Merge tag 'orion_dt_for_3.8' of git://git.infradead.org/users/jcooper/linux into next/dt

From Jason Cooper:
orion dt for v3.8

 - ehci-orion dt binding
 - gpio-poweroff
 - use dt regulators
 - move mpp to DT/pinctrl

Depends on:

 - orion/boards

    - merge conflicts
       - keep all 'select's in Kconfig
       - remove all #includes in board-*.c

 - pinctrl/devel up to:

    - 06763c7 pinctrl: mvebu: move to its own directory

* tag 'orion_dt_for_3.8' of git://git.infradead.org/users/jcooper/linux: (211 commits)
  ARM: Kirkwood: remove kirkwood_ehci_init() from new boards
  ARM: Kirkwood: Add support LED of OpenBlocks A6
  ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6
  ARM: kirkwood: Add NAND partiton map for OpenBlocks A6
  ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6
  ARM: kirkwood: Add support DT of second I2C bus
  ARM: kirkwood: Convert mplcec4 board to pinctrl
  ARM: Kirkwood: Convert km_kirkwood to pinctrl
  ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl
  ARM: Kirkwood: Convert IX2-200 to pinctrl.
  ARM: Kirkwood: Convert lsxl boards to pinctrl.
  ARM: Kirkwood: Convert ib62x0 to pinctrl.
  ARM: Kirkwood: Convert GoFlex Net to pinctrl.
  ARM: Kirkwood: Convert dreamplug to pinctrl.
  ARM: Kirkwood: Convert dockstar to pinctrl.
  ARM: Kirkwood: Convert dnskw to pinctrl
  ARM: Kirkwood: Convert iConnect to pinctrl.
  ARM: Kirkwood: Convert TS219 to pinctrl.
  ARM: Kirkwood: Add DTSI files for pinctrl
  ARM: Kirkwood: Make use of mvebu pincltl and gpio drivers
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

69 files changed, 1190 insertions, 718 deletions

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index fc2de5528dc..b00000e8aef 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -67,6 +67,7 @@ static struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3304) },
 	{ USB_DEVICE(0x0930, 0x0215) },
 	{ USB_DEVICE(0x0489, 0xE03D) },
+	{ USB_DEVICE(0x0489, 0xE027) },
 
 	/* Atheros AR9285 Malbec with sflash firmware */
 	{ USB_DEVICE(0x03F0, 0x311D) },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index debda27df9b..ee82f2fb65f 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -124,6 +124,7 @@ static struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
+	{ USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE },
 
 	/* Atheros AR9285 Malbec with sflash firmware */
 	{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
diff --git a/drivers/bus/omap-ocp2scp.c b/drivers/bus/omap-ocp2scp.c
index ff63560b846..0c48b0e05ed 100644
--- a/drivers/bus/omap-ocp2scp.c
+++ b/drivers/bus/omap-ocp2scp.c
@@ -22,6 +22,26 @@
 #include <linux/pm_runtime.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/platform_data/omap_ocp2scp.h>
+
+/**
+ * _count_resources - count for the number of resources
+ * @res: struct resource *
+ *
+ * Count and return the number of resources populated for the device that is
+ * connected to ocp2scp.
+ */
+static unsigned _count_resources(struct resource *res)
+{
+	int cnt	= 0;
+
+	while (res->start != res->end) {
+		cnt++;
+		res++;
+	}
+
+	return cnt;
+}
 
 static int ocp2scp_remove_devices(struct device *dev, void *c)
 {
@@ -34,20 +54,62 @@ static int ocp2scp_remove_devices(struct device *dev, void *c)
 
 static int __devinit omap_ocp2scp_probe(struct platform_device *pdev)
 {
-	int			ret;
-	struct device_node	*np = pdev->dev.of_node;
+	int ret;
+	unsigned res_cnt, i;
+	struct device_node *np = pdev->dev.of_node;
+	struct platform_device *pdev_child;
+	struct omap_ocp2scp_platform_data *pdata = pdev->dev.platform_data;
+	struct omap_ocp2scp_dev *dev;
 
