Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (65 commits)
  tty: serial: imx: move del_timer_sync() to avoid potential deadlock
  imx: add polled io uart methods
  imx: Add save/restore functions for UART control regs
  serial/imx: let probing fail for the dt case without a valid alias
  serial/imx: propagate error from of_alias_get_id instead of using -ENODEV
  tty: serial: imx: Allow UART to be a source for wakeup
  serial: driver for m32 arch should not have DEC alpha errata
  serial/documentation: fix documented name of DCD cpp symbol
  atmel_serial: fix spinlock lockup in RS485 code
  tty: Fix memory leak in virtual console when enable unicode translation
  serial: use DIV_ROUND_CLOSEST instead of open coding it
  serial: add support for 400 and 800 v3 series Titan cards
  serial: bfin-uart: Remove ASYNC_CTS_FLOW flag for hardware automatic CTS.
  serial: bfin-uart: Enable hardware automatic CTS only when CTS pin is available.
  serial: make FSL errata depend on 8250_CONSOLE, not just 8250
  serial: add irq handler for Freescale 16550 errata.
  serial: manually inline serial8250_handle_port
  serial: make 8250 timeout use the specified IRQ handler
  serial: export the key functions for an 8250 IRQ handler
  serial: clean up parameter passing for 8250 Rx IRQ handling
  ...

38 files changed, 1953 insertions, 564 deletions

diff --git a/drivers/parport/parport_ax88796.c b/drivers/parport/parport_ax88796.c
index 844f6137970..7c5d86696ee 100644
--- a/drivers/parport/parport_ax88796.c
+++ b/drivers/parport/parport_ax88796.c
@@ -420,18 +420,7 @@ static struct platform_driver axdrv = {
 	.resume		= parport_ax88796_resume,
 };
 
-static int __init parport_ax88796_init(void)
-{
-	return platform_driver_register(&axdrv);
-}
-
-static void __exit parport_ax88796_exit(void)
-{
-	platform_driver_unregister(&axdrv);
-}
-
-module_init(parport_ax88796_init)
-module_exit(parport_ax88796_exit)
+module_platform_driver(axdrv);
 
 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
 MODULE_DESCRIPTION("AX88796 Parport parallel port driver");
diff --git a/drivers/parport/parport_sunbpp.c b/drivers/parport/parport_sunbpp.c
index 910c5a26e34..9390a534a2b 100644
--- a/drivers/parport/parport_sunbpp.c
+++ b/drivers/parport/parport_sunbpp.c
@@ -391,21 +391,10 @@ static struct platform_driver bpp_sbus_driver = {
 	.remove		= __devexit_p(bpp_remove),
 };
 
-static int __init parport_sunbpp_init(void)
-{
-	return platform_driver_register(&bpp_sbus_driver);
-}
-
-static void __exit parport_sunbpp_exit(void)
-{
-	platform_driver_unregister(&bpp_sbus_driver);
-}
+module_platform_driver(bpp_sbus_driver);
 
 MODULE_AUTHOR("Derrick J Brashear");
 MODULE_DESCRIPTION("Parport Driver for Sparc bidirectional Port");
 MODULE_SUPPORTED_DEVICE("Sparc Bidirectional Parallel Port");
 MODULE_VERSION("2.0");
 MODULE_LICENSE("GPL");
-
-module_init(parport_sunbpp_init)
-module_exit(parport_sunbpp_exit)
diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c
index cea56033b34..a09ce3ef5d7 100644
--- a/drivers/tty/n_hdlc.c
+++ b/drivers/tty/n_hdlc.c
@@ -417,7 +417,7 @@ static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty)
 				__FILE__,__LINE__,tbuf,tbuf->count);
 			
 		/* Send the next block of data to device */
-		tty->flags |= (1 << TTY_DO_WRITE_WAKEUP);
+		set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
 		actual = tty->ops->write(tty, tbuf->buf, tbuf->count);
 
 		/* rollback was possible and has been done */
@@ -459,7 +459,7 @@ static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty)
 	}
 	
 	if (!tbuf)
-		tty->flags  &= ~(1 << TTY_DO_WRITE_WAKEUP);
+		clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
 	
 	/* Clear the re-entry flag */
 	spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
@@ -491,7 +491,7 @@ static void n_hdlc_tty_wakeup(struct tty_struct *tty)
 		return;
 
 	if (tty != n_hdlc->tty) {
-		tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
+		clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
 		return;
 	}
 
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 39d6ab6551e..d2256d08ee7 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -61,7 +61,7 @@
  * controlling the space in the read buffer.
  */
 #define TTY_THRESHOLD_THROTTLE		128 /* now based on remaining room */
-#define TTY_THRESHOLD_UNTHROTTLE 	128
+#define TTY_THRESHOLD_UNTHROTTLE	128
 
 /*
  * Special byte codes used in the echo buffer to represent operations
@@ -405,7 +405,7 @@ static ssize_t process_output_block(struct tty_struct *tty,
 				    const unsigned char *buf, unsigned int nr)
 {
 	int	space;
-	int 	i;
+	int	i;
 	const unsigned char *cp;
 
 	mutex_lock(&tty->output_lock);
@@ -1607,7 +1607,7 @@ static inline int input_available_p(struct tty_struct *tty, int amt)
 }
 
 /**
- * 	copy_from_read_buf	-	copy read data directly
+ *	copy_from_read_buf	-	copy read data directly
  *	@tty: terminal device
  *	@b: user data
  *	@nr: size of data
@@ -1909,7 +1909,7 @@ do_it_again:
 		if (nr)
 			clear_bit(TTY_PUSH, &tty->flags);
 	} else if (test_and_clear_bit(TTY_PUSH, &tty->flags))
-		 goto do_it_again;
+		goto do_it_again;
 
 	n_tty_set_room(tty);
 	return retval;
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index e18604b3fc7..d8653ab6f49 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -446,19 +446,8 @@ static inline void legacy_pty_init(void) { }
 int pty_limit = NR_UNIX98_PTY_DEFAULT;
 static int pty_limit_min;
 static int pty_limit_max = NR_UNIX98_PTY_MAX;
-static int tty_count;
 static int pty_count;
 
-static inline void pty_inc_count(void)
-{
-	pty_count = (++tty_count) / 2;
-}
-
-static inline void pty_dec_count(void)
-{
-	pty_count = (--tty_count) / 2;
-}
-
 static struct cdev ptmx_cdev;
 
 static struct ctl_table pty_table[] = {
@@ -600,8 +589,7 @@ static int pty_unix98_install(struct tty_driver *driver, struct tty_struct *tty)
 	 */
 	tty_driver_kref_get(driver);
 	tty->count++;
-	pty_inc_count(); /* tty */
-	pty_inc_count(); /* tty->link */
+	pty_count++;
 	return 0;
 err_free_mem:
 	deinitialize_tty_struct(o_tty);
@@ -613,15 +601,19 @@ err_free_tty:
 	return -ENOMEM;
 }
 
-static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
+static void ptm_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
+{
+	pty_count--;
+}
+
+static void pts_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
 {
-	pty_dec_count();
 }
 
 static const struct tty_operations ptm_unix98_ops = {
 	.lookup = ptm_unix98_lookup,
 	.install = pty_unix98_install,
-	.remove = pty_unix98_remove,
+	.remove = ptm_unix98_remove,
 	.open = pty_open,
 	.close = pty_close,
 	.write = pty_write,
@@ -638,7 +630,7 @@ static const struct tty_operations ptm_unix98_ops = {
 static const struct tty_operations pty_unix98_ops = {
 	.lookup = pts_unix98_lookup,
 	.install = pty_unix98_install,
-	.remove = pty_unix98_remove,
+	.remove = pts_unix98_remove,
 	.open = pty_open,
 	.close = pty_close,
 	.write = pty_write,
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index eeadf1b8e09..9f50c4e3c2b 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -129,32 +129,6 @@ static unsigned long probe_rsa[PORT_RSA_MAX];
 static unsigned int probe_rsa_count;
 #endif /* CONFIG_SERIAL_8250_RSA  */
 
-struct uart_8250_port {
-	struct uart_port	port;
-	struct timer_list	timer;		/* "no irq" timer */
-	struct list_head	list;		/* ports on this IRQ */
-	unsigned short		capabilities;	/* port capabilities */
-	unsigned short		bugs;		/* port bugs */
-	unsigned int		tx_loadsz;	/* transmit fifo load size */
-	unsigned char		acr;
-	unsigned char		ier;
-	unsigned char		lcr;
-	unsigned char		mcr;
-	unsigned char		mcr_mask;	/* mask of user bits */
-	unsigned char		mcr_force;	/* mask of forced bits */
-	unsigned char		cur_iotype;	/* Running I/O type */
-
-	/*
-	 * Some bits in registers are cleared on a read, so they must
-	 * be saved whenever the register is read but the bits will not
-	 * be immediately processed.
-	 */
-#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
-	unsigned char		lsr_saved_flags;
-#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
-	unsigned char		msr_saved_flags;
-};
-
 struct irq_info {
 	struct			hlist_node node;
 	int			irq;
@@ -1326,8 +1300,6 @@ static void serial8250_stop_tx(struct uart_port *port)
 	}
 }
 
-static void transmit_chars(struct uart_8250_port *up);
-
 static void serial8250_start_tx(struct uart_port *port)
 {
 	struct uart_8250_port *up =
@@ -1344,7 +1316,7 @@ static void serial8250_start_tx(struct uart_port *port)
 			if ((up->port.type == PORT_RM9000) ?
 				(lsr & UART_LSR_THRE) :
 				(lsr & UART_LSR_TEMT))
-				transmit_chars(up);
+				serial8250_tx_chars(up);
 		}
 	}
 
@@ -1401,11 +1373,16 @@ static void clear_rx_fifo(struct uart_8250_port *up)
 	} while (1);
 }
 
-static void
-receive_chars(struct uart_8250_port *up, unsigned int *status)
+/*
+ * serial8250_rx_chars: processes according to the passed in LSR
+ * value, and returns the remaining LSR bits not handled
+ * by this Rx routine.
+ */
+unsigned char
+serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr)
 {
 	struct tty_struct *tty = up->port.state->port.tty;
-	unsigned char ch, lsr = *status;
+	unsigned char ch;
 	int max_count = 256;
 	char flag;
 
@@ -1481,10 +1458,11 @@ ignore_char:
 	spin_unlock(&up->port.lock);
 	tty_flip_buffer_push(tty);
 	spin_lock(&up->port.lock);
-	*status = lsr;
+	return lsr;
 }
+EXPORT_SYMBOL_GPL(serial8250_rx_chars);
 
-static void transmit_chars(struct uart_8250_port *up)
+void serial8250_tx_chars(struct uart_8250_port *up)
 {
 	struct circ_buf *xmit = &up->port.state->xmit;
 	int count;
@@ -1521,8 +1499,9 @@ static void transmit_chars(struct uart_8250_port *up)
 	if (uart_circ_empty(xmit))
 		__stop_tx(up);
 }
+EXPORT_SYMBOL_GPL(serial8250_tx_chars);
 
-static unsigned int check_modem_status(struct uart_8250_port *up)
+unsigned int serial8250_modem_status(struct uart_8250_port *up)
 {
 	unsigned int status = serial_in(up, UART_MSR);
 
@@ -1544,14 +1523,20 @@ static unsigned int check_modem_status(struct uart_8250_port *up)
 
 	return status;
 }
+EXPORT_SYMBOL_GPL(serial8250_modem_status);
 
 /*
  * This handles the interrupt from one port.
  */
-static void serial8250_handle_port(struct uart_8250_port *up)
+int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 {
-	unsigned int status;
+	unsigned char status;
 	unsigned long flags;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
+
+	if (iir & UART_IIR_NO_INT)
+		return 0;
 
 	spin_lock_irqsave(&up->port.lock, flags);
 
@@ -1560,25 +1545,13 @@ static void serial8250_handle_port(struct uart_8250_port *up)
 	DEBUG_INTR("status = %x...", status);
 
 	if (status & (UART_LSR_DR | UART_LSR_BI))
-		receive_chars(up, &status);
-	check_modem_status(up);
+		status = serial8250_rx_chars(up, status);
+	serial8250_modem_status(up);
 	if (status & UART_LSR_THRE)
-		transmit_chars(up);
+		serial8250_tx_chars(up);
 
 	spin_unlock_irqrestore(&up->port.lock, flags);
-}
-
-int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
-{
-	struct uart_8250_port *up =
-		container_of(port, struct uart_8250_port, port);
-
-	if (!(iir & UART_IIR_NO_INT)) {
-		serial8250_handle_port(up);
-		return 1;
-	}
-
-	return 0;
+	return 1;
 }
 EXPORT_SYMBOL_GPL(serial8250_handle_irq);
 
@@ -1619,11 +1592,13 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
 	do {
 		struct uart_8250_port *up;
 		struct uart_port *port;
+		bool skip;
 
 		up = list_entry(l, struct uart_8250_port, list);
 		port = &up->port;
+		skip = pass_counter && up->port.flags & UPF_IIR_ONCE;
 
-		if (port->handle_irq(port)) {
+		if (!skip && port->handle_irq(port)) {
 			handled = 1;
 			end = NULL;
 		} else if (end == NULL)
@@ -1758,11 +1733,8 @@ static void serial_unlink_irq_chain(struct uart_8250_port *up)
 static void serial8250_timeout(unsigned long data)
 {
 	struct uart_8250_port *up = (struct uart_8250_port *)data;
-	unsigned int iir;
 
-	iir = serial_in(up, UART_IIR);
-	if (!(iir & UART_IIR_NO_INT))
-		serial8250_handle_port(up);
+	up->port.handle_irq(&up->port);
 	mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port));
 }
 
@@ -1801,7 +1773,7 @@ static void serial8250_backup_timeout(unsigned long data)
 	}
 
 	if (!(iir & UART_IIR_NO_INT))
-		transmit_chars(up);
+		serial8250_tx_chars(up);
 
 	if (is_real_interrupt(up->port.irq))
 		serial_out(up, UART_IER, ier);
@@ -1835,7 +1807,7 @@ static unsigned int serial8250_get_mctrl(struct uart_port *port)
 	unsigned int status;
 	unsigned int ret;
 
-	status = check_modem_status(up);
+	status = serial8250_modem_status(up);
 
 	ret = 0;
 	if (status & UART_MSR_DCD)
@@ -2000,7 +1972,7 @@ static int serial8250_startup(struct uart_port *port)
 		serial_outp(up, UART_IER, 0);
 		serial_outp(up, UART_LCR, 0);
 		serial_icr_write(up, UART_CSR, 0); /* Reset the UART */
-		serial_outp(up, UART_LCR, 0xBF);
+		serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B);
 		serial_outp(up, UART_EFR, UART_EFR_ECB);
 		serial_outp(up, UART_LCR, 0);
 	}
@@ -2848,7 +2820,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
 
 	local_irq_save(flags);
 	if (up->port.sysrq) {
-		/* serial8250_handle_port() already took the lock */
+		/* serial8250_handle_irq() already took the lock */
 		locked = 0;
 	} else if (oops_in_progress) {
 		locked = spin_trylock(&up->port.lock);
@@ -2882,7 +2854,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
 	 *	while processing with interrupts off.
 	 */
 	if (up->msr_saved_flags)
-		check_modem_status(up);
+		serial8250_modem_status(up);
 
 	if (locked)
 		spin_unlock(&up->port.lock);
diff --git a/drivers/tty/serial/8250.h b/drivers/tty/serial/8250.h
index 6edf4a6a22d..ae027be57e2 100644
--- a/drivers/tty/serial/8250.h
+++ b/drivers/tty/serial/8250.h
@@ -13,6 +13,32 @@
 
 #include <linux/serial_8250.h>
 
+struct uart_8250_port {
+	struct uart_port	port;
+	struct timer_list	timer;		/* "no irq" timer */
+	struct list_head	list;		/* ports on this IRQ */
+	unsigned short		capabilities;	/* port capabilities */
+	unsigned short		bugs;		/* port bugs */
+	unsigned int		tx_loadsz;	/* transmit fifo load size */
+	unsigned char		acr;
+	unsigned char		ier;
+	unsigned char		lcr;
+	unsigned char		mcr;
+	unsigned char		mcr_mask;	/* mask of user bits */
+	unsigned char		mcr_force;	/* mask of forced bits */
+	unsigned char		cur_iotype;	/* Running I/O type */
+
+	/*
+	 * Some bits in registers are cleared on a read, so they must
+	 * be saved whenever the register is read but the bits will not
+	 * be immediately processed.
+	 */
+#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
+	unsigned char		lsr_saved_flags;
+#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
+	unsigned char		msr_saved_flags;
+};
+
 struct old_serial_port {
 	unsigned int uart;
 	unsigned int baud_base;
diff --git a/drivers/tty/serial/8250_dw.c b/drivers/tty/serial/8250_dw.c
index bf1fba640c2..f574eef3075 100644
--- a/drivers/tty/serial/8250_dw.c
+++ b/drivers/tty/serial/8250_dw.c
@@ -177,17 +177,7 @@ static struct platform_driver dw8250_platform_driver = {
 	.remove			= __devexit_p(dw8250_remove),
 };
 
-static int __init dw8250_init(void)
-{
-	return platform_driver_register(&dw8250_platform_driver);
-}
-module_init(dw8250_init);
-
-static void __exit dw8250_exit(void)
-{
-	platform_driver_unregister(&dw8250_platform_driver);
-}
-module_exit(dw8250_exit);
+module_platform_driver(dw8250_platform_driver);
 
