Merge tag 'xtensa-next-20121008' of git://github.com/czankel/xtensa-linux

Pull Xtensa patchset from Chris Zankel:
 "The Xtensa tree has been broken for some time now, and this patchset
  brings it back to life.  It has been part of the linux-next tree for
  some time.

  Most changes are inside the xtensa subdirectory; the other changes
  mostly add another rule to already existing #ifdefs to exclude Xtensa,
  where required.  The only 'common' change is to add two more sections
  ('.xt.prop' and '.xt.lit') to the white list in modpost."

* tag 'xtensa-next-20121008' of git://github.com/czankel/xtensa-linux: (27 commits)
  xtensa: Setup CROSS_COMPILE at the top
  xtensa: drop CONFIG_EMBEDDED_RAMDISK
  xtensa: fix TIOCGSERIAL and TIOCSSERIAL definitions
  xtensa: provide dummy gcc intrinsics
  xtensa: add missing symbol exports
  parport: disable for xtensa arch
  xtensa: rename MISC SR definition to avoid name clashes
  hisax: disable build for big-endian xtensa
  xtensa: fix CODA build
  xtensa: fix parallel make
  xtensa: ISS: drop unused io.c
  xtensa: ISS: exit simulator in case of halt or poweroff
  xtensa: ISS: change keyboard polling rate
  xtensa: ISS: add platform_pcibios_init
  xtensa: ISS: add dummy serial.h for ISS platform
  xtensa: change default platform clock frequency to 10MHz
  xtensa: add ARCH_WANT_OPTIONAL_GPIOLIB to xtensa config
  xtensa: set NO_IOPORT to 'n' by default
  xtensa: adopt generic io routines
  xtensa: fix ioremap
  ...

3 files changed, 8 insertions, 7 deletions

diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index 452fde9edf8..70ecd0c1950 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -109,7 +109,7 @@ config HISAX_16_3
 
 config HISAX_TELESPCI
 	bool "Teles PCI"
-	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
+	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
 	help
 	  This enables HiSax support for the Teles PCI.
 	  See <file:Documentation/isdn/README.HiSax> on how to configure it.
@@ -237,7 +237,7 @@ config HISAX_MIC
 
 config HISAX_NETJET
 	bool "NETjet card"
-	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
+	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
 	help
 	  This enables HiSax support for the NetJet from Traverse
 	  Technologies.
@@ -248,7 +248,7 @@ config HISAX_NETJET
 
 config HISAX_NETJET_U
 	bool "NETspider U card"
-	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
+	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
 	help
 	  This enables HiSax support for the Netspider U interface ISDN card
 	  from Traverse Technologies.
@@ -316,7 +316,7 @@ config HISAX_GAZEL
 
 config HISAX_HFC_PCI
 	bool "HFC PCI-Bus cards"
-	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
+	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
 	help
 	  This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
 
@@ -341,7 +341,7 @@ config HISAX_HFC_SX
 
 config HISAX_ENTERNOW_PCI
 	bool "Formula-n enter:now PCI card"
-	depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
+	depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
 	help
 	  This enables HiSax support for the Formula-n enter:now PCI
 	  ISDN card.
diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
index d92185a5523..4b6e4e7aca8 100644
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@ -36,7 +36,7 @@ if PARPORT
 config PARPORT_PC
 	tristate "PC-style hardware"
 	depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && \
-		(!M68K || ISA) && !MN10300 && !AVR32 && !BLACKFIN
+		(!M68K || ISA) && !MN10300 && !AVR32 && !BLACKFIN && !XTENSA
 	---help---
 	  You should say Y here if you have a PC-style parallel port. All
 	  IBM PC compatible computers and some Alphas have PC-style
diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
index f7c1c8e2dc3..565ad161783 100644
--- a/drivers/usb/musb/musb_io.h
+++ b/drivers/usb/musb/musb_io.h
@@ -40,7 +40,8 @@
 #if !defined(CONFIG_ARM) && !defined(CONFIG_SUPERH) \
 	&& !defined(CONFIG_AVR32) && !defined(CONFIG_PPC32) \
 	&& !defined(CONFIG_PPC64) && !defined(CONFIG_BLACKFIN) \
-	&& !defined(CONFIG_MIPS) && !defined(CONFIG_M68K)
+	&& !defined(CONFIG_MIPS) && !defined(CONFIG_M68K) \
+	&& !defined(CONFIG_XTENSA)
 static inline void readsl(const void __iomem *addr, void *buf, int len)
 	{ insl((unsigned long)addr, buf, len); }
 static inline void readsw(const void __iomem *addr, void *buf, int len)