 	if (np) {
 		ret = of_platform_populate(np, NULL, NULL, &pdev->dev);
 		if (ret) {
-			dev_err(&pdev->dev, "failed to add resources for ocp2scp child\n");
+			dev_err(&pdev->dev,
+			    "failed to add resources for ocp2scp child\n");
 			goto err0;
 		}
+	} else if (pdata) {
+		for (i = 0, dev = *pdata->devices; i < pdata->dev_cnt; i++,
+		    dev++) {
+			res_cnt = _count_resources(dev->res);
+
+			pdev_child = platform_device_alloc(dev->drv_name,
+			    PLATFORM_DEVID_AUTO);
+			if (!pdev_child) {
+				dev_err(&pdev->dev,
+				  "failed to allocate mem for ocp2scp child\n");
+				goto err0;
+			}
+
+			ret = platform_device_add_resources(pdev_child,
+			    dev->res, res_cnt);
+			if (ret) {
+				dev_err(&pdev->dev,
+				 "failed to add resources for ocp2scp child\n");
+				goto err1;
+			}
+
+			pdev_child->dev.parent	= &pdev->dev;
+
+			ret = platform_device_add(pdev_child);
+			if (ret) {
+				dev_err(&pdev->dev,
+				   "failed to register ocp2scp child device\n");
+				goto err1;
+			}
+		}
+	} else {
+		dev_err(&pdev->dev, "OCP2SCP initialized without plat data\n");
+		return -EINVAL;
 	}
+
 	pm_runtime_enable(&pdev->dev);
 
 	return 0;
 
+err1:
+	platform_device_put(pdev_child);
+
 err0:
 	device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices);
 
diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c
index ca4a25ed844..e2c17d187d9 100644
--- a/drivers/clk/ux500/u8500_clk.c
+++ b/drivers/clk/ux500/u8500_clk.c
@@ -40,7 +40,7 @@ void u8500_clk_init(void)
 				CLK_IS_ROOT|CLK_IGNORE_UNUSED,
 				32768);
 	clk_register_clkdev(clk, "clk32k", NULL);
-	clk_register_clkdev(clk, NULL, "rtc-pl031");
+	clk_register_clkdev(clk, "apb_pclk", "rtc-pl031");
 
 	/* PRCMU clocks */
 	fw_version = prcmu_get_fw_version();
@@ -228,10 +228,17 @@ void u8500_clk_init(void)
 
 	clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", U8500_CLKRST1_BASE,
 				BIT(2), 0);
+	clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.1");
+
 	clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", U8500_CLKRST1_BASE,
 				BIT(3), 0);
+	clk_register_clkdev(clk, "apb_pclk", "msp0");
+	clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.0");
+
 	clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", U8500_CLKRST1_BASE,
 				BIT(4), 0);
+	clk_register_clkdev(clk, "apb_pclk", "msp1");
+	clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.1");
 
 	clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", U8500_CLKRST1_BASE,
 				BIT(5), 0);
@@ -239,6 +246,7 @@ void u8500_clk_init(void)
 
 	clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", U8500_CLKRST1_BASE,
 				BIT(6), 0);
+	clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.2");
 
 	clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", U8500_CLKRST1_BASE,
 				BIT(7), 0);
@@ -246,6 +254,7 @@ void u8500_clk_init(void)
 
 	clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", U8500_CLKRST1_BASE,
 				BIT(8), 0);
+	clk_register_clkdev(clk, "apb_pclk", "slimbus0");
 
 	clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", U8500_CLKRST1_BASE,
 				BIT(9), 0);
@@ -255,11 +264,16 @@ void u8500_clk_init(void)
 
 	clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", U8500_CLKRST1_BASE,
 				BIT(10), 0);
+	clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.4");
+
 	clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", U8500_CLKRST1_BASE,
 				BIT(11), 0);
+	clk_register_clkdev(clk, "apb_pclk", "msp3");
+	clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.3");
 
 	clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", U8500_CLKRST2_BASE,
 				BIT(0), 0);
+	clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.3");
 
 	clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", U8500_CLKRST2_BASE,
 				BIT(1), 0);
@@ -279,12 +293,13 @@ void u8500_clk_init(void)
 
 	clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", U8500_CLKRST2_BASE,
 				BIT(5), 0);
+	clk_register_clkdev(clk, "apb_pclk", "msp2");
+	clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.2");
 
 	clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", U8500_CLKRST2_BASE,
 				BIT(6), 0);
 	clk_register_clkdev(clk, "apb_pclk", "sdi1");
 