 MODULE_AUTHOR("Jamie Iles");
 MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/8250_fsl.c b/drivers/tty/serial/8250_fsl.c
new file mode 100644
index 00000000000..f4d3c47b88e
--- /dev/null
+++ b/drivers/tty/serial/8250_fsl.c
@@ -0,0 +1,63 @@
+#include <linux/serial_reg.h>
+#include <linux/serial_8250.h>
+
+#include "8250.h"
+
+/*
+ * Freescale 16550 UART "driver", Copyright (C) 2011 Paul Gortmaker.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This isn't a full driver; it just provides an alternate IRQ
+ * handler to deal with an errata.  Everything else is just
+ * using the bog standard 8250 support.
+ *
+ * We follow code flow of serial8250_default_handle_irq() but add
+ * a check for a break and insert a dummy read on the Rx for the
+ * immediately following IRQ event.
+ *
+ * We re-use the already existing "bug handling" lsr_saved_flags
+ * field to carry the "what we just did" information from the one
+ * IRQ event to the next one.
+ */
+
+int fsl8250_handle_irq(struct uart_port *port)
+{
+	unsigned char lsr, orig_lsr;
+	unsigned long flags;
+	unsigned int iir;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
+
+	spin_lock_irqsave(&up->port.lock, flags);
+
+	iir = port->serial_in(port, UART_IIR);
+	if (iir & UART_IIR_NO_INT) {
+		spin_unlock_irqrestore(&up->port.lock, flags);
+		return 0;
+	}
+
+	/* This is the WAR; if last event was BRK, then read and return */
+	if (unlikely(up->lsr_saved_flags & UART_LSR_BI)) {
+		up->lsr_saved_flags &= ~UART_LSR_BI;
+		port->serial_in(port, UART_RX);
+		spin_unlock_irqrestore(&up->port.lock, flags);
+		return 1;
+	}
+
+	lsr = orig_lsr = up->port.serial_in(&up->port, UART_LSR);
+
+	if (lsr & (UART_LSR_DR | UART_LSR_BI))
+		lsr = serial8250_rx_chars(up, lsr);
+
+	serial8250_modem_status(up);
+
+	if (lsr & UART_LSR_THRE)
+		serial8250_tx_chars(up);
+
+	up->lsr_saved_flags = orig_lsr;
+	spin_unlock_irqrestore(&up->port.lock, flags);
+	return 1;
+}
diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c
index 825937a5f21..da2b0b0a183 100644
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -1092,6 +1092,14 @@ static int skip_tx_en_setup(struct serial_private *priv,
 	return pci_default_setup(priv, board, port, idx);
 }
 
+static int kt_serial_setup(struct serial_private *priv,
+			   const struct pciserial_board *board,
+			   struct uart_port *port, int idx)
+{
+	port->flags |= UPF_IIR_ONCE;
+	return skip_tx_en_setup(priv, board, port, idx);
+}
+
 static int pci_eg20t_init(struct pci_dev *dev)
 {
 #if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE)
@@ -1110,7 +1118,18 @@ pci_xr17c154_setup(struct serial_private *priv,
 	return pci_default_setup(priv, board, port, idx);
 }
 
-/* This should be in linux/pci_ids.h */
+static int try_enable_msi(struct pci_dev *dev)
+{
+	/* use msi if available, but fallback to legacy otherwise */
+	pci_enable_msi(dev);
+	return 0;
+}
+
+static void disable_msi(struct pci_dev *dev)
+{
+	pci_disable_msi(dev);
+}
+
 #define PCI_VENDOR_ID_SBSMODULARIO	0x124B
 #define PCI_SUBVENDOR_ID_SBSMODULARIO	0x124B
 #define PCI_DEVICE_ID_OCTPRO		0x0001
@@ -1133,9 +1152,14 @@ pci_xr17c154_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_TITAN_800E	0xA014
 #define PCI_DEVICE_ID_TITAN_200EI	0xA016
 #define PCI_DEVICE_ID_TITAN_200EISI	0xA017
+#define PCI_DEVICE_ID_TITAN_400V3	0xA310
+#define PCI_DEVICE_ID_TITAN_410V3	0xA312
+#define PCI_DEVICE_ID_TITAN_800V3	0xA314
+#define PCI_DEVICE_ID_TITAN_800V3B	0xA315
 #define PCI_DEVICE_ID_OXSEMI_16PCI958	0x9538
 #define PCIE_DEVICE_ID_NEO_2_OX_IBM	0x00F6
 #define PCI_DEVICE_ID_PLX_CRONYX_OMEGA	0xc001
+#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d
 
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
@@ -1220,6 +1244,15 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.setup		= ce4100_serial_setup,
 	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_PATSBURG_KT,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= try_enable_msi,
+		.setup		= kt_serial_setup,
+		.exit		= disable_msi,
+	},
 	/*
 	 * ITE
 	 */
@@ -3414,6 +3447,18 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_oxsemi_2_4000000 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400V3,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_410V3,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3B,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
 
 	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 95b21a61990..113fccf8251 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -97,6 +97,11 @@ config SERIAL_8250_PNP
 	  This builds standard PNP serial support. You may be able to
 	  disable this feature if you only need legacy serial support.
 
+config SERIAL_8250_FSL
+	bool
+	depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550
+	default PPC
+
 config SERIAL_8250_HP300
 	tristate
 	depends on SERIAL_8250 && HP300
@@ -535,6 +540,27 @@ config SERIAL_S5PV210
 	help
 	  Serial port support for Samsung's S5P Family of SoC's
 
+config SERIAL_SIRFSOC
+        tristate "SiRF SoC Platform Serial port support"
+        depends on ARM && ARCH_PRIMA2
+        select SERIAL_CORE
+        help
+          Support for the on-chip UART on the CSR SiRFprimaII series,
+          providing /dev/ttySiRF0, 1 and 2 (note, some machines may not
+          provide all of these ports, depending on how the serial port
+          pins are configured).
+
+config SERIAL_SIRFSOC_CONSOLE
+        bool "Support for console on SiRF SoC serial port"
+        depends on SERIAL_SIRFSOC=y
+        select SERIAL_CORE_CONSOLE
+        help
+          Even if you say Y here, the currently visible virtual console
+          (/dev/tty0) will still be used as the system console by default, but
+          you can alter that using a kernel command line option such as
+          "console=ttySiRFx". (Try "man bootparam" or see the documentation of
+          your boot loader about how to pass options to the kernel at
+          boot time.)
 
 config SERIAL_MAX3100
 	tristate "MAX3100 support"
@@ -1324,7 +1350,7 @@ config SERIAL_OF_PLATFORM
 
 config SERIAL_OMAP
 	tristate "OMAP serial port support"
-	depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
+	depends on ARCH_OMAP2PLUS
 	select SERIAL_CORE
 	help
 	  If you have a machine based on an Texas Instruments OMAP CPU you
@@ -1575,6 +1601,15 @@ config SERIAL_PCH_UART
 	  ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
 	  ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
 
+config SERIAL_PCH_UART_CONSOLE
+	bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
+	depends on SERIAL_PCH_UART=y
+	select SERIAL_CORE_CONSOLE
+	help
+	  Say Y here if you wish to use the PCH UART as the system console
+	  (the system  console is the device which receives all kernel messages and
+	  warnings and which allows logins in single user mode).
+
 config SERIAL_MSM_SMD
 	bool "Enable tty device interface for some SMD ports"
 	default n
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index e10cf5b54b6..75eadb8d717 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
 obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
 obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
 obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
+obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o
 obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o
 obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
 obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
@@ -94,3 +95,4 @@ obj-$(CONFIG_SERIAL_MSM_SMD)	+= msm_smd_tty.o
 obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o
 obj-$(CONFIG_SERIAL_LANTIQ)	+= lantiq.o
 obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o
+obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 4c823f341d9..10605ecc99a 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -212,8 +212,9 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
 {
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 	unsigned int mode;
+	unsigned long flags;
 
-	spin_lock(&port->lock);
+	spin_lock_irqsave(&port->lock, flags);
 
 	/* Disable interrupts */
 	UART_PUT_IDR(port, atmel_port->tx_done_mask);
@@ -244,7 +245,7 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
 	/* Enable interrupts */
 	UART_PUT_IER(port, atmel_port->tx_done_mask);
 
-	spin_unlock(&port->lock);
+	spin_unlock_irqrestore(&port->lock, flags);
 
 }
 
@@ -1256,12 +1257,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 
 static void atmel_set_ldisc(struct uart_port *port, int new)
 {
-	int line = port->line;
-
-	if (line >= port->state->port.tty->driver->num)
-		return;
-
-	if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+	if (new == N_PPS) {
 		port->flags |= UPF_HARDPPS_CD;
 		atmel_enable_ms(port);
 	} else {
diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c
index ee101c0d358..7fbc3a08f10 100644
--- a/drivers/tty/serial/bfin_sport_uart.c
+++ b/drivers/tty/serial/bfin_sport_uart.c
@@ -299,8 +299,13 @@ static int sport_startup(struct uart_port *port)
 			dev_info(port->dev, "Unable to attach BlackFin UART over SPORT CTS interrupt. So, disable it.\n");
 		}
 	}
-	if (up->rts_pin >= 0)
-		gpio_direction_output(up->rts_pin, 0);
+	if (up->rts_pin >= 0) {
+		if (gpio_request(up->rts_pin, DRV_NAME)) {
+			dev_info(port->dev, "fail to request RTS PIN at GPIO_%d\n", up->rts_pin);
+			up->rts_pin = -1;
+		} else
+			gpio_direction_output(up->rts_pin, 0);
+	}
 #endif
 
 	return 0;
@@ -445,6 +450,8 @@ static void sport_shutdown(struct uart_port *port)
 #ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
 	if (up->cts_pin >= 0)
 		free_irq(gpio_to_irq(up->cts_pin), up);
+	if (up->rts_pin >= 0)
+		gpio_free(up->rts_pin);
 #endif
 }
 
@@ -803,17 +810,16 @@ static int __devinit sport_uart_probe(struct platform_device *pdev)
 		res = platform_get_resource(pdev, IORESOURCE_IO, 0);
 		if (res == NULL)
 			sport->cts_pin = -1;
-		else
+		else {
 			sport->cts_pin = res->start;
+			sport->port.flags |= ASYNC_CTS_FLOW;
+		}
 
 		res = platform_get_resource(pdev, IORESOURCE_IO, 1);
 		if (res == NULL)
 			sport->rts_pin = -1;
 		else
 			sport->rts_pin = res->start;
-
-		if (sport->rts_pin >= 0)
-			gpio_request(sport->rts_pin, DRV_NAME);
 #endif
 	}
 
@@ -853,10 +859,6 @@ static int __devexit sport_uart_remove(struct platform_device *pdev)
 
 	if (sport) {
 		uart_remove_one_port(&sport_uart_reg, &sport->port);
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-		if (sport->rts_pin >= 0)
-			gpio_free(sport->rts_pin);
-#endif
 		iounmap(sport->port.membase);
 		peripheral_free_list(
 			(unsigned short *)pdev->dev.platform_data);
diff --git a/drivers/tty/serial/bfin_sport_uart.h b/drivers/tty/serial/bfin_sport_uart.h
index 6d06ce1d567..e4510ea135c 100644
--- a/drivers/tty/serial/bfin_sport_uart.h
+++ b/drivers/tty/serial/bfin_sport_uart.h
@@ -45,11 +45,12 @@
 #define SPORT_GET_RX32(sport) \
 ({ \
 	unsigned int __ret; \
+	unsigned long flags; \
 	if (ANOMALY_05000473) \
-		local_irq_disable(); \
+		local_irq_save(flags); \
 	__ret = bfin_read32((sport)->port.membase + OFFSET_RX); \
 	if (ANOMALY_05000473) \
-		local_irq_enable(); \
+		local_irq_restore(flags); \
 	__ret; \
 })
 #define SPORT_GET_RCR1(sport)		bfin_read16(((sport)->port.membase + OFFSET_RCR1))
diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
index 66afb98b77b..26953bfa692 100644
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -116,15 +116,22 @@ static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
 static irqreturn_t bfin_serial_mctrl_cts_int(int irq, void *dev_id)
 {
 	struct bfin_serial_port *uart = dev_id;
-	unsigned int status;
-
-	status = bfin_serial_get_mctrl(&uart->port);
-	uart_handle_cts_change(&uart->port, status & TIOCM_CTS);
+	unsigned int status = bfin_serial_get_mctrl(&uart->port);
 #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
-	uart->scts = 1;
+	struct tty_struct *tty = uart->port.state->port.tty;
+
 	UART_CLEAR_SCTS(uart);
-	UART_CLEAR_IER(uart, EDSSI);
+	if (tty->hw_stopped) {
+		if (status) {
+			tty->hw_stopped = 0;
+			uart_write_wakeup(&uart->port);
+		}
+	} else {
+		if (!status)
+			tty->hw_stopped = 1;
+	}
 #endif
+	uart_handle_cts_change(&uart->port, status & TIOCM_CTS);
 
 	return IRQ_HANDLED;
 }
@@ -175,13 +182,6 @@ static void bfin_serial_start_tx(struct uart_port *port)
 	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
 	struct tty_struct *tty = uart->port.state->port.tty;
 
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
-	if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) {
-		uart->scts = 0;
-		uart_handle_cts_change(&uart->port, uart->scts);
-	}
-#endif
-
 	/*
 	 * To avoid losting RX interrupt, we reset IR function
 	 * before sending data.
@@ -380,12 +380,6 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id)
 {
 	struct bfin_serial_port *uart = dev_id;
 
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
-	if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) {
-		uart->scts = 0;
-		uart_handle_cts_change(&uart->port, uart->scts);
-	}
-#endif
 	spin_lock(&uart->port.lock);
 	if (UART_GET_LSR(uart) & THRE)
 		bfin_serial_tx_chars(uart);
@@ -531,13 +525,6 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
 	struct bfin_serial_port *uart = dev_id;
 	struct circ_buf *xmit = &uart->port.state->xmit;
 
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
-	if (uart->scts && !(bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
-		uart->scts = 0;
-		uart_handle_cts_change(&uart->port, uart->scts);
-	}
-#endif
-
 	spin_lock(&uart->port.lock);
 	if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) {
 		disable_dma(uart->tx_dma_channel);
@@ -739,20 +726,26 @@ static int bfin_serial_startup(struct uart_port *port)
 			pr_info("Unable to attach BlackFin UART CTS interrupt. So, disable it.\n");
 		}
 	}
-	if (uart->rts_pin >= 0)
-		gpio_direction_output(uart->rts_pin, 0);
+	if (uart->rts_pin >= 0) {
+		if (gpio_request(uart->rts_pin, DRIVER_NAME)) {
+			pr_info("fail to request RTS PIN at GPIO_%d\n", uart->rts_pin);
+			uart->rts_pin = -1;
+		} else
+			gpio_direction_output(uart->rts_pin, 0);
+	}
 #endif
 #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
-	if (uart->cts_pin >= 0 && request_irq(uart->status_irq,
-		bfin_serial_mctrl_cts_int,
-		0, "BFIN_UART_MODEM_STATUS", uart)) {
-		uart->cts_pin = -1;
-		pr_info("Unable to attach BlackFin UART Modem Status interrupt.\n");
-	}
+	if (uart->cts_pin >= 0) {
+		if (request_irq(uart->status_irq, bfin_serial_mctrl_cts_int,
+			IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) {
+			uart->cts_pin = -1;
+			dev_info(port->dev, "Unable to attach BlackFin UART Modem Status interrupt.\n");
+		}
 
-	/* CTS RTS PINs are negative assertive. */
-	UART_PUT_MCR(uart, ACTS);
-	UART_SET_IER(uart, EDSSI);
+		/* CTS RTS PINs are negative assertive. */
+		UART_PUT_MCR(uart, ACTS);
+		UART_SET_IER(uart, EDSSI);
+	}
 #endif
 
 	UART_SET_IER(uart, ERBFI);
@@ -792,6 +785,8 @@ static void bfin_serial_shutdown(struct uart_port *port)
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	if (uart->cts_pin >= 0)
 		free_irq(gpio_to_irq(uart->cts_pin), uart);
+	if (uart->rts_pin >= 0)
+		gpio_free(uart->rts_pin);
 #endif
 #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
 	if (uart->cts_pin >= 0)
@@ -1370,18 +1365,18 @@ static int bfin_serial_probe(struct platform_device *pdev)
 		res = platform_get_resource(pdev, IORESOURCE_IO, 0);
 		if (res == NULL)
 			uart->cts_pin = -1;
-		else
+		else {
 			uart->cts_pin = res->start;
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+			uart->port.flags |= ASYNC_CTS_FLOW;
+#endif
+		}
 
 		res = platform_get_resource(pdev, IORESOURCE_IO, 1);
 		if (res == NULL)
 			uart->rts_pin = -1;
 		else
 			uart->rts_pin = res->start;
-# if defined(CONFIG_SERIAL_BFIN_CTSRTS)
-		if (uart->rts_pin >= 0)
-			gpio_request(uart->rts_pin, DRIVER_NAME);
-# endif
 #endif
 	}
 
@@ -1421,10 +1416,6 @@ static int __devexit bfin_serial_remove(struct platform_device *pdev)
 
 	if (uart) {
 		uart_remove_one_port(&bfin_serial_reg, &uart->port);
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-		if (uart->rts_pin >= 0)
-			gpio_free(uart->rts_pin);
-#endif
 		iounmap(uart->port.membase);
 		peripheral_free_list(
 			(unsigned short *)pdev->dev.platform_data);
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index 426434e5eb7..7e925e20cba 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -1334,7 +1334,6 @@ MODULE_DEVICE_TABLE(spi, ifx_id_table);
 static const struct spi_driver ifx_spi_driver = {
 	.driver = {
 		.name = DRVNAME,
-		.bus = &spi_bus_type,
 		.pm = &ifx_spi_pm,
 		.owner = THIS_MODULE},
 	.probe = ifx_spi_spi_probe,
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 163fc9021f5..0b7fed746b2 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -102,6 +102,7 @@
 #define  UCR2_STPB       (1<<6)	 /* Stop */
 #define  UCR2_WS         (1<<5)	 /* Word size */
 #define  UCR2_RTSEN      (1<<4)	 /* Request to send interrupt enable */
+#define  UCR2_ATEN       (1<<3)  /* Aging Timer Enable */
 #define  UCR2_TXEN       (1<<2)	 /* Transmitter enabled */
 #define  UCR2_RXEN       (1<<1)	 /* Receiver enabled */
 #define  UCR2_SRST 	 (1<<0)	 /* SW reset */
@@ -207,6 +208,12 @@ struct imx_port {
 	struct imx_uart_data	*devdata;
 };
 
