Merge master.kernel.org:/home/rmk/linux-2.6-arm

19 files changed, 402 insertions, 84 deletions

diff --git a/drivers/Makefile b/drivers/Makefile
index ea410b6b764..7fc3f0f08b2 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_ACPI)		+= acpi/
 # PnP must come after ACPI since it will eventually need to check if acpi
 # was used and do nothing if so
 obj-$(CONFIG_PNP)		+= pnp/
+obj-$(CONFIG_ARM_AMBA)		+= amba/
 
 # char/ comes before serial/ etc so that the VT console is the boot-time
 # default.
diff --git a/drivers/amba/Makefile b/drivers/amba/Makefile
new file mode 100644
index 00000000000..40fe74097be
--- /dev/null
+++ b/drivers/amba/Makefile
@@ -0,0 +1,2 @@
+obj-y		+= bus.o
+
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
new file mode 100644
index 00000000000..1bbdd1693d5
--- /dev/null
+++ b/drivers/amba/bus.c
@@ -0,0 +1,359 @@
+/*
+ *  linux/arch/arm/common/amba.c
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/amba/bus.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#define to_amba_device(d)	container_of(d, struct amba_device, dev)
+#define to_amba_driver(d)	container_of(d, struct amba_driver, drv)
+
+static struct amba_id *
+amba_lookup(struct amba_id *table, struct amba_device *dev)
+{
+	int ret = 0;
+
+	while (table->mask) {
+		ret = (dev->periphid & table->mask) == table->id;
+		if (ret)
+			break;
+		table++;
+	}
+
+	return ret ? table : NULL;
+}
+
+static int amba_match(struct device *dev, struct device_driver *drv)
+{
+	struct amba_device *pcdev = to_amba_device(dev);
+	struct amba_driver *pcdrv = to_amba_driver(drv);
+
+	return amba_lookup(pcdrv->id_table, pcdev) != NULL;
+}
+
+#ifdef CONFIG_HOTPLUG
+static int amba_uevent(struct device *dev, char **envp, int nr_env, char *buf, int bufsz)
+{
+	struct amba_device *pcdev = to_amba_device(dev);
+
+	if (nr_env < 2)
+		return -ENOMEM;
+
+	snprintf(buf, bufsz, "AMBA_ID=%08x", pcdev->periphid);
+	*envp++ = buf;
+	*envp++ = NULL;
+	return 0;
+}
+#else
+#define amba_uevent NULL
+#endif
+
+static int amba_suspend(struct device *dev, pm_message_t state)
+{
+	struct amba_driver *drv = to_amba_driver(dev->driver);
+	int ret = 0;
+
+	if (dev->driver && drv->suspend)
+		ret = drv->suspend(to_amba_device(dev), state);
+	return ret;
+}
+
+static int amba_resume(struct device *dev)
+{
+	struct amba_driver *drv = to_amba_driver(dev->driver);
+	int ret = 0;
+
+	if (dev->driver && drv->resume)
+		ret = drv->resume(to_amba_device(dev));
+	return ret;
+}
+
+/*
+ * Primecells are part of the Advanced Microcontroller Bus Architecture,
+ * so we call the bus "amba".
+ */
+static struct bus_type amba_bustype = {
+	.name		= "amba",
+	.match		= amba_match,
+	.uevent		= amba_uevent,
+	.suspend	= amba_suspend,
+	.resume		= amba_resume,
+};
+
+static int __init amba_init(void)
+{
+	return bus_register(&amba_bustype);
+}
+
+postcore_initcall(amba_init);
+
+/*
+ * These are the device model conversion veneers; they convert the
+ * device model structures to our more specific structures.
+ */
+static int amba_probe(struct device *dev)
+{
+	struct amba_device *pcdev = to_amba_device(dev);
+	struct amba_driver *pcdrv = to_amba_driver(dev->driver);
+	struct amba_id *id;
+
+	id = amba_lookup(pcdrv->id_table, pcdev);
+
+	return pcdrv->probe(pcdev, id);
+}
+
+static int amba_remove(struct device *dev)
