Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (79 commits)
  powerpc/8xx: Add support for the MPC8xx based boards from TQC
  powerpc/85xx: Introduce support for the Freescale P1022DS reference board
  powerpc/85xx: Adding DTS for the STx GP3-SSA MPC8555 board
  powerpc/85xx: Change deprecated binding for 85xx-based boards
  powerpc/tqm85xx: add a quirk for ti1520 PCMCIA bridge
  powerpc/tqm85xx: update PCI interrupt-map attribute
  powerpc/mpc8308rdb: support for MPC8308RDB board from Freescale
  powerpc/fsl_pci: add quirk for mpc8308 pcie bridge
  powerpc/85xx: Cleanup QE initialization for MPC85xxMDS boards
  powerpc/85xx: Fix booting for P1021MDS boards
  powerpc/85xx: Fix SWIOTLB initalization for MPC85xxMDS boards
  powerpc/85xx: kexec for SMP 85xx BookE systems
  powerpc/5200/i2c: improve i2c bus error recovery
  of/xilinxfb: update tft compatible versions
  powerpc/fsl-diu-fb: Support setting display mode using EDID
  powerpc/5121: doc/dts-bindings: update doc of FSL DIU bindings
  powerpc/5121: shared DIU framebuffer support
  powerpc/5121: move fsl-diu-fb.h to include/linux
  powerpc/5121: fsl-diu-fb: fix issue with re-enabling DIU area descriptor
  powerpc/512x: add clock structure for Video-IN (VIU) unit
  ...

13 files changed, 294 insertions, 388 deletions

diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 35cca4c7fb1..fa27d1676ee 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -194,7 +194,7 @@ static int __init hvc_console_setup(struct console *co, char *options)
 	return 0;
 }
 
-static struct console hvc_con_driver = {
+static struct console hvc_console = {
 	.name		= "hvc",
 	.write		= hvc_console_print,
 	.device		= hvc_console_device,
@@ -220,7 +220,7 @@ static struct console hvc_con_driver = {
  */
 static int __init hvc_console_init(void)
 {
-	register_console(&hvc_con_driver);
+	register_console(&hvc_console);
 	return 0;
 }
 console_initcall(hvc_console_init);
@@ -276,8 +276,8 @@ int hvc_instantiate(uint32_t vtermno, int index, const struct hv_ops *ops)
 	 * now (setup won't fail at this point).  It's ok to just
 	 * call register again if previously .setup failed.
 	 */
-	if (index == hvc_con_driver.index)
-		register_console(&hvc_con_driver);
+	if (index == hvc_console.index)
+		register_console(&hvc_console);
 
 	return 0;
 }
@@ -641,7 +641,7 @@ int hvc_poll(struct hvc_struct *hp)
 		}
 		for (i = 0; i < n; ++i) {
 #ifdef CONFIG_MAGIC_SYSRQ
-			if (hp->index == hvc_con_driver.index) {
+			if (hp->index == hvc_console.index) {
 				/* Handle the SysRq Hack */
 				/* XXX should support a sequence */
 				if (buf[i] == '\x0f') {	/* ^O */
@@ -909,7 +909,7 @@ static void __exit hvc_exit(void)
 		tty_unregister_driver(hvc_driver);
 		/* return tty_struct instances allocated in hvc_init(). */
 		put_tty_driver(hvc_driver);
-		unregister_console(&hvc_con_driver);
+		unregister_console(&hvc_console);
 	}
 }
 module_exit(hvc_exit);
diff --git a/drivers/char/hvsi.c b/drivers/char/hvsi.c
index d4b14ff1c4c..1f4b6de65a2 100644
--- a/drivers/char/hvsi.c
+++ b/drivers/char/hvsi.c
@@ -1255,7 +1255,7 @@ static int __init hvsi_console_setup(struct console *console, char *options)
 	return 0;
 }
 
-static struct console hvsi_con_driver = {
+static struct console hvsi_console = {
 	.name		= "hvsi",
 	.write		= hvsi_console_print,
 	.device		= hvsi_console_device,
@@ -1308,7 +1308,7 @@ static int __init hvsi_console_init(void)
 	}
 
 	if (hvsi_count)
-		register_console(&hvsi_con_driver);
+		register_console(&hvsi_console);
 	return 0;
 }
 console_initcall(hvsi_console_init);
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index df00eb1f11f..54247d475fc 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -63,6 +63,7 @@ struct mpc_i2c {
 	wait_queue_head_t queue;
 	struct i2c_adapter adap;
 	int irq;
+	u32 real_clk;
 };
 
 struct mpc_i2c_divider {
@@ -96,20 +97,23 @@ static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
 /* Sometimes 9th clock pulse isn't generated, and slave doesn't release
  * the bus, because it wants to send ACK.
  * Following sequence of enabling/disabling and sending start/stop generates
- * the pulse, so it's all OK.
+ * the 9 pulses, so it's all OK.
  */
 static void mpc_i2c_fixup(struct mpc_i2c *i2c)
 {
-	writeccr(i2c, 0);
-	udelay(30);
-	writeccr(i2c, CCR_MEN);
-	udelay(30);
-	writeccr(i2c, CCR_MSTA | CCR_MTX);
-	udelay(30);
-	writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN);
-	udelay(30);
-	writeccr(i2c, CCR_MEN);
-	udelay(30);
+	int k;
+	u32 delay_val = 1000000 / i2c->real_clk + 1;
+
+	if (delay_val < 2)
+		delay_val = 2;
+
+	for (k = 9; k; k--) {
+		writeccr(i2c, 0);
+		writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN);
+		udelay(delay_val);
+		writeccr(i2c, CCR_MEN);
+		udelay(delay_val << 1);
+	}
 }
 
 static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
@@ -190,15 +194,18 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] __devinitconst = {
 };
 
 static int __devinit mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,
-					  int prescaler)
+					  int prescaler, u32 *real_clk)
 {
 	const struct mpc_i2c_divider *div = NULL;
 	unsigned int pvr = mfspr(SPRN_PVR);
 	u32 divider;
 	int i;
 