+struct imx_port_ucrs {
+	unsigned int	ucr1;
+	unsigned int	ucr2;
+	unsigned int	ucr3;
+};
+
 #ifdef CONFIG_IRDA
 #define USE_IRDA(sport)	((sport)->use_irda)
 #else
@@ -260,6 +267,27 @@ static inline int is_imx21_uart(struct imx_port *sport)
 }
 
 /*
+ * Save and restore functions for UCR1, UCR2 and UCR3 registers
+ */
+static void imx_port_ucrs_save(struct uart_port *port,
+			       struct imx_port_ucrs *ucr)
+{
+	/* save control registers */
+	ucr->ucr1 = readl(port->membase + UCR1);
+	ucr->ucr2 = readl(port->membase + UCR2);
+	ucr->ucr3 = readl(port->membase + UCR3);
+}
+
+static void imx_port_ucrs_restore(struct uart_port *port,
+				  struct imx_port_ucrs *ucr)
+{
+	/* restore control registers */
+	writel(ucr->ucr1, port->membase + UCR1);
+	writel(ucr->ucr2, port->membase + UCR2);
+	writel(ucr->ucr3, port->membase + UCR3);
+}
+
+/*
  * Handle any change of modem status signal since we were last called.
  */
 static void imx_mctrl_check(struct imx_port *sport)
@@ -566,6 +594,9 @@ static irqreturn_t imx_int(int irq, void *dev_id)
 	if (sts & USR1_RTSD)
 		imx_rtsint(irq, dev_id);
 
+	if (sts & USR1_AWAKE)
+		writel(USR1_AWAKE, sport->port.membase + USR1);
+
 	return IRQ_HANDLED;
 }
 
@@ -901,6 +932,8 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
 			ucr2 |= UCR2_PROE;
 	}
 
+	del_timer_sync(&sport->timer);
+
 	/*
 	 * Ask the core to calculate the divisor for us.
 	 */
@@ -931,8 +964,6 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
 			sport->port.ignore_status_mask |= URXD_OVRRUN;
 	}
 
-	del_timer_sync(&sport->timer);
-
 	/*
 	 * Update the per-port timeout.
 	 */
@@ -1079,6 +1110,70 @@ imx_verify_port(struct uart_port *port, struct serial_struct *ser)
 	return ret;
 }
 
+#if defined(CONFIG_CONSOLE_POLL)
+static int imx_poll_get_char(struct uart_port *port)
+{
+	struct imx_port_ucrs old_ucr;
+	unsigned int status;
+	unsigned char c;
+
+	/* save control registers */
+	imx_port_ucrs_save(port, &old_ucr);
+
+	/* disable interrupts */
+	writel(UCR1_UARTEN, port->membase + UCR1);
+	writel(old_ucr.ucr2 & ~(UCR2_ATEN | UCR2_RTSEN | UCR2_ESCI),
+	       port->membase + UCR2);
+	writel(old_ucr.ucr3 & ~(UCR3_DCD | UCR3_RI | UCR3_DTREN),
+	       port->membase + UCR3);
+
+	/* poll */
+	do {
+		status = readl(port->membase + USR2);
+	} while (~status & USR2_RDR);
+
+	/* read */
+	c = readl(port->membase + URXD0);
+
+	/* restore control registers */
+	imx_port_ucrs_restore(port, &old_ucr);
+
+	return c;
+}
+
+static void imx_poll_put_char(struct uart_port *port, unsigned char c)
+{
+	struct imx_port_ucrs old_ucr;
+	unsigned int status;
+
+	/* save control registers */
+	imx_port_ucrs_save(port, &old_ucr);
+
+	/* disable interrupts */
+	writel(UCR1_UARTEN, port->membase + UCR1);
+	writel(old_ucr.ucr2 & ~(UCR2_ATEN | UCR2_RTSEN | UCR2_ESCI),
+	       port->membase + UCR2);
+	writel(old_ucr.ucr3 & ~(UCR3_DCD | UCR3_RI | UCR3_DTREN),
+	       port->membase + UCR3);
+
+	/* drain */
+	do {
+		status = readl(port->membase + USR1);
+	} while (~status & USR1_TRDY);
+
+	/* write */
+	writel(c, port->membase + URTX0);
+
+	/* flush */
+	do {
+		status = readl(port->membase + USR2);
+	} while (~status & USR2_TXDC);
+
+	/* restore control registers */
+	imx_port_ucrs_restore(port, &old_ucr);
+}
+#endif
+
 static struct uart_ops imx_pops = {
 	.tx_empty	= imx_tx_empty,
 	.set_mctrl	= imx_set_mctrl,
@@ -1096,6 +1191,10 @@ static struct uart_ops imx_pops = {
 	.request_port	= imx_request_port,
 	.config_port	= imx_config_port,
 	.verify_port	= imx_verify_port,
+#if defined(CONFIG_CONSOLE_POLL)
+	.poll_get_char  = imx_poll_get_char,
+	.poll_put_char  = imx_poll_put_char,
+#endif
 };
 
 static struct imx_port *imx_ports[UART_NR];
@@ -1118,13 +1217,14 @@ static void
 imx_console_write(struct console *co, const char *s, unsigned int count)
 {
 	struct imx_port *sport = imx_ports[co->index];
-	unsigned int old_ucr1, old_ucr2, ucr1;
+	struct imx_port_ucrs old_ucr;
+	unsigned int ucr1;
 
 	/*
-	 *	First, save UCR1/2 and then disable interrupts
+	 *	First, save UCR1/2/3 and then disable interrupts
 	 */
-	ucr1 = old_ucr1 = readl(sport->port.membase + UCR1);
-	old_ucr2 = readl(sport->port.membase + UCR2);
+	imx_port_ucrs_save(&sport->port, &old_ucr);
+	ucr1 = old_ucr.ucr1;
 
 	if (is_imx1_uart(sport))
 		ucr1 |= IMX1_UCR1_UARTCLKEN;
@@ -1133,18 +1233,17 @@ imx_console_write(struct console *co, const char *s, unsigned int count)
 
 	writel(ucr1, sport->port.membase + UCR1);
 
-	writel(old_ucr2 | UCR2_TXEN, sport->port.membase + UCR2);
+	writel(old_ucr.ucr2 | UCR2_TXEN, sport->port.membase + UCR2);
 
 	uart_console_write(&sport->port, s, count, imx_console_putchar);
 
 	/*
 	 *	Finally, wait for transmitter to become empty
-	 *	and restore UCR1/2
+	 *	and restore UCR1/2/3
 	 */
 	while (!(readl(sport->port.membase + USR2) & USR2_TXDC));
 
-	writel(old_ucr1, sport->port.membase + UCR1);
-	writel(old_ucr2, sport->port.membase + UCR2);
+	imx_port_ucrs_restore(&sport->port, &old_ucr);
 }
 
 /*
@@ -1269,6 +1368,12 @@ static struct uart_driver imx_reg = {
 static int serial_imx_suspend(struct platform_device *dev, pm_message_t state)
 {
 	struct imx_port *sport = platform_get_drvdata(dev);
+	unsigned int val;
+
+	/* enable wakeup from i.MX UART */
+	val = readl(sport->port.membase + UCR3);
+	val |= UCR3_AWAKEN;
+	writel(val, sport->port.membase + UCR3);
 
 	if (sport)
 		uart_suspend_port(&imx_reg, &sport->port);
@@ -1279,6 +1384,12 @@ static int serial_imx_suspend(struct platform_device *dev, pm_message_t state)
 static int serial_imx_resume(struct platform_device *dev)
 {
 	struct imx_port *sport = platform_get_drvdata(dev);
+	unsigned int val;
+
+	/* disable wakeup from i.MX UART */
+	val = readl(sport->port.membase + UCR3);
+	val &= ~UCR3_AWAKEN;
+	writel(val, sport->port.membase + UCR3);
 
 	if (sport)
 		uart_resume_port(&imx_reg, &sport->port);
@@ -1287,6 +1398,10 @@ static int serial_imx_resume(struct platform_device *dev)
 }
 
 #ifdef CONFIG_OF
+/*
+ * This function returns 1 iff pdev isn't a device instatiated by dt, 0 iff it
+ * could successfully get all information from dt or a negative errno.
+ */
 static int serial_imx_probe_dt(struct imx_port *sport,
 		struct platform_device *pdev)
 {
@@ -1296,12 +1411,13 @@ static int serial_imx_probe_dt(struct imx_port *sport,
 	int ret;
 
 	if (!np)
-		return -ENODEV;
+		/* no device tree device */
+		return 1;
 
 	ret = of_alias_get_id(np, "serial");
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
-		return -ENODEV;
+		return ret;
 	}
 	sport->port.line = ret;
 
@@ -1319,7 +1435,7 @@ static int serial_imx_probe_dt(struct imx_port *sport,
 static inline int serial_imx_probe_dt(struct imx_port *sport,
 		struct platform_device *pdev)
 {
-	return -ENODEV;
+	return 1;
 }
 #endif
 
@@ -1354,8 +1470,10 @@ static int serial_imx_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	ret = serial_imx_probe_dt(sport, pdev);
-	if (ret == -ENODEV)
+	if (ret > 0)
 		serial_imx_probe_pdata(sport, pdev);
+	else if (ret < 0)
+		goto free;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
@@ -1476,7 +1594,7 @@ static int __init imx_serial_init(void)
 	if (ret != 0)
 		uart_unregister_driver(&imx_reg);
 
-	return 0;
+	return ret;
 }
 
 static void __exit imx_serial_exit(void)
diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c
index 08018934e01..94a6792bf97 100644
--- a/drivers/tty/serial/m32r_sio.c
+++ b/drivers/tty/serial/m32r_sio.c
@@ -1000,11 +1000,8 @@ static void __init m32r_sio_register_ports(struct uart_driver *drv)
 		init_timer(&up->timer);
 		up->timer.function = m32r_sio_timeout;
 
-		/*
-		 * ALPHA_KLUDGE_MCR needs to be killed.
-		 */
-		up->mcr_mask = ~ALPHA_KLUDGE_MCR;
-		up->mcr_force = ALPHA_KLUDGE_MCR;
+		up->mcr_mask = ~0;
+		up->mcr_force = 0;
 
 		uart_add_one_port(drv, &up->port);
 	}
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index 8a6cc8c30b5..b4902b99cfd 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -901,7 +901,6 @@ static int max3100_resume(struct spi_device *spi)
 static struct spi_driver max3100_driver = {
 	.driver = {
 		.name		= "max3100",
-		.bus		= &spi_bus_type,
 		.owner		= THIS_MODULE,
 	},
 
diff --git a/drivers/tty/serial/max3107-aava.c b/drivers/tty/serial/max3107-aava.c
index 90c40f22ec7..aae772a71de 100644
--- a/drivers/tty/serial/max3107-aava.c
+++ b/drivers/tty/serial/max3107-aava.c
@@ -315,7 +315,6 @@ static int __devinit max3107_probe_aava(struct spi_device *spi)
 static struct spi_driver max3107_driver = {
 	.driver = {
 		.name		= "aava-max3107",
-		.bus		= &spi_bus_type,
 		.owner		= THIS_MODULE,
 	},
 	.probe		= max3107_probe_aava,
diff --git a/drivers/tty/serial/max3107.c b/drivers/tty/serial/max3107.c
index 7827000db4f..17c7ba805d9 100644
--- a/drivers/tty/serial/max3107.c
+++ b/drivers/tty/serial/max3107.c
@@ -1181,7 +1181,6 @@ static int max3107_probe_generic(struct spi_device *spi)
 static struct spi_driver max3107_driver = {
 	.driver = {
 		.name		= "max3107",
-		.bus		= &spi_bus_type,
 		.owner		= THIS_MODULE,
 	},
 	.probe		= max3107_probe_generic,
diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c
index e272d3919c6..a9234ba8f8d 100644
--- a/drivers/tty/serial/mfd.c
+++ b/drivers/tty/serial/mfd.c
@@ -1154,7 +1154,6 @@ serial_hsu_console_setup(struct console *co, char *options)
 	int bits = 8;
 	int parity = 'n';
 	int flow = 'n';
-	int ret;
 
 	if (co->index == -1 || co->index >= serial_hsu_reg.nr)
 		co->index = 0;
@@ -1165,9 +1164,7 @@ serial_hsu_console_setup(struct console *co, char *options)
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
 
-	ret = uart_set_options(&up->port, co, baud, parity, bits, flow);
-
-	return ret;
+	return uart_set_options(&up->port, co, baud, parity, bits, flow);
 }
 
 static struct console serial_hsu_console = {
@@ -1176,9 +1173,13 @@ static struct console serial_hsu_console = {
 	.device		= uart_console_device,
 	.setup		= serial_hsu_console_setup,
 	.flags		= CON_PRINTBUFFER,
-	.index		= 2,
+	.index		= -1,
 	.data		= &serial_hsu_reg,
 };
+
+#define SERIAL_HSU_CONSOLE	(&serial_hsu_console)
+#else
+#define SERIAL_HSU_CONSOLE	NULL
 #endif
 
 struct uart_ops serial_hsu_pops = {
@@ -1208,6 +1209,7 @@ static struct uart_driver serial_hsu_reg = {
 	.major		= TTY_MAJOR,
 	.minor		= 128,
 	.nr		= 3,
+	.cons		= SERIAL_HSU_CONSOLE,
 };
 
 #ifdef CONFIG_PM
@@ -1342,12 +1344,6 @@ static int serial_hsu_probe(struct pci_dev *pdev,
 		}
 		uart_add_one_port(&serial_hsu_reg, &uport->port);
 
-#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE
-		if (index == 2) {
-			register_console(&serial_hsu_console);
-			uport->port.cons = &serial_hsu_console;
-		}
-#endif
 		pci_set_drvdata(pdev, uport);
 	}
 
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index 4c309e86990..df2a2240a3a 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -876,7 +876,6 @@ static int __devexit serial_m3110_remove(struct spi_device *dev)
 static struct spi_driver uart_max3110_driver = {
 	.driver = {
 			.name	= "spi_max3111",
-			.bus	= &spi_bus_type,
 			.owner	= THIS_MODULE,
 	},
 	.probe		= serial_m3110_probe,
diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c
index 60c6eb85026..5e85e1e14c4 100644
--- a/drivers/tty/serial/msm_serial_hs.c
+++ b/drivers/tty/serial/msm_serial_hs.c
@@ -422,9 +422,9 @@ static int __devexit msm_hs_remove(struct platform_device *pdev)
 		      msm_uport->rx.rbuffer);
 	dma_pool_destroy(msm_uport->rx.pool);
 
-	dma_unmap_single(dev, msm_uport->rx.cmdptr_dmaaddr, sizeof(u32 *),
+	dma_unmap_single(dev, msm_uport->rx.cmdptr_dmaaddr, sizeof(u32),
 			 DMA_TO_DEVICE);
-	dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr_ptr, sizeof(u32 *),
+	dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr_ptr, sizeof(u32),
 			 DMA_TO_DEVICE);
 	dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr, sizeof(dmov_box),
 			 DMA_TO_DEVICE);
@@ -812,7 +812,7 @@ static void msm_hs_submit_tx_locked(struct uart_port *uport)
 	*tx->command_ptr_ptr = CMD_PTR_LP | DMOV_CMD_ADDR(tx->mapped_cmd_ptr);
 
 	dma_sync_single_for_device(uport->dev, tx->mapped_cmd_ptr_ptr,
-				   sizeof(u32 *), DMA_TO_DEVICE);
+				   sizeof(u32), DMA_TO_DEVICE);
 
 	/* Save tx_count to use in Callback */
 	tx->tx_count = tx_count;
@@ -1087,12 +1087,10 @@ static void msm_hs_config_port(struct uart_port *uport, int cfg_flags)
 }
 
 /*  Handle CTS changes (Called from interrupt handler) */
-static void msm_hs_handle_delta_cts(struct uart_port *uport)
+static void msm_hs_handle_delta_cts_locked(struct uart_port *uport)
 {
-	unsigned long flags;
 	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
 
-	spin_lock_irqsave(&uport->lock, flags);
 	clk_enable(msm_uport->clk);
 
 	/* clear interrupt */
@@ -1100,7 +1098,6 @@ static void msm_hs_handle_delta_cts(struct uart_port *uport)
 	uport->icount.cts++;
 
 	clk_disable(msm_uport->clk);
-	spin_unlock_irqrestore(&uport->lock, flags);
 
 	/* clear the IOCTL TIOCMIWAIT if called */
 	wake_up_interruptible(&uport->state->port.delta_msr_wait);
@@ -1248,7 +1245,7 @@ static irqreturn_t msm_hs_isr(int irq, void *dev)
 
 	/* Change in CTS interrupt */
 	if (isr_status & UARTDM_ISR_DELTA_CTS_BMSK)
-		msm_hs_handle_delta_cts(uport);
+		msm_hs_handle_delta_cts_locked(uport);
 
 	spin_unlock_irqrestore(&uport->lock, flags);
 
@@ -1537,7 +1534,7 @@ static int __devinit uartdm_init_port(struct uart_port *uport)
 	if (!tx->command_ptr)
 		return -ENOMEM;
 
-	tx->command_ptr_ptr = kmalloc(sizeof(u32 *), GFP_KERNEL | __GFP_DMA);
+	tx->command_ptr_ptr = kmalloc(sizeof(u32), GFP_KERNEL | __GFP_DMA);
 	if (!tx->command_ptr_ptr) {
 		ret = -ENOMEM;
 		goto err_tx_command_ptr_ptr;
@@ -1547,7 +1544,7 @@ static int __devinit uartdm_init_port(struct uart_port *uport)
 					    sizeof(dmov_box), DMA_TO_DEVICE);
 	tx->mapped_cmd_ptr_ptr = dma_map_single(uport->dev,
 						tx->command_ptr_ptr,
-						sizeof(u32 *), DMA_TO_DEVICE);
+						sizeof(u32), DMA_TO_DEVICE);
 	tx->xfer.cmdptr = DMOV_CMD_ADDR(tx->mapped_cmd_ptr_ptr);
 
 	init_waitqueue_head(&rx->wait);
@@ -1575,7 +1572,7 @@ static int __devinit uartdm_init_port(struct uart_port *uport)
 		goto err_rx_command_ptr;
 	}
 
