EXYNOS5250: Add support cpufreq for EXYNOS5250

This patch adds support cpufreq for EXYNOS5250 SoC. Basically,
the exynos-cpufreq.c is used commonly and exynos5250-cpufreq.c
is used for EXYNOS5250(two Cortex-A15 cores) SoC.

Signed-off-by: Jaecheol Lee <jc.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Dave Jones <davej@redhat.com>

4 files changed, 357 insertions, 0 deletions

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 9b99a9672a5..2e3351526ff 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -48,6 +48,7 @@ config ARM_EXYNOS_CPUFREQ
 	depends on ARCH_EXYNOS
 	select ARM_EXYNOS4210_CPUFREQ if CPU_EXYNOS4210
 	select ARM_EXYNOS4X12_CPUFREQ if (SOC_EXYNOS4212 || SOC_EXYNOS4412)
+	select ARM_EXYNOS5250_CPUFREQ if SOC_EXYNOS5250
 	default y
 	help
 	  This adds the CPUFreq driver common part for Samsung
@@ -67,3 +68,9 @@ config ARM_EXYNOS4X12_CPUFREQ
 	help
 	  This adds the CPUFreq driver for Samsung EXYNOS4X12
 	  SoC (EXYNOS4212 or EXYNOS4412).
+
+config ARM_EXYNOS5250_CPUFREQ
+	bool "Samsung EXYNOS5250"
+	help
+	  This adds the CPUFreq driver for Samsung EXYNOS5250
+	  SoC.
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index f37bbccbc87..3cbbcd09c65 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS_CPUFREQ)	+= exynos-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ)	+= exynos4210-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ)	+= exynos4x12-cpufreq.o
+obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ)	+= exynos5250-cpufreq.o
 obj-$(CONFIG_ARCH_OMAP2PLUS)            += omap-cpufreq.o
 
 ##################################################################################
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index 2c63b68d5b2..b243a7ee01f 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -256,6 +256,8 @@ static int __init exynos_cpufreq_init(void)
 		ret = exynos4210_cpufreq_init(exynos_info);
 	else if (soc_is_exynos4212() || soc_is_exynos4412())
 		ret = exynos4x12_cpufreq_init(exynos_info);
+	else if (soc_is_exynos5250())
+		ret = exynos5250_cpufreq_init(exynos_info);
 	else
 		pr_err("%s: CPU type not found\n", __func__);
 
diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c
new file mode 100644
index 00000000000..a88331644eb
--- /dev/null
+++ b/drivers/cpufreq/exynos5250-cpufreq.c
@@ -0,0 +1,347 @@
+/*
+ * Copyright (c) 2010-20122Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * EXYNOS5250 - CPU frequency scaling support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/cpufreq.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/cpufreq.h>
+
+#define CPUFREQ_LEVEL_END	(L15 + 1)
+
+static int max_support_idx;
+static int min_support_idx = (CPUFREQ_LEVEL_END - 1);
+static struct clk *cpu_clk;
+static struct clk *moutcore;
+static struct clk *mout_mpll;
+static struct clk *mout_apll;
+
+struct cpufreq_clkdiv {
+	unsigned int	index;
+	unsigned int	clkdiv;
+	unsigned int	clkdiv1;
+};
+