-	if (clock == MPC_I2C_CLOCK_LEGACY)
+	if (clock == MPC_I2C_CLOCK_LEGACY) {
+		/* see below - default fdr = 0x3f -> div = 2048 */
+		*real_clk = mpc5xxx_get_bus_frequency(node) / 2048;
 		return -EINVAL;
+	}
 
 	/* Determine divider value */
 	divider = mpc5xxx_get_bus_frequency(node) / clock;
@@ -216,7 +223,8 @@ static int __devinit mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,
 			break;
 	}
 
-	return div ? (int)div->fdr : -EINVAL;
+	*real_clk = mpc5xxx_get_bus_frequency(node) / div->divider;
+	return (int)div->fdr;
 }
 
 static void __devinit mpc_i2c_setup_52xx(struct device_node *node,
@@ -231,13 +239,14 @@ static void __devinit mpc_i2c_setup_52xx(struct device_node *node,
 		return;
 	}
 
-	ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler);
+	ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler, &i2c->real_clk);
 	fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */
 
 	writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
 
 	if (ret >= 0)
-		dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr);
+		dev_info(i2c->dev, "clock %u Hz (fdr=%d)\n", i2c->real_clk,
+			 fdr);
 }
 #else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */
 static void __devinit mpc_i2c_setup_52xx(struct device_node *node,
@@ -334,14 +343,17 @@ static u32 __devinit mpc_i2c_get_sec_cfg_8xxx(void)
 }
 
 static int __devinit mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock,
-					  u32 prescaler)
+					  u32 prescaler, u32 *real_clk)
 {
 	const struct mpc_i2c_divider *div = NULL;
 	u32 divider;
 	int i;
 
-	if (clock == MPC_I2C_CLOCK_LEGACY)
+	if (clock == MPC_I2C_CLOCK_LEGACY) {
+		/* see below - default fdr = 0x1031 -> div = 16 * 3072 */
+		*real_clk = fsl_get_sys_freq() / prescaler / (16 * 3072);
 		return -EINVAL;
+	}
 
 	/* Determine proper divider value */
 	if (of_device_is_compatible(node, "fsl,mpc8544-i2c"))
@@ -364,6 +376,7 @@ static int __devinit mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock,
 			break;
 	}
 
+	*real_clk = fsl_get_sys_freq() / prescaler / div->divider;
 	return div ? (int)div->fdr : -EINVAL;
 }
 
@@ -380,7 +393,7 @@ static void __devinit mpc_i2c_setup_8xxx(struct device_node *node,
 		return;
 	}
 
-	ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler);
+	ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler, &i2c->real_clk);
 	fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */
 
 	writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
@@ -388,7 +401,7 @@ static void __devinit mpc_i2c_setup_8xxx(struct device_node *node,
 
 	if (ret >= 0)
 		dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n",
-			 clock, fdr >> 8, fdr & 0xff);
+			 i2c->real_clk, fdr >> 8, fdr & 0xff);
 }
 
 #else /* !CONFIG_FSL_SOC */
@@ -500,10 +513,14 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 			return -EINTR;
 		}
 		if (time_after(jiffies, orig_jiffies + HZ)) {
+			u8 status = readb(i2c->base + MPC_I2C_SR);
+
 			dev_dbg(i2c->dev, "timeout\n");
-			if (readb(i2c->base + MPC_I2C_SR) ==
-			    (CSR_MCF | CSR_MBB | CSR_RXAK))
+			if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) {
+				writeb(status & ~CSR_MAL,
+				       i2c->base + MPC_I2C_SR);
 				mpc_i2c_fixup(i2c);
+			}
 			return -EIO;
 		}
 		schedule();
@@ -595,6 +612,14 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
 			mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock, 0);
 	}
 
+	prop = of_get_property(op->dev.of_node, "fsl,timeout", &plen);
+	if (prop && plen == sizeof(u32)) {
+		mpc_ops.timeout = *prop * HZ / 1000000;
+		if (mpc_ops.timeout < 5)
+			mpc_ops.timeout = 5;
+	}
+	dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ);
+
 	dev_set_drvdata(&op->dev, i2c);
 
 	i2c->adap = mpc_ops;
diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h
index 847f4aad7ed..5d48bb66aa7 100644
--- a/drivers/input/serio/i8042-io.h
+++ b/drivers/input/serio/i8042-io.h
@@ -27,6 +27,11 @@
 #include <asm/irq.h>
 #elif defined(CONFIG_SH_CAYMAN)
 #include <asm/irq.h>
+#elif defined(CONFIG_PPC)
+extern int of_i8042_kbd_irq;
+extern int of_i8042_aux_irq;
+# define I8042_KBD_IRQ  of_i8042_kbd_irq
+# define I8042_AUX_IRQ  of_i8042_aux_irq
 #else
 # define I8042_KBD_IRQ	1
 # define I8042_AUX_IRQ	12
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index f22bc9f05dd..6629d09f3b3 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -321,7 +321,7 @@ config MTD_CFI_FLAGADM
 
 config MTD_REDWOOD
 	tristate "CFI Flash devices mapped on IBM Redwood"
-	depends on MTD_CFI && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 )
+	depends on MTD_CFI
 	help
 	  This enables access routines for the flash chips on the IBM
 	  Redwood board. If you have one of these boards and would like to
diff --git a/drivers/mtd/maps/redwood.c b/drivers/mtd/maps/redwood.c
index 933c0b63b01..d2c9db00db0 100644
--- a/drivers/mtd/maps/redwood.c
+++ b/drivers/mtd/maps/redwood.c
@@ -22,8 +22,6 @@
 
 #include <asm/io.h>
 
-#if !defined (CONFIG_REDWOOD_6)
-
 #define WINDOW_ADDR 0xffc00000
 #define WINDOW_SIZE 0x00400000
 
@@ -69,47 +67,6 @@ static struct mtd_partition redwood_flash_partitions[] = {
 	}
 };
 