-
 	clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", U8500_CLKRST2_BASE,
 				BIT(7), 0);
 	clk_register_clkdev(clk, "apb_pclk", "sdi3");
@@ -316,10 +331,15 @@ void u8500_clk_init(void)
 
 	clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", U8500_CLKRST3_BASE,
 				BIT(1), 0);
+	clk_register_clkdev(clk, "apb_pclk", "ssp0");
+
 	clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", U8500_CLKRST3_BASE,
 				BIT(2), 0);
+	clk_register_clkdev(clk, "apb_pclk", "ssp1");
+
 	clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", U8500_CLKRST3_BASE,
 				BIT(3), 0);
+	clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.0");
 
 	clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", U8500_CLKRST3_BASE,
 				BIT(4), 0);
@@ -401,10 +421,17 @@ void u8500_clk_init(void)
 
 	clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk",
 			U8500_CLKRST1_BASE, BIT(2), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "nmk-i2c.1");
+
 	clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk",
 			U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "msp0");
+	clk_register_clkdev(clk, NULL, "ux500-msp-i2s.0");
+
 	clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk",
 			U8500_CLKRST1_BASE, BIT(4), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "msp1");
+	clk_register_clkdev(clk, NULL, "ux500-msp-i2s.1");
 
 	clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmcclk",
 			U8500_CLKRST1_BASE, BIT(5), CLK_SET_RATE_GATE);
@@ -412,17 +439,25 @@ void u8500_clk_init(void)
 
 	clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk",
 			U8500_CLKRST1_BASE, BIT(6), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "nmk-i2c.2");
+
 	clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk",
-			U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE);
-	/* FIXME: Redefinition of BIT(3). */
+			U8500_CLKRST1_BASE, BIT(8), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "slimbus0");
+
 	clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk",
 			U8500_CLKRST1_BASE, BIT(9), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "nmk-i2c.4");
+
 	clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk",
 			U8500_CLKRST1_BASE, BIT(10), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "msp3");
+	clk_register_clkdev(clk, NULL, "ux500-msp-i2s.3");
 
 	/* Periph2 */
 	clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk",
 			U8500_CLKRST2_BASE, BIT(0), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "nmk-i2c.3");
 
 	clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmcclk",
 			U8500_CLKRST2_BASE, BIT(2), CLK_SET_RATE_GATE);
@@ -430,6 +465,8 @@ void u8500_clk_init(void)
 
 	clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk",
 			U8500_CLKRST2_BASE, BIT(3), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "msp2");
+	clk_register_clkdev(clk, NULL, "ux500-msp-i2s.2");
 
 	clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmcclk",
 			U8500_CLKRST2_BASE, BIT(4), CLK_SET_RATE_GATE);
@@ -450,10 +487,15 @@ void u8500_clk_init(void)
 	/* Periph3 */
 	clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk",
 			U8500_CLKRST3_BASE, BIT(1), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "ssp0");
+
 	clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk",
 			U8500_CLKRST3_BASE, BIT(2), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "ssp1");
+
 	clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk",
 			U8500_CLKRST3_BASE, BIT(3), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "nmk-i2c.0");
 
 	clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmcclk",
 			U8500_CLKRST3_BASE, BIT(4), CLK_SET_RATE_GATE);
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index f11d8e3b404..6dbc4031f82 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -152,7 +152,7 @@ config GPIO_MSM_V2
 
 config GPIO_MVEBU
 	def_bool y
-	depends on ARCH_MVEBU
+	depends on PLAT_ORION
 	select GPIO_GENERIC
 	select GENERIC_IRQ_CHIP
 
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index b726b478a4f..6345878ae1e 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -143,7 +143,7 @@ static void intel_crt_dpms(struct drm_connector *connector, int mode)
 	int old_dpms;
 
 	/* PCH platforms and VLV only support on/off. */
-	if (INTEL_INFO(dev)->gen < 5 && mode != DRM_MODE_DPMS_ON)
+	if (INTEL_INFO(dev)->gen >= 5 && mode != DRM_MODE_DPMS_ON)
 		mode = DRM_MODE_DPMS_OFF;
 
 	if (mode == connector->dpms)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 461a637f1ef..4154bcd7a07 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3841,6 +3841,17 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
 			}
 		}
 
+		if (intel_encoder->type == INTEL_OUTPUT_EDP) {
+			/* Use VBT settings if we have an eDP panel */
+			unsigned int edp_bpc = dev_priv->edp.bpp / 3;
+
+			if (edp_bpc < display_bpc) {
+				DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
+				display_bpc = edp_bpc;
+			}
+			continue;
+		}
+
 		/*
 		 * HDMI is either 12 or 8, so if the display lets 10bpc sneak
 		 * through, clamp it down.  (Note: >12bpc will be caught below.)
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 79d308da29f..c600fb06e25 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2382,6 +2382,18 @@ intel_sdvo_output_setup(struct intel_sdvo *intel_sdvo, uint16_t flags)
 	return true;
 }
 
