Merge remote branch 'origin/master' into merge

Manual merge of arch/powerpc/kernel/smp.c and add missing scheduler_ipi()
call to arch/powerpc/platforms/cell/interrupt.c

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

125 files changed, 15294 insertions, 1154 deletions

diff --git a/drivers/Kconfig b/drivers/Kconfig
index 177c7d15693..557a469c7aa 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -119,4 +119,7 @@ source "drivers/platform/Kconfig"
 source "drivers/clk/Kconfig"
 
 source "drivers/hwspinlock/Kconfig"
+
+source "drivers/clocksource/Kconfig"
+
 endmenu
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index 3a73a93596e..85b32376dad 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -49,10 +49,6 @@ ACPI_MODULE_NAME("processor_perflib");
 
 static DEFINE_MUTEX(performance_mutex);
 
-/* Use cpufreq debug layer for _PPC changes. */
-#define cpufreq_printk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, \
-						"cpufreq-core", msg)
-
 /*
  * _PPC support is implemented as a CPUfreq policy notifier:
  * This means each time a CPUfreq driver registered also with
@@ -145,7 +141,7 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
 		return -ENODEV;
 	}
 
-	cpufreq_printk("CPU %d: _PPC is %d - frequency %s limited\n", pr->id,
+	pr_debug("CPU %d: _PPC is %d - frequency %s limited\n", pr->id,
 		       (int)ppc, ppc ? "" : "not");
 
 	pr->performance_platform_limit = (int)ppc;
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index ad350173956..605a2954ef1 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -710,20 +710,14 @@ static int acpi_processor_get_throttling_fadt(struct acpi_processor *pr)
 }
 
 #ifdef CONFIG_X86
-static int acpi_throttling_rdmsr(struct acpi_processor *pr,
-					u64 *value)
+static int acpi_throttling_rdmsr(u64 *value)
 {
-	struct cpuinfo_x86 *c;
 	u64 msr_high, msr_low;
-	unsigned int cpu;
 	u64 msr = 0;
 	int ret = -1;
 
-	cpu = pr->id;
-	c = &cpu_data(cpu);
-
-	if ((c->x86_vendor != X86_VENDOR_INTEL) ||
-		!cpu_has(c, X86_FEATURE_ACPI)) {
+	if ((this_cpu_read(cpu_info.x86_vendor) != X86_VENDOR_INTEL) ||
+		!this_cpu_has(X86_FEATURE_ACPI)) {
 		printk(KERN_ERR PREFIX
 			"HARDWARE addr space,NOT supported yet\n");
 	} else {
@@ -738,18 +732,13 @@ static int acpi_throttling_rdmsr(struct acpi_processor *pr,
 	return ret;
 }
 
-static int acpi_throttling_wrmsr(struct acpi_processor *pr, u64 value)
+static int acpi_throttling_wrmsr(u64 value)
 {
-	struct cpuinfo_x86 *c;
-	unsigned int cpu;
 	int ret = -1;
 	u64 msr;
 
-	cpu = pr->id;
-	c = &cpu_data(cpu);
-
-	if ((c->x86_vendor != X86_VENDOR_INTEL) ||
-		!cpu_has(c, X86_FEATURE_ACPI)) {
+	if ((this_cpu_read(cpu_info.x86_vendor) != X86_VENDOR_INTEL) ||
+		!this_cpu_has(X86_FEATURE_ACPI)) {
 		printk(KERN_ERR PREFIX
 			"HARDWARE addr space,NOT supported yet\n");
 	} else {
@@ -761,15 +750,14 @@ static int acpi_throttling_wrmsr(struct acpi_processor *pr, u64 value)
 	return ret;
 }
 #else
-static int acpi_throttling_rdmsr(struct acpi_processor *pr,
-				u64 *value)
+static int acpi_throttling_rdmsr(u64 *value)
 {
 	printk(KERN_ERR PREFIX
 		"HARDWARE addr space,NOT supported yet\n");
 	return -1;
 }
 
-static int acpi_throttling_wrmsr(struct acpi_processor *pr, u64 value)
+static int acpi_throttling_wrmsr(u64 value)
 {
 	printk(KERN_ERR PREFIX
 		"HARDWARE addr space,NOT supported yet\n");
@@ -801,7 +789,7 @@ static int acpi_read_throttling_status(struct acpi_processor *pr,
 		ret = 0;
 		break;
 	case ACPI_ADR_SPACE_FIXED_HARDWARE:
-		ret = acpi_throttling_rdmsr(pr, value);
+		ret = acpi_throttling_rdmsr(value);
 		break;
 	default:
 		printk(KERN_ERR PREFIX "Unknown addr space %d\n",
@@ -834,7 +822,7 @@ static int acpi_write_throttling_state(struct acpi_processor *pr,
 		ret = 0;
 		break;
 	case ACPI_ADR_SPACE_FIXED_HARDWARE:
-		ret = acpi_throttling_wrmsr(pr, value);
+		ret = acpi_throttling_wrmsr(value);
 		break;
 	default:
 		printk(KERN_ERR PREFIX "Unknown addr space %d\n",
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index e9e5238f310..d57e8d0fb82 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -168,11 +168,4 @@ config SYS_HYPERVISOR
 	bool
 	default n
 
-config ARCH_NO_SYSDEV_OPS
-	bool
-	---help---
-	  To be selected by architectures that don't use sysdev class or
-	  sysdev driver power management (suspend/resume) and shutdown
-	  operations.
-
 endmenu
diff --git a/drivers/base/base.h b/drivers/base/base.h
index 19f49e41ce5..a34dca0ad04 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -111,8 +111,6 @@ static inline int driver_match_device(struct device_driver *drv,
 	return drv->bus->match ? drv->bus->match(dev, drv) : 1;
 }
 
-extern void sysdev_shutdown(void);
-
 extern char *make_class_name(const char *name, struct kobject *kobj);
 
 extern int devres_release_all(struct device *dev);
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 81b78ede37c..bc8729d603a 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -400,7 +400,7 @@ static void device_remove_groups(struct device *dev,
 static int device_add_attrs(struct device *dev)
 {
 	struct class *class = dev->class;
-	struct device_type *type = dev->type;
+	const struct device_type *type = dev->type;
 	int error;
 
 	if (class) {
@@ -440,7 +440,7 @@ static int device_add_attrs(struct device *dev)
 static void device_remove_attrs(struct device *dev)
 {
 	struct class *class = dev->class;
-	struct device_type *type = dev->type;
+	const struct device_type *type = dev->type;
 
 	device_remove_groups(dev, dev->groups);
 
@@ -1314,8 +1314,7 @@ EXPORT_SYMBOL_GPL(put_device);
 EXPORT_SYMBOL_GPL(device_create_file);
 EXPORT_SYMBOL_GPL(device_remove_file);
 
-struct root_device
-{
+struct root_device {
 	struct device dev;
 	struct module *owner;
 };
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index da57ee9d63f..6658da743c3 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -245,6 +245,10 @@ int device_attach(struct device *dev)
 
 	device_lock(dev);
 	if (dev->driver) {
+		if (klist_node_attached(&dev->p->knode_driver)) {
+			ret = 1;
+			goto out_unlock;
+		}
 		ret = device_bind_driver(dev);
 		if (ret == 0)
 			ret = 1;
@@ -257,6 +261,7 @@ int device_attach(struct device *dev)
 		ret = bus_for_each_drv(dev->bus, NULL, dev, __device_attach);
 		pm_runtime_put_sync(dev);
 	}
+out_unlock:
 	device_unlock(dev);
 	return ret;
 }
@@ -316,8 +321,7 @@ static void __device_release_driver(struct device *dev)
 
 	drv = dev->driver;
 	if (drv) {
-		pm_runtime_get_noresume(dev);
-		pm_runtime_barrier(dev);
+		pm_runtime_get_sync(dev);
 
 		driver_sysfs_remove(dev);
 
@@ -326,6 +330,8 @@ static void __device_release_driver(struct device *dev)
 						     BUS_NOTIFY_UNBIND_DRIVER,
 						     dev);
 
+		pm_runtime_put_sync(dev);
+
 		if (dev->bus && dev->bus->remove)
 			dev->bus->remove(dev);
 		else if (drv->remove)
@@ -338,7 +344,6 @@ static void __device_release_driver(struct device *dev)
 						     BUS_NOTIFY_UNBOUND_DRIVER,
 						     dev);
 
-		pm_runtime_put_sync(dev);
 	}
 }
 
@@ -408,17 +413,16 @@ void *dev_get_drvdata(const struct device *dev)
 }
 EXPORT_SYMBOL(dev_get_drvdata);
 
-void dev_set_drvdata(struct device *dev, void *data)
+int dev_set_drvdata(struct device *dev, void *data)
 {
 	int error;
 
-	if (!dev)
-		return;
 	if (!dev->p) {
 		error = device_private_init(dev);
 		if (error)
-			return;
+			return error;
 	}
 	dev->p->driver_data = data;
+	return 0;
 }
 EXPORT_SYMBOL(dev_set_drvdata);
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index 8c798ef7f13..bbb03e6f725 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -521,6 +521,11 @@ static int _request_firmware(const struct firmware **firmware_p,
 	if (!firmware_p)
 		return -EINVAL;
 
+	if (WARN_ON(usermodehelper_is_disabled())) {
+		dev_err(device, "firmware: %s will not be loaded\n", name);
+		return -EBUSY;
+	}
+
 	*firmware_p = firmware = kzalloc(sizeof(*firmware), GFP_KERNEL);
 	if (!firmware) {
 		dev_err(device, "%s: kmalloc(struct firmware) failed\n",
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index 3da6a43b775..0a134a424a3 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -48,7 +48,8 @@ static const char *memory_uevent_name(struct kset *kset, struct kobject *kobj)
 	return MEMORY_CLASS_NAME;
 }
 
-static int memory_uevent(struct kset *kset, struct kobject *obj, struct kobj_uevent_env *env)
+static int memory_uevent(struct kset *kset, struct kobject *obj,
+			struct kobj_uevent_env *env)
 {
 	int retval = 0;
 
@@ -228,10 +229,11 @@ int memory_isolate_notify(unsigned long val, void *v)
  * OK to have direct references to sparsemem variables in here.
  */
 static int
-memory_section_action(unsigned long phys_index, unsigned long action)
+memory_block_action(unsigned long phys_index, unsigned long action)
 {
 	int i;
 	unsigned long start_pfn, start_paddr;
+	unsigned long nr_pages = PAGES_PER_SECTION * sections_per_block;
 	struct page *first_page;
 	int ret;
 
@@ -243,7 +245,7 @@ memory_section_action(unsigned long phys_index, unsigned long action)
 	 * that way.
 	 */
 	if (action == MEM_ONLINE) {
-		for (i = 0; i < PAGES_PER_SECTION; i++) {
+		for (i = 0; i < nr_pages; i++) {
 			if (PageReserved(first_page+i))
 				continue;
 
@@ -257,12 +259,12 @@ memory_section_action(unsigned long phys_index, unsigned long action)
 	switch (action) {
 		case MEM_ONLINE:
 			start_pfn = page_to_pfn(first_page);
-			ret = online_pages(start_pfn, PAGES_PER_SECTION);
+			ret = online_pages(start_pfn, nr_pages);
 			break;
 		case MEM_OFFLINE:
 			start_paddr = page_to_pfn(first_page) << PAGE_SHIFT;
 			ret = remove_memory(start_paddr,
-					    PAGES_PER_SECTION << PAGE_SHIFT);
+					    nr_pages << PAGE_SHIFT);
 			break;
 		default:
 			WARN(1, KERN_WARNING "%s(%ld, %ld) unknown action: "
@@ -276,7 +278,7 @@ memory_section_action(unsigned long phys_index, unsigned long action)
 static int memory_block_change_state(struct memory_block *mem,
 		unsigned long to_state, unsigned long from_state_req)
 {
-	int i, ret = 0;
+	int ret = 0;
 
 	mutex_lock(&mem->state_mutex);
 
@@ -288,20 +290,11 @@ static int memory_block_change_state(struct memory_block *mem,
 	if (to_state == MEM_OFFLINE)
 		mem->state = MEM_GOING_OFFLINE;
 
-	for (i = 0; i < sections_per_block; i++) {
-		ret = memory_section_action(mem->start_section_nr + i,
-					    to_state);
-		if (ret)
-			break;
-	}
-
-	if (ret) {
-		for (i = 0; i < sections_per_block; i++)
-			memory_section_action(mem->start_section_nr + i,
-					      from_state_req);
+	ret = memory_block_action(mem->start_section_nr, to_state);
 
+	if (ret)
 		mem->state = from_state_req;
-	} else
+	else
 		mem->state = to_state;
 
 out:
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 9e0e4fc24c4..1c291af637b 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -192,18 +192,18 @@ EXPORT_SYMBOL_GPL(platform_device_alloc);
 int platform_device_add_resources(struct platform_device *pdev,
 				  const struct resource *res, unsigned int num)
 {
-	struct resource *r;
+	struct resource *r = NULL;
 
-	if (!res)
-		return 0;
-
-	r = kmemdup(res, sizeof(struct resource) * num, GFP_KERNEL);
-	if (r) {
-		pdev->resource = r;
-		pdev->num_resources = num;
-		return 0;
+	if (res) {
+		r = kmemdup(res, sizeof(struct resource) * num, GFP_KERNEL);
+		if (!r)
+			return -ENOMEM;
 	}
-	return -ENOMEM;
+
+	kfree(pdev->resource);
+	pdev->resource = r;
+	pdev->num_resources = num;
+	return 0;
 }
 EXPORT_SYMBOL_GPL(platform_device_add_resources);
 
@@ -220,17 +220,17 @@ EXPORT_SYMBOL_GPL(platform_device_add_resources);
 int platform_device_add_data(struct platform_device *pdev, const void *data,
 			     size_t size)
 {
-	void *d;
+	void *d = NULL;
 
-	if (!data)
-		return 0;
-
-	d = kmemdup(data, size, GFP_KERNEL);
-	if (d) {
-		pdev->dev.platform_data = d;
-		return 0;
+	if (data) {
+		d = kmemdup(data, size, GFP_KERNEL);
+		if (!d)
+			return -ENOMEM;
 	}
-	return -ENOMEM;
+
+	kfree(pdev->dev.platform_data);
+	pdev->dev.platform_data = d;
+	return 0;
 }
 EXPORT_SYMBOL_GPL(platform_device_add_data);
 
@@ -667,7 +667,7 @@ static int platform_legacy_resume(struct device *dev)
 	return ret;
 }
 
-static int platform_pm_prepare(struct device *dev)
+int platform_pm_prepare(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -678,7 +678,7 @@ static int platform_pm_prepare(struct device *dev)
 	return ret;
 }
 
-static void platform_pm_complete(struct device *dev)
+void platform_pm_complete(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 
@@ -686,16 +686,11 @@ static void platform_pm_complete(struct device *dev)
 		drv->pm->complete(dev);
 }
 
-#else /* !CONFIG_PM_SLEEP */
-
-#define platform_pm_prepare		NULL
-#define platform_pm_complete		NULL
-
-#endif /* !CONFIG_PM_SLEEP */
+#endif /* CONFIG_PM_SLEEP */
 
 #ifdef CONFIG_SUSPEND
 
-int __weak platform_pm_suspend(struct device *dev)
+int platform_pm_suspend(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -713,7 +708,7 @@ int __weak platform_pm_suspend(struct device *dev)
 	return ret;
 }
 
-int __weak platform_pm_suspend_noirq(struct device *dev)
+int platform_pm_suspend_noirq(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -729,7 +724,7 @@ int __weak platform_pm_suspend_noirq(struct device *dev)
 	return ret;
 }
 
-int __weak platform_pm_resume(struct device *dev)
+int platform_pm_resume(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -747,7 +742,7 @@ int __weak platform_pm_resume(struct device *dev)
 	return ret;
 }
 
-int __weak platform_pm_resume_noirq(struct device *dev)
+int platform_pm_resume_noirq(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -763,18 +758,11 @@ int __weak platform_pm_resume_noirq(struct device *dev)
 	return ret;
 }
 
-#else /* !CONFIG_SUSPEND */
-
-#define platform_pm_suspend		NULL
-#define platform_pm_resume		NULL
-#define platform_pm_suspend_noirq	NULL
-#define platform_pm_resume_noirq	NULL
-
-#endif /* !CONFIG_SUSPEND */
+#endif /* CONFIG_SUSPEND */
 
 #ifdef CONFIG_HIBERNATE_CALLBACKS
 
-static int platform_pm_freeze(struct device *dev)
+int platform_pm_freeze(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -792,7 +780,7 @@ static int platform_pm_freeze(struct device *dev)
 	return ret;
 }
 
-static int platform_pm_freeze_noirq(struct device *dev)
+int platform_pm_freeze_noirq(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -808,7 +796,7 @@ static int platform_pm_freeze_noirq(struct device *dev)
 	return ret;
 }
 
-static int platform_pm_thaw(struct device *dev)
+int platform_pm_thaw(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -826,7 +814,7 @@ static int platform_pm_thaw(struct device *dev)
 	return ret;
 }
 
-static int platform_pm_thaw_noirq(struct device *dev)
+int platform_pm_thaw_noirq(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -842,7 +830,7 @@ static int platform_pm_thaw_noirq(struct device *dev)
 	return ret;
 }
 
-static int platform_pm_poweroff(struct device *dev)
+int platform_pm_poweroff(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -860,7 +848,7 @@ static int platform_pm_poweroff(struct device *dev)
 	return ret;
 }
 
-static int platform_pm_poweroff_noirq(struct device *dev)
+int platform_pm_poweroff_noirq(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -876,7 +864,7 @@ static int platform_pm_poweroff_noirq(struct device *dev)
 	return ret;
 }
 
-static int platform_pm_restore(struct device *dev)
+int platform_pm_restore(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -894,7 +882,7 @@ static int platform_pm_restore(struct device *dev)
 	return ret;
 }
 
-static int platform_pm_restore_noirq(struct device *dev)
+int platform_pm_restore_noirq(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -910,62 +898,13 @@ static int platform_pm_restore_noirq(struct device *dev)
 	return ret;
 }
 
-#else /* !CONFIG_HIBERNATE_CALLBACKS */
-
-#define platform_pm_freeze		NULL
-#define platform_pm_thaw		NULL
-#define platform_pm_poweroff		NULL
-#define platform_pm_restore		NULL
-#define platform_pm_freeze_noirq	NULL
-#define platform_pm_thaw_noirq		NULL
-#define platform_pm_poweroff_noirq	NULL
-#define platform_pm_restore_noirq	NULL
-
-#endif /* !CONFIG_HIBERNATE_CALLBACKS */
-
-#ifdef CONFIG_PM_RUNTIME
-
-int __weak platform_pm_runtime_suspend(struct device *dev)
-{
-	return pm_generic_runtime_suspend(dev);
-};
-
-int __weak platform_pm_runtime_resume(struct device *dev)
-{
-	return pm_generic_runtime_resume(dev);
-};
-
-int __weak platform_pm_runtime_idle(struct device *dev)
-{
-	return pm_generic_runtime_idle(dev);
-};
-
-#else /* !CONFIG_PM_RUNTIME */
-
-#define platform_pm_runtime_suspend NULL
-#define platform_pm_runtime_resume NULL
-#define platform_pm_runtime_idle NULL
-
-#endif /* !CONFIG_PM_RUNTIME */
+#endif /* CONFIG_HIBERNATE_CALLBACKS */
 
 static const struct dev_pm_ops platform_dev_pm_ops = {
-	.prepare = platform_pm_prepare,
-	.complete = platform_pm_complete,
-	.suspend = platform_pm_suspend,
-	.resume = platform_pm_resume,
-	.freeze = platform_pm_freeze,
-	.thaw = platform_pm_thaw,
-	.poweroff = platform_pm_poweroff,
-	.restore = platform_pm_restore,
-	.suspend_noirq = platform_pm_suspend_noirq,
-	.resume_noirq = platform_pm_resume_noirq,
-	.freeze_noirq = platform_pm_freeze_noirq,
-	.thaw_noirq = platform_pm_thaw_noirq,
-	.poweroff_noirq = platform_pm_poweroff_noirq,
-	.restore_noirq = platform_pm_restore_noirq,
-	.runtime_suspend = platform_pm_runtime_suspend,
-	.runtime_resume = platform_pm_runtime_resume,
-	.runtime_idle = platform_pm_runtime_idle,
+	.runtime_suspend = pm_generic_runtime_suspend,
+	.runtime_resume = pm_generic_runtime_resume,
+	.runtime_idle = pm_generic_runtime_idle,
+	USE_PLATFORM_PM_SLEEP_OPS
 };
 
 struct bus_type platform_bus_type = {
@@ -977,41 +916,6 @@ struct bus_type platform_bus_type = {
 };
 EXPORT_SYMBOL_GPL(platform_bus_type);
 
-/**
- * platform_bus_get_pm_ops() - return pointer to busses dev_pm_ops
- *
- * This function can be used by platform code to get the current
- * set of dev_pm_ops functions used by the platform_bus_type.
- */
-const struct dev_pm_ops * __init platform_bus_get_pm_ops(void)
-{
-	return platform_bus_type.pm;
-}
-
-/**
- * platform_bus_set_pm_ops() - update dev_pm_ops for the platform_bus_type
- *
- * @pm: pointer to new dev_pm_ops struct to be used for platform_bus_type
- *
- * Platform code can override the dev_pm_ops methods of
- * platform_bus_type by using this function.  It is expected that
- * platform code will first do a platform_bus_get_pm_ops(), then
- * kmemdup it, then customize selected methods and pass a pointer to
- * the new struct dev_pm_ops to this function.
- *
- * Since platform-specific code is customizing methods for *all*
- * devices (not just platform-specific devices) it is expected that
- * any custom overrides of these functions will keep existing behavior
- * and simply extend it.  For example, any customization of the
- * runtime PM methods should continue to call the pm_generic_*
- * functions as the default ones do in addition to the
- * platform-specific behavior.
- */
-void __init platform_bus_set_pm_ops(const struct dev_pm_ops *pm)
-{
-	platform_bus_type.pm = pm;
-}
-
 int __init platform_bus_init(void)
 {
 	int error;
diff --git a/drivers/base/power/Makefile b/drivers/base/power/Makefile
index 118c1b92a51..3647e114d0e 100644
--- a/drivers/base/power/Makefile
+++ b/drivers/base/power/Makefile
@@ -3,6 +3,6 @@ obj-$(CONFIG_PM_SLEEP)	+= main.o wakeup.o
 obj-$(CONFIG_PM_RUNTIME)	+= runtime.o
 obj-$(CONFIG_PM_TRACE_RTC)	+= trace.o
 obj-$(CONFIG_PM_OPP)	+= opp.o
+obj-$(CONFIG_HAVE_CLK)	+= clock_ops.o
 
-ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
-ccflags-$(CONFIG_PM_VERBOSE)   += -DDEBUG
+ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
\ No newline at end of file
diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
new file mode 100644
index 00000000000..c0dd09df7be
--- /dev/null
+++ b/drivers/base/power/clock_ops.c
@@ -0,0 +1,431 @@
+/*
+ * drivers/base/power/clock_ops.c - Generic clock manipulation PM callbacks
+ *
+ * Copyright (c) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#ifdef CONFIG_PM_RUNTIME
+
+struct pm_runtime_clk_data {
+	struct list_head clock_list;
+	struct mutex lock;
+};
+
+enum pce_status {
+	PCE_STATUS_NONE = 0,
+	PCE_STATUS_ACQUIRED,
+	PCE_STATUS_ENABLED,
+	PCE_STATUS_ERROR,
+};
+
+struct pm_clock_entry {
+	struct list_head node;
+	char *con_id;
+	struct clk *clk;
+	enum pce_status status;
+};
+
+static struct pm_runtime_clk_data *__to_prd(struct device *dev)
+{
+	return dev ? dev->power.subsys_data : NULL;
+}
+
+/**
+ * pm_runtime_clk_add - Start using a device clock for runtime PM.
+ * @dev: Device whose clock is going to be used for runtime PM.
+ * @con_id: Connection ID of the clock.
+ *
+ * Add the clock represented by @con_id to the list of clocks used for
+ * the runtime PM of @dev.
+ */
+int pm_runtime_clk_add(struct device *dev, const char *con_id)
+{
+	struct pm_runtime_clk_data *prd = __to_prd(dev);
+	struct pm_clock_entry *ce;
+
+	if (!prd)
+		return -EINVAL;
+
+	ce = kzalloc(sizeof(*ce), GFP_KERNEL);
+	if (!ce) {
+		dev_err(dev, "Not enough memory for clock entry.\n");
+		return -ENOMEM;
+	}
+
+	if (con_id) {
+		ce->con_id = kstrdup(con_id, GFP_KERNEL);
+		if (!ce->con_id) {
+			dev_err(dev,
+				"Not enough memory for clock connection ID.\n");
+			kfree(ce);
+			return -ENOMEM;
+		}
+	}
+
+	mutex_lock(&prd->lock);
+	list_add_tail(&ce->node, &prd->clock_list);
+	mutex_unlock(&prd->lock);
+	return 0;
+}
+
+/**
+ * __pm_runtime_clk_remove - Destroy runtime PM clock entry.
+ * @ce: Runtime PM clock entry to destroy.
+ *
+ * This routine must be called under the mutex protecting the runtime PM list
+ * of clocks corresponding the the @ce's device.
+ */
+static void __pm_runtime_clk_remove(struct pm_clock_entry *ce)
+{
+	if (!ce)
+		return;
+
+	list_del(&ce->node);
+
+	if (ce->status < PCE_STATUS_ERROR) {
+		if (ce->status == PCE_STATUS_ENABLED)
+			clk_disable(ce->clk);
+
+		if (ce->status >= PCE_STATUS_ACQUIRED)
+			clk_put(ce->clk);
+	}
+
+	if (ce->con_id)
+		kfree(ce->con_id);
+
+	kfree(ce);
+}
+
+/**
+ * pm_runtime_clk_remove - Stop using a device clock for runtime PM.
+ * @dev: Device whose clock should not be used for runtime PM any more.
+ * @con_id: Connection ID of the clock.
+ *
+ * Remove the clock represented by @con_id from the list of clocks used for
+ * the runtime PM of @dev.
+ */
+void pm_runtime_clk_remove(struct device *dev, const char *con_id)
+{
+	struct pm_runtime_clk_data *prd = __to_prd(dev);
+	struct pm_clock_entry *ce;
+
+	if (!prd)
+		return;
+
+	mutex_lock(&prd->lock);
+
+	list_for_each_entry(ce, &prd->clock_list, node) {
+		if (!con_id && !ce->con_id) {
+			__pm_runtime_clk_remove(ce);
+			break;
+		} else if (!con_id || !ce->con_id) {
+			continue;
+		} else if (!strcmp(con_id, ce->con_id)) {
+			__pm_runtime_clk_remove(ce);
+			break;
+		}
+	}
+
+	mutex_unlock(&prd->lock);
+}
+
+/**
+ * pm_runtime_clk_init - Initialize a device's list of runtime PM clocks.
+ * @dev: Device to initialize the list of runtime PM clocks for.
+ *
+ * Allocate a struct pm_runtime_clk_data object, initialize its lock member and
+ * make the @dev's power.subsys_data field point to it.
+ */
+int pm_runtime_clk_init(struct device *dev)
+{
+	struct pm_runtime_clk_data *prd;
+
+	prd = kzalloc(sizeof(*prd), GFP_KERNEL);
+	if (!prd) {
+		dev_err(dev, "Not enough memory fo runtime PM data.\n");
+		return -ENOMEM;
+	}
+
+	INIT_LIST_HEAD(&prd->clock_list);
+	mutex_init(&prd->lock);
+	dev->power.subsys_data = prd;
+	return 0;
+}
+
+/**
+ * pm_runtime_clk_destroy - Destroy a device's list of runtime PM clocks.
+ * @dev: Device to destroy the list of runtime PM clocks for.
+ *
+ * Clear the @dev's power.subsys_data field, remove the list of clock entries
+ * from the struct pm_runtime_clk_data object pointed to by it before and free
+ * that object.
+ */
+void pm_runtime_clk_destroy(struct device *dev)
+{
+	struct pm_runtime_clk_data *prd = __to_prd(dev);
+	struct pm_clock_entry *ce, *c;
+
+	if (!prd)
+		return;
+
+	dev->power.subsys_data = NULL;
+
+	mutex_lock(&prd->lock);
+
+	list_for_each_entry_safe_reverse(ce, c, &prd->clock_list, node)
+		__pm_runtime_clk_remove(ce);
+
+	mutex_unlock(&prd->lock);
+
+	kfree(prd);
+}
+
+/**
+ * pm_runtime_clk_acquire - Acquire a device clock.
+ * @dev: Device whose clock is to be acquired.
+ * @con_id: Connection ID of the clock.
+ */
+static void pm_runtime_clk_acquire(struct device *dev,
+				    struct pm_clock_entry *ce)
+{
+	ce->clk = clk_get(dev, ce->con_id);
+	if (IS_ERR(ce->clk)) {
+		ce->status = PCE_STATUS_ERROR;
+	} else {
+		ce->status = PCE_STATUS_ACQUIRED;
+		dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id);
+	}
+}
+
+/**
+ * pm_runtime_clk_suspend - Disable clocks in a device's runtime PM clock list.
+ * @dev: Device to disable the clocks for.
+ */
+int pm_runtime_clk_suspend(struct device *dev)
+{
+	struct pm_runtime_clk_data *prd = __to_prd(dev);
+	struct pm_clock_entry *ce;
+
+	dev_dbg(dev, "%s()\n", __func__);
+
+	if (!prd)
+		return 0;
+
+	mutex_lock(&prd->lock);
+
+	list_for_each_entry_reverse(ce, &prd->clock_list, node) {
+		if (ce->status == PCE_STATUS_NONE)
+			pm_runtime_clk_acquire(dev, ce);
+
+		if (ce->status < PCE_STATUS_ERROR) {
+			clk_disable(ce->clk);
+			ce->status = PCE_STATUS_ACQUIRED;
+		}
+	}
+
+	mutex_unlock(&prd->lock);
+
+	return 0;
+}
+
+/**
+ * pm_runtime_clk_resume - Enable clocks in a device's runtime PM clock list.
+ * @dev: Device to enable the clocks for.
+ */
+int pm_runtime_clk_resume(struct device *dev)
+{
+	struct pm_runtime_clk_data *prd = __to_prd(dev);
+	struct pm_clock_entry *ce;
+
+	dev_dbg(dev, "%s()\n", __func__);
+
+	if (!prd)
+		return 0;
+
+	mutex_lock(&prd->lock);
+
+	list_for_each_entry(ce, &prd->clock_list, node) {
+		if (ce->status == PCE_STATUS_NONE)
+			pm_runtime_clk_acquire(dev, ce);
+
+		if (ce->status < PCE_STATUS_ERROR) {
+			clk_enable(ce->clk);
+			ce->status = PCE_STATUS_ENABLED;
+		}
+	}
+
+	mutex_unlock(&prd->lock);
+
+	return 0;
+}
+
+/**
+ * pm_runtime_clk_notify - Notify routine for device addition and removal.
+ * @nb: Notifier block object this function is a member of.
+ * @action: Operation being carried out by the caller.
+ * @data: Device the routine is being run for.
+ *
+ * For this function to work, @nb must be a member of an object of type
+ * struct pm_clk_notifier_block containing all of the requisite data.
+ * Specifically, the pwr_domain member of that object is copied to the device's
+ * pwr_domain field and its con_ids member is used to populate the device's list
+ * of runtime PM clocks, depending on @action.
+ *
+ * If the device's pwr_domain field is already populated with a value different
+ * from the one stored in the struct pm_clk_notifier_block object, the function
+ * does nothing.
+ */
+static int pm_runtime_clk_notify(struct notifier_block *nb,
+				 unsigned long action, void *data)
+{
+	struct pm_clk_notifier_block *clknb;
+	struct device *dev = data;
+	char *con_id;
+	int error;
+
+	dev_dbg(dev, "%s() %ld\n", __func__, action);
+
+	clknb = container_of(nb, struct pm_clk_notifier_block, nb);
+
+	switch (action) {
+	case BUS_NOTIFY_ADD_DEVICE:
+		if (dev->pwr_domain)
+			break;
+
+		error = pm_runtime_clk_init(dev);
+		if (error)
+			break;
+
+		dev->pwr_domain = clknb->pwr_domain;
+		if (clknb->con_ids[0]) {
+			for (con_id = clknb->con_ids[0]; *con_id; con_id++)
+				pm_runtime_clk_add(dev, con_id);
+		} else {
+			pm_runtime_clk_add(dev, NULL);
+		}
+
+		break;
+	case BUS_NOTIFY_DEL_DEVICE:
+		if (dev->pwr_domain != clknb->pwr_domain)
+			break;
+
+		dev->pwr_domain = NULL;
+		pm_runtime_clk_destroy(dev);
+		break;
+	}
+
+	return 0;
+}
+
+#else /* !CONFIG_PM_RUNTIME */
+
+/**
+ * enable_clock - Enable a device clock.
+ * @dev: Device whose clock is to be enabled.
+ * @con_id: Connection ID of the clock.
+ */
+static void enable_clock(struct device *dev, const char *con_id)
+{
+	struct clk *clk;
+
+	clk = clk_get(dev, con_id);
+	if (!IS_ERR(clk)) {
+		clk_enable(clk);
+		clk_put(clk);
+		dev_info(dev, "Runtime PM disabled, clock forced on.\n");
+	}
+}
+
+/**
+ * disable_clock - Disable a device clock.
+ * @dev: Device whose clock is to be disabled.
+ * @con_id: Connection ID of the clock.
+ */
+static void disable_clock(struct device *dev, const char *con_id)
+{
+	struct clk *clk;
+
+	clk = clk_get(dev, con_id);
+	if (!IS_ERR(clk)) {
+		clk_disable(clk);
+		clk_put(clk);
+		dev_info(dev, "Runtime PM disabled, clock forced off.\n");
+	}
+}
+
+/**
+ * pm_runtime_clk_notify - Notify routine for device addition and removal.
+ * @nb: Notifier block object this function is a member of.
+ * @action: Operation being carried out by the caller.
+ * @data: Device the routine is being run for.
+ *
+ * For this function to work, @nb must be a member of an object of type
+ * struct pm_clk_notifier_block containing all of the requisite data.
+ * Specifically, the con_ids member of that object is used to enable or disable
+ * the device's clocks, depending on @action.
+ */
+static int pm_runtime_clk_notify(struct notifier_block *nb,
+				 unsigned long action, void *data)
+{
+	struct pm_clk_notifier_block *clknb;
+	struct device *dev = data;
+	char *con_id;
+
+	dev_dbg(dev, "%s() %ld\n", __func__, action);
+
+	clknb = container_of(nb, struct pm_clk_notifier_block, nb);
+
+	switch (action) {
+	case BUS_NOTIFY_ADD_DEVICE:
+		if (clknb->con_ids[0]) {
+			for (con_id = clknb->con_ids[0]; *con_id; con_id++)
+				enable_clock(dev, con_id);
+		} else {
+			enable_clock(dev, NULL);
+		}
+		break;
+	case BUS_NOTIFY_DEL_DEVICE:
+		if (clknb->con_ids[0]) {
+			for (con_id = clknb->con_ids[0]; *con_id; con_id++)
+				disable_clock(dev, con_id);
+		} else {
+			disable_clock(dev, NULL);
+		}
+		break;
+	}
+
+	return 0;
+}
+
+#endif /* !CONFIG_PM_RUNTIME */
+
+/**
+ * pm_runtime_clk_add_notifier - Add bus type notifier for runtime PM clocks.
+ * @bus: Bus type to add the notifier to.
+ * @clknb: Notifier to be added to the given bus type.
+ *
+ * The nb member of @clknb is not expected to be initialized and its
+ * notifier_call member will be replaced with pm_runtime_clk_notify().  However,
+ * the remaining members of @clknb should be populated prior to calling this
+ * routine.
+ */
+void pm_runtime_clk_add_notifier(struct bus_type *bus,
+				 struct pm_clk_notifier_block *clknb)
+{
+	if (!bus || !clknb)
+		return;
+
+	clknb->nb.notifier_call = pm_runtime_clk_notify;
+	bus_register_notifier(bus, &clknb->nb);
+}
diff --git a/drivers/base/power/generic_ops.c b/drivers/base/power/generic_ops.c
index 42f97f92562..cb3bb368681 100644
--- a/drivers/base/power/generic_ops.c
+++ b/drivers/base/power/generic_ops.c
@@ -74,6 +74,23 @@ EXPORT_SYMBOL_GPL(pm_generic_runtime_resume);
 
 #ifdef CONFIG_PM_SLEEP
 /**
+ * pm_generic_prepare - Generic routine preparing a device for power transition.
+ * @dev: Device to prepare.
+ *
+ * Prepare a device for a system-wide power transition.
+ */
+int pm_generic_prepare(struct device *dev)
+{
+	struct device_driver *drv = dev->driver;
+	int ret = 0;
+
+	if (drv && drv->pm && drv->pm->prepare)
+		ret = drv->pm->prepare(dev);
+
+	return ret;
+}
+
+/**
  * __pm_generic_call - Generic suspend/freeze/poweroff/thaw subsystem callback.
  * @dev: Device to handle.
  * @event: PM transition of the system under way.
@@ -213,16 +230,38 @@ int pm_generic_restore(struct device *dev)
 	return __pm_generic_resume(dev, PM_EVENT_RESTORE);
 }
 EXPORT_SYMBOL_GPL(pm_generic_restore);
+
+/**
+ * pm_generic_complete - Generic routine competing a device power transition.
+ * @dev: Device to handle.
+ *
+ * Complete a device power transition during a system-wide power transition.
+ */
+void pm_generic_complete(struct device *dev)
+{
+	struct device_driver *drv = dev->driver;
+
+	if (drv && drv->pm && drv->pm->complete)
+		drv->pm->complete(dev);
+
+	/*
+	 * Let runtime PM try to suspend devices that haven't been in use before
+	 * going into the system-wide sleep state we're resuming from.
+	 */
+	pm_runtime_idle(dev);
+}
 #endif /* CONFIG_PM_SLEEP */
 
 struct dev_pm_ops generic_subsys_pm_ops = {
 #ifdef CONFIG_PM_SLEEP
+	.prepare = pm_generic_prepare,
 	.suspend = pm_generic_suspend,
 	.resume = pm_generic_resume,
 	.freeze = pm_generic_freeze,
 	.thaw = pm_generic_thaw,
 	.poweroff = pm_generic_poweroff,
 	.restore = pm_generic_restore,
+	.complete = pm_generic_complete,
 #endif
 #ifdef CONFIG_PM_RUNTIME
 	.runtime_suspend = pm_generic_runtime_suspend,
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index abe3ab709e8..aa632020774 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -426,10 +426,8 @@ static int device_resume_noirq(struct device *dev, pm_message_t state)
 
 	if (dev->pwr_domain) {
 		pm_dev_dbg(dev, state, "EARLY power domain ");
-		pm_noirq_op(dev, &dev->pwr_domain->ops, state);
-	}
-
-	if (dev->type && dev->type->pm) {
+		error = pm_noirq_op(dev, &dev->pwr_domain->ops, state);
+	} else if (dev->type && dev->type->pm) {
 		pm_dev_dbg(dev, state, "EARLY type ");
 		error = pm_noirq_op(dev, dev->type->pm, state);
 	} else if (dev->class && dev->class->pm) {
@@ -517,7 +515,8 @@ static int device_resume(struct device *dev, pm_message_t state, bool async)
 
 	if (dev->pwr_domain) {
 		pm_dev_dbg(dev, state, "power domain ");
-		pm_op(dev, &dev->pwr_domain->ops, state);
+		error = pm_op(dev, &dev->pwr_domain->ops, state);
+		goto End;
 	}
 
 	if (dev->type && dev->type->pm) {
@@ -580,11 +579,13 @@ static bool is_async(struct device *dev)
  * Execute the appropriate "resume" callback for all devices whose status
  * indicates that they are suspended.
  */
-static void dpm_resume(pm_message_t state)
+void dpm_resume(pm_message_t state)
 {
 	struct device *dev;
 	ktime_t starttime = ktime_get();
 
+	might_sleep();
+
 	mutex_lock(&dpm_list_mtx);
 	pm_transition = state;
 	async_error = 0;
@@ -629,12 +630,11 @@ static void device_complete(struct device *dev, pm_message_t state)
 {
 	device_lock(dev);
 
-	if (dev->pwr_domain && dev->pwr_domain->ops.complete) {
+	if (dev->pwr_domain) {
 		pm_dev_dbg(dev, state, "completing power domain ");
-		dev->pwr_domain->ops.complete(dev);
-	}
-
-	if (dev->type && dev->type->pm) {
+		if (dev->pwr_domain->ops.complete)
+			dev->pwr_domain->ops.complete(dev);
+	} else if (dev->type && dev->type->pm) {
 		pm_dev_dbg(dev, state, "completing type ");
 		if (dev->type->pm->complete)
 			dev->type->pm->complete(dev);
@@ -658,10 +658,12 @@ static void device_complete(struct device *dev, pm_message_t state)
  * Execute the ->complete() callbacks for all devices whose PM status is not
  * DPM_ON (this allows new devices to be registered).
  */
-static void dpm_complete(pm_message_t state)
+void dpm_complete(pm_message_t state)
 {
 	struct list_head list;
 
+	might_sleep();
+
 	INIT_LIST_HEAD(&list);
 	mutex_lock(&dpm_list_mtx);
 	while (!list_empty(&dpm_prepared_list)) {
@@ -690,7 +692,6 @@ static void dpm_complete(pm_message_t state)
  */
 void dpm_resume_end(pm_message_t state)
 {
-	might_sleep();
 	dpm_resume(state);
 	dpm_complete(state);
 }
@@ -732,7 +733,12 @@ static int device_suspend_noirq(struct device *dev, pm_message_t state)
 {
 	int error;
 
-	if (dev->type && dev->type->pm) {
+	if (dev->pwr_domain) {
+		pm_dev_dbg(dev, state, "LATE power domain ");
+		error = pm_noirq_op(dev, &dev->pwr_domain->ops, state);
+		if (error)
+			return error;
+	} else if (dev->type && dev->type->pm) {
 		pm_dev_dbg(dev, state, "LATE type ");
 		error = pm_noirq_op(dev, dev->type->pm, state);
 		if (error)
@@ -749,11 +755,6 @@ static int device_suspend_noirq(struct device *dev, pm_message_t state)
 			return error;
 	}
 
-	if (dev->pwr_domain) {
-		pm_dev_dbg(dev, state, "LATE power domain ");
-		pm_noirq_op(dev, &dev->pwr_domain->ops, state);
-	}
-
 	return 0;
 }
 
@@ -841,21 +842,27 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
 		goto End;
 	}
 
+	if (dev->pwr_domain) {
+		pm_dev_dbg(dev, state, "power domain ");
+		error = pm_op(dev, &dev->pwr_domain->ops, state);
+		goto End;
+	}
+
 	if (dev->type && dev->type->pm) {
 		pm_dev_dbg(dev, state, "type ");
 		error = pm_op(dev, dev->type->pm, state);
-		goto Domain;
+		goto End;
 	}
 
 	if (dev->class) {
 		if (dev->class->pm) {
 			pm_dev_dbg(dev, state, "class ");
 			error = pm_op(dev, dev->class->pm, state);
-			goto Domain;
+			goto End;
 		} else if (dev->class->suspend) {
 			pm_dev_dbg(dev, state, "legacy class ");
 			error = legacy_suspend(dev, state, dev->class->suspend);
-			goto Domain;
+			goto End;
 		}
 	}
 
@@ -869,12 +876,6 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
 		}
 	}
 
- Domain:
-	if (!error && dev->pwr_domain) {
-		pm_dev_dbg(dev, state, "power domain ");
-		pm_op(dev, &dev->pwr_domain->ops, state);
-	}
-
  End:
 	device_unlock(dev);
 	complete_all(&dev->power.completion);
@@ -914,11 +915,13 @@ static int device_suspend(struct device *dev)
  * dpm_suspend - Execute "suspend" callbacks for all non-sysdev devices.
  * @state: PM transition of the system being carried out.
  */
-static int dpm_suspend(pm_message_t state)
+int dpm_suspend(pm_message_t state)
 {
 	ktime_t starttime = ktime_get();
 	int error = 0;
 
+	might_sleep();
+
 	mutex_lock(&dpm_list_mtx);
 	pm_transition = state;
 	async_error = 0;
@@ -965,7 +968,14 @@ static int device_prepare(struct device *dev, pm_message_t state)
 
 	device_lock(dev);
 
-	if (dev->type && dev->type->pm) {
+	if (dev->pwr_domain) {
+		pm_dev_dbg(dev, state, "preparing power domain ");
+		if (dev->pwr_domain->ops.prepare)
+			error = dev->pwr_domain->ops.prepare(dev);
+		suspend_report_result(dev->pwr_domain->ops.prepare, error);
+		if (error)
+			goto End;
+	} else if (dev->type && dev->type->pm) {
 		pm_dev_dbg(dev, state, "preparing type ");
 		if (dev->type->pm->prepare)
 			error = dev->type->pm->prepare(dev);
@@ -984,13 +994,6 @@ static int device_prepare(struct device *dev, pm_message_t state)
 		if (dev->bus->pm->prepare)
 			error = dev->bus->pm->prepare(dev);
 		suspend_report_result(dev->bus->pm->prepare, error);
-		if (error)
-			goto End;
-	}
-
-	if (dev->pwr_domain && dev->pwr_domain->ops.prepare) {
-		pm_dev_dbg(dev, state, "preparing power domain ");
-		dev->pwr_domain->ops.prepare(dev);
 	}
 
  End:
@@ -1005,10 +1008,12 @@ static int device_prepare(struct device *dev, pm_message_t state)
  *
  * Execute the ->prepare() callback(s) for all devices.
  */
-static int dpm_prepare(pm_message_t state)
+int dpm_prepare(pm_message_t state)
 {
 	int error = 0;
 
+	might_sleep();
+
 	mutex_lock(&dpm_list_mtx);
 	while (!list_empty(&dpm_list)) {
 		struct device *dev = to_device(dpm_list.next);
@@ -1057,7 +1062,6 @@ int dpm_suspend_start(pm_message_t state)
 {
 	int error;
 
-	might_sleep();
 	error = dpm_prepare(state);
 	if (!error)
 		error = dpm_suspend(state);
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 3172c60d23a..0d4587b15c5 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -168,7 +168,6 @@ static int rpm_check_suspend_allowed(struct device *dev)
 static int rpm_idle(struct device *dev, int rpmflags)
 {
 	int (*callback)(struct device *);
-	int (*domain_callback)(struct device *);
 	int retval;
 
 	retval = rpm_check_suspend_allowed(dev);
@@ -214,7 +213,9 @@ static int rpm_idle(struct device *dev, int rpmflags)
 
 	dev->power.idle_notification = true;
 
-	if (dev->type && dev->type->pm)
+	if (dev->pwr_domain)
+		callback = dev->pwr_domain->ops.runtime_idle;
+	else if (dev->type && dev->type->pm)
 		callback = dev->type->pm->runtime_idle;
 	else if (dev->class && dev->class->pm)
 		callback = dev->class->pm->runtime_idle;
@@ -223,19 +224,10 @@ static int rpm_idle(struct device *dev, int rpmflags)
 	else
 		callback = NULL;
 
-	if (dev->pwr_domain)
-		domain_callback = dev->pwr_domain->ops.runtime_idle;
-	else
-		domain_callback = NULL;
-
-	if (callback || domain_callback) {
+	if (callback) {
 		spin_unlock_irq(&dev->power.lock);
 
-		if (domain_callback)
-			retval = domain_callback(dev);
-
-		if (!retval && callback)
-			callback(dev);
+		callback(dev);
 
 		spin_lock_irq(&dev->power.lock);
 	}
@@ -382,7 +374,9 @@ static int rpm_suspend(struct device *dev, int rpmflags)
 
 	__update_runtime_status(dev, RPM_SUSPENDING);
 
-	if (dev->type && dev->type->pm)
+	if (dev->pwr_domain)
+		callback = dev->pwr_domain->ops.runtime_suspend;
+	else if (dev->type && dev->type->pm)
 		callback = dev->type->pm->runtime_suspend;
 	else if (dev->class && dev->class->pm)
 		callback = dev->class->pm->runtime_suspend;
@@ -400,8 +394,6 @@ static int rpm_suspend(struct device *dev, int rpmflags)
 		else
 			pm_runtime_cancel_pending(dev);
 	} else {
-		if (dev->pwr_domain)
-			rpm_callback(dev->pwr_domain->ops.runtime_suspend, dev);
  no_callback:
 		__update_runtime_status(dev, RPM_SUSPENDED);
 		pm_runtime_deactivate_timer(dev);
@@ -582,9 +574,8 @@ static int rpm_resume(struct device *dev, int rpmflags)
 	__update_runtime_status(dev, RPM_RESUMING);
 
 	if (dev->pwr_domain)
-		rpm_callback(dev->pwr_domain->ops.runtime_resume, dev);
-
-	if (dev->type && dev->type->pm)
+		callback = dev->pwr_domain->ops.runtime_resume;
+	else if (dev->type && dev->type->pm)
 		callback = dev->type->pm->runtime_resume;
 	else if (dev->class && dev->class->pm)
 		callback = dev->class->pm->runtime_resume;
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index fff49bee781..a9f5b897961 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -212,8 +212,9 @@ static ssize_t autosuspend_delay_ms_store(struct device *dev,
 static DEVICE_ATTR(autosuspend_delay_ms, 0644, autosuspend_delay_ms_show,
 		autosuspend_delay_ms_store);
 
-#endif
+#endif /* CONFIG_PM_RUNTIME */
 
+#ifdef CONFIG_PM_SLEEP
 static ssize_t
 wake_show(struct device * dev, struct device_attribute *attr, char * buf)
 {
@@ -248,7 +249,6 @@ wake_store(struct device * dev, struct device_attribute *attr,
 
 static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store);
 
-#ifdef CONFIG_PM_SLEEP
 static ssize_t wakeup_count_show(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c
index abbbd33e8d8..84f7c7d5a09 100644
--- a/drivers/base/power/wakeup.c
+++ b/drivers/base/power/wakeup.c
@@ -110,7 +110,6 @@ void wakeup_source_add(struct wakeup_source *ws)
 	spin_lock_irq(&events_lock);
 	list_add_rcu(&ws->entry, &wakeup_sources);
 	spin_unlock_irq(&events_lock);
-	synchronize_rcu();
 }
 EXPORT_SYMBOL_GPL(wakeup_source_add);
 
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index acde9b5ee13..9dff77bfe1e 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -328,203 +328,8 @@ void sysdev_unregister(struct sys_device *sysdev)
 	kobject_put(&sysdev->kobj);
 }
 
-
-#ifndef CONFIG_ARCH_NO_SYSDEV_OPS
-/**
- *	sysdev_shutdown - Shut down all system devices.
- *
- *	Loop over each class of system devices, and the devices in each
- *	of those classes. For each device, we call the shutdown method for
- *	each driver registered for the device - the auxiliaries,
- *	and the class driver.
- *
- *	Note: The list is iterated in reverse order, so that we shut down
- *	child devices before we shut down their parents. The list ordering
- *	is guaranteed by virtue of the fact that child devices are registered
- *	after their parents.
- */
-void sysdev_shutdown(void)
-{
-	struct sysdev_class *cls;
-
-	pr_debug("Shutting Down System Devices\n");
-
-	mutex_lock(&sysdev_drivers_lock);
-	list_for_each_entry_reverse(cls, &system_kset->list, kset.kobj.entry) {
-		struct sys_device *sysdev;
-
-		pr_debug("Shutting down type '%s':\n",
-			 kobject_name(&cls->kset.kobj));
-
-		list_for_each_entry(sysdev, &cls->kset.list, kobj.entry) {
-			struct sysdev_driver *drv;
-			pr_debug(" %s\n", kobject_name(&sysdev->kobj));
-
-			/* Call auxiliary drivers first */
-			list_for_each_entry(drv, &cls->drivers, entry) {
-				if (drv->shutdown)
-					drv->shutdown(sysdev);
-			}
-
-			/* Now call the generic one */
-			if (cls->shutdown)
-				cls->shutdown(sysdev);
-		}
-	}
-	mutex_unlock(&sysdev_drivers_lock);
-}
-
-static void __sysdev_resume(struct sys_device *dev)
-{
-	struct sysdev_class *cls = dev->cls;
-	struct sysdev_driver *drv;
-
-	/* First, call the class-specific one */
-	if (cls->resume)
-		cls->resume(dev);
-	WARN_ONCE(!irqs_disabled(),
-		"Interrupts enabled after %pF\n", cls->resume);
-
-	/* Call auxiliary drivers next. */
-	list_for_each_entry(drv, &cls->drivers, entry) {
-		if (drv->resume)
-			drv->resume(dev);
-		WARN_ONCE(!irqs_disabled(),
-			"Interrupts enabled after %pF\n", drv->resume);
-	}
-}
-
-/**
- *	sysdev_suspend - Suspend all system devices.
- *	@state:		Power state to enter.
- *
- *	We perform an almost identical operation as sysdev_shutdown()
- *	above, though calling ->suspend() instead. Interrupts are disabled
- *	when this called. Devices are responsible for both saving state and
- *	quiescing or powering down the device.
- *
- *	This is only called by the device PM core, so we let them handle
- *	all synchronization.
- */
-int sysdev_suspend(pm_message_t state)
-{
-	struct sysdev_class *cls;
-	struct sys_device *sysdev, *err_dev;
-	struct sysdev_driver *drv, *err_drv;
-	int ret;
-
-	pr_debug("Checking wake-up interrupts\n");
-
-	/* Return error code if there are any wake-up interrupts pending */
-	ret = check_wakeup_irqs();
-	if (ret)
-		return ret;
-
-	WARN_ONCE(!irqs_disabled(),
-		"Interrupts enabled while suspending system devices\n");
-
-	pr_debug("Suspending System Devices\n");
-
-	list_for_each_entry_reverse(cls, &system_kset->list, kset.kobj.entry) {
-		pr_debug("Suspending type '%s':\n",
-			 kobject_name(&cls->kset.kobj));
-
-		list_for_each_entry(sysdev, &cls->kset.list, kobj.entry) {
-			pr_debug(" %s\n", kobject_name(&sysdev->kobj));
-
-			/* Call auxiliary drivers first */
-			list_for_each_entry(drv, &cls->drivers, entry) {
-				if (drv->suspend) {
-					ret = drv->suspend(sysdev, state);
-					if (ret)
-						goto aux_driver;
-				}
-				WARN_ONCE(!irqs_disabled(),
-					"Interrupts enabled after %pF\n",
-					drv->suspend);
-			}
-
-			/* Now call the generic one */
-			if (cls->suspend) {
-				ret = cls->suspend(sysdev, state);
-				if (ret)
-					goto cls_driver;
-				WARN_ONCE(!irqs_disabled(),
-					"Interrupts enabled after %pF\n",
-					cls->suspend);
-			}
-		}
-	}
-	return 0;
-	/* resume current sysdev */
-cls_driver:
-	drv = NULL;
-	printk(KERN_ERR "Class suspend failed for %s: %d\n",
-		kobject_name(&sysdev->kobj), ret);
-
-aux_driver:
-	if (drv)
-		printk(KERN_ERR "Class driver suspend failed for %s: %d\n",
-				kobject_name(&sysdev->kobj), ret);
-	list_for_each_entry(err_drv, &cls->drivers, entry) {
-		if (err_drv == drv)
-			break;
-		if (err_drv->resume)
-			err_drv->resume(sysdev);
-	}
-
-	/* resume other sysdevs in current class */
-	list_for_each_entry(err_dev, &cls->kset.list, kobj.entry) {
-		if (err_dev == sysdev)
-			break;
-		pr_debug(" %s\n", kobject_name(&err_dev->kobj));
-		__sysdev_resume(err_dev);
-	}
-
-	/* resume other classes */
-	list_for_each_entry_continue(cls, &system_kset->list, kset.kobj.entry) {
-		list_for_each_entry(err_dev, &cls->kset.list, kobj.entry) {
-			pr_debug(" %s\n", kobject_name(&err_dev->kobj));
-			__sysdev_resume(err_dev);
-		}
-	}
-	return ret;
-}
-EXPORT_SYMBOL_GPL(sysdev_suspend);
-
-/**
- *	sysdev_resume - Bring system devices back to life.
- *
- *	Similar to sysdev_suspend(), but we iterate the list forwards
- *	to guarantee that parent devices are resumed before their children.
- *
- *	Note: Interrupts are disabled when called.
- */
-int sysdev_resume(void)
-{
-	struct sysdev_class *cls;
-
-	WARN_ONCE(!irqs_disabled(),
-		"Interrupts enabled while resuming system devices\n");
-
-	pr_debug("Resuming System Devices\n");
-
-	list_for_each_entry(cls, &system_kset->list, kset.kobj.entry) {
-		struct sys_device *sysdev;
-
-		pr_debug("Resuming type '%s':\n",
-			 kobject_name(&cls->kset.kobj));
-
-		list_for_each_entry(sysdev, &cls->kset.list, kobj.entry) {
-			pr_debug(" %s\n", kobject_name(&sysdev->kobj));
-
-			__sysdev_resume(sysdev);
-		}
-	}
-	return 0;
-}
-EXPORT_SYMBOL_GPL(sysdev_resume);
-#endif /* CONFIG_ARCH_NO_SYSDEV_OPS */
+EXPORT_SYMBOL_GPL(sysdev_register);
+EXPORT_SYMBOL_GPL(sysdev_unregister);
 
 int __init system_bus_init(void)
 {
@@ -534,9 +339,6 @@ int __init system_bus_init(void)
 	return 0;
 }
 
-EXPORT_SYMBOL_GPL(sysdev_register);
-EXPORT_SYMBOL_GPL(sysdev_unregister);
-
 #define to_ext_attr(x) container_of(x, struct sysdev_ext_attribute, attr)
 
 ssize_t sysdev_store_ulong(struct sys_device *sysdev,
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index ad59b4e0a9b..49502bc5360 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -523,7 +523,7 @@ config RAW_DRIVER
           with the O_DIRECT flag.
 
 config MAX_RAW_DEVS
-	int "Maximum number of RAW devices to support (1-8192)"
+	int "Maximum number of RAW devices to support (1-65536)"
 	depends on RAW_DRIVER
 	default "256"
 	help
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 7066e801b9d..051474c65b7 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -84,8 +84,6 @@ static struct clocksource clocksource_hpet = {
 	.rating		= 250,
 	.read		= read_hpet,
 	.mask		= CLOCKSOURCE_MASK(64),
-	.mult		= 0,		/* to be calculated */
-	.shift		= 10,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 static struct clocksource *hpet_clocksource;
@@ -934,9 +932,7 @@ int hpet_alloc(struct hpet_data *hdp)
 	if (!hpet_clocksource) {
 		hpet_mctr = (void __iomem *)&hpetp->hp_hpet->hpet_mc;
 		CLKSRC_FSYS_MMIO_SET(clocksource_hpet.fsys_mmio, hpet_mctr);
-		clocksource_hpet.mult = clocksource_hz2mult(hpetp->hp_tick_freq,
-						clocksource_hpet.shift);
-		clocksource_register(&clocksource_hpet);
+		clocksource_register_hz(&clocksource_hpet, hpetp->hp_tick_freq);
 		hpetp->hp_clocksource = &clocksource_hpet;
 		hpet_clocksource = &clocksource_hpet;
 	}
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 436a9901799..8fc04b4f311 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -806,29 +806,41 @@ static const struct file_operations oldmem_fops = {
 };
 #endif
 
-static ssize_t kmsg_write(struct file *file, const char __user *buf,
-			  size_t count, loff_t *ppos)
+static ssize_t kmsg_writev(struct kiocb *iocb, const struct iovec *iv,
+			   unsigned long count, loff_t pos)
 {
-	char *tmp;
-	ssize_t ret;
+	char *line, *p;
+	int i;
+	ssize_t ret = -EFAULT;
+	size_t len = iov_length(iv, count);
 
-	tmp = kmalloc(count + 1, GFP_KERNEL);
-	if (tmp == NULL)
+	line = kmalloc(len + 1, GFP_KERNEL);
+	if (line == NULL)
 		return -ENOMEM;
-	ret = -EFAULT;
-	if (!copy_from_user(tmp, buf, count)) {
-		tmp[count] = 0;
-		ret = printk("%s", tmp);
-		if (ret > count)
-			/* printk can add a prefix */
-			ret = count;
+
+	/*
+	 * copy all vectors into a single string, to ensure we do
+	 * not interleave our log line with other printk calls
+	 */
+	p = line;
+	for (i = 0; i < count; i++) {
+		if (copy_from_user(p, iv[i].iov_base, iv[i].iov_len))
+			goto out;
+		p += iv[i].iov_len;
 	}
-	kfree(tmp);
+	p[0] = '\0';
+
+	ret = printk("%s", line);
+	/* printk can add a prefix */
+	if (ret > len)
+		ret = len;
+out:
+	kfree(line);
 	return ret;
 }
 
 static const struct file_operations kmsg_fops = {
-	.write = kmsg_write,
+	.aio_write = kmsg_writev,
 	.llseek = noop_llseek,
 };
 
diff --git a/drivers/char/raw.c b/drivers/char/raw.c
index b4b9d5a4788..b33e8ea314e 100644
--- a/drivers/char/raw.c
+++ b/drivers/char/raw.c
@@ -21,6 +21,7 @@
 #include <linux/mutex.h>
 #include <linux/gfp.h>
 #include <linux/compat.h>
+#include <linux/vmalloc.h>
 
 #include <asm/uaccess.h>
 
@@ -30,10 +31,15 @@ struct raw_device_data {
 };
 
 static struct class *raw_class;
-static struct raw_device_data raw_devices[MAX_RAW_MINORS];
+static struct raw_device_data *raw_devices;
 static DEFINE_MUTEX(raw_mutex);
 static const struct file_operations raw_ctl_fops; /* forward declaration */
 
+static int max_raw_minors = MAX_RAW_MINORS;
+
+module_param(max_raw_minors, int, 0);
+MODULE_PARM_DESC(max_raw_minors, "Maximum number of raw devices (1-65536)");
+
 /*
  * Open/close code for raw IO.
  *
@@ -125,7 +131,7 @@ static int bind_set(int number, u64 major, u64 minor)
 	struct raw_device_data *rawdev;
 	int err = 0;
 
-	if (number <= 0 || number >= MAX_RAW_MINORS)
+	if (number <= 0 || number >= max_raw_minors)
 		return -EINVAL;
 
 	if (MAJOR(dev) != major || MINOR(dev) != minor)
@@ -312,14 +318,27 @@ static int __init raw_init(void)
 	dev_t dev = MKDEV(RAW_MAJOR, 0);
 	int ret;
 
-	ret = register_chrdev_region(dev, MAX_RAW_MINORS, "raw");
+	if (max_raw_minors < 1 || max_raw_minors > 65536) {
+		printk(KERN_WARNING "raw: invalid max_raw_minors (must be"
+			" between 1 and 65536), using %d\n", MAX_RAW_MINORS);
+		max_raw_minors = MAX_RAW_MINORS;
+	}
+
+	raw_devices = vmalloc(sizeof(struct raw_device_data) * max_raw_minors);
+	if (!raw_devices) {
+		printk(KERN_ERR "Not enough memory for raw device structures\n");
+		ret = -ENOMEM;
+		goto error;
+	}
+	memset(raw_devices, 0, sizeof(struct raw_device_data) * max_raw_minors);
+
+	ret = register_chrdev_region(dev, max_raw_minors, "raw");
 	if (ret)
 		goto error;
 
 	cdev_init(&raw_cdev, &raw_fops);
-	ret = cdev_add(&raw_cdev, dev, MAX_RAW_MINORS);
+	ret = cdev_add(&raw_cdev, dev, max_raw_minors);
 	if (ret) {
-		kobject_put(&raw_cdev.kobj);
 		goto error_region;
 	}
 
@@ -336,8 +355,9 @@ static int __init raw_init(void)
 	return 0;
 
 error_region:
-	unregister_chrdev_region(dev, MAX_RAW_MINORS);
+	unregister_chrdev_region(dev, max_raw_minors);
 error:
+	vfree(raw_devices);
 	return ret;
 }
 
@@ -346,7 +366,7 @@ static void __exit raw_exit(void)
 	device_destroy(raw_class, MKDEV(RAW_MAJOR, 0));
 	class_destroy(raw_class);
 	cdev_del(&raw_cdev);
-	unregister_chrdev_region(MKDEV(RAW_MAJOR, 0), MAX_RAW_MINORS);
+	unregister_chrdev_region(MKDEV(RAW_MAJOR, 0), max_raw_minors);
 }
 
 module_init(raw_init);
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
new file mode 100644
index 00000000000..110aeeb52f9
--- /dev/null
+++ b/drivers/clocksource/Kconfig
@@ -0,0 +1,2 @@
+config CLKSRC_I8253
+	bool
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index be61ece6330..cfb6383b543 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_CS5535_CLOCK_EVENT_SRC)	+= cs5535-clockevt.o
 obj-$(CONFIG_SH_TIMER_CMT)	+= sh_cmt.o
 obj-$(CONFIG_SH_TIMER_MTU2)	+= sh_mtu2.o
 obj-$(CONFIG_SH_TIMER_TMU)	+= sh_tmu.o
+obj-$(CONFIG_CLKSRC_I8253)	+= i8253.o
diff --git a/drivers/clocksource/cyclone.c b/drivers/clocksource/cyclone.c
index 64e528e8bfa..72f811f73e9 100644
--- a/drivers/clocksource/cyclone.c
+++ b/drivers/clocksource/cyclone.c
@@ -29,8 +29,6 @@ static struct clocksource clocksource_cyclone = {
 	.rating		= 250,
 	.read		= read_cyclone,
 	.mask		= CYCLONE_TIMER_MASK,
-	.mult		= 10,
-	.shift		= 0,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -108,12 +106,8 @@ static int __init init_cyclone_clocksource(void)
 	}
 	cyclone_ptr = cyclone_timer;
 
-	/* sort out mult/shift values: */
-	clocksource_cyclone.shift = 22;
-	clocksource_cyclone.mult = clocksource_hz2mult(CYCLONE_TIMER_FREQ,
-						clocksource_cyclone.shift);
-
-	return clocksource_register(&clocksource_cyclone);
+	return clocksource_register_hz(&clocksource_cyclone,
+					CYCLONE_TIMER_FREQ);
 }
 
 arch_initcall(init_cyclone_clocksource);
diff --git a/drivers/clocksource/i8253.c b/drivers/clocksource/i8253.c
new file mode 100644
index 00000000000..225c1761b37
--- /dev/null
+++ b/drivers/clocksource/i8253.c
@@ -0,0 +1,88 @@
+/*
+ * i8253 PIT clocksource
+ */
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/timex.h>
+
+#include <asm/i8253.h>
+
+/*
+ * Since the PIT overflows every tick, its not very useful
+ * to just read by itself. So use jiffies to emulate a free
+ * running counter:
+ */
+static cycle_t i8253_read(struct clocksource *cs)
+{
+	static int old_count;
+	static u32 old_jifs;
+	unsigned long flags;
+	int count;
+	u32 jifs;
+
+	raw_spin_lock_irqsave(&i8253_lock, flags);
+	/*
+	 * Although our caller may have the read side of xtime_lock,
+	 * this is now a seqlock, and we are cheating in this routine
+	 * by having side effects on state that we cannot undo if
+	 * there is a collision on the seqlock and our caller has to
+	 * retry.  (Namely, old_jifs and old_count.)  So we must treat
+	 * jiffies as volatile despite the lock.  We read jiffies
+	 * before latching the timer count to guarantee that although
+	 * the jiffies value might be older than the count (that is,
+	 * the counter may underflow between the last point where
+	 * jiffies was incremented and the point where we latch the
+	 * count), it cannot be newer.
+	 */
+	jifs = jiffies;
+	outb_pit(0x00, PIT_MODE);	/* latch the count ASAP */
+	count = inb_pit(PIT_CH0);	/* read the latched count */
+	count |= inb_pit(PIT_CH0) << 8;
+
+	/* VIA686a test code... reset the latch if count > max + 1 */
+	if (count > LATCH) {
+		outb_pit(0x34, PIT_MODE);
+		outb_pit(PIT_LATCH & 0xff, PIT_CH0);
+		outb_pit(PIT_LATCH >> 8, PIT_CH0);
+		count = PIT_LATCH - 1;
+	}
+
+	/*
+	 * It's possible for count to appear to go the wrong way for a
+	 * couple of reasons:
+	 *
+	 *  1. The timer counter underflows, but we haven't handled the
+	 *     resulting interrupt and incremented jiffies yet.
+	 *  2. Hardware problem with the timer, not giving us continuous time,
+	 *     the counter does small "jumps" upwards on some Pentium systems,
+	 *     (see c't 95/10 page 335 for Neptun bug.)
+	 *
+	 * Previous attempts to handle these cases intelligently were
+	 * buggy, so we just do the simple thing now.
+	 */
+	if (count > old_count && jifs == old_jifs)
+		count = old_count;
+
+	old_count = count;
+	old_jifs = jifs;
+
+	raw_spin_unlock_irqrestore(&i8253_lock, flags);
+
+	count = (PIT_LATCH - 1) - count;
+
+	return (cycle_t)(jifs * PIT_LATCH) + count;
+}
+
+static struct clocksource i8253_cs = {
+	.name		= "pit",
+	.rating		= 110,
+	.read		= i8253_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+};
+
+int __init clocksource_i8253_init(void)
+{
+	return clocksource_register_hz(&i8253_cs, PIT_TICK_RATE);
+}
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index ca8ee8093d6..9fb84853d8e 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -1,3 +1,5 @@
+menu "CPU Frequency scaling"
+
 config CPU_FREQ
 	bool "CPU Frequency scaling"
 	help
@@ -18,19 +20,6 @@ if CPU_FREQ
 config CPU_FREQ_TABLE
 	tristate
 
-config CPU_FREQ_DEBUG
-	bool "Enable CPUfreq debugging"
-	help
-	  Say Y here to enable CPUfreq subsystem (including drivers)
-	  debugging. You will need to activate it via the kernel
-	  command line by passing
-	     cpufreq.debug=<value>
-
-	  To get <value>, add 
-	       1 to activate CPUfreq core debugging,
-	       2 to activate CPUfreq drivers debugging, and
-	       4 to activate CPUfreq governor debugging
-
 config CPU_FREQ_STAT
 	tristate "CPU frequency translation statistics"
 	select CPU_FREQ_TABLE
@@ -190,4 +179,10 @@ config CPU_FREQ_GOV_CONSERVATIVE
 
 	  If in doubt, say N.
 