-#else /* CONFIG_REDWOOD_6 */
-/* FIXME: the window is bigger - armin */
-#define WINDOW_ADDR 0xff800000
-#define WINDOW_SIZE 0x00800000
-
-#define RW_PART0_OF	0
-#define RW_PART0_SZ	0x400000	/* 4 MiB data */
-#define RW_PART1_OF	RW_PART0_OF + RW_PART0_SZ
-#define RW_PART1_SZ	0x10000		/* 64K VPD */
-#define RW_PART2_OF	RW_PART1_OF + RW_PART1_SZ
-#define RW_PART2_SZ	0x400000 - (0x10000 + 0x20000)
-#define RW_PART3_OF	RW_PART2_OF + RW_PART2_SZ
-#define RW_PART3_SZ	0x20000
-
-static struct mtd_partition redwood_flash_partitions[] = {
-	{
-		.name = "Redwood filesystem",
-		.offset = RW_PART0_OF,
-		.size = RW_PART0_SZ
-	},
-	{
-		.name = "Redwood OpenBIOS Vital Product Data",
-		.offset = RW_PART1_OF,
-		.size = RW_PART1_SZ,
-		.mask_flags = MTD_WRITEABLE	/* force read-only */
-	},
-	{
-		.name = "Redwood kernel",
-		.offset = RW_PART2_OF,
-		.size = RW_PART2_SZ
-	},
-	{
-		.name = "Redwood OpenBIOS",
-		.offset = RW_PART3_OF,
-		.size = RW_PART3_SZ,
-		.mask_flags = MTD_WRITEABLE	/* force read-only */
-	}
-};
-
-#endif /* CONFIG_REDWOOD_6 */
-
 struct map_info redwood_flash_map = {
 	.name = "IBM Redwood",
 	.size = WINDOW_SIZE,
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 23c13180ff1..5a6895320b4 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -914,7 +914,7 @@ config SMC91X
 	tristate "SMC 91C9x/91C1xxx support"
 	select CRC32
 	select MII
-	depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \
+	depends on ARM || M32R || SUPERH || \
 		MIPS || BLACKFIN || MN10300 || COLDFIRE
 	help
 	  This is a driver for SMC's 91x series of Ethernet chipsets,
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 8d2772cc42f..ee747919a76 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -83,43 +83,6 @@ static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 	}
 }
 
-#elif defined(CONFIG_REDWOOD_5) || defined(CONFIG_REDWOOD_6)
-
-/* We can only do 16-bit reads and writes in the static memory space. */
-#define SMC_CAN_USE_8BIT	0
-#define SMC_CAN_USE_16BIT	1
-#define SMC_CAN_USE_32BIT	0
-#define SMC_NOWAIT		1
-
-#define SMC_IO_SHIFT		0
-
-#define SMC_inw(a, r)		in_be16((volatile u16 *)((a) + (r)))
-#define SMC_outw(v, a, r)	out_be16((volatile u16 *)((a) + (r)), v)
-#define SMC_insw(a, r, p, l) 						\
-	do {								\
-		unsigned long __port = (a) + (r);			\
-		u16 *__p = (u16 *)(p);					\
-		int __l = (l);						\
-		insw(__port, __p, __l);					\
-		while (__l > 0) {					\
-			*__p = swab16(*__p);				\
-			__p++;						\
-			__l--;						\
-		}							\
-	} while (0)
-#define SMC_outsw(a, r, p, l) 						\
-	do {								\
-		unsigned long __port = (a) + (r);			\
-		u16 *__p = (u16 *)(p);					\
-		int __l = (l);						\
-		while (__l > 0) {					\
-			/* Believe it or not, the swab isn't needed. */	\
-			outw( /* swab16 */ (*__p++), __port);		\
-			__l--;						\
-		}							\
-	} while (0)
-#define SMC_IRQ_FLAGS		(0)
-
 #elif defined(CONFIG_SA1100_PLEB)
 /* We can only do 16-bit reads and writes in the static memory space. */
 #define SMC_CAN_USE_8BIT	1
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 84a35f69901..1a88b363005 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -113,7 +113,9 @@ struct psc_ops {
 	unsigned char	(*read_char)(struct uart_port *port);
 	void		(*cw_disable_ints)(struct uart_port *port);
 	void		(*cw_restore_ints)(struct uart_port *port);
-	unsigned long	(*getuartclk)(void *p);
+	unsigned int	(*set_baudrate)(struct uart_port *port,
+					struct ktermios *new,
+					struct ktermios *old);
 	int		(*clock)(struct uart_port *port, int enable);
 	int		(*fifoc_init)(void);
 	void		(*fifoc_uninit)(void);
@@ -121,6 +123,16 @@ struct psc_ops {
 	irqreturn_t	(*handle_irq)(struct uart_port *port);
 };
 
+/* setting the prescaler and divisor reg is common for all chips */
+static inline void mpc52xx_set_divisor(struct mpc52xx_psc __iomem *psc,
+				       u16 prescaler, unsigned int divisor)
+{
+	/* select prescaler */
+	out_be16(&psc->mpc52xx_psc_clock_select, prescaler);
+	out_8(&psc->ctur, divisor >> 8);
+	out_8(&psc->ctlr, divisor & 0xff);
+}
+
 #ifdef CONFIG_PPC_MPC52xx
 #define FIFO_52xx(port) ((struct mpc52xx_psc_fifo __iomem *)(PSC(port)+1))
 static void mpc52xx_psc_fifo_init(struct uart_port *port)
@@ -128,9 +140,6 @@ static void mpc52xx_psc_fifo_init(struct uart_port *port)
 	struct mpc52xx_psc __iomem *psc = PSC(port);
 	struct mpc52xx_psc_fifo __iomem *fifo = FIFO_52xx(port);
 
-	/* /32 prescaler */
-	out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00);
-
 	out_8(&fifo->rfcntl, 0x00);
 	out_be16(&fifo->rfalarm, 0x1ff);
 	out_8(&fifo->tfcntl, 0x07);
@@ -219,15 +228,47 @@ static void mpc52xx_psc_cw_restore_ints(struct uart_port *port)
 	out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
 }
 
