Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (42 commits)
  b44: Fix wedge when using netconsole.
  wan: cosa: drop chan->wsem on error path
  ep93xx-eth: check for zero MAC address on probe, not on device open
  NET: smc91x: Fix irq flags
  smsc9420: prevent BUG() if ethtool is called with interface down
  r8169: restore mac addr in rtl8169_remove_one and rtl_shutdown
  ipv4: additional update of dev_net(dev) to struct *net in ip_fragment.c, NULL ptr OOPS
  e100: Use pci pool to work around GFP_ATOMIC order 5 memory allocation failure
  sctp: on T3_RTX retransmit all the in-flight chunks
  pktgen: Fix netdevice unregister
  macvlan: fix gso_max_size setting
  rfkill: fix miscdev ops
  ath9k: set ps_default as false
  hso: fix soft-lockup
  hso: fix debug routines
  pktgen: Fix device name compares
  stmmac: do not fail when the timer cannot be used.
  stmmac: fixed a compilation error when use the external timer
  netfilter: xt_limit: fix invalid return code in limit_mt_check()
  Au1x00: fix crash when trying register_netdev()
  ...

30 files changed, 303 insertions, 236 deletions

diff --git a/drivers/ieee802154/fakehard.c b/drivers/ieee802154/fakehard.c
index 96a2959ce87..7c544f7c74c 100644
--- a/drivers/ieee802154/fakehard.c
+++ b/drivers/ieee802154/fakehard.c
@@ -260,15 +260,12 @@ static int ieee802154_fake_close(struct net_device *dev)
 static netdev_tx_t ieee802154_fake_xmit(struct sk_buff *skb,
 					      struct net_device *dev)
 {
-	skb->iif = dev->ifindex;
-	skb->dev = dev;
 	dev->stats.tx_packets++;
 	dev->stats.tx_bytes += skb->len;
 
-	dev->trans_start = jiffies;
-
 	/* FIXME: do hardware work here ... */
 
+	dev_kfree_skb(skb);
 	return NETDEV_TX_OK;
 }
 
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index e19ca4bb751..b2f71f79baa 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -975,7 +975,7 @@ config ENC28J60_WRITEVERIFY
 
 config ETHOC
 	tristate "OpenCores 10/100 Mbps Ethernet MAC support"
-	depends on NET_ETHERNET && HAS_IOMEM
+	depends on NET_ETHERNET && HAS_IOMEM && HAS_DMA
 	select MII
 	select PHYLIB
 	select CRC32
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index 2be49c81799..b25467ac895 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -628,15 +628,6 @@ static int ep93xx_open(struct net_device *dev)
 	if (ep93xx_alloc_buffers(ep))
 		return -ENOMEM;
 
-	if (is_zero_ether_addr(dev->dev_addr)) {
-		random_ether_addr(dev->dev_addr);
-		printk(KERN_INFO "%s: generated random MAC address "
-			"%.2x:%.2x:%.2x:%.2x:%.2x:%.2x.\n", dev->name,
-			dev->dev_addr[0], dev->dev_addr[1],
-			dev->dev_addr[2], dev->dev_addr[3],
-			dev->dev_addr[4], dev->dev_addr[5]);
-	}
-
 	napi_enable(&ep->napi);
 
 	if (ep93xx_start_hw(dev)) {
@@ -877,6 +868,9 @@ static int ep93xx_eth_probe(struct platform_device *pdev)
 	ep->mii.mdio_write = ep93xx_mdio_write;
 	ep->mdc_divisor = 40;	/* Max HCLK 100 MHz, min MDIO clk 2.5 MHz.  */
 
+	if (is_zero_ether_addr(dev->dev_addr))
+		random_ether_addr(dev->dev_addr);
+
 	err = register_netdev(dev);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to register netdev\n");
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index ce6f1ac25df..3f4b4300f53 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -1088,7 +1088,14 @@ static struct net_device * au1000_probe(int port_num)
 		return NULL;
 	}
 
