Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits)
  trivial: Update my email address
  trivial: NULL noise: drivers/mtd/tests/mtd_*test.c
  trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h
  trivial: Fix misspelling of "Celsius".
  trivial: remove unused variable 'path' in alloc_file()
  trivial: fix a pdlfush -> pdflush typo in comment
  trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL
  trivial: wusb: Storage class should be before const qualifier
  trivial: drivers/char/bsr.c: Storage class should be before const qualifier
  trivial: h8300: Storage class should be before const qualifier
  trivial: fix where cgroup documentation is not correctly referred to
  trivial: Give the right path in Documentation example
  trivial: MTD: remove EOL from MODULE_DESCRIPTION
  trivial: Fix typo in bio_split()'s documentation
  trivial: PWM: fix of #endif comment
  trivial: fix typos/grammar errors in Kconfig texts
  trivial: Fix misspelling of firmware
  trivial: cgroups: documentation typo and spelling corrections
  trivial: Update contact info for Jochen Hein
  trivial: fix typo "resgister" -> "register"
  ...

49 files changed, 79 insertions, 77 deletions

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index c11f9aeca70..1ba9d61ea69 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -367,7 +367,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 		/*
 		 * Treat freezing temperatures as invalid as well; some
 		 * BIOSes return really low values and cause reboots at startup.
-		 * Below zero (Celcius) values clearly aren't right for sure..
+		 * Below zero (Celsius) values clearly aren't right for sure..
 		 * ... so lets discard those as invalid.
 		 */
 		if (ACPI_FAILURE(status) ||
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 0bcf2646467..9120717c070 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -86,7 +86,7 @@ config ATA_SFF
 
 	  For users with exclusively modern controllers like AHCI,
 	  Silicon Image 3124, or Marvell 6440, you may choose to
-	  disable this uneeded SFF support.
+	  disable this unneeded SFF support.
 
 	  If unsure, say Y.
 
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 76ce75bad91..3236b434b96 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -300,7 +300,7 @@ void sysdev_unregister(struct sys_device *sysdev)
  *	and the class driver.
  *
  *	Note: The list is iterated in reverse order, so that we shut down
- *	child devices before we shut down thier parents. The list ordering
+ *	child devices before we shut down their parents. The list ordering
  *	is guaranteed by virtue of the fact that child devices are registered
  *	after their parents.
  */
diff --git a/drivers/char/bsr.c b/drivers/char/bsr.c
index f6094ae0ef3..140ea10ecb8 100644
--- a/drivers/char/bsr.c
+++ b/drivers/char/bsr.c
@@ -140,7 +140,7 @@ static int bsr_open(struct inode * inode, struct file * filp)
 	return 0;
 }
 
-const static struct file_operations bsr_fops = {
+static const struct file_operations bsr_fops = {
 	.owner = THIS_MODULE,
 	.mmap  = bsr_mmap,
 	.open  = bsr_open,
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 3d2565441b3..edb02530e46 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -42,9 +42,9 @@ config DEBUG_GPIO
 	depends on DEBUG_KERNEL
 	help
 	  Say Y here to add some extra checks and diagnostics to GPIO calls.
-	  The checks help ensure that GPIOs have been properly initialized
-	  before they are used and that sleeping calls aren not made from
-	  nonsleeping contexts.  They can make bitbanged serial protocols
+	  These checks help ensure that GPIOs have been properly initialized
+	  before they are used, and that sleeping calls are not made from
+	  non-sleeping contexts.  They can make bitbanged serial protocols
 	  slower.  The diagnostics help catch the type of setup errors
 	  that are most common when setting up new platforms or boards.
 