-/* Search for bus-frequency property in this node or a parent */
-static unsigned long mpc52xx_getuartclk(void *p)
+static unsigned int mpc5200_psc_set_baudrate(struct uart_port *port,
+					     struct ktermios *new,
+					     struct ktermios *old)
 {
-	/*
-	 * 5200 UARTs have a / 32 prescaler
-	 * but the generic serial code assumes 16
-	 * so return ipb freq / 2
-	 */
-	return mpc5xxx_get_bus_frequency(p) / 2;
+	unsigned int baud;
+	unsigned int divisor;
+
+	/* The 5200 has a fixed /32 prescaler, uartclk contains the ipb freq */
+	baud = uart_get_baud_rate(port, new, old,
+				  port->uartclk / (32 * 0xffff) + 1,
+				  port->uartclk / 32);
+	divisor = (port->uartclk + 16 * baud) / (32 * baud);
+
+	/* enable the /32 prescaler and set the divisor */
+	mpc52xx_set_divisor(PSC(port), 0xdd00, divisor);
+	return baud;
+}
+
+static unsigned int mpc5200b_psc_set_baudrate(struct uart_port *port,
+					      struct ktermios *new,
+					      struct ktermios *old)
+{
+	unsigned int baud;
+	unsigned int divisor;
+	u16 prescaler;
+
+	/* The 5200B has a selectable /4 or /32 prescaler, uartclk contains the
+	 * ipb freq */
+	baud = uart_get_baud_rate(port, new, old,
+				  port->uartclk / (32 * 0xffff) + 1,
+				  port->uartclk / 4);
+	divisor = (port->uartclk + 2 * baud) / (4 * baud);
+
+	/* select the proper prescaler and set the divisor */
+	if (divisor > 0xffff) {
+		divisor = (divisor + 4) / 8;
+		prescaler = 0xdd00; /* /32 */
+	} else
+		prescaler = 0xff00; /* /4 */
+	mpc52xx_set_divisor(PSC(port), prescaler, divisor);
+	return baud;
 }
 
 static void mpc52xx_psc_get_irq(struct uart_port *port, struct device_node *np)
@@ -258,7 +299,28 @@ static struct psc_ops mpc52xx_psc_ops = {
 	.read_char = mpc52xx_psc_read_char,
 	.cw_disable_ints = mpc52xx_psc_cw_disable_ints,
 	.cw_restore_ints = mpc52xx_psc_cw_restore_ints,
-	.getuartclk = mpc52xx_getuartclk,
+	.set_baudrate = mpc5200_psc_set_baudrate,
+	.get_irq = mpc52xx_psc_get_irq,
+	.handle_irq = mpc52xx_psc_handle_irq,
+};
+
+static struct psc_ops mpc5200b_psc_ops = {
+	.fifo_init = mpc52xx_psc_fifo_init,
+	.raw_rx_rdy = mpc52xx_psc_raw_rx_rdy,
+	.raw_tx_rdy = mpc52xx_psc_raw_tx_rdy,
+	.rx_rdy = mpc52xx_psc_rx_rdy,
+	.tx_rdy = mpc52xx_psc_tx_rdy,
+	.tx_empty = mpc52xx_psc_tx_empty,
+	.stop_rx = mpc52xx_psc_stop_rx,
+	.start_tx = mpc52xx_psc_start_tx,
+	.stop_tx = mpc52xx_psc_stop_tx,
+	.rx_clr_irq = mpc52xx_psc_rx_clr_irq,
+	.tx_clr_irq = mpc52xx_psc_tx_clr_irq,
+	.write_char = mpc52xx_psc_write_char,
+	.read_char = mpc52xx_psc_read_char,
+	.cw_disable_ints = mpc52xx_psc_cw_disable_ints,
+	.cw_restore_ints = mpc52xx_psc_cw_restore_ints,
+	.set_baudrate = mpc5200b_psc_set_baudrate,
 	.get_irq = mpc52xx_psc_get_irq,
 	.handle_irq = mpc52xx_psc_handle_irq,
 };
@@ -392,9 +454,35 @@ static void mpc512x_psc_cw_restore_ints(struct uart_port *port)
 	out_be32(&FIFO_512x(port)->rximr, port->read_status_mask & 0x7f);
 }
 
-static unsigned long mpc512x_getuartclk(void *p)
+static unsigned int mpc512x_psc_set_baudrate(struct uart_port *port,
+					     struct ktermios *new,
+					     struct ktermios *old)
 {
-	return mpc5xxx_get_bus_frequency(p);
+	unsigned int baud;
+	unsigned int divisor;
+
+	/*
+	 * The "MPC5121e Microcontroller Reference Manual, Rev. 3" says on
+	 * pg. 30-10 that the chip supports a /32 and a /10 prescaler.
+	 * Furthermore, it states that "After reset, the prescaler by 10
+	 * for the UART mode is selected", but the reset register value is
+	 * 0x0000 which means a /32 prescaler. This is wrong.
+	 *
+	 * In reality using /32 prescaler doesn't work, as it is not supported!
+	 * Use /16 or /10 prescaler, see "MPC5121e Hardware Design Guide",
+	 * Chapter 4.1 PSC in UART Mode.
+	 * Calculate with a /16 prescaler here.
+	 */
+
+	/* uartclk contains the ips freq */
+	baud = uart_get_baud_rate(port, new, old,
+				  port->uartclk / (16 * 0xffff) + 1,
+				  port->uartclk / 16);
+	divisor = (port->uartclk + 8 * baud) / (16 * baud);
+
+	/* enable the /16 prescaler and set the divisor */
+	mpc52xx_set_divisor(PSC(port), 0xdd00, divisor);
+	return baud;
 }
 
 /* Init PSC FIFO Controller */
@@ -498,7 +586,7 @@ static struct psc_ops mpc512x_psc_ops = {
 	.read_char = mpc512x_psc_read_char,
 	.cw_disable_ints = mpc512x_psc_cw_disable_ints,
 	.cw_restore_ints = mpc512x_psc_cw_restore_ints,
-	.getuartclk = mpc512x_getuartclk,
+	.set_baudrate = mpc512x_psc_set_baudrate,
 	.clock = mpc512x_psc_clock,
 	.fifoc_init = mpc512x_psc_fifoc_init,
 	.fifoc_uninit = mpc512x_psc_fifoc_uninit,
@@ -666,8 +754,8 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
 	struct mpc52xx_psc __iomem *psc = PSC(port);
 	unsigned long flags;
 	unsigned char mr1, mr2;
-	unsigned short ctr;
-	unsigned int j, baud, quot;
+	unsigned int j;
+	unsigned int baud;
 