-	if ((err = register_netdev(dev)) != 0) {
+	dev->base_addr = base;
+	dev->irq = irq;
+	dev->netdev_ops = &au1000_netdev_ops;
+	SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops);
+	dev->watchdog_timeo = ETH_TX_TIMEOUT;
+
+	err = register_netdev(dev);
+	if (err != 0) {
 		printk(KERN_ERR "%s: Cannot register net device, error %d\n",
 				DRV_NAME, err);
 		free_netdev(dev);
@@ -1209,12 +1216,6 @@ static struct net_device * au1000_probe(int port_num)
 		aup->tx_db_inuse[i] = pDB;
 	}
 
-	dev->base_addr = base;
-	dev->irq = irq;
-	dev->netdev_ops = &au1000_netdev_ops;
-	SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops);
-	dev->watchdog_timeo = ETH_TX_TIMEOUT;
-
 	/*
 	 * The boot code uses the ethernet controller, so reset it to start
 	 * fresh.  au1000_init() expects that the device is in reset state.
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index e046943ef29..2a9132343b6 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -912,9 +912,6 @@ static irqreturn_t b44_interrupt(int irq, void *dev_id)
 			bp->istat = istat;
 			__b44_disable_ints(bp);
 			__napi_schedule(&bp->napi);
-		} else {
-			printk(KERN_ERR PFX "%s: Error, poll already scheduled\n",
-			       dev->name);
 		}
 
 irq_ack:
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index db638037947..e3478314c00 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -164,16 +164,14 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
 # define EMAC_MBP_MCASTCHAN(ch)		((ch) & 0x7)
 
 /* EMAC mac_control register */
-#define EMAC_MACCONTROL_TXPTYPE		(0x200)
-#define EMAC_MACCONTROL_TXPACEEN	(0x40)
-#define EMAC_MACCONTROL_MIIEN		(0x20)
-#define EMAC_MACCONTROL_GIGABITEN	(0x80)
-#define EMAC_MACCONTROL_GIGABITEN_SHIFT (7)
-#define EMAC_MACCONTROL_FULLDUPLEXEN	(0x1)
+#define EMAC_MACCONTROL_TXPTYPE		BIT(9)
+#define EMAC_MACCONTROL_TXPACEEN	BIT(6)
+#define EMAC_MACCONTROL_GMIIEN		BIT(5)
+#define EMAC_MACCONTROL_GIGABITEN	BIT(7)
+#define EMAC_MACCONTROL_FULLDUPLEXEN	BIT(0)
 #define EMAC_MACCONTROL_RMIISPEED_MASK	BIT(15)
 
 /* GIGABIT MODE related bits */
-#define EMAC_DM646X_MACCONTORL_GMIIEN	BIT(5)
 #define EMAC_DM646X_MACCONTORL_GIG	BIT(7)
 #define EMAC_DM646X_MACCONTORL_GIGFORCE	BIT(17)
 
@@ -192,10 +190,10 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
 #define EMAC_RX_BUFFER_OFFSET_MASK	(0xFFFF)
 
 /* MAC_IN_VECTOR (0x180) register bit fields */
-#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT	      (0x20000)
-#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT	      (0x10000)
-#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC	      (0x0100)
-#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC	      (0x01)
+#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT	BIT(17)
+#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT	BIT(16)
+#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC	BIT(8)
+#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC	BIT(0)
 
 /** NOTE:: For DM646x the IN_VECTOR has changed */
 #define EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC	BIT(EMAC_DEF_RX_CH)
@@ -203,7 +201,6 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
 #define EMAC_DM646X_MAC_IN_VECTOR_HOST_INT	BIT(26)
 #define EMAC_DM646X_MAC_IN_VECTOR_STATPEND_INT	BIT(27)
 