-endif	# CPU_FREQ
+menu "x86 CPU frequency scaling drivers"
+depends on X86
+source "drivers/cpufreq/Kconfig.x86"
+endmenu
+
+endif
+endmenu
diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86
new file mode 100644
index 00000000000..78ff7ee4895
--- /dev/null
+++ b/drivers/cpufreq/Kconfig.x86
@@ -0,0 +1,255 @@
+#
+# x86 CPU Frequency scaling drivers
+#
+
+config X86_PCC_CPUFREQ
+	tristate "Processor Clocking Control interface driver"
+	depends on ACPI && ACPI_PROCESSOR
+	help
+	  This driver adds support for the PCC interface.
+
+	  For details, take a look at:
+	  <file:Documentation/cpu-freq/pcc-cpufreq.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pcc-cpufreq.
+
+	  If in doubt, say N.
+
+config X86_ACPI_CPUFREQ
+	tristate "ACPI Processor P-States driver"
+	select CPU_FREQ_TABLE
+	depends on ACPI_PROCESSOR
+	help
+	  This driver adds a CPUFreq driver which utilizes the ACPI
+	  Processor Performance States.
+	  This driver also supports Intel Enhanced Speedstep.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called acpi-cpufreq.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config ELAN_CPUFREQ
+	tristate "AMD Elan SC400 and SC410"
+	select CPU_FREQ_TABLE
+	depends on MELAN
+	---help---
+	  This adds the CPUFreq driver for AMD Elan SC400 and SC410
+	  processors.
+
+	  You need to specify the processor maximum speed as boot
+	  parameter: elanfreq=maxspeed (in kHz) or as module
+	  parameter "max_freq".
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config SC520_CPUFREQ
+	tristate "AMD Elan SC520"
+	select CPU_FREQ_TABLE
+	depends on MELAN
+	---help---
+	  This adds the CPUFreq driver for AMD Elan SC520 processor.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+
+config X86_POWERNOW_K6
+	tristate "AMD Mobile K6-2/K6-3 PowerNow!"
+	select CPU_FREQ_TABLE
+	depends on X86_32
+	help
+	  This adds the CPUFreq driver for mobile AMD K6-2+ and mobile
+	  AMD K6-3+ processors.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_POWERNOW_K7
+	tristate "AMD Mobile Athlon/Duron PowerNow!"
+	select CPU_FREQ_TABLE
+	depends on X86_32
+	help
+	  This adds the CPUFreq driver for mobile AMD K7 mobile processors.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_POWERNOW_K7_ACPI
+	bool
+	depends on X86_POWERNOW_K7 && ACPI_PROCESSOR
+	depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m)
+	depends on X86_32
+	default y
+
+config X86_POWERNOW_K8
+	tristate "AMD Opteron/Athlon64 PowerNow!"
+	select CPU_FREQ_TABLE
+	depends on ACPI && ACPI_PROCESSOR
+	help
+	  This adds the CPUFreq driver for K8/K10 Opteron/Athlon64 processors.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called powernow-k8.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+config X86_GX_SUSPMOD
+	tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation"
+	depends on X86_32 && PCI
+	help
+	 This add the CPUFreq driver for NatSemi Geode processors which
+	 support suspend modulation.
+
+	 For details, take a look at <file:Documentation/cpu-freq/>.
+
+	 If in doubt, say N.
+
+config X86_SPEEDSTEP_CENTRINO
+	tristate "Intel Enhanced SpeedStep (deprecated)"
+	select CPU_FREQ_TABLE
+	select X86_SPEEDSTEP_CENTRINO_TABLE if X86_32
+	depends on X86_32 || (X86_64 && ACPI_PROCESSOR)
+	help
+	  This is deprecated and this functionality is now merged into
+	  acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of
+	  speedstep_centrino.
+	  This adds the CPUFreq driver for Enhanced SpeedStep enabled
+	  mobile CPUs.  This means Intel Pentium M (Centrino) CPUs
+	  or 64bit enabled Intel Xeons.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called speedstep-centrino.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_SPEEDSTEP_CENTRINO_TABLE
+	bool "Built-in tables for Banias CPUs"
+	depends on X86_32 && X86_SPEEDSTEP_CENTRINO
+	default y
+	help
+	  Use built-in tables for Banias CPUs if ACPI encoding
+	  is not available.
+
+	  If in doubt, say N.
+
+config X86_SPEEDSTEP_ICH
+	tristate "Intel Speedstep on ICH-M chipsets (ioport interface)"
+	select CPU_FREQ_TABLE
+	depends on X86_32
+	help
+	  This adds the CPUFreq driver for certain mobile Intel Pentium III
+	  (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all
+	  mobile Intel Pentium 4 P4-M on systems which have an Intel ICH2,
+	  ICH3 or ICH4 southbridge.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_SPEEDSTEP_SMI
+	tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)"
+	select CPU_FREQ_TABLE
+	depends on X86_32 && EXPERIMENTAL
+	help
+	  This adds the CPUFreq driver for certain mobile Intel Pentium III
+	  (Coppermine), all mobile Intel Pentium III-M (Tualatin)
+	  on systems which have an Intel 440BX/ZX/MX southbridge.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_P4_CLOCKMOD
+	tristate "Intel Pentium 4 clock modulation"
+	select CPU_FREQ_TABLE
+	help
+	  This adds the CPUFreq driver for Intel Pentium 4 / XEON
+	  processors.  When enabled it will lower CPU temperature by skipping
+	  clocks.
+
+	  This driver should be only used in exceptional
+	  circumstances when very low power is needed because it causes severe
+	  slowdowns and noticeable latencies.  Normally Speedstep should be used
+	  instead.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called p4-clockmod.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  Unless you are absolutely sure say N.
+
+config X86_CPUFREQ_NFORCE2
+	tristate "nVidia nForce2 FSB changing"
+	depends on X86_32 && EXPERIMENTAL
+	help
+	  This adds the CPUFreq driver for FSB changing on nVidia nForce2
+	  platforms.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_LONGRUN
+	tristate "Transmeta LongRun"
+	depends on X86_32
+	help
+	  This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors
+	  which support LongRun.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_LONGHAUL
+	tristate "VIA Cyrix III Longhaul"
+	select CPU_FREQ_TABLE
+	depends on X86_32 && ACPI_PROCESSOR
+	help
+	  This adds the CPUFreq driver for VIA Samuel/CyrixIII,
+	  VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T
+	  processors.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_E_POWERSAVER
+	tristate "VIA C7 Enhanced PowerSaver (DANGEROUS)"
+	select CPU_FREQ_TABLE
+	depends on X86_32 && EXPERIMENTAL
+	help
+	  This adds the CPUFreq driver for VIA C7 processors.  However, this driver
+	  does not have any safeguards to prevent operating the CPU out of spec
+	  and is thus considered dangerous.  Please use the regular ACPI cpufreq
+	  driver, enabled by CONFIG_X86_ACPI_CPUFREQ.
+
+	  If in doubt, say N.
+
+comment "shared options"
+
+config X86_SPEEDSTEP_LIB
+	tristate
+	default (X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD)
+
+config X86_SPEEDSTEP_RELAXED_CAP_CHECK
+	bool "Relaxed speedstep capability checks"
+	depends on X86_32 && (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH)
+	help
+	  Don't perform all checks for a speedstep capable system which would
+	  normally be done. Some ancient or strange systems, though speedstep
+	  capable, don't always indicate that they are speedstep capable. This
+	  option lets the probing code bypass some of those checks if the
+	  parameter "relaxed_check=1" is passed to the module.
+
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 71fc3b4173f..c7f1a6f16b6 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -13,3 +13,29 @@ obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE)	+= cpufreq_conservative.o
 # CPUfreq cross-arch helpers
 obj-$(CONFIG_CPU_FREQ_TABLE)		+= freq_table.o
 
+##################################################################################d
+# x86 drivers.
+# Link order matters. K8 is preferred to ACPI because of firmware bugs in early
+# K8 systems. ACPI is preferred to all other hardware-specific drivers.
+# speedstep-* is preferred over p4-clockmod.
+
+obj-$(CONFIG_X86_POWERNOW_K8)		+= powernow-k8.o mperf.o
+obj-$(CONFIG_X86_ACPI_CPUFREQ)		+= acpi-cpufreq.o mperf.o
+obj-$(CONFIG_X86_PCC_CPUFREQ)		+= pcc-cpufreq.o
+obj-$(CONFIG_X86_POWERNOW_K6)		+= powernow-k6.o
+obj-$(CONFIG_X86_POWERNOW_K7)		+= powernow-k7.o
+obj-$(CONFIG_X86_LONGHAUL)		+= longhaul.o
+obj-$(CONFIG_X86_E_POWERSAVER)		+= e_powersaver.o
+obj-$(CONFIG_ELAN_CPUFREQ)		+= elanfreq.o
+obj-$(CONFIG_SC520_CPUFREQ)		+= sc520_freq.o
+obj-$(CONFIG_X86_LONGRUN)		+= longrun.o
+obj-$(CONFIG_X86_GX_SUSPMOD)		+= gx-suspmod.o
+obj-$(CONFIG_X86_SPEEDSTEP_ICH)		+= speedstep-ich.o
+obj-$(CONFIG_X86_SPEEDSTEP_LIB)		+= speedstep-lib.o
+obj-$(CONFIG_X86_SPEEDSTEP_SMI)		+= speedstep-smi.o
+obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO)	+= speedstep-centrino.o
+obj-$(CONFIG_X86_P4_CLOCKMOD)		+= p4-clockmod.o
+obj-$(CONFIG_X86_CPUFREQ_NFORCE2)	+= cpufreq-nforce2.o
+
+##################################################################################d
+
diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c
new file mode 100644
index 00000000000..4e04e127438
--- /dev/null
+++ b/drivers/cpufreq/acpi-cpufreq.c
@@ -0,0 +1,773 @@
+/*
+ * acpi-cpufreq.c - ACPI Processor P-States Driver
+ *
+ *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
+ *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *  Copyright (C) 2002 - 2004 Dominik Brodowski <linux@brodo.de>
+ *  Copyright (C) 2006       Denis Sadykov <denis.m.sadykov@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or (at
+ *  your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/sched.h>
+#include <linux/cpufreq.h>
+#include <linux/compiler.h>
+#include <linux/dmi.h>
+#include <linux/slab.h>
+
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+
+#include <acpi/processor.h>
+
+#include <asm/msr.h>
+#include <asm/processor.h>
+#include <asm/cpufeature.h>
+#include "mperf.h"
+
+MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski");
+MODULE_DESCRIPTION("ACPI Processor P-States Driver");
+MODULE_LICENSE("GPL");
+
+enum {
+	UNDEFINED_CAPABLE = 0,
+	SYSTEM_INTEL_MSR_CAPABLE,
+	SYSTEM_IO_CAPABLE,
+};
+
+#define INTEL_MSR_RANGE		(0xffff)
+
+struct acpi_cpufreq_data {
+	struct acpi_processor_performance *acpi_data;
+	struct cpufreq_frequency_table *freq_table;
+	unsigned int resume;
+	unsigned int cpu_feature;
+};
+
+static DEFINE_PER_CPU(struct acpi_cpufreq_data *, acfreq_data);
+
+/* acpi_perf_data is a pointer to percpu data. */
+static struct acpi_processor_performance __percpu *acpi_perf_data;
+
+static struct cpufreq_driver acpi_cpufreq_driver;
+
+static unsigned int acpi_pstate_strict;
+
+static int check_est_cpu(unsigned int cpuid)
+{
+	struct cpuinfo_x86 *cpu = &cpu_data(cpuid);
+
+	return cpu_has(cpu, X86_FEATURE_EST);
+}
+
+static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data)
+{
+	struct acpi_processor_performance *perf;
+	int i;
+
+	perf = data->acpi_data;
+
+	for (i = 0; i < perf->state_count; i++) {
+		if (value == perf->states[i].status)
+			return data->freq_table[i].frequency;
+	}
+	return 0;
+}
+
+static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data)
+{
+	int i;
+	struct acpi_processor_performance *perf;
+
+	msr &= INTEL_MSR_RANGE;
+	perf = data->acpi_data;
+
+	for (i = 0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
+		if (msr == perf->states[data->freq_table[i].index].status)
+			return data->freq_table[i].frequency;
+	}
+	return data->freq_table[0].frequency;
+}
+
+static unsigned extract_freq(u32 val, struct acpi_cpufreq_data *data)
+{
+	switch (data->cpu_feature) {
+	case SYSTEM_INTEL_MSR_CAPABLE:
+		return extract_msr(val, data);
+	case SYSTEM_IO_CAPABLE:
+		return extract_io(val, data);
+	default:
+		return 0;
+	}
+}
+
+struct msr_addr {
+	u32 reg;
+};
+
+struct io_addr {
+	u16 port;
+	u8 bit_width;
+};
+
+struct drv_cmd {
+	unsigned int type;
+	const struct cpumask *mask;
+	union {
+		struct msr_addr msr;
+		struct io_addr io;
+	} addr;
+	u32 val;
+};
+
+/* Called via smp_call_function_single(), on the target CPU */
+static void do_drv_read(void *_cmd)
+{
+	struct drv_cmd *cmd = _cmd;
+	u32 h;
+
+	switch (cmd->type) {
+	case SYSTEM_INTEL_MSR_CAPABLE:
+		rdmsr(cmd->addr.msr.reg, cmd->val, h);
+		break;
+	case SYSTEM_IO_CAPABLE:
+		acpi_os_read_port((acpi_io_address)cmd->addr.io.port,
+				&cmd->val,
+				(u32)cmd->addr.io.bit_width);
+		break;
+	default:
+		break;
+	}
+}
+
+/* Called via smp_call_function_many(), on the target CPUs */
+static void do_drv_write(void *_cmd)
+{
+	struct drv_cmd *cmd = _cmd;
+	u32 lo, hi;
+
+	switch (cmd->type) {
+	case SYSTEM_INTEL_MSR_CAPABLE:
+		rdmsr(cmd->addr.msr.reg, lo, hi);
+		lo = (lo & ~INTEL_MSR_RANGE) | (cmd->val & INTEL_MSR_RANGE);
+		wrmsr(cmd->addr.msr.reg, lo, hi);
+		break;
+	case SYSTEM_IO_CAPABLE:
+		acpi_os_write_port((acpi_io_address)cmd->addr.io.port,
+				cmd->val,
+				(u32)cmd->addr.io.bit_width);
+		break;
+	default:
+		break;
+	}
+}
+
+static void drv_read(struct drv_cmd *cmd)
+{
+	int err;
+	cmd->val = 0;
+
+	err = smp_call_function_any(cmd->mask, do_drv_read, cmd, 1);
+	WARN_ON_ONCE(err);	/* smp_call_function_any() was buggy? */
+}
+
+static void drv_write(struct drv_cmd *cmd)
+{
+	int this_cpu;
+
+	this_cpu = get_cpu();
+	if (cpumask_test_cpu(this_cpu, cmd->mask))
+		do_drv_write(cmd);
+	smp_call_function_many(cmd->mask, do_drv_write, cmd, 1);
+	put_cpu();
+}
+
+static u32 get_cur_val(const struct cpumask *mask)
+{
+	struct acpi_processor_performance *perf;
+	struct drv_cmd cmd;
+
+	if (unlikely(cpumask_empty(mask)))
+		return 0;
+
+	switch (per_cpu(acfreq_data, cpumask_first(mask))->cpu_feature) {
+	case SYSTEM_INTEL_MSR_CAPABLE:
+		cmd.type = SYSTEM_INTEL_MSR_CAPABLE;
+		cmd.addr.msr.reg = MSR_IA32_PERF_STATUS;
+		break;
+	case SYSTEM_IO_CAPABLE:
+		cmd.type = SYSTEM_IO_CAPABLE;
+		perf = per_cpu(acfreq_data, cpumask_first(mask))->acpi_data;
+		cmd.addr.io.port = perf->control_register.address;
+		cmd.addr.io.bit_width = perf->control_register.bit_width;
+		break;
+	default:
+		return 0;
+	}
+
+	cmd.mask = mask;
+	drv_read(&cmd);
+
+	pr_debug("get_cur_val = %u\n", cmd.val);
+
+	return cmd.val;
+}
+
+static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
+{
+	struct acpi_cpufreq_data *data = per_cpu(acfreq_data, cpu);
+	unsigned int freq;
+	unsigned int cached_freq;
+
+	pr_debug("get_cur_freq_on_cpu (%d)\n", cpu);
+
+	if (unlikely(data == NULL ||
+		     data->acpi_data == NULL || data->freq_table == NULL)) {
+		return 0;
+	}
+
+	cached_freq = data->freq_table[data->acpi_data->state].frequency;
+	freq = extract_freq(get_cur_val(cpumask_of(cpu)), data);
+	if (freq != cached_freq) {
+		/*
+		 * The dreaded BIOS frequency change behind our back.
+		 * Force set the frequency on next target call.
+		 */
+		data->resume = 1;
+	}
+
+	pr_debug("cur freq = %u\n", freq);
+
+	return freq;
+}
+
+static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq,
+				struct acpi_cpufreq_data *data)
+{
+	unsigned int cur_freq;
+	unsigned int i;
+
+	for (i = 0; i < 100; i++) {
+		cur_freq = extract_freq(get_cur_val(mask), data);
+		if (cur_freq == freq)
+			return 1;
+		udelay(10);
+	}
+	return 0;
+}
+
+static int acpi_cpufreq_target(struct cpufreq_policy *policy,
+			       unsigned int target_freq, unsigned int relation)
+{
+	struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu);
+	struct acpi_processor_performance *perf;
+	struct cpufreq_freqs freqs;
+	struct drv_cmd cmd;
+	unsigned int next_state = 0; /* Index into freq_table */
+	unsigned int next_perf_state = 0; /* Index into perf table */
+	unsigned int i;
+	int result = 0;
+
+	pr_debug("acpi_cpufreq_target %d (%d)\n", target_freq, policy->cpu);
+
+	if (unlikely(data == NULL ||
+	     data->acpi_data == NULL || data->freq_table == NULL)) {
+		return -ENODEV;
+	}
+
+	perf = data->acpi_data;
+	result = cpufreq_frequency_table_target(policy,
+						data->freq_table,
+						target_freq,
+						relation, &next_state);
+	if (unlikely(result)) {
+		result = -ENODEV;
+		goto out;
+	}
+
+	next_perf_state = data->freq_table[next_state].index;
+	if (perf->state == next_perf_state) {
+		if (unlikely(data->resume)) {
+			pr_debug("Called after resume, resetting to P%d\n",
+				next_perf_state);
+			data->resume = 0;
+		} else {
+			pr_debug("Already at target state (P%d)\n",
+				next_perf_state);
+			goto out;
+		}
+	}
+
+	switch (data->cpu_feature) {
+	case SYSTEM_INTEL_MSR_CAPABLE:
+		cmd.type = SYSTEM_INTEL_MSR_CAPABLE;
+		cmd.addr.msr.reg = MSR_IA32_PERF_CTL;
+		cmd.val = (u32) perf->states[next_perf_state].control;
+		break;
+	case SYSTEM_IO_CAPABLE:
+		cmd.type = SYSTEM_IO_CAPABLE;
+		cmd.addr.io.port = perf->control_register.address;
+		cmd.addr.io.bit_width = perf->control_register.bit_width;
+		cmd.val = (u32) perf->states[next_perf_state].control;
+		break;
+	default:
+		result = -ENODEV;
+		goto out;
+	}
+
+	/* cpufreq holds the hotplug lock, so we are safe from here on */
+	if (policy->shared_type != CPUFREQ_SHARED_TYPE_ANY)
+		cmd.mask = policy->cpus;
+	else
+		cmd.mask = cpumask_of(policy->cpu);
+
+	freqs.old = perf->states[perf->state].core_frequency * 1000;
+	freqs.new = data->freq_table[next_state].frequency;
+	for_each_cpu(i, policy->cpus) {
+		freqs.cpu = i;
+		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	}
+
+	drv_write(&cmd);
+
+	if (acpi_pstate_strict) {
+		if (!check_freqs(cmd.mask, freqs.new, data)) {
+			pr_debug("acpi_cpufreq_target failed (%d)\n",
+				policy->cpu);
+			result = -EAGAIN;
+			goto out;
+		}
+	}
+
+	for_each_cpu(i, policy->cpus) {
+		freqs.cpu = i;
+		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	}
+	perf->state = next_perf_state;
+
+out:
+	return result;
+}
+
+static int acpi_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu);
+
+	pr_debug("acpi_cpufreq_verify\n");
+
+	return cpufreq_frequency_table_verify(policy, data->freq_table);
+}
+
+static unsigned long
+acpi_cpufreq_guess_freq(struct acpi_cpufreq_data *data, unsigned int cpu)
+{
+	struct acpi_processor_performance *perf = data->acpi_data;
+
+	if (cpu_khz) {
+		/* search the closest match to cpu_khz */
+		unsigned int i;
+		unsigned long freq;
+		unsigned long freqn = perf->states[0].core_frequency * 1000;
+
+		for (i = 0; i < (perf->state_count-1); i++) {
+			freq = freqn;
+			freqn = perf->states[i+1].core_frequency * 1000;
+			if ((2 * cpu_khz) > (freqn + freq)) {
+				perf->state = i;
+				return freq;
+			}
+		}
+		perf->state = perf->state_count-1;
+		return freqn;
+	} else {
+		/* assume CPU is at P0... */
+		perf->state = 0;
+		return perf->states[0].core_frequency * 1000;
+	}
+}
+
+static void free_acpi_perf_data(void)
+{
+	unsigned int i;
+
+	/* Freeing a NULL pointer is OK, and alloc_percpu zeroes. */
+	for_each_possible_cpu(i)
+		free_cpumask_var(per_cpu_ptr(acpi_perf_data, i)
+				 ->shared_cpu_map);
+	free_percpu(acpi_perf_data);
+}
+
+/*
+ * acpi_cpufreq_early_init - initialize ACPI P-States library
+ *
+ * Initialize the ACPI P-States library (drivers/acpi/processor_perflib.c)
+ * in order to determine correct frequency and voltage pairings. We can
+ * do _PDC and _PSD and find out the processor dependency for the
+ * actual init that will happen later...
+ */
+static int __init acpi_cpufreq_early_init(void)
+{
+	unsigned int i;
+	pr_debug("acpi_cpufreq_early_init\n");
+
+	acpi_perf_data = alloc_percpu(struct acpi_processor_performance);
+	if (!acpi_perf_data) {
+		pr_debug("Memory allocation error for acpi_perf_data.\n");
+		return -ENOMEM;
+	}
+	for_each_possible_cpu(i) {
+		if (!zalloc_cpumask_var_node(
+			&per_cpu_ptr(acpi_perf_data, i)->shared_cpu_map,
+			GFP_KERNEL, cpu_to_node(i))) {
+
+			/* Freeing a NULL pointer is OK: alloc_percpu zeroes. */
+			free_acpi_perf_data();
+			return -ENOMEM;
+		}
+	}
+
+	/* Do initialization in ACPI core */
+	acpi_processor_preregister_performance(acpi_perf_data);
+	return 0;
+}
+
+#ifdef CONFIG_SMP
+/*
+ * Some BIOSes do SW_ANY coordination internally, either set it up in hw
+ * or do it in BIOS firmware and won't inform about it to OS. If not
+ * detected, this has a side effect of making CPU run at a different speed
+ * than OS intended it to run at. Detect it and handle it cleanly.
+ */
+static int bios_with_sw_any_bug;
+
+static int sw_any_bug_found(const struct dmi_system_id *d)
+{
+	bios_with_sw_any_bug = 1;
+	return 0;
+}
+
+static const struct dmi_system_id sw_any_bug_dmi_table[] = {
+	{
+		.callback = sw_any_bug_found,
+		.ident = "Supermicro Server X6DLP",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"),
+			DMI_MATCH(DMI_BIOS_VERSION, "080010"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X6DLP"),
+		},
+	},
+	{ }
+};
+
+static int acpi_cpufreq_blacklist(struct cpuinfo_x86 *c)
+{
+	/* Intel Xeon Processor 7100 Series Specification Update
+	 * http://www.intel.com/Assets/PDF/specupdate/314554.pdf
+	 * AL30: A Machine Check Exception (MCE) Occurring during an
+	 * Enhanced Intel SpeedStep Technology Ratio Change May Cause
+	 * Both Processor Cores to Lock Up. */
+	if (c->x86_vendor == X86_VENDOR_INTEL) {
+		if ((c->x86 == 15) &&
+		    (c->x86_model == 6) &&
+		    (c->x86_mask == 8)) {
+			printk(KERN_INFO "acpi-cpufreq: Intel(R) "
+			    "Xeon(R) 7100 Errata AL30, processors may "
+			    "lock up on frequency changes: disabling "
+			    "acpi-cpufreq.\n");
+			return -ENODEV;
+		    }
+		}
+	return 0;
+}
+#endif
+
+static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned int i;
+	unsigned int valid_states = 0;
+	unsigned int cpu = policy->cpu;
+	struct acpi_cpufreq_data *data;
+	unsigned int result = 0;
+	struct cpuinfo_x86 *c = &cpu_data(policy->cpu);
+	struct acpi_processor_performance *perf;
+#ifdef CONFIG_SMP
+	static int blacklisted;
+#endif
+
+	pr_debug("acpi_cpufreq_cpu_init\n");
+
+#ifdef CONFIG_SMP
+	if (blacklisted)
+		return blacklisted;
+	blacklisted = acpi_cpufreq_blacklist(c);
+	if (blacklisted)
+		return blacklisted;
+#endif
+
+	data = kzalloc(sizeof(struct acpi_cpufreq_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->acpi_data = per_cpu_ptr(acpi_perf_data, cpu);
+	per_cpu(acfreq_data, cpu) = data;
+
+	if (cpu_has(c, X86_FEATURE_CONSTANT_TSC))
+		acpi_cpufreq_driver.flags |= CPUFREQ_CONST_LOOPS;
+
+	result = acpi_processor_register_performance(data->acpi_data, cpu);
+	if (result)
+		goto err_free;
+
+	perf = data->acpi_data;
+	policy->shared_type = perf->shared_type;
+
+	/*
+	 * Will let policy->cpus know about dependency only when software
+	 * coordination is required.
+	 */
+	if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL ||
+	    policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) {
+		cpumask_copy(policy->cpus, perf->shared_cpu_map);
+	}
+	cpumask_copy(policy->related_cpus, perf->shared_cpu_map);
+
+#ifdef CONFIG_SMP
+	dmi_check_system(sw_any_bug_dmi_table);
+	if (bios_with_sw_any_bug && cpumask_weight(policy->cpus) == 1) {
+		policy->shared_type = CPUFREQ_SHARED_TYPE_ALL;
+		cpumask_copy(policy->cpus, cpu_core_mask(cpu));
+	}
+#endif
+
+	/* capability check */
+	if (perf->state_count <= 1) {
+		pr_debug("No P-States\n");
+		result = -ENODEV;
+		goto err_unreg;
+	}
+
+	if (perf->control_register.space_id != perf->status_register.space_id) {
+		result = -ENODEV;
+		goto err_unreg;
+	}
+
+	switch (perf->control_register.space_id) {
+	case ACPI_ADR_SPACE_SYSTEM_IO:
+		pr_debug("SYSTEM IO addr space\n");
+		data->cpu_feature = SYSTEM_IO_CAPABLE;
+		break;
+	case ACPI_ADR_SPACE_FIXED_HARDWARE:
+		pr_debug("HARDWARE addr space\n");
+		if (!check_est_cpu(cpu)) {
+			result = -ENODEV;
+			goto err_unreg;
+		}
+		data->cpu_feature = SYSTEM_INTEL_MSR_CAPABLE;
+		break;
+	default:
+		pr_debug("Unknown addr space %d\n",
+			(u32) (perf->control_register.space_id));
+		result = -ENODEV;
+		goto err_unreg;
+	}
+
+	data->freq_table = kmalloc(sizeof(struct cpufreq_frequency_table) *
+		    (perf->state_count+1), GFP_KERNEL);
+	if (!data->freq_table) {
+		result = -ENOMEM;
+		goto err_unreg;
+	}
+
+	/* detect transition latency */
+	policy->cpuinfo.transition_latency = 0;
+	for (i = 0; i < perf->state_count; i++) {
+		if ((perf->states[i].transition_latency * 1000) >
+		    policy->cpuinfo.transition_latency)
+			policy->cpuinfo.transition_latency =
+			    perf->states[i].transition_latency * 1000;
+	}
+
+	/* Check for high latency (>20uS) from buggy BIOSes, like on T42 */
+	if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE &&
+	    policy->cpuinfo.transition_latency > 20 * 1000) {
+		policy->cpuinfo.transition_latency = 20 * 1000;
+		printk_once(KERN_INFO
+			    "P-state transition latency capped at 20 uS\n");
+	}
+
+	/* table init */
+	for (i = 0; i < perf->state_count; i++) {
+		if (i > 0 && perf->states[i].core_frequency >=
+		    data->freq_table[valid_states-1].frequency / 1000)
+			continue;
+
+		data->freq_table[valid_states].index = i;
+		data->freq_table[valid_states].frequency =
+		    perf->states[i].core_frequency * 1000;
+		valid_states++;
+	}
+	data->freq_table[valid_states].frequency = CPUFREQ_TABLE_END;
+	perf->state = 0;
+
+	result = cpufreq_frequency_table_cpuinfo(policy, data->freq_table);
+	if (result)
+		goto err_freqfree;
+
+	if (perf->states[0].core_frequency * 1000 != policy->cpuinfo.max_freq)
+		printk(KERN_WARNING FW_WARN "P-state 0 is not max freq\n");
+
+	switch (perf->control_register.space_id) {
+	case ACPI_ADR_SPACE_SYSTEM_IO:
+		/* Current speed is unknown and not detectable by IO port */
+		policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu);
+		break;
+	case ACPI_ADR_SPACE_FIXED_HARDWARE:
+		acpi_cpufreq_driver.get = get_cur_freq_on_cpu;
+		policy->cur = get_cur_freq_on_cpu(cpu);
+		break;
+	default:
+		break;
+	}
+
+	/* notify BIOS that we exist */
+	acpi_processor_notify_smm(THIS_MODULE);
+
+	/* Check for APERF/MPERF support in hardware */
+	if (cpu_has(c, X86_FEATURE_APERFMPERF))
+		acpi_cpufreq_driver.getavg = cpufreq_get_measured_perf;
+
+	pr_debug("CPU%u - ACPI performance management activated.\n", cpu);
+	for (i = 0; i < perf->state_count; i++)
+		pr_debug("     %cP%d: %d MHz, %d mW, %d uS\n",
+			(i == perf->state ? '*' : ' '), i,
+			(u32) perf->states[i].core_frequency,
+			(u32) perf->states[i].power,
+			(u32) perf->states[i].transition_latency);
+
+	cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu);
+
+	/*
+	 * the first call to ->target() should result in us actually
+	 * writing something to the appropriate registers.
+	 */
+	data->resume = 1;
+
+	return result;
+
+err_freqfree:
+	kfree(data->freq_table);
+err_unreg:
+	acpi_processor_unregister_performance(perf, cpu);
+err_free:
+	kfree(data);
+	per_cpu(acfreq_data, cpu) = NULL;
+
+	return result;
+}
+
+static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+	struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu);
+
+	pr_debug("acpi_cpufreq_cpu_exit\n");
+
+	if (data) {
+		cpufreq_frequency_table_put_attr(policy->cpu);
+		per_cpu(acfreq_data, policy->cpu) = NULL;
+		acpi_processor_unregister_performance(data->acpi_data,
+						      policy->cpu);
+		kfree(data->freq_table);
+		kfree(data);
+	}
+
+	return 0;
+}
+
+static int acpi_cpufreq_resume(struct cpufreq_policy *policy)
+{
+	struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu);
+
+	pr_debug("acpi_cpufreq_resume\n");
+
+	data->resume = 1;
+
+	return 0;
+}
+
+static struct freq_attr *acpi_cpufreq_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver acpi_cpufreq_driver = {
+	.verify		= acpi_cpufreq_verify,
+	.target		= acpi_cpufreq_target,
+	.bios_limit	= acpi_processor_get_bios_limit,
+	.init		= acpi_cpufreq_cpu_init,
+	.exit		= acpi_cpufreq_cpu_exit,
+	.resume		= acpi_cpufreq_resume,
+	.name		= "acpi-cpufreq",
+	.owner		= THIS_MODULE,
+	.attr		= acpi_cpufreq_attr,
+};
+
+static int __init acpi_cpufreq_init(void)
+{
+	int ret;
+
+	if (acpi_disabled)
+		return 0;
+
+	pr_debug("acpi_cpufreq_init\n");
+
+	ret = acpi_cpufreq_early_init();
+	if (ret)
+		return ret;
+
+	ret = cpufreq_register_driver(&acpi_cpufreq_driver);
+	if (ret)
+		free_acpi_perf_data();
+
+	return ret;
+}
+
+static void __exit acpi_cpufreq_exit(void)
+{
+	pr_debug("acpi_cpufreq_exit\n");
+
+	cpufreq_unregister_driver(&acpi_cpufreq_driver);
+
+	free_percpu(acpi_perf_data);
+}
+
+module_param(acpi_pstate_strict, uint, 0644);
+MODULE_PARM_DESC(acpi_pstate_strict,
+	"value 0 or non-zero. non-zero -> strict ACPI checks are "
+	"performed during frequency changes.");
+
+late_initcall(acpi_cpufreq_init);
+module_exit(acpi_cpufreq_exit);
+
+MODULE_ALIAS("acpi");
diff --git a/drivers/cpufreq/cpufreq-nforce2.c b/drivers/cpufreq/cpufreq-nforce2.c
new file mode 100644
index 00000000000..7bac808804f
--- /dev/null
+++ b/drivers/cpufreq/cpufreq-nforce2.c
@@ -0,0 +1,444 @@
+/*
+ * (C) 2004-2006  Sebastian Witt <se.witt@gmx.net>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *  Based upon reverse engineered information
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#define NFORCE2_XTAL 25
+#define NFORCE2_BOOTFSB 0x48
+#define NFORCE2_PLLENABLE 0xa8
+#define NFORCE2_PLLREG 0xa4
+#define NFORCE2_PLLADR 0xa0
+#define NFORCE2_PLL(mul, div) (0x100000 | (mul << 8) | div)
+
+#define NFORCE2_MIN_FSB 50
+#define NFORCE2_SAFE_DISTANCE 50
+
+/* Delay in ms between FSB changes */
+/* #define NFORCE2_DELAY 10 */
+
+/*
+ * nforce2_chipset:
+ * FSB is changed using the chipset
+ */
+static struct pci_dev *nforce2_dev;
+
+/* fid:
+ * multiplier * 10
+ */
+static int fid;
+
+/* min_fsb, max_fsb:
+ * minimum and maximum FSB (= FSB at boot time)
+ */
+static int min_fsb;
+static int max_fsb;
+
+MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>");
+MODULE_DESCRIPTION("nForce2 FSB changing cpufreq driver");
+MODULE_LICENSE("GPL");
+
+module_param(fid, int, 0444);
+module_param(min_fsb, int, 0444);
+
+MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)");
+MODULE_PARM_DESC(min_fsb,
+		"Minimum FSB to use, if not defined: current FSB - 50");
+
+#define PFX "cpufreq-nforce2: "
+
+/**
+ * nforce2_calc_fsb - calculate FSB
+ * @pll: PLL value
+ *
+ *   Calculates FSB from PLL value
+ */
+static int nforce2_calc_fsb(int pll)
+{
+	unsigned char mul, div;
+
+	mul = (pll >> 8) & 0xff;
+	div = pll & 0xff;
+
+	if (div > 0)
+		return NFORCE2_XTAL * mul / div;
+
+	return 0;
+}
+
+/**
+ * nforce2_calc_pll - calculate PLL value
+ * @fsb: FSB
+ *
+ *   Calculate PLL value for given FSB
+ */
+static int nforce2_calc_pll(unsigned int fsb)
+{
+	unsigned char xmul, xdiv;
+	unsigned char mul = 0, div = 0;
+	int tried = 0;
+
+	/* Try to calculate multiplier and divider up to 4 times */
+	while (((mul == 0) || (div == 0)) && (tried <= 3)) {
+		for (xdiv = 2; xdiv <= 0x80; xdiv++)
+			for (xmul = 1; xmul <= 0xfe; xmul++)
+				if (nforce2_calc_fsb(NFORCE2_PLL(xmul, xdiv)) ==
+				    fsb + tried) {
+					mul = xmul;
+					div = xdiv;
+				}
+		tried++;
+	}
+
+	if ((mul == 0) || (div == 0))
+		return -1;
+
+	return NFORCE2_PLL(mul, div);
+}
+
+/**
+ * nforce2_write_pll - write PLL value to chipset
+ * @pll: PLL value
+ *
+ *   Writes new FSB PLL value to chipset
+ */
+static void nforce2_write_pll(int pll)
+{
+	int temp;
+
+	/* Set the pll addr. to 0x00 */
+	pci_write_config_dword(nforce2_dev, NFORCE2_PLLADR, 0);
+
+	/* Now write the value in all 64 registers */
+	for (temp = 0; temp <= 0x3f; temp++)
+		pci_write_config_dword(nforce2_dev, NFORCE2_PLLREG, pll);
+
+	return;
+}
+
+/**
+ * nforce2_fsb_read - Read FSB
+ *
+ *   Read FSB from chipset
+ *   If bootfsb != 0, return FSB at boot-time
+ */
+static unsigned int nforce2_fsb_read(int bootfsb)
+{
+	struct pci_dev *nforce2_sub5;
+	u32 fsb, temp = 0;
+
+	/* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */
+	nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, 0x01EF,
+				PCI_ANY_ID, PCI_ANY_ID, NULL);
+	if (!nforce2_sub5)
+		return 0;
+
+	pci_read_config_dword(nforce2_sub5, NFORCE2_BOOTFSB, &fsb);
+	fsb /= 1000000;
+
+	/* Check if PLL register is already set */
+	pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp);
+
+	if (bootfsb || !temp)
+		return fsb;
+
+	/* Use PLL register FSB value */
+	pci_read_config_dword(nforce2_dev, NFORCE2_PLLREG, &temp);
+	fsb = nforce2_calc_fsb(temp);
+
+	return fsb;
+}
+
+/**
+ * nforce2_set_fsb - set new FSB
+ * @fsb: New FSB
+ *
+ *   Sets new FSB
+ */
+static int nforce2_set_fsb(unsigned int fsb)
+{
+	u32 temp = 0;
+	unsigned int tfsb;
+	int diff;
+	int pll = 0;
+
+	if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) {
+		printk(KERN_ERR PFX "FSB %d is out of range!\n", fsb);
+		return -EINVAL;
+	}
+
+	tfsb = nforce2_fsb_read(0);
+	if (!tfsb) {
+		printk(KERN_ERR PFX "Error while reading the FSB\n");
+		return -EINVAL;
+	}
+
+	/* First write? Then set actual value */
+	pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp);
+	if (!temp) {
+		pll = nforce2_calc_pll(tfsb);
+
+		if (pll < 0)
+			return -EINVAL;
+
+		nforce2_write_pll(pll);
+	}
+
+	/* Enable write access */
+	temp = 0x01;
+	pci_write_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8)temp);
+
+	diff = tfsb - fsb;
+
+	if (!diff)
+		return 0;
+
+	while ((tfsb != fsb) && (tfsb <= max_fsb) && (tfsb >= min_fsb)) {
+		if (diff < 0)
+			tfsb++;
+		else
+			tfsb--;
+
+		/* Calculate the PLL reg. value */
+		pll = nforce2_calc_pll(tfsb);
+		if (pll == -1)
+			return -EINVAL;
+
+		nforce2_write_pll(pll);
+#ifdef NFORCE2_DELAY
+		mdelay(NFORCE2_DELAY);
+#endif
+	}
+
+	temp = 0x40;
+	pci_write_config_byte(nforce2_dev, NFORCE2_PLLADR, (u8)temp);
+
+	return 0;
+}
+
+/**
+ * nforce2_get - get the CPU frequency
+ * @cpu: CPU number
+ *
+ * Returns the CPU frequency
+ */
+static unsigned int nforce2_get(unsigned int cpu)
+{
+	if (cpu)
+		return 0;
+	return nforce2_fsb_read(0) * fid * 100;
+}
+
+/**
+ * nforce2_target - set a new CPUFreq policy
+ * @policy: new policy
+ * @target_freq: the target frequency
+ * @relation: how that frequency relates to achieved frequency
+ *  (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ *
+ * Sets a new CPUFreq policy.
+ */
+static int nforce2_target(struct cpufreq_policy *policy,
+			  unsigned int target_freq, unsigned int relation)
+{
+/*        unsigned long         flags; */
+	struct cpufreq_freqs freqs;
+	unsigned int target_fsb;
+
+	if ((target_freq > policy->max) || (target_freq < policy->min))
+		return -EINVAL;
+
+	target_fsb = target_freq / (fid * 100);
+
+	freqs.old = nforce2_get(policy->cpu);
+	freqs.new = target_fsb * fid * 100;
+	freqs.cpu = 0;		/* Only one CPU on nForce2 platforms */
+
+	if (freqs.old == freqs.new)
+		return 0;
+
+	pr_debug("Old CPU frequency %d kHz, new %d kHz\n",
+	       freqs.old, freqs.new);
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	/* Disable IRQs */
+	/* local_irq_save(flags); */
+
+	if (nforce2_set_fsb(target_fsb) < 0)
+		printk(KERN_ERR PFX "Changing FSB to %d failed\n",
+			target_fsb);
+	else
+		pr_debug("Changed FSB successfully to %d\n",
+			target_fsb);
+
+	/* Enable IRQs */
+	/* local_irq_restore(flags); */
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	return 0;
+}
+
+/**
+ * nforce2_verify - verifies a new CPUFreq policy
+ * @policy: new policy
+ */
+static int nforce2_verify(struct cpufreq_policy *policy)
+{
+	unsigned int fsb_pol_max;
+
+	fsb_pol_max = policy->max / (fid * 100);
+
+	if (policy->min < (fsb_pol_max * fid * 100))
+		policy->max = (fsb_pol_max + 1) * fid * 100;
+
+	cpufreq_verify_within_limits(policy,
+				     policy->cpuinfo.min_freq,
+				     policy->cpuinfo.max_freq);
+	return 0;
+}
+
+static int nforce2_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned int fsb;
+	unsigned int rfid;
+
+	/* capability check */
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	/* Get current FSB */
+	fsb = nforce2_fsb_read(0);
+
+	if (!fsb)
+		return -EIO;
+
+	/* FIX: Get FID from CPU */
+	if (!fid) {
+		if (!cpu_khz) {
+			printk(KERN_WARNING PFX
+			"cpu_khz not set, can't calculate multiplier!\n");
+			return -ENODEV;
+		}
+
+		fid = cpu_khz / (fsb * 100);
+		rfid = fid % 5;
+
+		if (rfid) {
+			if (rfid > 2)
+				fid += 5 - rfid;
+			else
+				fid -= rfid;
+		}
+	}
+
+	printk(KERN_INFO PFX "FSB currently at %i MHz, FID %d.%d\n", fsb,
+	       fid / 10, fid % 10);
+
+	/* Set maximum FSB to FSB at boot time */
+	max_fsb = nforce2_fsb_read(1);
+
+	if (!max_fsb)
+		return -EIO;
+
+	if (!min_fsb)
+		min_fsb = max_fsb - NFORCE2_SAFE_DISTANCE;
+
+	if (min_fsb < NFORCE2_MIN_FSB)
+		min_fsb = NFORCE2_MIN_FSB;
+
+	/* cpuinfo and default policy values */
+	policy->cpuinfo.min_freq = min_fsb * fid * 100;
+	policy->cpuinfo.max_freq = max_fsb * fid * 100;
+	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	policy->cur = nforce2_get(policy->cpu);
+	policy->min = policy->cpuinfo.min_freq;
+	policy->max = policy->cpuinfo.max_freq;
+
+	return 0;
+}
+
+static int nforce2_cpu_exit(struct cpufreq_policy *policy)
+{
+	return 0;
+}
+
+static struct cpufreq_driver nforce2_driver = {
+	.name = "nforce2",
+	.verify = nforce2_verify,
+	.target = nforce2_target,
+	.get = nforce2_get,
+	.init = nforce2_cpu_init,
+	.exit = nforce2_cpu_exit,
+	.owner = THIS_MODULE,
+};
+
+/**
+ * nforce2_detect_chipset - detect the Southbridge which contains FSB PLL logic
+ *
+ * Detects nForce2 A2 and C1 stepping
+ *
+ */
+static int nforce2_detect_chipset(void)
+{
+	nforce2_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
+					PCI_DEVICE_ID_NVIDIA_NFORCE2,
+					PCI_ANY_ID, PCI_ANY_ID, NULL);
+
+	if (nforce2_dev == NULL)
+		return -ENODEV;
+
+	printk(KERN_INFO PFX "Detected nForce2 chipset revision %X\n",
+	       nforce2_dev->revision);
+	printk(KERN_INFO PFX
+	       "FSB changing is maybe unstable and can lead to "
+	       "crashes and data loss.\n");
+
+	return 0;
+}
+
+/**
+ * nforce2_init - initializes the nForce2 CPUFreq driver
+ *
+ * Initializes the nForce2 FSB support. Returns -ENODEV on unsupported
+ * devices, -EINVAL on problems during initiatization, and zero on
+ * success.
+ */
+static int __init nforce2_init(void)
+{
+	/* TODO: do we need to detect the processor? */
+
+	/* detect chipset */
+	if (nforce2_detect_chipset()) {
+		printk(KERN_INFO PFX "No nForce2 chipset.\n");
+		return -ENODEV;
+	}
+
+	return cpufreq_register_driver(&nforce2_driver);
+}
+
+/**
+ * nforce2_exit - unregisters cpufreq module
+ *
+ *   Unregisters nForce2 FSB change support.
+ */
+static void __exit nforce2_exit(void)
+{
+	cpufreq_unregister_driver(&nforce2_driver);
+}
+
+module_init(nforce2_init);
+module_exit(nforce2_exit);
+
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 2dafc5c38ae..0a5bea9e358 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -32,9 +32,6 @@
 
 #include <trace/events/power.h>
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, \
-						"cpufreq-core", msg)
-
 /**
  * The "cpufreq driver" - the arch- or hardware-dependent low
  * level driver of CPUFreq support, and its spinlock. This lock
@@ -181,93 +178,6 @@ EXPORT_SYMBOL_GPL(cpufreq_cpu_put);
 
 
 /*********************************************************************
- *                     UNIFIED DEBUG HELPERS                         *
- *********************************************************************/
-#ifdef CONFIG_CPU_FREQ_DEBUG
-
-/* what part(s) of the CPUfreq subsystem are debugged? */
-static unsigned int debug;
-
-/* is the debug output ratelimit'ed using printk_ratelimit? User can
- * set or modify this value.
- */
-static unsigned int debug_ratelimit = 1;
-
-/* is the printk_ratelimit'ing enabled? It's enabled after a successful
- * loading of a cpufreq driver, temporarily disabled when a new policy
- * is set, and disabled upon cpufreq driver removal
- */
-static unsigned int disable_ratelimit = 1;
-static DEFINE_SPINLOCK(disable_ratelimit_lock);
-
-static void cpufreq_debug_enable_ratelimit(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&disable_ratelimit_lock, flags);
-	if (disable_ratelimit)
-		disable_ratelimit--;
-	spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
-}
-
-static void cpufreq_debug_disable_ratelimit(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&disable_ratelimit_lock, flags);
-	disable_ratelimit++;
-	spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
-}
-
-void cpufreq_debug_printk(unsigned int type, const char *prefix,
-			const char *fmt, ...)
-{
-	char s[256];
-	va_list args;
-	unsigned int len;
-	unsigned long flags;
-
-	WARN_ON(!prefix);
-	if (type & debug) {
-		spin_lock_irqsave(&disable_ratelimit_lock, flags);
-		if (!disable_ratelimit && debug_ratelimit
-					&& !printk_ratelimit()) {
-			spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
-			return;
-		}
-		spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
-
-		len = snprintf(s, 256, KERN_DEBUG "%s: ", prefix);
-
-		va_start(args, fmt);
-		len += vsnprintf(&s[len], (256 - len), fmt, args);
-		va_end(args);
-
-		printk(s);
-
-		WARN_ON(len < 5);
-	}
-}
-EXPORT_SYMBOL(cpufreq_debug_printk);
-
-
-module_param(debug, uint, 0644);
-MODULE_PARM_DESC(debug, "CPUfreq debugging: add 1 to debug core,"
-			" 2 to debug drivers, and 4 to debug governors.");
-
-module_param(debug_ratelimit, uint, 0644);
-MODULE_PARM_DESC(debug_ratelimit, "CPUfreq debugging:"
-					" set to 0 to disable ratelimiting.");
-
-#else /* !CONFIG_CPU_FREQ_DEBUG */
-
-static inline void cpufreq_debug_enable_ratelimit(void) { return; }
-static inline void cpufreq_debug_disable_ratelimit(void) { return; }
-
-#endif /* CONFIG_CPU_FREQ_DEBUG */
-
-
-/*********************************************************************
  *            EXTERNALLY AFFECTING FREQUENCY CHANGES                 *
  *********************************************************************/
 
@@ -291,7 +201,7 @@ static void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci)
 	if (!l_p_j_ref_freq) {
 		l_p_j_ref = loops_per_jiffy;
 		l_p_j_ref_freq = ci->old;
-		dprintk("saving %lu as reference value for loops_per_jiffy; "
+		pr_debug("saving %lu as reference value for loops_per_jiffy; "
 			"freq is %u kHz\n", l_p_j_ref, l_p_j_ref_freq);
 	}
 	if ((val == CPUFREQ_PRECHANGE  && ci->old < ci->new) ||
@@ -299,7 +209,7 @@ static void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci)
 	    (val == CPUFREQ_RESUMECHANGE || val == CPUFREQ_SUSPENDCHANGE)) {
 		loops_per_jiffy = cpufreq_scale(l_p_j_ref, l_p_j_ref_freq,
 								ci->new);
-		dprintk("scaling loops_per_jiffy to %lu "
+		pr_debug("scaling loops_per_jiffy to %lu "
 			"for frequency %u kHz\n", loops_per_jiffy, ci->new);
 	}
 }
@@ -326,7 +236,7 @@ void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state)
 	BUG_ON(irqs_disabled());
 
 	freqs->flags = cpufreq_driver->flags;
-	dprintk("notification %u of frequency transition to %u kHz\n",
+	pr_debug("notification %u of frequency transition to %u kHz\n",
 		state, freqs->new);
 
 	policy = per_cpu(cpufreq_cpu_data, freqs->cpu);
@@ -340,7 +250,7 @@ void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state)
 		if (!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
 			if ((policy) && (policy->cpu == freqs->cpu) &&
 			    (policy->cur) && (policy->cur != freqs->old)) {
-				dprintk("Warning: CPU frequency is"
+				pr_debug("Warning: CPU frequency is"
 					" %u, cpufreq assumed %u kHz.\n",
 					freqs->old, policy->cur);
 				freqs->old = policy->cur;
@@ -353,7 +263,7 @@ void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state)
 
 	case CPUFREQ_POSTCHANGE:
 		adjust_jiffies(CPUFREQ_POSTCHANGE, freqs);
-		dprintk("FREQ: %lu - CPU: %lu", (unsigned long)freqs->new,
+		pr_debug("FREQ: %lu - CPU: %lu", (unsigned long)freqs->new,
 			(unsigned long)freqs->cpu);
 		trace_power_frequency(POWER_PSTATE, freqs->new, freqs->cpu);
 		trace_cpu_frequency(freqs->new, freqs->cpu);
@@ -411,21 +321,14 @@ static int cpufreq_parse_governor(char *str_governor, unsigned int *policy,
 		t = __find_governor(str_governor);
 
 		if (t == NULL) {
-			char *name = kasprintf(GFP_KERNEL, "cpufreq_%s",
-								str_governor);
-
-			if (name) {
-				int ret;
+			int ret;
 
-				mutex_unlock(&cpufreq_governor_mutex);
-				ret = request_module("%s", name);
-				mutex_lock(&cpufreq_governor_mutex);
+			mutex_unlock(&cpufreq_governor_mutex);
+			ret = request_module("cpufreq_%s", str_governor);
+			mutex_lock(&cpufreq_governor_mutex);
 
-				if (ret == 0)
-					t = __find_governor(str_governor);
-			}
-
-			kfree(name);
+			if (ret == 0)
+				t = __find_governor(str_governor);
 		}
 
 		if (t != NULL) {
@@ -753,7 +656,7 @@ no_policy:
 static void cpufreq_sysfs_release(struct kobject *kobj)
 {
 	struct cpufreq_policy *policy = to_policy(kobj);
-	dprintk("last reference is dropped\n");
+	pr_debug("last reference is dropped\n");
 	complete(&policy->kobj_unregister);
 }
 
@@ -788,7 +691,7 @@ static int cpufreq_add_dev_policy(unsigned int cpu,
 	gov = __find_governor(per_cpu(cpufreq_cpu_governor, cpu));
 	if (gov) {
 		policy->governor = gov;
-		dprintk("Restoring governor %s for cpu %d\n",
+		pr_debug("Restoring governor %s for cpu %d\n",
 		       policy->governor->name, cpu);
 	}
 #endif
@@ -824,7 +727,7 @@ static int cpufreq_add_dev_policy(unsigned int cpu,
 			per_cpu(cpufreq_cpu_data, cpu) = managed_policy;
 			spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
 
-			dprintk("CPU already managed, adding link\n");
+			pr_debug("CPU already managed, adding link\n");
 			ret = sysfs_create_link(&sys_dev->kobj,
 						&managed_policy->kobj,
 						"cpufreq");
@@ -865,7 +768,7 @@ static int cpufreq_add_dev_symlink(unsigned int cpu,
 		if (!cpu_online(j))
 			continue;
 
-		dprintk("CPU %u already managed, adding link\n", j);
+		pr_debug("CPU %u already managed, adding link\n", j);
 		managed_policy = cpufreq_cpu_get(cpu);
 		cpu_sys_dev = get_cpu_sysdev(j);
 		ret = sysfs_create_link(&cpu_sys_dev->kobj, &policy->kobj,
@@ -941,7 +844,7 @@ static int cpufreq_add_dev_interface(unsigned int cpu,
 	policy->user_policy.governor = policy->governor;
 
 	if (ret) {
-		dprintk("setting policy failed\n");
+		pr_debug("setting policy failed\n");
 		if (cpufreq_driver->exit)
 			cpufreq_driver->exit(policy);
 	}
@@ -977,8 +880,7 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 	if (cpu_is_offline(cpu))
 		return 0;
 
-	cpufreq_debug_disable_ratelimit();
-	dprintk("adding CPU %u\n", cpu);
+	pr_debug("adding CPU %u\n", cpu);
 
 #ifdef CONFIG_SMP
 	/* check whether a different CPU already registered this
@@ -986,7 +888,6 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 	policy = cpufreq_cpu_get(cpu);
 	if (unlikely(policy)) {
 		cpufreq_cpu_put(policy);
-		cpufreq_debug_enable_ratelimit();
 		return 0;
 	}
 #endif
@@ -1037,7 +938,7 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 	 */
 	ret = cpufreq_driver->init(policy);
 	if (ret) {
-		dprintk("initialization failed\n");
+		pr_debug("initialization failed\n");
 		goto err_unlock_policy;
 	}
 	policy->user_policy.min = policy->min;
@@ -1063,8 +964,7 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 
 	kobject_uevent(&policy->kobj, KOBJ_ADD);
 	module_put(cpufreq_driver->owner);
-	dprintk("initialization complete\n");
-	cpufreq_debug_enable_ratelimit();
+	pr_debug("initialization complete\n");
 
 	return 0;
 
@@ -1088,7 +988,6 @@ err_free_policy:
 nomem_out:
 	module_put(cpufreq_driver->owner);
 module_out:
-	cpufreq_debug_enable_ratelimit();
 	return ret;
 }
 
@@ -1112,15 +1011,13 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev)
 	unsigned int j;
 #endif
 
-	cpufreq_debug_disable_ratelimit();
-	dprintk("unregistering CPU %u\n", cpu);
+	pr_debug("unregistering CPU %u\n", cpu);
 
 	spin_lock_irqsave(&cpufreq_driver_lock, flags);
 	data = per_cpu(cpufreq_cpu_data, cpu);
 
 	if (!data) {
 		spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
-		cpufreq_debug_enable_ratelimit();
 		unlock_policy_rwsem_write(cpu);
 		return -EINVAL;
 	}
@@ -1132,12 +1029,11 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev)
 	 * only need to unlink, put and exit
 	 */
 	if (unlikely(cpu != data->cpu)) {
-		dprintk("removing link\n");
+		pr_debug("removing link\n");
 		cpumask_clear_cpu(cpu, data->cpus);
 		spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
 		kobj = &sys_dev->kobj;
 		cpufreq_cpu_put(data);
-		cpufreq_debug_enable_ratelimit();
 		unlock_policy_rwsem_write(cpu);
 		sysfs_remove_link(kobj, "cpufreq");
 		return 0;
@@ -1170,7 +1066,7 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev)
 		for_each_cpu(j, data->cpus) {
 			if (j == cpu)
 				continue;
-			dprintk("removing link for cpu %u\n", j);
+			pr_debug("removing link for cpu %u\n", j);
 #ifdef CONFIG_HOTPLUG_CPU
 			strncpy(per_cpu(cpufreq_cpu_governor, j),
 				data->governor->name, CPUFREQ_NAME_LEN);
@@ -1199,21 +1095,35 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev)
 	 * not referenced anymore by anybody before we proceed with
 	 * unloading.
 	 */
-	dprintk("waiting for dropping of refcount\n");
+	pr_debug("waiting for dropping of refcount\n");
 	wait_for_completion(cmp);
-	dprintk("wait complete\n");
+	pr_debug("wait complete\n");
 
 	lock_policy_rwsem_write(cpu);
 	if (cpufreq_driver->exit)
 		cpufreq_driver->exit(data);
 	unlock_policy_rwsem_write(cpu);
 
+#ifdef CONFIG_HOTPLUG_CPU
+	/* when the CPU which is the parent of the kobj is hotplugged
+	 * offline, check for siblings, and create cpufreq sysfs interface
+	 * and symlinks
+	 */
+	if (unlikely(cpumask_weight(data->cpus) > 1)) {
+		/* first sibling now owns the new sysfs dir */
+		cpumask_clear_cpu(cpu, data->cpus);
+		cpufreq_add_dev(get_cpu_sysdev(cpumask_first(data->cpus)));
+
+		/* finally remove our own symlink */
+		lock_policy_rwsem_write(cpu);
+		__cpufreq_remove_dev(sys_dev);
+	}
+#endif
+
 	free_cpumask_var(data->related_cpus);
 	free_cpumask_var(data->cpus);
 	kfree(data);
-	per_cpu(cpufreq_cpu_data, cpu) = NULL;
 
-	cpufreq_debug_enable_ratelimit();
 	return 0;
 }
 
@@ -1239,7 +1149,7 @@ static void handle_update(struct work_struct *work)
 	struct cpufreq_policy *policy =
 		container_of(work, struct cpufreq_policy, update);
 	unsigned int cpu = policy->cpu;
-	dprintk("handle_update for cpu %u called\n", cpu);
+	pr_debug("handle_update for cpu %u called\n", cpu);
 	cpufreq_update_policy(cpu);
 }
 
@@ -1257,7 +1167,7 @@ static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq,
 {
 	struct cpufreq_freqs freqs;
 
-	dprintk("Warning: CPU frequency out of sync: cpufreq and timing "
+	pr_debug("Warning: CPU frequency out of sync: cpufreq and timing "
 	       "core thinks of %u, is %u kHz.\n", old_freq, new_freq);
 
 	freqs.cpu = cpu;
@@ -1360,7 +1270,7 @@ static int cpufreq_bp_suspend(void)
 	int cpu = smp_processor_id();
 	struct cpufreq_policy *cpu_policy;
 
-	dprintk("suspending cpu %u\n", cpu);
+	pr_debug("suspending cpu %u\n", cpu);
 
 	/* If there's no policy for the boot CPU, we have nothing to do. */
 	cpu_policy = cpufreq_cpu_get(cpu);
@@ -1398,7 +1308,7 @@ static void cpufreq_bp_resume(void)
 	int cpu = smp_processor_id();
 	struct cpufreq_policy *cpu_policy;
 
-	dprintk("resuming cpu %u\n", cpu);
+	pr_debug("resuming cpu %u\n", cpu);
 
 	/* If there's no policy for the boot CPU, we have nothing to do. */
 	cpu_policy = cpufreq_cpu_get(cpu);
@@ -1510,7 +1420,7 @@ int __cpufreq_driver_target(struct cpufreq_policy *policy,
 {
 	int retval = -EINVAL;
 
-	dprintk("target for CPU %u: %u kHz, relation %u\n", policy->cpu,
+	pr_debug("target for CPU %u: %u kHz, relation %u\n", policy->cpu,
 		target_freq, relation);
 	if (cpu_online(policy->cpu) && cpufreq_driver->target)
 		retval = cpufreq_driver->target(policy, target_freq, relation);
@@ -1596,7 +1506,7 @@ static int __cpufreq_governor(struct cpufreq_policy *policy,
 	if (!try_module_get(policy->governor->owner))
 		return -EINVAL;
 
-	dprintk("__cpufreq_governor for CPU %u, event %u\n",
+	pr_debug("__cpufreq_governor for CPU %u, event %u\n",
 						policy->cpu, event);
 	ret = policy->governor->governor(policy, event);
 
@@ -1697,8 +1607,7 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data,
 {
 	int ret = 0;
 
-	cpufreq_debug_disable_ratelimit();
-	dprintk("setting new policy for CPU %u: %u - %u kHz\n", policy->cpu,
+	pr_debug("setting new policy for CPU %u: %u - %u kHz\n", policy->cpu,
 		policy->min, policy->max);
 
 	memcpy(&policy->cpuinfo, &data->cpuinfo,
@@ -1735,19 +1644,19 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data,
 	data->min = policy->min;
 	data->max = policy->max;
 
-	dprintk("new min and max freqs are %u - %u kHz\n",
+	pr_debug("new min and max freqs are %u - %u kHz\n",
 					data->min, data->max);
 
 	if (cpufreq_driver->setpolicy) {
 		data->policy = policy->policy;
-		dprintk("setting range\n");
+		pr_debug("setting range\n");
 		ret = cpufreq_driver->setpolicy(policy);
 	} else {
 		if (policy->governor != data->governor) {
 			/* save old, working values */
 			struct cpufreq_governor *old_gov = data->governor;
 
-			dprintk("governor switch\n");
+			pr_debug("governor switch\n");
 
 			/* end old governor */
 			if (data->governor)
@@ -1757,7 +1666,7 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data,
 			data->governor = policy->governor;
 			if (__cpufreq_governor(data, CPUFREQ_GOV_START)) {
 				/* new governor failed, so re-start old one */
-				dprintk("starting governor %s failed\n",
+				pr_debug("starting governor %s failed\n",
 							data->governor->name);
 				if (old_gov) {
 					data->governor = old_gov;
@@ -1769,12 +1678,11 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data,
 			}
 			/* might be a policy change, too, so fall through */
 		}
-		dprintk("governor: change or update limits\n");
+		pr_debug("governor: change or update limits\n");
 		__cpufreq_governor(data, CPUFREQ_GOV_LIMITS);
 	}
 
 error_out:
-	cpufreq_debug_enable_ratelimit();
 	return ret;
 }
 
@@ -1801,7 +1709,7 @@ int cpufreq_update_policy(unsigned int cpu)
 		goto fail;
 	}
 
-	dprintk("updating policy for CPU %u\n", cpu);
+	pr_debug("updating policy for CPU %u\n", cpu);
 	memcpy(&policy, data, sizeof(struct cpufreq_policy));
 	policy.min = data->user_policy.min;
 	policy.max = data->user_policy.max;
@@ -1813,7 +1721,7 @@ int cpufreq_update_policy(unsigned int cpu)
 	if (cpufreq_driver->get) {
 		policy.cur = cpufreq_driver->get(cpu);
 		if (!data->cur) {
-			dprintk("Driver did not initialize current freq");
+			pr_debug("Driver did not initialize current freq");
 			data->cur = policy.cur;
 		} else {
 			if (data->cur != policy.cur)
@@ -1889,7 +1797,7 @@ int cpufreq_register_driver(struct cpufreq_driver *driver_data)
 	    ((!driver_data->setpolicy) && (!driver_data->target)))
 		return -EINVAL;
 
-	dprintk("trying to register driver %s\n", driver_data->name);
+	pr_debug("trying to register driver %s\n", driver_data->name);
 
 	if (driver_data->setpolicy)
 		driver_data->flags |= CPUFREQ_CONST_LOOPS;
@@ -1920,15 +1828,14 @@ int cpufreq_register_driver(struct cpufreq_driver *driver_data)
 
 		/* if all ->init() calls failed, unregister */
 		if (ret) {
-			dprintk("no CPU initialized for driver %s\n",
+			pr_debug("no CPU initialized for driver %s\n",
 							driver_data->name);
 			goto err_sysdev_unreg;
 		}
 	}
 
 	register_hotcpu_notifier(&cpufreq_cpu_notifier);
-	dprintk("driver %s up and running\n", driver_data->name);
-	cpufreq_debug_enable_ratelimit();
+	pr_debug("driver %s up and running\n", driver_data->name);
 
 	return 0;
 err_sysdev_unreg:
@@ -1955,14 +1862,10 @@ int cpufreq_unregister_driver(struct cpufreq_driver *driver)
 {
 	unsigned long flags;
 
-	cpufreq_debug_disable_ratelimit();
-
-	if (!cpufreq_driver || (driver != cpufreq_driver)) {
-		cpufreq_debug_enable_ratelimit();
+	if (!cpufreq_driver || (driver != cpufreq_driver))
 		return -EINVAL;
-	}
 
-	dprintk("unregistering driver %s\n", driver->name);
+	pr_debug("unregistering driver %s\n", driver->name);
 
 	sysdev_driver_unregister(&cpu_sysdev_class, &cpufreq_sysdev_driver);
 	unregister_hotcpu_notifier(&cpufreq_cpu_notifier);
diff --git a/drivers/cpufreq/cpufreq_performance.c b/drivers/cpufreq/cpufreq_performance.c
index 7e2e515087f..f13a8a9af6a 100644
--- a/drivers/cpufreq/cpufreq_performance.c
+++ b/drivers/cpufreq/cpufreq_performance.c
@@ -15,9 +15,6 @@
 #include <linux/cpufreq.h>
 #include <linux/init.h>
 
-#define dprintk(msg...) \
-	cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "performance", msg)
-
 
 static int cpufreq_governor_performance(struct cpufreq_policy *policy,
 					unsigned int event)
@@ -25,7 +22,7 @@ static int cpufreq_governor_performance(struct cpufreq_policy *policy,
 	switch (event) {
 	case CPUFREQ_GOV_START:
 	case CPUFREQ_GOV_LIMITS:
-		dprintk("setting to %u kHz because of event %u\n",
+		pr_debug("setting to %u kHz because of event %u\n",
 						policy->max, event);
 		__cpufreq_driver_target(policy, policy->max,
 						CPUFREQ_RELATION_H);
diff --git a/drivers/cpufreq/cpufreq_powersave.c b/drivers/cpufreq/cpufreq_powersave.c
index e6db5faf3eb..4c2eb512f2b 100644
--- a/drivers/cpufreq/cpufreq_powersave.c
+++ b/drivers/cpufreq/cpufreq_powersave.c
@@ -15,16 +15,13 @@
 #include <linux/cpufreq.h>
 #include <linux/init.h>
 
-#define dprintk(msg...) \
-	cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "powersave", msg)
-
 static int cpufreq_governor_powersave(struct cpufreq_policy *policy,
 					unsigned int event)
 {
 	switch (event) {
 	case CPUFREQ_GOV_START:
 	case CPUFREQ_GOV_LIMITS:
-		dprintk("setting to %u kHz because of event %u\n",
+		pr_debug("setting to %u kHz because of event %u\n",
 							policy->min, event);
 		__cpufreq_driver_target(policy, policy->min,
 						CPUFREQ_RELATION_L);
diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c
index 00d73fc8e4e..b60a4c26368 100644
--- a/drivers/cpufreq/cpufreq_stats.c
+++ b/drivers/cpufreq/cpufreq_stats.c
@@ -165,17 +165,27 @@ static int freq_table_get_index(struct cpufreq_stats *stat, unsigned int freq)
 	return -1;
 }
 
+/* should be called late in the CPU removal sequence so that the stats
+ * memory is still available in case someone tries to use it.
+ */
 static void cpufreq_stats_free_table(unsigned int cpu)
 {
 	struct cpufreq_stats *stat = per_cpu(cpufreq_stats_table, cpu);
-	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
-	if (policy && policy->cpu == cpu)
-		sysfs_remove_group(&policy->kobj, &stats_attr_group);
 	if (stat) {
 		kfree(stat->time_in_state);
 		kfree(stat);
 	}
 	per_cpu(cpufreq_stats_table, cpu) = NULL;
+}
+
+/* must be called early in the CPU removal sequence (before
+ * cpufreq_remove_dev) so that policy is still valid.
+ */
+static void cpufreq_stats_free_sysfs(unsigned int cpu)
+{
+	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+	if (policy && policy->cpu == cpu)
+		sysfs_remove_group(&policy->kobj, &stats_attr_group);
 	if (policy)
 		cpufreq_cpu_put(policy);
 }
@@ -316,6 +326,9 @@ static int __cpuinit cpufreq_stat_cpu_callback(struct notifier_block *nfb,
 	case CPU_ONLINE_FROZEN:
 		cpufreq_update_policy(cpu);
 		break;
+	case CPU_DOWN_PREPARE:
+		cpufreq_stats_free_sysfs(cpu);
+		break;
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
 		cpufreq_stats_free_table(cpu);
@@ -324,9 +337,10 @@ static int __cpuinit cpufreq_stat_cpu_callback(struct notifier_block *nfb,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block cpufreq_stat_cpu_notifier __refdata =
-{
+/* priority=1 so this will get called before cpufreq_remove_dev */
+static struct notifier_block cpufreq_stat_cpu_notifier __refdata = {
 	.notifier_call = cpufreq_stat_cpu_callback,
+	.priority = 1,
 };
 
 static struct notifier_block notifier_policy_block = {
diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c
index 66d2d1d6c80..f231015904c 100644
--- a/drivers/cpufreq/cpufreq_userspace.c
+++ b/drivers/cpufreq/cpufreq_userspace.c
@@ -37,9 +37,6 @@ static DEFINE_PER_CPU(unsigned int, cpu_is_managed);
 static DEFINE_MUTEX(userspace_mutex);
 static int cpus_using_userspace_governor;
 
-#define dprintk(msg...) \
-	cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "userspace", msg)
-
 /* keep track of frequency transitions */
 static int
 userspace_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
@@ -50,7 +47,7 @@ userspace_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 	if (!per_cpu(cpu_is_managed, freq->cpu))
 		return 0;
 
-	dprintk("saving cpu_cur_freq of cpu %u to be %u kHz\n",
+	pr_debug("saving cpu_cur_freq of cpu %u to be %u kHz\n",
 			freq->cpu, freq->new);
 	per_cpu(cpu_cur_freq, freq->cpu) = freq->new;
 
@@ -73,7 +70,7 @@ static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq)
 {
 	int ret = -EINVAL;
 
-	dprintk("cpufreq_set for cpu %u, freq %u kHz\n", policy->cpu, freq);
+	pr_debug("cpufreq_set for cpu %u, freq %u kHz\n", policy->cpu, freq);
 
 	mutex_lock(&userspace_mutex);
 	if (!per_cpu(cpu_is_managed, policy->cpu))
@@ -134,7 +131,7 @@ static int cpufreq_governor_userspace(struct cpufreq_policy *policy,
 		per_cpu(cpu_max_freq, cpu) = policy->max;
 		per_cpu(cpu_cur_freq, cpu) = policy->cur;
 		per_cpu(cpu_set_freq, cpu) = policy->cur;
-		dprintk("managing cpu %u started "
+		pr_debug("managing cpu %u started "
 			"(%u - %u kHz, currently %u kHz)\n",
 				cpu,
 				per_cpu(cpu_min_freq, cpu),
@@ -156,12 +153,12 @@ static int cpufreq_governor_userspace(struct cpufreq_policy *policy,
 		per_cpu(cpu_min_freq, cpu) = 0;
 		per_cpu(cpu_max_freq, cpu) = 0;
 		per_cpu(cpu_set_freq, cpu) = 0;
-		dprintk("managing cpu %u stopped\n", cpu);
+		pr_debug("managing cpu %u stopped\n", cpu);
 		mutex_unlock(&userspace_mutex);
 		break;
 	case CPUFREQ_GOV_LIMITS:
 		mutex_lock(&userspace_mutex);
-		dprintk("limit event for cpu %u: %u - %u kHz, "
+		pr_debug("limit event for cpu %u: %u - %u kHz, "
 			"currently %u kHz, last set to %u kHz\n",
 			cpu, policy->min, policy->max,
 			per_cpu(cpu_cur_freq, cpu),
diff --git a/drivers/cpufreq/e_powersaver.c b/drivers/cpufreq/e_powersaver.c
new file mode 100644
index 00000000000..35a257dd4bb
--- /dev/null
+++ b/drivers/cpufreq/e_powersaver.c
@@ -0,0 +1,367 @@
+/*
+ *  Based on documentation provided by Dave Jones. Thanks!
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/timex.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+#include <asm/msr.h>
+#include <asm/tsc.h>
+
+#define EPS_BRAND_C7M	0
+#define EPS_BRAND_C7	1
+#define EPS_BRAND_EDEN	2
+#define EPS_BRAND_C3	3
+#define EPS_BRAND_C7D	4
+
+struct eps_cpu_data {
+	u32 fsb;
+	struct cpufreq_frequency_table freq_table[];
+};
+
+static struct eps_cpu_data *eps_cpu[NR_CPUS];
+
+
+static unsigned int eps_get(unsigned int cpu)
+{
+	struct eps_cpu_data *centaur;
+	u32 lo, hi;
+
+	if (cpu)
+		return 0;
+	centaur = eps_cpu[cpu];
+	if (centaur == NULL)
+		return 0;
+
+	/* Return current frequency */
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	return centaur->fsb * ((lo >> 8) & 0xff);
+}
+
+static int eps_set_state(struct eps_cpu_data *centaur,
+			 unsigned int cpu,
+			 u32 dest_state)
+{
+	struct cpufreq_freqs freqs;
+	u32 lo, hi;
+	int err = 0;
+	int i;
+
+	freqs.old = eps_get(cpu);
+	freqs.new = centaur->fsb * ((dest_state >> 8) & 0xff);
+	freqs.cpu = cpu;
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	/* Wait while CPU is busy */
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	i = 0;
+	while (lo & ((1 << 16) | (1 << 17))) {
+		udelay(16);
+		rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+		i++;
+		if (unlikely(i > 64)) {
+			err = -ENODEV;
+			goto postchange;
+		}
+	}
+	/* Set new multiplier and voltage */
+	wrmsr(MSR_IA32_PERF_CTL, dest_state & 0xffff, 0);
+	/* Wait until transition end */
+	i = 0;
+	do {
+		udelay(16);
+		rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+		i++;
+		if (unlikely(i > 64)) {
+			err = -ENODEV;
+			goto postchange;
+		}
+	} while (lo & ((1 << 16) | (1 << 17)));
+
+	/* Return current frequency */
+postchange:
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	freqs.new = centaur->fsb * ((lo >> 8) & 0xff);
+
+#ifdef DEBUG
+	{
+	u8 current_multiplier, current_voltage;
+
+	/* Print voltage and multiplier */
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	current_voltage = lo & 0xff;
+	printk(KERN_INFO "eps: Current voltage = %dmV\n",
+		current_voltage * 16 + 700);
+	current_multiplier = (lo >> 8) & 0xff;
+	printk(KERN_INFO "eps: Current multiplier = %d\n",
+		current_multiplier);
+	}
+#endif
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	return err;
+}
+
+static int eps_target(struct cpufreq_policy *policy,
+			       unsigned int target_freq,
+			       unsigned int relation)
+{
+	struct eps_cpu_data *centaur;
+	unsigned int newstate = 0;
+	unsigned int cpu = policy->cpu;
+	unsigned int dest_state;
+	int ret;
+
+	if (unlikely(eps_cpu[cpu] == NULL))
+		return -ENODEV;
+	centaur = eps_cpu[cpu];
+
+	if (unlikely(cpufreq_frequency_table_target(policy,
+			&eps_cpu[cpu]->freq_table[0],
+			target_freq,
+			relation,
+			&newstate))) {
+		return -EINVAL;
+	}
+
+	/* Make frequency transition */
+	dest_state = centaur->freq_table[newstate].index & 0xffff;
+	ret = eps_set_state(centaur, cpu, dest_state);
+	if (ret)
+		printk(KERN_ERR "eps: Timeout!\n");
+	return ret;
+}
+
+static int eps_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy,
+			&eps_cpu[policy->cpu]->freq_table[0]);
+}
+
+static int eps_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned int i;
+	u32 lo, hi;
+	u64 val;
+	u8 current_multiplier, current_voltage;
+	u8 max_multiplier, max_voltage;
+	u8 min_multiplier, min_voltage;
+	u8 brand = 0;
+	u32 fsb;
+	struct eps_cpu_data *centaur;
+	struct cpuinfo_x86 *c = &cpu_data(0);
+	struct cpufreq_frequency_table *f_table;
+	int k, step, voltage;
+	int ret;
+	int states;
+
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	/* Check brand */
+	printk(KERN_INFO "eps: Detected VIA ");
+
+	switch (c->x86_model) {
+	case 10:
+		rdmsr(0x1153, lo, hi);
+		brand = (((lo >> 2) ^ lo) >> 18) & 3;
+		printk(KERN_CONT "Model A ");
+		break;
+	case 13:
+		rdmsr(0x1154, lo, hi);
+		brand = (((lo >> 4) ^ (lo >> 2))) & 0x000000ff;
+		printk(KERN_CONT "Model D ");
+		break;
+	}
+
+	switch (brand) {
+	case EPS_BRAND_C7M:
+		printk(KERN_CONT "C7-M\n");
+		break;
+	case EPS_BRAND_C7:
+		printk(KERN_CONT "C7\n");
+		break;
+	case EPS_BRAND_EDEN:
+		printk(KERN_CONT "Eden\n");
+		break;
+	case EPS_BRAND_C7D:
+		printk(KERN_CONT "C7-D\n");
+		break;
+	case EPS_BRAND_C3:
+		printk(KERN_CONT "C3\n");
+		return -ENODEV;
+		break;
+	}
+	/* Enable Enhanced PowerSaver */
+	rdmsrl(MSR_IA32_MISC_ENABLE, val);
+	if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
+		val |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP;
+		wrmsrl(MSR_IA32_MISC_ENABLE, val);
+		/* Can be locked at 0 */
+		rdmsrl(MSR_IA32_MISC_ENABLE, val);
+		if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
+			printk(KERN_INFO "eps: Can't enable Enhanced PowerSaver\n");
+			return -ENODEV;
+		}
+	}
+
+	/* Print voltage and multiplier */
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	current_voltage = lo & 0xff;
+	printk(KERN_INFO "eps: Current voltage = %dmV\n",
+			current_voltage * 16 + 700);
+	current_multiplier = (lo >> 8) & 0xff;
+	printk(KERN_INFO "eps: Current multiplier = %d\n", current_multiplier);
+
+	/* Print limits */
+	max_voltage = hi & 0xff;
+	printk(KERN_INFO "eps: Highest voltage = %dmV\n",
+			max_voltage * 16 + 700);
+	max_multiplier = (hi >> 8) & 0xff;
+	printk(KERN_INFO "eps: Highest multiplier = %d\n", max_multiplier);
+	min_voltage = (hi >> 16) & 0xff;
+	printk(KERN_INFO "eps: Lowest voltage = %dmV\n",
+			min_voltage * 16 + 700);
+	min_multiplier = (hi >> 24) & 0xff;
+	printk(KERN_INFO "eps: Lowest multiplier = %d\n", min_multiplier);
+
+	/* Sanity checks */
+	if (current_multiplier == 0 || max_multiplier == 0
+	    || min_multiplier == 0)
+		return -EINVAL;
+	if (current_multiplier > max_multiplier
+	    || max_multiplier <= min_multiplier)
+		return -EINVAL;
+	if (current_voltage > 0x1f || max_voltage > 0x1f)
+		return -EINVAL;
+	if (max_voltage < min_voltage)
+		return -EINVAL;
+
+	/* Calc FSB speed */
+	fsb = cpu_khz / current_multiplier;
+	/* Calc number of p-states supported */
+	if (brand == EPS_BRAND_C7M)
+		states = max_multiplier - min_multiplier + 1;
+	else
+		states = 2;
+
+	/* Allocate private data and frequency table for current cpu */
+	centaur = kzalloc(sizeof(struct eps_cpu_data)
+		    + (states + 1) * sizeof(struct cpufreq_frequency_table),
+		    GFP_KERNEL);
+	if (!centaur)
+		return -ENOMEM;
+	eps_cpu[0] = centaur;
+
+	/* Copy basic values */
+	centaur->fsb = fsb;
+
+	/* Fill frequency and MSR value table */
+	f_table = &centaur->freq_table[0];
+	if (brand != EPS_BRAND_C7M) {
+		f_table[0].frequency = fsb * min_multiplier;
+		f_table[0].index = (min_multiplier << 8) | min_voltage;
+		f_table[1].frequency = fsb * max_multiplier;
+		f_table[1].index = (max_multiplier << 8) | max_voltage;
+		f_table[2].frequency = CPUFREQ_TABLE_END;
+	} else {
+		k = 0;
+		step = ((max_voltage - min_voltage) * 256)
+			/ (max_multiplier - min_multiplier);
+		for (i = min_multiplier; i <= max_multiplier; i++) {
+			voltage = (k * step) / 256 + min_voltage;
+			f_table[k].frequency = fsb * i;
+			f_table[k].index = (i << 8) | voltage;
+			k++;
+		}
+		f_table[k].frequency = CPUFREQ_TABLE_END;
+	}
+
+	policy->cpuinfo.transition_latency = 140000; /* 844mV -> 700mV in ns */
+	policy->cur = fsb * current_multiplier;
+
+	ret = cpufreq_frequency_table_cpuinfo(policy, &centaur->freq_table[0]);
+	if (ret) {
+		kfree(centaur);
+		return ret;
+	}
+
+	cpufreq_frequency_table_get_attr(&centaur->freq_table[0], policy->cpu);
+	return 0;
+}
+
+static int eps_cpu_exit(struct cpufreq_policy *policy)
+{
+	unsigned int cpu = policy->cpu;
+	struct eps_cpu_data *centaur;
+	u32 lo, hi;
+
+	if (eps_cpu[cpu] == NULL)
+		return -ENODEV;
+	centaur = eps_cpu[cpu];
+
+	/* Get max frequency */
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	/* Set max frequency */
+	eps_set_state(centaur, cpu, hi & 0xffff);
+	/* Bye */
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	kfree(eps_cpu[cpu]);
+	eps_cpu[cpu] = NULL;
+	return 0;
+}
+
+static struct freq_attr *eps_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver eps_driver = {
+	.verify		= eps_verify,
+	.target		= eps_target,
+	.init		= eps_cpu_init,
+	.exit		= eps_cpu_exit,
+	.get		= eps_get,
+	.name		= "e_powersaver",
+	.owner		= THIS_MODULE,
+	.attr		= eps_attr,
+};
+
+static int __init eps_init(void)
+{
+	struct cpuinfo_x86 *c = &cpu_data(0);
+
+	/* This driver will work only on Centaur C7 processors with
+	 * Enhanced SpeedStep/PowerSaver registers */
+	if (c->x86_vendor != X86_VENDOR_CENTAUR
+	    || c->x86 != 6 || c->x86_model < 10)
+		return -ENODEV;
+	if (!cpu_has(c, X86_FEATURE_EST))
+		return -ENODEV;
+
+	if (cpufreq_register_driver(&eps_driver))
+		return -EINVAL;
+	return 0;
+}
+
+static void __exit eps_exit(void)
+{
+	cpufreq_unregister_driver(&eps_driver);
+}
+
+MODULE_AUTHOR("Rafal Bilski <rafalbilski@interia.pl>");
+MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's.");
+MODULE_LICENSE("GPL");
+
+module_init(eps_init);
+module_exit(eps_exit);
diff --git a/drivers/cpufreq/elanfreq.c b/drivers/cpufreq/elanfreq.c
new file mode 100644
index 00000000000..c587db472a7
--- /dev/null
+++ b/drivers/cpufreq/elanfreq.c
@@ -0,0 +1,309 @@
+/*
+ *	elanfreq:	cpufreq driver for the AMD ELAN family
+ *
+ *	(c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de>
+ *
+ *	Parts of this code are (c) Sven Geggus <sven@geggus.net>
+ *
+ *      All Rights Reserved.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/delay.h>
+#include <linux/cpufreq.h>
+
+#include <asm/msr.h>
+#include <linux/timex.h>
+#include <linux/io.h>
+
+#define REG_CSCIR 0x22		/* Chip Setup and Control Index Register    */
+#define REG_CSCDR 0x23		/* Chip Setup and Control Data  Register    */
+
+/* Module parameter */
+static int max_freq;
+
+struct s_elan_multiplier {
+	int clock;		/* frequency in kHz                         */
+	int val40h;		/* PMU Force Mode register                  */
+	int val80h;		/* CPU Clock Speed Register                 */
+};
+
+/*
+ * It is important that the frequencies
+ * are listed in ascending order here!
+ */
+static struct s_elan_multiplier elan_multiplier[] = {
+	{1000,	0x02,	0x18},
+	{2000,	0x02,	0x10},
+	{4000,	0x02,	0x08},
+	{8000,	0x00,	0x00},
+	{16000,	0x00,	0x02},
+	{33000,	0x00,	0x04},
+	{66000,	0x01,	0x04},
+	{99000,	0x01,	0x05}
+};
+
+static struct cpufreq_frequency_table elanfreq_table[] = {
+	{0,	1000},
+	{1,	2000},
+	{2,	4000},
+	{3,	8000},
+	{4,	16000},
+	{5,	33000},
+	{6,	66000},
+	{7,	99000},
+	{0,	CPUFREQ_TABLE_END},
+};
+
+
+/**
+ *	elanfreq_get_cpu_frequency: determine current cpu speed
+ *
+ *	Finds out at which frequency the CPU of the Elan SOC runs
+ *	at the moment. Frequencies from 1 to 33 MHz are generated
+ *	the normal way, 66 and 99 MHz are called "Hyperspeed Mode"
+ *	and have the rest of the chip running with 33 MHz.
+ */
+
+static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
+{
+	u8 clockspeed_reg;    /* Clock Speed Register */
+
+	local_irq_disable();
+	outb_p(0x80, REG_CSCIR);
+	clockspeed_reg = inb_p(REG_CSCDR);
+	local_irq_enable();
+
+	if ((clockspeed_reg & 0xE0) == 0xE0)
+		return 0;
+
+	/* Are we in CPU clock multiplied mode (66/99 MHz)? */
+	if ((clockspeed_reg & 0xE0) == 0xC0) {
+		if ((clockspeed_reg & 0x01) == 0)
+			return 66000;
+		else
+			return 99000;
+	}
+
+	/* 33 MHz is not 32 MHz... */
+	if ((clockspeed_reg & 0xE0) == 0xA0)
+		return 33000;
+
+	return (1<<((clockspeed_reg & 0xE0) >> 5)) * 1000;
+}
+
+
+/**
+ *	elanfreq_set_cpu_frequency: Change the CPU core frequency
+ *	@cpu: cpu number
+ *	@freq: frequency in kHz
+ *
+ *	This function takes a frequency value and changes the CPU frequency
+ *	according to this. Note that the frequency has to be checked by
+ *	elanfreq_validatespeed() for correctness!
+ *
+ *	There is no return value.
+ */
+
+static void elanfreq_set_cpu_state(unsigned int state)
+{
+	struct cpufreq_freqs    freqs;
+
+	freqs.old = elanfreq_get_cpu_frequency(0);
+	freqs.new = elan_multiplier[state].clock;
+	freqs.cpu = 0; /* elanfreq.c is UP only driver */
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n",
+			elan_multiplier[state].clock);
+
+
+	/*
+	 * Access to the Elan's internal registers is indexed via
+	 * 0x22: Chip Setup & Control Register Index Register (CSCI)
+	 * 0x23: Chip Setup & Control Register Data  Register (CSCD)
+	 *
+	 */
+
+	/*
+	 * 0x40 is the Power Management Unit's Force Mode Register.
+	 * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency)
+	 */
+
+	local_irq_disable();
+	outb_p(0x40, REG_CSCIR);		/* Disable hyperspeed mode */
+	outb_p(0x00, REG_CSCDR);
+	local_irq_enable();		/* wait till internal pipelines and */
+	udelay(1000);			/* buffers have cleaned up          */
+
+	local_irq_disable();
+
+	/* now, set the CPU clock speed register (0x80) */
+	outb_p(0x80, REG_CSCIR);
+	outb_p(elan_multiplier[state].val80h, REG_CSCDR);
+
+	/* now, the hyperspeed bit in PMU Force Mode Register (0x40) */
+	outb_p(0x40, REG_CSCIR);
+	outb_p(elan_multiplier[state].val40h, REG_CSCDR);
+	udelay(10000);
+	local_irq_enable();
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+};
+
+
+/**
+ *	elanfreq_validatespeed: test if frequency range is valid
+ *	@policy: the policy to validate
+ *
+ *	This function checks if a given frequency range in kHz is valid
+ *	for the hardware supported by the driver.
+ */
+
+static int elanfreq_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]);
+}
+
+static int elanfreq_target(struct cpufreq_policy *policy,
+			    unsigned int target_freq,
+			    unsigned int relation)
+{
+	unsigned int newstate = 0;
+
+	if (cpufreq_frequency_table_target(policy, &elanfreq_table[0],
+				target_freq, relation, &newstate))
+		return -EINVAL;
+
+	elanfreq_set_cpu_state(newstate);
+
+	return 0;
+}
+
+
+/*
+ *	Module init and exit code
+ */
+
+static int elanfreq_cpu_init(struct cpufreq_policy *policy)
+{
+	struct cpuinfo_x86 *c = &cpu_data(0);
+	unsigned int i;
+	int result;
+
+	/* capability check */
+	if ((c->x86_vendor != X86_VENDOR_AMD) ||
+	    (c->x86 != 4) || (c->x86_model != 10))
+		return -ENODEV;
+
+	/* max freq */
+	if (!max_freq)
+		max_freq = elanfreq_get_cpu_frequency(0);
+
+	/* table init */
+	for (i = 0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
+		if (elanfreq_table[i].frequency > max_freq)
+			elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+	}
+
+	/* cpuinfo and default policy values */
+	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	policy->cur = elanfreq_get_cpu_frequency(0);
+
+	result = cpufreq_frequency_table_cpuinfo(policy, elanfreq_table);
+	if (result)
+		return result;
+
+	cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu);
+	return 0;
+}
+
+
+static int elanfreq_cpu_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	return 0;
+}
+
+
+#ifndef MODULE
+/**
+ * elanfreq_setup - elanfreq command line parameter parsing
+ *
+ * elanfreq command line parameter.  Use:
+ *  elanfreq=66000
+ * to set the maximum CPU frequency to 66 MHz. Note that in
+ * case you do not give this boot parameter, the maximum
+ * frequency will fall back to _current_ CPU frequency which
+ * might be lower. If you build this as a module, use the
+ * max_freq module parameter instead.
+ */
+static int __init elanfreq_setup(char *str)
+{
+	max_freq = simple_strtoul(str, &str, 0);
+	printk(KERN_WARNING "You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");
+	return 1;
+}
+__setup("elanfreq=", elanfreq_setup);
+#endif
+
+
+static struct freq_attr *elanfreq_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+
+static struct cpufreq_driver elanfreq_driver = {
+	.get		= elanfreq_get_cpu_frequency,
+	.verify		= elanfreq_verify,
+	.target		= elanfreq_target,
+	.init		= elanfreq_cpu_init,
+	.exit		= elanfreq_cpu_exit,
+	.name		= "elanfreq",
+	.owner		= THIS_MODULE,
+	.attr		= elanfreq_attr,
+};
+
+
+static int __init elanfreq_init(void)
+{
+	struct cpuinfo_x86 *c = &cpu_data(0);
+
+	/* Test if we have the right hardware */
+	if ((c->x86_vendor != X86_VENDOR_AMD) ||
+		(c->x86 != 4) || (c->x86_model != 10)) {
+		printk(KERN_INFO "elanfreq: error: no Elan processor found!\n");
+		return -ENODEV;
+	}
+	return cpufreq_register_driver(&elanfreq_driver);
+}
+
+
+static void __exit elanfreq_exit(void)
+{
+	cpufreq_unregister_driver(&elanfreq_driver);
+}
+
+
+module_param(max_freq, int, 0444);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, "
+		"Sven Geggus <sven@geggus.net>");
+MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");
+
+module_init(elanfreq_init);
+module_exit(elanfreq_exit);
diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c
index 05432216e22..90431cb9280 100644
--- a/drivers/cpufreq/freq_table.c
+++ b/drivers/cpufreq/freq_table.c
@@ -14,9 +14,6 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 
-#define dprintk(msg...) \
-	cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, "freq-table", msg)
-
 /*********************************************************************
  *                     FREQUENCY TABLE HELPERS                       *
  *********************************************************************/
@@ -31,11 +28,11 @@ int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy,
 	for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
 		unsigned int freq = table[i].frequency;
 		if (freq == CPUFREQ_ENTRY_INVALID) {
-			dprintk("table entry %u is invalid, skipping\n", i);
+			pr_debug("table entry %u is invalid, skipping\n", i);
 
 			continue;
 		}
-		dprintk("table entry %u: %u kHz, %u index\n",
+		pr_debug("table entry %u: %u kHz, %u index\n",
 					i, freq, table[i].index);
 		if (freq < min_freq)
 			min_freq = freq;
@@ -61,7 +58,7 @@ int cpufreq_frequency_table_verify(struct cpufreq_policy *policy,
 	unsigned int i;
 	unsigned int count = 0;
 