 	/* Prepare what we're gonna write */
 	mr1 = 0;
@@ -704,16 +792,9 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
 		mr2 |= MPC52xx_PSC_MODE_TXCTS;
 	}
 
-	baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
-	quot = uart_get_divisor(port, baud);
-	ctr = quot & 0xffff;
-
 	/* Get the lock */
 	spin_lock_irqsave(&port->lock, flags);
 
-	/* Update the per-port timeout */
-	uart_update_timeout(port, new->c_cflag, baud);
-
 	/* Do our best to flush TX & RX, so we don't lose anything */
 	/* But we don't wait indefinitely ! */
 	j = 5000000;	/* Maximum wait */
@@ -737,8 +818,10 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
 	out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
 	out_8(&psc->mode, mr1);
 	out_8(&psc->mode, mr2);
-	out_8(&psc->ctur, ctr >> 8);
-	out_8(&psc->ctlr, ctr & 0xff);
+	baud = psc_ops->set_baudrate(port, new, old);
+
+	/* Update the per-port timeout */
+	uart_update_timeout(port, new->c_cflag, baud);
 
 	if (UART_ENABLE_MS(port, new->c_cflag))
 		mpc52xx_uart_enable_ms(port);
@@ -1118,7 +1201,7 @@ mpc52xx_console_setup(struct console *co, char *options)
 		return ret;
 	}
 
-	uartclk = psc_ops->getuartclk(np);
+	uartclk = mpc5xxx_get_bus_frequency(np);
 	if (uartclk == 0) {
 		pr_debug("Could not find uart clock frequency!\n");
 		return -EINVAL;
@@ -1201,6 +1284,7 @@ static struct uart_driver mpc52xx_uart_driver = {
 
 static struct of_device_id mpc52xx_uart_of_match[] = {
 #ifdef CONFIG_PPC_MPC52xx
+	{ .compatible = "fsl,mpc5200b-psc-uart", .data = &mpc5200b_psc_ops, },
 	{ .compatible = "fsl,mpc5200-psc-uart", .data = &mpc52xx_psc_ops, },
 	/* binding used by old lite5200 device trees: */
 	{ .compatible = "mpc5200-psc-uart", .data = &mpc52xx_psc_ops, },
@@ -1233,7 +1317,10 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
 	pr_debug("Found %s assigned to ttyPSC%x\n",
 		 mpc52xx_uart_nodes[idx]->full_name, idx);
 
-	uartclk = psc_ops->getuartclk(op->dev.of_node);
+	/* set the uart clock to the input clock of the psc, the different
+	 * prescalers are taken into account in the set_baudrate() methods
+	 * of the respective chip */
+	uartclk = mpc5xxx_get_bus_frequency(op->dev.of_node);
 	if (uartclk == 0) {
 		dev_dbg(&op->dev, "Could not find uart clock frequency!\n");
 		return -EINVAL;
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 9e711a1d0d9..7b11ea68c80 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1871,6 +1871,7 @@ config FB_MBX_DEBUG
 config FB_FSL_DIU
 	tristate "Freescale DIU framebuffer support"
 	depends on FB && FSL_SOC
+	select FB_MODE_HELPERS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index 27455ce298b..e38ad222454 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -34,7 +34,8 @@
 #include <linux/of_platform.h>
 
 #include <sysdev/fsl_soc.h>
-#include "fsl-diu-fb.h"
+#include <linux/fsl-diu-fb.h>
+#include "edid.h"
 
 /*
  * These parameters give default parameters
@@ -217,6 +218,7 @@ struct mfb_info {
 	int x_aoi_d;		/* aoi display x offset to physical screen */
 	int y_aoi_d;		/* aoi display y offset to physical screen */
 	struct fsl_diu_data *parent;
+	u8 *edid_data;
 };
 
 
@@ -317,6 +319,17 @@ static void fsl_diu_free(void *virt, size_t size)
 		free_pages_exact(virt, size);
 }
 