-
 /* CPPI bit positions */
 #define EMAC_CPPI_SOP_BIT		BIT(31)
 #define EMAC_CPPI_EOP_BIT		BIT(30)
@@ -750,8 +747,7 @@ static void emac_update_phystatus(struct emac_priv *priv)
 
 	if (priv->speed == SPEED_1000 && (priv->version == EMAC_VERSION_2)) {
 		mac_control = emac_read(EMAC_MACCONTROL);
-		mac_control |= (EMAC_DM646X_MACCONTORL_GMIIEN |
-				EMAC_DM646X_MACCONTORL_GIG |
+		mac_control |= (EMAC_DM646X_MACCONTORL_GIG |
 				EMAC_DM646X_MACCONTORL_GIGFORCE);
 	} else {
 		/* Clear the GIG bit and GIGFORCE bit */
@@ -2108,7 +2104,7 @@ static int emac_hw_enable(struct emac_priv *priv)
 
 	/* Enable MII */
 	val = emac_read(EMAC_MACCONTROL);
-	val |= (EMAC_MACCONTROL_MIIEN);
+	val |= (EMAC_MACCONTROL_GMIIEN);
 	emac_write(EMAC_MACCONTROL, val);
 
 	/* Enable NAPI and interrupts */
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 3c29a20b751..d269a68ce35 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -157,6 +157,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/mii.h>
@@ -602,6 +603,7 @@ struct nic {
 	struct mem *mem;
 	dma_addr_t dma_addr;
 
+	struct pci_pool *cbs_pool;
 	dma_addr_t cbs_dma_addr;
 	u8 adaptive_ifs;
 	u8 tx_threshold;
@@ -1793,9 +1795,7 @@ static void e100_clean_cbs(struct nic *nic)
 			nic->cb_to_clean = nic->cb_to_clean->next;
 			nic->cbs_avail++;
 		}
-		pci_free_consistent(nic->pdev,
-			sizeof(struct cb) * nic->params.cbs.count,
-			nic->cbs, nic->cbs_dma_addr);
+		pci_pool_free(nic->cbs_pool, nic->cbs, nic->cbs_dma_addr);
 		nic->cbs = NULL;
 		nic->cbs_avail = 0;
 	}
@@ -1813,8 +1813,8 @@ static int e100_alloc_cbs(struct nic *nic)
 	nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = NULL;
 	nic->cbs_avail = 0;
 
-	nic->cbs = pci_alloc_consistent(nic->pdev,
-		sizeof(struct cb) * count, &nic->cbs_dma_addr);
+	nic->cbs = pci_pool_alloc(nic->cbs_pool, GFP_KERNEL,
+				  &nic->cbs_dma_addr);
 	if (!nic->cbs)
 		return -ENOMEM;
 
@@ -2841,7 +2841,11 @@ static int __devinit e100_probe(struct pci_dev *pdev,
 		DPRINTK(PROBE, ERR, "Cannot register net device, aborting.\n");
 		goto err_out_free;
 	}
-
+	nic->cbs_pool = pci_pool_create(netdev->name,
+			   nic->pdev,
+			   nic->params.cbs.count * sizeof(struct cb),
+			   sizeof(u32),
+			   0);
 	DPRINTK(PROBE, INFO, "addr 0x%llx, irq %d, MAC addr %pM\n",
 		(unsigned long long)pci_resource_start(pdev, use_io ? 1 : 0),
 		pdev->irq, netdev->dev_addr);
@@ -2871,6 +2875,7 @@ static void __devexit e100_remove(struct pci_dev *pdev)
 		unregister_netdev(netdev);
 		e100_free(nic);
 		pci_iounmap(pdev, nic->csr);
+		pci_pool_destroy(nic->cbs_pool);
 		free_netdev(netdev);
 		pci_release_regions(pdev);
 		pci_disable_device(pdev);
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 189dfa2d6c7..3e187b0e420 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -141,6 +141,8 @@ struct e1000_info;
 #define HV_TNCRS_UPPER		PHY_REG(778, 29) /* Transmit with no CRS */
 #define HV_TNCRS_LOWER		PHY_REG(778, 30)
 
+#define E1000_FCRTV_PCH     0x05F40 /* PCH Flow Control Refresh Timer Value */
+
 /* BM PHY Copper Specific Status */
 #define BM_CS_STATUS                      17
 #define BM_CS_STATUS_LINK_UP              0x0400
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 1bf4d2a5d34..e82638ecae8 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -327,10 +327,18 @@ static int e1000_set_pauseparam(struct net_device *netdev,
 
 		hw->fc.current_mode = hw->fc.requested_mode;
 
