Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (47 commits)
  mfd: Rename twl5031 sih modules
  mfd: Storage class for timberdale should be before const qualifier
  mfd: Remove unneeded and dangerous clearing of clientdata
  mfd: New AB8500 driver
  gpio: Fix inverted rdc321x gpio data out registers
  mfd: Change rdc321x resources flags to IORESOURCE_IO
  mfd: Move pcf50633 irq related functions to its own file.
  mfd: Use threaded irq for pcf50633
  mfd: pcf50633-adc: Fix potential race in pcf50633_adc_sync_read
  mfd: Fix pcf50633 bitfield logic in interrupt handler
  gpio: rdc321x needs to select MFD_CORE
  mfd: Use menuconfig for quicker config editing
  ARM: AB3550 board configuration and irq for U300
  mfd: AB3550 core driver
  mfd: AB3100 register access change to abx500 API
  mfd: Renamed ab3100.h to abx500.h
  gpio: Add TC35892 GPIO driver
  mfd: Add Toshiba's TC35892 MFD core
  mfd: Delay to mask tsc irq in max8925
  mfd: Remove incorrect wm8350 kfree
  ...

47 files changed, 7260 insertions, 955 deletions

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 4fd0f276df5..724038dab4c 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -195,6 +195,13 @@ config GPIO_PCF857X
 	  This driver provides an in-kernel interface to those GPIOs using
 	  platform-neutral GPIO calls.
 
+config GPIO_TC35892
+	bool "TC35892 GPIOs"
+	depends on MFD_TC35892
+	help
+	  This enables support for the GPIOs found on the TC35892
+	  I/O Expander.
+
 config GPIO_TWL4030
 	tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
 	depends on TWL4030_CORE
@@ -282,6 +289,15 @@ config GPIO_TIMBERDALE
 	---help---
 	Add support for the GPIO IP in the timberdale FPGA.
 
+config GPIO_RDC321X
+	tristate "RDC R-321x GPIO support"
+	depends on PCI && GPIOLIB
+	select MFD_CORE
+	select MFD_RDC321X
+	help
+	  Support for the RDC R321x SoC GPIOs over southbridge
+	  PCI configuration space.
+
 comment "SPI GPIO expanders:"
 
 config GPIO_MAX7301
@@ -317,4 +333,14 @@ config GPIO_UCB1400
 	  To compile this driver as a module, choose M here: the
 	  module will be called ucb1400_gpio.
 
+comment "MODULbus GPIO expanders:"
+
+config GPIO_JANZ_TTL
+	tristate "Janz VMOD-TTL Digital IO Module"
+	depends on MFD_JANZ_CMODIO
+	help
+	  This enables support for the Janz VMOD-TTL Digital IO module.
+	  This driver provides support for driving the pins in output
+	  mode only. Input mode is not supported.
+
 endif
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 10f3f8d958b..51c3cdd41b5 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_GPIO_MCP23S08)	+= mcp23s08.o
 obj-$(CONFIG_GPIO_PCA953X)	+= pca953x.o
 obj-$(CONFIG_GPIO_PCF857X)	+= pcf857x.o
 obj-$(CONFIG_GPIO_PL061)	+= pl061.o
+obj-$(CONFIG_GPIO_TC35892)	+= tc35892-gpio.o
 obj-$(CONFIG_GPIO_TIMBERDALE)	+= timbgpio.o
 obj-$(CONFIG_GPIO_TWL4030)	+= twl4030-gpio.o
 obj-$(CONFIG_GPIO_UCB1400)	+= ucb1400_gpio.o
@@ -27,4 +28,6 @@ obj-$(CONFIG_GPIO_VR41XX)	+= vr41xx_giu.o
 obj-$(CONFIG_GPIO_WM831X)	+= wm831x-gpio.o
 obj-$(CONFIG_GPIO_WM8350)	+= wm8350-gpiolib.o
 obj-$(CONFIG_GPIO_WM8994)	+= wm8994-gpio.o
-obj-$(CONFIG_GPIO_SCH)		+= sch_gpio.o
\ No newline at end of file
+obj-$(CONFIG_GPIO_SCH)		+= sch_gpio.o
+obj-$(CONFIG_GPIO_RDC321X)	+= rdc321x-gpio.o
+obj-$(CONFIG_GPIO_JANZ_TTL)	+= janz-ttl.o
diff --git a/drivers/gpio/janz-ttl.c b/drivers/gpio/janz-ttl.c
new file mode 100644
index 00000000000..813ac077e5d
--- /dev/null
+++ b/drivers/gpio/janz-ttl.c
@@ -0,0 +1,258 @@
+/*
+ * Janz MODULbus VMOD-TTL GPIO Driver
+ *
+ * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+
+#include <linux/mfd/janz.h>
+
+#define DRV_NAME "janz-ttl"
+
+#define PORTA_DIRECTION		0x23
+#define PORTB_DIRECTION		0x2B
+#define PORTC_DIRECTION		0x06
+#define PORTA_IOCTL		0x24
+#define PORTB_IOCTL		0x2C
+#define PORTC_IOCTL		0x07
+
+#define MASTER_INT_CTL		0x00
+#define MASTER_CONF_CTL		0x01
+
+#define CONF_PAE		(1 << 2)
+#define CONF_PBE		(1 << 7)
+#define CONF_PCE		(1 << 4)
+
+struct ttl_control_regs {
+	__be16 portc;
+	__be16 portb;
+	__be16 porta;
+	__be16 control;
+};
+
+struct ttl_module {
+	struct gpio_chip gpio;
+
+	/* base address of registers */
+	struct ttl_control_regs __iomem *regs;
+
+	u8 portc_shadow;
+	u8 portb_shadow;
+	u8 porta_shadow;
+
+	spinlock_t lock;
+};
+
+static int ttl_get_value(struct gpio_chip *gpio, unsigned offset)
+{
+	struct ttl_module *mod = dev_get_drvdata(gpio->dev);
+	u8 *shadow;
+	int ret;
+
+	if (offset < 8) {
+		shadow = &mod->porta_shadow;
+	} else if (offset < 16) {
+		shadow = &mod->portb_shadow;
+		offset -= 8;
+	} else {
+		shadow = &mod->portc_shadow;
+		offset -= 16;
+	}
+
+	spin_lock(&mod->lock);
+	ret = *shadow & (1 << offset);
+	spin_unlock(&mod->lock);
+	return ret;
+}
+
+static void ttl_set_value(struct gpio_chip *gpio, unsigned offset, int value)
+{
+	struct ttl_module *mod = dev_get_drvdata(gpio->dev);
+	void __iomem *port;
+	u8 *shadow;
+
+	if (offset < 8) {
+		port = &mod->regs->porta;
+		shadow = &mod->porta_shadow;
+	} else if (offset < 16) {
+		port = &mod->regs->portb;
+		shadow = &mod->portb_shadow;
+		offset -= 8;
+	} else {
+		port = &mod->regs->portc;
+		shadow = &mod->portc_shadow;
+		offset -= 16;
+	}
+
+	spin_lock(&mod->lock);
+	if (value)
+		*shadow |= (1 << offset);
+	else
+		*shadow &= ~(1 << offset);
+
+	iowrite16be(*shadow, port);
+	spin_unlock(&mod->lock);
+}
+
+static void __devinit ttl_write_reg(struct ttl_module *mod, u8 reg, u16 val)
+{
+	iowrite16be(reg, &mod->regs->control);
+	iowrite16be(val, &mod->regs->control);
+}
+
+static void __devinit ttl_setup_device(struct ttl_module *mod)
+{
+	/* reset the device to a known state */
+	iowrite16be(0x0000, &mod->regs->control);
+	iowrite16be(0x0001, &mod->regs->control);
+	iowrite16be(0x0000, &mod->regs->control);
+
+	/* put all ports in open-drain mode */
+	ttl_write_reg(mod, PORTA_IOCTL, 0x00ff);
+	ttl_write_reg(mod, PORTB_IOCTL, 0x00ff);
+	ttl_write_reg(mod, PORTC_IOCTL, 0x000f);
+
+	/* set all ports as outputs */
+	ttl_write_reg(mod, PORTA_DIRECTION, 0x0000);
+	ttl_write_reg(mod, PORTB_DIRECTION, 0x0000);
+	ttl_write_reg(mod, PORTC_DIRECTION, 0x0000);
+
+	/* set all ports to drive zeroes */
+	iowrite16be(0x0000, &mod->regs->porta);
+	iowrite16be(0x0000, &mod->regs->portb);
+	iowrite16be(0x0000, &mod->regs->portc);
+
+	/* enable all ports */
+	ttl_write_reg(mod, MASTER_CONF_CTL, CONF_PAE | CONF_PBE | CONF_PCE);
+}
+
+static int __devinit ttl_probe(struct platform_device *pdev)
+{
+	struct janz_platform_data *pdata;
+	struct device *dev = &pdev->dev;
+	struct ttl_module *mod;
+	struct gpio_chip *gpio;
+	struct resource *res;
+	int ret;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(dev, "no platform data\n");
+		ret = -ENXIO;
+		goto out_return;
+	}
+
+	mod = kzalloc(sizeof(*mod), GFP_KERNEL);
+	if (!mod) {
+		dev_err(dev, "unable to allocate private data\n");
+		ret = -ENOMEM;
+		goto out_return;
+	}
+
+	platform_set_drvdata(pdev, mod);
+	spin_lock_init(&mod->lock);
+
+	/* get access to the MODULbus registers for this module */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "MODULbus registers not found\n");
+		ret = -ENODEV;
+		goto out_free_mod;
+	}
+
+	mod->regs = ioremap(res->start, resource_size(res));
+	if (!mod->regs) {
+		dev_err(dev, "MODULbus registers not ioremap\n");
+		ret = -ENOMEM;
+		goto out_free_mod;
+	}
+
+	ttl_setup_device(mod);
+
+	/* Initialize the GPIO data structures */
+	gpio = &mod->gpio;
+	gpio->dev = &pdev->dev;
+	gpio->label = pdev->name;
+	gpio->get = ttl_get_value;
+	gpio->set = ttl_set_value;
+	gpio->owner = THIS_MODULE;
+
+	/* request dynamic allocation */
+	gpio->base = -1;
+	gpio->ngpio = 20;
+
+	ret = gpiochip_add(gpio);
+	if (ret) {
+		dev_err(dev, "unable to add GPIO chip\n");
+		goto out_iounmap_regs;
+	}
+
+	dev_info(&pdev->dev, "module %d: registered GPIO device\n",
+			     pdata->modno);
+	return 0;
+
+out_iounmap_regs:
+	iounmap(mod->regs);
+out_free_mod:
+	kfree(mod);
+out_return:
+	return ret;
+}
+
+static int __devexit ttl_remove(struct platform_device *pdev)
+{
+	struct ttl_module *mod = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	ret = gpiochip_remove(&mod->gpio);
+	if (ret) {
+		dev_err(dev, "unable to remove GPIO chip\n");
+		return ret;
+	}
+
+	iounmap(mod->regs);
+	kfree(mod);
+	return 0;
+}
+
+static struct platform_driver ttl_driver = {
+	.driver		= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ttl_probe,
+	.remove		= __devexit_p(ttl_remove),
+};
+
+static int __init ttl_init(void)
+{
+	return platform_driver_register(&ttl_driver);
+}
+
+static void __exit ttl_exit(void)
+{
+	platform_driver_unregister(&ttl_driver);
+}
+
+MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
+MODULE_DESCRIPTION("Janz MODULbus VMOD-TTL Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:janz-ttl");
+
+module_init(ttl_init);
+module_exit(ttl_exit);
diff --git a/drivers/gpio/rdc321x-gpio.c b/drivers/gpio/rdc321x-gpio.c
new file mode 100644
index 00000000000..2762698e020
--- /dev/null
+++ b/drivers/gpio/rdc321x-gpio.c
@@ -0,0 +1,246 @@
+/*
+ * RDC321x GPIO driver
+ *
+ * Copyright (C) 2008, Volker Weiss <dev@tintuc.de>
+ * Copyright (C) 2007-2010 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/gpio.h>
+#include <linux/mfd/rdc321x.h>
+#include <linux/slab.h>
+
+struct rdc321x_gpio {
+	spinlock_t		lock;
+	struct pci_dev		*sb_pdev;
+	u32			data_reg[2];
+	int			reg1_ctrl_base;
+	int			reg1_data_base;
+	int			reg2_ctrl_base;
+	int			reg2_data_base;
+	struct gpio_chip	chip;
+};
+
+/* read GPIO pin */
+static int rdc_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+	struct rdc321x_gpio *gpch;
+	u32 value = 0;
+	int reg;
+
+	gpch = container_of(chip, struct rdc321x_gpio, chip);
+	reg = gpio < 32 ? gpch->reg1_data_base : gpch->reg2_data_base;
+
+	spin_lock(&gpch->lock);
+	pci_write_config_dword(gpch->sb_pdev, reg,
+					gpch->data_reg[gpio < 32 ? 0 : 1]);
+	pci_read_config_dword(gpch->sb_pdev, reg, &value);
+	spin_unlock(&gpch->lock);
+
+	return (1 << (gpio & 0x1f)) & value ? 1 : 0;
+}
+
+static void rdc_gpio_set_value_impl(struct gpio_chip *chip,
+				unsigned gpio, int value)
+{
+	struct rdc321x_gpio *gpch;
+	int reg = (gpio < 32) ? 0 : 1;
+
+	gpch = container_of(chip, struct rdc321x_gpio, chip);
+
+	if (value)
+		gpch->data_reg[reg] |= 1 << (gpio & 0x1f);
+	else
+		gpch->data_reg[reg] &= ~(1 << (gpio & 0x1f));
+
+	pci_write_config_dword(gpch->sb_pdev,
+			reg ? gpch->reg2_data_base : gpch->reg1_data_base,
+			gpch->data_reg[reg]);
+}
+
+/* set GPIO pin to value */
+static void rdc_gpio_set_value(struct gpio_chip *chip,
+				unsigned gpio, int value)
+{
+	struct rdc321x_gpio *gpch;
+
+	gpch = container_of(chip, struct rdc321x_gpio, chip);
+	spin_lock(&gpch->lock);
+	rdc_gpio_set_value_impl(chip, gpio, value);
+	spin_unlock(&gpch->lock);
+}
+
+static int rdc_gpio_config(struct gpio_chip *chip,
+				unsigned gpio, int value)
+{
+	struct rdc321x_gpio *gpch;
+	int err;
+	u32 reg;
+
+	gpch = container_of(chip, struct rdc321x_gpio, chip);
+
+	spin_lock(&gpch->lock);
+	err = pci_read_config_dword(gpch->sb_pdev, gpio < 32 ?
+			gpch->reg1_ctrl_base : gpch->reg2_ctrl_base, &reg);
+	if (err)
+		goto unlock;
+
+	reg |= 1 << (gpio & 0x1f);
+
+	err = pci_write_config_dword(gpch->sb_pdev, gpio < 32 ?
+			gpch->reg1_ctrl_base : gpch->reg2_ctrl_base, reg);
+	if (err)
+		goto unlock;
+
+	rdc_gpio_set_value_impl(chip, gpio, value);
+
+unlock:
+	spin_unlock(&gpch->lock);
+
+	return err;
+}
+
+/* configure GPIO pin as input */
+static int rdc_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	return rdc_gpio_config(chip, gpio, 1);
+}
+
+/*
+ * Cache the initial value of both GPIO data registers
+ */
+static int __devinit rdc321x_gpio_probe(struct platform_device *pdev)
+{
+	int err;
+	struct resource *r;
+	struct rdc321x_gpio *rdc321x_gpio_dev;
+	struct rdc321x_gpio_pdata *pdata;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data supplied\n");
+		return -ENODEV;
+	}
+
+	rdc321x_gpio_dev = kzalloc(sizeof(struct rdc321x_gpio), GFP_KERNEL);
+	if (!rdc321x_gpio_dev) {
+		dev_err(&pdev->dev, "failed to allocate private data\n");
+		return -ENOMEM;
+	}
+
+	r = platform_get_resource_byname(pdev, IORESOURCE_IO, "gpio-reg1");
+	if (!r) {
+		dev_err(&pdev->dev, "failed to get gpio-reg1 resource\n");
+		err = -ENODEV;
+		goto out_free;
+	}
+
+	spin_lock_init(&rdc321x_gpio_dev->lock);
+	rdc321x_gpio_dev->sb_pdev = pdata->sb_pdev;
+	rdc321x_gpio_dev->reg1_ctrl_base = r->start;
+	rdc321x_gpio_dev->reg1_data_base = r->start + 0x4;
+
+	r = platform_get_resource_byname(pdev, IORESOURCE_IO, "gpio-reg2");
+	if (!r) {
+		dev_err(&pdev->dev, "failed to get gpio-reg2 resource\n");
+		err = -ENODEV;
+		goto out_free;
+	}
+
+	rdc321x_gpio_dev->reg2_ctrl_base = r->start;
+	rdc321x_gpio_dev->reg2_data_base = r->start + 0x4;
+
+	rdc321x_gpio_dev->chip.label = "rdc321x-gpio";
+	rdc321x_gpio_dev->chip.direction_input = rdc_gpio_direction_input;
+	rdc321x_gpio_dev->chip.direction_output = rdc_gpio_config;
+	rdc321x_gpio_dev->chip.get = rdc_gpio_get_value;
+	rdc321x_gpio_dev->chip.set = rdc_gpio_set_value;
+	rdc321x_gpio_dev->chip.base = 0;
+	rdc321x_gpio_dev->chip.ngpio = pdata->max_gpios;
+
+	platform_set_drvdata(pdev, rdc321x_gpio_dev);
+
+	/* This might not be, what others (BIOS, bootloader, etc.)
+	   wrote to these registers before, but it's a good guess. Still
+	   better than just using 0xffffffff. */
+	err = pci_read_config_dword(rdc321x_gpio_dev->sb_pdev,
+					rdc321x_gpio_dev->reg1_data_base,
+					&rdc321x_gpio_dev->data_reg[0]);
+	if (err)
+		goto out_drvdata;
+
+	err = pci_read_config_dword(rdc321x_gpio_dev->sb_pdev,
+					rdc321x_gpio_dev->reg2_data_base,
+					&rdc321x_gpio_dev->data_reg[1]);
+	if (err)
+		goto out_drvdata;
+
+	dev_info(&pdev->dev, "registering %d GPIOs\n",
+					rdc321x_gpio_dev->chip.ngpio);
+	return gpiochip_add(&rdc321x_gpio_dev->chip);
+
+out_drvdata:
+	platform_set_drvdata(pdev, NULL);
+out_free:
+	kfree(rdc321x_gpio_dev);
+	return err;
+}
+
+static int __devexit rdc321x_gpio_remove(struct platform_device *pdev)
+{
+	int ret;
+	struct rdc321x_gpio *rdc321x_gpio_dev = platform_get_drvdata(pdev);
+
+	ret = gpiochip_remove(&rdc321x_gpio_dev->chip);
+	if (ret)
+		dev_err(&pdev->dev, "failed to unregister chip\n");
+
+	kfree(rdc321x_gpio_dev);
+	platform_set_drvdata(pdev, NULL);
+
+	return ret;
+}
+
+static struct platform_driver rdc321x_gpio_driver = {
+	.driver.name	= "rdc321x-gpio",
+	.driver.owner	= THIS_MODULE,
+	.probe		= rdc321x_gpio_probe,
+	.remove		= __devexit_p(rdc321x_gpio_remove),
+};
+
+static int __init rdc321x_gpio_init(void)
+{
+	return platform_driver_register(&rdc321x_gpio_driver);
+}
+
+static void __exit rdc321x_gpio_exit(void)
+{
+	platform_driver_unregister(&rdc321x_gpio_driver);
+}
+
+module_init(rdc321x_gpio_init);
+module_exit(rdc321x_gpio_exit);
+
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_DESCRIPTION("RDC321x GPIO driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rdc321x-gpio");
diff --git a/drivers/gpio/tc35892-gpio.c b/drivers/gpio/tc35892-gpio.c
new file mode 100644
index 00000000000..1be6288780d
--- /dev/null
+++ b/drivers/gpio/tc35892-gpio.c
@@ -0,0 +1,381 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Hanumath Prasad <hanumath.prasad@stericsson.com> for ST-Ericsson
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/tc35892.h>
+
+/*
+ * These registers are modified under the irq bus lock and cached to avoid
+ * unnecessary writes in bus_sync_unlock.
+ */
+enum { REG_IBE, REG_IEV, REG_IS, REG_IE };
+
+#define CACHE_NR_REGS	4
+#define CACHE_NR_BANKS	3
+
+struct tc35892_gpio {
+	struct gpio_chip chip;
+	struct tc35892 *tc35892;
+	struct device *dev;
+	struct mutex irq_lock;
+
+	int irq_base;
+
+	/* Caches of interrupt control registers for bus_lock */
+	u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS];
+	u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS];
+};
+
+static inline struct tc35892_gpio *to_tc35892_gpio(struct gpio_chip *chip)
+{
+	return container_of(chip, struct tc35892_gpio, chip);
+}
+
+static int tc35892_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct tc35892_gpio *tc35892_gpio = to_tc35892_gpio(chip);
+	struct tc35892 *tc35892 = tc35892_gpio->tc35892;
+	u8 reg = TC35892_GPIODATA0 + (offset / 8) * 2;
+	u8 mask = 1 << (offset % 8);
+	int ret;
+
+	ret = tc35892_reg_read(tc35892, reg);
+	if (ret < 0)
+		return ret;
+
+	return ret & mask;
+}
+
+static void tc35892_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct tc35892_gpio *tc35892_gpio = to_tc35892_gpio(chip);
+	struct tc35892 *tc35892 = tc35892_gpio->tc35892;
+	u8 reg = TC35892_GPIODATA0 + (offset / 8) * 2;
+	unsigned pos = offset % 8;
+	u8 data[] = {!!val << pos, 1 << pos};
+
+	tc35892_block_write(tc35892, reg, ARRAY_SIZE(data), data);
+}
+
+static int tc35892_gpio_direction_output(struct gpio_chip *chip,
+					 unsigned offset, int val)
+{
+	struct tc35892_gpio *tc35892_gpio = to_tc35892_gpio(chip);
+	struct tc35892 *tc35892 = tc35892_gpio->tc35892;
+	u8 reg = TC35892_GPIODIR0 + offset / 8;
+	unsigned pos = offset % 8;
+
+	tc35892_gpio_set(chip, offset, val);
+
+	return tc35892_set_bits(tc35892, reg, 1 << pos, 1 << pos);
+}
+
+static int tc35892_gpio_direction_input(struct gpio_chip *chip,
+					unsigned offset)
+{
+	struct tc35892_gpio *tc35892_gpio = to_tc35892_gpio(chip);
+	struct tc35892 *tc35892 = tc35892_gpio->tc35892;
+	u8 reg = TC35892_GPIODIR0 + offset / 8;
+	unsigned pos = offset % 8;
+
+	return tc35892_set_bits(tc35892, reg, 1 << pos, 0);
+}
+
+static int tc35892_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct tc35892_gpio *tc35892_gpio = to_tc35892_gpio(chip);
+
+	return tc35892_gpio->irq_base + offset;
+}
+
+static struct gpio_chip template_chip = {
+	.label			= "tc35892",
+	.owner			= THIS_MODULE,
+	.direction_input	= tc35892_gpio_direction_input,
+	.get			= tc35892_gpio_get,
+	.direction_output	= tc35892_gpio_direction_output,
+	.set			= tc35892_gpio_set,
+	.to_irq			= tc35892_gpio_to_irq,
+	.can_sleep		= 1,
+};
+
+static int tc35892_gpio_irq_set_type(unsigned int irq, unsigned int type)
+{
+	struct tc35892_gpio *tc35892_gpio = get_irq_chip_data(irq);
+	int offset = irq - tc35892_gpio->irq_base;
+	int regoffset = offset / 8;
+	int mask = 1 << (offset % 8);
+
+	if (type == IRQ_TYPE_EDGE_BOTH) {
+		tc35892_gpio->regs[REG_IBE][regoffset] |= mask;
+		return 0;
+	}
+
+	tc35892_gpio->regs[REG_IBE][regoffset] &= ~mask;
+
+	if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_LEVEL_HIGH)
+		tc35892_gpio->regs[REG_IS][regoffset] |= mask;
+	else
+		tc35892_gpio->regs[REG_IS][regoffset] &= ~mask;
+
+	if (type == IRQ_TYPE_EDGE_RISING || type == IRQ_TYPE_LEVEL_HIGH)
+		tc35892_gpio->regs[REG_IEV][regoffset] |= mask;
+	else
+		tc35892_gpio->regs[REG_IEV][regoffset] &= ~mask;
+
+	return 0;
+}
+
+static void tc35892_gpio_irq_lock(unsigned int irq)
+{
+	struct tc35892_gpio *tc35892_gpio = get_irq_chip_data(irq);
+
+	mutex_lock(&tc35892_gpio->irq_lock);
+}
+
+static void tc35892_gpio_irq_sync_unlock(unsigned int irq)
+{
+	struct tc35892_gpio *tc35892_gpio = get_irq_chip_data(irq);
+	struct tc35892 *tc35892 = tc35892_gpio->tc35892;
+	static const u8 regmap[] = {
+		[REG_IBE]	= TC35892_GPIOIBE0,
+		[REG_IEV]	= TC35892_GPIOIEV0,
+		[REG_IS]	= TC35892_GPIOIS0,
+		[REG_IE]	= TC35892_GPIOIE0,
+	};
+	int i, j;
+
+	for (i = 0; i < CACHE_NR_REGS; i++) {
+		for (j = 0; j < CACHE_NR_BANKS; j++) {
+			u8 old = tc35892_gpio->oldregs[i][j];
+			u8 new = tc35892_gpio->regs[i][j];
+
+			if (new == old)
+				continue;
+
+			tc35892_gpio->oldregs[i][j] = new;
+			tc35892_reg_write(tc35892, regmap[i] + j * 8, new);
+		}
+	}
+
+	mutex_unlock(&tc35892_gpio->irq_lock);
+}
+
+static void tc35892_gpio_irq_mask(unsigned int irq)
+{
+	struct tc35892_gpio *tc35892_gpio = get_irq_chip_data(irq);
+	int offset = irq - tc35892_gpio->irq_base;
+	int regoffset = offset / 8;
+	int mask = 1 << (offset % 8);
+
+	tc35892_gpio->regs[REG_IE][regoffset] &= ~mask;
+}
+
+static void tc35892_gpio_irq_unmask(unsigned int irq)
+{
+	struct tc35892_gpio *tc35892_gpio = get_irq_chip_data(irq);
+	int offset = irq - tc35892_gpio->irq_base;
+	int regoffset = offset / 8;
+	int mask = 1 << (offset % 8);
+
+	tc35892_gpio->regs[REG_IE][regoffset] |= mask;
+}
+
+static struct irq_chip tc35892_gpio_irq_chip = {
+	.name			= "tc35892-gpio",
+	.bus_lock		= tc35892_gpio_irq_lock,
+	.bus_sync_unlock	= tc35892_gpio_irq_sync_unlock,
+	.mask			= tc35892_gpio_irq_mask,
+	.unmask			= tc35892_gpio_irq_unmask,
+	.set_type		= tc35892_gpio_irq_set_type,
+};
+
+static irqreturn_t tc35892_gpio_irq(int irq, void *dev)
+{
+	struct tc35892_gpio *tc35892_gpio = dev;
+	struct tc35892 *tc35892 = tc35892_gpio->tc35892;
+	u8 status[CACHE_NR_BANKS];
+	int ret;
+	int i;
+
+	ret = tc35892_block_read(tc35892, TC35892_GPIOMIS0,
+				 ARRAY_SIZE(status), status);
+	if (ret < 0)
+		return IRQ_NONE;
+
+	for (i = 0; i < ARRAY_SIZE(status); i++) {
+		unsigned int stat = status[i];
+		if (!stat)
+			continue;
+
+		while (stat) {
+			int bit = __ffs(stat);
+			int line = i * 8 + bit;
+
+			handle_nested_irq(tc35892_gpio->irq_base + line);
+			stat &= ~(1 << bit);
+		}
+
+		tc35892_reg_write(tc35892, TC35892_GPIOIC0 + i, status[i]);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int tc35892_gpio_irq_init(struct tc35892_gpio *tc35892_gpio)
+{
+	int base = tc35892_gpio->irq_base;
+	int irq;
+
+	for (irq = base; irq < base + tc35892_gpio->chip.ngpio; irq++) {
+		set_irq_chip_data(irq, tc35892_gpio);
+		set_irq_chip_and_handler(irq, &tc35892_gpio_irq_chip,
+					 handle_simple_irq);
+		set_irq_nested_thread(irq, 1);
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, IRQF_VALID);
+#else
+		set_irq_noprobe(irq);
+#endif
+	}
+
+	return 0;
+}
+
+static void tc35892_gpio_irq_remove(struct tc35892_gpio *tc35892_gpio)
+{
+	int base = tc35892_gpio->irq_base;
+	int irq;
+
+	for (irq = base; irq < base + tc35892_gpio->chip.ngpio; irq++) {
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, 0);
+#endif
+		set_irq_chip_and_handler(irq, NULL, NULL);
+		set_irq_chip_data(irq, NULL);
+	}
+}
+
+static int __devinit tc35892_gpio_probe(struct platform_device *pdev)
+{
+	struct tc35892 *tc35892 = dev_get_drvdata(pdev->dev.parent);
+	struct tc35892_gpio_platform_data *pdata;
+	struct tc35892_gpio *tc35892_gpio;
+	int ret;
+	int irq;
+
+	pdata = tc35892->pdata->gpio;
+	if (!pdata)
+		return -ENODEV;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	tc35892_gpio = kzalloc(sizeof(struct tc35892_gpio), GFP_KERNEL);
+	if (!tc35892_gpio)
+		return -ENOMEM;
+
+	mutex_init(&tc35892_gpio->irq_lock);
+
+	tc35892_gpio->dev = &pdev->dev;
+	tc35892_gpio->tc35892 = tc35892;
+
+	tc35892_gpio->chip = template_chip;
+	tc35892_gpio->chip.ngpio = tc35892->num_gpio;
+	tc35892_gpio->chip.dev = &pdev->dev;
+	tc35892_gpio->chip.base = pdata->gpio_base;
+
+	tc35892_gpio->irq_base = tc35892->irq_base + TC35892_INT_GPIO(0);
+
+	/* Bring the GPIO module out of reset */
+	ret = tc35892_set_bits(tc35892, TC35892_RSTCTRL,
+			       TC35892_RSTCTRL_GPIRST, 0);
+	if (ret < 0)
+		goto out_free;
+
+	ret = tc35892_gpio_irq_init(tc35892_gpio);
+	if (ret)
+		goto out_free;
+
+	ret = request_threaded_irq(irq, NULL, tc35892_gpio_irq, IRQF_ONESHOT,
+				   "tc35892-gpio", tc35892_gpio);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
+		goto out_removeirq;
+	}
+
+	ret = gpiochip_add(&tc35892_gpio->chip);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret);
+		goto out_freeirq;
+	}
+
+	platform_set_drvdata(pdev, tc35892_gpio);
+
+	return 0;
+
+out_freeirq:
+	free_irq(irq, tc35892_gpio);
+out_removeirq:
+	tc35892_gpio_irq_remove(tc35892_gpio);
+out_free:
+	kfree(tc35892_gpio);
+	return ret;
+}
+
+static int __devexit tc35892_gpio_remove(struct platform_device *pdev)
+{
+	struct tc35892_gpio *tc35892_gpio = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+	int ret;
+
+	ret = gpiochip_remove(&tc35892_gpio->chip);
+	if (ret < 0) {
+		dev_err(tc35892_gpio->dev,
+			"unable to remove gpiochip: %d\n", ret);
+		return ret;
+	}
+
+	free_irq(irq, tc35892_gpio);
+	tc35892_gpio_irq_remove(tc35892_gpio);
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(tc35892_gpio);
+
+	return 0;
+}
+
+static struct platform_driver tc35892_gpio_driver = {
+	.driver.name	= "tc35892-gpio",
+	.driver.owner	= THIS_MODULE,
+	.probe		= tc35892_gpio_probe,
+	.remove		= __devexit_p(tc35892_gpio_remove),
+};
+
+static int __init tc35892_gpio_init(void)
+{
+	return platform_driver_register(&tc35892_gpio_driver);
+}
+subsys_initcall(tc35892_gpio_init);
+
+static void __exit tc35892_gpio_exit(void)
+{
+	platform_driver_unregister(&tc35892_gpio_driver);
+}
+module_exit(tc35892_gpio_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TC35892 GPIO driver");
+MODULE_AUTHOR("Hanumath Prasad, Rabin Vincent");
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index b9f58ca82fd..6703c6b9800 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -590,4 +590,17 @@ config TOUCHSCREEN_PCAP
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called pcap_ts.
+
+config TOUCHSCREEN_TPS6507X
+	tristate "TPS6507x based touchscreens"
+	depends on I2C
+	help
+	  Say Y here if you have a TPS6507x based touchscreen
+	  controller.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tps6507x_ts.
+
 endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 8ad36eef90a..497964a7a21 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -46,3 +46,4 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL)	+= atmel-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE)	+= mainstone-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE)	+= zylonite-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_W90X900)	+= w90p910_ts.o
+obj-$(CONFIG_TOUCHSCREEN_TPS6507X)	+= tps6507x-ts.o
diff --git a/drivers/input/touchscreen/tps6507x-ts.c b/drivers/input/touchscreen/tps6507x-ts.c
new file mode 100644
index 00000000000..5de80a1a730
--- /dev/null
+++ b/drivers/input/touchscreen/tps6507x-ts.c
@@ -0,0 +1,400 @@
+/*
+ * drivers/input/touchscreen/tps6507x_ts.c
+ *
+ * Touchscreen driver for the tps6507x chip.
+ *
+ * Copyright (c) 2009 RidgeRun (todd.fischer@ridgerun.com)
+ *
+ * Credits:
+ *
+ *    Using code from tsc2007, MtekVision Co., Ltd.
+ *
+ * For licencing details see kernel-base/COPYING
+ *
+ * TPS65070, TPS65073, TPS650731, and TPS650732 support
+ * 10 bit touch screen interface.
+ */
+
+#include <linux/module.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/tps6507x.h>
+#include <linux/input/tps6507x-ts.h>
+#include <linux/delay.h>
+
+#define TSC_DEFAULT_POLL_PERIOD 30 /* ms */
+#define TPS_DEFAULT_MIN_PRESSURE 0x30
+#define MAX_10BIT ((1 << 10) - 1)
+
+#define	TPS6507X_ADCONFIG_CONVERT_TS (TPS6507X_ADCONFIG_AD_ENABLE | \
+					 TPS6507X_ADCONFIG_START_CONVERSION | \
+					 TPS6507X_ADCONFIG_INPUT_REAL_TSC)
+#define	TPS6507X_ADCONFIG_POWER_DOWN_TS (TPS6507X_ADCONFIG_INPUT_REAL_TSC)
+
+struct ts_event {
+	u16	x;
+	u16	y;
+	u16	pressure;
+};
+
+struct tps6507x_ts {
+	struct input_dev	*input_dev;
+	struct device		*dev;
+	char			phys[32];
+	struct workqueue_struct *wq;
+	struct delayed_work	work;
+	unsigned		polling;	/* polling is active */
+	struct ts_event		tc;
+	struct tps6507x_dev	*mfd;
+	u16			model;
+	unsigned		pendown;
+	int			irq;
+	void			(*clear_penirq)(void);
+	unsigned long		poll_period;	/* ms */
+	u16			min_pressure;
+	int			vref;		/* non-zero to leave vref on */
+};
+
+static int tps6507x_read_u8(struct tps6507x_ts *tsc, u8 reg, u8 *data)
+{
+	int err;
+
+	err = tsc->mfd->read_dev(tsc->mfd, reg, 1, data);
+
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int tps6507x_write_u8(struct tps6507x_ts *tsc, u8 reg, u8 data)
+{
+	return tsc->mfd->write_dev(tsc->mfd, reg, 1, &data);
+}
+
+static s32 tps6507x_adc_conversion(struct tps6507x_ts *tsc,
+				   u8 tsc_mode, u16 *value)
+{
+	s32 ret;
+	u8 adc_status;
+	u8 result;
+
+	/* Route input signal to A/D converter */
+
+	ret = tps6507x_write_u8(tsc, TPS6507X_REG_TSCMODE, tsc_mode);
+	if (ret) {
+		dev_err(tsc->dev, "TSC mode read failed\n");
+		goto err;
+	}
+
+	/* Start A/D conversion */
+
+	ret = tps6507x_write_u8(tsc, TPS6507X_REG_ADCONFIG,
+				TPS6507X_ADCONFIG_CONVERT_TS);
+	if (ret) {
+		dev_err(tsc->dev, "ADC config write failed\n");
+		return ret;
+	}
+
+	do {
+		ret = tps6507x_read_u8(tsc, TPS6507X_REG_ADCONFIG,
+				       &adc_status);
+		if (ret) {
+			dev_err(tsc->dev, "ADC config read failed\n");
+			goto err;
+		}
+	} while (adc_status & TPS6507X_ADCONFIG_START_CONVERSION);
+
+	ret = tps6507x_read_u8(tsc, TPS6507X_REG_ADRESULT_2, &result);
+	if (ret) {
+		dev_err(tsc->dev, "ADC result 2 read failed\n");
+		goto err;
+	}
+
+	*value = (result & TPS6507X_REG_ADRESULT_2_MASK) << 8;
+
+	ret = tps6507x_read_u8(tsc, TPS6507X_REG_ADRESULT_1, &result);
+	if (ret) {
+		dev_err(tsc->dev, "ADC result 1 read failed\n");
+		goto err;
+	}
+
+	*value |= result;
+
+	dev_dbg(tsc->dev, "TSC channel %d = 0x%X\n", tsc_mode, *value);
+
+err:
+	return ret;
+}
+
+/* Need to call tps6507x_adc_standby() after using A/D converter for the
+ * touch screen interrupt to work properly.
+ */
+
+static s32 tps6507x_adc_standby(struct tps6507x_ts *tsc)
+{
+	s32 ret;
+	s32 loops = 0;
+	u8 val;
+
+	ret = tps6507x_write_u8(tsc,  TPS6507X_REG_ADCONFIG,
+				TPS6507X_ADCONFIG_INPUT_TSC);
+	if (ret)
+		return ret;
+
+	ret = tps6507x_write_u8(tsc, TPS6507X_REG_TSCMODE,
+				TPS6507X_TSCMODE_STANDBY);
+	if (ret)
+		return ret;
+
+	ret = tps6507x_read_u8(tsc, TPS6507X_REG_INT, &val);
+	if (ret)
+		return ret;
+
+	while (val & TPS6507X_REG_TSC_INT) {
+		mdelay(10);
+		ret = tps6507x_read_u8(tsc, TPS6507X_REG_INT, &val);
+		if (ret)
+			return ret;
+		loops++;
+	}
+
+	return ret;
+}
+
+static void tps6507x_ts_handler(struct work_struct *work)
+{
+	struct tps6507x_ts *tsc =  container_of(work,
+				struct tps6507x_ts, work.work);
+	struct input_dev *input_dev = tsc->input_dev;
+	int pendown;
+	int schd;
+	int poll = 0;
+	s32 ret;
+
+	ret =  tps6507x_adc_conversion(tsc, TPS6507X_TSCMODE_PRESSURE,
+				       &tsc->tc.pressure);
+	if (ret)
+		goto done;
+
+	pendown = tsc->tc.pressure > tsc->min_pressure;
+
+	if (unlikely(!pendown && tsc->pendown)) {
+		dev_dbg(tsc->dev, "UP\n");
+		input_report_key(input_dev, BTN_TOUCH, 0);
+		input_report_abs(input_dev, ABS_PRESSURE, 0);
+		input_sync(input_dev);
+		tsc->pendown = 0;
+	}
+
+	if (pendown) {
+
+		if (!tsc->pendown) {
+			dev_dbg(tsc->dev, "DOWN\n");
+			input_report_key(input_dev, BTN_TOUCH, 1);
+		} else
+			dev_dbg(tsc->dev, "still down\n");
+
+		ret =  tps6507x_adc_conversion(tsc, TPS6507X_TSCMODE_X_POSITION,
+					       &tsc->tc.x);
+		if (ret)
+			goto done;
+
+		ret =  tps6507x_adc_conversion(tsc, TPS6507X_TSCMODE_Y_POSITION,
+					       &tsc->tc.y);
+		if (ret)
+			goto done;
+
+		input_report_abs(input_dev, ABS_X, tsc->tc.x);
+		input_report_abs(input_dev, ABS_Y, tsc->tc.y);
+		input_report_abs(input_dev, ABS_PRESSURE, tsc->tc.pressure);
+		input_sync(input_dev);
+		tsc->pendown = 1;
+		poll = 1;
+	}
+
+done:
+	/* always poll if not using interrupts */
+	poll = 1;
+
+	if (poll) {
+		schd = queue_delayed_work(tsc->wq, &tsc->work,
+					  tsc->poll_period * HZ / 1000);
+		if (schd)
+			tsc->polling = 1;
+		else {
+			tsc->polling = 0;
+			dev_err(tsc->dev, "re-schedule failed");
+		}
+	} else
+		tsc->polling = 0;
+
+	ret = tps6507x_adc_standby(tsc);
+}
+
+static int tps6507x_ts_probe(struct platform_device *pdev)
+{
+	int error;
+	struct tps6507x_ts *tsc;
+	struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent);
+	struct touchscreen_init_data *init_data;
+	struct input_dev *input_dev;
+	struct tps6507x_board *tps_board;
+	int schd;
+
+	/**
+	 * tps_board points to pmic related constants
+	 * coming from the board-evm file.
+	 */
+
+	tps_board = (struct tps6507x_board *)tps6507x_dev->dev->platform_data;
+
+	if (!tps_board) {
+		dev_err(tps6507x_dev->dev,
+			"Could not find tps6507x platform data\n");
+		return -EIO;
+	}
+
+	/**
+	 * init_data points to array of regulator_init structures
+	 * coming from the board-evm file.
+	 */
+
+	init_data = tps_board->tps6507x_ts_init_data;
+
+	tsc = kzalloc(sizeof(struct tps6507x_ts), GFP_KERNEL);
+	if (!tsc) {
+		dev_err(tps6507x_dev->dev, "failed to allocate driver data\n");
+		error = -ENOMEM;
+		goto err0;
+	}
+
+	tps6507x_dev->ts = tsc;
+	tsc->mfd = tps6507x_dev;
+	tsc->dev = tps6507x_dev->dev;
+	input_dev = input_allocate_device();
+	if (!input_dev) {
+		dev_err(tsc->dev, "Failed to allocate input device.\n");
+		error = -ENOMEM;
+		goto err1;
+	}
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(input_dev, ABS_X, 0, MAX_10BIT, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, MAX_10BIT, 0, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_10BIT, 0, 0);
+
+	input_dev->name = "TPS6507x Touchscreen";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = tsc->dev;
+
+	snprintf(tsc->phys, sizeof(tsc->phys),
+		 "%s/input0", dev_name(tsc->dev));
+	input_dev->phys = tsc->phys;
+
+	dev_dbg(tsc->dev, "device: %s\n", input_dev->phys);
+
+	input_set_drvdata(input_dev, tsc);
+
+	tsc->input_dev = input_dev;
+
+	INIT_DELAYED_WORK(&tsc->work, tps6507x_ts_handler);
+	tsc->wq = create_workqueue("TPS6507x Touchscreen");
+
+	if (init_data) {
+		tsc->poll_period = init_data->poll_period;
+		tsc->vref = init_data->vref;
+		tsc->min_pressure = init_data->min_pressure;
+		input_dev->id.vendor = init_data->vendor;
+		input_dev->id.product = init_data->product;
+		input_dev->id.version = init_data->version;
+	} else {
+		tsc->poll_period = TSC_DEFAULT_POLL_PERIOD;
+		tsc->min_pressure = TPS_DEFAULT_MIN_PRESSURE;
+	}
+
+	error = tps6507x_adc_standby(tsc);
+	if (error)
+		goto err2;
+
+	error = input_register_device(input_dev);
+	if (error)
+		goto err2;
+
+	schd = queue_delayed_work(tsc->wq, &tsc->work,
+				  tsc->poll_period * HZ / 1000);
+
+	if (schd)
+		tsc->polling = 1;
+	else {
+		tsc->polling = 0;
+		dev_err(tsc->dev, "schedule failed");
+		goto err2;
+	 }
+
+	return 0;
+
+err2:
+	cancel_delayed_work(&tsc->work);
+	flush_workqueue(tsc->wq);
+	destroy_workqueue(tsc->wq);
+	tsc->wq = 0;
+	input_free_device(input_dev);
+err1:
+	kfree(tsc);
+	tps6507x_dev->ts = NULL;
+err0:
+	return error;
+}
+
+static int __devexit tps6507x_ts_remove(struct platform_device *pdev)
+{
+	struct tps6507x_dev *tps6507x_dev = platform_get_drvdata(pdev);
+	struct tps6507x_ts *tsc = tps6507x_dev->ts;
+	struct input_dev *input_dev = tsc->input_dev;
+
+	if (!tsc)
+		return 0;
+
+	cancel_delayed_work(&tsc->work);
+	flush_workqueue(tsc->wq);
+	destroy_workqueue(tsc->wq);
+	tsc->wq = 0;
+
+	input_free_device(input_dev);
+
+	tps6507x_dev->ts = NULL;
+	kfree(tsc);
+
+	return 0;
+}
+
+static struct platform_driver tps6507x_ts_driver = {
+	.driver = {
+		.name = "tps6507x-ts",
+		.owner = THIS_MODULE,
+	},
+	.probe = tps6507x_ts_probe,
+	.remove = __devexit_p(tps6507x_ts_remove),
+};
+
+static int __init tps6507x_ts_init(void)
+{
+	return platform_driver_register(&tps6507x_ts_driver);
+}
+module_init(tps6507x_ts_init);
+
+static void __exit tps6507x_ts_exit(void)
+{
+	platform_driver_unregister(&tps6507x_ts_driver);
+}
+module_exit(tps6507x_ts_exit);
+
+MODULE_AUTHOR("Todd Fischer <todd.fischer@ridgerun.com>");
+MODULE_DESCRIPTION("TPS6507x - TouchScreen driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:tps6507x-tsc");
diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c
index 405d2d5183c..2c65a2c5729 100644
--- a/drivers/mfd/88pm860x-core.c
+++ b/drivers/mfd/88pm860x-core.c
@@ -566,7 +566,7 @@ out:
 	return ret;
 }
 