-	dprintk("request for verification of policy (%u - %u kHz) for cpu %u\n",
+	pr_debug("request for verification of policy (%u - %u kHz) for cpu %u\n",
 					policy->min, policy->max, policy->cpu);
 
 	if (!cpu_online(policy->cpu))
@@ -86,7 +83,7 @@ int cpufreq_frequency_table_verify(struct cpufreq_policy *policy,
 	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
 				     policy->cpuinfo.max_freq);
 
-	dprintk("verification lead to (%u - %u kHz) for cpu %u\n",
+	pr_debug("verification lead to (%u - %u kHz) for cpu %u\n",
 				policy->min, policy->max, policy->cpu);
 
 	return 0;
@@ -110,7 +107,7 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
 	};
 	unsigned int i;
 
-	dprintk("request for target %u kHz (relation: %u) for cpu %u\n",
+	pr_debug("request for target %u kHz (relation: %u) for cpu %u\n",
 					target_freq, relation, policy->cpu);
 
 	switch (relation) {
@@ -167,7 +164,7 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
 	} else
 		*index = optimal.index;
 
-	dprintk("target is %u (%u kHz, %u)\n", *index, table[*index].frequency,
+	pr_debug("target is %u (%u kHz, %u)\n", *index, table[*index].frequency,
 		table[*index].index);
 
 	return 0;
@@ -216,14 +213,14 @@ EXPORT_SYMBOL_GPL(cpufreq_freq_attr_scaling_available_freqs);
 void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table,
 				      unsigned int cpu)
 {
-	dprintk("setting show_table for cpu %u to %p\n", cpu, table);
+	pr_debug("setting show_table for cpu %u to %p\n", cpu, table);
 	per_cpu(cpufreq_show_table, cpu) = table;
 }
 EXPORT_SYMBOL_GPL(cpufreq_frequency_table_get_attr);
 