-		retval = ((hw->phy.media_type == e1000_media_type_fiber) ?
-			  hw->mac.ops.setup_link(hw) : e1000e_force_mac_fc(hw));
+		if (hw->phy.media_type == e1000_media_type_fiber) {
+			retval = hw->mac.ops.setup_link(hw);
+			/* implicit goto out */
+		} else {
+			retval = e1000e_force_mac_fc(hw);
+			if (retval)
+				goto out;
+			e1000e_set_fc_watermarks(hw);
+		}
 	}
 
+out:
 	clear_bit(__E1000_RESETTING, &adapter->state);
 	return retval;
 }
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 51ddb04ab19..eff3f478365 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -1118,7 +1118,8 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
 			oem_reg |= HV_OEM_BITS_LPLU;
 	}
 	/* Restart auto-neg to activate the bits */
-	oem_reg |= HV_OEM_BITS_RESTART_AN;
+	if (!e1000_check_reset_block(hw))
+		oem_reg |= HV_OEM_BITS_RESTART_AN;
 	ret_val = hw->phy.ops.write_phy_reg_locked(hw, HV_OEM_BITS, oem_reg);
 
 out:
@@ -3558,6 +3559,7 @@ struct e1000_info e1000_pch_info = {
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_FLASH
 				  | FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_DISABLE_FC_PAUSE_TIME /* errata */
 				  | FLAG_APME_IN_WUC,
 	.pba			= 26,
 	.max_hw_frame_size	= 4096,
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 0687c6aa4e4..fad8f9ea004 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -2769,25 +2769,38 @@ void e1000e_reset(struct e1000_adapter *adapter)
 	/*
 	 * flow control settings
 	 *
-	 * The high water mark must be low enough to fit two full frame
+	 * The high water mark must be low enough to fit one full frame
 	 * (or the size used for early receive) above it in the Rx FIFO.
 	 * Set it to the lower of:
 	 * - 90% of the Rx FIFO size, and
 	 * - the full Rx FIFO size minus the early receive size (for parts
 	 *   with ERT support assuming ERT set to E1000_ERT_2048), or
-	 * - the full Rx FIFO size minus two full frames
+	 * - the full Rx FIFO size minus one full frame
 	 */
-	if ((adapter->flags & FLAG_HAS_ERT) &&
-	    (adapter->netdev->mtu > ETH_DATA_LEN))
-		hwm = min(((pba << 10) * 9 / 10),
-			  ((pba << 10) - (E1000_ERT_2048 << 3)));
-	else
-		hwm = min(((pba << 10) * 9 / 10),
-			  ((pba << 10) - (2 * adapter->max_frame_size)));
+	if (hw->mac.type == e1000_pchlan) {
+		/*
+		 * Workaround PCH LOM adapter hangs with certain network
+		 * loads.  If hangs persist, try disabling Tx flow control.
+		 */
+		if (adapter->netdev->mtu > ETH_DATA_LEN) {
+			fc->high_water = 0x3500;
+			fc->low_water  = 0x1500;
+		} else {
+			fc->high_water = 0x5000;
+			fc->low_water  = 0x3000;
+		}
+	} else {
+		if ((adapter->flags & FLAG_HAS_ERT) &&
+		    (adapter->netdev->mtu > ETH_DATA_LEN))
+			hwm = min(((pba << 10) * 9 / 10),
+				  ((pba << 10) - (E1000_ERT_2048 << 3)));
+		else
+			hwm = min(((pba << 10) * 9 / 10),
+				  ((pba << 10) - adapter->max_frame_size));
 
-	fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
-	fc->low_water = (fc->high_water - (2 * adapter->max_frame_size));
-	fc->low_water &= E1000_FCRTL_RTL; /* 8-byte granularity */
+		fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
+		fc->low_water = fc->high_water - 8;
+	}
 
 	if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
 		fc->pause_time = 0xFFFF;
@@ -2813,6 +2826,10 @@ void e1000e_reset(struct e1000_adapter *adapter)
 	if (mac->ops.init_hw(hw))
 		e_err("Hardware Error\n");
 