-static void __devexit device_irq_exit(struct pm860x_chip *chip)
+static void device_irq_exit(struct pm860x_chip *chip)
 {
 	if (chip->core_irq)
 		free_irq(chip->core_irq, chip);
@@ -703,7 +703,7 @@ out:
 	return;
 }
 
-int pm860x_device_init(struct pm860x_chip *chip,
+int __devinit pm860x_device_init(struct pm860x_chip *chip,
 		       struct pm860x_platform_data *pdata)
 {
 	chip->core_irq = 0;
@@ -731,7 +731,7 @@ int pm860x_device_init(struct pm860x_chip *chip,
 	return 0;
 }
 
-void pm860x_device_exit(struct pm860x_chip *chip)
+void __devexit pm860x_device_exit(struct pm860x_chip *chip)
 {
 	device_irq_exit(chip);
 	mfd_remove_devices(chip->dev);
diff --git a/drivers/mfd/88pm860x-i2c.c b/drivers/mfd/88pm860x-i2c.c
index 4a6e7186334..c933b64d128 100644
--- a/drivers/mfd/88pm860x-i2c.c
+++ b/drivers/mfd/88pm860x-i2c.c
@@ -200,8 +200,8 @@ static int __devexit pm860x_remove(struct i2c_client *client)
 
 	pm860x_device_exit(chip);
 	i2c_unregister_device(chip->companion);
-	i2c_set_clientdata(chip->companion, NULL);
 	i2c_set_clientdata(chip->client, NULL);
+	i2c_set_clientdata(client, NULL);
 	kfree(chip);
 	return 0;
 }
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3c6a9860dd9..9da0e504bbe 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2,8 +2,14 @@
 # Multifunction miscellaneous devices
 #
 
-menu "Multifunction device drivers"
+menuconfig MFD_SUPPORT
+	bool "Multifunction device drivers"
 	depends on HAS_IOMEM
+	default y
+	help
+	  Configure MFD device drivers.
+
+if MFD_SUPPORT
 
 config MFD_CORE
 	tristate
@@ -116,6 +122,18 @@ config TPS65010
 	  This driver can also be built as a module.  If so, the module
 	  will be called tps65010.
 
+config TPS6507X
+	tristate "TPS6507x Power Management / Touch Screen chips"
+	select MFD_CORE
+	depends on I2C
+	help
+	  If you say yes here you get support for the TPS6507x series of
+	  Power Management / Touch Screen chips.  These include voltage
+	  regulators, lithium ion/polymer battery charging, touch screen
+	  and other features that are often used in portable devices.
+	  This driver can also be built as a module.  If so, the module
+	  will be called tps6507x.
+
 config MENELAUS
 	bool "Texas Instruments TWL92330/Menelaus PM chip"
 	depends on I2C=y && ARCH_OMAP2
@@ -159,6 +177,17 @@ config TWL4030_CODEC
 	select MFD_CORE
 	default n
 
+config MFD_TC35892
+	bool "Support Toshiba TC35892"
+	depends on I2C=y && GENERIC_HARDIRQS
+	select MFD_CORE
+	help
+	  Support for the Toshiba TC35892 I/O Expander.
+
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the
+	  functionality of the device.
+
 config MFD_TMIO
 	bool
 	default n
@@ -351,9 +380,19 @@ config PCF50633_GPIO
 	 Say yes here if you want to include support GPIO for pins on
 	 the PCF50633 chip.
 
+config ABX500_CORE
+	bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
+	default y if ARCH_U300
+	help
+	  Say yes here if you have the ABX500 Mixed Signal IC family
+	  chips. This core driver expose register access functions.
+	  Functionality specific drivers using these functions can
+	  remain unchanged when IC changes. Binding of the functions to
+	  actual register access is done by the IC core driver.
+
 config AB3100_CORE
 	bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
-	depends on I2C=y
+	depends on I2C=y && ABX500_CORE
 	default y if ARCH_U300
 	help
 	  Select this to enable the AB3100 Mixed Signal IC core
@@ -381,15 +420,30 @@ config EZX_PCAP
 	  This enables the PCAP ASIC present on EZX Phones. This is
 	  needed for MMC, TouchScreen, Sound, USB, etc..
 
-config AB4500_CORE
-	tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip"
-	depends on SPI
+config AB8500_CORE
+	bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
+	depends on SPI=y && GENERIC_HARDIRQS
+	select MFD_CORE
 	help
-	  Select this option to enable access to AB4500 power management
+	  Select this option to enable access to AB8500 power management
 	  chip. This connects to U8500 on the SSP/SPI bus and exports
 	  read/write functions for the devices to get access to this chip.
 	  This chip embeds various other multimedia funtionalities as well.
 
+config AB3550_CORE
+        bool "ST-Ericsson AB3550 Mixed Signal Circuit core functions"
+	select MFD_CORE
+	depends on I2C=y && GENERIC_HARDIRQS && ABX500_CORE
+	help
+	  Select this to enable the AB3550 Mixed Signal IC core
+	  functionality. This connects to a AB3550 on the I2C bus
+	  and expose a number of symbols needed for dependent devices
+	  to read and write registers and subscribe to events from
+	  this multi-functional IC. This is needed to use other features
+	  of the AB3550 such as battery-backed RTC, charging control,
+	  LEDs, vibrator, system power and temperature, power management
+	  and ALSA sound.
+
 config MFD_TIMBERDALE
 	tristate "Support for the Timberdale FPGA"
 	select MFD_CORE
@@ -409,7 +463,26 @@ config LPC_SCH
 	  LPC bridge function of the Intel SCH provides support for
 	  System Management Bus and General Purpose I/O.
 
-endmenu
+config MFD_RDC321X
+	tristate "Support for RDC-R321x southbridge"
+	select MFD_CORE
+	depends on PCI
+	help
+	  Say yes here if you want to have support for the RDC R-321x SoC
+	  southbridge which provides access to GPIOs and Watchdog using the
+	  southbridge PCI device configuration space.
+
+config MFD_JANZ_CMODIO
+	tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
+	select MFD_CORE
+	depends on PCI
+	help
+	  This is the core driver for the Janz CMOD-IO PCI MODULbus
+	  carrier board. This device is a PCI to MODULbus bridge which may
+	  host many different types of MODULbus daughterboards, including
+	  CAN and GPIO controllers.
+
+endif # MFD_SUPPORT
 
 menu "Multimedia Capabilities Port drivers"
 	depends on ARCH_SA1100
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 87935f967aa..fb503e77dc6 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_HTC_I2CPLD)	+= htc-i2cpld.o
 obj-$(CONFIG_MFD_DAVINCI_VOICECODEC)	+= davinci_voicecodec.o
 obj-$(CONFIG_MFD_DM355EVM_MSP)	+= dm355evm_msp.o
 
+obj-$(CONFIG_MFD_TC35892)	+= tc35892.o
 obj-$(CONFIG_MFD_T7L66XB)	+= t7l66xb.o tmio_core.o
 obj-$(CONFIG_MFD_TC6387XB)	+= tc6387xb.o tmio_core.o
 obj-$(CONFIG_MFD_TC6393XB)	+= tc6393xb.o tmio_core.o
@@ -29,6 +30,7 @@ obj-$(CONFIG_MFD_WM8350_I2C)	+= wm8350-i2c.o
 obj-$(CONFIG_MFD_WM8994)	+= wm8994-core.o wm8994-irq.o
 
 obj-$(CONFIG_TPS65010)		+= tps65010.o
+obj-$(CONFIG_TPS6507X)		+= tps6507x.o
 obj-$(CONFIG_MENELAUS)		+= menelaus.o
 
 obj-$(CONFIG_TWL4030_CORE)	+= twl-core.o twl4030-irq.o twl6030-irq.o
@@ -55,12 +57,17 @@ obj-$(CONFIG_PMIC_DA903X)	+= da903x.o
 max8925-objs			:= max8925-core.o max8925-i2c.o
 obj-$(CONFIG_MFD_MAX8925)	+= max8925.o
 
-obj-$(CONFIG_MFD_PCF50633)	+= pcf50633-core.o
+pcf50633-objs			:= pcf50633-core.o pcf50633-irq.o
+obj-$(CONFIG_MFD_PCF50633)	+= pcf50633.o
 obj-$(CONFIG_PCF50633_ADC)	+= pcf50633-adc.o
 obj-$(CONFIG_PCF50633_GPIO)	+= pcf50633-gpio.o
+obj-$(CONFIG_ABX500_CORE)	+= abx500-core.o
 obj-$(CONFIG_AB3100_CORE)	+= ab3100-core.o
 obj-$(CONFIG_AB3100_OTP)	+= ab3100-otp.o
-obj-$(CONFIG_AB4500_CORE)	+= ab4500-core.o
+obj-$(CONFIG_AB3550_CORE)	+= ab3550-core.o
+obj-$(CONFIG_AB8500_CORE)	+= ab8500-core.o ab8500-spi.o
 obj-$(CONFIG_MFD_TIMBERDALE)    += timberdale.o
 obj-$(CONFIG_PMIC_ADP5520)	+= adp5520.o
-obj-$(CONFIG_LPC_SCH)		+= lpc_sch.o
\ No newline at end of file
+obj-$(CONFIG_LPC_SCH)		+= lpc_sch.o
+obj-$(CONFIG_MFD_RDC321X)	+= rdc321x-southbridge.o
+obj-$(CONFIG_MFD_JANZ_CMODIO)	+= janz-cmodio.o
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
index e4ca5909e42..53ebfee548f 100644
--- a/drivers/mfd/ab3100-core.c
+++ b/drivers/mfd/ab3100-core.c
@@ -19,7 +19,7 @@
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <linux/uaccess.h>
-#include <linux/mfd/ab3100.h>
+#include <linux/mfd/abx500.h>
 
 /* These are the only registers inside AB3100 used in this main file */
 
@@ -59,24 +59,15 @@
  * The AB3100 is usually assigned address 0x48 (7-bit)
  * The chip is defined in the platform i2c_board_data section.
  */
-
-u8 ab3100_get_chip_type(struct ab3100 *ab3100)
+static int ab3100_get_chip_id(struct device *dev)
 {
-	u8 chip = ABUNKNOWN;
-
-	switch (ab3100->chip_id & 0xf0) {
-	case  0xa0:
-		chip = AB3000;
-		break;
-	case  0xc0:
-		chip = AB3100;
-		break;
-	}
-	return chip;
+	struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
+
+	return (int)ab3100->chip_id;
 }
-EXPORT_SYMBOL(ab3100_get_chip_type);
 
-int ab3100_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 regval)
+static int ab3100_set_register_interruptible(struct ab3100 *ab3100,
+	u8 reg, u8 regval)
 {
 	u8 regandval[2] = {reg, regval};
 	int err;
@@ -108,8 +99,14 @@ int ab3100_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 regval)
 	mutex_unlock(&ab3100->access_mutex);
 	return err;
 }
-EXPORT_SYMBOL(ab3100_set_register_interruptible);
 
+static int set_register_interruptible(struct device *dev,
+	u8 bank, u8 reg, u8 value)
+{
+	struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
+
+	return ab3100_set_register_interruptible(ab3100, reg, value);
+}
 
 /*
  * The test registers exist at an I2C bus address up one
@@ -148,8 +145,8 @@ static int ab3100_set_test_register_interruptible(struct ab3100 *ab3100,
 	return err;
 }
 
-
-int ab3100_get_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 *regval)
+static int ab3100_get_register_interruptible(struct ab3100 *ab3100,
+	u8 reg, u8 *regval)
 {
 	int err;
 
@@ -203,10 +200,16 @@ int ab3100_get_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 *regval)
 	mutex_unlock(&ab3100->access_mutex);
 	return err;
 }
-EXPORT_SYMBOL(ab3100_get_register_interruptible);
 
+static int get_register_interruptible(struct device *dev, u8 bank, u8 reg,
+	u8 *value)
+{
+	struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
+
+	return ab3100_get_register_interruptible(ab3100, reg, value);
+}
 
-int ab3100_get_register_page_interruptible(struct ab3100 *ab3100,
+static int ab3100_get_register_page_interruptible(struct ab3100 *ab3100,
 			     u8 first_reg, u8 *regvals, u8 numregs)
 {
 	int err;
@@ -260,10 +263,17 @@ int ab3100_get_register_page_interruptible(struct ab3100 *ab3100,
 	mutex_unlock(&ab3100->access_mutex);
 	return err;
 }
-EXPORT_SYMBOL(ab3100_get_register_page_interruptible);
 
+static int get_register_page_interruptible(struct device *dev, u8 bank,
+	u8 first_reg, u8 *regvals, u8 numregs)
+{
+	struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
+
+	return ab3100_get_register_page_interruptible(ab3100,
+			first_reg, regvals, numregs);
+}
 
-int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100,
+static int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100,
 				 u8 reg, u8 andmask, u8 ormask)
 {
 	u8 regandval[2] = {reg, 0};
@@ -331,8 +341,15 @@ int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100,
 	mutex_unlock(&ab3100->access_mutex);
 	return err;
 }
-EXPORT_SYMBOL(ab3100_mask_and_set_register_interruptible);
 
+static int mask_and_set_register_interruptible(struct device *dev, u8 bank,
+	u8 reg, u8 bitmask, u8 bitvalues)
+{
+	struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
+
+	return ab3100_mask_and_set_register_interruptible(ab3100,
+			reg, bitmask, (bitmask & bitvalues));
+}
 
 /*
  * Register a simple callback for handling any AB3100 events.
@@ -357,15 +374,27 @@ int ab3100_event_unregister(struct ab3100 *ab3100,
 EXPORT_SYMBOL(ab3100_event_unregister);
 
 
-int ab3100_event_registers_startup_state_get(struct ab3100 *ab3100,
-					     u32 *fatevent)
+static int ab3100_event_registers_startup_state_get(struct device *dev,
+					     u8 *event)
 {
+	struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
 	if (!ab3100->startup_events_read)
 		return -EAGAIN; /* Try again later */
-	*fatevent = ab3100->startup_events;
+	memcpy(event, ab3100->startup_events, 3);
 	return 0;
 }
-EXPORT_SYMBOL(ab3100_event_registers_startup_state_get);
+
+static struct abx500_ops ab3100_ops = {
+	.get_chip_id = ab3100_get_chip_id,
+	.set_register = set_register_interruptible,
+	.get_register = get_register_interruptible,
+	.get_register_page = get_register_page_interruptible,
+	.set_register_page = NULL,
+	.mask_and_set_register = mask_and_set_register_interruptible,
+	.event_registers_startup_state_get =
+		ab3100_event_registers_startup_state_get,
+	.startup_irq_enabled = NULL,
+};
 
 /*
  * This is a threaded interrupt handler so we can make some
@@ -390,7 +419,9 @@ static irqreturn_t ab3100_irq_handler(int irq, void *data)
 		event_regs[2];
 
 	if (!ab3100->startup_events_read) {
-		ab3100->startup_events = fatevent;
+		ab3100->startup_events[0] = event_regs[0];
+		ab3100->startup_events[1] = event_regs[1];
+		ab3100->startup_events[2] = event_regs[2];
 		ab3100->startup_events_read = true;
 	}
 	/*
@@ -703,7 +734,8 @@ static int __init ab3100_setup(struct ab3100 *ab3100)
 		dev_warn(ab3100->dev,
 			 "AB3100 P1E variant detected, "
 			 "forcing chip to 32KHz\n");
-		err = ab3100_set_test_register_interruptible(ab3100, 0x02, 0x08);
+		err = ab3100_set_test_register_interruptible(ab3100,
+			0x02, 0x08);
 	}
 
  exit_no_setup:
@@ -898,6 +930,10 @@ static int __init ab3100_probe(struct i2c_client *client,
 	if (err)
 		goto exit_no_irq;
 
+	err = abx500_register_ops(&client->dev, &ab3100_ops);
+	if (err)
+		goto exit_no_ops;
+
 	/* Set parent and a pointer back to the container in device data */
 	for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++) {
 		ab3100_platform_devs[i]->dev.parent =
@@ -915,11 +951,13 @@ static int __init ab3100_probe(struct i2c_client *client,
 
 	return 0;
 
+ exit_no_ops:
  exit_no_irq:
  exit_no_setup:
 	i2c_unregister_device(ab3100->testreg_client);
  exit_no_testreg_client:
  exit_no_detect:
+	i2c_set_clientdata(client, NULL);
 	kfree(ab3100);
 	return err;
 }
@@ -941,6 +979,7 @@ static int __exit ab3100_remove(struct i2c_client *client)
 	 * their notifiers so deactivate IRQ
 	 */
 	free_irq(client->irq, ab3100);
+	i2c_set_clientdata(client, NULL);
 	kfree(ab3100);
 	return 0;
 }
diff --git a/drivers/mfd/ab3100-otp.c b/drivers/mfd/ab3100-otp.c
index 2d14655fdeb..63d2b727ddb 100644
--- a/drivers/mfd/ab3100-otp.c
+++ b/drivers/mfd/ab3100-otp.c
@@ -12,7 +12,7 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mfd/ab3100.h>
+#include <linux/mfd/abx500.h>
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 
@@ -30,7 +30,6 @@
 /**
  * struct ab3100_otp
  * @dev containing device
- * @ab3100 a pointer to the parent ab3100 device struct
  * @locked whether the OTP is locked, after locking, no more bits
  *       can be changed but before locking it is still possible
  *       to change bits from 1->0.
@@ -49,7 +48,6 @@
  */
 struct ab3100_otp {
 	struct device *dev;
-	struct ab3100 *ab3100;
 	bool locked;
 	u32 freq;
 	bool paf;
@@ -63,19 +61,19 @@ struct ab3100_otp {
 
 static int __init ab3100_otp_read(struct ab3100_otp *otp)
 {
-	struct ab3100 *ab = otp->ab3100;
 	u8 otpval[8];
 	u8 otpp;
 	int err;
 
-	err = ab3100_get_register_interruptible(ab, AB3100_OTPP, &otpp);
+	err = abx500_get_register_interruptible(otp->dev, 0,
+		AB3100_OTPP, &otpp);
 	if (err) {
 		dev_err(otp->dev, "unable to read OTPP register\n");
 		return err;
 	}
 
-	err = ab3100_get_register_page_interruptible(ab, AB3100_OTP0,
-						     otpval, 8);
+	err = abx500_get_register_page_interruptible(otp->dev, 0,
+		AB3100_OTP0, otpval, 8);
 	if (err) {
 		dev_err(otp->dev, "unable to read OTP register page\n");
 		return err;
@@ -197,7 +195,6 @@ static int __init ab3100_otp_probe(struct platform_device *pdev)
 	otp->dev = &pdev->dev;
 
 	/* Replace platform data coming in with a local struct */
-	otp->ab3100 = platform_get_drvdata(pdev);
 	platform_set_drvdata(pdev, otp);
 