 void cpufreq_frequency_table_put_attr(unsigned int cpu)
 {
-	dprintk("clearing show_table for cpu %u\n", cpu);
+	pr_debug("clearing show_table for cpu %u\n", cpu);
 	per_cpu(cpufreq_show_table, cpu) = NULL;
 }
 EXPORT_SYMBOL_GPL(cpufreq_frequency_table_put_attr);
diff --git a/drivers/cpufreq/gx-suspmod.c b/drivers/cpufreq/gx-suspmod.c
new file mode 100644
index 00000000000..ffe1f2c92ed
--- /dev/null
+++ b/drivers/cpufreq/gx-suspmod.c
@@ -0,0 +1,514 @@
+/*
+ *	Cyrix MediaGX and NatSemi Geode Suspend Modulation
+ *	(C) 2002 Zwane Mwaikambo <zwane@commfireservices.com>
+ *	(C) 2002 Hiroshi Miura   <miura@da-cha.org>
+ *	All Rights Reserved
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      version 2 as published by the Free Software Foundation
+ *
+ *      The author(s) of this software shall not be held liable for damages
+ *      of any nature resulting due to the use of this software. This
+ *      software is provided AS-IS with no warranties.
+ *
+ * Theoretical note:
+ *
+ *	(see Geode(tm) CS5530 manual (rev.4.1) page.56)
+ *
+ *	CPU frequency control on NatSemi Geode GX1/GXLV processor and CS55x0
+ *	are based on Suspend Modulation.
+ *
+ *	Suspend Modulation works by asserting and de-asserting the SUSP# pin
+ *	to CPU(GX1/GXLV) for configurable durations. When asserting SUSP#
+ *	the CPU enters an idle state. GX1 stops its core clock when SUSP# is
+ *	asserted then power consumption is reduced.
+ *
+ *	Suspend Modulation's OFF/ON duration are configurable
+ *	with 'Suspend Modulation OFF Count Register'
+ *	and 'Suspend Modulation ON Count Register'.
+ *	These registers are 8bit counters that represent the number of
+ *	32us intervals which the SUSP# pin is asserted(ON)/de-asserted(OFF)
+ *	to the processor.
+ *
+ *	These counters define a ratio which is the effective frequency
+ *	of operation of the system.
+ *
+ *			       OFF Count
+ *	F_eff = Fgx * ----------------------
+ *	                OFF Count + ON Count
+ *
+ *	0 <= On Count, Off Count <= 255
+ *
+ *	From these limits, we can get register values
+ *
+ *	off_duration + on_duration <= MAX_DURATION
+ *	on_duration = off_duration * (stock_freq - freq) / freq
+ *
+ *      off_duration  =  (freq * DURATION) / stock_freq
+ *      on_duration = DURATION - off_duration
+ *
+ *
+ *---------------------------------------------------------------------------
+ *
+ * ChangeLog:
+ *	Dec. 12, 2003	Hiroshi Miura <miura@da-cha.org>
+ *		- fix on/off register mistake
+ *		- fix cpu_khz calc when it stops cpu modulation.
+ *
+ *	Dec. 11, 2002	Hiroshi Miura <miura@da-cha.org>
+ *		- rewrite for Cyrix MediaGX Cx5510/5520 and
+ *		  NatSemi Geode Cs5530(A).
+ *
+ *	Jul. ??, 2002  Zwane Mwaikambo <zwane@commfireservices.com>
+ *		- cs5530_mod patch for 2.4.19-rc1.
+ *
+ *---------------------------------------------------------------------------
+ *
+ * Todo
+ *	Test on machines with 5510, 5530, 5530A
+ */
+
+/************************************************************************
+ *			Suspend Modulation - Definitions		*
+ ************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+
+#include <asm/processor-cyrix.h>
+
+/* PCI config registers, all at F0 */
+#define PCI_PMER1	0x80	/* power management enable register 1 */
+#define PCI_PMER2	0x81	/* power management enable register 2 */
+#define PCI_PMER3	0x82	/* power management enable register 3 */
+#define PCI_IRQTC	0x8c	/* irq speedup timer counter register:typical 2 to 4ms */
+#define PCI_VIDTC	0x8d	/* video speedup timer counter register: typical 50 to 100ms */
+#define PCI_MODOFF	0x94	/* suspend modulation OFF counter register, 1 = 32us */
+#define PCI_MODON	0x95	/* suspend modulation ON counter register */
+#define PCI_SUSCFG	0x96	/* suspend configuration register */
+
+/* PMER1 bits */
+#define GPM		(1<<0)	/* global power management */
+#define GIT		(1<<1)	/* globally enable PM device idle timers */
+#define GTR		(1<<2)	/* globally enable IO traps */
+#define IRQ_SPDUP	(1<<3)	/* disable clock throttle during interrupt handling */
+#define VID_SPDUP	(1<<4)	/* disable clock throttle during vga video handling */
+
+/* SUSCFG bits */
+#define SUSMOD		(1<<0)	/* enable/disable suspend modulation */
+/* the below is supported only with cs5530 (after rev.1.2)/cs5530A */
+#define SMISPDUP	(1<<1)	/* select how SMI re-enable suspend modulation: */
+				/* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */
+#define SUSCFG		(1<<2)	/* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */
+/* the below is supported only with cs5530A */
+#define PWRSVE_ISA	(1<<3)	/* stop ISA clock  */
+#define PWRSVE		(1<<4)	/* active idle */
+
+struct gxfreq_params {
+	u8 on_duration;
+	u8 off_duration;
+	u8 pci_suscfg;
+	u8 pci_pmer1;
+	u8 pci_pmer2;
+	struct pci_dev *cs55x0;
+};
+
+static struct gxfreq_params *gx_params;
+static int stock_freq;
+
+/* PCI bus clock - defaults to 30.000 if cpu_khz is not available */
+static int pci_busclk;
+module_param(pci_busclk, int, 0444);
+
+/* maximum duration for which the cpu may be suspended
+ * (32us * MAX_DURATION). If no parameter is given, this defaults
+ * to 255.
+ * Note that this leads to a maximum of 8 ms(!) where the CPU clock
+ * is suspended -- processing power is just 0.39% of what it used to be,
+ * though. 781.25 kHz(!) for a 200 MHz processor -- wow. */
+static int max_duration = 255;
+module_param(max_duration, int, 0444);
+
+/* For the default policy, we want at least some processing power
+ * - let's say 5%. (min = maxfreq / POLICY_MIN_DIV)
+ */
+#define POLICY_MIN_DIV 20
+
+
+/**
+ * we can detect a core multipiler from dir0_lsb
+ * from GX1 datasheet p.56,
+ *	MULT[3:0]:
+ *	0000 = SYSCLK multiplied by 4 (test only)
+ *	0001 = SYSCLK multiplied by 10
+ *	0010 = SYSCLK multiplied by 4
+ *	0011 = SYSCLK multiplied by 6
+ *	0100 = SYSCLK multiplied by 9
+ *	0101 = SYSCLK multiplied by 5
+ *	0110 = SYSCLK multiplied by 7
+ *	0111 = SYSCLK multiplied by 8
+ *              of 33.3MHz
+ **/
+static int gx_freq_mult[16] = {
+		4, 10, 4, 6, 9, 5, 7, 8,
+		0, 0, 0, 0, 0, 0, 0, 0
+};
+
+
+/****************************************************************
+ *	Low Level chipset interface				*
+ ****************************************************************/
+static struct pci_device_id gx_chipset_tbl[] __initdata = {
+	{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY), },
+	{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5520), },
+	{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), },
+	{ 0, },
+};
+
+static void gx_write_byte(int reg, int value)
+{
+	pci_write_config_byte(gx_params->cs55x0, reg, value);
+}
+
+/**
+ * gx_detect_chipset:
+ *
+ **/
+static __init struct pci_dev *gx_detect_chipset(void)
+{
+	struct pci_dev *gx_pci = NULL;
+
+	/* check if CPU is a MediaGX or a Geode. */
+	if ((boot_cpu_data.x86_vendor != X86_VENDOR_NSC) &&
+	    (boot_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) {
+		pr_debug("error: no MediaGX/Geode processor found!\n");
+		return NULL;
+	}
+
+	/* detect which companion chip is used */
+	for_each_pci_dev(gx_pci) {
+		if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL)
+			return gx_pci;
+	}
+
+	pr_debug("error: no supported chipset found!\n");
+	return NULL;
+}
+
+/**
+ * gx_get_cpuspeed:
+ *
+ * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi
+ * Geode CPU runs.
+ */
+static unsigned int gx_get_cpuspeed(unsigned int cpu)
+{
+	if ((gx_params->pci_suscfg & SUSMOD) == 0)
+		return stock_freq;
+
+	return (stock_freq * gx_params->off_duration)
+		/ (gx_params->on_duration + gx_params->off_duration);
+}
+
+/**
+ *      gx_validate_speed:
+ *      determine current cpu speed
+ *
+ **/
+
+static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration,
+		u8 *off_duration)
+{
+	unsigned int i;
+	u8 tmp_on, tmp_off;
+	int old_tmp_freq = stock_freq;
+	int tmp_freq;
+
+	*off_duration = 1;
+	*on_duration = 0;
+
+	for (i = max_duration; i > 0; i--) {
+		tmp_off = ((khz * i) / stock_freq) & 0xff;
+		tmp_on = i - tmp_off;
+		tmp_freq = (stock_freq * tmp_off) / i;
+		/* if this relation is closer to khz, use this. If it's equal,
+		 * prefer it, too - lower latency */
+		if (abs(tmp_freq - khz) <= abs(old_tmp_freq - khz)) {
+			*on_duration = tmp_on;
+			*off_duration = tmp_off;
+			old_tmp_freq = tmp_freq;
+		}
+	}
+
+	return old_tmp_freq;
+}
+
+
+/**
+ * gx_set_cpuspeed:
+ * set cpu speed in khz.
+ **/
+
+static void gx_set_cpuspeed(unsigned int khz)
+{
+	u8 suscfg, pmer1;
+	unsigned int new_khz;
+	unsigned long flags;
+	struct cpufreq_freqs freqs;
+
+	freqs.cpu = 0;
+	freqs.old = gx_get_cpuspeed(0);
+
+	new_khz = gx_validate_speed(khz, &gx_params->on_duration,
+			&gx_params->off_duration);
+
+	freqs.new = new_khz;
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	local_irq_save(flags);
+
+
+
+	if (new_khz != stock_freq) {
+		/* if new khz == 100% of CPU speed, it is special case */
+		switch (gx_params->cs55x0->device) {
+		case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
+			pmer1 = gx_params->pci_pmer1 | IRQ_SPDUP | VID_SPDUP;
+			/* FIXME: need to test other values -- Zwane,Miura */
+			/* typical 2 to 4ms */
+			gx_write_byte(PCI_IRQTC, 4);
+			/* typical 50 to 100ms */
+			gx_write_byte(PCI_VIDTC, 100);
+			gx_write_byte(PCI_PMER1, pmer1);
+
+			if (gx_params->cs55x0->revision < 0x10) {
+				/* CS5530(rev 1.2, 1.3) */
+				suscfg = gx_params->pci_suscfg|SUSMOD;
+			} else {
+				/* CS5530A,B.. */
+				suscfg = gx_params->pci_suscfg|SUSMOD|PWRSVE;
+			}
+			break;
+		case PCI_DEVICE_ID_CYRIX_5520:
+		case PCI_DEVICE_ID_CYRIX_5510:
+			suscfg = gx_params->pci_suscfg | SUSMOD;
+			break;
+		default:
+			local_irq_restore(flags);
+			pr_debug("fatal: try to set unknown chipset.\n");
+			return;
+		}
+	} else {
+		suscfg = gx_params->pci_suscfg & ~(SUSMOD);
+		gx_params->off_duration = 0;
+		gx_params->on_duration = 0;
+		pr_debug("suspend modulation disabled: cpu runs 100%% speed.\n");
+	}
+
+	gx_write_byte(PCI_MODOFF, gx_params->off_duration);
+	gx_write_byte(PCI_MODON, gx_params->on_duration);
+
+	gx_write_byte(PCI_SUSCFG, suscfg);
+	pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg);
+
+	local_irq_restore(flags);
+
+	gx_params->pci_suscfg = suscfg;
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	pr_debug("suspend modulation w/ duration of ON:%d us, OFF:%d us\n",
+		gx_params->on_duration * 32, gx_params->off_duration * 32);
+	pr_debug("suspend modulation w/ clock speed: %d kHz.\n", freqs.new);
+}
+
+/****************************************************************
+ *             High level functions                             *
+ ****************************************************************/
+
+/*
+ *	cpufreq_gx_verify: test if frequency range is valid
+ *
+ *	This function checks if a given frequency range in kHz is valid
+ *      for the hardware supported by the driver.
+ */
+
+static int cpufreq_gx_verify(struct cpufreq_policy *policy)
+{
+	unsigned int tmp_freq = 0;
+	u8 tmp1, tmp2;
+
+	if (!stock_freq || !policy)
+		return -EINVAL;
+
+	policy->cpu = 0;
+	cpufreq_verify_within_limits(policy, (stock_freq / max_duration),
+			stock_freq);
+
+	/* it needs to be assured that at least one supported frequency is
+	 * within policy->min and policy->max. If it is not, policy->max
+	 * needs to be increased until one freuqency is supported.
+	 * policy->min may not be decreased, though. This way we guarantee a
+	 * specific processing capacity.
+	 */
+	tmp_freq = gx_validate_speed(policy->min, &tmp1, &tmp2);
+	if (tmp_freq < policy->min)
+		tmp_freq += stock_freq / max_duration;
+	policy->min = tmp_freq;
+	if (policy->min > policy->max)
+		policy->max = tmp_freq;
+	tmp_freq = gx_validate_speed(policy->max, &tmp1, &tmp2);
+	if (tmp_freq > policy->max)
+		tmp_freq -= stock_freq / max_duration;
+	policy->max = tmp_freq;
+	if (policy->max < policy->min)
+		policy->max = policy->min;
+	cpufreq_verify_within_limits(policy, (stock_freq / max_duration),
+			stock_freq);
+
+	return 0;
+}
+
+/*
+ *      cpufreq_gx_target:
+ *
+ */
+static int cpufreq_gx_target(struct cpufreq_policy *policy,
+			     unsigned int target_freq,
+			     unsigned int relation)
+{
+	u8 tmp1, tmp2;
+	unsigned int tmp_freq;
+
+	if (!stock_freq || !policy)
+		return -EINVAL;
+
+	policy->cpu = 0;
+
+	tmp_freq = gx_validate_speed(target_freq, &tmp1, &tmp2);
+	while (tmp_freq < policy->min) {
+		tmp_freq += stock_freq / max_duration;
+		tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2);
+	}
+	while (tmp_freq > policy->max) {
+		tmp_freq -= stock_freq / max_duration;
+		tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2);
+	}
+
+	gx_set_cpuspeed(tmp_freq);
+
+	return 0;
+}
+
+static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned int maxfreq, curfreq;
+
+	if (!policy || policy->cpu != 0)
+		return -ENODEV;
+
+	/* determine maximum frequency */
+	if (pci_busclk)
+		maxfreq = pci_busclk * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f];
+	else if (cpu_khz)
+		maxfreq = cpu_khz;
+	else
+		maxfreq = 30000 * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f];
+
+	stock_freq = maxfreq;
+	curfreq = gx_get_cpuspeed(0);
+
+	pr_debug("cpu max frequency is %d.\n", maxfreq);
+	pr_debug("cpu current frequency is %dkHz.\n", curfreq);
+
+	/* setup basic struct for cpufreq API */
+	policy->cpu = 0;
+
+	if (max_duration < POLICY_MIN_DIV)
+		policy->min = maxfreq / max_duration;
+	else
+		policy->min = maxfreq / POLICY_MIN_DIV;
+	policy->max = maxfreq;
+	policy->cur = curfreq;
+	policy->cpuinfo.min_freq = maxfreq / max_duration;
+	policy->cpuinfo.max_freq = maxfreq;
+	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+
+	return 0;
+}
+
+/*
+ * cpufreq_gx_init:
+ *   MediaGX/Geode GX initialize cpufreq driver
+ */
+static struct cpufreq_driver gx_suspmod_driver = {
+	.get		= gx_get_cpuspeed,
+	.verify		= cpufreq_gx_verify,
+	.target		= cpufreq_gx_target,
+	.init		= cpufreq_gx_cpu_init,
+	.name		= "gx-suspmod",
+	.owner		= THIS_MODULE,
+};
+
+static int __init cpufreq_gx_init(void)
+{
+	int ret;
+	struct gxfreq_params *params;
+	struct pci_dev *gx_pci;
+
+	/* Test if we have the right hardware */
+	gx_pci = gx_detect_chipset();
+	if (gx_pci == NULL)
+		return -ENODEV;
+
+	/* check whether module parameters are sane */
+	if (max_duration > 0xff)
+		max_duration = 0xff;
+
+	pr_debug("geode suspend modulation available.\n");
+
+	params = kzalloc(sizeof(struct gxfreq_params), GFP_KERNEL);
+	if (params == NULL)
+		return -ENOMEM;
+
+	params->cs55x0 = gx_pci;
+	gx_params = params;
+
+	/* keep cs55x0 configurations */
+	pci_read_config_byte(params->cs55x0, PCI_SUSCFG, &(params->pci_suscfg));
+	pci_read_config_byte(params->cs55x0, PCI_PMER1, &(params->pci_pmer1));
+	pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2));
+	pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration));
+	pci_read_config_byte(params->cs55x0, PCI_MODOFF,
+			&(params->off_duration));
+
+	ret = cpufreq_register_driver(&gx_suspmod_driver);
+	if (ret) {
+		kfree(params);
+		return ret;                   /* register error! */
+	}
+
+	return 0;
+}
+
+static void __exit cpufreq_gx_exit(void)
+{
+	cpufreq_unregister_driver(&gx_suspmod_driver);
+	pci_dev_put(gx_params->cs55x0);
+	kfree(gx_params);
+}
+
+MODULE_AUTHOR("Hiroshi Miura <miura@da-cha.org>");
+MODULE_DESCRIPTION("Cpufreq driver for Cyrix MediaGX and NatSemi Geode");
+MODULE_LICENSE("GPL");
+
+module_init(cpufreq_gx_init);
+module_exit(cpufreq_gx_exit);
+
diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c
new file mode 100644
index 00000000000..f47d26e2a13
--- /dev/null
+++ b/drivers/cpufreq/longhaul.c
@@ -0,0 +1,1024 @@
+/*
+ *  (C) 2001-2004  Dave Jones. <davej@redhat.com>
+ *  (C) 2002  Padraig Brady. <padraig@antefacto.com>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *  Based upon datasheets & sample CPUs kindly provided by VIA.
+ *
+ *  VIA have currently 3 different versions of Longhaul.
+ *  Version 1 (Longhaul) uses the BCR2 MSR at 0x1147.
+ *   It is present only in Samuel 1 (C5A), Samuel 2 (C5B) stepping 0.
+ *  Version 2 of longhaul is backward compatible with v1, but adds
+ *   LONGHAUL MSR for purpose of both frequency and voltage scaling.
+ *   Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C).
+ *  Version 3 of longhaul got renamed to Powersaver and redesigned
+ *   to use only the POWERSAVER MSR at 0x110a.
+ *   It is present in Ezra-T (C5M), Nehemiah (C5X) and above.
+ *   It's pretty much the same feature wise to longhaul v2, though
+ *   there is provision for scaling FSB too, but this doesn't work
+ *   too well in practice so we don't even try to use this.
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/timex.h>
+#include <linux/io.h>
+#include <linux/acpi.h>
+
+#include <asm/msr.h>
+#include <acpi/processor.h>
+
+#include "longhaul.h"
+
+#define PFX "longhaul: "
+
+#define TYPE_LONGHAUL_V1	1
+#define TYPE_LONGHAUL_V2	2
+#define TYPE_POWERSAVER		3
+
+#define	CPU_SAMUEL	1
+#define	CPU_SAMUEL2	2
+#define	CPU_EZRA	3
+#define	CPU_EZRA_T	4
+#define	CPU_NEHEMIAH	5
+#define	CPU_NEHEMIAH_C	6
+
+/* Flags */
+#define USE_ACPI_C3		(1 << 1)
+#define USE_NORTHBRIDGE		(1 << 2)
+
+static int cpu_model;
+static unsigned int numscales = 16;
+static unsigned int fsb;
+
+static const struct mV_pos *vrm_mV_table;
+static const unsigned char *mV_vrm_table;
+
+static unsigned int highest_speed, lowest_speed; /* kHz */
+static unsigned int minmult, maxmult;
+static int can_scale_voltage;
+static struct acpi_processor *pr;
+static struct acpi_processor_cx *cx;
+static u32 acpi_regs_addr;
+static u8 longhaul_flags;
+static unsigned int longhaul_index;
+
+/* Module parameters */
+static int scale_voltage;
+static int disable_acpi_c3;
+static int revid_errata;
+
+
+/* Clock ratios multiplied by 10 */
+static int mults[32];
+static int eblcr[32];
+static int longhaul_version;
+static struct cpufreq_frequency_table *longhaul_table;
+
+static char speedbuffer[8];
+
+static char *print_speed(int speed)
+{
+	if (speed < 1000) {
+		snprintf(speedbuffer, sizeof(speedbuffer), "%dMHz", speed);
+		return speedbuffer;
+	}
+
+	if (speed%1000 == 0)
+		snprintf(speedbuffer, sizeof(speedbuffer),
+			"%dGHz", speed/1000);
+	else
+		snprintf(speedbuffer, sizeof(speedbuffer),
+			"%d.%dGHz", speed/1000, (speed%1000)/100);
+
+	return speedbuffer;
+}
+
+
+static unsigned int calc_speed(int mult)
+{
+	int khz;
+	khz = (mult/10)*fsb;
+	if (mult%10)
+		khz += fsb/2;
+	khz *= 1000;
+	return khz;
+}
+
+
+static int longhaul_get_cpu_mult(void)
+{
+	unsigned long invalue = 0, lo, hi;
+
+	rdmsr(MSR_IA32_EBL_CR_POWERON, lo, hi);
+	invalue = (lo & (1<<22|1<<23|1<<24|1<<25))>>22;
+	if (longhaul_version == TYPE_LONGHAUL_V2 ||
+	    longhaul_version == TYPE_POWERSAVER) {
+		if (lo & (1<<27))
+			invalue += 16;
+	}
+	return eblcr[invalue];
+}
+
+/* For processor with BCR2 MSR */
+
+static void do_longhaul1(unsigned int mults_index)
+{
+	union msr_bcr2 bcr2;
+
+	rdmsrl(MSR_VIA_BCR2, bcr2.val);
+	/* Enable software clock multiplier */
+	bcr2.bits.ESOFTBF = 1;
+	bcr2.bits.CLOCKMUL = mults_index & 0xff;
+
+	/* Sync to timer tick */
+	safe_halt();
+	/* Change frequency on next halt or sleep */
+	wrmsrl(MSR_VIA_BCR2, bcr2.val);
+	/* Invoke transition */
+	ACPI_FLUSH_CPU_CACHE();
+	halt();
+
+	/* Disable software clock multiplier */
+	local_irq_disable();
+	rdmsrl(MSR_VIA_BCR2, bcr2.val);
+	bcr2.bits.ESOFTBF = 0;
+	wrmsrl(MSR_VIA_BCR2, bcr2.val);
+}
+
+/* For processor with Longhaul MSR */
+
+static void do_powersaver(int cx_address, unsigned int mults_index,
+			  unsigned int dir)
+{
+	union msr_longhaul longhaul;
+	u32 t;
+
+	rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+	/* Setup new frequency */
+	if (!revid_errata)
+		longhaul.bits.RevisionKey = longhaul.bits.RevisionID;
+	else
+		longhaul.bits.RevisionKey = 0;
+	longhaul.bits.SoftBusRatio = mults_index & 0xf;
+	longhaul.bits.SoftBusRatio4 = (mults_index & 0x10) >> 4;
+	/* Setup new voltage */
+	if (can_scale_voltage)
+		longhaul.bits.SoftVID = (mults_index >> 8) & 0x1f;
+	/* Sync to timer tick */
+	safe_halt();
+	/* Raise voltage if necessary */
+	if (can_scale_voltage && dir) {
+		longhaul.bits.EnableSoftVID = 1;
+		wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+		/* Change voltage */
+		if (!cx_address) {
+			ACPI_FLUSH_CPU_CACHE();
+			halt();
+		} else {
+			ACPI_FLUSH_CPU_CACHE();
+			/* Invoke C3 */
+			inb(cx_address);
+			/* Dummy op - must do something useless after P_LVL3
+			 * read */
+			t = inl(acpi_gbl_FADT.xpm_timer_block.address);
+		}
+		longhaul.bits.EnableSoftVID = 0;
+		wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+	}
+
+	/* Change frequency on next halt or sleep */
+	longhaul.bits.EnableSoftBusRatio = 1;
+	wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+	if (!cx_address) {
+		ACPI_FLUSH_CPU_CACHE();
+		halt();
+	} else {
+		ACPI_FLUSH_CPU_CACHE();
+		/* Invoke C3 */
+		inb(cx_address);
+		/* Dummy op - must do something useless after P_LVL3 read */
+		t = inl(acpi_gbl_FADT.xpm_timer_block.address);
+	}
+	/* Disable bus ratio bit */
+	longhaul.bits.EnableSoftBusRatio = 0;
+	wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+
+	/* Reduce voltage if necessary */
+	if (can_scale_voltage && !dir) {
+		longhaul.bits.EnableSoftVID = 1;
+		wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+		/* Change voltage */
+		if (!cx_address) {
+			ACPI_FLUSH_CPU_CACHE();
+			halt();
+		} else {
+			ACPI_FLUSH_CPU_CACHE();
+			/* Invoke C3 */
+			inb(cx_address);
+			/* Dummy op - must do something useless after P_LVL3
+			 * read */
+			t = inl(acpi_gbl_FADT.xpm_timer_block.address);
+		}
+		longhaul.bits.EnableSoftVID = 0;
+		wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+	}
+}
+
+/**
+ * longhaul_set_cpu_frequency()
+ * @mults_index : bitpattern of the new multiplier.
+ *
+ * Sets a new clock ratio.
+ */
+
+static void longhaul_setstate(unsigned int table_index)
+{
+	unsigned int mults_index;
+	int speed, mult;
+	struct cpufreq_freqs freqs;
+	unsigned long flags;
+	unsigned int pic1_mask, pic2_mask;
+	u16 bm_status = 0;
+	u32 bm_timeout = 1000;
+	unsigned int dir = 0;
+
+	mults_index = longhaul_table[table_index].index;
+	/* Safety precautions */
+	mult = mults[mults_index & 0x1f];
+	if (mult == -1)
+		return;
+	speed = calc_speed(mult);
+	if ((speed > highest_speed) || (speed < lowest_speed))
+		return;
+	/* Voltage transition before frequency transition? */
+	if (can_scale_voltage && longhaul_index < table_index)
+		dir = 1;
+
+	freqs.old = calc_speed(longhaul_get_cpu_mult());
+	freqs.new = speed;
+	freqs.cpu = 0; /* longhaul.c is UP only driver */
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	pr_debug("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n",
+			fsb, mult/10, mult%10, print_speed(speed/1000));
+retry_loop:
+	preempt_disable();
+	local_irq_save(flags);
+
+	pic2_mask = inb(0xA1);
+	pic1_mask = inb(0x21);	/* works on C3. save mask. */
+	outb(0xFF, 0xA1);	/* Overkill */
+	outb(0xFE, 0x21);	/* TMR0 only */
+
+	/* Wait while PCI bus is busy. */
+	if (acpi_regs_addr && (longhaul_flags & USE_NORTHBRIDGE
+	    || ((pr != NULL) && pr->flags.bm_control))) {
+		bm_status = inw(acpi_regs_addr);
+		bm_status &= 1 << 4;
+		while (bm_status && bm_timeout) {
+			outw(1 << 4, acpi_regs_addr);
+			bm_timeout--;
+			bm_status = inw(acpi_regs_addr);
+			bm_status &= 1 << 4;
+		}
+	}
+
+	if (longhaul_flags & USE_NORTHBRIDGE) {
+		/* Disable AGP and PCI arbiters */
+		outb(3, 0x22);
+	} else if ((pr != NULL) && pr->flags.bm_control) {
+		/* Disable bus master arbitration */
+		acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1);
+	}
+	switch (longhaul_version) {
+
+	/*
+	 * Longhaul v1. (Samuel[C5A] and Samuel2 stepping 0[C5B])
+	 * Software controlled multipliers only.
+	 */
+	case TYPE_LONGHAUL_V1:
+		do_longhaul1(mults_index);
+		break;
+
+	/*
+	 * Longhaul v2 appears in Samuel2 Steppings 1->7 [C5B] and Ezra [C5C]
+	 *
+	 * Longhaul v3 (aka Powersaver). (Ezra-T [C5M] & Nehemiah [C5N])
+	 * Nehemiah can do FSB scaling too, but this has never been proven
+	 * to work in practice.
+	 */
+	case TYPE_LONGHAUL_V2:
+	case TYPE_POWERSAVER:
+		if (longhaul_flags & USE_ACPI_C3) {
+			/* Don't allow wakeup */
+			acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
+			do_powersaver(cx->address, mults_index, dir);
+		} else {
+			do_powersaver(0, mults_index, dir);
+		}
+		break;
+	}
+
+	if (longhaul_flags & USE_NORTHBRIDGE) {
+		/* Enable arbiters */
+		outb(0, 0x22);
+	} else if ((pr != NULL) && pr->flags.bm_control) {
+		/* Enable bus master arbitration */
+		acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0);
+	}
+	outb(pic2_mask, 0xA1);	/* restore mask */
+	outb(pic1_mask, 0x21);
+
+	local_irq_restore(flags);
+	preempt_enable();
+
+	freqs.new = calc_speed(longhaul_get_cpu_mult());
+	/* Check if requested frequency is set. */
+	if (unlikely(freqs.new != speed)) {
+		printk(KERN_INFO PFX "Failed to set requested frequency!\n");
+		/* Revision ID = 1 but processor is expecting revision key
+		 * equal to 0. Jumpers at the bottom of processor will change
+		 * multiplier and FSB, but will not change bits in Longhaul
+		 * MSR nor enable voltage scaling. */
+		if (!revid_errata) {
+			printk(KERN_INFO PFX "Enabling \"Ignore Revision ID\" "
+						"option.\n");
+			revid_errata = 1;
+			msleep(200);
+			goto retry_loop;
+		}
+		/* Why ACPI C3 sometimes doesn't work is a mystery for me.
+		 * But it does happen. Processor is entering ACPI C3 state,
+		 * but it doesn't change frequency. I tried poking various
+		 * bits in northbridge registers, but without success. */
+		if (longhaul_flags & USE_ACPI_C3) {
+			printk(KERN_INFO PFX "Disabling ACPI C3 support.\n");
+			longhaul_flags &= ~USE_ACPI_C3;
+			if (revid_errata) {
+				printk(KERN_INFO PFX "Disabling \"Ignore "
+						"Revision ID\" option.\n");
+				revid_errata = 0;
+			}
+			msleep(200);
+			goto retry_loop;
+		}
+		/* This shouldn't happen. Longhaul ver. 2 was reported not
+		 * working on processors without voltage scaling, but with
+		 * RevID = 1. RevID errata will make things right. Just
+		 * to be 100% sure. */
+		if (longhaul_version == TYPE_LONGHAUL_V2) {
+			printk(KERN_INFO PFX "Switching to Longhaul ver. 1\n");
+			longhaul_version = TYPE_LONGHAUL_V1;
+			msleep(200);
+			goto retry_loop;
+		}
+	}
+	/* Report true CPU frequency */
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	if (!bm_timeout)
+		printk(KERN_INFO PFX "Warning: Timeout while waiting for "
+				"idle PCI bus.\n");
+}
+
+/*
+ * Centaur decided to make life a little more tricky.
+ * Only longhaul v1 is allowed to read EBLCR BSEL[0:1].
+ * Samuel2 and above have to try and guess what the FSB is.
+ * We do this by assuming we booted at maximum multiplier, and interpolate
+ * between that value multiplied by possible FSBs and cpu_mhz which
+ * was calculated at boot time. Really ugly, but no other way to do this.
+ */
+
+#define ROUNDING	0xf
+
+static int guess_fsb(int mult)
+{
+	int speed = cpu_khz / 1000;
+	int i;
+	int speeds[] = { 666, 1000, 1333, 2000 };
+	int f_max, f_min;
+
+	for (i = 0; i < 4; i++) {
+		f_max = ((speeds[i] * mult) + 50) / 100;
+		f_max += (ROUNDING / 2);
+		f_min = f_max - ROUNDING;
+		if ((speed <= f_max) && (speed >= f_min))
+			return speeds[i] / 10;
+	}
+	return 0;
+}
+
+
+static int __cpuinit longhaul_get_ranges(void)
+{
+	unsigned int i, j, k = 0;
+	unsigned int ratio;
+	int mult;
+
+	/* Get current frequency */
+	mult = longhaul_get_cpu_mult();
+	if (mult == -1) {
+		printk(KERN_INFO PFX "Invalid (reserved) multiplier!\n");
+		return -EINVAL;
+	}
+	fsb = guess_fsb(mult);
+	if (fsb == 0) {
+		printk(KERN_INFO PFX "Invalid (reserved) FSB!\n");
+		return -EINVAL;
+	}
+	/* Get max multiplier - as we always did.
+	 * Longhaul MSR is useful only when voltage scaling is enabled.
+	 * C3 is booting at max anyway. */
+	maxmult = mult;
+	/* Get min multiplier */
+	switch (cpu_model) {
+	case CPU_NEHEMIAH:
+		minmult = 50;
+		break;
+	case CPU_NEHEMIAH_C:
+		minmult = 40;
+		break;
+	default:
+		minmult = 30;
+		break;
+	}
+
+	pr_debug("MinMult:%d.%dx MaxMult:%d.%dx\n",
+		 minmult/10, minmult%10, maxmult/10, maxmult%10);
+
+	highest_speed = calc_speed(maxmult);
+	lowest_speed = calc_speed(minmult);
+	pr_debug("FSB:%dMHz  Lowest speed: %s   Highest speed:%s\n", fsb,
+		 print_speed(lowest_speed/1000),
+		 print_speed(highest_speed/1000));
+
+	if (lowest_speed == highest_speed) {
+		printk(KERN_INFO PFX "highestspeed == lowest, aborting.\n");
+		return -EINVAL;
+	}
+	if (lowest_speed > highest_speed) {
+		printk(KERN_INFO PFX "nonsense! lowest (%d > %d) !\n",
+			lowest_speed, highest_speed);
+		return -EINVAL;
+	}
+
+	longhaul_table = kmalloc((numscales + 1) * sizeof(*longhaul_table),
+			GFP_KERNEL);
+	if (!longhaul_table)
+		return -ENOMEM;
+
+	for (j = 0; j < numscales; j++) {
+		ratio = mults[j];
+		if (ratio == -1)
+			continue;
+		if (ratio > maxmult || ratio < minmult)
+			continue;
+		longhaul_table[k].frequency = calc_speed(ratio);
+		longhaul_table[k].index	= j;
+		k++;
+	}
+	if (k <= 1) {
+		kfree(longhaul_table);
+		return -ENODEV;
+	}
+	/* Sort */
+	for (j = 0; j < k - 1; j++) {
+		unsigned int min_f, min_i;
+		min_f = longhaul_table[j].frequency;
+		min_i = j;
+		for (i = j + 1; i < k; i++) {
+			if (longhaul_table[i].frequency < min_f) {
+				min_f = longhaul_table[i].frequency;
+				min_i = i;
+			}
+		}
+		if (min_i != j) {
+			swap(longhaul_table[j].frequency,
+			     longhaul_table[min_i].frequency);
+			swap(longhaul_table[j].index,
+			     longhaul_table[min_i].index);
+		}
+	}
+
+	longhaul_table[k].frequency = CPUFREQ_TABLE_END;
+
+	/* Find index we are running on */
+	for (j = 0; j < k; j++) {
+		if (mults[longhaul_table[j].index & 0x1f] == mult) {
+			longhaul_index = j;
+			break;
+		}
+	}
+	return 0;
+}
+
+
+static void __cpuinit longhaul_setup_voltagescaling(void)
+{
+	union msr_longhaul longhaul;
+	struct mV_pos minvid, maxvid, vid;
+	unsigned int j, speed, pos, kHz_step, numvscales;
+	int min_vid_speed;
+
+	rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+	if (!(longhaul.bits.RevisionID & 1)) {
+		printk(KERN_INFO PFX "Voltage scaling not supported by CPU.\n");
+		return;
+	}
+
+	if (!longhaul.bits.VRMRev) {
+		printk(KERN_INFO PFX "VRM 8.5\n");
+		vrm_mV_table = &vrm85_mV[0];
+		mV_vrm_table = &mV_vrm85[0];
+	} else {
+		printk(KERN_INFO PFX "Mobile VRM\n");
+		if (cpu_model < CPU_NEHEMIAH)
+			return;
+		vrm_mV_table = &mobilevrm_mV[0];
+		mV_vrm_table = &mV_mobilevrm[0];
+	}
+
+	minvid = vrm_mV_table[longhaul.bits.MinimumVID];
+	maxvid = vrm_mV_table[longhaul.bits.MaximumVID];
+
+	if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) {
+		printk(KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. "
+					"Voltage scaling disabled.\n",
+					minvid.mV/1000, minvid.mV%1000,
+					maxvid.mV/1000, maxvid.mV%1000);
+		return;
+	}
+
+	if (minvid.mV == maxvid.mV) {
+		printk(KERN_INFO PFX "Claims to support voltage scaling but "
+				"min & max are both %d.%03d. "
+				"Voltage scaling disabled\n",
+				maxvid.mV/1000, maxvid.mV%1000);
+		return;
+	}
+
+	/* How many voltage steps*/
+	numvscales = maxvid.pos - minvid.pos + 1;
+	printk(KERN_INFO PFX
+		"Max VID=%d.%03d  "
+		"Min VID=%d.%03d, "
+		"%d possible voltage scales\n",
+		maxvid.mV/1000, maxvid.mV%1000,
+		minvid.mV/1000, minvid.mV%1000,
+		numvscales);
+
+	/* Calculate max frequency at min voltage */
+	j = longhaul.bits.MinMHzBR;
+	if (longhaul.bits.MinMHzBR4)
+		j += 16;
+	min_vid_speed = eblcr[j];
+	if (min_vid_speed == -1)
+		return;
+	switch (longhaul.bits.MinMHzFSB) {
+	case 0:
+		min_vid_speed *= 13333;
+		break;
+	case 1:
+		min_vid_speed *= 10000;
+		break;
+	case 3:
+		min_vid_speed *= 6666;
+		break;
+	default:
+		return;
+		break;
+	}
+	if (min_vid_speed >= highest_speed)
+		return;
+	/* Calculate kHz for one voltage step */
+	kHz_step = (highest_speed - min_vid_speed) / numvscales;
+
+	j = 0;
+	while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) {
+		speed = longhaul_table[j].frequency;
+		if (speed > min_vid_speed)
+			pos = (speed - min_vid_speed) / kHz_step + minvid.pos;
+		else
+			pos = minvid.pos;
+		longhaul_table[j].index |= mV_vrm_table[pos] << 8;
+		vid = vrm_mV_table[mV_vrm_table[pos]];
+		printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n",
+				speed, j, vid.mV);
+		j++;
+	}
+
+	can_scale_voltage = 1;
+	printk(KERN_INFO PFX "Voltage scaling enabled.\n");
+}
+
+
+static int longhaul_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, longhaul_table);
+}
+
+
+static int longhaul_target(struct cpufreq_policy *policy,
+			    unsigned int target_freq, unsigned int relation)
+{
+	unsigned int table_index = 0;
+	unsigned int i;
+	unsigned int dir = 0;
+	u8 vid, current_vid;
+
+	if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq,
+				relation, &table_index))
+		return -EINVAL;
+
+	/* Don't set same frequency again */
+	if (longhaul_index == table_index)
+		return 0;
+
+	if (!can_scale_voltage)
+		longhaul_setstate(table_index);
+	else {
+		/* On test system voltage transitions exceeding single
+		 * step up or down were turning motherboard off. Both
+		 * "ondemand" and "userspace" are unsafe. C7 is doing
+		 * this in hardware, C3 is old and we need to do this
+		 * in software. */
+		i = longhaul_index;
+		current_vid = (longhaul_table[longhaul_index].index >> 8);
+		current_vid &= 0x1f;
+		if (table_index > longhaul_index)
+			dir = 1;
+		while (i != table_index) {
+			vid = (longhaul_table[i].index >> 8) & 0x1f;
+			if (vid != current_vid) {
+				longhaul_setstate(i);
+				current_vid = vid;
+				msleep(200);
+			}
+			if (dir)
+				i++;
+			else
+				i--;
+		}
+		longhaul_setstate(table_index);
+	}
+	longhaul_index = table_index;
+	return 0;
+}
+
+
+static unsigned int longhaul_get(unsigned int cpu)
+{
+	if (cpu)
+		return 0;
+	return calc_speed(longhaul_get_cpu_mult());
+}
+
+static acpi_status longhaul_walk_callback(acpi_handle obj_handle,
+					  u32 nesting_level,
+					  void *context, void **return_value)
+{
+	struct acpi_device *d;
+
+	if (acpi_bus_get_device(obj_handle, &d))
+		return 0;
+
+	*return_value = acpi_driver_data(d);
+	return 1;
+}
+
+/* VIA don't support PM2 reg, but have something similar */
+static int enable_arbiter_disable(void)
+{
+	struct pci_dev *dev;
+	int status = 1;
+	int reg;
+	u8 pci_cmd;
+
+	/* Find PLE133 host bridge */
+	reg = 0x78;
+	dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0,
+			     NULL);
+	/* Find PM133/VT8605 host bridge */
+	if (dev == NULL)
+		dev = pci_get_device(PCI_VENDOR_ID_VIA,
+				     PCI_DEVICE_ID_VIA_8605_0, NULL);
+	/* Find CLE266 host bridge */
+	if (dev == NULL) {
+		reg = 0x76;
+		dev = pci_get_device(PCI_VENDOR_ID_VIA,
+				     PCI_DEVICE_ID_VIA_862X_0, NULL);
+		/* Find CN400 V-Link host bridge */
+		if (dev == NULL)
+			dev = pci_get_device(PCI_VENDOR_ID_VIA, 0x7259, NULL);
+	}
+	if (dev != NULL) {
+		/* Enable access to port 0x22 */
+		pci_read_config_byte(dev, reg, &pci_cmd);
+		if (!(pci_cmd & 1<<7)) {
+			pci_cmd |= 1<<7;
+			pci_write_config_byte(dev, reg, pci_cmd);
+			pci_read_config_byte(dev, reg, &pci_cmd);
+			if (!(pci_cmd & 1<<7)) {
+				printk(KERN_ERR PFX
+					"Can't enable access to port 0x22.\n");
+				status = 0;
+			}
+		}
+		pci_dev_put(dev);
+		return status;
+	}
+	return 0;
+}
+
+static int longhaul_setup_southbridge(void)
+{
+	struct pci_dev *dev;
+	u8 pci_cmd;
+
+	/* Find VT8235 southbridge */
+	dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL);
+	if (dev == NULL)
+		/* Find VT8237 southbridge */
+		dev = pci_get_device(PCI_VENDOR_ID_VIA,
+				     PCI_DEVICE_ID_VIA_8237, NULL);
+	if (dev != NULL) {
+		/* Set transition time to max */
+		pci_read_config_byte(dev, 0xec, &pci_cmd);
+		pci_cmd &= ~(1 << 2);
+		pci_write_config_byte(dev, 0xec, pci_cmd);
+		pci_read_config_byte(dev, 0xe4, &pci_cmd);
+		pci_cmd &= ~(1 << 7);
+		pci_write_config_byte(dev, 0xe4, pci_cmd);
+		pci_read_config_byte(dev, 0xe5, &pci_cmd);
+		pci_cmd |= 1 << 7;
+		pci_write_config_byte(dev, 0xe5, pci_cmd);
+		/* Get address of ACPI registers block*/
+		pci_read_config_byte(dev, 0x81, &pci_cmd);
+		if (pci_cmd & 1 << 7) {
+			pci_read_config_dword(dev, 0x88, &acpi_regs_addr);
+			acpi_regs_addr &= 0xff00;
+			printk(KERN_INFO PFX "ACPI I/O at 0x%x\n",
+					acpi_regs_addr);
+		}
+
+		pci_dev_put(dev);
+		return 1;
+	}
+	return 0;
+}
+
+static int __cpuinit longhaul_cpu_init(struct cpufreq_policy *policy)
+{
+	struct cpuinfo_x86 *c = &cpu_data(0);
+	char *cpuname = NULL;
+	int ret;
+	u32 lo, hi;
+
+	/* Check what we have on this motherboard */
+	switch (c->x86_model) {
+	case 6:
+		cpu_model = CPU_SAMUEL;
+		cpuname = "C3 'Samuel' [C5A]";
+		longhaul_version = TYPE_LONGHAUL_V1;
+		memcpy(mults, samuel1_mults, sizeof(samuel1_mults));
+		memcpy(eblcr, samuel1_eblcr, sizeof(samuel1_eblcr));
+		break;
+
+	case 7:
+		switch (c->x86_mask) {
+		case 0:
+			longhaul_version = TYPE_LONGHAUL_V1;
+			cpu_model = CPU_SAMUEL2;
+			cpuname = "C3 'Samuel 2' [C5B]";
+			/* Note, this is not a typo, early Samuel2's had
+			 * Samuel1 ratios. */
+			memcpy(mults, samuel1_mults, sizeof(samuel1_mults));
+			memcpy(eblcr, samuel2_eblcr, sizeof(samuel2_eblcr));
+			break;
+		case 1 ... 15:
+			longhaul_version = TYPE_LONGHAUL_V2;
+			if (c->x86_mask < 8) {
+				cpu_model = CPU_SAMUEL2;
+				cpuname = "C3 'Samuel 2' [C5B]";
+			} else {
+				cpu_model = CPU_EZRA;
+				cpuname = "C3 'Ezra' [C5C]";
+			}
+			memcpy(mults, ezra_mults, sizeof(ezra_mults));
+			memcpy(eblcr, ezra_eblcr, sizeof(ezra_eblcr));
+			break;
+		}
+		break;
+
+	case 8:
+		cpu_model = CPU_EZRA_T;
+		cpuname = "C3 'Ezra-T' [C5M]";
+		longhaul_version = TYPE_POWERSAVER;
+		numscales = 32;
+		memcpy(mults, ezrat_mults, sizeof(ezrat_mults));
+		memcpy(eblcr, ezrat_eblcr, sizeof(ezrat_eblcr));
+		break;
+
+	case 9:
+		longhaul_version = TYPE_POWERSAVER;
+		numscales = 32;
+		memcpy(mults, nehemiah_mults, sizeof(nehemiah_mults));
+		memcpy(eblcr, nehemiah_eblcr, sizeof(nehemiah_eblcr));
+		switch (c->x86_mask) {
+		case 0 ... 1:
+			cpu_model = CPU_NEHEMIAH;
+			cpuname = "C3 'Nehemiah A' [C5XLOE]";
+			break;
+		case 2 ... 4:
+			cpu_model = CPU_NEHEMIAH;
+			cpuname = "C3 'Nehemiah B' [C5XLOH]";
+			break;
+		case 5 ... 15:
+			cpu_model = CPU_NEHEMIAH_C;
+			cpuname = "C3 'Nehemiah C' [C5P]";
+			break;
+		}
+		break;
+
+	default:
+		cpuname = "Unknown";
+		break;
+	}
+	/* Check Longhaul ver. 2 */
+	if (longhaul_version == TYPE_LONGHAUL_V2) {
+		rdmsr(MSR_VIA_LONGHAUL, lo, hi);
+		if (lo == 0 && hi == 0)
+			/* Looks like MSR isn't present */
+			longhaul_version = TYPE_LONGHAUL_V1;
+	}
+
+	printk(KERN_INFO PFX "VIA %s CPU detected.  ", cpuname);
+	switch (longhaul_version) {
+	case TYPE_LONGHAUL_V1:
+	case TYPE_LONGHAUL_V2:
+		printk(KERN_CONT "Longhaul v%d supported.\n", longhaul_version);
+		break;
+	case TYPE_POWERSAVER:
+		printk(KERN_CONT "Powersaver supported.\n");
+		break;
+	};
+
+	/* Doesn't hurt */
+	longhaul_setup_southbridge();
+
+	/* Find ACPI data for processor */
+	acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
+				ACPI_UINT32_MAX, &longhaul_walk_callback, NULL,
+				NULL, (void *)&pr);
+
+	/* Check ACPI support for C3 state */
+	if (pr != NULL && longhaul_version == TYPE_POWERSAVER) {
+		cx = &pr->power.states[ACPI_STATE_C3];
+		if (cx->address > 0 && cx->latency <= 1000)
+			longhaul_flags |= USE_ACPI_C3;
+	}
+	/* Disable if it isn't working */
+	if (disable_acpi_c3)
+		longhaul_flags &= ~USE_ACPI_C3;
+	/* Check if northbridge is friendly */
+	if (enable_arbiter_disable())
+		longhaul_flags |= USE_NORTHBRIDGE;
+
+	/* Check ACPI support for bus master arbiter disable */
+	if (!(longhaul_flags & USE_ACPI_C3
+	     || longhaul_flags & USE_NORTHBRIDGE)
+	    && ((pr == NULL) || !(pr->flags.bm_control))) {
+		printk(KERN_ERR PFX
+			"No ACPI support. Unsupported northbridge.\n");
+		return -ENODEV;
+	}
+
+	if (longhaul_flags & USE_NORTHBRIDGE)
+		printk(KERN_INFO PFX "Using northbridge support.\n");
+	if (longhaul_flags & USE_ACPI_C3)
+		printk(KERN_INFO PFX "Using ACPI support.\n");
+
+	ret = longhaul_get_ranges();
+	if (ret != 0)
+		return ret;
+
+	if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0))
+		longhaul_setup_voltagescaling();
+
+	policy->cpuinfo.transition_latency = 200000;	/* nsec */
+	policy->cur = calc_speed(longhaul_get_cpu_mult());
+
+	ret = cpufreq_frequency_table_cpuinfo(policy, longhaul_table);
+	if (ret)
+		return ret;
+
+	cpufreq_frequency_table_get_attr(longhaul_table, policy->cpu);
+
+	return 0;
+}
+
+static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	return 0;
+}
+
+static struct freq_attr *longhaul_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver longhaul_driver = {
+	.verify	= longhaul_verify,
+	.target	= longhaul_target,
+	.get	= longhaul_get,
+	.init	= longhaul_cpu_init,
+	.exit	= __devexit_p(longhaul_cpu_exit),
+	.name	= "longhaul",
+	.owner	= THIS_MODULE,
+	.attr	= longhaul_attr,
+};
+
+
+static int __init longhaul_init(void)
+{
+	struct cpuinfo_x86 *c = &cpu_data(0);
+
+	if (c->x86_vendor != X86_VENDOR_CENTAUR || c->x86 != 6)
+		return -ENODEV;
+
+#ifdef CONFIG_SMP
+	if (num_online_cpus() > 1) {
+		printk(KERN_ERR PFX "More than 1 CPU detected, "
+				"longhaul disabled.\n");
+		return -ENODEV;
+	}
+#endif
+#ifdef CONFIG_X86_IO_APIC
+	if (cpu_has_apic) {
+		printk(KERN_ERR PFX "APIC detected. Longhaul is currently "
+				"broken in this configuration.\n");
+		return -ENODEV;
+	}
+#endif
+	switch (c->x86_model) {
+	case 6 ... 9:
+		return cpufreq_register_driver(&longhaul_driver);
+	case 10:
+		printk(KERN_ERR PFX "Use acpi-cpufreq driver for VIA C7\n");
+	default:
+		;
+	}
+
+	return -ENODEV;
+}
+
+
+static void __exit longhaul_exit(void)
+{
+	int i;
+
+	for (i = 0; i < numscales; i++) {
+		if (mults[i] == maxmult) {
+			longhaul_setstate(i);
+			break;
+		}
+	}
+
+	cpufreq_unregister_driver(&longhaul_driver);
+	kfree(longhaul_table);
+}
+
+/* Even if BIOS is exporting ACPI C3 state, and it is used
+ * with success when CPU is idle, this state doesn't
+ * trigger frequency transition in some cases. */
+module_param(disable_acpi_c3, int, 0644);
+MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support");
+/* Change CPU voltage with frequency. Very useful to save
+ * power, but most VIA C3 processors aren't supporting it. */
+module_param(scale_voltage, int, 0644);
+MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor");
+/* Force revision key to 0 for processors which doesn't
+ * support voltage scaling, but are introducing itself as
+ * such. */
+module_param(revid_errata, int, 0644);
+MODULE_PARM_DESC(revid_errata, "Ignore CPU Revision ID");
+
+MODULE_AUTHOR("Dave Jones <davej@redhat.com>");
+MODULE_DESCRIPTION("Longhaul driver for VIA Cyrix processors.");
+MODULE_LICENSE("GPL");
+
+late_initcall(longhaul_init);
+module_exit(longhaul_exit);
diff --git a/drivers/cpufreq/longhaul.h b/drivers/cpufreq/longhaul.h
new file mode 100644
index 00000000000..cbf48fbca88
--- /dev/null
+++ b/drivers/cpufreq/longhaul.h
@@ -0,0 +1,353 @@
+/*
+ *  longhaul.h
+ *  (C) 2003 Dave Jones.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  VIA-specific information
+ */
+
+union msr_bcr2 {
+	struct {
+		unsigned Reseved:19,	// 18:0
+		ESOFTBF:1,		// 19
+		Reserved2:3,		// 22:20
+		CLOCKMUL:4,		// 26:23
+		Reserved3:5;		// 31:27
+	} bits;
+	unsigned long val;
+};
+
+union msr_longhaul {
+	struct {
+		unsigned RevisionID:4,	// 3:0
+		RevisionKey:4,		// 7:4
+		EnableSoftBusRatio:1,	// 8
+		EnableSoftVID:1,	// 9
+		EnableSoftBSEL:1,	// 10
+		Reserved:3,		// 11:13
+		SoftBusRatio4:1,	// 14
+		VRMRev:1,		// 15
+		SoftBusRatio:4,		// 19:16
+		SoftVID:5,		// 24:20
+		Reserved2:3,		// 27:25
+		SoftBSEL:2,		// 29:28
+		Reserved3:2,		// 31:30
+		MaxMHzBR:4,		// 35:32
+		MaximumVID:5,		// 40:36
+		MaxMHzFSB:2,		// 42:41
+		MaxMHzBR4:1,		// 43
+		Reserved4:4,		// 47:44
+		MinMHzBR:4,		// 51:48
+		MinimumVID:5,		// 56:52
+		MinMHzFSB:2,		// 58:57
+		MinMHzBR4:1,		// 59
+		Reserved5:4;		// 63:60
+	} bits;
+	unsigned long long val;
+};
+
+/*
+ * Clock ratio tables. Div/Mod by 10 to get ratio.
+ * The eblcr values specify the ratio read from the CPU.
+ * The mults values specify what to write to the CPU.
+ */
+
+/*
+ * VIA C3 Samuel 1  & Samuel 2 (stepping 0)
+ */
+static const int __cpuinitdata samuel1_mults[16] = {
+	-1, /* 0000 -> RESERVED */
+	30, /* 0001 ->  3.0x */
+	40, /* 0010 ->  4.0x */
+	-1, /* 0011 -> RESERVED */
+	-1, /* 0100 -> RESERVED */
+	35, /* 0101 ->  3.5x */
+	45, /* 0110 ->  4.5x */
+	55, /* 0111 ->  5.5x */
+	60, /* 1000 ->  6.0x */
+	70, /* 1001 ->  7.0x */
+	80, /* 1010 ->  8.0x */
+	50, /* 1011 ->  5.0x */
+	65, /* 1100 ->  6.5x */
+	75, /* 1101 ->  7.5x */
+	-1, /* 1110 -> RESERVED */
+	-1, /* 1111 -> RESERVED */
+};
+
+static const int __cpuinitdata samuel1_eblcr[16] = {
+	50, /* 0000 -> RESERVED */
+	30, /* 0001 ->  3.0x */
+	40, /* 0010 ->  4.0x */
+	-1, /* 0011 -> RESERVED */
+	55, /* 0100 ->  5.5x */
+	35, /* 0101 ->  3.5x */
+	45, /* 0110 ->  4.5x */
+	-1, /* 0111 -> RESERVED */
+	-1, /* 1000 -> RESERVED */
+	70, /* 1001 ->  7.0x */
+	80, /* 1010 ->  8.0x */
+	60, /* 1011 ->  6.0x */
+	-1, /* 1100 -> RESERVED */
+	75, /* 1101 ->  7.5x */
+	-1, /* 1110 -> RESERVED */
+	65, /* 1111 ->  6.5x */
+};
+
+/*
+ * VIA C3 Samuel2 Stepping 1->15
+ */
+static const int __cpuinitdata samuel2_eblcr[16] = {
+	50,  /* 0000 ->  5.0x */
+	30,  /* 0001 ->  3.0x */
+	40,  /* 0010 ->  4.0x */
+	100, /* 0011 -> 10.0x */
+	55,  /* 0100 ->  5.5x */
+	35,  /* 0101 ->  3.5x */
+	45,  /* 0110 ->  4.5x */
+	110, /* 0111 -> 11.0x */
+	90,  /* 1000 ->  9.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	60,  /* 1011 ->  6.0x */
+	120, /* 1100 -> 12.0x */
+	75,  /* 1101 ->  7.5x */
+	130, /* 1110 -> 13.0x */
+	65,  /* 1111 ->  6.5x */
+};
+
+/*
+ * VIA C3 Ezra
+ */
+static const int __cpuinitdata ezra_mults[16] = {
+	100, /* 0000 -> 10.0x */
+	30,  /* 0001 ->  3.0x */
+	40,  /* 0010 ->  4.0x */
+	90,  /* 0011 ->  9.0x */
+	95,  /* 0100 ->  9.5x */
+	35,  /* 0101 ->  3.5x */
+	45,  /* 0110 ->  4.5x */
+	55,  /* 0111 ->  5.5x */
+	60,  /* 1000 ->  6.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	50,  /* 1011 ->  5.0x */
+	65,  /* 1100 ->  6.5x */
+	75,  /* 1101 ->  7.5x */
+	85,  /* 1110 ->  8.5x */
+	120, /* 1111 -> 12.0x */
+};
+
+static const int __cpuinitdata ezra_eblcr[16] = {
+	50,  /* 0000 ->  5.0x */
+	30,  /* 0001 ->  3.0x */
+	40,  /* 0010 ->  4.0x */
+	100, /* 0011 -> 10.0x */
+	55,  /* 0100 ->  5.5x */
+	35,  /* 0101 ->  3.5x */
+	45,  /* 0110 ->  4.5x */
+	95,  /* 0111 ->  9.5x */
+	90,  /* 1000 ->  9.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	60,  /* 1011 ->  6.0x */
+	120, /* 1100 -> 12.0x */
+	75,  /* 1101 ->  7.5x */
+	85,  /* 1110 ->  8.5x */
+	65,  /* 1111 ->  6.5x */
+};
+
+/*
+ * VIA C3 (Ezra-T) [C5M].
+ */
+static const int __cpuinitdata ezrat_mults[32] = {
+	100, /* 0000 -> 10.0x */
+	30,  /* 0001 ->  3.0x */
+	40,  /* 0010 ->  4.0x */
+	90,  /* 0011 ->  9.0x */
+	95,  /* 0100 ->  9.5x */
+	35,  /* 0101 ->  3.5x */
+	45,  /* 0110 ->  4.5x */
+	55,  /* 0111 ->  5.5x */
+	60,  /* 1000 ->  6.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	50,  /* 1011 ->  5.0x */
+	65,  /* 1100 ->  6.5x */
+	75,  /* 1101 ->  7.5x */
+	85,  /* 1110 ->  8.5x */
+	120, /* 1111 ->  12.0x */
+
+	-1,  /* 0000 -> RESERVED (10.0x) */
+	110, /* 0001 -> 11.0x */
+	-1, /* 0010 -> 12.0x */
+	-1,  /* 0011 -> RESERVED (9.0x)*/
+	105, /* 0100 -> 10.5x */
+	115, /* 0101 -> 11.5x */
+	125, /* 0110 -> 12.5x */
+	135, /* 0111 -> 13.5x */
+	140, /* 1000 -> 14.0x */
+	150, /* 1001 -> 15.0x */
+	160, /* 1010 -> 16.0x */
+	130, /* 1011 -> 13.0x */
+	145, /* 1100 -> 14.5x */
+	155, /* 1101 -> 15.5x */
+	-1,  /* 1110 -> RESERVED (13.0x) */
+	-1,  /* 1111 -> RESERVED (12.0x) */
+};
+
+static const int __cpuinitdata ezrat_eblcr[32] = {
+	50,  /* 0000 ->  5.0x */
+	30,  /* 0001 ->  3.0x */
+	40,  /* 0010 ->  4.0x */
+	100, /* 0011 -> 10.0x */
+	55,  /* 0100 ->  5.5x */
+	35,  /* 0101 ->  3.5x */
+	45,  /* 0110 ->  4.5x */
+	95,  /* 0111 ->  9.5x */
+	90,  /* 1000 ->  9.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	60,  /* 1011 ->  6.0x */
+	120, /* 1100 -> 12.0x */
+	75,  /* 1101 ->  7.5x */
+	85,  /* 1110 ->  8.5x */
+	65,  /* 1111 ->  6.5x */
+
+	-1,  /* 0000 -> RESERVED (9.0x) */
+	110, /* 0001 -> 11.0x */
+	120, /* 0010 -> 12.0x */
+	-1,  /* 0011 -> RESERVED (10.0x)*/
+	135, /* 0100 -> 13.5x */
+	115, /* 0101 -> 11.5x */
+	125, /* 0110 -> 12.5x */
+	105, /* 0111 -> 10.5x */
+	130, /* 1000 -> 13.0x */
+	150, /* 1001 -> 15.0x */
+	160, /* 1010 -> 16.0x */
+	140, /* 1011 -> 14.0x */
+	-1,  /* 1100 -> RESERVED (12.0x) */
+	155, /* 1101 -> 15.5x */
+	-1,  /* 1110 -> RESERVED (13.0x) */
+	145, /* 1111 -> 14.5x */
+};
+
+/*
+ * VIA C3 Nehemiah */
+
+static const int __cpuinitdata nehemiah_mults[32] = {
+	100, /* 0000 -> 10.0x */
+	-1, /* 0001 -> 16.0x */
+	40,  /* 0010 ->  4.0x */
+	90,  /* 0011 ->  9.0x */
+	95,  /* 0100 ->  9.5x */
+	-1,  /* 0101 ->  RESERVED */
+	45,  /* 0110 ->  4.5x */
+	55,  /* 0111 ->  5.5x */
+	60,  /* 1000 ->  6.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	50,  /* 1011 ->  5.0x */
+	65,  /* 1100 ->  6.5x */
+	75,  /* 1101 ->  7.5x */
+	85,  /* 1110 ->  8.5x */
+	120, /* 1111 -> 12.0x */
+	-1, /* 0000 -> 10.0x */
+	110, /* 0001 -> 11.0x */
+	-1, /* 0010 -> 12.0x */
+	-1,  /* 0011 ->  9.0x */
+	105, /* 0100 -> 10.5x */
+	115, /* 0101 -> 11.5x */
+	125, /* 0110 -> 12.5x */
+	135, /* 0111 -> 13.5x */
+	140, /* 1000 -> 14.0x */
+	150, /* 1001 -> 15.0x */
+	160, /* 1010 -> 16.0x */
+	130, /* 1011 -> 13.0x */
+	145, /* 1100 -> 14.5x */
+	155, /* 1101 -> 15.5x */
+	-1,  /* 1110 -> RESERVED (13.0x) */
+	-1, /* 1111 -> 12.0x */
+};
+
+static const int __cpuinitdata nehemiah_eblcr[32] = {
+	50,  /* 0000 ->  5.0x */
+	160, /* 0001 -> 16.0x */
+	40,  /* 0010 ->  4.0x */
+	100, /* 0011 -> 10.0x */
+	55,  /* 0100 ->  5.5x */
+	-1,  /* 0101 ->  RESERVED */
+	45,  /* 0110 ->  4.5x */
+	95,  /* 0111 ->  9.5x */
+	90,  /* 1000 ->  9.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	60,  /* 1011 ->  6.0x */
+	120, /* 1100 -> 12.0x */
+	75,  /* 1101 ->  7.5x */
+	85,  /* 1110 ->  8.5x */
+	65,  /* 1111 ->  6.5x */
+	90,  /* 0000 ->  9.0x */
+	110, /* 0001 -> 11.0x */
+	120, /* 0010 -> 12.0x */
+	100, /* 0011 -> 10.0x */
+	135, /* 0100 -> 13.5x */
+	115, /* 0101 -> 11.5x */
+	125, /* 0110 -> 12.5x */
+	105, /* 0111 -> 10.5x */
+	130, /* 1000 -> 13.0x */
+	150, /* 1001 -> 15.0x */
+	160, /* 1010 -> 16.0x */
+	140, /* 1011 -> 14.0x */
+	120, /* 1100 -> 12.0x */
+	155, /* 1101 -> 15.5x */
+	-1,  /* 1110 -> RESERVED (13.0x) */
+	145 /* 1111 -> 14.5x */
+};
+
+/*
+ * Voltage scales. Div/Mod by 1000 to get actual voltage.
+ * Which scale to use depends on the VRM type in use.
+ */
+
+struct mV_pos {
+	unsigned short mV;
+	unsigned short pos;
+};
+
+static const struct mV_pos __cpuinitdata vrm85_mV[32] = {
+	{1250, 8},	{1200, 6},	{1150, 4},	{1100, 2},
+	{1050, 0},	{1800, 30},	{1750, 28},	{1700, 26},
+	{1650, 24},	{1600, 22},	{1550, 20},	{1500, 18},
+	{1450, 16},	{1400, 14},	{1350, 12},	{1300, 10},
+	{1275, 9},	{1225, 7},	{1175, 5},	{1125, 3},
+	{1075, 1},	{1825, 31},	{1775, 29},	{1725, 27},
+	{1675, 25},	{1625, 23},	{1575, 21},	{1525, 19},
+	{1475, 17},	{1425, 15},	{1375, 13},	{1325, 11}
+};
+
+static const unsigned char __cpuinitdata mV_vrm85[32] = {
+	0x04,	0x14,	0x03,	0x13,	0x02,	0x12,	0x01,	0x11,
+	0x00,	0x10,	0x0f,	0x1f,	0x0e,	0x1e,	0x0d,	0x1d,
+	0x0c,	0x1c,	0x0b,	0x1b,	0x0a,	0x1a,	0x09,	0x19,
+	0x08,	0x18,	0x07,	0x17,	0x06,	0x16,	0x05,	0x15
+};
+
+static const struct mV_pos __cpuinitdata mobilevrm_mV[32] = {
+	{1750, 31},	{1700, 30},	{1650, 29},	{1600, 28},
+	{1550, 27},	{1500, 26},	{1450, 25},	{1400, 24},
+	{1350, 23},	{1300, 22},	{1250, 21},	{1200, 20},
+	{1150, 19},	{1100, 18},	{1050, 17},	{1000, 16},
+	{975, 15},	{950, 14},	{925, 13},	{900, 12},
+	{875, 11},	{850, 10},	{825, 9},	{800, 8},
+	{775, 7},	{750, 6},	{725, 5},	{700, 4},
+	{675, 3},	{650, 2},	{625, 1},	{600, 0}
+};
+
+static const unsigned char __cpuinitdata mV_mobilevrm[32] = {
+	0x1f,	0x1e,	0x1d,	0x1c,	0x1b,	0x1a,	0x19,	0x18,
+	0x17,	0x16,	0x15,	0x14,	0x13,	0x12,	0x11,	0x10,
+	0x0f,	0x0e,	0x0d,	0x0c,	0x0b,	0x0a,	0x09,	0x08,
+	0x07,	0x06,	0x05,	0x04,	0x03,	0x02,	0x01,	0x00
+};
+
diff --git a/drivers/cpufreq/longrun.c b/drivers/cpufreq/longrun.c
new file mode 100644
index 00000000000..34ea359b370
--- /dev/null
+++ b/drivers/cpufreq/longrun.c
@@ -0,0 +1,324 @@
+/*
+ * (C) 2002 - 2003  Dominik Brodowski <linux@brodo.de>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/timex.h>
+
+#include <asm/msr.h>
+#include <asm/processor.h>
+
+static struct cpufreq_driver	longrun_driver;
+
+/**
+ * longrun_{low,high}_freq is needed for the conversion of cpufreq kHz
+ * values into per cent values. In TMTA microcode, the following is valid:
+ * performance_pctg = (current_freq - low_freq)/(high_freq - low_freq)
+ */
+static unsigned int longrun_low_freq, longrun_high_freq;
+
+
+/**
+ * longrun_get_policy - get the current LongRun policy
+ * @policy: struct cpufreq_policy where current policy is written into
+ *
+ * Reads the current LongRun policy by access to MSR_TMTA_LONGRUN_FLAGS
+ * and MSR_TMTA_LONGRUN_CTRL
+ */
+static void __cpuinit longrun_get_policy(struct cpufreq_policy *policy)
+{
+	u32 msr_lo, msr_hi;
+
+	rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
+	pr_debug("longrun flags are %x - %x\n", msr_lo, msr_hi);
+	if (msr_lo & 0x01)
+		policy->policy = CPUFREQ_POLICY_PERFORMANCE;
+	else
+		policy->policy = CPUFREQ_POLICY_POWERSAVE;
+
+	rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+	pr_debug("longrun ctrl is %x - %x\n", msr_lo, msr_hi);
+	msr_lo &= 0x0000007F;
+	msr_hi &= 0x0000007F;
+
+	if (longrun_high_freq <= longrun_low_freq) {
+		/* Assume degenerate Longrun table */
+		policy->min = policy->max = longrun_high_freq;
+	} else {
+		policy->min = longrun_low_freq + msr_lo *
+			((longrun_high_freq - longrun_low_freq) / 100);
+		policy->max = longrun_low_freq + msr_hi *
+			((longrun_high_freq - longrun_low_freq) / 100);
+	}
+	policy->cpu = 0;
+}
+
+
+/**
+ * longrun_set_policy - sets a new CPUFreq policy
+ * @policy: new policy
+ *
+ * Sets a new CPUFreq policy on LongRun-capable processors. This function
+ * has to be called with cpufreq_driver locked.
+ */
+static int longrun_set_policy(struct cpufreq_policy *policy)
+{
+	u32 msr_lo, msr_hi;
+	u32 pctg_lo, pctg_hi;
+
+	if (!policy)
+		return -EINVAL;
+
+	if (longrun_high_freq <= longrun_low_freq) {
+		/* Assume degenerate Longrun table */
+		pctg_lo = pctg_hi = 100;
+	} else {
+		pctg_lo = (policy->min - longrun_low_freq) /
+			((longrun_high_freq - longrun_low_freq) / 100);
+		pctg_hi = (policy->max - longrun_low_freq) /
+			((longrun_high_freq - longrun_low_freq) / 100);
+	}
+
+	if (pctg_hi > 100)
+		pctg_hi = 100;
+	if (pctg_lo > pctg_hi)
+		pctg_lo = pctg_hi;
+
+	/* performance or economy mode */
+	rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
+	msr_lo &= 0xFFFFFFFE;
+	switch (policy->policy) {
+	case CPUFREQ_POLICY_PERFORMANCE:
+		msr_lo |= 0x00000001;
+		break;
+	case CPUFREQ_POLICY_POWERSAVE:
+		break;
+	}
+	wrmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
+
+	/* lower and upper boundary */
+	rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+	msr_lo &= 0xFFFFFF80;
+	msr_hi &= 0xFFFFFF80;
+	msr_lo |= pctg_lo;
+	msr_hi |= pctg_hi;
+	wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+
+	return 0;
+}
+
+
+/**
+ * longrun_verify_poliy - verifies a new CPUFreq policy
+ * @policy: the policy to verify
+ *
+ * Validates a new CPUFreq policy. This function has to be called with
+ * cpufreq_driver locked.
+ */
+static int longrun_verify_policy(struct cpufreq_policy *policy)
+{
+	if (!policy)
+		return -EINVAL;
+
+	policy->cpu = 0;
+	cpufreq_verify_within_limits(policy,
+		policy->cpuinfo.min_freq,
+		policy->cpuinfo.max_freq);
+
+	if ((policy->policy != CPUFREQ_POLICY_POWERSAVE) &&
+	    (policy->policy != CPUFREQ_POLICY_PERFORMANCE))
+		return -EINVAL;
+
+	return 0;
+}
+
+static unsigned int longrun_get(unsigned int cpu)
+{
+	u32 eax, ebx, ecx, edx;
+
+	if (cpu)
+		return 0;
+
+	cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
+	pr_debug("cpuid eax is %u\n", eax);
+
+	return eax * 1000;
+}
+
+/**
+ * longrun_determine_freqs - determines the lowest and highest possible core frequency
+ * @low_freq: an int to put the lowest frequency into
+ * @high_freq: an int to put the highest frequency into
+ *
+ * Determines the lowest and highest possible core frequencies on this CPU.
+ * This is necessary to calculate the performance percentage according to
+ * TMTA rules:
+ * performance_pctg = (target_freq - low_freq)/(high_freq - low_freq)
+ */
+static int __cpuinit longrun_determine_freqs(unsigned int *low_freq,
+						      unsigned int *high_freq)
+{
+	u32 msr_lo, msr_hi;
+	u32 save_lo, save_hi;
+	u32 eax, ebx, ecx, edx;
+	u32 try_hi;
+	struct cpuinfo_x86 *c = &cpu_data(0);
+
+	if (!low_freq || !high_freq)
+		return -EINVAL;
+
+	if (cpu_has(c, X86_FEATURE_LRTI)) {
+		/* if the LongRun Table Interface is present, the
+		 * detection is a bit easier:
+		 * For minimum frequency, read out the maximum
+		 * level (msr_hi), write that into "currently
+		 * selected level", and read out the frequency.
+		 * For maximum frequency, read out level zero.
+		 */
+		/* minimum */
+		rdmsr(MSR_TMTA_LRTI_READOUT, msr_lo, msr_hi);
+		wrmsr(MSR_TMTA_LRTI_READOUT, msr_hi, msr_hi);
+		rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi);
+		*low_freq = msr_lo * 1000; /* to kHz */
+
+		/* maximum */
+		wrmsr(MSR_TMTA_LRTI_READOUT, 0, msr_hi);
+		rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi);
+		*high_freq = msr_lo * 1000; /* to kHz */
+
+		pr_debug("longrun table interface told %u - %u kHz\n",
+				*low_freq, *high_freq);
+
+		if (*low_freq > *high_freq)
+			*low_freq = *high_freq;
+		return 0;
+	}
+
+	/* set the upper border to the value determined during TSC init */
+	*high_freq = (cpu_khz / 1000);
+	*high_freq = *high_freq * 1000;
+	pr_debug("high frequency is %u kHz\n", *high_freq);
+
+	/* get current borders */
+	rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+	save_lo = msr_lo & 0x0000007F;
+	save_hi = msr_hi & 0x0000007F;
+
+	/* if current perf_pctg is larger than 90%, we need to decrease the
+	 * upper limit to make the calculation more accurate.
+	 */
+	cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
+	/* try decreasing in 10% steps, some processors react only
+	 * on some barrier values */
+	for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -= 10) {
+		/* set to 0 to try_hi perf_pctg */
+		msr_lo &= 0xFFFFFF80;
+		msr_hi &= 0xFFFFFF80;
+		msr_hi |= try_hi;
+		wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+
+		/* read out current core MHz and current perf_pctg */
+		cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
+
+		/* restore values */
+		wrmsr(MSR_TMTA_LONGRUN_CTRL, save_lo, save_hi);
+	}
+	pr_debug("percentage is %u %%, freq is %u MHz\n", ecx, eax);
+
+	/* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq)
+	 * eqals
+	 * low_freq * (1 - perf_pctg) = (cur_freq - high_freq * perf_pctg)
+	 *
+	 * high_freq * perf_pctg is stored tempoarily into "ebx".
+	 */
+	ebx = (((cpu_khz / 1000) * ecx) / 100); /* to MHz */
+
+	if ((ecx > 95) || (ecx == 0) || (eax < ebx))
+		return -EIO;
+
+	edx = ((eax - ebx) * 100) / (100 - ecx);
+	*low_freq = edx * 1000; /* back to kHz */
+
+	pr_debug("low frequency is %u kHz\n", *low_freq);
+
+	if (*low_freq > *high_freq)
+		*low_freq = *high_freq;
+
+	return 0;
+}
+
+
+static int __cpuinit longrun_cpu_init(struct cpufreq_policy *policy)
+{
+	int result = 0;
+
+	/* capability check */
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	/* detect low and high frequency */
+	result = longrun_determine_freqs(&longrun_low_freq, &longrun_high_freq);
+	if (result)
+		return result;
+
+	/* cpuinfo and default policy values */
+	policy->cpuinfo.min_freq = longrun_low_freq;
+	policy->cpuinfo.max_freq = longrun_high_freq;
+	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	longrun_get_policy(policy);
+
+	return 0;
+}
+
+
+static struct cpufreq_driver longrun_driver = {
+	.flags		= CPUFREQ_CONST_LOOPS,
+	.verify		= longrun_verify_policy,
+	.setpolicy	= longrun_set_policy,
+	.get		= longrun_get,
+	.init		= longrun_cpu_init,
+	.name		= "longrun",
+	.owner		= THIS_MODULE,
+};
+
+
+/**
+ * longrun_init - initializes the Transmeta Crusoe LongRun CPUFreq driver
+ *
+ * Initializes the LongRun support.
+ */
+static int __init longrun_init(void)
+{
+	struct cpuinfo_x86 *c = &cpu_data(0);
+
+	if (c->x86_vendor != X86_VENDOR_TRANSMETA ||
+	    !cpu_has(c, X86_FEATURE_LONGRUN))
+		return -ENODEV;
+
+	return cpufreq_register_driver(&longrun_driver);
+}
+
+
+/**
+ * longrun_exit - unregisters LongRun support
+ */
+static void __exit longrun_exit(void)
+{
+	cpufreq_unregister_driver(&longrun_driver);
+}
+
+
+MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("LongRun driver for Transmeta Crusoe and "
+		"Efficeon processors.");
+MODULE_LICENSE("GPL");
+
+module_init(longrun_init);
+module_exit(longrun_exit);
diff --git a/drivers/cpufreq/mperf.c b/drivers/cpufreq/mperf.c
new file mode 100644
index 00000000000..911e193018a
--- /dev/null
+++ b/drivers/cpufreq/mperf.c
@@ -0,0 +1,51 @@
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+
+#include "mperf.h"
+
+static DEFINE_PER_CPU(struct aperfmperf, acfreq_old_perf);
+
+/* Called via smp_call_function_single(), on the target CPU */
+static void read_measured_perf_ctrs(void *_cur)
+{
+	struct aperfmperf *am = _cur;
+
+	get_aperfmperf(am);
+}
+
+/*
+ * Return the measured active (C0) frequency on this CPU since last call
+ * to this function.
+ * Input: cpu number
+ * Return: Average CPU frequency in terms of max frequency (zero on error)
+ *
+ * We use IA32_MPERF and IA32_APERF MSRs to get the measured performance
+ * over a period of time, while CPU is in C0 state.
+ * IA32_MPERF counts at the rate of max advertised frequency
+ * IA32_APERF counts at the rate of actual CPU frequency
+ * Only IA32_APERF/IA32_MPERF ratio is architecturally defined and
+ * no meaning should be associated with absolute values of these MSRs.
+ */
+unsigned int cpufreq_get_measured_perf(struct cpufreq_policy *policy,
+					unsigned int cpu)
+{
+	struct aperfmperf perf;
+	unsigned long ratio;
+	unsigned int retval;
+
+	if (smp_call_function_single(cpu, read_measured_perf_ctrs, &perf, 1))
+		return 0;
+
+	ratio = calc_aperfmperf_ratio(&per_cpu(acfreq_old_perf, cpu), &perf);
+	per_cpu(acfreq_old_perf, cpu) = perf;
+
+	retval = (policy->cpuinfo.max_freq * ratio) >> APERFMPERF_SHIFT;
+
+	return retval;
+}
+EXPORT_SYMBOL_GPL(cpufreq_get_measured_perf);
+MODULE_LICENSE("GPL");
diff --git a/drivers/cpufreq/mperf.h b/drivers/cpufreq/mperf.h
new file mode 100644
index 00000000000..5dbf2950dc2
--- /dev/null
+++ b/drivers/cpufreq/mperf.h
@@ -0,0 +1,9 @@
+/*
+ *  (c) 2010 Advanced Micro Devices, Inc.
+ *  Your use of this code is subject to the terms and conditions of the
+ *  GNU general public license version 2. See "COPYING" or
+ *  http://www.gnu.org/licenses/gpl.html
+ */
+
+unsigned int cpufreq_get_measured_perf(struct cpufreq_policy *policy,
+					unsigned int cpu);
diff --git a/drivers/cpufreq/p4-clockmod.c b/drivers/cpufreq/p4-clockmod.c
new file mode 100644
index 00000000000..6be3e0760c2
--- /dev/null
+++ b/drivers/cpufreq/p4-clockmod.c
@@ -0,0 +1,329 @@
+/*
+ *	Pentium 4/Xeon CPU on demand clock modulation/speed scaling
+ *	(C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ *	(C) 2002 Zwane Mwaikambo <zwane@commfireservices.com>
+ *	(C) 2002 Arjan van de Ven <arjanv@redhat.com>
+ *	(C) 2002 Tora T. Engstad
+ *	All Rights Reserved
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ *      The author(s) of this software shall not be held liable for damages
+ *      of any nature resulting due to the use of this software. This
+ *      software is provided AS-IS with no warranties.
+ *
+ *	Date		Errata			Description
+ *	20020525	N44, O17	12.5% or 25% DC causes lockup
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/cpufreq.h>
+#include <linux/cpumask.h>
+#include <linux/timex.h>
+
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include <asm/timer.h>
+
+#include "speedstep-lib.h"
+
+#define PFX	"p4-clockmod: "
+
+/*
+ * Duty Cycle (3bits), note DC_DISABLE is not specified in
+ * intel docs i just use it to mean disable
+ */
+enum {
+	DC_RESV, DC_DFLT, DC_25PT, DC_38PT, DC_50PT,
+	DC_64PT, DC_75PT, DC_88PT, DC_DISABLE
+};
+
+#define DC_ENTRIES	8
+
+
+static int has_N44_O17_errata[NR_CPUS];
+static unsigned int stock_freq;
+static struct cpufreq_driver p4clockmod_driver;
+static unsigned int cpufreq_p4_get(unsigned int cpu);
+
+static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
+{
+	u32 l, h;
+
+	if (!cpu_online(cpu) ||
+	    (newstate > DC_DISABLE) || (newstate == DC_RESV))
+		return -EINVAL;
+
+	rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h);
+
+	if (l & 0x01)
+		pr_debug("CPU#%d currently thermal throttled\n", cpu);
+
+	if (has_N44_O17_errata[cpu] &&
+	    (newstate == DC_25PT || newstate == DC_DFLT))
+		newstate = DC_38PT;
+
+	rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);
+	if (newstate == DC_DISABLE) {
+		pr_debug("CPU#%d disabling modulation\n", cpu);
+		wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l & ~(1<<4), h);
+	} else {
+		pr_debug("CPU#%d setting duty cycle to %d%%\n",
+			cpu, ((125 * newstate) / 10));
+		/* bits 63 - 5	: reserved
+		 * bit  4	: enable/disable
+		 * bits 3-1	: duty cycle
+		 * bit  0	: reserved
+		 */
+		l = (l & ~14);
+		l = l | (1<<4) | ((newstate & 0x7)<<1);
+		wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l, h);
+	}
+
+	return 0;
+}
+
+
+static struct cpufreq_frequency_table p4clockmod_table[] = {
+	{DC_RESV, CPUFREQ_ENTRY_INVALID},
+	{DC_DFLT, 0},
+	{DC_25PT, 0},
+	{DC_38PT, 0},
+	{DC_50PT, 0},
+	{DC_64PT, 0},
+	{DC_75PT, 0},
+	{DC_88PT, 0},
+	{DC_DISABLE, 0},
+	{DC_RESV, CPUFREQ_TABLE_END},
+};
+
+
+static int cpufreq_p4_target(struct cpufreq_policy *policy,
+			     unsigned int target_freq,
+			     unsigned int relation)
+{
+	unsigned int    newstate = DC_RESV;
+	struct cpufreq_freqs freqs;
+	int i;
+
+	if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0],
+				target_freq, relation, &newstate))
+		return -EINVAL;
+
+	freqs.old = cpufreq_p4_get(policy->cpu);
+	freqs.new = stock_freq * p4clockmod_table[newstate].index / 8;
+
+	if (freqs.new == freqs.old)
+		return 0;
+
+	/* notifiers */
+	for_each_cpu(i, policy->cpus) {
+		freqs.cpu = i;
+		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	}
+
+	/* run on each logical CPU,
+	 * see section 13.15.3 of IA32 Intel Architecture Software
+	 * Developer's Manual, Volume 3
+	 */
+	for_each_cpu(i, policy->cpus)
+		cpufreq_p4_setdc(i, p4clockmod_table[newstate].index);
+
+	/* notifiers */
+	for_each_cpu(i, policy->cpus) {
+		freqs.cpu = i;
+		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	}
+
+	return 0;
+}
+
+
+static int cpufreq_p4_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, &p4clockmod_table[0]);
+}
+
+
+static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
+{
+	if (c->x86 == 0x06) {
+		if (cpu_has(c, X86_FEATURE_EST))
+			printk_once(KERN_WARNING PFX "Warning: EST-capable "
+			       "CPU detected. The acpi-cpufreq module offers "
+			       "voltage scaling in addition to frequency "
+			       "scaling. You should use that instead of "
+			       "p4-clockmod, if possible.\n");
+		switch (c->x86_model) {
+		case 0x0E: /* Core */
+		case 0x0F: /* Core Duo */
+		case 0x16: /* Celeron Core */
+		case 0x1C: /* Atom */
+			p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
+			return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE);
+		case 0x0D: /* Pentium M (Dothan) */
+			p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
+			/* fall through */
+		case 0x09: /* Pentium M (Banias) */
+			return speedstep_get_frequency(SPEEDSTEP_CPU_PM);
+		}
+	}
+
+	if (c->x86 != 0xF)
+		return 0;
+
+	/* on P-4s, the TSC runs with constant frequency independent whether
+	 * throttling is active or not. */
+	p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
+
+	if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) {
+		printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. "
+		       "The speedstep-ich or acpi cpufreq modules offer "
+		       "voltage scaling in addition of frequency scaling. "
+		       "You should use either one instead of p4-clockmod, "
+		       "if possible.\n");
+		return speedstep_get_frequency(SPEEDSTEP_CPU_P4M);
+	}
+
+	return speedstep_get_frequency(SPEEDSTEP_CPU_P4D);
+}
+
+
+
+static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
+{
+	struct cpuinfo_x86 *c = &cpu_data(policy->cpu);
+	int cpuid = 0;
+	unsigned int i;
+
+#ifdef CONFIG_SMP
+	cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu));
+#endif
+
+	/* Errata workaround */
+	cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_mask;
+	switch (cpuid) {
+	case 0x0f07:
+	case 0x0f0a:
+	case 0x0f11:
+	case 0x0f12:
+		has_N44_O17_errata[policy->cpu] = 1;
+		pr_debug("has errata -- disabling low frequencies\n");
+	}
+
+	if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4D &&
+	    c->x86_model < 2) {
+		/* switch to maximum frequency and measure result */
+		cpufreq_p4_setdc(policy->cpu, DC_DISABLE);
+		recalibrate_cpu_khz();
+	}
+	/* get max frequency */
+	stock_freq = cpufreq_p4_get_frequency(c);
+	if (!stock_freq)
+		return -EINVAL;
+
+	/* table init */
+	for (i = 1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) {
+		if ((i < 2) && (has_N44_O17_errata[policy->cpu]))
+			p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+		else
+			p4clockmod_table[i].frequency = (stock_freq * i)/8;
+	}
+	cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu);
+
+	/* cpuinfo and default policy values */
+
+	/* the transition latency is set to be 1 higher than the maximum
+	 * transition latency of the ondemand governor */
+	policy->cpuinfo.transition_latency = 10000001;
+	policy->cur = stock_freq;
+
+	return cpufreq_frequency_table_cpuinfo(policy, &p4clockmod_table[0]);
+}
+
+
+static int cpufreq_p4_cpu_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	return 0;
+}
+
+static unsigned int cpufreq_p4_get(unsigned int cpu)
+{
+	u32 l, h;
+
+	rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);
+
+	if (l & 0x10) {
+		l = l >> 1;
+		l &= 0x7;
+	} else
+		l = DC_DISABLE;
+
+	if (l != DC_DISABLE)
+		return stock_freq * l / 8;
+
+	return stock_freq;
+}
+
+static struct freq_attr *p4clockmod_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver p4clockmod_driver = {
+	.verify		= cpufreq_p4_verify,
+	.target		= cpufreq_p4_target,
+	.init		= cpufreq_p4_cpu_init,
+	.exit		= cpufreq_p4_cpu_exit,
+	.get		= cpufreq_p4_get,
+	.name		= "p4-clockmod",
+	.owner		= THIS_MODULE,
+	.attr		= p4clockmod_attr,
+};
+
+
+static int __init cpufreq_p4_init(void)
+{
+	struct cpuinfo_x86 *c = &cpu_data(0);
+	int ret;
+
+	/*
+	 * THERM_CONTROL is architectural for IA32 now, so
+	 * we can rely on the capability checks
+	 */
+	if (c->x86_vendor != X86_VENDOR_INTEL)
+		return -ENODEV;
+
+	if (!test_cpu_cap(c, X86_FEATURE_ACPI) ||
+				!test_cpu_cap(c, X86_FEATURE_ACC))
+		return -ENODEV;
+
+	ret = cpufreq_register_driver(&p4clockmod_driver);
+	if (!ret)
+		printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock "
+				"Modulation available\n");
+
+	return ret;
+}
+
+
+static void __exit cpufreq_p4_exit(void)
+{
+	cpufreq_unregister_driver(&p4clockmod_driver);
+}
+
+
+MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>");
+MODULE_DESCRIPTION("cpufreq driver for Pentium(TM) 4/Xeon(TM)");
+MODULE_LICENSE("GPL");
+
+late_initcall(cpufreq_p4_init);
+module_exit(cpufreq_p4_exit);
diff --git a/drivers/cpufreq/pcc-cpufreq.c b/drivers/cpufreq/pcc-cpufreq.c
new file mode 100644
index 00000000000..7b0603eb012
--- /dev/null
+++ b/drivers/cpufreq/pcc-cpufreq.c
@@ -0,0 +1,621 @@
+/*
+ *  pcc-cpufreq.c - Processor Clocking Control firmware cpufreq interface
+ *
+ *  Copyright (C) 2009 Red Hat, Matthew Garrett <mjg@redhat.com>
+ *  Copyright (C) 2009 Hewlett-Packard Development Company, L.P.
+ *	Nagananda Chumbalkar <nagananda.chumbalkar@hp.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or NON
+ *  INFRINGEMENT. See the GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/sched.h>
+#include <linux/cpufreq.h>
+#include <linux/compiler.h>
+#include <linux/slab.h>
+
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+
+#include <acpi/processor.h>
+
+#define PCC_VERSION	"1.10.00"
+#define POLL_LOOPS 	300
+
+#define CMD_COMPLETE 	0x1
+#define CMD_GET_FREQ 	0x0
+#define CMD_SET_FREQ 	0x1
+
+#define BUF_SZ		4
+
+struct pcc_register_resource {
+	u8 descriptor;
+	u16 length;
+	u8 space_id;
+	u8 bit_width;
+	u8 bit_offset;
+	u8 access_size;
+	u64 address;
+} __attribute__ ((packed));
+
+struct pcc_memory_resource {
+	u8 descriptor;
+	u16 length;
+	u8 space_id;
+	u8 resource_usage;
+	u8 type_specific;
+	u64 granularity;
+	u64 minimum;
+	u64 maximum;
+	u64 translation_offset;
+	u64 address_length;
+} __attribute__ ((packed));
+
+static struct cpufreq_driver pcc_cpufreq_driver;
+
+struct pcc_header {
+	u32 signature;
+	u16 length;
+	u8 major;
+	u8 minor;
+	u32 features;
+	u16 command;
+	u16 status;
+	u32 latency;
+	u32 minimum_time;
+	u32 maximum_time;
+	u32 nominal;
+	u32 throttled_frequency;
+	u32 minimum_frequency;
+};
+
+static void __iomem *pcch_virt_addr;
+static struct pcc_header __iomem *pcch_hdr;
+
+static DEFINE_SPINLOCK(pcc_lock);
+
+static struct acpi_generic_address doorbell;
+
+static u64 doorbell_preserve;
+static u64 doorbell_write;
+
+static u8 OSC_UUID[16] = {0x9F, 0x2C, 0x9B, 0x63, 0x91, 0x70, 0x1f, 0x49,
+			  0xBB, 0x4F, 0xA5, 0x98, 0x2F, 0xA1, 0xB5, 0x46};
+
+struct pcc_cpu {
+	u32 input_offset;
+	u32 output_offset;
+};
+
+static struct pcc_cpu __percpu *pcc_cpu_info;
+
+static int pcc_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+				     policy->cpuinfo.max_freq);
+	return 0;
+}
+
+static inline void pcc_cmd(void)
+{
+	u64 doorbell_value;
+	int i;
+
+	acpi_read(&doorbell_value, &doorbell);
+	acpi_write((doorbell_value & doorbell_preserve) | doorbell_write,
+		   &doorbell);
+
+	for (i = 0; i < POLL_LOOPS; i++) {
+		if (ioread16(&pcch_hdr->status) & CMD_COMPLETE)
+			break;
+	}
+}
+
+static inline void pcc_clear_mapping(void)
+{
+	if (pcch_virt_addr)
+		iounmap(pcch_virt_addr);
+	pcch_virt_addr = NULL;
+}
+
+static unsigned int pcc_get_freq(unsigned int cpu)
+{
+	struct pcc_cpu *pcc_cpu_data;
+	unsigned int curr_freq;
+	unsigned int freq_limit;
+	u16 status;
+	u32 input_buffer;
+	u32 output_buffer;
+
+	spin_lock(&pcc_lock);
+
+	pr_debug("get: get_freq for CPU %d\n", cpu);
+	pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu);
+
+	input_buffer = 0x1;
+	iowrite32(input_buffer,
+			(pcch_virt_addr + pcc_cpu_data->input_offset));
+	iowrite16(CMD_GET_FREQ, &pcch_hdr->command);
+
+	pcc_cmd();
+
+	output_buffer =
+		ioread32(pcch_virt_addr + pcc_cpu_data->output_offset);
+
+	/* Clear the input buffer - we are done with the current command */
+	memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ);
+
+	status = ioread16(&pcch_hdr->status);
+	if (status != CMD_COMPLETE) {
+		pr_debug("get: FAILED: for CPU %d, status is %d\n",
+			cpu, status);
+		goto cmd_incomplete;
+	}
+	iowrite16(0, &pcch_hdr->status);
+	curr_freq = (((ioread32(&pcch_hdr->nominal) * (output_buffer & 0xff))
+			/ 100) * 1000);
+
+	pr_debug("get: SUCCESS: (virtual) output_offset for cpu %d is "
+		"0x%p, contains a value of: 0x%x. Speed is: %d MHz\n",
+		cpu, (pcch_virt_addr + pcc_cpu_data->output_offset),
+		output_buffer, curr_freq);
+
+	freq_limit = (output_buffer >> 8) & 0xff;
+	if (freq_limit != 0xff) {
+		pr_debug("get: frequency for cpu %d is being temporarily"
+			" capped at %d\n", cpu, curr_freq);
+	}
+
+	spin_unlock(&pcc_lock);
+	return curr_freq;
+
+cmd_incomplete:
+	iowrite16(0, &pcch_hdr->status);
+	spin_unlock(&pcc_lock);
+	return 0;
+}
+
+static int pcc_cpufreq_target(struct cpufreq_policy *policy,
+			      unsigned int target_freq,
+			      unsigned int relation)
+{
+	struct pcc_cpu *pcc_cpu_data;
+	struct cpufreq_freqs freqs;
+	u16 status;
+	u32 input_buffer;
+	int cpu;
+
+	spin_lock(&pcc_lock);
+	cpu = policy->cpu;
+	pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu);
+
+	pr_debug("target: CPU %d should go to target freq: %d "
+		"(virtual) input_offset is 0x%p\n",
+		cpu, target_freq,
+		(pcch_virt_addr + pcc_cpu_data->input_offset));
+
+	freqs.new = target_freq;
+	freqs.cpu = cpu;
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	input_buffer = 0x1 | (((target_freq * 100)
+			       / (ioread32(&pcch_hdr->nominal) * 1000)) << 8);
+	iowrite32(input_buffer,
+			(pcch_virt_addr + pcc_cpu_data->input_offset));
+	iowrite16(CMD_SET_FREQ, &pcch_hdr->command);
+
+	pcc_cmd();
+
+	/* Clear the input buffer - we are done with the current command */
+	memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ);
+
+	status = ioread16(&pcch_hdr->status);
+	if (status != CMD_COMPLETE) {
+		pr_debug("target: FAILED for cpu %d, with status: 0x%x\n",
+			cpu, status);
+		goto cmd_incomplete;
+	}
+	iowrite16(0, &pcch_hdr->status);
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	pr_debug("target: was SUCCESSFUL for cpu %d\n", cpu);
+	spin_unlock(&pcc_lock);
+
+	return 0;
+
+cmd_incomplete:
+	iowrite16(0, &pcch_hdr->status);
+	spin_unlock(&pcc_lock);
+	return -EINVAL;
+}
+
+static int pcc_get_offset(int cpu)
+{
+	acpi_status status;
+	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+	union acpi_object *pccp, *offset;
+	struct pcc_cpu *pcc_cpu_data;
+	struct acpi_processor *pr;
+	int ret = 0;
+
+	pr = per_cpu(processors, cpu);
+	pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu);
+
+	status = acpi_evaluate_object(pr->handle, "PCCP", NULL, &buffer);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	pccp = buffer.pointer;
+	if (!pccp || pccp->type != ACPI_TYPE_PACKAGE) {
+		ret = -ENODEV;
+		goto out_free;
+	};
+
+	offset = &(pccp->package.elements[0]);
+	if (!offset || offset->type != ACPI_TYPE_INTEGER) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	pcc_cpu_data->input_offset = offset->integer.value;
+
+	offset = &(pccp->package.elements[1]);
+	if (!offset || offset->type != ACPI_TYPE_INTEGER) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	pcc_cpu_data->output_offset = offset->integer.value;
+
+	memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ);
+	memset_io((pcch_virt_addr + pcc_cpu_data->output_offset), 0, BUF_SZ);
+
+	pr_debug("pcc_get_offset: for CPU %d: pcc_cpu_data "
+		"input_offset: 0x%x, pcc_cpu_data output_offset: 0x%x\n",
+		cpu, pcc_cpu_data->input_offset, pcc_cpu_data->output_offset);
+out_free:
+	kfree(buffer.pointer);
+	return ret;
+}
+
+static int __init pcc_cpufreq_do_osc(acpi_handle *handle)
+{
+	acpi_status status;
+	struct acpi_object_list input;
+	struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
+	union acpi_object in_params[4];
+	union acpi_object *out_obj;
+	u32 capabilities[2];
+	u32 errors;
+	u32 supported;
+	int ret = 0;
+
+	input.count = 4;
+	input.pointer = in_params;
+	in_params[0].type               = ACPI_TYPE_BUFFER;
+	in_params[0].buffer.length      = 16;
+	in_params[0].buffer.pointer     = OSC_UUID;
+	in_params[1].type               = ACPI_TYPE_INTEGER;
+	in_params[1].integer.value      = 1;
+	in_params[2].type               = ACPI_TYPE_INTEGER;
+	in_params[2].integer.value      = 2;
+	in_params[3].type               = ACPI_TYPE_BUFFER;
+	in_params[3].buffer.length      = 8;
+	in_params[3].buffer.pointer     = (u8 *)&capabilities;
+
+	capabilities[0] = OSC_QUERY_ENABLE;
+	capabilities[1] = 0x1;
+
+	status = acpi_evaluate_object(*handle, "_OSC", &input, &output);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	if (!output.length)
+		return -ENODEV;
+
+	out_obj = output.pointer;
+	if (out_obj->type != ACPI_TYPE_BUFFER) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0);
+	if (errors) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	supported = *((u32 *)(out_obj->buffer.pointer + 4));
+	if (!(supported & 0x1)) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	kfree(output.pointer);
+	capabilities[0] = 0x0;
+	capabilities[1] = 0x1;
+
+	status = acpi_evaluate_object(*handle, "_OSC", &input, &output);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	if (!output.length)
+		return -ENODEV;
+
+	out_obj = output.pointer;
+	if (out_obj->type != ACPI_TYPE_BUFFER) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0);
+	if (errors) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	supported = *((u32 *)(out_obj->buffer.pointer + 4));
+	if (!(supported & 0x1)) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+out_free:
+	kfree(output.pointer);
+	return ret;
+}
+
+static int __init pcc_cpufreq_probe(void)
+{
+	acpi_status status;
+	struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
+	struct pcc_memory_resource *mem_resource;
+	struct pcc_register_resource *reg_resource;
+	union acpi_object *out_obj, *member;
+	acpi_handle handle, osc_handle, pcch_handle;
+	int ret = 0;
+
+	status = acpi_get_handle(NULL, "\\_SB", &handle);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	status = acpi_get_handle(handle, "PCCH", &pcch_handle);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	status = acpi_get_handle(handle, "_OSC", &osc_handle);
+	if (ACPI_SUCCESS(status)) {
+		ret = pcc_cpufreq_do_osc(&osc_handle);
+		if (ret)
+			pr_debug("probe: _OSC evaluation did not succeed\n");
+		/* Firmware's use of _OSC is optional */
+		ret = 0;
+	}
+
+	status = acpi_evaluate_object(handle, "PCCH", NULL, &output);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	out_obj = output.pointer;
+	if (out_obj->type != ACPI_TYPE_PACKAGE) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	member = &out_obj->package.elements[0];
+	if (member->type != ACPI_TYPE_BUFFER) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	mem_resource = (struct pcc_memory_resource *)member->buffer.pointer;
+
+	pr_debug("probe: mem_resource descriptor: 0x%x,"
+		" length: %d, space_id: %d, resource_usage: %d,"
+		" type_specific: %d, granularity: 0x%llx,"
+		" minimum: 0x%llx, maximum: 0x%llx,"
+		" translation_offset: 0x%llx, address_length: 0x%llx\n",
+		mem_resource->descriptor, mem_resource->length,
+		mem_resource->space_id, mem_resource->resource_usage,
+		mem_resource->type_specific, mem_resource->granularity,
+		mem_resource->minimum, mem_resource->maximum,
+		mem_resource->translation_offset,
+		mem_resource->address_length);
+
+	if (mem_resource->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	pcch_virt_addr = ioremap_nocache(mem_resource->minimum,
+					mem_resource->address_length);
+	if (pcch_virt_addr == NULL) {
+		pr_debug("probe: could not map shared mem region\n");
+		goto out_free;
+	}
+	pcch_hdr = pcch_virt_addr;
+
+	pr_debug("probe: PCCH header (virtual) addr: 0x%p\n", pcch_hdr);
+	pr_debug("probe: PCCH header is at physical address: 0x%llx,"
+		" signature: 0x%x, length: %d bytes, major: %d, minor: %d,"
+		" supported features: 0x%x, command field: 0x%x,"
+		" status field: 0x%x, nominal latency: %d us\n",
+		mem_resource->minimum, ioread32(&pcch_hdr->signature),
+		ioread16(&pcch_hdr->length), ioread8(&pcch_hdr->major),
+		ioread8(&pcch_hdr->minor), ioread32(&pcch_hdr->features),
+		ioread16(&pcch_hdr->command), ioread16(&pcch_hdr->status),
+		ioread32(&pcch_hdr->latency));
+
+	pr_debug("probe: min time between commands: %d us,"
+		" max time between commands: %d us,"
+		" nominal CPU frequency: %d MHz,"
+		" minimum CPU frequency: %d MHz,"
+		" minimum CPU frequency without throttling: %d MHz\n",
+		ioread32(&pcch_hdr->minimum_time),
+		ioread32(&pcch_hdr->maximum_time),
+		ioread32(&pcch_hdr->nominal),
+		ioread32(&pcch_hdr->throttled_frequency),
+		ioread32(&pcch_hdr->minimum_frequency));
+
+	member = &out_obj->package.elements[1];
+	if (member->type != ACPI_TYPE_BUFFER) {
+		ret = -ENODEV;
+		goto pcch_free;
+	}
+
+	reg_resource = (struct pcc_register_resource *)member->buffer.pointer;
+
+	doorbell.space_id = reg_resource->space_id;
+	doorbell.bit_width = reg_resource->bit_width;
+	doorbell.bit_offset = reg_resource->bit_offset;
+	doorbell.access_width = 64;
+	doorbell.address = reg_resource->address;
+
+	pr_debug("probe: doorbell: space_id is %d, bit_width is %d, "
+		"bit_offset is %d, access_width is %d, address is 0x%llx\n",
+		doorbell.space_id, doorbell.bit_width, doorbell.bit_offset,
+		doorbell.access_width, reg_resource->address);
+
+	member = &out_obj->package.elements[2];
+	if (member->type != ACPI_TYPE_INTEGER) {
+		ret = -ENODEV;
+		goto pcch_free;
+	}
+
+	doorbell_preserve = member->integer.value;
+
+	member = &out_obj->package.elements[3];
+	if (member->type != ACPI_TYPE_INTEGER) {
+		ret = -ENODEV;
+		goto pcch_free;
+	}
+
+	doorbell_write = member->integer.value;
+
+	pr_debug("probe: doorbell_preserve: 0x%llx,"
+		" doorbell_write: 0x%llx\n",
+		doorbell_preserve, doorbell_write);
+
+	pcc_cpu_info = alloc_percpu(struct pcc_cpu);
+	if (!pcc_cpu_info) {
+		ret = -ENOMEM;
+		goto pcch_free;
+	}
+
+	printk(KERN_DEBUG "pcc-cpufreq: (v%s) driver loaded with frequency"
+	       " limits: %d MHz, %d MHz\n", PCC_VERSION,
+	       ioread32(&pcch_hdr->minimum_frequency),
+	       ioread32(&pcch_hdr->nominal));
+	kfree(output.pointer);
+	return ret;
+pcch_free:
+	pcc_clear_mapping();
+out_free:
+	kfree(output.pointer);
+	return ret;
+}
+
+static int pcc_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned int cpu = policy->cpu;
+	unsigned int result = 0;
+
+	if (!pcch_virt_addr) {
+		result = -1;
+		goto out;
+	}
+
+	result = pcc_get_offset(cpu);
+	if (result) {
+		pr_debug("init: PCCP evaluation failed\n");
+		goto out;
+	}
+
+	policy->max = policy->cpuinfo.max_freq =
+		ioread32(&pcch_hdr->nominal) * 1000;
+	policy->min = policy->cpuinfo.min_freq =
+		ioread32(&pcch_hdr->minimum_frequency) * 1000;
+	policy->cur = pcc_get_freq(cpu);
+
+	if (!policy->cur) {
+		pr_debug("init: Unable to get current CPU frequency\n");
+		result = -EINVAL;
+		goto out;
+	}
+
+	pr_debug("init: policy->max is %d, policy->min is %d\n",
+		policy->max, policy->min);
+out:
+	return result;
+}
+
+static int pcc_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+	return 0;
+}
+
+static struct cpufreq_driver pcc_cpufreq_driver = {
+	.flags = CPUFREQ_CONST_LOOPS,
+	.get = pcc_get_freq,
+	.verify = pcc_cpufreq_verify,
+	.target = pcc_cpufreq_target,
+	.init = pcc_cpufreq_cpu_init,
+	.exit = pcc_cpufreq_cpu_exit,
+	.name = "pcc-cpufreq",
+	.owner = THIS_MODULE,
+};
+
+static int __init pcc_cpufreq_init(void)
+{
+	int ret;
+
+	if (acpi_disabled)
+		return 0;
+
+	ret = pcc_cpufreq_probe();
+	if (ret) {
+		pr_debug("pcc_cpufreq_init: PCCH evaluation failed\n");
+		return ret;
+	}
+
+	ret = cpufreq_register_driver(&pcc_cpufreq_driver);
+
+	return ret;
+}
+
+static void __exit pcc_cpufreq_exit(void)
+{
+	cpufreq_unregister_driver(&pcc_cpufreq_driver);
+
+	pcc_clear_mapping();
+
+	free_percpu(pcc_cpu_info);
+}
+
+MODULE_AUTHOR("Matthew Garrett, Naga Chumbalkar");
+MODULE_VERSION(PCC_VERSION);
+MODULE_DESCRIPTION("Processor Clocking Control interface driver");
+MODULE_LICENSE("GPL");
+
+late_initcall(pcc_cpufreq_init);
+module_exit(pcc_cpufreq_exit);
diff --git a/drivers/cpufreq/powernow-k6.c b/drivers/cpufreq/powernow-k6.c
new file mode 100644
index 00000000000..b3379d6a5c5
--- /dev/null
+++ b/drivers/cpufreq/powernow-k6.c
@@ -0,0 +1,261 @@
+/*
+ *  This file was based upon code in Powertweak Linux (http://powertweak.sf.net)
+ *  (C) 2000-2003  Dave Jones, Arjan van de Ven, Janne Pänkälä,
+ *                 Dominik Brodowski.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/io.h>
+
+#include <asm/msr.h>
+
+#define POWERNOW_IOPORT 0xfff0          /* it doesn't matter where, as long
+					   as it is unused */
+
+#define PFX "powernow-k6: "
+static unsigned int                     busfreq;   /* FSB, in 10 kHz */
+static unsigned int                     max_multiplier;
+
+
+/* Clock ratio multiplied by 10 - see table 27 in AMD#23446 */
+static struct cpufreq_frequency_table clock_ratio[] = {
+	{45,  /* 000 -> 4.5x */ 0},
+	{50,  /* 001 -> 5.0x */ 0},
+	{40,  /* 010 -> 4.0x */ 0},
+	{55,  /* 011 -> 5.5x */ 0},
+	{20,  /* 100 -> 2.0x */ 0},
+	{30,  /* 101 -> 3.0x */ 0},
+	{60,  /* 110 -> 6.0x */ 0},
+	{35,  /* 111 -> 3.5x */ 0},
+	{0, CPUFREQ_TABLE_END}
+};
+
+
+/**
+ * powernow_k6_get_cpu_multiplier - returns the current FSB multiplier
+ *
+ *   Returns the current setting of the frequency multiplier. Core clock
+ * speed is frequency of the Front-Side Bus multiplied with this value.
+ */
+static int powernow_k6_get_cpu_multiplier(void)
+{
+	u64 invalue = 0;
+	u32 msrval;
+
+	msrval = POWERNOW_IOPORT + 0x1;
+	wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
+	invalue = inl(POWERNOW_IOPORT + 0x8);
+	msrval = POWERNOW_IOPORT + 0x0;
+	wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
+
+	return clock_ratio[(invalue >> 5)&7].index;
+}
+
+
+/**
+ * powernow_k6_set_state - set the PowerNow! multiplier
+ * @best_i: clock_ratio[best_i] is the target multiplier
+ *
+ *   Tries to change the PowerNow! multiplier
+ */
+static void powernow_k6_set_state(unsigned int best_i)
+{
+	unsigned long outvalue = 0, invalue = 0;
+	unsigned long msrval;
+	struct cpufreq_freqs freqs;
+
+	if (clock_ratio[best_i].index > max_multiplier) {
+		printk(KERN_ERR PFX "invalid target frequency\n");
+		return;
+	}
+
+	freqs.old = busfreq * powernow_k6_get_cpu_multiplier();
+	freqs.new = busfreq * clock_ratio[best_i].index;
+	freqs.cpu = 0; /* powernow-k6.c is UP only driver */
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	/* we now need to transform best_i to the BVC format, see AMD#23446 */
+
+	outvalue = (1<<12) | (1<<10) | (1<<9) | (best_i<<5);
+
+	msrval = POWERNOW_IOPORT + 0x1;
+	wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
+	invalue = inl(POWERNOW_IOPORT + 0x8);
+	invalue = invalue & 0xf;
+	outvalue = outvalue | invalue;
+	outl(outvalue , (POWERNOW_IOPORT + 0x8));
+	msrval = POWERNOW_IOPORT + 0x0;
+	wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	return;
+}
+
+
+/**
+ * powernow_k6_verify - verifies a new CPUfreq policy
+ * @policy: new policy
+ *
+ * Policy must be within lowest and highest possible CPU Frequency,
+ * and at least one possible state must be within min and max.
+ */
+static int powernow_k6_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, &clock_ratio[0]);
+}
+
+
+/**
+ * powernow_k6_setpolicy - sets a new CPUFreq policy
+ * @policy: new policy
+ * @target_freq: the target frequency
+ * @relation: how that frequency relates to achieved frequency
+ *  (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ *
+ * sets a new CPUFreq policy
+ */
+static int powernow_k6_target(struct cpufreq_policy *policy,
+			       unsigned int target_freq,
+			       unsigned int relation)
+{
+	unsigned int newstate = 0;
+
+	if (cpufreq_frequency_table_target(policy, &clock_ratio[0],
+				target_freq, relation, &newstate))
+		return -EINVAL;
+
+	powernow_k6_set_state(newstate);
+
+	return 0;
+}
+
+
+static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned int i, f;
+	int result;
+
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	/* get frequencies */
+	max_multiplier = powernow_k6_get_cpu_multiplier();
+	busfreq = cpu_khz / max_multiplier;
+
+	/* table init */
+	for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
+		f = clock_ratio[i].index;
+		if (f > max_multiplier)
+			clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID;
+		else
+			clock_ratio[i].frequency = busfreq * f;
+	}
+
+	/* cpuinfo and default policy values */
+	policy->cpuinfo.transition_latency = 200000;
+	policy->cur = busfreq * max_multiplier;
+
+	result = cpufreq_frequency_table_cpuinfo(policy, clock_ratio);
+	if (result)
+		return result;
+
+	cpufreq_frequency_table_get_attr(clock_ratio, policy->cpu);
+
+	return 0;
+}
+
+
+static int powernow_k6_cpu_exit(struct cpufreq_policy *policy)
+{
+	unsigned int i;
+	for (i = 0; i < 8; i++) {
+		if (i == max_multiplier)
+			powernow_k6_set_state(i);
+	}
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	return 0;
+}
+
+static unsigned int powernow_k6_get(unsigned int cpu)
+{
+	unsigned int ret;
+	ret = (busfreq * powernow_k6_get_cpu_multiplier());
+	return ret;
+}
+
+static struct freq_attr *powernow_k6_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver powernow_k6_driver = {
+	.verify		= powernow_k6_verify,
+	.target		= powernow_k6_target,
+	.init		= powernow_k6_cpu_init,
+	.exit		= powernow_k6_cpu_exit,
+	.get		= powernow_k6_get,
+	.name		= "powernow-k6",
+	.owner		= THIS_MODULE,
+	.attr		= powernow_k6_attr,
+};
+
+
+/**
+ * powernow_k6_init - initializes the k6 PowerNow! CPUFreq driver
+ *
+ *   Initializes the K6 PowerNow! support. Returns -ENODEV on unsupported
+ * devices, -EINVAL or -ENOMEM on problems during initiatization, and zero
+ * on success.
+ */
+static int __init powernow_k6_init(void)
+{
+	struct cpuinfo_x86 *c = &cpu_data(0);
+
+	if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 5) ||
+		((c->x86_model != 12) && (c->x86_model != 13)))
+		return -ENODEV;
+
+	if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) {
+		printk(KERN_INFO PFX "PowerNow IOPORT region already used.\n");
+		return -EIO;
+	}
+
+	if (cpufreq_register_driver(&powernow_k6_driver)) {
+		release_region(POWERNOW_IOPORT, 16);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+
+/**
+ * powernow_k6_exit - unregisters AMD K6-2+/3+ PowerNow! support
+ *
+ *   Unregisters AMD K6-2+ / K6-3+ PowerNow! support.
+ */
+static void __exit powernow_k6_exit(void)
+{
+	cpufreq_unregister_driver(&powernow_k6_driver);
+	release_region(POWERNOW_IOPORT, 16);
+}
+
+
+MODULE_AUTHOR("Arjan van de Ven, Dave Jones <davej@redhat.com>, "
+		"Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("PowerNow! driver for AMD K6-2+ / K6-3+ processors.");
+MODULE_LICENSE("GPL");
+
+module_init(powernow_k6_init);
+module_exit(powernow_k6_exit);
diff --git a/drivers/cpufreq/powernow-k7.c b/drivers/cpufreq/powernow-k7.c
new file mode 100644
index 00000000000..d71d9f37235
--- /dev/null
+++ b/drivers/cpufreq/powernow-k7.c
@@ -0,0 +1,747 @@
+/*
+ *  AMD K7 Powernow driver.
+ *  (C) 2003 Dave Jones on behalf of SuSE Labs.
+ *  (C) 2003-2004 Dave Jones <davej@redhat.com>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *  Based upon datasheets & sample CPUs kindly provided by AMD.
+ *
+ * Errata 5:
+ *  CPU may fail to execute a FID/VID change in presence of interrupt.
+ *  - We cli/sti on stepping A0 CPUs around the FID/VID transition.
+ * Errata 15:
+ *  CPU with half frequency multipliers may hang upon wakeup from disconnect.
+ *  - We disable half multipliers if ACPI is used on A0 stepping CPUs.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/dmi.h>
+#include <linux/timex.h>
+#include <linux/io.h>
+
+#include <asm/timer.h>		/* Needed for recalibrate_cpu_khz() */
+#include <asm/msr.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+#include <linux/acpi.h>
+#include <acpi/processor.h>
+#endif
+
+#include "powernow-k7.h"
+
+#define PFX "powernow: "
+
+
+struct psb_s {
+	u8 signature[10];
+	u8 tableversion;
+	u8 flags;
+	u16 settlingtime;
+	u8 reserved1;
+	u8 numpst;
+};
+
+struct pst_s {
+	u32 cpuid;
+	u8 fsbspeed;
+	u8 maxfid;
+	u8 startvid;
+	u8 numpstates;
+};
+
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+union powernow_acpi_control_t {
+	struct {
+		unsigned long fid:5,
+			vid:5,
+			sgtc:20,
+			res1:2;
+	} bits;
+	unsigned long val;
+};
+#endif
+
+/* divide by 1000 to get VCore voltage in V. */
+static const int mobile_vid_table[32] = {
+    2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650,
+    1600, 1550, 1500, 1450, 1400, 1350, 1300, 0,
+    1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100,
+    1075, 1050, 1025, 1000, 975, 950, 925, 0,
+};
+
+/* divide by 10 to get FID. */
+static const int fid_codes[32] = {
+    110, 115, 120, 125, 50, 55, 60, 65,
+    70, 75, 80, 85, 90, 95, 100, 105,
+    30, 190, 40, 200, 130, 135, 140, 210,
+    150, 225, 160, 165, 170, 180, -1, -1,
+};
+
+/* This parameter is used in order to force ACPI instead of legacy method for
+ * configuration purpose.
+ */
+
+static int acpi_force;
+
+static struct cpufreq_frequency_table *powernow_table;
+
+static unsigned int can_scale_bus;
+static unsigned int can_scale_vid;
+static unsigned int minimum_speed = -1;
+static unsigned int maximum_speed;
+static unsigned int number_scales;
+static unsigned int fsb;
+static unsigned int latency;
+static char have_a0;
+
+static int check_fsb(unsigned int fsbspeed)
+{
+	int delta;
+	unsigned int f = fsb / 1000;
+
+	delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed;
+	return delta < 5;
+}
+
+static int check_powernow(void)
+{
+	struct cpuinfo_x86 *c = &cpu_data(0);
+	unsigned int maxei, eax, ebx, ecx, edx;
+
+	if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 6)) {
+#ifdef MODULE
+		printk(KERN_INFO PFX "This module only works with "
+				"AMD K7 CPUs\n");
+#endif
+		return 0;
+	}
+
+	/* Get maximum capabilities */
+	maxei = cpuid_eax(0x80000000);
+	if (maxei < 0x80000007) {	/* Any powernow info ? */
+#ifdef MODULE
+		printk(KERN_INFO PFX "No powernow capabilities detected\n");
+#endif
+		return 0;
+	}
+
+	if ((c->x86_model == 6) && (c->x86_mask == 0)) {
+		printk(KERN_INFO PFX "K7 660[A0] core detected, "
+				"enabling errata workarounds\n");
+		have_a0 = 1;
+	}
+
+	cpuid(0x80000007, &eax, &ebx, &ecx, &edx);
+
+	/* Check we can actually do something before we say anything.*/
+	if (!(edx & (1 << 1 | 1 << 2)))
+		return 0;
+
+	printk(KERN_INFO PFX "PowerNOW! Technology present. Can scale: ");
+
+	if (edx & 1 << 1) {
+		printk("frequency");
+		can_scale_bus = 1;
+	}
+
+	if ((edx & (1 << 1 | 1 << 2)) == 0x6)
+		printk(" and ");
+
+	if (edx & 1 << 2) {
+		printk("voltage");
+		can_scale_vid = 1;
+	}
+
+	printk(".\n");
+	return 1;
+}
+
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+static void invalidate_entry(unsigned int entry)
+{
+	powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
+}
+#endif
+
+static int get_ranges(unsigned char *pst)
+{
+	unsigned int j;
+	unsigned int speed;
+	u8 fid, vid;
+
+	powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) *
+				(number_scales + 1)), GFP_KERNEL);
+	if (!powernow_table)
+		return -ENOMEM;
+
+	for (j = 0 ; j < number_scales; j++) {
+		fid = *pst++;
+
+		powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10;
+		powernow_table[j].index = fid; /* lower 8 bits */
+
+		speed = powernow_table[j].frequency;
+
+		if ((fid_codes[fid] % 10) == 5) {
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+			if (have_a0 == 1)
+				invalidate_entry(j);
+#endif
+		}
+
+		if (speed < minimum_speed)
+			minimum_speed = speed;
+		if (speed > maximum_speed)
+			maximum_speed = speed;
+
+		vid = *pst++;
+		powernow_table[j].index |= (vid << 8); /* upper 8 bits */
+
+		pr_debug("   FID: 0x%x (%d.%dx [%dMHz])  "
+			 "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
+			 fid_codes[fid] % 10, speed/1000, vid,
+			 mobile_vid_table[vid]/1000,
+			 mobile_vid_table[vid]%1000);
+	}
+	powernow_table[number_scales].frequency = CPUFREQ_TABLE_END;
+	powernow_table[number_scales].index = 0;
+
+	return 0;
+}
+
+
+static void change_FID(int fid)
+{
+	union msr_fidvidctl fidvidctl;
+
+	rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
+	if (fidvidctl.bits.FID != fid) {
+		fidvidctl.bits.SGTC = latency;
+		fidvidctl.bits.FID = fid;
+		fidvidctl.bits.VIDC = 0;
+		fidvidctl.bits.FIDC = 1;
+		wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
+	}
+}
+
+
+static void change_VID(int vid)
+{
+	union msr_fidvidctl fidvidctl;
+
+	rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
+	if (fidvidctl.bits.VID != vid) {
+		fidvidctl.bits.SGTC = latency;
+		fidvidctl.bits.VID = vid;
+		fidvidctl.bits.FIDC = 0;
+		fidvidctl.bits.VIDC = 1;
+		wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
+	}
+}
+
+
+static void change_speed(unsigned int index)
+{
+	u8 fid, vid;
+	struct cpufreq_freqs freqs;
+	union msr_fidvidstatus fidvidstatus;
+	int cfid;
+
+	/* fid are the lower 8 bits of the index we stored into
+	 * the cpufreq frequency table in powernow_decode_bios,
+	 * vid are the upper 8 bits.
+	 */
+
+	fid = powernow_table[index].index & 0xFF;
+	vid = (powernow_table[index].index & 0xFF00) >> 8;
+
+	freqs.cpu = 0;
+
+	rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
+	cfid = fidvidstatus.bits.CFID;
+	freqs.old = fsb * fid_codes[cfid] / 10;
+
+	freqs.new = powernow_table[index].frequency;
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	/* Now do the magic poking into the MSRs.  */
+
+	if (have_a0 == 1)	/* A0 errata 5 */
+		local_irq_disable();
+
+	if (freqs.old > freqs.new) {
+		/* Going down, so change FID first */
+		change_FID(fid);
+		change_VID(vid);
+	} else {
+		/* Going up, so change VID first */
+		change_VID(vid);
+		change_FID(fid);
+	}
+
+
+	if (have_a0 == 1)
+		local_irq_enable();
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+}
+
+
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+
+static struct acpi_processor_performance *acpi_processor_perf;
+
+static int powernow_acpi_init(void)
+{
+	int i;
+	int retval = 0;
+	union powernow_acpi_control_t pc;
+
+	if (acpi_processor_perf != NULL && powernow_table != NULL) {
+		retval = -EINVAL;
+		goto err0;
+	}
+
+	acpi_processor_perf = kzalloc(sizeof(struct acpi_processor_performance),
+				      GFP_KERNEL);
+	if (!acpi_processor_perf) {
+		retval = -ENOMEM;
+		goto err0;
+	}
+
+	if (!zalloc_cpumask_var(&acpi_processor_perf->shared_cpu_map,
+								GFP_KERNEL)) {
+		retval = -ENOMEM;
+		goto err05;
+	}
+
+	if (acpi_processor_register_performance(acpi_processor_perf, 0)) {
+		retval = -EIO;
+		goto err1;
+	}
+
+	if (acpi_processor_perf->control_register.space_id !=
+			ACPI_ADR_SPACE_FIXED_HARDWARE) {
+		retval = -ENODEV;
+		goto err2;
+	}
+
+	if (acpi_processor_perf->status_register.space_id !=
+			ACPI_ADR_SPACE_FIXED_HARDWARE) {
+		retval = -ENODEV;
+		goto err2;
+	}
+
+	number_scales = acpi_processor_perf->state_count;
+
+	if (number_scales < 2) {
+		retval = -ENODEV;
+		goto err2;
+	}
+
+	powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) *
+				(number_scales + 1)), GFP_KERNEL);
+	if (!powernow_table) {
+		retval = -ENOMEM;
+		goto err2;
+	}
+
+	pc.val = (unsigned long) acpi_processor_perf->states[0].control;
+	for (i = 0; i < number_scales; i++) {
+		u8 fid, vid;
+		struct acpi_processor_px *state =
+			&acpi_processor_perf->states[i];
+		unsigned int speed, speed_mhz;
+
+		pc.val = (unsigned long) state->control;
+		pr_debug("acpi:  P%d: %d MHz %d mW %d uS control %08x SGTC %d\n",
+			 i,
+			 (u32) state->core_frequency,
+			 (u32) state->power,
+			 (u32) state->transition_latency,
+			 (u32) state->control,
+			 pc.bits.sgtc);
+
+		vid = pc.bits.vid;
+		fid = pc.bits.fid;
+
+		powernow_table[i].frequency = fsb * fid_codes[fid] / 10;
+		powernow_table[i].index = fid; /* lower 8 bits */
+		powernow_table[i].index |= (vid << 8); /* upper 8 bits */
+
+		speed = powernow_table[i].frequency;
+		speed_mhz = speed / 1000;
+
+		/* processor_perflib will multiply the MHz value by 1000 to
+		 * get a KHz value (e.g. 1266000). However, powernow-k7 works
+		 * with true KHz values (e.g. 1266768). To ensure that all
+		 * powernow frequencies are available, we must ensure that
+		 * ACPI doesn't restrict them, so we round up the MHz value
+		 * to ensure that perflib's computed KHz value is greater than
+		 * or equal to powernow's KHz value.
+		 */
+		if (speed % 1000 > 0)
+			speed_mhz++;
+
+		if ((fid_codes[fid] % 10) == 5) {
+			if (have_a0 == 1)
+				invalidate_entry(i);
+		}
+
+		pr_debug("   FID: 0x%x (%d.%dx [%dMHz])  "
+			 "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
+			 fid_codes[fid] % 10, speed_mhz, vid,
+			 mobile_vid_table[vid]/1000,
+			 mobile_vid_table[vid]%1000);
+
+		if (state->core_frequency != speed_mhz) {
+			state->core_frequency = speed_mhz;
+			pr_debug("   Corrected ACPI frequency to %d\n",
+				speed_mhz);
+		}
+
+		if (latency < pc.bits.sgtc)
+			latency = pc.bits.sgtc;
+
+		if (speed < minimum_speed)
+			minimum_speed = speed;
+		if (speed > maximum_speed)
+			maximum_speed = speed;
+	}
+
+	powernow_table[i].frequency = CPUFREQ_TABLE_END;
+	powernow_table[i].index = 0;
+
+	/* notify BIOS that we exist */
+	acpi_processor_notify_smm(THIS_MODULE);
+
+	return 0;
+
+err2:
+	acpi_processor_unregister_performance(acpi_processor_perf, 0);
+err1:
+	free_cpumask_var(acpi_processor_perf->shared_cpu_map);
+err05:
+	kfree(acpi_processor_perf);
+err0:
+	printk(KERN_WARNING PFX "ACPI perflib can not be used on "
+			"this platform\n");
+	acpi_processor_perf = NULL;
+	return retval;
+}
+#else
+static int powernow_acpi_init(void)
+{
+	printk(KERN_INFO PFX "no support for ACPI processor found."
+	       "  Please recompile your kernel with ACPI processor\n");
+	return -EINVAL;
+}
+#endif
+
+static void print_pst_entry(struct pst_s *pst, unsigned int j)
+{
+	pr_debug("PST:%d (@%p)\n", j, pst);
+	pr_debug(" cpuid: 0x%x  fsb: %d  maxFID: 0x%x  startvid: 0x%x\n",
+		pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid);
+}
+
+static int powernow_decode_bios(int maxfid, int startvid)
+{
+	struct psb_s *psb;
+	struct pst_s *pst;
+	unsigned int i, j;
+	unsigned char *p;
+	unsigned int etuple;
+	unsigned int ret;
+
+	etuple = cpuid_eax(0x80000001);
+
+	for (i = 0xC0000; i < 0xffff0 ; i += 16) {
+
+		p = phys_to_virt(i);
+
+		if (memcmp(p, "AMDK7PNOW!",  10) == 0) {
+			pr_debug("Found PSB header at %p\n", p);
+			psb = (struct psb_s *) p;
+			pr_debug("Table version: 0x%x\n", psb->tableversion);
+			if (psb->tableversion != 0x12) {
+				printk(KERN_INFO PFX "Sorry, only v1.2 tables"
+						" supported right now\n");
+				return -ENODEV;
+			}
+
+			pr_debug("Flags: 0x%x\n", psb->flags);
+			if ((psb->flags & 1) == 0)
+				pr_debug("Mobile voltage regulator\n");
+			else
+				pr_debug("Desktop voltage regulator\n");
+
+			latency = psb->settlingtime;
+			if (latency < 100) {
+				printk(KERN_INFO PFX "BIOS set settling time "
+						"to %d microseconds. "
+						"Should be at least 100. "
+						"Correcting.\n", latency);
+				latency = 100;
+			}
+			pr_debug("Settling Time: %d microseconds.\n",
+					psb->settlingtime);
+			pr_debug("Has %d PST tables. (Only dumping ones "
+					"relevant to this CPU).\n",
+					psb->numpst);
+
+			p += sizeof(struct psb_s);
+
+			pst = (struct pst_s *) p;
+
+			for (j = 0; j < psb->numpst; j++) {
+				pst = (struct pst_s *) p;
+				number_scales = pst->numpstates;
+
+				if ((etuple == pst->cpuid) &&
+				    check_fsb(pst->fsbspeed) &&
+				    (maxfid == pst->maxfid) &&
+				    (startvid == pst->startvid)) {
+					print_pst_entry(pst, j);
+					p = (char *)pst + sizeof(struct pst_s);
+					ret = get_ranges(p);
+					return ret;
+				} else {
+					unsigned int k;
+					p = (char *)pst + sizeof(struct pst_s);
+					for (k = 0; k < number_scales; k++)
+						p += 2;
+				}
+			}
+			printk(KERN_INFO PFX "No PST tables match this cpuid "
+					"(0x%x)\n", etuple);
+			printk(KERN_INFO PFX "This is indicative of a broken "
+					"BIOS.\n");
+
+			return -EINVAL;
+		}
+		p++;
+	}
+
+	return -ENODEV;
+}
+
+
+static int powernow_target(struct cpufreq_policy *policy,
+			    unsigned int target_freq,
+			    unsigned int relation)
+{
+	unsigned int newstate;
+
+	if (cpufreq_frequency_table_target(policy, powernow_table, target_freq,
+				relation, &newstate))
+		return -EINVAL;
+
+	change_speed(newstate);
+
+	return 0;
+}
+
+
+static int powernow_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, powernow_table);
+}
+
+/*
+ * We use the fact that the bus frequency is somehow
+ * a multiple of 100000/3 khz, then we compute sgtc according
+ * to this multiple.
+ * That way, we match more how AMD thinks all of that work.
+ * We will then get the same kind of behaviour already tested under
+ * the "well-known" other OS.
+ */
+static int __cpuinit fixup_sgtc(void)
+{
+	unsigned int sgtc;
+	unsigned int m;
+
+	m = fsb / 3333;
+	if ((m % 10) >= 5)
+		m += 5;
+
+	m /= 10;
+
+	sgtc = 100 * m * latency;
+	sgtc = sgtc / 3;
+	if (sgtc > 0xfffff) {
+		printk(KERN_WARNING PFX "SGTC too large %d\n", sgtc);
+		sgtc = 0xfffff;
+	}
+	return sgtc;
+}
+
+static unsigned int powernow_get(unsigned int cpu)
+{
+	union msr_fidvidstatus fidvidstatus;
+	unsigned int cfid;
+
+	if (cpu)
+		return 0;
+	rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
+	cfid = fidvidstatus.bits.CFID;
+
+	return fsb * fid_codes[cfid] / 10;
+}
+
+
+static int __cpuinit acer_cpufreq_pst(const struct dmi_system_id *d)
+{
+	printk(KERN_WARNING PFX
+		"%s laptop with broken PST tables in BIOS detected.\n",
+		d->ident);
+	printk(KERN_WARNING PFX
+		"You need to downgrade to 3A21 (09/09/2002), or try a newer "
+		"BIOS than 3A71 (01/20/2003)\n");
+	printk(KERN_WARNING PFX
+		"cpufreq scaling has been disabled as a result of this.\n");
+	return 0;
+}
+
+/*
+ * Some Athlon laptops have really fucked PST tables.
+ * A BIOS update is all that can save them.
+ * Mention this, and disable cpufreq.
+ */
+static struct dmi_system_id __cpuinitdata powernow_dmi_table[] = {
+	{
+		.callback = acer_cpufreq_pst,
+		.ident = "Acer Aspire",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Insyde Software"),
+			DMI_MATCH(DMI_BIOS_VERSION, "3A71"),
+		},
+	},
+	{ }
+};
+
+static int __cpuinit powernow_cpu_init(struct cpufreq_policy *policy)
+{
+	union msr_fidvidstatus fidvidstatus;
+	int result;
+
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
+
+	recalibrate_cpu_khz();
+
+	fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID];
+	if (!fsb) {
+		printk(KERN_WARNING PFX "can not determine bus frequency\n");
+		return -EINVAL;
+	}
+	pr_debug("FSB: %3dMHz\n", fsb/1000);
+
+	if (dmi_check_system(powernow_dmi_table) || acpi_force) {
+		printk(KERN_INFO PFX "PSB/PST known to be broken.  "
+				"Trying ACPI instead\n");
+		result = powernow_acpi_init();
+	} else {
+		result = powernow_decode_bios(fidvidstatus.bits.MFID,
+				fidvidstatus.bits.SVID);
+		if (result) {
+			printk(KERN_INFO PFX "Trying ACPI perflib\n");
+			maximum_speed = 0;
+			minimum_speed = -1;
+			latency = 0;
+			result = powernow_acpi_init();
+			if (result) {
+				printk(KERN_INFO PFX
+					"ACPI and legacy methods failed\n");
+			}
+		} else {
+			/* SGTC use the bus clock as timer */
+			latency = fixup_sgtc();
+			printk(KERN_INFO PFX "SGTC: %d\n", latency);
+		}
+	}
+
+	if (result)
+		return result;
+
+	printk(KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n",
+				minimum_speed/1000, maximum_speed/1000);
+
+	policy->cpuinfo.transition_latency =
+		cpufreq_scale(2000000UL, fsb, latency);
+
+	policy->cur = powernow_get(0);
+
+	cpufreq_frequency_table_get_attr(powernow_table, policy->cpu);
+
+	return cpufreq_frequency_table_cpuinfo(policy, powernow_table);
+}
+
+static int powernow_cpu_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);
+