+	/* additional part of the flow-control workaround above */
+	if (hw->mac.type == e1000_pchlan)
+		ew32(FCRTV_PCH, 0x1000);
+
 	e1000_update_mng_vlan(adapter);
 
 	/* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
@@ -3610,7 +3627,7 @@ static void e1000_watchdog_task(struct work_struct *work)
 			case SPEED_100:
 				txb2b = 0;
 				netdev->tx_queue_len = 100;
-				/* maybe add some timeout factor ? */
+				adapter->tx_timeout_factor = 10;
 				break;
 			}
 
@@ -4288,8 +4305,10 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 
 	while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
 		msleep(1);
-	/* e1000e_down has a dependency on max_frame_size */
+	/* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */
 	adapter->max_frame_size = max_frame;
+	e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
+	netdev->mtu = new_mtu;
 	if (netif_running(netdev))
 		e1000e_down(adapter);
 
@@ -4319,9 +4338,6 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 		adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
 					 + ETH_FCS_LEN;
 
-	e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
-	netdev->mtu = new_mtu;
-
 	if (netif_running(netdev))
 		e1000e_up(adapter);
 	else
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 03175b3a2c9..85f955f7041 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -71,7 +71,6 @@ static const u16 e1000_igp_2_cable_length_table[] =
 #define I82577_CFG_ASSERT_CRS_ON_TX       (1 << 15)
 #define I82577_CFG_ENABLE_DOWNSHIFT       (3 << 10) /* auto downshift 100/10 */
 #define I82577_CTRL_REG                   23
-#define I82577_CTRL_DOWNSHIFT_MASK        (7 << 10)
 
 /* 82577 specific PHY registers */
 #define I82577_PHY_CTRL_2            18
@@ -660,15 +659,6 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
 	phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
 
 	ret_val = phy->ops.write_phy_reg(hw, I82577_CFG_REG, phy_data);
-	if (ret_val)
-		goto out;
-
-	/* Set number of link attempts before downshift */
-	ret_val = phy->ops.read_phy_reg(hw, I82577_CTRL_REG, &phy_data);
-	if (ret_val)
-		goto out;
-	phy_data &= ~I82577_CTRL_DOWNSHIFT_MASK;
-	ret_val = phy->ops.write_phy_reg(hw, I82577_CTRL_REG, phy_data);
 
 out:
 	return ret_val;
@@ -2658,19 +2648,18 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
 		page = 0;
 
 	if (reg > MAX_PHY_MULTI_PAGE_REG) {
-		if ((hw->phy.type != e1000_phy_82578) ||
-		    ((reg != I82578_ADDR_REG) &&
-		     (reg != I82578_ADDR_REG + 1))) {
-			u32 phy_addr = hw->phy.addr;
+		u32 phy_addr = hw->phy.addr;
 
-			hw->phy.addr = 1;
+		hw->phy.addr = 1;
 
-			/* Page is shifted left, PHY expects (page x 32) */
-			ret_val = e1000e_write_phy_reg_mdic(hw,
-			                             IGP01E1000_PHY_PAGE_SELECT,
-			                             (page << IGP_PAGE_SHIFT));
-			hw->phy.addr = phy_addr;
-		}
+		/* Page is shifted left, PHY expects (page x 32) */
+		ret_val = e1000e_write_phy_reg_mdic(hw,
+					     IGP01E1000_PHY_PAGE_SELECT,
+					     (page << IGP_PAGE_SHIFT));
+		hw->phy.addr = phy_addr;
+
+		if (ret_val)
+			goto out;
 	}
 
 	ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
@@ -2678,7 +2667,7 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
 out:
 	/* Revert to MDIO fast mode, if applicable */
 	if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
-		ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+		ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
 
 	if (!locked)
 		hw->phy.ops.release_phy(hw);
@@ -2784,19 +2773,18 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
 	}
 
 	if (reg > MAX_PHY_MULTI_PAGE_REG) {
-		if ((hw->phy.type != e1000_phy_82578) ||
-		    ((reg != I82578_ADDR_REG) &&
-		     (reg != I82578_ADDR_REG + 1))) {
-			u32 phy_addr = hw->phy.addr;
+		u32 phy_addr = hw->phy.addr;
 