 	err = ab3100_otp_read(otp);
diff --git a/drivers/mfd/ab3550-core.c b/drivers/mfd/ab3550-core.c
new file mode 100644
index 00000000000..1060f8e1c40
--- /dev/null
+++ b/drivers/mfd/ab3550-core.c
@@ -0,0 +1,1401 @@
+/*
+ * Copyright (C) 2007-2010 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Low-level core for exclusive access to the AB3550 IC on the I2C bus
+ * and some basic chip-configuration.
+ * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
+ * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com>
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/random.h>
+#include <linux/workqueue.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
+#include <linux/mfd/abx500.h>
+#include <linux/list.h>
+#include <linux/bitops.h>
+#include <linux/spinlock.h>
+#include <linux/mfd/core.h>
+
+#define AB3550_NAME_STRING "ab3550"
+#define AB3550_ID_FORMAT_STRING "AB3550 %s"
+#define AB3550_NUM_BANKS 2
+#define AB3550_NUM_EVENT_REG 5
+
+/* These are the only registers inside AB3550 used in this main file */
+
+/* Chip ID register */
+#define AB3550_CID_REG           0x20
+
+/* Interrupt event registers */
+#define AB3550_EVENT_BANK        0
+#define AB3550_EVENT_REG         0x22
+
+/* Read/write operation values. */
+#define AB3550_PERM_RD (0x01)
+#define AB3550_PERM_WR (0x02)
+
+/* Read/write permissions. */
+#define AB3550_PERM_RO (AB3550_PERM_RD)
+#define AB3550_PERM_RW (AB3550_PERM_RD | AB3550_PERM_WR)
+
+/**
+ * struct ab3550
+ * @access_mutex: lock out concurrent accesses to the AB registers
+ * @i2c_client: I2C client for this chip
+ * @chip_name: name of this chip variant
+ * @chip_id: 8 bit chip ID for this chip variant
+ * @mask_work: a worker for writing to mask registers
+ * @event_lock: a lock to protect the event_mask
+ * @event_mask: a local copy of the mask event registers
+ * @startup_events: a copy of the first reading of the event registers
+ * @startup_events_read: whether the first events have been read
+ */
+struct ab3550 {
+	struct mutex access_mutex;
+	struct i2c_client *i2c_client[AB3550_NUM_BANKS];
+	char chip_name[32];
+	u8 chip_id;
+	struct work_struct mask_work;
+	spinlock_t event_lock;
+	u8 event_mask[AB3550_NUM_EVENT_REG];
+	u8 startup_events[AB3550_NUM_EVENT_REG];
+	bool startup_events_read;
+#ifdef CONFIG_DEBUG_FS
+	unsigned int debug_bank;
+	unsigned int debug_address;
+#endif
+};
+
+/**
+ * struct ab3550_reg_range
+ * @first: the first address of the range
+ * @last: the last address of the range
+ * @perm: access permissions for the range
+ */
+struct ab3550_reg_range {
+	u8 first;
+	u8 last;
+	u8 perm;
+};
+
+/**
+ * struct ab3550_reg_ranges
+ * @count: the number of ranges in the list
+ * @range: the list of register ranges
+ */
+struct ab3550_reg_ranges {
+	u8 count;
+	const struct ab3550_reg_range *range;
+};
+
+/*
+ * Permissible register ranges for reading and writing per device and bank.
+ *
+ * The ranges must be listed in increasing address order, and no overlaps are
+ * allowed. It is assumed that write permission implies read permission
+ * (i.e. only RO and RW permissions should be used).  Ranges with write
+ * permission must not be split up.
+ */
+
+#define NO_RANGE {.count = 0, .range = NULL,}
+
+static struct
+ab3550_reg_ranges ab3550_reg_ranges[AB3550_NUM_DEVICES][AB3550_NUM_BANKS] = {
+	[AB3550_DEVID_DAC] = {
+		NO_RANGE,
+		{
+			.count = 2,
+			.range = (struct ab3550_reg_range[]) {
+				{
+					.first = 0xb0,
+					.last = 0xba,
+					.perm = AB3550_PERM_RW,
+				},
+				{
+					.first = 0xbc,
+					.last = 0xc3,
+					.perm = AB3550_PERM_RW,
+				},
+			},
+		},
+	},
+	[AB3550_DEVID_LEDS] = {
+		NO_RANGE,
+		{
+			.count = 2,
+			.range = (struct ab3550_reg_range[]) {
+				{
+					.first = 0x5a,
+					.last = 0x88,
+					.perm = AB3550_PERM_RW,
+				},
+				{
+					.first = 0x8a,
+					.last = 0xad,
+					.perm = AB3550_PERM_RW,
+				},
+			}
+		},
+	},
+	[AB3550_DEVID_POWER] = {
+		{
+			.count = 1,
+			.range = (struct ab3550_reg_range[]) {
+				{
+					.first = 0x21,
+					.last = 0x21,
+					.perm = AB3550_PERM_RO,
+				},
+			}
+		},
+		NO_RANGE,
+	},
+	[AB3550_DEVID_REGULATORS] = {
+		{
+			.count = 1,
+			.range = (struct ab3550_reg_range[]) {
+				{
+					.first = 0x69,
+					.last = 0xa3,
+					.perm = AB3550_PERM_RW,
+				},
+			}
+		},
+		{
+			.count = 1,
+			.range = (struct ab3550_reg_range[]) {
+				{
+					.first = 0x14,
+					.last = 0x16,
+					.perm = AB3550_PERM_RW,
+				},
+			}
+		},
+	},
+	[AB3550_DEVID_SIM] = {
+		{
+			.count = 1,
+			.range = (struct ab3550_reg_range[]) {
+				{
+					.first = 0x21,
+					.last = 0x21,
+					.perm = AB3550_PERM_RO,
+				},
+			}
+		},
+		{
+			.count = 1,
+			.range = (struct ab3550_reg_range[]) {
+				{
+					.first = 0x14,
+					.last = 0x17,
+					.perm = AB3550_PERM_RW,
+				},
+			}
+
+		},
+	},
+	[AB3550_DEVID_UART] = {
+		NO_RANGE,
+		NO_RANGE,
+	},
+	[AB3550_DEVID_RTC] = {
+		{
+			.count = 1,
+			.range = (struct ab3550_reg_range[]) {
+				{
+					.first = 0x00,
+					.last = 0x0c,
+					.perm = AB3550_PERM_RW,
+				},
+			}
+		},
+		NO_RANGE,
+	},
+	[AB3550_DEVID_CHARGER] = {
+		{
+			.count = 2,
+			.range = (struct ab3550_reg_range[]) {
+				{
+					.first = 0x10,
+					.last = 0x1a,
+					.perm = AB3550_PERM_RW,
+				},
+				{
+					.first = 0x21,
+					.last = 0x21,
+					.perm = AB3550_PERM_RO,
+				},
+			}
+		},
+		NO_RANGE,
+	},
+	[AB3550_DEVID_ADC] = {
+		NO_RANGE,
+		{
+			.count = 1,
+			.range = (struct ab3550_reg_range[]) {
+				{
+					.first = 0x20,
+					.last = 0x56,
+					.perm = AB3550_PERM_RW,
+				},
+
+			}
+		},
+	},
+	[AB3550_DEVID_FUELGAUGE] = {
+		{
+			.count = 1,
+			.range = (struct ab3550_reg_range[]) {
+				{
+					.first = 0x21,
+					.last = 0x21,
+					.perm = AB3550_PERM_RO,
+				},
+			}
+		},
+		{
+			.count = 1,
+			.range = (struct ab3550_reg_range[]) {
+				{
+					.first = 0x00,
+					.last = 0x0e,
+					.perm = AB3550_PERM_RW,
+				},
+			}
+		},
+	},
+	[AB3550_DEVID_VIBRATOR] = {
+		NO_RANGE,
+		{
+			.count = 1,
+			.range = (struct ab3550_reg_range[]) {
+				{
+					.first = 0x10,
+					.last = 0x13,
+					.perm = AB3550_PERM_RW,
+				},
+
+			}
+		},
+	},
+	[AB3550_DEVID_CODEC] = {
+		{
+			.count = 2,
+			.range = (struct ab3550_reg_range[]) {
+				{
+					.first = 0x31,
+					.last = 0x63,
+					.perm = AB3550_PERM_RW,
+				},
+				{
+					.first = 0x65,
+					.last = 0x68,
+					.perm = AB3550_PERM_RW,
+				},
+			}
+		},
+		NO_RANGE,
+	},
+};
+
+static struct mfd_cell ab3550_devs[AB3550_NUM_DEVICES] = {
+	[AB3550_DEVID_DAC] = {
+		.name = "ab3550-dac",
+		.id = AB3550_DEVID_DAC,
+		.num_resources = 0,
+	},
+	[AB3550_DEVID_LEDS] = {
+		.name = "ab3550-leds",
+		.id = AB3550_DEVID_LEDS,
+	},
+	[AB3550_DEVID_POWER] = {
+		.name = "ab3550-power",
+		.id = AB3550_DEVID_POWER,
+	},
+	[AB3550_DEVID_REGULATORS] = {
+		.name = "ab3550-regulators",
+		.id = AB3550_DEVID_REGULATORS,
+	},
+	[AB3550_DEVID_SIM] = {
+		.name = "ab3550-sim",
+		.id = AB3550_DEVID_SIM,
+	},
+	[AB3550_DEVID_UART] = {
+		.name = "ab3550-uart",
+		.id = AB3550_DEVID_UART,
+	},
+	[AB3550_DEVID_RTC] = {
+		.name = "ab3550-rtc",
+		.id = AB3550_DEVID_RTC,
+	},
+	[AB3550_DEVID_CHARGER] = {
+		.name = "ab3550-charger",
+		.id = AB3550_DEVID_CHARGER,
+	},
+	[AB3550_DEVID_ADC] = {
+		.name = "ab3550-adc",
+		.id = AB3550_DEVID_ADC,
+		.num_resources = 10,
+		.resources = (struct resource[]) {
+			{
+				.name = "TRIGGER-0",
+				.flags = IORESOURCE_IRQ,
+				.start = 16,
+				.end = 16,
+			},
+			{
+				.name = "TRIGGER-1",
+				.flags = IORESOURCE_IRQ,
+				.start = 17,
+				.end = 17,
+			},
+			{
+				.name = "TRIGGER-2",
+				.flags = IORESOURCE_IRQ,
+				.start = 18,
+				.end = 18,
+			},
+			{
+				.name = "TRIGGER-3",
+				.flags = IORESOURCE_IRQ,
+				.start = 19,
+				.end = 19,
+			},
+			{
+				.name = "TRIGGER-4",
+				.flags = IORESOURCE_IRQ,
+				.start = 20,
+				.end = 20,
+			},
+			{
+				.name = "TRIGGER-5",
+				.flags = IORESOURCE_IRQ,
+				.start = 21,
+				.end = 21,
+			},
+			{
+				.name = "TRIGGER-6",
+				.flags = IORESOURCE_IRQ,
+				.start = 22,
+				.end = 22,
+			},
+			{
+				.name = "TRIGGER-7",
+				.flags = IORESOURCE_IRQ,
+				.start = 23,
+				.end = 23,
+			},
+			{
+				.name = "TRIGGER-VBAT-TXON",
+				.flags = IORESOURCE_IRQ,
+				.start = 13,
+				.end = 13,
+			},
+			{
+				.name = "TRIGGER-VBAT",
+				.flags = IORESOURCE_IRQ,
+				.start = 12,
+				.end = 12,
+			},
+		},
+	},
+	[AB3550_DEVID_FUELGAUGE] = {
+		.name = "ab3550-fuelgauge",
+		.id = AB3550_DEVID_FUELGAUGE,
+	},
+	[AB3550_DEVID_VIBRATOR] = {
+		.name = "ab3550-vibrator",
+		.id = AB3550_DEVID_VIBRATOR,
+	},
+	[AB3550_DEVID_CODEC] = {
+		.name = "ab3550-codec",
+		.id = AB3550_DEVID_CODEC,
+	},
+};
+
+/*
+ * I2C transactions with error messages.
+ */
+static int ab3550_i2c_master_send(struct ab3550 *ab, u8 bank, u8 *data,
+	u8 count)
+{
+	int err;
+
+	err = i2c_master_send(ab->i2c_client[bank], data, count);
+	if (err < 0) {
+		dev_err(&ab->i2c_client[0]->dev, "send error: %d\n", err);
+		return err;
+	}
+	return 0;
+}
+
+static int ab3550_i2c_master_recv(struct ab3550 *ab, u8 bank, u8 *data,
+	u8 count)
+{
+	int err;
+
+	err = i2c_master_recv(ab->i2c_client[bank], data, count);
+	if (err < 0) {
+		dev_err(&ab->i2c_client[0]->dev, "receive error: %d\n", err);
+		return err;
+	}
+	return 0;
+}
+
+/*
+ * Functionality for getting/setting register values.
+ */
+static int get_register_interruptible(struct ab3550 *ab, u8 bank, u8 reg,
+	u8 *value)
+{
+	int err;
+
+	err = mutex_lock_interruptible(&ab->access_mutex);
+	if (err)
+		return err;
+
+	err = ab3550_i2c_master_send(ab, bank, &reg, 1);
+	if (!err)
+		err = ab3550_i2c_master_recv(ab, bank, value, 1);
+
+	mutex_unlock(&ab->access_mutex);
+	return err;
+}
+
+static int get_register_page_interruptible(struct ab3550 *ab, u8 bank,
+	u8 first_reg, u8 *regvals, u8 numregs)
+{
+	int err;
+
+	err = mutex_lock_interruptible(&ab->access_mutex);
+	if (err)
+		return err;
+
+	err = ab3550_i2c_master_send(ab, bank, &first_reg, 1);
+	if (!err)
+		err = ab3550_i2c_master_recv(ab, bank, regvals, numregs);
+
+	mutex_unlock(&ab->access_mutex);
+	return err;
+}
+
+static int mask_and_set_register_interruptible(struct ab3550 *ab, u8 bank,
+	u8 reg, u8 bitmask, u8 bitvalues)
+{
+	int err = 0;
+
+	if (likely(bitmask)) {
+		u8 reg_bits[2] = {reg, 0};
+
+		err = mutex_lock_interruptible(&ab->access_mutex);
+		if (err)
+			return err;
+
+		if (bitmask == 0xFF) /* No need to read in this case. */
+			reg_bits[1] = bitvalues;
+		else { /* Read and modify the register value. */
+			u8 bits;
+
+			err = ab3550_i2c_master_send(ab, bank, &reg, 1);
+			if (err)
+				goto unlock_and_return;
+			err = ab3550_i2c_master_recv(ab, bank, &bits, 1);
+			if (err)
+				goto unlock_and_return;
+			reg_bits[1] = ((~bitmask & bits) |
+				(bitmask & bitvalues));
+		}
+		/* Write the new value. */
+		err = ab3550_i2c_master_send(ab, bank, reg_bits, 2);
+unlock_and_return:
+		mutex_unlock(&ab->access_mutex);
+	}
+	return err;
+}
+
+/*
+ * Read/write permission checking functions.
+ */
+static bool page_write_allowed(const struct ab3550_reg_ranges *ranges,
+	u8 first_reg, u8 last_reg)
+{
+	u8 i;
+
+	if (last_reg < first_reg)
+		return false;
+
+	for (i = 0; i < ranges->count; i++) {
+		if (first_reg < ranges->range[i].first)
+			break;
+		if ((last_reg <= ranges->range[i].last) &&
+			(ranges->range[i].perm & AB3550_PERM_WR))
+			return true;
+	}
+	return false;
+}
+
+static bool reg_write_allowed(const struct ab3550_reg_ranges *ranges, u8 reg)
+{
+	return page_write_allowed(ranges, reg, reg);
+}
+
+static bool page_read_allowed(const struct ab3550_reg_ranges *ranges,
+	u8 first_reg, u8 last_reg)
+{
+	u8 i;
+
+	if (last_reg < first_reg)
+		return false;
+	/* Find the range (if it exists in the list) that includes first_reg. */
+	for (i = 0; i < ranges->count; i++) {
+		if (first_reg < ranges->range[i].first)
+			return false;
+		if (first_reg <= ranges->range[i].last)
+			break;
+	}
+	/* Make sure that the entire range up to and including last_reg is
+	 * readable. This may span several of the ranges in the list.
+	 */
+	while ((i < ranges->count) &&
+		(ranges->range[i].perm & AB3550_PERM_RD)) {
+		if (last_reg <= ranges->range[i].last)
+			return true;
+		if ((++i >= ranges->count) ||
+			(ranges->range[i].first !=
+			 (ranges->range[i - 1].last + 1))) {
+			break;
+		}
+	}
+	return false;
+}
+
+static bool reg_read_allowed(const struct ab3550_reg_ranges *ranges, u8 reg)
+{
+	return page_read_allowed(ranges, reg, reg);
+}
+
+/*
+ * The exported register access functionality.
+ */
+int ab3550_get_chip_id(struct device *dev)
+{
+	struct ab3550 *ab = dev_get_drvdata(dev->parent);
+	return (int)ab->chip_id;
+}
+
+int ab3550_mask_and_set_register_interruptible(struct device *dev, u8 bank,
+	u8 reg, u8 bitmask, u8 bitvalues)
+{
+	struct ab3550 *ab;
+	struct platform_device *pdev = to_platform_device(dev);
+
+	if ((AB3550_NUM_BANKS <= bank) ||
+		!reg_write_allowed(&ab3550_reg_ranges[pdev->id][bank], reg))
+		return -EINVAL;
+
+	ab = dev_get_drvdata(dev->parent);
+	return mask_and_set_register_interruptible(ab, bank, reg,
+		bitmask, bitvalues);
+}
+
+int ab3550_set_register_interruptible(struct device *dev, u8 bank, u8 reg,
+	u8 value)
+{
+	return ab3550_mask_and_set_register_interruptible(dev, bank, reg, 0xFF,
+		value);
+}
+
+int ab3550_get_register_interruptible(struct device *dev, u8 bank, u8 reg,
+	u8 *value)
+{
+	struct ab3550 *ab;
+	struct platform_device *pdev = to_platform_device(dev);
+
+	if ((AB3550_NUM_BANKS <= bank) ||
+		!reg_read_allowed(&ab3550_reg_ranges[pdev->id][bank], reg))
+		return -EINVAL;
+
+	ab = dev_get_drvdata(dev->parent);
+	return get_register_interruptible(ab, bank, reg, value);
+}
+
+int ab3550_get_register_page_interruptible(struct device *dev, u8 bank,
+	u8 first_reg, u8 *regvals, u8 numregs)
+{
+	struct ab3550 *ab;
+	struct platform_device *pdev = to_platform_device(dev);
+
+	if ((AB3550_NUM_BANKS <= bank) ||
+		!page_read_allowed(&ab3550_reg_ranges[pdev->id][bank],
+			first_reg, (first_reg + numregs - 1)))
+		return -EINVAL;
+
+	ab = dev_get_drvdata(dev->parent);
+	return get_register_page_interruptible(ab, bank, first_reg, regvals,
+		numregs);
+}
+
+int ab3550_event_registers_startup_state_get(struct device *dev, u8 *event)
+{
+	struct ab3550 *ab;
+
+	ab = dev_get_drvdata(dev->parent);
+	if (!ab->startup_events_read)
+		return -EAGAIN; /* Try again later */
+
+	memcpy(event, ab->startup_events, AB3550_NUM_EVENT_REG);
+	return 0;
+}
+
+int ab3550_startup_irq_enabled(struct device *dev, unsigned int irq)
+{
+	struct ab3550 *ab;
+	struct ab3550_platform_data *plf_data;
+	bool val;
+
+	ab = get_irq_chip_data(irq);
+	plf_data = ab->i2c_client[0]->dev.platform_data;
+	irq -= plf_data->irq.base;
+	val = ((ab->startup_events[irq / 8] & BIT(irq % 8)) != 0);
+
+	return val;
+}
+
+static struct abx500_ops ab3550_ops = {
+	.get_chip_id = ab3550_get_chip_id,
+	.get_register = ab3550_get_register_interruptible,
+	.set_register = ab3550_set_register_interruptible,
+	.get_register_page = ab3550_get_register_page_interruptible,
+	.set_register_page = NULL,
+	.mask_and_set_register = ab3550_mask_and_set_register_interruptible,
+	.event_registers_startup_state_get =
+		ab3550_event_registers_startup_state_get,
+	.startup_irq_enabled = ab3550_startup_irq_enabled,
+};
+
+static irqreturn_t ab3550_irq_handler(int irq, void *data)
+{
+	struct ab3550 *ab = data;
+	int err;
+	unsigned int i;
+	u8 e[AB3550_NUM_EVENT_REG];
+	u8 *events;
+	unsigned long flags;
+
+	events = (ab->startup_events_read ? e : ab->startup_events);
+
+	err = get_register_page_interruptible(ab, AB3550_EVENT_BANK,
+		AB3550_EVENT_REG, events, AB3550_NUM_EVENT_REG);
+	if (err)
+		goto err_event_rd;
+
+	if (!ab->startup_events_read) {
+		dev_info(&ab->i2c_client[0]->dev,
+			"startup events 0x%x,0x%x,0x%x,0x%x,0x%x\n",
+			ab->startup_events[0], ab->startup_events[1],
+			ab->startup_events[2], ab->startup_events[3],
+			ab->startup_events[4]);
+		ab->startup_events_read = true;
+		goto out;
+	}
+
+	/* The two highest bits in event[4] are not used. */
+	events[4] &= 0x3f;
+
+	spin_lock_irqsave(&ab->event_lock, flags);
+	for (i = 0; i < AB3550_NUM_EVENT_REG; i++)
+		events[i] &= ~ab->event_mask[i];
+	spin_unlock_irqrestore(&ab->event_lock, flags);
+
+	for (i = 0; i < AB3550_NUM_EVENT_REG; i++) {
+		u8 bit;
+		u8 event_reg;
+
+		dev_dbg(&ab->i2c_client[0]->dev, "IRQ Event[%d]: 0x%2x\n",
+			i, events[i]);
+
+		event_reg = events[i];
+		for (bit = 0; event_reg; bit++, event_reg /= 2) {
+			if (event_reg % 2) {
+				unsigned int irq;
+				struct ab3550_platform_data *plf_data;
+
+				plf_data = ab->i2c_client[0]->dev.platform_data;
+				irq = plf_data->irq.base + (i * 8) + bit;
+				handle_nested_irq(irq);
+			}
+		}
+	}
+out:
+	return IRQ_HANDLED;
+
+err_event_rd:
+	dev_dbg(&ab->i2c_client[0]->dev, "error reading event registers\n");
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static struct ab3550_reg_ranges debug_ranges[AB3550_NUM_BANKS] = {
+	{
+		.count = 6,
+		.range = (struct ab3550_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x0e,
+			},
+			{
+				.first = 0x10,
+				.last = 0x1a,
+			},
+			{
+				.first = 0x1e,
+				.last = 0x4f,
+			},
+			{
+				.first = 0x51,
+				.last = 0x63,
+			},
+			{
+				.first = 0x65,
+				.last = 0xa3,
+			},
+			{
+				.first = 0xa5,
+				.last = 0xa8,
+			},
+		}
+	},
+	{
+		.count = 8,
+		.range = (struct ab3550_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x0e,
+			},
+			{
+				.first = 0x10,
+				.last = 0x17,
+			},
+			{
+				.first = 0x1a,
+				.last = 0x1c,
+			},
+			{
+				.first = 0x20,
+				.last = 0x56,
+			},
+			{
+				.first = 0x5a,
+				.last = 0x88,
+			},
+			{
+				.first = 0x8a,
+				.last = 0xad,
+			},
+			{
+				.first = 0xb0,
+				.last = 0xba,
+			},
+			{
+				.first = 0xbc,
+				.last = 0xc3,
+			},
+		}
+	},
+};
+
+static int ab3550_registers_print(struct seq_file *s, void *p)
+{
+	struct ab3550 *ab = s->private;
+	int bank;
+
+	seq_printf(s, AB3550_NAME_STRING " register values:\n");
+
+	for (bank = 0; bank < AB3550_NUM_BANKS; bank++) {
+		unsigned int i;
+
+		seq_printf(s, " bank %d:\n", bank);
+		for (i = 0; i < debug_ranges[bank].count; i++) {
+			u8 reg;
+
+			for (reg = debug_ranges[bank].range[i].first;
+				reg <= debug_ranges[bank].range[i].last;
+				reg++) {
+				u8 value;
+
+				get_register_interruptible(ab, bank, reg,
+					&value);
+				seq_printf(s, "  [%d/0x%02X]: 0x%02X\n", bank,
+					reg, value);
+			}
+		}
+	}
+	return 0;
+}
+
+static int ab3550_registers_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab3550_registers_print, inode->i_private);
+}
+
+static const struct file_operations ab3550_registers_fops = {
+	.open = ab3550_registers_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab3550_bank_print(struct seq_file *s, void *p)
+{
+	struct ab3550 *ab = s->private;
+
+	seq_printf(s, "%d\n", ab->debug_bank);
+	return 0;
+}
+
+static int ab3550_bank_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab3550_bank_print, inode->i_private);
+}
+
+static ssize_t ab3550_bank_write(struct file *file,
+	const char __user *user_buf,
+	size_t count, loff_t *ppos)
+{
+	struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private;
+	char buf[32];
+	int buf_size;
+	unsigned long user_bank;
+	int err;
+
+	/* Get userspace string and assure termination */
+	buf_size = min(count, (sizeof(buf) - 1));
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	buf[buf_size] = 0;
+
+	err = strict_strtoul(buf, 0, &user_bank);
+	if (err)
+		return -EINVAL;
+
+	if (user_bank >= AB3550_NUM_BANKS) {
+		dev_err(&ab->i2c_client[0]->dev,
+			"debugfs error input > number of banks\n");
+		return -EINVAL;
+	}
+
+	ab->debug_bank = user_bank;
+
+	return buf_size;
+}
+
+static int ab3550_address_print(struct seq_file *s, void *p)
+{
+	struct ab3550 *ab = s->private;
+
+	seq_printf(s, "0x%02X\n", ab->debug_address);
+	return 0;
+}
+
+static int ab3550_address_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab3550_address_print, inode->i_private);
+}
+
+static ssize_t ab3550_address_write(struct file *file,
+	const char __user *user_buf,
+	size_t count, loff_t *ppos)
+{
+	struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private;
+	char buf[32];
+	int buf_size;
+	unsigned long user_address;
+	int err;
+
+	/* Get userspace string and assure termination */
+	buf_size = min(count, (sizeof(buf) - 1));
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	buf[buf_size] = 0;
+
+	err = strict_strtoul(buf, 0, &user_address);
+	if (err)
+		return -EINVAL;
+	if (user_address > 0xff) {
+		dev_err(&ab->i2c_client[0]->dev,
+			"debugfs error input > 0xff\n");
+		return -EINVAL;
+	}
+	ab->debug_address = user_address;
+	return buf_size;
+}
+
+static int ab3550_val_print(struct seq_file *s, void *p)
+{
+	struct ab3550 *ab = s->private;
+	int err;
+	u8 regvalue;
+
+	err = get_register_interruptible(ab, (u8)ab->debug_bank,
+		(u8)ab->debug_address, &regvalue);
+	if (err)
+		return -EINVAL;
+	seq_printf(s, "0x%02X\n", regvalue);
+
+	return 0;
+}
+
+static int ab3550_val_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab3550_val_print, inode->i_private);
+}
+
+static ssize_t ab3550_val_write(struct file *file,
+	const char __user *user_buf,
+	size_t count, loff_t *ppos)
+{
+	struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private;
+	char buf[32];
+	int buf_size;
+	unsigned long user_val;
+	int err;
+	u8 regvalue;
+
+	/* Get userspace string and assure termination */
+	buf_size = min(count, (sizeof(buf)-1));
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	buf[buf_size] = 0;
+
+	err = strict_strtoul(buf, 0, &user_val);
+	if (err)
+		return -EINVAL;
+	if (user_val > 0xff) {
+		dev_err(&ab->i2c_client[0]->dev,
+			"debugfs error input > 0xff\n");
+		return -EINVAL;
+	}
+	err = mask_and_set_register_interruptible(
+		ab, (u8)ab->debug_bank,
+		(u8)ab->debug_address, 0xFF, (u8)user_val);
+	if (err)
+		return -EINVAL;
+
+	get_register_interruptible(ab, (u8)ab->debug_bank,
+		(u8)ab->debug_address, &regvalue);
+	if (err)
+		return -EINVAL;
+
+	return buf_size;
+}
+
+static const struct file_operations ab3550_bank_fops = {
+	.open = ab3550_bank_open,
+	.write = ab3550_bank_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static const struct file_operations ab3550_address_fops = {
+	.open = ab3550_address_open,
+	.write = ab3550_address_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static const struct file_operations ab3550_val_fops = {
+	.open = ab3550_val_open,
+	.write = ab3550_val_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static struct dentry *ab3550_dir;
+static struct dentry *ab3550_reg_file;
+static struct dentry *ab3550_bank_file;
+static struct dentry *ab3550_address_file;
+static struct dentry *ab3550_val_file;
+
+static inline void ab3550_setup_debugfs(struct ab3550 *ab)
+{
+	ab->debug_bank = 0;
+	ab->debug_address = 0x00;
+
+	ab3550_dir = debugfs_create_dir(AB3550_NAME_STRING, NULL);
+	if (!ab3550_dir)
+		goto exit_no_debugfs;
+
+	ab3550_reg_file = debugfs_create_file("all-registers",
+		S_IRUGO, ab3550_dir, ab, &ab3550_registers_fops);
+	if (!ab3550_reg_file)
+		goto exit_destroy_dir;
+
+	ab3550_bank_file = debugfs_create_file("register-bank",
+		(S_IRUGO | S_IWUGO), ab3550_dir, ab, &ab3550_bank_fops);
+	if (!ab3550_bank_file)
+		goto exit_destroy_reg;
+
+	ab3550_address_file = debugfs_create_file("register-address",
+		(S_IRUGO | S_IWUGO), ab3550_dir, ab, &ab3550_address_fops);
+	if (!ab3550_address_file)
+		goto exit_destroy_bank;
+
+	ab3550_val_file = debugfs_create_file("register-value",
+		(S_IRUGO | S_IWUGO), ab3550_dir, ab, &ab3550_val_fops);
+	if (!ab3550_val_file)
+		goto exit_destroy_address;
+
+	return;
+
+exit_destroy_address:
+	debugfs_remove(ab3550_address_file);
+exit_destroy_bank:
+	debugfs_remove(ab3550_bank_file);
+exit_destroy_reg:
+	debugfs_remove(ab3550_reg_file);
+exit_destroy_dir:
+	debugfs_remove(ab3550_dir);
+exit_no_debugfs:
+	dev_err(&ab->i2c_client[0]->dev, "failed to create debugfs entries.\n");
+	return;
+}
+
+static inline void ab3550_remove_debugfs(void)
+{
+	debugfs_remove(ab3550_val_file);
+	debugfs_remove(ab3550_address_file);
+	debugfs_remove(ab3550_bank_file);
+	debugfs_remove(ab3550_reg_file);
+	debugfs_remove(ab3550_dir);
+}
+
+#else /* !CONFIG_DEBUG_FS */
+static inline void ab3550_setup_debugfs(struct ab3550 *ab)
+{
+}
+static inline void ab3550_remove_debugfs(void)
+{
+}
+#endif
+
+/*
+ * Basic set-up, datastructure creation/destruction and I2C interface.
+ * This sets up a default config in the AB3550 chip so that it
+ * will work as expected.
+ */
+static int __init ab3550_setup(struct ab3550 *ab)
+{
+	int err = 0;
+	int i;
+	struct ab3550_platform_data *plf_data;
+	struct abx500_init_settings *settings;
+
+	plf_data = ab->i2c_client[0]->dev.platform_data;
+	settings = plf_data->init_settings;
+
+	for (i = 0; i < plf_data->init_settings_sz; i++) {
+		err = mask_and_set_register_interruptible(ab,
+			settings[i].bank,
+			settings[i].reg,
+			0xFF, settings[i].setting);
+		if (err)
+			goto exit_no_setup;
+
+		/* If event mask register update the event mask in ab3550 */
+		if ((settings[i].bank == 0) &&
+			(AB3550_IMR1 <= settings[i].reg) &&
+			(settings[i].reg <= AB3550_IMR5)) {
+			ab->event_mask[settings[i].reg - AB3550_IMR1] =
+				settings[i].setting;
+		}
+	}
+exit_no_setup:
+	return err;
+}
+
+static void ab3550_mask_work(struct work_struct *work)
+{
+	struct ab3550 *ab = container_of(work, struct ab3550, mask_work);
+	int i;
+	unsigned long flags;
+	u8 mask[AB3550_NUM_EVENT_REG];
+
+	spin_lock_irqsave(&ab->event_lock, flags);
+	for (i = 0; i < AB3550_NUM_EVENT_REG; i++)
+		mask[i] = ab->event_mask[i];
+	spin_unlock_irqrestore(&ab->event_lock, flags);
+
+	for (i = 0; i < AB3550_NUM_EVENT_REG; i++) {
+		int err;
+
+		err = mask_and_set_register_interruptible(ab, 0,
+			(AB3550_IMR1 + i), ~0, mask[i]);
+		if (err)
+			dev_err(&ab->i2c_client[0]->dev,
+				"ab3550_mask_work failed 0x%x,0x%x\n",
+				(AB3550_IMR1 + i), mask[i]);
+	}
+}
+
+static void ab3550_mask(unsigned int irq)
+{
+	unsigned long flags;
+	struct ab3550 *ab;
+	struct ab3550_platform_data *plf_data;
+
+	ab = get_irq_chip_data(irq);
+	plf_data = ab->i2c_client[0]->dev.platform_data;
+	irq -= plf_data->irq.base;
+
+	spin_lock_irqsave(&ab->event_lock, flags);
+	ab->event_mask[irq / 8] |= BIT(irq % 8);
+	spin_unlock_irqrestore(&ab->event_lock, flags);
+
+	schedule_work(&ab->mask_work);
+}
+
+static void ab3550_unmask(unsigned int irq)
+{
+	unsigned long flags;
+	struct ab3550 *ab;
+	struct ab3550_platform_data *plf_data;
+
+	ab = get_irq_chip_data(irq);
+	plf_data = ab->i2c_client[0]->dev.platform_data;
+	irq -= plf_data->irq.base;
+
+	spin_lock_irqsave(&ab->event_lock, flags);
+	ab->event_mask[irq / 8] &= ~BIT(irq % 8);
+	spin_unlock_irqrestore(&ab->event_lock, flags);
+
+	schedule_work(&ab->mask_work);
+}
+
+static void noop(unsigned int irq)
+{
+}
+
+static struct irq_chip ab3550_irq_chip = {
+	.name		= "ab3550-core", /* Keep the same name as the request */
+	.startup	= NULL, /* defaults to enable */
+	.shutdown	= NULL, /* defaults to disable */
+	.enable		= NULL, /* defaults to unmask */
+	.disable	= ab3550_mask, /* No default to mask in chip.c */
+	.ack		= noop,
+	.mask		= ab3550_mask,
+	.unmask		= ab3550_unmask,
+	.end		= NULL,
+};
+
+struct ab_family_id {
+	u8	id;
+	char	*name;
+};
+
+static const struct ab_family_id ids[] __initdata = {
+	/* AB3550 */
+	{
+		.id = AB3550_P1A,
+		.name = "P1A"
+	},
+	/* Terminator */
+	{
+		.id = 0x00,
+	}
+};
+
+static int __init ab3550_probe(struct i2c_client *client,
+	const struct i2c_device_id *id)
+{
+	struct ab3550 *ab;
+	struct ab3550_platform_data *ab3550_plf_data =
+		client->dev.platform_data;
+	int err;
+	int i;
+	int num_i2c_clients = 0;
+
+	ab = kzalloc(sizeof(struct ab3550), GFP_KERNEL);
+	if (!ab) {
+		dev_err(&client->dev,
+			"could not allocate " AB3550_NAME_STRING " device\n");
+		return -ENOMEM;
+	}
+
+	/* Initialize data structure */
+	mutex_init(&ab->access_mutex);
+	spin_lock_init(&ab->event_lock);
+	ab->i2c_client[0] = client;
+
+	i2c_set_clientdata(client, ab);
+
+	/* Read chip ID register */
+	err = get_register_interruptible(ab, 0, AB3550_CID_REG, &ab->chip_id);
+	if (err) {
+		dev_err(&client->dev, "could not communicate with the analog "
+			"baseband chip\n");
+		goto exit_no_detect;
+	}
+
+	for (i = 0; ids[i].id != 0x0; i++) {
+		if (ids[i].id == ab->chip_id) {
+			snprintf(&ab->chip_name[0], sizeof(ab->chip_name) - 1,
+				AB3550_ID_FORMAT_STRING, ids[i].name);
+			break;
+		}
+	}
+
+	if (ids[i].id == 0x0) {
+		dev_err(&client->dev, "unknown analog baseband chip id: 0x%x\n",
+			ab->chip_id);
+		dev_err(&client->dev, "driver not started!\n");
+		goto exit_no_detect;
+	}
+
+	dev_info(&client->dev, "detected AB chip: %s\n", &ab->chip_name[0]);
+
+	/* Attach other dummy I2C clients. */
+	while (++num_i2c_clients < AB3550_NUM_BANKS) {
+		ab->i2c_client[num_i2c_clients] =
+			i2c_new_dummy(client->adapter,
+				(client->addr + num_i2c_clients));
+		if (!ab->i2c_client[num_i2c_clients]) {
+			err = -ENOMEM;
+			goto exit_no_dummy_client;
+		}
+		strlcpy(ab->i2c_client[num_i2c_clients]->name, id->name,
+			sizeof(ab->i2c_client[num_i2c_clients]->name));
+	}
+
+	err = ab3550_setup(ab);
+	if (err)
+		goto exit_no_setup;
+
+	INIT_WORK(&ab->mask_work, ab3550_mask_work);
+
+	for (i = 0; i < ab3550_plf_data->irq.count; i++) {
+		unsigned int irq;
+
+		irq = ab3550_plf_data->irq.base + i;
+		set_irq_chip_data(irq, ab);
+		set_irq_chip_and_handler(irq, &ab3550_irq_chip,
+			handle_simple_irq);
+		set_irq_nested_thread(irq, 1);
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, IRQF_VALID);
+#else
+		set_irq_noprobe(irq);
+#endif
+	}
+
+	err = request_threaded_irq(client->irq, NULL, ab3550_irq_handler,
+		IRQF_ONESHOT, "ab3550-core", ab);
+	/* This real unpredictable IRQ is of course sampled for entropy */
+	rand_initialize_irq(client->irq);
+
+	if (err)
+		goto exit_no_irq;
+
+	err = abx500_register_ops(&client->dev, &ab3550_ops);
+	if (err)
+		goto exit_no_ops;
+
+	/* Set up and register the platform devices. */
+	for (i = 0; i < AB3550_NUM_DEVICES; i++) {
+		ab3550_devs[i].platform_data = ab3550_plf_data->dev_data[i];
+		ab3550_devs[i].data_size = ab3550_plf_data->dev_data_sz[i];
+	}
+
+	err = mfd_add_devices(&client->dev, 0, ab3550_devs,
+		ARRAY_SIZE(ab3550_devs), NULL,
+		ab3550_plf_data->irq.base);
+
+	ab3550_setup_debugfs(ab);
+
+	return 0;
+
+exit_no_ops:
+exit_no_irq:
+exit_no_setup:
+exit_no_dummy_client:
+	/* Unregister the dummy i2c clients. */
+	while (--num_i2c_clients)
+		i2c_unregister_device(ab->i2c_client[num_i2c_clients]);
+exit_no_detect:
+	kfree(ab);
+	return err;
+}
+
+static int __exit ab3550_remove(struct i2c_client *client)
+{
+	struct ab3550 *ab = i2c_get_clientdata(client);
+	int num_i2c_clients = AB3550_NUM_BANKS;
+
+	mfd_remove_devices(&client->dev);
+	ab3550_remove_debugfs();
+
+	while (--num_i2c_clients)
+		i2c_unregister_device(ab->i2c_client[num_i2c_clients]);
+
+	/*
+	 * At this point, all subscribers should have unregistered
+	 * their notifiers so deactivate IRQ
+	 */
+	free_irq(client->irq, ab);
+	i2c_set_clientdata(client, NULL);
+	kfree(ab);
+	return 0;
+}
+
+static const struct i2c_device_id ab3550_id[] = {
+	{AB3550_NAME_STRING, 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ab3550_id);
+
+static struct i2c_driver ab3550_driver = {
+	.driver = {
+		.name	= AB3550_NAME_STRING,
+		.owner	= THIS_MODULE,
+	},
+	.id_table	= ab3550_id,
+	.probe		= ab3550_probe,
+	.remove		= __exit_p(ab3550_remove),
+};
+
+static int __init ab3550_i2c_init(void)
+{
+	return i2c_add_driver(&ab3550_driver);
+}
+
+static void __exit ab3550_i2c_exit(void)
+{
+	i2c_del_driver(&ab3550_driver);
+}
+
+subsys_initcall(ab3550_i2c_init);
+module_exit(ab3550_i2c_exit);
+
+MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
+MODULE_DESCRIPTION("AB3550 core driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/ab4500-core.c b/drivers/mfd/ab4500-core.c
deleted file mode 100644
index c275daa3ab1..00000000000
--- a/drivers/mfd/ab4500-core.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson
- *
- * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
- *
- * This program is free software; you can redistribute it
- * and/or modify it under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation.
- *
- * AB4500 is a companion power management chip used with U8500.
- * On this platform, this is interfaced with SSP0 controller
- * which is a ARM primecell pl022.
- *
- * At the moment the module just exports read/write features.
- * Interrupt management to be added - TODO.
- */
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/ab4500.h>
-
-/* just required if probe fails, we need to
- * unregister the device
- */
-static struct spi_driver ab4500_driver;
-
-/*
- * This funtion writes to any AB4500 registers using
- * SPI protocol &  before it writes it packs the data
- * in the below 24 bit frame format
- *
- *	 *|------------------------------------|
- *	 *| 23|22...18|17.......10|9|8|7......0|
- *	 *| r/w  bank       adr          data  |
- *	 * ------------------------------------
- *
- * This function shouldn't be called from interrupt
- * context
- */
-int ab4500_write(struct ab4500 *ab4500, unsigned char block,
-		unsigned long addr, unsigned char data)
-{
-	struct spi_transfer xfer;
-	struct spi_message	msg;
-	int err;
-	unsigned long spi_data =
-		block << 18 | addr << 10 | data;
-
-	mutex_lock(&ab4500->lock);
-	ab4500->tx_buf[0] = spi_data;
-	ab4500->rx_buf[0] = 0;
-
-	xfer.tx_buf	= ab4500->tx_buf;
-	xfer.rx_buf 	= NULL;
-	xfer.len	= sizeof(unsigned long);
-
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-
-	err = spi_sync(ab4500->spi, &msg);
-	mutex_unlock(&ab4500->lock);
-
-	return err;
-}
-EXPORT_SYMBOL(ab4500_write);
-
-int ab4500_read(struct ab4500 *ab4500, unsigned char block,
-		unsigned long addr)
-{
-	struct spi_transfer xfer;
-	struct spi_message	msg;
-	unsigned long spi_data =
-		1 << 23 | block << 18 | addr << 10;
-
-	mutex_lock(&ab4500->lock);
-	ab4500->tx_buf[0] = spi_data;
-	ab4500->rx_buf[0] = 0;
-
-	xfer.tx_buf	= ab4500->tx_buf;
-	xfer.rx_buf 	= ab4500->rx_buf;
-	xfer.len	= sizeof(unsigned long);
-
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-
-	spi_sync(ab4500->spi, &msg);
-	mutex_unlock(&ab4500->lock);
-
-	return  ab4500->rx_buf[0];
-}
-EXPORT_SYMBOL(ab4500_read);
-
-/* ref: ab3100 core */
-#define AB4500_DEVICE(devname, devid)				\
-static struct platform_device ab4500_##devname##_device = {	\
-	.name	= devid,					\
-	.id	= -1,						\
-}
-
-/* list of childern devices of ab4500 - all are
- * not populated here - TODO
- */
-AB4500_DEVICE(charger, "ab4500-charger");
-AB4500_DEVICE(audio, "ab4500-audio");
-AB4500_DEVICE(usb, "ab4500-usb");
-AB4500_DEVICE(tvout, "ab4500-tvout");
-AB4500_DEVICE(sim, "ab4500-sim");
-AB4500_DEVICE(gpadc, "ab4500-gpadc");
-AB4500_DEVICE(clkmgt, "ab4500-clkmgt");
-AB4500_DEVICE(misc, "ab4500-misc");
-
-static struct platform_device *ab4500_platform_devs[] = {
-	&ab4500_charger_device,
-	&ab4500_audio_device,
-	&ab4500_usb_device,
-	&ab4500_tvout_device,
-	&ab4500_sim_device,
-	&ab4500_gpadc_device,
-	&ab4500_clkmgt_device,
-	&ab4500_misc_device,
-};
-
-static int __init ab4500_probe(struct spi_device *spi)
-{
-	struct ab4500	*ab4500;
-	unsigned char revision;
-	int err = 0;
-	int i;
-
-	ab4500 = kzalloc(sizeof *ab4500, GFP_KERNEL);
-	if (!ab4500) {
-		dev_err(&spi->dev, "could not allocate AB4500\n");
-		err = -ENOMEM;
-		goto not_detect;
-	}
-
-	ab4500->spi = spi;
-	spi_set_drvdata(spi, ab4500);
-
-	mutex_init(&ab4500->lock);
-
-	/* read the revision register */
-	revision = ab4500_read(ab4500, AB4500_MISC, AB4500_REV_REG);
-
-	/* revision id 0x0 is for early drop, 0x10 is for cut1.0 */
-	if (revision == 0x0 || revision == 0x10)
-		dev_info(&spi->dev, "Detected chip: %s, revision = %x\n",
-			ab4500_driver.driver.name, revision);
-	else	{
-		dev_err(&spi->dev, "unknown chip: 0x%x\n", revision);
-		goto not_detect;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(ab4500_platform_devs); i++)	{
-		ab4500_platform_devs[i]->dev.parent =
-			&spi->dev;
-		platform_set_drvdata(ab4500_platform_devs[i], ab4500);
-	}
-
-	/* register the ab4500 platform devices */
-	platform_add_devices(ab4500_platform_devs,
-			ARRAY_SIZE(ab4500_platform_devs));
-
-	return err;
-
- not_detect:
-	spi_unregister_driver(&ab4500_driver);
-	kfree(ab4500);
-	return err;
-}
-
-static int __devexit ab4500_remove(struct spi_device *spi)
-{
-	struct ab4500 *ab4500 =
-		spi_get_drvdata(spi);
-
-	kfree(ab4500);
-
-	return 0;
-}
-
-static struct spi_driver ab4500_driver = {
-	.driver = {
-		.name = "ab4500",
-		.owner = THIS_MODULE,
-	},
-	.probe = ab4500_probe,
-	.remove = __devexit_p(ab4500_remove)
-};
-
-static int __devinit ab4500_init(void)
-{
-	return spi_register_driver(&ab4500_driver);
-}
-
-static void __exit ab4500_exit(void)
-{
-	spi_unregister_driver(&ab4500_driver);
-}
-
-subsys_initcall(ab4500_init);
-module_exit(ab4500_exit);
-
-MODULE_AUTHOR("Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com");
-MODULE_DESCRIPTION("AB4500 core driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
new file mode 100644
index 00000000000..f3d26fa9c34
--- /dev/null
+++ b/drivers/mfd/ab8500-core.c
@@ -0,0 +1,444 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/ab8500.h>
+
+/*
+ * Interrupt register offsets
+ * Bank : 0x0E
+ */
+#define AB8500_IT_SOURCE1_REG		0x0E00
+#define AB8500_IT_SOURCE2_REG		0x0E01
+#define AB8500_IT_SOURCE3_REG		0x0E02
+#define AB8500_IT_SOURCE4_REG		0x0E03
+#define AB8500_IT_SOURCE5_REG		0x0E04
+#define AB8500_IT_SOURCE6_REG		0x0E05
+#define AB8500_IT_SOURCE7_REG		0x0E06
+#define AB8500_IT_SOURCE8_REG		0x0E07
+#define AB8500_IT_SOURCE19_REG		0x0E12
+#define AB8500_IT_SOURCE20_REG		0x0E13
+#define AB8500_IT_SOURCE21_REG		0x0E14
+#define AB8500_IT_SOURCE22_REG		0x0E15
+#define AB8500_IT_SOURCE23_REG		0x0E16
+#define AB8500_IT_SOURCE24_REG		0x0E17
+
+/*
+ * latch registers
+ */
+#define AB8500_IT_LATCH1_REG		0x0E20
+#define AB8500_IT_LATCH2_REG		0x0E21
+#define AB8500_IT_LATCH3_REG		0x0E22
+#define AB8500_IT_LATCH4_REG		0x0E23
+#define AB8500_IT_LATCH5_REG		0x0E24
+#define AB8500_IT_LATCH6_REG		0x0E25
+#define AB8500_IT_LATCH7_REG		0x0E26
+#define AB8500_IT_LATCH8_REG		0x0E27
+#define AB8500_IT_LATCH9_REG		0x0E28
+#define AB8500_IT_LATCH10_REG		0x0E29
+#define AB8500_IT_LATCH19_REG		0x0E32
+#define AB8500_IT_LATCH20_REG		0x0E33
+#define AB8500_IT_LATCH21_REG		0x0E34
+#define AB8500_IT_LATCH22_REG		0x0E35
+#define AB8500_IT_LATCH23_REG		0x0E36
+#define AB8500_IT_LATCH24_REG		0x0E37
+
+/*
+ * mask registers
+ */
+
+#define AB8500_IT_MASK1_REG		0x0E40
+#define AB8500_IT_MASK2_REG		0x0E41
+#define AB8500_IT_MASK3_REG		0x0E42
+#define AB8500_IT_MASK4_REG		0x0E43
+#define AB8500_IT_MASK5_REG		0x0E44
+#define AB8500_IT_MASK6_REG		0x0E45
+#define AB8500_IT_MASK7_REG		0x0E46
+#define AB8500_IT_MASK8_REG		0x0E47
+#define AB8500_IT_MASK9_REG		0x0E48
+#define AB8500_IT_MASK10_REG		0x0E49
+#define AB8500_IT_MASK11_REG		0x0E4A
+#define AB8500_IT_MASK12_REG		0x0E4B
+#define AB8500_IT_MASK13_REG		0x0E4C
+#define AB8500_IT_MASK14_REG		0x0E4D
+#define AB8500_IT_MASK15_REG		0x0E4E
+#define AB8500_IT_MASK16_REG		0x0E4F
+#define AB8500_IT_MASK17_REG		0x0E50
+#define AB8500_IT_MASK18_REG		0x0E51
+#define AB8500_IT_MASK19_REG		0x0E52
+#define AB8500_IT_MASK20_REG		0x0E53
+#define AB8500_IT_MASK21_REG		0x0E54
+#define AB8500_IT_MASK22_REG		0x0E55
+#define AB8500_IT_MASK23_REG		0x0E56
+#define AB8500_IT_MASK24_REG		0x0E57
+
+#define AB8500_REV_REG			0x1080
+
+/*
+ * Map interrupt numbers to the LATCH and MASK register offsets, Interrupt
+ * numbers are indexed into this array with (num / 8).
+ *
+ * This is one off from the register names, i.e. AB8500_IT_MASK1_REG is at
+ * offset 0.
+ */
+static const int ab8500_irq_regoffset[AB8500_NUM_IRQ_REGS] = {
+	0, 1, 2, 3, 4, 6, 7, 8, 9, 18, 19, 20, 21,
+};
+
+static int __ab8500_write(struct ab8500 *ab8500, u16 addr, u8 data)
+{
+	int ret;
+
+	dev_vdbg(ab8500->dev, "wr: addr %#x <= %#x\n", addr, data);
+
+	ret = ab8500->write(ab8500, addr, data);
+	if (ret < 0)
+		dev_err(ab8500->dev, "failed to write reg %#x: %d\n",
+			addr, ret);
+
+	return ret;
+}
+
+/**
+ * ab8500_write() - write an AB8500 register
+ * @ab8500: device to write to
+ * @addr: address of the register
+ * @data: value to write
+ */
+int ab8500_write(struct ab8500 *ab8500, u16 addr, u8 data)
+{
+	int ret;
+
+	mutex_lock(&ab8500->lock);
+	ret = __ab8500_write(ab8500, addr, data);
+	mutex_unlock(&ab8500->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ab8500_write);
+
+static int __ab8500_read(struct ab8500 *ab8500, u16 addr)
+{
+	int ret;
+
+	ret = ab8500->read(ab8500, addr);
+	if (ret < 0)
+		dev_err(ab8500->dev, "failed to read reg %#x: %d\n",
+			addr, ret);
+
+	dev_vdbg(ab8500->dev, "rd: addr %#x => data %#x\n", addr, ret);
+
+	return ret;
+}
+
+/**
+ * ab8500_read() - read an AB8500 register
+ * @ab8500: device to read from
+ * @addr: address of the register
+ */
+int ab8500_read(struct ab8500 *ab8500, u16 addr)
+{
+	int ret;
+
+	mutex_lock(&ab8500->lock);
+	ret = __ab8500_read(ab8500, addr);
+	mutex_unlock(&ab8500->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ab8500_read);
+
+/**
+ * ab8500_set_bits() - set a bitfield in an AB8500 register
+ * @ab8500: device to read from
+ * @addr: address of the register
+ * @mask: mask of the bitfield to modify
+ * @data: value to set to the bitfield
+ */
+int ab8500_set_bits(struct ab8500 *ab8500, u16 addr, u8 mask, u8 data)
+{
+	int ret;
+
+	mutex_lock(&ab8500->lock);
+
+	ret = __ab8500_read(ab8500, addr);
+	if (ret < 0)
+		goto out;
+
+	ret &= ~mask;
+	ret |= data;
+
+	ret = __ab8500_write(ab8500, addr, ret);
+
+out:
+	mutex_unlock(&ab8500->lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ab8500_set_bits);
+
+static void ab8500_irq_lock(unsigned int irq)
+{
+	struct ab8500 *ab8500 = get_irq_chip_data(irq);
+
+	mutex_lock(&ab8500->irq_lock);
+}
+
+static void ab8500_irq_sync_unlock(unsigned int irq)
+{
+	struct ab8500 *ab8500 = get_irq_chip_data(irq);
+	int i;
+
+	for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) {
+		u8 old = ab8500->oldmask[i];
+		u8 new = ab8500->mask[i];
+		int reg;
+
+		if (new == old)
+			continue;
+
+		ab8500->oldmask[i] = new;
+
+		reg = AB8500_IT_MASK1_REG + ab8500_irq_regoffset[i];
+		ab8500_write(ab8500, reg, new);
+	}
+
+	mutex_unlock(&ab8500->irq_lock);
+}
+
+static void ab8500_irq_mask(unsigned int irq)
+{
+	struct ab8500 *ab8500 = get_irq_chip_data(irq);
+	int offset = irq - ab8500->irq_base;
+	int index = offset / 8;
+	int mask = 1 << (offset % 8);
+
+	ab8500->mask[index] |= mask;
+}
+
+static void ab8500_irq_unmask(unsigned int irq)
+{
+	struct ab8500 *ab8500 = get_irq_chip_data(irq);
+	int offset = irq - ab8500->irq_base;
+	int index = offset / 8;
+	int mask = 1 << (offset % 8);
+
+	ab8500->mask[index] &= ~mask;
+}
+
+static struct irq_chip ab8500_irq_chip = {
+	.name			= "ab8500",
+	.bus_lock		= ab8500_irq_lock,
+	.bus_sync_unlock	= ab8500_irq_sync_unlock,
+	.mask			= ab8500_irq_mask,
+	.unmask			= ab8500_irq_unmask,
+};
+
+static irqreturn_t ab8500_irq(int irq, void *dev)
+{
+	struct ab8500 *ab8500 = dev;
+	int i;
+
+	dev_vdbg(ab8500->dev, "interrupt\n");
+
+	for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) {
+		int regoffset = ab8500_irq_regoffset[i];
+		int status;
+
+		status = ab8500_read(ab8500, AB8500_IT_LATCH1_REG + regoffset);
+		if (status <= 0)
+			continue;
+
+		do {
+			int bit = __ffs(status);
+			int line = i * 8 + bit;
+
+			handle_nested_irq(ab8500->irq_base + line);
+			status &= ~(1 << bit);
+		} while (status);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int ab8500_irq_init(struct ab8500 *ab8500)
+{
+	int base = ab8500->irq_base;
+	int irq;
+
+	for (irq = base; irq < base + AB8500_NR_IRQS; irq++) {
+		set_irq_chip_data(irq, ab8500);
+		set_irq_chip_and_handler(irq, &ab8500_irq_chip,
+					 handle_simple_irq);
+		set_irq_nested_thread(irq, 1);
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, IRQF_VALID);
+#else
+		set_irq_noprobe(irq);
+#endif
+	}
+
+	return 0;
+}
+
+static void ab8500_irq_remove(struct ab8500 *ab8500)
+{
+	int base = ab8500->irq_base;
+	int irq;
+
+	for (irq = base; irq < base + AB8500_NR_IRQS; irq++) {
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, 0);
+#endif
+		set_irq_chip_and_handler(irq, NULL, NULL);
+		set_irq_chip_data(irq, NULL);
+	}
+}
+
+static struct resource ab8500_gpadc_resources[] = {
+	{
+		.name	= "HW_CONV_END",
+		.start	= AB8500_INT_GP_HW_ADC_CONV_END,
+		.end	= AB8500_INT_GP_HW_ADC_CONV_END,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "SW_CONV_END",
+		.start	= AB8500_INT_GP_SW_ADC_CONV_END,
+		.end	= AB8500_INT_GP_SW_ADC_CONV_END,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource ab8500_rtc_resources[] = {
+	{
+		.name	= "60S",
+		.start	= AB8500_INT_RTC_60S,
+		.end	= AB8500_INT_RTC_60S,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "ALARM",
+		.start	= AB8500_INT_RTC_ALARM,
+		.end	= AB8500_INT_RTC_ALARM,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mfd_cell ab8500_devs[] = {
+	{
+		.name = "ab8500-gpadc",
+		.num_resources = ARRAY_SIZE(ab8500_gpadc_resources),
+		.resources = ab8500_gpadc_resources,
+	},
+	{
+		.name = "ab8500-rtc",
+		.num_resources = ARRAY_SIZE(ab8500_rtc_resources),
+		.resources = ab8500_rtc_resources,
+	},
+	{ .name = "ab8500-charger", },
+	{ .name = "ab8500-audio", },
+	{ .name = "ab8500-usb", },
+	{ .name = "ab8500-pwm", },
+};
+
+int __devinit ab8500_init(struct ab8500 *ab8500)
+{
+	struct ab8500_platform_data *plat = dev_get_platdata(ab8500->dev);
+	int ret;
+	int i;
+
+	if (plat)
+		ab8500->irq_base = plat->irq_base;
+
+	mutex_init(&ab8500->lock);
+	mutex_init(&ab8500->irq_lock);
+
+	ret = ab8500_read(ab8500, AB8500_REV_REG);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * 0x0 - Early Drop
+	 * 0x10 - Cut 1.0
+	 * 0x11 - Cut 1.1
+	 */
+	if (ret == 0x0 || ret == 0x10 || ret == 0x11) {
+		ab8500->revision = ret;
+		dev_info(ab8500->dev, "detected chip, revision: %#x\n", ret);
+	} else {
+		dev_err(ab8500->dev, "unknown chip, revision: %#x\n", ret);
+		return -EINVAL;
+	}
+
+	if (plat && plat->init)
+		plat->init(ab8500);
+
+	/* Clear and mask all interrupts */
+	for (i = 0; i < 10; i++) {
+		ab8500_read(ab8500, AB8500_IT_LATCH1_REG + i);
+		ab8500_write(ab8500, AB8500_IT_MASK1_REG + i, 0xff);
+	}
+
+	for (i = 18; i < 24; i++) {
+		ab8500_read(ab8500, AB8500_IT_LATCH1_REG + i);
+		ab8500_write(ab8500, AB8500_IT_MASK1_REG + i, 0xff);
+	}
+
+	for (i = 0; i < AB8500_NUM_IRQ_REGS; i++)
+		ab8500->mask[i] = ab8500->oldmask[i] = 0xff;
+
+	if (ab8500->irq_base) {
+		ret = ab8500_irq_init(ab8500);
+		if (ret)
+			return ret;
+
+		ret = request_threaded_irq(ab8500->irq, NULL, ab8500_irq,
+					   IRQF_ONESHOT, "ab8500", ab8500);
+		if (ret)
+			goto out_removeirq;
+	}
+
+	ret = mfd_add_devices(ab8500->dev, -1, ab8500_devs,
+			      ARRAY_SIZE(ab8500_devs), NULL,
+			      ab8500->irq_base);
+	if (ret)
+		goto out_freeirq;
+
+	return ret;
+
+out_freeirq:
+	if (ab8500->irq_base) {
+		free_irq(ab8500->irq, ab8500);
+out_removeirq:
+		ab8500_irq_remove(ab8500);
+	}
+	return ret;
+}
+
+int __devexit ab8500_exit(struct ab8500 *ab8500)
+{
+	mfd_remove_devices(ab8500->dev);
+	if (ab8500->irq_base) {
+		free_irq(ab8500->irq, ab8500);
+		ab8500_irq_remove(ab8500);
+	}
+
+	return 0;
+}
+
+MODULE_AUTHOR("Srinidhi Kasagar, Rabin Vincent");
+MODULE_DESCRIPTION("AB8500 MFD core");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/ab8500-spi.c b/drivers/mfd/ab8500-spi.c
new file mode 100644
index 00000000000..b81d4f768ef
--- /dev/null
+++ b/drivers/mfd/ab8500-spi.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mfd/ab8500.h>
+
+/*
+ * This funtion writes to any AB8500 registers using
+ * SPI protocol &  before it writes it packs the data
+ * in the below 24 bit frame format
+ *
+ *	 *|------------------------------------|
+ *	 *| 23|22...18|17.......10|9|8|7......0|
+ *	 *| r/w  bank       adr          data  |
+ *	 * ------------------------------------
+ *
+ * This function shouldn't be called from interrupt
+ * context
+ */
+static int ab8500_spi_write(struct ab8500 *ab8500, u16 addr, u8 data)
+{
+	struct spi_device *spi = container_of(ab8500->dev, struct spi_device,
+					      dev);
+	unsigned long spi_data = addr << 10 | data;
+	struct spi_transfer xfer;
+	struct spi_message msg;
+
+	ab8500->tx_buf[0] = spi_data;
+	ab8500->rx_buf[0] = 0;
+
+	xfer.tx_buf	= ab8500->tx_buf;
+	xfer.rx_buf	= NULL;
+	xfer.len	= sizeof(unsigned long);
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	return spi_sync(spi, &msg);
+}
+
+static int ab8500_spi_read(struct ab8500 *ab8500, u16 addr)
+{
+	struct spi_device *spi = container_of(ab8500->dev, struct spi_device,
+					      dev);
+	unsigned long spi_data = 1 << 23 | addr << 10;
+	struct spi_transfer xfer;
+	struct spi_message msg;
+	int ret;
+
+	ab8500->tx_buf[0] = spi_data;
+	ab8500->rx_buf[0] = 0;
+
+	xfer.tx_buf	= ab8500->tx_buf;
+	xfer.rx_buf	= ab8500->rx_buf;
+	xfer.len	= sizeof(unsigned long);
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	ret = spi_sync(spi, &msg);
+	if (!ret)
+		ret = ab8500->rx_buf[0];
+
+	return ret;
+}
+
+static int __devinit ab8500_spi_probe(struct spi_device *spi)
+{
+	struct ab8500 *ab8500;
+	int ret;
+
+	ab8500 = kzalloc(sizeof *ab8500, GFP_KERNEL);
+	if (!ab8500)
+		return -ENOMEM;
+
+	ab8500->dev = &spi->dev;
+	ab8500->irq = spi->irq;
+
+	ab8500->read = ab8500_spi_read;
+	ab8500->write = ab8500_spi_write;
+
+	spi_set_drvdata(spi, ab8500);
+
+	ret = ab8500_init(ab8500);
+	if (ret)
+		kfree(ab8500);
+
+	return ret;
+}
+
+static int __devexit ab8500_spi_remove(struct spi_device *spi)
+{
+	struct ab8500 *ab8500 = spi_get_drvdata(spi);
+
+	ab8500_exit(ab8500);
+	kfree(ab8500);
+
+	return 0;
+}
+
+static struct spi_driver ab8500_spi_driver = {
+	.driver = {
+		.name = "ab8500",
+		.owner = THIS_MODULE,
+	},
+	.probe	= ab8500_spi_probe,
+	.remove	= __devexit_p(ab8500_spi_remove)
+};
+
+static int __init ab8500_spi_init(void)
+{
+	return spi_register_driver(&ab8500_spi_driver);
+}
+subsys_initcall(ab8500_spi_init);
+
+static void __exit ab8500_spi_exit(void)
+{
+	spi_unregister_driver(&ab8500_spi_driver);
+}
+module_exit(ab8500_spi_exit);
+
+MODULE_AUTHOR("Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com");
+MODULE_DESCRIPTION("AB8500 SPI");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/abx500-core.c b/drivers/mfd/abx500-core.c
new file mode 100644
index 00000000000..3b3b97ec32a
--- /dev/null
+++ b/drivers/mfd/abx500-core.c
@@ -0,0 +1,157 @@
+/*
+ * Copyright (C) 2007-2010 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Register access functions for the ABX500 Mixed Signal IC family.
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com>
+ */
+
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/mfd/abx500.h>
+
+static LIST_HEAD(abx500_list);
+
+struct abx500_device_entry {
+	struct list_head list;
+	struct abx500_ops ops;
+	struct device *dev;
+};
+
+static void lookup_ops(struct device *dev, struct abx500_ops **ops)
+{
+	struct abx500_device_entry *dev_entry;
+
+	*ops = NULL;
+	list_for_each_entry(dev_entry, &abx500_list, list) {
+		if (dev_entry->dev == dev) {
+			*ops = &dev_entry->ops;
+			return;
+		}
+	}
+}
+
+int abx500_register_ops(struct device *dev, struct abx500_ops *ops)
+{
+	struct abx500_device_entry *dev_entry;
+
+	dev_entry = kzalloc(sizeof(struct abx500_device_entry), GFP_KERNEL);
+	if (IS_ERR(dev_entry)) {
+		dev_err(dev, "register_ops kzalloc failed");
+		return -ENOMEM;
+	}
+	dev_entry->dev = dev;
+	memcpy(&dev_entry->ops, ops, sizeof(struct abx500_ops));
+
+	list_add_tail(&dev_entry->list, &abx500_list);
+	return 0;
+}
+EXPORT_SYMBOL(abx500_register_ops);
+
+void abx500_remove_ops(struct device *dev)
+{
+	struct abx500_device_entry *dev_entry, *tmp;
+
+	list_for_each_entry_safe(dev_entry, tmp, &abx500_list, list)
+	{
+		if (dev_entry->dev == dev) {
+			list_del(&dev_entry->list);
+			kfree(dev_entry);
+		}
+	}
+}
+EXPORT_SYMBOL(abx500_remove_ops);
+
+int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg,
+	u8 value)
+{
+	struct abx500_ops *ops;
+
+	lookup_ops(dev->parent, &ops);
+	if ((ops != NULL) && (ops->set_register != NULL))
+		return ops->set_register(dev, bank, reg, value);
+	else
+		return -ENOTSUPP;
+}
+EXPORT_SYMBOL(abx500_set_register_interruptible);
+
+int abx500_get_register_interruptible(struct device *dev, u8 bank, u8 reg,
+	u8 *value)
+{
+	struct abx500_ops *ops;
+
+	lookup_ops(dev->parent, &ops);
+	if ((ops != NULL) && (ops->get_register != NULL))
+		return ops->get_register(dev, bank, reg, value);
+	else
+		return -ENOTSUPP;
+}
+EXPORT_SYMBOL(abx500_get_register_interruptible);
+
+int abx500_get_register_page_interruptible(struct device *dev, u8 bank,
+	u8 first_reg, u8 *regvals, u8 numregs)
+{
+	struct abx500_ops *ops;
+
+	lookup_ops(dev->parent, &ops);
+	if ((ops != NULL) && (ops->get_register_page != NULL))
+		return ops->get_register_page(dev, bank,
+			first_reg, regvals, numregs);
+	else
+		return -ENOTSUPP;
+}
+EXPORT_SYMBOL(abx500_get_register_page_interruptible);
+
+int abx500_mask_and_set_register_interruptible(struct device *dev, u8 bank,
+	u8 reg, u8 bitmask, u8 bitvalues)
+{
+	struct abx500_ops *ops;
+
+	lookup_ops(dev->parent, &ops);
+	if ((ops != NULL) && (ops->mask_and_set_register != NULL))
+		return ops->mask_and_set_register(dev, bank,
+			reg, bitmask, bitvalues);
+	else
+		return -ENOTSUPP;
+}
+EXPORT_SYMBOL(abx500_mask_and_set_register_interruptible);
+
+int abx500_get_chip_id(struct device *dev)
+{
+	struct abx500_ops *ops;
+
+	lookup_ops(dev->parent, &ops);
+	if ((ops != NULL) && (ops->get_chip_id != NULL))
+		return ops->get_chip_id(dev);
+	else
+		return -ENOTSUPP;
+}
+EXPORT_SYMBOL(abx500_get_chip_id);
+
+int abx500_event_registers_startup_state_get(struct device *dev, u8 *event)
+{
+	struct abx500_ops *ops;
+
+	lookup_ops(dev->parent, &ops);
+	if ((ops != NULL) && (ops->event_registers_startup_state_get != NULL))
+		return ops->event_registers_startup_state_get(dev, event);
+	else
+		return -ENOTSUPP;
+}
+EXPORT_SYMBOL(abx500_event_registers_startup_state_get);
+
+int abx500_startup_irq_enabled(struct device *dev, unsigned int irq)
+{
+	struct abx500_ops *ops;
+
+	lookup_ops(dev->parent, &ops);
+	if ((ops != NULL) && (ops->startup_irq_enabled != NULL))
+		return ops->startup_irq_enabled(dev, irq);
+	else
+		return -ENOTSUPP;
+}
+EXPORT_SYMBOL(abx500_startup_irq_enabled);
+
+MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
+MODULE_DESCRIPTION("ABX500 core driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c
index 67181b147ab..3ad915d0589 100644
--- a/drivers/mfd/da903x.c
+++ b/drivers/mfd/da903x.c
@@ -544,6 +544,7 @@ static int __devexit da903x_remove(struct i2c_client *client)
 	struct da903x_chip *chip = i2c_get_clientdata(client);
 