-	rx->command_ptr_ptr = kmalloc(sizeof(u32 *), GFP_KERNEL | __GFP_DMA);
+	rx->command_ptr_ptr = kmalloc(sizeof(u32), GFP_KERNEL | __GFP_DMA);
 	if (!rx->command_ptr_ptr) {
 		pr_err("%s(): cannot allocate rx->command_ptr_ptr", __func__);
 		ret = -ENOMEM;
@@ -1593,7 +1590,7 @@ static int __devinit uartdm_init_port(struct uart_port *uport)
 	*rx->command_ptr_ptr = CMD_PTR_LP | DMOV_CMD_ADDR(rx->mapped_cmd_ptr);
 
 	rx->cmdptr_dmaaddr = dma_map_single(uport->dev, rx->command_ptr_ptr,
-					    sizeof(u32 *), DMA_TO_DEVICE);
+					    sizeof(u32), DMA_TO_DEVICE);
 	rx->xfer.cmdptr = DMOV_CMD_ADDR(rx->cmdptr_dmaaddr);
 
 	INIT_WORK(&rx->tty_work, msm_hs_tty_flip_buffer_work);
@@ -1609,7 +1606,7 @@ err_dma_pool_alloc:
 	dma_pool_destroy(msm_uport->rx.pool);
 err_dma_pool_create:
 	dma_unmap_single(uport->dev, msm_uport->tx.mapped_cmd_ptr_ptr,
-				sizeof(u32 *), DMA_TO_DEVICE);
+				sizeof(u32), DMA_TO_DEVICE);
 	dma_unmap_single(uport->dev, msm_uport->tx.mapped_cmd_ptr,
 				sizeof(dmov_box), DMA_TO_DEVICE);
 	kfree(msm_uport->tx.command_ptr_ptr);
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 7e02c9c344f..076169f50b0 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -145,11 +145,12 @@ static inline void mxs_auart_tx_chars(struct mxs_auart_port *s)
 			writel(xmit->buf[xmit->tail],
 				     s->port.membase + AUART_DATA);
 			xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-			if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-				uart_write_wakeup(&s->port);
 		} else
 			break;
 	}
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(&s->port);
+
 	if (uart_circ_empty(&(s->port.state->xmit)))
 		writel(AUART_INTR_TXIEN,
 			     s->port.membase + AUART_INTR_CLR);
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 5e713d3ef1f..f2a1380ed67 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -399,7 +399,7 @@ static unsigned int serial_omap_tx_empty(struct uart_port *port)
 static unsigned int serial_omap_get_mctrl(struct uart_port *port)
 {
 	struct uart_omap_port *up = (struct uart_omap_port *)port;
-	unsigned char status;
+	unsigned int status;
 	unsigned int ret = 0;
 
 	status = check_modem_status(up);
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index d6aba8c087e..de0f613ed6f 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -25,6 +25,9 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/dmi.h>
+#include <linux/console.h>
+#include <linux/nmi.h>
+#include <linux/delay.h>
 
 #include <linux/dmaengine.h>
 #include <linux/pch_dma.h>
@@ -198,6 +201,10 @@ enum {
 
 #define PCI_VENDOR_ID_ROHM		0x10DB
 
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+#define DEFAULT_BAUD_RATE 1843200 /* 1.8432MHz */
+
 struct pch_uart_buffer {
 	unsigned char *buf;
 	int size;
@@ -276,6 +283,9 @@ static struct pch_uart_driver_data drv_dat[] = {
 	[pch_ml7831_uart1] = {PCH_UART_2LINE, 1},
 };
 
+#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
+static struct eg20t_port *pch_uart_ports[PCH_UART_NR];
+#endif
 static unsigned int default_baud = 9600;
 static const int trigger_level_256[4] = { 1, 64, 128, 224 };
 static const int trigger_level_64[4] = { 1, 16, 32, 56 };
@@ -1385,6 +1395,143 @@ static struct uart_ops pch_uart_ops = {
 	.verify_port = pch_uart_verify_port
 };
 
+#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
+
+/*
+ *	Wait for transmitter & holding register to empty
+ */
+static void wait_for_xmitr(struct eg20t_port *up, int bits)
+{
+	unsigned int status, tmout = 10000;
+
+	/* Wait up to 10ms for the character(s) to be sent. */
+	for (;;) {
+		status = ioread8(up->membase + UART_LSR);
+
+		if ((status & bits) == bits)
+			break;
+		if (--tmout == 0)
+			break;
+		udelay(1);
+	}
+
+	/* Wait up to 1s for flow control if necessary */
+	if (up->port.flags & UPF_CONS_FLOW) {
+		unsigned int tmout;
+		for (tmout = 1000000; tmout; tmout--) {
+			unsigned int msr = ioread8(up->membase + UART_MSR);
+			if (msr & UART_MSR_CTS)
+				break;
+			udelay(1);
+			touch_nmi_watchdog();
+		}
+	}
+}
+
+static void pch_console_putchar(struct uart_port *port, int ch)
+{
+	struct eg20t_port *priv =
+		container_of(port, struct eg20t_port, port);
+
+	wait_for_xmitr(priv, UART_LSR_THRE);
+	iowrite8(ch, priv->membase + PCH_UART_THR);
+}
+
+/*
+ *	Print a string to the serial port trying not to disturb
+ *	any possible real use of the port...
+ *
+ *	The console_lock must be held when we get here.
+ */
+static void
+pch_console_write(struct console *co, const char *s, unsigned int count)
+{
+	struct eg20t_port *priv;
+
+	unsigned long flags;
+	u8 ier;
+	int locked = 1;
+
+	priv = pch_uart_ports[co->index];
+
+	touch_nmi_watchdog();
+
+	local_irq_save(flags);
+	if (priv->port.sysrq) {
+		/* serial8250_handle_port() already took the lock */
+		locked = 0;
+	} else if (oops_in_progress) {
+		locked = spin_trylock(&priv->port.lock);
+	} else
+		spin_lock(&priv->port.lock);
+
+	/*
+	 *	First save the IER then disable the interrupts
+	 */
+	ier = ioread8(priv->membase + UART_IER);
+
+	pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
+
+	uart_console_write(&priv->port, s, count, pch_console_putchar);
+
+	/*
+	 *	Finally, wait for transmitter to become empty
+	 *	and restore the IER
+	 */
+	wait_for_xmitr(priv, BOTH_EMPTY);
+	iowrite8(ier, priv->membase + UART_IER);
+
+	if (locked)
+		spin_unlock(&priv->port.lock);
+	local_irq_restore(flags);
+}
+
+static int __init pch_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud = 9600;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	/*
+	 * Check whether an invalid uart number has been specified, and
+	 * if so, search for the first available port that does have
+	 * console support.
+	 */
+	if (co->index >= PCH_UART_NR)
+		co->index = 0;
+	port = &pch_uart_ports[co->index]->port;
+
+	if (!port || (!port->iobase && !port->membase))
+		return -ENODEV;
+
+	/* setup uartclock */
+	port->uartclk = DEFAULT_BAUD_RATE;
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver pch_uart_driver;
+
+static struct console pch_console = {
+	.name		= PCH_UART_DRIVER_DEVICE,
+	.write		= pch_console_write,
+	.device		= uart_console_device,
+	.setup		= pch_console_setup,
+	.flags		= CON_PRINTBUFFER | CON_ANYTIME,
+	.index		= -1,
+	.data		= &pch_uart_driver,
+};
+
+#define PCH_CONSOLE	(&pch_console)
+#else
+#define PCH_CONSOLE	NULL
+#endif
+
 static struct uart_driver pch_uart_driver = {
 	.owner = THIS_MODULE,
 	.driver_name = KBUILD_MODNAME,
@@ -1392,6 +1539,7 @@ static struct uart_driver pch_uart_driver = {
 	.major = 0,
 	.minor = 0,
 	.nr = PCH_UART_NR,
+	.cons = PCH_CONSOLE,
 };
 
 static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
@@ -1418,7 +1566,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 	if (!rxbuf)
 		goto init_port_free_txbuf;
 
-	base_baud = 1843200; /* 1.8432MHz */
+	base_baud = DEFAULT_BAUD_RATE;
 
 	/* quirk for CM-iTC board */
 	board_name = dmi_get_system_info(DMI_BOARD_NAME);
@@ -1468,6 +1616,9 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 	pci_set_drvdata(pdev, priv);
 	pch_uart_hal_request(pdev, fifosize, base_baud);
 
+#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
+	pch_uart_ports[board->line_no] = priv;
+#endif
 	ret = uart_add_one_port(&pch_uart_driver, &priv->port);
 	if (ret < 0)
 		goto init_port_hal_free;
@@ -1475,6 +1626,9 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 	return priv;
 
 init_port_hal_free:
+#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
+	pch_uart_ports[board->line_no] = NULL;
+#endif
 	free_page((unsigned long)rxbuf);
 init_port_free_txbuf:
 	kfree(priv);
@@ -1497,6 +1651,10 @@ static void pch_uart_pci_remove(struct pci_dev *pdev)
 	priv = (struct eg20t_port *)pci_get_drvdata(pdev);
 
 	pci_disable_msi(pdev);
+
+#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
+	pch_uart_ports[priv->port.line] = NULL;
+#endif
 	pch_uart_exit_port(priv);
 	pci_disable_device(pdev);
 	kfree(priv);
diff --git a/drivers/tty/serial/sc26xx.c b/drivers/tty/serial/sc26xx.c
index 75038ad2b24..e0b4b0a30a5 100644
--- a/drivers/tty/serial/sc26xx.c
+++ b/drivers/tty/serial/sc26xx.c
@@ -736,19 +736,7 @@ static struct platform_driver sc26xx_driver = {
 	},
 };
 
-static int __init sc26xx_init(void)
-{
-	return platform_driver_register(&sc26xx_driver);
-}
-
-static void __exit sc26xx_exit(void)
-{
-	platform_driver_unregister(&sc26xx_driver);
-}
-
-module_init(sc26xx_init);
-module_exit(sc26xx_exit);
-
+module_platform_driver(sc26xx_driver);
 
 MODULE_AUTHOR("Thomas Bogendörfer");
 MODULE_DESCRIPTION("SC681/SC2692 serial driver");
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 0406d7ff505..c7bf31a6a7e 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -22,6 +22,7 @@
  */
 #include <linux/module.h>
 #include <linux/tty.h>
+#include <linux/tty_flip.h>
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/console.h>
@@ -60,6 +61,8 @@ static void uart_change_speed(struct tty_struct *tty, struct uart_state *state,
 static void uart_wait_until_sent(struct tty_struct *tty, int timeout);
 static void uart_change_pm(struct uart_state *state, int pm_state);
 
+static void uart_port_shutdown(struct tty_port *port);
+
 /*
  * This routine is used by the interrupt handler to schedule processing in
  * the software interrupt portion of the driver.
@@ -128,25 +131,16 @@ uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear)
  * Startup the port.  This will be called once per open.  All calls
  * will be serialised by the per-port mutex.
  */
-static int uart_startup(struct tty_struct *tty, struct uart_state *state, int init_hw)
+static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
+		int init_hw)
 {
 	struct uart_port *uport = state->uart_port;
 	struct tty_port *port = &state->port;
 	unsigned long page;
 	int retval = 0;
 
-	if (port->flags & ASYNC_INITIALIZED)
-		return 0;
-
-	/*
-	 * Set the TTY IO error marker - we will only clear this
-	 * once we have successfully opened the port.  Also set
-	 * up the tty->alt_speed kludge
-	 */
-	set_bit(TTY_IO_ERROR, &tty->flags);
-
 	if (uport->type == PORT_UNKNOWN)
-		return 0;
+		return 1;
 
 	/*
 	 * Initialise and allocate the transmit and temporary
@@ -188,10 +182,6 @@ static int uart_startup(struct tty_struct *tty, struct uart_state *state, int in
 				tty->hw_stopped = 1;
 			spin_unlock_irq(&uport->lock);
 		}
-
-		set_bit(ASYNCB_INITIALIZED, &port->flags);
-
-		clear_bit(TTY_IO_ERROR, &tty->flags);
 	}
 
 	/*
@@ -200,6 +190,31 @@ static int uart_startup(struct tty_struct *tty, struct uart_state *state, int in
 	 * now.
 	 */
 	if (retval && capable(CAP_SYS_ADMIN))
+		return 1;
+
+	return retval;
+}
+
+static int uart_startup(struct tty_struct *tty, struct uart_state *state,
+		int init_hw)
+{
+	struct tty_port *port = &state->port;
+	int retval;
+
+	if (port->flags & ASYNC_INITIALIZED)
+		return 0;
+
+	/*
+	 * Set the TTY IO error marker - we will only clear this
+	 * once we have successfully opened the port.
+	 */
+	set_bit(TTY_IO_ERROR, &tty->flags);
+
+	retval = uart_port_startup(tty, state, init_hw);
+	if (!retval) {
+		set_bit(ASYNCB_INITIALIZED, &port->flags);
+		clear_bit(TTY_IO_ERROR, &tty->flags);
+	} else if (retval > 0)
 		retval = 0;
 
 	return retval;
@@ -228,24 +243,7 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
 		if (!tty || (tty->termios->c_cflag & HUPCL))
 			uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
 
-		/*
-		 * clear delta_msr_wait queue to avoid mem leaks: we may free
-		 * the irq here so the queue might never be woken up.  Note
-		 * that we won't end up waiting on delta_msr_wait again since
-		 * any outstanding file descriptors should be pointing at
-		 * hung_up_tty_fops now.
-		 */
-		wake_up_interruptible(&port->delta_msr_wait);
-
-		/*
-		 * Free the IRQ and disable the port.
-		 */
-		uport->ops->shutdown(uport);
-
-		/*
-		 * Ensure that the IRQ handler isn't running on another CPU.
-		 */
-		synchronize_irq(uport->irq);
+		uart_port_shutdown(port);
 	}
 
 	/*
@@ -423,7 +421,7 @@ uart_get_divisor(struct uart_port *port, unsigned int baud)
 	if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
 		quot = port->custom_divisor;
 	else
-		quot = (port->uartclk + (8 * baud)) / (16 * baud);
+		quot = DIV_ROUND_CLOSEST(port->uartclk, 16 * baud);
 
 	return quot;
 }
@@ -658,10 +656,10 @@ static int uart_get_info(struct uart_state *state,
 	tmp.flags	    = uport->flags;
 	tmp.xmit_fifo_size  = uport->fifosize;
 	tmp.baud_base	    = uport->uartclk / 16;
-	tmp.close_delay	    = port->close_delay / 10;
+	tmp.close_delay	    = jiffies_to_msecs(port->close_delay) / 10;
 	tmp.closing_wait    = port->closing_wait == ASYNC_CLOSING_WAIT_NONE ?
 				ASYNC_CLOSING_WAIT_NONE :
-				port->closing_wait / 10;
+				jiffies_to_msecs(port->closing_wait) / 10;
 	tmp.custom_divisor  = uport->custom_divisor;
 	tmp.hub6	    = uport->hub6;
 	tmp.io_type         = uport->iotype;
@@ -695,9 +693,10 @@ static int uart_set_info(struct tty_struct *tty, struct uart_state *state,
 		new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET;
 
 	new_serial.irq = irq_canonicalize(new_serial.irq);
-	close_delay = new_serial.close_delay * 10;
+	close_delay = msecs_to_jiffies(new_serial.close_delay * 10);
 	closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
-			ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
+			ASYNC_CLOSING_WAIT_NONE :
+			msecs_to_jiffies(new_serial.closing_wait * 10);
 
 	/*
 	 * This semaphore protects port->count.  It is also
@@ -1265,47 +1264,8 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 
 	pr_debug("uart_close(%d) called\n", uport->line);
 
-	spin_lock_irqsave(&port->lock, flags);
-
-	if (tty_hung_up_p(filp)) {
-		spin_unlock_irqrestore(&port->lock, flags);
+	if (tty_port_close_start(port, tty, filp) == 0)
 		return;
-	}
-
-	if ((tty->count == 1) && (port->count != 1)) {
-		/*
-		 * Uh, oh.  tty->count is 1, which means that the tty
-		 * structure will be freed.  port->count should always
-		 * be one in these conditions.  If it's greater than
-		 * one, we've got real problems, since it means the
-		 * serial port won't be shutdown.
-		 */
-		printk(KERN_ERR "uart_close: bad serial port count; tty->count is 1, "
-		       "port->count is %d\n", port->count);
-		port->count = 1;
-	}
-	if (--port->count < 0) {
-		printk(KERN_ERR "uart_close: bad serial port count for %s: %d\n",
-		       tty->name, port->count);
-		port->count = 0;
-	}
-	if (port->count) {
-		spin_unlock_irqrestore(&port->lock, flags);
-		return;
-	}
-
-	/*
-	 * Now we wait for the transmit buffer to clear; and we notify
-	 * the line discipline to only process XON/XOFF characters by
-	 * setting tty->closing.
-	 */
-	set_bit(ASYNCB_CLOSING, &port->flags);
-	tty->closing = 1;
-	spin_unlock_irqrestore(&port->lock, flags);
-
-	if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
-		tty_wait_until_sent_from_close(tty,
-				msecs_to_jiffies(port->closing_wait));
 
 	/*
 	 * At this point, we stop accepting input.  To do this, we
@@ -1337,7 +1297,8 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 	if (port->blocked_open) {
 		spin_unlock_irqrestore(&port->lock, flags);
 		if (port->close_delay)
-			msleep_interruptible(port->close_delay);
+			msleep_interruptible(
+					jiffies_to_msecs(port->close_delay));
 		spin_lock_irqsave(&port->lock, flags);
 	} else if (!uart_console(uport)) {
 		spin_unlock_irqrestore(&port->lock, flags);
@@ -1441,6 +1402,36 @@ static void uart_hangup(struct tty_struct *tty)
 	mutex_unlock(&port->mutex);
 }
 