-			hw->phy.addr = 1;
+		hw->phy.addr = 1;
 
-			/* Page is shifted left, PHY expects (page x 32) */
-			ret_val = e1000e_write_phy_reg_mdic(hw,
-			                             IGP01E1000_PHY_PAGE_SELECT,
-			                             (page << IGP_PAGE_SHIFT));
-			hw->phy.addr = phy_addr;
-		}
+		/* Page is shifted left, PHY expects (page x 32) */
+		ret_val = e1000e_write_phy_reg_mdic(hw,
+					     IGP01E1000_PHY_PAGE_SELECT,
+					     (page << IGP_PAGE_SHIFT));
+		hw->phy.addr = phy_addr;
+
+		if (ret_val)
+			goto out;
 	}
 
 	ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
@@ -2805,7 +2793,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
 out:
 	/* Revert to MDIO fast mode, if applicable */
 	if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
-		ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+		ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
 
 	if (!locked)
 		hw->phy.ops.release_phy(hw);
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index a5036f7c192..a456578b857 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -240,11 +240,11 @@ static void ixgbe_unmap_and_free_tx_resource(struct ixgbe_adapter *adapter,
 static inline bool ixgbe_tx_is_paused(struct ixgbe_adapter *adapter,
                                       struct ixgbe_ring *tx_ring)
 {
-	int tc;
 	u32 txoff = IXGBE_TFCS_TXOFF;
 
 #ifdef CONFIG_IXGBE_DCB
 	if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+		int tc;
 		int reg_idx = tx_ring->reg_idx;
 		int dcb_i = adapter->ring_feature[RING_F_DCB].indices;
 
diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c
index 0be14d702be..c146304d8d6 100644
--- a/drivers/net/ks8851_mll.c
+++ b/drivers/net/ks8851_mll.c
@@ -568,6 +568,16 @@ static inline void ks_outblk(struct ks_net *ks, u16 *wptr, u32 len)
 		iowrite16(*wptr++, ks->hw_addr);
 }
 
+static void ks_disable_int(struct ks_net *ks)
+{
+	ks_wrreg16(ks, KS_IER, 0x0000);
+}  /* ks_disable_int */
+
+static void ks_enable_int(struct ks_net *ks)
+{
+	ks_wrreg16(ks, KS_IER, ks->rc_ier);
+}  /* ks_enable_int */
+
 /**
  * ks_tx_fifo_space - return the available hardware buffer size.
  * @ks: The chip information
@@ -681,6 +691,47 @@ static void ks_soft_reset(struct ks_net *ks, unsigned op)
 }
 
 
+void ks_enable_qmu(struct ks_net *ks)
+{
+	u16 w;
+
+	w = ks_rdreg16(ks, KS_TXCR);
+	/* Enables QMU Transmit (TXCR). */
+	ks_wrreg16(ks, KS_TXCR, w | TXCR_TXE);
+
+	/*
+	 * RX Frame Count Threshold Enable and Auto-Dequeue RXQ Frame
+	 * Enable
+	 */
+
+	w = ks_rdreg16(ks, KS_RXQCR);
+	ks_wrreg16(ks, KS_RXQCR, w | RXQCR_RXFCTE);
+
+	/* Enables QMU Receive (RXCR1). */
+	w = ks_rdreg16(ks, KS_RXCR1);
+	ks_wrreg16(ks, KS_RXCR1, w | RXCR1_RXE);
+	ks->enabled = true;
+}  /* ks_enable_qmu */
+
+static void ks_disable_qmu(struct ks_net *ks)
+{
+	u16	w;
+
+	w = ks_rdreg16(ks, KS_TXCR);
+
+	/* Disables QMU Transmit (TXCR). */
+	w  &= ~TXCR_TXE;
+	ks_wrreg16(ks, KS_TXCR, w);
+
+	/* Disables QMU Receive (RXCR1). */
+	w = ks_rdreg16(ks, KS_RXCR1);
+	w &= ~RXCR1_RXE ;
+	ks_wrreg16(ks, KS_RXCR1, w);
+
+	ks->enabled = false;
+
+}  /* ks_disable_qmu */
+
 /**
  * ks_read_qmu - read 1 pkt data from the QMU.
  * @ks: The chip information
@@ -752,7 +803,7 @@ static void ks_rcv(struct ks_net *ks, struct net_device *netdev)
 			(frame_hdr->len < RX_BUF_SIZE) && frame_hdr->len)) {
 			skb_reserve(skb, 2);
 			/* read data block including CRC 4 bytes */
-			ks_read_qmu(ks, (u16 *)skb->data, frame_hdr->len + 4);
+			ks_read_qmu(ks, (u16 *)skb->data, frame_hdr->len);
 			skb_put(skb, frame_hdr->len);
 			skb->dev = netdev;
 			skb->protocol = eth_type_trans(skb, netdev);
@@ -861,7 +912,7 @@ static int ks_net_open(struct net_device *netdev)
 		ks_dbg(ks, "%s - entry\n", __func__);
 