+{
+	struct amba_driver *drv = to_amba_driver(dev->driver);
+	return drv->remove(to_amba_device(dev));
+}
+
+static void amba_shutdown(struct device *dev)
+{
+	struct amba_driver *drv = to_amba_driver(dev->driver);
+	drv->shutdown(to_amba_device(dev));
+}
+
+/**
+ *	amba_driver_register - register an AMBA device driver
+ *	@drv: amba device driver structure
+ *
+ *	Register an AMBA device driver with the Linux device model
+ *	core.  If devices pre-exist, the drivers probe function will
+ *	be called.
+ */
+int amba_driver_register(struct amba_driver *drv)
+{
+	drv->drv.bus = &amba_bustype;
+
+#define SETFN(fn)	if (drv->fn) drv->drv.fn = amba_##fn
+	SETFN(probe);
+	SETFN(remove);
+	SETFN(shutdown);
+
+	return driver_register(&drv->drv);
+}
+
+/**
+ *	amba_driver_unregister - remove an AMBA device driver
+ *	@drv: AMBA device driver structure to remove
+ *
+ *	Unregister an AMBA device driver from the Linux device
+ *	model.  The device model will call the drivers remove function
+ *	for each device the device driver is currently handling.
+ */
+void amba_driver_unregister(struct amba_driver *drv)
+{
+	driver_unregister(&drv->drv);
+}
+
+
+static void amba_device_release(struct device *dev)
+{
+	struct amba_device *d = to_amba_device(dev);
+
+	if (d->res.parent)
+		release_resource(&d->res);
+	kfree(d);
+}
+
+#define amba_attr(name,fmt,arg...)				\
+static ssize_t show_##name(struct device *_dev, struct device_attribute *attr, char *buf)	\
+{								\
+	struct amba_device *dev = to_amba_device(_dev);		\
+	return sprintf(buf, fmt, arg);				\
+}								\
+static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL)
+
+amba_attr(id, "%08x\n", dev->periphid);
+amba_attr(irq0, "%u\n", dev->irq[0]);
+amba_attr(irq1, "%u\n", dev->irq[1]);
+amba_attr(resource, "\t%08lx\t%08lx\t%08lx\n",
+	  dev->res.start, dev->res.end, dev->res.flags);
+
+/**
+ *	amba_device_register - register an AMBA device
+ *	@dev: AMBA device to register
+ *	@parent: parent memory resource
+ *
+ *	Setup the AMBA device, reading the cell ID if present.
+ *	Claim the resource, and register the AMBA device with
+ *	the Linux device manager.
+ */
+int amba_device_register(struct amba_device *dev, struct resource *parent)
+{
+	u32 pid, cid;
+	void __iomem *tmp;
+	int i, ret;
+
+	dev->dev.release = amba_device_release;
+	dev->dev.bus = &amba_bustype;
+	dev->dev.dma_mask = &dev->dma_mask;
+	dev->res.name = dev->dev.bus_id;
+
+	if (!dev->dev.coherent_dma_mask && dev->dma_mask)
+		dev_warn(&dev->dev, "coherent dma mask is unset\n");
+
+	ret = request_resource(parent, &dev->res);
+	if (ret == 0) {
+		tmp = ioremap(dev->res.start, SZ_4K);
+		if (!tmp) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		for (pid = 0, i = 0; i < 4; i++)
+			pid |= (readl(tmp + 0xfe0 + 4 * i) & 255) << (i * 8);
+		for (cid = 0, i = 0; i < 4; i++)
+			cid |= (readl(tmp + 0xff0 + 4 * i) & 255) << (i * 8);
+
+		iounmap(tmp);
+
+		if (cid == 0xb105f00d)
+			dev->periphid = pid;
+
+		if (dev->periphid)
+			ret = device_register(&dev->dev);
+		else
+			ret = -ENODEV;
+
+		if (ret == 0) {
+			device_create_file(&dev->dev, &dev_attr_id);
+			if (dev->irq[0] != NO_IRQ)
+				device_create_file(&dev->dev, &dev_attr_irq0);
+			if (dev->irq[1] != NO_IRQ)
+				device_create_file(&dev->dev, &dev_attr_irq1);