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+	if (acpi_processor_perf) {
+		acpi_processor_unregister_performance(acpi_processor_perf, 0);
+		free_cpumask_var(acpi_processor_perf->shared_cpu_map);
+		kfree(acpi_processor_perf);
+	}
+#endif
+
+	kfree(powernow_table);
+	return 0;
+}
+
+static struct freq_attr *powernow_table_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver powernow_driver = {
+	.verify		= powernow_verify,
+	.target		= powernow_target,
+	.get		= powernow_get,
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+	.bios_limit	= acpi_processor_get_bios_limit,
+#endif
+	.init		= powernow_cpu_init,
+	.exit		= powernow_cpu_exit,
+	.name		= "powernow-k7",
+	.owner		= THIS_MODULE,
+	.attr		= powernow_table_attr,
+};
+
+static int __init powernow_init(void)
+{
+	if (check_powernow() == 0)
+		return -ENODEV;
+	return cpufreq_register_driver(&powernow_driver);
+}
+
+
+static void __exit powernow_exit(void)
+{
+	cpufreq_unregister_driver(&powernow_driver);
+}
+
+module_param(acpi_force,  int, 0444);
+MODULE_PARM_DESC(acpi_force, "Force ACPI to be used.");
+
+MODULE_AUTHOR("Dave Jones <davej@redhat.com>");
+MODULE_DESCRIPTION("Powernow driver for AMD K7 processors.");
+MODULE_LICENSE("GPL");
+
+late_initcall(powernow_init);
+module_exit(powernow_exit);
+
diff --git a/drivers/cpufreq/powernow-k7.h b/drivers/cpufreq/powernow-k7.h
new file mode 100644
index 00000000000..35fb4eaf6e1
--- /dev/null
+++ b/drivers/cpufreq/powernow-k7.h
@@ -0,0 +1,43 @@
+/*
+ *  (C) 2003 Dave Jones.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  AMD-specific information
+ *
+ */
+
+union msr_fidvidctl {
+	struct {
+		unsigned FID:5,			// 4:0
+		reserved1:3,	// 7:5
+		VID:5,			// 12:8
+		reserved2:3,	// 15:13
+		FIDC:1,			// 16
+		VIDC:1,			// 17
+		reserved3:2,	// 19:18
+		FIDCHGRATIO:1,	// 20
+		reserved4:11,	// 31-21
+		SGTC:20,		// 32:51
+		reserved5:12;	// 63:52
+	} bits;
+	unsigned long long val;
+};
+
+union msr_fidvidstatus {
+	struct {
+		unsigned CFID:5,			// 4:0
+		reserved1:3,	// 7:5
+		SFID:5,			// 12:8
+		reserved2:3,	// 15:13
+		MFID:5,			// 20:16
+		reserved3:11,	// 31:21
+		CVID:5,			// 36:32
+		reserved4:3,	// 39:37
+		SVID:5,			// 44:40
+		reserved5:3,	// 47:45
+		MVID:5,			// 52:48
+		reserved6:11;	// 63:53
+	} bits;
+	unsigned long long val;
+};
diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c
new file mode 100644
index 00000000000..83479b6fb9a
--- /dev/null
+++ b/drivers/cpufreq/powernow-k8.c
@@ -0,0 +1,1607 @@
+/*
+ *   (c) 2003-2010 Advanced Micro Devices, Inc.
+ *  Your use of this code is subject to the terms and conditions of the
+ *  GNU general public license version 2. See "COPYING" or
+ *  http://www.gnu.org/licenses/gpl.html
+ *
+ *  Support : mark.langsdorf@amd.com
+ *
+ *  Based on the powernow-k7.c module written by Dave Jones.
+ *  (C) 2003 Dave Jones on behalf of SuSE Labs
+ *  (C) 2004 Dominik Brodowski <linux@brodo.de>
+ *  (C) 2004 Pavel Machek <pavel@ucw.cz>
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *  Based upon datasheets & sample CPUs kindly provided by AMD.
+ *
+ *  Valuable input gratefully received from Dave Jones, Pavel Machek,
+ *  Dominik Brodowski, Jacob Shin, and others.
+ *  Originally developed by Paul Devriendt.
+ *  Processor information obtained from Chapter 9 (Power and Thermal Management)
+ *  of the "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD
+ *  Opteron Processors" available for download from www.amd.com
+ *
+ *  Tables for specific CPUs can be inferred from
+ *     http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf
+ */
+
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/cpumask.h>
+#include <linux/sched.h>	/* for current / set_cpus_allowed() */
+#include <linux/io.h>
+#include <linux/delay.h>
+
+#include <asm/msr.h>
+
+#include <linux/acpi.h>
+#include <linux/mutex.h>
+#include <acpi/processor.h>
+
+#define PFX "powernow-k8: "
+#define VERSION "version 2.20.00"
+#include "powernow-k8.h"
+#include "mperf.h"
+
+/* serialize freq changes  */
+static DEFINE_MUTEX(fidvid_mutex);
+
+static DEFINE_PER_CPU(struct powernow_k8_data *, powernow_data);
+
+static int cpu_family = CPU_OPTERON;
+
+/* core performance boost */
+static bool cpb_capable, cpb_enabled;
+static struct msr __percpu *msrs;
+
+static struct cpufreq_driver cpufreq_amd64_driver;
+
+#ifndef CONFIG_SMP
+static inline const struct cpumask *cpu_core_mask(int cpu)
+{
+	return cpumask_of(0);
+}
+#endif
+
+/* Return a frequency in MHz, given an input fid */
+static u32 find_freq_from_fid(u32 fid)
+{
+	return 800 + (fid * 100);
+}
+
+/* Return a frequency in KHz, given an input fid */
+static u32 find_khz_freq_from_fid(u32 fid)
+{
+	return 1000 * find_freq_from_fid(fid);
+}
+
+static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data,
+		u32 pstate)
+{
+	return data[pstate].frequency;
+}
+
+/* Return the vco fid for an input fid
+ *
+ * Each "low" fid has corresponding "high" fid, and you can get to "low" fids
+ * only from corresponding high fids. This returns "high" fid corresponding to
+ * "low" one.
+ */
+static u32 convert_fid_to_vco_fid(u32 fid)
+{
+	if (fid < HI_FID_TABLE_BOTTOM)
+		return 8 + (2 * fid);
+	else
+		return fid;
+}
+
+/*
+ * Return 1 if the pending bit is set. Unless we just instructed the processor
+ * to transition to a new state, seeing this bit set is really bad news.
+ */
+static int pending_bit_stuck(void)
+{
+	u32 lo, hi;
+
+	if (cpu_family == CPU_HW_PSTATE)
+		return 0;
+
+	rdmsr(MSR_FIDVID_STATUS, lo, hi);
+	return lo & MSR_S_LO_CHANGE_PENDING ? 1 : 0;
+}
+
+/*
+ * Update the global current fid / vid values from the status msr.
+ * Returns 1 on error.
+ */
+static int query_current_values_with_pending_wait(struct powernow_k8_data *data)
+{
+	u32 lo, hi;
+	u32 i = 0;
+
+	if (cpu_family == CPU_HW_PSTATE) {
+		rdmsr(MSR_PSTATE_STATUS, lo, hi);
+		i = lo & HW_PSTATE_MASK;
+		data->currpstate = i;
+
+		/*
+		 * a workaround for family 11h erratum 311 might cause
+		 * an "out-of-range Pstate if the core is in Pstate-0
+		 */
+		if ((boot_cpu_data.x86 == 0x11) && (i >= data->numps))
+			data->currpstate = HW_PSTATE_0;
+
+		return 0;
+	}
+	do {
+		if (i++ > 10000) {
+			pr_debug("detected change pending stuck\n");
+			return 1;
+		}
+		rdmsr(MSR_FIDVID_STATUS, lo, hi);
+	} while (lo & MSR_S_LO_CHANGE_PENDING);
+
+	data->currvid = hi & MSR_S_HI_CURRENT_VID;
+	data->currfid = lo & MSR_S_LO_CURRENT_FID;
+
+	return 0;
+}
+
+/* the isochronous relief time */
+static void count_off_irt(struct powernow_k8_data *data)
+{
+	udelay((1 << data->irt) * 10);
+	return;
+}
+
+/* the voltage stabilization time */
+static void count_off_vst(struct powernow_k8_data *data)
+{
+	udelay(data->vstable * VST_UNITS_20US);
+	return;
+}
+
+/* need to init the control msr to a safe value (for each cpu) */
+static void fidvid_msr_init(void)
+{
+	u32 lo, hi;
+	u8 fid, vid;
+
+	rdmsr(MSR_FIDVID_STATUS, lo, hi);
+	vid = hi & MSR_S_HI_CURRENT_VID;
+	fid = lo & MSR_S_LO_CURRENT_FID;
+	lo = fid | (vid << MSR_C_LO_VID_SHIFT);
+	hi = MSR_C_HI_STP_GNT_BENIGN;
+	pr_debug("cpu%d, init lo 0x%x, hi 0x%x\n", smp_processor_id(), lo, hi);
+	wrmsr(MSR_FIDVID_CTL, lo, hi);
+}
+
+/* write the new fid value along with the other control fields to the msr */
+static int write_new_fid(struct powernow_k8_data *data, u32 fid)
+{
+	u32 lo;
+	u32 savevid = data->currvid;
+	u32 i = 0;
+
+	if ((fid & INVALID_FID_MASK) || (data->currvid & INVALID_VID_MASK)) {
+		printk(KERN_ERR PFX "internal error - overflow on fid write\n");
+		return 1;
+	}
+
+	lo = fid;
+	lo |= (data->currvid << MSR_C_LO_VID_SHIFT);
+	lo |= MSR_C_LO_INIT_FID_VID;
+
+	pr_debug("writing fid 0x%x, lo 0x%x, hi 0x%x\n",
+		fid, lo, data->plllock * PLL_LOCK_CONVERSION);
+
+	do {
+		wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION);
+		if (i++ > 100) {
+			printk(KERN_ERR PFX
+				"Hardware error - pending bit very stuck - "
+				"no further pstate changes possible\n");
+			return 1;
+		}
+	} while (query_current_values_with_pending_wait(data));
+
+	count_off_irt(data);
+
+	if (savevid != data->currvid) {
+		printk(KERN_ERR PFX
+			"vid change on fid trans, old 0x%x, new 0x%x\n",
+			savevid, data->currvid);
+		return 1;
+	}
+
+	if (fid != data->currfid) {
+		printk(KERN_ERR PFX
+			"fid trans failed, fid 0x%x, curr 0x%x\n", fid,
+			data->currfid);
+		return 1;
+	}
+
+	return 0;
+}
+
+/* Write a new vid to the hardware */
+static int write_new_vid(struct powernow_k8_data *data, u32 vid)
+{
+	u32 lo;
+	u32 savefid = data->currfid;
+	int i = 0;
+
+	if ((data->currfid & INVALID_FID_MASK) || (vid & INVALID_VID_MASK)) {
+		printk(KERN_ERR PFX "internal error - overflow on vid write\n");
+		return 1;
+	}
+
+	lo = data->currfid;
+	lo |= (vid << MSR_C_LO_VID_SHIFT);
+	lo |= MSR_C_LO_INIT_FID_VID;
+
+	pr_debug("writing vid 0x%x, lo 0x%x, hi 0x%x\n",
+		vid, lo, STOP_GRANT_5NS);
+
+	do {
+		wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS);
+		if (i++ > 100) {
+			printk(KERN_ERR PFX "internal error - pending bit "
+					"very stuck - no further pstate "
+					"changes possible\n");
+			return 1;
+		}
+	} while (query_current_values_with_pending_wait(data));
+
+	if (savefid != data->currfid) {
+		printk(KERN_ERR PFX "fid changed on vid trans, old "
+			"0x%x new 0x%x\n",
+		       savefid, data->currfid);
+		return 1;
+	}
+
+	if (vid != data->currvid) {
+		printk(KERN_ERR PFX "vid trans failed, vid 0x%x, "
+				"curr 0x%x\n",
+				vid, data->currvid);
+		return 1;
+	}
+
+	return 0;
+}
+
+/*
+ * Reduce the vid by the max of step or reqvid.
+ * Decreasing vid codes represent increasing voltages:
+ * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of VID_OFF is off.
+ */
+static int decrease_vid_code_by_step(struct powernow_k8_data *data,
+		u32 reqvid, u32 step)
+{
+	if ((data->currvid - reqvid) > step)
+		reqvid = data->currvid - step;
+
+	if (write_new_vid(data, reqvid))
+		return 1;
+
+	count_off_vst(data);
+
+	return 0;
+}
+
+/* Change hardware pstate by single MSR write */
+static int transition_pstate(struct powernow_k8_data *data, u32 pstate)
+{
+	wrmsr(MSR_PSTATE_CTRL, pstate, 0);
+	data->currpstate = pstate;
+	return 0;
+}
+
+/* Change Opteron/Athlon64 fid and vid, by the 3 phases. */
+static int transition_fid_vid(struct powernow_k8_data *data,
+		u32 reqfid, u32 reqvid)
+{
+	if (core_voltage_pre_transition(data, reqvid, reqfid))
+		return 1;
+
+	if (core_frequency_transition(data, reqfid))
+		return 1;
+
+	if (core_voltage_post_transition(data, reqvid))
+		return 1;
+
+	if (query_current_values_with_pending_wait(data))
+		return 1;
+
+	if ((reqfid != data->currfid) || (reqvid != data->currvid)) {
+		printk(KERN_ERR PFX "failed (cpu%d): req 0x%x 0x%x, "
+				"curr 0x%x 0x%x\n",
+				smp_processor_id(),
+				reqfid, reqvid, data->currfid, data->currvid);
+		return 1;
+	}
+
+	pr_debug("transitioned (cpu%d): new fid 0x%x, vid 0x%x\n",
+		smp_processor_id(), data->currfid, data->currvid);
+
+	return 0;
+}
+
+/* Phase 1 - core voltage transition ... setup voltage */
+static int core_voltage_pre_transition(struct powernow_k8_data *data,
+		u32 reqvid, u32 reqfid)
+{
+	u32 rvosteps = data->rvo;
+	u32 savefid = data->currfid;
+	u32 maxvid, lo, rvomult = 1;
+
+	pr_debug("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, "
+		"reqvid 0x%x, rvo 0x%x\n",
+		smp_processor_id(),
+		data->currfid, data->currvid, reqvid, data->rvo);
+
+	if ((savefid < LO_FID_TABLE_TOP) && (reqfid < LO_FID_TABLE_TOP))
+		rvomult = 2;
+	rvosteps *= rvomult;
+	rdmsr(MSR_FIDVID_STATUS, lo, maxvid);
+	maxvid = 0x1f & (maxvid >> 16);
+	pr_debug("ph1 maxvid=0x%x\n", maxvid);
+	if (reqvid < maxvid) /* lower numbers are higher voltages */
+		reqvid = maxvid;
+
+	while (data->currvid > reqvid) {
+		pr_debug("ph1: curr 0x%x, req vid 0x%x\n",
+			data->currvid, reqvid);
+		if (decrease_vid_code_by_step(data, reqvid, data->vidmvs))
+			return 1;
+	}
+
+	while ((rvosteps > 0) &&
+			((rvomult * data->rvo + data->currvid) > reqvid)) {
+		if (data->currvid == maxvid) {
+			rvosteps = 0;
+		} else {
+			pr_debug("ph1: changing vid for rvo, req 0x%x\n",
+				data->currvid - 1);
+			if (decrease_vid_code_by_step(data, data->currvid-1, 1))
+				return 1;
+			rvosteps--;
+		}
+	}
+
+	if (query_current_values_with_pending_wait(data))
+		return 1;
+
+	if (savefid != data->currfid) {
+		printk(KERN_ERR PFX "ph1 err, currfid changed 0x%x\n",
+				data->currfid);
+		return 1;
+	}
+
+	pr_debug("ph1 complete, currfid 0x%x, currvid 0x%x\n",
+		data->currfid, data->currvid);
+
+	return 0;
+}
+
+/* Phase 2 - core frequency transition */
+static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
+{
+	u32 vcoreqfid, vcocurrfid, vcofiddiff;
+	u32 fid_interval, savevid = data->currvid;
+
+	if (data->currfid == reqfid) {
+		printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n",
+				data->currfid);
+		return 0;
+	}
+
+	pr_debug("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, "
+		"reqfid 0x%x\n",
+		smp_processor_id(),
+		data->currfid, data->currvid, reqfid);
+
+	vcoreqfid = convert_fid_to_vco_fid(reqfid);
+	vcocurrfid = convert_fid_to_vco_fid(data->currfid);
+	vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid
+	    : vcoreqfid - vcocurrfid;
+
+	if ((reqfid <= LO_FID_TABLE_TOP) && (data->currfid <= LO_FID_TABLE_TOP))
+		vcofiddiff = 0;
+
+	while (vcofiddiff > 2) {
+		(data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2);
+
+		if (reqfid > data->currfid) {
+			if (data->currfid > LO_FID_TABLE_TOP) {
+				if (write_new_fid(data,
+						data->currfid + fid_interval))
+					return 1;
+			} else {
+				if (write_new_fid
+				    (data,
+				     2 + convert_fid_to_vco_fid(data->currfid)))
+					return 1;
+			}
+		} else {
+			if (write_new_fid(data, data->currfid - fid_interval))
+				return 1;
+		}
+
+		vcocurrfid = convert_fid_to_vco_fid(data->currfid);
+		vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid
+		    : vcoreqfid - vcocurrfid;
+	}
+
+	if (write_new_fid(data, reqfid))
+		return 1;
+
+	if (query_current_values_with_pending_wait(data))
+		return 1;
+
+	if (data->currfid != reqfid) {
+		printk(KERN_ERR PFX
+			"ph2: mismatch, failed fid transition, "
+			"curr 0x%x, req 0x%x\n",
+			data->currfid, reqfid);
+		return 1;
+	}
+
+	if (savevid != data->currvid) {
+		printk(KERN_ERR PFX "ph2: vid changed, save 0x%x, curr 0x%x\n",
+			savevid, data->currvid);
+		return 1;
+	}
+
+	pr_debug("ph2 complete, currfid 0x%x, currvid 0x%x\n",
+		data->currfid, data->currvid);
+
+	return 0;
+}
+
+/* Phase 3 - core voltage transition flow ... jump to the final vid. */
+static int core_voltage_post_transition(struct powernow_k8_data *data,
+		u32 reqvid)
+{
+	u32 savefid = data->currfid;
+	u32 savereqvid = reqvid;
+
+	pr_debug("ph3 (cpu%d): starting, currfid 0x%x, currvid 0x%x\n",
+		smp_processor_id(),
+		data->currfid, data->currvid);
+
+	if (reqvid != data->currvid) {
+		if (write_new_vid(data, reqvid))
+			return 1;
+
+		if (savefid != data->currfid) {
+			printk(KERN_ERR PFX
+			       "ph3: bad fid change, save 0x%x, curr 0x%x\n",
+			       savefid, data->currfid);
+			return 1;
+		}
+
+		if (data->currvid != reqvid) {
+			printk(KERN_ERR PFX
+			       "ph3: failed vid transition\n, "
+			       "req 0x%x, curr 0x%x",
+			       reqvid, data->currvid);
+			return 1;
+		}
+	}
+
+	if (query_current_values_with_pending_wait(data))
+		return 1;
+
+	if (savereqvid != data->currvid) {
+		pr_debug("ph3 failed, currvid 0x%x\n", data->currvid);
+		return 1;
+	}
+
+	if (savefid != data->currfid) {
+		pr_debug("ph3 failed, currfid changed 0x%x\n",
+			data->currfid);
+		return 1;
+	}
+
+	pr_debug("ph3 complete, currfid 0x%x, currvid 0x%x\n",
+		data->currfid, data->currvid);
+
+	return 0;
+}
+
+static void check_supported_cpu(void *_rc)
+{
+	u32 eax, ebx, ecx, edx;
+	int *rc = _rc;
+
+	*rc = -ENODEV;
+
+	if (__this_cpu_read(cpu_info.x86_vendor) != X86_VENDOR_AMD)
+		return;
+
+	eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
+	if (((eax & CPUID_XFAM) != CPUID_XFAM_K8) &&
+	    ((eax & CPUID_XFAM) < CPUID_XFAM_10H))
+		return;
+
+	if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) {
+		if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
+		    ((eax & CPUID_XMOD) > CPUID_XMOD_REV_MASK)) {
+			printk(KERN_INFO PFX
+				"Processor cpuid %x not supported\n", eax);
+			return;
+		}
+
+		eax = cpuid_eax(CPUID_GET_MAX_CAPABILITIES);
+		if (eax < CPUID_FREQ_VOLT_CAPABILITIES) {
+			printk(KERN_INFO PFX
+			       "No frequency change capabilities detected\n");
+			return;
+		}
+
+		cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx);
+		if ((edx & P_STATE_TRANSITION_CAPABLE)
+			!= P_STATE_TRANSITION_CAPABLE) {
+			printk(KERN_INFO PFX
+				"Power state transitions not supported\n");
+			return;
+		}
+	} else { /* must be a HW Pstate capable processor */
+		cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx);
+		if ((edx & USE_HW_PSTATE) == USE_HW_PSTATE)
+			cpu_family = CPU_HW_PSTATE;
+		else
+			return;
+	}
+
+	*rc = 0;
+}
+
+static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst,
+		u8 maxvid)
+{
+	unsigned int j;
+	u8 lastfid = 0xff;
+
+	for (j = 0; j < data->numps; j++) {
+		if (pst[j].vid > LEAST_VID) {
+			printk(KERN_ERR FW_BUG PFX "vid %d invalid : 0x%x\n",
+			       j, pst[j].vid);
+			return -EINVAL;
+		}
+		if (pst[j].vid < data->rvo) {
+			/* vid + rvo >= 0 */
+			printk(KERN_ERR FW_BUG PFX "0 vid exceeded with pstate"
+			       " %d\n", j);
+			return -ENODEV;
+		}
+		if (pst[j].vid < maxvid + data->rvo) {
+			/* vid + rvo >= maxvid */
+			printk(KERN_ERR FW_BUG PFX "maxvid exceeded with pstate"
+			       " %d\n", j);
+			return -ENODEV;
+		}
+		if (pst[j].fid > MAX_FID) {
+			printk(KERN_ERR FW_BUG PFX "maxfid exceeded with pstate"
+			       " %d\n", j);
+			return -ENODEV;
+		}
+		if (j && (pst[j].fid < HI_FID_TABLE_BOTTOM)) {
+			/* Only first fid is allowed to be in "low" range */
+			printk(KERN_ERR FW_BUG PFX "two low fids - %d : "
+			       "0x%x\n", j, pst[j].fid);
+			return -EINVAL;
+		}
+		if (pst[j].fid < lastfid)
+			lastfid = pst[j].fid;
+	}
+	if (lastfid & 1) {
+		printk(KERN_ERR FW_BUG PFX "lastfid invalid\n");
+		return -EINVAL;
+	}
+	if (lastfid > LO_FID_TABLE_TOP)
+		printk(KERN_INFO FW_BUG PFX
+			"first fid not from lo freq table\n");
+
+	return 0;
+}
+
+static void invalidate_entry(struct cpufreq_frequency_table *powernow_table,
+		unsigned int entry)
+{
+	powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
+}
+
+static void print_basics(struct powernow_k8_data *data)
+{
+	int j;
+	for (j = 0; j < data->numps; j++) {
+		if (data->powernow_table[j].frequency !=
+				CPUFREQ_ENTRY_INVALID) {
+			if (cpu_family == CPU_HW_PSTATE) {
+				printk(KERN_INFO PFX
+					"   %d : pstate %d (%d MHz)\n", j,
+					data->powernow_table[j].index,
+					data->powernow_table[j].frequency/1000);
+			} else {
+				printk(KERN_INFO PFX
+					"fid 0x%x (%d MHz), vid 0x%x\n",
+					data->powernow_table[j].index & 0xff,
+					data->powernow_table[j].frequency/1000,
+					data->powernow_table[j].index >> 8);
+			}
+		}
+	}
+	if (data->batps)
+		printk(KERN_INFO PFX "Only %d pstates on battery\n",
+				data->batps);
+}
+
+static u32 freq_from_fid_did(u32 fid, u32 did)
+{
+	u32 mhz = 0;
+
+	if (boot_cpu_data.x86 == 0x10)
+		mhz = (100 * (fid + 0x10)) >> did;
+	else if (boot_cpu_data.x86 == 0x11)
+		mhz = (100 * (fid + 8)) >> did;
+	else
+		BUG();
+
+	return mhz * 1000;
+}
+
+static int fill_powernow_table(struct powernow_k8_data *data,
+		struct pst_s *pst, u8 maxvid)
+{
+	struct cpufreq_frequency_table *powernow_table;
+	unsigned int j;
+
+	if (data->batps) {
+		/* use ACPI support to get full speed on mains power */
+		printk(KERN_WARNING PFX
+			"Only %d pstates usable (use ACPI driver for full "
+			"range\n", data->batps);
+		data->numps = data->batps;
+	}
+
+	for (j = 1; j < data->numps; j++) {
+		if (pst[j-1].fid >= pst[j].fid) {
+			printk(KERN_ERR PFX "PST out of sequence\n");
+			return -EINVAL;
+		}
+	}
+
+	if (data->numps < 2) {
+		printk(KERN_ERR PFX "no p states to transition\n");
+		return -ENODEV;
+	}
+
+	if (check_pst_table(data, pst, maxvid))
+		return -EINVAL;
+
+	powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table)
+		* (data->numps + 1)), GFP_KERNEL);
+	if (!powernow_table) {
+		printk(KERN_ERR PFX "powernow_table memory alloc failure\n");
+		return -ENOMEM;
+	}
+
+	for (j = 0; j < data->numps; j++) {
+		int freq;
+		powernow_table[j].index = pst[j].fid; /* lower 8 bits */
+		powernow_table[j].index |= (pst[j].vid << 8); /* upper 8 bits */
+		freq = find_khz_freq_from_fid(pst[j].fid);
+		powernow_table[j].frequency = freq;
+	}
+	powernow_table[data->numps].frequency = CPUFREQ_TABLE_END;
+	powernow_table[data->numps].index = 0;
+
+	if (query_current_values_with_pending_wait(data)) {
+		kfree(powernow_table);
+		return -EIO;
+	}
+
+	pr_debug("cfid 0x%x, cvid 0x%x\n", data->currfid, data->currvid);
+	data->powernow_table = powernow_table;
+	if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu)
+		print_basics(data);
+
+	for (j = 0; j < data->numps; j++)
+		if ((pst[j].fid == data->currfid) &&
+		    (pst[j].vid == data->currvid))
+			return 0;
+
+	pr_debug("currfid/vid do not match PST, ignoring\n");
+	return 0;
+}
+
+/* Find and validate the PSB/PST table in BIOS. */
+static int find_psb_table(struct powernow_k8_data *data)
+{
+	struct psb_s *psb;
+	unsigned int i;
+	u32 mvs;
+	u8 maxvid;
+	u32 cpst = 0;
+	u32 thiscpuid;
+
+	for (i = 0xc0000; i < 0xffff0; i += 0x10) {
+		/* Scan BIOS looking for the signature. */
+		/* It can not be at ffff0 - it is too big. */
+
+		psb = phys_to_virt(i);
+		if (memcmp(psb, PSB_ID_STRING, PSB_ID_STRING_LEN) != 0)
+			continue;
+
+		pr_debug("found PSB header at 0x%p\n", psb);
+
+		pr_debug("table vers: 0x%x\n", psb->tableversion);
+		if (psb->tableversion != PSB_VERSION_1_4) {
+			printk(KERN_ERR FW_BUG PFX "PSB table is not v1.4\n");
+			return -ENODEV;
+		}
+
+		pr_debug("flags: 0x%x\n", psb->flags1);
+		if (psb->flags1) {
+			printk(KERN_ERR FW_BUG PFX "unknown flags\n");
+			return -ENODEV;
+		}
+
+		data->vstable = psb->vstable;
+		pr_debug("voltage stabilization time: %d(*20us)\n",
+				data->vstable);
+
+		pr_debug("flags2: 0x%x\n", psb->flags2);
+		data->rvo = psb->flags2 & 3;
+		data->irt = ((psb->flags2) >> 2) & 3;
+		mvs = ((psb->flags2) >> 4) & 3;
+		data->vidmvs = 1 << mvs;
+		data->batps = ((psb->flags2) >> 6) & 3;
+
+		pr_debug("ramp voltage offset: %d\n", data->rvo);
+		pr_debug("isochronous relief time: %d\n", data->irt);
+		pr_debug("maximum voltage step: %d - 0x%x\n", mvs, data->vidmvs);
+
+		pr_debug("numpst: 0x%x\n", psb->num_tables);
+		cpst = psb->num_tables;
+		if ((psb->cpuid == 0x00000fc0) ||
+		    (psb->cpuid == 0x00000fe0)) {
+			thiscpuid = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
+			if ((thiscpuid == 0x00000fc0) ||
+			    (thiscpuid == 0x00000fe0))
+				cpst = 1;
+		}
+		if (cpst != 1) {
+			printk(KERN_ERR FW_BUG PFX "numpst must be 1\n");
+			return -ENODEV;
+		}
+
+		data->plllock = psb->plllocktime;
+		pr_debug("plllocktime: 0x%x (units 1us)\n", psb->plllocktime);
+		pr_debug("maxfid: 0x%x\n", psb->maxfid);
+		pr_debug("maxvid: 0x%x\n", psb->maxvid);
+		maxvid = psb->maxvid;
+
+		data->numps = psb->numps;
+		pr_debug("numpstates: 0x%x\n", data->numps);
+		return fill_powernow_table(data,
+				(struct pst_s *)(psb+1), maxvid);
+	}
+	/*
+	 * If you see this message, complain to BIOS manufacturer. If
+	 * he tells you "we do not support Linux" or some similar
+	 * nonsense, remember that Windows 2000 uses the same legacy
+	 * mechanism that the old Linux PSB driver uses. Tell them it
+	 * is broken with Windows 2000.
+	 *
+	 * The reference to the AMD documentation is chapter 9 in the
+	 * BIOS and Kernel Developer's Guide, which is available on
+	 * www.amd.com
+	 */
+	printk(KERN_ERR FW_BUG PFX "No PSB or ACPI _PSS objects\n");
+	printk(KERN_ERR PFX "Make sure that your BIOS is up to date"
+		" and Cool'N'Quiet support is enabled in BIOS setup\n");
+	return -ENODEV;
+}
+
+static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data,
+		unsigned int index)
+{
+	u64 control;
+
+	if (!data->acpi_data.state_count || (cpu_family == CPU_HW_PSTATE))
+		return;
+
+	control = data->acpi_data.states[index].control;
+	data->irt = (control >> IRT_SHIFT) & IRT_MASK;
+	data->rvo = (control >> RVO_SHIFT) & RVO_MASK;
+	data->exttype = (control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK;
+	data->plllock = (control >> PLL_L_SHIFT) & PLL_L_MASK;
+	data->vidmvs = 1 << ((control >> MVS_SHIFT) & MVS_MASK);
+	data->vstable = (control >> VST_SHIFT) & VST_MASK;
+}
+
+static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
+{
+	struct cpufreq_frequency_table *powernow_table;
+	int ret_val = -ENODEV;
+	u64 control, status;
+
+	if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
+		pr_debug("register performance failed: bad ACPI data\n");
+		return -EIO;
+	}
+
+	/* verify the data contained in the ACPI structures */
+	if (data->acpi_data.state_count <= 1) {
+		pr_debug("No ACPI P-States\n");
+		goto err_out;
+	}
+
+	control = data->acpi_data.control_register.space_id;
+	status = data->acpi_data.status_register.space_id;
+
+	if ((control != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
+	    (status != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
+		pr_debug("Invalid control/status registers (%llx - %llx)\n",
+			control, status);
+		goto err_out;
+	}
+
+	/* fill in data->powernow_table */
+	powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table)
+		* (data->acpi_data.state_count + 1)), GFP_KERNEL);
+	if (!powernow_table) {
+		pr_debug("powernow_table memory alloc failure\n");
+		goto err_out;
+	}
+
+	/* fill in data */
+	data->numps = data->acpi_data.state_count;
+	powernow_k8_acpi_pst_values(data, 0);
+
+	if (cpu_family == CPU_HW_PSTATE)
+		ret_val = fill_powernow_table_pstate(data, powernow_table);
+	else
+		ret_val = fill_powernow_table_fidvid(data, powernow_table);
+	if (ret_val)
+		goto err_out_mem;
+
+	powernow_table[data->acpi_data.state_count].frequency =
+		CPUFREQ_TABLE_END;
+	powernow_table[data->acpi_data.state_count].index = 0;
+	data->powernow_table = powernow_table;
+
+	if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu)
+		print_basics(data);
+
+	/* notify BIOS that we exist */
+	acpi_processor_notify_smm(THIS_MODULE);
+
+	if (!zalloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) {
+		printk(KERN_ERR PFX
+				"unable to alloc powernow_k8_data cpumask\n");
+		ret_val = -ENOMEM;
+		goto err_out_mem;
+	}
+
+	return 0;
+
+err_out_mem:
+	kfree(powernow_table);
+
+err_out:
+	acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
+
+	/* data->acpi_data.state_count informs us at ->exit()
+	 * whether ACPI was used */
+	data->acpi_data.state_count = 0;
+
+	return ret_val;
+}
+
+static int fill_powernow_table_pstate(struct powernow_k8_data *data,
+		struct cpufreq_frequency_table *powernow_table)
+{
+	int i;
+	u32 hi = 0, lo = 0;
+	rdmsr(MSR_PSTATE_CUR_LIMIT, lo, hi);
+	data->max_hw_pstate = (lo & HW_PSTATE_MAX_MASK) >> HW_PSTATE_MAX_SHIFT;
+
+	for (i = 0; i < data->acpi_data.state_count; i++) {
+		u32 index;
+
+		index = data->acpi_data.states[i].control & HW_PSTATE_MASK;
+		if (index > data->max_hw_pstate) {
+			printk(KERN_ERR PFX "invalid pstate %d - "
+					"bad value %d.\n", i, index);
+			printk(KERN_ERR PFX "Please report to BIOS "
+					"manufacturer\n");
+			invalidate_entry(powernow_table, i);
+			continue;
+		}
+		rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi);
+		if (!(hi & HW_PSTATE_VALID_MASK)) {
+			pr_debug("invalid pstate %d, ignoring\n", index);
+			invalidate_entry(powernow_table, i);
+			continue;
+		}
+
+		powernow_table[i].index = index;
+
+		/* Frequency may be rounded for these */
+		if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10)
+				 || boot_cpu_data.x86 == 0x11) {
+			powernow_table[i].frequency =
+				freq_from_fid_did(lo & 0x3f, (lo >> 6) & 7);
+		} else
+			powernow_table[i].frequency =
+				data->acpi_data.states[i].core_frequency * 1000;
+	}
+	return 0;
+}
+
+static int fill_powernow_table_fidvid(struct powernow_k8_data *data,
+		struct cpufreq_frequency_table *powernow_table)
+{
+	int i;
+
+	for (i = 0; i < data->acpi_data.state_count; i++) {
+		u32 fid;
+		u32 vid;
+		u32 freq, index;
+		u64 status, control;
+
+		if (data->exttype) {
+			status =  data->acpi_data.states[i].status;
+			fid = status & EXT_FID_MASK;
+			vid = (status >> VID_SHIFT) & EXT_VID_MASK;
+		} else {
+			control =  data->acpi_data.states[i].control;
+			fid = control & FID_MASK;
+			vid = (control >> VID_SHIFT) & VID_MASK;
+		}
+
+		pr_debug("   %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
+
+		index = fid | (vid<<8);
+		powernow_table[i].index = index;
+
+		freq = find_khz_freq_from_fid(fid);
+		powernow_table[i].frequency = freq;
+
+		/* verify frequency is OK */
+		if ((freq > (MAX_FREQ * 1000)) || (freq < (MIN_FREQ * 1000))) {
+			pr_debug("invalid freq %u kHz, ignoring\n", freq);
+			invalidate_entry(powernow_table, i);
+			continue;
+		}
+
+		/* verify voltage is OK -
+		 * BIOSs are using "off" to indicate invalid */
+		if (vid == VID_OFF) {
+			pr_debug("invalid vid %u, ignoring\n", vid);
+			invalidate_entry(powernow_table, i);
+			continue;
+		}
+
+		if (freq != (data->acpi_data.states[i].core_frequency * 1000)) {
+			printk(KERN_INFO PFX "invalid freq entries "
+				"%u kHz vs. %u kHz\n", freq,
+				(unsigned int)
+				(data->acpi_data.states[i].core_frequency
+				 * 1000));
+			invalidate_entry(powernow_table, i);
+			continue;
+		}
+	}
+	return 0;
+}
+
+static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data)
+{
+	if (data->acpi_data.state_count)
+		acpi_processor_unregister_performance(&data->acpi_data,
+				data->cpu);
+	free_cpumask_var(data->acpi_data.shared_cpu_map);
+}
+
+static int get_transition_latency(struct powernow_k8_data *data)
+{
+	int max_latency = 0;
+	int i;
+	for (i = 0; i < data->acpi_data.state_count; i++) {
+		int cur_latency = data->acpi_data.states[i].transition_latency
+			+ data->acpi_data.states[i].bus_master_latency;
+		if (cur_latency > max_latency)
+			max_latency = cur_latency;
+	}
+	if (max_latency == 0) {
+		/*
+		 * Fam 11h and later may return 0 as transition latency. This
+		 * is intended and means "very fast". While cpufreq core and
+		 * governors currently can handle that gracefully, better set it
+		 * to 1 to avoid problems in the future.
+		 */
+		if (boot_cpu_data.x86 < 0x11)
+			printk(KERN_ERR FW_WARN PFX "Invalid zero transition "
+				"latency\n");
+		max_latency = 1;
+	}
+	/* value in usecs, needs to be in nanoseconds */
+	return 1000 * max_latency;
+}
+
+/* Take a frequency, and issue the fid/vid transition command */
+static int transition_frequency_fidvid(struct powernow_k8_data *data,
+		unsigned int index)
+{
+	u32 fid = 0;
+	u32 vid = 0;
+	int res, i;
+	struct cpufreq_freqs freqs;
+
+	pr_debug("cpu %d transition to index %u\n", smp_processor_id(), index);
+
+	/* fid/vid correctness check for k8 */
+	/* fid are the lower 8 bits of the index we stored into
+	 * the cpufreq frequency table in find_psb_table, vid
+	 * are the upper 8 bits.
+	 */
+	fid = data->powernow_table[index].index & 0xFF;
+	vid = (data->powernow_table[index].index & 0xFF00) >> 8;
+
+	pr_debug("table matched fid 0x%x, giving vid 0x%x\n", fid, vid);
+
+	if (query_current_values_with_pending_wait(data))
+		return 1;
+
+	if ((data->currvid == vid) && (data->currfid == fid)) {
+		pr_debug("target matches current values (fid 0x%x, vid 0x%x)\n",
+			fid, vid);
+		return 0;
+	}
+
+	pr_debug("cpu %d, changing to fid 0x%x, vid 0x%x\n",
+		smp_processor_id(), fid, vid);
+	freqs.old = find_khz_freq_from_fid(data->currfid);
+	freqs.new = find_khz_freq_from_fid(fid);
+
+	for_each_cpu(i, data->available_cores) {
+		freqs.cpu = i;
+		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	}
+
+	res = transition_fid_vid(data, fid, vid);
+	freqs.new = find_khz_freq_from_fid(data->currfid);
+
+	for_each_cpu(i, data->available_cores) {
+		freqs.cpu = i;
+		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	}
+	return res;
+}
+
+/* Take a frequency, and issue the hardware pstate transition command */
+static int transition_frequency_pstate(struct powernow_k8_data *data,
+		unsigned int index)
+{
+	u32 pstate = 0;
+	int res, i;
+	struct cpufreq_freqs freqs;
+
+	pr_debug("cpu %d transition to index %u\n", smp_processor_id(), index);
+
+	/* get MSR index for hardware pstate transition */
+	pstate = index & HW_PSTATE_MASK;
+	if (pstate > data->max_hw_pstate)
+		return 0;
+	freqs.old = find_khz_freq_from_pstate(data->powernow_table,
+			data->currpstate);
+	freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
+
+	for_each_cpu(i, data->available_cores) {
+		freqs.cpu = i;
+		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	}
+
+	res = transition_pstate(data, pstate);
+	freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
+
+	for_each_cpu(i, data->available_cores) {
+		freqs.cpu = i;
+		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	}
+	return res;
+}
+
+/* Driver entry point to switch to the target frequency */
+static int powernowk8_target(struct cpufreq_policy *pol,
+		unsigned targfreq, unsigned relation)
+{
+	cpumask_var_t oldmask;
+	struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
+	u32 checkfid;
+	u32 checkvid;
+	unsigned int newstate;
+	int ret = -EIO;
+
+	if (!data)
+		return -EINVAL;
+
+	checkfid = data->currfid;
+	checkvid = data->currvid;
+
+	/* only run on specific CPU from here on. */
+	/* This is poor form: use a workqueue or smp_call_function_single */
+	if (!alloc_cpumask_var(&oldmask, GFP_KERNEL))
+		return -ENOMEM;
+
+	cpumask_copy(oldmask, tsk_cpus_allowed(current));
+	set_cpus_allowed_ptr(current, cpumask_of(pol->cpu));
+
+	if (smp_processor_id() != pol->cpu) {
+		printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
+		goto err_out;
+	}
+
+	if (pending_bit_stuck()) {
+		printk(KERN_ERR PFX "failing targ, change pending bit set\n");
+		goto err_out;
+	}
+
+	pr_debug("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n",
+		pol->cpu, targfreq, pol->min, pol->max, relation);
+
+	if (query_current_values_with_pending_wait(data))
+		goto err_out;
+
+	if (cpu_family != CPU_HW_PSTATE) {
+		pr_debug("targ: curr fid 0x%x, vid 0x%x\n",
+		data->currfid, data->currvid);
+
+		if ((checkvid != data->currvid) ||
+		    (checkfid != data->currfid)) {
+			printk(KERN_INFO PFX
+				"error - out of sync, fix 0x%x 0x%x, "
+				"vid 0x%x 0x%x\n",
+				checkfid, data->currfid,
+				checkvid, data->currvid);
+		}
+	}
+
+	if (cpufreq_frequency_table_target(pol, data->powernow_table,
+				targfreq, relation, &newstate))
+		goto err_out;
+
+	mutex_lock(&fidvid_mutex);
+
+	powernow_k8_acpi_pst_values(data, newstate);
+
+	if (cpu_family == CPU_HW_PSTATE)
+		ret = transition_frequency_pstate(data, newstate);
+	else
+		ret = transition_frequency_fidvid(data, newstate);
+	if (ret) {
+		printk(KERN_ERR PFX "transition frequency failed\n");
+		ret = 1;
+		mutex_unlock(&fidvid_mutex);
+		goto err_out;
+	}
+	mutex_unlock(&fidvid_mutex);
+
+	if (cpu_family == CPU_HW_PSTATE)
+		pol->cur = find_khz_freq_from_pstate(data->powernow_table,
+				newstate);
+	else
+		pol->cur = find_khz_freq_from_fid(data->currfid);
+	ret = 0;
+
+err_out:
+	set_cpus_allowed_ptr(current, oldmask);
+	free_cpumask_var(oldmask);
+	return ret;
+}
+
+/* Driver entry point to verify the policy and range of frequencies */
+static int powernowk8_verify(struct cpufreq_policy *pol)
+{
+	struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
+
+	if (!data)
+		return -EINVAL;
+
+	return cpufreq_frequency_table_verify(pol, data->powernow_table);
+}
+
+struct init_on_cpu {
+	struct powernow_k8_data *data;
+	int rc;
+};
+
+static void __cpuinit powernowk8_cpu_init_on_cpu(void *_init_on_cpu)
+{
+	struct init_on_cpu *init_on_cpu = _init_on_cpu;
+
+	if (pending_bit_stuck()) {
+		printk(KERN_ERR PFX "failing init, change pending bit set\n");
+		init_on_cpu->rc = -ENODEV;
+		return;
+	}
+
+	if (query_current_values_with_pending_wait(init_on_cpu->data)) {
+		init_on_cpu->rc = -ENODEV;
+		return;
+	}
+
+	if (cpu_family == CPU_OPTERON)
+		fidvid_msr_init();
+
+	init_on_cpu->rc = 0;
+}
+
+/* per CPU init entry point to the driver */
+static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
+{
+	static const char ACPI_PSS_BIOS_BUG_MSG[] =
+		KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n"
+		FW_BUG PFX "Try again with latest BIOS.\n";
+	struct powernow_k8_data *data;
+	struct init_on_cpu init_on_cpu;
+	int rc;
+	struct cpuinfo_x86 *c = &cpu_data(pol->cpu);
+
+	if (!cpu_online(pol->cpu))
+		return -ENODEV;
+
+	smp_call_function_single(pol->cpu, check_supported_cpu, &rc, 1);
+	if (rc)
+		return -ENODEV;
+
+	data = kzalloc(sizeof(struct powernow_k8_data), GFP_KERNEL);
+	if (!data) {
+		printk(KERN_ERR PFX "unable to alloc powernow_k8_data");
+		return -ENOMEM;
+	}
+
+	data->cpu = pol->cpu;
+	data->currpstate = HW_PSTATE_INVALID;
+
+	if (powernow_k8_cpu_init_acpi(data)) {
+		/*
+		 * Use the PSB BIOS structure. This is only available on
+		 * an UP version, and is deprecated by AMD.
+		 */
+		if (num_online_cpus() != 1) {
+			printk_once(ACPI_PSS_BIOS_BUG_MSG);
+			goto err_out;
+		}
+		if (pol->cpu != 0) {
+			printk(KERN_ERR FW_BUG PFX "No ACPI _PSS objects for "
+			       "CPU other than CPU0. Complain to your BIOS "
+			       "vendor.\n");
+			goto err_out;
+		}
+		rc = find_psb_table(data);
+		if (rc)
+			goto err_out;
+
+		/* Take a crude guess here.
+		 * That guess was in microseconds, so multiply with 1000 */
+		pol->cpuinfo.transition_latency = (
+			 ((data->rvo + 8) * data->vstable * VST_UNITS_20US) +
+			 ((1 << data->irt) * 30)) * 1000;
+	} else /* ACPI _PSS objects available */
+		pol->cpuinfo.transition_latency = get_transition_latency(data);
+
+	/* only run on specific CPU from here on */
+	init_on_cpu.data = data;
+	smp_call_function_single(data->cpu, powernowk8_cpu_init_on_cpu,
+				 &init_on_cpu, 1);
+	rc = init_on_cpu.rc;
+	if (rc != 0)
+		goto err_out_exit_acpi;
+
+	if (cpu_family == CPU_HW_PSTATE)
+		cpumask_copy(pol->cpus, cpumask_of(pol->cpu));
+	else
+		cpumask_copy(pol->cpus, cpu_core_mask(pol->cpu));
+	data->available_cores = pol->cpus;
+
+	if (cpu_family == CPU_HW_PSTATE)
+		pol->cur = find_khz_freq_from_pstate(data->powernow_table,
+				data->currpstate);
+	else
+		pol->cur = find_khz_freq_from_fid(data->currfid);
+	pr_debug("policy current frequency %d kHz\n", pol->cur);
+
+	/* min/max the cpu is capable of */
+	if (cpufreq_frequency_table_cpuinfo(pol, data->powernow_table)) {
+		printk(KERN_ERR FW_BUG PFX "invalid powernow_table\n");
+		powernow_k8_cpu_exit_acpi(data);
+		kfree(data->powernow_table);
+		kfree(data);
+		return -EINVAL;
+	}
+
+	/* Check for APERF/MPERF support in hardware */
+	if (cpu_has(c, X86_FEATURE_APERFMPERF))
+		cpufreq_amd64_driver.getavg = cpufreq_get_measured_perf;
+
+	cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu);
+
+	if (cpu_family == CPU_HW_PSTATE)
+		pr_debug("cpu_init done, current pstate 0x%x\n",
+				data->currpstate);
+	else
+		pr_debug("cpu_init done, current fid 0x%x, vid 0x%x\n",
+			data->currfid, data->currvid);
+
+	per_cpu(powernow_data, pol->cpu) = data;
+
+	return 0;
+
+err_out_exit_acpi:
+	powernow_k8_cpu_exit_acpi(data);
+
+err_out:
+	kfree(data);
+	return -ENODEV;
+}
+
+static int __devexit powernowk8_cpu_exit(struct cpufreq_policy *pol)
+{
+	struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
+
+	if (!data)
+		return -EINVAL;
+
+	powernow_k8_cpu_exit_acpi(data);
+
+	cpufreq_frequency_table_put_attr(pol->cpu);
+
+	kfree(data->powernow_table);
+	kfree(data);
+	per_cpu(powernow_data, pol->cpu) = NULL;
+
+	return 0;
+}
+
+static void query_values_on_cpu(void *_err)
+{
+	int *err = _err;
+	struct powernow_k8_data *data = __this_cpu_read(powernow_data);
+
+	*err = query_current_values_with_pending_wait(data);
+}
+
+static unsigned int powernowk8_get(unsigned int cpu)
+{
+	struct powernow_k8_data *data = per_cpu(powernow_data, cpu);
+	unsigned int khz = 0;
+	int err;
+
+	if (!data)
+		return 0;
+
+	smp_call_function_single(cpu, query_values_on_cpu, &err, true);
+	if (err)
+		goto out;
+
+	if (cpu_family == CPU_HW_PSTATE)
+		khz = find_khz_freq_from_pstate(data->powernow_table,
+						data->currpstate);
+	else
+		khz = find_khz_freq_from_fid(data->currfid);
+
+
+out:
+	return khz;
+}
+
+static void _cpb_toggle_msrs(bool t)
+{
+	int cpu;
+
+	get_online_cpus();
+
+	rdmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs);
+
+	for_each_cpu(cpu, cpu_online_mask) {
+		struct msr *reg = per_cpu_ptr(msrs, cpu);
+		if (t)
+			reg->l &= ~BIT(25);
+		else
+			reg->l |= BIT(25);
+	}
+	wrmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs);
+
+	put_online_cpus();
+}
+
+/*
+ * Switch on/off core performance boosting.
+ *
+ * 0=disable
+ * 1=enable.
+ */
+static void cpb_toggle(bool t)
+{
+	if (!cpb_capable)
+		return;
+
+	if (t && !cpb_enabled) {
+		cpb_enabled = true;
+		_cpb_toggle_msrs(t);
+		printk(KERN_INFO PFX "Core Boosting enabled.\n");
+	} else if (!t && cpb_enabled) {
+		cpb_enabled = false;
+		_cpb_toggle_msrs(t);
+		printk(KERN_INFO PFX "Core Boosting disabled.\n");
+	}
+}
+
+static ssize_t store_cpb(struct cpufreq_policy *policy, const char *buf,
+				 size_t count)
+{
+	int ret = -EINVAL;
+	unsigned long val = 0;
+
+	ret = strict_strtoul(buf, 10, &val);
+	if (!ret && (val == 0 || val == 1) && cpb_capable)
+		cpb_toggle(val);
+	else
+		return -EINVAL;
+
+	return count;
+}
+
+static ssize_t show_cpb(struct cpufreq_policy *policy, char *buf)
+{
+	return sprintf(buf, "%u\n", cpb_enabled);
+}
+
+#define define_one_rw(_name) \
+static struct freq_attr _name = \
+__ATTR(_name, 0644, show_##_name, store_##_name)
+
+define_one_rw(cpb);
+
+static struct freq_attr *powernow_k8_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	&cpb,
+	NULL,
+};
+
+static struct cpufreq_driver cpufreq_amd64_driver = {
+	.verify		= powernowk8_verify,
+	.target		= powernowk8_target,
+	.bios_limit	= acpi_processor_get_bios_limit,
+	.init		= powernowk8_cpu_init,
+	.exit		= __devexit_p(powernowk8_cpu_exit),
+	.get		= powernowk8_get,
+	.name		= "powernow-k8",
+	.owner		= THIS_MODULE,
+	.attr		= powernow_k8_attr,
+};
+
+/*
+ * Clear the boost-disable flag on the CPU_DOWN path so that this cpu
+ * cannot block the remaining ones from boosting. On the CPU_UP path we
+ * simply keep the boost-disable flag in sync with the current global
+ * state.
+ */
+static int cpb_notify(struct notifier_block *nb, unsigned long action,
+		      void *hcpu)
+{
+	unsigned cpu = (long)hcpu;
+	u32 lo, hi;
+
+	switch (action) {
+	case CPU_UP_PREPARE:
+	case CPU_UP_PREPARE_FROZEN:
+
+		if (!cpb_enabled) {
+			rdmsr_on_cpu(cpu, MSR_K7_HWCR, &lo, &hi);
+			lo |= BIT(25);
+			wrmsr_on_cpu(cpu, MSR_K7_HWCR, lo, hi);
+		}
+		break;
+
+	case CPU_DOWN_PREPARE:
+	case CPU_DOWN_PREPARE_FROZEN:
+		rdmsr_on_cpu(cpu, MSR_K7_HWCR, &lo, &hi);
+		lo &= ~BIT(25);
+		wrmsr_on_cpu(cpu, MSR_K7_HWCR, lo, hi);
+		break;
+
+	default:
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block cpb_nb = {
+	.notifier_call		= cpb_notify,
+};
+
+/* driver entry point for init */
+static int __cpuinit powernowk8_init(void)
+{
+	unsigned int i, supported_cpus = 0, cpu;
+	int rv;
+
+	for_each_online_cpu(i) {
+		int rc;
+		smp_call_function_single(i, check_supported_cpu, &rc, 1);
+		if (rc == 0)
+			supported_cpus++;
+	}
+
+	if (supported_cpus != num_online_cpus())
+		return -ENODEV;
+
+	printk(KERN_INFO PFX "Found %d %s (%d cpu cores) (" VERSION ")\n",
+		num_online_nodes(), boot_cpu_data.x86_model_id, supported_cpus);
+
+	if (boot_cpu_has(X86_FEATURE_CPB)) {
+
+		cpb_capable = true;
+
+		msrs = msrs_alloc();
+		if (!msrs) {
+			printk(KERN_ERR "%s: Error allocating msrs!\n", __func__);
+			return -ENOMEM;
+		}
+
+		register_cpu_notifier(&cpb_nb);
+
+		rdmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs);
+
+		for_each_cpu(cpu, cpu_online_mask) {
+			struct msr *reg = per_cpu_ptr(msrs, cpu);
+			cpb_enabled |= !(!!(reg->l & BIT(25)));
+		}
+
+		printk(KERN_INFO PFX "Core Performance Boosting: %s.\n",
+			(cpb_enabled ? "on" : "off"));
+	}
+
+	rv = cpufreq_register_driver(&cpufreq_amd64_driver);
+	if (rv < 0 && boot_cpu_has(X86_FEATURE_CPB)) {
+		unregister_cpu_notifier(&cpb_nb);
+		msrs_free(msrs);
+		msrs = NULL;
+	}
+	return rv;
+}
+
+/* driver entry point for term */
+static void __exit powernowk8_exit(void)
+{
+	pr_debug("exit\n");
+
+	if (boot_cpu_has(X86_FEATURE_CPB)) {
+		msrs_free(msrs);
+		msrs = NULL;
+
+		unregister_cpu_notifier(&cpb_nb);
+	}
+
+	cpufreq_unregister_driver(&cpufreq_amd64_driver);
+}
+
+MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and "
+		"Mark Langsdorf <mark.langsdorf@amd.com>");
+MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver.");
+MODULE_LICENSE("GPL");
+
+late_initcall(powernowk8_init);
+module_exit(powernowk8_exit);
diff --git a/drivers/cpufreq/powernow-k8.h b/drivers/cpufreq/powernow-k8.h
new file mode 100644
index 00000000000..3744d26cdc2
--- /dev/null
+++ b/drivers/cpufreq/powernow-k8.h
@@ -0,0 +1,222 @@
+/*
+ *  (c) 2003-2006 Advanced Micro Devices, Inc.
+ *  Your use of this code is subject to the terms and conditions of the
+ *  GNU general public license version 2. See "COPYING" or
+ *  http://www.gnu.org/licenses/gpl.html
+ */
+
+enum pstate {
+	HW_PSTATE_INVALID = 0xff,
+	HW_PSTATE_0 = 0,
+	HW_PSTATE_1 = 1,
+	HW_PSTATE_2 = 2,
+	HW_PSTATE_3 = 3,
+	HW_PSTATE_4 = 4,
+	HW_PSTATE_5 = 5,
+	HW_PSTATE_6 = 6,
+	HW_PSTATE_7 = 7,
+};
+
+struct powernow_k8_data {
+	unsigned int cpu;
+
+	u32 numps;  /* number of p-states */
+	u32 batps;  /* number of p-states supported on battery */
+	u32 max_hw_pstate; /* maximum legal hardware pstate */
+
+	/* these values are constant when the PSB is used to determine
+	 * vid/fid pairings, but are modified during the ->target() call
+	 * when ACPI is used */
+	u32 rvo;     /* ramp voltage offset */
+	u32 irt;     /* isochronous relief time */
+	u32 vidmvs;  /* usable value calculated from mvs */
+	u32 vstable; /* voltage stabilization time, units 20 us */
+	u32 plllock; /* pll lock time, units 1 us */
+        u32 exttype; /* extended interface = 1 */
+
+	/* keep track of the current fid / vid or pstate */
+	u32 currvid;
+	u32 currfid;
+	enum pstate currpstate;
+
+	/* the powernow_table includes all frequency and vid/fid pairings:
+	 * fid are the lower 8 bits of the index, vid are the upper 8 bits.
+	 * frequency is in kHz */
+	struct cpufreq_frequency_table  *powernow_table;
+
+	/* the acpi table needs to be kept. it's only available if ACPI was
+	 * used to determine valid frequency/vid/fid states */
+	struct acpi_processor_performance acpi_data;
+
+	/* we need to keep track of associated cores, but let cpufreq
+	 * handle hotplug events - so just point at cpufreq pol->cpus
+	 * structure */
+	struct cpumask *available_cores;
+};
+
+/* processor's cpuid instruction support */
+#define CPUID_PROCESSOR_SIGNATURE	1	/* function 1 */
+#define CPUID_XFAM			0x0ff00000	/* extended family */
+#define CPUID_XFAM_K8			0
+#define CPUID_XMOD			0x000f0000	/* extended model */
+#define CPUID_XMOD_REV_MASK		0x000c0000
+#define CPUID_XFAM_10H			0x00100000	/* family 0x10 */
+#define CPUID_USE_XFAM_XMOD		0x00000f00
+#define CPUID_GET_MAX_CAPABILITIES	0x80000000
+#define CPUID_FREQ_VOLT_CAPABILITIES	0x80000007
+#define P_STATE_TRANSITION_CAPABLE	6
+
+/* Model Specific Registers for p-state transitions. MSRs are 64-bit. For     */
+/* writes (wrmsr - opcode 0f 30), the register number is placed in ecx, and   */
+/* the value to write is placed in edx:eax. For reads (rdmsr - opcode 0f 32), */
+/* the register number is placed in ecx, and the data is returned in edx:eax. */
+
+#define MSR_FIDVID_CTL      0xc0010041
+#define MSR_FIDVID_STATUS   0xc0010042
+
+/* Field definitions within the FID VID Low Control MSR : */
+#define MSR_C_LO_INIT_FID_VID     0x00010000
+#define MSR_C_LO_NEW_VID          0x00003f00
+#define MSR_C_LO_NEW_FID          0x0000003f
+#define MSR_C_LO_VID_SHIFT        8
+
+/* Field definitions within the FID VID High Control MSR : */
+#define MSR_C_HI_STP_GNT_TO	  0x000fffff
+
+/* Field definitions within the FID VID Low Status MSR : */
+#define MSR_S_LO_CHANGE_PENDING   0x80000000   /* cleared when completed */
+#define MSR_S_LO_MAX_RAMP_VID     0x3f000000
+#define MSR_S_LO_MAX_FID          0x003f0000
+#define MSR_S_LO_START_FID        0x00003f00
+#define MSR_S_LO_CURRENT_FID      0x0000003f
+
+/* Field definitions within the FID VID High Status MSR : */
+#define MSR_S_HI_MIN_WORKING_VID  0x3f000000
+#define MSR_S_HI_MAX_WORKING_VID  0x003f0000
+#define MSR_S_HI_START_VID        0x00003f00
+#define MSR_S_HI_CURRENT_VID      0x0000003f
+#define MSR_C_HI_STP_GNT_BENIGN	  0x00000001
+
+
+/* Hardware Pstate _PSS and MSR definitions */
+#define USE_HW_PSTATE		0x00000080
+#define HW_PSTATE_MASK 		0x00000007
+#define HW_PSTATE_VALID_MASK 	0x80000000
+#define HW_PSTATE_MAX_MASK	0x000000f0
+#define HW_PSTATE_MAX_SHIFT	4
+#define MSR_PSTATE_DEF_BASE 	0xc0010064 /* base of Pstate MSRs */
+#define MSR_PSTATE_STATUS 	0xc0010063 /* Pstate Status MSR */
+#define MSR_PSTATE_CTRL 	0xc0010062 /* Pstate control MSR */
+#define MSR_PSTATE_CUR_LIMIT	0xc0010061 /* pstate current limit MSR */
+
+/* define the two driver architectures */
+#define CPU_OPTERON 0
+#define CPU_HW_PSTATE 1
+
+
+/*
+ * There are restrictions frequencies have to follow:
+ * - only 1 entry in the low fid table ( <=1.4GHz )
+ * - lowest entry in the high fid table must be >= 2 * the entry in the
+ *   low fid table
+ * - lowest entry in the high fid table must be a <= 200MHz + 2 * the entry
+ *   in the low fid table
+ * - the parts can only step at <= 200 MHz intervals, odd fid values are
+ *   supported in revision G and later revisions.
+ * - lowest frequency must be >= interprocessor hypertransport link speed
+ *   (only applies to MP systems obviously)
+ */
+
+/* fids (frequency identifiers) are arranged in 2 tables - lo and hi */
+#define LO_FID_TABLE_TOP     7	/* fid values marking the boundary    */
+#define HI_FID_TABLE_BOTTOM  8	/* between the low and high tables    */
+
+#define LO_VCOFREQ_TABLE_TOP    1400	/* corresponding vco frequency values */
+#define HI_VCOFREQ_TABLE_BOTTOM 1600
+
+#define MIN_FREQ_RESOLUTION  200 /* fids jump by 2 matching freq jumps by 200 */
+
+#define MAX_FID 0x2a	/* Spec only gives FID values as far as 5 GHz */
+#define LEAST_VID 0x3e	/* Lowest (numerically highest) useful vid value */
+
+#define MIN_FREQ 800	/* Min and max freqs, per spec */
+#define MAX_FREQ 5000
+
+#define INVALID_FID_MASK 0xffffffc0  /* not a valid fid if these bits are set */
+#define INVALID_VID_MASK 0xffffffc0  /* not a valid vid if these bits are set */
+
+#define VID_OFF 0x3f
+
+#define STOP_GRANT_5NS 1 /* min poss memory access latency for voltage change */
+
+#define PLL_LOCK_CONVERSION (1000/5) /* ms to ns, then divide by clock period */
+
+#define MAXIMUM_VID_STEPS 1  /* Current cpus only allow a single step of 25mV */
+#define VST_UNITS_20US 20   /* Voltage Stabilization Time is in units of 20us */
+
+/*
+ * Most values of interest are encoded in a single field of the _PSS
+ * entries: the "control" value.
+ */
+
+#define IRT_SHIFT      30
+#define RVO_SHIFT      28
+#define EXT_TYPE_SHIFT 27
+#define PLL_L_SHIFT    20
+#define MVS_SHIFT      18
+#define VST_SHIFT      11
+#define VID_SHIFT       6
+#define IRT_MASK        3
+#define RVO_MASK        3
+#define EXT_TYPE_MASK   1
+#define PLL_L_MASK   0x7f
+#define MVS_MASK        3
+#define VST_MASK     0x7f
+#define VID_MASK     0x1f
+#define FID_MASK     0x1f
+#define EXT_VID_MASK 0x3f
+#define EXT_FID_MASK 0x3f
+
+
+/*
+ * Version 1.4 of the PSB table. This table is constructed by BIOS and is
+ * to tell the OS's power management driver which VIDs and FIDs are
+ * supported by this particular processor.
+ * If the data in the PSB / PST is wrong, then this driver will program the
+ * wrong values into hardware, which is very likely to lead to a crash.
+ */
+
+#define PSB_ID_STRING      "AMDK7PNOW!"
+#define PSB_ID_STRING_LEN  10
+
+#define PSB_VERSION_1_4  0x14
+
+struct psb_s {
+	u8 signature[10];
+	u8 tableversion;
+	u8 flags1;
+	u16 vstable;
+	u8 flags2;
+	u8 num_tables;
+	u32 cpuid;
+	u8 plllocktime;
+	u8 maxfid;
+	u8 maxvid;
+	u8 numps;
+};
+
+/* Pairs of fid/vid values are appended to the version 1.4 PSB table. */
+struct pst_s {
+	u8 fid;
+	u8 vid;
+};
+
+static int core_voltage_pre_transition(struct powernow_k8_data *data,
+	u32 reqvid, u32 regfid);
+static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid);
+static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
+
+static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index);
+
+static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table);
+static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table);
diff --git a/drivers/cpufreq/sc520_freq.c b/drivers/cpufreq/sc520_freq.c
new file mode 100644
index 00000000000..1e205e6b172
--- /dev/null
+++ b/drivers/cpufreq/sc520_freq.c
@@ -0,0 +1,192 @@
+/*
+ *	sc520_freq.c: cpufreq driver for the AMD Elan sc520
+ *
+ *	Copyright (C) 2005 Sean Young <sean@mess.org>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Based on elanfreq.c
+ *
+ *	2005-03-30: - initial revision
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/delay.h>
+#include <linux/cpufreq.h>
+#include <linux/timex.h>
+#include <linux/io.h>
+
+#include <asm/msr.h>
+
+#define MMCR_BASE	0xfffef000	/* The default base address */
+#define OFFS_CPUCTL	0x2   /* CPU Control Register */
+
+static __u8 __iomem *cpuctl;
+
+#define PFX "sc520_freq: "
+
+static struct cpufreq_frequency_table sc520_freq_table[] = {
+	{0x01,	100000},
+	{0x02,	133000},
+	{0,	CPUFREQ_TABLE_END},
+};
+
+static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu)
+{
+	u8 clockspeed_reg = *cpuctl;
+
+	switch (clockspeed_reg & 0x03) {
+	default:
+		printk(KERN_ERR PFX "error: cpuctl register has unexpected "
+				"value %02x\n", clockspeed_reg);
+	case 0x01:
+		return 100000;
+	case 0x02:
+		return 133000;
+	}
+}
+
+static void sc520_freq_set_cpu_state(unsigned int state)
+{
+
+	struct cpufreq_freqs	freqs;
+	u8 clockspeed_reg;
+
+	freqs.old = sc520_freq_get_cpu_frequency(0);
+	freqs.new = sc520_freq_table[state].frequency;
+	freqs.cpu = 0; /* AMD Elan is UP */
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	pr_debug("attempting to set frequency to %i kHz\n",
+			sc520_freq_table[state].frequency);
+
+	local_irq_disable();
+
+	clockspeed_reg = *cpuctl & ~0x03;
+	*cpuctl = clockspeed_reg | sc520_freq_table[state].index;
+
+	local_irq_enable();
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+};
+
+static int sc520_freq_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, &sc520_freq_table[0]);
+}
+
+static int sc520_freq_target(struct cpufreq_policy *policy,
+			    unsigned int target_freq,
+			    unsigned int relation)
+{
+	unsigned int newstate = 0;
+
+	if (cpufreq_frequency_table_target(policy, sc520_freq_table,
+				target_freq, relation, &newstate))
+		return -EINVAL;
+
+	sc520_freq_set_cpu_state(newstate);
+
+	return 0;
+}
+
+
+/*
+ *	Module init and exit code
+ */
+
+static int sc520_freq_cpu_init(struct cpufreq_policy *policy)
+{
+	struct cpuinfo_x86 *c = &cpu_data(0);
+	int result;
+
+	/* capability check */
+	if (c->x86_vendor != X86_VENDOR_AMD ||
+	    c->x86 != 4 || c->x86_model != 9)
+		return -ENODEV;
+
+	/* cpuinfo and default policy values */
+	policy->cpuinfo.transition_latency = 1000000; /* 1ms */
+	policy->cur = sc520_freq_get_cpu_frequency(0);
+
+	result = cpufreq_frequency_table_cpuinfo(policy, sc520_freq_table);
+	if (result)
+		return result;
+
+	cpufreq_frequency_table_get_attr(sc520_freq_table, policy->cpu);
+
+	return 0;
+}
+
+
+static int sc520_freq_cpu_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	return 0;
+}
+
+
+static struct freq_attr *sc520_freq_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+
+static struct cpufreq_driver sc520_freq_driver = {
+	.get	= sc520_freq_get_cpu_frequency,
+	.verify	= sc520_freq_verify,
+	.target	= sc520_freq_target,
+	.init	= sc520_freq_cpu_init,
+	.exit	= sc520_freq_cpu_exit,
+	.name	= "sc520_freq",
+	.owner	= THIS_MODULE,
+	.attr	= sc520_freq_attr,
+};
+
+
+static int __init sc520_freq_init(void)
+{
+	struct cpuinfo_x86 *c = &cpu_data(0);
+	int err;
+
+	/* Test if we have the right hardware */
+	if (c->x86_vendor != X86_VENDOR_AMD ||
+	    c->x86 != 4 || c->x86_model != 9) {
+		pr_debug("no Elan SC520 processor found!\n");
+		return -ENODEV;
+	}
+	cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1);
+	if (!cpuctl) {
+		printk(KERN_ERR "sc520_freq: error: failed to remap memory\n");
+		return -ENOMEM;
+	}
+
+	err = cpufreq_register_driver(&sc520_freq_driver);
+	if (err)
+		iounmap(cpuctl);
+
+	return err;
+}
+
+
+static void __exit sc520_freq_exit(void)
+{
+	cpufreq_unregister_driver(&sc520_freq_driver);
+	iounmap(cpuctl);
+}
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sean Young <sean@mess.org>");
+MODULE_DESCRIPTION("cpufreq driver for AMD's Elan sc520 CPU");
+
+module_init(sc520_freq_init);
+module_exit(sc520_freq_exit);
+
diff --git a/drivers/cpufreq/speedstep-centrino.c b/drivers/cpufreq/speedstep-centrino.c
new file mode 100644
index 00000000000..6ea3455def2
--- /dev/null
+++ b/drivers/cpufreq/speedstep-centrino.c
@@ -0,0 +1,633 @@
+/*
+ * cpufreq driver for Enhanced SpeedStep, as found in Intel's Pentium
+ * M (part of the Centrino chipset).
+ *
+ * Since the original Pentium M, most new Intel CPUs support Enhanced
+ * SpeedStep.
+ *
+ * Despite the "SpeedStep" in the name, this is almost entirely unlike
+ * traditional SpeedStep.
+ *
+ * Modelled on speedstep.c
+ *
+ * Copyright (C) 2003 Jeremy Fitzhardinge <jeremy@goop.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/sched.h>	/* current */
+#include <linux/delay.h>
+#include <linux/compiler.h>
+#include <linux/gfp.h>
+
+#include <asm/msr.h>
+#include <asm/processor.h>
+#include <asm/cpufeature.h>
+
+#define PFX		"speedstep-centrino: "
+#define MAINTAINER	"cpufreq@vger.kernel.org"
+
+#define INTEL_MSR_RANGE	(0xffff)
+
+struct cpu_id
+{
+	__u8	x86;            /* CPU family */
+	__u8	x86_model;	/* model */
+	__u8	x86_mask;	/* stepping */
+};
+
+enum {
+	CPU_BANIAS,
+	CPU_DOTHAN_A1,
+	CPU_DOTHAN_A2,
+	CPU_DOTHAN_B0,
+	CPU_MP4HT_D0,
+	CPU_MP4HT_E0,
+};
+
+static const struct cpu_id cpu_ids[] = {
+	[CPU_BANIAS]	= { 6,  9, 5 },
+	[CPU_DOTHAN_A1]	= { 6, 13, 1 },
+	[CPU_DOTHAN_A2]	= { 6, 13, 2 },
+	[CPU_DOTHAN_B0]	= { 6, 13, 6 },
+	[CPU_MP4HT_D0]	= {15,  3, 4 },
+	[CPU_MP4HT_E0]	= {15,  4, 1 },
+};
+#define N_IDS	ARRAY_SIZE(cpu_ids)
+
+struct cpu_model
+{
+	const struct cpu_id *cpu_id;
+	const char	*model_name;
+	unsigned	max_freq; /* max clock in kHz */
+
+	struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */
+};
+static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c,
+				  const struct cpu_id *x);
+
+/* Operating points for current CPU */
+static DEFINE_PER_CPU(struct cpu_model *, centrino_model);
+static DEFINE_PER_CPU(const struct cpu_id *, centrino_cpu);
+
+static struct cpufreq_driver centrino_driver;
+
+#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE
+
+/* Computes the correct form for IA32_PERF_CTL MSR for a particular
+   frequency/voltage operating point; frequency in MHz, volts in mV.
+   This is stored as "index" in the structure. */
+#define OP(mhz, mv)							\
+	{								\
+		.frequency = (mhz) * 1000,				\
+		.index = (((mhz)/100) << 8) | ((mv - 700) / 16)		\
+	}
+
+/*
+ * These voltage tables were derived from the Intel Pentium M
+ * datasheet, document 25261202.pdf, Table 5.  I have verified they
+ * are consistent with my IBM ThinkPad X31, which has a 1.3GHz Pentium
+ * M.
+ */
+
+/* Ultra Low Voltage Intel Pentium M processor 900MHz (Banias) */
+static struct cpufreq_frequency_table banias_900[] =
+{
+	OP(600,  844),
+	OP(800,  988),
+	OP(900, 1004),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Ultra Low Voltage Intel Pentium M processor 1000MHz (Banias) */
+static struct cpufreq_frequency_table banias_1000[] =
+{
+	OP(600,   844),
+	OP(800,   972),
+	OP(900,   988),
+	OP(1000, 1004),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Low Voltage Intel Pentium M processor 1.10GHz (Banias) */
+static struct cpufreq_frequency_table banias_1100[] =
+{
+	OP( 600,  956),
+	OP( 800, 1020),
+	OP( 900, 1100),
+	OP(1000, 1164),
+	OP(1100, 1180),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+
+
+/* Low Voltage Intel Pentium M processor 1.20GHz (Banias) */
+static struct cpufreq_frequency_table banias_1200[] =
+{
+	OP( 600,  956),
+	OP( 800, 1004),
+	OP( 900, 1020),
+	OP(1000, 1100),
+	OP(1100, 1164),
+	OP(1200, 1180),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.30GHz (Banias) */
+static struct cpufreq_frequency_table banias_1300[] =
+{
+	OP( 600,  956),
+	OP( 800, 1260),
+	OP(1000, 1292),
+	OP(1200, 1356),
+	OP(1300, 1388),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.40GHz (Banias) */
+static struct cpufreq_frequency_table banias_1400[] =
+{
+	OP( 600,  956),
+	OP( 800, 1180),
+	OP(1000, 1308),
+	OP(1200, 1436),
+	OP(1400, 1484),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.50GHz (Banias) */
+static struct cpufreq_frequency_table banias_1500[] =
+{
+	OP( 600,  956),
+	OP( 800, 1116),
+	OP(1000, 1228),
+	OP(1200, 1356),
+	OP(1400, 1452),
+	OP(1500, 1484),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.60GHz (Banias) */
+static struct cpufreq_frequency_table banias_1600[] =
+{
+	OP( 600,  956),
+	OP( 800, 1036),
+	OP(1000, 1164),
+	OP(1200, 1276),
+	OP(1400, 1420),
+	OP(1600, 1484),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.70GHz (Banias) */
+static struct cpufreq_frequency_table banias_1700[] =
+{
+	OP( 600,  956),
+	OP( 800, 1004),
+	OP(1000, 1116),
+	OP(1200, 1228),
+	OP(1400, 1308),
+	OP(1700, 1484),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+#undef OP
+
+#define _BANIAS(cpuid, max, name)	\
+{	.cpu_id		= cpuid,	\
+	.model_name	= "Intel(R) Pentium(R) M processor " name "MHz", \
+	.max_freq	= (max)*1000,	\
+	.op_points	= banias_##max,	\
+}
+#define BANIAS(max)	_BANIAS(&cpu_ids[CPU_BANIAS], max, #max)
+
+/* CPU models, their operating frequency range, and freq/voltage
+   operating points */
+static struct cpu_model models[] =
+{
+	_BANIAS(&cpu_ids[CPU_BANIAS], 900, " 900"),
+	BANIAS(1000),
+	BANIAS(1100),
+	BANIAS(1200),
+	BANIAS(1300),
+	BANIAS(1400),
+	BANIAS(1500),
+	BANIAS(1600),
+	BANIAS(1700),
+
+	/* NULL model_name is a wildcard */
+	{ &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL },
+	{ &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL },
+	{ &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL },
+	{ &cpu_ids[CPU_MP4HT_D0], NULL, 0, NULL },
+	{ &cpu_ids[CPU_MP4HT_E0], NULL, 0, NULL },
+
+	{ NULL, }
+};
+#undef _BANIAS
+#undef BANIAS
+
+static int centrino_cpu_init_table(struct cpufreq_policy *policy)
+{
+	struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu);
+	struct cpu_model *model;
+
+	for(model = models; model->cpu_id != NULL; model++)
+		if (centrino_verify_cpu_id(cpu, model->cpu_id) &&
+		    (model->model_name == NULL ||
+		     strcmp(cpu->x86_model_id, model->model_name) == 0))
+			break;
+
+	if (model->cpu_id == NULL) {
+		/* No match at all */
+		pr_debug("no support for CPU model \"%s\": "
+		       "send /proc/cpuinfo to " MAINTAINER "\n",
+		       cpu->x86_model_id);
+		return -ENOENT;
+	}
+
+	if (model->op_points == NULL) {
+		/* Matched a non-match */
+		pr_debug("no table support for CPU model \"%s\"\n",
+		       cpu->x86_model_id);
+		pr_debug("try using the acpi-cpufreq driver\n");
+		return -ENOENT;
+	}
+
+	per_cpu(centrino_model, policy->cpu) = model;
+
+	pr_debug("found \"%s\": max frequency: %dkHz\n",
+	       model->model_name, model->max_freq);
+
+	return 0;
+}
+
+#else
+static inline int centrino_cpu_init_table(struct cpufreq_policy *policy)
+{
+	return -ENODEV;
+}
+#endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */
+
+static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c,
+				  const struct cpu_id *x)
+{
+	if ((c->x86 == x->x86) &&
+	    (c->x86_model == x->x86_model) &&
+	    (c->x86_mask == x->x86_mask))
+		return 1;
+	return 0;
+}
+
+/* To be called only after centrino_model is initialized */
+static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe)
+{
+	int i;
+
+	/*
+	 * Extract clock in kHz from PERF_CTL value
+	 * for centrino, as some DSDTs are buggy.
+	 * Ideally, this can be done using the acpi_data structure.
+	 */
+	if ((per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_BANIAS]) ||
+	    (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_A1]) ||
+	    (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_B0])) {
+		msr = (msr >> 8) & 0xff;
+		return msr * 100000;
+	}
+
+	if ((!per_cpu(centrino_model, cpu)) ||
+	    (!per_cpu(centrino_model, cpu)->op_points))
+		return 0;
+
+	msr &= 0xffff;
+	for (i = 0;
+		per_cpu(centrino_model, cpu)->op_points[i].frequency
+							!= CPUFREQ_TABLE_END;
+	     i++) {
+		if (msr == per_cpu(centrino_model, cpu)->op_points[i].index)
+			return per_cpu(centrino_model, cpu)->
+							op_points[i].frequency;
+	}
+	if (failsafe)
+		return per_cpu(centrino_model, cpu)->op_points[i-1].frequency;
+	else
+		return 0;
+}
+
+/* Return the current CPU frequency in kHz */
+static unsigned int get_cur_freq(unsigned int cpu)
+{
+	unsigned l, h;
+	unsigned clock_freq;
+
+	rdmsr_on_cpu(cpu, MSR_IA32_PERF_STATUS, &l, &h);
+	clock_freq = extract_clock(l, cpu, 0);
+
+	if (unlikely(clock_freq == 0)) {
+		/*
+		 * On some CPUs, we can see transient MSR values (which are
+		 * not present in _PSS), while CPU is doing some automatic
+		 * P-state transition (like TM2). Get the last freq set 
+		 * in PERF_CTL.
+		 */
+		rdmsr_on_cpu(cpu, MSR_IA32_PERF_CTL, &l, &h);
+		clock_freq = extract_clock(l, cpu, 1);
+	}
+	return clock_freq;
+}
+
+
+static int centrino_cpu_init(struct cpufreq_policy *policy)
+{
+	struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu);
+	unsigned freq;
+	unsigned l, h;
+	int ret;
+	int i;
+
+	/* Only Intel makes Enhanced Speedstep-capable CPUs */
+	if (cpu->x86_vendor != X86_VENDOR_INTEL ||
+	    !cpu_has(cpu, X86_FEATURE_EST))
+		return -ENODEV;
+
+	if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC))
+		centrino_driver.flags |= CPUFREQ_CONST_LOOPS;
+
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	for (i = 0; i < N_IDS; i++)
+		if (centrino_verify_cpu_id(cpu, &cpu_ids[i]))
+			break;
+
+	if (i != N_IDS)
+		per_cpu(centrino_cpu, policy->cpu) = &cpu_ids[i];
+
+	if (!per_cpu(centrino_cpu, policy->cpu)) {
+		pr_debug("found unsupported CPU with "
+		"Enhanced SpeedStep: send /proc/cpuinfo to "
+		MAINTAINER "\n");
+		return -ENODEV;
+	}
+
+	if (centrino_cpu_init_table(policy)) {
+		return -ENODEV;
+	}
+
+	/* Check to see if Enhanced SpeedStep is enabled, and try to
+	   enable it if not. */
+	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+
+	if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
+		l |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP;
+		pr_debug("trying to enable Enhanced SpeedStep (%x)\n", l);
+		wrmsr(MSR_IA32_MISC_ENABLE, l, h);
+
+		/* check to see if it stuck */
+		rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+		if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
+			printk(KERN_INFO PFX
+				"couldn't enable Enhanced SpeedStep\n");
+			return -ENODEV;
+		}
+	}
+
+	freq = get_cur_freq(policy->cpu);
+	policy->cpuinfo.transition_latency = 10000;
+						/* 10uS transition latency */
+	policy->cur = freq;
+
+	pr_debug("centrino_cpu_init: cur=%dkHz\n", policy->cur);
+
+	ret = cpufreq_frequency_table_cpuinfo(policy,
+		per_cpu(centrino_model, policy->cpu)->op_points);
+	if (ret)
+		return (ret);
+
+	cpufreq_frequency_table_get_attr(
+		per_cpu(centrino_model, policy->cpu)->op_points, policy->cpu);
+
+	return 0;
+}
+
+static int centrino_cpu_exit(struct cpufreq_policy *policy)
+{
+	unsigned int cpu = policy->cpu;
+
+	if (!per_cpu(centrino_model, cpu))
+		return -ENODEV;
+
+	cpufreq_frequency_table_put_attr(cpu);
+
+	per_cpu(centrino_model, cpu) = NULL;
+
+	return 0;
+}
+
+/**
+ * centrino_verify - verifies a new CPUFreq policy
+ * @policy: new policy
+ *
+ * Limit must be within this model's frequency range at least one
+ * border included.
+ */
+static int centrino_verify (struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy,
+			per_cpu(centrino_model, policy->cpu)->op_points);
+}
+
+/**
+ * centrino_setpolicy - set a new CPUFreq policy
+ * @policy: new policy
+ * @target_freq: the target frequency
+ * @relation: how that frequency relates to achieved frequency
+ *	(CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ *
+ * Sets a new CPUFreq policy.
+ */
+static int centrino_target (struct cpufreq_policy *policy,
+			    unsigned int target_freq,
+			    unsigned int relation)
+{
+	unsigned int    newstate = 0;
+	unsigned int	msr, oldmsr = 0, h = 0, cpu = policy->cpu;
+	struct cpufreq_freqs	freqs;
+	int			retval = 0;
+	unsigned int		j, k, first_cpu, tmp;
+	cpumask_var_t covered_cpus;
+
+	if (unlikely(!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL)))
+		return -ENOMEM;
+
+	if (unlikely(per_cpu(centrino_model, cpu) == NULL)) {
+		retval = -ENODEV;
+		goto out;
+	}
+
+	if (unlikely(cpufreq_frequency_table_target(policy,
+			per_cpu(centrino_model, cpu)->op_points,
+			target_freq,
+			relation,
+			&newstate))) {
+		retval = -EINVAL;
+		goto out;
+	}
+
+	first_cpu = 1;
+	for_each_cpu(j, policy->cpus) {
+		int good_cpu;
+
+		/* cpufreq holds the hotplug lock, so we are safe here */
+		if (!cpu_online(j))
+			continue;
+
+		/*
+		 * Support for SMP systems.
+		 * Make sure we are running on CPU that wants to change freq
+		 */
+		if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
+			good_cpu = cpumask_any_and(policy->cpus,
+						   cpu_online_mask);
+		else
+			good_cpu = j;
+
+		if (good_cpu >= nr_cpu_ids) {
+			pr_debug("couldn't limit to CPUs in this domain\n");
+			retval = -EAGAIN;
+			if (first_cpu) {
+				/* We haven't started the transition yet. */
+				goto out;
+			}
+			break;
+		}
+
+		msr = per_cpu(centrino_model, cpu)->op_points[newstate].index;
+
+		if (first_cpu) {
+			rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h);
+			if (msr == (oldmsr & 0xffff)) {
+				pr_debug("no change needed - msr was and needs "
+					"to be %x\n", oldmsr);
+				retval = 0;
+				goto out;
+			}
+
+			freqs.old = extract_clock(oldmsr, cpu, 0);
+			freqs.new = extract_clock(msr, cpu, 0);
+
+			pr_debug("target=%dkHz old=%d new=%d msr=%04x\n",
+				target_freq, freqs.old, freqs.new, msr);
+
+			for_each_cpu(k, policy->cpus) {
+				if (!cpu_online(k))
+					continue;
+				freqs.cpu = k;
+				cpufreq_notify_transition(&freqs,
+					CPUFREQ_PRECHANGE);
+			}
+
+			first_cpu = 0;
+			/* all but 16 LSB are reserved, treat them with care */
+			oldmsr &= ~0xffff;
+			msr &= 0xffff;
+			oldmsr |= msr;
+		}
+
+		wrmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, oldmsr, h);
+		if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
+			break;
+
+		cpumask_set_cpu(j, covered_cpus);
+	}
+
+	for_each_cpu(k, policy->cpus) {
+		if (!cpu_online(k))
+			continue;
+		freqs.cpu = k;
+		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	}
+
+	if (unlikely(retval)) {
+		/*
+		 * We have failed halfway through the frequency change.
+		 * We have sent callbacks to policy->cpus and
+		 * MSRs have already been written on coverd_cpus.
+		 * Best effort undo..
+		 */
+
+		for_each_cpu(j, covered_cpus)
+			wrmsr_on_cpu(j, MSR_IA32_PERF_CTL, oldmsr, h);
+
+		tmp = freqs.new;
+		freqs.new = freqs.old;
+		freqs.old = tmp;
+		for_each_cpu(j, policy->cpus) {
+			if (!cpu_online(j))
+				continue;
+			cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+			cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+		}
+	}
+	retval = 0;
+
+out:
+	free_cpumask_var(covered_cpus);
+	return retval;
+}
+
+static struct freq_attr* centrino_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver centrino_driver = {
+	.name		= "centrino", /* should be speedstep-centrino,
+					 but there's a 16 char limit */
+	.init		= centrino_cpu_init,
+	.exit		= centrino_cpu_exit,
+	.verify		= centrino_verify,
+	.target		= centrino_target,
+	.get		= get_cur_freq,
+	.attr           = centrino_attr,
+	.owner		= THIS_MODULE,
+};
+
+
+/**
+ * centrino_init - initializes the Enhanced SpeedStep CPUFreq driver
+ *
+ * Initializes the Enhanced SpeedStep support. Returns -ENODEV on
+ * unsupported devices, -ENOENT if there's no voltage table for this
+ * particular CPU model, -EINVAL on problems during initiatization,
+ * and zero on success.
+ *
+ * This is quite picky.  Not only does the CPU have to advertise the
+ * "est" flag in the cpuid capability flags, we look for a specific
+ * CPU model and stepping, and we need to have the exact model name in
+ * our voltage tables.  That is, be paranoid about not releasing
+ * someone's valuable magic smoke.
+ */
+static int __init centrino_init(void)
+{
+	struct cpuinfo_x86 *cpu = &cpu_data(0);
+
+	if (!cpu_has(cpu, X86_FEATURE_EST))
+		return -ENODEV;
+
+	return cpufreq_register_driver(&centrino_driver);
+}
+
+static void __exit centrino_exit(void)
+{
+	cpufreq_unregister_driver(&centrino_driver);
+}
+
+MODULE_AUTHOR ("Jeremy Fitzhardinge <jeremy@goop.org>");
+MODULE_DESCRIPTION ("Enhanced SpeedStep driver for Intel Pentium M processors.");
+MODULE_LICENSE ("GPL");
+
+late_initcall(centrino_init);
+module_exit(centrino_exit);
diff --git a/drivers/cpufreq/speedstep-ich.c b/drivers/cpufreq/speedstep-ich.c
new file mode 100644
index 00000000000..a748ce782fe
--- /dev/null
+++ b/drivers/cpufreq/speedstep-ich.c
@@ -0,0 +1,448 @@
+/*
+ * (C) 2001  Dave Jones, Arjan van de ven.
+ * (C) 2002 - 2003  Dominik Brodowski <linux@brodo.de>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *  Based upon reverse engineered information, and on Intel documentation
+ *  for chipsets ICH2-M and ICH3-M.
+ *
+ *  Many thanks to Ducrot Bruno for finding and fixing the last
+ *  "missing link" for ICH2-M/ICH3-M support, and to Thomas Winkler
+ *  for extensive testing.
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+
+/*********************************************************************
+ *                        SPEEDSTEP - DEFINITIONS                    *
+ *********************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+
+#include "speedstep-lib.h"
+
+
+/* speedstep_chipset:
+ *   It is necessary to know which chipset is used. As accesses to
+ * this device occur at various places in this module, we need a
+ * static struct pci_dev * pointing to that device.
+ */
+static struct pci_dev *speedstep_chipset_dev;
+
+
+/* speedstep_processor
+ */
+static enum speedstep_processor speedstep_processor;
+
+static u32 pmbase;
+
+/*
+ *   There are only two frequency states for each processor. Values
+ * are in kHz for the time being.
+ */
+static struct cpufreq_frequency_table speedstep_freqs[] = {
+	{SPEEDSTEP_HIGH,	0},
+	{SPEEDSTEP_LOW,		0},
+	{0,			CPUFREQ_TABLE_END},
+};
+
+
+/**
+ * speedstep_find_register - read the PMBASE address
+ *
+ * Returns: -ENODEV if no register could be found
+ */
+static int speedstep_find_register(void)
+{
+	if (!speedstep_chipset_dev)
+		return -ENODEV;
+
+	/* get PMBASE */
+	pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase);
+	if (!(pmbase & 0x01)) {
+		printk(KERN_ERR "speedstep-ich: could not find speedstep register\n");
+		return -ENODEV;
+	}
+
+	pmbase &= 0xFFFFFFFE;
+	if (!pmbase) {
+		printk(KERN_ERR "speedstep-ich: could not find speedstep register\n");
+		return -ENODEV;
+	}
+
+	pr_debug("pmbase is 0x%x\n", pmbase);
+	return 0;
+}
+
+/**
+ * speedstep_set_state - set the SpeedStep state
+ * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
+ *
+ *   Tries to change the SpeedStep state.  Can be called from
+ *   smp_call_function_single.
+ */
+static void speedstep_set_state(unsigned int state)
+{
+	u8 pm2_blk;
+	u8 value;
+	unsigned long flags;
+
+	if (state > 0x1)
+		return;
+
+	/* Disable IRQs */
+	local_irq_save(flags);
+
+	/* read state */
+	value = inb(pmbase + 0x50);
+
+	pr_debug("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
+
+	/* write new state */
+	value &= 0xFE;
+	value |= state;
+
+	pr_debug("writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase);
+
+	/* Disable bus master arbitration */
+	pm2_blk = inb(pmbase + 0x20);
+	pm2_blk |= 0x01;
+	outb(pm2_blk, (pmbase + 0x20));
+
+	/* Actual transition */
+	outb(value, (pmbase + 0x50));
+
+	/* Restore bus master arbitration */
+	pm2_blk &= 0xfe;
+	outb(pm2_blk, (pmbase + 0x20));
+
+	/* check if transition was successful */
+	value = inb(pmbase + 0x50);
+
+	/* Enable IRQs */
+	local_irq_restore(flags);
+
+	pr_debug("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
+
+	if (state == (value & 0x1))
+		pr_debug("change to %u MHz succeeded\n",
+			speedstep_get_frequency(speedstep_processor) / 1000);
+	else
+		printk(KERN_ERR "cpufreq: change failed - I/O error\n");
+
+	return;
+}
+
+/* Wrapper for smp_call_function_single. */
+static void _speedstep_set_state(void *_state)
+{
+	speedstep_set_state(*(unsigned int *)_state);
+}
+
+/**
+ * speedstep_activate - activate SpeedStep control in the chipset
+ *
+ *   Tries to activate the SpeedStep status and control registers.
+ * Returns -EINVAL on an unsupported chipset, and zero on success.
+ */
+static int speedstep_activate(void)
+{
+	u16 value = 0;
+
+	if (!speedstep_chipset_dev)
+		return -EINVAL;
+
+	pci_read_config_word(speedstep_chipset_dev, 0x00A0, &value);
+	if (!(value & 0x08)) {
+		value |= 0x08;
+		pr_debug("activating SpeedStep (TM) registers\n");
+		pci_write_config_word(speedstep_chipset_dev, 0x00A0, value);
+	}
+
+	return 0;
+}
+
+
+/**
+ * speedstep_detect_chipset - detect the Southbridge which contains SpeedStep logic
+ *
+ *   Detects ICH2-M, ICH3-M and ICH4-M so far. The pci_dev points to
+ * the LPC bridge / PM module which contains all power-management
+ * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected
+ * chipset, or zero on failure.
+ */
+static unsigned int speedstep_detect_chipset(void)
+{
+	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+			      PCI_DEVICE_ID_INTEL_82801DB_12,
+			      PCI_ANY_ID, PCI_ANY_ID,
+			      NULL);
+	if (speedstep_chipset_dev)
+		return 4; /* 4-M */
+
+	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+			      PCI_DEVICE_ID_INTEL_82801CA_12,
+			      PCI_ANY_ID, PCI_ANY_ID,
+			      NULL);
+	if (speedstep_chipset_dev)
+		return 3; /* 3-M */
+
+
+	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+			      PCI_DEVICE_ID_INTEL_82801BA_10,
+			      PCI_ANY_ID, PCI_ANY_ID,
+			      NULL);
+	if (speedstep_chipset_dev) {
+		/* speedstep.c causes lockups on Dell Inspirons 8000 and
+		 * 8100 which use a pretty old revision of the 82815
+		 * host brige. Abort on these systems.
+		 */
+		static struct pci_dev *hostbridge;
+
+		hostbridge  = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+			      PCI_DEVICE_ID_INTEL_82815_MC,
+			      PCI_ANY_ID, PCI_ANY_ID,
+			      NULL);
+
+		if (!hostbridge)
+			return 2; /* 2-M */
+
+		if (hostbridge->revision < 5) {
+			pr_debug("hostbridge does not support speedstep\n");
+			speedstep_chipset_dev = NULL;
+			pci_dev_put(hostbridge);
+			return 0;
+		}
+
+		pci_dev_put(hostbridge);
+		return 2; /* 2-M */
+	}
+
+	return 0;
+}
+
+static void get_freq_data(void *_speed)
+{
+	unsigned int *speed = _speed;
+
+	*speed = speedstep_get_frequency(speedstep_processor);
+}
+
+static unsigned int speedstep_get(unsigned int cpu)
+{
+	unsigned int speed;
+
+	/* You're supposed to ensure CPU is online. */
+	if (smp_call_function_single(cpu, get_freq_data, &speed, 1) != 0)
+		BUG();
+
+	pr_debug("detected %u kHz as current frequency\n", speed);
+	return speed;
+}
+
+/**
+ * speedstep_target - set a new CPUFreq policy
+ * @policy: new policy
+ * @target_freq: the target frequency
+ * @relation: how that frequency relates to achieved frequency
+ *	(CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ *
+ * Sets a new CPUFreq policy.
+ */
+static int speedstep_target(struct cpufreq_policy *policy,
+			     unsigned int target_freq,
+			     unsigned int relation)
+{
+	unsigned int newstate = 0, policy_cpu;
+	struct cpufreq_freqs freqs;
+	int i;
+
+	if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0],
+				target_freq, relation, &newstate))
+		return -EINVAL;
+
+	policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask);
+	freqs.old = speedstep_get(policy_cpu);
+	freqs.new = speedstep_freqs[newstate].frequency;
+	freqs.cpu = policy->cpu;
+
+	pr_debug("transiting from %u to %u kHz\n", freqs.old, freqs.new);
+
+	/* no transition necessary */
+	if (freqs.old == freqs.new)
+		return 0;
+
+	for_each_cpu(i, policy->cpus) {
+		freqs.cpu = i;
+		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	}
+
+	smp_call_function_single(policy_cpu, _speedstep_set_state, &newstate,
+				 true);
+
+	for_each_cpu(i, policy->cpus) {
+		freqs.cpu = i;
+		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	}
+
+	return 0;
+}
+
+
+/**
+ * speedstep_verify - verifies a new CPUFreq policy
+ * @policy: new policy
+ *
+ * Limit must be within speedstep_low_freq and speedstep_high_freq, with
+ * at least one border included.
+ */
+static int speedstep_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]);
+}
+
+struct get_freqs {
+	struct cpufreq_policy *policy;
+	int ret;
+};
+
+static void get_freqs_on_cpu(void *_get_freqs)
+{
+	struct get_freqs *get_freqs = _get_freqs;
+
+	get_freqs->ret =
+		speedstep_get_freqs(speedstep_processor,
+			    &speedstep_freqs[SPEEDSTEP_LOW].frequency,
+			    &speedstep_freqs[SPEEDSTEP_HIGH].frequency,
+			    &get_freqs->policy->cpuinfo.transition_latency,
+			    &speedstep_set_state);
+}
+
+static int speedstep_cpu_init(struct cpufreq_policy *policy)
+{
+	int result;
+	unsigned int policy_cpu, speed;
+	struct get_freqs gf;
+
+	/* only run on CPU to be set, or on its sibling */
+#ifdef CONFIG_SMP
+	cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu));
+#endif
+	policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask);
+
+	/* detect low and high frequency and transition latency */
+	gf.policy = policy;
+	smp_call_function_single(policy_cpu, get_freqs_on_cpu, &gf, 1);
+	if (gf.ret)
+		return gf.ret;
+
+	/* get current speed setting */
+	speed = speedstep_get(policy_cpu);
+	if (!speed)
+		return -EIO;
+
+	pr_debug("currently at %s speed setting - %i MHz\n",
+		(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency)
+		? "low" : "high",
+		(speed / 1000));
+
+	/* cpuinfo and default policy values */
+	policy->cur = speed;
+
+	result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs);
+	if (result)
+		return result;
+
+	cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
+
+	return 0;
+}
+
+
+static int speedstep_cpu_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	return 0;
+}
+
+static struct freq_attr *speedstep_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+
+static struct cpufreq_driver speedstep_driver = {
+	.name	= "speedstep-ich",
+	.verify	= speedstep_verify,
+	.target	= speedstep_target,
+	.init	= speedstep_cpu_init,
+	.exit	= speedstep_cpu_exit,
+	.get	= speedstep_get,
+	.owner	= THIS_MODULE,
+	.attr	= speedstep_attr,
+};
+
+
+/**
+ * speedstep_init - initializes the SpeedStep CPUFreq driver
+ *
+ *   Initializes the SpeedStep support. Returns -ENODEV on unsupported
+ * devices, -EINVAL on problems during initiatization, and zero on
+ * success.
+ */
+static int __init speedstep_init(void)
+{
+	/* detect processor */
+	speedstep_processor = speedstep_detect_processor();
+	if (!speedstep_processor) {
+		pr_debug("Intel(R) SpeedStep(TM) capable processor "
+				"not found\n");
+		return -ENODEV;
+	}
+
+	/* detect chipset */
+	if (!speedstep_detect_chipset()) {
+		pr_debug("Intel(R) SpeedStep(TM) for this chipset not "
+				"(yet) available.\n");
+		return -ENODEV;
+	}
+
+	/* activate speedstep support */
+	if (speedstep_activate()) {
+		pci_dev_put(speedstep_chipset_dev);
+		return -EINVAL;
+	}
+
+	if (speedstep_find_register())
+		return -ENODEV;
+
+	return cpufreq_register_driver(&speedstep_driver);
+}
+
+
+/**
+ * speedstep_exit - unregisters SpeedStep support
+ *
+ *   Unregisters SpeedStep support.
+ */
+static void __exit speedstep_exit(void)
+{
+	pci_dev_put(speedstep_chipset_dev);
+	cpufreq_unregister_driver(&speedstep_driver);
+}
+
+
+MODULE_AUTHOR("Dave Jones <davej@redhat.com>, "
+		"Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("Speedstep driver for Intel mobile processors on chipsets "
+		"with ICH-M southbridges.");
+MODULE_LICENSE("GPL");
+
+module_init(speedstep_init);
+module_exit(speedstep_exit);
diff --git a/drivers/cpufreq/speedstep-lib.c b/drivers/cpufreq/speedstep-lib.c
new file mode 100644
index 00000000000..8af2d2fd9d5
--- /dev/null
+++ b/drivers/cpufreq/speedstep-lib.c
@@ -0,0 +1,478 @@
+/*
+ * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  Library for common functions for Intel SpeedStep v.1 and v.2 support
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+
+#include <asm/msr.h>
+#include <asm/tsc.h>
+#include "speedstep-lib.h"
+
+#define PFX "speedstep-lib: "
+
+#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
+static int relaxed_check;
+#else
+#define relaxed_check 0
+#endif
+
+/*********************************************************************
+ *                   GET PROCESSOR CORE SPEED IN KHZ                 *
+ *********************************************************************/
+
+static unsigned int pentium3_get_frequency(enum speedstep_processor processor)
+{
+	/* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */
+	struct {
+		unsigned int ratio;	/* Frequency Multiplier (x10) */
+		u8 bitmap;		/* power on configuration bits
+					[27, 25:22] (in MSR 0x2a) */
+	} msr_decode_mult[] = {
+		{ 30, 0x01 },
+		{ 35, 0x05 },
+		{ 40, 0x02 },
+		{ 45, 0x06 },
+		{ 50, 0x00 },
+		{ 55, 0x04 },
+		{ 60, 0x0b },
+		{ 65, 0x0f },
+		{ 70, 0x09 },
+		{ 75, 0x0d },
+		{ 80, 0x0a },
+		{ 85, 0x26 },
+		{ 90, 0x20 },
+		{ 100, 0x2b },
+		{ 0, 0xff }	/* error or unknown value */
+	};
+
+	/* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */
+	struct {
+		unsigned int value;	/* Front Side Bus speed in MHz */
+		u8 bitmap;		/* power on configuration bits [18: 19]
+					(in MSR 0x2a) */
+	} msr_decode_fsb[] = {
+		{  66, 0x0 },
+		{ 100, 0x2 },
+		{ 133, 0x1 },
+		{   0, 0xff}
+	};
+
+	u32 msr_lo, msr_tmp;
+	int i = 0, j = 0;
+
+	/* read MSR 0x2a - we only need the low 32 bits */
+	rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
+	pr_debug("P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
+	msr_tmp = msr_lo;
+
+	/* decode the FSB */
+	msr_tmp &= 0x00c0000;
+	msr_tmp >>= 18;
+	while (msr_tmp != msr_decode_fsb[i].bitmap) {
+		if (msr_decode_fsb[i].bitmap == 0xff)
+			return 0;
+		i++;
+	}
+
+	/* decode the multiplier */
+	if (processor == SPEEDSTEP_CPU_PIII_C_EARLY) {
+		pr_debug("workaround for early PIIIs\n");
+		msr_lo &= 0x03c00000;
+	} else
+		msr_lo &= 0x0bc00000;
+	msr_lo >>= 22;
+	while (msr_lo != msr_decode_mult[j].bitmap) {
+		if (msr_decode_mult[j].bitmap == 0xff)
+			return 0;
+		j++;
+	}
+
+	pr_debug("speed is %u\n",
+		(msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100));
+
+	return msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100;
+}
+
+
+static unsigned int pentiumM_get_frequency(void)
+{
+	u32 msr_lo, msr_tmp;
+
+	rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
+	pr_debug("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
+
+	/* see table B-2 of 24547212.pdf */
+	if (msr_lo & 0x00040000) {
+		printk(KERN_DEBUG PFX "PM - invalid FSB: 0x%x 0x%x\n",
+				msr_lo, msr_tmp);
+		return 0;
+	}
+
+	msr_tmp = (msr_lo >> 22) & 0x1f;
+	pr_debug("bits 22-26 are 0x%x, speed is %u\n",
+			msr_tmp, (msr_tmp * 100 * 1000));
+
+	return msr_tmp * 100 * 1000;
+}
+
+static unsigned int pentium_core_get_frequency(void)
+{
+	u32 fsb = 0;
+	u32 msr_lo, msr_tmp;
+	int ret;
+
+	rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp);
+	/* see table B-2 of 25366920.pdf */
+	switch (msr_lo & 0x07) {
+	case 5:
+		fsb = 100000;
+		break;
+	case 1:
+		fsb = 133333;
+		break;
+	case 3:
+		fsb = 166667;
+		break;
+	case 2:
+		fsb = 200000;
+		break;
+	case 0:
+		fsb = 266667;
+		break;
+	case 4:
+		fsb = 333333;
+		break;
+	default:
+		printk(KERN_ERR "PCORE - MSR_FSB_FREQ undefined value");
+	}
+
+	rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
+	pr_debug("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n",
+			msr_lo, msr_tmp);
+
+	msr_tmp = (msr_lo >> 22) & 0x1f;
+	pr_debug("bits 22-26 are 0x%x, speed is %u\n",
+			msr_tmp, (msr_tmp * fsb));
+
+	ret = (msr_tmp * fsb);
+	return ret;
+}
+
+
+static unsigned int pentium4_get_frequency(void)
+{
+	struct cpuinfo_x86 *c = &boot_cpu_data;
+	u32 msr_lo, msr_hi, mult;
+	unsigned int fsb = 0;
+	unsigned int ret;
+	u8 fsb_code;
+
+	/* Pentium 4 Model 0 and 1 do not have the Core Clock Frequency
+	 * to System Bus Frequency Ratio Field in the Processor Frequency
+	 * Configuration Register of the MSR. Therefore the current
+	 * frequency cannot be calculated and has to be measured.
+	 */
+	if (c->x86_model < 2)
+		return cpu_khz;
+
+	rdmsr(0x2c, msr_lo, msr_hi);
+
+	pr_debug("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi);
+
+	/* decode the FSB: see IA-32 Intel (C) Architecture Software
+	 * Developer's Manual, Volume 3: System Prgramming Guide,
+	 * revision #12 in Table B-1: MSRs in the Pentium 4 and
+	 * Intel Xeon Processors, on page B-4 and B-5.
+	 */
+	fsb_code = (msr_lo >> 16) & 0x7;
+	switch (fsb_code) {
+	case 0:
+		fsb = 100 * 1000;
+		break;
+	case 1:
+		fsb = 13333 * 10;
+		break;
+	case 2:
+		fsb = 200 * 1000;
+		break;
+	}
+
+	if (!fsb)
+		printk(KERN_DEBUG PFX "couldn't detect FSB speed. "
+				"Please send an e-mail to <linux@brodo.de>\n");
+
+	/* Multiplier. */
+	mult = msr_lo >> 24;
+
+	pr_debug("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n",
+			fsb, mult, (fsb * mult));
+
+	ret = (fsb * mult);
+	return ret;
+}
+
+
+/* Warning: may get called from smp_call_function_single. */
+unsigned int speedstep_get_frequency(enum speedstep_processor processor)
+{
+	switch (processor) {
+	case SPEEDSTEP_CPU_PCORE:
+		return pentium_core_get_frequency();
+	case SPEEDSTEP_CPU_PM:
+		return pentiumM_get_frequency();
+	case SPEEDSTEP_CPU_P4D:
+	case SPEEDSTEP_CPU_P4M:
+		return pentium4_get_frequency();
+	case SPEEDSTEP_CPU_PIII_T:
+	case SPEEDSTEP_CPU_PIII_C:
+	case SPEEDSTEP_CPU_PIII_C_EARLY:
+		return pentium3_get_frequency(processor);
+	default:
+		return 0;
+	};
+	return 0;
+}
+EXPORT_SYMBOL_GPL(speedstep_get_frequency);
+
+
+/*********************************************************************
+ *                 DETECT SPEEDSTEP-CAPABLE PROCESSOR                *
+ *********************************************************************/
+
+unsigned int speedstep_detect_processor(void)
+{
+	struct cpuinfo_x86 *c = &cpu_data(0);
+	u32 ebx, msr_lo, msr_hi;
+
+	pr_debug("x86: %x, model: %x\n", c->x86, c->x86_model);
+
+	if ((c->x86_vendor != X86_VENDOR_INTEL) ||
+	    ((c->x86 != 6) && (c->x86 != 0xF)))
+		return 0;
+
+	if (c->x86 == 0xF) {
+		/* Intel Mobile Pentium 4-M
+		 * or Intel Mobile Pentium 4 with 533 MHz FSB */
+		if (c->x86_model != 2)
+			return 0;
+
+		ebx = cpuid_ebx(0x00000001);
+		ebx &= 0x000000FF;
+
+		pr_debug("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask);
+
+		switch (c->x86_mask) {
+		case 4:
+			/*
+			 * B-stepping [M-P4-M]
+			 * sample has ebx = 0x0f, production has 0x0e.
+			 */
+			if ((ebx == 0x0e) || (ebx == 0x0f))
+				return SPEEDSTEP_CPU_P4M;
+			break;
+		case 7:
+			/*
+			 * C-stepping [M-P4-M]
+			 * needs to have ebx=0x0e, else it's a celeron:
+			 * cf. 25130917.pdf / page 7, footnote 5 even
+			 * though 25072120.pdf / page 7 doesn't say
+			 * samples are only of B-stepping...
+			 */
+			if (ebx == 0x0e)
+				return SPEEDSTEP_CPU_P4M;
+			break;
+		case 9:
+			/*
+			 * D-stepping [M-P4-M or M-P4/533]
+			 *
+			 * this is totally strange: CPUID 0x0F29 is
+			 * used by M-P4-M, M-P4/533 and(!) Celeron CPUs.
+			 * The latter need to be sorted out as they don't
+			 * support speedstep.
+			 * Celerons with CPUID 0x0F29 may have either
+			 * ebx=0x8 or 0xf -- 25130917.pdf doesn't say anything
+			 * specific.
+			 * M-P4-Ms may have either ebx=0xe or 0xf [see above]
+			 * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf]
+			 * also, M-P4M HTs have ebx=0x8, too
+			 * For now, they are distinguished by the model_id
+			 * string
+			 */
+			if ((ebx == 0x0e) ||
+				(strstr(c->x86_model_id,
+				    "Mobile Intel(R) Pentium(R) 4") != NULL))
+				return SPEEDSTEP_CPU_P4M;
+			break;
+		default:
+			break;
+		}
+		return 0;
+	}
+
+	switch (c->x86_model) {
+	case 0x0B: /* Intel PIII [Tualatin] */
+		/* cpuid_ebx(1) is 0x04 for desktop PIII,
+		 * 0x06 for mobile PIII-M */
+		ebx = cpuid_ebx(0x00000001);
+		pr_debug("ebx is %x\n", ebx);
+
+		ebx &= 0x000000FF;
+
+		if (ebx != 0x06)
+			return 0;
+
+		/* So far all PIII-M processors support SpeedStep. See
+		 * Intel's 24540640.pdf of June 2003
+		 */
+		return SPEEDSTEP_CPU_PIII_T;
+
+	case 0x08: /* Intel PIII [Coppermine] */
+
+		/* all mobile PIII Coppermines have FSB 100 MHz
+		 * ==> sort out a few desktop PIIIs. */
+		rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi);
+		pr_debug("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n",
+				msr_lo, msr_hi);
+		msr_lo &= 0x00c0000;
+		if (msr_lo != 0x0080000)
+			return 0;
+
+		/*
+		 * If the processor is a mobile version,
+		 * platform ID has bit 50 set
+		 * it has SpeedStep technology if either
+		 * bit 56 or 57 is set
+		 */
+		rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi);
+		pr_debug("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n",
+				msr_lo, msr_hi);
+		if ((msr_hi & (1<<18)) &&
+		    (relaxed_check ? 1 : (msr_hi & (3<<24)))) {
+			if (c->x86_mask == 0x01) {
+				pr_debug("early PIII version\n");
+				return SPEEDSTEP_CPU_PIII_C_EARLY;
+			} else
+				return SPEEDSTEP_CPU_PIII_C;
+		}
+
+	default:
+		return 0;
+	}
+}
+EXPORT_SYMBOL_GPL(speedstep_detect_processor);
+
+
+/*********************************************************************
+ *                     DETECT SPEEDSTEP SPEEDS                       *
+ *********************************************************************/
+
+unsigned int speedstep_get_freqs(enum speedstep_processor processor,
+				  unsigned int *low_speed,
+				  unsigned int *high_speed,
+				  unsigned int *transition_latency,
+				  void (*set_state) (unsigned int state))
+{
+	unsigned int prev_speed;
+	unsigned int ret = 0;
+	unsigned long flags;
+	struct timeval tv1, tv2;
+
+	if ((!processor) || (!low_speed) || (!high_speed) || (!set_state))
+		return -EINVAL;
+
+	pr_debug("trying to determine both speeds\n");
+
+	/* get current speed */
+	prev_speed = speedstep_get_frequency(processor);
+	if (!prev_speed)
+		return -EIO;
+
+	pr_debug("previous speed is %u\n", prev_speed);
+
+	local_irq_save(flags);
+
+	/* switch to low state */
+	set_state(SPEEDSTEP_LOW);
+	*low_speed = speedstep_get_frequency(processor);
+	if (!*low_speed) {
+		ret = -EIO;
+		goto out;
+	}
+
+	pr_debug("low speed is %u\n", *low_speed);
+
+	/* start latency measurement */
+	if (transition_latency)
+		do_gettimeofday(&tv1);
+
+	/* switch to high state */
+	set_state(SPEEDSTEP_HIGH);
+
+	/* end latency measurement */
+	if (transition_latency)
+		do_gettimeofday(&tv2);
+
+	*high_speed = speedstep_get_frequency(processor);
+	if (!*high_speed) {
+		ret = -EIO;
+		goto out;
+	}
+
+	pr_debug("high speed is %u\n", *high_speed);
+
+	if (*low_speed == *high_speed) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	/* switch to previous state, if necessary */
+	if (*high_speed != prev_speed)
+		set_state(SPEEDSTEP_LOW);
+
+	if (transition_latency) {
+		*transition_latency = (tv2.tv_sec - tv1.tv_sec) * USEC_PER_SEC +
+			tv2.tv_usec - tv1.tv_usec;
+		pr_debug("transition latency is %u uSec\n", *transition_latency);
+
+		/* convert uSec to nSec and add 20% for safety reasons */
+		*transition_latency *= 1200;
+
+		/* check if the latency measurement is too high or too low
+		 * and set it to a safe value (500uSec) in that case
+		 */
+		if (*transition_latency > 10000000 ||
+		    *transition_latency < 50000) {
+			printk(KERN_WARNING PFX "frequency transition "
+					"measured seems out of range (%u "
+					"nSec), falling back to a safe one of"
+					"%u nSec.\n",
+					*transition_latency, 500000);
+			*transition_latency = 500000;
+		}
+	}
+
+out:
+	local_irq_restore(flags);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(speedstep_get_freqs);
+
+#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
+module_param(relaxed_check, int, 0444);
+MODULE_PARM_DESC(relaxed_check,
+		"Don't do all checks for speedstep capability.");
+#endif
+
+MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("Library for Intel SpeedStep 1 or 2 cpufreq drivers.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/cpufreq/speedstep-lib.h b/drivers/cpufreq/speedstep-lib.h
new file mode 100644
index 00000000000..70d9cea1219
--- /dev/null
+++ b/drivers/cpufreq/speedstep-lib.h
@@ -0,0 +1,49 @@
+/*
+ * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  Library for common functions for Intel SpeedStep v.1 and v.2 support
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+
+
+/* processors */
+enum speedstep_processor {
+	SPEEDSTEP_CPU_PIII_C_EARLY = 0x00000001,  /* Coppermine core */
+	SPEEDSTEP_CPU_PIII_C	   = 0x00000002,  /* Coppermine core */
+	SPEEDSTEP_CPU_PIII_T	   = 0x00000003,  /* Tualatin core */
+	SPEEDSTEP_CPU_P4M	   = 0x00000004,  /* P4-M  */
+/* the following processors are not speedstep-capable and are not auto-detected
+ * in speedstep_detect_processor(). However, their speed can be detected using
+ * the speedstep_get_frequency() call. */
+	SPEEDSTEP_CPU_PM	   = 0xFFFFFF03,  /* Pentium M  */
+	SPEEDSTEP_CPU_P4D	   = 0xFFFFFF04,  /* desktop P4  */
+	SPEEDSTEP_CPU_PCORE	   = 0xFFFFFF05,  /* Core */
+};
+
+/* speedstep states -- only two of them */
+
+#define SPEEDSTEP_HIGH	0x00000000
+#define SPEEDSTEP_LOW	0x00000001
+
+
+/* detect a speedstep-capable processor */
+extern enum speedstep_processor speedstep_detect_processor(void);
+
+/* detect the current speed (in khz) of the processor */
+extern unsigned int speedstep_get_frequency(enum speedstep_processor processor);
+
+
+/* detect the low and high speeds of the processor. The callback
+ * set_state"'s first argument is either SPEEDSTEP_HIGH or
+ * SPEEDSTEP_LOW; the second argument is zero so that no
+ * cpufreq_notify_transition calls are initiated.
+ */
+extern unsigned int speedstep_get_freqs(enum speedstep_processor processor,
+	unsigned int *low_speed,
+	unsigned int *high_speed,
+	unsigned int *transition_latency,
+	void (*set_state) (unsigned int state));
diff --git a/drivers/cpufreq/speedstep-smi.c b/drivers/cpufreq/speedstep-smi.c
new file mode 100644
index 00000000000..c76ead3490b
--- /dev/null
+++ b/drivers/cpufreq/speedstep-smi.c
@@ -0,0 +1,464 @@
+/*
+ * Intel SpeedStep SMI driver.
+ *
+ * (C) 2003  Hiroshi Miura <miura@da-cha.org>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ */
+
+
+/*********************************************************************
+ *                        SPEEDSTEP - DEFINITIONS                    *
+ *********************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <asm/ist.h>
+
+#include "speedstep-lib.h"
+
+/* speedstep system management interface port/command.
+ *
+ * These parameters are got from IST-SMI BIOS call.
+ * If user gives it, these are used.
+ *
+ */
+static int smi_port;
+static int smi_cmd;
+static unsigned int smi_sig;
+
+/* info about the processor */
+static enum speedstep_processor speedstep_processor;
+
+/*
+ * There are only two frequency states for each processor. Values
+ * are in kHz for the time being.
+ */
+static struct cpufreq_frequency_table speedstep_freqs[] = {
+	{SPEEDSTEP_HIGH,	0},
+	{SPEEDSTEP_LOW,		0},
+	{0,			CPUFREQ_TABLE_END},
+};
+
+#define GET_SPEEDSTEP_OWNER 0
+#define GET_SPEEDSTEP_STATE 1
+#define SET_SPEEDSTEP_STATE 2
+#define GET_SPEEDSTEP_FREQS 4
+
+/* how often shall the SMI call be tried if it failed, e.g. because
+ * of DMA activity going on? */
+#define SMI_TRIES 5
+
+/**
+ * speedstep_smi_ownership
+ */
+static int speedstep_smi_ownership(void)
+{
+	u32 command, result, magic, dummy;
+	u32 function = GET_SPEEDSTEP_OWNER;
+	unsigned char magic_data[] = "Copyright (c) 1999 Intel Corporation";
+
+	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
+	magic = virt_to_phys(magic_data);
+
+	pr_debug("trying to obtain ownership with command %x at port %x\n",
+			command, smi_port);
+
+	__asm__ __volatile__(
+		"push %%ebp\n"
+		"out %%al, (%%dx)\n"
+		"pop %%ebp\n"
+		: "=D" (result),
+		  "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy),
+		  "=S" (dummy)
+		: "a" (command), "b" (function), "c" (0), "d" (smi_port),
+		  "D" (0), "S" (magic)
+		: "memory"
+	);
+
+	pr_debug("result is %x\n", result);
+
+	return result;
+}
+
+/**
+ * speedstep_smi_get_freqs - get SpeedStep preferred & current freq.
+ * @low: the low frequency value is placed here
+ * @high: the high frequency value is placed here
+ *
+ * Only available on later SpeedStep-enabled systems, returns false results or
+ * even hangs [cf. bugme.osdl.org # 1422] on earlier systems. Empirical testing
+ * shows that the latter occurs if !(ist_info.event & 0xFFFF).
+ */
+static int speedstep_smi_get_freqs(unsigned int *low, unsigned int *high)
+{
+	u32 command, result = 0, edi, high_mhz, low_mhz, dummy;
+	u32 state = 0;
+	u32 function = GET_SPEEDSTEP_FREQS;
+
+	if (!(ist_info.event & 0xFFFF)) {
+		pr_debug("bug #1422 -- can't read freqs from BIOS\n");
+		return -ENODEV;
+	}
+
+	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
+
+	pr_debug("trying to determine frequencies with command %x at port %x\n",
+			command, smi_port);
+
+	__asm__ __volatile__(
+		"push %%ebp\n"
+		"out %%al, (%%dx)\n"
+		"pop %%ebp"
+		: "=a" (result),
+		  "=b" (high_mhz),
+		  "=c" (low_mhz),
+		  "=d" (state), "=D" (edi), "=S" (dummy)
+		: "a" (command),
+		  "b" (function),
+		  "c" (state),
+		  "d" (smi_port), "S" (0), "D" (0)
+	);
+
+	pr_debug("result %x, low_freq %u, high_freq %u\n",
+			result, low_mhz, high_mhz);
+
+	/* abort if results are obviously incorrect... */
+	if ((high_mhz + low_mhz) < 600)
+		return -EINVAL;
+
+	*high = high_mhz * 1000;
+	*low  = low_mhz  * 1000;
+
+	return result;
+}
+
+/**
+ * speedstep_get_state - set the SpeedStep state
+ * @state: processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
+ *
+ */
+static int speedstep_get_state(void)
+{
+	u32 function = GET_SPEEDSTEP_STATE;
+	u32 result, state, edi, command, dummy;
+
+	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
+
+	pr_debug("trying to determine current setting with command %x "
+		"at port %x\n", command, smi_port);
+
+	__asm__ __volatile__(
+		"push %%ebp\n"
+		"out %%al, (%%dx)\n"
+		"pop %%ebp\n"
+		: "=a" (result),
+		  "=b" (state), "=D" (edi),
+		  "=c" (dummy), "=d" (dummy), "=S" (dummy)
+		: "a" (command), "b" (function), "c" (0),
+		  "d" (smi_port), "S" (0), "D" (0)
+	);
+
+	pr_debug("state is %x, result is %x\n", state, result);
+
+	return state & 1;
+}
+
+
+/**
+ * speedstep_set_state - set the SpeedStep state
+ * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
+ *
+ */
+static void speedstep_set_state(unsigned int state)
+{
+	unsigned int result = 0, command, new_state, dummy;
+	unsigned long flags;
+	unsigned int function = SET_SPEEDSTEP_STATE;
+	unsigned int retry = 0;
+
+	if (state > 0x1)
+		return;
+
+	/* Disable IRQs */
+	local_irq_save(flags);
+
+	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
+
+	pr_debug("trying to set frequency to state %u "
+		"with command %x at port %x\n",
+		state, command, smi_port);
+
+	do {
+		if (retry) {
+			pr_debug("retry %u, previous result %u, waiting...\n",
+					retry, result);
+			mdelay(retry * 50);
+		}
+		retry++;
+		__asm__ __volatile__(
+			"push %%ebp\n"
+			"out %%al, (%%dx)\n"
+			"pop %%ebp"
+			: "=b" (new_state), "=D" (result),
+			  "=c" (dummy), "=a" (dummy),
+			  "=d" (dummy), "=S" (dummy)
+			: "a" (command), "b" (function), "c" (state),
+			  "d" (smi_port), "S" (0), "D" (0)
+			);
+	} while ((new_state != state) && (retry <= SMI_TRIES));
+
+	/* enable IRQs */
+	local_irq_restore(flags);
+
+	if (new_state == state)
+		pr_debug("change to %u MHz succeeded after %u tries "
+			"with result %u\n",
+			(speedstep_freqs[new_state].frequency / 1000),
+			retry, result);
+	else
+		printk(KERN_ERR "cpufreq: change to state %u "
+			"failed with new_state %u and result %u\n",
+			state, new_state, result);
+
+	return;
+}
+
+
+/**
+ * speedstep_target - set a new CPUFreq policy
+ * @policy: new policy
+ * @target_freq: new freq
+ * @relation:
+ *
+ * Sets a new CPUFreq policy/freq.
+ */
+static int speedstep_target(struct cpufreq_policy *policy,
+			unsigned int target_freq, unsigned int relation)
+{
+	unsigned int newstate = 0;
+	struct cpufreq_freqs freqs;
+
+	if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0],
+				target_freq, relation, &newstate))
+		return -EINVAL;
+
+	freqs.old = speedstep_freqs[speedstep_get_state()].frequency;
+	freqs.new = speedstep_freqs[newstate].frequency;
+	freqs.cpu = 0; /* speedstep.c is UP only driver */
+
+	if (freqs.old == freqs.new)
+		return 0;
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	speedstep_set_state(newstate);
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	return 0;
+}
+
+
+/**
+ * speedstep_verify - verifies a new CPUFreq policy
+ * @policy: new policy
+ *
+ * Limit must be within speedstep_low_freq and speedstep_high_freq, with
+ * at least one border included.
+ */
+static int speedstep_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]);
+}
+
+
+static int speedstep_cpu_init(struct cpufreq_policy *policy)
+{
+	int result;
+	unsigned int speed, state;
+	unsigned int *low, *high;
+
+	/* capability check */
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	result = speedstep_smi_ownership();
+	if (result) {
+		pr_debug("fails in acquiring ownership of a SMI interface.\n");
+		return -EINVAL;
+	}
+
+	/* detect low and high frequency */
+	low = &speedstep_freqs[SPEEDSTEP_LOW].frequency;
+	high = &speedstep_freqs[SPEEDSTEP_HIGH].frequency;
+
+	result = speedstep_smi_get_freqs(low, high);
+	if (result) {
+		/* fall back to speedstep_lib.c dection mechanism:
+		 * try both states out */
+		pr_debug("could not detect low and high frequencies "
+				"by SMI call.\n");
+		result = speedstep_get_freqs(speedstep_processor,
+				low, high,
+				NULL,
+				&speedstep_set_state);
+
+		if (result) {
+			pr_debug("could not detect two different speeds"
+					" -- aborting.\n");
+			return result;
+		} else
+			pr_debug("workaround worked.\n");
+	}
+
+	/* get current speed setting */
+	state = speedstep_get_state();
+	speed = speedstep_freqs[state].frequency;
+
+	pr_debug("currently at %s speed setting - %i MHz\n",
+		(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency)
+		? "low" : "high",
+		(speed / 1000));
+
+	/* cpuinfo and default policy values */
+	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	policy->cur = speed;
+
+	result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs);
+	if (result)
+		return result;
+
+	cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
+
+	return 0;
+}
+
+static int speedstep_cpu_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	return 0;
+}
+
+static unsigned int speedstep_get(unsigned int cpu)
+{
+	if (cpu)
+		return -ENODEV;
+	return speedstep_get_frequency(speedstep_processor);
+}
+
+
+static int speedstep_resume(struct cpufreq_policy *policy)
+{
+	int result = speedstep_smi_ownership();
+
+	if (result)
+		pr_debug("fails in re-acquiring ownership of a SMI interface.\n");
+
+	return result;
+}
+
+static struct freq_attr *speedstep_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver speedstep_driver = {
+	.name		= "speedstep-smi",
+	.verify		= speedstep_verify,
+	.target		= speedstep_target,
+	.init		= speedstep_cpu_init,
+	.exit		= speedstep_cpu_exit,
+	.get		= speedstep_get,
+	.resume		= speedstep_resume,
+	.owner		= THIS_MODULE,
+	.attr		= speedstep_attr,
+};
+
+/**
+ * speedstep_init - initializes the SpeedStep CPUFreq driver
+ *
+ *   Initializes the SpeedStep support. Returns -ENODEV on unsupported
+ * BIOS, -EINVAL on problems during initiatization, and zero on
+ * success.
+ */
+static int __init speedstep_init(void)
+{
+	speedstep_processor = speedstep_detect_processor();
+
+	switch (speedstep_processor) {
+	case SPEEDSTEP_CPU_PIII_T:
+	case SPEEDSTEP_CPU_PIII_C:
+	case SPEEDSTEP_CPU_PIII_C_EARLY:
+		break;
+	default:
+		speedstep_processor = 0;
+	}
+
+	if (!speedstep_processor) {
+		pr_debug("No supported Intel CPU detected.\n");
+		return -ENODEV;
+	}
+
+	pr_debug("signature:0x%.8ulx, command:0x%.8ulx, "
+		"event:0x%.8ulx, perf_level:0x%.8ulx.\n",
+		ist_info.signature, ist_info.command,
+		ist_info.event, ist_info.perf_level);
+
+	/* Error if no IST-SMI BIOS or no PARM
+		 sig= 'ISGE' aka 'Intel Speedstep Gate E' */
+	if ((ist_info.signature !=  0x47534943) && (
+	    (smi_port == 0) || (smi_cmd == 0)))
+		return -ENODEV;
+
+	if (smi_sig == 1)
+		smi_sig = 0x47534943;
+	else
+		smi_sig = ist_info.signature;
+
+	/* setup smi_port from MODLULE_PARM or BIOS */
+	if ((smi_port > 0xff) || (smi_port < 0))
+		return -EINVAL;
+	else if (smi_port == 0)
+		smi_port = ist_info.command & 0xff;
+
+	if ((smi_cmd > 0xff) || (smi_cmd < 0))
+		return -EINVAL;
+	else if (smi_cmd == 0)
+		smi_cmd = (ist_info.command >> 16) & 0xff;
+
+	return cpufreq_register_driver(&speedstep_driver);
+}
+
+
+/**
+ * speedstep_exit - unregisters SpeedStep support
+ *
+ *   Unregisters SpeedStep support.
+ */
+static void __exit speedstep_exit(void)
+{
+	cpufreq_unregister_driver(&speedstep_driver);
+}
+
+module_param(smi_port, int, 0444);
+module_param(smi_cmd,  int, 0444);
+module_param(smi_sig, uint, 0444);
+
+MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value "
+		"-- Intel's default setting is 0xb2");
+MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value "
+		"-- Intel's default setting is 0x82");
+MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the "
+		"SMI interface.");
+
+MODULE_AUTHOR("Hiroshi Miura");
+MODULE_DESCRIPTION("Speedstep driver for IST applet SMI interface.");
+MODULE_LICENSE("GPL");
+
+module_init(speedstep_init);
+module_exit(speedstep_exit);
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index b3a25a55ba2..efba163595d 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -157,4 +157,6 @@ config SIGMA
 	  If unsure, say N here.  Drivers that need these helpers will select
 	  this option automatically.
 