 	da903x_remove_subdevs(chip);
+	i2c_set_clientdata(client, NULL);
 	kfree(chip);
 	return 0;
 }
diff --git a/drivers/mfd/janz-cmodio.c b/drivers/mfd/janz-cmodio.c
new file mode 100644
index 00000000000..9ed630799ac
--- /dev/null
+++ b/drivers/mfd/janz-cmodio.c
@@ -0,0 +1,304 @@
+/*
+ * Janz CMOD-IO MODULbus Carrier Board PCI Driver
+ *
+ * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
+ *
+ * Lots of inspiration and code was copied from drivers/mfd/sm501.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+
+#include <linux/mfd/janz.h>
+
+#define DRV_NAME "janz-cmodio"
+
+/* Size of each MODULbus module in PCI BAR4 */
+#define CMODIO_MODULBUS_SIZE	0x200
+
+/* Maximum number of MODULbus modules on a CMOD-IO carrier board */
+#define CMODIO_MAX_MODULES	4
+
+/* Module Parameters */
+static unsigned int num_modules = CMODIO_MAX_MODULES;
+static unsigned char *modules[CMODIO_MAX_MODULES] = {
+	"empty", "empty", "empty", "empty",
+};
+
+module_param_array(modules, charp, &num_modules, S_IRUGO);
+MODULE_PARM_DESC(modules, "MODULbus modules attached to the carrier board");
+
+/* Unique Device Id */
+static unsigned int cmodio_id;
+
+struct cmodio_device {
+	/* Parent PCI device */
+	struct pci_dev *pdev;
+
+	/* PLX control registers */
+	struct janz_cmodio_onboard_regs __iomem *ctrl;
+
+	/* hex switch position */
+	u8 hex;
+
+	/* mfd-core API */
+	struct mfd_cell cells[CMODIO_MAX_MODULES];
+	struct resource resources[3 * CMODIO_MAX_MODULES];
+	struct janz_platform_data pdata[CMODIO_MAX_MODULES];
+};
+
+/*
+ * Subdevices using the mfd-core API
+ */
+
+static int __devinit cmodio_setup_subdevice(struct cmodio_device *priv,
+					    char *name, unsigned int devno,
+					    unsigned int modno)
+{
+	struct janz_platform_data *pdata;
+	struct mfd_cell *cell;
+	struct resource *res;
+	struct pci_dev *pci;
+
+	pci = priv->pdev;
+	cell = &priv->cells[devno];
+	res = &priv->resources[devno * 3];
+	pdata = &priv->pdata[devno];
+
+	cell->name = name;
+	cell->resources = res;
+	cell->num_resources = 3;
+
+	/* Setup the subdevice ID -- must be unique */
+	cell->id = cmodio_id++;
+
+	/* Add platform data */
+	pdata->modno = modno;
+	cell->platform_data = pdata;
+	cell->data_size = sizeof(*pdata);
+
+	/* MODULbus registers -- PCI BAR3 is big-endian MODULbus access */
+	res->flags = IORESOURCE_MEM;
+	res->parent = &pci->resource[3];
+	res->start = pci->resource[3].start + (CMODIO_MODULBUS_SIZE * modno);
+	res->end = res->start + CMODIO_MODULBUS_SIZE - 1;
+	res++;
+
+	/* PLX Control Registers -- PCI BAR4 is interrupt and other registers */
+	res->flags = IORESOURCE_MEM;
+	res->parent = &pci->resource[4];
+	res->start = pci->resource[4].start;
+	res->end = pci->resource[4].end;
+	res++;
+
+	/*
+	 * IRQ
+	 *
+	 * The start and end fields are used as an offset to the irq_base
+	 * parameter passed into the mfd_add_devices() function call. All
+	 * devices share the same IRQ.
+	 */
+	res->flags = IORESOURCE_IRQ;
+	res->parent = NULL;
+	res->start = 0;
+	res->end = 0;
+	res++;
+
+	return 0;
+}
+
+/* Probe each submodule using kernel parameters */
+static int __devinit cmodio_probe_submodules(struct cmodio_device *priv)
+{
+	struct pci_dev *pdev = priv->pdev;
+	unsigned int num_probed = 0;
+	char *name;
+	int i;
+
+	for (i = 0; i < num_modules; i++) {
+		name = modules[i];
+		if (!strcmp(name, "") || !strcmp(name, "empty"))
+			continue;
+
+		dev_dbg(&priv->pdev->dev, "MODULbus %d: name %s\n", i, name);
+		cmodio_setup_subdevice(priv, name, num_probed, i);
+		num_probed++;
+	}
+
+	/* print an error message if no modules were probed */
+	if (num_probed == 0) {
+		dev_err(&priv->pdev->dev, "no MODULbus modules specified, "
+					  "please set the ``modules'' kernel "
+					  "parameter according to your "
+					  "hardware configuration\n");
+		return -ENODEV;
+	}
+
+	return mfd_add_devices(&pdev->dev, 0, priv->cells,
+			       num_probed, NULL, pdev->irq);
+}
+
+/*
+ * SYSFS Attributes
+ */
+
+static ssize_t mbus_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct cmodio_device *priv = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%x\n", priv->hex);
+}
+
+static DEVICE_ATTR(modulbus_number, S_IRUGO, mbus_show, NULL);
+
+static struct attribute *cmodio_sysfs_attrs[] = {
+	&dev_attr_modulbus_number.attr,
+	NULL,
+};
+
+static const struct attribute_group cmodio_sysfs_attr_group = {
+	.attrs = cmodio_sysfs_attrs,
+};
+
+/*
+ * PCI Driver
+ */
+
+static int __devinit cmodio_pci_probe(struct pci_dev *dev,
+				      const struct pci_device_id *id)
+{
+	struct cmodio_device *priv;
+	int ret;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(&dev->dev, "unable to allocate private data\n");
+		ret = -ENOMEM;
+		goto out_return;
+	}
+
+	pci_set_drvdata(dev, priv);
+	priv->pdev = dev;
+
+	/* Hardware Initialization */
+	ret = pci_enable_device(dev);
+	if (ret) {
+		dev_err(&dev->dev, "unable to enable device\n");
+		goto out_free_priv;
+	}
+
+	pci_set_master(dev);
+	ret = pci_request_regions(dev, DRV_NAME);
+	if (ret) {
+		dev_err(&dev->dev, "unable to request regions\n");
+		goto out_pci_disable_device;
+	}
+
+	/* Onboard configuration registers */
+	priv->ctrl = pci_ioremap_bar(dev, 4);
+	if (!priv->ctrl) {
+		dev_err(&dev->dev, "unable to remap onboard regs\n");
+		ret = -ENOMEM;
+		goto out_pci_release_regions;
+	}
+
+	/* Read the hex switch on the carrier board */
+	priv->hex = ioread8(&priv->ctrl->int_enable);
+
+	/* Add the MODULbus number (hex switch value) to the device's sysfs */
+	ret = sysfs_create_group(&dev->dev.kobj, &cmodio_sysfs_attr_group);
+	if (ret) {
+		dev_err(&dev->dev, "unable to create sysfs attributes\n");
+		goto out_unmap_ctrl;
+	}
+
+	/*
+	 * Disable all interrupt lines, each submodule will enable its
+	 * own interrupt line if needed
+	 */
+	iowrite8(0xf, &priv->ctrl->int_disable);
+
+	/* Register drivers for all submodules */
+	ret = cmodio_probe_submodules(priv);
+	if (ret) {
+		dev_err(&dev->dev, "unable to probe submodules\n");
+		goto out_sysfs_remove_group;
+	}
+
+	return 0;
+
+out_sysfs_remove_group:
+	sysfs_remove_group(&dev->dev.kobj, &cmodio_sysfs_attr_group);
+out_unmap_ctrl:
+	iounmap(priv->ctrl);
+out_pci_release_regions:
+	pci_release_regions(dev);
+out_pci_disable_device:
+	pci_disable_device(dev);
+out_free_priv:
+	kfree(priv);
+out_return:
+	return ret;
+}
+
+static void __devexit cmodio_pci_remove(struct pci_dev *dev)
+{
+	struct cmodio_device *priv = pci_get_drvdata(dev);
+
+	mfd_remove_devices(&dev->dev);
+	sysfs_remove_group(&dev->dev.kobj, &cmodio_sysfs_attr_group);
+	iounmap(priv->ctrl);
+	pci_release_regions(dev);
+	pci_disable_device(dev);
+	kfree(priv);
+}
+
+#define PCI_VENDOR_ID_JANZ		0x13c3
+
+/* The list of devices that this module will support */
+static DEFINE_PCI_DEVICE_TABLE(cmodio_pci_ids) = {
+	{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_JANZ, 0x0101 },
+	{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_JANZ, 0x0100 },
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, cmodio_pci_ids);
+
+static struct pci_driver cmodio_pci_driver = {
+	.name     = DRV_NAME,
+	.id_table = cmodio_pci_ids,
+	.probe    = cmodio_pci_probe,
+	.remove   = __devexit_p(cmodio_pci_remove),
+};
+
+/*
+ * Module Init / Exit
+ */
+
+static int __init cmodio_init(void)
+{
+	return pci_register_driver(&cmodio_pci_driver);
+}
+
+static void __exit cmodio_exit(void)
+{
+	pci_unregister_driver(&cmodio_pci_driver);
+}
+
+MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
+MODULE_DESCRIPTION("Janz CMOD-IO PCI MODULbus Carrier Board Driver");
+MODULE_LICENSE("GPL");
+
+module_init(cmodio_init);
+module_exit(cmodio_exit);
diff --git a/drivers/mfd/max8925-core.c b/drivers/mfd/max8925-core.c
index 85d63c04749..f621bcea3d0 100644
--- a/drivers/mfd/max8925-core.c
+++ b/drivers/mfd/max8925-core.c
@@ -508,7 +508,7 @@ static int max8925_irq_init(struct max8925_chip *chip, int irq,
 	max8925_reg_read(chip->i2c, MAX8925_ON_OFF_IRQ2);
 	max8925_reg_read(chip->rtc, MAX8925_RTC_IRQ);
 	max8925_reg_read(chip->adc, MAX8925_TSC_IRQ);
-	/* mask all interrupts */
+	/* mask all interrupts except for TSC */
 	max8925_reg_write(chip->rtc, MAX8925_ALARM0_CNTL, 0);
 	max8925_reg_write(chip->rtc, MAX8925_ALARM1_CNTL, 0);
 	max8925_reg_write(chip->i2c, MAX8925_CHG_IRQ1_MASK, 0xff);
@@ -516,7 +516,6 @@ static int max8925_irq_init(struct max8925_chip *chip, int irq,
 	max8925_reg_write(chip->i2c, MAX8925_ON_OFF_IRQ1_MASK, 0xff);
 	max8925_reg_write(chip->i2c, MAX8925_ON_OFF_IRQ2_MASK, 0xff);
 	max8925_reg_write(chip->rtc, MAX8925_RTC_IRQ_MASK, 0xff);
-	max8925_reg_write(chip->adc, MAX8925_TSC_IRQ_MASK, 0xff);
 
 	mutex_init(&chip->irq_lock);
 	chip->core_irq = irq;
@@ -547,7 +546,11 @@ static int max8925_irq_init(struct max8925_chip *chip, int irq,
 		dev_err(chip->dev, "Failed to request core IRQ: %d\n", ret);
 		chip->core_irq = 0;
 	}
+
 tsc_irq:
+	/* mask TSC interrupt */
+	max8925_reg_write(chip->adc, MAX8925_TSC_IRQ_MASK, 0x0f);
+
 	if (!pdata->tsc_irq) {
 		dev_warn(chip->dev, "No interrupt support on TSC IRQ\n");
 		return 0;
diff --git a/drivers/mfd/max8925-i2c.c b/drivers/mfd/max8925-i2c.c
index d9fd8785da4..e73f3f5252a 100644
--- a/drivers/mfd/max8925-i2c.c
+++ b/drivers/mfd/max8925-i2c.c
@@ -173,8 +173,6 @@ static int __devexit max8925_remove(struct i2c_client *client)
 	max8925_device_exit(chip);
 	i2c_unregister_device(chip->adc);
 	i2c_unregister_device(chip->rtc);
-	i2c_set_clientdata(chip->adc, NULL);
-	i2c_set_clientdata(chip->rtc, NULL);
 	i2c_set_clientdata(chip->i2c, NULL);
 	kfree(chip);
 	return 0;
diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
index a94b131a18e..721948be12c 100644
--- a/drivers/mfd/menelaus.c
+++ b/drivers/mfd/menelaus.c
@@ -1228,6 +1228,7 @@ fail2:
 	free_irq(client->irq, menelaus);
 	flush_scheduled_work();
 fail1:
+	i2c_set_clientdata(client, NULL);
 	kfree(menelaus);
 	return err;
 }
@@ -1237,8 +1238,8 @@ static int __exit menelaus_remove(struct i2c_client *client)
 	struct menelaus_chip	*menelaus = i2c_get_clientdata(client);
 
 	free_irq(client->irq, menelaus);
-	kfree(menelaus);
 	i2c_set_clientdata(client, NULL);
+	kfree(menelaus);
 	the_menelaus = NULL;
 	return 0;
 }
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index 8ffbb7a85a7..7dd76bceaae 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -48,7 +48,7 @@ static int mfd_add_device(struct device *parent, int id,
 		res[r].flags = cell->resources[r].flags;
 
 		/* Find out base to use */
-		if (cell->resources[r].flags & IORESOURCE_MEM) {
+		if ((cell->resources[r].flags & IORESOURCE_MEM) && mem_base) {
 			res[r].parent = mem_base;
 			res[r].start = mem_base->start +
 				cell->resources[r].start;
diff --git a/drivers/mfd/pcf50633-adc.c b/drivers/mfd/pcf50633-adc.c
index fe8f922f665..aed0d2a9b03 100644
--- a/drivers/mfd/pcf50633-adc.c
+++ b/drivers/mfd/pcf50633-adc.c
@@ -30,13 +30,13 @@
 struct pcf50633_adc_request {
 	int mux;
 	int avg;
-	int result;
 	void (*callback)(struct pcf50633 *, void *, int);
 	void *callback_param;
+};
 
-	/* Used in case of sync requests */
+struct pcf50633_adc_sync_request {
+	int result;
 	struct completion completion;
-
 };
 
 #define PCF50633_MAX_ADC_FIFO_DEPTH 8
@@ -109,10 +109,10 @@ adc_enqueue_request(struct pcf50633 *pcf, struct pcf50633_adc_request *req)
 	return 0;
 }
 
-static void
-pcf50633_adc_sync_read_callback(struct pcf50633 *pcf, void *param, int result)
+static void pcf50633_adc_sync_read_callback(struct pcf50633 *pcf, void *param,
+	int result)
 {
-	struct pcf50633_adc_request *req = param;
+	struct pcf50633_adc_sync_request *req = param;
 
 	req->result = result;
 	complete(&req->completion);
@@ -120,28 +120,19 @@ pcf50633_adc_sync_read_callback(struct pcf50633 *pcf, void *param, int result)
 
 int pcf50633_adc_sync_read(struct pcf50633 *pcf, int mux, int avg)
 {
-	struct pcf50633_adc_request *req;
-	int err;
+	struct pcf50633_adc_sync_request req;
+	int ret;
 
-	/* req is freed when the result is ready, in interrupt handler */
-	req = kzalloc(sizeof(*req), GFP_KERNEL);
-	if (!req)
-		return -ENOMEM;
-
-	req->mux = mux;
-	req->avg = avg;
-	req->callback =  pcf50633_adc_sync_read_callback;
-	req->callback_param = req;
+	init_completion(&req.completion);
 
-	init_completion(&req->completion);
-	err = adc_enqueue_request(pcf, req);
-	if (err)
-		return err;
+	ret = pcf50633_adc_async_read(pcf, mux, avg,
+		pcf50633_adc_sync_read_callback, &req);
+	if (ret)
+		return ret;
 
-	wait_for_completion(&req->completion);
+	wait_for_completion(&req.completion);
 
-	/* FIXME by this time req might be already freed */
-	return req->result;
+	return req.result;
 }
 EXPORT_SYMBOL_GPL(pcf50633_adc_sync_read);
 
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index dc95ddb708f..704736e6e9b 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -21,16 +21,16 @@
 #include <linux/workqueue.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <linux/irq.h>
 #include <linux/slab.h>
 
 #include <linux/mfd/pcf50633/core.h>
 
-/* Two MBCS registers used during cold start */
-#define PCF50633_REG_MBCS1		0x4b
-#define PCF50633_REG_MBCS2		0x4c
-#define PCF50633_MBCS1_USBPRES 		0x01
-#define PCF50633_MBCS1_ADAPTPRES	0x01
+int pcf50633_irq_init(struct pcf50633 *pcf, int irq);
+void pcf50633_irq_free(struct pcf50633 *pcf);
+#ifdef CONFIG_PM
+int pcf50633_irq_suspend(struct pcf50633 *pcf);
+int pcf50633_irq_resume(struct pcf50633 *pcf);
+#endif
 
 static int __pcf50633_read(struct pcf50633 *pcf, u8 reg, int num, u8 *data)
 {
@@ -215,244 +215,6 @@ static struct attribute_group pcf_attr_group = {
 	.attrs	= pcf_sysfs_entries,
 };
 
-int pcf50633_register_irq(struct pcf50633 *pcf, int irq,
-			void (*handler) (int, void *), void *data)
-{
-	if (irq < 0 || irq > PCF50633_NUM_IRQ || !handler)
-		return -EINVAL;
-
-	if (WARN_ON(pcf->irq_handler[irq].handler))
-		return -EBUSY;
-
-	mutex_lock(&pcf->lock);
-	pcf->irq_handler[irq].handler = handler;
-	pcf->irq_handler[irq].data = data;
-	mutex_unlock(&pcf->lock);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(pcf50633_register_irq);
-
-int pcf50633_free_irq(struct pcf50633 *pcf, int irq)
-{
-	if (irq < 0 || irq > PCF50633_NUM_IRQ)
-		return -EINVAL;
-
-	mutex_lock(&pcf->lock);
-	pcf->irq_handler[irq].handler = NULL;
-	mutex_unlock(&pcf->lock);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(pcf50633_free_irq);
-
-static int __pcf50633_irq_mask_set(struct pcf50633 *pcf, int irq, u8 mask)
-{
-	u8 reg, bits, tmp;
-	int ret = 0, idx;
-
-	idx = irq >> 3;
-	reg =  PCF50633_REG_INT1M + idx;
-	bits = 1 << (irq & 0x07);
-
-	mutex_lock(&pcf->lock);
-
-	if (mask) {
-		ret = __pcf50633_read(pcf, reg, 1, &tmp);
-		if (ret < 0)
-			goto out;
-
-		tmp |= bits;
-
-		ret = __pcf50633_write(pcf, reg, 1, &tmp);
-		if (ret < 0)
-			goto out;
-
-		pcf->mask_regs[idx] &= ~bits;
-		pcf->mask_regs[idx] |= bits;
-	} else {
-		ret = __pcf50633_read(pcf, reg, 1, &tmp);
-		if (ret < 0)
-			goto out;
-
-		tmp &= ~bits;
-
-		ret = __pcf50633_write(pcf, reg, 1, &tmp);
-		if (ret < 0)
-			goto out;
-
-		pcf->mask_regs[idx] &= ~bits;
-	}
-out:
-	mutex_unlock(&pcf->lock);
-
-	return ret;
-}
-
-int pcf50633_irq_mask(struct pcf50633 *pcf, int irq)
-{
-	dev_dbg(pcf->dev, "Masking IRQ %d\n", irq);
-
-	return __pcf50633_irq_mask_set(pcf, irq, 1);
-}
-EXPORT_SYMBOL_GPL(pcf50633_irq_mask);
-
-int pcf50633_irq_unmask(struct pcf50633 *pcf, int irq)
-{
-	dev_dbg(pcf->dev, "Unmasking IRQ %d\n", irq);
-
-	return __pcf50633_irq_mask_set(pcf, irq, 0);
-}
-EXPORT_SYMBOL_GPL(pcf50633_irq_unmask);
-
-int pcf50633_irq_mask_get(struct pcf50633 *pcf, int irq)
-{
-	u8 reg, bits;
-
-	reg =  irq >> 3;
-	bits = 1 << (irq & 0x07);
-
-	return pcf->mask_regs[reg] & bits;
-}
-EXPORT_SYMBOL_GPL(pcf50633_irq_mask_get);
-
-static void pcf50633_irq_call_handler(struct pcf50633 *pcf, int irq)
-{
-	if (pcf->irq_handler[irq].handler)
-		pcf->irq_handler[irq].handler(irq, pcf->irq_handler[irq].data);
-}
-
-/* Maximum amount of time ONKEY is held before emergency action is taken */
-#define PCF50633_ONKEY1S_TIMEOUT 8
-
-static void pcf50633_irq_worker(struct work_struct *work)
-{
-	struct pcf50633 *pcf;
-	int ret, i, j;
-	u8 pcf_int[5], chgstat;
-
-	pcf = container_of(work, struct pcf50633, irq_work);
-
-	/* Read the 5 INT regs in one transaction */
-	ret = pcf50633_read_block(pcf, PCF50633_REG_INT1,
-						ARRAY_SIZE(pcf_int), pcf_int);
-	if (ret != ARRAY_SIZE(pcf_int)) {
-		dev_err(pcf->dev, "Error reading INT registers\n");
-
-		/*
-		 * If this doesn't ACK the interrupt to the chip, we'll be
-		 * called once again as we're level triggered.
-		 */
-		goto out;
-	}
-
-	/* defeat 8s death from lowsys on A5 */
-	pcf50633_reg_write(pcf, PCF50633_REG_OOCSHDWN,  0x04);
-
-	/* We immediately read the usb and adapter status. We thus make sure
-	 * only of USBINS/USBREM IRQ handlers are called */
-	if (pcf_int[0] & (PCF50633_INT1_USBINS | PCF50633_INT1_USBREM)) {
-		chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
-		if (chgstat & (0x3 << 4))
-			pcf_int[0] &= ~(1 << PCF50633_INT1_USBREM);
-		else
-			pcf_int[0] &= ~(1 << PCF50633_INT1_USBINS);
-	}
-
-	/* Make sure only one of ADPINS or ADPREM is set */
-	if (pcf_int[0] & (PCF50633_INT1_ADPINS | PCF50633_INT1_ADPREM)) {
-		chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
-		if (chgstat & (0x3 << 4))
-			pcf_int[0] &= ~(1 << PCF50633_INT1_ADPREM);
-		else
-			pcf_int[0] &= ~(1 << PCF50633_INT1_ADPINS);
-	}
-
-	dev_dbg(pcf->dev, "INT1=0x%02x INT2=0x%02x INT3=0x%02x "
-			"INT4=0x%02x INT5=0x%02x\n", pcf_int[0],
-			pcf_int[1], pcf_int[2], pcf_int[3], pcf_int[4]);
-
-	/* Some revisions of the chip don't have a 8s standby mode on
-	 * ONKEY1S press. We try to manually do it in such cases. */
-	if ((pcf_int[0] & PCF50633_INT1_SECOND) && pcf->onkey1s_held) {
-		dev_info(pcf->dev, "ONKEY1S held for %d secs\n",
-							pcf->onkey1s_held);
-		if (pcf->onkey1s_held++ == PCF50633_ONKEY1S_TIMEOUT)
-			if (pcf->pdata->force_shutdown)
-				pcf->pdata->force_shutdown(pcf);
-	}
-
-	if (pcf_int[2] & PCF50633_INT3_ONKEY1S) {
-		dev_info(pcf->dev, "ONKEY1S held\n");
-		pcf->onkey1s_held = 1 ;
-
-		/* Unmask IRQ_SECOND */
-		pcf50633_reg_clear_bits(pcf, PCF50633_REG_INT1M,
-						PCF50633_INT1_SECOND);
-
-		/* Unmask IRQ_ONKEYR */
-		pcf50633_reg_clear_bits(pcf, PCF50633_REG_INT2M,
-						PCF50633_INT2_ONKEYR);
-	}
-
-	if ((pcf_int[1] & PCF50633_INT2_ONKEYR) && pcf->onkey1s_held) {
-		pcf->onkey1s_held = 0;
-
-		/* Mask SECOND and ONKEYR interrupts */
-		if (pcf->mask_regs[0] & PCF50633_INT1_SECOND)
-			pcf50633_reg_set_bit_mask(pcf,
-					PCF50633_REG_INT1M,
-					PCF50633_INT1_SECOND,
-					PCF50633_INT1_SECOND);
-
-		if (pcf->mask_regs[1] & PCF50633_INT2_ONKEYR)
-			pcf50633_reg_set_bit_mask(pcf,
-					PCF50633_REG_INT2M,
-					PCF50633_INT2_ONKEYR,
-					PCF50633_INT2_ONKEYR);
-	}
-
-	/* Have we just resumed ? */
-	if (pcf->is_suspended) {
-		pcf->is_suspended = 0;
-
-		/* Set the resume reason filtering out non resumers */
-		for (i = 0; i < ARRAY_SIZE(pcf_int); i++)
-			pcf->resume_reason[i] = pcf_int[i] &
-						pcf->pdata->resumers[i];
-
-		/* Make sure we don't pass on any ONKEY events to
-		 * userspace now */
-		pcf_int[1] &= ~(PCF50633_INT2_ONKEYR | PCF50633_INT2_ONKEYF);
-	}
-
-	for (i = 0; i < ARRAY_SIZE(pcf_int); i++) {
-		/* Unset masked interrupts */
-		pcf_int[i] &= ~pcf->mask_regs[i];
-
-		for (j = 0; j < 8 ; j++)
-			if (pcf_int[i] & (1 << j))
-				pcf50633_irq_call_handler(pcf, (i * 8) + j);
-	}
-
-out:
-	put_device(pcf->dev);
-	enable_irq(pcf->irq);
-}
-
-static irqreturn_t pcf50633_irq(int irq, void *data)
-{
-	struct pcf50633 *pcf = data;
-
-	dev_dbg(pcf->dev, "pcf50633_irq\n");
-
-	get_device(pcf->dev);
-	disable_irq_nosync(pcf->irq);
-	queue_work(pcf->work_queue, &pcf->irq_work);
-
-	return IRQ_HANDLED;
-}
-
 static void
 pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name,
 						struct platform_device **pdev)
@@ -479,70 +241,17 @@ pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name,
 static int pcf50633_suspend(struct i2c_client *client, pm_message_t state)
 {
 	struct pcf50633 *pcf;
-	int ret = 0, i;
-	u8 res[5];
-
 	pcf = i2c_get_clientdata(client);
 
-	/* Make sure our interrupt handlers are not called
-	 * henceforth */
-	disable_irq(pcf->irq);
-
-	/* Make sure that any running IRQ worker has quit */
-	cancel_work_sync(&pcf->irq_work);
-
-	/* Save the masks */
-	ret = pcf50633_read_block(pcf, PCF50633_REG_INT1M,
-				ARRAY_SIZE(pcf->suspend_irq_masks),
-					pcf->suspend_irq_masks);
-	if (ret < 0) {
-		dev_err(pcf->dev, "error saving irq masks\n");
-		goto out;
-	}
-
-	/* Write wakeup irq masks */
-	for (i = 0; i < ARRAY_SIZE(res); i++)
-		res[i] = ~pcf->pdata->resumers[i];
-
-	ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
-					ARRAY_SIZE(res), &res[0]);
-	if (ret < 0) {
-		dev_err(pcf->dev, "error writing wakeup irq masks\n");
-		goto out;
-	}
-
-	pcf->is_suspended = 1;
-
-out:
-	return ret;
+	return pcf50633_irq_suspend(pcf);
 }
 
 static int pcf50633_resume(struct i2c_client *client)
 {
 	struct pcf50633 *pcf;
-	int ret;
-
 	pcf = i2c_get_clientdata(client);
 
-	/* Write the saved mask registers */
-	ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
-				ARRAY_SIZE(pcf->suspend_irq_masks),
-					pcf->suspend_irq_masks);
-	if (ret < 0)
-		dev_err(pcf->dev, "Error restoring saved suspend masks\n");
-
-	/* Restore regulators' state */
-
-
-	get_device(pcf->dev);
-
-	/*
-	 * Clear any pending interrupts and set resume reason if any.
-	 * This will leave with enable_irq()
-	 */
-	pcf50633_irq_worker(&pcf->irq_work);
-
-	return 0;
+	return pcf50633_irq_resume(pcf);
 }
 #else
 #define pcf50633_suspend NULL
@@ -573,43 +282,19 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
 	i2c_set_clientdata(client, pcf);
 	pcf->dev = &client->dev;
 	pcf->i2c_client = client;
-	pcf->irq = client->irq;
-	pcf->work_queue = create_singlethread_workqueue("pcf50633");
-
-	if (!pcf->work_queue) {
-		dev_err(&client->dev, "Failed to alloc workqueue\n");
-		ret = -ENOMEM;
-		goto err_free;
-	}
-
-	INIT_WORK(&pcf->irq_work, pcf50633_irq_worker);
 
 	version = pcf50633_reg_read(pcf, 0);
 	variant = pcf50633_reg_read(pcf, 1);
 	if (version < 0 || variant < 0) {
 		dev_err(pcf->dev, "Unable to probe pcf50633\n");
 		ret = -ENODEV;
-		goto err_destroy_workqueue;
+		goto err_free;
 	}
 
 	dev_info(pcf->dev, "Probed device version %d variant %d\n",
 							version, variant);
 
