diff options
author | Joe Perches <joe@perches.com> | 2010-02-17 15:01:52 +0000 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2010-02-17 17:45:20 -0800 |
commit | 7995c64e5b56ec7fe6032e5fc586f726cde2152b (patch) | |
tree | b072d2e42f717d8f2c3d94e9431c48a3e8304f72 /drivers | |
parent | 3a9c6a4915e584663aebdb9016bcb9d3897dd779 (diff) |
drivers/net/bnx2x: Use (pr|netdev|netif)_<level> macro helpers
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Convert struct bnx2x member msglevel to msg_enable for netif_msg_<foo> macros
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Use netif_<level>
Coalesce long formats
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/bnx2x.h | 49 | ||||
-rw-r--r-- | drivers/net/bnx2x_link.c | 21 | ||||
-rw-r--r-- | drivers/net/bnx2x_main.c | 185 |
3 files changed, 117 insertions, 138 deletions
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index d997d8472ee..3c48a7a6830 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -44,7 +44,6 @@ /* error/debug prints */ #define DRV_MODULE_NAME "bnx2x" -#define PFX DRV_MODULE_NAME ": " /* for messages that are currently off */ #define BNX2X_MSG_OFF 0 @@ -58,30 +57,40 @@ #define DP_LEVEL KERN_NOTICE /* was: KERN_DEBUG */ /* regular debug print */ -#define DP(__mask, __fmt, __args...) do { \ - if (bp->msglevel & (__mask)) \ - printk(DP_LEVEL "[%s:%d(%s)]" __fmt, __func__, __LINE__, \ - bp->dev ? (bp->dev->name) : "?", ##__args); \ - } while (0) +#define DP(__mask, __fmt, __args...) \ +do { \ + if (bp->msg_enable & (__mask)) \ + printk(DP_LEVEL "[%s:%d(%s)]" __fmt, \ + __func__, __LINE__, \ + bp->dev ? (bp->dev->name) : "?", \ + ##__args); \ +} while (0) /* errors debug print */ -#define BNX2X_DBG_ERR(__fmt, __args...) do { \ - if (bp->msglevel & NETIF_MSG_PROBE) \ - printk(KERN_ERR "[%s:%d(%s)]" __fmt, __func__, __LINE__, \ - bp->dev ? (bp->dev->name) : "?", ##__args); \ - } while (0) +#define BNX2X_DBG_ERR(__fmt, __args...) \ +do { \ + if (netif_msg_probe(bp)) \ + pr_err("[%s:%d(%s)]" __fmt, \ + __func__, __LINE__, \ + bp->dev ? (bp->dev->name) : "?", \ + ##__args); \ +} while (0) /* for errors (never masked) */ -#define BNX2X_ERR(__fmt, __args...) do { \ - printk(KERN_ERR "[%s:%d(%s)]" __fmt, __func__, __LINE__, \ - bp->dev ? (bp->dev->name) : "?", ##__args); \ - } while (0) +#define BNX2X_ERR(__fmt, __args...) \ +do { \ + pr_err("[%s:%d(%s)]" __fmt, \ + __func__, __LINE__, \ + bp->dev ? (bp->dev->name) : "?", \ + ##__args); \ +} while (0) /* before we have a dev->name use dev_info() */ -#define BNX2X_DEV_INFO(__fmt, __args...) do { \ - if (bp->msglevel & NETIF_MSG_PROBE) \ - dev_info(&bp->pdev->dev, __fmt, ##__args); \ - } while (0) +#define BNX2X_DEV_INFO(__fmt, __args...) \ +do { \ + if (netif_msg_probe(bp)) \ + dev_info(&bp->pdev->dev, __fmt, ##__args); \ +} while (0) #ifdef BNX2X_STOP_ON_ERROR @@ -882,7 +891,7 @@ struct bnx2x { /* End of fields used in the performance code paths */ int panic; - int msglevel; + int msg_enable; u32 flags; #define PCIX_FLAG 1 diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index cf5778919b4..32e79c359e8 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -14,6 +14,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/errno.h> #include <linux/pci.h> @@ -2987,11 +2989,8 @@ static u8 bnx2x_verify_sfp_module(struct link_params *params) else vendor_pn[SFP_EEPROM_PART_NO_SIZE] = '\0'; - printk(KERN_INFO PFX "Warning: " - "Unqualified SFP+ module " - "detected on %s, Port %d from %s part number %s\n" - , bp->dev->name, params->port, - vendor_name, vendor_pn); + netdev_info(bp->dev, "Warning: Unqualified SFP+ module detected, Port %d from %s part number %s\n", + params->port, vendor_name, vendor_pn); return -EINVAL; } @@ -4846,16 +4845,8 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params, " has been detected on " "port %d\n", params->port); - printk(KERN_ERR PFX "Error: Power" - " fault on %s Port %d has" - " been detected and the" - " power to that SFP+ module" - " has been removed to prevent" - " failure of the card. Please" - " remove the SFP+ module and" - " restart the system to clear" - " this error.\n" - , bp->dev->name, params->port); + netdev_err(bp->dev, "Error: Power fault on Port %d has been detected and the power to that SFP+ module has been removed to prevent failure of the card. Please remove the SFP+ module and restart the system to clear this error.\n", + params->port); /* * Disable all RX_ALARMs except for * mod_abs diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index a4e8460ff65..7f9db47e8cc 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -514,24 +514,24 @@ static void bnx2x_fw_dump(struct bnx2x *bp) mark = REG_RD(bp, MCP_REG_MCPR_SCRATCH + 0xf104); mark = ((mark + 0x3) & ~0x3); - printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n", mark); + pr_err("begin fw dump (mark 0x%x)\n", mark); - printk(KERN_ERR PFX); + pr_err(""); for (offset = mark - 0x08000000; offset <= 0xF900; offset += 0x8*4) { for (word = 0; word < 8; word++) data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH + offset + 4*word)); data[8] = 0x0; - printk(KERN_CONT "%s", (char *)data); + pr_cont("%s", (char *)data); } for (offset = 0xF108; offset <= mark - 0x08000000; offset += 0x8*4) { for (word = 0; word < 8; word++) data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH + offset + 4*word)); data[8] = 0x0; - printk(KERN_CONT "%s", (char *)data); + pr_cont("%s", (char *)data); } - printk(KERN_ERR PFX "end of fw dump\n"); + pr_err("end of fw dump\n"); } static void bnx2x_panic_dump(struct bnx2x *bp) @@ -2136,7 +2136,7 @@ static void bnx2x_link_report(struct bnx2x *bp) { if (bp->flags & MF_FUNC_DIS) { netif_carrier_off(bp->dev); - printk(KERN_ERR PFX "%s NIC Link is Down\n", bp->dev->name); + netdev_err(bp->dev, "NIC Link is Down\n"); return; } @@ -2145,7 +2145,7 @@ static void bnx2x_link_report(struct bnx2x *bp) if (bp->state == BNX2X_STATE_OPEN) netif_carrier_on(bp->dev); - printk(KERN_INFO PFX "%s NIC Link is Up, ", bp->dev->name); + netdev_info(bp->dev, "NIC Link is Up, "); line_speed = bp->link_vars.line_speed; if (IS_E1HMF(bp)) { @@ -2157,29 +2157,29 @@ static void bnx2x_link_report(struct bnx2x *bp) if (vn_max_rate < line_speed) line_speed = vn_max_rate; } - printk("%d Mbps ", line_speed); + pr_cont("%d Mbps ", line_speed); if (bp->link_vars.duplex == DUPLEX_FULL) - printk("full duplex"); + pr_cont("full duplex"); else - printk("half duplex"); + pr_cont("half duplex"); if (bp->link_vars.flow_ctrl != BNX2X_FLOW_CTRL_NONE) { if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX) { - printk(", receive "); + pr_cont(", receive "); if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX) - printk("& transmit "); + pr_cont("& transmit "); } else { - printk(", transmit "); + pr_cont(", transmit "); } - printk("flow control ON"); + pr_cont("flow control ON"); } - printk("\n"); + pr_cont("\n"); } else { /* link_down */ netif_carrier_off(bp->dev); - printk(KERN_ERR PFX "%s NIC Link is Down\n", bp->dev->name); + netdev_err(bp->dev, "NIC Link is Down\n"); } } @@ -2898,10 +2898,8 @@ static inline void bnx2x_fan_failure(struct bnx2x *bp) bp->link_params.ext_phy_config); /* log the failure */ - printk(KERN_ERR PFX "Fan Failure on Network Controller %s has caused" - " the driver to shutdown the card to prevent permanent" - " damage. Please contact Dell Support for assistance\n", - bp->dev->name); + netdev_err(bp->dev, "Fan Failure on Network Controller has caused the driver to shutdown the card to prevent permanent damage.