+static int uart_port_activate(struct tty_port *port, struct tty_struct *tty)
+{
+	return 0;
+}
+
+static void uart_port_shutdown(struct tty_port *port)
+{
+	struct uart_state *state = container_of(port, struct uart_state, port);
+	struct uart_port *uport = state->uart_port;
+
+	/*
+	 * clear delta_msr_wait queue to avoid mem leaks: we may free
+	 * the irq here so the queue might never be woken up.  Note
+	 * that we won't end up waiting on delta_msr_wait again since
+	 * any outstanding file descriptors should be pointing at
+	 * hung_up_tty_fops now.
+	 */
+	wake_up_interruptible(&port->delta_msr_wait);
+
+	/*
+	 * Free the IRQ and disable the port.
+	 */
+	uport->ops->shutdown(uport);
+
+	/*
+	 * Ensure that the IRQ handler isn't running on another CPU.
+	 */
+	synchronize_irq(uport->irq);
+}
+
 static int uart_carrier_raised(struct tty_port *port)
 {
 	struct uart_state *state = container_of(port, struct uart_state, port);
@@ -1466,33 +1457,6 @@ static void uart_dtr_rts(struct tty_port *port, int onoff)
 		uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
 }
 
-static struct uart_state *uart_get(struct uart_driver *drv, int line)
-{
-	struct uart_state *state;
-	struct tty_port *port;
-	int ret = 0;
-
-	state = drv->state + line;
-	port = &state->port;
-	if (mutex_lock_interruptible(&port->mutex)) {
-		ret = -ERESTARTSYS;
-		goto err;
-	}
-
-	port->count++;
-	if (!state->uart_port || state->uart_port->flags & UPF_DEAD) {
-		ret = -ENXIO;
-		goto err_unlock;
-	}
-	return state;
-
- err_unlock:
-	port->count--;
-	mutex_unlock(&port->mutex);
- err:
-	return ERR_PTR(ret);
-}
-
 /*
  * calls to uart_open are serialised by the BKL in
  *   fs/char_dev.c:chrdev_open()
@@ -1506,26 +1470,29 @@ static struct uart_state *uart_get(struct uart_driver *drv, int line)
 static int uart_open(struct tty_struct *tty, struct file *filp)
 {
 	struct uart_driver *drv = (struct uart_driver *)tty->driver->driver_state;
-	struct uart_state *state;
-	struct tty_port *port;
 	int retval, line = tty->index;
+	struct uart_state *state = drv->state + line;
+	struct tty_port *port = &state->port;
 
 	pr_debug("uart_open(%d) called\n", line);
 
 	/*
-	 * We take the semaphore inside uart_get to guarantee that we won't
-	 * be re-entered while allocating the state structure, or while we
-	 * request any IRQs that the driver may need.  This also has the nice
-	 * side-effect that it delays the action of uart_hangup, so we can
-	 * guarantee that state->port.tty will always contain something
-	 * reasonable.
+	 * We take the semaphore here to guarantee that we won't be re-entered
+	 * while allocating the state structure, or while we request any IRQs
+	 * that the driver may need.  This also has the nice side-effect that
+	 * it delays the action of uart_hangup, so we can guarantee that
+	 * state->port.tty will always contain something reasonable.
 	 */
-	state = uart_get(drv, line);
-	if (IS_ERR(state)) {
-		retval = PTR_ERR(state);
-		goto fail;
+	if (mutex_lock_interruptible(&port->mutex)) {
+		retval = -ERESTARTSYS;
+		goto end;
+	}
+
+	port->count++;
+	if (!state->uart_port || state->uart_port->flags & UPF_DEAD) {
+		retval = -ENXIO;
+		goto err_dec_count;
 	}
-	port = &state->port;
 
 	/*
 	 * Once we set tty->driver_data here, we are guaranteed that
@@ -1535,7 +1502,6 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
 	tty->driver_data = state;
 	state->uart_port->state = state;
 	tty->low_latency = (state->uart_port->flags & UPF_LOW_LATENCY) ? 1 : 0;
-	tty->alt_speed = 0;
 	tty_port_tty_set(port, tty);
 
 	/*
@@ -1543,9 +1509,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
 	 */
 	if (tty_hung_up_p(filp)) {
 		retval = -EAGAIN;
-		port->count--;
-		mutex_unlock(&port->mutex);
-		goto fail;
+		goto err_dec_count;
 	}
 
 	/*
@@ -1566,8 +1530,12 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
 	if (retval == 0)
 		retval = tty_port_block_til_ready(port, tty, filp);
 
-fail:
+end:
 	return retval;
+err_dec_count:
+	port->count--;
+	mutex_unlock(&port->mutex);
+	goto end;
 }
 
 static const char *uart_type(struct uart_port *port)
@@ -1858,6 +1826,14 @@ uart_set_options(struct uart_port *port, struct console *co,
 EXPORT_SYMBOL_GPL(uart_set_options);
 #endif /* CONFIG_SERIAL_CORE_CONSOLE */
 
+/**
+ * uart_change_pm - set power state of the port
+ *
+ * @state: port descriptor
+ * @pm_state: new state
+ *
+ * Locking: port->mutex has to be held
+ */
 static void uart_change_pm(struct uart_state *state, int pm_state)
 {
 	struct uart_port *port = state->uart_port;
@@ -2214,6 +2190,8 @@ static const struct tty_operations uart_ops = {
 };
 
 static const struct tty_port_operations uart_port_ops = {
+	.activate	= uart_port_activate,
+	.shutdown	= uart_port_shutdown,
 	.carrier_raised = uart_carrier_raised,
 	.dtr_rts	= uart_dtr_rts,
 };
@@ -2275,8 +2253,8 @@ int uart_register_driver(struct uart_driver *drv)
 
 		tty_port_init(port);
 		port->ops = &uart_port_ops;
-		port->close_delay     = 500;	/* .5 seconds */
-		port->closing_wait    = 30000;	/* 30 seconds */
+		port->close_delay     = HZ / 2;	/* .5 seconds */
+		port->closing_wait    = 30 * HZ;/* 30 seconds */
 	}
 
 	retval = tty_register_driver(normal);
@@ -2467,6 +2445,99 @@ int uart_match_port(struct uart_port *port1, struct uart_port *port2)
 }
 EXPORT_SYMBOL(uart_match_port);
 
+/**
+ *	uart_handle_dcd_change - handle a change of carrier detect state
+ *	@uport: uart_port structure for the open port
+ *	@status: new carrier detect status, nonzero if active
+ */
+void uart_handle_dcd_change(struct uart_port *uport, unsigned int status)
+{
+	struct uart_state *state = uport->state;
+	struct tty_port *port = &state->port;
+	struct tty_ldisc *ld = tty_ldisc_ref(port->tty);
+	struct pps_event_time ts;
+
+	if (ld && ld->ops->dcd_change)
+		pps_get_ts(&ts);
+
+	uport->icount.dcd++;
+#ifdef CONFIG_HARD_PPS
+	if ((uport->flags & UPF_HARDPPS_CD) && status)
+		hardpps();
+#endif
+
+	if (port->flags & ASYNC_CHECK_CD) {
+		if (status)
+			wake_up_interruptible(&port->open_wait);
+		else if (port->tty)
+			tty_hangup(port->tty);
+	}
+
+	if (ld && ld->ops->dcd_change)
+		ld->ops->dcd_change(port->tty, status, &ts);
+	if (ld)
+		tty_ldisc_deref(ld);
+}
+EXPORT_SYMBOL_GPL(uart_handle_dcd_change);
+
+/**
+ *	uart_handle_cts_change - handle a change of clear-to-send state
+ *	@uport: uart_port structure for the open port
+ *	@status: new clear to send status, nonzero if active
+ */
+void uart_handle_cts_change(struct uart_port *uport, unsigned int status)
+{
+	struct tty_port *port = &uport->state->port;
+	struct tty_struct *tty = port->tty;
+
+	uport->icount.cts++;
+
+	if (port->flags & ASYNC_CTS_FLOW) {
+		if (tty->hw_stopped) {
+			if (status) {
+				tty->hw_stopped = 0;
+				uport->ops->start_tx(uport);
+				uart_write_wakeup(uport);
+			}
+		} else {
+			if (!status) {
+				tty->hw_stopped = 1;
+				uport->ops->stop_tx(uport);
+			}
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(uart_handle_cts_change);
+
+/**
+ * uart_insert_char - push a char to the uart layer
+ *
+ * User is responsible to call tty_flip_buffer_push when they are done with
+ * insertion.
+ *
+ * @port: corresponding port
+ * @status: state of the serial port RX buffer (LSR for 8250)
+ * @overrun: mask of overrun bits in @status
+ * @ch: character to push
+ * @flag: flag for the character (see TTY_NORMAL and friends)
+ */
+void uart_insert_char(struct uart_port *port, unsigned int status,
+		 unsigned int overrun, unsigned int ch, unsigned int flag)
+{
+	struct tty_struct *tty = port->state->port.tty;
+
+	if ((status & port->ignore_status_mask & ~overrun) == 0)
+		tty_insert_flip_char(tty, ch, flag);
+
+	/*
+	 * Overrun is special.  Since it's reported immediately,
+	 * it doesn't affect the current character.
+	 */
+	if (status & ~port->ignore_status_mask & overrun)
+		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+}
+EXPORT_SYMBOL_GPL(uart_insert_char);
+
 EXPORT_SYMBOL(uart_write_wakeup);
 EXPORT_SYMBOL(uart_register_driver);
 EXPORT_SYMBOL(uart_unregister_driver);
diff --git a/drivers/tty/serial/serial_cs.c b/drivers/tty/serial/serial_cs.c
index eef736ff810..86090605a84 100644
--- a/drivers/tty/serial/serial_cs.c
+++ b/drivers/tty/serial/serial_cs.c
@@ -317,7 +317,7 @@ static int serial_probe(struct pcmcia_device *link)
 	info->p_dev = link;
 	link->priv = info;
 
-	link->config_flags |= CONF_ENABLE_IRQ;
+	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
 	if (do_sound)
 		link->config_flags |= CONF_ENABLE_SPKR;
 
@@ -445,7 +445,7 @@ static int simple_config(struct pcmcia_device *link)
 
 	/* First pass: look for a config entry that looks normal.
 	 * Two tries: without IO aliases, then with aliases */
-	link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_SET_IO;
+	link->config_flags |= CONF_AUTO_SET_VPP;
 	for (try = 0; try < 4; try++)
 		if (!pcmcia_loop_config(link, simple_config_check, &try))
 			goto found_port;
@@ -501,7 +501,8 @@ static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
 {
 	int *base2 = priv_data;
 
-	if (!p_dev->resource[0]->end || !p_dev->resource[1]->end)
+	if (!p_dev->resource[0]->end || !p_dev->resource[1]->end ||
+		p_dev->resource[0]->start + 8 != p_dev->resource[1]->start)
 		return -ENODEV;
 
 	p_dev->resource[0]->end = p_dev->resource[1]->end = 8;
@@ -520,7 +521,6 @@ static int multi_config(struct pcmcia_device *link)
 	struct serial_info *info = link->priv;
 	int i, base2 = 0;
 
