Merge tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY/serial patches from Greg KH:
 "tty and serial merge for 3.4-rc1

  Here's the big serial and tty merge for the 3.4-rc1 tree.

  There's loads of fixes and reworks in here from Jiri for the tty
  layer, and a number of patches from Alan to help try to wrestle the vt
  layer into a sane model.

  Other than that, lots of driver updates and fixes, and other minor
  stuff, all detailed in the shortlog."

* tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (132 commits)
  serial: pxa: add clk_prepare/clk_unprepare calls
  TTY: Wrong unicode value copied in con_set_unimap()
  serial: PL011: clear pending interrupts
  serial: bfin-uart: Don't access tty circular buffer in TX DMA interrupt after it is reset.
  vt: NULL dereference in vt_do_kdsk_ioctl()
  tty: serial: vt8500: fix annotations for probe/remove
  serial: remove back and forth conversions in serial_out_sync
  serial: use serial_port_in/out vs serial_in/out in 8250
  serial: introduce generic port in/out helpers
  serial: reduce number of indirections in 8250 code
  serial: delete useless void casts in 8250.c
  serial: make 8250's serial_in shareable to other drivers.
  serial: delete last unused traces of pausing I/O in 8250
  pch_uart: Add module parameter descriptions
  pch_uart: Use existing default_baud in setup_console
  pch_uart: Add user_uartclk parameter
  pch_uart: Add Fish River Island II uart clock quirks
  pch_uart: Use uartclk instead of base_baud
  mpc5200b/uart: select more tolerant uart prescaler on low baudrates
  tty: moxa: fix bit test in moxa_start()
  ...

92 files changed, 2795 insertions, 2299 deletions

diff --git a/drivers/accessibility/braille/braille_console.c b/drivers/accessibility/braille/braille_console.c
index c339a0880e6..d21167bfc86 100644
--- a/drivers/accessibility/braille/braille_console.c
+++ b/drivers/accessibility/braille/braille_console.c
@@ -244,16 +244,13 @@ static int keyboard_notifier_call(struct notifier_block *blk,
 
 			switch (val) {
 			case KVAL(K_CAPS):
-				on_off = vc_kbd_led(kbd_table + fg_console,
-						VC_CAPSLOCK);
+				on_off = vt_get_leds(fg_console, VC_CAPSLOCK);
 				break;
 			case KVAL(K_NUM):
-				on_off = vc_kbd_led(kbd_table + fg_console,
-						VC_NUMLOCK);
+				on_off = vt_get_leds(fg_console, VC_NUMLOCK);
 				break;
 			case KVAL(K_HOLD):
-				on_off = vc_kbd_led(kbd_table + fg_console,
-						VC_SCROLLOCK);
+				on_off = vt_get_leds(fg_console, VC_SCROLLOCK);
 				break;
 			}
 			if (on_off == 1)
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 43643033a3a..ee946865d6c 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -66,21 +66,6 @@ config TTY_PRINTK
 
 	  If unsure, say N.
 
-config BRIQ_PANEL
-	tristate 'Total Impact briQ front panel driver'
-	depends on PPC_CHRP
-	---help---
-	  The briQ is a small footprint CHRP computer with a frontpanel VFD, a
-	  tristate led and two switches. It is the size of a CDROM drive.
-
-	  If you have such one and want anything showing on the VFD then you
-	  must answer Y here.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called briq_panel.
-
-	  It's safe to say N here.
-
 config BFIN_OTP
 	tristate "Blackfin On-Chip OTP Memory Support"
 	depends on BLACKFIN && (BF51x || BF52x || BF54x)
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 32762ba769c..0dc5d7ce486 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_UV_MMTIMER)	+= uv_mmtimer.o
 obj-$(CONFIG_VIOTAPE)		+= viotape.o
 obj-$(CONFIG_IBM_BSR)		+= bsr.o
 obj-$(CONFIG_SGI_MBCS)		+= mbcs.o
-obj-$(CONFIG_BRIQ_PANEL)	+= briq_panel.o
 obj-$(CONFIG_BFIN_OTP)		+= bfin-otp.o
 