\n" + "Please contact Dell Support for assistance.\n"); } static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn) @@ -4296,7 +4294,7 @@ static void bnx2x_stats_update(struct bnx2x *bp) bnx2x_net_stats_update(bp); bnx2x_drv_stats_update(bp); - if (bp->msglevel & NETIF_MSG_TIMER) { + if (netif_msg_timer(bp)) { struct bnx2x_fastpath *fp0_rx = bp->fp; struct bnx2x_fastpath *fp0_tx = bp->fp; struct tstorm_per_client_stats *old_tclient = @@ -4306,7 +4304,7 @@ static void bnx2x_stats_update(struct bnx2x *bp) struct net_device_stats *nstats = &bp->dev->stats; int i; - printk(KERN_DEBUG "%s:\n", bp->dev->name); + netdev_printk(KERN_DEBUG, bp->dev, "\n"); printk(KERN_DEBUG " tx avail (%4x) tx hc idx (%x)" " tx pkt (%lx)\n", bnx2x_tx_avail(fp0_tx), @@ -4464,7 +4462,7 @@ static void bnx2x_stats_handle(struct bnx2x *bp, enum bnx2x_stats_event event) /* Make sure the state has been "changed" */ smp_wmb(); - if ((event != STATS_EVENT_UPDATE) || (bp->msglevel & NETIF_MSG_TIMER)) + if ((event != STATS_EVENT_UPDATE) || netif_msg_timer(bp)) DP(BNX2X_MSG_STATS, "state %d -> event %d -> state %d\n", state, event, bp->stats_state); } @@ -5674,8 +5672,7 @@ gunzip_nomem2: bp->gunzip_buf = NULL; gunzip_nomem1: - printk(KERN_ERR PFX "%s: Cannot allocate firmware buffer for" - " un-compression\n", bp->dev->name); + netdev_err(bp->dev, "Cannot allocate firmware buffer for un-compression\n"); return -ENOMEM; } @@ -5721,14 +5718,13 @@ static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len) rc = zlib_inflate(bp->strm, Z_FINISH); if ((rc != Z_OK) && (rc != Z_STREAM_END)) - printk(KERN_ERR PFX "%s: Firmware decompression error: %s\n", - bp->dev->name, bp->strm->msg); + netdev_err(bp->dev, "Firmware decompression error: %s\n", + bp->strm->msg); bp->gunzip_outlen = (FW_BUF_SIZE - bp->strm->avail_out); if (bp->gunzip_outlen & 0x3) - printk(KERN_ERR PFX "%s: Firmware decompression error:" - " gunzip_outlen (%d) not aligned\n", - bp->dev->name, bp->gunzip_outlen); + netdev_err(bp->dev, "Firmware decompression error: gunzip_outlen (%d) not aligned\n", + bp->gunzip_outlen); bp->gunzip_outlen >>= 2; zlib_inflateEnd(bp->strm); @@ -6213,8 +6209,8 @@ static int bnx2x_init_common(struct bnx2x *bp) if (sizeof(union cdu_context) != 1024) /* we currently assume that a context is 1024 bytes */ - printk(KERN_ALERT PFX "please adjust the size of" - " cdu_context(%ld)\n", (long)sizeof(union cdu_context)); + pr_alert("please adjust the size of cdu_context(%ld)\n", + (long)sizeof(union cdu_context)); bnx2x_init_block(bp, CDU_BLOCK, COMMON_STAGE); val = (4 << 24) + (0 << 12) + 1024; @@ -7020,11 +7016,10 @@ static int bnx2x_req_msix_irqs(struct bnx2x *bp) } i = BNX2X_NUM_QUEUES(bp); - printk(KERN_INFO PFX "%s: using MSI-X IRQs: sp %d fp[%d] %d" - " ... fp[%d] %d\n", - bp->dev->name, bp->msix_table[0].vector, - 0, bp->msix_table[offset].vector, - i - 1, bp->msix_table[offset + i - 1].vector); + netdev_info(bp->dev, "using MSI-X IRQs: sp %d fp[%d] %d ... fp[%d] %d\n", + bp->msix_table[0].vector, + 0, bp->msix_table[offset].vector, + i - 1, bp->msix_table[offset + i - 1].vector); return 0; } @@ -7480,8 +7475,8 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) } if (bp->flags & USING_MSI_FLAG) { bp->dev->irq = bp->pdev->irq; - printk(KERN_INFO PFX "%s: using MSI IRQ %d\n", - bp->dev->name, bp->pdev->irq); + netdev_info(bp->dev, "using MSI IRQ %d\n", + bp->pdev->irq); } } @@ -8303,8 +8298,7 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp) val3 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[8]); val4 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[12]); - printk(KERN_INFO PFX "part number %X-%X-%X-%X\n", - val, val2, val3, val4); + pr_info("part number %X-%X-%X-%X\n", val, val2, val3, val4); } static void __devinit bnx2x_link_settings_supported(struct bnx2x *bp, @@ -8915,17 +8909,15 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp) bnx2x_undi_unload(bp); if (CHIP_REV_IS_FPGA(bp)) - printk(KERN_ERR PFX "FPGA detected\n"); + pr_err("FPGA detected\n"); if (BP_NOMCP(bp) && (func == 0)) - printk(KERN_ERR PFX - "MCP disabled, must load devices in order!\n"); + pr_err("MCP disabled, must load devices in order!\n"); /* Set multi queue mode */ if ((multi_mode != ETH_RSS_MODE_DISABLED) && ((int_mode == INT_MODE_INTx) || (int_mode == INT_MODE_MSI))) { - printk(KERN_ERR PFX - "Multi disabled since int_mode requested is not MSI-X\n"); + pr_err("Multi disabled since int_mode requested is not MSI-X\n"); multi_mode = ETH_RSS_MODE_DISABLED; } bp->multi_mode = multi_mode; @@ -9351,7 +9343,7 @@ static u32 bnx2x_get_msglevel(struct net_device *dev) { struct bnx2x *bp = netdev_priv(dev); - return bp->msglevel; + return bp->msg_enable; } static void bnx2x_set_msglevel(struct net_device *dev, u32 level) @@ -9359,7 +9351,7 @@ static void bnx2x_set_msglevel(struct net_device *dev, u32 level) struct bnx2x *bp = netdev_priv(dev); if (capable(CAP_NET_ADMIN)) - bp->msglevel = level; + bp->msg_enable = level; } static int bnx2x_nway_reset(struct net_device *dev) @@ -10653,7 +10645,7 @@ static const struct { ((bnx2x_stats_arr[i].flags & STATS_FLAGS_BOTH) == STATS_FLAGS_PORT) #define IS_FUNC_STAT(i) (bnx2x_stats_arr[i].flags & STATS_FLAGS_FUNC) #define IS_E1HMF_MODE_STAT(bp) \ - (IS_E1HMF(bp) && !(bp->msglevel & BNX2X_MSG_STATS)) + (IS_E1HMF(bp) && !(bp->msg_enable & BNX2X_MSG_STATS)) static int bnx2x_get_sset_count(struct net_device *dev, int stringset) { @@ -11786,20 +11778,18 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev, rc = pci_enable_device(pdev); if (rc) { - printk(KERN_ERR PFX "Cannot enable PCI device, aborting\n"); + pr_err("Cannot enable PCI device, aborting\n"); goto err_out; } if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { - printk(KERN_ERR PFX "Cannot find PCI device base address," - " aborting\n"); + pr_err("Cannot find PCI device base address, aborting\n"); rc = -ENODEV; goto err_out_disable; } if (!(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) { - printk(KERN_ERR PFX "Cannot find second PCI device" - " base address, aborting\n"); + pr_err("Cannot find second PCI device base address, aborting\n"); rc = -ENODEV; goto err_out_disable; } @@ -11807,8 +11797,7 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev, if (atomic_read(&pdev->enable_cnt) == 1) { rc = pci_request_regions(pdev, DRV_MODULE_NAME); if (rc) { - printk(KERN_ERR PFX "Cannot obtain PCI resources," - " aborting\n"); + pr_err("Cannot obtain PCI resources, aborting\n"); goto err_out_disable; } @@ -11818,16 +11807,14 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev, bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM); if (bp->pm_cap == 0) { - printk(KERN_ERR PFX "Cannot find power management" - " capability, aborting\n"); + pr_err("Cannot find power management capability, aborting\n"); rc = -EIO; goto err_out_release; } bp->pcie_cap = pci_find_capability(pdev, PCI_CAP_ID_EXP); if (bp->pcie_cap == 0) { - printk(KERN_ERR PFX "Cannot find PCI Express capability," - " aborting\n"); + pr_err("Cannot find PCI Express capability, aborting\n"); rc = -EIO; goto err_out_release; } @@ -11835,15 +11822,13 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev, if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) == 0) { bp->flags |= USING_DAC_FLAG; if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) { - printk(KERN_ERR PFX "pci_set_consistent_dma_mask" - " failed, aborting\n"); + pr_err("pci_set_consistent_dma_mask failed, aborting\n"); rc = -EIO; goto err_out_release; } } else if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) { - printk(KERN_ERR PFX "System does not support DMA," - " aborting\n"); + pr_err("System does not support DMA, aborting\n"); rc = -EIO; goto err_out_release; } @@ -11856,7 +11841,7 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev, bp->regview = pci_ioremap_bar(pdev, 0); if (!bp->regview) { - printk(KERN_ERR PFX "Cannot map register space, aborting\n"); + pr_err("Cannot map register space, aborting\n"); rc = -ENOMEM; goto err_out_release; } @@ -11865,7 +11850,7 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev, min_t(u64, BNX2X_DB_SIZE, pci_resource_len(pdev, 2))); if (!bp->doorbells) { - printk(KERN_ERR PFX "Cannot map doorbell space, aborting\n"); + pr_err("Cannot map doorbell space, aborting\n"); rc = -ENOMEM; goto err_out_unmap; } @@ -11967,8 +11952,7 @@ static int __devinit bnx2x_check_firmware(struct bnx2x *bp) offset = be32_to_cpu(sections[i].offset); len = be32_to_cpu(sections[i].len); if (offset + len > firmware->size) { - printk(KERN_ERR PFX "Section %d length is out of " - "bounds\n", i); + pr_err("Section %d length is out of bounds\n", i); return -EINVAL; } } @@ -11980,8 +11964,7 @@ static int __devinit bnx2x_check_firmware(struct bnx2x *bp) for (i = 0; i < be32_to_cpu(fw_hdr->init_ops_offsets.len) / 2; i++) { if (be16_to_cpu(ops_offsets[i]) > num_ops) { - printk(KERN_ERR PFX "Section offset %d is out of " - "bounds\n", i); + pr_err("Section offset %d is out of bounds\n", i); return -EINVAL; } } @@ -11993,8 +11976,7 @@ static int __devinit bnx2x_check_firmware(struct bnx2x *bp) (fw_ver[1] != BCM_5710_FW_MINOR_VERSION) || (fw_ver[2] != BCM_5710_FW_REVISION_VERSION) || (fw_ver[3] != BCM_5710_FW_ENGINEERING_VERSION)) { - printk(KERN_ERR PFX "Bad FW version:%d.%d.%d.%d." - " Should be %d.%d.%d.%d\n", + pr_err("Bad FW version:%d.%d.%d.%d. Should be %d.%d.%d.%d\n", fw_ver[0], fw_ver[1], fw_ver[2], fw_ver[3], BCM_5710_FW_MAJOR_VERSION, BCM_5710_FW_MINOR_VERSION, @@ -12044,18 +12026,17 @@ static inline void be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n) target[i] = be16_to_cpu(source[i]); } -#define BNX2X_ALLOC_AND_SET(arr, lbl, func) \ - do { \ - u32 len = be32_to_cpu(fw_hdr->arr.len); \ - bp->arr = kmalloc(len, GFP_KERNEL); \ - if (!bp->arr) { \ - printk(KERN_ERR PFX "Failed to allocate %d bytes " \ - "for "#arr"\n", len); \ - goto lbl; \ - } \ - func(bp->firmware->data + be32_to_cpu(fw_hdr->arr.offset), \ - (u8 *)bp->arr, len); \ - } while (0) +#define BNX2X_ALLOC_AND_SET(arr, lbl, func) \ +do { \ + u32 len = be32_to_cpu(fw_hdr->arr.len); \ + bp->arr = kmalloc(len, GFP_KERNEL); \ + if (!bp->arr) { \ + pr_err("Failed to allocate %d bytes for "#arr"\n", len); \ + goto lbl; \ + } \ + func(bp->firmware->data + be32_to_cpu(fw_hdr->arr.offset), \ + (u8 *)bp->arr, len); \ +} while (0) static int __devinit bnx2x_init_firmware(struct bnx2x *bp, struct device *dev) { @@ -12068,18 +12049,17 @@ static int __devinit bnx2x_init_firmware(struct bnx2x *bp, struct device *dev) else fw_file_name = FW_FILE_NAME_E1H; - printk(KERN_INFO PFX "Loading %s\n", fw_file_name); + pr_info("Loading %s\n", fw_file_name); rc = request_firmware(&bp->firmware, fw_file_name, dev); if (rc) { - printk(KERN_ERR PFX "Can't load firmware file %s\n", - fw_file_name); + pr_err("Can't load firmware file %s\n", fw_file_name); goto request_firmware_exit; } rc = bnx2x_check_firmware(bp); if (rc) { - printk(KERN_ERR PFX "Corrupt firmware file %s\n", fw_file_name); + pr_err("Corrupt firmware file %s\n", fw_file_name); goto request_firmware_exit; } @@ -12138,12 +12118,12 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, /* dev zeroed in init_etherdev */ dev = alloc_etherdev_mq(sizeof(*bp), MAX_CONTEXT); if (!dev) { - printk(KERN_ERR PFX "Cannot allocate net device\n"); + pr_err("Cannot allocate net device\n"); return -ENOMEM; } bp = netdev_priv(dev); - bp->msglevel = debug; + bp->msg_enable = debug; pci_set_drvdata(pdev, dev); @@ -12160,7 +12140,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, /* Set init arrays */ rc = bnx2x_init_firmware(bp, &pdev->dev); if (rc) { - printk(KERN_ERR PFX "Error loading firmware\n"); + pr_err("Error loading firmware\n"); goto init_one_exit; } @@ -12171,12 +12151,11 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, } bnx2x_get_pcie_width_speed(bp, &pcie_width, &pcie_speed); - printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx," - " IRQ %d, ", dev->name, board_info[ent->driver_data].name, - (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4), - pcie_width, (pcie_speed == 2) ? "5GHz (Gen2)" : "2.5GHz", - dev->base_addr, bp->pdev->irq); - printk(KERN_CONT "node addr %pM\n", dev->dev_addr); + netdev_info(dev, "%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n", + board_info[ent->driver_data].name, + (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4), + pcie_width, (pcie_speed == 2) ? "5GHz (Gen2)" : "2.5GHz", + dev->base_addr, bp->pdev->irq, dev->dev_addr); return 0; @@ -12204,7 +12183,7 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev) struct bnx2x *bp; if (!dev) { - printk(KERN_ERR PFX "BAD net device from bnx2x_init_one\n"); + pr_err("BAD net device from bnx2x_init_one\n"); return; } bp = netdev_priv(dev); @@ -12237,7 +12216,7 @@ static int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state) struct bnx2x *bp; if (!dev) { - printk(KERN_ERR PFX "BAD net device from bnx2x_init_one\n"); + pr_err("BAD net device from bnx2x_init_one\n"); return -ENODEV; } bp = netdev_priv(dev); @@ -12269,7 +12248,7 @@ static int bnx2x_resume(struct pci_dev *pdev) int rc; if (!dev) { - printk(KERN_ERR PFX "BAD net device from bnx2x_init_one\n"); + pr_err("BAD net device from bnx2x_init_one\n"); return -ENODEV; } bp = netdev_priv(dev); @@ -12472,17 +12451,17 @@ static int __init bnx2x_init(void) { int ret; - printk(KERN_INFO "%s", version); + pr_info("%s", version); bnx2x_wq = create_singlethread_workqueue("bnx2x"); if (bnx2x_wq == NULL) { - printk(KERN_ERR PFX "Cannot create workqueue\n"); + pr_err("Cannot create workqueue\n"); return -ENOMEM; } ret = pci_register_driver(&bnx2x_pci_driver); if (ret) { - printk(KERN_ERR PFX "Cannot register driver\n"); + pr_err("Cannot register driver\n"); destroy_workqueue(bnx2x_wq); } return ret; |