB_2D_SRC_565RGB;
-		dst_format = PSB_2D_DST_565RGB;
-		break;
-	case 24:
-	case 32:
-		/* this is wrong but since we don't do blending its okay */
-		src_format = PSB_2D_SRC_8888ARGB;
-		dst_format = PSB_2D_DST_8888ARGB;
-		break;
-	default:
-		/* software fallback */
-		cfb_copyarea(info, a);
-		return;
-	}
-
-	if (!gma_power_begin(dev, false)) {
-		cfb_copyarea(info, a);
-		return;
-	}
-	psb_accel_2d_copy(dev_priv,
-			  offset, stride, src_format,
-			  offset, stride, dst_format,
-			  a->sx, a->sy, a->dx, a->dy, a->width, a->height);
-	gma_power_end(dev);
-}
-
-/**
- *	psbfb_copyarea	-	2D copy interface
- *	@info: our framebuffer
- *	@region: region to copy
- *
- *	Copy an area of the framebuffer console either by the accelerator
- *	or directly using the cfb helpers according to the request
- */
-void psbfb_copyarea(struct fb_info *info,
-			   const struct fb_copyarea *region)
-{
-	if (unlikely(info->state != FBINFO_STATE_RUNNING))
-		return;
-
-	/* Avoid the 8 pixel erratum */
-	if (region->width == 8 || region->height == 8 ||
-		(info->flags & FBINFO_HWACCEL_DISABLED))
-		return cfb_copyarea(info, region);
-
-	psbfb_copyarea_accel(info, region);
-}
-
-/**
- *	psbfb_sync	-	synchronize 2D
- *	@info: our framebuffer
- *
- *	Wait for the 2D engine to quiesce so that we can do CPU
- *	access to the framebuffer again
- */
-int psbfb_sync(struct fb_info *info)
-{
-	struct psb_fbdev *fbdev = info->par;
-	struct psb_framebuffer *psbfb = &fbdev->pfb;
-	struct drm_device *dev = psbfb->base.dev;
-	struct drm_psb_priva