+static unsigned int exynos5250_volt_table[CPUFREQ_LEVEL_END];
+
+static struct cpufreq_frequency_table exynos5250_freq_table[] = {
+	{L0, 1700 * 1000},
+	{L1, 1600 * 1000},
+	{L2, 1500 * 1000},
+	{L3, 1400 * 1000},
+	{L4, 1300 * 1000},
+	{L5, 1200 * 1000},
+	{L6, 1100 * 1000},
+	{L7, 1000 * 1000},
+	{L8, 900 * 1000},
+	{L9, 800 * 1000},
+	{L10, 700 * 1000},
+	{L11, 600 * 1000},
+	{L12, 500 * 1000},
+	{L13, 400 * 1000},
+	{L14, 300 * 1000},
+	{L15, 200 * 1000},
+	{0, CPUFREQ_TABLE_END},
+};
+
+static struct cpufreq_clkdiv exynos5250_clkdiv_table[CPUFREQ_LEVEL_END];
+
+static unsigned int clkdiv_cpu0_5250[CPUFREQ_LEVEL_END][8] = {
+	/*
+	 * Clock divider value for following
+	 * { ARM, CPUD, ACP, PERIPH, ATB, PCLK_DBG, APLL, ARM2 }
+	 */
+	{ 0, 3, 7, 7, 6, 1, 3, 0 },	/* 1700 MHz - N/A */
+	{ 0, 3, 7, 7, 6, 1, 3, 0 },	/* 1600 MHz - N/A */
+	{ 0, 3, 7, 7, 5, 1, 3, 0 },	/* 1500 MHz - N/A */
+	{ 0, 3, 7, 7, 6, 1, 3, 0 },	/* 1400 MHz */
+	{ 0, 3, 7, 7, 6, 1, 3, 0 },	/* 1300 MHz */
+	{ 0, 3, 7, 7, 5, 1, 3, 0 },	/* 1200 MHz */
+	{ 0, 2, 7, 7, 5, 1, 2, 0 },	/* 1100 MHz */
+	{ 0, 2, 7, 7, 4, 1, 2, 0 },	/* 1000 MHz */
+	{ 0, 2, 7, 7, 4, 1, 2, 0 },	/* 900 MHz */
+	{ 0, 2, 7, 7, 3, 1, 1, 0 },	/* 800 MHz */
+	{ 0, 1, 7, 7, 3, 1, 1, 0 },	/* 700 MHz */
+	{ 0, 1, 7, 7, 2, 1, 1, 0 },	/* 600 MHz */
+	{ 0, 1, 7, 7, 2, 1, 1, 0 },	/* 500 MHz */
+	{ 0, 1, 7, 7, 1, 1, 1, 0 },	/* 400 MHz */
+	{ 0, 1, 7, 7, 1, 1, 1, 0 },	/* 300 MHz */
+	{ 0, 1, 7, 7, 1, 1, 1, 0 },	/* 200 MHz */
+};
+
+static unsigned int clkdiv_cpu1_5250[CPUFREQ_LEVEL_END][2] = {
+	/* Clock divider value for following
+	 * { COPY, HPM }
+	 */
+	{ 0, 2 },	/* 1700 MHz - N/A */
+	{ 0, 2 },	/* 1600 MHz - N/A */
+	{ 0, 2 },	/* 1500 MHz - N/A */
+	{ 0, 2 },	/* 1400 MHz */
+	{ 0, 2 },	/* 1300 MHz */
+	{ 0, 2 },	/* 1200 MHz */
+	{ 0, 2 },	/* 1100 MHz */
+	{ 0, 2 },	/* 1000 MHz */
+	{ 0, 2 },	/* 900 MHz */
+	{ 0, 2 },	/* 800 MHz */
+	{ 0, 2 },	/* 700 MHz */
+	{ 0, 2 },	/* 600 MHz */
+	{ 0, 2 },	/* 500 MHz */
+	{ 0, 2 },	/* 400 MHz */
+	{ 0, 2 },	/* 300 MHz */
+	{ 0, 2 },	/* 200 MHz */
+};
+
+static unsigned int exynos5_apll_pms_table[CPUFREQ_LEVEL_END] = {
+	(0),				/* 1700 MHz - N/A */
+	(0),				/* 1600 MHz - N/A */
+	(0),				/* 1500 MHz - N/A */
+	(0),				/* 1400 MHz */
+	((325 << 16) | (6 << 8) | 0),	/* 1300 MHz */
+	((200 << 16) | (4 << 8) | 0),	/* 1200 MHz */
+	((275 << 16) | (6 << 8) | 0),	/* 1100 MHz */
+	((125 << 16) | (3 << 8) | 0),	/* 1000 MHz */
+	((150 << 16) | (4 << 8) | 0),	/* 900 MHz */
+	((100 << 16) | (3 << 8) | 0),	/* 800 MHz */
+	((175 << 16) | (3 << 8) | 1),	/* 700 MHz */
+	((200 << 16) | (4 << 8) | 1),	/* 600 MHz */
+	((125 << 16) | (3 << 8) | 1),	/* 500 MHz */
+	((100 << 16) | (3 << 8) | 1),	/* 400 MHz */
+	((200 << 16) | (4 << 8) | 2),	/* 300 MHz */
+	((100 << 16) | (3 << 8) | 2),	/* 200 MHz */
+};
+
+/* ASV group voltage table */
+static const unsigned int asv_voltage_5250[CPUFREQ_LEVEL_END] = {
+	0, 0, 0, 0, 0, 0, 0,	/* 1700 MHz ~ 1100 MHz Not supported */
