Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	drivers/ata/libata-scsi.c
	include/linux/libata.h

Futher merge of Linus's head and compilation fixups.

Signed-Off-By: David Howells <dhowells@redhat.com>

122 files changed, 5600 insertions, 1285 deletions

diff --git a/drivers/Makefile b/drivers/Makefile
index 4ac14dab307..67711770b1d 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -77,3 +77,4 @@ obj-$(CONFIG_CRYPTO)		+= crypto/
 obj-$(CONFIG_SUPERH)		+= sh/
 obj-$(CONFIG_GENERIC_TIME)	+= clocksource/
 obj-$(CONFIG_DMA_ENGINE)	+= dma/
+obj-$(CONFIG_PPC_PS3)		+= ps3/
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index 578b99b71d9..bf5b79ed361 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -27,6 +27,7 @@
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/notifier.h>
+#include <linux/jiffies.h>
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 03f6338acc8..984ab284382 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -328,6 +328,15 @@ config PATA_TRIFLEX
 
 	  If unsure, say N.
 
+config PATA_MARVELL
+	tristate "Marvell PATA support via legacy mode"
+	depends on PCI
+	help
+	  This option enables limited support for the Marvell 88SE6145 ATA
+	  controller.
+
+	  If unsure, say N.
+
 config PATA_MPIIX
 	tristate "Intel PATA MPIIX support"
 	depends on PCI
@@ -483,6 +492,32 @@ config PATA_WINBOND
 
 	  If unsure, say N.
 
+config PATA_WINBOND_VLB
+	tristate "Winbond W83759A VLB PATA support (Experimental)"
+	depends on ISA && EXPERIMENTAL
+	help
+	  Support for the Winbond W83759A controller on Vesa Local Bus
+	  systems.
+
+config PATA_PLATFORM
+	tristate "Generic platform device PATA support"
+	depends on EMBEDDED
+	help
+	  This option enables support for generic directly connected ATA
+	  devices commonly found on embedded systems.
+
+	  If unsure, say N.
+
+config PATA_IXP4XX_CF
+	tristate "IXP4XX Compact Flash support"
+	depends on ARCH_IXP4XX
+	help
+	  This option enables support for a Compact Flash connected on
+	  the ixp4xx expansion bus. This driver had been written for
+	  Loft/Avila boards in mind but can work with others.
+
+	  If unsure, say N.
+
 endif
 endmenu
 
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 72243a677f9..bc3d81ae757 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_PATA_NETCELL)	+= pata_netcell.o
 obj-$(CONFIG_PATA_NS87410)	+= pata_ns87410.o
 obj-$(CONFIG_PATA_OPTI)		+= pata_opti.o
 obj-$(CONFIG_PATA_OPTIDMA)	+= pata_optidma.o
+obj-$(CONFIG_PATA_MARVELL)	+= pata_marvell.o
 obj-$(CONFIG_PATA_MPIIX)	+= pata_mpiix.o
 obj-$(CONFIG_PATA_OLDPIIX)	+= pata_oldpiix.o
 obj-$(CONFIG_PATA_PCMCIA)	+= pata_pcmcia.o
@@ -51,8 +52,11 @@ obj-$(CONFIG_PATA_SERVERWORKS)	+= pata_serverworks.o
 obj-$(CONFIG_PATA_SIL680)	+= pata_sil680.o
 obj-$(CONFIG_PATA_VIA)		+= pata_via.o
 obj-$(CONFIG_PATA_WINBOND)	+= pata_sl82c105.o
+obj-$(CONFIG_PATA_WINBOND_VLB)	+= pata_winbond.o
 obj-$(CONFIG_PATA_SIS)		+= pata_sis.o
 obj-$(CONFIG_PATA_TRIFLEX)	+= pata_triflex.o
+obj-$(CONFIG_PATA_IXP4XX_CF)	+= pata_ixp4xx_cf.o
+obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
 # Should be last but one libata driver
 obj-$(CONFIG_ATA_GENERIC)	+= ata_generic.o
 # Should be last libata driver
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index bddb14e91d3..f36da488a2c 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -53,6 +53,7 @@
 
 enum {
 	AHCI_PCI_BAR		= 5,
+	AHCI_MAX_PORTS		= 32,
 	AHCI_MAX_SG		= 168, /* hardware max is 64K */
 	AHCI_DMA_BOUNDARY	= 0xffffffff,
 	AHCI_USE_CLUSTERING	= 0,
@@ -77,8 +78,9 @@ enum {
 	RX_FIS_UNK		= 0x60, /* offset of Unknown FIS data */
 
 	board_ahci		= 0,
-	board_ahci_vt8251	= 1,
-	board_ahci_ign_iferr	= 2,
+	board_ahci_pi		= 1,
+	board_ahci_vt8251	= 2,
+	board_ahci_ign_iferr	= 3,
 
 	/* global controller registers */
 	HOST_CAP		= 0x00, /* host capabilities */
@@ -167,9 +169,9 @@ enum {
 	AHCI_FLAG_MSI		= (1 << 0),
 
 	/* ap->flags bits */
-	AHCI_FLAG_RESET_NEEDS_CLO	= (1 << 24),
-	AHCI_FLAG_NO_NCQ		= (1 << 25),
-	AHCI_FLAG_IGN_IRQ_IF_ERR	= (1 << 26), /* ignore IRQ_IF_ERR */
+	AHCI_FLAG_NO_NCQ		= (1 << 24),
+	AHCI_FLAG_IGN_IRQ_IF_ERR	= (1 << 25), /* ignore IRQ_IF_ERR */
+	AHCI_FLAG_HONOR_PI		= (1 << 26), /* honor PORTS_IMPL */
 };