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index e85c8fe9ffc..504cfaa6160 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -243,7 +243,7 @@ config GREENASIA_FF
 	select INPUT_FF_MEMLESS
 	---help---
 	Say Y here if you have a GreenAsia (Product ID 0x12) based game controller
-	(like MANTA Warior MM816 and SpeedLink Strike2 SL-6635) or adapter
+	(like MANTA Warrior MM816 and SpeedLink Strike2 SL-6635) or adapter
 	and want to enable force feedback support for it.
 
 config HID_TOPSEED
diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index 18a1ba88816..e2107e533ed 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -1,7 +1,7 @@
 /*
  * f75375s.c - driver for the Fintek F75375/SP and F75373
  *             hardware monitoring features
- * Copyright (C) 2006-2007  Riku Voipio <riku.voipio@movial.fi>
+ * Copyright (C) 2006-2007  Riku Voipio
  *
  * Datasheets available at:
  *
@@ -721,7 +721,7 @@ static void __exit sensors_f75375_exit(void)
 	i2c_del_driver(&f75375_driver);
 }
 
-MODULE_AUTHOR("Riku Voipio <riku.voipio@movial.fi>");
+MODULE_AUTHOR("Riku Voipio");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("F75373/F75375 hardware monitoring driver");
 
diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index 5f9d860925a..cd50c00ab20 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -143,7 +143,7 @@ config INPUT_APMPOWER
 	---help---
 	  Say Y here if you want suspend key events to trigger a user
 	  requested suspend through APM. This is useful on embedded
-	  systems where such behviour is desired without userspace
+	  systems where such behaviour is desired without userspace
 	  interaction. If unsure, say N.
 
 	  To compile this driver as a module, choose M here: the
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 0db8d16c5ed..5e5eb88d8d1 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -18,7 +18,7 @@
 
 /*
  * Timer function which is run every scan_ms ms when the device is opened.
- * The dev input varaible is set to the the input_dev pointer.
+ * The dev input variable is set to the the input_dev pointer.
  */
 static void gpio_mouse_scan(struct input_polled_dev *dev)
 {
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 7c27c8b9b6d..056ac77e2cf 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -295,7 +295,7 @@ name ## _show(struct device *dev, struct device_attribute *attr, char *buf) \
 static DEVICE_ATTR(name, S_IRUGO, name ## _show, NULL);
 
 
-/* Sysfs conventions report temperatures in millidegrees Celcius.
+/* Sysfs conventions report temperatures in millidegrees Celsius.
  * ADS7846 could use the low-accuracy two-sample scheme, but can't do the high
  * accuracy scheme without calibration data.  For now we won't try either;
  * userspace sees raw sensor values, and must scale/calibrate appropriately.
diff --git a/drivers/isdn/mISDN/Kconfig b/drivers/isdn/mISDN/Kconfig
index 4938355c407..1747a02a019 100644
--- a/drivers/isdn/mISDN/Kconfig
+++ b/drivers/isdn/mISDN/Kconfig
@@ -14,13 +14,15 @@ config MISDN_DSP
 	depends on MISDN
 	help
 	  Enable support for digital audio processing capability.
+
 	  This module may be used for special applications that require
-	  cross connecting of bchannels, conferencing, dtmf decoding
+	  cross connecting of bchannels, conferencing, dtmf decoding,
 	  echo cancelation, tone generation, and Blowfish encryption and
-	  decryption.
-	  It may use hardware features if available.
+	  decryption. It may use hardware features if available.
+
 	  E.g. it is required for PBX4Linux. Go to http://isdn.eversberg.eu
-	  and get more informations about this module and it's usage.
+	  and get more information about this module and its usage.
+
 	  If unsure, say 'N'.
 