+	1175000, 1125000, 1075000, 1050000, 1000000,
+	950000, 925000, 925000, 900000
+};
+
+static void set_clkdiv(unsigned int div_index)
+{
+	unsigned int tmp;
+
+	/* Change Divider - CPU0 */
+
+	tmp = exynos5250_clkdiv_table[div_index].clkdiv;
+
+	__raw_writel(tmp, EXYNOS5_CLKDIV_CPU0);
+
+	while (__raw_readl(EXYNOS5_CLKDIV_STATCPU0) & 0x11111111)
+		cpu_relax();
+
+	/* Change Divider - CPU1 */
+	tmp = exynos5250_clkdiv_table[div_index].clkdiv1;
+
+	__raw_writel(tmp, EXYNOS5_CLKDIV_CPU1);
+
+	while (__raw_readl(EXYNOS5_CLKDIV_STATCPU1) & 0x11)
+		cpu_relax();
+}
+
+static void set_apll(unsigned int new_index,
+			     unsigned int old_index)
+{
+	unsigned int tmp, pdiv;
+
+	/* 1. MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
+	clk_set_parent(moutcore, mout_mpll);
+
+	do {
+		cpu_relax();
+		tmp = (__raw_readl(EXYNOS5_CLKMUX_STATCPU) >> 16);
+		tmp &= 0x7;
+	} while (tmp != 0x2);
+
+	/* 2. Set APLL Lock time */
+	pdiv = ((exynos5_apll_pms_table[new_index] >> 8) & 0x3f);
+
+	__raw_writel((pdiv * 250), EXYNOS5_APLL_LOCK);
+
+	/* 3. Change PLL PMS values */
+	tmp = __raw_readl(EXYNOS5_APLL_CON0);
+	tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0));
+	tmp |= exynos5_apll_pms_table[new_index];
+	__raw_writel(tmp, EXYNOS5_APLL_CON0);
+
+	/* 4. wait_lock_time */
+	do {
+		cpu_relax();
+		tmp = __raw_readl(EXYNOS5_APLL_CON0);
+	} while (!(tmp & (0x1 << 29)));
+
+	/* 5. MUX_CORE_SEL = APLL */
+	clk_set_parent(moutcore, mout_apll);
+
+	do {
+		cpu_relax();
+		tmp = __raw_readl(EXYNOS5_CLKMUX_STATCPU);
+		tmp &= (0x7 << 16);
+	} while (tmp != (0x1 << 16));
+
+}
+
+bool exynos5250_pms_change(unsigned int old_index, unsigned int new_index)
+{
+	unsigned int old_pm = (exynos5_apll_pms_table[old_index] >> 8);
+	unsigned int new_pm = (exynos5_apll_pms_table[new_index] >> 8);
+
+	return (old_pm == new_pm) ? 0 : 1;
+}
+
+static void exynos5250_set_frequency(unsigned int old_index,
+				  unsigned int new_index)
+{
+	unsigned int tmp;
+
+	if (old_index > new_index) {
+		if (!exynos5250_pms_change(old_index, new_index)) {
+			/* 1. Change the system clock divider values */
+			set_clkdiv(new_index);
+			/* 2. Change just s value in apll m,p,s value */
+			tmp = __raw_readl(EXYNOS5_APLL_CON0);
+			tmp &= ~(0x7 << 0);
+			tmp |= (exynos5_apll_pms_table[new_index] & 0x7);
+			__raw_writel(tmp, EXYNOS5_APLL_CON0);
+
+		} else {
+			/* Clock Configuration Procedure */
+			/* 1. Change the system clock divider values */
+			set_clkdiv(new_index);
+			/* 2. Change the apll m,p,s value */
+			set_apll(new_index, old_index);
+		}
+	} else if (old_index < new_index) {
+		if (!exynos5250_pms_change(old_index, new_index)) {
+			/* 1. Change just s value in apll m,p,s value */
+			tmp = __raw_readl(EXYNOS5_APLL_CON0);
+			tmp &= ~(0x7 << 0);
+			tmp |= (exynos5_apll_pms_table[new_index] & 0x7);
+			__raw_writel(tmp, EXYNOS5_APLL_CON0);
+			/* 2. Change the system clock divider values */