+			device_create_file(&dev->dev, &dev_attr_resource);
+		} else {
+ out:
+			release_resource(&dev->res);
+		}
+	}
+	return ret;
+}
+
+/**
+ *	amba_device_unregister - unregister an AMBA device
+ *	@dev: AMBA device to remove
+ *
+ *	Remove the specified AMBA device from the Linux device
+ *	manager.  All files associated with this object will be
+ *	destroyed, and device drivers notified that the device has
+ *	been removed.  The AMBA device's resources including
+ *	the amba_device structure will be freed once all
+ *	references to it have been dropped.
+ */
+void amba_device_unregister(struct amba_device *dev)
+{
+	device_unregister(&dev->dev);
+}
+
+
+struct find_data {
+	struct amba_device *dev;
+	struct device *parent;
+	const char *busid;
+	unsigned int id;
+	unsigned int mask;
+};
+
+static int amba_find_match(struct device *dev, void *data)
+{
+	struct find_data *d = data;
+	struct amba_device *pcdev = to_amba_device(dev);
+	int r;
+
+	r = (pcdev->periphid & d->mask) == d->id;
+	if (d->parent)
+		r &= d->parent == dev->parent;
+	if (d->busid)
+		r &= strcmp(dev->bus_id, d->busid) == 0;
+
+	if (r) {
+		get_device(dev);
+		d->dev = pcdev;
+	}
+
+	return r;
+}
+
+/**
+ *	amba_find_device - locate an AMBA device given a bus id
+ *	@busid: bus id for device (or NULL)
+ *	@parent: parent device (or NULL)
+ *	@id: peripheral ID (or 0)
+ *	@mask: peripheral ID mask (or 0)
+ *
+ *	Return the AMBA device corresponding to the supplied parameters.
+ *	If no device matches, returns NULL.
+ *
+ *	NOTE: When a valid device is found, its refcount is
+ *	incremented, and must be decremented before the returned
+ *	reference.
+ */
+struct amba_device *
+amba_find_device(const char *busid, struct device *parent, unsigned int id,
+		 unsigned int mask)
+{
+	struct find_data data;
+
+	data.dev = NULL;
+	data.parent = parent;
+	data.busid = busid;
+	data.id = id;
+	data.mask = mask;
+
+	bus_for_each_dev(&amba_bustype, NULL, &data, amba_find_match);
+
+	return data.dev;
+}
+
+/**
+ *	amba_request_regions - request all mem regions associated with device
+ *	@dev: amba_device structure for device
+ *	@name: name, or NULL to use driver name
+ */
+int amba_request_regions(struct amba_device *dev, const char *name)
+{
+	int ret = 0;
+
+	if (!name)
+		name = dev->dev.driver->name;
+
+	if (!request_mem_region(dev->res.start, SZ_4K, name))
+		ret = -EBUSY;
+
+	return ret;
+}
+
+/**
+ *	amba_release_regions - release mem regions assoicated with device
+ *	@dev: amba_device structure for device
+ *
+ *	Release regions claimed by a successful call to amba_request_regions.
+ */
+void amba_release_regions(struct amba_device *dev)
+{
+	release_mem_region(dev->res.start, SZ_4K);
+}
+
+EXPORT_SYMBOL(amba_driver_register);
+EXPORT_SYMBOL(amba_driver_unregister);
+EXPORT_SYMBOL(amba_device_register);
+EXPORT_SYMBOL(amba_device_unregister);
+EXPORT_SYMBOL(amba_find_device);
+EXPORT_SYMBOL(amba_request_regions);
+EXPORT_SYMBOL(amba_release_regions);
diff --git a/drivers/char/s3c2410-rtc.c b/drivers/char/s3c2410-rtc.c
index 3df7a574267..2e308657f6f 100644
--- a/drivers/char/s3c2410-rtc.c
+++ b/drivers/char/s3c2410-rtc.c
@@ -24,6 +24,7 @@
 #include <linux/interrupt.h>
 #include <linux/rtc.h>
 #include <linux/bcd.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/uaccess.h>
@@ -33,7 +34,6 @@
 