+/*
+ * Workaround for failed writing desc register of planes.
+ * Needed with MPC5121 DIU rev 2.0 silicon.
+ */
+void wr_reg_wa(u32 *reg, u32 val)
+{
+	do {
+		out_be32(reg, val);
+	} while (in_be32(reg) != val);
+}
+
 static int fsl_diu_enable_panel(struct fb_info *info)
 {
 	struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par;
@@ -330,7 +343,7 @@ static int fsl_diu_enable_panel(struct fb_info *info)
 		switch (mfbi->index) {
 		case 0:				/* plane 0 */
 			if (hw->desc[0] != ad->paddr)
-				out_be32(&hw->desc[0], ad->paddr);
+				wr_reg_wa(&hw->desc[0], ad->paddr);
 			break;
 		case 1:				/* plane 1 AOI 0 */
 			cmfbi = machine_data->fsl_diu_info[2]->par;
@@ -340,7 +353,7 @@ static int fsl_diu_enable_panel(struct fb_info *info)
 						cpu_to_le32(cmfbi->ad->paddr);
 				else
 					ad->next_ad = 0;
-				out_be32(&hw->desc[1], ad->paddr);
+				wr_reg_wa(&hw->desc[1], ad->paddr);
 			}
 			break;
 		case 3:				/* plane 2 AOI 0 */
@@ -351,14 +364,14 @@ static int fsl_diu_enable_panel(struct fb_info *info)
 						cpu_to_le32(cmfbi->ad->paddr);
 				else
 					ad->next_ad = 0;
-				out_be32(&hw->desc[2], ad->paddr);
+				wr_reg_wa(&hw->desc[2], ad->paddr);
 			}
 			break;
 		case 2:				/* plane 1 AOI 1 */
 			pmfbi = machine_data->fsl_diu_info[1]->par;
 			ad->next_ad = 0;
 			if (hw->desc[1] == machine_data->dummy_ad->paddr)
-				out_be32(&hw->desc[1], ad->paddr);
+				wr_reg_wa(&hw->desc[1], ad->paddr);
 			else					/* AOI0 open */
 				pmfbi->ad->next_ad = cpu_to_le32(ad->paddr);
 			break;
@@ -366,7 +379,7 @@ static int fsl_diu_enable_panel(struct fb_info *info)
 			pmfbi = machine_data->fsl_diu_info[3]->par;
 			ad->next_ad = 0;
 			if (hw->desc[2] == machine_data->dummy_ad->paddr)
-				out_be32(&hw->desc[2], ad->paddr);
+				wr_reg_wa(&hw->desc[2], ad->paddr);
 			else				/* AOI0 was open */
 				pmfbi->ad->next_ad = cpu_to_le32(ad->paddr);
 			break;
@@ -390,27 +403,24 @@ static int fsl_diu_disable_panel(struct fb_info *info)
 	switch (mfbi->index) {
 	case 0:					/* plane 0 */
 		if (hw->desc[0] != machine_data->dummy_ad->paddr)
-			out_be32(&hw->desc[0],
-				machine_data->dummy_ad->paddr);
+			wr_reg_wa(&hw->desc[0], machine_data->dummy_ad->paddr);
 		break;
 	case 1:					/* plane 1 AOI 0 */
 		cmfbi = machine_data->fsl_diu_info[2]->par;
 		if (cmfbi->count > 0)	/* AOI1 is open */
-			out_be32(&hw->desc[1], cmfbi->ad->paddr);
+			wr_reg_wa(&hw->desc[1], cmfbi->ad->paddr);
 					/* move AOI1 to the first */
 		else			/* AOI1 was closed */
-			out_be32(&hw->desc[1],
-				machine_data->dummy_ad->paddr);
+			wr_reg_wa(&hw->desc[1], machine_data->dummy_ad->paddr);
 					/* close AOI 0 */
 		break;
 	case 3:					/* plane 2 AOI 0 */
 		cmfbi = machine_data->fsl_diu_info[4]->par;
 		if (cmfbi->count > 0)	/* AOI1 is open */
-			out_be32(&hw->desc[2], cmfbi->ad->paddr);
+			wr_reg_wa(&hw->desc[2], cmfbi->ad->paddr);
 					/* move AOI1 to the first */
 		else			/* AOI1 was closed */
-			out_be32(&hw->desc[2],
-				machine_data->dummy_ad->paddr);
+			wr_reg_wa(&hw->desc[2], machine_data->dummy_ad->paddr);
 					/* close AOI 0 */
 		break;
 	case 2:					/* plane 1 AOI 1 */
@@ -421,7 +431,7 @@ static int fsl_diu_disable_panel(struct fb_info *info)
 					/* AOI0 is open, must be the first */
 				pmfbi->ad->next_ad = 0;
 		} else			/* AOI1 is the first in the chain */
-			out_be32(&hw->desc[1], machine_data->dummy_ad->paddr);
+			wr_reg_wa(&hw->desc[1], machine_data->dummy_ad->paddr);
 					/* close AOI 1 */
 		break;
 	case 4:					/* plane 2 AOI 1 */
@@ -432,7 +442,7 @@ static int fsl_diu_disable_panel(struct fb_info *info)
 				/* AOI0 is open, must be the first */
 				pmfbi->ad->next_ad = 0;
 		} else		/* AOI1 is the first in the chain */
-			out_be32(&hw->desc[2], machine_data->dummy_ad->paddr);
+			wr_reg_wa(&hw->desc[2], machine_data->dummy_ad->paddr);
 				/* close AOI 1 */
 		break;
 	default:
@@ -1100,6 +1110,10 @@ static int fsl_diu_open(struct fb_info *info, int user)
 	struct mfb_info *mfbi = info->par;
 	int res = 0;
 
+	/* free boot splash memory on first /dev/fb0 open */
+	if (!mfbi->index && diu_ops.release_bootmem)
+		diu_ops.release_bootmem();
+
 	spin_lock(&diu_lock);
 	mfbi->count++;
 	if (mfbi->count == 1) {
@@ -1173,18 +1187,30 @@ static int __devinit install_fb(struct fb_info *info)
 	int rc;
 	struct mfb_info *mfbi = info->par;
 	const char *aoi_mode, *init_aoi_mode = "320x240";
+	struct fb_videomode *db = fsl_diu_mode_db;
+	unsigned int dbsize = ARRAY_SIZE(fsl_diu_mode_db);
+	int has_default_mode = 1;
 
 	if (init_fbinfo(info))
 		return -EINVAL;
 
-	if (mfbi->index == 0)	/* plane 0 */
+	if (mfbi->index == 0) {	/* plane 0 */
+		if (mfbi->edid_data) {
+			/* Now build modedb from EDID */
+			fb_edid_to_monspecs(mfbi->edid_data, &info->monspecs);
+			fb_videomode_to_modelist(info->monspecs.modedb,
+						 info->monspecs.modedb_len,
+						 &info->modelist);
+			db = info->monspecs.modedb;
+			dbsize = info->monspecs.modedb_len;
+		}
 		aoi_mode = fb_mode;
-	else
+	} else {
 		aoi_mode = init_aoi_mode;
+	}
 	pr_debug("mode used = %s\n", aoi_mode);
-	rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db,
-	     ARRAY_SIZE(fsl_diu_mode_db), &fsl_diu_default_mode, default_bpp);
-
+	rc = fb_find_mode(&info->var, info, aoi_mode, db, dbsize,
+			  &fsl_diu_default_mode, default_bpp);
 	switch (rc) {
 	case 1:
 		pr_debug("using mode specified in @mode\n");
@@ -1202,10 +1228,50 @@ static int __devinit install_fb(struct fb_info *info)
 	default:
 		pr_debug("rc = %d\n", rc);
 		pr_debug("failed to find mode\n");
-		return -EINVAL;
+		/*
+		 * For plane 0 we continue and look into
+		 * driver's internal modedb.
+		 */
+		if (mfbi->index == 0 && mfbi->edid_data)
+			has_default_mode = 0;
+		else
+			return -EINVAL;
 		break;
 	}
 