 obj-$(CONFIG_PRINTER)		+= lp.o
diff --git a/drivers/char/briq_panel.c b/drivers/char/briq_panel.c
deleted file mode 100644
index 095ab90535c..00000000000
--- a/drivers/char/briq_panel.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * Drivers for the Total Impact PPC based computer "BRIQ"
- * by Dr. Karsten Jeppesen
- *
- */
-
-#include <linux/module.h>
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/tty.h>
-#include <linux/timer.h>
-#include <linux/kernel.h>
-#include <linux/wait.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/miscdevice.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-
-#define		BRIQ_PANEL_MINOR	156
-#define		BRIQ_PANEL_VFD_IOPORT	0x0390
-#define		BRIQ_PANEL_LED_IOPORT	0x0398
-#define		BRIQ_PANEL_VER		"1.1 (04/20/2002)"
-#define		BRIQ_PANEL_MSG0		"Loading Linux"
-
-static int		vfd_is_open;
-static unsigned char	vfd[40];
-static int		vfd_cursor;
-static unsigned char	ledpb, led;
-
-static void update_vfd(void)
-{
-	int	i;
-
-	/* cursor home */
-	outb(0x02, BRIQ_PANEL_VFD_IOPORT);
-	for (i=0; i<20; i++)
-		outb(vfd[i], BRIQ_PANEL_VFD_IOPORT + 1);
-
-	/* cursor to next line */
-	outb(0xc0, BRIQ_PANEL_VFD_IOPORT);
-	for (i=20; i<40; i++)
-		outb(vfd[i], BRIQ_PANEL_VFD_IOPORT + 1);
-
-}
-
-static void set_led(char state)
-{
-	if (state == 'R')
-		led = 0x01;
-	else if (state == 'G')
-		led = 0x02;
-	else if (state == 'Y')
-		led = 0x03;
-	else if (state == 'X')
-		led = 0x00;
-	outb(led, BRIQ_PANEL_LED_IOPORT);
-}
-
-static int briq_panel_open(struct inode *ino, struct file *filep)
-{
-	tty_lock();
-	/* enforce single access, vfd_is_open is protected by BKL */
-	if (vfd_is_open) {
-		tty_unlock();
-		return -EBUSY;
-	}
-	vfd_is_open = 1;
-
-	tty_unlock();
-	return 0;
-}
-
-static int briq_panel_release(struct inode *ino, struct file *filep)
-{
-	if (!vfd_is_open)
-		return -ENODEV;
-
-	vfd_is_open = 0;
-
-	return 0;
-}
-
-static ssize_t briq_panel_read(struct file *file, char __user *buf, size_t count,
-			 loff_t *ppos)
-{
-	unsigned short c;
-	unsigned char cp;
-
-	if (!vfd_is_open)
-		return -ENODEV;
-
-	c = (inb(BRIQ_PANEL_LED_IOPORT) & 0x000c) | (ledpb & 0x0003);
-	set_led(' ');
-	/* upper button released */
-	if ((!(ledpb & 0x0004)) && (c & 0x0004)) {
-		cp = ' ';
-		ledpb = c;
-		if (copy_to_user(buf, &cp, 1))
-			return -EFAULT;
-		return 1;
-	}
-	/* lower button released */
-	else if ((!(ledpb & 0x0008)) && (c & 0x0008)) {
-		cp = '\r';
-		ledpb = c;
-		if (copy_to_user(buf, &cp, 1))
-			return -EFAULT;
-		return 1;
-	} else {
-		ledpb = c;
-		return 0;
-	}
-}
-
-static void scroll_vfd( void )
-{
-	int	i;
-
-	for (i=0; i<20; i++) {
-		vfd[i] = vfd[i+20];
-		vfd[i+20] = ' ';
-	}
-	vfd_cursor = 20;
-}
-
-static ssize_t briq_panel_write(struct file *file, const char __user *buf, size_t len,
-			  loff_t *ppos)
-{
-	size_t indx = len;
-	int i, esc = 0;
-
-	if (!vfd_is_open)
-		return -EBUSY;
-
-	for (;;) {
-		char c;
-		if (!indx)
-			break;
-		if (get_user(c, buf))
-			return -EFAULT;
-		if (esc) {
-			set_led(c);
-			esc = 0;
-		} else if (c == 27) {
-			esc = 1;
-		} else if (c == 12) {
-			/* do a form feed */
-			for (i=0; i<40; i++)
-				vfd[i] = ' ';
-			vfd_cursor = 0;
-		} else if (c == 10) {
-			if (vfd_cursor < 20)
-				vfd_cursor = 20;
-			else if (vfd_cursor < 40)
-				vfd_cursor = 40;
-			else if (vfd_cursor < 60)
-				vfd_cursor = 60;
-			if (vfd_cursor > 59)
-				scroll_vfd();
-		} else {
-			/* just a character */
-			if (vfd_cursor > 39)
-				scroll_vfd();