-	link->config_flags |= CONF_AUTO_SET_IO;
 	/* First, look for a generic full-sized window */
 	if (!pcmcia_loop_config(link, multi_config_check, &info->multi))
 		base2 = link->resource[0]->start + 8;
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
new file mode 100644
index 00000000000..a60523fee11
--- /dev/null
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -0,0 +1,783 @@
+/*
+ * Driver for CSR SiRFprimaII onboard UARTs.
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/sysrq.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+#include <linux/pinctrl/pinmux.h>
+
+#include "sirfsoc_uart.h"
+
+static unsigned int
+sirfsoc_uart_pio_tx_chars(struct sirfsoc_uart_port *sirfport, int count);
+static unsigned int
+sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count);
+static struct uart_driver sirfsoc_uart_drv;
+
+static const struct sirfsoc_baudrate_to_regv baudrate_to_regv[] = {
+	{4000000, 2359296},
+	{3500000, 1310721},
+	{3000000, 1572865},
+	{2500000, 1245186},
+	{2000000, 1572866},
+	{1500000, 1245188},
+	{1152000, 1638404},
+	{1000000, 1572869},
+	{921600, 1114120},
+	{576000, 1245196},
+	{500000, 1245198},
+	{460800, 1572876},
+	{230400, 1310750},
+	{115200, 1310781},
+	{57600, 1310843},
+	{38400, 1114328},
+	{19200, 1114545},
+	{9600, 1114979},
+};
+
+static struct sirfsoc_uart_port sirfsoc_uart_ports[SIRFSOC_UART_NR] = {
+	[0] = {
+		.port = {
+			.iotype		= UPIO_MEM,
+			.flags		= UPF_BOOT_AUTOCONF,
+			.line		= 0,
+		},
+	},
+	[1] = {
+		.port = {
+			.iotype		= UPIO_MEM,
+			.flags		= UPF_BOOT_AUTOCONF,
+			.line		= 1,
+		},
+	},
+	[2] = {
+		.port = {
+			.iotype		= UPIO_MEM,
+			.flags		= UPF_BOOT_AUTOCONF,
+			.line		= 2,
+		},
+	},
+};
+
+static inline struct sirfsoc_uart_port *to_sirfport(struct uart_port *port)
+{
+	return container_of(port, struct sirfsoc_uart_port, port);
+}
+
+static inline unsigned int sirfsoc_uart_tx_empty(struct uart_port *port)
+{
+	unsigned long reg;
+	reg = rd_regl(port, SIRFUART_TX_FIFO_STATUS);
+	if (reg & SIRFUART_FIFOEMPTY_MASK(port))
+		return TIOCSER_TEMT;
+	else
+		return 0;
+}
+
+static unsigned int sirfsoc_uart_get_mctrl(struct uart_port *port)
+{
+	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
+	if (!(sirfport->ms_enabled)) {
+		goto cts_asserted;
+	} else if (sirfport->hw_flow_ctrl) {
+		if (!(rd_regl(port, SIRFUART_AFC_CTRL) &
+						SIRFUART_CTS_IN_STATUS))
+			goto cts_asserted;
+		else
+			goto cts_deasserted;
+	}
+cts_deasserted:
+	return TIOCM_CAR | TIOCM_DSR;
+cts_asserted:
+	return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+}
+
+static void sirfsoc_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
+	unsigned int assert = mctrl & TIOCM_RTS;
+	unsigned int val = assert ? SIRFUART_AFC_CTRL_RX_THD : 0x0;
+	unsigned int current_val;
+	if (sirfport->hw_flow_ctrl) {
+		current_val = rd_regl(port, SIRFUART_AFC_CTRL) & ~0xFF;
+		val |= current_val;
+		wr_regl(port, SIRFUART_AFC_CTRL, val);
+	}
+}
+
+static void sirfsoc_uart_stop_tx(struct uart_port *port)
+{
+	unsigned int regv;
+	regv = rd_regl(port, SIRFUART_INT_EN);
+	wr_regl(port, SIRFUART_INT_EN, regv & ~SIRFUART_TX_INT_EN);
+}
+
+void sirfsoc_uart_start_tx(struct uart_port *port)
+{
+	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
+	unsigned long regv;
+	sirfsoc_uart_pio_tx_chars(sirfport, 1);
+	wr_regl(port, SIRFUART_TX_FIFO_OP, SIRFUART_TX_FIFO_START);
+	regv = rd_regl(port, SIRFUART_INT_EN);
+	wr_regl(port, SIRFUART_INT_EN, regv | SIRFUART_TX_INT_EN);
+}
+
+static void sirfsoc_uart_stop_rx(struct uart_port *port)
+{
+	unsigned long regv;
+	wr_regl(port, SIRFUART_RX_FIFO_OP, 0);
+	regv = rd_regl(port, SIRFUART_INT_EN);
+	wr_regl(port, SIRFUART_INT_EN, regv & ~SIRFUART_RX_IO_INT_EN);
+}
+
+static void sirfsoc_uart_disable_ms(struct uart_port *port)
+{
+	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
+	unsigned long reg;
+	sirfport->ms_enabled = 0;
+	if (!sirfport->hw_flow_ctrl)
+		return;
+	reg = rd_regl(port, SIRFUART_AFC_CTRL);
+	wr_regl(port, SIRFUART_AFC_CTRL, reg & ~0x3FF);
+	reg = rd_regl(port, SIRFUART_INT_EN);
+	wr_regl(port, SIRFUART_INT_EN, reg & ~SIRFUART_CTS_INT_EN);
+}
+
+static void sirfsoc_uart_enable_ms(struct uart_port *port)
+{
+	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
+	unsigned long reg;
+	unsigned long flg;
+	if (!sirfport->hw_flow_ctrl)
+		return;
+	flg = SIRFUART_AFC_RX_EN | SIRFUART_AFC_TX_EN;
+	reg = rd_regl(port, SIRFUART_AFC_CTRL);
+	wr_regl(port, SIRFUART_AFC_CTRL, reg | flg);
+	reg = rd_regl(port, SIRFUART_INT_EN);
+	wr_regl(port, SIRFUART_INT_EN, reg | SIRFUART_CTS_INT_EN);
+	uart_handle_cts_change(port,
+		!(rd_regl(port, SIRFUART_AFC_CTRL) & SIRFUART_CTS_IN_STATUS));
+	sirfport->ms_enabled = 1;
+}
+
+static void sirfsoc_uart_break_ctl(struct uart_port *port, int break_state)
+{
+	unsigned long ulcon = rd_regl(port, SIRFUART_LINE_CTRL);
+	if (break_state)
+		ulcon |= SIRFUART_SET_BREAK;
+	else
+		ulcon &= ~SIRFUART_SET_BREAK;
+	wr_regl(port, SIRFUART_LINE_CTRL, ulcon);
+}
+
+static unsigned int
+sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count)
+{
+	unsigned int ch, rx_count = 0;
+	struct tty_struct *tty;
+
+	tty = tty_port_tty_get(&port->state->port);
+	if (!tty)
+		return -ENODEV;
+
+	while (!(rd_regl(port, SIRFUART_RX_FIFO_STATUS) &
+					SIRFUART_FIFOEMPTY_MASK(port))) {
+		ch = rd_regl(port, SIRFUART_RX_FIFO_DATA) | SIRFUART_DUMMY_READ;
+		if (unlikely(uart_handle_sysrq_char(port, ch)))
+			continue;
+		uart_insert_char(port, 0, 0, ch, TTY_NORMAL);
+		rx_count++;
+		if (rx_count >= max_rx_count)
+			break;
+	}
+
+	port->icount.rx += rx_count;
+	tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
+
+	return rx_count;
+}
+
+static unsigned int
+sirfsoc_uart_pio_tx_chars(struct sirfsoc_uart_port *sirfport, int count)
+{
+	struct uart_port *port = &sirfport->port;
+	struct circ_buf *xmit = &port->state->xmit;
+	unsigned int num_tx = 0;
+	while (!uart_circ_empty(xmit) &&
+		!(rd_regl(port, SIRFUART_TX_FIFO_STATUS) &
+					SIRFUART_FIFOFULL_MASK(port)) &&
+		count--) {
+		wr_regl(port, SIRFUART_TX_FIFO_DATA, xmit->buf[xmit->tail]);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+		num_tx++;
+	}
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+	return num_tx;
+}
+
+static irqreturn_t sirfsoc_uart_isr(int irq, void *dev_id)
+{
+	unsigned long intr_status;
+	unsigned long cts_status;
+	unsigned long flag = TTY_NORMAL;
+	struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)dev_id;
+	struct uart_port *port = &sirfport->port;
+	struct uart_state *state = port->state;
+	struct circ_buf *xmit = &port->state->xmit;
+	intr_status = rd_regl(port, SIRFUART_INT_STATUS);
+	wr_regl(port, SIRFUART_INT_STATUS, intr_status);
+	intr_status &= rd_regl(port, SIRFUART_INT_EN);
+	if (unlikely(intr_status & (SIRFUART_ERR_INT_STAT))) {
+		if (intr_status & SIRFUART_RXD_BREAK) {
+			if (uart_handle_break(port))
+				goto recv_char;
+			uart_insert_char(port, intr_status,
+					SIRFUART_RX_OFLOW, 0, TTY_BREAK);
+			return IRQ_HANDLED;
+		}
+		if (intr_status & SIRFUART_RX_OFLOW)
+			port->icount.overrun++;
+		if (intr_status & SIRFUART_FRM_ERR) {
+			port->icount.frame++;
+			flag = TTY_FRAME;
+		}
+		if (intr_status & SIRFUART_PARITY_ERR)
+			flag = TTY_PARITY;
+		wr_regl(port, SIRFUART_RX_FIFO_OP, SIRFUART_RX_FIFO_RESET);
+		wr_regl(port, SIRFUART_RX_FIFO_OP, 0);
+		wr_regl(port, SIRFUART_RX_FIFO_OP, SIRFUART_RX_FIFO_START);
+		intr_status &= port->read_status_mask;
+		uart_insert_char(port, intr_status,
+					SIRFUART_RX_OFLOW_INT, 0, flag);
+	}
+recv_char:
+	if (intr_status & SIRFUART_CTS_INT_EN) {
+		cts_status = !(rd_regl(port, SIRFUART_AFC_CTRL) &
+							SIRFUART_CTS_IN_STATUS);
+		if (cts_status != 0) {
+			uart_handle_cts_change(port, 1);
+		} else {
+			uart_handle_cts_change(port, 0);
+			wake_up_interruptible(&state->port.delta_msr_wait);
+		}
+	}
+	if (intr_status & SIRFUART_RX_IO_INT_EN)
+		sirfsoc_uart_pio_rx_chars(port, SIRFSOC_UART_IO_RX_MAX_CNT);
+	if (intr_status & SIRFUART_TX_INT_EN) {
+		if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+			return IRQ_HANDLED;
+		} else {
+			sirfsoc_uart_pio_tx_chars(sirfport,
+					SIRFSOC_UART_IO_TX_REASONABLE_CNT);
+			if ((uart_circ_empty(xmit)) &&
+				(rd_regl(port, SIRFUART_TX_FIFO_STATUS) &
+						SIRFUART_FIFOEMPTY_MASK(port)))
+				sirfsoc_uart_stop_tx(port);
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+static void sirfsoc_uart_start_rx(struct uart_port *port)
+{
+	unsigned long regv;
+	regv = rd_regl(port, SIRFUART_INT_EN);
+	wr_regl(port, SIRFUART_INT_EN, regv | SIRFUART_RX_IO_INT_EN);
+	wr_regl(port, SIRFUART_RX_FIFO_OP, SIRFUART_RX_FIFO_RESET);
+	wr_regl(port, SIRFUART_RX_FIFO_OP, 0);
+	wr_regl(port, SIRFUART_RX_FIFO_OP, SIRFUART_RX_FIFO_START);
+}
+
+static unsigned int
+sirfsoc_calc_sample_div(unsigned long baud_rate,
+			unsigned long ioclk_rate, unsigned long *setted_baud)
+{
+	unsigned long min_delta = ~0UL;
+	unsigned short sample_div;
+	unsigned int regv = 0;
+	unsigned long ioclk_div;
+	unsigned long baud_tmp;
+	int temp_delta;
+
+	for (sample_div = SIRF_MIN_SAMPLE_DIV;
+			sample_div <= SIRF_MAX_SAMPLE_DIV; sample_div++) {
+		ioclk_div = (ioclk_rate / (baud_rate * (sample_div + 1))) - 1;
+		if (ioclk_div > SIRF_IOCLK_DIV_MAX)
+			continue;
+		baud_tmp = ioclk_rate / ((ioclk_div + 1) * (sample_div + 1));
+		temp_delta = baud_tmp - baud_rate;
+		temp_delta = (temp_delta > 0) ? temp_delta : -temp_delta;
+		if (temp_delta < min_delta) {
+			regv = regv & (~SIRF_IOCLK_DIV_MASK);
+			regv = regv | ioclk_div;
+			regv = regv & (~SIRF_SAMPLE_DIV_MASK);
+			regv = regv | (sample_div << SIRF_SAMPLE_DIV_SHIFT);
+			min_delta = temp_delta;
+			*setted_baud = baud_tmp;
+		}
+	}
+	return regv;
+}
+
+static void sirfsoc_uart_set_termios(struct uart_port *port,
+				       struct ktermios *termios,
+				       struct ktermios *old)
+{
+	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
+	unsigned long	ioclk_rate;
+	unsigned long	config_reg = 0;
+	unsigned long	baud_rate;
+	unsigned long	setted_baud;
+	unsigned long	flags;
+	unsigned long	ic;
+	unsigned int	clk_div_reg = 0;
+	unsigned long	temp_reg_val;
+	unsigned long	rx_time_out;
+	int		threshold_div;
+	int		temp;
+
+	ioclk_rate = 150000000;
+	switch (termios->c_cflag & CSIZE) {
+	default:
+	case CS8:
+		config_reg |= SIRFUART_DATA_BIT_LEN_8;
+		break;
+	case CS7:
+		config_reg |= SIRFUART_DATA_BIT_LEN_7;
+		break;
+	case CS6:
+		config_reg |= SIRFUART_DATA_BIT_LEN_6;
+		break;
+	case CS5:
+		config_reg |= SIRFUART_DATA_BIT_LEN_5;
+		break;
+	}
+	if (termios->c_cflag & CSTOPB)
+		config_reg |= SIRFUART_STOP_BIT_LEN_2;
+	baud_rate = uart_get_baud_rate(port, termios, old, 0, 4000000);
+	spin_lock_irqsave(&port->lock, flags);
+	port->read_status_mask = SIRFUART_RX_OFLOW_INT;
+	port->ignore_status_mask = 0;
+	/* read flags */
+	if (termios->c_iflag & INPCK)
+		port->read_status_mask |=
+			SIRFUART_FRM_ERR_INT | SIRFUART_PARITY_ERR_INT;
+	if (termios->c_iflag & (BRKINT | PARMRK))
+		port->read_status_mask |= SIRFUART_RXD_BREAK_INT;
+	/* ignore flags */
+	if (termios->c_iflag & IGNPAR)
+		port->ignore_status_mask |=
+			SIRFUART_FRM_ERR_INT | SIRFUART_PARITY_ERR_INT;
+	if ((termios->c_cflag & CREAD) == 0)
+		port->ignore_status_mask |= SIRFUART_DUMMY_READ;
+	/* enable parity if PARENB is set*/
+	if (termios->c_cflag & PARENB) {
+		if (termios->c_cflag & CMSPAR) {
+			if (termios->c_cflag & PARODD)
+				config_reg |= SIRFUART_STICK_BIT_MARK;
+			else
+				config_reg |= SIRFUART_STICK_BIT_SPACE;
+		} else if (termios->c_cflag & PARODD) {
+			config_reg |= SIRFUART_STICK_BIT_ODD;
+		} else {
+			config_reg |= SIRFUART_STICK_BIT_EVEN;
+		}
+	}
+	/* Hardware Flow Control Settings */
+	if (UART_ENABLE_MS(port, termios->c_cflag)) {
+		if (!sirfport->ms_enabled)
+			sirfsoc_uart_enable_ms(port);
+	} else {
+		if (sirfport->ms_enabled)
+			sirfsoc_uart_disable_ms(port);
+	}
+
+	/* common rate: fast calculation */
+	for (ic = 0; ic < SIRF_BAUD_RATE_SUPPORT_NR; ic++)
+		if (baud_rate == baudrate_to_regv[ic].baud_rate)
+			clk_div_reg = baudrate_to_regv[ic].reg_val;
+	setted_baud = baud_rate;
+	/* arbitary rate setting */
+	if (unlikely(clk_div_reg == 0))
+		clk_div_reg = sirfsoc_calc_sample_div(baud_rate, ioclk_rate,
+								&setted_baud);
+	wr_regl(port, SIRFUART_DIVISOR, clk_div_reg);
+
+	if (tty_termios_baud_rate(termios))
+		tty_termios_encode_baud_rate(termios, setted_baud, setted_baud);
+
+	/* set receive timeout */
+	rx_time_out = SIRFSOC_UART_RX_TIMEOUT(baud_rate, 20000);
+	rx_time_out = (rx_time_out > 0xFFFF) ? 0xFFFF : rx_time_out;
+	config_reg |= SIRFUART_RECV_TIMEOUT(rx_time_out);
+	temp_reg_val = rd_regl(port, SIRFUART_TX_FIFO_OP);
+	wr_regl(port, SIRFUART_RX_FIFO_OP, 0);
+	wr_regl(port, SIRFUART_TX_FIFO_OP,
+				temp_reg_val & ~SIRFUART_TX_FIFO_START);
+	wr_regl(port, SIRFUART_TX_DMA_IO_CTRL, SIRFUART_TX_MODE_IO);
+	wr_regl(port, SIRFUART_RX_DMA_IO_CTRL, SIRFUART_RX_MODE_IO);
+	wr_regl(port, SIRFUART_LINE_CTRL, config_reg);
+
+	/* Reset Rx/Tx FIFO Threshold level for proper baudrate */
+	if (baud_rate < 1000000)
+		threshold_div = 1;
+	else
+		threshold_div = 2;
+	temp = port->line == 1 ? 16 : 64;
+	wr_regl(port, SIRFUART_TX_FIFO_CTRL, temp / threshold_div);
+	wr_regl(port, SIRFUART_RX_FIFO_CTRL, temp / threshold_div);
+	temp_reg_val |= SIRFUART_TX_FIFO_START;
+	wr_regl(port, SIRFUART_TX_FIFO_OP, temp_reg_val);
+	uart_update_timeout(port, termios->c_cflag, baud_rate);
+	sirfsoc_uart_start_rx(port);
+	wr_regl(port, SIRFUART_TX_RX_EN, SIRFUART_TX_EN | SIRFUART_RX_EN);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void startup_uart_controller(struct uart_port *port)
+{
+	unsigned long temp_regv;
+	int temp;
+	temp_regv = rd_regl(port, SIRFUART_TX_DMA_IO_CTRL);
+	wr_regl(port, SIRFUART_TX_DMA_IO_CTRL, temp_regv | SIRFUART_TX_MODE_IO);
+	temp_regv = rd_regl(port, SIRFUART_RX_DMA_IO_CTRL);
+	wr_regl(port, SIRFUART_RX_DMA_IO_CTRL, temp_regv | SIRFUART_RX_MODE_IO);
+	wr_regl(port, SIRFUART_TX_DMA_IO_LEN, 0);
+	wr_regl(port, SIRFUART_RX_DMA_IO_LEN, 0);
+	wr_regl(port, SIRFUART_TX_RX_EN, SIRFUART_RX_EN | SIRFUART_TX_EN);
+	wr_regl(port, SIRFUART_TX_FIFO_OP, SIRFUART_TX_FIFO_RESET);
+	wr_regl(port, SIRFUART_TX_FIFO_OP, 0);
+	wr_regl(port, SIRFUART_RX_FIFO_OP, SIRFUART_RX_FIFO_RESET);
+	wr_regl(port, SIRFUART_RX_FIFO_OP, 0);
+	temp = port->line == 1 ? 16 : 64;
+	wr_regl(port, SIRFUART_TX_FIFO_CTRL, temp);
+	wr_regl(port, SIRFUART_RX_FIFO_CTRL, temp);
+}
+
+static int sirfsoc_uart_startup(struct uart_port *port)
+{
+	struct sirfsoc_uart_port *sirfport	= to_sirfport(port);