+			set_clkdiv(new_index);
+		} else {
+			/* Clock Configuration Procedure */
+			/* 1. Change the apll m,p,s value */
+			set_apll(new_index, old_index);
+			/* 2. Change the system clock divider values */
+			set_clkdiv(new_index);
+		}
+	}
+}
+
+static void __init set_volt_table(void)
+{
+	unsigned int i;
+
+	exynos5250_freq_table[L0].frequency = CPUFREQ_ENTRY_INVALID;
+	exynos5250_freq_table[L1].frequency = CPUFREQ_ENTRY_INVALID;
+	exynos5250_freq_table[L2].frequency = CPUFREQ_ENTRY_INVALID;
+	exynos5250_freq_table[L3].frequency = CPUFREQ_ENTRY_INVALID;
+	exynos5250_freq_table[L4].frequency = CPUFREQ_ENTRY_INVALID;
+	exynos5250_freq_table[L5].frequency = CPUFREQ_ENTRY_INVALID;
+	exynos5250_freq_table[L6].frequency = CPUFREQ_ENTRY_INVALID;
+
+	max_support_idx = L7;
+
+	for (i = 0 ; i < CPUFREQ_LEVEL_END ; i++)
+		exynos5250_volt_table[i] = asv_voltage_5250[i];
+}
+
+int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
+{
+	int i;
+	unsigned int tmp;
+	unsigned long rate;
+
+	set_volt_table();
+
+	cpu_clk = clk_get(NULL, "armclk");
+	if (IS_ERR(cpu_clk))
+		return PTR_ERR(cpu_clk);
+
+	moutcore = clk_get(NULL, "mout_cpu");
+	if (IS_ERR(moutcore))
+		goto err_moutcore;
+
+	mout_mpll = clk_get(NULL, "mout_mpll");
+	if (IS_ERR(mout_mpll))
+		goto err_mout_mpll;
+
+	rate = clk_get_rate(mout_mpll) / 1000;
+
+	mout_apll = clk_get(NULL, "mout_apll");
+	if (IS_ERR(mout_apll))
+		goto err_mout_apll;
+
+	for (i = L0; i < CPUFREQ_LEVEL_END; i++) {
+
+		exynos5250_clkdiv_table[i].index = i;
+
+		tmp = __raw_readl(EXYNOS5_CLKDIV_CPU0);
+
+		tmp &= ~((0x7 << 0) | (0x7 << 4) | (0x7 << 8) |
+			(0x7 << 12) | (0x7 << 16) | (0x7 << 20) |
+			(0x7 << 24) | (0x7 << 28));
+
+		tmp |= ((clkdiv_cpu0_5250[i][0] << 0) |
+			(clkdiv_cpu0_5250[i][1] << 4) |
+			(clkdiv_cpu0_5250[i][2] << 8) |
+			(clkdiv_cpu0_5250[i][3] << 12) |
+			(clkdiv_cpu0_5250[i][4] << 16) |
+			(clkdiv_cpu0_5250[i][5] << 20) |
+			(clkdiv_cpu0_5250[i][6] << 24) |
+			(clkdiv_cpu0_5250[i][7] << 28));
+
+		exynos5250_clkdiv_table[i].clkdiv = tmp;
+
+		tmp = __raw_readl(EXYNOS5_CLKDIV_CPU1);
+
+		tmp &= ~((0x7 << 0) | (0x7 << 4));
+
+		tmp |= ((clkdiv_cpu1_5250[i][0] << 0) |
+			(clkdiv_cpu1_5250[i][1] << 4));
+
+		exynos5250_clkdiv_table[i].clkdiv1 = tmp;
+	}
+
+	info->mpll_freq_khz = rate;
+	/* 1000Mhz */
+	info->pm_lock_idx = L7;
+	/* 800Mhz */
+	info->pll_safe_idx = L9;
+	info->max_support_idx = max_support_idx;
+	info->min_support_idx = min_support_idx;
+	info->cpu_clk = cpu_clk;
+	info->volt_table = exynos5250_volt_table;
+	info->freq_table = exynos5250_freq_table;
+	info->set_freq = exynos5250_set_frequency;
+	info->need_apll_change = exynos5250_pms_change;
+
+	return 0;
+
+err_mout_apll:
+	clk_put(mout_mpll);
+err_mout_mpll:
+	clk_put(moutcore);
+err_moutcore:
+	clk_put(cpu_clk);
+
+	pr_err("%s: failed initialization\n", __func__);
+	return -EINVAL;
+}
+EXPORT_SYMBOL(exynos5250_cpufreq_init);