-			vfd[vfd_cursor++] = c;
-		}
-		indx--;
-		buf++;
-	}
-	update_vfd();
-
-	return len;
-}
-
-static const struct file_operations briq_panel_fops = {
-	.owner		= THIS_MODULE,
-	.read		= briq_panel_read,
-	.write		= briq_panel_write,
-	.open		= briq_panel_open,
-	.release	= briq_panel_release,
-	.llseek		= noop_llseek,
-};
-
-static struct miscdevice briq_panel_miscdev = {
-	BRIQ_PANEL_MINOR,
-	"briq_panel",
-	&briq_panel_fops
-};
-
-static int __init briq_panel_init(void)
-{
-	struct device_node *root = of_find_node_by_path("/");
-	const char *machine;
-	int i;
-
-	machine = of_get_property(root, "model", NULL);
-	if (!machine || strncmp(machine, "TotalImpact,BRIQ-1", 18) != 0) {
-		of_node_put(root);
-		return -ENODEV;
-	}
-	of_node_put(root);
-
-	printk(KERN_INFO
-		"briq_panel: v%s Dr. Karsten Jeppesen (kj@totalimpact.com)\n",
-		BRIQ_PANEL_VER);
-
-	if (!request_region(BRIQ_PANEL_VFD_IOPORT, 4, "BRIQ Front Panel"))
-		return -EBUSY;
-
-	if (!request_region(BRIQ_PANEL_LED_IOPORT, 2, "BRIQ Front Panel")) {
-		release_region(BRIQ_PANEL_VFD_IOPORT, 4);
-		return -EBUSY;
-	}
-	ledpb = inb(BRIQ_PANEL_LED_IOPORT) & 0x000c;
-
-	if (misc_register(&briq_panel_miscdev) < 0) {
-		release_region(BRIQ_PANEL_VFD_IOPORT, 4);
-		release_region(BRIQ_PANEL_LED_IOPORT, 2);
-		return -EBUSY;
-	}
-
-	outb(0x38, BRIQ_PANEL_VFD_IOPORT);	/* Function set */
-	outb(0x01, BRIQ_PANEL_VFD_IOPORT);	/* Clear display */
-	outb(0x0c, BRIQ_PANEL_VFD_IOPORT);	/* Display on */
-	outb(0x06, BRIQ_PANEL_VFD_IOPORT);	/* Entry normal */
-	for (i=0; i<40; i++)
-		vfd[i]=' ';
-#ifndef MODULE
-	vfd[0] = 'L';
-	vfd[1] = 'o';
-	vfd[2] = 'a';
-	vfd[3] = 'd';
-	vfd[4] = 'i';
-	vfd[5] = 'n';
-	vfd[6] = 'g';
-	vfd[7] = ' ';
-	vfd[8] = '.';
-	vfd[9] = '.';
-	vfd[10] = '.';
-#endif /* !MODULE */
-
-	update_vfd();
-
-	return 0;
-}
-
-static void __exit briq_panel_exit(void)
-{
-	misc_deregister(&briq_panel_miscdev);
-	release_region(BRIQ_PANEL_VFD_IOPORT, 4);
-	release_region(BRIQ_PANEL_LED_IOPORT, 2);
-}
-
-module_init(briq_panel_init);
-module_exit(briq_panel_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Karsten Jeppesen <karsten@jeppesens.com>");
-MODULE_DESCRIPTION("Driver for the Total Impact briQ front panel");
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 07f6a5abe37..f6453df4921 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -2484,7 +2484,7 @@ static int mgslpc_open(struct tty_struct *tty, struct file * filp)
 
 	/* verify range of specified line number */
 	line = tty->index;
-	if ((line < 0) || (line >= mgslpc_device_count)) {
+	if (line >= mgslpc_device_count) {
 		printk("%s(%d):mgslpc_open with invalid line #%d.\n",
 			__FILE__,__LINE__,line);
 		return -ENODEV;
@@ -2836,7 +2836,6 @@ static int __init synclink_cs_init(void)
 
     /* Initialize the tty_driver structure */
 
-    serial_driver->owner = THIS_MODULE;
     serial_driver->driver_name = "synclink_cs";
     serial_driver->name = "ttySLP";
     serial_driver->major = ttymajor;
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index eedd5474850..46b77ede84c 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -184,12 +184,10 @@ static int __init ttyprintk_init(void)
 	if (!ttyprintk_driver)
 		return ret;
 
-	ttyprintk_driver->owner = THIS_MODULE;
 	ttyprintk_driver->driver_name = "ttyprintk";
 	ttyprintk_driver->name = "ttyprintk";
 	ttyprintk_driver->major = TTYAUX_MAJOR;
 	ttyprintk_driver->minor_start = 3;
-	ttyprintk_driver->num = 1;
 	ttyprintk_driver->type