 config MISDN_L1OIP
diff --git a/drivers/isdn/mISDN/l1oip_codec.c b/drivers/isdn/mISDN/l1oip_codec.c
index 2ec4b28d9ed..e4ecba3d48d 100644
--- a/drivers/isdn/mISDN/l1oip_codec.c
+++ b/drivers/isdn/mISDN/l1oip_codec.c
@@ -331,7 +331,7 @@ l1oip_4bit_alloc(int ulaw)
 	/* alloc conversion tables */
 	table_com = vmalloc(65536);
 	table_dec = vmalloc(512);
-	if (!table_com | !table_dec) {
+	if (!table_com || !table_dec) {
 		l1oip_4bit_free();
 		return -ENOMEM;
 	}
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 556aeca0d86..d9db17624f1 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -100,7 +100,7 @@ config LEDS_HP6XX
 	tristate "LED Support for the HP Jornada 6xx"
 	depends on LEDS_CLASS && SH_HP6XX
 	help
-	  This option enables led support for the handheld
+	  This option enables LED support for the handheld
 	  HP Jornada 620/660/680/690.
 
 config LEDS_PCA9532
@@ -108,7 +108,7 @@ config LEDS_PCA9532
 	depends on LEDS_CLASS && I2C && INPUT && EXPERIMENTAL
 	help
 	  This option enables support for NXP pca9532
-	  led controller. It is generally only usefull
+	  LED controller. It is generally only useful
 	  as a platform driver
 
 config LEDS_GPIO
@@ -144,7 +144,7 @@ config LEDS_CLEVO_MAIL
 	  	Positivo Mobile (Clevo M5x0V)
 
 	  If your model is not listed here you can try the "nodetect"
-	  module paramter.
+	  module parameter.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called leds-clevo-mail.
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index 76ec7498e2d..bd3b431c971 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -1,7 +1,7 @@
 /*
  * pca9532.c - 16-bit Led dimmer
  *
- * Copyright (C) 2008 Riku Voipio <riku.voipio@movial.fi>
+ * Copyright (C) 2008 Riku Voipio
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -367,7 +367,7 @@ static void __exit pca9532_exit(void)
 	i2c_del_driver(&pca9532_driver);
 }
 
-MODULE_AUTHOR("Riku Voipio <riku.voipio@movial.fi>");
+MODULE_AUTHOR("Riku Voipio");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("PCA 9532 LED dimmer");
 
diff --git a/drivers/media/common/tuners/Kconfig b/drivers/media/common/tuners/Kconfig
index 52c3f65b12d..607d319ce8e 100644
--- a/drivers/media/common/tuners/Kconfig
+++ b/drivers/media/common/tuners/Kconfig
@@ -148,7 +148,7 @@ config MEDIA_TUNER_XC5000
 	default m if MEDIA_TUNER_CUSTOMISE
 	help
 	  A driver for the silicon tuner XC5000 from Xceive.
-	  This device is only used inside a SiP called togther with a
+	  This device is only used inside a SiP called together with a
 	  demodulator for now.
 
 config MEDIA_TUNER_MXL5005S
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index a206cee23f7..a486a7f81fa 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -479,7 +479,7 @@ config DVB_TUNER_DIB0070
 	default m if DVB_FE_CUSTOMISE
 	help
 	  A driver for the silicon baseband tuner DiB0070 from DiBcom.
-	  This device is only used inside a SiP called togther with a
+	  This device is only used inside a SiP called together with a
 	  demodulator for now.
 
 comment "SEC control devices for DVB-S"
diff --git a/drivers/media/dvb/frontends/drx397xD.c b/drivers/media/dvb/frontends/drx397xD.c
index 1e81e713df6..172f1f928f0 100644
--- a/drivers/media/dvb/frontends/drx397xD.c
+++ b/drivers/media/dvb/frontends/drx397xD.c
@@ -74,7 +74,7 @@ static struct {
 } fw[] = {
 #define _FW_ENTRY(a, b, c)	{					\
 			.name	= a,					\
-			.file	= 0,					\
+			.file	= NULL,					\
 			.lock	= __RW_LOCK_UNLOCKED(fw[c].lock),	\
 			.refcnt = 0,					\
 			.data	= { }		}
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 06a2b0f7737..75f35dbb11d 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -88,7 +88,7 @@ config MENELAUS
 	help
 	  If you say yes here you get support for the Texas Instruments
 	  TWL92330/Menelaus Power Management chip. This include voltage
-	  regulators, Dual slot memory card tranceivers, real-time clock
+	  regulators, Dual slot memory card transceivers, real-time clock
 	  and other features that are often used in portable devices like
 	  cell phones and PDAs.
 