+source "drivers/firmware/google/Kconfig"
+
 endmenu
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 00bb0b80a79..47338c97912 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -13,3 +13,5 @@ obj-$(CONFIG_ISCSI_IBFT_FIND)	+= iscsi_ibft_find.o
 obj-$(CONFIG_ISCSI_IBFT)	+= iscsi_ibft.o
 obj-$(CONFIG_FIRMWARE_MEMMAP)	+= memmap.o
 obj-$(CONFIG_SIGMA)		+= sigma.o
+
+obj-$(CONFIG_GOOGLE_FIRMWARE)	+= google/
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
index 96c25d93eed..f1b7f659d3c 100644
--- a/drivers/firmware/edd.c
+++ b/drivers/firmware/edd.c
@@ -531,8 +531,8 @@ static int
 edd_has_edd30(struct edd_device *edev)
 {
 	struct edd_info *info;
-	int i, nonzero_path = 0;
-	char c;
+	int i;
+	u8 csum = 0;
 
 	if (!edev)
 		return 0;
@@ -544,16 +544,16 @@ edd_has_edd30(struct edd_device *edev)
 		return 0;
 	}
 
-	for (i = 30; i <= 73; i++) {
-		c = *(((uint8_t *) info) + i + 4);
-		if (c) {
-			nonzero_path++;
-			break;
-		}
-	}
-	if (!nonzero_path) {
+
+	/* We support only T13 spec */
+	if (info->params.device_path_info_length != 44)
+		return 0;
+
+	for (i = 30; i < info->params.device_path_info_length + 30; i++)
+		csum += *(((u8 *)&info->params) + i);
+
+	if (csum)
 		return 0;
-	}
 
 	return 1;
 }
diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c
index ff0c373e3bb..a2d2f1f0d4f 100644
--- a/drivers/firmware/efivars.c
+++ b/drivers/firmware/efivars.c
@@ -677,8 +677,8 @@ create_efivars_bin_attributes(struct efivars *efivars)
 
 	return 0;
 out_free:
-	kfree(efivars->new_var);
-	efivars->new_var = NULL;
+	kfree(efivars->del_var);
+	efivars->del_var = NULL;
 	kfree(efivars->new_var);
 	efivars->new_var = NULL;
 	return error;
@@ -803,6 +803,8 @@ efivars_init(void)
 	ops.set_variable = efi.set_variable;
 	ops.get_next_variable = efi.get_next_variable;
 	error = register_efivars(&__efivars, &ops, efi_kobj);
+	if (error)
+		goto err_put;
 
 	/* Don't forget the systab entry */
 	error = sysfs_create_group(efi_kobj, &efi_subsys_attr_group);
@@ -810,18 +812,25 @@ efivars_init(void)
 		printk(KERN_ERR
 		       "efivars: Sysfs attribute export failed with error %d.\n",
 		       error);
-		unregister_efivars(&__efivars);
-		kobject_put(efi_kobj);
+		goto err_unregister;
 	}
 
+	return 0;
+
+err_unregister:
+	unregister_efivars(&__efivars);
+err_put:
+	kobject_put(efi_kobj);
 	return error;
 }
 
 static void __exit
 efivars_exit(void)
 {
-	unregister_efivars(&__efivars);
-	kobject_put(efi_kobj);
+	if (efi_enabled) {
+		unregister_efivars(&__efivars);
+		kobject_put(efi_kobj);
+	}
 }
 
 module_init(efivars_init);
diff --git a/drivers/firmware/google/Kconfig b/drivers/firmware/google/Kconfig
new file mode 100644
index 00000000000..87096b6ca5c
--- /dev/null
+++ b/drivers/firmware/google/Kconfig
@@ -0,0 +1,31 @@
+config GOOGLE_FIRMWARE
+	bool "Google Firmware Drivers"
+	depends on X86
+	default n
+	help
+	  These firmware drivers are used by Google's servers.  They are
+	  only useful if you are working directly on one of their
+	  proprietary servers.  If in doubt, say "N".
+
+menu "Google Firmware Drivers"
+	depends on GOOGLE_FIRMWARE
+
+config GOOGLE_SMI
+	tristate "SMI interface for Google platforms"
+	depends on ACPI && DMI
+	select EFI_VARS
+	help
+	  Say Y here if you want to enable SMI callbacks for Google
+	  platforms.  This provides an interface for writing to and
+	  clearing the EFI event log and reading and writing NVRAM
+	  variables.
+
+config GOOGLE_MEMCONSOLE
+	tristate "Firmware Memory Console"
+	depends on DMI
+	help
+	  This option enables the kernel to search for a firmware log in
+	  the EBDA on Google servers.  If found, this log is exported to
+	  userland in the file /sys/firmware/log.
+
+endmenu
diff --git a/drivers/firmware/google/Makefile b/drivers/firmware/google/Makefile
new file mode 100644
index 00000000000..54a294e3cb6
--- /dev/null
+++ b/drivers/firmware/google/Makefile
@@ -0,0 +1,3 @@
+
+obj-$(CONFIG_GOOGLE_SMI)		+= gsmi.o
+obj-$(CONFIG_GOOGLE_MEMCONSOLE)		+= memconsole.o
diff --git a/drivers/firmware/google/gsmi.c b/drivers/firmware/google/gsmi.c
new file mode 100644
index 00000000000..fa7f0b3e81d
--- /dev/null
+++ b/drivers/firmware/google/gsmi.c
@@ -0,0 +1,940 @@
+/*
+ * Copyright 2010 Google Inc. All Rights Reserved.
+ * Author: dlaurie@google.com (Duncan Laurie)
+ *
+ * Re-worked to expose sysfs APIs by mikew@google.com (Mike Waychison)
+ *
+ * EFI SMI interface for Google platforms
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/ioctl.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/dmi.h>
+#include <linux/kdebug.h>
+#include <linux/reboot.h>
+#include <linux/efi.h>
+
+#define GSMI_SHUTDOWN_CLEAN	0	/* Clean Shutdown */
+/* TODO(mikew@google.com): Tie in HARDLOCKUP_DETECTOR with NMIWDT */
+#define GSMI_SHUTDOWN_NMIWDT	1	/* NMI Watchdog */
+#define GSMI_SHUTDOWN_PANIC	2	/* Panic */
+#define GSMI_SHUTDOWN_OOPS	3	/* Oops */
+#define GSMI_SHUTDOWN_DIE	4	/* Die -- No longer meaningful */
+#define GSMI_SHUTDOWN_MCE	5	/* Machine Check */
+#define GSMI_SHUTDOWN_SOFTWDT	6	/* Software Watchdog */
+#define GSMI_SHUTDOWN_MBE	7	/* Uncorrected ECC */
+#define GSMI_SHUTDOWN_TRIPLE	8	/* Triple Fault */
+
+#define DRIVER_VERSION		"1.0"
+#define GSMI_GUID_SIZE		16
+#define GSMI_BUF_SIZE		1024
+#define GSMI_BUF_ALIGN		sizeof(u64)
+#define GSMI_CALLBACK		0xef
+
+/* SMI return codes */
+#define GSMI_SUCCESS		0x00
+#define GSMI_UNSUPPORTED2	0x03
+#define GSMI_LOG_FULL		0x0b
+#define GSMI_VAR_NOT_FOUND	0x0e
+#define GSMI_HANDSHAKE_SPIN	0x7d
+#define GSMI_HANDSHAKE_CF	0x7e
+#define GSMI_HANDSHAKE_NONE	0x7f
+#define GSMI_INVALID_PARAMETER	0x82
+#define GSMI_UNSUPPORTED	0x83
+#define GSMI_BUFFER_TOO_SMALL	0x85
+#define GSMI_NOT_READY		0x86
+#define GSMI_DEVICE_ERROR	0x87
+#define GSMI_NOT_FOUND		0x8e
+
+#define QUIRKY_BOARD_HASH 0x78a30a50
+
+/* Internally used commands passed to the firmware */
+#define GSMI_CMD_GET_NVRAM_VAR		0x01
+#define GSMI_CMD_GET_NEXT_VAR		0x02
+#define GSMI_CMD_SET_NVRAM_VAR		0x03
+#define GSMI_CMD_SET_EVENT_LOG		0x08
+#define GSMI_CMD_CLEAR_EVENT_LOG	0x09
+#define GSMI_CMD_CLEAR_CONFIG		0x20
+#define GSMI_CMD_HANDSHAKE_TYPE		0xC1
+
+/* Magic entry type for kernel events */
+#define GSMI_LOG_ENTRY_TYPE_KERNEL     0xDEAD
+
+/* SMI buffers must be in 32bit physical address space */
+struct gsmi_buf {
+	u8 *start;			/* start of buffer */
+	size_t length;			/* length of buffer */
+	dma_addr_t handle;		/* dma allocation handle */
+	u32 address;			/* physical address of buffer */
+};
+
+struct gsmi_device {
+	struct platform_device *pdev;	/* platform device */
+	struct gsmi_buf *name_buf;	/* variable name buffer */
+	struct gsmi_buf *data_buf;	/* generic data buffer */
+	struct gsmi_buf *param_buf;	/* parameter buffer */
+	spinlock_t lock;		/* serialize access to SMIs */
+	u16 smi_cmd;			/* SMI command port */
+	int handshake_type;		/* firmware handler interlock type */
+	struct dma_pool *dma_pool;	/* DMA buffer pool */
+} gsmi_dev;
+
+/* Packed structures for communicating with the firmware */
+struct gsmi_nvram_var_param {
+	efi_guid_t	guid;
+	u32		name_ptr;
+	u32		attributes;
+	u32		data_len;
+	u32		data_ptr;
+} __packed;
+
+struct gsmi_get_next_var_param {
+	u8	guid[GSMI_GUID_SIZE];
+	u32	name_ptr;
+	u32	name_len;
+} __packed;
+
+struct gsmi_set_eventlog_param {
+	u32	data_ptr;
+	u32	data_len;
+	u32	type;
+} __packed;
+
+/* Event log formats */
+struct gsmi_log_entry_type_1 {
+	u16	type;
+	u32	instance;
+} __packed;
+
+
+/*
+ * Some platforms don't have explicit SMI handshake
+ * and need to wait for SMI to complete.
+ */
+#define GSMI_DEFAULT_SPINCOUNT	0x10000
+static unsigned int spincount = GSMI_DEFAULT_SPINCOUNT;
+module_param(spincount, uint, 0600);
+MODULE_PARM_DESC(spincount,
+	"The number of loop iterations to use when using the spin handshake.");
+
+static struct gsmi_buf *gsmi_buf_alloc(void)
+{
+	struct gsmi_buf *smibuf;
+
+	smibuf = kzalloc(sizeof(*smibuf), GFP_KERNEL);
+	if (!smibuf) {
+		printk(KERN_ERR "gsmi: out of memory\n");
+		return NULL;
+	}
+
+	/* allocate buffer in 32bit address space */
+	smibuf->start = dma_pool_alloc(gsmi_dev.dma_pool, GFP_KERNEL,
+				       &smibuf->handle);
+	if (!smibuf->start) {
+		printk(KERN_ERR "gsmi: failed to allocate name buffer\n");
+		kfree(smibuf);
+		return NULL;
+	}
+
+	/* fill in the buffer handle */
+	smibuf->length = GSMI_BUF_SIZE;
+	smibuf->address = (u32)virt_to_phys(smibuf->start);
+
+	return smibuf;
+}
+
+static void gsmi_buf_free(struct gsmi_buf *smibuf)
+{
+	if (smibuf) {
+		if (smibuf->start)
+			dma_pool_free(gsmi_dev.dma_pool, smibuf->start,
+				      smibuf->handle);
+		kfree(smibuf);
+	}
+}
+
+/*
+ * Make a call to gsmi func(sub).  GSMI error codes are translated to
+ * in-kernel errnos (0 on success, -ERRNO on error).
+ */
+static int gsmi_exec(u8 func, u8 sub)
+{
+	u16 cmd = (sub << 8) | func;
+	u16 result = 0;
+	int rc = 0;
+
+	/*
+	 * AH  : Subfunction number
+	 * AL  : Function number
+	 * EBX : Parameter block address
+	 * DX  : SMI command port
+	 *
+	 * Three protocols here. See also the comment in gsmi_init().
+	 */
+	if (gsmi_dev.handshake_type == GSMI_HANDSHAKE_CF) {
+		/*
+		 * If handshake_type == HANDSHAKE_CF then set CF on the
+		 * way in and wait for the handler to clear it; this avoids
+		 * corrupting register state on those chipsets which have
+		 * a delay between writing the SMI trigger register and
+		 * entering SMM.
+		 */
+		asm volatile (
+			"stc\n"
+			"outb %%al, %%dx\n"
+		"1:      jc 1b\n"
+			: "=a" (result)
+			: "0" (cmd),
+			  "d" (gsmi_dev.smi_cmd),
+			  "b" (gsmi_dev.param_buf->address)
+			: "memory", "cc"
+		);
+	} else if (gsmi_dev.handshake_type == GSMI_HANDSHAKE_SPIN) {
+		/*
+		 * If handshake_type == HANDSHAKE_SPIN we spin a
+		 * hundred-ish usecs to ensure the SMI has triggered.
+		 */
+		asm volatile (
+			"outb %%al, %%dx\n"
+		"1:      loop 1b\n"
+			: "=a" (result)
+			: "0" (cmd),
+			  "d" (gsmi_dev.smi_cmd),
+			  "b" (gsmi_dev.param_buf->address),
+			  "c" (spincount)
+			: "memory", "cc"
+		);
+	} else {
+		/*
+		 * If handshake_type == HANDSHAKE_NONE we do nothing;
+		 * either we don't need to or it's legacy firmware that
+		 * doesn't understand the CF protocol.
+		 */
+		asm volatile (
+			"outb %%al, %%dx\n\t"
+			: "=a" (result)
+			: "0" (cmd),
+			  "d" (gsmi_dev.smi_cmd),
+			  "b" (gsmi_dev.param_buf->address)
+			: "memory", "cc"
+		);
+	}
+
+	/* check return code from SMI handler */
+	switch (result) {
+	case GSMI_SUCCESS:
+		break;
+	case GSMI_VAR_NOT_FOUND:
+		/* not really an error, but let the caller know */
+		rc = 1;
+		break;
+	case GSMI_INVALID_PARAMETER:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Invalid parameter\n", cmd);
+		rc = -EINVAL;
+		break;
+	case GSMI_BUFFER_TOO_SMALL:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Buffer too small\n", cmd);
+		rc = -ENOMEM;
+		break;
+	case GSMI_UNSUPPORTED:
+	case GSMI_UNSUPPORTED2:
+		if (sub != GSMI_CMD_HANDSHAKE_TYPE)
+			printk(KERN_ERR "gsmi: exec 0x%04x: Not supported\n",
+			       cmd);
+		rc = -ENOSYS;
+		break;
+	case GSMI_NOT_READY:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Not ready\n", cmd);
+		rc = -EBUSY;
+		break;
+	case GSMI_DEVICE_ERROR:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Device error\n", cmd);
+		rc = -EFAULT;
+		break;
+	case GSMI_NOT_FOUND:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Data not found\n", cmd);
+		rc = -ENOENT;
+		break;
+	case GSMI_LOG_FULL:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Log full\n", cmd);
+		rc = -ENOSPC;
+		break;
+	case GSMI_HANDSHAKE_CF:
+	case GSMI_HANDSHAKE_SPIN:
+	case GSMI_HANDSHAKE_NONE:
+		rc = result;
+		break;
+	default:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Unknown error 0x%04x\n",
+		       cmd, result);
+		rc = -ENXIO;
+	}
+
+	return rc;
+}
+
+/* Return the number of unicode characters in data */
+static size_t
+utf16_strlen(efi_char16_t *data, unsigned long maxlength)
+{
+	unsigned long length = 0;
+
+	while (*data++ != 0 && length < maxlength)
+		length++;
+	return length;
+}
+
+static efi_status_t gsmi_get_variable(efi_char16_t *name,
+				      efi_guid_t *vendor, u32 *attr,
+				      unsigned long *data_size,
+				      void *data)
+{
+	struct gsmi_nvram_var_param param = {
+		.name_ptr = gsmi_dev.name_buf->address,
+		.data_ptr = gsmi_dev.data_buf->address,
+		.data_len = (u32)*data_size,
+	};
+	efi_status_t ret = EFI_SUCCESS;
+	unsigned long flags;
+	size_t name_len = utf16_strlen(name, GSMI_BUF_SIZE / 2);
+	int rc;
+
+	if (name_len >= GSMI_BUF_SIZE / 2)
+		return EFI_BAD_BUFFER_SIZE;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	/* Vendor guid */
+	memcpy(&param.guid, vendor, sizeof(param.guid));
+
+	/* variable name, already in UTF-16 */
+	memset(gsmi_dev.name_buf->start, 0, gsmi_dev.name_buf->length);
+	memcpy(gsmi_dev.name_buf->start, name, name_len * 2);
+
+	/* data pointer */
+	memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
+
+	/* parameter buffer */
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+	memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_GET_NVRAM_VAR);
+	if (rc < 0) {
+		printk(KERN_ERR "gsmi: Get Variable failed\n");
+		ret = EFI_LOAD_ERROR;
+	} else if (rc == 1) {
+		/* variable was not found */
+		ret = EFI_NOT_FOUND;
+	} else {
+		/* Get the arguments back */
+		memcpy(&param, gsmi_dev.param_buf->start, sizeof(param));
+
+		/* The size reported is the min of all of our buffers */
+		*data_size = min(*data_size, gsmi_dev.data_buf->length);
+		*data_size = min_t(unsigned long, *data_size, param.data_len);
+
+		/* Copy data back to return buffer. */
+		memcpy(data, gsmi_dev.data_buf->start, *data_size);
+
+		/* All variables are have the following attributes */
+		*attr = EFI_VARIABLE_NON_VOLATILE |
+			EFI_VARIABLE_BOOTSERVICE_ACCESS |
+			EFI_VARIABLE_RUNTIME_ACCESS;
+	}
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	return ret;
+}
+
+static efi_status_t gsmi_get_next_variable(unsigned long *name_size,
+					   efi_char16_t *name,
+					   efi_guid_t *vendor)
+{
+	struct gsmi_get_next_var_param param = {
+		.name_ptr = gsmi_dev.name_buf->address,
+		.name_len = gsmi_dev.name_buf->length,
+	};
+	efi_status_t ret = EFI_SUCCESS;
+	int rc;
+	unsigned long flags;
+
+	/* For the moment, only support buffers that exactly match in size */
+	if (*name_size != GSMI_BUF_SIZE)
+		return EFI_BAD_BUFFER_SIZE;
+
+	/* Let's make sure the thing is at least null-terminated */
+	if (utf16_strlen(name, GSMI_BUF_SIZE / 2) == GSMI_BUF_SIZE / 2)
+		return EFI_INVALID_PARAMETER;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	/* guid */
+	memcpy(&param.guid, vendor, sizeof(param.guid));
+
+	/* variable name, already in UTF-16 */
+	memcpy(gsmi_dev.name_buf->start, name, *name_size);
+
+	/* parameter buffer */
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+	memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_GET_NEXT_VAR);
+	if (rc < 0) {
+		printk(KERN_ERR "gsmi: Get Next Variable Name failed\n");
+		ret = EFI_LOAD_ERROR;
+	} else if (rc == 1) {
+		/* variable not found -- end of list */
+		ret = EFI_NOT_FOUND;
+	} else {
+		/* copy variable data back to return buffer */
+		memcpy(&param, gsmi_dev.param_buf->start, sizeof(param));
+
+		/* Copy the name back */
+		memcpy(name, gsmi_dev.name_buf->start, GSMI_BUF_SIZE);
+		*name_size = utf16_strlen(name, GSMI_BUF_SIZE / 2) * 2;
+
+		/* copy guid to return buffer */
+		memcpy(vendor, &param.guid, sizeof(param.guid));
+		ret = EFI_SUCCESS;
+	}
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	return ret;
+}
+
+static efi_status_t gsmi_set_variable(efi_char16_t *name,
+				      efi_guid_t *vendor,
+				      unsigned long attr,
+				      unsigned long data_size,
+				      void *data)
+{
+	struct gsmi_nvram_var_param param = {
+		.name_ptr = gsmi_dev.name_buf->address,
+		.data_ptr = gsmi_dev.data_buf->address,
+		.data_len = (u32)data_size,
+		.attributes = EFI_VARIABLE_NON_VOLATILE |
+			      EFI_VARIABLE_BOOTSERVICE_ACCESS |
+			      EFI_VARIABLE_RUNTIME_ACCESS,
+	};
+	size_t name_len = utf16_strlen(name, GSMI_BUF_SIZE / 2);
+	efi_status_t ret = EFI_SUCCESS;
+	int rc;
+	unsigned long flags;
+
+	if (name_len >= GSMI_BUF_SIZE / 2)
+		return EFI_BAD_BUFFER_SIZE;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	/* guid */
+	memcpy(&param.guid, vendor, sizeof(param.guid));
+
+	/* variable name, already in UTF-16 */
+	memset(gsmi_dev.name_buf->start, 0, gsmi_dev.name_buf->length);
+	memcpy(gsmi_dev.name_buf->start, name, name_len * 2);
+
+	/* data pointer */
+	memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
+	memcpy(gsmi_dev.data_buf->start, data, data_size);
+
+	/* parameter buffer */
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+	memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_NVRAM_VAR);
+	if (rc < 0) {
+		printk(KERN_ERR "gsmi: Set Variable failed\n");
+		ret = EFI_INVALID_PARAMETER;
+	}
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	return ret;
+}
+
+static const struct efivar_operations efivar_ops = {
+	.get_variable = gsmi_get_variable,
+	.set_variable = gsmi_set_variable,
+	.get_next_variable = gsmi_get_next_variable,
+};
+
+static ssize_t eventlog_write(struct file *filp, struct kobject *kobj,
+			       struct bin_attribute *bin_attr,
+			       char *buf, loff_t pos, size_t count)
+{
+	struct gsmi_set_eventlog_param param = {
+		.data_ptr = gsmi_dev.data_buf->address,
+	};
+	int rc = 0;
+	unsigned long flags;
+
+	/* Pull the type out */
+	if (count < sizeof(u32))
+		return -EINVAL;
+	param.type = *(u32 *)buf;
+	count -= sizeof(u32);
+	buf += sizeof(u32);
+
+	/* The remaining buffer is the data payload */
+	if (count > gsmi_dev.data_buf->length)
+		return -EINVAL;
+	param.data_len = count - sizeof(u32);
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	/* data pointer */
+	memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
+	memcpy(gsmi_dev.data_buf->start, buf, param.data_len);
+
+	/* parameter buffer */
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+	memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_EVENT_LOG);
+	if (rc < 0)
+		printk(KERN_ERR "gsmi: Set Event Log failed\n");
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	return rc;
+
+}
+
+static struct bin_attribute eventlog_bin_attr = {
+	.attr = {.name = "append_to_eventlog", .mode = 0200},
+	.write = eventlog_write,
+};
+
+static ssize_t gsmi_clear_eventlog_store(struct kobject *kobj,
+					 struct kobj_attribute *attr,
+					 const char *buf, size_t count)
+{
+	int rc;
+	unsigned long flags;
+	unsigned long val;
+	struct {
+		u32 percentage;
+		u32 data_type;
+	} param;
+
+	rc = strict_strtoul(buf, 0, &val);
+	if (rc)
+		return rc;
+
+	/*
+	 * Value entered is a percentage, 0 through 100, anything else
+	 * is invalid.
+	 */
+	if (val > 100)
+		return -EINVAL;
+
+	/* data_type here selects the smbios event log. */
+	param.percentage = val;
+	param.data_type = 0;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	/* parameter buffer */
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+	memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_CLEAR_EVENT_LOG);
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	if (rc)
+		return rc;
+	return count;
+}
+
+static struct kobj_attribute gsmi_clear_eventlog_attr = {
+	.attr = {.name = "clear_eventlog", .mode = 0200},
+	.store = gsmi_clear_eventlog_store,
+};
+
+static ssize_t gsmi_clear_config_store(struct kobject *kobj,
+				       struct kobj_attribute *attr,
+				       const char *buf, size_t count)
+{
+	int rc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	/* clear parameter buffer */
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_CLEAR_CONFIG);
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	if (rc)
+		return rc;
+	return count;
+}
+
+static struct kobj_attribute gsmi_clear_config_attr = {
+	.attr = {.name = "clear_config", .mode = 0200},
+	.store = gsmi_clear_config_store,
+};
+
+static const struct attribute *gsmi_attrs[] = {
+	&gsmi_clear_config_attr.attr,
+	&gsmi_clear_eventlog_attr.attr,
+	NULL,
+};
+
+static int gsmi_shutdown_reason(int reason)
+{
+	struct gsmi_log_entry_type_1 entry = {
+		.type     = GSMI_LOG_ENTRY_TYPE_KERNEL,
+		.instance = reason,
+	};
+	struct gsmi_set_eventlog_param param = {
+		.data_len = sizeof(entry),
+		.type     = 1,
+	};
+	static int saved_reason;
+	int rc = 0;
+	unsigned long flags;
+
+	/* avoid duplicate entries in the log */
+	if (saved_reason & (1 << reason))
+		return 0;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	saved_reason |= (1 << reason);
+
+	/* data pointer */
+	memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
+	memcpy(gsmi_dev.data_buf->start, &entry, sizeof(entry));
+
+	/* parameter buffer */
+	param.data_ptr = gsmi_dev.data_buf->address;
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+	memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_EVENT_LOG);
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	if (rc < 0)
+		printk(KERN_ERR "gsmi: Log Shutdown Reason failed\n");
+	else
+		printk(KERN_EMERG "gsmi: Log Shutdown Reason 0x%02x\n",
+		       reason);
+
+	return rc;
+}
+
+static int gsmi_reboot_callback(struct notifier_block *nb,
+				unsigned long reason, void *arg)
+{
+	gsmi_shutdown_reason(GSMI_SHUTDOWN_CLEAN);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block gsmi_reboot_notifier = {
+	.notifier_call = gsmi_reboot_callback
+};
+
+static int gsmi_die_callback(struct notifier_block *nb,
+			     unsigned long reason, void *arg)
+{
+	if (reason == DIE_OOPS)
+		gsmi_shutdown_reason(GSMI_SHUTDOWN_OOPS);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block gsmi_die_notifier = {
+	.notifier_call = gsmi_die_callback
+};
+
+static int gsmi_panic_callback(struct notifier_block *nb,
+			       unsigned long reason, void *arg)
+{
+	gsmi_shutdown_reason(GSMI_SHUTDOWN_PANIC);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block gsmi_panic_notifier = {
+	.notifier_call = gsmi_panic_callback,
+};
+
+/*
+ * This hash function was blatantly copied from include/linux/hash.h.
+ * It is used by this driver to obfuscate a board name that requires a
+ * quirk within this driver.
+ *
+ * Please do not remove this copy of the function as any changes to the
+ * global utility hash_64() function would break this driver's ability
+ * to identify a board and provide the appropriate quirk -- mikew@google.com
+ */
+static u64 __init local_hash_64(u64 val, unsigned bits)
+{
+	u64 hash = val;
+
+	/*  Sigh, gcc can't optimise this alone like it does for 32 bits. */
+	u64 n = hash;
+	n <<= 18;
+	hash -= n;
+	n <<= 33;
+	hash -= n;
+	n <<= 3;
+	hash += n;
+	n <<= 3;
+	hash -= n;
+	n <<= 4;
+	hash += n;
+	n <<= 2;
+	hash += n;
+
+	/* High bits are more random, so use them. */
+	return hash >> (64 - bits);
+}
+
+static u32 __init hash_oem_table_id(char s[8])
+{
+	u64 input;
+	memcpy(&input, s, 8);
+	return local_hash_64(input, 32);
+}
+
+static struct dmi_system_id gsmi_dmi_table[] __initdata = {
+	{
+		.ident = "Google Board",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Google, Inc."),
+		},
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(dmi, gsmi_dmi_table);
+
+static __init int gsmi_system_valid(void)
+{
+	u32 hash;
+
+	if (!dmi_check_system(gsmi_dmi_table))
+		return -ENODEV;
+
+	/*
+	 * Only newer firmware supports the gsmi interface.  All older
+	 * firmware that didn't support this interface used to plug the
+	 * table name in the first four bytes of the oem_table_id field.
+	 * Newer firmware doesn't do that though, so use that as the
+	 * discriminant factor.  We have to do this in order to
+	 * whitewash our board names out of the public driver.
+	 */
+	if (!strncmp(acpi_gbl_FADT.header.oem_table_id, "FACP", 4)) {
+		printk(KERN_INFO "gsmi: Board is too old\n");
+		return -ENODEV;
+	}
+
+	/* Disable on board with 1.0 BIOS due to Google bug 2602657 */
+	hash = hash_oem_table_id(acpi_gbl_FADT.header.oem_table_id);
+	if (hash == QUIRKY_BOARD_HASH) {
+		const char *bios_ver = dmi_get_system_info(DMI_BIOS_VERSION);
+		if (strncmp(bios_ver, "1.0", 3) == 0) {
+			pr_info("gsmi: disabled on this board's BIOS %s\n",
+				bios_ver);
+			return -ENODEV;
+		}
+	}
+
+	/* check for valid SMI command port in ACPI FADT */
+	if (acpi_gbl_FADT.smi_command == 0) {
+		pr_info("gsmi: missing smi_command\n");
+		return -ENODEV;
+	}
+
+	/* Found */
+	return 0;
+}
+
+static struct kobject *gsmi_kobj;
+static struct efivars efivars;
+
+static __init int gsmi_init(void)
+{
+	unsigned long flags;
+	int ret;
+
+	ret = gsmi_system_valid();
+	if (ret)
+		return ret;
+
+	gsmi_dev.smi_cmd = acpi_gbl_FADT.smi_command;
+
+	/* register device */
+	gsmi_dev.pdev = platform_device_register_simple("gsmi", -1, NULL, 0);
+	if (IS_ERR(gsmi_dev.pdev)) {
+		printk(KERN_ERR "gsmi: unable to register platform device\n");
+		return PTR_ERR(gsmi_dev.pdev);
+	}
+
+	/* SMI access needs to be serialized */
+	spin_lock_init(&gsmi_dev.lock);
+
+	/* SMI callbacks require 32bit addresses */
+	gsmi_dev.pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+	gsmi_dev.pdev->dev.dma_mask =
+		&gsmi_dev.pdev->dev.coherent_dma_mask;
+	ret = -ENOMEM;
+	gsmi_dev.dma_pool = dma_pool_create("gsmi", &gsmi_dev.pdev->dev,
+					     GSMI_BUF_SIZE, GSMI_BUF_ALIGN, 0);
+	if (!gsmi_dev.dma_pool)
+		goto out_err;
+
+	/*
+	 * pre-allocate buffers because sometimes we are called when
+	 * this is not feasible: oops, panic, die, mce, etc
+	 */
+	gsmi_dev.name_buf = gsmi_buf_alloc();
+	if (!gsmi_dev.name_buf) {
+		printk(KERN_ERR "gsmi: failed to allocate name buffer\n");
+		goto out_err;
+	}
+
+	gsmi_dev.data_buf = gsmi_buf_alloc();
+	if (!gsmi_dev.data_buf) {
+		printk(KERN_ERR "gsmi: failed to allocate data buffer\n");
+		goto out_err;
+	}
+
+	gsmi_dev.param_buf = gsmi_buf_alloc();
+	if (!gsmi_dev.param_buf) {
+		printk(KERN_ERR "gsmi: failed to allocate param buffer\n");
+		goto out_err;
+	}
+
+	/*
+	 * Determine type of handshake used to serialize the SMI
+	 * entry. See also gsmi_exec().
+	 *
+	 * There's a "behavior" present on some chipsets where writing the
+	 * SMI trigger register in the southbridge doesn't result in an
+	 * immediate SMI. Rather, the processor can execute "a few" more
+	 * instructions before the SMI takes effect. To ensure synchronous
+	 * behavior, implement a handshake between the kernel driver and the
+	 * firmware handler to spin until released. This ioctl determines
+	 * the type of handshake.
+	 *
+	 * NONE: The firmware handler does not implement any
+	 * handshake. Either it doesn't need to, or it's legacy firmware
+	 * that doesn't know it needs to and never will.
+	 *
+	 * CF: The firmware handler will clear the CF in the saved
+	 * state before returning. The driver may set the CF and test for
+	 * it to clear before proceeding.
+	 *
+	 * SPIN: The firmware handler does not implement any handshake
+	 * but the driver should spin for a hundred or so microseconds
+	 * to ensure the SMI has triggered.
+	 *
+	 * Finally, the handler will return -ENOSYS if
+	 * GSMI_CMD_HANDSHAKE_TYPE is unimplemented, which implies
+	 * HANDSHAKE_NONE.
+	 */
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+	gsmi_dev.handshake_type = GSMI_HANDSHAKE_SPIN;
+	gsmi_dev.handshake_type =
+	    gsmi_exec(GSMI_CALLBACK, GSMI_CMD_HANDSHAKE_TYPE);
+	if (gsmi_dev.handshake_type == -ENOSYS)
+		gsmi_dev.handshake_type = GSMI_HANDSHAKE_NONE;
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	/* Remove and clean up gsmi if the handshake could not complete. */
+	if (gsmi_dev.handshake_type == -ENXIO) {
+		printk(KERN_INFO "gsmi version " DRIVER_VERSION
+		       " failed to load\n");
+		ret = -ENODEV;
+		goto out_err;
+	}
+
+	printk(KERN_INFO "gsmi version " DRIVER_VERSION " loaded\n");
+
+	/* Register in the firmware directory */
+	ret = -ENOMEM;
+	gsmi_kobj = kobject_create_and_add("gsmi", firmware_kobj);
+	if (!gsmi_kobj) {
+		printk(KERN_INFO "gsmi: Failed to create firmware kobj\n");
+		goto out_err;
+	}
+
+	/* Setup eventlog access */
+	ret = sysfs_create_bin_file(gsmi_kobj, &eventlog_bin_attr);
+	if (ret) {
+		printk(KERN_INFO "gsmi: Failed to setup eventlog");
+		goto out_err;
+	}
+
+	/* Other attributes */
+	ret = sysfs_create_files(gsmi_kobj, gsmi_attrs);
+	if (ret) {
+		printk(KERN_INFO "gsmi: Failed to add attrs");
+		goto out_err;
+	}
+
+	if (register_efivars(&efivars, &efivar_ops, gsmi_kobj)) {
+		printk(KERN_INFO "gsmi: Failed to register efivars\n");
+		goto out_err;
+	}
+
+	register_reboot_notifier(&gsmi_reboot_notifier);
+	register_die_notifier(&gsmi_die_notifier);
+	atomic_notifier_chain_register(&panic_notifier_list,
+				       &gsmi_panic_notifier);
+
+	return 0;
+
+ out_err:
+	kobject_put(gsmi_kobj);
+	gsmi_buf_free(gsmi_dev.param_buf);
+	gsmi_buf_free(gsmi_dev.data_buf);
+	gsmi_buf_free(gsmi_dev.name_buf);
+	if (gsmi_dev.dma_pool)
+		dma_pool_destroy(gsmi_dev.dma_pool);
+	platform_device_unregister(gsmi_dev.pdev);
+	pr_info("gsmi: failed to load: %d\n", ret);
+	return ret;
+}
+
+static void __exit gsmi_exit(void)
+{
+	unregister_reboot_notifier(&gsmi_reboot_notifier);
+	unregister_die_notifier(&gsmi_die_notifier);
+	atomic_notifier_chain_unregister(&panic_notifier_list,
+					 &gsmi_panic_notifier);
+	unregister_efivars(&efivars);
+
+	kobject_put(gsmi_kobj);
+	gsmi_buf_free(gsmi_dev.param_buf);
+	gsmi_buf_free(gsmi_dev.data_buf);
+	gsmi_buf_free(gsmi_dev.name_buf);
+	dma_pool_destroy(gsmi_dev.dma_pool);
+	platform_device_unregister(gsmi_dev.pdev);
+}
+
+module_init(gsmi_init);
+module_exit(gsmi_exit);
+
+MODULE_AUTHOR("Google, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/firmware/google/memconsole.c b/drivers/firmware/google/memconsole.c
new file mode 100644
index 00000000000..2a90ba61361
--- /dev/null
+++ b/drivers/firmware/google/memconsole.c
@@ -0,0 +1,166 @@
+/*
+ * memconsole.c
+ *
+ * Infrastructure for importing the BIOS memory based console
+ * into the kernel log ringbuffer.
+ *
+ * Copyright 2010 Google Inc. All rights reserved.
+ */
+
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/sysfs.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
+#include <linux/dmi.h>
+#include <asm/bios_ebda.h>
+
+#define BIOS_MEMCONSOLE_V1_MAGIC	0xDEADBABE
+#define BIOS_MEMCONSOLE_V2_MAGIC	(('M')|('C'<<8)|('O'<<16)|('N'<<24))
+
+struct biosmemcon_ebda {
+	u32 signature;
+	union {
+		struct {
+			u8  enabled;
+			u32 buffer_addr;
+			u16 start;
+			u16 end;
+			u16 num_chars;
+			u8  wrapped;
+		} __packed v1;
+		struct {
+			u32 buffer_addr;
+			/* Misdocumented as number of pages! */
+			u16 num_bytes;
+			u16 start;
+			u16 end;
+		} __packed v2;
+	};
+} __packed;
+
+static char *memconsole_baseaddr;
+static size_t memconsole_length;
+
+static ssize_t memconsole_read(struct file *filp, struct kobject *kobp,
+			       struct bin_attribute *bin_attr, char *buf,
+			       loff_t pos, size_t count)
+{
+	return memory_read_from_buffer(buf, count, &pos, memconsole_baseaddr,
+				       memconsole_length);
+}
+
+static struct bin_attribute memconsole_bin_attr = {
+	.attr = {.name = "log", .mode = 0444},
+	.read = memconsole_read,
+};
+
+
+static void found_v1_header(struct biosmemcon_ebda *hdr)
+{
+	printk(KERN_INFO "BIOS console v1 EBDA structure found at %p\n", hdr);
+	printk(KERN_INFO "BIOS console buffer at 0x%.8x, "
+	       "start = %d, end = %d, num = %d\n",
+	       hdr->v1.buffer_addr, hdr->v1.start,
+	       hdr->v1.end, hdr->v1.num_chars);
+
+	memconsole_length = hdr->v1.num_chars;
+	memconsole_baseaddr = phys_to_virt(hdr->v1.buffer_addr);
+}
+
+static void found_v2_header(struct biosmemcon_ebda *hdr)
+{
+	printk(KERN_INFO "BIOS console v2 EBDA structure found at %p\n", hdr);
+	printk(KERN_INFO "BIOS console buffer at 0x%.8x, "
+	       "start = %d, end = %d, num_bytes = %d\n",
+	       hdr->v2.buffer_addr, hdr->v2.start,
+	       hdr->v2.end, hdr->v2.num_bytes);
+
+	memconsole_length = hdr->v2.end - hdr->v2.start;
+	memconsole_baseaddr = phys_to_virt(hdr->v2.buffer_addr
+					   + hdr->v2.start);
+}
+
+/*
+ * Search through the EBDA for the BIOS Memory Console, and
+ * set the global variables to point to it.  Return true if found.
+ */
+static bool found_memconsole(void)
+{
+	unsigned int address;
+	size_t length, cur;
+
+	address = get_bios_ebda();
+	if (!address) {
+		printk(KERN_INFO "BIOS EBDA non-existent.\n");
+		return false;
+	}
+
+	/* EBDA length is byte 0 of EBDA (in KB) */
+	length = *(u8 *)phys_to_virt(address);
+	length <<= 10; /* convert to bytes */
+
+	/*
+	 * Search through EBDA for BIOS memory console structure
+	 * note: signature is not necessarily dword-aligned
+	 */
+	for (cur = 0; cur < length; cur++) {
+		struct biosmemcon_ebda *hdr = phys_to_virt(address + cur);
+
+		/* memconsole v1 */
+		if (hdr->signature == BIOS_MEMCONSOLE_V1_MAGIC) {
+			found_v1_header(hdr);
+			return true;
+		}
+
+		/* memconsole v2 */
+		if (hdr->signature == BIOS_MEMCONSOLE_V2_MAGIC) {
+			found_v2_header(hdr);
+			return true;
+		}
+	}
+
+	printk(KERN_INFO "BIOS console EBDA structure not found!\n");
+	return false;
+}
+
+static struct dmi_system_id memconsole_dmi_table[] __initdata = {
+	{
+		.ident = "Google Board",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Google, Inc."),
+		},
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(dmi, memconsole_dmi_table);
+
+static int __init memconsole_init(void)
+{
+	int ret;
+
+	if (!dmi_check_system(memconsole_dmi_table))
+		return -ENODEV;
+
+	if (!found_memconsole())
+		return -ENODEV;
+
+	memconsole_bin_attr.size = memconsole_length;
+
+	ret = sysfs_create_bin_file(firmware_kobj, &memconsole_bin_attr);
+
+	return ret;
+}
+
+static void __exit memconsole_exit(void)
+{
+	sysfs_remove_bin_file(firmware_kobj, &memconsole_bin_attr);
+}
+
+module_init(memconsole_init);
+module_exit(memconsole_exit);
+
+MODULE_AUTHOR("Google, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c
index 2192456dfd6..f032e446fc1 100644
--- a/drivers/firmware/iscsi_ibft_find.c
+++ b/drivers/firmware/iscsi_ibft_find.c
@@ -42,7 +42,20 @@
 struct acpi_table_ibft *ibft_addr;
 EXPORT_SYMBOL_GPL(ibft_addr);
 