 	/* reset the HW */
-	err = request_irq(ks->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, ks);
+	err = request_irq(ks->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, netdev);
 
 	if (err) {
 		printk(KERN_ERR "Failed to request IRQ: %d: %d\n",
@@ -869,6 +920,15 @@ static int ks_net_open(struct net_device *netdev)
 		return err;
 	}
 
+	/* wake up powermode to normal mode */
+	ks_set_powermode(ks, PMECR_PM_NORMAL);
+	mdelay(1);	/* wait for normal mode to take effect */
+
+	ks_wrreg16(ks, KS_ISR, 0xffff);
+	ks_enable_int(ks);
+	ks_enable_qmu(ks);
+	netif_start_queue(ks->netdev);
+
 	if (netif_msg_ifup(ks))
 		ks_dbg(ks, "network device %s up\n", netdev->name);
 
@@ -892,19 +952,14 @@ static int ks_net_stop(struct net_device *netdev)
 
 	netif_stop_queue(netdev);
 
-	kfree(ks->frame_head_info);
-
 	mutex_lock(&ks->lock);
 
 	/* turn off the IRQs and ack any outstanding */
 	ks_wrreg16(ks, KS_IER, 0x0000);
 	ks_wrreg16(ks, KS_ISR, 0xffff);
 
-	/* shutdown RX process */
-	ks_wrreg16(ks, KS_RXCR1, 0x0000);
-
-	/* shutdown TX process */
-	ks_wrreg16(ks, KS_TXCR, 0x0000);
+	/* shutdown RX/TX QMU */
+	ks_disable_qmu(ks);
 
 	/* set powermode to soft power down to save power */
 	ks_set_powermode(ks, PMECR_PM_SOFTDOWN);
@@ -929,17 +984,8 @@ static int ks_net_stop(struct net_device *netdev)
  */
 static void ks_write_qmu(struct ks_net *ks, u8 *pdata, u16 len)
 {
-	unsigned fid = ks->fid;
-
-	fid = ks->fid;
-	ks->fid = (ks->fid + 1) & TXFR_TXFID_MASK;
-
-	/* reduce the tx interrupt occurrances. */
-	if (!fid)
-		fid |= TXFR_TXIC;       /* irq on completion */
-
 	/* start header at txb[0] to align txw entries */
-	ks->txh.txw[0] = cpu_to_le16(fid);
+	ks->txh.txw[0] = 0;
 	ks->txh.txw[1] = cpu_to_le16(len);
 
 	/* 1. set sudo-DMA mode */
@@ -957,16 +1003,6 @@ static void ks_write_qmu(struct ks_net *ks, u8 *pdata, u16 len)
 		;
 }
 