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 0b92b2f6ea6..6d1ac180f6e 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -18,8 +18,8 @@ config ATMEL_PWM
 	depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9
 	help
 	  This option enables device driver support for the PWM channels
-	  on certain Atmel prcoessors.  Pulse Width Modulation is used for
-	  purposes including software controlled power-efficent backlights
+	  on certain Atmel processors.  Pulse Width Modulation is used for
+	  purposes including software controlled power-efficient backlights
 	  on LCD displays, motor control, and waveform generation.
 
 config ATMEL_TCLIB
@@ -142,7 +142,7 @@ config ATMEL_SSC
 	tristate "Device driver for Atmel SSC peripheral"
 	depends on AVR32 || ARCH_AT91
 	---help---
-	  This option enables device driver support for Atmel Syncronized
+	  This option enables device driver support for Atmel Synchronized
 	  Serial Communication peripheral (SSC).
 
 	  The SSC peripheral supports a wide variety of serial frame based
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 99d4b28d52e..6fbb246c40b 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -177,7 +177,7 @@ config MMC_SPI
 	select CRC7
 	select CRC_ITU_T
 	help
-	  Some systems accss MMC/SD/SDIO cards using a SPI controller
+	  Some systems access MMC/SD/SDIO cards using a SPI controller
 	  instead of using a "native" MMC/SD/SDIO controller.  This has a
 	  disadvantage of being relatively high overhead, but a compensating
 	  advantage of working on many systems without dedicated MMC/SD/SDIO
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index e4226e02d63..e51c1ed7ac1 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -1773,4 +1773,4 @@ module_exit(cleanup_nanddoc);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
-MODULE_DESCRIPTION("M-Systems DiskOnChip 2000, Millennium and Millennium Plus device driver\n");
+MODULE_DESCRIPTION("M-Systems DiskOnChip 2000, Millennium and Millennium Plus device driver");
diff --git a/drivers/mtd/tests/mtd_oobtest.c b/drivers/mtd/tests/mtd_oobtest.c
index afbc3f8126d..a18e8d2f255 100644
--- a/drivers/mtd/tests/mtd_oobtest.c
+++ b/drivers/mtd/tests/mtd_oobtest.c
@@ -136,7 +136,7 @@ static int write_eraseblock(int ebnum)
 		ops.ooblen    = use_len;
 		ops.oobretlen = 0;
 		ops.ooboffs   = use_offset;
-		ops.datbuf    = 0;
+		ops.datbuf    = NULL;
 		ops.oobbuf    = writebuf;
 		err = mtd->write_oob(mtd, addr, &ops);
 		if (err || ops.oobretlen != use_len) {
@@ -189,7 +189,7 @@ static int verify_eraseblock(int ebnum)
 		ops.ooblen    = use_len;
 		ops.oobretlen = 0;
 		ops.ooboffs   = use_offset;
-		ops.datbuf    = 0;
+		ops.datbuf    = NULL;
 		ops.oobbuf    = readbuf;
 		err = mtd->read_oob(mtd, addr, &ops);
 		if (err || ops.oobretlen != use_len) {
@@ -216,7 +216,7 @@ static int verify_eraseblock(int ebnum)
 			ops.ooblen    = mtd->ecclayout->oobavail;
 			ops.oobretlen = 0;
 			ops.ooboffs   = 0;
-			ops.datbuf    = 0;
+			ops.datbuf    = NULL;
 			ops.oobbuf    = readbuf;
 			err = mtd->read_oob(mtd, addr, &ops);
 			if (err || ops.oobretlen != mtd->ecclayout->oobavail) {
@@ -281,7 +281,7 @@ static int verify_eraseblock_in_one_go(int ebnum)
 	ops.ooblen    = len;
 	ops.oobretlen = 0;
 	ops.ooboffs   = 0;
-	ops.datbuf    = 0;
+	ops.datbuf    = NULL;
 	ops.oobbuf    = readbuf;
 	err = mtd->read_oob(mtd, addr, &ops);