-	/* Enable all interrupts except RTC SECOND */
-	pcf->mask_regs[0] = 0x80;
-	pcf50633_reg_write(pcf, PCF50633_REG_INT1M, pcf->mask_regs[0]);
-	pcf50633_reg_write(pcf, PCF50633_REG_INT2M, 0x00);
-	pcf50633_reg_write(pcf, PCF50633_REG_INT3M, 0x00);
-	pcf50633_reg_write(pcf, PCF50633_REG_INT4M, 0x00);
-	pcf50633_reg_write(pcf, PCF50633_REG_INT5M, 0x00);
-
-	ret = request_irq(client->irq, pcf50633_irq,
-					IRQF_TRIGGER_LOW, "pcf50633", pcf);
-
-	if (ret) {
-		dev_err(pcf->dev, "Failed to request IRQ %d\n", ret);
-		goto err_destroy_workqueue;
-	}
+	pcf50633_irq_init(pcf, client->irq);
 
 	/* Create sub devices */
 	pcf50633_client_dev_register(pcf, "pcf50633-input",
@@ -641,10 +326,6 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
 		platform_device_add(pdev);
 	}
 
-	if (enable_irq_wake(client->irq) < 0)
-		dev_err(pcf->dev, "IRQ %u cannot be enabled as wake-up source"
-			"in this hardware revision", client->irq);
-
 	ret = sysfs_create_group(&client->dev.kobj, &pcf_attr_group);
 	if (ret)
 		dev_err(pcf->dev, "error creating sysfs entries\n");
@@ -654,8 +335,6 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
 
 	return 0;
 
-err_destroy_workqueue:
-	destroy_workqueue(pcf->work_queue);
 err_free:
 	i2c_set_clientdata(client, NULL);
 	kfree(pcf);
@@ -668,8 +347,7 @@ static int __devexit pcf50633_remove(struct i2c_client *client)
 	struct pcf50633 *pcf = i2c_get_clientdata(client);
 	int i;
 
-	free_irq(pcf->irq, pcf);
-	destroy_workqueue(pcf->work_queue);
+	pcf50633_irq_free(pcf);
 
 	platform_device_unregister(pcf->input_pdev);
 	platform_device_unregister(pcf->rtc_pdev);
@@ -679,6 +357,7 @@ static int __devexit pcf50633_remove(struct i2c_client *client)
 	for (i = 0; i < PCF50633_NUM_REGULATORS; i++)
 		platform_device_unregister(pcf->regulator_pdev[i]);
 
+	i2c_set_clientdata(client, NULL);
 	kfree(pcf);
 
 	return 0;
diff --git a/drivers/mfd/pcf50633-irq.c b/drivers/mfd/pcf50633-irq.c
new file mode 100644
index 00000000000..1b0192f1eff
--- /dev/null
+++ b/drivers/mfd/pcf50633-irq.c
@@ -0,0 +1,318 @@
+/* NXP PCF50633 Power Management Unit (PMU) driver
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * 	   Balaji Rao <balajirrao@openmoko.org>
+ * All rights reserved.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+
+#include <linux/mfd/pcf50633/core.h>
+
+/* Two MBCS registers used during cold start */
+#define PCF50633_REG_MBCS1		0x4b
+#define PCF50633_REG_MBCS2		0x4c
+#define PCF50633_MBCS1_USBPRES 		0x01
+#define PCF50633_MBCS1_ADAPTPRES	0x01
+
+int pcf50633_register_irq(struct pcf50633 *pcf, int irq,
+			void (*handler) (int, void *), void *data)
+{
+	if (irq < 0 || irq >= PCF50633_NUM_IRQ || !handler)
+		return -EINVAL;
+
+	if (WARN_ON(pcf->irq_handler[irq].handler))
+		return -EBUSY;
+
+	mutex_lock(&pcf->lock);
+	pcf->irq_handler[irq].handler = handler;
+	pcf->irq_handler[irq].data = data;
+	mutex_unlock(&pcf->lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pcf50633_register_irq);
+
+int pcf50633_free_irq(struct pcf50633 *pcf, int irq)
+{
+	if (irq < 0 || irq >= PCF50633_NUM_IRQ)
+		return -EINVAL;
+
+	mutex_lock(&pcf->lock);
+	pcf->irq_handler[irq].handler = NULL;
+	mutex_unlock(&pcf->lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pcf50633_free_irq);
+
+static int __pcf50633_irq_mask_set(struct pcf50633 *pcf, int irq, u8 mask)
+{
+	u8 reg, bit;
+	int ret = 0, idx;
+
+	idx = irq >> 3;
+	reg = PCF50633_REG_INT1M + idx;
+	bit = 1 << (irq & 0x07);
+
+	pcf50633_reg_set_bit_mask(pcf, reg, bit, mask ? bit : 0);
+
+	mutex_lock(&pcf->lock);
+
+	if (mask)
+		pcf->mask_regs[idx] |= bit;
+	else
+		pcf->mask_regs[idx] &= ~bit;
+
+	mutex_unlock(&pcf->lock);
+
+	return ret;
+}
+
+int pcf50633_irq_mask(struct pcf50633 *pcf, int irq)
+{
+	dev_dbg(pcf->dev, "Masking IRQ %d\n", irq);
+
+	return __pcf50633_irq_mask_set(pcf, irq, 1);
+}
+EXPORT_SYMBOL_GPL(pcf50633_irq_mask);
+
+int pcf50633_irq_unmask(struct pcf50633 *pcf, int irq)
+{
+	dev_dbg(pcf->dev, "Unmasking IRQ %d\n", irq);
+
+	return __pcf50633_irq_mask_set(pcf, irq, 0);
+}
+EXPORT_SYMBOL_GPL(pcf50633_irq_unmask);
+
+int pcf50633_irq_mask_get(struct pcf50633 *pcf, int irq)
+{
+	u8 reg, bits;
+
+	reg =  irq >> 3;
+	bits = 1 << (irq & 0x07);
+
+	return pcf->mask_regs[reg] & bits;
+}
+EXPORT_SYMBOL_GPL(pcf50633_irq_mask_get);
+
+static void pcf50633_irq_call_handler(struct pcf50633 *pcf, int irq)
+{
+	if (pcf->irq_handler[irq].handler)
+		pcf->irq_handler[irq].handler(irq, pcf->irq_handler[irq].data);
+}
+
+/* Maximum amount of time ONKEY is held before emergency action is taken */
+#define PCF50633_ONKEY1S_TIMEOUT 8
+
+static irqreturn_t pcf50633_irq(int irq, void *data)
+{
+	struct pcf50633 *pcf = data;
+	int ret, i, j;
+	u8 pcf_int[5], chgstat;
+
+	/* Read the 5 INT regs in one transaction */
+	ret = pcf50633_read_block(pcf, PCF50633_REG_INT1,
+						ARRAY_SIZE(pcf_int), pcf_int);
+	if (ret != ARRAY_SIZE(pcf_int)) {
+		dev_err(pcf->dev, "Error reading INT registers\n");
+
+		/*
+		 * If this doesn't ACK the interrupt to the chip, we'll be
+		 * called once again as we're level triggered.
+		 */
+		goto out;
+	}
+
+	/* defeat 8s death from lowsys on A5 */
+	pcf50633_reg_write(pcf, PCF50633_REG_OOCSHDWN,  0x04);
+
+	/* We immediately read the usb and adapter status. We thus make sure
+	 * only of USBINS/USBREM IRQ handlers are called */
+	if (pcf_int[0] & (PCF50633_INT1_USBINS | PCF50633_INT1_USBREM)) {
+		chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
+		if (chgstat & (0x3 << 4))
+			pcf_int[0] &= ~PCF50633_INT1_USBREM;
+		else
+			pcf_int[0] &= ~PCF50633_INT1_USBINS;
+	}
+
+	/* Make sure only one of ADPINS or ADPREM is set */
+	if (pcf_int[0] & (PCF50633_INT1_ADPINS | PCF50633_INT1_ADPREM)) {
+		chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
+		if (chgstat & (0x3 << 4))
+			pcf_int[0] &= ~PCF50633_INT1_ADPREM;
+		else
+			pcf_int[0] &= ~PCF50633_INT1_ADPINS;
+	}
+
+	dev_dbg(pcf->dev, "INT1=0x%02x INT2=0x%02x INT3=0x%02x "
+			"INT4=0x%02x INT5=0x%02x\n", pcf_int[0],
+			pcf_int[1], pcf_int[2], pcf_int[3], pcf_int[4]);
+
+	/* Some revisions of the chip don't have a 8s standby mode on
+	 * ONKEY1S press. We try to manually do it in such cases. */
+	if ((pcf_int[0] & PCF50633_INT1_SECOND) && pcf->onkey1s_held) {
+		dev_info(pcf->dev, "ONKEY1S held for %d secs\n",
+							pcf->onkey1s_held);
+		if (pcf->onkey1s_held++ == PCF50633_ONKEY1S_TIMEOUT)
+			if (pcf->pdata->force_shutdown)
+				pcf->pdata->force_shutdown(pcf);
+	}
+
+	if (pcf_int[2] & PCF50633_INT3_ONKEY1S) {
+		dev_info(pcf->dev, "ONKEY1S held\n");
+		pcf->onkey1s_held = 1 ;
+
+		/* Unmask IRQ_SECOND */
+		pcf50633_reg_clear_bits(pcf, PCF50633_REG_INT1M,
+						PCF50633_INT1_SECOND);
+
+		/* Unmask IRQ_ONKEYR */
+		pcf50633_reg_clear_bits(pcf, PCF50633_REG_INT2M,
+						PCF50633_INT2_ONKEYR);
+	}
+
+	if ((pcf_int[1] & PCF50633_INT2_ONKEYR) && pcf->onkey1s_held) {
+		pcf->onkey1s_held = 0;
+
+		/* Mask SECOND and ONKEYR interrupts */
+		if (pcf->mask_regs[0] & PCF50633_INT1_SECOND)
+			pcf50633_reg_set_bit_mask(pcf,
+					PCF50633_REG_INT1M,
+					PCF50633_INT1_SECOND,
+					PCF50633_INT1_SECOND);
+
+		if (pcf->mask_regs[1] & PCF50633_INT2_ONKEYR)
+			pcf50633_reg_set_bit_mask(pcf,
+					PCF50633_REG_INT2M,
+					PCF50633_INT2_ONKEYR,
+					PCF50633_INT2_ONKEYR);
+	}
+
+	/* Have we just resumed ? */
+	if (pcf->is_suspended) {
+		pcf->is_suspended = 0;
+
+		/* Set the resume reason filtering out non resumers */
+		for (i = 0; i < ARRAY_SIZE(pcf_int); i++)
+			pcf->resume_reason[i] = pcf_int[i] &
+						pcf->pdata->resumers[i];
+
+		/* Make sure we don't pass on any ONKEY events to
+		 * userspace now */
+		pcf_int[1] &= ~(PCF50633_INT2_ONKEYR | PCF50633_INT2_ONKEYF);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(pcf_int); i++) {
+		/* Unset masked interrupts */
+		pcf_int[i] &= ~pcf->mask_regs[i];
+
+		for (j = 0; j < 8 ; j++)
+			if (pcf_int[i] & (1 << j))
+				pcf50633_irq_call_handler(pcf, (i * 8) + j);
+	}
+
+out:
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_PM
+
+int pcf50633_irq_suspend(struct pcf50633 *pcf)
+{
+	int ret;
+	int i;
+	u8 res[5];
+
+
+	/* Make sure our interrupt handlers are not called
+	 * henceforth */
+	disable_irq(pcf->irq);
+
+	/* Save the masks */
+	ret = pcf50633_read_block(pcf, PCF50633_REG_INT1M,
+				ARRAY_SIZE(pcf->suspend_irq_masks),
+					pcf->suspend_irq_masks);
+	if (ret < 0) {
+		dev_err(pcf->dev, "error saving irq masks\n");
+		goto out;
+	}
+
+	/* Write wakeup irq masks */
+	for (i = 0; i < ARRAY_SIZE(res); i++)
+		res[i] = ~pcf->pdata->resumers[i];
+
+	ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
+					ARRAY_SIZE(res), &res[0]);
+	if (ret < 0) {
+		dev_err(pcf->dev, "error writing wakeup irq masks\n");
+		goto out;
+	}
+
+	pcf->is_suspended = 1;
+
+out:
+	return ret;
+}
+
+int pcf50633_irq_resume(struct pcf50633 *pcf)
+{
+	int ret;
+
+	/* Write the saved mask registers */
+	ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
+				ARRAY_SIZE(pcf->suspend_irq_masks),
+					pcf->suspend_irq_masks);
+	if (ret < 0)
+		dev_err(pcf->dev, "Error restoring saved suspend masks\n");
+
+	enable_irq(pcf->irq);
+
+	return ret;
+}
+
+#endif
+
+int pcf50633_irq_init(struct pcf50633 *pcf, int irq)
+{
+	int ret;
+
+	pcf->irq = irq;
+
+	/* Enable all interrupts except RTC SECOND */
+	pcf->mask_regs[0] = 0x80;
+	pcf50633_reg_write(pcf, PCF50633_REG_INT1M, pcf->mask_regs[0]);
+	pcf50633_reg_write(pcf, PCF50633_REG_INT2M, 0x00);
+	pcf50633_reg_write(pcf, PCF50633_REG_INT3M, 0x00);
+	pcf50633_reg_write(pcf, PCF50633_REG_INT4M, 0x00);
+	pcf50633_reg_write(pcf, PCF50633_REG_INT5M, 0x00);
+
+	ret = request_threaded_irq(irq, NULL, pcf50633_irq,
+					IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					"pcf50633", pcf);
+
+	if (ret)
+		dev_err(pcf->dev, "Failed to request IRQ %d\n", ret);
+
+	if (enable_irq_wake(irq) < 0)
+		dev_err(pcf->dev, "IRQ %u cannot be enabled as wake-up source"
+			"in this hardware revision", irq);
+
+	return ret;
+}
+
+void pcf50633_irq_free(struct pcf50633 *pcf)
+{
+	free_irq(pcf->irq, pcf);
+}
diff --git a/drivers/mfd/rdc321x-southbridge.c b/drivers/mfd/rdc321x-southbridge.c
new file mode 100644
index 00000000000..50922975bda
--- /dev/null
+++ b/drivers/mfd/rdc321x-southbridge.c
@@ -0,0 +1,123 @@
+/*
+ * RDC321x MFD southbrige driver
+ *
+ * Copyright (C) 2007-2010 Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2010 Bernhard Loos <bernhardloos@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rdc321x.h>
+
+static struct rdc321x_wdt_pdata rdc321x_wdt_pdata;
+
+static struct resource rdc321x_wdt_resource[] = {
+	{
+		.name	= "wdt-reg",
+		.start	= RDC321X_WDT_CTRL,
+		.end	= RDC321X_WDT_CTRL + 0x3,
+		.flags	= IORESOURCE_IO,
+	}
+};
+
+static struct rdc321x_gpio_pdata rdc321x_gpio_pdata = {
+	.max_gpios	= RDC321X_MAX_GPIO,
+};
+
+static struct resource rdc321x_gpio_resources[] = {
+	{
+		.name	= "gpio-reg1",
+		.start	= RDC321X_GPIO_CTRL_REG1,
+		.end	= RDC321X_GPIO_CTRL_REG1 + 0x7,
+		.flags	= IORESOURCE_IO,
+	}, {
+		.name	= "gpio-reg2",
+		.start	= RDC321X_GPIO_CTRL_REG2,
+		.end	= RDC321X_GPIO_CTRL_REG2 + 0x7,
+		.flags	= IORESOURCE_IO,
+	}
+};
+
+static struct mfd_cell rdc321x_sb_cells[] = {
+	{
+		.name		= "rdc321x-wdt",
+		.resources	= rdc321x_wdt_resource,
+		.num_resources	= ARRAY_SIZE(rdc321x_wdt_resource),
+		.driver_data	= &rdc321x_wdt_pdata,
+	}, {
+		.name		= "rdc321x-gpio",
+		.resources	= rdc321x_gpio_resources,
+		.num_resources	= ARRAY_SIZE(rdc321x_gpio_resources),
+		.driver_data	= &rdc321x_gpio_pdata,
+	},
+};
+
+static int __devinit rdc321x_sb_probe(struct pci_dev *pdev,
+					const struct pci_device_id *ent)
+{
+	int err;
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable device\n");
+		return err;
+	}
+
+	rdc321x_gpio_pdata.sb_pdev = pdev;
+	rdc321x_wdt_pdata.sb_pdev = pdev;
+
+	return mfd_add_devices(&pdev->dev, -1,
+		rdc321x_sb_cells, ARRAY_SIZE(rdc321x_sb_cells), NULL, 0);
+}
+
+static void __devexit rdc321x_sb_remove(struct pci_dev *pdev)
+{
+	mfd_remove_devices(&pdev->dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(rdc321x_sb_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_RDC, PCI_DEVICE_ID_RDC_R6030) },
+	{}
+};
+
+static struct pci_driver rdc321x_sb_driver = {
+	.name		= "RDC321x Southbridge",
+	.id_table	= rdc321x_sb_table,
+	.probe		= rdc321x_sb_probe,
+	.remove		= __devexit_p(rdc321x_sb_remove),
+};
+
+static int __init rdc321x_sb_init(void)
+{
+	return pci_register_driver(&rdc321x_sb_driver);
+}
+
+static void __exit rdc321x_sb_exit(void)
+{
+	pci_unregister_driver(&rdc321x_sb_driver);
+}
+
+module_init(rdc321x_sb_init);
+module_exit(rdc321x_sb_exit);
+
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("RDC R-321x MFD southbridge driver");
diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c
index da6383a934a..5041d33adf0 100644
--- a/drivers/mfd/t7l66xb.c
+++ b/drivers/mfd/t7l66xb.c
@@ -318,6 +318,9 @@ static int t7l66xb_probe(struct platform_device *dev)
 	struct resource *iomem, *rscr;
 	int ret;
 
+	if (pdata == NULL)
+		return -EINVAL;
+
 	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
 	if (!iomem)
 		return -EINVAL;
diff --git a/drivers/mfd/tc35892.c b/drivers/mfd/tc35892.c
new file mode 100644
index 00000000000..715f095dd7a
--- /dev/null
+++ b/drivers/mfd/tc35892.c
@@ -0,0 +1,347 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Hanumath Prasad <hanumath.prasad@stericsson.com> for ST-Ericsson
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tc35892.h>
+
+/**
+ * tc35892_reg_read() - read a single TC35892 register
+ * @tc35892:	Device to read from
+ * @reg:	Register to read
+ */
+int tc35892_reg_read(struct tc35892 *tc35892, u8 reg)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(tc35892->i2c, reg);
+	if (ret < 0)
+		dev_err(tc35892->dev, "failed to read reg %#x: %d\n",
+			reg, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(tc35892_reg_read);
+
+/**
+ * tc35892_reg_read() - write a single TC35892 register
+ * @tc35892:	Device to write to
+ * @reg:	Register to read
+ * @data:	Value to write
+ */
+int tc35892_reg_write(struct tc35892 *tc35892, u8 reg, u8 data)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(tc35892->i2c, reg, data);
+	if (ret < 0)
+		dev_err(tc35892->dev, "failed to write reg %#x: %d\n",
+			reg, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(tc35892_reg_write);
+
+/**
+ * tc35892_block_read() - read multiple TC35892 registers
+ * @tc35892:	Device to read from
+ * @reg:	First register
+ * @length:	Number of registers
+ * @values:	Buffer to write to
+ */
+int tc35892_block_read(struct tc35892 *tc35892, u8 reg, u8 length, u8 *values)
+{
+	int ret;
+
+	ret = i2c_smbus_read_i2c_block_data(tc35892->i2c, reg, length, values);
+	if (ret < 0)
+		dev_err(tc35892->dev, "failed to read regs %#x: %d\n",
+			reg, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(tc35892_block_read);
+
+/**
+ * tc35892_block_write() - write multiple TC35892 registers
+ * @tc35892:	Device to write to
+ * @reg:	First register
+ * @length:	Number of registers
+ * @values:	Values to write
+ */
+int tc35892_block_write(struct tc35892 *tc35892, u8 reg, u8 length,
+			const u8 *values)
+{
+	int ret;
+
+	ret = i2c_smbus_write_i2c_block_data(tc35892->i2c, reg, length,
+					     values);
+	if (ret < 0)
+		dev_err(tc35892->dev, "failed to write regs %#x: %d\n",
+			reg, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(tc35892_block_write);
+
+/**
+ * tc35892_set_bits() - set the value of a bitfield in a TC35892 register
+ * @tc35892:	Device to write to
+ * @reg:	Register to write
+ * @mask:	Mask of bits to set
+ * @values:	Value to set
+ */
+int tc35892_set_bits(struct tc35892 *tc35892, u8 reg, u8 mask, u8 val)
+{
+	int ret;
+
+	mutex_lock(&tc35892->lock);
+
+	ret = tc35892_reg_read(tc35892, reg);
+	if (ret < 0)
+		goto out;
+
+	ret &= ~mask;
+	ret |= val;
+
+	ret = tc35892_reg_write(tc35892, reg, ret);
+
+out:
+	mutex_unlock(&tc35892->lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(tc35892_set_bits);
+
+static struct resource gpio_resources[] = {
+	{
+		.start	= TC35892_INT_GPIIRQ,
+		.end	= TC35892_INT_GPIIRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mfd_cell tc35892_devs[] = {
+	{
+		.name		= "tc35892-gpio",
+		.num_resources	= ARRAY_SIZE(gpio_resources),
+		.resources	= &gpio_resources[0],
+	},
+};
+
+static irqreturn_t tc35892_irq(int irq, void *data)
+{
+	struct tc35892 *tc35892 = data;
+	int status;
+
+	status = tc35892_reg_read(tc35892, TC35892_IRQST);
+	if (status < 0)
+		return IRQ_NONE;
+
+	while (status) {
+		int bit = __ffs(status);
+
+		handle_nested_irq(tc35892->irq_base + bit);
+		status &= ~(1 << bit);
+	}
+
+	/*
+	 * A dummy read or write (to any register) appears to be necessary to
+	 * have the last interrupt clear (for example, GPIO IC write) take
+	 * effect.
+	 */
+	tc35892_reg_read(tc35892, TC35892_IRQST);
+
+	return IRQ_HANDLED;
+}
+
+static void tc35892_irq_dummy(unsigned int irq)
+{
+	/* No mask/unmask at this level */
+}
+
+static struct irq_chip tc35892_irq_chip = {
+	.name	= "tc35892",
+	.mask	= tc35892_irq_dummy,
+	.unmask	= tc35892_irq_dummy,
+};
+
+static int tc35892_irq_init(struct tc35892 *tc35892)
+{
+	int base = tc35892->irq_base;
+	int irq;
+
+	for (irq = base; irq < base + TC35892_NR_INTERNAL_IRQS; irq++) {
+		set_irq_chip_data(irq, tc35892);
+		set_irq_chip_and_handler(irq, &tc35892_irq_chip,
+					 handle_edge_irq);
+		set_irq_nested_thread(irq, 1);
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, IRQF_VALID);
+#else
+		set_irq_noprobe(irq);
+#endif
+	}
+
+	return 0;
+}
+
+static void tc35892_irq_remove(struct tc35892 *tc35892)
+{
+	int base = tc35892->irq_base;
+	int irq;
+
+	for (irq = base; irq < base + TC35892_NR_INTERNAL_IRQS; irq++) {
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, 0);
+#endif
+		set_irq_chip_and_handler(irq, NULL, NULL);
+		set_irq_chip_data(irq, NULL);
+	}
+}
+
+static int tc35892_chip_init(struct tc35892 *tc35892)
+{
+	int manf, ver, ret;
+
+	manf = tc35892_reg_read(tc35892, TC35892_MANFCODE);
+	if (manf < 0)
+		return manf;
+
+	ver = tc35892_reg_read(tc35892, TC35892_VERSION);
+	if (ver < 0)
+		return ver;
+
+	if (manf != TC35892_MANFCODE_MAGIC) {
+		dev_err(tc35892->dev, "unknown manufacturer: %#x\n", manf);
+		return -EINVAL;
+	}
+
+	dev_info(tc35892->dev, "manufacturer: %#x, version: %#x\n", manf, ver);
+
+	/* Put everything except the IRQ module into reset */
+	ret = tc35892_reg_write(tc35892, TC35892_RSTCTRL,
+				TC35892_RSTCTRL_TIMRST
+				| TC35892_RSTCTRL_ROTRST
+				| TC35892_RSTCTRL_KBDRST
+				| TC35892_RSTCTRL_GPIRST);
+	if (ret < 0)
+		return ret;
+
+	/* Clear the reset interrupt. */
+	return tc35892_reg_write(tc35892, TC35892_RSTINTCLR, 0x1);
+}
+
+static int __devinit tc35892_probe(struct i2c_client *i2c,
+				   const struct i2c_device_id *id)
+{
+	struct tc35892_platform_data *pdata = i2c->dev.platform_data;
+	struct tc35892 *tc35892;
+	int ret;
+
+	if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA
+				     | I2C_FUNC_SMBUS_I2C_BLOCK))
+		return -EIO;
+
+	tc35892 = kzalloc(sizeof(struct tc35892), GFP_KERNEL);
+	if (!tc35892)
+		return -ENOMEM;
+
+	mutex_init(&tc35892->lock);
+
+	tc35892->dev = &i2c->dev;
+	tc35892->i2c = i2c;
+	tc35892->pdata = pdata;
+	tc35892->irq_base = pdata->irq_base;
+	tc35892->num_gpio = id->driver_data;
+
+	i2c_set_clientdata(i2c, tc35892);
+
+	ret = tc35892_chip_init(tc35892);
+	if (ret)
+		goto out_free;
+
+	ret = tc35892_irq_init(tc35892);
+	if (ret)
+		goto out_free;
+
+	ret = request_threaded_irq(tc35892->i2c->irq, NULL, tc35892_irq,
+				   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				   "tc35892", tc35892);
+	if (ret) {
+		dev_err(tc35892->dev, "failed to request IRQ: %d\n", ret);
+		goto out_removeirq;
+	}
+
+	ret = mfd_add_devices(tc35892->dev, -1, tc35892_devs,
+			      ARRAY_SIZE(tc35892_devs), NULL,
+			      tc35892->irq_base);
+	if (ret) {
+		dev_err(tc35892->dev, "failed to add children\n");
+		goto out_freeirq;
+	}
+
+	return 0;
+
+out_freeirq:
+	free_irq(tc35892->i2c->irq, tc35892);
+out_removeirq:
+	tc35892_irq_remove(tc35892);
+out_free:
+	i2c_set_clientdata(i2c, NULL);
+	kfree(tc35892);
+	return ret;
+}
+
+static int __devexit tc35892_remove(struct i2c_client *client)
+{
+	struct tc35892 *tc35892 = i2c_get_clientdata(client);
+
+	mfd_remove_devices(tc35892->dev);
+
+	free_irq(tc35892->i2c->irq, tc35892);
+	tc35892_irq_remove(tc35892);
+
+	i2c_set_clientdata(client, NULL);
+	kfree(tc35892);
+
+	return 0;
+}
+
+static const struct i2c_device_id tc35892_id[] = {
+	{ "tc35892", 24 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tc35892_id);
+
+static struct i2c_driver tc35892_driver = {
+	.driver.name	= "tc35892",
+	.driver.owner	= THIS_MODULE,
+	.probe		= tc35892_probe,
+	.remove		= __devexit_p(tc35892_remove),
+	.id_table	= tc35892_id,
+};
+
+static int __init tc35892_init(void)
+{
+	return i2c_add_driver(&tc35892_driver);
+}
+subsys_initcall(tc35892_init);
+
+static void __exit tc35892_exit(void)
+{
+	i2c_del_driver(&tc35892_driver);
+}
+module_exit(tc35892_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TC35892 MFD core driver");
+MODULE_AUTHOR("Hanumath Prasad, Rabin Vincent");
diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c
index 7f478ec4184..ac5995026c8 100644
--- a/drivers/mfd/timberdale.c
+++ b/drivers/mfd/timberdale.c
@@ -31,6 +31,7 @@
 
 #include <linux/i2c.h>
 #include <linux/i2c-ocores.h>
+#include <linux/i2c-xiic.h>
 #include <linux/i2c/tsc2007.h>
 
 #include <linux/spi/spi.h>
@@ -40,6 +41,8 @@
 
 #include <media/timb_radio.h>
 
+#include <linux/timb_dma.h>
+
 #include "timberdale.h"
 
 #define DRIVER_NAME "timberdale"
@@ -69,6 +72,12 @@ static struct i2c_board_info timberdale_i2c_board_info[] = {
 	},
 };
 
+static __devinitdata struct xiic_i2c_platform_data
+timberdale_xiic_platform_data = {
+	.devices = timberdale_i2c_board_info,
+	.num_devices = ARRAY_SIZE(timberdale_i2c_board_info)
+};
+
 static __devinitdata struct ocores_i2c_platform_data
 timberdale_ocores_platform_data = {
 	.regstep = 4,
@@ -77,7 +86,20 @@ timberdale_ocores_platform_data = {
 	.num_devices = ARRAY_SIZE(timberdale_i2c_board_info)
 };
 
-const static __devinitconst struct resource timberdale_ocores_resources[] = {
+static const __devinitconst struct resource timberdale_xiic_resources[] = {
+	{
+		.start	= XIICOFFSET,
+		.end	= XIICEND,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_TIMBERDALE_I2C,
+		.end	= IRQ_TIMBERDALE_I2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static const __devinitconst struct resource timberdale_ocores_resources[] = {
 	{
 		.start	= OCORESOFFSET,
 		.end	= OCORESEND,
@@ -126,7 +148,7 @@ static __devinitdata struct xspi_platform_data timberdale_xspi_platform_data = {
 	 */
 };
 
-const static __devinitconst struct resource timberdale_spi_resources[] = {
+static const __devinitconst struct resource timberdale_spi_resources[] = {
 	{
 		.start 	= SPIOFFSET,
 		.end	= SPIEND,
@@ -139,7 +161,7 @@ const static __devinitconst struct resource timberdale_spi_resources[] = {
 	},
 };
 
-const static __devinitconst struct resource timberdale_eth_resources[] = {
+static const __devinitconst struct resource timberdale_eth_resources[] = {
 	{
 		.start	= ETHOFFSET,
 		.end	= ETHEND,
@@ -159,7 +181,7 @@ static __devinitdata struct timbgpio_platform_data
 	.irq_base = 200,
 };
 
-const static __devinitconst struct resource timberdale_gpio_resources[] = {
+static const __devinitconst struct resource timberdale_gpio_resources[] = {
 	{
 		.start	= GPIOOFFSET,
 		.end	= GPIOEND,
@@ -172,7 +194,7 @@ const static __devinitconst struct resource timberdale_gpio_resources[] = {
 	},
 };
 
-const static __devinitconst struct resource timberdale_mlogicore_resources[] = {
+static const __devinitconst struct resource timberdale_mlogicore_resources[] = {
 	{
 		.start	= MLCOREOFFSET,
 		.end	= MLCOREEND,
@@ -190,7 +212,7 @@ const static __devinitconst struct resource timberdale_mlogicore_resources[] = {
 	},
 };
 
-const static __devinitconst struct resource timberdale_uart_resources[] = {
+static const __devinitconst struct resource timberdale_uart_resources[] = {
 	{
 		.start	= UARTOFFSET,
 		.end	= UARTEND,
@@ -203,7 +225,7 @@ const static __devinitconst struct resource timberdale_uart_resources[] = {
 	},
 };
 
-const static __devinitconst struct resource timberdale_uartlite_resources[] = {
+static const __devinitconst struct resource timberdale_uartlite_resources[] = {
 	{
 		.start	= UARTLITEOFFSET,
 		.end	= UARTLITEEND,
@@ -216,7 +238,7 @@ const static __devinitconst struct resource timberdale_uartlite_resources[] = {
 	},
 };
 
-const static __devinitconst struct resource timberdale_radio_resources[] = {
+static const __devinitconst struct resource timberdale_radio_resources[] = {
 	{
 		.start	= RDSOFFSET,
 		.end	= RDSEND,
@@ -250,7 +272,66 @@ static __devinitdata struct timb_radio_platform_data
 	}
 };
 
-const static __devinitconst struct resource timberdale_dma_resources[] = {
+static __devinitdata struct timb_dma_platform_data timb_dma_platform_data = {
+	.nr_channels = 10,
+	.channels = {
+		{
+			/* UART RX */
+			.rx = true,
+			.descriptors = 2,
+			.descriptor_elements = 1
+		},
+		{
+			/* UART TX */
+			.rx = false,
+			.descriptors = 2,
+			.descriptor_elements = 1
+		},
+		{
+			/* MLB RX */
+			.rx = true,
+			.descriptors = 2,
+			.descriptor_elements = 1
+		},
+		{
+			/* MLB TX */
+			.rx = false,
+			.descriptors = 2,
+			.descriptor_elements = 1
+		},
+		{
+			/* Video RX */
+			.rx = true,
+			.bytes_per_line = 1440,
+			.descriptors = 2,
+			.descriptor_elements = 16
+		},
+		{
+			/* Video framedrop */
+		},
+		{
+			/* SDHCI RX */
+			.rx = true,
+		},
+		{
+			/* SDHCI TX */
+		},
+		{
+			/* ETH RX */
+			.rx = true,
+			.descriptors = 2,
+			.descriptor_elements = 1
+		},
+		{
+			/* ETH TX */
+			.rx = false,
+			.descriptors = 2,
+			.descriptor_elements = 1
+		},
+	}
+};
+
+static const __devinitconst struct resource timberdale_dma_resources[] = {
 	{
 		.start	= DMAOFFSET,
 		.end	= DMAEND,
@@ -265,11 +346,25 @@ const static __devinitconst struct resource timberdale_dma_resources[] = {
 
 static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg0[] = {
 	{
+		.name = "timb-dma",
+		.num_resources = ARRAY_SIZE(timberdale_dma_resources),
+		.resources = timberdale_dma_resources,
+		.platform_data = &timb_dma_platform_data,
+		.data_size = sizeof(timb_dma_platform_data),
+	},
+	{
 		.name = "timb-uart",
 		.num_resources = ARRAY_SIZE(timberdale_uart_resources),
 		.resources = timberdale_uart_resources,
 	},
 	{
+		.name = "xiic-i2c",
+		.num_resources = ARRAY_SIZE(timberdale_xiic_resources),
+		.resources = timberdale_xiic_resources,
+		.platform_data = &timberdale_xiic_platform_data,
+		.data_size = sizeof(timberdale_xiic_platform_data),
+	},
+	{
 		.name = "timb-gpio",
 		.num_resources = ARRAY_SIZE(timberdale_gpio_resources),
 		.resources = timberdale_gpio_resources,
@@ -295,14 +390,16 @@ static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg0[] = {
 		.num_resources = ARRAY_SIZE(timberdale_eth_resources),
 		.resources = timberdale_eth_resources,
 	},
+};
+
+static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg1[] = {
 	{
 		.name = "timb-dma",
 		.num_resources = ARRAY_SIZE(timberdale_dma_resources),
 		.resources = timberdale_dma_resources,
+		.platform_data = &timb_dma_platform_data,
+		.data_size = sizeof(timb_dma_platform_data),
 	},
-};
-
-static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg1[] = {
 	{
 		.name = "timb-uart",
 		.num_resources = ARRAY_SIZE(timberdale_uart_resources),
@@ -314,6 +411,13 @@ static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg1[] = {
 		.resources = timberdale_uartlite_resources,
 	},
 	{
+		.name = "xiic-i2c",
+		.num_resources = ARRAY_SIZE(timberdale_xiic_resources),
+		.resources = timberdale_xiic_resources,
+		.platform_data = &timberdale_xiic_platform_data,
+		.data_size = sizeof(timberdale_xiic_platform_data),
+	},
+	{
 		.name = "timb-gpio",
 		.num_resources = ARRAY_SIZE(timberdale_gpio_resources),
 		.resources = timberdale_gpio_resources,
@@ -344,20 +448,29 @@ static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg1[] = {
 		.num_resources = ARRAY_SIZE(timberdale_eth_resources),
 		.resources = timberdale_eth_resources,
 	},
+};
+
+static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg2[] = {
 	{
 		.name = "timb-dma",
 		.num_resources = ARRAY_SIZE(timberdale_dma_resources),
 		.resources = timberdale_dma_resources,
+		.platform_data = &timb_dma_platform_data,
+		.data_size = sizeof(timb_dma_platform_data),
 	},
-};
-
-static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg2[] = {
 	{
 		.name = "timb-uart",
 		.num_resources = ARRAY_SIZE(timberdale_uart_resources),
 		.resources = timberdale_uart_resources,
 	},
 	{
+		.name = "xiic-i2c",
+		.num_resources = ARRAY_SIZE(timberdale_xiic_resources),
+		.resources = timberdale_xiic_resources,
+		.platform_data = &timberdale_xiic_platform_data,
+		.data_size = sizeof(timberdale_xiic_platform_data),
+	},
+	{
 		.name = "timb-gpio",
 		.num_resources = ARRAY_SIZE(timberdale_gpio_resources),
 		.resources = timberdale_gpio_resources,
@@ -378,14 +491,16 @@ static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg2[] = {
 		.platform_data = &timberdale_xspi_platform_data,
 		.data_size = sizeof(timberdale_xspi_platform_data),
 	},
+};
+
+static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg3[] = {
 	{
 		.name = "timb-dma",
 		.num_resources = ARRAY_SIZE(timberdale_dma_resources),
 		.resources = timberdale_dma_resources,
+		.platform_data = &timb_dma_platform_data,
+		.data_size = sizeof(timb_dma_platform_data),
 	},
-};
-
-static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg3[] = {
 	{
 		.name = "timb-uart",
 		.num_resources = ARRAY_SIZE(timberdale_uart_resources),
@@ -424,11 +539,6 @@ static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg3[] = {
 		.num_resources = ARRAY_SIZE(timberdale_eth_resources),
 		.resources = timberdale_eth_resources,
 	},
-	{
-		.name = "timb-dma",
-		.num_resources = ARRAY_SIZE(timberdale_dma_resources),
-		.resources = timberdale_dma_resources,
-	},
 };
 
 static const __devinitconst struct resource timberdale_sdhc_resources[] = {
diff --git a/drivers/mfd/timberdale.h b/drivers/mfd/timberdale.h
index 8d27ffabc25..c11bf6ebfe0 100644
--- a/drivers/mfd/timberdale.h
+++ b/drivers/mfd/timberdale.h
@@ -23,7 +23,7 @@
 #ifndef MFD_TIMBERDALE_H
 #define MFD_TIMBERDALE_H
 
-#define DRV_VERSION		"0.1"
+#define DRV_VERSION		"0.2"
 
 /* This driver only support versions >= 3.8 and < 4.0  */
 #define TIMB_SUPPORTED_MAJOR	3
@@ -66,7 +66,7 @@
 
 #define CHIPCTLOFFSET	0x800
 #define CHIPCTLEND	0x8ff
-#define CHIPCTLSIZE	(CHIPCTLEND - CHIPCTLOFFSET)
+#define CHIPCTLSIZE	(CHIPCTLEND - CHIPCTLOFFSET + 1)
 
 #define INTCOFFSET	0xc00
 #define INTCEND		0xfff
@@ -127,4 +127,16 @@
 #define GPIO_PIN_BT_RST		15
 #define GPIO_NR_PINS		16
 