 #include <asm/mach/time.h>
 
-#include <asm/hardware/clock.h>
 #include <asm/arch/regs-rtc.h>
 
 /* need this for the RTC_AF definitions */
diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c
index eb667daee19..9dc54736e4e 100644
--- a/drivers/char/watchdog/s3c2410_wdt.c
+++ b/drivers/char/watchdog/s3c2410_wdt.c
@@ -46,12 +46,12 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/clk.h>
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
 #include <asm/arch/map.h>
-#include <asm/hardware/clock.h>
 
 #undef S3C24XX_VA_WATCHDOG
 #define S3C24XX_VA_WATCHDOG (0)
@@ -397,7 +397,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 		return -ENOENT;
 	}
 
-	clk_use(wdt_clock);
 	clk_enable(wdt_clock);
 
 	/* see if we can actually set the requested timer margin, and if
@@ -444,7 +443,6 @@ static int s3c2410wdt_remove(struct platform_device *dev)
 
 	if (wdt_clock != NULL) {
 		clk_disable(wdt_clock);
-		clk_unuse(wdt_clock);
 		clk_put(wdt_clock);
 		wdt_clock = NULL;
 	}
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 58cfd3111ef..f7d40f8e5f5 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -34,12 +34,12 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/hardware/clock.h>
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/regs-iic.h>
 #include <asm/arch/iic.h>
@@ -738,7 +738,6 @@ static void s3c24xx_i2c_free(struct s3c24xx_i2c *i2c)
 {
 	if (i2c->clk != NULL && !IS_ERR(i2c->clk)) {
 		clk_disable(i2c->clk);
-		clk_unuse(i2c->clk);
 		clk_put(i2c->clk);
 		i2c->clk = NULL;
 	}
@@ -778,7 +777,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 
 	dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk);
 
-	clk_use(i2c->clk);
 	clk_enable(i2c->clk);
 
 	/* map the registers */
diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c
index 9b1ab5e7a98..3df5eedf8f3 100644
--- a/drivers/input/serio/ambakmi.c
+++ b/drivers/input/serio/ambakmi.c
@@ -19,12 +19,12 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/err.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/kmi.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/amba_kmi.h>
-#include <asm/hardware/clock.h>
 
 #define KMI_BASE	(kmi->base)
 
@@ -72,13 +72,9 @@ static int amba_kmi_open(struct serio *io)
 	unsigned int divisor;
 	int ret;
 
-	ret = clk_use(kmi->clk);
-	if (ret)
-		goto out;
-
 	ret = clk_enable(kmi->clk);
 	if (ret)
-		goto clk_unuse;
+		goto out;
 
 	divisor = clk_get_rate(kmi->clk) / 8000000 - 1;
 	writeb(divisor, KMICLKDIV);
@@ -97,8 +93,6 @@ static int amba_kmi_open(struct serio *io)
 
  clk_disable:
 	clk_disable(kmi->clk);
- clk_unuse:
-	clk_unuse(kmi->clk);
  out:
 	return ret;
 }
@@ -111,7 +105,6 @@ static void amba_kmi_close(struct serio *io)
 
 	free_irq(kmi->irq, kmi);
 	clk_disable(kmi->clk);
-	clk_unuse(kmi->clk);
 }
 
 static int amba_kmi_probe(struct amba_device *dev, void *id)
diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c
index 2b10a2d4ae0..634ef53e85a 100644
--- a/drivers/mmc/mmci.c
+++ b/drivers/mmc/mmci.c
@@ -19,14 +19,14 @@
 #include <linux/highmem.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/protocol.h>
+#include <linux/amba/bus.h>
+#include <linux/clk.h>
 
 #include <asm/cacheflush.h>
 #include <asm/div64.h>
 #include <asm/io.h>
 #include <asm/scatterlist.h>
 #include <asm/sizes.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/clock.h>
 #include <asm/mach/mmc.h>
 
 #include "mmci.h"
@@ -494,13 +494,9 @@ static int mmci_probe(struct amba_device *dev, void *id)
 		goto host_free;
 	}
 