 	if (err || ops.oobretlen != len) {
@@ -522,7 +522,7 @@ static int __init mtd_oobtest_init(void)
 	ops.ooblen    = 1;
 	ops.oobretlen = 0;
 	ops.ooboffs   = mtd->ecclayout->oobavail;
-	ops.datbuf    = 0;
+	ops.datbuf    = NULL;
 	ops.oobbuf    = writebuf;
 	printk(PRINT_PREF "attempting to start write past end of OOB\n");
 	printk(PRINT_PREF "an error is expected...\n");
@@ -542,7 +542,7 @@ static int __init mtd_oobtest_init(void)
 	ops.ooblen    = 1;
 	ops.oobretlen = 0;
 	ops.ooboffs   = mtd->ecclayout->oobavail;
-	ops.datbuf    = 0;
+	ops.datbuf    = NULL;
 	ops.oobbuf    = readbuf;
 	printk(PRINT_PREF "attempting to start read past end of OOB\n");
 	printk(PRINT_PREF "an error is expected...\n");
@@ -566,7 +566,7 @@ static int __init mtd_oobtest_init(void)
 		ops.ooblen    = mtd->ecclayout->oobavail + 1;
 		ops.oobretlen = 0;
 		ops.ooboffs   = 0;
-		ops.datbuf    = 0;
+		ops.datbuf    = NULL;
 		ops.oobbuf    = writebuf;
 		printk(PRINT_PREF "attempting to write past end of device\n");
 		printk(PRINT_PREF "an error is expected...\n");
@@ -586,7 +586,7 @@ static int __init mtd_oobtest_init(void)
 		ops.ooblen    = mtd->ecclayout->oobavail + 1;
 		ops.oobretlen = 0;
 		ops.ooboffs   = 0;
-		ops.datbuf    = 0;
+		ops.datbuf    = NULL;
 		ops.oobbuf    = readbuf;
 		printk(PRINT_PREF "attempting to read past end of device\n");
 		printk(PRINT_PREF "an error is expected...\n");
@@ -610,7 +610,7 @@ static int __init mtd_oobtest_init(void)
 		ops.ooblen    = mtd->ecclayout->oobavail;
 		ops.oobretlen = 0;
 		ops.ooboffs   = 1;
-		ops.datbuf    = 0;
+		ops.datbuf    = NULL;
 		ops.oobbuf    = writebuf;
 		printk(PRINT_PREF "attempting to write past end of device\n");
 		printk(PRINT_PREF "an error is expected...\n");
@@ -630,7 +630,7 @@ static int __init mtd_oobtest_init(void)
 		ops.ooblen    = mtd->ecclayout->oobavail;
 		ops.oobretlen = 0;
 		ops.ooboffs   = 1;
-		ops.datbuf    = 0;
+		ops.datbuf    = NULL;
 		ops.oobbuf    = readbuf;
 		printk(PRINT_PREF "attempting to read past end of device\n");
 		printk(PRINT_PREF "an error is expected...\n");
@@ -670,7 +670,7 @@ static int __init mtd_oobtest_init(void)
 			ops.ooblen    = sz;
 			ops.oobretlen = 0;
 			ops.ooboffs   = 0;
-			ops.datbuf    = 0;
+			ops.datbuf    = NULL;
 			ops.oobbuf    = writebuf;
 			err = mtd->write_oob(mtd, addr, &ops);
 			if (err)
@@ -698,7 +698,7 @@ static int __init mtd_oobtest_init(void)
 		ops.ooblen    = mtd->ecclayout->oobavail * 2;
 		ops.oobretlen = 0;
 		ops.ooboffs   = 0;
-		ops.datbuf    = 0;
+		ops.datbuf    = NULL;
 		ops.oobbuf    = readbuf;
 		err = mtd->read_oob(mtd, addr, &ops);
 		if (err)
diff --git a/drivers/mtd/tests/mtd_readtest.c b/drivers/mtd/tests/mtd_readtest.c
index 645e77fdc63..79fc4530987 100644
--- a/drivers/mtd/tests/mtd_readtest.c
+++ b/drivers/mtd/tests/mtd_readtest.c
@@ -71,7 +71,7 @@ static int read_eraseblock_by_page(int ebnum)
 			ops.ooblen    = mtd->oobsize;
 			ops.oobretlen = 0;
 			ops.ooboffs   = 0;
-			ops.datbuf    = 0;
+			ops.datbuf    = NULL;
 			ops.oobbuf    = oobbuf;
 			ret = mtd->read_oob(mtd, addr, &ops);
 			if (ret || ops.oobretlen != mtd->oobsize) {
diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c
index 88dd2e09832..ce7551e17ba 100644
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/sb1250-mac.c
@@ -2299,7 +2299,7 @@ static int sbmac_init(struct platform_device *pldev, long long base)
 	eaddr = sc->sbm_hwaddr;
 