-static void ks_disable_int(struct ks_net *ks)
-{
-	ks_wrreg16(ks, KS_IER, 0x0000);
-}  /* ks_disable_int */
-
-static void ks_enable_int(struct ks_net *ks)
-{
-	ks_wrreg16(ks, KS_IER, ks->rc_ier);
-}  /* ks_enable_int */
-
 /**
  * ks_start_xmit - transmit packet
  * @skb		: The buffer to transmit
@@ -1410,25 +1446,6 @@ static int ks_read_selftest(struct ks_net *ks)
 	return ret;
 }
 
-static void ks_disable(struct ks_net *ks)
-{
-	u16	w;
-
-	w = ks_rdreg16(ks, KS_TXCR);
-
-	/* Disables QMU Transmit (TXCR). */
-	w  &= ~TXCR_TXE;
-	ks_wrreg16(ks, KS_TXCR, w);
-
-	/* Disables QMU Receive (RXCR1). */
-	w = ks_rdreg16(ks, KS_RXCR1);
-	w &= ~RXCR1_RXE ;
-	ks_wrreg16(ks, KS_RXCR1, w);
-
-	ks->enabled = false;
-
-}  /* ks_disable */
-
 static void ks_setup(struct ks_net *ks)
 {
 	u16	w;
@@ -1463,7 +1480,7 @@ static void ks_setup(struct ks_net *ks)
 	w = TXCR_TXFCE | TXCR_TXPE | TXCR_TXCRC | TXCR_TCGIP;
 	ks_wrreg16(ks, KS_TXCR, w);
 
-	w = RXCR1_RXFCE | RXCR1_RXBE | RXCR1_RXUE;
+	w = RXCR1_RXFCE | RXCR1_RXBE | RXCR1_RXUE | RXCR1_RXME | RXCR1_RXIPFCC;
 
 	if (ks->promiscuous)         /* bPromiscuous */
 		w |= (RXCR1_RXAE | RXCR1_RXINVF);
@@ -1486,28 +1503,6 @@ static void ks_setup_int(struct ks_net *ks)
 	ks->rc_ier = (IRQ_LCI | IRQ_TXI | IRQ_RXI);
 }  /* ks_setup_int */
 
-void ks_enable(struct ks_net *ks)
-{
-	u16 w;
-
-	w = ks_rdreg16(ks, KS_TXCR);
-	/* Enables QMU Transmit (TXCR). */
-	ks_wrreg16(ks, KS_TXCR, w | TXCR_TXE);
-
-	/*
-	 * RX Frame Count Threshold Enable and Auto-Dequeue RXQ Frame
-	 * Enable
-	 */
-
-	w = ks_rdreg16(ks, KS_RXQCR);
-	ks_wrreg16(ks, KS_RXQCR, w | RXQCR_RXFCTE);
-
-	/* Enables QMU Receive (RXCR1). */
-	w = ks_rdreg16(ks, KS_RXCR1);
-	ks_wrreg16(ks, KS_RXCR1, w | RXCR1_RXE);
-	ks->enabled = true;
-}  /* ks_enable */
-
 static int ks_hw_init(struct ks_net *ks)
 {
 #define	MHEADER_SIZE	(sizeof(struct type_frame_head) * MAX_RECV_FRAMES)
@@ -1612,11 +1607,9 @@ static int __devinit ks8851_probe(struct platform_device *pdev)
 
 	ks_soft_reset(ks, GRR_GSR);
 	ks_hw_init(ks);
-	ks_disable(ks);
+	ks_disable_qmu(ks);
 	ks_setup(ks);
 	ks_setup_int(ks);
-	ks_enable_int(ks);
-	ks_enable(ks);
 	memcpy(netdev->dev_addr, ks->mac_addr, 6);
 
 	data = ks_rdreg16(ks, KS_OBCR);
@@ -1658,6 +1651,7 @@ static int __devexit ks8851_remove(struct platform_device *pdev)
 	struct ks_net *ks = netdev_priv(netdev);
 	struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
+	kfree(ks->frame_head_info);
 	unregister_netdev(netdev);
 	iounmap(ks->hw_addr);
 	free_netdev(netdev);
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 3aabfd9dd21..2490aa39804 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -360,6 +360,7 @@ static int macvlan_init(struct net_device *dev)
 	dev->state		= (dev->state & ~MACVLAN_STATE_MASK) |