-	ret = clk_use(host->clk);
-	if (ret)
-		goto clk_free;
-
 	ret = clk_enable(host->clk);
 	if (ret)
-		goto clk_unuse;
+		goto clk_free;
 
 	host->plat = plat;
 	host->mclk = clk_get_rate(host->clk);
@@ -573,8 +569,6 @@ static int mmci_probe(struct amba_device *dev, void *id)
 	iounmap(host->base);
  clk_disable:
 	clk_disable(host->clk);
- clk_unuse:
-	clk_unuse(host->clk);
  clk_free:
 	clk_put(host->clk);
  host_free:
@@ -609,7 +603,6 @@ static int mmci_remove(struct amba_device *dev)
 
 		iounmap(host->base);
 		clk_disable(host->clk);
-		clk_unuse(host->clk);
 		clk_put(host->clk);
 
 		mmc_free_host(mmc);
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index d209214b131..5b55599739f 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -53,6 +53,7 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/slab.h>
+#include <linux/clk.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -60,7 +61,6 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/io.h>
-#include <asm/hardware/clock.h>
 
 #include <asm/arch/regs-nand.h>
 #include <asm/arch/nand.h>
@@ -460,7 +460,6 @@ static int s3c2410_nand_remove(struct platform_device *pdev)
 
 	if (info->clk != NULL && !IS_ERR(info->clk)) {
 		clk_disable(info->clk);
-		clk_unuse(info->clk);
 		clk_put(info->clk);
 	}
 
@@ -598,7 +597,6 @@ static int s3c24xx_nand_probe(struct platform_device *pdev, int is_s3c2440)
 		goto exit_error;
 	}
 
-	clk_use(info->clk);
 	clk_enable(info->clk);
 
 	/* allocate and map the resource */
diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
index b5fdeec20b1..12a7244a5ec 100644
--- a/drivers/pcmcia/pxa2xx_sharpsl.c
+++ b/drivers/pcmcia/pxa2xx_sharpsl.c
@@ -36,9 +36,18 @@
 struct scoop_pcmcia_config *platform_scoop_config;
 #define SCOOP_DEV platform_scoop_config->devs
 
-static void sharpsl_pcmcia_init_reset(struct scoop_pcmcia_dev *scoopdev)
+static void sharpsl_pcmcia_init_reset(struct soc_pcmcia_socket *skt)
 {
+	struct scoop_pcmcia_dev *scoopdev = &SCOOP_DEV[skt->nr];
+
 	reset_scoop(scoopdev->dev);
+
+	/* Shared power controls need to be handled carefully */
+	if (platform_scoop_config->power_ctrl)
+		platform_scoop_config->power_ctrl(scoopdev->dev, 0x0000, skt->nr);
+	else
+		write_scoop_reg(scoopdev->dev, SCOOP_CPR, 0x0000);
+
 	scoopdev->keep_vs = NO_KEEP_VS;
 	scoopdev->keep_rd = 0;
 }
@@ -208,26 +217,17 @@ static int sharpsl_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 
 static void sharpsl_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
 {
-	sharpsl_pcmcia_init_reset(&SCOOP_DEV[skt->nr]);
+	sharpsl_pcmcia_init_reset(skt);
 
 	/* Enable interrupt */
 	write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_IMR, 0x00C0);
 	write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_MCR, 0x0101);
 	SCOOP_DEV[skt->nr].keep_vs = NO_KEEP_VS;
-
-	if (machine_is_collie())
-		/* We need to disable SS_OUTPUT_ENA here. */
-		write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR, read_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR) & ~0x0080);
 }
 
 static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
 {
-	/* CF_BUS_OFF */
-	sharpsl_pcmcia_init_reset(&SCOOP_DEV[skt->nr]);
-
-	if (machine_is_collie())
-		/* We need to disable SS_OUTPUT_ENA here. */
-		write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR, read_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR) & ~0x0080);
+	sharpsl_pcmcia_init_reset(skt);
 }
 
 static struct pcmcia_low_level sharpsl_pcmcia_ops = {
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index ddd0307fece..48f6e872314 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -47,12 +47,12 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/hardware.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/amba_serial.h>
 