+	unsigned int index			= port->line;
+	int ret;
+	set_irq_flags(port->irq, IRQF_VALID | IRQF_NOAUTOEN);
+	ret = request_irq(port->irq,
+				sirfsoc_uart_isr,
+				0,
+				SIRFUART_PORT_NAME,
+				sirfport);
+	if (ret != 0) {
+		dev_err(port->dev, "UART%d request IRQ line (%d) failed.\n",
+							index, port->irq);
+		goto irq_err;
+	}
+	startup_uart_controller(port);
+	enable_irq(port->irq);
+irq_err:
+	return ret;
+}
+
+static void sirfsoc_uart_shutdown(struct uart_port *port)
+{
+	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
+	wr_regl(port, SIRFUART_INT_EN, 0);
+	free_irq(port->irq, sirfport);
+	if (sirfport->ms_enabled) {
+		sirfsoc_uart_disable_ms(port);
+		sirfport->ms_enabled = 0;
+	}
+}
+
+static const char *sirfsoc_uart_type(struct uart_port *port)
+{
+	return port->type == SIRFSOC_PORT_TYPE ? SIRFUART_PORT_NAME : NULL;
+}
+
+static int sirfsoc_uart_request_port(struct uart_port *port)
+{
+	void *ret;
+	ret = request_mem_region(port->mapbase,
+				SIRFUART_MAP_SIZE, SIRFUART_PORT_NAME);
+	return ret ? 0 : -EBUSY;
+}
+
+static void sirfsoc_uart_release_port(struct uart_port *port)
+{
+	release_mem_region(port->mapbase, SIRFUART_MAP_SIZE);
+}
+
+static void sirfsoc_uart_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE) {
+		port->type = SIRFSOC_PORT_TYPE;
+		sirfsoc_uart_request_port(port);
+	}
+}
+
+static struct uart_ops sirfsoc_uart_ops = {
+	.tx_empty	= sirfsoc_uart_tx_empty,
+	.get_mctrl	= sirfsoc_uart_get_mctrl,
+	.set_mctrl	= sirfsoc_uart_set_mctrl,
+	.stop_tx	= sirfsoc_uart_stop_tx,
+	.start_tx	= sirfsoc_uart_start_tx,
+	.stop_rx	= sirfsoc_uart_stop_rx,
+	.enable_ms	= sirfsoc_uart_enable_ms,
+	.break_ctl	= sirfsoc_uart_break_ctl,
+	.startup	= sirfsoc_uart_startup,
+	.shutdown	= sirfsoc_uart_shutdown,
+	.set_termios	= sirfsoc_uart_set_termios,
+	.type		= sirfsoc_uart_type,
+	.release_port	= sirfsoc_uart_release_port,
+	.request_port	= sirfsoc_uart_request_port,
+	.config_port	= sirfsoc_uart_config_port,
+};
+
+#ifdef CONFIG_SERIAL_SIRFSOC_CONSOLE
+static int __init sirfsoc_uart_console_setup(struct console *co, char *options)
+{
+	unsigned int baud = 115200;
+	unsigned int bits = 8;
+	unsigned int parity = 'n';
+	unsigned int flow = 'n';
+	struct uart_port *port = &sirfsoc_uart_ports[co->index].port;
+
+	if (co->index < 0 || co->index >= SIRFSOC_UART_NR)
+		return -EINVAL;
+
+	if (!port->mapbase)
+		return -ENODEV;
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+	port->cons = co;
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static void sirfsoc_uart_console_putchar(struct uart_port *port, int ch)
+{
+	while (rd_regl(port,
+		SIRFUART_TX_FIFO_STATUS) & SIRFUART_FIFOFULL_MASK(port))
+		cpu_relax();
+	wr_regb(port, SIRFUART_TX_FIFO_DATA, ch);
+}
+
+static void sirfsoc_uart_console_write(struct console *co, const char *s,
+							unsigned int count)
+{
+	struct uart_port *port = &sirfsoc_uart_ports[co->index].port;
+	uart_console_write(port, s, count, sirfsoc_uart_console_putchar);
+}
+
+static struct console sirfsoc_uart_console = {
+	.name		= SIRFSOC_UART_NAME,
+	.device		= uart_console_device,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
+	.write		= sirfsoc_uart_console_write,
+	.setup		= sirfsoc_uart_console_setup,
+	.data           = &sirfsoc_uart_drv,
+};
+
+static int __init sirfsoc_uart_console_init(void)
+{
+	register_console(&sirfsoc_uart_console);
+	return 0;
+}
+console_initcall(sirfsoc_uart_console_init);
+#endif
+
+static struct uart_driver sirfsoc_uart_drv = {
+	.owner		= THIS_MODULE,
+	.driver_name	= SIRFUART_PORT_NAME,
+	.nr		= SIRFSOC_UART_NR,
+	.dev_name	= SIRFSOC_UART_NAME,
+	.major		= SIRFSOC_UART_MAJOR,
+	.minor		= SIRFSOC_UART_MINOR,
+#ifdef CONFIG_SERIAL_SIRFSOC_CONSOLE
+	.cons			= &sirfsoc_uart_console,
+#else
+	.cons			= NULL,
+#endif
+};
+
+int sirfsoc_uart_probe(struct platform_device *pdev)
+{
+	struct sirfsoc_uart_port *sirfport;
+	struct uart_port *port;
+	struct resource *res;
+	int ret;
+
+	if (of_property_read_u32(pdev->dev.of_node, "cell-index", &pdev->id)) {
+		dev_err(&pdev->dev,
+			"Unable to find cell-index in uart node.\n");
+		ret = -EFAULT;
+		goto err;
+	}
+
+	sirfport = &sirfsoc_uart_ports[pdev->id];
+	port = &sirfport->port;
+	port->dev = &pdev->dev;
+	port->private_data = sirfport;
+
+	if (of_find_property(pdev->dev.of_node, "hw_flow_ctrl", NULL))
+		sirfport->hw_flow_ctrl = 1;
+
+	if (of_property_read_u32(pdev->dev.of_node,
+			"fifosize",
+			&port->fifosize)) {
+		dev_err(&pdev->dev,
+			"Unable to find fifosize in uart node.\n");
+		ret = -EFAULT;
+		goto err;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "Insufficient resources.\n");
+		ret = -EFAULT;
+		goto err;
+	}
+	port->mapbase = res->start;
+	port->membase = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	if (!port->membase) {
+		dev_err(&pdev->dev, "Cannot remap resource.\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "Insufficient resources.\n");
+		ret = -EFAULT;
+		goto irq_err;
+	}
+	port->irq = res->start;
+
+	if (sirfport->hw_flow_ctrl) {
+		sirfport->pmx = pinmux_get(&pdev->dev, NULL);
+		ret = IS_ERR(sirfport->pmx);
+		if (ret)
+			goto pmx_err;
+
+		pinmux_enable(sirfport->pmx);
+	}
+
+	port->ops = &sirfsoc_uart_ops;
+	spin_lock_init(&port->lock);
+
+	platform_set_drvdata(pdev, sirfport);
+	ret = uart_add_one_port(&sirfsoc_uart_drv, port);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Cannot add UART port(%d).\n", pdev->id);
+		goto port_err;
+	}
+
+	return 0;
+
+port_err:
+	platform_set_drvdata(pdev, NULL);
+	if (sirfport->hw_flow_ctrl) {
+		pinmux_disable(sirfport->pmx);
+		pinmux_put(sirfport->pmx);
+	}
+pmx_err:
+irq_err:
+	devm_iounmap(&pdev->dev, port->membase);
+err:
+	return ret;
+}
+
+static int sirfsoc_uart_remove(struct platform_device *pdev)
+{
+	struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev);
+	struct uart_port *port = &sirfport->port;
+	platform_set_drvdata(pdev, NULL);
+	if (sirfport->hw_flow_ctrl) {
+		pinmux_disable(sirfport->pmx);
+		pinmux_put(sirfport->pmx);
+	}
+	devm_iounmap(&pdev->dev, port->membase);
+	uart_remove_one_port(&sirfsoc_uart_drv, port);
+	return 0;
+}
+
+static int
+sirfsoc_uart_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev);
+	struct uart_port *port = &sirfport->port;
+	uart_suspend_port(&sirfsoc_uart_drv, port);
+	return 0;
+}
+
+static int sirfsoc_uart_resume(struct platform_device *pdev)
+{
+	struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev);
+	struct uart_port *port = &sirfport->port;
+	uart_resume_port(&sirfsoc_uart_drv, port);
+	return 0;
+}
+
+static struct of_device_id sirfsoc_uart_ids[] __devinitdata = {
+	{ .compatible = "sirf,prima2-uart", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sirfsoc_serial_of_match);
+
+static struct platform_driver sirfsoc_uart_driver = {
+	.probe		= sirfsoc_uart_probe,
+	.remove		= __devexit_p(sirfsoc_uart_remove),
+	.suspend	= sirfsoc_uart_suspend,
+	.resume		= sirfsoc_uart_resume,
+	.driver		= {
+		.name	= SIRFUART_PORT_NAME,
+		.owner	= THIS_MODULE,
+		.of_match_table = sirfsoc_uart_ids,
+	},
+};
+
+static int __init sirfsoc_uart_init(void)
+{
+	int ret = 0;
+
+	ret = uart_register_driver(&sirfsoc_uart_drv);
+	if (ret)
+		goto out;
+
+	ret = platform_driver_register(&sirfsoc_uart_driver);
+	if (ret)
+		uart_unregister_driver(&sirfsoc_uart_drv);
+out:
+	return ret;
+}
+module_init(sirfsoc_uart_init);
+
+static void __exit sirfsoc_uart_exit(void)
+{
+	platform_driver_unregister(&sirfsoc_uart_driver);
+	uart_unregister_driver(&sirfsoc_uart_drv);
+}
+module_exit(sirfsoc_uart_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Bin Shi <Bin.Shi@csr.com>, Rong Wang<Rong.Wang@csr.com>");
+MODULE_DESCRIPTION("CSR SiRFprimaII Uart Driver");
diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h
new file mode 100644
index 00000000000..fc64260fa93
--- /dev/null
+++ b/drivers/tty/serial/sirfsoc_uart.h
@@ -0,0 +1,185 @@
+/*
+ * Drivers for CSR SiRFprimaII onboard UARTs.
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include <linux/bitops.h>
+
+/* UART Register Offset Define */
+#define SIRFUART_LINE_CTRL			0x0040
+#define SIRFUART_TX_RX_EN			0x004c
+#define SIRFUART_DIVISOR			0x0050
+#define SIRFUART_INT_EN				0x0054
+#define SIRFUART_INT_STATUS			0x0058
+#define SIRFUART_TX_DMA_IO_CTRL			0x0100
+#define SIRFUART_TX_DMA_IO_LEN			0x0104
+#define SIRFUART_TX_FIFO_CTRL			0x0108
+#define SIRFUART_TX_FIFO_LEVEL_CHK		0x010C
+#define SIRFUART_TX_FIFO_OP			0x0110
+#define SIRFUART_TX_FIFO_STATUS			0x0114
+#define SIRFUART_TX_FIFO_DATA			0x0118
+#define SIRFUART_RX_DMA_IO_CTRL			0x0120
+#define SIRFUART_RX_DMA_IO_LEN			0x0124
+#define SIRFUART_RX_FIFO_CTRL			0x0128
+#define SIRFUART_RX_FIFO_LEVEL_CHK		0x012C
+#define SIRFUART_RX_FIFO_OP			0x0130
+#define SIRFUART_RX_FIFO_STATUS			0x0134
+#define SIRFUART_RX_FIFO_DATA			0x0138
+#define SIRFUART_AFC_CTRL			0x0140
+#define SIRFUART_SWH_DMA_IO			0x0148
+
+/* UART Line Control Register */
+#define SIRFUART_DATA_BIT_LEN_MASK		0x3
+#define SIRFUART_DATA_BIT_LEN_5			BIT(0)
+#define SIRFUART_DATA_BIT_LEN_6			1
+#define SIRFUART_DATA_BIT_LEN_7			2
+#define SIRFUART_DATA_BIT_LEN_8			3
+#define SIRFUART_STOP_BIT_LEN_1			0
+#define SIRFUART_STOP_BIT_LEN_2			BIT(2)
+#define SIRFUART_PARITY_EN			BIT(3)
+#define SIRFUART_EVEN_BIT			BIT(4)
+#define SIRFUART_STICK_BIT_MASK			(7 << 3)
+#define SIRFUART_STICK_BIT_NONE			(0 << 3)
+#define SIRFUART_STICK_BIT_EVEN			BIT(3)
+#define SIRFUART_STICK_BIT_ODD			(3 << 3)
+#define SIRFUART_STICK_BIT_MARK			(5 << 3)
+#define SIRFUART_STICK_BIT_SPACE		(7 << 3)
+#define SIRFUART_SET_BREAK			BIT(6)
+#define SIRFUART_LOOP_BACK			BIT(7)
+#define SIRFUART_PARITY_MASK			(7 << 3)
+#define SIRFUART_DUMMY_READ			BIT(16)
+
+#define SIRFSOC_UART_RX_TIMEOUT(br, to)	(((br) * (((to) + 999) / 1000)) / 1000)
+#define SIRFUART_RECV_TIMEOUT_MASK	(0xFFFF << 16)
+#define SIRFUART_RECV_TIMEOUT(x)	(((x) & 0xFFFF) << 16)
+
+/* UART Auto Flow Control */
+#define SIRFUART_AFC_RX_THD_MASK		0x000000FF
+#define SIRFUART_AFC_RX_EN			BIT(8)
+#define SIRFUART_AFC_TX_EN			BIT(9)
+#define SIRFUART_CTS_CTRL			BIT(10)
+#define SIRFUART_RTS_CTRL			BIT(11)
+#define SIRFUART_CTS_IN_STATUS			BIT(12)
+#define SIRFUART_RTS_OUT_STATUS			BIT(13)
+
+/* UART Interrupt Enable Register */
+#define SIRFUART_RX_DONE_INT			BIT(0)
+#define SIRFUART_TX_DONE_INT			BIT(1)
+#define SIRFUART_RX_OFLOW_INT			BIT(2)
+#define SIRFUART_TX_ALLOUT_INT			BIT(3)
+#define SIRFUART_RX_IO_DMA_INT			BIT(4)
+#define SIRFUART_TX_IO_DMA_INT			BIT(5)
+#define SIRFUART_RXFIFO_FULL_INT		BIT(6)
+#define SIRFUART_TXFIFO_EMPTY_INT		BIT(7)
+#define SIRFUART_RXFIFO_THD_INT			BIT(8)
+#define SIRFUART_TXFIFO_THD_INT			BIT(9)
+#define SIRFUART_FRM_ERR_INT			BIT(10)
+#define SIRFUART_RXD_BREAK_INT			BIT(11)
+#define SIRFUART_RX_TIMEOUT_INT			BIT(12)
+#define SIRFUART_PARITY_ERR_INT			BIT(13)
+#define SIRFUART_CTS_INT_EN			BIT(14)
+#define SIRFUART_RTS_INT_EN			BIT(15)
+
+/* UART Interrupt Status Register */
+#define SIRFUART_RX_DONE			BIT(0)
+#define SIRFUART_TX_DONE			BIT(1)
+#define SIRFUART_RX_OFLOW			BIT(2)
+#define SIRFUART_TX_ALL_EMPTY			BIT(3)
+#define SIRFUART_DMA_IO_RX_DONE			BIT(4)
+#define SIRFUART_DMA_IO_TX_DONE			BIT(5)
+#define SIRFUART_RXFIFO_FULL			BIT(6)
+#define SIRFUART_TXFIFO_EMPTY			BIT(7)
+#define SIRFUART_RXFIFO_THD_REACH		BIT(8)
+#define SIRFUART_TXFIFO_THD_REACH		BIT(9)
+#define SIRFUART_FRM_ERR			BIT(10)
+#define SIRFUART_RXD_BREAK			BIT(11)
+#define SIRFUART_RX_TIMEOUT			BIT(12)
+#define SIRFUART_PARITY_ERR			BIT(13)
+#define SIRFUART_CTS_CHANGE			BIT(14)
+#define SIRFUART_RTS_CHANGE			BIT(15)
+#define SIRFUART_PLUG_IN			BIT(16)
+
+#define SIRFUART_ERR_INT_STAT					\
+				(SIRFUART_RX_OFLOW |		\
+				SIRFUART_FRM_ERR |		\
+				SIRFUART_RXD_BREAK |		\
+				SIRFUART_PARITY_ERR)
+#define SIRFUART_ERR_INT_EN					\
+				(SIRFUART_RX_OFLOW_INT |	\
+				SIRFUART_FRM_ERR_INT |		\
+				SIRFUART_RXD_BREAK_INT |	\
+				SIRFUART_PARITY_ERR_INT)
+#define SIRFUART_TX_INT_EN	SIRFUART_TXFIFO_EMPTY_INT
+#define SIRFUART_RX_IO_INT_EN					\
+				(SIRFUART_RX_TIMEOUT_INT |	\
+				SIRFUART_RXFIFO_THD_INT |	\
+				SIRFUART_RXFIFO_FULL_INT |	\
+				SIRFUART_ERR_INT_EN)
+
+/* UART FIFO Register */
+#define SIRFUART_TX_FIFO_STOP			0x0
+#define SIRFUART_TX_FIFO_RESET			0x1
+#define SIRFUART_TX_FIFO_START			0x2
+#define SIRFUART_RX_FIFO_STOP			0x0
+#define SIRFUART_RX_FIFO_RESET			0x1
+#define SIRFUART_RX_FIFO_START			0x2
+#define SIRFUART_TX_MODE_DMA			0
+#define SIRFUART_TX_MODE_IO			1
+#define SIRFUART_RX_MODE_DMA			0
+#define SIRFUART_RX_MODE_IO			1
+
+#define SIRFUART_RX_EN				0x1
+#define SIRFUART_TX_EN				0x2
+
+/* Generic Definitions */
+#define SIRFSOC_UART_NAME			"ttySiRF"
+#define SIRFSOC_UART_MAJOR			0
+#define SIRFSOC_UART_MINOR			0
+#define SIRFUART_PORT_NAME			"sirfsoc-uart"
+#define SIRFUART_MAP_SIZE			0x200
+#define SIRFSOC_UART_NR				3
+#define SIRFSOC_PORT_TYPE			0xa5
+
+/* Baud Rate Calculation */
+#define SIRF_MIN_SAMPLE_DIV			0xf
+#define SIRF_MAX_SAMPLE_DIV			0x3f
+#define SIRF_IOCLK_DIV_MAX			0xffff
+#define SIRF_SAMPLE_DIV_SHIFT			16
+#define SIRF_IOCLK_DIV_MASK			0xffff
+#define SIRF_SAMPLE_DIV_MASK			0x3f0000
+#define SIRF_BAUD_RATE_SUPPORT_NR		18
+
+/* For Fast Baud Rate Calculation */
+struct sirfsoc_baudrate_to_regv {
+	unsigned int baud_rate;
+	unsigned int reg_val;
+};
+
+struct sirfsoc_uart_port {
+	unsigned char			hw_flow_ctrl;
+	unsigned char			ms_enabled;
+
+	struct uart_port		port;
+	struct pinmux			*pmx;
+};
+
+/* Hardware Flow Control */
+#define SIRFUART_AFC_CTRL_RX_THD	0x70
+
+/* Register Access Control */
+#define portaddr(port, reg)		((port)->membase + (reg))
+#define rd_regb(port, reg)		(__raw_readb(portaddr(port, reg)))
+#define rd_regl(port, reg)		(__raw_readl(portaddr(port, reg)))
+#define wr_regb(port, reg, val)		__raw_writeb(val, portaddr(port, reg))
+#define wr_regl(port, reg, val)		__raw_writel(val, portaddr(port, reg))
+
+/* UART Port Mask */
+#define SIRFUART_FIFOLEVEL_MASK(port)	((port->line == 1) ? (0x1f) : (0x7f))
+#define SIRFUART_FIFOFULL_MASK(port)	((port->line == 1) ? (0x20) : (0x80))
+#define SIRFUART_FIFOEMPTY_MASK(port)	((port->line == 1) ? (0x40) : (0x100))
+
+/* I/O Mode */
+#define SIRFSOC_UART_IO_RX_MAX_CNT		256
+#define SIRFSOC_UART_IO_TX_REASONABLE_CNT	6
diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c
index e76c8b747fb..70f97491d8f 100644
--- a/drivers/tty/serial/timbuart.c
+++ b/drivers/tty/serial/timbuart.c
@@ -513,20 +513,7 @@ static struct platform_driver timbuart_platform_driver = {
 	.remove		= __devexit_p(timbuart_remove),
 };
 