+	if (!has_default_mode) {
+		rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db,
+				  ARRAY_SIZE(fsl_diu_mode_db),
+				  &fsl_diu_default_mode,
+				  default_bpp);
+		if (rc > 0 && rc < 5)
+			has_default_mode = 1;
+	}
+
+	/* Still not found, use preferred mode from database if any */
+	if (!has_default_mode && info->monspecs.modedb) {
+		struct fb_monspecs *specs = &info->monspecs;
+		struct fb_videomode *modedb = &specs->modedb[0];
+
+		/*
+		 * Get preferred timing. If not found,
+		 * first mode in database will be used.
+		 */
+		if (specs->misc & FB_MISC_1ST_DETAIL) {
+			int i;
+
+			for (i = 0; i < specs->modedb_len; i++) {
+				if (specs->modedb[i].flag & FB_MODE_IS_FIRST) {
+					modedb = &specs->modedb[i];
+					break;
+				}
+			}
+		}
+
+		info->var.bits_per_pixel = default_bpp;
+		fb_videomode_to_var(&info->var, modedb);
+	}
+
 	pr_debug("xres_virtual %d\n", info->var.xres_virtual);
 	pr_debug("bits_per_pixel %d\n", info->var.bits_per_pixel);
 
@@ -1244,6 +1310,9 @@ static void uninstall_fb(struct fb_info *info)
 	if (!mfbi->registered)
 		return;
 
+	if (mfbi->index == 0)
+		kfree(mfbi->edid_data);
+
 	unregister_framebuffer(info);
 	unmap_video_memory(info);
 	if (&info->cmap)
@@ -1427,6 +1496,7 @@ static int __devinit fsl_diu_probe(struct of_device *ofdev,
 	int ret, i, error = 0;
 	struct resource res;
 	struct fsl_diu_data *machine_data;
+	int diu_mode;
 
 	machine_data = kzalloc(sizeof(struct fsl_diu_data), GFP_KERNEL);
 	if (!machine_data)
@@ -1443,6 +1513,17 @@ static int __devinit fsl_diu_probe(struct of_device *ofdev,
 		mfbi = machine_data->fsl_diu_info[i]->par;
 		memcpy(mfbi, &mfb_template[i], sizeof(struct mfb_info));
 		mfbi->parent = machine_data;
+
+		if (mfbi->index == 0) {
+			const u8 *prop;
+			int len;
+
+			/* Get EDID */
+			prop = of_get_property(np, "edid", &len);
+			if (prop && len == EDID_LENGTH)
+				mfbi->edid_data = kmemdup(prop, EDID_LENGTH,
+							  GFP_KERNEL);
+		}
 	}
 
 	ret = of_address_to_resource(np, 0, &res);
@@ -1463,7 +1544,9 @@ static int __devinit fsl_diu_probe(struct of_device *ofdev,
 		goto error2;
 	}
 
-	out_be32(&dr.diu_reg->diu_mode, 0);		/* disable DIU anyway*/
+	diu_mode = in_be32(&dr.diu_reg->diu_mode);
+	if (diu_mode != MFB_MODE1)
+		out_be32(&dr.diu_reg->diu_mode, 0);	/* disable DIU */
 
 	/* Get the IRQ of the DIU */
 	machine_data->irq = irq_of_parse_and_map(np, 0);
@@ -1511,7 +1594,13 @@ static int __devinit fsl_diu_probe(struct of_device *ofdev,
 	machine_data->dummy_ad->offset_xyd = 0;
 	machine_data->dummy_ad->next_ad = 0;
 
-	out_be32(&dr.diu_reg->desc[0], machine_data->dummy_ad->paddr);
+	/*
+	 * Let DIU display splash screen if it was pre-initialized
+	 * by the bootloader, set dummy area descriptor otherwise.
+	 */
+	if (diu_mode != MFB_MODE1)
+		out_be32(&dr.diu_reg->desc[0], machine_data->dummy_ad->paddr);
+
 	out_be32(&dr.diu_reg->desc[1], machine_data->dummy_ad->paddr);
 	out_be32(&dr.diu_reg->desc[2], machine_data->dummy_ad->paddr);
 