 #define UART_NR		2
 
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index d84476ee659..12967055616 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -47,12 +47,12 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/sizes.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/clock.h>
-#include <asm/hardware/amba_serial.h>
 
 #define UART_NR			14
 
@@ -761,10 +761,6 @@ static int pl011_probe(struct amba_device *dev, void *id)
 		goto unmap;
 	}
 
-	ret = clk_use(uap->clk);
-	if (ret)
-		goto putclk;
-
 	uap->port.dev = &dev->dev;
 	uap->port.mapbase = dev->res.start;
 	uap->port.membase = base;
@@ -782,8 +778,6 @@ static int pl011_probe(struct amba_device *dev, void *id)
 	if (ret) {
 		amba_set_drvdata(dev, NULL);
 		amba_ports[i] = NULL;
-		clk_unuse(uap->clk);
- putclk:
 		clk_put(uap->clk);
  unmap:
 		iounmap(base);
@@ -808,7 +802,6 @@ static int pl011_remove(struct amba_device *dev)
 			amba_ports[i] = NULL;
 
 	iounmap(uap->port.membase);
-	clk_unuse(uap->clk);
 	clk_put(uap->clk);
 	kfree(uap);
 	return 0;
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 47681c4654e..fe83ce6fef5 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -72,12 +72,12 @@
 #include <linux/serial_core.h>
 #include <linux/serial.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
 
 #include <asm/hardware.h>
-#include <asm/hardware/clock.h>
 
 #include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-gpio.h>
@@ -782,11 +782,9 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 
 		if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
 			clk_disable(ourport->baudclk);
-			clk_unuse(ourport->baudclk);
 			ourport->baudclk  = NULL;
 		}
 
-		clk_use(clk);
 		clk_enable(clk);
 
 		ourport->clksrc = clksrc;
@@ -1077,9 +1075,6 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 
 	ourport->clk	= clk_get(&platdev->dev, "uart");
 
-	if (ourport->clk != NULL && !IS_ERR(ourport->clk))
-		clk_use(ourport->clk);
-
 	dbg("port: map=%08x, mem=%08x, irq=%d, clock=%ld\n",
 	    port->mapbase, port->membase, port->irq, port->uartclk);
 
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index c9e29d80871..3785b3f7df1 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -17,6 +17,7 @@
 #include <linux/signal.h>	/* SA_INTERRUPT */
 #include <linux/jiffies.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
@@ -27,7 +28,6 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/fpga.h>
 #include <asm/arch/usb.h>
-#include <asm/hardware/clock.h>
 
 
 /* OMAP-1510 OHCI has its own MMU for DMA */
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 35cc9402adc..372527a8359 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -20,9 +20,9 @@
 */
 
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
-#include <asm/hardware/clock.h>
 #include <asm/arch/usb-control.h>
 
 #define valid_port(idx) ((idx) == 1 || (idx) == 2)
@@ -363,7 +363,6 @@ int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
 		goto err1;
 	}
 
-	clk_use(clk);
 	s3c2410_start_hc(dev, hcd);
 
 	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
@@ -384,7 +383,6 @@ int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
  err2:
 	s3c2410_stop_hc(dev);
 	iounmap(hcd->regs);
-	clk_unuse(clk);
 	clk_put(clk);
 
  err1:
diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index a3c2c45e29e..0da4083ba90 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -21,12 +21,11 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/list.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <linux/clk.h>
 
 #include <asm/sizes.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/clock.h>
-
-#include <asm/hardware/amba_clcd.h>
 
 #define to_clcd(info)	container_of(info, struct clcd_fb, fb)
 
@@ -346,10 +345,6 @@ static int clcdfb_register(struct clcd_fb *fb)
 		goto out;
 	}
 
-	ret = clk_use(fb->clk);
-	if (ret)
-		goto free_clk;
-
 	fb->fb.fix.mmio_start	= fb->dev->res.start;
 	fb->fb.fix.mmio_len	= SZ_4K;
 