-#define IBFT_SIGN "iBFT"
+static const struct {
+	char *sign;
+} ibft_signs[] = {
+#ifdef CONFIG_ACPI
+	/*
+	 * One spec says "IBFT", the other says "iBFT". We have to check
+	 * for both.
+	 */
+	{ ACPI_SIG_IBFT },
+#endif
+	{ "iBFT" },
+	{ "BIFT" },	/* Broadcom iSCSI Offload */
+};
+
 #define IBFT_SIGN_LEN 4
 #define IBFT_START 0x80000 /* 512kB */
 #define IBFT_END 0x100000 /* 1MB */
@@ -62,6 +75,7 @@ static int __init find_ibft_in_mem(void)
 	unsigned long pos;
 	unsigned int len = 0;
 	void *virt;
+	int i;
 
 	for (pos = IBFT_START; pos < IBFT_END; pos += 16) {
 		/* The table can't be inside the VGA BIOS reserved space,
@@ -69,18 +83,23 @@ static int __init find_ibft_in_mem(void)
 		if (pos == VGA_MEM)
 			pos += VGA_SIZE;
 		virt = isa_bus_to_virt(pos);
-		if (memcmp(virt, IBFT_SIGN, IBFT_SIGN_LEN) == 0) {
-			unsigned long *addr =
-			    (unsigned long *)isa_bus_to_virt(pos + 4);
-			len = *addr;
-			/* if the length of the table extends past 1M,
-			 * the table cannot be valid. */
-			if (pos + len <= (IBFT_END-1)) {
-				ibft_addr = (struct acpi_table_ibft *)virt;
-				break;
+
+		for (i = 0; i < ARRAY_SIZE(ibft_signs); i++) {
+			if (memcmp(virt, ibft_signs[i].sign, IBFT_SIGN_LEN) ==
+			    0) {
+				unsigned long *addr =
+				    (unsigned long *)isa_bus_to_virt(pos + 4);
+				len = *addr;
+				/* if the length of the table extends past 1M,
+				 * the table cannot be valid. */
+				if (pos + len <= (IBFT_END-1)) {
+					ibft_addr = (struct acpi_table_ibft *)virt;
+					goto done;
+				}
 			}
 		}
 	}
+done:
 	return len;
 }
 /*
@@ -89,18 +108,12 @@ static int __init find_ibft_in_mem(void)
  */
 unsigned long __init find_ibft_region(unsigned long *sizep)
 {
-
+	int i;
 	ibft_addr = NULL;
 
 #ifdef CONFIG_ACPI
-	/*
-	 * One spec says "IBFT", the other says "iBFT". We have to check
-	 * for both.
-	 */
-	if (!ibft_addr)
-		acpi_table_parse(ACPI_SIG_IBFT, acpi_find_ibft);
-	if (!ibft_addr)
-		acpi_table_parse(IBFT_SIGN, acpi_find_ibft);
+	for (i = 0; i < ARRAY_SIZE(ibft_signs) && !ibft_addr; i++)
+		acpi_table_parse(ibft_signs[i].sign, acpi_find_ibft);
 #endif /* CONFIG_ACPI */
 
 	/* iBFT 1.03 section 1.4.3.1 mandates that UEFI machines will
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 5ed9d25d021..99dde874fbb 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -148,6 +148,7 @@ struct rdma_id_private {
 	u32			qp_num;
 	u8			srq;
 	u8			tos;
+	u8			reuseaddr;
 };
 
 struct cma_multicast {
@@ -712,6 +713,21 @@ static inline int cma_any_addr(struct sockaddr *addr)
 	return cma_zero_addr(addr) || cma_loopback_addr(addr);
 }
 
+static int cma_addr_cmp(struct sockaddr *src, struct sockaddr *dst)
+{
+	if (src->sa_family != dst->sa_family)
+		return -1;
+
+	switch (src->sa_family) {
+	case AF_INET:
+		return ((struct sockaddr_in *) src)->sin_addr.s_addr !=
+		       ((struct sockaddr_in *) dst)->sin_addr.s_addr;
+	default:
+		return ipv6_addr_cmp(&((struct sockaddr_in6 *) src)->sin6_addr,
+				     &((struct sockaddr_in6 *) dst)->sin6_addr);
+	}
+}
+
 static inline __be16 cma_port(struct sockaddr *addr)
 {
 	if (addr->sa_family == AF_INET)
@@ -1564,50 +1580,6 @@ static void cma_listen_on_all(struct rdma_id_private *id_priv)
 	mutex_unlock(&lock);
 }
 
-int rdma_listen(struct rdma_cm_id *id, int backlog)
-{
-	struct rdma_id_private *id_priv;
-	int ret;
-
-	id_priv = container_of(id, struct rdma_id_private, id);
-	if (id_priv->state == CMA_IDLE) {
-		((struct sockaddr *) &id->route.addr.src_addr)->sa_family = AF_INET;
-		ret = rdma_bind_addr(id, (struct sockaddr *) &id->route.addr.src_addr);
-		if (ret)
-			return ret;
-	}
-
-	if (!cma_comp_exch(id_priv, CMA_ADDR_BOUND, CMA_LISTEN))
-		return -EINVAL;
-
-	id_priv->backlog = backlog;
-	if (id->device) {
-		switch (rdma_node_get_transport(id->device->node_type)) {
-		case RDMA_TRANSPORT_IB:
-			ret = cma_ib_listen(id_priv);
-			if (ret)
-				goto err;
-			break;
-		case RDMA_TRANSPORT_IWARP:
-			ret = cma_iw_listen(id_priv, backlog);
-			if (ret)
-				goto err;
-			break;
-		default:
-			ret = -ENOSYS;
-			goto err;
-		}
-	} else
-		cma_listen_on_all(id_priv);
-
-	return 0;
-err:
-	id_priv->backlog = 0;
-	cma_comp_exch(id_priv, CMA_LISTEN, CMA_ADDR_BOUND);
-	return ret;
-}
-EXPORT_SYMBOL(rdma_listen);
-
 void rdma_set_service_type(struct rdma_cm_id *id, int tos)
 {
 	struct rdma_id_private *id_priv;
@@ -2090,6 +2062,25 @@ err:
 }
 EXPORT_SYMBOL(rdma_resolve_addr);
 
+int rdma_set_reuseaddr(struct rdma_cm_id *id, int reuse)
+{
+	struct rdma_id_private *id_priv;
+	unsigned long flags;
+	int ret;
+
+	id_priv = container_of(id, struct rdma_id_private, id);
+	spin_lock_irqsave(&id_priv->lock, flags);
+	if (id_priv->state == CMA_IDLE) {
+		id_priv->reuseaddr = reuse;
+		ret = 0;
+	} else {
+		ret = -EINVAL;
+	}
+	spin_unlock_irqrestore(&id_priv->lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL(rdma_set_reuseaddr);
+
 static void cma_bind_port(struct rdma_bind_list *bind_list,
 			  struct rdma_id_private *id_priv)
 {
@@ -2165,41 +2156,71 @@ retry:
 	return -EADDRNOTAVAIL;
 }
 
-static int cma_use_port(struct idr *ps, struct rdma_id_private *id_priv)
+/*
+ * Check that the requested port is available.  This is called when trying to
+ * bind to a specific port, or when trying to listen on a bound port.  In
+ * the latter case, the provided id_priv may already be on the bind_list, but
+ * we still need to check that it's okay to start listening.
+ */
+static int cma_check_port(struct rdma_bind_list *bind_list,
+			  struct rdma_id_private *id_priv, uint8_t reuseaddr)
 {
 	struct rdma_id_private *cur_id;
-	struct sockaddr_in *sin, *cur_sin;
-	struct rdma_bind_list *bind_list;
+	struct sockaddr *addr, *cur_addr;
 	struct hlist_node *node;
+
+	addr = (struct sockaddr *) &id_priv->id.route.addr.src_addr;
+	if (cma_any_addr(addr) && !reuseaddr)
+		return -EADDRNOTAVAIL;
+
+	hlist_for_each_entry(cur_id, node, &bind_list->owners, node) {
+		if (id_priv == cur_id)
+			continue;
+
+		if ((cur_id->state == CMA_LISTEN) ||
+		    !reuseaddr || !cur_id->reuseaddr) {
+			cur_addr = (struct sockaddr *) &cur_id->id.route.addr.src_addr;
+			if (cma_any_addr(cur_addr))
+				return -EADDRNOTAVAIL;
+
+			if (!cma_addr_cmp(addr, cur_addr))
+				return -EADDRINUSE;
+		}
+	}
+	return 0;
+}
+
+static int cma_use_port(struct idr *ps, struct rdma_id_private *id_priv)
+{
+	struct rdma_bind_list *bind_list;
 	unsigned short snum;
+	int ret;
 
-	sin = (struct sockaddr_in *) &id_priv->id.route.addr.src_addr;
-	snum = ntohs(sin->sin_port);
+	snum = ntohs(cma_port((struct sockaddr *) &id_priv->id.route.addr.src_addr));
 	if (snum < PROT_SOCK && !capable(CAP_NET_BIND_SERVICE))
 		return -EACCES;
 
 	bind_list = idr_find(ps, snum);
-	if (!bind_list)
-		return cma_alloc_port(ps, id_priv, snum);
-
-	/*
-	 * We don't support binding to any address if anyone is bound to
-	 * a specific address on the same port.
-	 */
-	if (cma_any_addr((struct sockaddr *) &id_priv->id.route.addr.src_addr))
-		return -EADDRNOTAVAIL;
-
-	hlist_for_each_entry(cur_id, node, &bind_list->owners, node) {
-		if (cma_any_addr((struct sockaddr *) &cur_id->id.route.addr.src_addr))
-			return -EADDRNOTAVAIL;
-
-		cur_sin = (struct sockaddr_in *) &cur_id->id.route.addr.src_addr;
-		if (sin->sin_addr.s_addr == cur_sin->sin_addr.s_addr)
-			return -EADDRINUSE;
+	if (!bind_list) {
+		ret = cma_alloc_port(ps, id_priv, snum);
+	} else {
+		ret = cma_check_port(bind_list, id_priv, id_priv->reuseaddr);
+		if (!ret)
+			cma_bind_port(bind_list, id_priv);
 	}
+	return ret;
+}
 
-	cma_bind_port(bind_list, id_priv);
-	return 0;
+static int cma_bind_listen(struct rdma_id_private *id_priv)
+{
+	struct rdma_bind_list *bind_list = id_priv->bind_list;
+	int ret = 0;
+
+	mutex_lock(&lock);
+	if (bind_list->owners.first->next)
+		ret = cma_check_port(bind_list, id_priv, 0);
+	mutex_unlock(&lock);
+	return ret;
 }
 
 static int cma_get_port(struct rdma_id_private *id_priv)
@@ -2253,6 +2274,56 @@ static int cma_check_linklocal(struct rdma_dev_addr *dev_addr,
 	return 0;
 }
 
+int rdma_listen(struct rdma_cm_id *id, int backlog)
+{
+	struct rdma_id_private *id_priv;
+	int ret;
+
+	id_priv = container_of(id, struct rdma_id_private, id);
+	if (id_priv->state == CMA_IDLE) {
+		((struct sockaddr *) &id->route.addr.src_addr)->sa_family = AF_INET;
+		ret = rdma_bind_addr(id, (struct sockaddr *) &id->route.addr.src_addr);
+		if (ret)
+			return ret;
+	}
+
+	if (!cma_comp_exch(id_priv, CMA_ADDR_BOUND, CMA_LISTEN))
+		return -EINVAL;
+
+	if (id_priv->reuseaddr) {
+		ret = cma_bind_listen(id_priv);
+		if (ret)
+			goto err;
+	}
+
+	id_priv->backlog = backlog;
+	if (id->device) {
+		switch (rdma_node_get_transport(id->device->node_type)) {
+		case RDMA_TRANSPORT_IB:
+			ret = cma_ib_listen(id_priv);
+			if (ret)
+				goto err;
+			break;
+		case RDMA_TRANSPORT_IWARP:
+			ret = cma_iw_listen(id_priv, backlog);
+			if (ret)
+				goto err;
+			break;
+		default:
+			ret = -ENOSYS;
+			goto err;
+		}
+	} else
+		cma_listen_on_all(id_priv);
+
+	return 0;
+err:
+	id_priv->backlog = 0;
+	cma_comp_exch(id_priv, CMA_LISTEN, CMA_ADDR_BOUND);
+	return ret;
+}
+EXPORT_SYMBOL(rdma_listen);
+
 int rdma_bind_addr(struct rdma_cm_id *id, struct sockaddr *addr)
 {
 	struct rdma_id_private *id_priv;
diff --git a/drivers/infiniband/core/iwcm.c b/drivers/infiniband/core/iwcm.c
index 2a1e9ae134b..a9c042345c6 100644
--- a/drivers/infiniband/core/iwcm.c
+++ b/drivers/infiniband/core/iwcm.c
@@ -725,7 +725,7 @@ static int cm_conn_rep_handler(struct iwcm_id_private *cm_id_priv,
 	 */
 	clear_bit(IWCM_F_CONNECT_WAIT, &cm_id_priv->flags);
 	BUG_ON(cm_id_priv->state != IW_CM_STATE_CONN_SENT);
-	if (iw_event->status == IW_CM_EVENT_STATUS_ACCEPTED) {
+	if (iw_event->status == 0) {
 		cm_id_priv->id.local_addr = iw_event->local_addr;
 		cm_id_priv->id.remote_addr = iw_event->remote_addr;
 		cm_id_priv->state = IW_CM_STATE_ESTABLISHED;
diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c
index ec1e9da1488..b3fa798525b 100644
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -883,6 +883,13 @@ static int ucma_set_option_id(struct ucma_context *ctx, int optname,
 		}
 		rdma_set_service_type(ctx->cm_id, *((u8 *) optval));
 		break;
+	case RDMA_OPTION_ID_REUSEADDR:
+		if (optlen != sizeof(int)) {
+			ret = -EINVAL;
+			break;
+		}
+		ret = rdma_set_reuseaddr(ctx->cm_id, *((int *) optval) ? 1 : 0);
+		break;
 	default:
 		ret = -ENOSYS;
 	}
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index 9d8dcfab2b3..d7ee70fc917 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -1198,9 +1198,7 @@ static int pass_open_rpl(struct c4iw_dev *dev, struct sk_buff *skb)
 	}
 	PDBG("%s ep %p status %d error %d\n", __func__, ep,
 	     rpl->status, status2errno(rpl->status));
-	ep->com.wr_wait.ret = status2errno(rpl->status);
-	ep->com.wr_wait.done = 1;
-	wake_up(&ep->com.wr_wait.wait);
+	c4iw_wake_up(&ep->com.wr_wait, status2errno(rpl->status));
 
 	return 0;
 }
@@ -1234,9 +1232,7 @@ static int close_listsrv_rpl(struct c4iw_dev *dev, struct sk_buff *skb)
 	struct c4iw_listen_ep *ep = lookup_stid(t, stid);
 
 	PDBG("%s ep %p\n", __func__, ep);
-	ep->com.wr_wait.ret = status2errno(rpl->status);
-	ep->com.wr_wait.done = 1;
-	wake_up(&ep->com.wr_wait.wait);
+	c4iw_wake_up(&ep->com.wr_wait, status2errno(rpl->status));
 	return 0;
 }
 
@@ -1466,7 +1462,7 @@ static int peer_close(struct c4iw_dev *dev, struct sk_buff *skb)
 	struct c4iw_qp_attributes attrs;
 	int disconnect = 1;
 	int release = 0;
-	int closing = 0;
+	int abort = 0;
 	struct tid_info *t = dev->rdev.lldi.tids;
 	unsigned int tid = GET_TID(hdr);
 
@@ -1492,23 +1488,22 @@ static int peer_close(struct c4iw_dev *dev, struct sk_buff *skb)
 		 * in rdma connection migration (see c4iw_accept_cr()).
 		 */
 		__state_set(&ep->com, CLOSING);
-		ep->com.wr_wait.done = 1;
-		ep->com.wr_wait.ret = -ECONNRESET;
 		PDBG("waking up ep %p tid %u\n", ep, ep->hwtid);
-		wake_up(&ep->com.wr_wait.wait);
+		c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET);
 		break;
 	case MPA_REP_SENT:
 		__state_set(&ep->com, CLOSING);
-		ep->com.wr_wait.done = 1;
-		ep->com.wr_wait.ret = -ECONNRESET;
 		PDBG("waking up ep %p tid %u\n", ep, ep->hwtid);
-		wake_up(&ep->com.wr_wait.wait);
+		c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET);
 		break;
 	case FPDU_MODE:
 		start_ep_timer(ep);
 		__state_set(&ep->com, CLOSING);
-		closing = 1;
+		attrs.next_state = C4IW_QP_STATE_CLOSING;
+		abort = c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
+				       C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
 		peer_close_upcall(ep);
+		disconnect = 1;
 		break;
 	case ABORTING:
 		disconnect = 0;
@@ -1536,11 +1531,6 @@ static int peer_close(struct c4iw_dev *dev, struct sk_buff *skb)
 		BUG_ON(1);
 	}
 	mutex_unlock(&ep->com.mutex);
-	if (closing) {
-		attrs.next_state = C4IW_QP_STATE_CLOSING;
-		c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
-			       C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
-	}
 	if (disconnect)
 		c4iw_ep_disconnect(ep, 0, GFP_KERNEL);
 	if (release)
@@ -1581,9 +1571,7 @@ static int peer_abort(struct c4iw_dev *dev, struct sk_buff *skb)
 	/*
 	 * Wake up any threads in rdma_init() or rdma_fini().
 	 */
-	ep->com.wr_wait.done = 1;
-	ep->com.wr_wait.ret = -ECONNRESET;
-	wake_up(&ep->com.wr_wait.wait);
+	c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET);
 
 	mutex_lock(&ep->com.mutex);
 	switch (ep->com.state) {
@@ -1710,14 +1698,14 @@ static int terminate(struct c4iw_dev *dev, struct sk_buff *skb)
 	ep = lookup_tid(t, tid);
 	BUG_ON(!ep);
 
-	if (ep->com.qp) {
+	if (ep && ep->com.qp) {
 		printk(KERN_WARNING MOD "TERM received tid %u qpid %u\n", tid,
 		       ep->com.qp->wq.sq.qid);
 		attrs.next_state = C4IW_QP_STATE_TERMINATE;
 		c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
 			       C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
 	} else
-		printk(KERN_WARNING MOD "TERM received tid %u no qp\n", tid);
+		printk(KERN_WARNING MOD "TERM received tid %u no ep/qp\n", tid);
 
 	return 0;
 }
@@ -2296,14 +2284,8 @@ static int fw6_msg(struct c4iw_dev *dev, struct sk_buff *skb)
 		ret = (int)((be64_to_cpu(rpl->data[0]) >> 8) & 0xff);
 		wr_waitp = (struct c4iw_wr_wait *)(__force unsigned long) rpl->data[1];
 		PDBG("%s wr_waitp %p ret %u\n", __func__, wr_waitp, ret);
-		if (wr_waitp) {
-			if (ret)
-				wr_waitp->ret = -ret;
-			else
-				wr_waitp->ret = 0;
-			wr_waitp->done = 1;
-			wake_up(&wr_waitp->wait);
-		}
+		if (wr_waitp)
+			c4iw_wake_up(wr_waitp, ret ? -ret : 0);
 		kfree_skb(skb);
 		break;
 	case 2:
diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c
index e29172c2afc..40a13cc633a 100644
--- a/drivers/infiniband/hw/cxgb4/device.c
+++ b/drivers/infiniband/hw/cxgb4/device.c
@@ -44,7 +44,7 @@ MODULE_DESCRIPTION("Chelsio T4 RDMA Driver");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_VERSION(DRV_VERSION);
 
-static LIST_HEAD(dev_list);
+static LIST_HEAD(uld_ctx_list);
 static DEFINE_MUTEX(dev_mutex);
 
 static struct dentry *c4iw_debugfs_root;
@@ -370,18 +370,23 @@ static void c4iw_rdev_close(struct c4iw_rdev *rdev)
 	c4iw_destroy_resource(&rdev->resource);
 }
 
-static void c4iw_remove(struct c4iw_dev *dev)
+struct uld_ctx {
+	struct list_head entry;
+	struct cxgb4_lld_info lldi;
+	struct c4iw_dev *dev;
+};
+
+static void c4iw_remove(struct uld_ctx *ctx)
 {
-	PDBG("%s c4iw_dev %p\n", __func__,  dev);
-	list_del(&dev->entry);
-	if (dev->registered)
-		c4iw_unregister_device(dev);
-	c4iw_rdev_close(&dev->rdev);
-	idr_destroy(&dev->cqidr);
-	idr_destroy(&dev->qpidr);
-	idr_destroy(&dev->mmidr);
-	iounmap(dev->rdev.oc_mw_kva);
-	ib_dealloc_device(&dev->ibdev);
+	PDBG("%s c4iw_dev %p\n", __func__,  ctx->dev);
+	c4iw_unregister_device(ctx->dev);
+	c4iw_rdev_close(&ctx->dev->rdev);
+	idr_destroy(&ctx->dev->cqidr);
+	idr_destroy(&ctx->dev->qpidr);
+	idr_destroy(&ctx->dev->mmidr);
+	iounmap(ctx->dev->rdev.oc_mw_kva);
+	ib_dealloc_device(&ctx->dev->ibdev);
+	ctx->dev = NULL;
 }
 
 static struct c4iw_dev *c4iw_alloc(const struct cxgb4_lld_info *infop)
@@ -392,7 +397,7 @@ static struct c4iw_dev *c4iw_alloc(const struct cxgb4_lld_info *infop)
 	devp = (struct c4iw_dev *)ib_alloc_device(sizeof(*devp));
 	if (!devp) {
 		printk(KERN_ERR MOD "Cannot allocate ib device\n");
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 	}
 	devp->rdev.lldi = *infop;
 
@@ -402,27 +407,23 @@ static struct c4iw_dev *c4iw_alloc(const struct cxgb4_lld_info *infop)
 	devp->rdev.oc_mw_kva = ioremap_wc(devp->rdev.oc_mw_pa,
 					       devp->rdev.lldi.vr->ocq.size);
 
-	printk(KERN_INFO MOD "ocq memory: "
+	PDBG(KERN_INFO MOD "ocq memory: "
 	       "hw_start 0x%x size %u mw_pa 0x%lx mw_kva %p\n",
 	       devp->rdev.lldi.vr->ocq.start, devp->rdev.lldi.vr->ocq.size,
 	       devp->rdev.oc_mw_pa, devp->rdev.oc_mw_kva);
 
-	mutex_lock(&dev_mutex);
-
 	ret = c4iw_rdev_open(&devp->rdev);
 	if (ret) {
 		mutex_unlock(&dev_mutex);
 		printk(KERN_ERR MOD "Unable to open CXIO rdev err %d\n", ret);
 		ib_dealloc_device(&devp->ibdev);
-		return NULL;
+		return ERR_PTR(ret);
 	}
 
 	idr_init(&devp->cqidr);
 	idr_init(&devp->qpidr);
 	idr_init(&devp->mmidr);
 	spin_lock_init(&devp->lock);
-	list_add_tail(&devp->entry, &dev_list);
-	mutex_unlock(&dev_mutex);
 
 	if (c4iw_debugfs_root) {
 		devp->debugfs_root = debugfs_create_dir(
@@ -435,7 +436,7 @@ static struct c4iw_dev *c4iw_alloc(const struct cxgb4_lld_info *infop)
 
 static void *c4iw_uld_add(const struct cxgb4_lld_info *infop)
 {
-	struct c4iw_dev *dev;
+	struct uld_ctx *ctx;
 	static int vers_printed;
 	int i;
 
@@ -443,25 +444,33 @@ static void *c4iw_uld_add(const struct cxgb4_lld_info *infop)
 		printk(KERN_INFO MOD "Chelsio T4 RDMA Driver - version %s\n",
 		       DRV_VERSION);
 
-	dev = c4iw_alloc(infop);
-	if (!dev)
+	ctx = kzalloc(sizeof *ctx, GFP_KERNEL);
+	if (!ctx) {
+		ctx = ERR_PTR(-ENOMEM);
 		goto out;
+	}
+	ctx->lldi = *infop;
 
 	PDBG("%s found device %s nchan %u nrxq %u ntxq %u nports %u\n",
-	     __func__, pci_name(dev->rdev.lldi.pdev),
-	     dev->rdev.lldi.nchan, dev->rdev.lldi.nrxq,
-	     dev->rdev.lldi.ntxq, dev->rdev.lldi.nports);
+	     __func__, pci_name(ctx->lldi.pdev),
+	     ctx->lldi.nchan, ctx->lldi.nrxq,
+	     ctx->lldi.ntxq, ctx->lldi.nports);
+
+	mutex_lock(&dev_mutex);
+	list_add_tail(&ctx->entry, &uld_ctx_list);
+	mutex_unlock(&dev_mutex);
 
-	for (i = 0; i < dev->rdev.lldi.nrxq; i++)
-		PDBG("rxqid[%u] %u\n", i, dev->rdev.lldi.rxq_ids[i]);
+	for (i = 0; i < ctx->lldi.nrxq; i++)
+		PDBG("rxqid[%u] %u\n", i, ctx->lldi.rxq_ids[i]);
 out:
-	return dev;
+	return ctx;
 }
 
 static int c4iw_uld_rx_handler(void *handle, const __be64 *rsp,
 			const struct pkt_gl *gl)
 {
-	struct c4iw_dev *dev = handle;
+	struct uld_ctx *ctx = handle;
+	struct c4iw_dev *dev = ctx->dev;
 	struct sk_buff *skb;
 	const struct cpl_act_establish *rpl;
 	unsigned int opcode;
@@ -503,47 +512,49 @@ nomem:
 
 static int c4iw_uld_state_change(void *handle, enum cxgb4_state new_state)
 {
-	struct c4iw_dev *dev = handle;
+	struct uld_ctx *ctx = handle;
 
 	PDBG("%s new_state %u\n", __func__, new_state);
 	switch (new_state) {
 	case CXGB4_STATE_UP:
-		printk(KERN_INFO MOD "%s: Up\n", pci_name(dev->rdev.lldi.pdev));
-		if (!dev->registered) {
-			int ret;
-			ret = c4iw_register_device(dev);
-			if (ret)
+		printk(KERN_INFO MOD "%s: Up\n", pci_name(ctx->lldi.pdev));
+		if (!ctx->dev) {
+			int ret = 0;
+
+			ctx->dev = c4iw_alloc(&ctx->lldi);
+			if (!IS_ERR(ctx->dev))
+				ret = c4iw_register_device(ctx->dev);
+			if (IS_ERR(ctx->dev) || ret)
 				printk(KERN_ERR MOD
 				       "%s: RDMA registration failed: %d\n",
-				       pci_name(dev->rdev.lldi.pdev), ret);
+				       pci_name(ctx->lldi.pdev), ret);
 		}
 		break;
 	case CXGB4_STATE_DOWN:
 		printk(KERN_INFO MOD "%s: Down\n",
-		       pci_name(dev->rdev.lldi.pdev));
-		if (dev->registered)
-			c4iw_unregister_device(dev);
+		       pci_name(ctx->lldi.pdev));
+		if (ctx->dev)
+			c4iw_remove(ctx);
 		break;
 	case CXGB4_STATE_START_RECOVERY:
 		printk(KERN_INFO MOD "%s: Fatal Error\n",
-		       pci_name(dev->rdev.lldi.pdev));
-		dev->rdev.flags |= T4_FATAL_ERROR;
-		if (dev->registered) {
+		       pci_name(ctx->lldi.pdev));
+		if (ctx->dev) {
 			struct ib_event event;
 
+			ctx->dev->rdev.flags |= T4_FATAL_ERROR;
 			memset(&event, 0, sizeof event);
 			event.event  = IB_EVENT_DEVICE_FATAL;
-			event.device = &dev->ibdev;
+			event.device = &ctx->dev->ibdev;
 			ib_dispatch_event(&event);
-			c4iw_unregister_device(dev);
+			c4iw_remove(ctx);
 		}
 		break;
 	case CXGB4_STATE_DETACH:
 		printk(KERN_INFO MOD "%s: Detach\n",
-		       pci_name(dev->rdev.lldi.pdev));
-		mutex_lock(&dev_mutex);
-		c4iw_remove(dev);
-		mutex_unlock(&dev_mutex);
+		       pci_name(ctx->lldi.pdev));
+		if (ctx->dev)
+			c4iw_remove(ctx);
 		break;
 	}
 	return 0;
@@ -576,11 +587,13 @@ static int __init c4iw_init_module(void)
 
 static void __exit c4iw_exit_module(void)
 {
-	struct c4iw_dev *dev, *tmp;
+	struct uld_ctx *ctx, *tmp;
 
 	mutex_lock(&dev_mutex);
-	list_for_each_entry_safe(dev, tmp, &dev_list, entry) {
-		c4iw_remove(dev);
+	list_for_each_entry_safe(ctx, tmp, &uld_ctx_list, entry) {
+		if (ctx->dev)
+			c4iw_remove(ctx);
+		kfree(ctx);
 	}
 	mutex_unlock(&dev_mutex);
 	cxgb4_unregister_uld(CXGB4_ULD_RDMA);
diff --git a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
index 9f6166f5926..35d2a5dd9bb 100644
--- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
+++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
@@ -131,42 +131,58 @@ static inline int c4iw_num_stags(struct c4iw_rdev *rdev)
 
 #define C4IW_WR_TO (10*HZ)
 
+enum {
+	REPLY_READY = 0,
+};
+
 struct c4iw_wr_wait {
 	wait_queue_head_t wait;
-	int done;
+	unsigned long status;
 	int ret;
 };
 
 static inline void c4iw_init_wr_wait(struct c4iw_wr_wait *wr_waitp)
 {
 	wr_waitp->ret = 0;
-	wr_waitp->done = 0;
+	wr_waitp->status = 0;
 	init_waitqueue_head(&wr_waitp->wait);
 }
 
+static inline void c4iw_wake_up(struct c4iw_wr_wait *wr_waitp, int ret)
+{
+	wr_waitp->ret = ret;
+	set_bit(REPLY_READY, &wr_waitp->status);
+	wake_up(&wr_waitp->wait);
+}
+
 static inline int c4iw_wait_for_reply(struct c4iw_rdev *rdev,
 				 struct c4iw_wr_wait *wr_waitp,
 				 u32 hwtid, u32 qpid,
 				 const char *func)
 {
 	unsigned to = C4IW_WR_TO;
-	do {
+	int ret;
 
-		wait_event_timeout(wr_waitp->wait, wr_waitp->done, to);
-		if (!wr_waitp->done) {
+	do {
+		ret = wait_event_timeout(wr_waitp->wait,
+			test_and_clear_bit(REPLY_READY, &wr_waitp->status), to);
+		if (!ret) {
 			printk(KERN_ERR MOD "%s - Device %s not responding - "
 			       "tid %u qpid %u\n", func,
 			       pci_name(rdev->lldi.pdev), hwtid, qpid);
+			if (c4iw_fatal_error(rdev)) {
+				wr_waitp->ret = -EIO;
+				break;
+			}
 			to = to << 2;
 		}
-	} while (!wr_waitp->done);
+	} while (!ret);
 	if (wr_waitp->ret)
-		printk(KERN_WARNING MOD "%s: FW reply %d tid %u qpid %u\n",
-		       pci_name(rdev->lldi.pdev), wr_waitp->ret, hwtid, qpid);
+		PDBG("%s: FW reply %d tid %u qpid %u\n",
+		     pci_name(rdev->lldi.pdev), wr_waitp->ret, hwtid, qpid);
 	return wr_waitp->ret;
 }
 
-
 struct c4iw_dev {
 	struct ib_device ibdev;
 	struct c4iw_rdev rdev;
@@ -175,9 +191,7 @@ struct c4iw_dev {
 	struct idr qpidr;
 	struct idr mmidr;
 	spinlock_t lock;
-	struct list_head entry;
 	struct dentry *debugfs_root;
-	u8 registered;
 };
 
 static inline struct c4iw_dev *to_c4iw_dev(struct ib_device *ibdev)
diff --git a/drivers/infiniband/hw/cxgb4/provider.c b/drivers/infiniband/hw/cxgb4/provider.c
index f66dd8bf512..5b9e4220ca0 100644
--- a/drivers/infiniband/hw/cxgb4/provider.c
+++ b/drivers/infiniband/hw/cxgb4/provider.c
@@ -516,7 +516,6 @@ int c4iw_register_device(struct c4iw_dev *dev)
 		if (ret)
 			goto bail2;
 	}
-	dev->registered = 1;
 	return 0;
 bail2:
 	ib_unregister_device(&dev->ibdev);
@@ -535,6 +534,5 @@ void c4iw_unregister_device(struct c4iw_dev *dev)
 				   c4iw_class_attributes[i]);
 	ib_unregister_device(&dev->ibdev);
 	kfree(dev->ibdev.iwcm);
-	dev->registered = 0;
 	return;
 }
diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c
index 70a5a3c646d..3b773b05a89 100644
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -214,7 +214,7 @@ static int create_qp(struct c4iw_rdev *rdev, struct t4_wq *wq,
 		V_FW_RI_RES_WR_HOSTFCMODE(0) |	/* no host cidx updates */
 		V_FW_RI_RES_WR_CPRIO(0) |	/* don't keep in chip cache */
 		V_FW_RI_RES_WR_PCIECHN(0) |	/* set by uP at ri_init time */
-		t4_sq_onchip(&wq->sq) ? F_FW_RI_RES_WR_ONCHIP : 0 |
+		(t4_sq_onchip(&wq->sq) ? F_FW_RI_RES_WR_ONCHIP : 0) |
 		V_FW_RI_RES_WR_IQID(scq->cqid));
 	res->u.sqrq.dcaen_to_eqsize = cpu_to_be32(
 		V_FW_RI_RES_WR_DCAEN(0) |
@@ -1210,7 +1210,6 @@ int c4iw_modify_qp(struct c4iw_dev *rhp, struct c4iw_qp *qhp,
 			if (ret) {
 				if (internal)
 					c4iw_get_ep(&qhp->ep->com);
-				disconnect = abort = 1;
 				goto err;
 			}
 			break;
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index 58c0e417bc3..be24ac72611 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -398,7 +398,6 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
 	struct ipath_devdata *dd;
 	unsigned long long addr;
 	u32 bar0 = 0, bar1 = 0;
-	u8 rev;
 
 	dd = ipath_alloc_devdata(pdev);
 	if (IS_ERR(dd)) {
@@ -540,13 +539,7 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
 		goto bail_regions;
 	}
 
-	ret = pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
-	if (ret) {
-		ipath_dev_err(dd, "Failed to read PCI revision ID unit "
-			      "%u: err %d\n", dd->ipath_unit, -ret);
-		goto bail_regions;	/* shouldn't ever happen */
-	}
-	dd->ipath_pcirev = rev;
+	dd->ipath_pcirev = pdev->revision;
 
 #if defined(__powerpc__)
 	/* There isn't a generic way to specify writethrough mappings */
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index 33c7eedaba6..e74cdf9ef47 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -2563,7 +2563,7 @@ static int nes_cm_disconn_true(struct nes_qp *nesqp)
 	u16 last_ae;
 	u8 original_hw_tcp_state;
 	u8 original_ibqp_state;
-	enum iw_cm_event_status disconn_status = IW_CM_EVENT_STATUS_OK;
+	int disconn_status = 0;
 	int issue_disconn = 0;
 	int issue_close = 0;
 	int issue_flush = 0;
@@ -2605,7 +2605,7 @@ static int nes_cm_disconn_true(struct nes_qp *nesqp)
 			(last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET))) {
 		issue_disconn = 1;
 		if (last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET)
-			disconn_status = IW_CM_EVENT_STATUS_RESET;
+			disconn_status = -ECONNRESET;
 	}
 
 	if (((original_hw_tcp_state == NES_AEQE_TCP_STATE_CLOSED) ||
@@ -2666,7 +2666,7 @@ static int nes_cm_disconn_true(struct nes_qp *nesqp)
 			cm_id->provider_data = nesqp;
 			/* Send up the close complete event */
 			cm_event.event = IW_CM_EVENT_CLOSE;
-			cm_event.status = IW_CM_EVENT_STATUS_OK;
+			cm_event.status = 0;
 			cm_event.provider_data = cm_id->provider_data;
 			cm_event.local_addr = cm_id->local_addr;
 			cm_event.remote_addr = cm_id->remote_addr;
@@ -2966,7 +2966,7 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 	nes_add_ref(&nesqp->ibqp);
 
 	cm_event.event = IW_CM_EVENT_ESTABLISHED;
-	cm_event.status = IW_CM_EVENT_STATUS_ACCEPTED;
+	cm_event.status = 0;
 	cm_event.provider_data = (void *)nesqp;
 	cm_event.local_addr = cm_id->local_addr;
 	cm_event.remote_addr = cm_id->remote_addr;
@@ -3377,7 +3377,7 @@ static void cm_event_connected(struct nes_cm_event *event)
 
 	/* notify OF layer we successfully created the requested connection */
 	cm_event.event = IW_CM_EVENT_CONNECT_REPLY;
-	cm_event.status = IW_CM_EVENT_STATUS_ACCEPTED;
+	cm_event.status = 0;
 	cm_event.provider_data = cm_id->provider_data;
 	cm_event.local_addr.sin_family = AF_INET;
 	cm_event.local_addr.sin_port = cm_id->local_addr.sin_port;
@@ -3484,7 +3484,7 @@ static void cm_event_reset(struct nes_cm_event *event)
 	nesqp->cm_id = NULL;
 	/* cm_id->provider_data = NULL; */
 	cm_event.event = IW_CM_EVENT_DISCONNECT;
-	cm_event.status = IW_CM_EVENT_STATUS_RESET;
+	cm_event.status = -ECONNRESET;
 	cm_event.provider_data = cm_id->provider_data;
 	cm_event.local_addr = cm_id->local_addr;
 	cm_event.remote_addr = cm_id->remote_addr;
@@ -3495,7 +3495,7 @@ static void cm_event_reset(struct nes_cm_event *event)
 	ret = cm_id->event_handler(cm_id, &cm_event);
 	atomic_inc(&cm_closes);
 	cm_event.event = IW_CM_EVENT_CLOSE;
-	cm_event.status = IW_CM_EVENT_STATUS_OK;
+	cm_event.status = 0;
 	cm_event.provider_data = cm_id->provider_data;
 	cm_event.local_addr = cm_id->local_addr;
 	cm_event.remote_addr = cm_id->remote_addr;
@@ -3534,7 +3534,7 @@ static void cm_event_mpa_req(struct nes_cm_event *event)
 			cm_node, cm_id, jiffies);
 
 	cm_event.event = IW_CM_EVENT_CONNECT_REQUEST;
-	cm_event.status = IW_CM_EVENT_STATUS_OK;
+	cm_event.status = 0;
 	cm_event.provider_data = (void *)cm_node;
 
 	cm_event.local_addr.sin_family = AF_INET;
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 26d8018c0a7..95ca93ceeda 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -1484,7 +1484,7 @@ static int nes_destroy_qp(struct ib_qp *ibqp)
 			(nesqp->ibqp_state == IB_QPS_RTR)) && (nesqp->cm_id)) {
 		cm_id = nesqp->cm_id;
 		cm_event.event = IW_CM_EVENT_CONNECT_REPLY;
-		cm_event.status = IW_CM_EVENT_STATUS_TIMEOUT;
+		cm_event.status = -ETIMEDOUT;
 		cm_event.local_addr = cm_id->local_addr;
 		cm_event.remote_addr = cm_id->remote_addr;
 		cm_event.private_data = NULL;
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index 6bab3eaea70..9f53e68a096 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -7534,7 +7534,8 @@ static int serdes_7322_init_new(struct qib_pportdata *ppd)
 	ibsd_wr_allchans(ppd, 4, (1 << 10), BMASK(10, 10));
 	tstart = get_jiffies_64();
 	while (chan_done &&
-	       !time_after64(tstart, tstart + msecs_to_jiffies(500))) {
+	       !time_after64(get_jiffies_64(),
+			tstart + msecs_to_jiffies(500))) {
 		msleep(20);
 		for (chan = 0; chan < SERDES_CHANS; ++chan) {
 			rxcaldone = ahb_mod(ppd->dd, IBSD(ppd->hw_pidx),
diff --git a/drivers/infiniband/hw/qib/qib_pcie.c b/drivers/infiniband/hw/qib/qib_pcie.c
index 48b6674cbc4..891cc2ff5f0 100644
--- a/drivers/infiniband/hw/qib/qib_pcie.c
+++ b/drivers/infiniband/hw/qib/qib_pcie.c
@@ -526,11 +526,8 @@ static int qib_tune_pcie_coalesce(struct qib_devdata *dd)
 	 */
 	devid = parent->device;
 	if (devid >= 0x25e2 && devid <= 0x25fa) {
-		u8 rev;
-
 		/* 5000 P/V/X/Z */
-		pci_read_config_byte(parent, PCI_REVISION_ID, &rev);
-		if (rev <= 0xb2)
+		if (parent->revision <= 0xb2)
 			bits = 1U << 10;
 		else
 			bits = 7U << 10;
diff --git a/drivers/input/keyboard/atakbd.c b/drivers/input/keyboard/atakbd.c
index 1839194ea98..10bcd4ae540 100644
--- a/drivers/input/keyboard/atakbd.c
+++ b/drivers/input/keyboard/atakbd.c
@@ -223,8 +223,9 @@ static int __init atakbd_init(void)
 		return -ENODEV;
 
 	// need to init core driver if not already done so
-	if (atari_keyb_init())
-		return -ENODEV;
+	error = atari_keyb_init();
+	if (error)
+		return error;
 
 	atakbd_dev = input_allocate_device();
 	if (!atakbd_dev)
diff --git a/drivers/input/mouse/atarimouse.c b/drivers/input/mouse/atarimouse.c
index adf45b3040e..5c4a692bf73 100644
--- a/drivers/input/mouse/atarimouse.c
+++ b/drivers/input/mouse/atarimouse.c
@@ -77,15 +77,15 @@ static void atamouse_interrupt(char *buf)
 #endif
 
 	/* only relative events get here */
-	dx =  buf[1];
-	dy = -buf[2];
+	dx = buf[1];
+	dy = buf[2];
 
 	input_report_rel(atamouse_dev, REL_X, dx);
 	input_report_rel(atamouse_dev, REL_Y, dy);
 
-	input_report_key(atamouse_dev, BTN_LEFT,   buttons & 0x1);
+	input_report_key(atamouse_dev, BTN_LEFT,   buttons & 0x4);
 	input_report_key(atamouse_dev, BTN_MIDDLE, buttons & 0x2);
-	input_report_key(atamouse_dev, BTN_RIGHT,  buttons & 0x4);
+	input_report_key(atamouse_dev, BTN_RIGHT,  buttons & 0x1);
 
 	input_sync(atamouse_dev);
 
@@ -108,7 +108,7 @@ static int atamouse_open(struct input_dev *dev)
 static void atamouse_close(struct input_dev *dev)
 {
 	ikbd_mouse_disable();
-	atari_mouse_interrupt_hook = NULL;
+	atari_input_mouse_interrupt_hook = NULL;
 }
 
 static int __init atamouse_init(void)
@@ -118,8 +118,9 @@ static int __init atamouse_init(void)
 	if (!MACH_IS_ATARI || !ATARIHW_PRESENT(ST_MFP))
 		return -ENODEV;
 
-	if (!atari_keyb_init())
-		return -ENODEV;
+	error = atari_keyb_init();
+	if (error)
+		return error;
 
 	atamouse_dev = input_allocate_device();
 	if (!atamouse_dev)
diff --git a/drivers/lguest/Kconfig b/drivers/lguest/Kconfig
index 0aaa0597a62..34ae49dc557 100644
--- a/drivers/lguest/Kconfig
+++ b/drivers/lguest/Kconfig
@@ -5,8 +5,10 @@ config LGUEST
 	---help---
 	  This is a very simple module which allows you to run
 	  multiple instances of the same Linux kernel, using the
-	  "lguest" command found in the Documentation/lguest directory.
+	  "lguest" command found in the Documentation/virtual/lguest
+	  directory.
+
 	  Note that "lguest" is pronounced to rhyme with "fell quest",
-	  not "rustyvisor".  See Documentation/lguest/lguest.txt.
+	  not "rustyvisor". See Documentation/virtual/lguest/lguest.txt.
 
 	  If unsure, say N.  If curious, say M.  If masochistic, say Y.
diff --git a/drivers/lguest/Makefile b/drivers/lguest/Makefile
index 7d463c26124..8ac947c7e7c 100644
--- a/drivers/lguest/Makefile
+++ b/drivers/lguest/Makefile
@@ -18,7 +18,7 @@ Mastery: PREFIX=M
 Beer:
 	@for f in Preparation Guest Drivers Launcher Host Switcher Mastery; do echo "{==- $$f -==}"; make -s $$f; done; echo "{==-==}"
 Preparation Preparation! Guest Drivers Launcher Host Switcher Mastery:
-	@sh ../../Documentation/lguest/extract $(PREFIX) `find ../../* -name '*.[chS]' -wholename '*lguest*'`
+	@sh ../../Documentation/virtual/lguest/extract $(PREFIX) `find ../../* -name '*.[chS]' -wholename '*lguest*'`
 Puppy:
 	@clear
 	@printf "      __  \n (___()'\`;\n /,    /\`\n \\\\\\\"--\\\\\\   \n"
diff --git a/drivers/misc/ti-st/Kconfig b/drivers/misc/ti-st/Kconfig
index 2c8c3f39710..abb5de1afce 100644
--- a/drivers/misc/ti-st/Kconfig
+++ b/drivers/misc/ti-st/Kconfig
@@ -5,7 +5,7 @@
 menu "Texas Instruments shared transport line discipline"
 config TI_ST
 	tristate "Shared transport core driver"
-	depends on RFKILL
+	depends on NET && GPIOLIB
 	select FW_LOADER
 	help
 	  This enables the shared transport core driver for TI
diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index 486117f72c9..f91f82eabda 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -43,13 +43,15 @@ static void add_channel_to_table(struct st_data_s *st_gdata,
 	pr_info("%s: id %d\n", __func__, new_proto->chnl_id);
 	/* list now has the channel id as index itself */
 	st_gdata->list[new_proto->chnl_id] = new_proto;
+	st_gdata->is_registered[new_proto->chnl_id] = true;
 }
 
 static void remove_channel_from_table(struct st_data_s *st_gdata,
 		struct st_proto_s *proto)
 {
 	pr_info("%s: id %d\n", __func__, proto->chnl_id);
-	st_gdata->list[proto->chnl_id] = NULL;
+/*	st_gdata->list[proto->chnl_id] = NULL; */
+	st_gdata->is_registered[proto->chnl_id] = false;
 }
 
 /*
@@ -104,7 +106,7 @@ void st_send_frame(unsigned char chnl_id, struct st_data_s *st_gdata)
 
 	if (unlikely
 	    (st_gdata == NULL || st_gdata->rx_skb == NULL
-	     || st_gdata->list[chnl_id] == NULL)) {
+	     || st_gdata->is_registered[chnl_id] == false)) {
 		pr_err("chnl_id %d not registered, no data to send?",
 			   chnl_id);
 		kfree_skb(st_gdata->rx_skb);
@@ -141,14 +143,15 @@ void st_reg_complete(struct st_data_s *st_gdata, char err)
 	unsigned char i = 0;
 	pr_info(" %s ", __func__);
 	for (i = 0; i < ST_MAX_CHANNELS; i++) {
-		if (likely(st_gdata != NULL && st_gdata->list[i] != NULL &&
-			   st_gdata->list[i]->reg_complete_cb != NULL)) {
+		if (likely(st_gdata != NULL &&
+			st_gdata->is_registered[i] == true &&
+				st_gdata->list[i]->reg_complete_cb != NULL)) {
 			st_gdata->list[i]->reg_complete_cb
 				(st_gdata->list[i]->priv_data, err);
 			pr_info("protocol %d's cb sent %d\n", i, err);
 			if (err) { /* cleanup registered protocol */
 				st_gdata->protos_registered--;
-				st_gdata->list[i] = NULL;
+				st_gdata->is_registered[i] = false;
 			}
 		}
 	}
@@ -475,9 +478,9 @@ void kim_st_list_protocols(struct st_data_s *st_gdata, void *buf)
 {
 	seq_printf(buf, "[%d]\nBT=%c\nFM=%c\nGPS=%c\n",
 			st_gdata->protos_registered,
-			st_gdata->list[0x04] != NULL ? 'R' : 'U',
-			st_gdata->list[0x08] != NULL ? 'R' : 'U',
-			st_gdata->list[0x09] != NULL ? 'R' : 'U');
+			st_gdata->is_registered[0x04] == true ? 'R' : 'U',
+			st_gdata->is_registered[0x08] == true ? 'R' : 'U',
+			st_gdata->is_registered[0x09] == true ? 'R' : 'U');
 }
 
 /********************************************************************/
@@ -504,7 +507,7 @@ long st_register(struct st_proto_s *new_proto)
 		return -EPROTONOSUPPORT;
 	}
 
-	if (st_gdata->list[new_proto->chnl_id] != NULL) {
+	if (st_gdata->is_registered[new_proto->chnl_id] == true) {
 		pr_err("chnl_id %d already registered", new_proto->chnl_id);
 		return -EALREADY;
 	}
@@ -563,7 +566,7 @@ long st_register(struct st_proto_s *new_proto)
 		/* check for already registered once more,
 		 * since the above check is old
 		 */
-		if (st_gdata->list[new_proto->chnl_id] != NULL) {
+		if (st_gdata->is_registered[new_proto->chnl_id] == true) {
 			pr_err(" proto %d already registered ",
 				   new_proto->chnl_id);
 			return -EALREADY;
diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
index b4488c8f6b2..5da93ee6f6b 100644
--- a/drivers/misc/ti-st/st_kim.c
+++ b/drivers/misc/ti-st/st_kim.c
@@ -30,6 +30,7 @@
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <linux/sched.h>
+#include <linux/sysfs.h>
 #include <linux/tty.h>
 
 #include <linux/skbuff.h>
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 44b1f46458c..5069111c81c 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -260,6 +260,13 @@ config MTD_BCM963XX
 	  Support for parsing CFE image tag and creating MTD partitions on
 	  Broadcom BCM63xx boards.
 
+config MTD_LANTIQ
+	tristate "Lantiq SoC NOR support"
+	depends on LANTIQ
+	select MTD_PARTITIONS
+	help
+	  Support for NOR flash attached to the Lantiq SoC's External Bus Unit.
+
 config MTD_DILNETPC
 	tristate "CFI Flash device mapped on DIL/Net PC"
 	depends on X86 && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 08533bd5cba..6adf4c9b905 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -60,3 +60,4 @@ obj-$(CONFIG_MTD_VMU)		+= vmu-flash.o
 obj-$(CONFIG_MTD_GPIO_ADDR)	+= gpio-addr-flash.o
 obj-$(CONFIG_MTD_BCM963XX)	+= bcm963xx-flash.o
 obj-$(CONFIG_MTD_LATCH_ADDR)	+= latch-addr-flash.o
+obj-$(CONFIG_MTD_LANTIQ)	+= lantiq-flash.o
diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
new file mode 100644
index 00000000000..a90cabd7b84
--- /dev/null
+++ b/drivers/mtd/maps/lantiq-flash.c
@@ -0,0 +1,251 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2004 Liu Peng Infineon IFAP DC COM CPE
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/cfi.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+
+#include <lantiq_soc.h>
+#include <lantiq_platform.h>
+
+/*
+ * The NOR flash is connected to the same external bus unit (EBU) as PCI.
+ * To make PCI work we need to enable the endianness swapping for the address
+ * written to the EBU. This endianness swapping works for PCI correctly but
+ * fails for attached NOR devices. To workaround this we need to use a complex
+ * map. The workaround involves swapping all addresses whilst probing the chip.
+ * Once probing is complete we stop swapping the addresses but swizzle the
+ * unlock addresses to ensure that access to the NOR device works correctly.
+ */
+
+enum {
+	LTQ_NOR_PROBING,
+	LTQ_NOR_NORMAL
+};
+
+struct ltq_mtd {
+	struct resource *res;
+	struct mtd_info *mtd;
+	struct map_info *map;
+};
+
+static char ltq_map_name[] = "ltq_nor";
+
+static map_word
+ltq_read16(struct map_info *map, unsigned long adr)
+{
+	unsigned long flags;
+	map_word temp;
+
+	if (map->map_priv_1 == LTQ_NOR_PROBING)
+		adr ^= 2;
+	spin_lock_irqsave(&ebu_lock, flags);
+	temp.x[0] = *(u16 *)(map->virt + adr);
+	spin_unlock_irqrestore(&ebu_lock, flags);
+	return temp;
+}
+
+static void
+ltq_write16(struct map_info *map, map_word d, unsigned long adr)
+{
+	unsigned long flags;
+
+	if (map->map_priv_1 == LTQ_NOR_PROBING)
+		adr ^= 2;
+	spin_lock_irqsave(&ebu_lock, flags);
+	*(u16 *)(map->virt + adr) = d.x[0];
+	spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+/*
+ * The following 2 functions copy data between iomem and a cached memory
+ * section. As memcpy() makes use of pre-fetching we cannot use it here.
+ * The normal alternative of using memcpy_{to,from}io also makes use of
+ * memcpy() on MIPS so it is not applicable either. We are therefore stuck
+ * with having to use our own loop.
+ */
+static void
+ltq_copy_from(struct map_info *map, void *to,
+	unsigned long from, ssize_t len)
+{
+	unsigned char *f = (unsigned char *)map->virt + from;
+	unsigned char *t = (unsigned char *)to;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ebu_lock, flags);
+	while (len--)
+		*t++ = *f++;
+	spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+static void
+ltq_copy_to(struct map_info *map, unsigned long to,
+	const void *from, ssize_t len)
+{
+	unsigned char *f = (unsigned char *)from;
+	unsigned char *t = (unsigned char *)map->virt + to;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ebu_lock, flags);
+	while (len--)
+		*t++ = *f++;
+	spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+static const char const *part_probe_types[] = { "cmdlinepart", NULL };
+
+static int __init
+ltq_mtd_probe(struct platform_device *pdev)
+{
+	struct physmap_flash_data *ltq_mtd_data = dev_get_platdata(&pdev->dev);
+	struct ltq_mtd *ltq_mtd;
+	struct mtd_partition *parts;
+	struct resource *res;
+	int nr_parts = 0;
+	struct cfi_private *cfi;
+	int err;
+
+	ltq_mtd = kzalloc(sizeof(struct ltq_mtd), GFP_KERNEL);
+	platform_set_drvdata(pdev, ltq_mtd);
+
+	ltq_mtd->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!ltq_mtd->res) {
+		dev_err(&pdev->dev, "failed to get memory resource");
+		err = -ENOENT;
+		goto err_out;
+	}
+
+	res = devm_request_mem_region(&pdev->dev, ltq_mtd->res->start,
+		resource_size(ltq_mtd->res), dev_name(&pdev->dev));
+	if (!ltq_mtd->res) {
+		dev_err(&pdev->dev, "failed to request mem resource");
+		err = -EBUSY;
+		goto err_out;
+	}
+
+	ltq_mtd->map = kzalloc(sizeof(struct map_info), GFP_KERNEL);
+	ltq_mtd->map->phys = res->start;
+	ltq_mtd->map->size = resource_size(res);
+	ltq_mtd->map->virt = devm_ioremap_nocache(&pdev->dev,
+				ltq_mtd->map->phys, ltq_mtd->map->size);
+	if (!ltq_mtd->map->virt) {
+		dev_err(&pdev->dev, "failed to ioremap!\n");
+		err = -ENOMEM;
+		goto err_free;
+	}
+
+	ltq_mtd->map->name = ltq_map_name;
+	ltq_mtd->map->bankwidth = 2;
+	ltq_mtd->map->read = ltq_read16;
+	ltq_mtd->map->write = ltq_write16;
+	ltq_mtd->map->copy_from = ltq_copy_from;
+	ltq_mtd->map->copy_to = ltq_copy_to;
+
+	ltq_mtd->map->map_priv_1 = LTQ_NOR_PROBING;
+	ltq_mtd->mtd = do_map_probe("cfi_probe", ltq_mtd->map);
+	ltq_mtd->map->map_priv_1 = LTQ_NOR_NORMAL;
+
+	if (!ltq_mtd->mtd) {
+		dev_err(&pdev->dev, "probing failed\n");
+		err = -ENXIO;
+		goto err_unmap;
+	}
+
+	ltq_mtd->mtd->owner = THIS_MODULE;
+
+	cfi = ltq_mtd->map->fldrv_priv;
+	cfi->addr_unlock1 ^= 1;
+	cfi->addr_unlock2 ^= 1;
+
+	nr_parts = parse_mtd_partitions(ltq_mtd->mtd,
+				part_probe_types, &parts, 0);
+	if (nr_parts > 0) {
+		dev_info(&pdev->dev,
+			"using %d partitions from cmdline", nr_parts);
+	} else {
+		nr_parts = ltq_mtd_data->nr_parts;
+		parts = ltq_mtd_data->parts;
+	}
+
+	err = add_mtd_partitions(ltq_mtd->mtd, parts, nr_parts);
+	if (err) {
+		dev_err(&pdev->dev, "failed to add partitions\n");
+		goto err_destroy;
+	}
+
+	return 0;
+
+err_destroy:
+	map_destroy(ltq_mtd->mtd);
+err_unmap:
+	iounmap(ltq_mtd->map->virt);
+err_free:
+	kfree(ltq_mtd->map);
+err_out:
+	kfree(ltq_mtd);
+	return err;
+}
+
+static int __devexit
+ltq_mtd_remove(struct platform_device *pdev)
+{
+	struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev);
+
+	if (ltq_mtd) {
+		if (ltq_mtd->mtd) {
+			del_mtd_partitions(ltq_mtd->mtd);
+			map_destroy(ltq_mtd->mtd);
+		}
+		if (ltq_mtd->map->virt)
+			iounmap(ltq_mtd->map->virt);
+		kfree(ltq_mtd->map);
+		kfree(ltq_mtd);
+	}
+	return 0;
+}
+
+static struct platform_driver ltq_mtd_driver = {
+	.remove = __devexit_p(ltq_mtd_remove),
+	.driver = {
+		.name = "ltq_nor",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init
+init_ltq_mtd(void)
+{
+	int ret = platform_driver_probe(&ltq_mtd_driver, ltq_mtd_probe);
+
+	if (ret)
+		pr_err("ltq_nor: error registering platform driver");
+	return ret;
+}
+
+static void __exit
+exit_ltq_mtd(void)
+{
+	platform_driver_unregister(&ltq_mtd_driver);
+}
+
+module_init(init_ltq_mtd);
+module_exit(exit_ltq_mtd);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("Lantiq SoC NOR");
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 3ffe05db492..5d513b54a7d 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/slab.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
@@ -470,7 +471,7 @@ static int __init au1xxx_nand_init(void)
 
 #ifdef CONFIG_MIPS_PB1550
 	/* set gpio206 high */
-	au_writel(au_readl(GPIO2_DIR) & ~(1 << 6), GPIO2_DIR);
+	gpio_direction_input(206);
 
 	boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr_read(BCSR_STATUS) >> 6) & 0x1);
 
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 6c884ef1b06..19f04a34783 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2017,6 +2017,13 @@ config FTMAC100
 	  from Faraday. It is used on Faraday A320, Andes AG101 and some
 	  other ARM/NDS32 SoC's.
 
+config LANTIQ_ETOP
+	tristate "Lantiq SoC ETOP driver"
+	depends on SOC_TYPE_XWAY
+	help
+	  Support for the MII0 inside the Lantiq SoC
+
+
 source "drivers/net/fs_enet/Kconfig"
 
 source "drivers/net/octeon/Kconfig"
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index e5a7375685a..209fbb70619 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -259,6 +259,7 @@ obj-$(CONFIG_MLX4_CORE) += mlx4/
 obj-$(CONFIG_ENC28J60) += enc28j60.o
 obj-$(CONFIG_ETHOC) += ethoc.o
 obj-$(CONFIG_GRETH) += greth.o
+obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
 
 obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
 
diff --git a/drivers/net/atarilance.c b/drivers/net/atarilance.c
index ce0091eb06f..1264d781b55 100644
--- a/drivers/net/atarilance.c
+++ b/drivers/net/atarilance.c
@@ -554,7 +554,7 @@ static unsigned long __init lance_probe1( struct net_device *dev,
 		memaddr == (unsigned short *)0xffe00000) {
 		/* PAMs card and Riebl on ST use level 5 autovector */
 		if (request_irq(IRQ_AUTO_5, lance_interrupt, IRQ_TYPE_PRIO,
-		            "PAM/Riebl-ST Ethernet", dev)) {
+		            "PAM,Riebl-ST Ethernet", dev)) {
 			printk( "Lance: request for irq %d failed\n", IRQ_AUTO_5 );
 			return 0;
 		}
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 6f8adc7f5d7..e145f2c455c 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -5100,11 +5100,6 @@ err_set_interrupt:
 	return err;
 }
 
-static void ring_free_rcu(struct rcu_head *head)
-{
-	kfree(container_of(head, struct ixgbe_ring, rcu));
-}
-
 /**
  * ixgbe_clear_interrupt_scheme - Clear the current interrupt scheme settings
  * @adapter: board private structure to clear interrupt scheme on
@@ -5126,7 +5121,7 @@ void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter)
 		/* ixgbe_get_stats64() might access this ring, we must wait
 		 * a grace period before freeing it.
 		 */
-		call_rcu(&ring->rcu, ring_free_rcu);
+		kfree_rcu(ring, rcu);
 		adapter->rx_ring[i] = NULL;
 	}
 
diff --git a/drivers/net/lantiq_etop.c b/drivers/net/lantiq_etop.c
new file mode 100644
index 00000000000..45f252b7da3
--- /dev/null
+++ b/drivers/net/lantiq_etop.c
@@ -0,0 +1,805 @@
+/*
+ *   This program is free software; you can redistribute it and/or modify it
+ *   under the terms of the GNU General Public License version 2 as published
+ *   by the Free Software Foundation.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *   Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/uaccess.h>
+#include <linux/in.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/phy.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/ethtool.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <asm/checksum.h>
+
+#include <lantiq_soc.h>
+#include <xway_dma.h>
+#include <lantiq_platform.h>
+
+#define LTQ_ETOP_MDIO		0x11804
+#define MDIO_REQUEST		0x80000000
+#define MDIO_READ		0x40000000
+#define MDIO_ADDR_MASK		0x1f
+#define MDIO_ADDR_OFFSET	0x15
+#define MDIO_REG_MASK		0x1f
+#define MDIO_REG_OFFSET		0x10
+#define MDIO_VAL_MASK		0xffff
+
+#define PPE32_CGEN		0x800
+#define LQ_PPE32_ENET_MAC_CFG	0x1840
+
+#define LTQ_ETOP_ENETS0		0x11850
+#define LTQ_ETOP_MAC_DA0	0x1186C
+#define LTQ_ETOP_MAC_DA1	0x11870
+#define LTQ_ETOP_CFG		0x16020
+#define LTQ_ETOP_IGPLEN		0x16080
+
+#define MAX_DMA_CHAN		0x8
+#define MAX_DMA_CRC_LEN		0x4
+#define MAX_DMA_DATA_LEN	0x600
+
+#define ETOP_FTCU		BIT(28)
+#define ETOP_MII_MASK		0xf
+#define ETOP_MII_NORMAL		0xd
+#define ETOP_MII_REVERSE	0xe
+#define ETOP_PLEN_UNDER		0x40
+#define ETOP_CGEN		0x800
+
+/* use 2 static channels for TX/RX */
+#define LTQ_ETOP_TX_CHANNEL	1
+#define LTQ_ETOP_RX_CHANNEL	6
+#define IS_TX(x)		(x == LTQ_ETOP_TX_CHANNEL)
+#define IS_RX(x)		(x == LTQ_ETOP_RX_CHANNEL)
+
+#define ltq_etop_r32(x)		ltq_r32(ltq_etop_membase + (x))
+#define ltq_etop_w32(x, y)	ltq_w32(x, ltq_etop_membase + (y))
+#define ltq_etop_w32_mask(x, y, z)	\
+		ltq_w32_mask(x, y, ltq_etop_membase + (z))
+
+#define DRV_VERSION	"1.0"
+
+static void __iomem *ltq_etop_membase;
+
+struct ltq_etop_chan {
+	int idx;
+	int tx_free;
+	struct net_device *netdev;
+	struct napi_struct napi;
+	struct ltq_dma_channel dma;
+	struct sk_buff *skb[LTQ_DESC_NUM];
+};
+
+struct ltq_etop_priv {
+	struct net_device *netdev;
+	struct ltq_eth_data *pldata;
+	struct resource *res;
+
+	struct mii_bus *mii_bus;
+	struct phy_device *phydev;
+
+	struct ltq_etop_chan ch[MAX_DMA_CHAN];
+	int tx_free[MAX_DMA_CHAN >> 1];
+
+	spinlock_t lock;
+};
+
+static int
+ltq_etop_alloc_skb(struct ltq_etop_chan *ch)
+{
+	ch->skb[ch->dma.desc] = dev_alloc_skb(MAX_DMA_DATA_LEN);
+	if (!ch->skb[ch->dma.desc])
+		return -ENOMEM;
+	ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
+		ch->skb[ch->dma.desc]->data, MAX_DMA_DATA_LEN,
+		DMA_FROM_DEVICE);
+	ch->dma.desc_base[ch->dma.desc].addr =
+		CPHYSADDR(ch->skb[ch->dma.desc]->data);
+	ch->dma.desc_base[ch->dma.desc].ctl =
+		LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
+		MAX_DMA_DATA_LEN;
+	skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN);
+	return 0;
+}
+
+static void
+ltq_etop_hw_receive(struct ltq_etop_chan *ch)
+{
+	struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
+	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+	struct sk_buff *skb = ch->skb[ch->dma.desc];
+	int len = (desc->ctl & LTQ_DMA_SIZE_MASK) - MAX_DMA_CRC_LEN;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (ltq_etop_alloc_skb(ch)) {
+		netdev_err(ch->netdev,
+			"failed to allocate new rx buffer, stopping DMA\n");
+		ltq_dma_close(&ch->dma);
+	}
+	ch->dma.desc++;
+	ch->dma.desc %= LTQ_DESC_NUM;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	skb_put(skb, len);
+	skb->dev = ch->netdev;
+	skb->protocol = eth_type_trans(skb, ch->netdev);
+	netif_receive_skb(skb);
+}
+
+static int
+ltq_etop_poll_rx(struct napi_struct *napi, int budget)
+{
+	struct ltq_etop_chan *ch = container_of(napi,
+				struct ltq_etop_chan, napi);
+	int rx = 0;
+	int complete = 0;
+
+	while ((rx < budget) && !complete) {
+		struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+
+		if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
+			ltq_etop_hw_receive(ch);
+			rx++;
+		} else {
+			complete = 1;
+		}
+	}
+	if (complete || !rx) {
+		napi_complete(&ch->napi);
+		ltq_dma_ack_irq(&ch->dma);
+	}
+	return rx;
+}
+
+static int
+ltq_etop_poll_tx(struct napi_struct *napi, int budget)
+{
+	struct ltq_etop_chan *ch =
+		container_of(napi, struct ltq_etop_chan, napi);
+	struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
+	struct netdev_queue *txq =
+		netdev_get_tx_queue(ch->netdev, ch->idx >> 1);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	while ((ch->dma.desc_base[ch->tx_free].ctl &
+			(LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
+		dev_kfree_skb_any(ch->skb[ch->tx_free]);
+		ch->skb[ch->tx_free] = NULL;
+		memset(&ch->dma.desc_base[ch->tx_free], 0,
+			sizeof(struct ltq_dma_desc));
+		ch->tx_free++;
+		ch->tx_free %= LTQ_DESC_NUM;
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (netif_tx_queue_stopped(txq))
+		netif_tx_start_queue(txq);
+	napi_complete(&ch->napi);
+	ltq_dma_ack_irq(&ch->dma);
+	return 1;
+}
+
+static irqreturn_t
+ltq_etop_dma_irq(int irq, void *_priv)
+{
+	struct ltq_etop_priv *priv = _priv;
+	int ch = irq - LTQ_DMA_CH0_INT;
+
+	napi_schedule(&priv->ch[ch].napi);
+	return IRQ_HANDLED;
+}
+
+static void
+ltq_etop_free_channel(struct net_device *dev, struct ltq_etop_chan *ch)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+
+	ltq_dma_free(&ch->dma);
+	if (ch->dma.irq)
+		free_irq(ch->dma.irq, priv);
+	if (IS_RX(ch->idx)) {
+		int desc;
+		for (desc = 0; desc < LTQ_DESC_NUM; desc++)
+			dev_kfree_skb_any(ch->skb[ch->dma.desc]);
+	}
+}
+
+static void
+ltq_etop_hw_exit(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	int i;
+
+	ltq_pmu_disable(PMU_PPE);
+	for (i = 0; i < MAX_DMA_CHAN; i++)
+		if (IS_TX(i) || IS_RX(i))
+			ltq_etop_free_channel(dev, &priv->ch[i]);
+}
+
+static int
+ltq_etop_hw_init(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	int i;
+
+	ltq_pmu_enable(PMU_PPE);
+
+	switch (priv->pldata->mii_mode) {
+	case PHY_INTERFACE_MODE_RMII:
+		ltq_etop_w32_mask(ETOP_MII_MASK,
+			ETOP_MII_REVERSE, LTQ_ETOP_CFG);
+		break;
+
+	case PHY_INTERFACE_MODE_MII:
+		ltq_etop_w32_mask(ETOP_MII_MASK,
+			ETOP_MII_NORMAL, LTQ_ETOP_CFG);
+		break;
+
+	default:
+		netdev_err(dev, "unknown mii mode %d\n",
+			priv->pldata->mii_mode);
+		return -ENOTSUPP;
+	}
+
+	/* enable crc generation */
+	ltq_etop_w32(PPE32_CGEN, LQ_PPE32_ENET_MAC_CFG);
+
+	ltq_dma_init_port(DMA_PORT_ETOP);
+
+	for (i = 0; i < MAX_DMA_CHAN; i++) {
+		int irq = LTQ_DMA_CH0_INT + i;
+		struct ltq_etop_chan *ch = &priv->ch[i];
+
+		ch->idx = ch->dma.nr = i;
+
+		if (IS_TX(i)) {
+			ltq_dma_alloc_tx(&ch->dma);
+			request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
+				"etop_tx", priv);
+		} else if (IS_RX(i)) {
+			ltq_dma_alloc_rx(&ch->dma);
+			for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
+					ch->dma.desc++)
+				if (ltq_etop_alloc_skb(ch))
+					return -ENOMEM;
+			ch->dma.desc = 0;
+			request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
+				"etop_rx", priv);
+		}
+		ch->dma.irq = irq;
+	}
+	return 0;
+}
+
+static void
+ltq_etop_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	strcpy(info->driver, "Lantiq ETOP");
+	strcpy(info->bus_info, "internal");
+	strcpy(info->version, DRV_VERSION);
+}
+
+static int
+ltq_etop_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+
+	return phy_ethtool_gset(priv->phydev, cmd);
+}
+
+static int
+ltq_etop_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+
+	return phy_ethtool_sset(priv->phydev, cmd);
+}
+
+static int
+ltq_etop_nway_reset(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+
+	return phy_start_aneg(priv->phydev);
+}
+
+static const struct ethtool_ops ltq_etop_ethtool_ops = {
+	.get_drvinfo = ltq_etop_get_drvinfo,
+	.get_settings = ltq_etop_get_settings,
+	.set_settings = ltq_etop_set_settings,
+	.nway_reset = ltq_etop_nway_reset,
+};
+
+static int
+ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data)
+{
+	u32 val = MDIO_REQUEST |
+		((phy_addr & MDIO_ADDR_MASK) << MDIO_ADDR_OFFSET) |
+		((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET) |
+		phy_data;
+
+	while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
+		;
+	ltq_etop_w32(val, LTQ_ETOP_MDIO);
+	return 0;
+}
+
+static int
+ltq_etop_mdio_rd(struct mii_bus *bus, int phy_addr, int phy_reg)
+{
+	u32 val = MDIO_REQUEST | MDIO_READ |
+		((phy_addr & MDIO_ADDR_MASK) << MDIO_ADDR_OFFSET) |
+		((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET);
+
+	while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
+		;
+	ltq_etop_w32(val, LTQ_ETOP_MDIO);
+	while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
+		;
+	val = ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_VAL_MASK;
+	return val;
+}
+
+static void
+ltq_etop_mdio_link(struct net_device *dev)
+{
+	/* nothing to do  */
+}
+
+static int
+ltq_etop_mdio_probe(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	struct phy_device *phydev = NULL;
+	int phy_addr;
+
+	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+		if (priv->mii_bus->phy_map[phy_addr]) {
+			phydev = priv->mii_bus->phy_map[phy_addr];
+			break;
+		}
+	}
+
+	if (!phydev) {
+		netdev_err(dev, "no PHY found\n");
+		return -ENODEV;
+	}
+
+	phydev = phy_connect(dev, dev_name(&phydev->dev), &ltq_etop_mdio_link,
+			0, priv->pldata->mii_mode);
+
+	if (IS_ERR(phydev)) {
+		netdev_err(dev, "Could not attach to PHY\n");
+		return PTR_ERR(phydev);
+	}
+
+	phydev->supported &= (SUPPORTED_10baseT_Half
+			      | SUPPORTED_10baseT_Full
+			      | SUPPORTED_100baseT_Half
+			      | SUPPORTED_100baseT_Full
+			      | SUPPORTED_Autoneg
+			      | SUPPORTED_MII
+			      | SUPPORTED_TP);
+
+	phydev->advertising = phydev->supported;
+	priv->phydev = phydev;
+	pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
+	       dev->name, phydev->drv->name,
+	       dev_name(&phydev->dev), phydev->irq);
+
+	return 0;
+}
+
+static int
+ltq_etop_mdio_init(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	int i;
+	int err;
+
+	priv->mii_bus = mdiobus_alloc();
+	if (!priv->mii_bus) {
+		netdev_err(dev, "failed to allocate mii bus\n");
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	priv->mii_bus->priv = dev;
+	priv->mii_bus->read = ltq_etop_mdio_rd;
+	priv->mii_bus->write = ltq_etop_mdio_wr;
+	priv->mii_bus->name = "ltq_mii";
+	snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
+	priv->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+	if (!priv->mii_bus->irq) {
+		err = -ENOMEM;
+		goto err_out_free_mdiobus;
+	}
+
+	for (i = 0; i < PHY_MAX_ADDR; ++i)
+		priv->mii_bus->irq[i] = PHY_POLL;
+
+	if (mdiobus_register(priv->mii_bus)) {
+		err = -ENXIO;
+		goto err_out_free_mdio_irq;
+	}
+
+	if (ltq_etop_mdio_probe(dev)) {
+		err = -ENXIO;
+		goto err_out_unregister_bus;
+	}
+	return 0;
+
+err_out_unregister_bus:
+	mdiobus_unregister(priv->mii_bus);
+err_out_free_mdio_irq:
+	kfree(priv->mii_bus->irq);
+err_out_free_mdiobus:
+	mdiobus_free(priv->mii_bus);
+err_out:
+	return err;
+}
+
+static void
+ltq_etop_mdio_cleanup(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+
+	phy_disconnect(priv->phydev);
+	mdiobus_unregister(priv->mii_bus);
+	kfree(priv->mii_bus->irq);
+	mdiobus_free(priv->mii_bus);
+}
+
+static int
+ltq_etop_open(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	int i;
+
+	for (i = 0; i < MAX_DMA_CHAN; i++) {
+		struct ltq_etop_chan *ch = &priv->ch[i];
+
+		if (!IS_TX(i) && (!IS_RX(i)))
+			continue;
+		ltq_dma_open(&ch->dma);
+		napi_enable(&ch->napi);
+	}
+	phy_start(priv->phydev);
+	netif_tx_start_all_queues(dev);
+	return 0;
+}
+
+static int
+ltq_etop_stop(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	int i;
+
+	netif_tx_stop_all_queues(dev);
+	phy_stop(priv->phydev);
+	for (i = 0; i < MAX_DMA_CHAN; i++) {
+		struct ltq_etop_chan *ch = &priv->ch[i];
+
+		if (!IS_RX(i) && !IS_TX(i))
+			continue;
+		napi_disable(&ch->napi);
+		ltq_dma_close(&ch->dma);
+	}
+	return 0;
+}
+
+static int
+ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	int queue = skb_get_queue_mapping(skb);
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1];
+	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+	int len;
+	unsigned long flags;
+	u32 byte_offset;
+
+	len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+
+	if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
+		dev_kfree_skb_any(skb);
+		netdev_err(dev, "tx ring full\n");
+		netif_tx_stop_queue(txq);
+		return NETDEV_TX_BUSY;
+	}
+
+	/* dma needs to start on a 16 byte aligned address */
+	byte_offset = CPHYSADDR(skb->data) % 16;
+	ch->skb[ch->dma.desc] = skb;
+
+	dev->trans_start = jiffies;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len,
+						DMA_TO_DEVICE)) - byte_offset;
+	wmb();
+	desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
+		LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
+	ch->dma.desc++;
+	ch->dma.desc %= LTQ_DESC_NUM;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
+		netif_tx_stop_queue(txq);
+
+	return NETDEV_TX_OK;
+}
+
+static int
+ltq_etop_change_mtu(struct net_device *dev, int new_mtu)
+{
+	int ret = eth_change_mtu(dev, new_mtu);
+
+	if (!ret) {
+		struct ltq_etop_priv *priv = netdev_priv(dev);
+		unsigned long flags;
+
+		spin_lock_irqsave(&priv->lock, flags);
+		ltq_etop_w32((ETOP_PLEN_UNDER << 16) | new_mtu,
+			LTQ_ETOP_IGPLEN);
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+	return ret;
+}
+
+static int
+ltq_etop_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+
+	/* TODO: mii-toll reports "No MII transceiver present!." ?!*/
+	return phy_mii_ioctl(priv->phydev, rq, cmd);
+}
+
+static int
+ltq_etop_set_mac_address(struct net_device *dev, void *p)
+{
+	int ret = eth_mac_addr(dev, p);
+
+	if (!ret) {
+		struct ltq_etop_priv *priv = netdev_priv(dev);
+		unsigned long flags;
+
+		/* store the mac for the unicast filter */
+		spin_lock_irqsave(&priv->lock, flags);
+		ltq_etop_w32(*((u32 *)dev->dev_addr), LTQ_ETOP_MAC_DA0);
+		ltq_etop_w32(*((u16 *)&dev->dev_addr[4]) << 16,
+			LTQ_ETOP_MAC_DA1);
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+	return ret;
+}
+
+static void
+ltq_etop_set_multicast_list(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	unsigned long flags;
+
+	/* ensure that the unicast filter is not enabled in promiscious mode */
+	spin_lock_irqsave(&priv->lock, flags);
+	if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI))
+		ltq_etop_w32_mask(ETOP_FTCU, 0, LTQ_ETOP_ENETS0);
+	else
+		ltq_etop_w32_mask(0, ETOP_FTCU, LTQ_ETOP_ENETS0);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static u16
+ltq_etop_select_queue(struct net_device *dev, struct sk_buff *skb)
+{
+	/* we are currently only using the first queue */
+	return 0;
+}
+
+static int
+ltq_etop_init(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	struct sockaddr mac;
+	int err;
+
+	ether_setup(dev);
+	dev->watchdog_timeo = 10 * HZ;
+	err = ltq_etop_hw_init(dev);
+	if (err)
+		goto err_hw;
+	ltq_etop_change_mtu(dev, 1500);
+
+	memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
+	if (!is_valid_ether_addr(mac.sa_data)) {
+		pr_warn("etop: invalid MAC, using random\n");
+		random_ether_addr(mac.sa_data);
+	}
+
+	err = ltq_etop_set_mac_address(dev, &mac);
+	if (err)
+		goto err_netdev;
+	ltq_etop_set_multicast_list(dev);
+	err = ltq_etop_mdio_init(dev);
+	if (err)
+		goto err_netdev;
+	return 0;
+
+err_netdev:
+	unregister_netdev(dev);
+	free_netdev(dev);
+err_hw:
+	ltq_etop_hw_exit(dev);
+	return err;
+}
+
+static void
+ltq_etop_tx_timeout(struct net_device *dev)
+{
+	int err;
+
+	ltq_etop_hw_exit(dev);
+	err = ltq_etop_hw_init(dev);
+	if (err)
+		goto err_hw;
+	dev->trans_start = jiffies;
+	netif_wake_queue(dev);
+	return;
+
+err_hw:
+	ltq_etop_hw_exit(dev);
+	netdev_err(dev, "failed to restart etop after TX timeout\n");
+}
+
+static const struct net_device_ops ltq_eth_netdev_ops = {
+	.ndo_open = ltq_etop_open,
+	.ndo_stop = ltq_etop_stop,
+	.ndo_start_xmit = ltq_etop_tx,
+	.ndo_change_mtu = ltq_etop_change_mtu,
+	.ndo_do_ioctl = ltq_etop_ioctl,
+	.ndo_set_mac_address = ltq_etop_set_mac_address,
+	.ndo_validate_addr = eth_validate_addr,
+	.ndo_set_multicast_list = ltq_etop_set_multicast_list,
+	.ndo_select_queue = ltq_etop_select_queue,
+	.ndo_init = ltq_etop_init,
+	.ndo_tx_timeout = ltq_etop_tx_timeout,
+};
+
+static int __init
+ltq_etop_probe(struct platform_device *pdev)
+{
+	struct net_device *dev;
+	struct ltq_etop_priv *priv;
+	struct resource *res;
+	int err;
+	int i;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get etop resource\n");
+		err = -ENOENT;
+		goto err_out;
+	}
+
+	res = devm_request_mem_region(&pdev->dev, res->start,
+		resource_size(res), dev_name(&pdev->dev));
+	if (!res) {
+		dev_err(&pdev->dev, "failed to request etop resource\n");
+		err = -EBUSY;
+		goto err_out;
+	}
+
+	ltq_etop_membase = devm_ioremap_nocache(&pdev->dev,
+		res->start, resource_size(res));
+	if (!ltq_etop_membase) {
+		dev_err(&pdev->dev, "failed to remap etop engine %d\n",
+			pdev->id);
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
+	strcpy(dev->name, "eth%d");
+	dev->netdev_ops = &ltq_eth_netdev_ops;
+	dev->ethtool_ops = &ltq_etop_ethtool_ops;
+	priv = netdev_priv(dev);
+	priv->res = res;
+	priv->pldata = dev_get_platdata(&pdev->dev);
+	priv->netdev = dev;
+	spin_lock_init(&priv->lock);
+
+	for (i = 0; i < MAX_DMA_CHAN; i++) {
+		if (IS_TX(i))
+			netif_napi_add(dev, &priv->ch[i].napi,
+				ltq_etop_poll_tx, 8);
+		else if (IS_RX(i))
+			netif_napi_add(dev, &priv->ch[i].napi,
+				ltq_etop_poll_rx, 32);
+		priv->ch[i].netdev = dev;
+	}
+
+	err = register_netdev(dev);
+	if (err)
+		goto err_free;
+
+	platform_set_drvdata(pdev, dev);
+	return 0;
+
+err_free:
+	kfree(dev);
+err_out:
+	return err;
+}
+
+static int __devexit
+ltq_etop_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+
+	if (dev) {
+		netif_tx_stop_all_queues(dev);
+		ltq_etop_hw_exit(dev);
+		ltq_etop_mdio_cleanup(dev);
+		unregister_netdev(dev);
+	}
+	return 0;
+}
+
+static struct platform_driver ltq_mii_driver = {
+	.remove = __devexit_p(ltq_etop_remove),
+	.driver = {
+		.name = "ltq_etop",
+		.owner = THIS_MODULE,
+	},
+};
+
+int __init
+init_ltq_etop(void)
+{
+	int ret = platform_driver_probe(&ltq_mii_driver, ltq_etop_probe);
+
+	if (ret)
+		pr_err("ltq_etop: Error registering platfom driver!");
+	return ret;
+}
+
+static void __exit
+exit_ltq_etop(void)
+{
+	platform_driver_unregister(&ltq_mii_driver);
+}
+
+module_init(init_ltq_etop);
+module_exit(exit_ltq_etop);
+
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("Lantiq SoC ETOP");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 78e34e9e4f0..d8e4e69ad0b 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -603,21 +603,13 @@ static int macvlan_port_create(struct net_device *dev)
 	return err;
 }
 
-static void macvlan_port_rcu_free(struct rcu_head *head)
-{
-	struct macvlan_port *port;
-
-	port = container_of(head, struct macvlan_port, rcu);
-	kfree(port);
-}
-
 static void macvlan_port_destroy(struct net_device *dev)
 {
 	struct macvlan_port *port = macvlan_port_get(dev);
 
 	dev->priv_flags &= ~IFF_MACVLAN_PORT;
 	netdev_rx_handler_unregister(dev);
-	call_rcu(&port->rcu, macvlan_port_rcu_free);
+	kfree_rcu(port, rcu);
 }
 
 static int macvlan_validate(struct nlattr *tb[], struct nlattr *data[])
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index d552d2c7784..6af6b628175 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -39,6 +39,7 @@
 #include <linux/syscore_ops.h>
 #include <linux/tboot.h>
 #include <linux/dmi.h>
+#include <linux/pci-ats.h>
 #include <asm/cacheflush.h>
 #include <asm/iommu.h>
 #include "pci.h"
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 553d8ee55c1..42fae477651 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -13,6 +13,7 @@
 #include <linux/mutex.h>
 #include <linux/string.h>
 #include <linux/delay.h>
+#include <linux/pci-ats.h>
 #include "pci.h"
 
 #define VIRTFN_ID_LEN	16
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index a6ec200fe5e..4020025f854 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -250,15 +250,6 @@ struct pci_sriov {
 	u8 __iomem *mstate;	/* VF Migration State Array */
 };
 
-/* Address Translation Service */
-struct pci_ats {
-	int pos;	/* capability position */
-	int stu;	/* Smallest Translation Unit */
-	int qdep;	/* Invalidate Queue Depth */
-	int ref_cnt;	/* Physical Function reference count */
-	unsigned int is_enabled:1;	/* Enable bit is set */
-};
-
 #ifdef CONFIG_PCI_IOV
 extern int pci_iov_init(struct pci_dev *dev);
 extern void pci_iov_release(struct pci_dev *dev);
@@ -269,19 +260,6 @@ extern resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev,
 extern void pci_restore_iov_state(struct pci_dev *dev);
 extern int pci_iov_bus_range(struct pci_bus *bus);
 
-extern int pci_enable_ats(struct pci_dev *dev, int ps);
-extern void pci_disable_ats(struct pci_dev *dev);
-extern int pci_ats_queue_depth(struct pci_dev *dev);
-/**
- * pci_ats_enabled - query the ATS status
- * @dev: the PCI device
- *
- * Returns 1 if ATS capability is enabled, or 0 if not.
- */
-static inline int pci_ats_enabled(struct pci_dev *dev)
-{
-	return dev->ats && dev->ats->is_enabled;
-}
 #else
 static inline int pci_iov_init(struct pci_dev *dev)
 {
@@ -304,21 +282,6 @@ static inline int pci_iov_bus_range(struct pci_bus *bus)
 	return 0;
 }
 
-static inline int pci_enable_ats(struct pci_dev *dev, int ps)
-{
-	return -ENODEV;
-}
-static inline void pci_disable_ats(struct pci_dev *dev)
-{
-}
-static inline int pci_ats_queue_depth(struct pci_dev *dev)
-{
-	return -ENODEV;
-}
-static inline int pci_ats_enabled(struct pci_dev *dev)
-{
-	return 0;
-}
 #endif /* CONFIG_PCI_IOV */
 
 static inline resource_size_t pci_resource_alignment(struct pci_dev *dev,
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index e1878877399..42891726ea7 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -3,10 +3,10 @@
 #
 
 config RTC_LIB
-	tristate
+	bool
 
 menuconfig RTC_CLASS
-	tristate "Real Time Clock"
+	bool "Real Time Clock"
 	default n
 	depends on !S390
 	select RTC_LIB
@@ -15,9 +15,6 @@ menuconfig RTC_CLASS
  	  be allowed to plug one or more RTCs to your system. You will
 	  probably want to enable one or more of the interfaces below.
 