diff --git a/drivers/video/fsl-diu-fb.h b/drivers/video/fsl-diu-fb.h
deleted file mode 100644
index fc295d7ea46..00000000000
--- a/drivers/video/fsl-diu-fb.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- *  Freescale DIU Frame Buffer device driver
- *
- *  Authors: Hongjun Chen <hong-jun.chen@freescale.com>
- *           Paul Widmer <paul.widmer@freescale.com>
- *           Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
- *           York Sun <yorksun@freescale.com>
- *
- *   Based on imxfb.c Copyright (C) 2004 S.Hauer, Pengutronix
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __FSL_DIU_FB_H__
-#define __FSL_DIU_FB_H__
-
-/* Arbitrary threshold to determine the allocation method
- * See mpc8610fb_set_par(), map_video_memory(), and unmap_video_memory()
- */
-#define MEM_ALLOC_THRESHOLD (1024*768*4+32)
-/* Minimum value that the pixel clock can be set to in pico seconds
- * This is determined by platform clock/3 where the minimum platform
- * clock is 533MHz. This gives 5629 pico seconds.
- */
-#define MIN_PIX_CLK 5629
-#define MAX_PIX_CLK 96096
-
-#include <linux/types.h>
-
-struct mfb_alpha {
-	int enable;
-	int alpha;
-};
-
-struct mfb_chroma_key {
-	int enable;
-	__u8  red_max;
-	__u8  green_max;
-	__u8  blue_max;
-	__u8  red_min;
-	__u8  green_min;
-	__u8  blue_min;
-};
-
-struct aoi_display_offset {
-	int x_aoi_d;
-	int y_aoi_d;
-};
-
-#define MFB_SET_CHROMA_KEY	_IOW('M', 1, struct mfb_chroma_key)
-#define MFB_WAIT_FOR_VSYNC	_IOW('F', 0x20, u_int32_t)
-#define MFB_SET_BRIGHTNESS	_IOW('M', 3, __u8)
-
-#define MFB_SET_ALPHA		0x80014d00
-#define MFB_GET_ALPHA		0x40014d00
-#define MFB_SET_AOID		0x80084d04
-#define MFB_GET_AOID		0x40084d04
-#define MFB_SET_PIXFMT		0x80014d08
-#define MFB_GET_PIXFMT		0x40014d08
-
-#define FBIOGET_GWINFO		0x46E0
-#define FBIOPUT_GWINFO		0x46E1
-
-#ifdef __KERNEL__
-#include <linux/spinlock.h>
-
-/*
- * These are the fields of area descriptor(in DDR memory) for every plane
- */
-struct diu_ad {
-	/* Word 0(32-bit) in DDR memory */
-/* 	__u16 comp; */
-/* 	__u16 pixel_s:2; */
-/* 	__u16 pallete:1; */
-/* 	__u16 red_c:2; */
-/* 	__u16 green_c:2; */
-/* 	__u16 blue_c:2; */
-/* 	__u16 alpha_c:3; */
-/* 	__u16 byte_f:1; */
-/* 	__u16 res0:3; */
-
-	__be32 pix_fmt; /* hard coding pixel format */
-
-	/* Word 1(32-bit) in DDR memory */
-	__le32 addr;
-
-	/* Word 2(32-bit) in DDR memory */
-/* 	__u32 delta_xs:11; */
-/* 	__u32 res1:1; */
-/* 	__u32 delta_ys:11; */
-/* 	__u32 res2:1; */
-/* 	__u32 g_alpha:8; */
-	__le32 src_size_g_alpha;
-
-	/* Word 3(32-bit) in DDR memory */
-/* 	__u32 delta_xi:11; */
-/* 	__u32 res3:5; */
-/* 	__u32 delta_yi:11; */
-/* 	__u32 res4:3; */
-/* 	__u32 flip:2; */
-	__le32 aoi_size;
-
-	/* Word 4(32-bit) in DDR memory */
-	/*__u32 offset_xi:11;
-	__u32 res5:5;
-	__u32 offset_yi:11;
-	__u32 res6:5;
-	*/
-	__le32 offset_xyi;
-
-	/* Word 5(32-bit) in DDR memory */
-	/*__u32 offset_xd:11;
-	__u32 res7:5;
-	__u32 offset_yd:11;
-	__u32 res8:5; */
-	__le32 offset_xyd;
-
-
-	/* Word 6(32-bit) in DDR memory */
-	__u8 ckmax_r;
-	__u8 ckmax_g;
-	__u8 ckmax_b;
-	__u8 res9;
-
-	/* Word 7(32-bit) in DDR memory */
-	__u8 ckmin_r;
-	__u8 ckmin_g;
-	__u8 ckmin_b;
-	__u8 res10;
-/* 	__u32 res10:8; */
-
-	/* Word 8(32-bit) in DDR memory */
-	__le32 next_ad;
-
-	/* Word 9(32-bit) in DDR memory, just for 64-bit aligned */
-	__u32 paddr;
-} __attribute__ ((packed));
-
-/* DIU register map */
-struct diu {
-	__be32 desc[3];
-	__be32 gamma;
-	__be32 pallete;
-	__be32 cursor;
-	__be32 curs_pos;
-	__be32 diu_mode;
-	__be32 bgnd;
-	__be32 bgnd_wb;
-	__be32 disp_size;
-	__be32 wb_size;
-	__be32 wb_mem_addr;
-	__be32 hsyn_para;
-	__be32 vsyn_para;
-	__be32 syn_pol;
-	__be32 thresholds;
-	__be32 int_status;
-	__be32 int_mask;
-	__be32 colorbar[8];
-	__be32 filling;
-	__be32 plut;
-} __attribute__ ((packed));
-
-struct diu_hw {
-	struct diu *diu_reg;
-	spinlock_t reg_lock;
-
-	__u32 mode;		/* DIU operation mode */
-};
-
-struct diu_addr {
-	__u8 __iomem *vaddr;	/* Virtual address */
-	dma_addr_t paddr;	/* Physical address */
-	__u32 	   offset;
-};
-
-struct diu_pool {
-	struct diu_addr ad;
-	struct diu_addr gamma;
-	struct diu_addr pallete;
-	struct diu_addr cursor;
-};
-
-#define FSL_DIU_BASE_OFFSET	0x2C000	/* Offset of DIU */
-#define INT_LCDC		64	/* DIU interrupt number */
-
-#define FSL_AOI_NUM	6	/* 5 AOIs and one dummy AOI */
-				/* 1 for plane 0, 2 for plane 1&2 each */
-
-/* Minimum X and Y resolutions */
-#define MIN_XRES	64
-#define MIN_YRES	64
-
-/* HW cursor parameters */
-#define MAX_CURS		32
-
-/* Modes of operation of DIU */
-#define MFB_MODE0	0	/* DIU off */
-#define MFB_MODE1	1	/* All three planes output to display */
-#define MFB_MODE2	2	/* Plane 1 to display, planes 2+3 written back*/
-#define MFB_MODE3	3	/* All three planes written back to memory */
-#define MFB_MODE4	4	/* Color bar generation */
-
-/* INT_STATUS/INT_MASK field descriptions */
-#define INT_VSYNC	0x01	/* Vsync interrupt  */
-#define INT_VSYNC_WB	0x02	/* Vsync interrupt for write back operation */
-#define INT_UNDRUN	0x04	/* Under run exception interrupt */
-#define INT_PARERR	0x08	/* Display parameters error interrupt */
-#define INT_LS_BF_VS	0x10	/* Lines before vsync. interrupt */
-
-/* Panels'operation modes */
-#define MFB_TYPE_OUTPUT	0	/* Panel output to display */
-#define MFB_TYPE_OFF	1	/* Panel off */
-#define MFB_TYPE_WB	2	/* Panel written back to memory */
-#define MFB_TYPE_TEST	3	/* Panel generate color bar */
-
-#endif /* __KERNEL__ */
-#endif /* __FSL_DIU_FB_H__ */
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 574dc54e12d..29b5daacc21 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -485,6 +485,8 @@ static int __devexit xilinxfb_of_remove(struct of_device *op)
 /* Match table for of_platform binding */
 static struct of_device_id xilinxfb_of_match[] __devinitdata = {
 	{ .compatible = "xlnx,xps-tft-1.00.a", },
+	{ .compatible = "xlnx,xps-tft-2.00.a", },
+	{ .compatible = "xlnx,xps-tft-2.01.a", },
 	{ .compatible = "xlnx,plb-tft-cntlr-ref-1.00.a", },
 	{ .compatible = "xlnx,plb-dvi-cntlr-ref-1.00.c", },
 	{},