@@ -357,7 +352,7 @@ static int clcdfb_register(struct clcd_fb *fb)
 	if (!fb->regs) {
 		printk(KERN_ERR "CLCD: unable to remap registers\n");
 		ret = -ENOMEM;
-		goto unuse_clk;
+		goto free_clk;
 	}
 
 	fb->fb.fbops		= &clcdfb_ops;
@@ -427,8 +422,6 @@ static int clcdfb_register(struct clcd_fb *fb)
 	printk(KERN_ERR "CLCD: cannot register framebuffer (%d)\n", ret);
 
 	iounmap(fb->regs);
- unuse_clk:
-	clk_unuse(fb->clk);
  free_clk:
 	clk_put(fb->clk);
  out:
@@ -489,7 +482,6 @@ static int clcdfb_remove(struct amba_device *dev)
 	clcdfb_disable(fb);
 	unregister_framebuffer(&fb->fb);
 	iounmap(fb->regs);
-	clk_unuse(fb->clk);
 	clk_put(fb->clk);
 
 	fb->board->remove(fb);
diff --git a/drivers/video/backlight/corgi_bl.c b/drivers/video/backlight/corgi_bl.c
index 6a219b2c77e..d0aaf450e8c 100644
--- a/drivers/video/backlight/corgi_bl.c
+++ b/drivers/video/backlight/corgi_bl.c
@@ -20,6 +20,7 @@
 #include <linux/backlight.h>
 
 #include <asm/arch/sharpsl.h>
+#include <asm/hardware/sharpsl_pm.h>
 
 #define CORGI_DEFAULT_INTENSITY		0x1f
 #define CORGI_LIMIT_MASK		0x0b
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 5924cc225c9..1718baaeed2 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -554,7 +554,7 @@ static int __init imxfb_probe(struct platform_device *pdev)
 
 	inf = pdev->dev.platform_data;
 	if(!inf) {
-		dev_err(dev,"No platform_data available\n");
+		dev_err(&pdev->dev,"No platform_data available\n");
 		return -ENOMEM;
 	}
 
@@ -579,7 +579,7 @@ static int __init imxfb_probe(struct platform_device *pdev)
 	if (!inf->fixed_screen_cpu) {
 		ret = imxfb_map_video_memory(info);
 		if (ret) {
-			dev_err(dev, "Failed to allocate video RAM: %d\n", ret);
+			dev_err(&pdev->dev, "Failed to allocate video RAM: %d\n", ret);
 			ret = -ENOMEM;
 			goto failed_map;
 		}
@@ -608,7 +608,7 @@ static int __init imxfb_probe(struct platform_device *pdev)
 	imxfb_set_par(info);
 	ret = register_framebuffer(info);
 	if (ret < 0) {
-		dev_err(dev, "failed to register framebuffer\n");
+		dev_err(&pdev->dev, "failed to register framebuffer\n");
 		goto failed_register;
 	}
 
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index ce6e749db3a..fe99d17a21d 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -87,6 +87,7 @@
 #include <linux/workqueue.h>
 #include <linux/wait.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/uaccess.h>
@@ -96,7 +97,6 @@
 #include <asm/arch/regs-lcd.h>
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/fb.h>
-#include <asm/hardware/clock.h>
 
 #ifdef CONFIG_PM
 #include <linux/pm.h>
@@ -746,7 +746,6 @@ int __init s3c2410fb_probe(struct platform_device *pdev)
 		goto release_irq;
 	}
 
-	clk_use(info->clk);
 	clk_enable(info->clk);
 	dprintk("got and enabled clock\n");
 
@@ -783,7 +782,6 @@ free_video_memory:
 	s3c2410fb_unmap_video_memory(info);
 release_clock:
 	clk_disable(info->clk);
-	clk_unuse(info->clk);
 	clk_put(info->clk);
 release_irq:
 	free_irq(irq,info);
@@ -828,7 +826,6 @@ static int s3c2410fb_remove(struct platform_device *pdev)
 
  	if (info->clk) {
  		clk_disable(info->clk);
- 		clk_unuse(info->clk);
  		clk_put(info->clk);
  		info->clk = NULL;
 	}