+/* DMA Channels */
+#define DMA_UART_RX         0
+#define DMA_UART_TX         1
+#define DMA_MLB_RX          2
+#define DMA_MLB_TX          3
+#define DMA_VIDEO_RX        4
+#define DMA_VIDEO_DROP      5
+#define DMA_SDHCI_RX        6
+#define DMA_SDHCI_TX        7
+#define DMA_ETH_RX          8
+#define DMA_ETH_TX          9
+
 #endif
diff --git a/drivers/mfd/tps65010.c b/drivers/mfd/tps65010.c
index e5955306c2f..9b22a77f70f 100644
--- a/drivers/mfd/tps65010.c
+++ b/drivers/mfd/tps65010.c
@@ -530,8 +530,8 @@ static int __exit tps65010_remove(struct i2c_client *client)
 	cancel_delayed_work(&tps->work);
 	flush_scheduled_work();
 	debugfs_remove(tps->file);
-	kfree(tps);
 	i2c_set_clientdata(client, NULL);
+	kfree(tps);
 	the_tps = NULL;
 	return 0;
 }
diff --git a/drivers/mfd/tps6507x.c b/drivers/mfd/tps6507x.c
new file mode 100644
index 00000000000..d859dffed39
--- /dev/null
+++ b/drivers/mfd/tps6507x.c
@@ -0,0 +1,159 @@
+/*
+ * tps6507x.c  --  TPS6507x chip family multi-function driver
+ *
+ *  Copyright (c) 2010 RidgeRun (todd.fischer@ridgerun.com)
+ *
+ * Author: Todd Fischer
+ *         todd.fischer@ridgerun.com
+ *
+ * Credits:
+ *
+ *    Using code from wm831x-*.c, wm8400-core, Wolfson Microelectronics PLC.
+ *
+ * For licencing details see kernel-base/COPYING
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tps6507x.h>
+
+static struct mfd_cell tps6507x_devs[] = {
+	{
+		.name = "tps6507x-pmic",
+	},
+	{
+		.name = "tps6507x-ts",
+	},
+};
+
+
+static int tps6507x_i2c_read_device(struct tps6507x_dev *tps6507x, char reg,
+				  int bytes, void *dest)
+{
+	struct i2c_client *i2c = tps6507x->i2c_client;
+	struct i2c_msg xfer[2];
+	int ret;
+
+	/* Write register */
+	xfer[0].addr = i2c->addr;
+	xfer[0].flags = 0;
+	xfer[0].len = 1;
+	xfer[0].buf = &reg;
+
+	/* Read data */
+	xfer[1].addr = i2c->addr;
+	xfer[1].flags = I2C_M_RD;
+	xfer[1].len = bytes;
+	xfer[1].buf = dest;
+
+	ret = i2c_transfer(i2c->adapter, xfer, 2);
+	if (ret == 2)
+		ret = 0;
+	else if (ret >= 0)
+		ret = -EIO;
+
+	return ret;
+}
+
+static int tps6507x_i2c_write_device(struct tps6507x_dev *tps6507x, char reg,
+				   int bytes, void *src)
+{
+	struct i2c_client *i2c = tps6507x->i2c_client;
+	/* we add 1 byte for device register */
+	u8 msg[TPS6507X_MAX_REGISTER + 1];
+	int ret;
+
+	if (bytes > (TPS6507X_MAX_REGISTER + 1))
+		return -EINVAL;
+
+	msg[0] = reg;
+	memcpy(&msg[1], src, bytes);
+
+	ret = i2c_master_send(i2c, msg, bytes + 1);
+	if (ret < 0)
+		return ret;
+	if (ret != bytes + 1)
+		return -EIO;
+	return 0;
+}
+
+static int tps6507x_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
+{
+	struct tps6507x_dev *tps6507x;
+	int ret = 0;
+
+	tps6507x = kzalloc(sizeof(struct tps6507x_dev), GFP_KERNEL);
+	if (tps6507x == NULL) {
+		kfree(i2c);
+		return -ENOMEM;
+	}
+
+	i2c_set_clientdata(i2c, tps6507x);
+	tps6507x->dev = &i2c->dev;
+	tps6507x->i2c_client = i2c;
+	tps6507x->read_dev = tps6507x_i2c_read_device;
+	tps6507x->write_dev = tps6507x_i2c_write_device;
+
+	ret = mfd_add_devices(tps6507x->dev, -1,
+			      tps6507x_devs, ARRAY_SIZE(tps6507x_devs),
+			      NULL, 0);
+
+	if (ret < 0)
+		goto err;
+
+	return ret;
+
+err:
+	mfd_remove_devices(tps6507x->dev);
+	kfree(tps6507x);
+	return ret;
+}
+
+static int tps6507x_i2c_remove(struct i2c_client *i2c)
+{
+	struct tps6507x_dev *tps6507x = i2c_get_clientdata(i2c);
+
+	mfd_remove_devices(tps6507x->dev);
+	kfree(tps6507x);
+
+	return 0;
+}
+
+static const struct i2c_device_id tps6507x_i2c_id[] = {
+       { "tps6507x", 0 },
+       { }
+};
+MODULE_DEVICE_TABLE(i2c, tps6507x_i2c_id);
+
+
+static struct i2c_driver tps6507x_i2c_driver = {
+	.driver = {
+		   .name = "tps6507x",
+		   .owner = THIS_MODULE,
+	},
+	.probe = tps6507x_i2c_probe,
+	.remove = tps6507x_i2c_remove,
+	.id_table = tps6507x_i2c_id,
+};
+
+static int __init tps6507x_i2c_init(void)
+{
+	return i2c_add_driver(&tps6507x_i2c_driver);
+}
+/* init early so consumer devices can complete system boot */
+subsys_initcall(tps6507x_i2c_init);
+
+static void __exit tps6507x_i2c_exit(void)
+{
+	i2c_del_driver(&tps6507x_i2c_driver);
+}
+module_exit(tps6507x_i2c_exit);
+
+MODULE_DESCRIPTION("TPS6507x chip family multi-function driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index 202bdd59632..097f24d8bce 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -232,10 +232,11 @@ static const struct sih sih_modules_twl5031[8] = {
 	},
 	[6] = {
 		/*
-		 * ACI doesn't use the same SIH organization.
-		 * For example, it supports only one interrupt line
+		 * ECI/DBI doesn't use the same SIH organization.
+		 * For example, it supports only one interrupt output line.
+		 * That is, the interrupts are seen on both INT1 and INT2 lines.
 		 */
-		.name		= "aci",
+		.name		= "eci_dbi",
 		.module		= TWL5031_MODULE_ACCESSORY,
 		.bits		= 9,
 		.bytes_ixr	= 2,
@@ -247,8 +248,8 @@ static const struct sih sih_modules_twl5031[8] = {
 
 	},
 	[7] = {
-		/* Accessory */
-		.name		= "acc",
+		/* Audio accessory */
+		.name		= "audio",
 		.module		= TWL5031_MODULE_ACCESSORY,
 		.control_offset	= TWL5031_ACCSIHCTRL,
 		.bits		= 2,
diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
index f2ab025ad97..1a968f34d67 100644
--- a/drivers/mfd/wm831x-core.c
+++ b/drivers/mfd/wm831x-core.c
@@ -322,7 +322,11 @@ EXPORT_SYMBOL_GPL(wm831x_set_bits);
  */
 int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input)
 {
-	int ret, src;
+	int ret, src, irq_masked, timeout;
+
+	/* Are we using the interrupt? */
+	irq_masked = wm831x_reg_read(wm831x, WM831X_INTERRUPT_STATUS_1_MASK);
+	irq_masked &= WM831X_AUXADC_DATA_EINT;
 
 	mutex_lock(&wm831x->auxadc_lock);
 
@@ -342,6 +346,9 @@ int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input)
 		goto out;
 	}
 
+	/* Clear any notification from a very late arriving interrupt */
+	try_wait_for_completion(&wm831x->auxadc_done);
+
 	ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
 			      WM831X_AUX_CVT_ENA, WM831X_AUX_CVT_ENA);
 	if (ret < 0) {
@@ -349,22 +356,46 @@ int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input)
 		goto disable;
 	}
 
-	/* If an interrupt arrived late clean up after it */
-	try_wait_for_completion(&wm831x->auxadc_done);
-
-	/* Ignore the result to allow us to soldier on without IRQ hookup */
-	wait_for_completion_timeout(&wm831x->auxadc_done, msecs_to_jiffies(5));
-
-	ret = wm831x_reg_read(wm831x, WM831X_AUXADC_CONTROL);
-	if (ret < 0) {
-		dev_err(wm831x->dev, "AUXADC status read failed: %d\n", ret);
-		goto disable;
-	}
-
-	if (ret & WM831X_AUX_CVT_ENA) {
-		dev_err(wm831x->dev, "Timed out reading AUXADC\n");
-		ret = -EBUSY;
-		goto disable;
+	if (irq_masked) {
+		/* If we're not using interrupts then poll the
+		 * interrupt status register */
+		timeout = 5;
+		while (timeout) {
+			msleep(1);
+
+			ret = wm831x_reg_read(wm831x,
+					      WM831X_INTERRUPT_STATUS_1);
+			if (ret < 0) {
+				dev_err(wm831x->dev,
+					"ISR 1 read failed: %d\n", ret);
+				goto disable;
+			}
+
+			/* Did it complete? */
+			if (ret & WM831X_AUXADC_DATA_EINT) {
+				wm831x_reg_write(wm831x,
+						 WM831X_INTERRUPT_STATUS_1,
+						 WM831X_AUXADC_DATA_EINT);
+				break;
+			} else {
+				dev_err(wm831x->dev,
+					"AUXADC conversion timeout\n");
+				ret = -EBUSY;
+				goto disable;
+			}
+		}
+	} else {
+		/* If we are using interrupts then wait for the
+		 * interrupt to complete.  Use an extremely long
+		 * timeout to handle situations with heavy load where
+		 * the notification of the interrupt may be delayed by
+		 * threaded IRQ handling. */
+		if (!wait_for_completion_timeout(&wm831x->auxadc_done,
+						 msecs_to_jiffies(500))) {
+			dev_err(wm831x->dev, "Timed out waiting for AUXADC\n");
+			ret = -EBUSY;
+			goto disable;
+		}
 	}
 
 	ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
@@ -1463,6 +1494,7 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 	case WM8310:
 		parent = WM8310;
 		wm831x->num_gpio = 16;
+		wm831x->charger_irq_wake = 1;
 		if (rev > 0) {
 			wm831x->has_gpio_ena = 1;
 			wm831x->has_cs_sts = 1;
@@ -1474,6 +1506,7 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 	case WM8311:
 		parent = WM8311;
 		wm831x->num_gpio = 16;
+		wm831x->charger_irq_wake = 1;
 		if (rev > 0) {
 			wm831x->has_gpio_ena = 1;
 			wm831x->has_cs_sts = 1;
@@ -1485,6 +1518,7 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 	case WM8312:
 		parent = WM8312;
 		wm831x->num_gpio = 16;
+		wm831x->charger_irq_wake = 1;
 		if (rev > 0) {
 			wm831x->has_gpio_ena = 1;
 			wm831x->has_cs_sts = 1;
@@ -1623,6 +1657,42 @@ static void wm831x_device_exit(struct wm831x *wm831x)
 	kfree(wm831x);
 }
 
+static int wm831x_device_suspend(struct wm831x *wm831x)
+{
+	int reg, mask;
+
+	/* If the charger IRQs are a wake source then make sure we ack
+	 * them even if they're not actively being used (eg, no power
+	 * driver or no IRQ line wired up) then acknowledge the
+	 * interrupts otherwise suspend won't last very long.
+	 */
+	if (wm831x->charger_irq_wake) {
+		reg = wm831x_reg_read(wm831x, WM831X_INTERRUPT_STATUS_2_MASK);
+
+		mask = WM831X_CHG_BATT_HOT_EINT |
+			WM831X_CHG_BATT_COLD_EINT |
+			WM831X_CHG_BATT_FAIL_EINT |
+			WM831X_CHG_OV_EINT | WM831X_CHG_END_EINT |
+			WM831X_CHG_TO_EINT | WM831X_CHG_MODE_EINT |
+			WM831X_CHG_START_EINT;
+
+		/* If any of the interrupts are masked read the statuses */
+		if (reg & mask)
+			reg = wm831x_reg_read(wm831x,
+					      WM831X_INTERRUPT_STATUS_2);
+
+		if (reg & mask) {
+			dev_info(wm831x->dev,
+				 "Acknowledging masked charger IRQs: %x\n",
+				 reg & mask);
+			wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_2,
+					 reg & mask);
+		}
+	}
+
+	return 0;
+}
+
 static int wm831x_i2c_read_device(struct wm831x *wm831x, unsigned short reg,
 				  int bytes, void *dest)
 {
@@ -1697,6 +1767,13 @@ static int wm831x_i2c_remove(struct i2c_client *i2c)
 	return 0;
 }
 
+static int wm831x_i2c_suspend(struct i2c_client *i2c, pm_message_t mesg)
+{
+	struct wm831x *wm831x = i2c_get_clientdata(i2c);
+
+	return wm831x_device_suspend(wm831x);
+}
+
 static const struct i2c_device_id wm831x_i2c_id[] = {
 	{ "wm8310", WM8310 },
 	{ "wm8311", WM8311 },
@@ -1714,6 +1791,7 @@ static struct i2c_driver wm831x_i2c_driver = {
 	},
 	.probe = wm831x_i2c_probe,
 	.remove = wm831x_i2c_remove,
+	.suspend = wm831x_i2c_suspend,
 	.id_table = wm831x_i2c_id,
 };
 
diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c
index 4c1122ceb44..7dabe4dbd37 100644
--- a/drivers/mfd/wm831x-irq.c
+++ b/drivers/mfd/wm831x-irq.c
@@ -39,8 +39,6 @@ struct wm831x_irq_data {
 	int primary;
 	int reg;
 	int mask;
-	irq_handler_t handler;
-	void *handler_data;
 };
 
 static struct wm831x_irq_data wm831x_irqs[] = {
@@ -492,6 +490,14 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq)
 
 	mutex_init(&wm831x->irq_lock);
 
+	/* Mask the individual interrupt sources */
+	for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks_cur); i++) {
+		wm831x->irq_masks_cur[i] = 0xffff;
+		wm831x->irq_masks_cache[i] = 0xffff;
+		wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1_MASK + i,
+				 0xffff);
+	}
+
 	if (!irq) {
 		dev_warn(wm831x->dev,
 			 "No interrupt specified - functionality limited\n");
@@ -507,14 +513,6 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq)
 	wm831x->irq = irq;
 	wm831x->irq_base = pdata->irq_base;
 
-	/* Mask the individual interrupt sources */
-	for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks_cur); i++) {
-		wm831x->irq_masks_cur[i] = 0xffff;
-		wm831x->irq_masks_cache[i] = 0xffff;
-		wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1_MASK + i,
-				 0xffff);
-	}
-
 	/* Register them with genirq */
 	for (cur_irq = wm831x->irq_base;
 	     cur_irq < ARRAY_SIZE(wm831x_irqs) + wm831x->irq_base;
diff --git a/drivers/mfd/wm8350-i2c.c b/drivers/mfd/wm8350-i2c.c
index 65830f57c09..7795af4b1fe 100644
--- a/drivers/mfd/wm8350-i2c.c
+++ b/drivers/mfd/wm8350-i2c.c
@@ -64,10 +64,8 @@ static int wm8350_i2c_probe(struct i2c_client *i2c,
 	int ret = 0;
 
 	wm8350 = kzalloc(sizeof(struct wm8350), GFP_KERNEL);
-	if (wm8350 == NULL) {
-		kfree(i2c);
+	if (wm8350 == NULL)
 		return -ENOMEM;
-	}
 
 	i2c_set_clientdata(i2c, wm8350);
 	wm8350->dev = &i2c->dev;
@@ -82,6 +80,7 @@ static int wm8350_i2c_probe(struct i2c_client *i2c,
 	return ret;
 
 err:
+	i2c_set_clientdata(i2c, NULL);
 	kfree(wm8350);
 	return ret;
 }
@@ -91,6 +90,7 @@ static int wm8350_i2c_remove(struct i2c_client *i2c)
 	struct wm8350 *wm8350 = i2c_get_clientdata(i2c);
 
 	wm8350_device_exit(wm8350);
+	i2c_set_clientdata(i2c, NULL);
 	kfree(wm8350);
 
 	return 0;
diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c
index 865ce013a82..e08aafa663d 100644
--- a/drivers/mfd/wm8400-core.c
+++ b/drivers/mfd/wm8400-core.c
@@ -118,7 +118,7 @@ static int wm8400_read(struct wm8400 *wm8400, u8 reg, int num_regs, u16 *dest)
 {
 	int i, ret = 0;
 
-	BUG_ON(reg + num_regs - 1 > ARRAY_SIZE(wm8400->reg_cache));
+	BUG_ON(reg + num_regs > ARRAY_SIZE(wm8400->reg_cache));
 
 	/* If there are any volatile reads then read back the entire block */
 	for (i = reg; i < reg + num_regs; i++)
@@ -144,7 +144,7 @@ static int wm8400_write(struct wm8400 *wm8400, u8 reg, int num_regs,
 {
 	int ret, i;
 
-	BUG_ON(reg + num_regs - 1 > ARRAY_SIZE(wm8400->reg_cache));
+	BUG_ON(reg + num_regs > ARRAY_SIZE(wm8400->reg_cache));
 
 	for (i = 0; i < num_regs; i++) {
 		BUG_ON(!reg_data[reg + i].writable);
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 05b751719bd..2c5227c02fa 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -63,6 +63,16 @@ config CAN_BFIN
 	  To compile this driver as a module, choose M here: the
 	  module will be called bfin_can.
 
+config CAN_JANZ_ICAN3
+	tristate "Janz VMOD-ICAN3 Intelligent CAN controller"
+	depends on CAN_DEV && MFD_JANZ_CMODIO
+	---help---
+	  Driver for Janz VMOD-ICAN3 Intelligent CAN controller module, which
+	  connects to a MODULbus carrier board.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called janz-ican3.ko.
+
 source "drivers/net/can/mscan/Kconfig"
 
 source "drivers/net/can/sja1000/Kconfig"
diff --git a/drivers/net/can/Makefile b/drivers/net/can/Makefile
index 7a702f28d01..9047cd066fe 100644
--- a/drivers/net/can/Makefile
+++ b/drivers/net/can/Makefile
@@ -15,5 +15,6 @@ obj-$(CONFIG_CAN_AT91)		+= at91_can.o
 obj-$(CONFIG_CAN_TI_HECC)	+= ti_hecc.o
 obj-$(CONFIG_CAN_MCP251X)	+= mcp251x.o
 obj-$(CONFIG_CAN_BFIN)		+= bfin_can.o
+obj-$(CONFIG_CAN_JANZ_ICAN3)	+= janz-ican3.o
 
 ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c
new file mode 100644
index 00000000000..6e533dcc36c
--- /dev/null
+++ b/drivers/net/can/janz-ican3.c
@@ -0,0 +1,1830 @@
+/*
+ * Janz MODULbus VMOD-ICAN3 CAN Interface Driver
+ *
+ * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+#include <linux/netdevice.h>
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+
+#include <linux/mfd/janz.h>
+
+/* the DPM has 64k of memory, organized into 256x 256 byte pages */
+#define DPM_NUM_PAGES		256
+#define DPM_PAGE_SIZE		256
+#define DPM_PAGE_ADDR(p)	((p) * DPM_PAGE_SIZE)
+
+/* JANZ ICAN3 "old-style" host interface queue page numbers */
+#define QUEUE_OLD_CONTROL	0
+#define QUEUE_OLD_RB0		1
+#define QUEUE_OLD_RB1		2
+#define QUEUE_OLD_WB0		3
+#define QUEUE_OLD_WB1		4
+
+/* Janz ICAN3 "old-style" host interface control registers */
+#define MSYNC_PEER		0x00		/* ICAN only */
+#define MSYNC_LOCL		0x01		/* host only */
+#define TARGET_RUNNING		0x02
+
+#define MSYNC_RB0		0x01
+#define MSYNC_RB1		0x02
+#define MSYNC_RBLW		0x04
+#define MSYNC_RB_MASK		(MSYNC_RB0 | MSYNC_RB1)
+
+#define MSYNC_WB0		0x10
+#define MSYNC_WB1		0x20
+#define MSYNC_WBLW		0x40
+#define MSYNC_WB_MASK		(MSYNC_WB0 | MSYNC_WB1)
+
+/* Janz ICAN3 "new-style" host interface queue page numbers */
+#define QUEUE_TOHOST		5
+#define QUEUE_FROMHOST_MID	6
+#define QUEUE_FROMHOST_HIGH	7
+#define QUEUE_FROMHOST_LOW	8
+
+/* The first free page in the DPM is #9 */
+#define DPM_FREE_START		9
+
+/* Janz ICAN3 "new-style" and "fast" host interface descriptor flags */
+#define DESC_VALID		0x80
+#define DESC_WRAP		0x40
+#define DESC_INTERRUPT		0x20
+#define DESC_IVALID		0x10
+#define DESC_LEN(len)		(len)
+
+/* Janz ICAN3 Firmware Messages */
+#define MSG_CONNECTI		0x02
+#define MSG_DISCONNECT		0x03
+#define MSG_IDVERS		0x04
+#define MSG_MSGLOST		0x05
+#define MSG_NEWHOSTIF		0x08
+#define MSG_INQUIRY		0x0a
+#define MSG_SETAFILMASK		0x10
+#define MSG_INITFDPMQUEUE	0x11
+#define MSG_HWCONF		0x12
+#define MSG_FMSGLOST		0x15
+#define MSG_CEVTIND		0x37
+#define MSG_CBTRREQ		0x41
+#define MSG_COFFREQ		0x42
+#define MSG_CONREQ		0x43
+#define MSG_CCONFREQ		0x47
+
+/*
+ * Janz ICAN3 CAN Inquiry Message Types
+ *
+ * NOTE: there appears to be a firmware bug here. You must send
+ * NOTE: INQUIRY_STATUS and expect to receive an INQUIRY_EXTENDED
+ * NOTE: response. The controller never responds to a message with
+ * NOTE: the INQUIRY_EXTENDED subspec :(
+ */
+#define INQUIRY_STATUS		0x00
+#define INQUIRY_TERMINATION	0x01
+#define INQUIRY_EXTENDED	0x04
+
+/* Janz ICAN3 CAN Set Acceptance Filter Mask Message Types */
+#define SETAFILMASK_REJECT	0x00
+#define SETAFILMASK_FASTIF	0x02
+
+/* Janz ICAN3 CAN Hardware Configuration Message Types */
+#define HWCONF_TERMINATE_ON	0x01
+#define HWCONF_TERMINATE_OFF	0x00
+
+/* Janz ICAN3 CAN Event Indication Message Types */
+#define CEVTIND_EI		0x01
+#define CEVTIND_DOI		0x02
+#define CEVTIND_LOST		0x04
+#define CEVTIND_FULL		0x08
+#define CEVTIND_BEI		0x10
+
+#define CEVTIND_CHIP_SJA1000	0x02
+
+#define ICAN3_BUSERR_QUOTA_MAX	255
+
+/* Janz ICAN3 CAN Frame Conversion */
+#define ICAN3_ECHO	0x10
+#define ICAN3_EFF_RTR	0x40
+#define ICAN3_SFF_RTR	0x10
+#define ICAN3_EFF	0x80
+
+#define ICAN3_CAN_TYPE_MASK	0x0f
+#define ICAN3_CAN_TYPE_SFF	0x00
+#define ICAN3_CAN_TYPE_EFF	0x01
+
+#define ICAN3_CAN_DLC_MASK	0x0f
+
+/*
+ * SJA1000 Status and Error Register Definitions
+ *
+ * Copied from drivers/net/can/sja1000/sja1000.h
+ */
+
+/* status register content */
+#define SR_BS		0x80
+#define SR_ES		0x40
+#define SR_TS		0x20
+#define SR_RS		0x10
+#define SR_TCS		0x08
+#define SR_TBS		0x04
+#define SR_DOS		0x02
+#define SR_RBS		0x01
+
+#define SR_CRIT (SR_BS|SR_ES)
+
+/* ECC register */
+#define ECC_SEG		0x1F
+#define ECC_DIR		0x20
+#define ECC_ERR		6
+#define ECC_BIT		0x00
+#define ECC_FORM	0x40
+#define ECC_STUFF	0x80
+#define ECC_MASK	0xc0
+
+/* Number of buffers for use in the "new-style" host interface */
+#define ICAN3_NEW_BUFFERS	16
+
+/* Number of buffers for use in the "fast" host interface */
+#define ICAN3_TX_BUFFERS	512
+#define ICAN3_RX_BUFFERS	1024
+
+/* SJA1000 Clock Input */
+#define ICAN3_CAN_CLOCK		8000000
+
+/* Driver Name */
+#define DRV_NAME "janz-ican3"
+
+/* DPM Control Registers -- starts at offset 0x100 in the MODULbus registers */
+struct ican3_dpm_control {
+	/* window address register */
+	u8 window_address;
+	u8 unused1;
+
+	/*
+	 * Read access: clear interrupt from microcontroller
+	 * Write access: send interrupt to microcontroller
+	 */
+	u8 interrupt;
+	u8 unused2;
+
+	/* write-only: reset all hardware on the module */
+	u8 hwreset;
+	u8 unused3;
+
+	/* write-only: generate an interrupt to the TPU */
+	u8 tpuinterrupt;
+};
+
+struct ican3_dev {
+
+	/* must be the first member */
+	struct can_priv can;
+
+	/* CAN network device */
+	struct net_device *ndev;
+	struct napi_struct napi;
+
+	/* Device for printing */
+	struct device *dev;
+
+	/* module number */
+	unsigned int num;
+
+	/* base address of registers and IRQ */
+	struct janz_cmodio_onboard_regs __iomem *ctrl;
+	struct ican3_dpm_control __iomem *dpmctrl;
+	void __iomem *dpm;
+	int irq;
+
+	/* CAN bus termination status */
+	struct completion termination_comp;
+	bool termination_enabled;
+
+	/* CAN bus error status registers */
+	struct completion buserror_comp;
+	struct can_berr_counter bec;
+
+	/* old and new style host interface */
+	unsigned int iftype;
+
+	/*
+	 * Any function which changes the current DPM page must hold this
+	 * lock while it is performing data accesses. This ensures that the
+	 * function will not be preempted and end up reading data from a
+	 * different DPM page than it expects.
+	 */
+	spinlock_t lock;
+
+	/* new host interface */
+	unsigned int rx_int;
+	unsigned int rx_num;
+	unsigned int tx_num;
+
+	/* fast host interface */
+	unsigned int fastrx_start;
+	unsigned int fastrx_int;
+	unsigned int fastrx_num;
+	unsigned int fasttx_start;
+	unsigned int fasttx_num;
+
+	/* first free DPM page */
+	unsigned int free_page;
+};
+
+struct ican3_msg {
+	u8 control;
+	u8 spec;
+	__le16 len;
+	u8 data[252];
+};
+
+struct ican3_new_desc {
+	u8 control;
+	u8 pointer;
+};
+
+struct ican3_fast_desc {
+	u8 control;
+	u8 command;
+	u8 data[14];
+};
+
+/* write to the window basic address register */
+static inline void ican3_set_page(struct ican3_dev *mod, unsigned int page)
+{
+	BUG_ON(page >= DPM_NUM_PAGES);
+	iowrite8(page, &mod->dpmctrl->window_address);
+}
+
+/*
+ * ICAN3 "old-style" host interface
+ */
+
+/*
+ * Recieve a message from the ICAN3 "old-style" firmware interface
+ *
+ * LOCKING: must hold mod->lock
+ *
+ * returns 0 on success, -ENOMEM when no message exists
+ */
+static int ican3_old_recv_msg(struct ican3_dev *mod, struct ican3_msg *msg)
+{
+	unsigned int mbox, mbox_page;
+	u8 locl, peer, xord;
+
+	/* get the MSYNC registers */
+	ican3_set_page(mod, QUEUE_OLD_CONTROL);
+	peer = ioread8(mod->dpm + MSYNC_PEER);
+	locl = ioread8(mod->dpm + MSYNC_LOCL);
+	xord = locl ^ peer;
+
+	if ((xord & MSYNC_RB_MASK) == 0x00) {
+		dev_dbg(mod->dev, "no mbox for reading\n");
+		return -ENOMEM;
+	}
+
+	/* find the first free mbox to read */
+	if ((xord & MSYNC_RB_MASK) == MSYNC_RB_MASK)
+		mbox = (xord & MSYNC_RBLW) ? MSYNC_RB0 : MSYNC_RB1;
+	else
+		mbox = (xord & MSYNC_RB0) ? MSYNC_RB0 : MSYNC_RB1;
+
+	/* copy the message */
+	mbox_page = (mbox == MSYNC_RB0) ? QUEUE_OLD_RB0 : QUEUE_OLD_RB1;
+	ican3_set_page(mod, mbox_page);
+	memcpy_fromio(msg, mod->dpm, sizeof(*msg));
+
+	/*
+	 * notify the firmware that the read buffer is available
+	 * for it to fill again
+	 */
+	locl ^= mbox;
+
+	ican3_set_page(mod, QUEUE_OLD_CONTROL);
+	iowrite8(locl, mod->dpm + MSYNC_LOCL);
+	return 0;
+}
+
+/*
+ * Send a message through the "old-style" firmware interface
+ *
+ * LOCKING: must hold mod->lock
+ *
+ * returns 0 on success, -ENOMEM when no free space exists
+ */
+static int ican3_old_send_msg(struct ican3_dev *mod, struct ican3_msg *msg)
+{
+	unsigned int mbox, mbox_page;
+	u8 locl, peer, xord;
+
+	/* get the MSYNC registers */
+	ican3_set_page(mod, QUEUE_OLD_CONTROL);
+	peer = ioread8(mod->dpm + MSYNC_PEER);
+	locl = ioread8(mod->dpm + MSYNC_LOCL);
+	xord = locl ^ peer;
+
+	if ((xord & MSYNC_WB_MASK) == MSYNC_WB_MASK) {
+		dev_err(mod->dev, "no mbox for writing\n");
+		return -ENOMEM;
+	}
+
+	/* calculate a free mbox to use */
+	mbox = (xord & MSYNC_WB0) ? MSYNC_WB1 : MSYNC_WB0;
+
+	/* copy the message to the DPM */
+	mbox_page = (mbox == MSYNC_WB0) ? QUEUE_OLD_WB0 : QUEUE_OLD_WB1;
+	ican3_set_page(mod, mbox_page);
+	memcpy_toio(mod->dpm, msg, sizeof(*msg));
+
+	locl ^= mbox;
+	if (mbox == MSYNC_WB1)
+		locl |= MSYNC_WBLW;
+
+	ican3_set_page(mod, QUEUE_OLD_CONTROL);
+	iowrite8(locl, mod->dpm + MSYNC_LOCL);
+	return 0;
+}
+
+/*
+ * ICAN3 "new-style" Host Interface Setup
+ */
+
+static void __devinit ican3_init_new_host_interface(struct ican3_dev *mod)
+{
+	struct ican3_new_desc desc;
+	unsigned long flags;
+	void __iomem *dst;
+	int i;
+
+	spin_lock_irqsave(&mod->lock, flags);
+
+	/* setup the internal datastructures for RX */
+	mod->rx_num = 0;
+	mod->rx_int = 0;
+
+	/* tohost queue descriptors are in page 5 */
+	ican3_set_page(mod, QUEUE_TOHOST);
+	dst = mod->dpm;
+
+	/* initialize the tohost (rx) queue descriptors: pages 9-24 */
+	for (i = 0; i < ICAN3_NEW_BUFFERS; i++) {
+		desc.control = DESC_INTERRUPT | DESC_LEN(1); /* I L=1 */
+		desc.pointer = mod->free_page;
+
+		/* set wrap flag on last buffer */
+		if (i == ICAN3_NEW_BUFFERS - 1)
+			desc.control |= DESC_WRAP;
+
+		memcpy_toio(dst, &desc, sizeof(desc));
+		dst += sizeof(desc);
+		mod->free_page++;
+	}
+
+	/* fromhost (tx) mid queue descriptors are in page 6 */
+	ican3_set_page(mod, QUEUE_FROMHOST_MID);
+	dst = mod->dpm;
+
+	/* setup the internal datastructures for TX */
+	mod->tx_num = 0;
+
+	/* initialize the fromhost mid queue descriptors: pages 25-40 */
+	for (i = 0; i < ICAN3_NEW_BUFFERS; i++) {
+		desc.control = DESC_VALID | DESC_LEN(1); /* V L=1 */
+		desc.pointer = mod->free_page;
+
+		/* set wrap flag on last buffer */
+		if (i == ICAN3_NEW_BUFFERS - 1)
+			desc.control |= DESC_WRAP;
+
+		memcpy_toio(dst, &desc, sizeof(desc));
+		dst += sizeof(desc);
+		mod->free_page++;
+	}
+
+	/* fromhost hi queue descriptors are in page 7 */
+	ican3_set_page(mod, QUEUE_FROMHOST_HIGH);
+	dst = mod->dpm;
+
+	/* initialize only a single buffer in the fromhost hi queue (unused) */
+	desc.control = DESC_VALID | DESC_WRAP | DESC_LEN(1); /* VW L=1 */
+	desc.pointer = mod->free_page;
+	memcpy_toio(dst, &desc, sizeof(desc));
+	mod->free_page++;
+
+	/* fromhost low queue descriptors are in page 8 */
+	ican3_set_page(mod, QUEUE_FROMHOST_LOW);
+	dst = mod->dpm;
+
+	/* initialize only a single buffer in the fromhost low queue (unused) */
+	desc.control = DESC_VALID | DESC_WRAP | DESC_LEN(1); /* VW L=1 */
+	desc.pointer = mod->free_page;
+	memcpy_toio(dst, &desc, sizeof(desc));
+	mod->free_page++;
+
+	spin_unlock_irqrestore(&mod->lock, flags);
+}
+
+/*
+ * ICAN3 Fast Host Interface Setup
+ */
+
+static void __devinit ican3_init_fast_host_interface(struct ican3_dev *mod)
+{
+	struct ican3_fast_desc desc;
+	unsigned long flags;
+	unsigned int addr;
+	void __iomem *dst;
+	int i;
+
+	spin_lock_irqsave(&mod->lock, flags);
+
+	/* save the start recv page */
+	mod->fastrx_start = mod->free_page;
+	mod->fastrx_num = 0;
+	mod->fastrx_int = 0;
+
+	/* build a single fast tohost queue descriptor */
+	memset(&desc, 0, sizeof(desc));
+	desc.control = 0x00;
+	desc.command = 1;
+
+	/* build the tohost queue descriptor ring in memory */
+	addr = 0;
+	for (i = 0; i < ICAN3_RX_BUFFERS; i++) {
+
+		/* set the wrap bit on the last buffer */
+		if (i == ICAN3_RX_BUFFERS - 1)
+			desc.control |= DESC_WRAP;
+
+		/* switch to the correct page */
+		ican3_set_page(mod, mod->free_page);
+
+		/* copy the descriptor to the DPM */
+		dst = mod->dpm + addr;
+		memcpy_toio(dst, &desc, sizeof(desc));
+		addr += sizeof(desc);
+
+		/* move to the next page if necessary */
+		if (addr >= DPM_PAGE_SIZE) {
+			addr = 0;
+			mod->free_page++;
+		}
+	}
+
+	/* make sure we page-align the next queue */
+	if (addr != 0)
+		mod->free_page++;
+
+	/* save the start xmit page */
+	mod->fasttx_start = mod->free_page;
+	mod->fasttx_num = 0;
+
+	/* build a single fast fromhost queue descriptor */
+	memset(&desc, 0, sizeof(desc));
+	desc.control = DESC_VALID;
+	desc.command = 1;
+
+	/* build the fromhost queue descriptor ring in memory */
+	addr = 0;
+	for (i = 0; i < ICAN3_TX_BUFFERS; i++) {
+
+		/* set the wrap bit on the last buffer */
+		if (i == ICAN3_TX_BUFFERS - 1)
+			desc.control |= DESC_WRAP;
+
+		/* switch to the correct page */
+		ican3_set_page(mod, mod->free_page);
+
+		/* copy the descriptor to the DPM */
+		dst = mod->dpm + addr;
+		memcpy_toio(dst, &desc, sizeof(desc));
+		addr += sizeof(desc);
+
+		/* move to the next page if necessary */
+		if (addr >= DPM_PAGE_SIZE) {
+			addr = 0;
+			mod->free_page++;
+		}
+	}
+
+	spin_unlock_irqrestore(&mod->lock, flags);
+}
+
+/*
+ * ICAN3 "new-style" Host Interface Message Helpers
+ */
+
+/*
+ * LOCKING: must hold mod->lock
+ */
+static int ican3_new_send_msg(struct ican3_dev *mod, struct ican3_msg *msg)
+{
+	struct ican3_new_desc desc;
+	void __iomem *desc_addr = mod->dpm + (mod->tx_num * sizeof(desc));
+
+	/* switch to the fromhost mid queue, and read the buffer descriptor */
+	ican3_set_page(mod, QUEUE_FROMHOST_MID);
+	memcpy_fromio(&desc, desc_addr, sizeof(desc));
+
+	if (!(desc.control & DESC_VALID)) {
+		dev_dbg(mod->dev, "%s: no free buffers\n", __func__);
+		return -ENOMEM;
+	}
+
+	/* switch to the data page, copy the data */
+	ican3_set_page(mod, desc.pointer);
+	memcpy_toio(mod->dpm, msg, sizeof(*msg));
+
+	/* switch back to the descriptor, set the valid bit, write it back */
+	ican3_set_page(mod, QUEUE_FROMHOST_MID);
+	desc.control ^= DESC_VALID;
+	memcpy_toio(desc_addr, &desc, sizeof(desc));
+
+	/* update the tx number */
+	mod->tx_num = (desc.control & DESC_WRAP) ? 0 : (mod->tx_num + 1);
+	return 0;
+}
+
+/*
+ * LOCKING: must hold mod->lock
+ */
+static int ican3_new_recv_msg(struct ican3_dev *mod, struct ican3_msg *msg)
+{
+	struct ican3_new_desc desc;
+	void __iomem *desc_addr = mod->dpm + (mod->rx_num * sizeof(desc));
+
+	/* switch to the tohost queue, and read the buffer descriptor */
+	ican3_set_page(mod, QUEUE_TOHOST);
+	memcpy_fromio(&desc, desc_addr, sizeof(desc));
+
+	if (!(desc.control & DESC_VALID)) {
+		dev_dbg(mod->dev, "%s: no buffers to recv\n", __func__);
+		return -ENOMEM;
+	}
+
+	/* switch to the data page, copy the data */
+	ican3_set_page(mod, desc.pointer);
+	memcpy_fromio(msg, mod->dpm, sizeof(*msg));
+
+	/* switch back to the descriptor, toggle the valid bit, write it back */
+	ican3_set_page(mod, QUEUE_TOHOST);
+	desc.control ^= DESC_VALID;
+	memcpy_toio(desc_addr, &desc, sizeof(desc));
+
+	/* update the rx number */
+	mod->rx_num = (desc.control & DESC_WRAP) ? 0 : (mod->rx_num + 1);
+	return 0;
+}
+
+/*
+ * Message Send / Recv Helpers
+ */
+
+static int ican3_send_msg(struct ican3_dev *mod, struct ican3_msg *msg)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&mod->lock, flags);
+
+	if (mod->iftype == 0)
+		ret = ican3_old_send_msg(mod, msg);
+	else
+		ret = ican3_new_send_msg(mod, msg);
+
+	spin_unlock_irqrestore(&mod->lock, flags);
+	return ret;
+}
+
+static int ican3_recv_msg(struct ican3_dev *mod, struct ican3_msg *msg)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&mod->lock, flags);
+
+	if (mod->iftype == 0)
+		ret = ican3_old_recv_msg(mod, msg);
+	else
+		ret = ican3_new_recv_msg(mod, msg);
+
+	spin_unlock_irqrestore(&mod->lock, flags);
+	return ret;
+}
+
+/*
+ * Quick Pre-constructed Messages
+ */
+
+static int __devinit ican3_msg_connect(struct ican3_dev *mod)
+{
+	struct ican3_msg msg;
+
+	memset(&msg, 0, sizeof(msg));
+	msg.spec = MSG_CONNECTI;
+	msg.len = cpu_to_le16(0);
+
+	return ican3_send_msg(mod, &msg);
+}
+
+static int __devexit ican3_msg_disconnect(struct ican3_dev *mod)
+{
+	struct ican3_msg msg;
+
+	memset(&msg, 0, sizeof(msg));
+	msg.spec = MSG_DISCONNECT;
+	msg.len = cpu_to_le16(0);
+
+	return ican3_send_msg(mod, &msg);
+}
+
+static int __devinit ican3_msg_newhostif(struct ican3_dev *mod)
+{
+	struct ican3_msg msg;
+	int ret;
+
+	memset(&msg, 0, sizeof(msg));
+	msg.spec = MSG_NEWHOSTIF;
+	msg.len = cpu_to_le16(0);
+
+	/* If we're not using the old interface, switching seems bogus */
+	WARN_ON(mod->iftype != 0);
+
+	ret = ican3_send_msg(mod, &msg);
+	if (ret)
+		return ret;
+
+	/* mark the module as using the new host interface */
+	mod->iftype = 1;
+	return 0;
+}
+
+static int __devinit ican3_msg_fasthostif(struct ican3_dev *mod)
+{
+	struct ican3_msg msg;
+	unsigned int addr;
+
+	memset(&msg, 0, sizeof(msg));
+	msg.spec = MSG_INITFDPMQUEUE;
+	msg.len = cpu_to_le16(8);
+
+	/* write the tohost queue start address */
+	addr = DPM_PAGE_ADDR(mod->fastrx_start);
+	msg.data[0] = addr & 0xff;
+	msg.data[1] = (addr >> 8) & 0xff;
+	msg.data[2] = (addr >> 16) & 0xff;
+	msg.data[3] = (addr >> 24) & 0xff;
+
+	/* write the fromhost queue start address */
+	addr = DPM_PAGE_ADDR(mod->fasttx_start);
+	msg.data[4] = addr & 0xff;
+	msg.data[5] = (addr >> 8) & 0xff;
+	msg.data[6] = (addr >> 16) & 0xff;
+	msg.data[7] = (addr >> 24) & 0xff;
+
+	/* If we're not using the new interface yet, we cannot do this */
+	WARN_ON(mod->iftype != 1);
+
+	return ican3_send_msg(mod, &msg);
+}
+
+/*
+ * Setup the CAN filter to either accept or reject all
+ * messages from the CAN bus.
+ */
+static int __devinit ican3_set_id_filter(struct ican3_dev *mod, bool accept)
+{
+	struct ican3_msg msg;
+	int ret;
+
+	/* Standard Frame Format */
+	memset(&msg, 0, sizeof(msg));
+	msg.spec = MSG_SETAFILMASK;
+	msg.len = cpu_to_le16(5);
+	msg.data[0] = 0x00; /* IDLo LSB */
+	msg.data[1] = 0x00; /* IDLo MSB */
+	msg.data[2] = 0xff; /* IDHi LSB */
+	msg.data[3] = 0x07; /* IDHi MSB */
+
+	/* accept all frames for fast host if, or reject all frames */
+	msg.data[4] = accept ? SETAFILMASK_FASTIF : SETAFILMASK_REJECT;
+
+	ret = ican3_send_msg(mod, &msg);
+	if (ret)
+		return ret;
+
+	/* Extended Frame Format */
+	memset(&msg, 0, sizeof(msg));
+	msg.spec = MSG_SETAFILMASK;
+	msg.len = cpu_to_le16(13);
+	msg.data[0] = 0;    /* MUX = 0 */
+	msg.data[1] = 0x00; /* IDLo LSB */
+	msg.data[2] = 0x00;
+	msg.data[3] = 0x00;
+	msg.data[4] = 0x20; /* IDLo MSB */
+	msg.data[5] = 0xff; /* IDHi LSB */
+	msg.data[6] = 0xff;
+	msg.data[7] = 0xff;
+	msg.data[8] = 0x3f; /* IDHi MSB */
+
+	/* accept all frames for fast host if, or reject all frames */
+	msg.data[9] = accept ? SETAFILMASK_FASTIF : SETAFILMASK_REJECT;
+
+	return ican3_send_msg(mod, &msg);
+}
+
+/*
+ * Bring the CAN bus online or offline
+ */
+static int ican3_set_bus_state(struct ican3_dev *mod, bool on)
+{
+	struct ican3_msg msg;
+
+	memset(&msg, 0, sizeof(msg));
+	msg.spec = on ? MSG_CONREQ : MSG_COFFREQ;
+	msg.len = cpu_to_le16(0);
+
+	return ican3_send_msg(mod, &msg);
+}
+
+static int ican3_set_termination(struct ican3_dev *mod, bool on)
+{
+	struct ican3_msg msg;
+
+	memset(&msg, 0, sizeof(msg));
+	msg.spec = MSG_HWCONF;
+	msg.len = cpu_to_le16(2);
+	msg.data[0] = 0x00;
+	msg.data[1] = on ? HWCONF_TERMINATE_ON : HWCONF_TERMINATE_OFF;
+
+	return ican3_send_msg(mod, &msg);
+}
+
+static int ican3_send_inquiry(struct ican3_dev *mod, u8 subspec)
+{
+	struct ican3_msg msg;
+
+	memset(&msg, 0, sizeof(msg));
+	msg.spec = MSG_INQUIRY;
+	msg.len = cpu_to_le16(2);
+	msg.data[0] = subspec;
+	msg.data[1] = 0x00;
+
+	return ican3_send_msg(mod, &msg);
+}
+
+static int ican3_set_buserror(struct ican3_dev *mod, u8 quota)
+{
+	struct ican3_msg msg;
+
+	memset(&msg, 0, sizeof(msg));
+	msg.spec = MSG_CCONFREQ;
+	msg.len = cpu_to_le16(2);
+	msg.data[0] = 0x00;
+	msg.data[1] = quota;
+
+	return ican3_send_msg(mod, &msg);
+}
+
+/*
+ * ICAN3 to Linux CAN Frame Conversion
+ */
+
+static void ican3_to_can_frame(struct ican3_dev *mod,
+			       struct ican3_fast_desc *desc,
+			       struct can_frame *cf)
+{
+	if ((desc->command & ICAN3_CAN_TYPE_MASK) == ICAN3_CAN_TYPE_SFF) {
+		if (desc->data[1] & ICAN3_SFF_RTR)
+			cf->can_id |= CAN_RTR_FLAG;
+
+		cf->can_id |= desc->data[0] << 3;
+		cf->can_id |= (desc->data[1] & 0xe0) >> 5;
+		cf->can_dlc = desc->data[1] & ICAN3_CAN_DLC_MASK;
+		memcpy(cf->data, &desc->data[2], sizeof(cf->data));
+	} else {
+		cf->can_dlc = desc->data[0] & ICAN3_CAN_DLC_MASK;
+		if (desc->data[0] & ICAN3_EFF_RTR)
+			cf->can_id |= CAN_RTR_FLAG;
+
+		if (desc->data[0] & ICAN3_EFF) {
+			cf->can_id |= CAN_EFF_FLAG;
+			cf->can_id |= desc->data[2] << 21; /* 28-21 */
+			cf->can_id |= desc->data[3] << 13; /* 20-13 */
+			cf->can_id |= desc->data[4] << 5;  /* 12-5  */
+			cf->can_id |= (desc->data[5] & 0xf8) >> 3;
+		} else {
+			cf->can_id |= desc->data[2] << 3;  /* 10-3  */
+			cf->can_id |= desc->data[3] >> 5;  /* 2-0   */
+		}
+
+		memcpy(cf->data, &desc->data[6], sizeof(cf->data));
+	}
+}
+
+static void can_frame_to_ican3(struct ican3_dev *mod,
+			       struct can_frame *cf,
+			       struct ican3_fast_desc *desc)
+{
+	/* clear out any stale data in the descriptor */
+	memset(desc->data, 0, sizeof(desc->data));
+
+	/* we always use the extended format, with the ECHO flag set */
+	desc->command = ICAN3_CAN_TYPE_EFF;
+	desc->data[0] |= cf->can_dlc;
+	desc->data[1] |= ICAN3_ECHO;
+
+	if (cf->can_id & CAN_RTR_FLAG)
+		desc->data[0] |= ICAN3_EFF_RTR;
+
+	/* pack the id into the correct places */
+	if (cf->can_id & CAN_EFF_FLAG) {
+		desc->data[0] |= ICAN3_EFF;
+		desc->data[2] = (cf->can_id & 0x1fe00000) >> 21; /* 28-21 */
+		desc->data[3] = (cf->can_id & 0x001fe000) >> 13; /* 20-13 */
+		desc->data[4] = (cf->can_id & 0x00001fe0) >> 5;  /* 12-5  */
+		desc->data[5] = (cf->can_id & 0x0000001f) << 3;  /* 4-0   */
+	} else {
+		desc->data[2] = (cf->can_id & 0x7F8) >> 3; /* bits 10-3 */
+		desc->data[3] = (cf->can_id & 0x007) << 5; /* bits 2-0  */
+	}
+
+	/* copy the data bits into the descriptor */
+	memcpy(&desc->data[6], cf->data, sizeof(cf->data));
+}
+
+/*
+ * Interrupt Handling
+ */
+
+/*
+ * Handle an ID + Version message response from the firmware. We never generate
+ * this message in production code, but it is very useful when debugging to be
+ * able to display this message.
+ */
+static void ican3_handle_idvers(struct ican3_dev *mod, struct ican3_msg *msg)
+{
+	dev_dbg(mod->dev, "IDVERS response: %s\n", msg->data);
+}
+
+static void ican3_handle_msglost(struct ican3_dev *mod, struct ican3_msg *msg)
+{
+	struct net_device *dev = mod->ndev;
+	struct net_device_stats *stats = &dev->stats;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+
+	/*
+	 * Report that communication messages with the microcontroller firmware
+	 * are being lost. These are never CAN frames, so we do not generate an
+	 * error frame for userspace
+	 */
+	if (msg->spec == MSG_MSGLOST) {
+		dev_err(mod->dev, "lost %d control messages\n", msg->data[0]);
+		return;
+	}
+
+	/*
+	 * Oops, this indicates that we have lost messages in the fast queue,
+	 * which are exclusively CAN messages. Our driver isn't reading CAN
+	 * frames fast enough.
+	 *
+	 * We'll pretend that the SJA1000 told us that it ran out of buffer
+	 * space, because there is not a better message for this.
+	 */
+	skb = alloc_can_err_skb(dev, &cf);
+	if (skb) {
+		cf->can_id |= CAN_ERR_CRTL;
+		cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
+		stats->rx_errors++;
+		stats->rx_bytes += cf->can_dlc;
+		netif_rx(skb);
+	}
+}
+
+/*
+ * Handle CAN Event Indication Messages from the firmware
+ *
+ * The ICAN3 firmware provides the values of some SJA1000 registers when it
+ * generates this message. The code below is largely copied from the
+ * drivers/net/can/sja1000/sja1000.c file, and adapted as necessary
+ */
+static int ican3_handle_cevtind(struct ican3_dev *mod, struct ican3_msg *msg)
+{
+	struct net_device *dev = mod->ndev;
+	struct net_device_stats *stats = &dev->stats;
+	enum can_state state = mod->can.state;
+	u8 status, isrc, rxerr, txerr;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+
+	/* we can only handle the SJA1000 part */
+	if (msg->data[1] != CEVTIND_CHIP_SJA1000) {
+		dev_err(mod->dev, "unable to handle errors on non-SJA1000\n");
+		return -ENODEV;
+	}
+
+	/* check the message length for sanity */
+	if (le16_to_cpu(msg->len) < 6) {
+		dev_err(mod->dev, "error message too short\n");
+		return -EINVAL;
+	}
+
+	skb = alloc_can_err_skb(dev, &cf);
+	if (skb == NULL)
+		return -ENOMEM;
+
+	isrc = msg->data[0];
+	status = msg->data[3];
+	rxerr = msg->data[4];
+	txerr = msg->data[5];
+
+	/* data overrun interrupt */
+	if (isrc == CEVTIND_DOI || isrc == CEVTIND_LOST) {
+		dev_dbg(mod->dev, "data overrun interrupt\n");
+		cf->can_id |= CAN_ERR_CRTL;
+		cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
+		stats->rx_over_errors++;
+		stats->rx_errors++;
+	}
+
+	/* error warning + passive interrupt */
+	if (isrc == CEVTIND_EI) {
+		dev_dbg(mod->dev, "error warning + passive interrupt\n");
+		if (status & SR_BS) {
+			state = CAN_STATE_BUS_OFF;
+			cf->can_id |= CAN_ERR_BUSOFF;
+			can_bus_off(dev);
+		} else if (status & SR_ES) {
+			if (rxerr >= 128 || txerr >= 128)
+				state = CAN_STATE_ERROR_PASSIVE;
+			else
+				state = CAN_STATE_ERROR_WARNING;
+		} else {
+			state = CAN_STATE_ERROR_ACTIVE;
+		}
+	}
+
+	/* bus error interrupt */
+	if (isrc == CEVTIND_BEI) {
+		u8 ecc = msg->data[2];
+
+		dev_dbg(mod->dev, "bus error interrupt\n");
+		mod->can.can_stats.bus_error++;
+		stats->rx_errors++;
+		cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
+
+		switch (ecc & ECC_MASK) {
+		case ECC_BIT:
+			cf->data[2] |= CAN_ERR_PROT_BIT;
+			break;
+		case ECC_FORM:
+			cf->data[2] |= CAN_ERR_PROT_FORM;
+			break;
+		case ECC_STUFF:
+			cf->data[2] |= CAN_ERR_PROT_STUFF;
+			break;
+		default:
+			cf->data[2] |= CAN_ERR_PROT_UNSPEC;
+			cf->data[3] = ecc & ECC_SEG;
+			break;
+		}
+
+		if ((ecc & ECC_DIR) == 0)
+			cf->data[2] |= CAN_ERR_PROT_TX;
+
+		cf->data[6] = txerr;
+		cf->data[7] = rxerr;
+	}
+
+	if (state != mod->can.state && (state == CAN_STATE_ERROR_WARNING ||
+					state == CAN_STATE_ERROR_PASSIVE)) {
+		cf->can_id |= CAN_ERR_CRTL;
+		if (state == CAN_STATE_ERROR_WARNING) {
+			mod->can.can_stats.error_warning++;
+			cf->data[1] = (txerr > rxerr) ?
+				CAN_ERR_CRTL_TX_WARNING :
+				CAN_ERR_CRTL_RX_WARNING;
+		} else {
+			mod->can.can_stats.error_passive++;
+			cf->data[1] = (txerr > rxerr) ?
+				CAN_ERR_CRTL_TX_PASSIVE :
+				CAN_ERR_CRTL_RX_PASSIVE;
+		}
+
+		cf->data[6] = txerr;
+		cf->data[7] = rxerr;
+	}
+
+	mod->can.state = state;
+	stats->rx_errors++;
+	stats->rx_bytes += cf->can_dlc;
+	netif_rx(skb);
+	return 0;
+}
+
+static void ican3_handle_inquiry(struct ican3_dev *mod, struct ican3_msg *msg)
+{
+	switch (msg->data[0]) {
+	case INQUIRY_STATUS:
+	case INQUIRY_EXTENDED:
+		mod->bec.rxerr = msg->data[5];
+		mod->bec.txerr = msg->data[6];
+		complete(&mod->buserror_comp);
+		break;
+	case INQUIRY_TERMINATION:
+		mod->termination_enabled = msg->data[6] & HWCONF_TERMINATE_ON;
+		complete(&mod->termination_comp);
+		break;
+	default:
+		dev_err(mod->dev, "recieved an unknown inquiry response\n");
+		break;
+	}
+}
+
+static void ican3_handle_unknown_message(struct ican3_dev *mod,
+					struct ican3_msg *msg)
+{
+	dev_warn(mod->dev, "recieved unknown message: spec 0x%.2x length %d\n",
+			   msg->spec, le16_to_cpu(msg->len));
+}
+
+/*
+ * Handle a control message from the firmware
+ */
+static void ican3_handle_message(struct ican3_dev *mod, struct ican3_msg *msg)
+{
+	dev_dbg(mod->dev, "%s: modno %d spec 0x%.2x len %d bytes\n", __func__,
+			   mod->num, msg->spec, le16_to_cpu(msg->len));
+
+	switch (msg->spec) {
+	case MSG_IDVERS:
+		ican3_handle_idvers(mod, msg);
+		break;
+	case MSG_MSGLOST:
+	case MSG_FMSGLOST:
+		ican3_handle_msglost(mod, msg);
+		break;
+	case MSG_CEVTIND:
+		ican3_handle_cevtind(mod, msg);
+		break;
+	case MSG_INQUIRY:
+		ican3_handle_inquiry(mod, msg);
+		break;
+	default:
+		ican3_handle_unknown_message(mod, msg);
+		break;
+	}
+}
+
+/*
+ * Check that there is room in the TX ring to transmit another skb
+ *
+ * LOCKING: must hold mod->lock
+ */
+static bool ican3_txok(struct ican3_dev *mod)
+{
+	struct ican3_fast_desc __iomem *desc;
+	u8 control;
+
+	/* copy the control bits of the descriptor */
+	ican3_set_page(mod, mod->fasttx_start + (mod->fasttx_num / 16));
+	desc = mod->dpm + ((mod->fasttx_num % 16) * sizeof(*desc));
+	control = ioread8(&desc->control);
+
+	/* if the control bits are not valid, then we have no more space */
+	if (!(control & DESC_VALID))
+		return false;
+
+	return true;
+}
+
+/*
+ * Recieve one CAN frame from the hardware
+ *
+ * This works like the core of a NAPI function, but is intended to be called
+ * from workqueue context instead. This driver already needs a workqueue to
+ * process control messages, so we use the workqueue instead of using NAPI.
+ * This was done to simplify locking.
+ *
+ * CONTEXT: must be called from user context
+ */
+static int ican3_recv_skb(struct ican3_dev *mod)
+{
+	struct net_device *ndev = mod->ndev;
+	struct net_device_stats *stats = &ndev->stats;
+	struct ican3_fast_desc desc;
+	void __iomem *desc_addr;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mod->lock, flags);
+
+	/* copy the whole descriptor */
+	ican3_set_page(mod, mod->fastrx_start + (mod->fastrx_num / 16));
+	desc_addr = mod->dpm + ((mod->fastrx_num % 16) * sizeof(desc));
+	memcpy_fromio(&desc, desc_addr, sizeof(desc));
+
+	spin_unlock_irqrestore(&mod->lock, flags);
+
+	/* check that we actually have a CAN frame */
+	if (!(desc.control & DESC_VALID))
+		return -ENOBUFS;
+
+	/* allocate an skb */
+	skb = alloc_can_skb(ndev, &cf);
+	if (unlikely(skb == NULL)) {
+		stats->rx_dropped++;
+		goto err_noalloc;
+	}
+
+	/* convert the ICAN3 frame into Linux CAN format */
+	ican3_to_can_frame(mod, &desc, cf);
+
+	/* receive the skb, update statistics */
+	netif_receive_skb(skb);
+	stats->rx_packets++;
+	stats->rx_bytes += cf->can_dlc;
+
+err_noalloc:
+	/* toggle the valid bit and return the descriptor to the ring */
+	desc.control ^= DESC_VALID;
+
+	spin_lock_irqsave(&mod->lock, flags);
+
+	ican3_set_page(mod, mod->fastrx_start + (mod->fastrx_num / 16));
+	memcpy_toio(desc_addr, &desc, 1);
+
+	/* update the next buffer pointer */
+	mod->fastrx_num = (desc.control & DESC_WRAP) ? 0
+						     : (mod->fastrx_num + 1);
+
+	/* there are still more buffers to process */
+	spin_unlock_irqrestore(&mod->lock, flags);
+	return 0;
+}
+
+static int ican3_napi(struct napi_struct *napi, int budget)
+{
+	struct ican3_dev *mod = container_of(napi, struct ican3_dev, napi);
+	struct ican3_msg msg;
+	unsigned long flags;
+	int received = 0;
+	int ret;
+
+	/* process all communication messages */
+	while (true) {
+		ret = ican3_recv_msg(mod, &msg);
+		if (ret)
+			break;
+
+		ican3_handle_message(mod, &msg);
+	}
+
+	/* process all CAN frames from the fast interface */
+	while (received < budget) {
+		ret = ican3_recv_skb(mod);
+		if (ret)
+			break;
+
+		received++;
+	}
+
+	/* We have processed all packets that the adapter had, but it
+	 * was less than our budget, stop polling */
+	if (received < budget)
+		napi_complete(napi);
+
+	spin_lock_irqsave(&mod->lock, flags);
+
+	/* Wake up the transmit queue if necessary */
+	if (netif_queue_stopped(mod->ndev) && ican3_txok(mod))
+		netif_wake_queue(mod->ndev);
+
+	spin_unlock_irqrestore(&mod->lock, flags);
+
+	/* re-enable interrupt generation */
+	iowrite8(1 << mod->num, &mod->ctrl->int_enable);
+	return received;
+}
+
+static irqreturn_t ican3_irq(int irq, void *dev_id)
+{
+	struct ican3_dev *mod = dev_id;
+	u8 stat;
+
+	/*
+	 * The interrupt status register on this device reports interrupts
+	 * as zeroes instead of using ones like most other devices
+	 */
+	stat = ioread8(&mod->ctrl->int_disable) & (1 << mod->num);
+	if (stat == (1 << mod->num))
+		return IRQ_NONE;
+
+	/* clear the MODULbus interrupt from the microcontroller */
+	ioread8(&mod->dpmctrl->interrupt);
+
+	/* disable interrupt generation, schedule the NAPI poller */
+	iowrite8(1 << mod->num, &mod->ctrl->int_disable);
+	napi_schedule(&mod->napi);
+	return IRQ_HANDLED;
+}
+
+/*
+ * Firmware reset, startup, and shutdown
+ */
+
+/*
+ * Reset an ICAN module to its power-on state
+ *
+ * CONTEXT: no network device registered
+ * LOCKING: work function disabled
+ */
+static int ican3_reset_module(struct ican3_dev *mod)
+{
+	u8 val = 1 << mod->num;
+	unsigned long start;
+	u8 runold, runnew;
+
+	/* disable interrupts so no more work is scheduled */
+	iowrite8(1 << mod->num, &mod->ctrl->int_disable);
+
+	/* flush any pending work */
+	flush_scheduled_work();
+
+	/* the first unallocated page in the DPM is #9 */
+	mod->free_page = DPM_FREE_START;
+
+	ican3_set_page(mod, QUEUE_OLD_CONTROL);
+	runold = ioread8(mod->dpm + TARGET_RUNNING);
+
+	/* reset the module */
+	iowrite8(val, &mod->ctrl->reset_assert);
+	iowrite8(val, &mod->ctrl->reset_deassert);
+
+	/* wait until the module has finished resetting and is running */
+	start = jiffies;
+	do {
+		ican3_set_page(mod, QUEUE_OLD_CONTROL);
+		runnew = ioread8(mod->dpm + TARGET_RUNNING);
+		if (runnew == (runold ^ 0xff))
+			return 0;
+
+		msleep(10);
+	} while (time_before(jiffies, start + HZ / 4));
+
+	dev_err(mod->dev, "failed to reset CAN module\n");
+	return -ETIMEDOUT;
+}
+
+static void __devexit ican3_shutdown_module(struct ican3_dev *mod)
+{
+	ican3_msg_disconnect(mod);
+	ican3_reset_module(mod);
+}
+
+/*
+ * Startup an ICAN module, bringing it into fast mode
+ */
+static int __devinit ican3_startup_module(struct ican3_dev *mod)
+{
+	int ret;
+
+	ret = ican3_reset_module(mod);
+	if (ret) {
+		dev_err(mod->dev, "unable to reset module\n");
+		return ret;
+	}
+
+	/* re-enable interrupts so we can send messages */
+	iowrite8(1 << mod->num, &mod->ctrl->int_enable);
+
+	ret = ican3_msg_connect(mod);
+	if (ret) {
+		dev_err(mod->dev, "unable to connect to module\n");
+		return ret;
+	}
+
+	ican3_init_new_host_interface(mod);
+	ret = ican3_msg_newhostif(mod);
+	if (ret) {
+		dev_err(mod->dev, "unable to switch to new-style interface\n");
+		return ret;
+	}
+
+	/* default to "termination on" */
+	ret = ican3_set_termination(mod, true);
+	if (ret) {
+		dev_err(mod->dev, "unable to enable termination\n");
+		return ret;
+	}
+
+	/* default to "bus errors enabled" */
+	ret = ican3_set_buserror(mod, ICAN3_BUSERR_QUOTA_MAX);
+	if (ret) {
+		dev_err(mod->dev, "unable to set bus-error\n");
+		return ret;
+	}
+
+	ican3_init_fast_host_interface(mod);
+	ret = ican3_msg_fasthostif(mod);
+	if (ret) {
+		dev_err(mod->dev, "unable to switch to fast host interface\n");
+		return ret;
+	}
+
+	ret = ican3_set_id_filter(mod, true);
+	if (ret) {
+		dev_err(mod->dev, "unable to set acceptance filter\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * CAN Network Device
+ */
+
+static int ican3_open(struct net_device *ndev)
+{
+	struct ican3_dev *mod = netdev_priv(ndev);
+	u8 quota;
+	int ret;
+
+	/* open the CAN layer */
+	ret = open_candev(ndev);
+	if (ret) {
+		dev_err(mod->dev, "unable to start CAN layer\n");
+		return ret;
+	}
+
+	/* set the bus error generation state appropriately */
+	if (mod->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
+		quota = ICAN3_BUSERR_QUOTA_MAX;
+	else
+		quota = 0;
+
+	ret = ican3_set_buserror(mod, quota);
+	if (ret) {
+		dev_err(mod->dev, "unable to set bus-error\n");
+		close_candev(ndev);
+		return ret;
+	}
+
+	/* bring the bus online */
+	ret = ican3_set_bus_state(mod, true);
+	if (ret) {
+		dev_err(mod->dev, "unable to set bus-on\n");
+		close_candev(ndev);
+		return ret;
+	}
+
+	/* start up the network device */
+	mod->can.state = CAN_STATE_ERROR_ACTIVE;
+	netif_start_queue(ndev);
+
+	return 0;
+}
+
+static int ican3_stop(struct net_device *ndev)
+{
+	struct ican3_dev *mod = netdev_priv(ndev);
+	int ret;
+
+	/* stop the network device xmit routine */
+	netif_stop_queue(ndev);
+	mod->can.state = CAN_STATE_STOPPED;
+
+	/* bring the bus offline, stop receiving packets */
+	ret = ican3_set_bus_state(mod, false);
+	if (ret) {
+		dev_err(mod->dev, "unable to set bus-off\n");
+		return ret;
+	}
+
+	/* close the CAN layer */
+	close_candev(ndev);
+	return 0;
+}
+
+static int ican3_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+	struct ican3_dev *mod = netdev_priv(ndev);
+	struct net_device_stats *stats = &ndev->stats;
+	struct can_frame *cf = (struct can_frame *)skb->data;
+	struct ican3_fast_desc desc;
+	void __iomem *desc_addr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mod->lock, flags);
+
+	/* check that we can actually transmit */
+	if (!ican3_txok(mod)) {
+		dev_err(mod->dev, "no free descriptors, stopping queue\n");
+		netif_stop_queue(ndev);
+		spin_unlock_irqrestore(&mod->lock, flags);
+		return NETDEV_TX_BUSY;
+	}
+
+	/* copy the control bits of the descriptor */
+	ican3_set_page(mod, mod->fasttx_start + (mod->fasttx_num / 16));
+	desc_addr = mod->dpm + ((mod->fasttx_num % 16) * sizeof(desc));
+	memset(&desc, 0, sizeof(desc));
+	memcpy_fromio(&desc, desc_addr, 1);
+
+	/* convert the Linux CAN frame into ICAN3 format */
+	can_frame_to_ican3(mod, cf, &desc);
+
+	/*
+	 * the programming manual says that you must set the IVALID bit, then
+	 * interrupt, then set the valid bit. Quite weird, but it seems to be
+	 * required for this to work
+	 */
+	desc.control |= DESC_IVALID;
+	memcpy_toio(desc_addr, &desc, sizeof(desc));
+
+	/* generate a MODULbus interrupt to the microcontroller */
+	iowrite8(0x01, &mod->dpmctrl->interrupt);
+
+	desc.control ^= DESC_VALID;
+	memcpy_toio(desc_addr, &desc, sizeof(desc));
+
+	/* update the next buffer pointer */
+	mod->fasttx_num = (desc.control & DESC_WRAP) ? 0
+						     : (mod->fasttx_num + 1);
+
+	/* update statistics */
+	stats->tx_packets++;
+	stats->tx_bytes += cf->can_dlc;
+	kfree_skb(skb);
+
+	/*
+	 * This hardware doesn't have TX-done notifications, so we'll try and
+	 * emulate it the best we can using ECHO skbs. Get the next TX
+	 * descriptor, and see if we have room to send. If not, stop the queue.
+	 * It will be woken when the ECHO skb for the current packet is recv'd.
+	 */
+
+	/* copy the control bits of the descriptor */
+	if (!ican3_txok(mod))
+		netif_stop_queue(ndev);
+
+	spin_unlock_irqrestore(&mod->lock, flags);
+	return NETDEV_TX_OK;
+}
+
+static const struct net_device_ops ican3_netdev_ops = {
+	.ndo_open	= ican3_open,
+	.ndo_stop	= ican3_stop,
+	.ndo_start_xmit	= ican3_xmit,
+};
+
+/*
+ * Low-level CAN Device
+ */
+
+/* This structure was stolen from drivers/net/can/sja1000/sja1000.c */
+static struct can_bittiming_const ican3_bittiming_const = {
+	.name = DRV_NAME,
+	.tseg1_min = 1,
+	.tseg1_max = 16,
+	.tseg2_min = 1,
+	.tseg2_max = 8,
+	.sjw_max = 4,
+	.brp_min = 1,
+	.brp_max = 64,
+	.brp_inc = 1,
+};
+
+/*
+ * This routine was stolen from drivers/net/can/sja1000/sja1000.c
+ *
+ * The bittiming register command for the ICAN3 just sets the bit timing
+ * registers on the SJA1000 chip directly
+ */
+static int ican3_set_bittiming(struct net_device *ndev)
+{
+	struct ican3_dev *mod = netdev_priv(ndev);
+	struct can_bittiming *bt = &mod->can.bittiming;
+	struct ican3_msg msg;
+	u8 btr0, btr1;
+
+	btr0 = ((bt->brp - 1) & 0x3f) | (((bt->sjw - 1) & 0x3) << 6);
+	btr1 = ((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) |
+		(((bt->phase_seg2 - 1) & 0x7) << 4);
+	if (mod->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
+		btr1 |= 0x80;
+
+	memset(&msg, 0, sizeof(msg));
+	msg.spec = MSG_CBTRREQ;
+	msg.len = cpu_to_le16(4);
+	msg.data[0] = 0x00;
+	msg.data[1] = 0x00;
+	msg.data[2] = btr0;
+	msg.data[3] = btr1;
+
+	return ican3_send_msg(mod, &msg);
+}
+
+static int ican3_set_mode(struct net_device *ndev, enum can_mode mode)
+{
+	struct ican3_dev *mod = netdev_priv(ndev);
+	int ret;
+
+	if (mode != CAN_MODE_START)
+		return -ENOTSUPP;
+
+	/* bring the bus online */
+	ret = ican3_set_bus_state(mod, true);
+	if (ret) {
+		dev_err(mod->dev, "unable to set bus-on\n");
+		return ret;
+	}
+
+	/* start up the network device */
+	mod->can.state = CAN_STATE_ERROR_ACTIVE;
+
+	if (netif_queue_stopped(ndev))
+		netif_wake_queue(ndev);
+
+	return 0;
+}
+
+static int ican3_get_berr_counter(const struct net_device *ndev,
+				  struct can_berr_counter *bec)
+{
+	struct ican3_dev *mod = netdev_priv(ndev);
+	int ret;
+
+	ret = ican3_send_inquiry(mod, INQUIRY_STATUS);
+	if (ret)
+		return ret;
+
+	ret = wait_for_completion_timeout(&mod->buserror_comp, HZ);
+	if (ret <= 0) {
+		dev_info(mod->dev, "%s timed out\n", __func__);
+		return -ETIMEDOUT;
+	}
+
+	bec->rxerr = mod->bec.rxerr;
+	bec->txerr = mod->bec.txerr;
+	return 0;
+}
+
+/*
+ * Sysfs Attributes
+ */
+
+static ssize_t ican3_sysfs_show_term(struct device *dev,
+				     struct device_attribute *attr,
+				     char *buf)
+{
+	struct ican3_dev *mod = netdev_priv(to_net_dev(dev));
+	int ret;
+
+	ret = ican3_send_inquiry(mod, INQUIRY_TERMINATION);
+	if (ret)
+		return ret;
+
+	ret = wait_for_completion_timeout(&mod->termination_comp, HZ);
+	if (ret <= 0) {
+		dev_info(mod->dev, "%s timed out\n", __func__);
+		return -ETIMEDOUT;
+	}
+
+	return snprintf(buf, PAGE_SIZE, "%u\n", mod->termination_enabled);
+}
+
+static ssize_t ican3_sysfs_set_term(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	struct ican3_dev *mod = netdev_priv(to_net_dev(dev));
+	unsigned long enable;
+	int ret;
+
+	if (strict_strtoul(buf, 0, &enable))
+		return -EINVAL;
+
+	ret = ican3_set_termination(mod, enable);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR(termination, S_IWUGO | S_IRUGO, ican3_sysfs_show_term,
+						   ican3_sysfs_set_term);
+
+static struct attribute *ican3_sysfs_attrs[] = {
+	&dev_attr_termination.attr,
+	NULL,
+};
+
+static struct attribute_group ican3_sysfs_attr_group = {
+	.attrs = ican3_sysfs_attrs,
+};
+
+/*
+ * PCI Subsystem
+ */
+
+static int __devinit ican3_probe(struct platform_device *pdev)
+{
+	struct janz_platform_data *pdata;
+	struct net_device *ndev;
+	struct ican3_dev *mod;
+	struct resource *res;
+	struct device *dev;
+	int ret;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata)
+		return -ENXIO;
+
+	dev_dbg(&pdev->dev, "probe: module number %d\n", pdata->modno);
+
+	/* save the struct device for printing */
+	dev = &pdev->dev;
+
+	/* allocate the CAN device and private data */
+	ndev = alloc_candev(sizeof(*mod), 0);
+	if (!ndev) {
+		dev_err(dev, "unable to allocate CANdev\n");
+		ret = -ENOMEM;
+		goto out_return;
+	}
+
+	platform_set_drvdata(pdev, ndev);
+	mod = netdev_priv(ndev);
+	mod->ndev = ndev;
+	mod->dev = &pdev->dev;
+	mod->num = pdata->modno;
+	netif_napi_add(ndev, &mod->napi, ican3_napi, ICAN3_RX_BUFFERS);
+	spin_lock_init(&mod->lock);
+	init_completion(&mod->termination_comp);
+	init_completion(&mod->buserror_comp);
+
+	/* setup device-specific sysfs attributes */
+	ndev->sysfs_groups[0] = &ican3_sysfs_attr_group;
+
+	/* the first unallocated page in the DPM is 9 */
+	mod->free_page = DPM_FREE_START;
+
+	ndev->netdev_ops = &ican3_netdev_ops;
+	ndev->flags |= IFF_ECHO;
+	SET_NETDEV_DEV(ndev, &pdev->dev);
+
+	mod->can.clock.freq = ICAN3_CAN_CLOCK;
+	mod->can.bittiming_const = &ican3_bittiming_const;
+	mod->can.do_set_bittiming = ican3_set_bittiming;
+	mod->can.do_set_mode = ican3_set_mode;
+	mod->can.do_get_berr_counter = ican3_get_berr_counter;
+	mod->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES
+				    | CAN_CTRLMODE_BERR_REPORTING;
+
+	/* find our IRQ number */
+	mod->irq = platform_get_irq(pdev, 0);
+	if (mod->irq < 0) {
+		dev_err(dev, "IRQ line not found\n");
+		ret = -ENODEV;
+		goto out_free_ndev;
+	}
+
+	ndev->irq = mod->irq;
+
+	/* get access to the MODULbus registers for this module */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "MODULbus registers not found\n");
+		ret = -ENODEV;
+		goto out_free_ndev;
+	}
+
+	mod->dpm = ioremap(res->start, resource_size(res));
+	if (!mod->dpm) {
+		dev_err(dev, "MODULbus registers not ioremap\n");
+		ret = -ENOMEM;
+		goto out_free_ndev;
+	}
+
+	mod->dpmctrl = mod->dpm + DPM_PAGE_SIZE;
+
+	/* get access to the control registers for this module */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
+		dev_err(dev, "CONTROL registers not found\n");
+		ret = -ENODEV;
+		goto out_iounmap_dpm;
+	}
+
+	mod->ctrl = ioremap(res->start, resource_size(res));
+	if (!mod->ctrl) {
+		dev_err(dev, "CONTROL registers not ioremap\n");
+		ret = -ENOMEM;
+		goto out_iounmap_dpm;
+	}
+
+	/* disable our IRQ, then hookup the IRQ handler */
+	iowrite8(1 << mod->num, &mod->ctrl->int_disable);
+	ret = request_irq(mod->irq, ican3_irq, IRQF_SHARED, DRV_NAME, mod);
+	if (ret) {
+		dev_err(dev, "unable to request IRQ\n");
+		goto out_iounmap_ctrl;
+	}
+
+	/* reset and initialize the CAN controller into fast mode */
+	napi_enable(&mod->napi);
+	ret = ican3_startup_module(mod);
+	if (ret) {
+		dev_err(dev, "%s: unable to start CANdev\n", __func__);
+		goto out_free_irq;
+	}
+
+	/* register with the Linux CAN layer */
+	ret = register_candev(ndev);
+	if (ret) {
+		dev_err(dev, "%s: unable to register CANdev\n", __func__);
+		goto out_free_irq;
+	}
+
+	dev_info(dev, "module %d: registered CAN device\n", pdata->modno);
+	return 0;
+
+out_free_irq:
+	napi_disable(&mod->napi);
+	iowrite8(1 << mod->num, &mod->ctrl->int_disable);
+	free_irq(mod->irq, mod);
+out_iounmap_ctrl:
+	iounmap(mod->ctrl);
+out_iounmap_dpm:
+	iounmap(mod->dpm);
+out_free_ndev:
+	free_candev(ndev);
+out_return:
+	return ret;
+}
+
+static int __devexit ican3_remove(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct ican3_dev *mod = netdev_priv(ndev);
+
+	/* unregister the netdevice, stop interrupts */
+	unregister_netdev(ndev);
+	napi_disable(&mod->napi);
+	iowrite8(1 << mod->num, &mod->ctrl->int_disable);
+	free_irq(mod->irq, mod);
+
+	/* put the module into reset */
+	ican3_shutdown_module(mod);
+
+	/* unmap all registers */
+	iounmap(mod->ctrl);
+	iounmap(mod->dpm);
+
+	free_candev(ndev);
+
+	return 0;
+}
+
+static struct platform_driver ican3_driver = {
+	.driver		= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ican3_probe,
+	.remove		= __devexit_p(ican3_remove),
+};
+
+static int __init ican3_init(void)
+{
+	return platform_driver_register(&ican3_driver);
+}
+
+static void __exit ican3_exit(void)
+{
+	platform_driver_unregister(&ican3_driver);
+}
+
+MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
+MODULE_DESCRIPTION("Janz MODULbus VMOD-ICAN3 Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:janz-ican3");
+
+module_init(ican3_init);
+module_exit(ican3_exit);
diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c
index 1afd008ca95..7b14a67bdca 100644
--- a/drivers/regulator/ab3100.c
+++ b/drivers/regulator/ab3100.c
@@ -16,7 +16,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
-#include <linux/mfd/ab3100.h>
+#include <linux/mfd/abx500.h>
 
 /* LDO registers and some handy masking definitions for AB3100 */
 #define AB3100_LDO_A		0x40
@@ -41,7 +41,7 @@
  * struct ab3100_regulator
  * A struct passed around the individual regulator functions
  * @platform_device: platform device holding this regulator
- * @ab3100: handle to the AB3100 parent chip
+ * @dev: handle to the device
  * @plfdata: AB3100 platform data passed in at probe time
  * @regreg: regulator register number in the AB3100
  * @fixed_voltage: a fixed voltage for this regulator, if this
@@ -52,7 +52,7 @@
  */
 struct ab3100_regulator {
 	struct regulator_dev *rdev;
-	struct ab3100 *ab3100;
+	struct device *dev;
 	struct ab3100_platform_data *plfdata;
 	u8 regreg;
 	int fixed_voltage;
@@ -183,7 +183,7 @@ static int ab3100_enable_regulator(struct regulator_dev *reg)
 	int err;
 	u8 regval;
 
-	err = ab3100_get_register_interruptible(abreg->ab3100, abreg->regreg,
+	err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg,
 						&regval);
 	if (err) {
 		dev_warn(&reg->dev, "failed to get regid %d value\n",
@@ -197,7 +197,7 @@ static int ab3100_enable_regulator(struct regulator_dev *reg)
 
 	regval |= AB3100_REG_ON_MASK;
 
-	err = ab3100_set_register_interruptible(abreg->ab3100, abreg->regreg,
+	err = abx500_set_register_interruptible(abreg->dev, 0, abreg->regreg,
 						regval);
 	if (err) {
 		dev_warn(&reg->dev, "failed to set regid %d value\n",
@@ -245,14 +245,14 @@ static int ab3100_disable_regulator(struct regulator_dev *reg)
 	if (abreg->regreg == AB3100_LDO_D) {
 		dev_info(&reg->dev, "disabling LDO D - shut down system\n");
 		/* Setting LDO D to 0x00 cuts the power to the SoC */
-		return ab3100_set_register_interruptible(abreg->ab3100,
+		return abx500_set_register_interruptible(abreg->dev, 0,
 							 AB3100_LDO_D, 0x00U);
 	}
 
 	/*
 	 * All other regulators are handled here
 	 */
-	err = ab3100_get_register_interruptible(abreg->ab3100, abreg->regreg,
+	err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg,
 						&regval);
 	if (err) {
 		dev_err(&reg->dev, "unable to get register 0x%x\n",
@@ -260,7 +260,7 @@ static int ab3100_disable_regulator(struct regulator_dev *reg)
 		return err;
 	}
 	regval &= ~AB3100_REG_ON_MASK;
-	return ab3100_set_register_interruptible(abreg->ab3100, abreg->regreg,
+	return abx500_set_register_interruptible(abreg->dev, 0, abreg->regreg,
 						 regval);
 }
 
@@ -270,7 +270,7 @@ static int ab3100_is_enabled_regulator(struct regulator_dev *reg)
 	u8 regval;
 	int err;
 
-	err = ab3100_get_register_interruptible(abreg->ab3100, abreg->regreg,
+	err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg,
 						&regval);
 	if (err) {
 		dev_err(&reg->dev, "unable to get register 0x%x\n",
@@ -305,7 +305,7 @@ static int ab3100_get_voltage_regulator(struct regulator_dev *reg)
 	 * For variable types, read out setting and index into
 	 * supplied voltage list.
 	 */
-	err = ab3100_get_register_interruptible(abreg->ab3100,
+	err = abx500_get_register_interruptible(abreg->dev, 0,
 						abreg->regreg, &regval);
 	if (err) {
 		dev_warn(&reg->dev,
@@ -373,7 +373,7 @@ static int ab3100_set_voltage_regulator(struct regulator_dev *reg,
 	if (bestindex < 0)
 		return bestindex;
 
-	err = ab3100_get_register_interruptible(abreg->ab3100,
+	err = abx500_get_register_interruptible(abreg->dev, 0,
 						abreg->regreg, &regval);
 	if (err) {
 		dev_warn(&reg->dev,
@@ -386,7 +386,7 @@ static int ab3100_set_voltage_regulator(struct regulator_dev *reg,
 	regval &= ~0xE0;
 	regval |= (bestindex << 5);
 
-	err = ab3100_set_register_interruptible(abreg->ab3100,
+	err = abx500_set_register_interruptible(abreg->dev, 0,
 						abreg->regreg, regval);
 	if (err)
 		dev_warn(&reg->dev, "failed to set regulator register %02x\n",
@@ -414,7 +414,7 @@ static int ab3100_set_suspend_voltage_regulator(struct regulator_dev *reg,
 	/* LDO E and BUCK have special suspend voltages you can set */
 	bestindex = ab3100_get_best_voltage_index(reg, uV, uV);
 
-	err = ab3100_get_register_interruptible(abreg->ab3100,
+	err = abx500_get_register_interruptible(abreg->dev, 0,
 						targetreg, &regval);
 	if (err) {
 		dev_warn(&reg->dev,
@@ -427,7 +427,7 @@ static int ab3100_set_suspend_voltage_regulator(struct regulator_dev *reg,
 	regval &= ~0xE0;
 	regval |= (bestindex << 5);
 