 	/*
-	 * Read the ethernet address.  The firwmare left this programmed
+	 * Read the ethernet address.  The firmware left this programmed
 	 * for us in the ethernet address register for each mac.
 	 */
 
diff --git a/drivers/net/skfp/h/hwmtm.h b/drivers/net/skfp/h/hwmtm.h
index 1a606d4bfe5..e1a7e5f683d 100644
--- a/drivers/net/skfp/h/hwmtm.h
+++ b/drivers/net/skfp/h/hwmtm.h
@@ -145,7 +145,7 @@ struct hw_modul {
 	int	leave_isr ;		/* leave fddi_isr immedeately if set */
 	int	isr_flag ;		/* set, when HWM is entered from isr */
 	/*
-	 * varaibles for the current transmit frame
+	 * variables for the current transmit frame
 	 */
 	struct s_smt_tx_queue *tx_p ;	/* pointer to the transmit queue */
 	u_long	tx_descr ;		/* tx descriptor for FORMAC+ */
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 1205c2a2265..437683aab32 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -11225,7 +11225,7 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
 		return tg3_phy_init(tp);
 
 	/* Reading the PHY ID register can conflict with ASF
-	 * firwmare access to the PHY hardware.
+	 * firmware access to the PHY hardware.
 	 */
 	err = 0;
 	if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) ||
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c
index 00945f7c1e9..25c9ef6a181 100644
--- a/drivers/net/wan/farsync.c
+++ b/drivers/net/wan/farsync.c
@@ -69,7 +69,7 @@ MODULE_LICENSE("GPL");
 #endif
 
 /*
- * Modules parameters and associated varaibles
+ * Modules parameters and associated variables
  */
 static int fst_txq_low = FST_LOW_WATER_MARK;
 static int fst_txq_high = FST_HIGH_WATER_MARK;
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 115b7048750..f4e963ba768 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -2362,7 +2362,7 @@ static void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i)
 		       i * sizeof(struct ipw2100_status));
 
 #ifdef IPW2100_DEBUG_C3
-	/* Halt the fimrware so we can get a good image */
+	/* Halt the firmware so we can get a good image */
 	write_register(priv->net_dev, IPW_REG_RESET_REG,
 		       IPW_AUX_HOST_RESET_REG_STOP_MASTER);
 	j = 5;
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 4a92af1d787..e17a4593e1f 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -8844,7 +8844,7 @@ static int ipw_wx_set_mode(struct net_device *dev,
 #endif				/* CONFIG_IPW2200_MONITOR */