-	  This driver can also be built as a module. If so, the module
-	  will be called rtc-core.
-
 if RTC_CLASS
 
 config RTC_HCTOSYS
diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c
index 39013867cbd..4194e59e14c 100644
--- a/drivers/rtc/class.c
+++ b/drivers/rtc/class.c
@@ -41,26 +41,21 @@ static void rtc_device_release(struct device *dev)
  * system's wall clock; restore it on resume().
  */
 
-static struct timespec	delta;
 static time_t		oldtime;
+static struct timespec	oldts;
 
 static int rtc_suspend(struct device *dev, pm_message_t mesg)
 {
 	struct rtc_device	*rtc = to_rtc_device(dev);
 	struct rtc_time		tm;
-	struct timespec		ts = current_kernel_time();
 
 	if (strcmp(dev_name(&rtc->dev), CONFIG_RTC_HCTOSYS_DEVICE) != 0)
 		return 0;
 
 	rtc_read_time(rtc, &tm);
+	ktime_get_ts(&oldts);
 	rtc_tm_to_time(&tm, &oldtime);
 
-	/* RTC precision is 1 second; adjust delta for avg 1/2 sec err */
-	set_normalized_timespec(&delta,
-				ts.tv_sec - oldtime,
-				ts.tv_nsec - (NSEC_PER_SEC >> 1));
-
 	return 0;
 }
 
@@ -70,10 +65,12 @@ static int rtc_resume(struct device *dev)
 	struct rtc_time		tm;
 	time_t			newtime;
 	struct timespec		time;
+	struct timespec		newts;
 
 	if (strcmp(dev_name(&rtc->dev), CONFIG_RTC_HCTOSYS_DEVICE) != 0)
 		return 0;
 
+	ktime_get_ts(&newts);
 	rtc_read_time(rtc, &tm);
 	if (rtc_valid_tm(&tm) != 0) {
 		pr_debug("%s:  bogus resume time\n", dev_name(&rtc->dev));
@@ -85,15 +82,13 @@ static int rtc_resume(struct device *dev)
 			pr_debug("%s:  time travel!\n", dev_name(&rtc->dev));
 		return 0;
 	}
+	/* calculate the RTC time delta */
+	set_normalized_timespec(&time, newtime - oldtime, 0);
 
-	/* restore wall clock using delta against this RTC;
-	 * adjust again for avg 1/2 second RTC sampling error
-	 */
-	set_normalized_timespec(&time,
-				newtime + delta.tv_sec,
-				(NSEC_PER_SEC >> 1) + delta.tv_nsec);
-	do_settimeofday(&time);
+	/* subtract kernel time between rtc_suspend to rtc_resume */
+	time = timespec_sub(time, timespec_sub(newts, oldts));
 
+	timekeeping_inject_sleeptime(&time);
 	return 0;
 }
 
diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c
index 6f34963b3c6..7ad48585c5e 100644
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -662,7 +662,6 @@ static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out,
 static int ssb_pci_sprom_get(struct ssb_bus *bus,
 			     struct ssb_sprom *sprom)
 {
-	const struct ssb_sprom *fallback;
 	int err;
 	u16 *buf;
 
@@ -707,10 +706,17 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus,
 		if (err) {
 			/* All CRC attempts failed.
 			 * Maybe there is no SPROM on the device?
-			 * If we have a fallback, use that. */
-			fallback = ssb_get_fallback_sprom();
-			if (fallback) {
-				memcpy(sprom, fallback, sizeof(*sprom));
+			 * Now we ask the arch code if there is some sprom
+			 * available for this device in some other storage */
+			err = ssb_fill_sprom_with_fallback(bus, sprom);
+			if (err) {
+				ssb_printk(KERN_WARNING PFX "WARNING: Using"
+					   " fallback SPROM failed (err %d)\n",
+					   err);
+			} else {
+				ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
+					    " revision %d provided by"
+					    " platform.\n", sprom->revision);
 				err = 0;
 				goto out_free;
 			}
diff --git a/drivers/ssb/sprom.c b/drivers/ssb/sprom.c
index 5f34d7a3e3a..45ff0e3a382 100644
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
@@ -17,7 +17,7 @@
 #include <linux/slab.h>
 
 
-static const struct ssb_sprom *fallback_sprom;
+static int(*get_fallback_sprom)(struct ssb_bus *dev, struct ssb_sprom *out);
 
 
 static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len,
@@ -145,36 +145,43 @@ out:
 }
 
 /**
- * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found.
+ * ssb_arch_register_fallback_sprom - Registers a method providing a
+ * fallback SPROM if no SPROM is found.
  *
- * @sprom: The SPROM data structure to register.
+ * @sprom_callback: The callback function.
  *
- * With this function the architecture implementation may register a fallback
- * SPROM data structure. The fallback is only used for PCI based SSB devices,
- * where no valid SPROM can be found in the shadow registers.
+ * With this function the architecture implementation may register a
+ * callback handler which fills the SPROM data structure. The fallback is
+ * only used for PCI based SSB devices, where no valid SPROM can be found
+ * in the shadow registers.
  *
- * This function is useful for weird architectures that have a half-assed SSB device
- * hardwired to their PCI bus.
+ * This function is useful for weird architectures that have a half-assed
+ * SSB device hardwired to their PCI bus.
  *
- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently
- * don't use this fallback.
- * Architectures must provide the SPROM for native SSB devices anyway,
- * so the fallback also isn't used for native devices.
+ * Note that it does only work with PCI attached SSB devices. PCMCIA
+ * devices currently don't use this fallback.
+ * Architectures must provide the SPROM for native SSB devices anyway, so
+ * the fallback also isn't used for native devices.
  *
- * This function is available for architecture code, only. So it is not exported.
+ * This function is available for architecture code, only. So it is not
+ * exported.
  */
-int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom)
+int ssb_arch_register_fallback_sprom(int (*sprom_callback)(struct ssb_bus *bus,
+				     struct ssb_sprom *out))
 {
-	if (fallback_sprom)
+	if (get_fallback_sprom)
 		return -EEXIST;
-	fallback_sprom = sprom;
+	get_fallback_sprom = sprom_callback;
 
 	return 0;
 }
 
-const struct ssb_sprom *ssb_get_fallback_sprom(void)
+int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out)
 {
-	return fallback_sprom;
+	if (!get_fallback_sprom)
+		return -ENOENT;
+
+	return get_fallback_sprom(bus, out);
 }
 
 /* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h
index 0331139a726..77653014db0 100644
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -171,7 +171,8 @@ ssize_t ssb_attr_sprom_store(struct ssb_bus *bus,
 			     const char *buf, size_t count,
 			     int (*sprom_check_crc)(const u16 *sprom, size_t size),
 			     int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom));
-extern const struct ssb_sprom *ssb_get_fallback_sprom(void);
+extern int ssb_fill_sprom_with_fallback(struct ssb_bus *bus,
+					struct ssb_sprom *out);
 
 
 /* core.c */
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 80484af781e..b1f0f83b870 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1391,6 +1391,14 @@ config SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE
 	help
 	  Support for Console on the NWP serial ports.
 
+config SERIAL_LANTIQ
+	bool "Lantiq serial driver"
+	depends on LANTIQ
+	select SERIAL_CORE
+	select SERIAL_CORE_CONSOLE
+	help
+	  Support for console and UART on Lantiq SoCs.
+
 config SERIAL_QE
 	tristate "Freescale QUICC Engine serial port support"
 	depends on QUICC_ENGINE
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index fee0690ef8e..35276043d9d 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -94,3 +94,4 @@ obj-$(CONFIG_SERIAL_IFX6X60)  	+= ifx6x60.o
 obj-$(CONFIG_SERIAL_PCH_UART)	+= pch_uart.o
 obj-$(CONFIG_SERIAL_MSM_SMD)	+= msm_smd_tty.o
 obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o
+obj-$(CONFIG_SERIAL_LANTIQ)	+= lantiq.o
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
new file mode 100644
index 00000000000..58cf279ed87
--- /dev/null
+++ b/drivers/tty/serial/lantiq.c
@@ -0,0 +1,756 @@
+/*
+ *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Copyright (C) 2004 Infineon IFAP DC COM CPE
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2010 Thomas Langer, <thomas.langer@lantiq.com>
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <lantiq_soc.h>
+
+#define PORT_LTQ_ASC		111
+#define MAXPORTS		2
+#define UART_DUMMY_UER_RX	1
+#define DRVNAME			"ltq_asc"
+#ifdef __BIG_ENDIAN
+#define LTQ_ASC_TBUF		(0x0020 + 3)
+#define LTQ_ASC_RBUF		(0x0024 + 3)
+#else
+#define LTQ_ASC_TBUF		0x0020
+#define LTQ_ASC_RBUF		0x0024
+#endif
+#define LTQ_ASC_FSTAT		0x0048
+#define LTQ_ASC_WHBSTATE	0x0018
+#define LTQ_ASC_STATE		0x0014
+#define LTQ_ASC_IRNCR		0x00F8
+#define LTQ_ASC_CLC		0x0000
+#define LTQ_ASC_ID		0x0008
+#define LTQ_ASC_PISEL		0x0004
+#define LTQ_ASC_TXFCON		0x0044
+#define LTQ_ASC_RXFCON		0x0040
+#define LTQ_ASC_CON		0x0010
+#define LTQ_ASC_BG		0x0050
+#define LTQ_ASC_IRNREN		0x00F4
+
+#define ASC_IRNREN_TX		0x1
+#define ASC_IRNREN_RX		0x2
+#define ASC_IRNREN_ERR		0x4
+#define ASC_IRNREN_TX_BUF	0x8
+#define ASC_IRNCR_TIR		0x1
+#define ASC_IRNCR_RIR		0x2
+#define ASC_IRNCR_EIR		0x4
+
+#define ASCOPT_CSIZE		0x3
+#define TXFIFO_FL		1
+#define RXFIFO_FL		1
+#define ASCCLC_DISS		0x2
+#define ASCCLC_RMCMASK		0x0000FF00
+#define ASCCLC_RMCOFFSET	8
+#define ASCCON_M_8ASYNC		0x0
+#define ASCCON_M_7ASYNC		0x2
+#define ASCCON_ODD		0x00000020
+#define ASCCON_STP		0x00000080
+#define ASCCON_BRS		0x00000100
+#define ASCCON_FDE		0x00000200
+#define ASCCON_R		0x00008000
+#define ASCCON_FEN		0x00020000
+#define ASCCON_ROEN		0x00080000
+#define ASCCON_TOEN		0x00100000
+#define ASCSTATE_PE		0x00010000
+#define ASCSTATE_FE		0x00020000
+#define ASCSTATE_ROE		0x00080000
+#define ASCSTATE_ANY		(ASCSTATE_ROE|ASCSTATE_PE|ASCSTATE_FE)
+#define ASCWHBSTATE_CLRREN	0x00000001
+#define ASCWHBSTATE_SETREN	0x00000002
+#define ASCWHBSTATE_CLRPE	0x00000004
+#define ASCWHBSTATE_CLRFE	0x00000008
+#define ASCWHBSTATE_CLRROE	0x00000020
+#define ASCTXFCON_TXFEN		0x0001
+#define ASCTXFCON_TXFFLU	0x0002
+#define ASCTXFCON_TXFITLMASK	0x3F00
+#define ASCTXFCON_TXFITLOFF	8
+#define ASCRXFCON_RXFEN		0x0001
+#define ASCRXFCON_RXFFLU	0x0002
+#define ASCRXFCON_RXFITLMASK	0x3F00
+#define ASCRXFCON_RXFITLOFF	8
+#define ASCFSTAT_RXFFLMASK	0x003F
+#define ASCFSTAT_TXFFLMASK	0x3F00
+#define ASCFSTAT_TXFREEMASK	0x3F000000
+#define ASCFSTAT_TXFREEOFF	24
+
+static void lqasc_tx_chars(struct uart_port *port);
+static struct ltq_uart_port *lqasc_port[MAXPORTS];
+static struct uart_driver lqasc_reg;
+static DEFINE_SPINLOCK(ltq_asc_lock);
+
+struct ltq_uart_port {
+	struct uart_port	port;
+	struct clk		*clk;
+	unsigned int		tx_irq;
+	unsigned int		rx_irq;
+	unsigned int		err_irq;
+};
+
+static inline struct
+ltq_uart_port *to_ltq_uart_port(struct uart_port *port)
+{
+	return container_of(port, struct ltq_uart_port, port);
+}
+
+static void
+lqasc_stop_tx(struct uart_port *port)
+{
+	return;
+}
+
+static void
+lqasc_start_tx(struct uart_port *port)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&ltq_asc_lock, flags);
+	lqasc_tx_chars(port);
+	spin_unlock_irqrestore(&ltq_asc_lock, flags);
+	return;
+}
+
+static void
+lqasc_stop_rx(struct uart_port *port)
+{
+	ltq_w32(ASCWHBSTATE_CLRREN, port->membase + LTQ_ASC_WHBSTATE);
+}
+
+static void
+lqasc_enable_ms(struct uart_port *port)
+{
+}
+
+static int
+lqasc_rx_chars(struct uart_port *port)
+{
+	struct tty_struct *tty = tty_port_tty_get(&port->state->port);
+	unsigned int ch = 0, rsr = 0, fifocnt;
+
+	if (!tty) {
+		dev_dbg(port->dev, "%s:tty is busy now", __func__);
+		return -EBUSY;
+	}
+	fifocnt =
+		ltq_r32(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_RXFFLMASK;
+	while (fifocnt--) {
+		u8 flag = TTY_NORMAL;
+		ch = ltq_r8(port->membase + LTQ_ASC_RBUF);
+		rsr = (ltq_r32(port->membase + LTQ_ASC_STATE)
+			& ASCSTATE_ANY) | UART_DUMMY_UER_RX;
+		tty_flip_buffer_push(tty);
+		port->icount.rx++;
+
+		/*
+		 * Note that the error handling code is
+		 * out of the main execution path
+		 */
+		if (rsr & ASCSTATE_ANY) {
+			if (rsr & ASCSTATE_PE) {
+				port->icount.parity++;
+				ltq_w32_mask(0, ASCWHBSTATE_CLRPE,
+					port->membase + LTQ_ASC_WHBSTATE);
+			} else if (rsr & ASCSTATE_FE) {
+				port->icount.frame++;
+				ltq_w32_mask(0, ASCWHBSTATE_CLRFE,
+					port->membase + LTQ_ASC_WHBSTATE);
+			}
+			if (rsr & ASCSTATE_ROE) {
+				port->icount.overrun++;
+				ltq_w32_mask(0, ASCWHBSTATE_CLRROE,
+					port->membase + LTQ_ASC_WHBSTATE);
+			}
+
+			rsr &= port->read_status_mask;
+
+			if (rsr & ASCSTATE_PE)
+				flag = TTY_PARITY;
+			else if (rsr & ASCSTATE_FE)
+				flag = TTY_FRAME;
+		}
+
+		if ((rsr & port->ignore_status_mask) == 0)
+			tty_insert_flip_char(tty, ch, flag);
+
+		if (rsr & ASCSTATE_ROE)
+			/*
+			 * Overrun is special, since it's reported
+			 * immediately, and doesn't affect the current
+			 * character
+			 */
+			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+	}
+	if (ch != 0)
+		tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
+	return 0;
+}
+
+static void
+lqasc_tx_chars(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->state->xmit;
+	if (uart_tx_stopped(port)) {
+		lqasc_stop_tx(port);
+		return;
+	}
+
+	while (((ltq_r32(port->membase + LTQ_ASC_FSTAT) &
+		ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF) != 0) {
+		if (port->x_char) {
+			ltq_w8(port->x_char, port->membase + LTQ_ASC_TBUF);
+			port->icount.tx++;
+			port->x_char = 0;
+			continue;
+		}
+
+		if (uart_circ_empty(xmit))
+			break;
+
+		ltq_w8(port->state->xmit.buf[port->state->xmit.tail],
+			port->membase + LTQ_ASC_TBUF);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+	}
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+}
+
+static irqreturn_t
+lqasc_tx_int(int irq, void *_port)
+{
+	unsigned long flags;
+	struct uart_port *port = (struct uart_port *)_port;
+	spin_lock_irqsave(&ltq_asc_lock, flags);
+	ltq_w32(ASC_IRNCR_TIR, port->membase + LTQ_ASC_IRNCR);
+	spin_unlock_irqrestore(&ltq_asc_lock, flags);
+	lqasc_start_tx(port);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t
+lqasc_err_int(int irq, void *_port)
+{
+	unsigned long flags;
+	struct uart_port *port = (struct uart_port *)_port;
+	spin_lock_irqsave(&ltq_asc_lock, flags);
+	/* clear any pending interrupts */
+	ltq_w32_mask(0, ASCWHBSTATE_CLRPE | ASCWHBSTATE_CLRFE |
+		ASCWHBSTATE_CLRROE, port->membase + LTQ_ASC_WHBSTATE);
+	spin_unlock_irqrestore(&ltq_asc_lock, flags);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t
+lqasc_rx_int(int irq, void *_port)
+{
+	unsigned long flags;
+	struct uart_port *port = (struct uart_port *)_port;
+	spin_lock_irqsave(&ltq_asc_lock, flags);
+	ltq_w32(ASC_IRNCR_RIR, port->membase + LTQ_ASC_IRNCR);
+	lqasc_rx_chars(port);
+	spin_unlock_irqrestore(&ltq_asc_lock, flags);
+	return IRQ_HANDLED;
+}
+
+static unsigned int
+lqasc_tx_empty(struct uart_port *port)
+{
+	int status;
+	status = ltq_r32(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_TXFFLMASK;
+	return status ? 0 : TIOCSER_TEMT;
+}
+
+static unsigned int
+lqasc_get_mctrl(struct uart_port *port)
+{
+	return TIOCM_CTS | TIOCM_CAR | TIOCM_DSR;
+}
+
+static void
+lqasc_set_mctrl(struct uart_port *port, u_int mctrl)
+{
+}
+
+static void
+lqasc_break_ctl(struct uart_port *port, int break_state)
+{
+}
+
+static int
+lqasc_startup(struct uart_port *port)
+{
+	struct ltq_uart_port *ltq_port = to_ltq_uart_port(port);
+	int retval;
+
+	port->uartclk = clk_get_rate(ltq_port->clk);
+
+	ltq_w32_mask(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET),
+		port->membase + LTQ_ASC_CLC);
+
+	ltq_w32(0, port->membase + LTQ_ASC_PISEL);
+	ltq_w32(
+		((TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) |
+		ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU,
+		port->membase + LTQ_ASC_TXFCON);
+	ltq_w32(
+		((RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK)
+		| ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU,
+		port->membase + LTQ_ASC_RXFCON);
+	/* make sure other settings are written to hardware before
+	 * setting enable bits
+	 */
+	wmb();
+	ltq_w32_mask(0, ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_TOEN |
+		ASCCON_ROEN, port->membase + LTQ_ASC_CON);
+
+	retval = request_irq(ltq_port->tx_irq, lqasc_tx_int,
+		IRQF_DISABLED, "asc_tx", port);
+	if (retval) {
+		pr_err("failed to request lqasc_tx_int\n");
+		return retval;
+	}
+
+	retval = request_irq(ltq_port->rx_irq, lqasc_rx_int,
+		IRQF_DISABLED, "asc_rx", port);
+	if (retval) {
+		pr_err("failed to request lqasc_rx_int\n");
+		goto err1;
+	}
+
+	retval = request_irq(ltq_port->err_irq, lqasc_err_int,
+		IRQF_DISABLED, "asc_err", port);
+	if (retval) {
+		pr_err("failed to request lqasc_err_int\n");
+		goto err2;
+	}
+
+	ltq_w32(ASC_IRNREN_RX | ASC_IRNREN_ERR | ASC_IRNREN_TX,
+		port->membase + LTQ_ASC_IRNREN);
+	return 0;
+
+err2:
+	free_irq(ltq_port->rx_irq, port);
+err1:
+	free_irq(ltq_port->tx_irq, port);
+	return retval;
+}
+
+static void
+lqasc_shutdown(struct uart_port *port)
+{
+	struct ltq_uart_port *ltq_port = to_ltq_uart_port(port);
+	free_irq(ltq_port->tx_irq, port);
+	free_irq(ltq_port->rx_irq, port);
+	free_irq(ltq_port->err_irq, port);
+
+	ltq_w32(0, port->membase + LTQ_ASC_CON);
+	ltq_w32_mask(ASCRXFCON_RXFEN, ASCRXFCON_RXFFLU,
+		port->membase + LTQ_ASC_RXFCON);
+	ltq_w32_mask(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU,
+		port->membase + LTQ_ASC_TXFCON);
+}
+
+static void
+lqasc_set_termios(struct uart_port *port,
+	struct ktermios *new, struct ktermios *old)
+{
+	unsigned int cflag;
+	unsigned int iflag;
+	unsigned int divisor;
+	unsigned int baud;
+	unsigned int con = 0;
+	unsigned long flags;
+
+	cflag = new->c_cflag;
+	iflag = new->c_iflag;
+
+	switch (cflag & CSIZE) {
+	case CS7:
+		con = ASCCON_M_7ASYNC;
+		break;
+
+	case CS5:
+	case CS6:
+	default:
+		new->c_cflag &= ~ CSIZE;
+		new->c_cflag |= CS8;
+		con = ASCCON_M_8ASYNC;
+		break;
+	}
+
+	cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
+
+	if (cflag & CSTOPB)
+		con |= ASCCON_STP;
+
+	if (cflag & PARENB) {
+		if (!(cflag & PARODD))
+			con &= ~ASCCON_ODD;
+		else
+			con |= ASCCON_ODD;
+	}
+
+	port->read_status_mask = ASCSTATE_ROE;
+	if (iflag & INPCK)
+		port->read_status_mask |= ASCSTATE_FE | ASCSTATE_PE;
+
+	port->ignore_status_mask = 0;
+	if (iflag & IGNPAR)
+		port->ignore_status_mask |= ASCSTATE_FE | ASCSTATE_PE;
+
+	if (iflag & IGNBRK) {
+		/*
+		 * If we're ignoring parity and break indicators,
+		 * ignore overruns too (for real raw support).
+		 */
+		if (iflag & IGNPAR)
+			port->ignore_status_mask |= ASCSTATE_ROE;
+	}
+
+	if ((cflag & CREAD) == 0)
+		port->ignore_status_mask |= UART_DUMMY_UER_RX;
+
+	/* set error signals  - framing, parity  and overrun, enable receiver */
+	con |= ASCCON_FEN | ASCCON_TOEN | ASCCON_ROEN;
+
+	spin_lock_irqsave(&ltq_asc_lock, flags);
+
+	/* set up CON */
+	ltq_w32_mask(0, con, port->membase + LTQ_ASC_CON);
+
+	/* Set baud rate - take a divider of 2 into account */
+	baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
+	divisor = uart_get_divisor(port, baud);
+	divisor = divisor / 2 - 1;
+
+	/* disable the baudrate generator */
+	ltq_w32_mask(ASCCON_R, 0, port->membase + LTQ_ASC_CON);
+
+	/* make sure the fractional divider is off */
+	ltq_w32_mask(ASCCON_FDE, 0, port->membase + LTQ_ASC_CON);
+
+	/* set up to use divisor of 2 */
+	ltq_w32_mask(ASCCON_BRS, 0, port->membase + LTQ_ASC_CON);
+
+	/* now we can write the new baudrate into the register */
+	ltq_w32(divisor, port->membase + LTQ_ASC_BG);
+
+	/* turn the baudrate generator back on */
+	ltq_w32_mask(0, ASCCON_R, port->membase + LTQ_ASC_CON);
+
+	/* enable rx */
+	ltq_w32(ASCWHBSTATE_SETREN, port->membase + LTQ_ASC_WHBSTATE);
+
+	spin_unlock_irqrestore(&ltq_asc_lock, flags);
+
+	/* Don't rewrite B0 */
+        if (tty_termios_baud_rate(new))
+		tty_termios_encode_baud_rate(new, baud, baud);
+}
+
+static const char*
+lqasc_type(struct uart_port *port)
+{
+	if (port->type == PORT_LTQ_ASC)
+		return DRVNAME;
+	else
+		return NULL;
+}
+
+static void
+lqasc_release_port(struct uart_port *port)
+{
+	if (port->flags & UPF_IOREMAP) {
+		iounmap(port->membase);
+		port->membase = NULL;
+	}
+}
+
+static int
+lqasc_request_port(struct uart_port *port)
+{
+	struct platform_device *pdev = to_platform_device(port->dev);
+	struct resource *res;
+	int size;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "cannot obtain I/O memory region");
+		return -ENODEV;
+	}
+	size = resource_size(res);
+
+	res = devm_request_mem_region(&pdev->dev, res->start,
+		size, dev_name(&pdev->dev));
+	if (!res) {
+		dev_err(&pdev->dev, "cannot request I/O memory region");
+		return -EBUSY;
+	}
+
+	if (port->flags & UPF_IOREMAP) {
+		port->membase = devm_ioremap_nocache(&pdev->dev,
+			port->mapbase, size);
+		if (port->membase == NULL)
+			return -ENOMEM;
+	}
+	return 0;
+}
+
+static void
+lqasc_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE) {
+		port->type = PORT_LTQ_ASC;
+		lqasc_request_port(port);
+	}
+}
+
+static int
+lqasc_verify_port(struct uart_port *port,
+	struct serial_struct *ser)
+{
+	int ret = 0;
+	if (ser->type != PORT_UNKNOWN && ser->type != PORT_LTQ_ASC)
+		ret = -EINVAL;
+	if (ser->irq < 0 || ser->irq >= NR_IRQS)
+		ret = -EINVAL;
+	if (ser->baud_base < 9600)
+		ret = -EINVAL;
+	return ret;
+}
+
+static struct uart_ops lqasc_pops = {
+	.tx_empty =	lqasc_tx_empty,
+	.set_mctrl =	lqasc_set_mctrl,
+	.get_mctrl =	lqasc_get_mctrl,
+	.stop_tx =	lqasc_stop_tx,
+	.start_tx =	lqasc_start_tx,
+	.stop_rx =	lqasc_stop_rx,
+	.enable_ms =	lqasc_enable_ms,
+	.break_ctl =	lqasc_break_ctl,
+	.startup =	lqasc_startup,
+	.shutdown =	lqasc_shutdown,
+	.set_termios =	lqasc_set_termios,
+	.type =		lqasc_type,
+	.release_port =	lqasc_release_port,
+	.request_port =	lqasc_request_port,
+	.config_port =	lqasc_config_port,
+	.verify_port =	lqasc_verify_port,
+};
+
+static void
+lqasc_console_putchar(struct uart_port *port, int ch)
+{
+	int fifofree;
+
+	if (!port->membase)
+		return;
+
+	do {
+		fifofree = (ltq_r32(port->membase + LTQ_ASC_FSTAT)
+			& ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF;
+	} while (fifofree == 0);
+	ltq_w8(ch, port->membase + LTQ_ASC_TBUF);
+}
+
+
+static void
+lqasc_console_write(struct console *co, const char *s, u_int count)
+{
+	struct ltq_uart_port *ltq_port;
+	struct uart_port *port;
+	unsigned long flags;
+
+	if (co->index >= MAXPORTS)
+		return;
+
+	ltq_port = lqasc_port[co->index];
+	if (!ltq_port)
+		return;
+
+	port = &ltq_port->port;
+
+	spin_lock_irqsave(&ltq_asc_lock, flags);
+	uart_console_write(port, s, count, lqasc_console_putchar);
+	spin_unlock_irqrestore(&ltq_asc_lock, flags);
+}
+
+static int __init
+lqasc_console_setup(struct console *co, char *options)
+{
+	struct ltq_uart_port *ltq_port;
+	struct uart_port *port;
+	int baud = 115200;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	if (co->index >= MAXPORTS)
+		return -ENODEV;
+
+	ltq_port = lqasc_port[co->index];
+	if (!ltq_port)
+		return -ENODEV;
+
+	port = &ltq_port->port;
+
+	port->uartclk = clk_get_rate(ltq_port->clk);
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct console lqasc_console = {
+	.name =		"ttyLTQ",
+	.write =	lqasc_console_write,
+	.device =	uart_console_device,
+	.setup =	lqasc_console_setup,
+	.flags =	CON_PRINTBUFFER,
+	.index =	-1,
+	.data =		&lqasc_reg,
+};
+
+static int __init
+lqasc_console_init(void)
+{
+	register_console(&lqasc_console);
+	return 0;
+}
+console_initcall(lqasc_console_init);
+
+static struct uart_driver lqasc_reg = {
+	.owner =	THIS_MODULE,
+	.driver_name =	DRVNAME,
+	.dev_name =	"ttyLTQ",
+	.major =	0,
+	.minor =	0,
+	.nr =		MAXPORTS,
+	.cons =		&lqasc_console,
+};
+
+static int __init
+lqasc_probe(struct platform_device *pdev)
+{
+	struct ltq_uart_port *ltq_port;
+	struct uart_port *port;
+	struct resource *mmres, *irqres;
+	int tx_irq, rx_irq, err_irq;
+	struct clk *clk;
+	int ret;
+
+	mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!mmres || !irqres)
+		return -ENODEV;
+
+	if (pdev->id >= MAXPORTS)
+		return -EBUSY;
+
+	if (lqasc_port[pdev->id] != NULL)
+		return -EBUSY;
+
+	clk = clk_get(&pdev->dev, "fpi");
+	if (IS_ERR(clk)) {
+		pr_err("failed to get fpi clk\n");
+		return -ENOENT;
+	}
+
+	tx_irq = platform_get_irq_byname(pdev, "tx");
+	rx_irq = platform_get_irq_byname(pdev, "rx");
+	err_irq = platform_get_irq_byname(pdev, "err");
+	if ((tx_irq < 0) | (rx_irq < 0) | (err_irq < 0))
+		return -ENODEV;
+
+	ltq_port = kzalloc(sizeof(struct ltq_uart_port), GFP_KERNEL);
+	if (!ltq_port)
+		return -ENOMEM;
+
+	port = &ltq_port->port;
+
+	port->iotype	= SERIAL_IO_MEM;
+	port->flags	= ASYNC_BOOT_AUTOCONF | UPF_IOREMAP;
+	port->ops	= &lqasc_pops;
+	port->fifosize	= 16;
+	port->type	= PORT_LTQ_ASC,
+	port->line	= pdev->id;
+	port->dev	= &pdev->dev;
+
+	port->irq	= tx_irq; /* unused, just to be backward-compatibe */
+	port->mapbase	= mmres->start;
+
+	ltq_port->clk	= clk;
+
+	ltq_port->tx_irq = tx_irq;
+	ltq_port->rx_irq = rx_irq;
+	ltq_port->err_irq = err_irq;
+
+	lqasc_port[pdev->id] = ltq_port;
+	platform_set_drvdata(pdev, ltq_port);
+
+	ret = uart_add_one_port(&lqasc_reg, port);
+
+	return ret;
+}
+
+static struct platform_driver lqasc_driver = {
+	.driver		= {
+		.name	= DRVNAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+int __init
+init_lqasc(void)
+{
+	int ret;
+
+	ret = uart_register_driver(&lqasc_reg);
+	if (ret != 0)
+		return ret;
+
+	ret = platform_driver_probe(&lqasc_driver, lqasc_probe);
+	if (ret != 0)
+		uart_unregister_driver(&lqasc_reg);
+
+	return ret;
+}
+
+module_init(init_lqasc);
+
+MODULE_DESCRIPTION("Lantiq serial port driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index 51fe1795d5a..d2efe823c20 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -381,7 +381,13 @@ static int uio_get_minor(struct uio_device *idev)
 			retval = -ENOMEM;
 		goto exit;
 	}
-	idev->minor = id & MAX_ID_MASK;
+	if (id < UIO_MAX_DEVICES) {
+		idev->minor = id;
+	} else {
+		dev_err(idev->dev, "too many uio devices\n");
+		retval = -EINVAL;
+		idr_remove(&uio_idr, id);
+	}
 exit:
 	mutex_unlock(&minor_lock);
 	return retval;
@@ -587,14 +593,12 @@ static ssize_t uio_write(struct file *filep, const char __user *buf,
 
 static int uio_find_mem_index(struct vm_area_struct *vma)
 {
-	int mi;
 	struct uio_device *idev = vma->vm_private_data;
 
-	for (mi = 0; mi < MAX_UIO_MAPS; mi++) {
-		if (idev->info->mem[mi].size == 0)
+	if (vma->vm_pgoff < MAX_UIO_MAPS) {
+		if (idev->info->mem[vma->vm_pgoff].size == 0)
 			return -1;
-		if (vma->vm_pgoff == mi)
-			return mi;
+		return (int)vma->vm_pgoff;
 	}
 	return -1;
 }
diff --git a/drivers/uio/uio_netx.c b/drivers/uio/uio_netx.c
index 5ffdb483b01..a879fd5741f 100644
--- a/drivers/uio/uio_netx.c
+++ b/drivers/uio/uio_netx.c
@@ -18,6 +18,9 @@
 
 #define PCI_VENDOR_ID_HILSCHER		0x15CF
 #define PCI_DEVICE_ID_HILSCHER_NETX	0x0000
+#define PCI_DEVICE_ID_HILSCHER_NETPLC	0x0010
+#define PCI_SUBDEVICE_ID_NETPLC_RAM	0x0000
+#define PCI_SUBDEVICE_ID_NETPLC_FLASH	0x0001
 #define PCI_SUBDEVICE_ID_NXSB_PCA	0x3235
 #define PCI_SUBDEVICE_ID_NXPCA		0x3335
 
@@ -66,6 +69,10 @@ static int __devinit netx_pci_probe(struct pci_dev *dev,
 		bar = 0;
 		info->name = "netx";
 		break;
+	case PCI_DEVICE_ID_HILSCHER_NETPLC:
+		bar = 0;
+		info->name = "netplc";
+		break;
 	default:
 		bar = 2;
 		info->name = "netx_plx";
@@ -134,6 +141,18 @@ static struct pci_device_id netx_pci_ids[] = {
 		.subdevice =	0,
 	},
 	{
+		.vendor =       PCI_VENDOR_ID_HILSCHER,
+		.device =       PCI_DEVICE_ID_HILSCHER_NETPLC,
+		.subvendor =    PCI_VENDOR_ID_HILSCHER,
+		.subdevice =    PCI_SUBDEVICE_ID_NETPLC_RAM,
+	},
+	{
+		.vendor =       PCI_VENDOR_ID_HILSCHER,
+		.device =       PCI_DEVICE_ID_HILSCHER_NETPLC,
+		.subvendor =    PCI_VENDOR_ID_HILSCHER,
+		.subdevice =    PCI_SUBDEVICE_ID_NETPLC_FLASH,
+	},
+	{
 		.vendor =	PCI_VENDOR_ID_PLX,
 		.device =	PCI_DEVICE_ID_PLX_9030,
 		.subvendor =	PCI_VENDOR_ID_PLX,
diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c
index 7174d518b8a..0f424af7f10 100644
--- a/drivers/uio/uio_pdrv_genirq.c
+++ b/drivers/uio/uio_pdrv_genirq.c
@@ -189,6 +189,10 @@ static int uio_pdrv_genirq_remove(struct platform_device *pdev)
 
 	uio_unregister_device(priv->uioinfo);
 	pm_runtime_disable(&pdev->dev);
+
+	priv->uioinfo->handler = NULL;
+	priv->uioinfo->irqcontrol = NULL;
+
 	kfree(priv);
 	return 0;
 }
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index 2ab29124163..7aa4eea930f 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -4,7 +4,7 @@
  * Author: Michael S. Tsirkin <mst@redhat.com>
  *
  * Inspiration, some code, and most witty comments come from
- * Documentation/lguest/lguest.c, by Rusty Russell
+ * Documentation/virtual/lguest/lguest.c, by Rusty Russell
  *
  * This work is licensed under the terms of the GNU GPL, version 2.
  *
diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c
index 5b2b5ef4edb..64e41f5448c 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/atafb.c
@@ -3117,7 +3117,7 @@ int __init atafb_init(void)
 			atafb_ops.fb_setcolreg = &falcon_setcolreg;
 			error = request_irq(IRQ_AUTO_4, falcon_vbl_switcher,
 					    IRQ_TYPE_PRIO,
-					    "framebuffer/modeswitch",
+					    "framebuffer:modeswitch",
 					    falcon_vbl_switcher);
 			if (error)
 				return error;
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 1b0f98bc51b..022f9eb0b7b 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -990,6 +990,12 @@ config BCM63XX_WDT
 	  To compile this driver as a loadable module, choose M here.
 	  The module will be called bcm63xx_wdt.
 
+config LANTIQ_WDT
+	tristate "Lantiq SoC watchdog"
+	depends on LANTIQ
+	help
+	  Hardware driver for the Lantiq SoC Watchdog Timer.
+
 # PARISC Architecture
 
 # POWERPC Architecture
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 3f8608b922a..ed26f7094e4 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -123,6 +123,7 @@ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
 obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
 obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
 octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
+obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
 
 # PARISC Architecture
 
diff --git a/drivers/watchdog/lantiq_wdt.c b/drivers/watchdog/lantiq_wdt.c
new file mode 100644
index 00000000000..7d82adac1cb
--- /dev/null
+++ b/drivers/watchdog/lantiq_wdt.c
@@ -0,0 +1,261 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ *  Based on EP93xx wdt driver
+ */
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <lantiq.h>
+
+/* Section 3.4 of the datasheet
+ * The password sequence protects the WDT control register from unintended
+ * write actions, which might cause malfunction of the WDT.
+ *
+ * essentially the following two magic passwords need to be written to allow
+ * IO access to the WDT core
+ */
+#define LTQ_WDT_PW1		0x00BE0000
+#define LTQ_WDT_PW2		0x00DC0000
+
+#define LTQ_WDT_CR		0x0	/* watchdog control register */
+#define LTQ_WDT_SR		0x8	/* watchdog status register */
+
+#define LTQ_WDT_SR_EN		(0x1 << 31)	/* enable bit */
+#define LTQ_WDT_SR_PWD		(0x3 << 26)	/* turn on power */
+#define LTQ_WDT_SR_CLKDIV	(0x3 << 24)	/* turn on clock and set */
+						/* divider to 0x40000 */
+#define LTQ_WDT_DIVIDER		0x40000
+#define LTQ_MAX_TIMEOUT		((1 << 16) - 1)	/* the reload field is 16 bit */
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+
+static void __iomem *ltq_wdt_membase;
+static unsigned long ltq_io_region_clk_rate;
+
+static unsigned long ltq_wdt_bootstatus;
+static unsigned long ltq_wdt_in_use;
+static int ltq_wdt_timeout = 30;
+static int ltq_wdt_ok_to_close;
+
+static void
+ltq_wdt_enable(void)
+{
+	ltq_wdt_timeout = ltq_wdt_timeout *
+			(ltq_io_region_clk_rate / LTQ_WDT_DIVIDER) + 0x1000;
+	if (ltq_wdt_timeout > LTQ_MAX_TIMEOUT)
+		ltq_wdt_timeout = LTQ_MAX_TIMEOUT;
+
+	/* write the first password magic */
+	ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR);
+	/* write the second magic plus the configuration and new timeout */
+	ltq_w32(LTQ_WDT_SR_EN | LTQ_WDT_SR_PWD | LTQ_WDT_SR_CLKDIV |
+		LTQ_WDT_PW2 | ltq_wdt_timeout, ltq_wdt_membase + LTQ_WDT_CR);
+}
+
+static void
+ltq_wdt_disable(void)
+{
+	/* write the first password magic */
+	ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR);
+	/* write the second password magic with no config
+	 * this turns the watchdog off
+	 */
+	ltq_w32(LTQ_WDT_PW2, ltq_wdt_membase + LTQ_WDT_CR);
+}
+
+static ssize_t
+ltq_wdt_write(struct file *file, const char __user *data,
+		size_t len, loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			ltq_wdt_ok_to_close = 0;
+			for (i = 0; i != len; i++) {
+				char c;
+
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					ltq_wdt_ok_to_close = 1;
+				else
+					ltq_wdt_ok_to_close = 0;
+			}
+		}
+		ltq_wdt_enable();
+	}
+
+	return len;
+}
+
+static struct watchdog_info ident = {
+	.options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+			WDIOF_CARDRESET,
+	.identity = "ltq_wdt",
+};
+
+static long
+ltq_wdt_ioctl(struct file *file,
+		unsigned int cmd, unsigned long arg)
+{
+	int ret = -ENOTTY;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		ret = copy_to_user((struct watchdog_info __user *)arg, &ident,
+				sizeof(ident)) ? -EFAULT : 0;
+		break;
+
+	case WDIOC_GETBOOTSTATUS:
+		ret = put_user(ltq_wdt_bootstatus, (int __user *)arg);
+		break;
+
+	case WDIOC_GETSTATUS:
+		ret = put_user(0, (int __user *)arg);
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		ret = get_user(ltq_wdt_timeout, (int __user *)arg);
+		if (!ret)
+			ltq_wdt_enable();
+		/* intentional drop through */
+	case WDIOC_GETTIMEOUT:
+		ret = put_user(ltq_wdt_timeout, (int __user *)arg);
+		break;
+
+	case WDIOC_KEEPALIVE:
+		ltq_wdt_enable();
+		ret = 0;
+		break;
+	}
+	return ret;
+}
+
+static int
+ltq_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &ltq_wdt_in_use))
+		return -EBUSY;
+	ltq_wdt_in_use = 1;
+	ltq_wdt_enable();
+
+	return nonseekable_open(inode, file);
+}
+
+static int
+ltq_wdt_release(struct inode *inode, struct file *file)
+{
+	if (ltq_wdt_ok_to_close)
+		ltq_wdt_disable();
+	else
+		pr_err("ltq_wdt: watchdog closed without warning\n");
+	ltq_wdt_ok_to_close = 0;
+	clear_bit(0, &ltq_wdt_in_use);
+
+	return 0;
+}
+
+static const struct file_operations ltq_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.write		= ltq_wdt_write,
+	.unlocked_ioctl	= ltq_wdt_ioctl,
+	.open		= ltq_wdt_open,
+	.release	= ltq_wdt_release,
+	.llseek		= no_llseek,
+};
+
+static struct miscdevice ltq_wdt_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &ltq_wdt_fops,
+};
+
+static int __init
+ltq_wdt_probe(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct clk *clk;
+
+	if (!res) {
+		dev_err(&pdev->dev, "cannot obtain I/O memory region");
+		return -ENOENT;
+	}
+	res = devm_request_mem_region(&pdev->dev, res->start,
+		resource_size(res), dev_name(&pdev->dev));
+	if (!res) {
+		dev_err(&pdev->dev, "cannot request I/O memory region");
+		return -EBUSY;
+	}
+	ltq_wdt_membase = devm_ioremap_nocache(&pdev->dev, res->start,
+		resource_size(res));
+	if (!ltq_wdt_membase) {
+		dev_err(&pdev->dev, "cannot remap I/O memory region\n");
+		return -ENOMEM;
+	}
+
+	/* we do not need to enable the clock as it is always running */
+	clk = clk_get(&pdev->dev, "io");
+	WARN_ON(!clk);
+	ltq_io_region_clk_rate = clk_get_rate(clk);
+	clk_put(clk);
+
+	if (ltq_reset_cause() == LTQ_RST_CAUSE_WDTRST)
+		ltq_wdt_bootstatus = WDIOF_CARDRESET;
+
+	return misc_register(&ltq_wdt_miscdev);
+}
+
+static int __devexit
+ltq_wdt_remove(struct platform_device *pdev)
+{
+	misc_deregister(&ltq_wdt_miscdev);
+
+	if (ltq_wdt_membase)
+		iounmap(ltq_wdt_membase);
+
+	return 0;
+}
+
+
+static struct platform_driver ltq_wdt_driver = {
+	.remove = __devexit_p(ltq_wdt_remove),
+	.driver = {
+		.name = "ltq_wdt",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init
+init_ltq_wdt(void)
+{
+	return platform_driver_probe(&ltq_wdt_driver, ltq_wdt_probe);
+}
+
+static void __exit
+exit_ltq_wdt(void)
+{
+	return platform_driver_unregister(&ltq_wdt_driver);
+}
+
+module_init(init_ltq_wdt);
+module_exit(exit_ltq_wdt);
+
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
+
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("Lantiq SoC Watchdog");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c
index 5ec5ac1f787..1479dc4d612 100644
--- a/drivers/watchdog/mtx-1_wdt.c
+++ b/drivers/watchdog/mtx-1_wdt.c
@@ -66,6 +66,7 @@ static struct {
 	int default_ticks;
 	unsigned long inuse;
 	unsigned gpio;
+	int gstate;
 } mtx1_wdt_device;
 
 static void mtx1_wdt_trigger(unsigned long unused)
@@ -75,13 +76,13 @@ static void mtx1_wdt_trigger(unsigned long unused)
 	spin_lock(&mtx1_wdt_device.lock);
 	if (mtx1_wdt_device.running)
 		ticks--;
-	/*
-	 * toggle GPIO2_15
-	 */
-	tmp = au_readl(GPIO2_DIR);
-	tmp = (tmp & ~(1 << mtx1_wdt_device.gpio)) |
-	      ((~tmp) & (1 << mtx1_wdt_device.gpio));
-	au_writel(tmp, GPIO2_DIR);
+
+	/* toggle wdt gpio */
+	mtx1_wdt_device.gstate = ~mtx1_wdt_device.gstate;
+	if (mtx1_wdt_device.gstate)
+		gpio_direction_output(mtx1_wdt_device.gpio, 1);
+	else
+		gpio_direction_input(mtx1_wdt_device.gpio);
 
 	if (mtx1_wdt_device.queue && ticks)
 		mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
@@ -103,7 +104,8 @@ static void mtx1_wdt_start(void)
 	spin_lock_irqsave(&mtx1_wdt_device.lock, flags);
 	if (!mtx1_wdt_device.queue) {
 		mtx1_wdt_device.queue = 1;
-		gpio_set_value(mtx1_wdt_device.gpio, 1);
+		mtx1_wdt_device.gstate = 1;
+		gpio_direction_output(mtx1_wdt_device.gpio, 1);
 		mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
 	}
 	mtx1_wdt_device.running++;
@@ -117,7 +119,8 @@ static int mtx1_wdt_stop(void)
 	spin_lock_irqsave(&mtx1_wdt_device.lock, flags);
 	if (mtx1_wdt_device.queue) {
 		mtx1_wdt_device.queue = 0;
-		gpio_set_value(mtx1_wdt_device.gpio, 0);
+		mtx1_wdt_device.gstate = 0;
+		gpio_direction_output(mtx1_wdt_device.gpio, 0);
 	}
 	ticks = mtx1_wdt_device.default_ticks;
 	spin_unlock_irqrestore(&mtx1_wdt_device.lock, flags);
diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile
index f420f1ff7f1..4781f806701 100644
--- a/drivers/xen/Makefile
+++ b/drivers/xen/Makefile
@@ -4,21 +4,21 @@ obj-y	+= xenbus/
 nostackp := $(call cc-option, -fno-stack-protector)
 CFLAGS_features.o			:= $(nostackp)
 
-obj-$(CONFIG_BLOCK)		+= biomerge.o
-obj-$(CONFIG_HOTPLUG_CPU)	+= cpu_hotplug.o
-obj-$(CONFIG_XEN_XENCOMM)	+= xencomm.o
-obj-$(CONFIG_XEN_BALLOON)	+= xen-balloon.o
-obj-$(CONFIG_XEN_DEV_EVTCHN)	+= xen-evtchn.o
-obj-$(CONFIG_XEN_GNTDEV)	+= xen-gntdev.o
+obj-$(CONFIG_BLOCK)			+= biomerge.o
+obj-$(CONFIG_HOTPLUG_CPU)		+= cpu_hotplug.o
+obj-$(CONFIG_XEN_XENCOMM)		+= xencomm.o
+obj-$(CONFIG_XEN_BALLOON)		+= xen-balloon.o
+obj-$(CONFIG_XEN_DEV_EVTCHN)		+= xen-evtchn.o
+obj-$(CONFIG_XEN_GNTDEV)		+= xen-gntdev.o
 obj-$(CONFIG_XEN_GRANT_DEV_ALLOC)	+= xen-gntalloc.o
-obj-$(CONFIG_XENFS)		+= xenfs/
+obj-$(CONFIG_XENFS)			+= xenfs/
 obj-$(CONFIG_XEN_SYS_HYPERVISOR)	+= sys-hypervisor.o
-obj-$(CONFIG_XEN_PLATFORM_PCI)	+= xen-platform-pci.o
-obj-$(CONFIG_SWIOTLB_XEN)	+= swiotlb-xen.o
-obj-$(CONFIG_XEN_DOM0)		+= pci.o
+obj-$(CONFIG_XEN_PLATFORM_PCI)		+= xen-platform-pci.o
+obj-$(CONFIG_SWIOTLB_XEN)		+= swiotlb-xen.o
+obj-$(CONFIG_XEN_DOM0)			+= pci.o
 
-xen-evtchn-y			:= evtchn.o
+xen-evtchn-y				:= evtchn.o
 xen-gntdev-y				:= gntdev.o
 xen-gntalloc-y				:= gntalloc.o
 
-xen-platform-pci-y		:= platform-pci.o
+xen-platform-pci-y			:= platform-pci.o
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 043af8ad6b6..f54290baa3d 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -114,7 +114,6 @@ static void __balloon_append(struct page *page)
 	if (PageHighMem(page)) {
 		list_add_tail(&page->lru, &ballooned_pages);
 		balloon_stats.balloon_high++;
-		dec_totalhigh_pages();
 	} else {
 		list_add(&page->lru, &ballooned_pages);
 		balloon_stats.balloon_low++;
@@ -124,6 +123,8 @@ static void __balloon_append(struct page *page)
 static void balloon_append(struct page *page)
 {
 	__balloon_append(page);
+	if (PageHighMem(page))
+		dec_totalhigh_pages();
 	totalram_pages--;
 }
 
@@ -193,7 +194,7 @@ static enum bp_state update_schedule(enum bp_state state)
 	return BP_EAGAIN;
 }
 
-static unsigned long current_target(void)
+static long current_credit(void)
 {
 	unsigned long target = balloon_stats.target_pages;
 
@@ -202,7 +203,7 @@ static unsigned long current_target(void)
 		     balloon_stats.balloon_low +
 		     balloon_stats.balloon_high);
 
-	return target;
+	return target - balloon_stats.current_pages;
 }
 
 static enum bp_state increase_reservation(unsigned long nr_pages)
@@ -246,7 +247,7 @@ static enum bp_state increase_reservation(unsigned long nr_pages)
 		set_phys_to_machine(pfn, frame_list[i]);
 
 		/* Link back into the page tables if not highmem. */
-		if (!xen_hvm_domain() && pfn < max_low_pfn) {
+		if (xen_pv_domain() && !PageHighMem(page)) {
 			int ret;
 			ret = HYPERVISOR_update_va_mapping(
 				(unsigned long)__va(pfn << PAGE_SHIFT),
@@ -293,7 +294,7 @@ static enum bp_state decrease_reservation(unsigned long nr_pages, gfp_t gfp)
 
 		scrub_page(page);
 
-		if (!xen_hvm_domain() && !PageHighMem(page)) {
+		if (xen_pv_domain() && !PageHighMem(page)) {
 			ret = HYPERVISOR_update_va_mapping(
 				(unsigned long)__va(pfn << PAGE_SHIFT),
 				__pte_ma(0), 0);
@@ -337,7 +338,7 @@ static void balloon_process(struct work_struct *work)
 	mutex_lock(&balloon_mutex);
 
 	do {
-		credit = current_target() - balloon_stats.current_pages;
+		credit = current_credit();
 
 		if (credit > 0)
 			state = increase_reservation(credit);
@@ -420,7 +421,7 @@ void free_xenballooned_pages(int nr_pages, struct page** pages)
 	}
 
 	/* The balloon may be too large now. Shrink it if needed. */
-	if (current_target() != balloon_stats.current_pages)
+	if (current_credit())
 		schedule_delayed_work(&balloon_worker, 0);
 
 	mutex_unlock(&balloon_mutex);
@@ -429,7 +430,7 @@ EXPORT_SYMBOL(free_xenballooned_pages);
 
 static int __init balloon_init(void)
 {
- 	unsigned long pfn, nr_pages, extra_pfn_end;
+	unsigned long pfn, extra_pfn_end;
 	struct page *page;
 
 	if (!xen_domain())
@@ -437,11 +438,7 @@ static int __init balloon_init(void)
 
 	pr_info("xen/balloon: Initialising balloon driver.\n");
 
- 	if (xen_pv_domain())
- 		nr_pages = xen_start_info->nr_pages;
- 	else
- 		nr_pages = max_pfn;
- 	balloon_stats.current_pages = min(nr_pages, max_pfn);
+	balloon_stats.current_pages = xen_pv_domain() ? min(xen_start_info->nr_pages, max_pfn) : max_pfn;
 	balloon_stats.target_pages  = balloon_stats.current_pages;
 	balloon_stats.balloon_low   = 0;
 	balloon_stats.balloon_high  = 0;
@@ -466,7 +463,7 @@ static int __init balloon_init(void)
 	     pfn < extra_pfn_end;
 	     pfn++) {
 		page = pfn_to_page(pfn);
-		/* totalram_pages doesn't include the boot-time
+		/* totalram_pages and totalhigh_pages do not include the boot-time
 		   balloon extension, so don't subtract from it. */
 		__balloon_append(page);
 	}
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 33167b43ac7..3ff822b4814 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -101,6 +101,7 @@ struct irq_info
 			unsigned short gsi;
 			unsigned char vector;
 			unsigned char flags;
+			uint16_t domid;
 		} pirq;
 	} u;
 };
@@ -118,6 +119,8 @@ static DEFINE_PER_CPU(unsigned long [NR_EVENT_CHANNELS/BITS_PER_LONG],
 static struct irq_chip xen_dynamic_chip;
 static struct irq_chip xen_percpu_chip;
 static struct irq_chip xen_pirq_chip;
+static void enable_dynirq(struct irq_data *data);
+static void disable_dynirq(struct irq_data *data);
 
 /* Get info for IRQ */
 static struct irq_info *info_for_irq(unsigned irq)
@@ -184,6 +187,7 @@ static void xen_irq_info_pirq_init(unsigned irq,
 				   unsigned short pirq,
 				   unsigned short gsi,
 				   unsigned short vector,
+				   uint16_t domid,
 				   unsigned char flags)
 {
 	struct irq_info *info = info_for_irq(irq);
@@ -193,6 +197,7 @@ static void xen_irq_info_pirq_init(unsigned irq,
 	info->u.pirq.pirq = pirq;
 	info->u.pirq.gsi = gsi;
 	info->u.pirq.vector = vector;
+	info->u.pirq.domid = domid;
 	info->u.pirq.flags = flags;
 }
 
@@ -473,16 +478,6 @@ static void xen_free_irq(unsigned irq)
 	irq_free_desc(irq);
 }
 
-static void pirq_unmask_notify(int irq)
-{
-	struct physdev_eoi eoi = { .irq = pirq_from_irq(irq) };
-
-	if (unlikely(pirq_needs_eoi(irq))) {
-		int rc = HYPERVISOR_physdev_op(PHYSDEVOP_eoi, &eoi);
-		WARN_ON(rc);
-	}
-}
-
 static void pirq_query_unmask(int irq)
 {
 	struct physdev_irq_status_query irq_status;
@@ -506,6 +501,29 @@ static bool probing_irq(int irq)
 	return desc && desc->action == NULL;
 }
 
+static void eoi_pirq(struct irq_data *data)
+{
+	int evtchn = evtchn_from_irq(data->irq);
+	struct physdev_eoi eoi = { .irq = pirq_from_irq(data->irq) };
+	int rc = 0;
+
+	irq_move_irq(data);
+
+	if (VALID_EVTCHN(evtchn))
+		clear_evtchn(evtchn);
+
+	if (pirq_needs_eoi(data->irq)) {
+		rc = HYPERVISOR_physdev_op(PHYSDEVOP_eoi, &eoi);
+		WARN_ON(rc);
+	}
+}
+
+static void mask_ack_pirq(struct irq_data *data)
+{
+	disable_dynirq(data);
+	eoi_pirq(data);
+}
+
 static unsigned int __startup_pirq(unsigned int irq)
 {
 	struct evtchn_bind_pirq bind_pirq;
@@ -539,7 +557,7 @@ static unsigned int __startup_pirq(unsigned int irq)
 
 out:
 	unmask_evtchn(evtchn);
-	pirq_unmask_notify(irq);
+	eoi_pirq(irq_get_irq_data(irq));
 
 	return 0;
 }
@@ -579,18 +597,7 @@ static void enable_pirq(struct irq_data *data)
 
 static void disable_pirq(struct irq_data *data)
 {
-}
-
-static void ack_pirq(struct irq_data *data)
-{
-	int evtchn = evtchn_from_irq(data->irq);
-
-	irq_move_irq(data);
-
-	if (VALID_EVTCHN(evtchn)) {
-		mask_evtchn(evtchn);
-		clear_evtchn(evtchn);
-	}
+	disable_dynirq(data);
 }
 
 static int find_irq_by_gsi(unsigned gsi)
@@ -639,9 +646,6 @@ int xen_bind_pirq_gsi_to_irq(unsigned gsi,
 	if (irq < 0)
 		goto out;
 
-	irq_set_chip_and_handler_name(irq, &xen_pirq_chip, handle_level_irq,
-				      name);
-
 	irq_op.irq = irq;
 	irq_op.vector = 0;
 
@@ -655,9 +659,35 @@ int xen_bind_pirq_gsi_to_irq(unsigned gsi,
 		goto out;
 	}
 
-	xen_irq_info_pirq_init(irq, 0, pirq, gsi, irq_op.vector,
+	xen_irq_info_pirq_init(irq, 0, pirq, gsi, irq_op.vector, DOMID_SELF,
 			       shareable ? PIRQ_SHAREABLE : 0);
 
+	pirq_query_unmask(irq);
+	/* We try to use the handler with the appropriate semantic for the
+	 * type of interrupt: if the interrupt doesn't need an eoi
+	 * (pirq_needs_eoi returns false), we treat it like an edge
+	 * triggered interrupt so we use handle_edge_irq.
+	 * As a matter of fact this only happens when the corresponding
+	 * physical interrupt is edge triggered or an msi.
+	 *
+	 * On the other hand if the interrupt needs an eoi (pirq_needs_eoi
+	 * returns true) we treat it like a level triggered interrupt so we
+	 * use handle_fasteoi_irq like the native code does for this kind of
+	 * interrupts.
+	 * Depending on the Xen version, pirq_needs_eoi might return true
+	 * not only for level triggered interrupts but for edge triggered
+	 * interrupts too. In any case Xen always honors the eoi mechanism,
+	 * not injecting any more pirqs of the same kind if the first one
+	 * hasn't received an eoi yet. Therefore using the fasteoi handler
+	 * is the right choice either way.
+	 */
+	if (pirq_needs_eoi(irq))
+		irq_set_chip_and_handler_name(irq, &xen_pirq_chip,
+				handle_fasteoi_irq, name);
+	else
+		irq_set_chip_and_handler_name(irq, &xen_pirq_chip,
+				handle_edge_irq, name);
+
 out:
 	spin_unlock(&irq_mapping_update_lock);
 
@@ -680,7 +710,8 @@ int xen_allocate_pirq_msi(struct pci_dev *dev, struct msi_desc *msidesc)
 }
 
 int xen_bind_pirq_msi_to_irq(struct pci_dev *dev, struct msi_desc *msidesc,
-			     int pirq, int vector, const char *name)
+			     int pirq, int vector, const char *name,
+			     domid_t domid)
 {
 	int irq, ret;
 
@@ -690,10 +721,10 @@ int xen_bind_pirq_msi_to_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 	if (irq == -1)
 		goto out;
 
-	irq_set_chip_and_handler_name(irq, &xen_pirq_chip, handle_level_irq,
-				      name);
+	irq_set_chip_and_handler_name(irq, &xen_pirq_chip, handle_edge_irq,
+			name);
 
-	xen_irq_info_pirq_init(irq, 0, pirq, 0, vector, 0);
+	xen_irq_info_pirq_init(irq, 0, pirq, 0, vector, domid, 0);
 	ret = irq_set_msi_desc(irq, msidesc);
 	if (ret < 0)
 		goto error_irq;
@@ -722,9 +753,16 @@ int xen_destroy_irq(int irq)
 
 	if (xen_initial_domain()) {
 		unmap_irq.pirq = info->u.pirq.pirq;
-		unmap_irq.domid = DOMID_SELF;
+		unmap_irq.domid = info->u.pirq.domid;
 		rc = HYPERVISOR_physdev_op(PHYSDEVOP_unmap_pirq, &unmap_irq);
-		if (rc) {
+		/* If another domain quits without making the pci_disable_msix
+		 * call, the Xen hypervisor takes care of freeing the PIRQs
+		 * (free_domain_pirqs).
+		 */
+		if ((rc == -ESRCH && info->u.pirq.domid != DOMID_SELF))
+			printk(KERN_INFO "domain %d does not have %d anymore\n",
+				info->u.pirq.domid, info->u.pirq.pirq);
+		else if (rc) {
 			printk(KERN_WARNING "unmap irq failed %d\n", rc);
 			goto out;
 		}
@@ -759,6 +797,12 @@ out:
 	return irq;
 }
 
+
+int xen_pirq_from_irq(unsigned irq)
+{
+	return pirq_from_irq(irq);
+}
+EXPORT_SYMBOL_GPL(xen_pirq_from_irq);
 int bind_evtchn_to_irq(unsigned int evtchn)
 {
 	int irq;
@@ -773,7 +817,7 @@ int bind_evtchn_to_irq(unsigned int evtchn)
 			goto out;
 
 		irq_set_chip_and_handler_name(irq, &xen_dynamic_chip,
-					      handle_fasteoi_irq, "event");
+					      handle_edge_irq, "event");
 
 		xen_irq_info_evtchn_init(irq, evtchn);
 	}
@@ -1179,9 +1223,6 @@ static void __xen_evtchn_do_upcall(void)
 				port = (word_idx * BITS_PER_LONG) + bit_idx;
 				irq = evtchn_to_irq[port];
 
-				mask_evtchn(port);
-				clear_evtchn(port);
-
 				if (irq != -1) {
 					desc = irq_to_desc(irq);
 					if (desc)
@@ -1337,10 +1378,16 @@ static void ack_dynirq(struct irq_data *data)
 {
 	int evtchn = evtchn_from_irq(data->irq);
 
-	irq_move_masked_irq(data);
+	irq_move_irq(data);
 
 	if (VALID_EVTCHN(evtchn))
-		unmask_evtchn(evtchn);
+		clear_evtchn(evtchn);
+}
+
+static void mask_ack_dynirq(struct irq_data *data)
+{
+	disable_dynirq(data);
+	ack_dynirq(data);
 }
 
 static int retrigger_dynirq(struct irq_data *data)
@@ -1502,6 +1549,18 @@ void xen_poll_irq(int irq)
 	xen_poll_irq_timeout(irq, 0 /* no timeout */);
 }
 
+/* Check whether the IRQ line is shared with other guests. */
+int xen_test_irq_shared(int irq)
+{
+	struct irq_info *info = info_for_irq(irq);
+	struct physdev_irq_status_query irq_status = { .irq = info->u.pirq.pirq };
+
+	if (HYPERVISOR_physdev_op(PHYSDEVOP_irq_status_query, &irq_status))
+		return 0;
+	return !(irq_status.flags & XENIRQSTAT_shared);
+}
+EXPORT_SYMBOL_GPL(xen_test_irq_shared);
+
 void xen_irq_resume(void)
 {
 	unsigned int cpu, evtchn;
@@ -1535,7 +1594,9 @@ static struct irq_chip xen_dynamic_chip __read_mostly = {
 	.irq_mask		= disable_dynirq,
 	.irq_unmask		= enable_dynirq,
 
-	.irq_eoi		= ack_dynirq,
+	.irq_ack		= ack_dynirq,
+	.irq_mask_ack		= mask_ack_dynirq,
+
 	.irq_set_affinity	= set_affinity_irq,
 	.irq_retrigger		= retrigger_dynirq,
 };
@@ -1545,14 +1606,15 @@ static struct irq_chip xen_pirq_chip __read_mostly = {
 
 	.irq_startup		= startup_pirq,
 	.irq_shutdown		= shutdown_pirq,
-
 	.irq_enable		= enable_pirq,
-	.irq_unmask		= enable_pirq,
-
 	.irq_disable		= disable_pirq,
-	.irq_mask		= disable_pirq,
 
-	.irq_ack		= ack_pirq,
+	.irq_mask		= disable_dynirq,
+	.irq_unmask		= enable_dynirq,
+
+	.irq_ack		= eoi_pirq,
+	.irq_eoi		= eoi_pirq,
+	.irq_mask_ack		= mask_ack_pirq,
 
 	.irq_set_affinity	= set_affinity_irq,
 
diff --git a/drivers/xen/gntalloc.c b/drivers/xen/gntalloc.c
index a7ffdfe19fc..f6832f46aea 100644
--- a/drivers/xen/gntalloc.c
+++ b/drivers/xen/gntalloc.c
@@ -427,6 +427,17 @@ static long gntalloc_ioctl(struct file *filp, unsigned int cmd,
 	return 0;
 }
 
+static void gntalloc_vma_open(struct vm_area_struct *vma)
+{
+	struct gntalloc_gref *gref = vma->vm_private_data;
+	if (!gref)
+		return;
+
+	spin_lock(&gref_lock);
+	gref->users++;
+	spin_unlock(&gref_lock);
+}
+
 static void gntalloc_vma_close(struct vm_area_struct *vma)
 {
 	struct gntalloc_gref *gref = vma->vm_private_data;
@@ -441,6 +452,7 @@ static void gntalloc_vma_close(struct vm_area_struct *vma)
 }
 
 static struct vm_operations_struct gntalloc_vmops = {
+	.open = gntalloc_vma_open,
 	.close = gntalloc_vma_close,
 };
 
@@ -471,8 +483,6 @@ static int gntalloc_mmap(struct file *filp, struct vm_area_struct *vma)
 	vma->vm_private_data = gref;
 
 	vma->vm_flags |= VM_RESERVED;
-	vma->vm_flags |= VM_DONTCOPY;
-	vma->vm_flags |= VM_PFNMAP | VM_PFN_AT_MMAP;
 
 	vma->vm_ops = &gntalloc_vmops;
 
diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c
index b0f9e8fb005..f914b26cf0c 100644
--- a/drivers/xen/gntdev.c
+++ b/drivers/xen/gntdev.c
@@ -330,17 +330,26 @@ static int unmap_grant_pages(struct grant_map *map, int offset, int pages)
 
 /* ------------------------------------------------------------------ */
 
+static void gntdev_vma_open(struct vm_area_struct *vma)
+{
+	struct grant_map *map = vma->vm_private_data;
+
+	pr_debug("gntdev_vma_open %p\n", vma);
+	atomic_inc(&map->users);
+}
+
 static void gntdev_vma_close(struct vm_area_struct *vma)
 {
 	struct grant_map *map = vma->vm_private_data;
 
-	pr_debug("close %p\n", vma);
+	pr_debug("gntdev_vma_close %p\n", vma);
 	map->vma = NULL;
 	vma->vm_private_data = NULL;
 	gntdev_put_map(map);
 }
 
 static struct vm_operations_struct gntdev_vmops = {
+	.open = gntdev_vma_open,
 	.close = gntdev_vma_close,
 };
 
@@ -652,7 +661,10 @@ static int gntdev_mmap(struct file *flip, struct vm_area_struct *vma)
 
 	vma->vm_ops = &gntdev_vmops;
 
-	vma->vm_flags |= VM_RESERVED|VM_DONTCOPY|VM_DONTEXPAND|VM_PFNMAP;
+	vma->vm_flags |= VM_RESERVED|VM_DONTEXPAND;
+
+	if (use_ptemod)
+		vma->vm_flags |= VM_DONTCOPY|VM_PFNMAP;
 
 	vma->vm_private_data = map;
 
diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c
index 3745a318def..fd725cde6ad 100644
--- a/drivers/xen/grant-table.c
+++ b/drivers/xen/grant-table.c
@@ -466,13 +466,30 @@ int gnttab_map_refs(struct gnttab_map_grant_ref *map_ops,
 		if (map_ops[i].status)
 			continue;
 
-		/* m2p override only supported for GNTMAP_contains_pte mappings */
-		if (!(map_ops[i].flags & GNTMAP_contains_pte))
-			continue;
-		pte = (pte_t *) (mfn_to_virt(PFN_DOWN(map_ops[i].host_addr)) +
+		if (map_ops[i].flags & GNTMAP_contains_pte) {
+			pte = (pte_t *) (mfn_to_virt(PFN_DOWN(map_ops[i].host_addr)) +
 				(map_ops[i].host_addr & ~PAGE_MASK));
-		mfn = pte_mfn(*pte);
-		ret = m2p_add_override(mfn, pages[i]);
+			mfn = pte_mfn(*pte);
+		} else {
+			/* If you really wanted to do this:
+			 * mfn = PFN_DOWN(map_ops[i].dev_bus_addr);
+			 *
+			 * The reason we do not implement it is b/c on the
+			 * unmap path (gnttab_unmap_refs) we have no means of
+			 * checking whether the page is !GNTMAP_contains_pte.
+			 *
+			 * That is without some extra data-structure to carry
+			 * the struct page, bool clear_pte, and list_head next
+			 * tuples and deal with allocation/delallocation, etc.
+			 *
+			 * The users of this API set the GNTMAP_contains_pte
+			 * flag so lets just return not supported until it
+			 * becomes neccessary to implement.
+			 */
+			return -EOPNOTSUPP;
+		}
+		ret = m2p_add_override(mfn, pages[i],
+				       map_ops[i].flags & GNTMAP_contains_pte);
 		if (ret)
 			return ret;
 	}
@@ -494,7 +511,7 @@ int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops,
 		return ret;
 
 	for (i = 0; i < count; i++) {
-		ret = m2p_remove_override(pages[i]);
+		ret = m2p_remove_override(pages[i], true /* clear the PTE */);
 		if (ret)
 			return ret;
 	}
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index a2eee574784..0b5366b5be2 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -70,12 +70,7 @@ static int xen_suspend(void *data)
 
 	BUG_ON(!irqs_disabled());
 
-	err = sysdev_suspend(PMSG_FREEZE);
-	if (!err) {
-		err = syscore_suspend();
-		if (err)
-			sysdev_resume();
-	}
+	err = syscore_suspend();
 	if (err) {
 		printk(KERN_ERR "xen_suspend: system core suspend failed: %d\n",
 			err);
@@ -102,7 +97,6 @@ static int xen_suspend(void *data)
 	}
 
 	syscore_resume();
-	sysdev_resume();
 
 	return 0;
 }
diff --git a/drivers/xen/sys-hypervisor.c b/drivers/xen/sys-hypervisor.c
index 60f1827a32c..1e0fe01eb67 100644
--- a/drivers/xen/sys-hypervisor.c
+++ b/drivers/xen/sys-hypervisor.c
@@ -215,7 +215,7 @@ static struct attribute_group xen_compilation_group = {
 	.attrs = xen_compile_attrs,
 };
 
-int __init static xen_compilation_init(void)
+static int __init xen_compilation_init(void)
 {
 	return sysfs_create_group(hypervisor_kobj, &xen_compilation_group);
 }