+static void intel_sdvo_output_cleanup(struct intel_sdvo *intel_sdvo)
+{
+	struct drm_device *dev = intel_sdvo->base.base.dev;
+	struct drm_connector *connector, *tmp;
+
+	list_for_each_entry_safe(connector, tmp,
+				 &dev->mode_config.connector_list, head) {
+		if (intel_attached_encoder(connector) == &intel_sdvo->base)
+			intel_sdvo_destroy(connector);
+	}
+}
+
 static bool intel_sdvo_tv_create_property(struct intel_sdvo *intel_sdvo,
 					  struct intel_sdvo_connector *intel_sdvo_connector,
 					  int type)
@@ -2705,7 +2717,8 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
 				    intel_sdvo->caps.output_flags) != true) {
 		DRM_DEBUG_KMS("SDVO output failed to setup on %s\n",
 			      SDVO_NAME(intel_sdvo));
-		goto err;
+		/* Output_setup can leave behind connectors! */
+		goto err_output;
 	}
 
 	/* Only enable the hotplug irq if we need it, to work around noisy
@@ -2718,12 +2731,12 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
 
 	/* Set the input timing to the screen. Assume always input 0. */
 	if (!intel_sdvo_set_target_input(intel_sdvo))
-		goto err;
+		goto err_output;
 
 	if (!intel_sdvo_get_input_pixel_clock_range(intel_sdvo,
 						    &intel_sdvo->pixel_clock_min,
 						    &intel_sdvo->pixel_clock_max))
-		goto err;
+		goto err_output;
 
 	DRM_DEBUG_KMS("%s device VID/DID: %02X:%02X.%02X, "
 			"clock range %dMHz - %dMHz, "
@@ -2743,6 +2756,9 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
 			(SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N');
 	return true;
 
+err_output:
+	intel_sdvo_output_cleanup(intel_sdvo);
+
 err:
 	drm_encoder_cleanup(&intel_encoder->base);
 	i2c_del_adapter(&intel_sdvo->ddc);
diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c
index ba498f8e47a..010bae19554 100644
--- a/drivers/gpu/drm/radeon/atombios_encoders.c
+++ b/drivers/gpu/drm/radeon/atombios_encoders.c
@@ -1625,7 +1625,7 @@ radeon_atom_encoder_dpms_dig(struct drm_encoder *encoder, int mode)
 			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP, 0, 0);
 			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
 			/* some early dce3.2 boards have a bug in their transmitter control table */
-			if ((rdev->family != CHIP_RV710) || (rdev->family != CHIP_RV730))
+			if ((rdev->family != CHIP_RV710) && (rdev->family != CHIP_RV730))
 				atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
 		}
 		if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)) && connector) {
diff --git a/drivers/gpu/drm/ttm/ttm_page_alloc.c b/drivers/gpu/drm/ttm/ttm_page_alloc.c
index 860dc4813e9..bd2a3b40cd1 100644
--- a/drivers/gpu/drm/ttm/ttm_page_alloc.c
+++ b/drivers/gpu/drm/ttm/ttm_page_alloc.c
@@ -749,7 +749,10 @@ static int ttm_get_pages(struct page **pages, unsigned npages, int flags,
 	/* clear the pages coming from the pool if requested */
 	if (flags & TTM_PAGE_FLAG_ZERO_ALLOC) {
 		list_for_each_entry(p, &plist, lru) {
-			clear_page(page_address(p));
+			if (PageHighMem(p))
+				clear_highpage(p);
+			else
+				clear_page(page_address(p));
 		}
 	}
 
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index bf8260133ea..7d759a43029 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -308,9 +308,7 @@ int ttm_tt_swapin(struct ttm_tt *ttm)
 		if (unlikely(to_page == NULL))
 			goto out_err;
 
-		preempt_disable();
 		copy_highpage(to_page, from_page);
-		preempt_enable();
 		page_cache_release(from_page);
 	}
 
@@ -358,9 +356,7 @@ int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistent_swap_storage)
 			ret = PTR_ERR(to_page);
 			goto out_err;
 		}
-		preempt_disable();
 		copy_highpage(to_page, from_page);
-		preempt_enable();
 		set_page_dirty(to_page);
 		mark_page_accessed(to_page);
 		page_cache_release(to_page);
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
index b07ca2e4d0