-	err = ab3100_set_register_interruptible(abreg->ab3100,
+	err = abx500_set_register_interruptible(abreg->dev, 0,
 						targetreg, regval);
 	if (err)
 		dev_warn(&reg->dev, "failed to set regulator register %02x\n",
@@ -574,13 +574,12 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
 static int __devinit ab3100_regulators_probe(struct platform_device *pdev)
 {
 	struct ab3100_platform_data *plfdata = pdev->dev.platform_data;
-	struct ab3100 *ab3100 = platform_get_drvdata(pdev);
 	int err = 0;
 	u8 data;
 	int i;
 
 	/* Check chip state */
-	err = ab3100_get_register_interruptible(ab3100,
+	err = abx500_get_register_interruptible(&pdev->dev, 0,
 						AB3100_LDO_D, &data);
 	if (err) {
 		dev_err(&pdev->dev, "could not read initial status of LDO_D\n");
@@ -595,7 +594,7 @@ static int __devinit ab3100_regulators_probe(struct platform_device *pdev)
 
 	/* Set up regulators */
 	for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) {
-		err = ab3100_set_register_interruptible(ab3100,
+		err = abx500_set_register_interruptible(&pdev->dev, 0,
 					ab3100_reg_init_order[i],
 					plfdata->reg_initvals[i]);
 		if (err) {
@@ -617,7 +616,7 @@ static int __devinit ab3100_regulators_probe(struct platform_device *pdev)
 		 * see what it looks like for a certain machine, go
 		 * into the machine I2C setup.
 		 */
-		reg->ab3100 = ab3100;
+		reg->dev = &pdev->dev;
 		reg->plfdata = plfdata;
 
 		/*
diff --git a/drivers/regulator/tps6507x-regulator.c b/drivers/regulator/tps6507x-regulator.c
index 74841abcc9c..14b4576281c 100644
--- a/drivers/regulator/tps6507x-regulator.c
+++ b/drivers/regulator/tps6507x-regulator.c
@@ -22,68 +22,9 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
-#include <linux/i2c.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
-
-/* Register definitions */
-#define	TPS6507X_REG_PPATH1				0X01
-#define	TPS6507X_REG_INT				0X02
-#define	TPS6507X_REG_CHGCONFIG0				0X03
-#define	TPS6507X_REG_CHGCONFIG1				0X04
-#define	TPS6507X_REG_CHGCONFIG2				0X05
-#define	TPS6507X_REG_CHGCONFIG3				0X06
-#define	TPS6507X_REG_REG_ADCONFIG			0X07
-#define	TPS6507X_REG_TSCMODE				0X08
-#define	TPS6507X_REG_ADRESULT_1				0X09
-#define	TPS6507X_REG_ADRESULT_2				0X0A
-#define	TPS6507X_REG_PGOOD				0X0B
-#define	TPS6507X_REG_PGOODMASK				0X0C
-#define	TPS6507X_REG_CON_CTRL1				0X0D
-#define	TPS6507X_REG_CON_CTRL2				0X0E
-#define	TPS6507X_REG_CON_CTRL3				0X0F
-#define	TPS6507X_REG_DEFDCDC1				0X10
-#define	TPS6507X_REG_DEFDCDC2_LOW			0X11
-#define	TPS6507X_REG_DEFDCDC2_HIGH			0X12
-#define	TPS6507X_REG_DEFDCDC3_LOW			0X13
-#define	TPS6507X_REG_DEFDCDC3_HIGH			0X14
-#define	TPS6507X_REG_DEFSLEW				0X15
-#define	TPS6507X_REG_LDO_CTRL1				0X16
-#define	TPS6507X_REG_DEFLDO2				0X17
-#define	TPS6507X_REG_WLED_CTRL1				0X18
-#define	TPS6507X_REG_WLED_CTRL2				0X19
-
-/* CON_CTRL1 bitfields */
-#define	TPS6507X_CON_CTRL1_DCDC1_ENABLE		BIT(4)
-#define	TPS6507X_CON_CTRL1_DCDC2_ENABLE		BIT(3)
-#define	TPS6507X_CON_CTRL1_DCDC3_ENABLE		BIT(2)
-#define	TPS6507X_CON_CTRL1_LDO1_ENABLE		BIT(1)
-#define	TPS6507X_CON_CTRL1_LDO2_ENABLE		BIT(0)
-
-/* DEFDCDC1 bitfields */
-#define TPS6507X_DEFDCDC1_DCDC1_EXT_ADJ_EN	BIT(7)
-#define TPS6507X_DEFDCDC1_DCDC1_MASK		0X3F
-
-/* DEFDCDC2_LOW bitfields */
-#define TPS6507X_DEFDCDC2_LOW_DCDC2_MASK	0X3F
-
-/* DEFDCDC2_HIGH bitfields */
-#define TPS6507X_DEFDCDC2_HIGH_DCDC2_MASK	0X3F
-
-/* DEFDCDC3_LOW bitfields */
-#define TPS6507X_DEFDCDC3_LOW_DCDC3_MASK	0X3F
-
-/* DEFDCDC3_HIGH bitfields */
-#define TPS6507X_DEFDCDC3_HIGH_DCDC3_MASK	0X3F
-
-/* TPS6507X_REG_LDO_CTRL1 bitfields */
-#define TPS6507X_REG_LDO_CTRL1_LDO1_MASK	0X0F
-
-/* TPS6507X_REG_DEFLDO2 bitfields */
-#define TPS6507X_REG_DEFLDO2_LDO2_MASK		0X3F
-
-/* VDCDC MASK */
-#define TPS6507X_DEFDCDCX_DCDC_MASK		0X3F
+#include <linux/mfd/tps6507x.h>
 
 /* DCDC's */
 #define TPS6507X_DCDC_1				0
@@ -162,101 +103,146 @@ struct tps_info {
 	const u16 *table;
 };
 
-struct tps_pmic {
+static const struct tps_info tps6507x_pmic_regs[] = {
+	{
+		.name = "VDCDC1",
+		.min_uV = 725000,
+		.max_uV = 3300000,
+		.table_len = ARRAY_SIZE(VDCDCx_VSEL_table),
+		.table = VDCDCx_VSEL_table,
+	},
+	{
+		.name = "VDCDC2",
+		.min_uV = 725000,
+		.max_uV = 3300000,
+		.table_len = ARRAY_SIZE(VDCDCx_VSEL_table),
+		.table = VDCDCx_VSEL_table,
+	},
+	{
+		.name = "VDCDC3",
+		.min_uV = 725000,
+		.max_uV = 3300000,
+		.table_len = ARRAY_SIZE(VDCDCx_VSEL_table),
+		.table = VDCDCx_VSEL_table,
+	},
+	{
+		.name = "LDO1",
+		.min_uV = 1000000,
+		.max_uV = 3300000,
+		.table_len = ARRAY_SIZE(LDO1_VSEL_table),
+		.table = LDO1_VSEL_table,
+	},
+	{
+		.name = "LDO2",
+		.min_uV = 725000,
+		.max_uV = 3300000,
+		.table_len = ARRAY_SIZE(LDO2_VSEL_table),
+		.table = LDO2_VSEL_table,
+	},
+};
+
+struct tps6507x_pmic {
 	struct regulator_desc desc[TPS6507X_NUM_REGULATOR];
-	struct i2c_client *client;
+	struct tps6507x_dev *mfd;
 	struct regulator_dev *rdev[TPS6507X_NUM_REGULATOR];
 	const struct tps_info *info[TPS6507X_NUM_REGULATOR];
 	struct mutex io_lock;
 };
-
-static inline int tps_6507x_read(struct tps_pmic *tps, u8 reg)
+static inline int tps6507x_pmic_read(struct tps6507x_pmic *tps, u8 reg)
 {
-	return i2c_smbus_read_byte_data(tps->client, reg);
+	u8 val;
+	int err;
+
+	err = tps->mfd->read_dev(tps->mfd, reg, 1, &val);
+
+	if (err)
+		return err;
+
+	return val;
 }
 
-static inline int tps_6507x_write(struct tps_pmic *tps, u8 reg, u8 val)
+static inline int tps6507x_pmic_write(struct tps6507x_pmic *tps, u8 reg, u8 val)
 {
-	return i2c_smbus_write_byte_data(tps->client, reg, val);
+	return tps->mfd->write_dev(tps->mfd, reg, 1, &val);
 }
 
-static int tps_6507x_set_bits(struct tps_pmic *tps, u8 reg, u8 mask)
+static int tps6507x_pmic_set_bits(struct tps6507x_pmic *tps, u8 reg, u8 mask)
 {
 	int err, data;
 
 	mutex_lock(&tps->io_lock);
 
-	data = tps_6507x_read(tps, reg);
+	data = tps6507x_pmic_read(tps, reg);
 	if (data < 0) {
-		dev_err(&tps->client->dev, "Read from reg 0x%x failed\n", reg);
+		dev_err(tps->mfd->dev, "Read from reg 0x%x failed\n", reg);
 		err = data;
 		goto out;
 	}
 
 	data |= mask;
-	err = tps_6507x_write(tps, reg, data);
+	err = tps6507x_pmic_write(tps, reg, data);
 	if (err)
-		dev_err(&tps->client->dev, "Write for reg 0x%x failed\n", reg);
+		dev_err(tps->mfd->dev, "Write for reg 0x%x failed\n", reg);
 
 out:
 	mutex_unlock(&tps->io_lock);
 	return err;
 }
 
-static int tps_6507x_clear_bits(struct tps_pmic *tps, u8 reg, u8 mask)
+static int tps6507x_pmic_clear_bits(struct tps6507x_pmic *tps, u8 reg, u8 mask)
 {
 	int err, data;
 
 	mutex_lock(&tps->io_lock);
 
-	data = tps_6507x_read(tps, reg);
+	data = tps6507x_pmic_read(tps, reg);
 	if (data < 0) {
-		dev_err(&tps->client->dev, "Read from reg 0x%x failed\n", reg);
+		dev_err(tps->mfd->dev, "Read from reg 0x%x failed\n", reg);
 		err = data;
 		goto out;
 	}
 
 	data &= ~mask;
-	err = tps_6507x_write(tps, reg, data);
+	err = tps6507x_pmic_write(tps, reg, data);
 	if (err)
-		dev_err(&tps->client->dev, "Write for reg 0x%x failed\n", reg);
+		dev_err(tps->mfd->dev, "Write for reg 0x%x failed\n", reg);
 
 out:
 	mutex_unlock(&tps->io_lock);
 	return err;
 }
 
-static int tps_6507x_reg_read(struct tps_pmic *tps, u8 reg)
+static int tps6507x_pmic_reg_read(struct tps6507x_pmic *tps, u8 reg)
 {
 	int data;
 
 	mutex_lock(&tps->io_lock);
 
-	data = tps_6507x_read(tps, reg);
+	data = tps6507x_pmic_read(tps, reg);
 	if (data < 0)
-		dev_err(&tps->client->dev, "Read from reg 0x%x failed\n", reg);
+		dev_err(tps->mfd->dev, "Read from reg 0x%x failed\n", reg);
 
 	mutex_unlock(&tps->io_lock);
 	return data;
 }
 
-static int tps_6507x_reg_write(struct tps_pmic *tps, u8 reg, u8 val)
+static int tps6507x_pmic_reg_write(struct tps6507x_pmic *tps, u8 reg, u8 val)
 {
 	int err;
 
 	mutex_lock(&tps->io_lock);
 
-	err = tps_6507x_write(tps, reg, val);
+	err = tps6507x_pmic_write(tps, reg, val);
 	if (err < 0)
-		dev_err(&tps->client->dev, "Write for reg 0x%x failed\n", reg);
+		dev_err(tps->mfd->dev, "Write for reg 0x%x failed\n", reg);
 
 	mutex_unlock(&tps->io_lock);
 	return err;
 }
 
-static int tps6507x_dcdc_is_enabled(struct regulator_dev *dev)
+static int tps6507x_pmic_dcdc_is_enabled(struct regulator_dev *dev)
 {
-	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
 	int data, dcdc = rdev_get_id(dev);
 	u8 shift;
 
@@ -264,7 +250,7 @@ static int tps6507x_dcdc_is_enabled(struct regulator_dev *dev)
 		return -EINVAL;
 
 	shift = TPS6507X_MAX_REG_ID - dcdc;
-	data = tps_6507x_reg_read(tps, TPS6507X_REG_CON_CTRL1);
+	data = tps6507x_pmic_reg_read(tps, TPS6507X_REG_CON_CTRL1);
 
 	if (data < 0)
 		return data;
@@ -272,9 +258,9 @@ static int tps6507x_dcdc_is_enabled(struct regulator_dev *dev)
 		return (data & 1<<shift) ? 1 : 0;
 }
 
-static int tps6507x_ldo_is_enabled(struct regulator_dev *dev)
+static int tps6507x_pmic_ldo_is_enabled(struct regulator_dev *dev)
 {
-	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
 	int data, ldo = rdev_get_id(dev);
 	u8 shift;
 
@@ -282,7 +268,7 @@ static int tps6507x_ldo_is_enabled(struct regulator_dev *dev)
 		return -EINVAL;
 
 	shift = TPS6507X_MAX_REG_ID - ldo;
-	data = tps_6507x_reg_read(tps, TPS6507X_REG_CON_CTRL1);
+	data = tps6507x_pmic_reg_read(tps, TPS6507X_REG_CON_CTRL1);
 
 	if (data < 0)
 		return data;
@@ -290,9 +276,9 @@ static int tps6507x_ldo_is_enabled(struct regulator_dev *dev)
 		return (data & 1<<shift) ? 1 : 0;
 }
 
-static int tps6507x_dcdc_enable(struct regulator_dev *dev)
+static int tps6507x_pmic_dcdc_enable(struct regulator_dev *dev)
 {
-	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
 	int dcdc = rdev_get_id(dev);
 	u8 shift;
 
@@ -300,12 +286,12 @@ static int tps6507x_dcdc_enable(struct regulator_dev *dev)
 		return -EINVAL;
 
 	shift = TPS6507X_MAX_REG_ID - dcdc;
-	return tps_6507x_set_bits(tps, TPS6507X_REG_CON_CTRL1, 1 << shift);
+	return tps6507x_pmic_set_bits(tps, TPS6507X_REG_CON_CTRL1, 1 << shift);
 }
 
-static int tps6507x_dcdc_disable(struct regulator_dev *dev)
+static int tps6507x_pmic_dcdc_disable(struct regulator_dev *dev)
 {
-	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
 	int dcdc = rdev_get_id(dev);
 	u8 shift;
 
@@ -313,12 +299,13 @@ static int tps6507x_dcdc_disable(struct regulator_dev *dev)
 		return -EINVAL;
 
 	shift = TPS6507X_MAX_REG_ID - dcdc;
-	return tps_6507x_clear_bits(tps, TPS6507X_REG_CON_CTRL1, 1 << shift);
+	return tps6507x_pmic_clear_bits(tps, TPS6507X_REG_CON_CTRL1,
+					1 << shift);
 }
 
-static int tps6507x_ldo_enable(struct regulator_dev *dev)
+static int tps6507x_pmic_ldo_enable(struct regulator_dev *dev)
 {
-	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
 	int ldo = rdev_get_id(dev);
 	u8 shift;
 
@@ -326,12 +313,12 @@ static int tps6507x_ldo_enable(struct regulator_dev *dev)
 		return -EINVAL;
 
 	shift = TPS6507X_MAX_REG_ID - ldo;
-	return tps_6507x_set_bits(tps, TPS6507X_REG_CON_CTRL1, 1 << shift);
+	return tps6507x_pmic_set_bits(tps, TPS6507X_REG_CON_CTRL1, 1 << shift);
 }
 
-static int tps6507x_ldo_disable(struct regulator_dev *dev)
+static int tps6507x_pmic_ldo_disable(struct regulator_dev *dev)
 {
-	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
 	int ldo = rdev_get_id(dev);
 	u8 shift;
 
@@ -339,12 +326,13 @@ static int tps6507x_ldo_disable(struct regulator_dev *dev)
 		return -EINVAL;
 
 	shift = TPS6507X_MAX_REG_ID - ldo;
-	return tps_6507x_clear_bits(tps, TPS6507X_REG_CON_CTRL1, 1 << shift);
+	return tps6507x_pmic_clear_bits(tps, TPS6507X_REG_CON_CTRL1,
+					1 << shift);
 }
 
-static int tps6507x_dcdc_get_voltage(struct regulator_dev *dev)
+static int tps6507x_pmic_dcdc_get_voltage(struct regulator_dev *dev)
 {
-	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
 	int data, dcdc = rdev_get_id(dev);
 	u8 reg;
 
@@ -362,7 +350,7 @@ static int tps6507x_dcdc_get_voltage(struct regulator_dev *dev)
 		return -EINVAL;
 	}
 
-	data = tps_6507x_reg_read(tps, reg);
+	data = tps6507x_pmic_reg_read(tps, reg);
 	if (data < 0)
 		return data;
 
@@ -370,10 +358,10 @@ static int tps6507x_dcdc_get_voltage(struct regulator_dev *dev)
 	return tps->info[dcdc]->table[data] * 1000;
 }
 
-static int tps6507x_dcdc_set_voltage(struct regulator_dev *dev,
+static int tps6507x_pmic_dcdc_set_voltage(struct regulator_dev *dev,
 				int min_uV, int max_uV)
 {
-	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
 	int data, vsel, dcdc = rdev_get_id(dev);
 	u8 reg;
 
@@ -411,19 +399,19 @@ static int tps6507x_dcdc_set_voltage(struct regulator_dev *dev,
 	if (vsel == tps->info[dcdc]->table_len)
 		return -EINVAL;
 
-	data = tps_6507x_reg_read(tps, reg);
+	data = tps6507x_pmic_reg_read(tps, reg);
 	if (data < 0)
 		return data;
 
 	data &= ~TPS6507X_DEFDCDCX_DCDC_MASK;
 	data |= vsel;
 
-	return tps_6507x_reg_write(tps, reg, data);
+	return tps6507x_pmic_reg_write(tps, reg, data);
 }
 
-static int tps6507x_ldo_get_voltage(struct regulator_dev *dev)
+static int tps6507x_pmic_ldo_get_voltage(struct regulator_dev *dev)
 {
-	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
 	int data, ldo = rdev_get_id(dev);
 	u8 reg, mask;
 
@@ -437,7 +425,7 @@ static int tps6507x_ldo_get_voltage(struct regulator_dev *dev)
 				TPS6507X_REG_DEFLDO2_LDO2_MASK);
 	}
 
-	data = tps_6507x_reg_read(tps, reg);
+	data = tps6507x_pmic_reg_read(tps, reg);
 	if (data < 0)
 		return data;
 
@@ -445,10 +433,10 @@ static int tps6507x_ldo_get_voltage(struct regulator_dev *dev)
 	return tps->info[ldo]->table[data] * 1000;
 }
 
-static int tps6507x_ldo_set_voltage(struct regulator_dev *dev,
+static int tps6507x_pmic_ldo_set_voltage(struct regulator_dev *dev,
 				int min_uV, int max_uV)
 {
-	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
 	int data, vsel, ldo = rdev_get_id(dev);
 	u8 reg, mask;
 
@@ -479,20 +467,20 @@ static int tps6507x_ldo_set_voltage(struct regulator_dev *dev,
 	if (vsel == tps->info[ldo]->table_len)
 		return -EINVAL;
 
-	data = tps_6507x_reg_read(tps, reg);
+	data = tps6507x_pmic_reg_read(tps, reg);
 	if (data < 0)
 		return data;
 
 	data &= ~mask;
 	data |= vsel;
 
-	return tps_6507x_reg_write(tps, reg, data);
+	return tps6507x_pmic_reg_write(tps, reg, data);
 }
 
-static int tps6507x_dcdc_list_voltage(struct regulator_dev *dev,
+static int tps6507x_pmic_dcdc_list_voltage(struct regulator_dev *dev,
 					unsigned selector)
 {
-	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
 	int dcdc = rdev_get_id(dev);
 
 	if (dcdc < TPS6507X_DCDC_1 || dcdc > TPS6507X_DCDC_3)
@@ -504,10 +492,10 @@ static int tps6507x_dcdc_list_voltage(struct regulator_dev *dev,
 		return tps->info[dcdc]->table[selector] * 1000;
 }
 
-static int tps6507x_ldo_list_voltage(struct regulator_dev *dev,
+static int tps6507x_pmic_ldo_list_voltage(struct regulator_dev *dev,
 					unsigned selector)
 {
-	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
 	int ldo = rdev_get_id(dev);
 
 	if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2)
@@ -520,47 +508,54 @@ static int tps6507x_ldo_list_voltage(struct regulator_dev *dev,
 }
 
 /* Operations permitted on VDCDCx */
-static struct regulator_ops tps6507x_dcdc_ops = {
-	.is_enabled = tps6507x_dcdc_is_enabled,
-	.enable = tps6507x_dcdc_enable,
-	.disable = tps6507x_dcdc_disable,
-	.get_voltage = tps6507x_dcdc_get_voltage,
-	.set_voltage = tps6507x_dcdc_set_voltage,
-	.list_voltage = tps6507x_dcdc_list_voltage,
+static struct regulator_ops tps6507x_pmic_dcdc_ops = {
+	.is_enabled = tps6507x_pmic_dcdc_is_enabled,
+	.enable = tps6507x_pmic_dcdc_enable,
+	.disable = tps6507x_pmic_dcdc_disable,
+	.get_voltage = tps6507x_pmic_dcdc_get_voltage,
+	.set_voltage = tps6507x_pmic_dcdc_set_voltage,
+	.list_voltage = tps6507x_pmic_dcdc_list_voltage,
 };
 
 /* Operations permitted on LDOx */
-static struct regulator_ops tps6507x_ldo_ops = {
-	.is_enabled = tps6507x_ldo_is_enabled,
-	.enable = tps6507x_ldo_enable,
-	.disable = tps6507x_ldo_disable,
-	.get_voltage = tps6507x_ldo_get_voltage,
-	.set_voltage = tps6507x_ldo_set_voltage,
-	.list_voltage = tps6507x_ldo_list_voltage,
+static struct regulator_ops tps6507x_pmic_ldo_ops = {
+	.is_enabled = tps6507x_pmic_ldo_is_enabled,
+	.enable = tps6507x_pmic_ldo_enable,
+	.disable = tps6507x_pmic_ldo_disable,
+	.get_voltage = tps6507x_pmic_ldo_get_voltage,
+	.set_voltage = tps6507x_pmic_ldo_set_voltage,
+	.list_voltage = tps6507x_pmic_ldo_list_voltage,
 };
 
-static int __devinit tps_6507x_probe(struct i2c_client *client,
-				     const struct i2c_device_id *id)
+static __devinit
+int tps6507x_pmic_probe(struct platform_device *pdev)
 {
+	struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent);
 	static int desc_id;
-	const struct tps_info *info = (void *)id->driver_data;
+	const struct tps_info *info = &tps6507x_pmic_regs[0];
 	struct regulator_init_data *init_data;
 	struct regulator_dev *rdev;
-	struct tps_pmic *tps;
+	struct tps6507x_pmic *tps;
+	struct tps6507x_board *tps_board;
 	int i;
 	int error;
 
-	if (!i2c_check_functionality(client->adapter,
-				I2C_FUNC_SMBUS_BYTE_DATA))
-		return -EIO;
+	/**
+	 * tps_board points to pmic related constants
+	 * coming from the board-evm file.
+	 */
+
+	tps_board = dev_get_platdata(tps6507x_dev->dev);
+	if (!tps_board)
+		return -EINVAL;
 
 	/**
 	 * init_data points to array of regulator_init structures
 	 * coming from the board-evm file.
 	 */
-	init_data = client->dev.platform_data;
+	init_data = tps_board->tps6507x_pmic_init_data;
 	if (!init_data)
-		return -EIO;
+		return -EINVAL;
 
 	tps = kzalloc(sizeof(*tps), GFP_KERNEL);
 	if (!tps)
@@ -569,7 +564,7 @@ static int __devinit tps_6507x_probe(struct i2c_client *client,
 	mutex_init(&tps->io_lock);
 
 	/* common for all regulators */
-	tps->client = client;
+	tps->mfd = tps6507x_dev;
 
 	for (i = 0; i < TPS6507X_NUM_REGULATOR; i++, info++, init_data++) {
 		/* Register the regulators */
@@ -578,15 +573,16 @@ static int __devinit tps_6507x_probe(struct i2c_client *client,
 		tps->desc[i].id = desc_id++;
 		tps->desc[i].n_voltages = num_voltages[i];
 		tps->desc[i].ops = (i > TPS6507X_DCDC_3 ?
-				&tps6507x_ldo_ops : &tps6507x_dcdc_ops);
+		&tps6507x_pmic_ldo_ops : &tps6507x_pmic_dcdc_ops);
 		tps->desc[i].type = REGULATOR_VOLTAGE;
 		tps->desc[i].owner = THIS_MODULE;
 
 		rdev = regulator_register(&tps->desc[i],
-					&client->dev, init_data, tps);
+					tps6507x_dev->dev, init_data, tps);
 		if (IS_ERR(rdev)) {
-			dev_err(&client->dev, "failed to register %s\n",
-				id->name);
+			dev_err(tps6507x_dev->dev,
+				"failed to register %s regulator\n",
+				pdev->name);
 			error = PTR_ERR(rdev);
 			goto fail;
 		}
@@ -595,7 +591,7 @@ static int __devinit tps_6507x_probe(struct i2c_client *client,
 		tps->rdev[i] = rdev;
 	}
 
-	i2c_set_clientdata(client, tps);
+	tps6507x_dev->pmic = tps;
 
 	return 0;
 
@@ -608,19 +604,17 @@ fail:
 }
 
 /**
- * tps_6507x_remove - TPS6507x driver i2c remove handler
+ * tps6507x_remove - TPS6507x driver i2c remove handler
  * @client: i2c driver client device structure
  *
  * Unregister TPS driver as an i2c client device driver
  */
-static int __devexit tps_6507x_remove(struct i2c_client *client)
+static int __devexit tps6507x_pmic_remove(struct platform_device *pdev)
 {
-	struct tps_pmic *tps = i2c_get_clientdata(client);
+	struct tps6507x_dev *tps6507x_dev = platform_get_drvdata(pdev);
+	struct tps6507x_pmic *tps = tps6507x_dev->pmic;
 	int i;
 
-	/* clear the client data in i2c */
-	i2c_set_clientdata(client, NULL);
-
 	for (i = 0; i < TPS6507X_NUM_REGULATOR; i++)
 		regulator_unregister(tps->rdev[i]);
 
@@ -629,83 +623,38 @@ static int __devexit tps_6507x_remove(struct i2c_client *client)
 	return 0;
 }
 
-static const struct tps_info tps6507x_regs[] = {
-	{
-		.name = "VDCDC1",
-		.min_uV = 725000,
-		.max_uV = 3300000,
-		.table_len = ARRAY_SIZE(VDCDCx_VSEL_table),
-		.table = VDCDCx_VSEL_table,
-	},
-	{
-		.name = "VDCDC2",
-		.min_uV = 725000,
-		.max_uV = 3300000,
-		.table_len = ARRAY_SIZE(VDCDCx_VSEL_table),
-		.table = VDCDCx_VSEL_table,
-	},
-	{
-		.name = "VDCDC3",
-		.min_uV = 725000,
-		.max_uV = 3300000,
-		.table_len = ARRAY_SIZE(VDCDCx_VSEL_table),
-		.table = VDCDCx_VSEL_table,
-	},
-	{
-		.name = "LDO1",
-		.min_uV = 1000000,
-		.max_uV = 3300000,
-		.table_len = ARRAY_SIZE(LDO1_VSEL_table),
-		.table = LDO1_VSEL_table,
-	},
-	{
-		.name = "LDO2",
-		.min_uV = 725000,
-		.max_uV = 3300000,
-		.table_len = ARRAY_SIZE(LDO2_VSEL_table),
-		.table = LDO2_VSEL_table,
-	},
-};
-
-static const struct i2c_device_id tps_6507x_id[] = {
-	{.name = "tps6507x",
-	.driver_data = (unsigned long) tps6507x_regs,},
-	{ },
-};
-MODULE_DEVICE_TABLE(i2c, tps_6507x_id);
-
-static struct i2c_driver tps_6507x_i2c_driver = {
+static struct platform_driver tps6507x_pmic_driver = {
 	.driver = {
-		.name = "tps6507x",
+		.name = "tps6507x-pmic",
 		.owner = THIS_MODULE,
 	},
-	.probe = tps_6507x_probe,
-	.remove = __devexit_p(tps_6507x_remove),
-	.id_table = tps_6507x_id,
+	.probe = tps6507x_pmic_probe,
+	.remove = __devexit_p(tps6507x_pmic_remove),
 };
 
 /**
- * tps_6507x_init
+ * tps6507x_pmic_init
  *
  * Module init function
  */
-static int __init tps_6507x_init(void)
+static int __init tps6507x_pmic_init(void)
 {
-	return i2c_add_driver(&tps_6507x_i2c_driver);
+	return platform_driver_register(&tps6507x_pmic_driver);
 }
-subsys_initcall(tps_6507x_init);
+subsys_initcall(tps6507x_pmic_init);
 
 /**
- * tps_6507x_cleanup
+ * tps6507x_pmic_cleanup
  *
  * Module exit function
  */
-static void __exit tps_6507x_cleanup(void)
+static void __exit tps6507x_pmic_cleanup(void)
 {
-	i2c_del_driver(&tps_6507x_i2c_driver);
+	platform_driver_unregister(&tps6507x_pmic_driver);
 }
-module_exit(tps_6507x_cleanup);
+module_exit(tps6507x_pmic_cleanup);
 
 MODULE_AUTHOR("Texas Instruments");
 MODULE_DESCRIPTION("TPS6507x voltage regulator driver");
 MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:tps6507x-pmic");
diff --git a/drivers/rtc/rtc-ab3100.c b/drivers/rtc/rtc-ab3100.c
index 4704aac2b5a..d26780ea254 100644
--- a/drivers/rtc/rtc-ab3100.c
+++ b/drivers/rtc/rtc-ab3100.c
@@ -9,7 +9,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/rtc.h>
-#include <linux/mfd/ab3100.h>
+#include <linux/mfd/abx500.h>
 
 /* Clock rate in Hz */
 #define AB3100_RTC_CLOCK_RATE	32768
@@ -45,7 +45,6 @@
  */
 static int ab3100_rtc_set_mmss(struct device *dev, unsigned long secs)
 {
-	struct ab3100 *ab3100_data = dev_get_drvdata(dev);
 	u8 regs[] = {AB3100_TI0, AB3100_TI1, AB3100_TI2,
 		     AB3100_TI3, AB3100_TI4, AB3100_TI5};
 	unsigned char buf[6];
@@ -61,27 +60,26 @@ static int ab3100_rtc_set_mmss(struct device *dev, unsigned long secs)
 	buf[5] = (fat_time >> 40) & 0xFF;
 
 	for (i = 0; i < 6; i++) {
-		err = ab3100_set_register_interruptible(ab3100_data,
+		err = abx500_set_register_interruptible(dev, 0,
 							regs[i], buf[i]);
 		if (err)
 			return err;
 	}
 
 	/* Set the flag to mark that the clock is now set */
-	return ab3100_mask_and_set_register_interruptible(ab3100_data,
+	return abx500_mask_and_set_register_interruptible(dev, 0,
 							  AB3100_RTC,
-							  0xFE, 0x01);
+							  0x01, 0x01);
 
 }
 
 static int ab3100_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	struct ab3100 *ab3100_data = dev_get_drvdata(dev);
 	unsigned long time;
 	u8 rtcval;
 	int err;
 
-	err = ab3100_get_register_interruptible(ab3100_data,
+	err = abx500_get_register_interruptible(dev, 0,
 						AB3100_RTC, &rtcval);
 	if (err)
 		return err;
@@ -94,7 +92,7 @@ static int ab3100_rtc_read_time(struct device *dev, struct rtc_time *tm)
 		u8 buf[6];
 
 		/* Read out time registers */
-		err = ab3100_get_register_page_interruptible(ab3100_data,
+		err = abx500_get_register_page_interruptible(dev, 0,
 							     AB3100_TI0,
 							     buf, 6);
 		if (err != 0)
@@ -114,7 +112,6 @@ static int ab3100_rtc_read_time(struct device *dev, struct rtc_time *tm)
 
 static int ab3100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 {
-	struct ab3100 *ab3100_data = dev_get_drvdata(dev);
 	unsigned long time;
 	u64 fat_time;
 	u8 buf[6];
@@ -122,7 +119,7 @@ static int ab3100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	int err;
 
 	/* Figure out if alarm is enabled or not */
-	err = ab3100_get_register_interruptible(ab3100_data,
+	err = abx500_get_register_interruptible(dev, 0,
 						AB3100_RTC, &rtcval);
 	if (err)
 		return err;
@@ -133,7 +130,7 @@ static int ab3100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	/* No idea how this could be represented */
 	alarm->pending = 0;
 	/* Read out alarm registers, only 4 bytes */
-	err = ab3100_get_register_page_interruptible(ab3100_data,
+	err = abx500_get_register_page_interruptible(dev, 0,
 						     AB3100_AL0, buf, 4);
 	if (err)
 		return err;
@@ -148,7 +145,6 @@ static int ab3100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 
 static int ab3100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 {
-	struct ab3100 *ab3100_data = dev_get_drvdata(dev);
 	u8 regs[] = {AB3100_AL0, AB3100_AL1, AB3100_AL2, AB3100_AL3};
 	unsigned char buf[4];
 	unsigned long secs;
@@ -165,21 +161,19 @@ static int ab3100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 
 	/* Set the alarm */
 	for (i = 0; i < 4; i++) {
-		err = ab3100_set_register_interruptible(ab3100_data,
+		err = abx500_set_register_interruptible(dev, 0,
 							regs[i], buf[i]);
 		if (err)
 			return err;
 	}
 	/* Then enable the alarm */
-	return ab3100_mask_and_set_register_interruptible(ab3100_data,
-							  AB3100_RTC, ~(1 << 2),
+	return abx500_mask_and_set_register_interruptible(dev, 0,
+							  AB3100_RTC, (1 << 2),
 							  alarm->enabled << 2);
 }
 
 static int ab3100_rtc_irq_enable(struct device *dev, unsigned int enabled)
 {
-	struct ab3100 *ab3100_data = dev_get_drvdata(dev);
-
 	/*
 	 * It's not possible to enable/disable the alarm IRQ for this RTC.
 	 * It does not actually trigger any IRQ: instead its only function is
@@ -188,12 +182,12 @@ static int ab3100_rtc_irq_enable(struct device *dev, unsigned int enabled)
 	 * and need to be handled there instead.
 	 */
 	if (enabled)
-		return ab3100_mask_and_set_register_interruptible(ab3100_data,
-						    AB3100_RTC, ~(1 << 2),
+		return abx500_mask_and_set_register_interruptible(dev, 0,
+						    AB3100_RTC, (1 << 2),
 						    1 << 2);
 	else
-		return ab3100_mask_and_set_register_interruptible(ab3100_data,
-						    AB3100_RTC, ~(1 << 2),
+		return abx500_mask_and_set_register_interruptible(dev, 0,
+						    AB3100_RTC, (1 << 2),
 						    0);
 }
 
@@ -210,10 +204,9 @@ static int __init ab3100_rtc_probe(struct platform_device *pdev)
 	int err;
 	u8 regval;
 	struct rtc_device *rtc;
-	struct ab3100 *ab3100_data = platform_get_drvdata(pdev);
 
 	/* The first RTC register needs special treatment */
-	err = ab3100_get_register_interruptible(ab3100_data,
+	err = abx500_get_register_interruptible(&pdev->dev, 0,
 						AB3100_RTC, &regval);
 	if (err) {
 		dev_err(&pdev->dev, "unable to read RTC register\n");
@@ -231,7 +224,7 @@ static int __init ab3100_rtc_probe(struct platform_device *pdev)
 		 * This bit remains until RTC power is lost.
 		 */
 		regval = 1 | RTC_SETTING;
-		err = ab3100_set_register_interruptible(ab3100_data,
+		err = abx500_set_register_interruptible(&pdev->dev, 0,
 							AB3100_RTC, regval);
 		/* Ignore any error on this write */
 	}
diff --git a/drivers/watchdog/rdc321x_wdt.c b/drivers/watchdog/rdc321x_wdt.c
index 69c6adbd820..428f8a1583e 100644
--- a/drivers/watchdog/rdc321x_wdt.c
+++ b/drivers/watchdog/rdc321x_wdt.c
@@ -1,7 +1,7 @@
 /*
  * RDC321x watchdog driver
  *
- * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2007-2010 Florian Fainelli <florian@openwrt.org>
  *
  * This driver is highly inspired from the cpu5_wdt driver
  *
@@ -36,8 +36,7 @@
 #include <linux/watchdog.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
-
-#include <asm/rdc321x_defs.h>
+#include <linux/mfd/rdc321x.h>
 
 #define RDC_WDT_MASK	0x80000000 /* Mask */
 #define RDC_WDT_EN	0x00800000 /* Enable bit */
@@ -63,6 +62,8 @@ static struct {
 	int default_ticks;
 	unsigned long inuse;
 	spinlock_t lock;
+	struct pci_dev *sb_pdev;
+	int base_reg;
 } rdc321x_wdt_device;
 
 /* generic helper functions */
@@ -70,14 +71,18 @@ static struct {
 static void rdc321x_wdt_trigger(unsigned long unused)
 {
 	unsigned long flags;
+	u32 val;
 
 	if (rdc321x_wdt_device.running)
 		ticks--;
 
 	/* keep watchdog alive */
 	spin_lock_irqsave(&rdc321x_wdt_device.lock, flags);
-	outl(RDC_WDT_EN | inl(RDC3210_CFGREG_DATA),
-		RDC3210_CFGREG_DATA);
+	pci_read_config_dword(rdc321x_wdt_device.sb_pdev,
+					rdc321x_wdt_device.base_reg, &val);
+	val |= RDC_WDT_EN;
+	pci_write_config_dword(rdc321x_wdt_device.sb_pdev,
+					rdc321x_wdt_device.base_reg, val);
 	spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags);
 
 	/* requeue?? */
@@ -105,10 +110,13 @@ static void rdc321x_wdt_start(void)
 
 		/* Clear the timer */
 		spin_lock_irqsave(&rdc321x_wdt_device.lock, flags);
-		outl(RDC_CLS_TMR, RDC3210_CFGREG_ADDR);
+		pci_write_config_dword(rdc321x_wdt_device.sb_pdev,
+				rdc321x_wdt_device.base_reg, RDC_CLS_TMR);
 
 		/* Enable watchdog and set the timeout to 81.92 us */
-		outl(RDC_WDT_EN | RDC_WDT_CNT, RDC3210_CFGREG_DATA);
+		pci_write_config_dword(rdc321x_wdt_device.sb_pdev,
+					rdc321x_wdt_device.base_reg,
+					RDC_WDT_EN | RDC_WDT_CNT);
 		spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags);
 
 		mod_timer(&rdc321x_wdt_device.timer,
@@ -148,7 +156,7 @@ static long rdc321x_wdt_ioctl(struct file *file, unsigned int cmd,
 				unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
-	unsigned int value;
+	u32 value;
 	static const struct watchdog_info ident = {
 		.options = WDIOF_CARDRESET,
 		.identity = "RDC321x WDT",
@@ -162,9 +170,10 @@ static long rdc321x_wdt_ioctl(struct file *file, unsigned int cmd,
 	case WDIOC_GETSTATUS:
 		/* Read the value from the DATA register */
 		spin_lock_irqsave(&rdc321x_wdt_device.lock, flags);
-		value = inl(RDC3210_CFGREG_DATA);
+		pci_read_config_dword(rdc321x_wdt_device.sb_pdev,
+					rdc321x_wdt_device.base_reg, &value);
 		spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags);
-		if (copy_to_user(argp, &value, sizeof(int)))
+		if (copy_to_user(argp, &value, sizeof(u32)))
 			return -EFAULT;
 		break;
 	case WDIOC_GETSUPPORT:
@@ -219,17 +228,35 @@ static struct miscdevice rdc321x_wdt_misc = {
 static int __devinit rdc321x_wdt_probe(struct platform_device *pdev)
 {
 	int err;
+	struct resource *r;
+	struct rdc321x_wdt_pdata *pdata;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data supplied\n");
+		return -ENODEV;
+	}
+
+	r = platform_get_resource_byname(pdev, IORESOURCE_IO, "wdt-reg");
+	if (!r) {
+		dev_err(&pdev->dev, "failed to get wdt-reg resource\n");
+		return -ENODEV;
+	}
+
+	rdc321x_wdt_device.sb_pdev = pdata->sb_pdev;
+	rdc321x_wdt_device.base_reg = r->start;
 
 	err = misc_register(&rdc321x_wdt_misc);
 	if (err < 0) {
-		printk(KERN_ERR PFX "watchdog misc_register failed\n");
+		dev_err(&pdev->dev, "misc_register failed\n");
 		return err;
 	}
 
 	spin_lock_init(&rdc321x_wdt_device.lock);
 
 	/* Reset the watchdog */
-	outl(RDC_WDT_RST, RDC3210_CFGREG_DATA);
+	pci_write_config_dword(rdc321x_wdt_device.sb_pdev,
+				rdc321x_wdt_device.base_reg, RDC_WDT_RST);
 
 	init_completion(&rdc321x_wdt_device.stop);
 	rdc321x_wdt_device.queue = 0;
@@ -240,7 +267,7 @@ static int __devinit rdc321x_wdt_probe(struct platform_device *pdev)
 
 	rdc321x_wdt_device.default_ticks = ticks;
 
-	printk(KERN_INFO PFX "watchdog init success\n");
+	dev_info(&pdev->dev, "watchdog init success\n");
 
 	return 0;
 }