-/*--------------------------------------------------------------------------*/
-
-static int __init timbuart_init(void)
-{
-	return platform_driver_register(&timbuart_platform_driver);
-}
-
-static void __exit timbuart_exit(void)
-{
-	platform_driver_unregister(&timbuart_platform_driver);
-}
-
-module_init(timbuart_init);
-module_exit(timbuart_exit);
+module_platform_driver(timbuart_platform_driver);
 
 MODULE_DESCRIPTION("Timberdale UART driver");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/vr41xx_siu.c b/drivers/tty/serial/vr41xx_siu.c
index 3beb6ab4fa6..83148e79ca1 100644
--- a/drivers/tty/serial/vr41xx_siu.c
+++ b/drivers/tty/serial/vr41xx_siu.c
@@ -961,18 +961,7 @@ static struct platform_driver siu_device_driver = {
 	},
 };
 
-static int __init vr41xx_siu_init(void)
-{
-	return platform_driver_register(&siu_device_driver);
-}
-
-static void __exit vr41xx_siu_exit(void)
-{
-	platform_driver_unregister(&siu_device_driver);
-}
-
-module_init(vr41xx_siu_init);
-module_exit(vr41xx_siu_exit);
+module_platform_driver(siu_device_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:SIU");
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 3fdebd306b9..e41b9bbc107 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -790,19 +790,24 @@ static void session_clear_tty(struct pid *session)
 void disassociate_ctty(int on_exit)
 {
 	struct tty_struct *tty;
-	struct pid *tty_pgrp = NULL;
 
 	if (!current->signal->leader)
 		return;
 
 	tty = get_current_tty();
 	if (tty) {
-		tty_pgrp = get_pid(tty->pgrp);
+		struct pid *tty_pgrp = get_pid(tty->pgrp);
 		if (on_exit) {
 			if (tty->driver->type != TTY_DRIVER_TYPE_PTY)
 				tty_vhangup(tty);
 		}
 		tty_kref_put(tty);
+		if (tty_pgrp) {
+			kill_pgrp(tty_pgrp, SIGHUP, on_exit);
+			if (!on_exit)
+				kill_pgrp(tty_pgrp, SIGCONT, on_exit);
+			put_pid(tty_pgrp);
+		}
 	} else if (on_exit) {
 		struct pid *old_pgrp;
 		spin_lock_irq(&current->sighand->siglock);
@@ -816,12 +821,6 @@ void disassociate_ctty(int on_exit)
 		}
 		return;
 	}
-	if (tty_pgrp) {
-		kill_pgrp(tty_pgrp, SIGHUP, on_exit);
-		if (!on_exit)
-			kill_pgrp(tty_pgrp, SIGCONT, on_exit);
-		put_pid(tty_pgrp);
-	}
 
 	spin_lock_irq(&current->sighand->siglock);
 	put_pid(current->signal->tty_old_pgrp);
@@ -1558,6 +1557,59 @@ static void release_tty(struct tty_struct *tty, int idx)
 }
 
 /**
+ *	tty_release_checks - check a tty before real release
+ *	@tty: tty to check
+ *	@o_tty: link of @tty (if any)
+ *	@idx: index of the tty
+ *
+ *	Performs some paranoid checking before true release of the @tty.
+ *	This is a no-op unless TTY_PARANOIA_CHECK is defined.
+ */
+static int tty_release_checks(struct tty_struct *tty, struct tty_struct *o_tty,
+		int idx)
+{
+#ifdef TTY_PARANOIA_CHECK
+	if (idx < 0 || idx >= tty->driver->num) {
+		printk(KERN_DEBUG "%s: bad idx when trying to free (%s)\n",
+				__func__, tty->name);
+		return -1;
+	}
+
+	/* not much to check for devpts */
+	if (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM)
+		return 0;
+
+	if (tty != tty->driver->ttys[idx]) {
+		printk(KERN_DEBUG "%s: driver.table[%d] not tty for (%s)\n",
+				__func__, idx, tty->name);
+		return -1;
+	}
+	if (tty->termios != tty->driver->termios[idx]) {
+		printk(KERN_DEBUG "%s: driver.termios[%d] not termios for (%s)\n",
+				__func__, idx, tty->name);
+		return -1;
+	}
+	if (tty->driver->other) {
+		if (o_tty != tty->driver->other->ttys[idx]) {
+			printk(KERN_DEBUG "%s: other->table[%d] not o_tty for (%s)\n",
+					__func__, idx, tty->name);
+			return -1;
+		}
+		if (o_tty->termios != tty->driver->other->termios[idx]) {
+			printk(KERN_DEBUG "%s: other->termios[%d] not o_termios for (%s)\n",
+					__func__, idx, tty->name);
+			return -1;
+		}
+		if (o_tty->link != tty) {
+			printk(KERN_DEBUG "%s: bad pty pointers\n", __func__);
+			return -1;
+		}
+	}
+#endif
+	return 0;
+}
+
+/**
  *	tty_release		-	vfs callback for close
  *	@inode: inode of tty
  *	@filp: file pointer for handle to tty
@@ -1585,11 +1637,11 @@ int tty_release(struct inode *inode, struct file *filp)
 	int	idx;
 	char	buf[64];
 
-	if (tty_paranoia_check(tty, inode, "tty_release_dev"))
+	if (tty_paranoia_check(tty, inode, __func__))
 		return 0;
 
 	tty_lock();
-	check_tty_count(tty, "tty_release_dev");
+	check_tty_count(tty, __func__);
 
 	__tty_fasync(-1, filp, 0);
 
@@ -1599,59 +1651,16 @@ int tty_release(struct inode *inode, struct file *filp)
 	devpts = (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM) != 0;
 	o_tty = tty->link;
 
-#ifdef TTY_PARANOIA_CHECK
-	if (idx < 0 || idx >= tty->driver->num) {
-		printk(KERN_DEBUG "tty_release_dev: bad idx when trying to "
-				  "free (%s)\n", tty->name);
+	if (tty_release_checks(tty, o_tty, idx)) {
 		tty_unlock();
 		return 0;
 	}
-	if (!devpts) {
-		if (tty != tty->driver->ttys[idx]) {
-			tty_unlock();
-			printk(KERN_DEBUG "tty_release_dev: driver.table[%d] not tty "
-			       "for (%s)\n", idx, tty->name);
-			return 0;
-		}
-		if (tty->termios != tty->driver->termios[idx]) {
-			tty_unlock();
-			printk(KERN_DEBUG "tty_release_dev: driver.termios[%d] not termios "
-			       "for (%s)\n",
-			       idx, tty->name);
-			return 0;
-		}
-	}
-#endif
 
 #ifdef TTY_DEBUG_HANGUP
-	printk(KERN_DEBUG "tty_release_dev of %s (tty count=%d)...",
-	       tty_name(tty, buf), tty->count);
+	printk(KERN_DEBUG "%s: %s (tty count=%d)...\n", __func__,
+			tty_name(tty, buf), tty->count);
 #endif
 
-#ifdef TTY_PARANOIA_CHECK
-	if (tty->driver->other &&
-	     !(tty->driver->flags & TTY_DRIVER_DEVPTS_MEM)) {
-		if (o_tty != tty->driver->other->ttys[idx]) {
-			tty_unlock();
-			printk(KERN_DEBUG "tty_release_dev: other->table[%d] "
-					  "not o_tty for (%s)\n",
-			       idx, tty->name);
-			return 0 ;
-		}
-		if (o_tty->termios != tty->driver->other->termios[idx]) {
-			tty_unlock();
-			printk(KERN_DEBUG "tty_release_dev: other->termios[%d] "
-					  "not o_termios for (%s)\n",
-			       idx, tty->name);
-			return 0;
-		}
-		if (o_tty->link != tty) {
-			tty_unlock();
-			printk(KERN_DEBUG "tty_release_dev: bad pty pointers\n");
-			return 0;
-		}
-	}
-#endif
 	if (tty->ops->close)
 		tty->ops->close(tty, filp);
 
@@ -1707,8 +1716,8 @@ int tty_release(struct inode *inode, struct file *filp)
 		if (!do_sleep)
 			break;
 
-		printk(KERN_WARNING "tty_release_dev: %s: read/write wait queue "
-				    "active!\n", tty_name(tty, buf));
+		printk(KERN_WARNING "%s: %s: read/write wait queue active!\n",
+				__func__, tty_name(tty, buf));
 		tty_unlock();
 		mutex_unlock(&tty_mutex);
 		schedule();
@@ -1721,15 +1730,14 @@ int tty_release(struct inode *inode, struct file *filp)
 	 */
 	if (pty_master) {
 		if (--o_tty->count < 0) {
-			printk(KERN_WARNING "tty_release_dev: bad pty slave count "
-					    "(%d) for %s\n",
-			       o_tty->count, tty_name(o_tty, buf));
+			printk(KERN_WARNING "%s: bad pty slave count (%d) for %s\n",
+				__func__, o_tty->count, tty_name(o_tty, buf));
 			o_tty->count = 0;
 		}
 	}
 	if (--tty->count < 0) {
-		printk(KERN_WARNING "tty_release_dev: bad tty->count (%d) for %s\n",
-		       tty->count, tty_name(tty, buf));
+		printk(KERN_WARNING "%s: bad tty->count (%d) for %s\n",
+				__func__, tty->count, tty_name(tty, buf));
 		tty->count = 0;
 	}
 
@@ -1778,7 +1786,7 @@ int tty_release(struct inode *inode, struct file *filp)
 	}
 
 #ifdef TTY_DEBUG_HANGUP
-	printk(KERN_DEBUG "freeing tty structure...");
+	printk(KERN_DEBUG "%s: freeing tty structure...\n", __func__);
 #endif
 	/*
 	 * Ask the line discipline code to release its structures
@@ -1798,6 +1806,83 @@ int tty_release(struct inode *inode, struct file *filp)
 }
 
 /**
+ *	tty_open_current_tty - get tty of current task for open
+ *	@device: device number
+ *	@filp: file pointer to tty
+ *	@return: tty of the current task iff @device is /dev/tty
+ *
+ *	We cannot return driver and index like for the other nodes because
+ *	devpts will not work then. It expects inodes to be from devpts FS.
+ */
+static struct tty_struct *tty_open_current_tty(dev_t device, struct file *filp)
+{
+	struct tty_struct *tty;
+
+	if (device != MKDEV(TTYAUX_MAJOR, 0))
+		return NULL;
+
+	tty = get_current_tty();
+	if (!tty)
+		return ERR_PTR(-ENXIO);
+
+	filp->f_flags |= O_NONBLOCK; /* Don't let /dev/tty block */
+	/* noctty = 1; */
+	tty_kref_put(tty);
+	/* FIXME: we put a reference and return a TTY! */
+	return tty;
+}
+
+/**
+ *	tty_lookup_driver - lookup a tty driver for a given device file
+ *	@device: device number
+ *	@filp: file pointer to tty
+ *	@noctty: set if the device should not become a controlling tty
+ *	@index: index for the device in the @return driver
+ *	@return: driver for this inode (with increased refcount)
+ *
+ * 	If @return is not erroneous, the caller is responsible to decrement the
+ * 	refcount by tty_driver_kref_put.
+ *
+ *	Locking: tty_mutex protects get_tty_driver
+ */
+static struct tty_driver *tty_lookup_driver(dev_t device, struct file *filp,
+		int *noctty, int *index)
+{
+	struct tty_driver *driver;
+
+	switch (device) {
+#ifdef CONFIG_VT
+	case MKDEV(TTY_MAJOR, 0): {
+		extern struct tty_driver *console_driver;
+		driver = tty_driver_kref_get(console_driver);
+		*index = fg_console;
+		*noctty = 1;
+		break;
+	}
+#endif
+	case MKDEV(TTYAUX_MAJOR, 1): {
+		struct tty_driver *console_driver = console_device(index);
+		if (console_driver) {
+			driver = tty_driver_kref_get(console_driver);
+			if (driver) {
+				/* Don't let /dev/console block */
+				filp->f_flags |= O_NONBLOCK;
+				*noctty = 1;
+				break;
+			}
+		}
+		return ERR_PTR(-ENODEV);
+	}
+	default:
+		driver = get_tty_driver(device, index);
+		if (!driver)
+			return ERR_PTR(-ENODEV);
+		break;
+	}
+	return driver;
+}
+
+/**
  *	tty_open		-	open a tty device
  *	@inode: inode of device file
  *	@filp: file pointer to tty
@@ -1813,16 +1898,16 @@ int tty_release(struct inode *inode, struct file *filp)
  *	The termios state of a pty is reset on first open so that
  *	settings don't persist across reuse.
  *
- *	Locking: tty_mutex protects tty, get_tty_driver and tty_init_dev work.
+ *	Locking: tty_mutex protects tty, tty_lookup_driver and tty_init_dev.
  *		 tty->count should protect the rest.
  *		 ->siglock protects ->signal/->sighand
  */
 
 static int tty_open(struct inode *inode, struct file *filp)
 {
-	struct tty_struct *tty = NULL;
+	struct tty_struct *tty;
 	int noctty, retval;
-	struct tty_driver *driver;
+	struct tty_driver *driver = NULL;
 	int index;
 	dev_t device = inode->i_rdev;
 	unsigned saved_flags = filp->f_flags;
@@ -1841,66 +1926,22 @@ retry_open:
 	mutex_lock(&tty_mutex);
 	tty_lock();
 
-	if (device == MKDEV(TTYAUX_MAJOR, 0)) {
-		tty = get_current_tty();
-		if (!tty) {
-			tty_unlock();
-			mutex_unlock(&tty_mutex);
-			tty_free_file(filp);
-			return -ENXIO;
-		}
-		driver = tty_driver_kref_get(tty->driver);
-		index = tty->index;
-		filp->f_flags |= O_NONBLOCK; /* Don't let /dev/tty block */
-		/* noctty = 1; */
-		/* FIXME: Should we take a driver reference ? */
-		tty_kref_put(tty);
-		goto got_driver;
-	}
-#ifdef CONFIG_VT
-	if (device == MKDEV(TTY_MAJOR, 0)) {
-		extern struct tty_driver *console_driver;
-		driver = tty_driver_kref_get(console_driver);
-		index = fg_console;
-		noctty = 1;
-		goto got_driver;
-	}
-#endif
-	if (device == MKDEV(TTYAUX_MAJOR, 1)) {
-		struct tty_driver *console_driver = console_device(&index);
-		if (console_driver) {
-			driver = tty_driver_kref_get(console_driver);
-			if (driver) {
-				/* Don't let /dev/console block */
-				filp->f_flags |= O_NONBLOCK;
-				noctty = 1;
-				goto got_driver;
-			}
+	tty = tty_open_current_tty(device, filp);
+	if (IS_ERR(tty)) {
+		retval = PTR_ERR(tty);
+		goto err_unlock;
+	} else if (!tty) {
+		driver = tty_lookup_driver(device, filp, &noctty, &index);
+		if (IS_ERR(driver)) {
+			retval = PTR_ERR(driver);
+			goto err_unlock;
 		}
-		tty_unlock();
-		mutex_unlock(&tty_mutex);
-		tty_free_file(filp);
-		return -ENODEV;
-	}
 
-	driver = get_tty_driver(device, &index);
-	if (!driver) {
-		tty_unlock();
-		mutex_unlock(&tty_mutex);
-		tty_free_file(filp);
-		return -ENODEV;
-	}
-got_driver:
-	if (!tty) {
 		/* check whether we're reopening an existing tty */
 		tty = tty_driver_lookup_tty(driver, inode, index);
-
 		if (IS_ERR(tty)) {
-			tty_unlock();
-			mutex_unlock(&tty_mutex);
-			tty_driver_kref_put(driver);
-			tty_free_file(filp);
-			return PTR_ERR(tty);
+			retval = PTR_ERR(tty);
+			goto err_unlock;
 		}
 	}
 
@@ -1912,21 +1953,22 @@ got_driver:
 		tty = tty_init_dev(driver, index, 0);
 
 	mutex_unlock(&tty_mutex);
-	tty_driver_kref_put(driver);
+	if (driver)
+		tty_driver_kref_put(driver);
 	if (IS_ERR(tty)) {
 		tty_unlock();
-		tty_free_file(filp);
-		return PTR_ERR(tty);
+		retval = PTR_ERR(tty);
+		goto err_file;
 	}
 
 	tty_add_file(tty, filp);
 
-	check_tty_count(tty, "tty_open");
+	check_tty_count(tty, __func__);
 	if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
 	    tty->driver->subtype == PTY_TYPE_MASTER)
 		noctty = 1;
 #ifdef TTY_DEBUG_HANGUP
-	printk(KERN_DEBUG "opening %s...", tty->name);
+	printk(KERN_DEBUG "%s: opening %s...\n", __func__, tty->name);
 #endif
 	if (tty->ops->open)
 		retval = tty->ops->open(tty, filp);
@@ -1940,8 +1982,8 @@ got_driver:
 
 	if (retval) {
 #ifdef TTY_DEBUG_HANGUP
-		printk(KERN_DEBUG "error %d in opening %s...", retval,
-		       tty->name);
+		printk(KERN_DEBUG "%s: error %d in opening %s...\n", __func__,
+				retval, tty->name);
 #endif
 		tty_unlock(); /* need to call tty_release without BTM */
 		tty_release(inode, filp);
@@ -1976,6 +2018,15 @@ got_driver:
 	tty_unlock();
 	mutex_unlock(&tty_mutex);
 	return 0;
+err_unlock:
+	tty_unlock();
+	mutex_unlock(&tty_mutex);
+	/* after locks to avoid deadlock */
+	if (!IS_ERR_OR_NULL(driver))
+		tty_driver_kref_put(driver);
+err_file:
+	tty_free_file(filp);
+	return retval;
 }
 
 
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 8e0924f5544..24b95db75d8 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -1,19 +1,11 @@
 #include <linux/types.h>
-#include <linux/major.h>
 #include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/fcntl.h>
+#include <linux/kmod.h>
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/tty.h>
 #include <linux/tty_driver.h>
-#include <linux/tty_flip.h>
-#include <linux/devpts_fs.h>
 #include <linux/file.h>
-#include <linux/console.h>
-#include <linux/timer.h>
-#include <linux/ctype.h>
-#include <linux/kd.h>
 #include <linux/mm.h>
 #include <linux/string.h>
 #include <linux/slab.h>
@@ -24,18 +16,8 @@
 #include <linux/device.h>
 #include <linux/wait.h>
 #include <linux/bitops.h>
-#include <linux/delay.h>
 #include <linux/seq_file.h>
-
 #include <linux/uaccess.h>
-#include <asm/system.h>
-
-#include <linux/kbd_kern.h>
-#include <linux/vt_kern.h>
-#include <linux/selection.h>
-
-#include <linux/kmod.h>
-#include <linux/nsproxy.h>
 #include <linux/ratelimit.h>
 
 /*
@@ -558,8 +540,6 @@ static int tty_ldisc_wait_idle(struct tty_struct *tty, long timeout)
 	long ret;
 	ret = wait_event_timeout(tty_ldisc_idle,
 			atomic_read(&tty->ldisc->users) == 1, timeout);
-	if (ret < 0)
-		return ret;
 	return ret > 0 ? 0 : -EBUSY;
 }
 
diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c
index 45d3e80156d..a0f3d6c4d39 100644
--- a/drivers/tty/vt/consolemap.c
+++ b/drivers/tty/vt/consolemap.c
@@ -584,7 +584,7 @@ int con_set_default_unimap(struct vc_data *vc)
 			return 0;
 		dflt->refcount++;
 		*vc->vc_uni_pagedir_loc = (unsigned long)dflt;
-		if (p && --p->refcount) {
+		if (p && !--p->refcount) {
 			con_release_unimap(p);
 			kfree(p);
 		}